DIS 11014

DR Page 1/5 Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 * Reviewed on 09/23/2010 1 Identification of substance · Pro...
6 downloads 0 Views 36KB Size
DR

Page 1/5

Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 *

Reviewed on 09/23/2010

1 Identification of substance · Product details · Trade name: EEZY

KLENE (16 OZ.)

· Article number: C551 · Application of the substance / the preparation Surface cleanser Wetting agent · Manufacturer/Supplier: Printers' Service 26 Blanchard Street Newark, NJ 07105 · Information department: 1-973-589-7800 (MSDS revised 9/23/2010), Prisco email address - [email protected] · Emergency information: CHEMTREC (24 hr) 1-800-424-9300 *

2 Composition/Data on components · Chemical characterization · Description: Mixture of the substances listed below with nonhazardous additions. · Dangerous components: 64742-95-6 Solvent naphtha (petroleum), light arom. Xn; R 65 61790-12-3 tall oil Xi; R 36/38 95-63-6 1,2,4-trimethylbenzene Xn, Xi; R 10-20/21/22-36/38 141-43-5 2-aminoethanol C, Xn; R 20/21/22-34 1330-20-7 xylene Xn, Xi; R 10-20/21-38 98-82-8 cumene Xn, Xi; R 10-20/21/22-36/38 · Additional information: For the wording of the listed risk phrases refer to section 16.

5 - 10% 2.5 - 5% 2.5 - 5%

≤ 2.5% ≤ 2.5% ≤ 2.5%

*

3 Hazards identification · Hazard description: Xi Irritant · Information pertaining to particular dangers for man and environment: The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. R 36/38 Irritating to eyes and skin. R 52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. · Classification system: The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. · NFPA ratings (scale 0 - 4) Health = 1 Fire = 1 Reactivity = 0 Personal Protection = B · HMIS-ratings (scale 0 - 4) Health = 1 Fire = 1 Reactivity = 0 Personal Protection = B

*

4 First aid measures · General information: No special measures required. · After inhalation: Supply fresh air; consult doctor in case of complaints. · After skin contact: Generally the product does not irritate the skin. · After eye contact: Rinse opened eye for several minutes under running water. (Contd. on page 2) USA

DR

Page 2/5

Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 Trade name: EEZY

Reviewed on 09/23/2010

KLENE (16 OZ.) (Contd. of page 1)

· After swallowing: If symptoms persist consult doctor. *

5 Fire fighting measures · Suitable extinguishing agents: Use fire fighting measures that suit the environment. · Protective equipment: No special measures required.

*

6 Accidental release measures · Person-related safety precautions: Not required. · Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water. · Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). · Additional information: No dangerous substances are released.

*

7 Handling and storage · Handling: · Information for safe handling: No special measures required. Store in cool, dry place in tightly closed receptacles. · Information about protection against explosions and fires: No special measures required. · Storage: · Requirements to be met by storerooms and receptacles: No special requirements. · Information about storage in one common storage facility: Not required. · Further information about storage conditions: None.

*

8 Exposure controls and personal protection · Additional information about design of technical systems: No further data; see item 7. · Components with limit values that require monitoring at the workplace: 95-63-6 1,2,4-trimethylbenzene REL 125 mg/m³, 25 ppm TLV 123 mg/m³, 25 ppm 141-43-5 2-aminoethanol PEL 6 mg/m³, 3 ppm REL Short-term value: 15 mg/m³, 6 ppm Long-term value: 8 mg/m³, 3 ppm TLV Short-term value: 15 mg/m³, 6 ppm Long-term value: 7.5 mg/m³, 3 ppm 1330-20-7 xylene PEL 435 mg/m³, 100 ppm REL Short-term value: 655 mg/m³, 150 ppm Long-term value: 435 mg/m³, 100 ppm TLV Short-term value: 651 mg/m³, 150 ppm Long-term value: 434 mg/m³, 100 ppm BEI 98-82-8 cumene PEL 245 mg/m³, 50 ppm Skin REL 245 mg/m³, 50 ppm Skin TLV 246 mg/m³, 50 ppm · Additional information: The lists that were valid during the creation were used as basis. · Personal protective equipment: · General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed. (Contd. on page 3) USA

DR

Page 3/5

Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 Trade name: EEZY

Reviewed on 09/23/2010

KLENE (16 OZ.)

