DEPARTMENT OF MECHANICAL ENIGINEERING, UNIVERSITY OF ENGINEERING & TECHNOLOGY LAHORE (KSK CAMPUS).

Lab Incharge 1. Capt. (R) I A Hashmi 2. Mr. Rizwan Awan

Coordination Staff: Mr.Mohsin Awan (Lab Attendant)

Apparatuses Detail

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.

4 STROKE DIESEL ENGINE MODEL Experimental Impulse Turbine Experimental Reaction Turbine Two Stage Compressor Test Unit Nozzle Pressure Distribution Unit Transparent combustion Engine Combustion Laboratory Unit 4 Stroke Diesel Engine 4 Stroke Petrol Engine Electric Dynamometer and Generator Dead weight Calibrator 4 Stroke Petrol Engine Model ABS Braking System Disc Baking System Power Steering Fuel Injection Pump Door Door White Board Notice Board Chairs Teacher Table Black Board

1. 4 SROKE DIESEL ENGINE DEMONSTRATION UNIT

Objectives Objectives:1.To Study and Identify 1. To Study and Identification of the different parts. the different parts. 2. Toobserve Observe Working 2. To Howthe Diesel Engine Woks. of Diesel engine. 3. of fuel cyclingthe andfuel 3.To ToStudy Demonstrate combustion process.

cycling and combustion process.

Objectives 1. To Investigate the torque/ speed and power /speed Objectives:Characteristics of a single 1. To Investigate of torque/ speed stage reaction and power /speed turbine. characteristics of the a single stage 2. To observe first law reaction turbine.

of Thermodynamics to a 2. To Observe thesystem first law of simple open Thermodynamics a simple open undergoing a to steady flow system under going a steady flow process. process.

3.ToDetermine To Determine the 3. of theof isentropic efficiency of a turbine. isentropic efficiency of a turbine. 4. construction of retardation curve and from this the 4. The construction determination of the effectofof retardation curve and and resistances due to mechanical fluid fromfriction. this the determination of the effect of resistances due to mechanical and fluid friction.

2.

EXPERIMENTAL REACTION TURBINE

Objectives 1. To Investigate the torque/ speed and power /speed

3. EXPERIMENTAL IMPULSE TURBINE

Characteristics of a single stage reaction turbine. 2. To observe the first law of Thermodynamics to a simple open system under going a steady flow process. 3. To Determine the isentropic efficiency of a turbine. 4. The construction of retardation curve and from this the determination of the effect of resistances due to mechanical and fluid friction.

4. Objectives 1. To Investigate the variation in air flow rate, with compressor pressure ratio:- With and without intercooling 2. To Investigate the variation in volumetric efficiency with compressor pressure ratio:- With and without intercooling 3. To Investigate the variation of isothermal efficiency with compressor pressure ratio:- With and without intercooling 4. To Investigate the compressor performance relative to electrical power:- With and without intercooling 5. To study the operation of the compressor of as a single stage device.

2 STAGE AIR COMPRESSOR

5.

Objective

Analysis Nozzle pressure distribution.

NOZZLE PRESSURE DISTRIBUTION UNIT

[Type sidebar content. A sidebar is a standalone supplement to the main document. It is often aligned on the left or right of the page, or located at the top or bottom. Use the Text Box Tools tab to change Objectives:Objectives the formatting of the sidebar text 1. To Identify the parts and box. manual operation of the Type content. A sidebar is 1. Tosidebar Study and identify Megatech Mark III engine. a standalone supplement Objectives:the different parts. to the 2.To Examine theIt4isstrokes of the main document. often aligned Megatech Mark III Engine. on the left or right of the page, or 2. To Observe the Working

8.

4-STROKE DIESEL ENGINE(1600CC)

located at the the top Engine or bottom. ofTo demonstration ofwithUse Prove that 3. Operate the Text Box Tools tab to change Variable engine.Timing. Pressure = Force Area the formatting of /the sidebar text 4. the working box.] 3.To ToObserve Demonstrate ofoffuel Carburetor and Fuel Controls.

cycling and combustion

5. To Operate the Megatech Mark process. III Engine with Different Fuels.

9. Objectives:1. To Investigate of turndown ratio and firing rate 2. To Investigate of air/fuel ratio and stoichiometeric condition

Objectives:3. To Compare the practical and theoratical flue gas analysis of 1. To Study and Identification the parts engine. 4. Todifferent Compare the of two liquid fuels

Objective 2. To observe the Working of the 5. To Compare the two gaseous engine. fuels Study and Identify 1.To

the 3. Todifferent observe theparts. fuel cycling and 6. Heat Balance combustion process in Engine. 2.Energy To Observe 7. Balancethe Working of demonstration of

8. Temperature Measurment engine. Experiments

3. To Demonstrate of fuel cycling and combustion process.

4-STROKE PETROL ENGINE(1600CC)

[Type sidebar content. A sidebar is a standalone supplement to the Objective main document. It is often aligned on the left or right of the page, or To observe the located at the top or bottom. Use measurement the Text Box Tools of tabpressure to change with externally the formatting of theapplied sidebar text box. force.

11. DEAD WEIGHT CALLIBRATOR

Type sidebar content. A sidebar is a standalone supplement to the main document. It is often aligned on the left or right of the page, or located at the top or bottom. Use the Text Box Tools tab to change the formatting of the sidebar text box.]

12. 4-STROKE PETROL ENGINE DEMONTRATION UNIT To study the working processes of a four stroke petrol engine

13. ABS BRAKING SYSTEM

Objectives:To Study of ABS(Automatic Braking System) and Its Working

14. HAND BRAKE

Objectives:To Study of Disc Operating System and Its Working

15. POWER STEERING

Objectives:To Study Power Steering

16. FUEL INJECTION PUMP

Objectives:To Study the working of fuel injection pump