Datenblatt

Product Specification Hot Melt-/Wet Extrusion

Extruder (Hybrid) Extruder (Hybrid)

ZE 5 - 35 mm Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

ANWENDUNG - APPLICATION ▼ Multifunktionsextrusion von Kleinstmengen bis Produktionsmassstab für Forschung und Entwicklung sowie Produktionsanwendungen. Extrusionsresultate sind optimal für eine Hoch- oder Runterskalierung geeignet. Diese Extruder erfüllen komplexe Extrusionsaufgaben unter schwierigen Bedingungen wie hoher Druck, hohes Drehmoment oder steile Temperaturgradienten. Multifunction extrusion of smallest quantities up to production scale in laboratory, test and production applications. Results can be easily scaled up to or scaled down from a commercial size extruder according to customers wishes and actual extruder. This Extruder is used for complex extrusion tasks under difficult conditions such as very high pressure, high torque and step temperature profile

Doppelwellen Mini Extruder ZE 12 Double Screw Mini Extruder ZE 12

EIGENSCHAFTEN - DESIGN ▼ Die parallelen Doppelschnecken Extruder sind mit einfach austauschbaren Extrusionswerkzeugen ausgestattet. Die Extrusionswerkzeuge können durch verschiedene Schneckensegmente wie Förder-, Rückförder-, Knet- oder Mischsegmenten individuell aufgebaut und an die Extrusionsaufgabe angepasst werden. Dank der kleinen und kompakten Bauweise können diese Mini-Extruder an wechselnden Standorten schnell aufgebaut und eingesetzt werden. Die Temperaturprofile der Heizzonen und das Drehmomentprofil des Motors werden aufgezeichnet und können per USB oder Ethernet ausgelesen werden. The parallel Twin-Screw Extruders are fitted with easily replaceable barrels and screws that can be configured according to your needs. Various screw segments can be combined to convey, reverse convey, knead and mix the extrudate. The compact and lightweight tabletop design allows using the extruder in different locations or in glove boxes. The temperature of each heating-zone can be controlled separately and is recorded with the torque of the motor by the control system. Records can be transferred to USB or via Ethernet.

STEUERUNG - CONTROLLER ▼ Die parallelen Doppelschnecken Extruder werden von Siemens Hard- und Software gesteuert und per Siemens HMI Comfort Panel bedient. Übergeordnete Steuerungen für Multiextrusion oder Extrusions-nwendungen in einem Prozess mit mehreren Komponenten sind erhältlich. Verschiedene Kommunikationsprotokolle ermöglichen die Einbindung der Extruder in bestehende Anlagen. Einfachere Modelle ohne Siemens HMI und einfacher PID Regelung der Heizzonen sind erhältlich. The Extruder is controlled by Siemens hard- and software. The operating of the machine happens via Siemens HMI Comfort Panel. Central control systems for multiple extrusion or multi-component operations are available. A variety of protocols is available for connection to the plants host system.

Doppelwellen Mini Extruder Hybrid ZE-H 5 / 9 mm Double Screw Mini Extruder Hybrid ZE-H 5 / 9 mm

HYBRID - HYBRID ▼ Der Hybride Mini-Extruder ist im selben Gehäuse wie unsere bewährten Standard Extruder als Table-Top Variante gebaut. Als Kombigerät bietet er jedoch zusätzlich die Wahl zwischen zwei unterschiedlichen Extrudergrössen. Drei Variationen mit jeweils zwei wählbaren Schneckendurchmessern (5, 9 oder 12 mm) sind erhältlich. The new Mini-Extruder Hybrid is built in the same housing as the popular standard extruders in a table top execution. As a twin barrel extruder it offers the choice of two different sizes of screw diameters which can be run on the same device. Three combinations of two different screw diameters out of 5, 9 and 12 mm screws are possible.

► Flexibilität - Flexibility ► Vielseitig einsetzbar - Multifunctional ► Platzsparend - Space saving ► Produktsparend - Product saving ► Kostenoptimiert - Cost optimized ► Effizient - Efficient

Simpler models without Siemens HMI and basic PID controller for the heating zones are available.

