DOUBLE ACTING HYDRAULIC PUMP

REL-1915 ELECTRIC HIGH PRESSURE SINGLE/DOUBLE ACTING HYDRAULIC PUMP The REL-1915 portable Electric High Pressure Hydraulic Power Pump. This intermitte...
Author: Loraine Nash
1 downloads 0 Views 2MB Size
REL-1915 ELECTRIC HIGH PRESSURE SINGLE/DOUBLE ACTING HYDRAULIC PUMP The REL-1915 portable Electric High Pressure Hydraulic Power Pump. This intermittent duty two stage pumping system features a high pressure piston style pump, complimented by a low pressure pump for rapid tool advance. The 5/8 HP universal electric motor will operate from any 115V AC power supply.

FEATURES: 5/8 HP electric motor Two stage pumping system 10,000 PSI high pressure pump Designed for use with single or double-acting remote tools High-pressure relief valve Factory filled oil reservoir Hand control with 8‘ cord Carrying handle Optional carrying case Electric Motor 5/8 HP, 0.47kw, 3,000 RPM 115V AC 11 Full Load AMPS Electrical Control Body mount toggle switch and removable remote hand control with 8 foot twist lock cord. Oil Delivery Per Minute 160 cubic inches at 100 PSI 30 cubic inches at 10,000 PSI Oil Reservoir 3 quarts (.75 gallon)

Dimensions 8”W x 8”D x 15”H Pump Weight W/ Oil 35.72 pounds

Consult your RELIABLE representative for more information about our complete line of hydraulic tools.

REL-GB-10 or REL-EP-115 6 HP GASOLINE or 115V ELECTRIC SINGLE & DOUBLE ACTING HYDRAULIC PUMPS The REL-GB-10 and REL-EP-115 single and double acting hydraulic pumps feature manual lever operation, continuous duty performance, and a two stage pumping system, to ensure rapid tool advance. The manual lever control valve, and factory installed couplers are ready to run your single or double acting crimping, cutting and spearing tools. RELIABLE EQUIPMENT & SERVICE CO., INC. 92 Steamwhistle Drive • Ivyland, PA 18974 Call: 800-966-3530 • FAX: 215-357-9193 Visit our web sight: www.Reliable-Equip.com

REL-EP-115 - 1 hp electric 115V continuous duty motor. REL-EP-230 230V model is also available. REL-GB-10 - 6 HP Briggs/Stratton OHV 4 stroke gasoline engine. FEATURES: 10,000 PSI high pressure pump. Fast, two stage pumping system. Factory filled 2 gallon fluid reservoir with recessed sight glass. High-pressure relief valve. NO CONVERSION NECESSARY Single/Double selector knob. Integral manual lever control valve. Designed for use with high pressure single & double-acting, hydraulic tools. REL-GB-10 has a steel support frame. REL-EP-115 has a balanced carry handle.

REL-60DA

REL-60SA

REL-60 SERIES 60 TON HYDRAULIC COMPRESSION TOOL The REL-60 Series 60 ton press is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables. Operable from any 10,000 psi pumping source, these tools are portable for easy positioning. Available in two models: The REL-60SA will be the perfect compliment to any single acting system. The REL-60DA features double acting convenience to eliminate the possibility of jamming or hanging up. Accepts most shell type dies currently used with Alcoa, and Burndy 60 ton presses.

FEATURES: Lightweight Removable die cap for easy connector positioning. 3/8" Screw-type couplers Tool Stand & Steel Case included Model

REL-60

Output Weight

60 ton @ 10,000 psi

Dimensions Ram Stroke

47 lbs. 5"W x 17"H 1.5" travel

Oil Capacity

303 cc

CONTACT RELIABLE EQUIPMENT Call: 800-966-3530 Fax: 215-357-9193 4

Model Output Weight Dimensions Ram Stroke Oil Capacity

Breather valve allows easy conversion for operation with single acting systems.

