Ceiling installation with OWAconstruct

Ceiling installation with OWAconstruct® OWAconstruct® In the following OWAconstruct® pages you will find many different system variations and access...
Author: Abraham Willis
4 downloads 0 Views 2MB Size
Ceiling installation with OWAconstruct®

OWAconstruct®

In the following OWAconstruct® pages you will find many different system variations and accessories which can be used in combination with OWAcoustic® ceiling tiles. The different systems can decisively influence the appearance of the ceiling field and are consequently an important design factor. There are several different ceiling system types to select from, for example, exposed or semi concealed tiles. These can be combined with various different suspension types as well as with lighting fixtures, air conditioning units etc. You will find many ideas of how to achieve your design and functional objectives in these pages or you can simply call us to discuss your requirements.

Experience in ceilings – we never imitate With more than 60 years of ceiling tile manufacturing experience, we are confident in the quality and security of the technical standards delivered with all our products. This is, of course, also valid for our metal suspension and accessories systems. There are over 7,000 components in the OWAconstruct® programme with coloured sections, gallery perimeter sections, wide span bearers, light fittings, cooling units, etc, so we can provide a cost effective solution for almost every installation requirement.

Be on the safe side with OWAconstruct® With the decision to use our suspension and assembly systems you are assured of having the highest security and reliability on your side. The relevant fire test certificates are available to confirm the suitability and technical testing performance of our products when used in conjunction with OWAcoustic® mineral wool tiles.

www.owa.de

C 1.0

OWAconstruct®

Wall junctions (Examples)

Fig. 1

Fig. 2

No. 50 G No. 51/25 No. 51/20 No. 53 No. 50 G-KB

Fig. 3

No. 56/20 No. 56/23 No. 56/21 No. 56/35 No. 56/22

No. 50/14 No. 50/15 G Contura Systems S 3a and System S 15a

Curved wall trims 1. Material The standard curved perimeter wall sections are produced from pre-coated steel. They can be supplied in aluminium on request.

No. 50 G

No. 50/15 G

No. 56

No. 56/20

2. Measurements The curved wall sections are co-ordinated to suit standard trim. 3. Paint finish The wall sections are supplied white painted on the exposed surfaces. As with all OWAconstruct® components other colours are available on request. 4. Fire protection Curved wall sections in steel can be used with OWA ceilings that provide fire protection requirements to DIN 4102 and EN 13501-2.

No. 57

5. Special wall trims Special curved wall sections such as F-angles or profiles are available on request. All we need is a sketch giving the measurements.

Shadow perimeters with Gallerie sections

No. 1690

No. 1691

These perimeter trims owe their name to a particular benefit: the fundamental application of hanging items such as pictures or other exhibits. Gallerie profiles function as standard wall sections but with higher creative ability. They can form a practical and decorative solution to the junction between wall and ceiling surfaces.

No. 1692

No. 1693

Coloured sections Creating an interesting interaction with suspension components and ceiling tiles -‘Tone-on-Tone’ - expressed in colour. Exposed metal suspension sections can be supplied in all colours. For further sections see OWA Price list.

C 1.0

www.owa.de

OWAconstruct®

System S 7 OWAplan®, spray plastered jointless

Technical Data Product line: ® OWAcoustic premium Dimensions: 800 x 1200 mm 1200 x 2400 mm

1 4 6

2

9 7

Thickness: 20 mm nom.

5

11

3

10

Building Material Class: A2-s1,d0 to EN 13501-1 Edge detail: 3p OWA

Metal suspension: All metal components listed are zinc galvanized steel. For further details see Installation Guide OWAplan and OWA Price list. Suspension depth: Minimum suspension depth 115 – 140 mm (from underside of soffit). Direct fixing approx. 90 mm.

