Data Sheet DS/FIM/COMPONENTS-EN Rev. A

Industrial tablet PC, modem and accessories Field Device Management Tools

Highly flexible industrial tablet PC for harsh environments Measurement made easy

Install and run FIM-ABB Field Information Manager and other ABB software on a rugged tablet

Integrated Bluetooth 4.0, WLAN and optional LTE radio module and HART modem

Brilliant, high-resolution, bonded 10.1 touch LED display, also sunlight readable

Data capture with barcode and RFID scanner

Powerful Quad-Core processor for high working speed and long battery life

Freely configurable expansion interface for customer specific charging Extensive accessories

Rugged design for industrial use, including hazardous area

Change from one to two columns

Industrial tablet PC, modem and accessories Field Device Management Tools

Agile X 10.1" Tablet PC

Camera — 5 MP Auto-Focus Camera with LED Flash on rear — 2 MP Camera on front Network specifications Wireless LAN

IEEE 802.11 a/b/g/n

Bluetooth

Bluetooth 4.0 (Class I)

GPS

u-Blox Neo-6Q, up to 2.5 m accuracy

Optional LTE Module

EU: LTE, HSPA+, GSM/GPRS USA: LTE, HSPA+, GSM/GPRS/EDGE, EV-DO Rev. A, 1 x RTT

RFID support

M11117

Fig. 1:

Agile X 10.1" Tablet PC

Specifications CPU Intel BayTrail-M Quad-Core 1.8 GHz (turbo frequency up to 2.2 GHz) Memory System Memory: 8 GB SODIMM DDR3L-1600 Storage: 128 GB mSATA MLC SSD Operating system Windows 10 Professional (Service Pack 1 - 64 bit)

Internal RFID HF Reader (13.45 MHz)

Interface Under protective cover - for use only in safe area — 1 x Micro HDMI — 1 x 30-pin Combo Conn. (Giga-LAN or RS232) — 1 x USB 3.0 — 1 x Audio Combo Conn. (Mic in/Line Out) — 1 x Power Jack (DC) — 1 x Micro SD Slot Power supply Input voltage

12 ... 19 V DC

Adapter

100 ... 240 V AC, 50 ... 60 Hz / 19 V DC

Battery

Standard: Up to 6 h run time, 7.4 V, min. 5300 mAh Extended: up to 13 h run time, 7.4 V,

Display

min. 10,600 mAh

Size

10.1"

Resolution

1920 x 1200 pixel

Brightness

700 nits

Contrast Ratio

800:1

Touch

Projective Capacitive Touch (min. 4 points)

Front glass

Gorilla glass, 3 mm with hardness of 8H

Dimensions WxLxH

271.8 x 197.2 x 9 mm (10.7 x 7.76 x 0.75 inch)

Weight

1.5 kg (3.3 lb) with standard battery

Ambient conditions Audio 1 x Built-in Mic, 2 x 1 W Speaker Sensors Light sensor, G sensor, Gyrometer, E-compass

Shock resistance

Military grade device (MIL-STD-810G)

IP rating

IP 65 (IEC 60529)

Storage temperature

-30 ... 70 °C (-22 ... 158 °F)

Humidity

30 ... 90 % (non-condensing)

Change from two to one column

2 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless

1

2

3

u

4

t

5 p q

r s

6 7

8 9

o

nm l

k

j M11118

Fig. 2: Overview 1 I/O ports 2 Volume buttons 3 Function button 4 Internal RFID reader 5 Expansion port 6 Rear camera 7 Battery 8 Barcode scanner 9 Strap fixture j Tool-less battery hot swap k Stylus l Power button m Home button n Function button o Touch screen p Microphone q Front camera r Light sensor s Indicators t LTE module / SIM card slot u Speaker Change from one to two columns

Ex-marking

Ordering information

Ex marking - zone 2

Model

Bartec order number

ATEX

II 3G Ex ic IIA/IIC T5 Gc

Agile X 10'1 Tablet PC,

G7-A031-4051/11110000

II 3D Ex ic IIIB T90 °C Dc IP 54

non Ex, 5.3 Ah

(IIA when using hand strap Type 03-9849-0130)