REL-100SDA 100 ton 95 lbs. 8.25"W x 15"H .98" travel .66 pint

Suspension eye allows use for aerial operations

REL-100SDA 100 TON SINGLE/DOUBLE ACTING HYDRAULIC CRIMPING TOOL The REL-100SDA 100 ton press has been designed to compress sleeves and lugs on ACSR and ACAR full tension, transmission and substation connections. Operable from the REL-1915 electric/ hydraulic pump, REL-10-I intensifier, or any 3/4 hp, 10,000 psi hydraulic power source with an adequate reservoir. Accepts most 100 ton shell type dies currently used with Alcoa, Burndy, and other 100 ton presses. Double acting feature eliminates the possibility of jamming or hanging up. 4

FEATURES: Removable die cap for easy connector positioning. 3/8" Screw-type couplers Breather valve allows conversion to single acting Suspension eye included Steel case included Long Life Expectancy (tested to 50,000 cycles)

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193

PDY-1524

15 TON - DOUBLE ACTING - DIRECT CONNECT HYDRAULIC COMPRESSION TOOL

The PDY-1524 Double Acting Hydraulic 15 ton Crimping Head. Designed for connectors requiring 15 tons of crimping force. Features double-acting hydraulic power to eliminate die hang-up. Easy, one-hand operation, and a 360 O rotating head allow easy tool orientation for precision control of crimping cycle to improve safety and enhance reliability. The PDY-1524 accepts 15 ton “P” style dies to easily crimp connector sizes up to 1,250 MCM-CU. With an optional PU Adaptor this tool will accept standard Reliable 12 ton “U” style dies, as well as some dies from Burndy, Alcoa, Blackburn, and Thomas & Betts.

Weight: 16 lb. Length: 10.5 in. Width: 6 in.

SPECIFICATIONS System Jaw Capacity Crimping Force

Double-Acting 2" 30,000 lb.

Return Force Oper. Pressure Return Pressure Couplers Dies Accepted W/ PU Adaptor Head Rotation

3,350 lb. 10,000 psi (690 bar) 5,000 psi (345 bar) Direct Connect Y-46 or Equal Y-35 or Equal 360O

REL-46

Compatible with RELIABLE R15 and “P” Style dies.

15 TON SINGLE ACTING HYDRAULIC CRIMPING TOOL The REL-46 Single Acting Hydraulic 15 ton Crimping Head. Easy, one-hand operation, and 360 O rotating head allows easy head orientation for precision control of crimping to improve safety and reliability.

SPECIFICATIONS System Jaw Capacity

Single-Acting 2 inch

Crimping Force

24,300 lb.

Accepts R15 and “P” style dies to crimp connector sizes up to 1,250 MCM-CU.

Oper. Pressure

10,000 psi (690 bar)

With an optional PU adaptor this tool will accept Reliable R12 or “U” style dies as well as some dies from Alcoa, Burndy, Thomas & Betts, and Blackburn.

Dies Accepted

Y-46 or Equal

W/ PU Adaptor

Y-35 or Equal

Head Rotation

360O

Weight: Length: Width:

10 lbs. 10.5 inches 6 inches

Couplers

3/8 inch Female

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

REL-4000SA HYDRAULIC 4” CUTTING TOOL LIFTING EYE

FULL 4 INCH COPPER AND ALUMINUM CUTTING CAPACITY

HIGH PRESSURE COUPLER INSTALLED

REL-4000SA

SPECIFICATIONS

HYDRAULIC 4 INCH CUTTING TOOL

Weight:

17.5 lbs.

The REL-4000SA single acting hydraulic cutter has been designed to accommodate copper and aluminum conductor up to 4 inches in diameter. The body and handle have been designed to provide comfort, and to protect the operator from inadvertent contact with

Size:

15.6” x 10” x 4”

System

Hydraulic - 10,000 psi max.

Max. Cut

4 inch dia. (Cu. or Al.) DO NOT CUT STEEL

the blade or mechanism. The hardened steel blades will provide a clean cut with minimal distortion.

92 Steamwhistle Drive Ivyland, PA 18974 Phone: 800-966-3530 Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

4

Head opens for cable insertion along the line

Weight: 21 lb. Length: 17.5 in. Width: 7.5 in.

REL-3000SA SINGLE ACTING HYDRAULIC CUTTING TOOL The REL-3000SA guillotine-type cutter will make a straight, clean cut every time. These cutters can be used for cutting a wide range of electrical conductors. Head opens easily for inserting cable at any location along line. This Single-acting cutter will compliment existing single acting systems. The 360 O rotating head eliminates hose twisting and increases operator speed and comfort.