1 Metal hanger 2 C-Channel first layer 3 Length coupling 4 Intersection connector 5 C-Channel second layer 6 Perimeter trim 7 Screw

8 Direct hanger 9 Screw 10 Glas fibre textile + textured acoustic plaster 11 Glue

1

Section:

4

Fire protection: Below concrete ceiling: F 120 (DIN 4102) REI 120 (EN 13501-2)

4

2

5

7

10

11

11

1

Cross section:

4

2

10

5

7

11

Direct fixing: 4

2

8

5 11

7

10

www.owa.de

C 2.0

System S 3, S 15

OWAconstruct®

Exposed, demountable

Technical Data Fig. S 3

1

Product line: ® OWAcoustic premium ® OWAcoustic smart ® OWAdeco Dimensions: 600 x 600 mm 625 x 625 mm

2 3

3

Widths: 300, 312.5, 400 mm Lengths: 1200, 1250, 2000*, 2500* mm *Only conditionally demountable

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall trim

Other sizes available on request. Subject to minimum quantities and surcharges. Thickness: 12 mm nom. (OWAdeco), 14 mm nom. (smart), 15 and 20 mm nom. (premium)

2 Section:

Building Material class: A2-s1,d0 to EN 13501-1 (premium, smart) B-s1,d0 to EN 13501-1 (OWAdeco)

3 3

Edge detail:

Cross section:

2

C 2.0

38

S 15 Main T-Section/ Cross T-Section

32

38

Section dimensions: S 3 Main T-Section Cross T-Section

24

24

4

600 x 1200 mm 625 x 1250 mm

Metal suspension: All sections are zinc galvanised and white painted. Cross T-sections are available with either bayonet or hook on connection. For further details and colours see OWA Price list. Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of tile removal 120 mm Fire protection: On request

15

www.owa.de

OWAconstruct®

System S 3 cliq, S 3a cliq Exposed, demountable

Technical Data Fig. S 3 cliq

Product line: ® OWAcoustic premium

1

Dimensions: 600 x 600 mm 610 x 610 mm 625 x 625 mm 600 x 1200 mm 610 x 1220 mm 625 x 1250 mm

2

Thickness: 15 mm and 20 mm nom. (premium)

S 3 cliq

4

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall trim

Building Material class: A2-s1,d0 to EN 13501-1 Edge details:

3

3

Subject to minimum quantities and surcharges see OWA Price list.

S 3a cliq

2

3

Cross section Fig. S 3 cliq: 2

Section dimensions: Main T-Section Cross T-Section long cliq-24-MR cliq-24-CT

24

Cross T-Section short cliq-24-CT

25

Fire protection: On request

3

32

Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of removal 120 mm

Section Fig. S 3 cliq:

38

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list.

24

24

www.owa.de

C 2.1

OWAconstruct®

The system fulfils the requirements according to ASTM E 580-09, “Heavy Duty” according to ASTM C 635 and all requirements according to EN 13964.

System S 3 cliq Seismic resistant Exposed, demountable

Technical Data Product line: ® OWAcoustic premium

1

Dimensions: 600 x 600 mm 610 x 610 mm 625 x 625 mm

2

3

3

4

600 x 1200 mm 610 x 1220 mm 625 x 1250 mm Subject to minimum quantities and surcharges see OWA Price list. Thickness: 15 mm and 20 mm nom. (premium)

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall trim

Building Material class: A2-s1,d0 to EN 13501-1 Class A to ASTM E 1264 Edge detail:

1

2

Section:

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list.

3

Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of removal 120 mm

1 3

Cross section: Fire protection: On request 3

2

24

C 2.1

Cross T-Section short cliq-24-CT

24

25

32

38

Section dimensions: Main T-Section Cross T-Section long cliq-24-MR cliq-24-CT

24

www.owa.de

OWAconstruct®

System S 3a, S 15a Exposed, demountable

Technical Data Fig. S 3a

Product line: ® OWAcoustic premium ® OWAcoustic smart

1

Dimensions: 600 x 600 mm 625 x 625 mm 600 x 1200 mm 625 x 1250 mm 2

Widths: 300, 312.5, 400 mm Lengths: 1200, 1250 2000*, 2500* mm

3

3

4

*Only conditionally demountable

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Shadow Wall trim 5 Contura- filler block

