CNG. PSB Industries. NG Series -- Natural Gas Dryers

CNG G G NG CNC CN PSB Industries PSB Industries PSB PSB Industries Industries NG Series - Natural Gas Dryers NG-SR | NG-SRD | NG-EV | NG-SV | NGR NG...
Author: Ralf Chandler
20 downloads 1 Views 2MB Size
CNG G G NG CNC CN

PSB Industries PSB Industries PSB PSB Industries Industries NG Series - Natural Gas Dryers NG-SR | NG-SRD | NG-EV | NG-SV | NGR

NG Series - Natural Gas Dryers NG NG Series Series --Natural Natural Gas Gas Dryers Dryers NG N G - S R Series | N G - S R D |-N Natural G - E V | N G - SV Gas | N G R Dryers NG-S N G-SR R | ||NG-SRD NG-SRD G- E- EVV| |N G- SV - SV| |N| NGNGR GRR NG-SR NG-SRD| ||NNG NG-EV | NG NG-SV

PSB Industries

PSB Industries Inc., General Air Division, specializes in the Design and Fabrication of compressed air, gas, and liquid dehydration and purification systems. Our standard and custom packaged systems remove moisture and contaminants from process streams. Adsorption technologies utilizing activated alumina, molecular sieve, activated carbon, and other selective adsorbents are employed to dehydrate, treat, and purify the fluid stream to the required exit specification. Catalyst systems are also designed and often incorporated within adsorption packages for purification. PSB units are installed worldwide and currently serve the Air Separation, Chemical, Petrochemical, Refining, Fuel Gas, and Electronics markets. PSB fabrication capabilities and quality of packaged systems are unmatched. Vessels, piping, structural, control panels, sandblasting, painting, instrumentation, insulation, testing, etc are completed under “one roof” to closely monitor and quickly react to scope changes. PSB “NG” series dryers are specifically designed for natural gas fueling stations and are available in wide range of single vessel or dual vessel sizes and configurations to suit each application. As gas supply pressure varies, PSB’s typical dryer pressure options range from 200 to 1525 psig maximum working pressures. The dryers are designed and manufactured in Erie, Pennsylvania, USA with certified quality system meeting ISO 9001:2008

ISO 9001:2008 CERTIFIED

2

www.p sbin dustries.com/a bout - us . ph p

CRN

NG-SR NGR NG-SR Single Single SingleVessel Vessel Vessel Natural Gas Manual Manual ManualRegeneration Regeneration Regeneration Regeneration Skid PSB PSB PSB PSB type type type type NG-SR NG-SR NG-SR NG-SR isis is is anan an an ideal ideal ideal ideal system system system system forfor for for drying drying drying drying small small small small to to to to medium medium medium medium volumes volumes volumes volumes of of of of natural natural natural natural gas gas gas gas for for for for stations stations stations stations with with with with PSB regeneration skids are used to regenerate single intermittent intermittent intermittent intermittent use. use. use. use. Each Each Each Each unit unit unit unit is is is is conservatively conservatively conservatively conservatively sized sized sized sized toto to to tower natural gas dryers that do not have an on board remove remove remove remove moisture moisture moisture moisture from from from from gas gas gas gas upstream upstream upstream upstream of of of of the the the the natural natural natural natural gas gas gas gas regeneration system. compressor(s). compressor(s). compressor(s). compressor(s). The system operates in a closed loop, utilizing a captive When When When When the the the the initial initial initial initial charge charge charge charge of of of desiccant desiccant desiccant desiccant has has has has reached reached reached reached volume of natural gas. of Once connected to the dryer vessel maximum maximum maximum maximum drying drying drying drying capacity, capacity, capacity, capacity, it it can it it can can can be be be be regenerated regenerated regenerated regenerated manually manually manually manually and properly vented, natural gas will begin flowing when with with with with the the the the operator operator operator operator initiated, initiated, initiated, initiated, external external external external regeneration regeneration regeneration regeneration package. package. package. package. the regeneration start button is initiated by the operator. A Ablower A“DDP” AA “DDP” “DDP” “DDP” Digital Digital Digital Digital Dew Dew Dew Dew Point Point Point Point Meter Meter Meter Meter is is is is provided provided provided provided to to to to indicate indicate indicate indicate pushes gas to the electric heater and the hot gas the the the the effluent effluent effluent effluent dew dew dew point, point, point, point, confirming confirming confirming performance, performance, performance, performance, and and and and need need need need flows to the dew vessel to beconfirming heated. The moisture held up on for for for for regeneration. regeneration. regeneration. regeneration. PSB’s PSB’s PSB’s PSB’s standard standard standard package package package includes includes includes factory factory factory the desiccant will then be carried back with the gas and fit fit fit fit pre pre pre pre filter filter filter filter for for for for removing removing removing removing dirt/aerosols dirt/aerosols dirt/aerosols dirt/aerosols and and and after after after after filter filter filter filter forfor for for flows to the regeneration skid. A heat and exchanger then removing removing removing removing desiccant desiccant desiccant desiccant dust. dust. dust. dust. cools the gas and condenses the water. The water is then efficiently removed from the gas stream and drains to the condensate sump. Cool gas then flows to the blower to be circulated to the heater again.

Flow Flow FlowDiagram: Diagram: Diagram:

After the desiccant has been adequately heated, the electric heater is de-energized and the blower continues to recycle gas to reduce the desiccant temperature. Once cooled, regeneration is complete.