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]

Datenblatt

Product Specification

Extruder (Hybrid) Extruder (Hybrid)

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

ATEX / IP - ATEX / IP ▼

SCHNECKEN - SCREWS ▼

ATEX Kat.: 3D/3D (innen/aussen) - Geräte für Zonen 2 und 22 sind erhältlich (bis 230 °C) Schutzart (IP): IP 54 (Standard) / höher - siehe Optionen



ATEX Cat.: 3D/3D (inside/outside) - Equipment suitable for zone 2 and 22 up to 230 °C (available) Protection (IP): IP 54 (standard) / higher - see options



Rapid and easy mounting / dismounting to the screw shaft.



Hohe mechanische Stabilität des Schneckenschafts.

VORTEILE - ADVANTAGES ▼ ►

Split-Barrel aufklappbar oder aus einem Stück, keine Leckage.



Split-Barrel or one piece barrels feasible, no leakage.



Steiler Temperaturgradient zwischen Heizzonen dank tiefer Einfräsungen.



Steep temperature gradients due to deep inci-sions between

Kompakte und modulare Schnecken in allen Grössen.



Compact and modular screws in all sizes.



Schnelle und einfache Montage / Demontage der Module auf den Schneckenschaft.



High mechanical stability of the screw shaft.



Verschiedene Schneckenelemente für Beförderung, Kneten, Verdichten, Pressen, Entspannen und Mischen.

Several screw segments for transport, mixing, kneading and reverse conveying.



Rückwärtsfördernde Schneckenelemente zur Druckerhöhung.



Counter transport elements to increase the pressure.



Modulare Extrusionswerkzeuge können 1:1 aus einem Stück gefertigt werden.

segments.



Modular screws can be 1:1 produced from one piece, easier cleaning



Montage der Barrel mit nur einem Spannring.



Kleinster Doppelschneckenextruder für Proben ab 0,5 g.



Barrel mounting by only one triclamp.



Schnelle Aufheizung und einfache Kühlkanäle durch kompaktes Design.



Smallest twin screw extrusion equipment in the world for samples starting from 0,5 g.



Rapid heating and no complex fluid channels due to low mass.



Heizen und Kühlen einzelner Zonen möglich.



Heating and cooling of individual segments (optional).



Verschiedene Flüssigdosierstellen.



Several dosing locations (solid & liquid).



Kombination von Barrels mit Spannringen möglich.

Produktberührende Teile:



Combinations of barrels via Triclamp connections feasible



Grosse Variation von Düsen und deren schnelle Montage und Demontage mit vier Schrauben.

Large variability of dies mounted and dismounted rapidly by four screws.

► Datenaufzeichnung: Temperaturverlauf jeder Heizzone, Drehmoment, Drehmomentverlauf, Umdrehungen der Extrusionswerkzeugen. Auslesung über USB und Ethernet möglich.

Material - Marterial ▼

Monitoring (standard): Temperature of each heating zone, torque, torque trend, rpm, USB or Ethernet Data read out.

► Dank kompakter Bauweise muss die Düse nicht beheizt werden.

No need to heat the nozzles due to compact size.



Düsenbeheizung möglich



Nozzle heating feasible



Schnelle Lieferung von Ersatzteilen dank interner Produktion



Near-term supply of spear parts due to in-house production

GARANTIE - WARRANTY ▼ Three-Tec garantiert verfügbare Ersatzteile während 10 Jahren und vergibt eine einjährige Garantie für Defekte am Gerät, die nicht durch den Bediener hervorgerufen wurden. Three-Tec guarantees the availability of spare parts during ten years and

Edelstahl, Pharma grade 1.4404 (AISI 316L) oder höher, poliert

Parts in contact with material: Stainless steel, Pharma grade 1.4404 (AISI 316L) or superior, polished

Nichtberührende Teile: Stahl oder Aluminium lackiert (Motor, Getriebe) Non contact parts: Steel and aluminum (motor, transmission)

Dichtungen:

PTFE, Silicon (hitzeresistent bis 230°C, optional bis 400°C)

Gaskets / Seals:

PTFE, Silicon (heat resistant up to 230°C optionally up to 400°C)

Technische Daten - Technical Data ▼ Spannung - Voltage:

230 – 400 V

Strom - Current:

15 A

Drehmoment - Torque:

5 – 180 Nm (ZE 5 – ZE 35)

Geschwindigkeit - Screw speed: 1 – 300 U/min (rpm) höher auf Anfrage - higher on request Druck - Pressure:

200 – 250 bar

Gewicht - Weight:

~ 45 – 85 kg

issues a guarantee for damage on the device, which is not caused by the user, for one year.