Other sizes are available on request. Subject to minimum quantities and surcharges. Thickness: 14 mm nom. (smart), 15 mm and 20 mm nom. (premium)

2

Edge details:

S 3a



S 3a smart

Section:

S 15a

5

3 3 Cross section:

5

2

Fire protection: On request 24

S 15a Main T-Section/ Cross T-Section

32

Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of removal 120 mm

Section dimensions: S 3a Main T-Section Cross T-Section

38

Metal suspension: All sections are zinc galvanised and white painted. Cross T-sections available in bayonet or hook on. For further details and colours see OWA Price list.

38

Building Material class: A2-s1,d0 to EN 13501-1 (premium, smart)

24

15

www.owa.de

C 3.0

OWAconstruct®

System S 15b OWAline® Exposed, demountable

Technical Data 1

Product line: ® OWAcoustic premium Dimensions: 600 x 600 mm 625 x 625 mm Thickness: 15 mm and 20 mm nom.

2 3

Building Material class: A2-s1,d0 to EN 13501-1 3

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall trim

Edge detail:

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list. Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of tile removal 120 mm

Section: 3

Fire protection: No existing test 2 Cross section: 2

3

Section dimensions:

C 3.0

www.owa.de

System S 3 bws

OWAconstruct®

ball impact resistant, 1

exposed grid

Technical Data Product line: ® OWAcoustic premium Pattern Constellation Dessin Cosmos/N

1 5

2 4

Dimensions: 600 x 600 mm 625 x 625 mm 6

2

Thickness: approx. 15 mm

4

7

1 Nonius hanger and Nonius hanger extensiona with 2 safety pins 5 5 2 Main teel 3 Cross tee 4 Suspension rod with eye 5 Wall spring clip 6 Perimeter trim 7 Perforated metal tile 8 OWAcoustic® premium tile 6 6

1 1

Edge detail:

Metal suspension: All tees are galvanised with exposed surfaces painted white. Only s-system suitable. For further details of sections, colours etc., please see OWA price list. 2 2

24



Suspensioin depth: For ease of panel removal  230 mm recommended

4 4

7 7

Section:

8 8

4

3 3

2

Fire resistance: on request

9

8

38

3

32

Building class: A2-s1,d0 to EN 13501-1

3

8

4

3

24

Cross section:

2

7

24

4 2

2

9

3

8

Section dimensions: Main T-section 8

4

3

2

7

2424 4 4

9

2

2 2

3 3

9 9

4 4

Cross T-section

38 38

3

32 32

9

2424 8

3 3

8 8

3 3 2 2 7 7

www.owa.de

C 4.0

System S 3e

OWAconstruct®

Exposed, demountable With corrosion protection

Technical Data

5

1

Product line: ® OWAcoustic premium Mavroc® ® OWAcoustic premium AquaCosmos® Dimensions: 600 x 600 mm 625 x 625 mm Intermediate sizes available on request. Subject to minimum quantities and surcharges.

2 3

Thickness: 15 mm nom. Building Material class: A2-s1,d0 to EN 13501-1

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall trim 5 Hold down clip

Edge detail:

2

Metal suspension: All sections are zinc galvanised and white painted. Cross T-sections available in bayonet or hook on. For further details and colours see OWA Price list.

5

Section:

3 3 Cross section:

2 5

Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of tile removal 120 mm Fire protection: On request

2

Section dimensions: Cross T-Section

24

C 4.0

32

38

Main T-Section

24

Polyester Epoxy primer Zinc galv. Steel core

www.owa.de

System S 9a

OWAconstruct®

Concealed, demountable

Technical Data

5

Product line: ® OWAcoustic premium Dimensions: 600 x 600 mm 625 x 625 mm

1 4

Widths: 300, 400 mm Lengths: 1200, 1250 mm

8 7

Intermediate sizes available on request. Subject to minimum quantities and surcharges.

2

3

6

Thickness: 20 mm nom.