Flow Diagram:

Dryer Design Features: Dryer Dryer DryerDesign Design DesignFeatures: Features: Features:

• NGR10 is designed to regenerate small, single vessel dryers (PSB model SV10 and smaller). and •• • •Adsorber Adsorber Adsorber Adsorber vessel vessel vessel vessel designed, designed, designed, designed, manufactured manufactured manufactured manufactured and and and stamped stamped stamped • per NGR21U iscoded designed to regenerate medium and small per per per ASME ASME ASME ASME coded coded coded Section Section Section Section VIII. VIII. VIII. VIII. Alternatives Alternatives Alternatives Alternatives available. available. available. available. single vessel dryers (PSB model SV21 and smaller). •• • •Piping Piping Piping Piping designed designed designed designed per per per per ASME ASME ASME ASME B31.3 B31.3 B31.3 B31.3

•• Compact to ease transportation between sites • • •NEMA NEMA NEMA NEMA / /NEC //design NEC NEC NEC electrical electrical electrical electrical construction construction construction construction standard standard standard standard •• Regeneration blower is hermetically sealedsieve insieve an ASME • • •Closed-loop Closed-loop Closed-loop Closed-loop regeneration regeneration regeneration regeneration ofof of of the the the the molecular molecular molecular molecular sieve sieve code stamped vessel adsorbent adsorbent adsorbent adsorbent

•• Electric regeneration heater, flanged immersion type, low • • •Three Three Three Three valve valve valve valve block block block block and and and and bypass bypass bypass bypass piping piping piping piping arrangement arrangement arrangement arrangement forfor for for watt density and heater sheath thermocouple included isolation isolation isolation isolation ofof of of the the the the dryer dryer dryer dryer for safety shutdown •• • •Pre Pre Pre Pre filter filter filter filter and and and and after after after after filter filter filter filter complete complete complete complete with with with with differential differential differential differential • pressure Air-cooled fin tube after cooler with motor pressure pressure pressure indicators indicators indicators indicators •• High efficiency separator and condensate sump • • •Insulated Insulated Insulated Insulated adsorber adsorber adsorber adsorber vessel vessel vessel vessel and and and and electric electric electric electric heater heater heater heater forfor for for heat heat heat heat • conservation Pressure relief valve, 200 mwp conservation conservation conservation

High heater sheath chamber and outlet temperature •• • •Incoloy Incoloy Incoloy Incoloy sheath sheath sheath sheath low low low low watt watt watt watt density density density density flanged flanged flanged flanged immersion immersion immersion immersion type type type type control and alarms are provided. electric electric electric electric heater heater heater heater • High after cooler outlet temperature alarm is provided

PSB PSB PSB Model Model Model NG-SR-5.0-1.5 NG-SR-5.0-1.5 NG-SR-5.0-1.5 NG-SR-6.5-2 NG-SR-6.5-2 NG-SR-6.5-2 NG-SR-10-2 NG-SR-10-2 NG-SR-10-2 NG-SR-10-3 NG-SR-10-3 NG-SR-10-3 NG-SR-15-3 NG-SR-15-3 NG-SR-15-3 NG-SR-15-4 NG-SR-15-4 NG-SR-15-4 NG-SR-21-3 NG-SR-21-3 NG-SR-21-3 NG-SR-21-4 NG-SR-21-4 NG-SR-21-4 NG-SR-21-6 NG-SR-21-6 NG-SR-21-6 NG-SR-30-6 NG-SR-30-6 NG-SR-30-6 NG-SR-42-6 NG-SR-42-6 NG-SR-42-6 NG-SR-42-8 NG-SR-42-8 NG-SR-42-8

• NEMA 4 electrical control panel contains the PLC which Dimensions Dimensions Dimensions Flow Flow Flow Capacity Capacity Capacity Process Process Process Package Package Package automatically controls the heating and cooling cycle upon Inches Inches Inches SCFM SCFM SCFM @@ @ PSIG PSIG PSIG Connections Connections Connections Weight Weight Weight 20/100 20/100 20/100 operator initiation Inches Inches Inches lbs. lbs. lbs. L LL WW W HHH 5.0 5.0 5.0 145 145 145 / 510 // 510 510 1.5 1.5 1.5 FLG FLG FLG 104 104 104 6868 68 103 103 103 3,780 3,780 3,780 • NEMA 7 contains the regeneration heater and motor 6.5 6.5 6.5 240 240 240 / 765 // 765 765 contactor/starters 2 2FLG 2 FLG FLG 104 104 104 6868 68 100 100 100 3,900 3,900 3,900 1010 10 240 240 240 / 820 // 820 820 2 2 FLG 2 FLG FLG 104 104 104 68 68 68 107 107 107 4,000 4,000 4,000 • Electrical rating is Class 1, Div 2 Group D 1010 10 525 525 525 / 1,375 // 1,375 1,375 3 3FLG 3 FLG FLG 104 104 104 6868 68 112 112 112 4,500 4,500 4,500 1515 15 525 525 525 / 1,400 // 1,400 1,400 3 3FLG 3 FLG FLG 104 104 104 6868 68 109 109 109 5,200 5,200 5,200 1515 15 615 615 615 / 2,160 // 2,160 2,160 4 4FLG 4 FLG FLG 104 104 104 6868 68 109 109 109 7,000 7,000 7,000 2121 21 525 525 525 / 1,700 // 1,700 1,700 3 3FLG 3 FLG FLG 132 132 132 8888 88 9797 97 6,520 6,520 6,520 Dimensions Regeneration Package 2121 21 900 900 900 / 2,300 // 2,300 2,300 4 4FLG 4 FLG FLG 132 132 132 8888 88 9797 97 7,500 7,500 7,500 FLA Inches PSB Model Connections Weight 2121 21 @ 460/3/60 1,900 1,900 1,900 / 2,500 / / 2,500 2,500 6 6 FLG 6 FLG FLG 132 132 132 88 88 88 104 104 104 7,900 7,900 7,900 Inches lbs. L W H 30 2,200 2,200 2,200 / 4,200 // 4,200 4,200 84 6476FLG 6 FLG FLG 132 132 132 8888 88 122 122 122 8,810 8,810 8,810 NGR10 3030 25.0 2” FLG 2,150 64 4242 42 162 162 162 105 105 105 141 141 141 14,500 14,500 14,500 2,500 2,500 2,500 / 5,000 // 5,000 5,000 114 6486FLG 6 FLG FLG 44.3 2,400 81 2” FLG NGR21U 4242 42for more details. Information 168 168 168 120 120 120 146 146 146 15,500 15,500 15,500 4,000 4,000 4,000 / 7,800 //subject 7,800 7,800to updates. 8 8FLG 8 FLG FLG See NGR bulletin

