®
A R C H I T E CTURA L
A REA
LI GHTI NG
The
sophistication ultimate in style and
technological
LED Illumination ENERGY EFFICIENCY
LONGEVITY
SUSTAINABILITY
The light sources employed in the Parkway Square family of fixtures are the most efficient sources commercially available today, including energy efficient LED, induction, metal halide and compact fluorescent. The result is more light with less energy consumption.
AAL manufactures its products to have a life span as long as the buildings and spaces they illuminate. The primary material used for all our products is aluminum to resist corrosion and the need for maintenance. Aluminum will not need the periodic refinishing required of steel products that will eventually rust and corrode. All our internal parts and fasteners are made of aluminum or stainless steel. Lamp enclosures are kept dust free and dry to prevent light degradation and maintain a high level of energy efficiency.
AAL develops our products with recycling and resource management in mind. We recycle all incoming packaging materials. Our state-of-the-art finishing system uses eco-friendly cleansing and preparation chemicals that are harmless enough to send to the drain without further processing. Finally, AAL makes the Parkway Square, like all AAL products, with renewable materials such as aluminum and stainless steel.
PATENTS PENDING MADE IN TM
2
USA
Wall sconce
Accent (small) Scale
Contents Table of
LED Solutions.......................................2 Decorative Vertical LED...............6 Technology & Performance.......8 Elevated Scale.................................10 Pedestrian Scale LED............12 Accent Scale LED.................14 Arm & Pole Options......................16 Sconce LED.......................................18 Bollard LED. .......................................20 bollard
S M
CodeLink
Pedestrian (Medium) Scale
Instantly retrieve AAL product spec sheets by scanning these codes with any compatible Smartphone and QR reader. See pages 12, 14, 18 and 20 .
Pa r k way S q u a r e
3
LED Solutions Pedestrian Scale
Accent Scale
For mounting heights up to 15'
For mounting heights up to 10'
Horizontal LED Higher Performance • 71.7w MicroEmitter™ (60 LEDs) • 3281 Lumens • 46 lpw • 3500k or 5100k • types ii, iii, iv, and v
• Exclusive upgradeable LED technology • Replaceable MicroEmitter modules • LifeShield diode protection standard • Available with Angled
Vertical LED Decorative • • • • •
53w led (42 leds) 2300 lumens 43 lpw 5100k types iiI and v
• Bright, beautiful decorative illumination • Available with all five decorative screens • Available with all three hood styles • Lightly diffused acrylic lens standard
Hood only
AAL CodeLink
SM
Horizontal LED Higher Performance • • • • •
39w led (36 leds) 1961 lumens 50 lpw 3500k or 5100k types I, iiI and v
• Direct illumination of the ground plane • Canted LEDs offer three distribution options • Available with Angled Hood only
Vertical LED Decorative • • • • •
20.6w led (18 leds) 933 lumens 45 lpw 5100k types iiI and v
• High aesthetic option for lower mounting heights • Available with all five decorative screens • Available with all three hood styles • Lightly diffused acrylic lens standard SM
AAL CodeLink AAL CodeLink
SM
PKWS LED spec sheet PKWM LED Spec Sheet
4
PKWS LED Spec Sheet
Wall Sconce
Bollards
Entrance Illumination
Path and Driveway Illumination
Decorative Sconce LED
Horizontal LED Higher Performance
• 19.5w, 21.6W, 28W, 36.4W led (15, 18, 24, 30 leds) • 580 -1392 lumens • 29 - 51 lpw • 3500k or 5100k • types ii, iii, iv, and v
• • • • •
• Includes an integral secondary source to provide illumination to path of egress • Available with all five decorative screens • Lightly diffused acrylic lens standard • Mounting heights from 8 to 16 feet
• Direct illumination of the ground plane • Canted LEDs offer three distribution options • Available with Angled Hood only
SM
AAL CodeLink AAL CodeLink
SM
PKWS LED spec sheet PKW Sconce LED Spec Sheet
39w led (36 leds) 1961 lumens 50 lpw 3500k or 5100k types ii, iii, iv, and v
Vertical LED Decorative • • • • •
14w led (12 leds) 556 lumens 40 lpw 5100k types iii and v
• High aesthetic option for lower mounting heights • Available with all five decorative screens • Available with Angled Hood only
AAL CodeLink
SM
PKWB LED Spec Sheet
Pa r k way S q u a r e
5
PKWS-LED-PR4
6
PKWM-LED-PR4
Excellence refined
The appointed styling of Parkway Square is more on parallel with
a fine piece of art than an outdoor luminaire.