1 Hanger 2 Main runner 3 Connector 4 Wire clips 5 Stepped Z-Section

Building Material class: A2-s1,d0 to EN 13501-1

6 Coupling 7 L-Section 8 Wall angle 9 Direct fix clamp 10 Timber batten

Edge details: Long edge Suspension Fig. Short edge

Section:

4 2

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list. Minimum suspension depth: Suspension approx. 165 mm (depending on the soffit). Direct fixing approx. 65 mm + timber batten Fire protection: On request Light fitting: No standard light fittings (in accordance with OWA brochure 630).

5

7 4 Cross section: 5

10 Direct fixing: 9

Tile removal: By tilting through the lateral position the tiles can be removed and replaced.

www.owa.de

C 5.0

System S 9b

OWAconstruct®

Concealed, demountable

Technical Data Product line: ® OWAcoustic premium

1

Dimensions: 600 x 600 mm n 625 x 625 mm n n 2 rows of tiles directly demountable (see installation examples)

5 4

Other sizes available on request. Subject to minimum quantities and surcharges. Thickness: approx. 20 mm

3

2 1 Hanger 2 Main T-Section 3 L-Section

Building Material class: A2-s1,d0 to EN 13501-1

4 Cross tee 5 Wall angle

Edge details: Long edge

Suspension system: Section: 4

2

1

 1500

3

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list.

Hints: Direct tile removal is between the main runners No. 45 (to accommodate the splice junction of the main tees it will be necessary to notch out the back of the tile edge). The tiles next to the cross tees No. 46 are not demountable. To prevent any undue stress (especially torsion) on the ceiling system, hangers must be installed vertically. 2

Short edge

4

these two tile rows are demountable

Cross section:

* every 2nd tile directly demountable

4

Suspension depth: approx. 110 mm Fire protection: On request Light fitting: No standard light fittings (in accordance with OWA brochure 630).

3

Tile removal: By tilting through the lateral position the tiles can be removed and replaced.

C 5.0

www.owa.de

System S 1

OWAconstruct®

Concealed

Technical Data Product line: ® OWAcoustic premium

1 9

Dimensions: 600 x 600 mm 625 x 625 mm Widths: 300, 312.5, 400 mm Lengths: 1200, 1250, 2000, 2500 mm

5

7 4

Other sizes are available on request. Subject to minimum quantities and surcharges.

1 Hanger 2 Main runner 3 Connector 4 Wire clips 5 Z-Section

Building Material class: A2-s1,d0 to EN 13501-1 Edge detail:

Metal suspension: All sections are zinc galvanised and white painted. Cross T-sections available in bayonet or hook on. For further details and colours see OWA Price list. Minimum suspension depth: Suspension 115 – 140 mm (depending on the soffit). Direct fixing approx. 28 mm + timber batten

2

6

Thickness: 15 mm and 20 mm nom.

Section:

7

7

3

6 Coupling 7 T-Section 8 Wall angle 9 Wall spring 10 Direct fix clamp 11 Timber batten

1

2

8

4 5

1 5 2

4

Cross section:

Fire protection: On request

5 11 Direct fixing:

7 10 In the direct fix situation a timber batten must be secured to the soffit to provide a secure fixing for the direct fix clamp No. 62/7 or alternatively No. 62 clamp which holds the section No. 34 in position. The clamps are secured to the timber batten with No. 91 – 5/25 mm wood screws.

www.owa.de

C 6.0

System S 19

OWAconstruct®

Concealed with shadow gap, demountable

Technical Data Product line: ® OWAcoustic premium

1 6

Dimensions: 600 x 600 mm 625 x 625 mm Thickness: approx. 20 mm

2

3

4

5

Building Material class: A2-s1,d0 to EN 13501-1 1 Hanger 2 Main T-Section 3 Cross T-Section 4 Cross T-Section 5 Shadow wall trim 6 Hold down clip

Section:

2

Edge details:

4c 10c

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list.