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]



Extruder (Hybrid)

Datenblatt

Extruder (Hybrid)

Product Specification

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

SCHNECKEN UND LEISTUNGEN - SCREWS AND RATES ▼ Die passenden Extrusionswerkzeuge werden je nach dem zu extrudierenden Materialien gewählt. Die Extrusionsleistung hängt von den Materialeigenschaften, der Temperatur, der Dosierleistung, des Düsendurchmessers, der Fliesseigenschaften und des Segmentaufbaus des Werkzeuges (Fördersegmente, Rückfördersegmente, Knetsegmente, mixsegmente) ab. The proper extruder screws are determined based on the material being extruded. The actual extrusion rates depend on the material and its characteristics, temperature, feeding rate, nozzle diameter, flow properties and the screw design (conveyer, reverse conveyor, kneading, reverse kneading and mixing elements are available).

Die folgenden Massenströme sind theoretische Werte gemessen mit Stearylalkohol (97%) (sa) / Soluplus® (sp), einer 1 mm Düse und einer Standardschnecke (nur Fördersegmente). The following output rates are theoretical values measured with stearyl alcohol (97%) (sa) / Soluplus® (sp) using a round nozzle with 1 mm diameter and a standard screw (only conveying segments)

Für Massenströme nahe am oberen oder unteren Limit wird empfohlen im Three-Tec Testlabor Versuche durchzuführen. For feeding rates at the upper and lower limits of the theoretical range, check with a Three-Tec Test Lab.

Geschwindigkeit: 1 - 300 U/min (höhere maximale Geschwindigkeiten sind erhältlich) | Schnecken: Doppelkonkav Speed range screw: 1 - 300 rpm (higher maximum speed available) | Screws: Double concave screws

Dichte - density:

Schnecke

Stearyl alcohol (sa) = 0.812 g/cm3

Screw

Steigung Pitch [mm]

Soluplus® (sp) = 0.5 – 0.6 g/cm3 Ø x 0.5

Ø x 1.0

Ø x 1.5 Freies Innenvolumen - Free volume:

Massenstrom - flow [kg/h]

L:D 15:1, Steigung - Pitch: Ø x 1.0 [cm3] ▼

sa ▼

sp ▼

sa ▼

sp ▼

sa ▼

sp ▼

ZE 5

0 – 0.15

0 – 0.1

0 – 0.3

0 – 0.2

0 – 0.45

0 – 0.3

1.2

ZE 9

0 – 0.6

0 – 0.4

0 – 1.1

0 – 0.9

0 – 1.7

0 – 1.4

6

ZE 12

0 – 2.64

0 – 1.9

0 – 5.2

0 – 4.0

0 – 7.9

0 – 6.0

14

ZE 16

0 – 5.3

0 – 4.4

0 – 10.6

0 – 8.1

0 – 15.9

0 – 13.1

28

ZE 18

0 - 7.1

0 - 5.9

0 - 13.2

0 - 11.1

0 - 21.9

0 - 19.5

65

ZE 25

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

ZE 32

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

L:D = Verhältnis von Schneckenlänge und Schneckendurchmesser - Screw length and screw diameter at a ration of x:x

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]

Extruder (Hybrid)

Datenblatt

Extruder (Hybrid)

Product Specification

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

GEWICHT, DÜSEN, MAX. DRUCK, DREHMOMENT - WEIGHT, NOZZLE, MAX. PRESSURE, TORQUE ▼ ZE 5

ZE 9

ZE 12

ZE 16

ZE 18

ZE 25

ZE 32

45

49

51

58

80 - 150

120 - 250

n.a.

0.1 - 3

0.1 - 5

0.1 - 8

0.1 - 12

0.1 - 14

0.1 - 20

0.1 - 27

200

200

250

250

250

250

250

5

20

25

52

80

120

n.a.