Pa r k way S q u a r e
7
Decorative Vertical LED Configurations
The unique design of Parkway Square allows you to mix-and-match between optical systems, hood styles, and decorative screen options to truly customize your luminaire. angled hood - ANG *
1
Select
d e s i r e d h oo d
Step
Parkway Square features three designer hoods, each with a distinct
straight hood - STR / Indirect - ind ** (underside of Indirect hood in high reflectance white)
design statement, available in painted aluminum to match the fixture, or natural copper and stainless steel. double hood - dbl** * Not available with PKSA/PKSP * * Not available with PKSA/PKSP and PKWB
Choose the optical system that best suits your project needs. PKWM-Vertical LED (VL3/VL5)
stainless steel hood - sts
Step
copper hood - COP
2
Specify hoods in either painted aluminum, natural copper, or stainless steel to complement other design elements on the project.
Select
optical s y s t e m
PKWS-Vertical LED (GLA) PKWB-Vertical LED (GLA) PKSA/PKSP-Vertical LED
PKSA/PKSP Vertical LED
PKWM-Vertical LED (VL3/VL5)
8
PKWS-Vertical LED (GLA) PKWB-Vertical LED (GLA)
To customize the look of the luminaire, add a decorative screen in either a contemporary style such as Wheat or Infinity, or a more traditional style with Offset, Trio or Shutter. Submit your own design or logo to truly customize the luminaire. Each screen is created with a water laser to ensure smooth lines and consistency with each luminaire.
Decorative Screens
Step
3
TRIO DSTR
Select
d ecorative screen option
WHEAT DSWH
INFINITY DSIN
OFFSET DSOF
SHUTTER DSSH
CUSTOM DSCS
Specify screens in either painted aluminum, natural copper, or stainless steel. stainless steel Screen - sSP
copper Screen - CPR
Pa r k way S q u a r e
9
LED Technology & Performance Pedestrian Scale Medium Housings Horizontal LED BUG Rating
Vertical LED BUG Rating
B2 U0 G2
HORIZONTAL LED
B1 U2 G1
B1 U0 G0
B1 U2 G1
180°
102 lm. 3.1%
0 lm. 0%
UP LIGHT
UH
33 lm. 3.5%
UH
100°
100°
100°
100°
UL
BACK LIGHT
Vertical LED BUG Rating
VERTICAL LED
UP LIGHT 0 lm. 0%
Horizontal LED BUG Rating HORIZONTAL LED
180°
VERTICAL LED
Accent Scale Small Housings
FORWARD LIGHT
UL
FORWARD LIGHT 993 lm. 50.7% 450 lm. 48.3%
1622 lm. 49.4% 1099 lm. 47.7%
1660 lm. 50.6% 1099 lm. 47.7%
BACK LIGHT 967 lm. 49.4% 450 lm. 48.3%
BVH 90°= 0.3% BVH 90°= 4.3%
FVH 90°= 0.2% FVH 90°= 4.3%
BVH 90°= 0.3% BVH 90°= 1.3%
FVH 90°= 0.3% FVH 90°= 1.3%
BH 80°= 22.2% BH 80°= 21.4%
FH 80°= 22.0% FH 80°= 21.4%
BH 80°= 4.8% BH 80°= 15.8%