Minimum suspension depth: 75 – 100 mm (depending on the soffit).  6 mm

3, 4

Cross section:

3, 4

 6 mm 2

Section dimensions: Cross T-section:

24

C 6.0

32

38

Main T-section:

24

www.owa.de

System S 2a, S 2b

OWAconstruct®

Semi-concealed, demountable

Technical Data

Fig. S 2a

Product line: ® OWAcoustic premium

1

5

Dimensions: S 2a Widths: 312.5 mm Lengths: 1250 mm S 2b

Widths: 317.5 mm Lengths: 1250 mm 7

2

Other sizes are available on request. Subject to minimum quantities and surcharges.

4 3

Thickness: S 2a 20 mm nom. S 2b 15 mm nom.

1 Hanger 2 Main T-Section 3 Stabilizer bar 4 L-Section

Building Material class: A2-s1,d0 to EN 13501-1

5 Wall spring 6 Contura filler block 7 Shadow wall angle

Edge details S 2a: Long edge

Short edge

Edge detail S 2b:

6

12

System S 2a: Section: 2

Cross section: 3

1

1

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list. Minimum suspension depth: 75 – 100 mm (depending on the soffit). For ease of tile removal 120 mm

3

4

4

1

2

6

System S 2b: Section: 2

Cross section: 3

1

3

4

Fire protection: On request

4

1

2

Section dimensions:

www.owa.de

C 7.0

System S 2p

OWAconstruct®

Semi-concealed, demountable

Technical Data 2

Product line: ® OWAcoustic premium

5 1

Dimensions: Widths: 300 mm, 312,5 mm 400 mm Lengths: 1200 mm, 1250 mm, 2000 mm* * Only conditionally demountable

3 4

1 Hanger 2 Angle brace Nonius hanger extension safety pin (double) compulsory 3 Main tee 4 Tile reinforcement profiles, depending on span width, every 5th profile has to be fixed by a perimeter bracket 5 Wall trim

Other sizes are available on request. Subject to minimum quantities and surcharges see OWA Price list. Thickness: approx. 15 mm Building Material class: A2-s1,d0 to EN 13501-1 Edge details: Long edge

Section:

1

4

Short edge

3

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list.

3

Cross section: 4

4

3

Minimum suspension depth: 150 mm for ease of tile removal. When suspension depth m 500 mm angle brace No. 17/80 is required. When suspension depth > 500 mm reinforcement with CD sections is required.

Section dimensions:

38

No. 45

24

C 7.0

www.owa.de

OWAconstruct®

System S 14a Rilled, concealed

Technical Data Product line: ® OWAcoustic premium

1 9

Dimensions: Widths: 300 mm Lengths: 1200, 1250 mm Thickness: 15 mm nom.

5

Building Material class: A2-s1,d0 to EN 13501-1 Edge details:

5a

7 4

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list.

1 Hanger 2 Main runner 3 Connector 4 Wire clips 5 Z-Section

Minimum suspension depth: Suspension 115 - 140 mm (depending on the soffit). Direct fixing approx 28 mm + timber batten Fire protection: On request

2

6

5a

Section:

7

7

3

6 Coupling 7 T-Section 8 Wall angle 9 Wall spring 10 Direct fix clamp 11 Timber batten

1

2

8

4 5

1 5 2

4

Cross section:

5 11 Direct fixing:

7 10 In the direct fix situation a timber batten must be secured to the soffit to provide a secure fixing for the direct fix clamp No. 62/7 or alternatively No. 62 clamp which holds the section No. 20 in position. The clamps are secured to the timber batten with No. 91 – 5/25 mm wood screws.

www.owa.de

C 8.0

System S 14b

OWAconstruct®

Rilled, semi-concealed

Technical Data Product line: ® OWAcoustic premium

1

5

Dimensions: Widths: 300 mm Lengths: 1200, 1250 mm Thickness: 15 mm nom.

6

2 4 3 1 Hanger 2 Main T-Section 3 Stabilizer

2

4 L-Section or Z 5 Wall spring 6 Shadow Wall angle

Section: 4

3

4

1

Edge details: Long edges

Short edges

Metal suspension: All sections are zinc galvanised and white painted. For further details see OWA Price list.

