Description
Loop IP6510-LN Multiple WAN Router
The IP6510-LN Multiple WAN Edge Router has IPv4/IPv6 dual stack functionality and Level 3 Routing in a single unified device. It is suitable for large deployments that require only moderate bandwidth and a small port density but a very competitive CapEx. The LN stands for Linux, which backs up the Loop-OS architecture inside the IP6510-LN. The new Loop-OS includes many advanced features with more functionality to help you improve your network. These features inside the Loop-OS include IPv4/IPv6 dual stack routing capability, software bridging*, serial-to-IP/UDP terminal services*, and network security features. With RIPng, OSPFv3 and BGP-4, the IP6510-LN is able to build a reliable IPv6 routed network. All WAN ports and LAN ports can be configured into bridge mode*, router mode, or combinations of both. WAN interfaces including Ethernet, E1/T1 and Serial RS232/RS485 provide flexibility for any access network. Using VPN connectivity over IPSec included in the Loop-OS software suite allows a highly secure and reliable connection over an IP-based network to any location.
Features Mechanical and Electrical – 2 Tributary Slots for WAN interfaces – Power Module AC and DC coexist AC power: 100 to 240 Vac, 0.8 A DC power: -36 to -72 Vdc, 1.2 A
Layer 3 – IPv4/IPv6 dual stack – Routing Protocols: Static Route, RIPv1/v2, RIPng, OSPFv2/v3, BGP4. – Multicast protocols: IGMPv1/v2/v3 – VLAN Routing based on Static Route, RIPv1/v2, RIPng, OSPFv2/v3. – Address Translation NAT Port Forwarding Table for NAPT (Virtual Service) – IP-VPN connectivity over IPSec
WAN Interface – Tributary Slots 2 ports Security Cold-swappable – IPSec Plug-in card types: Encryption: DES, 3-DES, AES-128/AES-256 à E1 card: 2 ports per card, Nx64k Authentication: MD5, SHA-1 à T1 card: 2 ports per card, Nx64k Key Management à Ethernet card: 1 port per card, à IKEv1/v2 (pre-shared key or RSA certificate) electrical RJ45 Up to 64 concurrent tunnels per interface à Ethernet card: 1 port per card, – IP-VPN connectivity over IPSec optical SFP – Access Control – Built-in 2 Ethernet ports Packet-Filtering based on policy type: – Multiple WANs per fractional E1/T1 interface is à Inbound/Outbound direction supported, up to 64 WAN per system à Source/Destination IP Address Range (maximum 16 WAN supports PPP à Any Protocol Types (ICMP, TCP, UDP, etc.) encapsulation) à TCP/UDP Port Number Range 1 control list per interface LAN Interface Up to 100 rules per control list – 4 Ethernet ports – 802.1x port-based authentication* – Multilevel login privilege control All Ethernet Interfaces – Radius Client is supported, up to 3 Radius servers – 10/100BaseT available for addressing. – Speed and duplex-mode auto-negotiation – SSHv1/v2 – Auto MDI/MDI-X cross-over – SNMPv3 1
Loop-IP6510-LN Multiple WAN Router
Layer 2 Encapsulation Protocols – PPP, MLPPP, Cisco HDLC, raw HDLC Management – Telnet and SSHv1/v2 (up to 4 concurrent sessions) – SNMPv3 – Multilevel login privilege control – Syslog – NTP Client for IPv4, up to 4 NTP server QoS – Policy based Egress Rate Limiting – Traffic Classification based on Outbound direction IPv4 or IPv6 Source/Destination IP Address Range TCP/UDP Port Number (DSCP+ENC) 1byte field / ToS 1 byte field Any Protocol Type
Ethernet Access
DHCP – DHCP Server/Relay for IPv4/IPv6 – BOOTP compatible for IPv4 Software Bridging* – Frame size up to 1916 bytes* – IEEE 802.2x Flow Control* – STP(802.1d) *, RSTP(802.1w) *, MSTP(802.1s) * – Up to 16K MAC Table* – User-configurable MAC aging time* – Ethernet FCS padding/unpadding* – 802.1x port-based authentication* – VLAN* Support up to 4094 VLANs* VLAN ID mapping* Support Q-in-Q * Support VLAN Routing* * Future option
Ordering Information To specify options, please choose from the list below. Note: RoHS compliant units are identified by the letter G appearing at the end of the ordering code. Model Main Unit Loop-IP6510-LN-aa-bb-pp-RT-G
Additional Cold Plug-in Modules Loop-IP6510-LN-2T1-G Loop-IP6510-LN-2E120-G Loop-IP6510-LN-1FE-G Loop-IP6510-LN-SFPH-G
Description
Notes
1U height ETSI (front access) unit, stand-alone with two built-in 10/100BaseT WAN interfaces and four 10/100BaseT LAN interfaces, which supports Router functionality
Where aa, bb and pp modules are defined in the tables below
Dual T1 interface with RJ48C connector Dual E1-120 ohm interface with RJ48C connector One 10/100 BaseT Fast Ethernet, RJ45 electrical port SFP (mini-GBIC) housing for 100M-FX
E1-120 ohm/T1 jumper selectable
SFP optical modules not included
SFP Optical Modules SFP (small form-factor pluggable) optical modules are NOT included. To order please check the SFP optical module brochure or contact your nearest Loop sales representative. Accessories Power Cord (All power cords are RoHS compliant) Loop-ACC-PC-USA AC power cord for Taiwan/America Loop-ACC-PC-EU Loop-ACC-PC-UK
AC power cord for Europe AC power cord for UK
2
Loop-IP6510-LN Multiple WAN Router
Loop-ACC-PC-AUS
Ethernet Access
AC power cord for Australia
Loop-ACC-PC-CH
AC power cord for China
Ear Mounts 30.001563.A00LF 30.001766.A00LF
A pair of 19” ear mounts A pair of ear brackets for wall mount
User’s Manual User’s Manual (optional, printed on paper copy). A CD version of the manual is already included as standard equipment.