FH 80°= 5.5% FH 80°= 15.8%
BM 60°= 18.8% BM 60°= 19.1%
FM 60°= 20.3% FM 60°= 19.1%
BM 60°= 28.5% BM 60°= 25.5%
FM 60°= 29.0% FM 60°= 25.5%
BL 30°= 8.1% BL 30°= 2.9%
FL 30°= 8.1% FL 30°= 2.9%
BL 30°= 15.8% BL 30°= 5.7%
FL 30°= 15.9% FL 30°= 5.7%
0°
0°
Horizontal LED Photometry
Vertical LED Photometry
Horizontal LED Photometry
Vertical LED Photometry
Legend:
PKWM T5
Legend:
60LED-BW
PKWM T5
Legend:
55LED-BW
PKWS T5 2.00
36LED-BW
PKWS T5
18LED-BW
2.00 1.00 1.00
0.20
0.10 2.00 0.00
0.20
1.00 0.50
0.50
0.00
0.20
2.00 0.00
0.10
0.50
1.00 0.00
1.00
0.10
0.10
Mounting Height: 12 feet Total flux: 3281 lm Watts: 71.7 W LPW: 46
10
0.20
0.50
Mounting Height: 12 feet Total flux: 2300 lm Watts: 53 W LPW: 43
Mounting Height: 8 feet Total flux: 1961 lm Watts: 39 W LPW: 50
Mounting Height: 8 feet Total flux: 933 lm Watts: 20.6 W LPW: 45
Photometry
Wall Sconce PKSA LED BUG Rating
PKSP LED BUG Rating
B0 U3 G1
PKSA LED
Bollards Horizontal LED BUG Rating
B0 U4 G1
B1 U0 G0
463 lm. 41%
B0 U2 G1
HORIZONTAL LED
180°
PKSP LED
Vertical LED BUG Rating 180°
VERTICAL LED
UP LIGHT
829 lm. 60%
0 lm. 0%
UP LIGHT
51 lm. 9.2%
UH
UH
100°
100°
UL
BACK LIGHT
UL UL
FORWARD LIGHT
331 lm. 29% 271 lm. 19%
FORWARD LIGHT 331 lm. 29% 292 lm. 21%
BACK LIGHT 967 lm. 49.4% 253 lm. 45.5%
BVH 90°= 1.2% BVH 90°= 0.7%
FVH 90°= 1.2% FVH 90°= 1%
BVH 90°= 0.3% BVH 90°= 9.2%
FVH 90°= 0.3% FVH 90°= 9.2%
BH 80°= 5% BH 80°= 2.7%
FH 80°= 5% FH 80°= 3.3%
BH 80°= 4.8% BH 80°= 17.8%
FH 80°= 5.5% FH 80°= 17.8%
BM 60°= 14.3% BM 60°= 9%
FM 60°= 14.3% FM 60°= 9.6%
BM 60°= 28.5% BM 60°= 14.9%
FM 60°= 29.0% FM 60°= 14.9%
BL 30°= 8.3% BL 30°= 7%
FL 30°=8.3% FL 30°= 7%
BL 30°= 15.8% BL 30°= 3.6%
FL 30°= 15.9% FL 30°= 3.6%
993 lm. 50.7% 253 lm. 45.5%
0°
0°
PKSA LED Photometry
PKSP LED Photometry
Horizontal LED Photometry
Vertical LED Photometry E
Legend: PKSA UBDS
24LED-BW
PKSP USDB
PKWB T5
30LED-BW
A=2.00 B=1.00 C=0.50 D=0.20 E=0.10
E
0.10 0.1
0.01
0.05
0.5 0.2
2.00 0.00 1.0
0.05 0.02
0.2
0.20
0.50
2.00
E
36LED-BW
A=2.00 B=1.00 C=0.50 D=0.20 E=0.10
E
PKWB T5
E
E
0.5 1.0
2.0
2.0 0.00
0.00
1.00
E
12LED-BW
E
0.2 0.5 1.0
0.00
E
0.1
0.01
0.1
Mounting Height: 8 feet Total flux: 1125 lm Watts: 28 W LPW: 40.18
Mounting Height: 8 feet Total flux: 1392 lm Watts: 36.4 W LPW: 38.24
Mounting Height: 3.5 feet Total flux: 1961 lm Watts: 39 W LPW: 50
E
Mounting Height: 3.5 feet Total flux: 556 lm Watts: 14 W LPW: 40 EE
Pa r k way S q u a r e
11
Elevated Scale 18' 20’ PKWM (2)
16'
PKSP
20’
14'
PKWM
12'
20’
10'
PKWS PKSA