(1)(1) (1) MMSCF MMSCF MMSCF Capacity Capacity Capacity @@ @ 7 7lb. 7 lb. lb. HH O/MMSCF O/MMSCF 2H 222O/MMSCF

(1) See Page 4 Capacity Multiplier Chart

7 33 3

www.p www.p www.p sbsb sb inin in dustries.com/n dustries.com/n dustries.com/n gvgv gv / //

• See See See See NG-SR/SRD NG-SR/SRD NG-SR/SRD NG-SR/SRD bulletin bulletin bulletin bulletin forfor for for more more more more details. details. details. details. Information Information Information Information subject subject subject subject toto to to updates. updates. updates. updates.

NG-SRD NG-SRD

Dual Vessel Dual Vessel Manual Regeneration NG-SRD Manual Regeneration NG-SRD is the dual vessel version allowing for

N

Du Fu

continuous drying. While one vessel is drying

NG-SRD is the dual vessel version allowing for ual Vessel the other can be manually regenerated without continuous drying. While one vessel is drying interrupting the drying flow. the other can be manually regenerated without Manual Regeneration

interrupting the drying flow. Dual tower option is “NG-SRD-XX” Typical options G-SRD isequivalent the dual vessel version allowing for with NG-SR. Dual tower option “NG-SRD-XX” ntinuous drying. While oneisvessel is dryingTypical options equivalent with NG-SR. e other can be manually regenerated without errupting the drying flow.

Flow Diagram: Flow Diagram:

ual tower option is “NG-SRD-XX” Typical options uivalent with NG-SR.

low Diagram:

PSB larg use fro

Dryer Design Features: Dryer Design Features:

• Dual vessel design manufactured and stamped per ASME code Section VIII. Alternatives available. • Dual vessel design manufactured and stamped per ASME • Piping designed ASME B31.3. code Section VIII.per Alternatives available. • NEMA / NEC electrical construction • Piping designed per ASME B31.3. standard.

Dryer Design Features:

• of the molecular sieve • Closed-loop NEMA / NECregeneration electrical construction standard. • Dual vessel design manufactured and stamped per ASME adsorbent. • Closed-loop regeneration of the molecular sieve code Section VIII. Alternatives available. • Pre filter and after filter complete with differential adsorbent. • Piping designed perindicators. ASME B31.3. pressure • Pre filter and after filter complete with differential • NEMA /•NEC electrical construction Insulated adsorber vesselsstandard. and electric heater for heat pressure indicators. conservation. • Closed-loop regeneration of the molecular sieve • Insulated adsorber vessels and electric heater for heat adsorbent. • Incoloy sheath low watt density flanged immersion type conservation. electric • Pre filter and afterheater. filter complete with differential • Incoloy sheath low watt density flanged immersion type pressure indicators. electric heater. • Insulated adsorber vessels and electric heater for heat conservation. • Incoloy sheath low watt density flanged immersion type electric heater.

