DAYTIME RUNNING LIGHTS

MOTOR HOMES

2

Simply safe! Official studies have shown that driving with daytime running lights is simply safer because the vehicle is visible to other drivers more easily and sooner. As of 2011, all new vehicles in the ECE registration area must be equipped with daytime running lights. Cost benefits 90 % fuel savings compared to low-beam light An official study conducted by the German Road Traffic Authority (BAST or Bundesanstalt für Straßenwesen) showed that daytime running lights consume up to 90 % less fuel than with activated low-beam light. In addition to the financial benefits, there is also the same savings potential with regard to CO2 emissions. Summary HELLA daytime running lights are not only safer, but also less expensive and more environmentally friendly than conventional low-beam lights. If you also consider the fact that LEDs have an extremely long service life, there is basically no question that HELLA daytime running lights are the perfect solution both technologically and economically. Online information For more detailed information on daytime running lights, please visit http://www.hella.com/soe/caravan or www.daytime-running-light.com

3

The world's first flexible daytime running lights: LEDayFlex Design A current trend in vehicle design is the customisation of headlamp design for daytime and night-time driving. The lighting technology that we have further developed with our “LEDayFlex” daytime driving lights is the foundation for exciting design solutions.

Technology “LEDayFlex” light chains with 5 to 8 firmly connected LED light modules can be integrated into an almost infinite number of configurations in the vehicle front-end. In the process, they follow the shape of the vehicle's contours in depth. “LEDayFlex” allows for many different design options as long as they comply with legal regulations. Designs can include a powerful daylight-like light signal during the day and, if desired, in versions with the option to switch over to position lighting, also at night. This gives the designer a powerful system.

Design Designing a vehicle-specific lens set.

4

Set including electronic modules

Accessories

5 LED light modules for daytime running light

2PT 010 458-801

Connecting cable set including mating connector

8KA 165 959-001

5 LED light modules for daytime running light with position light

2PT 010 458-811

2-wire extension cable 500 mm in length

8KB 178 139-001

6 LED light modules for daytime running light

2PT 010 458-821

AMP mating connector (1 set)

8KW 744 807-801

6 LED light modules for daytime running light with position light

2PT 010 458-831

AMP mating connectors (10 units)

8JA 746 184-032

7 LED light modules for daytime running light

2PT 010 458-841

Connector contacts (50 units)

8KW 744 837-002

7 LED light modules for daytime running light with position light

2PT 010 458-851

Individual seals (50 units)

9GD 746 185-002

8 LED light modules for daytime running light

2PT 010 458-861

Electronics module for 12 V/24 V

5DS 010 668-001

8 LED light modules for daytime running light with position light

2PT 010 458-871

Electronics module for position light version 12 V/24 V

5DS 010 668-011

5

LED daytime running lights

LED daylight running lights, rectangular LED daytime running light set with silver-grey aluminium housing and integrated electronics. Bracket for upright and suspended installation in or on the front apron. Power consumption: 12 V/5.5 W. Set includes: 2 lights each with 3 LEDs, professional cable set with AMP supersealed plug, bracket.

Set Daytime running light set

Set 2PT 009 496-801

Single light with PO function with attached cable and 3-pin AMP plug

for installation

2PT 009 599-811

Single light 2PT 009 496-007

Optional accessories

6

LED daylight running set, round with integrated electronics including cable set, universal bracket, 3 powerful LEDs per light, multi-voltage 9–33 V, 12 V / max. 5.5 W, current consumption = ca. 2.18 A

without bracket, left

2PT 009 599-111

without bracket, right

2PT 009 599-121

without bracket, with PO function, left

2PT 009 599-131

without bracket, with PO function, right

2PT 009 599-141

Optional accessories

Connecting cable set including mating connector

8KA 165 959-001

Mounting plate, front screw connections

9AH 165 968-101

3-pin AMP mating connector (1 set)

8KW 744 807-801

Bracket for suspended mounting, 3-pin plug

8GH 165 967-001

3-pin AMP mating connector (1 set)

8KW 744 807-801

LED daytime running lights LEDayLine 15

LEDayLine 30

LEDayLine® LED daytime running lights LED daytime running light set with integrated relay in black plastic housing and fastening springs for mounting in the front apron. Set includes: 2 lights each with 5 LEDs, professional cable set with AMP supersealed plug, fastening springs. Power consumption 8 W.

LEDayLine® LED daytime running lights LEDayLine 15 and LEDayLine 30 daytime running light sets for horizontal installation, with 2.5 m connecting cable and separate changeover relay for automatically turning daytime running lights on and off or for switching over to position light. Set includes: 2 lights each with 8 LEDs, changeover relay, comes with mounting frame.