1

3

Building Material class: A2-s1,d0 to EN 13501-1

Minimum suspension depth: 75 - 100 mm (depending on the soffit). For ease of tile removal 120 mm Fire protection: On request

Cross section:

2

Section dimensions:

C 8.0

www.owa.de

System S 6

OWAconstruct®

Clear spanning

Technical Data Product line: ® OWAcoustic premium

Fig. S 6c

Dimensions: Widths: 300, 312,5, 400 mm Lengths: 1200, 1250, 2000*, 2500* mm *only conditionally demountable

Other sizes are available on request. Subject to minimum quantities and surcharges. 1 Thickness: 15 mm and 20 mm nom.

4

Building Material class: A2-s1,d0 to EN 13501-1 Edge details: S 6a

Long edges Short edges

1

S 6b Cross section:

6 3

3

Edge details: S 6c Long edges Short edges

1 Wall section 2 Z-Section 3 C-Section (2 No.) 4 T-Section

System S 6a – concealed non demountable

demountable

2

3

3 3

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list. Minimum suspension depth: with S 6a: 180 – 200 mm with S 6b, S 6c, S 6d: 100 – 120 mm Fire protection: System S 6a: On request System S 6b, S 6c and S 6d there is no test certification.

System S 6b – Contura, exposed demountable 4

System S 6c – exposed demountable

4

www.owa.de

C 9.0

OWAconstruct®

System S 6 radial Clear spanning

Technical Data Cross sections: System S 6a – concealed non demountable

Product line: ® OWAcoustic premium demountable

1

2

Dimensions: Outer widths: up to 400 mm Lengths from 2000 from 2500* mm on request *only conditionally demountable

Other sizes available on request. System S 6b – Contura, exposed demountable

3

Thickness: 15 mm and 20 mm nom. Building Material class: A2-s1,d0 to EN 13501-1 Edge details:

S 6a

S 6b

Long edges 1 Z-Section 2 C-Section (2 No.) 3 T-Section

Short edges

Measurements for trapezoid-shaped tiles:

A: tile width constant outer module width with S 6a and S 6b = 400 mm B: Corridor width * R1: Outside radius reference side * C: resultant tile width Measurements for curved wall sections:

R1: Radius inside curve Wall section* R2: Radius outside curve Wall section* Other measurements:

X: Y: M:

Width wall section Supported on at least 2/3 of the width of the wall section flange Centre point

*Measurements absolutely necessary for projects.

C 9.0

www.owa.de

OWAconstruct®

System S 12 Baffle system

Technical Data 1

Product line: ® OWAcoustic premium

2

Dimensions: Heights: 150, 200, 250, 300 400, 600 mm Lengths: 1160 mm for module 1200 mm 1210 mm for module 1250 mm Other lengths available on request.

3

Thickness: approx. 24 mm

4

Building Material class: A2-s1,d0 to EN 13501-1

1 Nonius hanger 2 Main runner 3 Connector 4 Baffle with wite metal trim

Edge detail:

Metall suspension: All sections are zinc galvanized and white painted. For further details see OWA Price list.

Section:

Suspension depth: Minimum suspension depth 50 m from underside of soffit to top edge of baffles. Cross section:

Assembly:

OWAcoustic® baffles are framed on 3 sides with a white metal U-channel section. The integral hanging tabs are located into the respective slots in the No. 70/10 main tee section and are then bent over to secure the baffle in place.

www.owa.de

C 10.0

System S 12d

OWAconstruct®

Baffle system

Technical Data 3

1

Product line: ® OWAcoustic premium Dimensions: Heights: 150, 300 mm Lengths: 1200, 1250, 1500 mm Other sizes on request.

2

Thickness: 24 mm nom.

7

Building Material class: A2-s1,d0 to EN 13501-1

5

Edge detail: 1 C-Section 2 Hexagonal bolt 3 Square washer 4 Knurled nut 5 Connection sleeve 6 End cap for C-section 7 Baffle with white metal frame

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list. Minimum suspension depth: Suspension depth 70-75 mm from underside of soffit to top edge of baffles.