8'
20’
6'
4' 20’
2'
0'
Luminaire Hood optics
PKSP-UBDS/ PKSA-DB (Large/Small Sconce) PKWM (Pedestrian) PKWS (Accent) PKWM(2) (Pedestrian) P — 30LED-BW/15LED-BW
Options DSTR
ANG L2A L2P VL3 55LED-BW —
STR ANG D L2R L2P GLA 18LED-BW T3 60LED-BW —
— D
Arm
— PSA-BU
Pole
— PR4-4R12/BC5-4 PS3-3S8 PS4-4S16/ACBCs P
12
— PSA-BU(2)
18'
PKWM
16'
PKWM (2)
14'
12'
PKWS
PKWS
10'
NEED 8'
6'
PKWB
4'
2'
0'
PKWS (Accent) PKWM(2) (Pedestrian) PKWB (Bollard) PKWM/PKWS (Pedestrian/Small)
DBL GLA 18LED-BW
DSIN
STR VL5 55LED-BW
— DBL/ANG GLA 12LED-BW
VL3 55LED-BW/GLA 18LED-BW
— DSOF DSWH
— PSA-TU(2)
Cs PS3-3S10 PS4-4S12/ACBCS
— PSWM-BD/PSWM-TD —
—
Pa r k way S q u a r e
| 1313 |
Pedestrian Scale LED
Medium Housing
HOOD
ANG – Angled Hood
STR – Straight Hood
CodeLink S M
Scan code to download PKWM Spec Sheet
DBL – Double Hood
ORDERING example – Pedestrian (Medium) scale 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS PKWM
14
ANG
T3
60LED-WW
DSOF
–
7. COLOR
8. MOUNTING
MAL
PSA-TU
Ordering information ordering information 1. LUMINAIRE PKWM Parkway Square Medium W: 23"-29.75" H: 30.5" WT: 49-79 lbs EPA: 3.18-3.28
2. HOOD (Please see page 12 for hoods) ANG – Angled Hood STR – Straight Hood DBL – Double Hood
4. BALLAST/Driver
COP STS
DSOF Offset
Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens. 60 LED only. 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others or used in conjunction with the TEN pole option by AAL.
Brushed copper hood Stainless steel hood
Vertical LED System Lightly diffused acrylic cylinder VL3 Asymmetric distribution VL5 Symmetric distribution
Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.
DSIN Infinity
6. OPTIONS General
hood
Horizontal LED System Available with ANG only T2 IES Type 2 distribution T3 IES Type 3 distribution T4 IES Type 4 distribution T5 IES Type 5 distribution
5. decorative SCREENS (optional)
55LED-BW 42 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. Lightly diffused lens. VL3 & VL5 only. 60LED-WW MicroEmitter™ 60 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 60LED-BW MicroEmitter™ 60 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.
ULS LDL TEN TA23
3. OPTICS
DSTR Trio
DSSH Shutter
DSCS Custom*
7. COLOR All 13 standard and 4 premium AAL colors available. For RAL, please submit a 4-digit RAL number or color chip for custom colors.
decorative screens SSP CPR
DSWH Wheat
8. MOUNTING
Screen in brushed stainless steel Screen in brushed copper
Please see page 17 for arm mounting options.
