Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
Elektrische Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Vorwärts- und Rückwärts-Spitzensperrspannung Tvj = -40°C... Tvj max Kenndaten repetitive peak forward off-state and reverse voltages
VDRM,VRRM 4800 5200
5000 V V
Periodische Vorwärts- und Rückwärts-Spitzensperrspannung Tvj = 0°C... Tvj max repetitive peak forward off-state and reverse voltages
VDRM,VRRM 4950 5350
5150 V V
Durchlaßstrom-Grenzeffektivwert maximum RMS on-state current
ITRMSM
5600 A
Elektrische Eigenschaften
Dauergrenzstrom average on-state current
TC = 85 °C TC = 60 °C
ITAVM
2670 A 3600 A
Stoßstrom-Grenzwert surge current
Tvj = 25 °C, tP = 10 ms Tvj = Tvj max, tP = 10 ms
ITSM
55000 A 50000 A
Grenzlastintegral I²t-value
Tvj = 25 °C, tP = 10 ms Tvj = Tvj max, tP = 10 ms
I²t
15100 10³ A²s 12500 10³ A²s
Kritische Stromsteilheit critical rate of rise of on-state current
DIN IEC 60747-6 f = 50 Hz, iGM = 3 A, diG/dt = 6 A/µs
(diT/dt)cr
Kritische Spannungssteilheit critical rate of rise of off-state voltage
Tvj = Tvj max, vD = 0,67 VDRM th 5.Kennbuchstabe / 5 letter H
(dvD/dt)cr
Charakteristische Werte / Characteristic values Durchlaßspannung on-state voltage
Tvj = Tvj max , iT = 4000A
vT
typ. max.
1,95 V 2,1 V
Schleusenspannung threshold voltage
Tvj = Tvj max
V(TO)
typ. max.
1,032 V 1,09 V
Ersatzwiderstand slope resistance
Tvj = Tvj max
rT
typ. max.
0,231 mΩ 0,25 mΩ
Durchlaßkennlinie on-state characteristic
Tvj = Tvj max
typ.
300 A/µs
2000 V/µs
Zündstrom gate trigger current
Tvj = 25°C, vD = 6 V
IGT
0,6006 0,0000652 -0,00632 0,0181 0,659 0,0000694 -0,00642 0,01992 350 mA max.
Zündspannung gate trigger voltage
Tvj = 25°C, vD = 6 V
VGT
max.
2,5 V
Nicht zündender Steuerstrom gate non-trigger current
Tvj = Tvj max , vD = 6 V Tvj = Tvj max , vD = 0,5 VDRM
IGD
max. max.
20 mA 10 mA
Nicht zündende Steuerspannung gate non-trigger voltage
Tvj = Tvj max , vD = 0,5 VDRM
VGD
max.
0,4 V
Haltestrom holding current
Tvj = 25°C, vD = 6 V, RA = 5 Ω
IH
max.
350 mA
Einraststrom latching current
Tvj = 25°C, vD = 6 V, RGK ≥ 10 Ω IL iGM = 3 A, diG/dt = 6 A/µs, tg = 20 µs
max.
3 A
Vorwärts- und Rückwärts-Sperrstrom forward off-state and reverse current
Tvj = Tvj max vD = VDRM, vR = VRRM
i D, i R
max.
600 mA
Zündverzug gate controlled delay time
DIN IEC 60747-6 Tvj = 25 °C,iGM = 3 A, diG/dt = 6 A/µs
tgd
max.
v T = A + B ⋅ i T + C ⋅ Ln ( i T + 1) + D ⋅
iT
prepared by: J. Przybilla approved by: R. Keller
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
max.
date of publication: revision:
A B C D A B C D
2 µs
15.05.03 4
Seite/page
1/3
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutated turn-off time
Tvj = Tvj max, iTM = ITAVM
= 100 V, v = 0,67 V ThermischevdvEigenschaften /dt = 20 V/µs, -di /dt = 10 A/µs / 4 letter O Mechanische4.Kennbuchstabe Eigenschaften T =T RM
DM
D
Sperrverzögerungsladung recovered charge Rückstromspitze peak reverse recovery current
Thermische Eigenschaften / Thermal properties Innerer Wärmewiderstand thermal resistance, junction to case
Übergangs-Wärmewiderstand thermal resistance, case to heatsink
vj
tq
DRM
T th
vj max
iTM = ITAVM, -diT/dt = 10 A/µs VR = 0,5VRRM, VRM = 0,8VRRM Tvj = Tvj max iTM = ITAVM, -diT/dt = 10 A/µs VR = 0,5VRRM, VRM = 0,8VRRM
typ.
350
max.
13
max.
280
µs
Qr mAs
IRM
Kühlfläche / cooling surface beidseitig / two-sided, θ = 180°sin beidseitig / two-sided, DC Anode / anode, DC Kathode / cathode, DC
RthJC
Kühlfläche / cooling surface beidseitig / two-sided einseitig / single-sided
RthCH
max. max. max. max.