Section:

2 5

7

1 4

3

Cross section:

6

4

3

1

5

2

7

Baffle hanging : The OWAcoustic-Baffles are framed with a white metal U-section and are secured to the C-carrier section by hexagonal bolts in a metal sleeve at spacings of 100 or 200 mm

C 10.0

www.owa.de

OWAconstruct®

System S 18 Parallel Bandraster (modular pan grid) and Cross Bandraster (modular pan grid), demountable

Technical Data Product line: ® OWAcoustic premium

Fig. S 18p 2

Dimensions: 1200 x 1200 mm 1250 x 1250 mm

9

1

Widths: 300, 312.5, 400 mm Lengths: 1200, 1250, 1500, 2000*, 2500* mm *Only conditionally demountable

8

4

Other sizes are available on request. Subject to minimum quantities and surcharges. Thickness: 15 mm and 20 mm nom.

3 6 Fig. S 18k 9

Building Material class: A2-s1,d0 to EN 13501-1 Edge details: System S 18p: Long edges: Short edges: 1

12

3 6

System S 18k: large format 3 tile edge Long edges: 1

8

4 3

5

7

or

6

Short edges: 3

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWAconstruct® Price list.

1 Nonius hanger 2 Angle brace 3 Bandraster section 4 Connector 5 Bandraster cross section 6 C- or Z-Section tile support inserts according to span distance 7 Reinforcing spline 8 Wall angle section 9 Wall anchor

Minimum suspension depth: 100 mm (from underside of soffit). For ease of tile removal 130 mm Fire protection: On request

www.owa.de

C 11.0

System S 18d

OWAconstruct®

Bandura, demountable

Technical Data Product line: ® OWAcoustic premium

6 1

Dimensions: 600 x 1200 mm 625 x 1250 mm Widths: 300, 312.5, 400 mm Lengths: 1200, 1250, 2000*, 2500* mm

3

5

Other sizes are available on request. Subject to minimum quantities and surcharges.

2 4 1 Nonius hanger 2 Bandraster section 3 Connector 4 Cross T-Section 5 Wall section 6 Wall anchor 7 Contura filler block

Section:

Edge 3

Thickness: 15 mm and 20 mm nom. Building Material class: A2-s1,d0 to EN 13501-1 Edge details:

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list.

Edge 6 4

2 Cross section:

Edge 3 4

2 7

Minimum suspension depth: 100 mm (from underside of soffit). For ease of tile removal 130 mm

4

Fire protection: On request

Edge 6 2

*Only conditionally demountable

7

C 11.0

www.owa.de

System S 8

OWAconstruct®

Honeycomb, Square and Rectangular

Technical Data

7

Product line: ® OWAcoustic premium Dimensions:

5

300 x 300 mm 312.5 x 312.5 mm 600 x 600 mm 625 x 625 mm 1200 x 1200 mm 1250 x 1250 mm 300 x 600 312.5 x 625 300 x 1200 312.5 x 1250 600 x 1200 625 x 1250

1

3

6

mm mm mm mm mm mm

2

3

1 Hanger 2 Main T-Section 3 Cross T-Section 4 Wall section 5 Module clamp 6 Honeycomb tile 7 Cover tile

Cell heights: 150, 200, 300 mm Other heights on request Other sizes are available on request. Subject to minimum quantities and surcharges. Thickness: Honeycomb tile 24 mm nom. Cover tile 15 mm nom.

4

3

7 Section and cross section:

6

Building Material class: A2-s1,d0 to EN 13501-1

2, 3

Edge details: Section dimensions:

Main T-Section

Cross T-Section

7w

Metal suspension: All sections are zinc galvanised and white painted. For further details and colours see OWA Price list.

32

Short edges

8

38

Long edges

24

24

Minimum suspension depth: Depends on soffit and Honeycomb height

www.owa.de

C 12.0

Suggest Documents