Dimensions Flow Capacity Process Package (1) MMSCF Capacity @ Inches SCFM @ PSIG Connections Weight 7 lb. H2O/MMSCF Dimensions Flow Capacity Process Package 20/100 Inches lbs. L W H (1) MMSCF Capacity @ Inches PSB Model SCFM @ PSIG Connections Weight 7 lb. H2O/MMSCF NG-SRD-6.5-2 6.5 240 / 765 2 FLG 124 80 102 5,600 L W H 20/100 Inches lbs. NG-SRD-10-3 10 525 / 1,375 3 FLG 153 5,900 72 102 NG-SRD-6.5-2 6.5 240 / 765 2 FLG 124 80 102 5,600 97 88 15 525 / 1,400 3 FLG 180 9,300 NG-SRD-15-3 NG-SRD-10-3 10 525 / 1,375 Process 3 FLG Dimensions 153 5,900 72 Package 102 Flow Capacity 97 88 180 15@ 615 / 2,160 4 FLG 9,400 NG-SRD-15-4 (1) MMSCF Capacity 97 PSB Model SCFM @ PSIG Connections3 FLG Inches Weight 88 15 525 / 1,400 180 9,300 NG-SRD-15-3 102 NG-SRD-21-4 7 lb. H2O/MMSCF 21 900 / 2,300 4 FLG 192 11,600 88 20/100615 / 2,160 Inches 4 FLGL lbs. 97 88 180 15 9,400 NG-SRD-15-4 W H NG-SRD-30-6 122 192 30 2,200 / 4,200 6 FLG 88 15,000 102 NG-SRD-21-4 21 900 / 2,300 2 FLG 4 FLG 192 10288 11,600 NG-SRD-6.5-2 6.5 240 / 765 124 80 5,600 NG-SRD-38-6 38 2,500 / 5,000 6 FLG 218 114 141 19,000 NG-SRD-30-6 122 NG-SRD-10-3 30 2,200 / 4,200 3 FLG 6 FLG 88 10 525 / 1,375 153 5,900 15,000 72192 102 42 4,000 / 7,800 238 120 143 21,000 NG-SRD-42-8 8 FLG NG-SRD-38-6 38 2,500 / 5,000 3 FLG 6 FLG 88218 97114 141 15 525 / 1,400 180 9,300 19,000 NG-SRD-15-3 NG-SR/SRD for more88 details. Information subject21,000 to updates. 42 4,000 / See 7,800 238 97 120 143 NG-SRD-42-8 8 FLG 180 15 615 / 2,160 4 FLG bulletin 9,400 NG-SRD-15-4 102 NG-SRD-21-4 21 900 / 2,300 4 FLG bulletin192 11,600 See NG-SR/SRD for more88 details. Information subject to updates. NG-SRD-30-6 122 192 30 2,200 / 4,200 6 FLG 88 15,000 NG-SRD-38-6 38 2,500 / 5,000 6 FLG 218 114 141 19,000 42 4,000 / 7,800 238 120 143 21,000 NG-SRD-42-8 8 FLG PSB Model

4

www.p sbin dustries.com/n gv /

4

www.p sbin dustries.com/n gv /

See NG-SR/SRD bulletin for more details. Information subject to updates.

Con des ves pla

“DD effl

PSB for des

Fl

NG-EV NGR NG-EV NG-EV Dual Vessel

Fully Automatic Regeneration Dual DualVessel Vessel Natural Gas Fully Fully Automatic Automatic Regeneration PSB type NG-EV is an idealRegeneration system for drying medium to Regeneration Skid large volumes of natural gas for stations with continuous

use. Each unit is conservatively sized to remove moisture PSB PSB type type NG-EV NG-EV is is anan ideal ideal system system forfor drying drying medium medium toto from gas upstream the natural gas compressor(s). large large volumes volumes of of natural natural gas gas for for stations stations with with continuous continuous PSB regeneration skids are used to regenerate single use. use.Each Each unit unit is is conservatively conservatively sized toto remove remove moisture moisture tower natural gas dryers do sized not have an on board Continuous operation isthat assumed with the dual vessel from from gas gas upstream upstream the the natural natural gas gas compressor(s). compressor(s). regeneration system. design. While one vessel is on stream drying, the other

vessel is regenerating or in standby mode and ready to be Continuous Continuous operation operation is a is assumed assumed with with the the dual dual vessel The system operates in closed loop, utilizing avessel captive placed back on stream. design. design. While While one one vessel vessel is is on on stream stream drying, drying, the the other other volume of natural gas. Once connected to the dryer vessel vessel vessel is is regenerating regenerating or or in in standby standby mode mode and and ready ready toto bebe and properly vented, natural gas will begin flowing when “DDP” Digital Dew Point Meter is provided to indicate the placed placed back back on on stream. stream. the regeneration startconfirming button is performance. initiated by the operator. A effluent dew point, blower pushes gas to the electric heater and the hot gas “DDP” “DDP” Digital Dew Dew Point Meter is is provided provided toto indicate indicate the the flows toDigital the vessel toPoint be Meter heated. The moisture held up on PSB’s standard package includes factory fit pre filter effluent effluent dew dew point, point, confirming confirming performance. performance. the desiccant will then be carried back with the gas and for removing dirt/aerosols and after filter for removing flows to the dust. regeneration skid. A heat exchanger then desiccant PSB’s PSB’s standard standard package package includes includes factory factory fitfit pre pre filter filter cools the gas and condenses the water. The water is then for for removing removing dirt/aerosols dirt/aerosols and and after after filter filter for for removing removing efficiently removed from the gas stream and drains to the desiccant desiccant dust. dust. condensate sump. Cool gas then flows to the blower to be circulated to the heater again.

Flow Diagram:

Flow FlowDiagram: Diagram:

After the desiccant has been adequately heated, the electric heater is de-energized and the blower continues to recycle gas to reduce the desiccant temperature. Once cooled, regeneration is complete.