0,0054 0,005 0,009 0,0112
A
°C/W °C/W °C/W °C/W
max. 0,0015 °C/W max. 0,003 °C/W 125 °C
Höchstzulässige Sperrschichttemperatur maximum junction temperature
Tvj max
Betriebstemperatur operating temperature
Tc op
-40...+125 °C
Lagertemperatur storage temperature
Tstg
-40...+150 °C
Mechanische Eigenschaften / Mechanical properties Gehäuse, siehe Anlage case, see annex
Seite 3 page 3
Si-Element mit Druckkontakt Si-pellet with pressure contact Anpresskraft clamping force Steueranschlüsse control terminals
F DIN 46244
Gewicht weight
Gate Kathode /Cathode
63...91 A 4,8x0,8 A 6,3x0,8
G
typ.
3000 g
Kriechstrecke creepage distance Schwingfestigkeit vibration resistance
kN
49 mm f = 50 Hz
50 m/s²
Mit diesem Datenblatt werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehörigen technischen Erläuterungen. This data sheet specifies semiconductor devices, but promises no characteristics. It is valid in combination with the belonging technical notes.
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
2/3
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
Maßbild
1: Anode/Anode
4 5
2: Kathode/Cathode 1
2
4: Gate 5: Hilfskathode/ Cathode (control terminal)
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
3/3
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
R,t – Werte R R,T-Werte beidseitig two-sided
anodenseitg anode-sided
kathodenseitig cathode-sided
T 2401N
Analytische Elemente des transienten Wärmewiderstandes Z thJC Analytical elements of transient thermal impedance Z thJC Pos. n Rthn [°C/W]
τn [s] Rthn [°C/W]
τn [s] Rthn [°C/W]
τn [s]
1
2
0,00158 0,00216 2,05
0,25
0,00558 0,00216 7,2
0,25
0,00778 0,00216 10
0,25
3
4
5
0,00042
0,00055
0,00029
0,09
0,0195
0,0055
0,00042
0,00055
0,00029
0,09
0,0195
0,0055
0,00042
0,00055
0,00029
0,09
0,0195
0,0055
ZthJC =
Analytische Funktion / Analytical function:
6
nmax
Σ
n=1
Rthn 1 − e
7
-t
τn
0 ,0 1 2
c
0 ,0 1 a
th JC
Z
0 ,0 0 6
[K/W]
0 ,0 0 8
d 0 ,0 0 4
0 ,0 0 2
0 0 ,0 0 1
0 ,0 1
0 ,1
1
10
100
t [s ]
Transienter innerer Wärmewiderstand für DC/ Transient thermal impedance Z thJC = f(t) for DC Beidseitige Kühlung / Two-sided cooling Anodenseitige Kühlung / Anode-sided cooling Kathodenseitige Kühlung / Cathode-sided cooling
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
4/4
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
6000
Diagramme Diagramme
Durchlasskennlinie 5000
iT [V]
4000
ty p .
m a x.
3000
2000
1000
0 0
0,5
1
1,5
2
2,5
v T [V ]
Grenzdurchlaßkennlinie / Limiting on-state characteristic iT = f(vT) Tvj = Tvj max
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
5/5
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
30
Durchlassverluste
20
10
c 5
b a -40°C
2
+25°C
v G [V] +125°C 1
0,5
0,2
10
20
50
100
200
500
1000
2000
5000
10000
iG [mA]
Steuercharakteristik vG = f (iG) mit Zündbereichen für VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V Höchstzulässige Spitzensteuerverlustleistung / Maximum rated peak gate power dissipation PGM = f (tg) : a - 20 W/10ms
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
b - 40 W/1ms
c - 60 W/0,5ms
Seite/page
6/6
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
30
Tc beidseitig 25
Qr [mAs]
20
15
10
5
0 0
5
10
15
20
25
30
35
- d i/d t [ A /µ s ]
Sperrverzögerungsladung / Recovered charge Qr = f(-di/dt) Tvj=Tvjmax, vR=0,5 VRRM, VRM=0,8 VRRM
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
7/7
Datenblatt / Data sheet
N Netz-Thyristor Phase Control Thyristor
T 2401N
800
Ta bei Sinus 700
600
IRM [A]
500
400
300
200
100
0 0
5
10
15
20
25
30
35
- d i/d t [ A /µ s ]
Rückstromspitze / Peak reverse recovery current IRM = f(-di/dt) Tvj=Tvjmax, vR=0,5 VRRM, VRM=0,8 VRRM
BIP AM / SM PB, 2001-04-09, Przybilla J. / Keller
Seite/page
8/8
Nutzungsbedingungen Die in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen. In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistung übernehmen. Eine solche Gewährleistung richtet sich ausschließlich nach Maßgabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen. Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie zuständigen Vertriebsbüro in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Für Interessenten halten wir Application Notes bereit. Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie zuständigen Vertriebsbüro in Verbindung. Sollten Sie beabsichtigen, das Produkt in gesundheits- oder lebensgefährdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle - die gemeinsame Durchführung eines Risiko- und Qualitätsassessments; - den Abschluss von speziellen Qualitätssicherungsvereinbarungen; - die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängig machen. Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben. Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics. Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact). For those that are specifically interested we may provide application notes. Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you. Should you intend to use the Product in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend - to perform joint Risk and Quality Assessments; - the conclusion of Quality Agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures. If and to the extent necessary, please forward equivalent notices to your customers. Changes of this product data sheet are reserved.