SPECIFICATIONS HOUSING
Parkway Square housings shall be cast aluminum a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The driver shall be mounted internally and accessed by loosening four captive bolts and lifting away the lamp compartment. The lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The fixture shall slip over a 4"/100mm square post top and secured with four stainless steel set screws. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system shall be sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel latches shall release the door to allow access to the optical system. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution. The horizontal optical system shall meet ansi ies standards for full cutoff reflector systems when using arm in the bu or bd configuration.
Electrical
The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >2960 for 5100k led. The vertical led configuration shall have a self contained light engine consisting of a diode array mounted to a die-cast aluminum heat sink and sealed behind an injection molded and optically clear lens.
microemitterTM REFLECTOR
Precision injection molded, high specular reflectors shall be positioned to achieve directional control toward desired task. Secondary reflectors shall have a concave, specular medium hammertone finish that shall be used to redirect light downward. No fasteners shall be placed on the reflective surface. The entire assembly shall fasten to the housing as a one-piece module and shall feature wiring quick-connects for easy installation. MicroEmitters™ shall be field replaceable and shall be driven at 350ma current.
Installation & mounting
The pkwm shall be factory supplied as a complete, prewired assembly. The fixture shall slip over a 4"/100mm open top square pole or 2 3/8" tenon and secured and leveled with 4 stainless steel set screws or arm mounted to the side 4"/100mm round or square pole.
FINISH
Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
Certification
The fixture is listed with ETL or outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.
Warranty
Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.
Pa r k way S q u a r e
| 1515|
Accent Scale LED
Small Housing
HOOD
ANG – Angled Hood
STR – Straight Hood
CodeLink S M
Scan code to download PKWS Spec Sheet
DBL – Double Hood
ORDERING example – accent (small) scale 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS 7. COLOR PKWS
16
DBL
GLA
18LED-WW
DSOF
–
MAL
8. MOUNTING PSA-TU
Ordering information ordering information 2. HOOD (Please see page 14 for hoods)
1. LUMINAIRE PKWS Parkway Square Small W: 14"-21" H: 21.75"-23" WT: 34-46 lbs EPA: 1.46-1.68
ANG – Angled Hood STR – Straight Hood DBL – Double Hood
9LED-BW 18LED-WW 18LED-BW 36LED-WW 36LED-BW
Horizontal LED System Available with ANG only T1 IES Type 1 distribution T3 IES Type 3 distribution T5 IES Type 5 distribution
9 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 9 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 18 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 18 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 36 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 36 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.
hood COP STS
DSIN Infinity
DSOF Offset
Frosted Glass Diffuser
DSWH Wheat
DSTR Trio
DSSH Shutter
DSCS Custom*
7. COLOR All 13 standard and 4 premium AAL colors available. For
Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others or used in conjunction with the TEN pole option by AAL.
Brushed copper hood Stainless steel hood
GLA
Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.
6. OPTIONS General ULS LDL TEN TA23
Vertical Optical System
5. decorative SCREENS (optional)
4. BALLAST/Driver 9LED-WW
3. OPTICS
RAL, please submit a 4-digit RAL number or color chip for custom colors.
8. MOUNTING
Please see page 17 for arm mounting options.
decorative screens SSP CPR
Screen in brushed stainless steel Screen in brushed copper
SPECIFICATIONS HOUSING
Parkway square housings shall be cast aluminum a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The driver shall be mounted internally and accessed by loosening four captive bolts and lifting away the lamp compartment. The lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The gla element shall be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The fixture shall slip over a 3"/76mm square post top and secured with four stainless steel set screws. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system shall be sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel latches shall release the door to allow access to the optical compartment. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution. The horizontal optical system shall meet ansi ies standards for full cutoff reflector systems when using arm in the bu or bd configuration.
Electrical
The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k led.
Installation & mounting
The pkws shall be factory supplied as a complete, prewired assembly. The fixture shall slip over a 3"/76mm open top square pole and secured and leveled with 4 stainless steel set screws or arm mounted to the side 4"/100mm round or square pole.
FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
Certification The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.