Flow Diagram:

Dryer Design Features: Dryer Design Features: •Dryer Dual vessel design manufactured and stamped per ASME Dryer Design Design Features: Features:

code Section VIII. to Alternatives • NGR10 is designed regenerateavailable. small, single vessel dryers (PSB model SV10 and smaller). Piping designed per ASME B31.3. • •Dual Dual vessel vessel design design manufactured manufactured and and stamped stamped per per ASME ASME • •NGR21U code code Section Section is designed VIII. VIII. Alternatives Alternatives to regenerate available. available. medium and small NEMA / NEC electrical construction standard. single vessel dryers (PSB model SV21 and smaller). •• Piping designed designed per per ASME ASME B31.3. • Piping Closed-loop regeneration ofB31.3. the molecular sieve • to ease transportation between sites adsorbent. • •Compact NEMA NEMA / NEC /design NEC electrical electrical construction construction standard. standard. • blower is hermetically sealed insieve an ASME Pre filter and after filter complete with differential • •Regeneration Closed-loop Closed-loop regeneration regeneration ofof the the molecular molecular sieve code stamped vessel pressure indicators. adsorbent. adsorbent. • Electric regeneration heater, flanged immersion low Insulated adsorber vessels and with electric heatertype, for heat • •Pre Pre filter filter and and after after filter filter complete complete with differential differential watt density and heater sheath thermocouple included conservation. pressure pressure indicators. indicators. for safety shutdown Incoloy sheath lowvessels watt density flanged immersion type • •Insulated Insulated adsorber adsorber vessels and and electric electric heater heater forfor heat heat • Air-cooled fin tube after cooler with motor electric heater. conservation. conservation. • efficiency separator and condensate sump type • •High Incoloy Incoloy sheath sheath low low watt watt density density flanged flanged immersion immersion type • Pressure relief valve, 200 mwp electric electric heater. heater.

• High heater sheath chamber and outlet temperature control and alarms are provided.

Dimensions Process Package (1) MMSCF Capacity @ • High after cooler outlet temperature alarm is provided Inches PSB Model Weight • Connections NEMA 4 electrical control panel contains the PLC which 7 lb. H2O/MMSCF Dimensions automatically the heating and cooling cycle upon Process Process Package Package Inches controls LDimensions lbs. W H (1) (1)MMSCF MMSCFCapacity Capacity@@ operator initiation Inches PSB PSB Model Model Connections Connections Weight Weight NG-EV33 5.0 2 FLG 120 Inches 68 104 5,500 7 7lb.lb.HH 2O/MMSCF 2O/MMSCF • NEMA 7 contains the regeneration heater and motor Inches Inches lbs. lbs. L W68 W H H 6.5 2FLG /3 FLG L138 104 6,000 NG-EV45 contactor/starters NG-EV33 NG-EV33 5.0 5.0 2 2FLG FLG 120 6868 104 5,500 5,500 10 144 104 6,800 2FLG /3 FLG 120 NG-EV70 • Electrical rating is Class 1, Div 2 Group D 6.5 6.5 2FLG 2FLG /3FLG FLG 138 138 6872 68 104 104 6,000 6,000 NG-EV105 NG-EV45 NG-EV45 15 3/3 FLG 160 112 9,000 1017 10 144 6872 68 104 104 6,800 6,800 2FLG 2FLG /3FLG FLG 144 NG-EV70 NG-EV70 NG-EV120 4/3 FLG 160 120 10,000 NG-EV105 NG-EV105 15 15 3 3 FLG FLG 160 160 72 72 112 112 9,000 9,000 NG-EV150 21 4 168 88 120 11,900 NG-EV120 NG-EV120 1717 FLG 160 72 72 120 120 10,000 10,000 NG-EV210 30 6FLG 204 108 124 17,000 Dimensions 160 Regeneration 4 4 Package FLA Inches PSB Model Connections Weight NG-EV150 NG-EV150 21 21 4 4 FLG FLG 168 168 88 88 120 120 11,900 11,900 NG-EV280 8 240 120 144 20,000 @ 40 460/3/60 Inches lbs. L W H NG-EV210 NG-EV210 30 30 6 6 FLG FLG 204 204 108 108 124 124 17,000 17,000 51 884 47 64 2402,150120 144 22,000 NG-EV360 NGR10 25.0 2” FLG NG-EV280 NG-EV280 NGR21U 4040 8114 8FLG FLG 240 120 120 Information 144 144 subject 20,000 20,000 44.3 48 bulletin 2,400 81240 2” FLG See NG-EV for more details. to updates. 5 NG-EV360 www.p sb in dustries.com/n gv / details. Information subject8 to8FLG updates. 5151 FLG 240 240 120 120 144 144 22,000 22,000 NG-EV360See NGR bulletin for more 75 5

www.p dustries.com/n www.p s bsb sin b in dustries.com/n gvgv //

See See NG-EV NG-EV bulletin bulletin forfor more more details. details. Information Information subject subject to to updates. updates.

NG-SV Single Vessel Natural Gas Dryer PSB type NG-SV is an ideal system for drying small volumes of natural gas for stations with intermittent use. Each unit is conservatively sized to remove moisture from gas upstream of the natural gas compressor. When the initial charge of desiccant has reached maximum drying capacity, it can either be replaced or regenerated with an external regeneration package, consult PSB for more information. An optional “DDP” Digital Dew Point meter will provide indication of effluent dew point confirming performance or need for desiccant replacement/regeneration.

Dryer Design Features:

PSB’s standard package includes factory fit pre-filter and particulate after-filter.