Agile X 10'1 Tablet PC,

Ex certification: EPS 15 ATEX 1 823 X

Ex Zone 2, 5.3 Ah Agile X 10'1 Tablet PC,

IECEx

Ex ic IIA/IIC T5 Gc

B7-A234-4051/11110000 B7-A234-4011/11120000

EX Zone 2, 10.6 Ah

Ex ic IIIB T90 °C Dc IP 54 (IIA when using hand strap Type 03-9849-0130) Ex certification: IECEx EPS 15.0010X UL

Class I Div. 2 Groups A, B, C, D T4 A Ex certification: UL File E321557

Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 3

Industrial tablet PC, modem and accessories Field Device Management Tools

HART add-on module

Electrical data HART interface UI: ≥ 30 V DC, II: ≥ 130 mA, PI: ≥ 1 W, UO: ≥ 3 V DC, IO: ≥ 10 mA, PO:≥ 5 mW, Um: 60 V DC Maximum cable length: 1.8 m (5.9 ft)

1

Explosion protection Ex marking - zone 2 ATEX

II 3G Ex ic [ia Ga] IIC T4 Gc II 3D Ex ic [ia Da] IIIB T135 °C Dc Ex certification: EPS 15 ATEX 1 823 X

1 2

IECEx

Ex ic [ia Ga] IIC T4 Gc Ex ic [ia Da] IIIB T135 °C Dc4 Ex certification: IECEx EPS 15.0010X

NEC

Class I Division 2 Groups A, B, C and D Ex certification: UL File E321557

3 Ex marking - Tablet in non Ex areas M11119

ATEX

Ex certification: EPS 15 ATEX 1 069 X

Fig. 3: HART Add-on module 1 Add-on module 2 Test probes 3 Test leads IECEx

The HART add-on module is a new extension module for Agile X and offers a HART modem function. It may be connected to a HART loop as secondary master and facilitates applications such as configuring the HART devices. Due to the Windows operating system, the user can deploy many current software solutions in particular FDI based Field Information Manager by ABB and other software to make measurement easy. Agile X equipped with HART add-on module is the new safe solution when working in the Ex and in the non-Ex area: Parameterization, configuration, measurement and office tasks can be carried out much easier, faster and more safely.

II (2)G [ia Ga] IIC

[Ex ia] IIC Ga Ex certification: IECEx EPS 15.0065X

NEC

Use with intrinsically safe outputs in non-Ex areas

Ordering information Model

Bartec order number

Non Ex for Agile X

G7-A0Z0-0007

Ex Zone 2 for Agile X

B7-A2Z0-0033

Features — Integrated HART modem function on an industry tablet PC. — Supports FDI technology for easy field device management. — Mixed operation between Ex and non-Ex area possible.

4 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless

Change from two to one column

Accessories Power supply Li-Polymer battery

Description

Type

Order number

Maximum use is 1 battery per Tablet PC

7.4 V / 5300 mAh

B7-A2Z0-0028

Change battery only in non-Ex area

(39.22 Whr) 7.4 V / 10600 mAh

Ex Certification:

B7-A2Z0-0029

(78.44 Whr)

ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Division 2 M11120

Battery lock for Agile X (Ex)

Description

Type

Order number

Allows to prevent the accidental un-locking and remove of

Battery lock

03-9827-0004

Description

Type

Order number

1 Charging power supply

Charging Power

03-9911-0040

For non-hazardous area.

Supply

the battery. Ex Certification: ATEX Zone 2 / 22 IECEx Zone 2 / 22

M11134

UL Class I Division 2 Charging power supply for Agile X

Input voltage: 100 ... 240 V AC

1

Output voltage: 19 V DC, 3,42 A 2

Available with correct line cord for EU, UK, US and other. Country specific AC-line cord 2 must be ordered separately.

M11121

Vehicle charging cable for Agile X

2 Country specific AC-line cord

Version EU

03-9609-0022

For non-hazardous area.

Version US

03-9609-0023

AC Line cord - 3 wired with IEC 320-C5 connector.

Version UK

03-9609-0024

Description

Type

Order number

For non-hazardous area.

Vehicle charging

03-9914-0011

Input voltage: 11 ... 16 V DC and 22 ... 32 V DC

cable

Output voltage: DC 19 V (±5%), 3.42 A Operating temperature: 0 ... 40 °C (32 ... 104 °F)

M11122

Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 5

Industrial tablet PC, modem and accessories Field Device Management Tools

Docking stations Desktop docking station for Agile X

Description

Type

Order number

For non-hazardous area.