(Contd. of page 2) · Breathing equipment: Not required. · Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable: Fluorocarbon rubber (Viton) · For the permanent contact gloves made of the following materials are suitable: Fluorocarbon rubber (Viton) · For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: Fluorocarbon rubber (Viton) · As protection from splashes gloves made of the following materials are suitable: Fluorocarbon rubber (Viton) · Eye protection: Goggles recommended during refilling. *

9 Physical and chemical properties · General Information Form: Color: Odor:

Fluid Whitish Characteristic

· Change in condition Melting point/Melting range: Boiling point/Boiling range:

N/A 100°C (212°F)

· Flash point:

> 100°C (> 212°F)

· Ignition temperature:

340°C (644°F)

· Auto igniting:

Product is not selfigniting.

· Danger of explosion:

Product does not present an explosion hazard.

· Vapor pressure at 20°C (68°F): 23 hPa (17 mm Hg)

*

· Density at 20°C (68°F):

0.94 g/cm³

· Solubility in / Miscibility with Water:

Partly miscible.

· Additional information: · VOC

Partial Vapor Pressure - 0.20 hPa (0.15 mm Hg.) 82.9 g/l / 0.69 lb/gl

10 Stability and reactivity · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · Materials to be avoided: · Dangerous reactions No dangerous reactions known. · Dangerous products of decomposition: Carbon monoxide and carbon dioxide Nitrogen oxides USA

(Contd. on page 4)

DR

Page 4/5

Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 Trade name: EEZY

Reviewed on 09/23/2010

KLENE (16 OZ.) (Contd. of page 3)

*

11 Toxicological information · Acute toxicity: · LD/LC50 values that are relevant for classification: 64742-95-6 Solvent naphtha (petroleum), light arom. Oral LD50 >6800 mg/kg (rat) Dermal LD50 >3400 mg/kg (rab) Inhalative LC50/4 h >10.2 mg/l (rat) · Primary irritant effect: · on the skin: No irritant effect. · on the eye: No irritating effect. · Sensitization: No sensitizing effects known. · Additional toxicological information: The product is not subject to classification according to internally approved calculation methods for preparations: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us. 12 Ecological information · Additional ecological information: · General notes: Water hazard class 2 (Self-assessment): hazardous for water Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground.

*

13 Disposal considerations · Product: · Recommendation: Smaller quantities can be disposed of with household waste. · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations. · Recommended cleansing agent: Water, if necessary with cleansing agents.

*

14 Transport information · Hazard class: -

*

15 Regulations · Sara · Section 355 (extremely hazardous substances): None of the ingredient is listed. · Section 313 (Specific toxic chemical listings): 103-23-1 bis(2-ethylhexyl) adipate 95-63-6 1,2,4-trimethylbenzene 1330-20-7 xylene 98-82-8 cumene 100-41-4 ethylbenzene · TSCA (Toxic Substances Control Act): All ingredients are listed. · Proposition 65 · Chemicals known to cause cancer: 98-82-8 cumene 100-41-4 ethylbenzene · Chemicals known to cause reproductive toxicity for females: None · Chemicals known to cause reproductive toxicity for males: None · Chemicals known to cause developmental toxicity: None (Contd. on page 5) USA

DR

Page 5/5

Material Safety Data Sheet acc. to ISO/DIS 11014 Printing date 09/23/2010 Trade name: EEZY

Reviewed on 09/23/2010

KLENE (16 OZ.) (Contd. of page 4)

· Cancerogenity categories · EPA (Environmental Protection Agency) 103-23-1 bis(2-ethylhexyl) adipate: C 1330-20-7 xylene: I 98-82-8 cumene: CBD 100-41-4 ethylbenzene: D · IARC (International Agency for Research on Cancer) 103-23-1 bis(2-ethylhexyl) adipate: 3 1330-20-7 xylene: 3 100-41-4 ethylbenzene: 2B · NTP (National Toxicology Program) None of the ingredients is listed. · TLV (Threshold Limit Value established by ACGIH) 1330-20-7 xylene: A4 100-41-4 ethylbenzene: A3 · MAK (German Maximum Workplace Concentration) 100-41-4 ethylbenzene: 3A · NIOSH-Ca (National Institute for Occupational Safety and Health) None of the ingredients is listed. · OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients is listed. · Product related hazard informations: Observe the general safety regulations when handling chemicals. The product is not subject to identification regulations according to directives on hazardous materials. · National regulations: · Water hazard class: Water hazard class 2 (Self-assessment): hazardous for water. *

16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Department issuing MSDS: · Contact: CHEMTREC (24hr) 1-800-424-9300, Printers Service 1-973-589-7800 · * Data compared to the previous version altered. USA