• Adsorber vessel designed, manufactured, and per ASME code Section VIII. *Alternatives available • Stainless steel desiccant screens

Flow Diagram:

• Installed pre-filter & after-filter • Three valve system block and bypass package • Initial charge of desiccant • Two (2) manual regeneration valves on NG-SV-3.0-1.5 and larger models • Modular design matches regeneration package

Typical Options: • DDP – Digital Dew Point Meter with 2 alarms (CL 1, DIV 2, GR C, D) • MI – Color change moisture indicator • Higher design pressure (> 200 PSIG) • Vessel insulation • Regeneration skid, see NGR bulletin

PSB Model NG-SV-1.5-1.0 NG-SV-3.0-1.5 NG-SV-5.0-1.5 NG-SV-6.5- 2 NG-SV-10-2 NG-SV-10-3 NG-SV-15-3 NG-SV-15-4 NG-SV-21-3 NG-SV-21-4

(1) MMSCF Capacity @ 7 lb. H2O/MMSCF 1.5 3.0 5.0 6.5 10 10 15 15 21 21

(1) See Page 4 Capacity Multiplier Chart

6

www.p sbin dustries.com/n gv /

Flow Capacity SCFM @ PSIG 20/100 50 / 100 145 / 510 145 / 510 240 / 765 240 / 820 525 / 1,375 525 / 1,400 615 / 2,160 525 / 1,700 900 / 2,300

Process Connections Inches 1 NPT 1.5 FLG 1.5 FLG 2 FLG 2 FLG 3 FLG 3 FLG 4 FLG 3 FLG 4 FLG

Dimensions Inches L W H 28 88 20 34 50 94 96 50 34 40 96 50 40 101 50 50 48 101 57 110 52 120 57 52 92 76 79 72 66 110

Package Weight lbs. 430 950 1,225 1,750 2,200 2,470 2,750 7,950 3,700 4,400

See NG-SV bulletin for more details. Information subject to updates.

NGR NGRNGR NGR NGR Natural Gas

Regeneration atural Gas Gas Natural Natural Natural Gas Gas Skid Natural Gas egeneration Skid Skid Regeneration Regeneration Regeneration Skid Skid Regeneration Skid PSB regeneration skids are used to regenerate single