ZE 25

ZE 32

Gewicht Weight [kg]

Düsen Ø Nozzle Ø [mm]

Max. Druck Max. Pressure

[bar] Drehmoment Torque [Nm]

Achtung: Diese Angaben sind variabel je nach zusätzlichem Equipment. Caution: These measurements depend on additional equipment

Verschiedene Düsenformen auf Anfrage (Sieb, Schlauch, Schlitz…). Andere Längen auf Anfrage. More shapes of dies are available on request (sieve, tube, groove, special shapes etc.).

Weitere Druckmesspunkte auf Anfrage.

More pressure measuring zones feasible upon request.

L:D UND AUFHEIZZEIT - L:D AND HEATING TIME ▼ ZE 5

ZE 9

ZE 12

ZE 16

ZE 18

Anzahl heizzonen - Number of heating zones L:D - 15:1

2-3

3–4

3–5

L:D - 20:1

2-4

3–5

L:D - 25:1

3-5

3–5

L:D - 30:1

50

Leistung Power [W]

3-5

5-8

5-8

n.a.

3–5

4-5

5–8

5–8

n.a.

3–5

4–5

5–8

5–8

n.a.

3–5

3–5

4-5

5-8

5–8

n.a.

100

100

100

200

200

n.a.

Aufheizzeit - Heating time [min]

100 °C

3

3

4

5

6

9

n.a.

200 °C

8

9

11

13

20

27

n.a.

L:D = Verhältnis von Schneckenlänge und Durchmesser Jede Heizzone besteht aus zwei Heizkartuschen und einem PT100 Temperatursensor. Zusätzliche Heizzonen auf Anfrage. L:D = Screw length and screw diameter at a ration of x:x Each heating zone consists of two heating cartridges and one PT100 for temperature measuring. Ad-ditional heating zones are possible upon request.

Spannung: 24 V, Temp: 320°C, Kabellänge: 0.6 m Voltage: 24 V, Max. temp: 320°C, Cable length: 0.6 m

Aufheizzeiten können minimiert werden durch Wahl stärkerer Heizkartuschen. Heating times can be decreased by increasing the power of the heating cartridges.

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]

Extruder (Hybrid)

Datenblatt

Extruder (Hybrid)

Product Specification

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

PASSENDE DOSIERGERÄTE - MATCHING FEEDERS ▼ ZE 5

ZE 9

ZE 12

ZE 16

ZE 18

ZE 25

ZE 32

ZD 5 FB

x

x

x

x

x

x

x

ZD 9 FB

-

x

x

x

x

x

x

ZD 12 FB

-

-

x

x

x

x

x

ZD 12 B

-

-

x

x

x

x

x

ED 20 B

-

-

x

x

x

x

x

ED 20

-

-

x

x

x

x

x

FB B []

= = =

Flachboden - Flat tray mit Brückenzerstörer - Bridge braker nur Trichter - hopper only

MOTOR - MOTOR ▼ Type: Servomotor | Max. Temperatur: 150°C | Spannungsbereich: ± 10% | Frequenz: 50 – 60 Hz Type: Synchronous servo motor | Maximum temperature: 150°C | Voltage range: ± 10% | frequency: 50 – 60 Hz

Geschwindigkeit [U/min] speed [rpm]

Spannung

Drehmoment

Strom

Max. Moment

Voltage

Torque

Current

Max. torque

[V]

[Nm]

[A]

[Nm] *

Kühlung Cooling

Leistung Power

[W]

ZE 5

6000

230 (200)

0.6

1.4

2 (5 A)

H2O / Luft

0.4

ZE 9

3000

230 (200)

1.4

1.8

3.9 (5 A)

H2O / Luft

0.5

ZE 12

3000

230 (200)

1.4

1.8

3.9 (5 A)

H2O / Luft

0.5

ZE 16

3000

400 (380)

4.7

3.7

13.2 (10 A)

H2O / Luft

1.5

ZE 18

3000

400 (380)

10.5

7.4

28.5 (18 A)

H2O / Luft

3.3

ZE 25

3000

400 (380)

n.a.

n.a.

n.a.

H2O / Luft

n.a.

ZE 32

3000

400 (380)

n.a.

n.a.

n.a.

H2O / Luft

n.a.

* Das maximale Drehmoment ist gemessen beim Maximalstrom vom Konverter (bei x Ampere). * The maximum torque is measured at the maximum current of the inverter (at x Ampere).