FEATURES • Lightweight, compact guillotine design provides a clean, positive cut. • Cutting head is easily opened for cable insertion at any location in line. • 360O head eliminates hose twisting. • Built-in Auxiliary Handle

System

Single-Acting

Capacity (Jaw Opening)

3.35 inch.

Force @ 10,000 psi (690 bar)

28,048 lb.

Return @ 5,000 psi (345 bar)

10,445 lb.

3000 SERIES - MAXIMUM CONDUCT OR CAP A CITY CONDUCTOR CAPA Soft Copper Jacket

3” 3”

Max Operating Pressure

10,000 psi (690 bar)

Aluminum Jacket

Max Return Pressure

5,000 psi (345 bar)

Lead Sheathed Cable

3.35”

Direct Connect

Communication Cable

3.35”

Couplers

Head opens for cable insertion along the line

Weight: 16.5 lb. Length: 17.5 in. Width: 6.5 in.

PDC-2000 SHOWN PCU-2000 INCLUDES COUPLERS

2000 SERIES

DOUBLE ACTING HYDRAULIC CUTTING TOOL This guillotine style cutter features up to a 2 inch cutting capacity, 360O rotating head, and a built-in auxiliary handle. These cutters can be used for cutting cable, wire rope, soft steel bolts, guy strand, ground rods, anchor bolts, and rebar. The PDC-2000 makes a straight, clean cut every time. System Capacity (Jaw Opening)

Double-Acting 2 inch.

2000 SERIES - MAXIMUM CONDUCT OR CAP A CITY CONDUCTOR CAPA Soft Copper Jacket

2”

Aluminum Jacket

2”

Lead Sheathed Cable

2”

Communication Cable

2”

ACSR

2”

Wire Rope

1”

Force @ 10,000 psi (690 bar)

28,048 lb.

Soft Steel Bolts

7/8”

Return @ 5,000 psi (345 bar)

10,445 lb.

Guy Strand

3/4”

Max Operating Pressure

10,000 psi (690 bar)

Ground Rod

3/4”

Max Return Pressure

5,000 psi (345 bar)

Anchor Bolts

3/4”

Rebar Grade 40

3/4”

Couplers

Direct Connect

Head opens for cable insertion along the line.

Weight: 16.5 lb. Length: 17.5 in. Width: 6.5 in.

REL-2000SA DOUBLE ACTING HYDRAULIC CUTTING TOOL This guillotine style cutter features up to a 2 inch cutting capacity, 360 O rotating head, and a built-in auxiliary handle. These cutters can be used for cutting cable, wire rope, soft steel bolts, guy strand, ground rods, anchor bolts, and rebar. The REL-2000SA

System Capacity (Jaw Opening) Force @ 10,000 psi (690 bar) Max Operating Pressure High Pressure Couplers

Double-Acting 2 inch.

2000 SERIES - MAXIMUM CONDUCT OR CAP A CITY CONDUCTOR CAPA Soft Copper Jacket Aluminum Jacket Lead Sheathed Cable Communication Cable ACSR Wire Rope Soft Steel Bolts Guy Strand Ground Rod Anchor Bolts Rebar Grade 40

2” 2” 2” 2” 2” 1” 7/8” 3/4” 3/4” 3/4” 3/4”

28,048 lb. 10,000 psi (690 bar) Female Screw Type

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

4

REL-58MC MANUAL HYDRAULIC CUTTING TOOL

6 TONS OF CUTTING FORCE REL-58MC MANUAL HYDRAULIC CUTTER Among the smallest hydraulic cutting tools available. Designed to cut copper, aldrey, aluminum, aluminum-steel cables, EHS guy wire and steel ropes having a max overall diameter of 1” and steel ground rod up to 5/8”. The tool features a double speed action. The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can rotate by 180 degrees, to enable the operator to work in the most comfortable position, and can easily be opened to allow the cutting of running cables. REL-58MC features an automatic safety valve to bypass oil when reaching maximum pressure; a pressure release device can also be operated at any stage of operation.

SPECIFICATIONS Length Weight

15.75 inches 7.7 lbs.