tower natural gas dryers that do not have an on board regeneration B regeneration skids system. are used to regenerate single PSB PSB PSB regeneration regeneration regeneration skids skids skids are are are used used used to to to regenerate regenerate regenerate single single single PSB regeneration skids are used toon regenerate single wer natural gas dryers that do not have an board tower tower tower natural natural natural gas gas gas dryers dryers dryers that that that do do do not not not have have have an an an on on on board board board tower natural gas dryers that doloop, not have an on board The system operates in a closed utilizing a captive generation system. regeneration regeneration regeneration system. system. system. regeneration system. volume of natural gas. Once connected to the dryer vessel and properly vented, natural gasloop, will flowing when e system operates in a closed loop, utilizing abegin captive The The The system system system operates operates operates in inin in aaaclosed aclosed closed loop, loop, utilizing utilizing utilizing aaacaptive acaptive captive The system operates closed loop, utilizing captive the regeneration start button is initiated by the operator. A lume ofvolume natural gas. Once connected to the dryer vessel volume volume of ofof natural natural natural gas. gas. gas. Once Once Once connected connected connected to toto to the the the dryer dryer dryer vessel vessel vessel volume of natural gas. Once connected the dryer vessel blower pushes gas to the electric heater and the hot gas d properly vented, natural gas will begin flowing when and and and properly properly properly vented, vented, vented, natural natural natural gas gas gas will will will begin begin begin flowing flowing flowing when when when flows tostart the vessel to heated. Theoperator. moisture held up onAAA e regeneration button is be initiated by the A the the the regeneration regeneration regeneration start start start button button button is is is initiated initiated initiated by by by the the the operator. operator. operator. thedesiccant regeneration startheater button is initiated by thegas operator. A the will then be carried back with the and ower pushes gas to the electric and the hot gas blower blower blower pushes pushes pushes gas gas gas to toto to the the the electric electric electric heater heater heater and and and the the the hot hot hot gas gas gas blower pushes gas the electric heater and the hot gas flows to the regeneration skid. AThe heat exchanger then ws to the vessel tothe be heated. The moisture held up onheld flows flows flows to toto the the vessel vessel vessel to toto be be be heated. heated. heated. The The moisture moisture moisture held held up up up on on on cools the gas and condenses the water. The water is then e desiccant will then be carried back with the gas and the the the desiccant desiccant desiccant will will will then then then be be be carried carried carried back back back with with with the the the gas gas gas and and and the desiccant will then be carried backthen with gastoand efficiently removed from the gas and the drains ws to the regeneration skid. A heat exchanger flows flows flows to toto the the the regeneration regeneration regeneration skid. skid. skid. AAheat Astream heat heat exchanger exchanger exchanger then then thenthe condensate sump. Cool gas then flows to the blower to be ols the gas and condenses the water. The water is then cools cools cools the the the gas gas gas and and and condenses condenses condenses the the the water. water. water.The The The water water water isis then then then cools the gas and condenses the water. The water isis then circulated to the heater again. ficiently efficiently removed from the gas stream and drains to the • NGR10 is designed to regenerate small, single vessel efficiently efficiently removed removed removed from from from the the the gas gas gas stream stream stream and and and drains drains drains to toto the the the ndensate sump. Cool gas then flows to the blower to be dryers (PSB model SV10 and smaller). condensate condensate condensate sump. sump. sump. Cool Cool Cool gas gas gas then then then flows flows flows to toto the the the blower blower blower to toto be be be After the desiccant has been adequately heated, the culatedcirculated to the heater again. • NGR10 is designed to regenerate small, single vessel circulated circulated to toto the the the heater heater heater again. again. NGR21U is designed to regenerate medium and small ••• NGR10 NGR10 isisisis designed designed designed to to to regenerate regenerate regenerate small, small, small, single single single vessel vessel vessel circulated to the heateragain. again. •NGR10 NGR10 designed to regenerate small, single vessel electric heater is de-energized and the blower continues dryers (PSB model SV10 and smaller). single vessel dryers (PSB model SV21 and smaller). dryers dryers dryers (PSB (PSB (PSB model model model SV10 SV10 SV10 and and and smaller). smaller). smaller). dryers (PSB model SV10 and smaller). to recycle gas to reduce the desiccant ter the desiccant has been adequately heated, temperature. the After After After the the the desiccant desiccant desiccant has has has been been been adequately adequately adequately heated, heated, heated, the the theOnce• NGR21U is designed to regenerate medium and small After the desiccant has been adequately heated, the Compact design to ease transportation between sites • • • NGR21U NGR21U NGR21U isis designed designed designed to to to regenerate regenerate regenerate medium medium medium and and and small small small cooled, regeneration is complete. ectric heater is de-energized and the blower continues • NGR21U isis designed to regenerate medium and small electric electric electric heater heater heater isisis is de-energized de-energized de-energized and and and the the the blower blower blower continues continues continues single vessel dryers (PSB model SV21 andSV21 smaller). electric heater de-energized and the blower continues single single single vessel vessel vessel dryers dryers dryers (PSB (PSB (PSB model model model SV21 SV21 and and and smaller). smaller). smaller). recycle to gas to reduce the desiccant temperature. Once • Regeneration is hermetically sealed in an ASME single vessel blower dryers (PSB model SV21 and smaller). toto recycle recycle recycle gas gas gas to toto to reduce reduce reduce the the the desiccant desiccant desiccant temperature. temperature. temperature. Once Once Once to recycle gas reduce the desiccant temperature. Once • Compact design to design ease transportation between sites oled, regeneration is complete. code stamped vessel • • • Compact Compact Compact design design to to to ease ease ease transportation transportation transportation between between between sites sites sites cooled, cooled, cooled, regeneration regeneration regeneration isisis complete. complete. complete. • Compact design to ease transportation between sites cooled, regeneration is complete. • Regeneration blower is hermetically sealed in an ASME Electric regeneration heater, flangedsealed immersion type, low ••• Regeneration Regeneration blower blower blower isis is hermetically hermetically hermetically sealed sealed ininin in an an an ASME ASME ASME •Regeneration Regeneration blower is hermetically sealed an ASME code stamped vessel watt density and heater sheath thermocouple included code code code stamped stamped stamped vessel vessel vessel code stamped vessel for safety shutdown • Electric•• regeneration heater, flanged immersion type, low type, • Electric Electric Electric regeneration regeneration regeneration heater, heater, heater, flanged flanged flanged immersion immersion immersion type, type, low low low • and heater watt density sheath thermocouple included • watt Air-cooled fin tube after cooler with motor watt watt density density density and and and heater heater heater sheath sheath sheath thermocouple thermocouple thermocouple included included included watt density and heater sheath thermocouple included for safety for shutdown for safety safety safety shutdown shutdown shutdown • for High efficiency separator and condensate sump for safety shutdown • Air-cooled fin tube after cooler withcooler motor •• • Air-cooled Air-cooled Air-cooled fin fin fin tube tube tube after after after cooler with with motor motor motor ••Pressure relief valve, 200cooler mwpwith • High efficiency separator and condensate sump •• High High efficiency efficiency efficiency separator separator separator and and and condensate condensate condensate sump sump sump •• High heater sheath chamber and outlet temperature •High • Pressure relief valve, 200 mwp control and alarms are provided. ••• Pressure Pressure relief relief relief valve, valve, valve, 200 200 200 mwp mwp mwp •Pressure Pressure relief valve, 200 mwp • High heater sheath chamber and outlet temperature after cooler outlet temperature alarm is provided ••• High High heater heater heater sheath sheath sheath chamber chamber chamber and and and outlet outlet outlet temperature temperature temperature •High High heater sheath chamber and outlet temperature control and alarms are provided. control control control and and and alarms alarms alarms are are are provided. provided. provided. • NEMA 4 electrical control panel contains the PLC which control and alarms are provided. • High after cooler outlet temperature alarm is and provided automatically controls the heating cooling cycle upon ••• High High High after after after cooler cooler cooler outlet outlet outlet temperature temperature temperature alarm alarm alarm isisis is provided provided provided • High after cooler outlet temperature alarm provided operator initiation • NEMA 4••electrical control panel contains the PLC which • NEMA NEMA 444 electrical electrical control control control panel panel panel contains contains contains the the the PLC PLC PLC which which which •NEMA NEMA 4electrical electrical control panel contains the PLC which automatically controls the heating and cooling cycle upon • automatically NEMA 7 contains the regeneration heater and motor automatically automatically controls controls controls the the the heating heating heating and and and cooling cooling cooling cycle cycle cycle upon upon upon automatically controls the heating and cooling cycle upon operator initiation contactor/starters operator operator operator initiation initiation initiation operator initiation • NEMA 7••contains regeneration heater motor Electrical rating isthe Class 1, Div 2and Group D and • NEMA NEMA 77the 7 contains contains the the regeneration regeneration regeneration heater heater heater and and motor motor motor •NEMA NEMA 7contains contains the regeneration heater and motor contactor/starters contactor/starters contactor/starters contactor/starters contactor/starters • Electrical rating is Class 1,isis Div 2 Group D222 ••• Electrical Electrical Electrical rating rating rating is Class Class Class 1, 1, Div Div Div Group Group DD DD • Electrical rating is Class 1,1, Div 2 Group Group