Warranty
Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.
Pa r k way S q u a r e
| 1717|
Designer Mounting Options
Unique Arm Design The unique design of Parkway Square’s arms provide a multitude of configurations allowing the same arm and luminaire to be used throughout the site, providing a consistent and complimentary look and feel.
The versatile design of the
Parkway Square family allows for a multitude of mounting options, including post top, arm and wall mount.
Parkway Square mounts to a 4" square pole for pedestrian scale, or a 3" square pole for accent scale. AAL offers a wide variety of decorative poles to complement the elegant design of Parkway Square and carry the styling throughout the entire project.
18
ARM MOUNTING Pole MOUNT
wall MOUNT
Arm mounts to side of a 4" O.D. pole.
PSA-TU
PSA-TD
Fixture above with arm mounted up.
Fixture above with arm mounted down.
PSA-BU
PSA-BD
Fixture below with arm mounted up. Not available with IND.
Fixture below with arm mounted down. Not available with IND.
Mounting plate provided. Hardware by others.
PSWM-TU
PSWM-TD
Fixture above with arm mounted up.
Fixture above with arm mounted down.
Parkway Square is a designer’s dream, offering endless configurations and true customization without the custom price. Available as a post or wall mount, Parkway Square can be mounted above or below its decorative arms, and the arms themselves can be rotated to have the arm in the up or down position. Parkway Square arms feature unitized, onepiece designs for structural rigidity and easy installation.
AAL offers a wide variety of poles to install Parkway Square as a post top luminaire. The pedestrian scale mounts to a 4" O.D. open top square pole or to a 2 3/8" tenon. Visit www.aal.net for a complete listing of poles.
AAL CodeLink PSWM-BU
PSWM-BD
Fixture below with arm mounted up. Not available with IND.
Fixture below with arm mounted down. Not available with IND.
SM
AAL Arms Spec Sheet
Pa r k way S q u a r e
19
Sconce LED
CodeLink S M
Scan code to download PKSA/PKSP Spec Sheet
ORDERING example – Sconce 1. LUMINAIRE PKSA DBUS
20
2. BALLAST/DRIVER
3. DECORATIVE SCREEN
4. OPTIONS
5 COLOR
15LED-WW
DSTR
NEG
BLK
Ordering information ordering information 1. LUMINAIRE Accent Scale (Small Sconce)
Pedestrian Scale (Medium Sconce)
PKSA DB PKSA DS PKSA UB PKSA US PKSA DBUS PKSA UBDS PKSA USDS
PKSP DB PKSP DS PKSP UB PKSP US PKSP DBUS PKSP UBDS PKSP USDS
Down beam & egress Down spread & egress Up beam & egress Up spread & egress Down beam/up spread & egress Up beam/down spread & egress Up spread/down spread & egress
2. BALLAST/Driver 15LED-WW 15 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSA DB/DS/UB/US only. 15LED-BW 15 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSA DB/DS/UB/US only. 18LED-WW 18 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSP DB/DS/UB/US only. 18LED-BW 18 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSP DB/DS/UB/US only. 24LED-WW 24 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSA DBUS/UBDS/USDS only. 24LED-BW 24 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSA DBUS/UBDS/USDS only. 30LED-WW 30 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSP DBUS/UBDS/USDS only. 30LED-BW 30 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSP DBUS/UBDS/USDS only.
Down beam & egress Down spread & egress Up beam & egress Up spread & egress Down beam/up spread & egress Up beam/down spread & egress Up spread/down spread & egress
3. decorative SCREENS (optional) Painted to match fixture. Also available in stainless steel or copper. *Contact factory for custom designs.
DSIN Infinity
DSOF Offset
DSWH Wheat
4. OPTIONS General BBU NEG SSP CPR
DSTR Trio
DSSH Shutter
DSCS Custom*
Integral battery backup. 24PLL for PKSA only. No egress lamp. Opening is sealed with a cap and painted to match fixture. Screen in brushed stainless steel Screen in copper material
5. COLOR All 13 standard and 4 premium AAL colors available. For RAL, please submit a 4-digit RAL number or color chip for custom colors.