LEDayLine 15

Set

LEDayLine 30

LEDayLine 15** set

with position light, 12 V incl. professional cable set

2PT 010 043-801

12 V daytime running light

2PT 980 860-801

with vehicle-specific cover*

2PT 010 043-811

12 V daytime running light with position light

2PT 980 860-811

24 V daytime running light

2PT 980 860-851

24 V daytime running light with position light

2PT 980 860-861

Single light Daytime running light with position light, 12 V, left

2PT 010 043-011

Daytime running light with position light, 12 V, right

2PT 010 043-021

LEDayLine 30** set

Daytime running light with position light, 24 V, left

2PT 010 043-031

12 V daytime running light

2PT 980 850-801

Daytime running light with position light, 24 V, right

2PT 010 043-041

12 V daytime running light with position light

2PT 980 850-811

24 V daytime running light

2PT 980 850-851

24 V daytime running light with position light

2PT 980 850-861

Optional accessories Connecting cable set including mating connector

8KA 165 959-001

3-pin AMP mating connector (1 set)

8KW 744 807-801

* In black (can be painted), suitable for Fiat Ducato, Citroen Jumper, Peugeot Boxer. ** Available as of the 4th quarter 2011

7

LED daytime running lights

LED daytime me ru runn running nn n nin ing g li llights, ligh igh ghts, ts ro rodrod-shaped od-sh ssh haped hap ed d LED daytime running light horizontal installation, with 22.55 m connecting cable and g liligh ghtt se sett fo forr ho hori rizo zontal installation separate changeover relay for automatically turning the lights on and off. Set includes: 2 lights each with 12 powerful LEDs, attachment screws and changeover relay.

Set

Set

12 V daytime running light set

2PT 980 680-801

12 V daytime running light set

2PT 980 680-821

24 V daytime running light set

2PT 980 680-851

24 V daytime running light set

2PT 980 680-861

Single light

8

LED daytime running rod-shaped me ru runn nn nni nin ing li ing llights, igh gh htts ts, ro ts, rod d-sh dshap haped d LED daytime light installation, with 2.5 m connecti connecting cable and me running g ligh g t set for horizontal installation separate changeover relay for automatically turning the lights on and off. Set includes: 2 lights each with 12 powerful LEDs, attachment screws and changeover relay. Delivery includes mounting frame.

Single light

12 V

2PT 980 680-001

12 V

2PT 980 680-101

24 V

2PT 980 680-501

24 V

2PT 980 680-601

Daytime running lights with light bulbs

90 mm daytime running lights and spotlights or fog lights Module headlights with optic-free glass cover with H15, 55 W / 15 W light bulb, with carrier frame.

90 mm daytime running lights and LED position lights Lights with optic-free glass cover, with P21W long-life light bulb and Kartoval LED.

Single light

Single light

with daytime running light / spotlight, 12 V

1F0 010 293-001

with daytime running light / position light, 12 V

with daytime running light / spotlight, 24 V

1F0 010 293-011

24 V on request

with daytime running light / fog light, 12 V

1N0 010 294-001

with daytime running light / fog light, 24 V

1N0 010 294-011

Optional accessories Plug set, 3-pin

2BE 010 102-101

Optional accessories Mounting plate, front screw connections

9AH 165 968-001

Plug set, 3-pin

8JD 162 581-802

8JD 162 581-802

9

LED multi-function lights

83 mm m LE L LED ED 3 fu func functional ncti nc tion ti onaal on al llights: ig ght h Indicator, ator at or, po or p position osiiti tion on n llight, ight ig h , da d daytime ayt yi running ing ligh in lli light igh g t The iintegrated circuitry upp such lights when indicating, nteegr g atedd eelectronic leectro cttronic circ cui u trr is set et u ch h tthat hat th ha thee ddaytime aytim me rrunning g ligh gh hts ddim im w hen in hen he indi d caating di g pre-wired metre cable. -wired wi with th 2.5 met etre re ssheathed heathee four-core ur-core ca cabl ble. e.

Single light

Optional accessory 90 adapter oryy - 9 0 mm ada er rring in ng The adapter ring used to replace a 90 mm light with the 83 mm light. This means that vehicles g is u igh g tw that have comee equ equipped q ipped with a Hella 90 mm light ccan be easily converted to 83 mm lights.

Optional accessories

12 V, 83 mm LED 3 functional lights

2BE 980 691-101

24 V, 83 mm LED 3 functional lights

2BE 980 690-101

Adapter ring 90 mm

* Operating the lights with AC voltage or switched DC voltage is not permissible! The light's individual functions may only be operated with an on-board fuse of max.3 A (per light). In case of an on-board current limit amounting to the above specification due to the control unit, there is no need for an additional fuse for the lights. 12 V version upon request.

10

9GD 980 696-001

Daytime running light including position lights

Only daytime running lights

max. 1500 mm

max. 400 mm

max. 1500 mm min. 250 mm*

min. 350 mm*

min. 600 mm**

min. 600 mm**

Legislation allows for various installation options. However, the distances and beam angles to be adhered to are specified.

Check online for more information on other legal requirements and installation regulations. See the assembly instructions for more detailed information.

■ ** For vehicles with a width < 1,300 mm, the distance must be at least 400 mm. ■ When using the daytime running light as a position light, the standard position light has to be deactivated according to ECE-R-48.

min. = minimum distance max. = maximum distance

11

HELLA KGaA Hueck & Co. Rixbecker Straße 75 59552 Lippstadt, Germany Tel.: +49 2941 38-0 Fax: +49 2941 38-7133 Internet: www.hella.com HELLA Limited Wildmere Industrial Estate Banbury, Oxon OX16 3JU Tel.: (01295) 225600 Fax: 0800 7832571 E-mail: [email protected] Website: www.hella.co.uk © HELLA KGaA Hueck & Co., Lippstadt 9Z2 999 131-252 XX/08.11/0.5 Printed in Germany