Desktop docking

03-9915-0017

Input voltage: 12 V DC, optional 9 ... 36 V DC

station

Charging of the Agile X with inserted battery Interfaces: 4 x USB 2.0, 1 x RS232, 1 x Ethernet 10/100 Mbit/s, 1 x VGA Useable with standard and extended battery. Further required components, must be ordered separately: — Charging power Supply: 03-9911-0040 M11123

Vehicle docking station for Agile X

— Country-specific AC-line cord

Description

Type

Order number

For non-hazardous area.

Vehicle docking

03-9915-0019

Input: 9 ... 36 V DC

station

Charging of the Agile X with inserted battery. Interfaces: 2 x USB 2.0, 1 x RS232 1 x Ethernet 10/100 Mbit/s 1 x SMA for external GPS antenna Useable with standard and extended battery. Further required components, must be ordered separately: Vehicle charging cable: 03-9914-0011 M11124

Table-top charger dual for Agile X

Description

Type

Order number

For non-hazardous area

Table-top charger

03-9914-0010

Input voltage: 10 ... 20 V DC (50 W)

dual

Two slot charging dock. Power level LED indicators. Buzzer to indicate battery is inserted. Supports up to 2 set of dock interconnected. Scope of Delivery: — Charging Power Supply: 03-9911-0040 M11125

— AC-line cord (EU): 03-9609-0022 — AC-line cord (US): 03-9609-0023 Information: Other AC line cord must order separately.

6 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless

Adapter cable LAN-Adapter for Agile X

Description

Type

Order number

For non-hazardous area.

LAN-Adapter

03-9919-0022

Description

Type

Order number

For non-hazardous area.

RS232 cable

03-9919-0023

Description

Type

Order number

For non-hazardous area.

Micro HDMI cable

03-9919-0024

Description

Type

Order number

Ex certification:

LTE radio module

03-9826-0128

ATEX Zone 2 / 22

EU

For LAN from 30 pin extension port. Connector: RJ45, female.

M11126

RS232 cable for Agile X

For RS232 from 30 pin extension port. DB9 Serial RS232 Cable, Male.

M11127

Micro HDMI cable for Agile X

Micro HDMI (Male) to HDMI (Male).

M11128

Radio modules LTE radio modules for Agile X

IECEx Zone 2 / 22 UL Class I Divison 2

M11129

4G / LTE Sierra MC7305-EU (Gobi5000) LTE, HSPA+, GSM / GPRS Ex certification:

LTE radio module

ATEX Zone 2 / 22

US

03-9826-0127

IECEx Zone 2 / 22 UL Class I Divison 2

M11130

4G / LTE Sierra MC7355-US (Gobi5000) LTE, HSPA+, GSM / GPRS / EDGE, EV-DO Rev. A,1 x RTT

Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 7

Industrial tablet PC, modem and accessories Field Device Management Tools

Additional accessories Shoulder strap for Agile X (Ex)

Description

Type

Order number

Ex certification

Shoulder strap

03-9849-0132

Description

Type

Order number

Ex certification

Hand strap

03-9849-0130

Description

Type

Order number

Ex certification

Stylus

03-9849-0131

Description

Type

Order number

Ex certification

Screen protector

B7-A2Z0-0031

ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 M11131

Only suited for gas group IIA — Allows ergonomic carrying. — Shoulder Strap with Pad. — Strap length adjustable.

Hand strap for Agile X (Ex)

ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 Only suited for gas group IIA — 1 pcs per package — To be mounted on the back side

M11132

Spare stylus for Agile X (Ex)

ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 M11133

— 1 pcs per package — With tether — Suitable for capacitive Touch Screen — With anti-scratch rubber tip Screen Protector for Agile X (Ex) —

ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 For gas group IIA, IIB and IIC — 5 pcs per package — 10,1'' Widescreen

8 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless

Notes

Notes

Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 9

Notes

Notes

10 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless

Notes

Notes

Notes

Notes

Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 11

To find your local ABB contact visit: www.abb.com/contacts For more product information visit: www.abb.com/measurement

Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. Copyright© 2016 ABB All rights reserved 3KXD152901R1001

DS/FIM/COMPONENTS-EN Rev. A 11.2016

Contact us