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]

Datenblatt

Product Specification

Extruder (Hybrid) Extruder (Hybrid)

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

OPTIONEN - OPTIONS ▼

Zubehör - Accessories ▼



Optischer Temperatur- und Drucksensor an der Düse



Optical miniature pressure and temperature sensor for nozzle.



Kühlanschlüsse für Wasser- oder Luftkühlung



Connections for cooling with water or gas



Wasserkühlung für Beschickung (empfohlen)



Water or air cooling for each barrel zone and water cooling for inlet zone (recommended)



Volumetrische oder Gravimetrische Dosierung für die kontinuierliche Extruderbeschickung



Volumetric or gravimetric dosing for continuous filling of the extruder



Einfülltrichter für das Extrudat



Hopper for filling the extrudate



Zusatzpaket für Temperaturen bis 400 °C



Add-on package for temperatures up to 400°C, cooling of inlet zone necessary



PTFE Dichtungen mit Spülgasanschluss



PTFE seals with flushing



Staubdicht +/- 20 mbar oder gasdicht

► ► ► ► ► ► ► ► ►



Dust-tight +/- 20 mbar or gas tight



Aufzeichnung: Temperaturen der einzelnen Heizzonen und an der Düse, Drehmoment Motor, Druck an der Düse



Monitoring: Temperature of inlet zone, nozzle and its trend. Monitoring: Pressure at nozzle and its trend.



Seitliche Beschickung, Aufwärtsbeschickung



Sideways feeding and feeding from below



Barrels mit beliebig vielen Heiz- oder Kühlzonen



Barrels with customized heating or cooling zones



IP 65 / GMP



IP65 / GMP



Doppel-Barrel in einem Gerät (Hybrid)



Twin barrels in one device (hybrid)



Kombinierter Kontroller für Extruder und Dosiergerät





Düsenplatten mit jeglicher Formgebung nach Kundenwunsch Nozzle plates with assorted sizes and custom design

Granulator Pelletizer

Heissabschlag Hot cutter (directly after the nozzle)

Förderband / Kühlband Conveyor belt, Cooling belt, Drum cooler

Wasserbad Water bath

Tablettenpresse Continuous tablet press

Stopfdosierer Stuffer feeder

Isolator (High Containment) Glove-Box (High Containment)

Spheronizer Spheronizer

Interlock to control a feeder from the extruder’s panel.

Weitere Extruderschnecken auf Anfrage More screw sizes on request

DOKUMENTATION - DOCUMENTATION ▼ Das Qualitätsmanagementsystem ISO 9001:2008 und optional die GMP-Richtlinien garantieren eine reproduzierbare Qualität. The Quality Management System matching the requirements for ISO 9001:2008 and optionally GMP guarantee throughout high quality products.

► ► ► ►

Risikoanalyse - Risk assessment GMP Dokumentation - GMP documentation Bedienungsanleitung - Manual Material- und Oberflächenzertifikate - Material- and surface



certificates

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]

Extruder (Hybrid)

Datenblatt

Extruder (Hybrid)

Product Specification

ZE 5 - 35 mm

Hot Melt-/Wet Extrusion

Schmelz-/Feuchtextrusion

Doppelschnecken / Double Screw

ABMESSUNGEN - DIMENSIONEN ▼

ZE 18 - 35 mm

ZE 5 - 16 mm

L:D

15:1

20:1

25:1

30:1

40:1

Düse

ZE 5

75

100

125

-

-

10

ZE 9

135

180

225

270

360

10

ZE 12

180

240

300

360

480

10

ZE 16

240

320

400

480

640

10

ZE 18

270

360

450

540

720

10

ZE 25

360

480

600

720

960

10

ZE 32

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

Weitere Dimensionen auf Anfrage Other lengths and dimensions feasible upon request.

Achtung: Diese Messungen dienen als generelle Empfehlung. Für genaue Abmessungen siehe Zeichnungen. Caution: These measurements are for general reference only. Please consult dimensional drawing for exact measurements.

Copyright by Three-Tec GmbH. Spezifikationen können ohne vorherige Ankündigung geändert werden. Copyright by Three-Tec GmbH. Specifications subject to change without notice.

www.three-tec.ch

+41 (0)62 892 82 11

[email protected]