Pressure

10,000 psi (manual)

Capacity

1 in. Al., Guy Wire, Steel Rope 5/8 in. Steel Ground Rod

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

REL-2000MC MANUAL HYDRAULIC CUTTING TOOL

Weight: 18 lbs. Dimensions: 24” X 6” X 4”

REL-2000MC

MANUAL HYDRAULIC CUTTING TOOL This guillotine-type cutter will make a straight, clean cut every time. These cutters can be used for cutting a wide range of electrical conductors. The head opens easily for inserting cable at any location along the line. Designed to cut copper, aluminum, ACSR, guy wire, soft steel bolts, rebar, ground and anchor rod. Two-stage pumping piston for rapid advance, and twist handle release. Magnetic oil reservoir plug traps metal contaminants. The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can rotate by 360 degrees, enabling the operator to work in the most comfortable position, and can easily be opened to allow the cutting of running cables. REL-2000MC features an automatic safety valve to bypass oil when reaching maximum pressure; a pressure release device can also be operated at any stage of operation. 4

CAPACITY CU & AL WIRE

2”

ACSR

2”

LEAD SHEATHED CABLE

2”

SOFT STEEL BOLTS WIRE ROPES

1-1/4” 1”

REBAR

3/4”

GROUND & ANCHOR ROD

3/4”

STANDARD GUY WIRE*

3/4”

EHS GUY WIRE

5/8”

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

REL-1500H REL-3000H

W E N

MANUALLY LEVER OPERATED ROLLER CHAIN HOIST These two NEW hoists from RELIABLE promise to provide years of service, under the rigorous conditions demanded by the Power Utility & Construction Industry. The durable, malleable iron external frame and lever assemblies house internal components constructed and tested to provide smooth and safe operation.

FEATURES:

Manufactured to meet or exceed ASME B30.21.

Model

REL-1500H REL-3000H

Capacity:

1,500 lbs.

3,000 lbs.

Travel: Headroom:

56.5 inches 13 inches

57 inches 15 inches

Handle: Stroke:

18.75 inches 27 inches

18.75 inches 27 inches

Weight:

18 lbs.

22 lbs.

The lever action can be reversed simply by releasing the safety pin and rotating handle for inverted applications. Safety hooks rotate 360 O and feature spring latches to simplify a secure connection at the support and the load. The thumb latch releases chain for fast easy connection to the load. Slack may be quickly removed by pulling on the free end of the chain. Redundant safety measures prevent handle rotation or chain release under load if the operator were to lose control. The REL-1500H has been manufactured to handle a 3/4 ton load with ease. The REL-3000H utilizes a multiple chain configuration to offer a 1-1/2 ton capacity. The chain lug hook may be detached to provide a longer lift capacity and faster operation in 3/4 ton applications.

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com

W E N 11 0 2 r fo

REL-6000H MANUALLY LEVER OPERATED 3 TON ROLLER CHAIN HOIST The REL-6000H 3 ton hoist from RELIABLE promises to provide years of service, under the rigorous conditions demanded by the Power Utility & Construction Industry. The durable, malleable iron external frame and lever assemblies house internal components constructed and tested to provide smooth and safe operation.

FEATURES:

Manufactured to meet or exceed ASME B30.21.

Model

REL-6000H

Capacity:

6,000 lbs.

Travel: Headroom:

57 inches 17 1/2 inches

Handle: Stroke:

27 5/8 inches 42 inches

Weight:

34 lbs.

The lever action can be reversed simply by releasing the safety pin and rotating handle for inverted applications. Safety hooks rotate 360O and feature spring latches to simplify a secure connection at the support and the load. The thumb latch releases chain for fast easy connection to the load. Slack may be quickly removed by pulling on the free end of the chain. Redundant safety measures prevent handle rotation or chain release under load if the operator were to lose control. The REL-6000H hoist utilizes a multiple chain configuration to offer a 3 ton capacity. The chain lug hook may be detached to provide a longer lift capacity and faster operation in 1-1/2 ton applications.

92 Steamwhistle Drive • Ivyland, PA 18974 Phone: 800-966-3530 • Fax: 215-357-9193 Visit us on the web at www.Reliable-Equip.com