Loop-IP6510-LN-UM Firmware Upgrade Loop-IP6510-LN-FWUPGR
Firmware Upgrade. Customers who desire to have a firmware upgrade after their warranty has expired can purchase this option. This will upgrade the firmware to the most current version and provide an additional 12 months of software repair and patches on existing functionality as necessary.
Replace the fields aa and bb with the cold plug-in modules desired. If such modules are not required, then please omit the aa or bb field in the ordering code. aa, bb = 2T1 2E120 1FE
Description Dual T1 interface with RJ48C connector Dual E1-120 ohm interface with RJ48C connector One 10/100 BaseT Fast Ethernet
Notes E1-120 ohm/T1 jumper selectable
Replace the field pp with your selection of a power supply. pp = P9
Description Hybrid 100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) coexist fixed power supply
Notes For AC, choose an appropriate power cord.
Loop-IP6510-LN Product Specifications Ethernet WAN Interface Two built-in 10/100BaseT Ethernet ports (WAN1 and WAN2) Speed auto-sensing Half / full duplex auto-negotiation Auto MDI/MDI-X crossover WAN Plug-in Modules E1 card: 2 ports per card, up to 4 ports per system T1 card: 2 ports per card, up to 4 ports per system Electrical Ethernet card: 1 port per card, up to 2 ports per system Optical Ethernet card: 1 port per card, up to 2 ports per system Layer 2 E1/T1 WAN protocols: PPP, MLPPP, HDLC, Cisco compatible HDLC E1 Line Interface Line Rate Line Code Output Signal Connector Loopbacks Test Pattern
2.048 Mbps ± 50 ppm HDB3 ITU G.703 RJ48C Line Loopback, Payload Loopback 20-bit QRSS, 3-in-24, 1-in-8, 2-in-8, 1:1
T1 Line Interface Line Rate Line Code Output Signal
1.544 Mbps ± 50 bps AMI or B8ZS DS1
3
Loop-IP6510-LN Multiple WAN Router
Connector Loopbacks Test Pattern
Ethernet Access
RJ48C Line Loopback, Payload Loopback 20-bit QRSS, 3-in-24, 1-in-8, 2-in-8, 1:1
SFP Optical Ethernet WAN Interface Speed 100 Base-FX Full Duplex Mode Supported Automatic Laser Shut Down Supported Switch L2 Switch not supported Temperature Range -20C to +65C TDM WAN Interface One WAN per Fractional E1/T1 port, Up to 4 WANs per system Configurable Nx64K per WAN. Multiple WAN per Fractional E1/T1 port, up to 64 WANs per system LAN Interface Four 10/100BaseT interfaces Speed auto-sensing Half / full duplex auto-negotiation Auto MDI/MDI-X crossover Management and Administration Console Port Electrical: RS232 CLI management via console port Remote Login Telnet, SSH SNMP SNMP v1, v2 and v3 Diagnostics Ping, Traceroute, Loopback Router Supports IPv4 and IPv6 Routing protocol: RIP v1, RIP v2, RIPng, OSPF v2, OSPF v3, and BGP4 Multicast Protocol: IGMP, MLD*, IPv4 PIM-SM/DM, IPv6 PIM-SM/DM* VLAN routing L2 Protocol: PPP, MLPPP, Cisco HDLC, Raw HDLC Address Translation NAT / NAPT Static address table for NAT Port forwarding table for NAPT (Virtual Service) DHCP DHCP server support for LAN users (RFC 2131, RFC 2132) BOOTP compatible DHCP relay DHCP client Access Control & Firewall Packet filtering based on z Source/destination IP address z Protocol types (ICMP, TCP, UDP) z Source/destination port number (UDP or TCP) QoS QoS based on rate limit Classification based on z Source/destination IP address z Protocol types (ICMP, TCP, UDP) z Source/destination port number (UDP or TCP) IPSec VPN Encryption Authentication Key Management Tunnels
DES, 3DES, AES MD5, SHA-1 Manual Key, IKEv2 Up to 64 concurrent tunnels per interface
4
Loop-IP6510-LN Multiple WAN Router
Electrical Power Source (AC) Power Source (DC) Power Consumption
Ethernet Access
100 to 240 Vac, 0.8 A -36 to -72 Vdc, 1.2 A < 20 W
Physical and Environment Dimensions 334.5 x 44 x 226.41 mm (W x H x D) Mounting Stand-alone, wall mount Temperature Range 0° C to 55° C Humidity 0% - 95% RH (non-condensing) Standards Compliance IEEE IETF ITU
802.1q VLAN, 802.3u RIP1 (RFC 1058), RIP2 (RFC 1389), OSPFv2 (RFC 2328), OSPFv3 (RFC 5340), BGP (RFC 4271) G.703, G.704, G.823
Compliance EMC/EMI Safety
FCC15 Class A, EN55022, EN55024 IEC60950-1 (CB)
* Future option
Front Panel View
5
Loop-IP6510-LN Multiple WAN Router
Ethernet Access
Application Illustrations (up to 4 E1/T1 links) MLPPP Bundle
LAN
LAN IP6510-LN
IP6510-LN
Multilink PPP
IPv4 and IPv6 Interworking
Data Comm for Business, Inc. 2949 CR 1000 E Dewey, IL 61840 Voice 8004DCBNET (800.432.2638) Fax 217.897.1331 Info www.dcbnet.com/contact.html Web www.dcbnet.com
6