SPECIFICATIONS HOUSING
WALL PLATE
Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The vertical lens shall be opal, semi translucent high impact injection molded lighting grade acrylic and shall not be field replaceable. The vertical struts shall be cast aluminum and painted to match the fixture. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The optical lens frame shall be secured with four captive socket cap screws and shall be sealed with a one piece memory retentive, molded silicone gasket. The lamp compartment shall have a molded silicone plug to completely seal the optical system from insects or dirt emanating from the electrical box or conduit. Four stainless steel screws shall release the canopy to allow electrical access. All internal and external hardware shall be stainless steel and zinc.
Wall plate shall be secured into wall over j-Box and shall be wired to the power circuit. Fixture shall be attached to the wall plate by four set-screws.
Electrical The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k leD. The mr16 lamp for emergency egress feature shall be included and powered by 120 volt input transformed into low-voltage (12 volt) by the electronic transformer (included). The mr16 lamp shall use a miniature bi-pin base.
FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
Certification The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.
Warranty Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.
SAFETY The fixture shall include an integral secondary source to provide path of egress illumination from building to the public way. The hidden mr16 lamp, powered as a remote head is able to be angle up to 15° in either direction.
Pa r k way S q u a r e
| 2121|
Bollard LED
CodeLink S M
Scan code to download PKWB Spec Sheet
ORDERING example – Bollard 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER PKWB
22
ANG
GLA
12LED-WW
5. DECORATIVE SCREEN
6. OPTIONS
7. COLOR
DSOF
–
MAL
Ordering information ordering information 2. OPTICS
1. LUMINAIRE PKWB Parkway Square Bollard W: 14" H: 42" WT: 42 lbs EPA: 2.84
Horizontal LED System
Vertical Optical System
T1 T3 T5
GLA
IES Type 1 distribution IES Type 3 distribution IES Type 5 distribution
3. BALLAST/Driver 6LED-WW 6LED-BW 12LED-WW 12LED-BW 36LED-WW 36LED-BW
Frosted Glass Diffuser
4. decorative SCREENS (optional)
6 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 6 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 12 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 12 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 36 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 36 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.
Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.
DSIN Infinity
DSOF Offset
DSWH Wheat
DSTR Trio
DSSH Shutter
DSCS Custom*
6. COLOR All 13 standard and 4 premium AAL colors available. For
5. OPTIONS General ULS LDL
hood COP STS
RAL, please submit a 4-digit RAL number or color chip for custom colors.
Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens
Brushed copper hood Stainless steel hood
decorative screens SSP CPR
Screen in brushed stainless steel Screen in brushed copper
SPECIFICATIONS HOUSING
Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The shaft shall be 5" wide and 22" tall, extruded 6061-t6 aluminum yielding a fixture height of 42 inches. The driver shall be mounted internally and accessed by loosening four set screws and lifting the fixture head off of the shaft and loosening an additional four bolts on the underside of the fixture head. One stainless steel screw shall release the top cap to allow access to the lamp compartment and shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The gla element shall be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The fixture features tamper resistant hardware. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system is sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel screws shall release the door to allow access to the optical compartment. The optical assembly shall be removed by loosening four screws and lifting it out. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution.
Electrical
The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k led.
FINISH
Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
Certification
The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.
Warranty
Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.
Pa r k way S q u a r e
| 2323|
®
ARCHI T E CT URAL
ARE A
L I GHT I NG
Parkway Square brochure with additional lighting options
Parkway Square™ is a registered trademark of Architectural Area Lighting and Hubbell Lighting, Inc. ©2012 Architectural Area Lighting | PWS 0312 16555 East Gale Ave. | City of Industry | CA 91745 T 626.968.5666 | F 626.369.2695 | www.aal.net | www.aal.net/aal/pws.html | Printed on recycled paper