Dryer Design Features: Dryer Dryer Design Features: Dryer Dryer Design Design Features: Features: Features: DryerDesign Design Features:

Flow Diagram: low Diagram: Flow Flow Flow Diagram: Diagram: FlowDiagram: Diagram:

7

Dimensions Regeneration Package FLA Inches Connections Weight @ 460/3/60 Inches lbs. L W Package H Dimensions Regeneration Dimensions Dimensions Dimensions Regeneration Regeneration Regeneration Package Package Package FLA NGR10 Dimensions 25.0 2” FLG 84 47 2,150 Regeneration Package 64 FLA FLA FLA Inches PSB ModelPSB Connections Weight Weight FLA Inches Inches Inches PSB PSB Model Model Model Connections Connections Connections Weight Weight @ 460/3/60 PSB Model Weight 44.3 48 lbs. 2,400 81 2” FLG @ @@ 460/3/60 460/3/60 460/3/60 NGR21U Inches Connections L W 114 H Inches @ 460/3/60 Inches Inches Inches lbs. lbs. lbs. L L L W W W H H H Inches lbs. L64 W 2,150 H NGR10 See NGR10 NGR bulletin for more details. Information subject to updates. 25.0 2” FLG 84 47 NGR10 NGR10 25.0 25.0 25.0 2” 2”2” FLG FLG FLG 84 84 84 47 47 47 64 2,150 2,150 2,150 64 64 44.3 53 2,400 114 81 2”114 FLG NGR21U 44.3 81 48 2” FLG 2” NGR21U NGR21U 44.3 44.3 44.3 48 48 2,400 2,400 2,400 2,400 114 114 81 81 81 2”2” FLG FLG FLG 48114 NGR21U NGR21U See NGR bulletin for more details. Information subject toto updates. See NGRsbin bulletin forbulletin more details. Information subject to updates. www.p dustries.com/n gv / Information See See See NGR NGR NGR bulletin bulletin for for for more more more details. details. details. Information Information subject subject subject toto updates. updates. updates. PSB Model

7

sb industries.com/n gv / 7www.p 77 www.p www.p www.p sb sbin sbin in dustries.com/n dustries.com/n dustries.com/n gv gv gv /// 7 www.ps bin dust ries. com/n gv/

FIELD FIELD FIELDSERVICES SERVICES SERVICES

PSB PSB PSB Services Services Services specializes specializes specializes inin field infield field service, service, service, start-ups, start-ups, start-ups, regeneration, regeneration, regeneration, service service service and and and maintenance maintenance maintenance ofof of natural natural natural gas gas gas vehicle vehicle vehicle dryers dryers dryers across across across North North North America. America. America. Our Our Our knowledgeable knowledgeable knowledgeable technicians technicians technicians are are are dedicated dedicated dedicated toto to providing providing providing fast fast fast and and and reliable reliable reliable dryer dryer dryer maintenance maintenance maintenance toto to keep keep keep your your your equipment equipment equipment running running running atat at peak peak peak efficiency. efficiency. efficiency.

• •Dryer • Dryer Dryer Start-up Start-up Start-up / /Commissioning /Commissioning Commissioning • •Natural • Natural Natural Gas Gas Gas Regeneration Regeneration Regeneration • •Aftermarket • Aftermarket Aftermarket Replacement Replacement Replacement Parts Parts Parts

• •Planned • Planned Planned Service Service Service / /Preventative /Preventative Preventative Maintenance Maintenance Maintenance Agreements Agreements Agreements • •Operator • Operator Operator Training Training Training

Public Public Public 23 2323

CNGCNG CNG

transit transit transit

Natural Natural Natural GASGAS GAS SUPPLY SUPPLY SUPPLY

PSBPSB PSB DRYER DRYER DRYER

compressor(s) compressor(s) compressor(s)

storage storage storage

Dispenser Dispenser Dispenser filling filling filling

tube tube tube trailer trailer trailer

generator generator generator SetsSets Sets

PSB PSB PSB Industries Industries Industries Inc. Inc. Inc. 1202 1202 1202 West West West 12th 12th 12th Street Street Street • •Erie, •Erie, Erie, PA. PA. PA. USA USA USA Phone: Phone: Phone: 814-453-3651 814-453-3651 814-453-3651 • •Fax: •Fax: Fax: 814-454-3492 814-454-3492 814-454-3492 ww www. ww. ww. psps ps bindustries bbindustries.com industries.com .com 8 88

www.p www.p www.p sbssbin in bin dustries.com/f dustries.com/f dustries.com/f ieldser ieldser ieldser v ivcvieiccee

Bulletin NNG G NNGG Bul Bul Bul l etl let iet niMarch inO n cOOtcc2 tt2016 014 22014 014

Suggest Documents