Dimming Drivers For Soraa LED Constant Current Soraa 300mA MR16
Constant Voltage Soraa 12V MR16 and AR111
Truelux Group, Sony Technology Centre, Pencoed, UK
T: +44 1656 856 330 F: +44 1656 837 155
Truelux drivers have been developed to work in perfect harmony with Soraa’s range of unique LED lamps. Suitable for both the MR16 constant voltage and constant current models as well as the higher powered AR111. All dimming options are available including mains phase, analogue (with automatic mode detection of 1-10V or 0-10V) and programmable DALI. Specially developed hardware and software along with fine tuning of the dimming curves has resulted in smooth flicker free dimming for the entire range. Truelux drivers are approved by Soraa and available now.
E:
[email protected]
w: www.trueluxgroup.co.uk
DALI DRIVER 12V -
Addressable driver with smooth dimming Designed for 12V Soraa constant voltage lamp PWM output signal with no flickering and high kHz frequency Open-circuit protection Short-circuit protection with automatic restart Strain relief for both mains and LED engine wiring Push terminal blocks suitable for 0.5-2.5mm2 Designed in accordance with EN62386
Designed in collaboration with Soraa Inc. the Truelux DALI driver offers superior programmable dimming of Soraa 12V lamps.
110
IP20
DIMMABLE
Technical
Ordering data
Model number
DA12VPWM
DA12VPWM10
Model number
DA12VPWM or DA12VPWM10
Dimming control
DALI
Qty per box
Efficiency
82%
Box Dimension
32x28x18cm
Weight per box
6Kg
Max lamps
1 X AR111
Max load
1 X MR16
20W
Output Voltage
10W 12V AC
Rated supply voltage AC
220 - 277V AC
Rated supply voltage DC
180 - 315V DC
Mains frequency
Compliance IEC 55015 IEC 61547 IEC 61000-3-2 IEC 61000-3-3
50 / 60 Hz
PF at 230V / 50 Hz
50PCS
IEC 61347-1 IEC 61347-2-13 IEC 62386 AS/NZS CISPR15
> 0.93
Power consumption - No Load/Standby