Cylinders with piston rod locking unit (ISO) RM/8000/L4 Ø 12 to 25 mm
Passive
Locking unit
Standard models Magnetic piston as standard conforms to ISO 6432 Secure locking of piston rod in any position Passive locking model Aids compliance with the Machinery Directive and PUWER regulations Fast, reliable operation
12 16 20 25
If retro fitting locking unit, the cylinder must be of an extended piston rod design.
Passive locking unit only QM/8012/59 QM/8012/59 QM/8020/59 QM/8025/59
Complete magnetic cylinder Buffer cushion RM/8012/L4/* RM/8016/L4/* RM/8020/L4/* RM/8025/L4/*
* Insert stroke length in mm. Locking unit includes cartridge. For all applications please consult our Technical Service.
stroke
Technical data Medium: Compressed air, filtered, lubricated or non-lubricated. Operating pressure: 4 to 10 bar Operating temperature: -10°C to +80°C max. Consult our Technical Service for use below +2°C
Materials Body: hard anodised diecast aluminium Seals: polyurethane Cartridge body: anodised aluminium Cartridge locking wedges: hardened steel Cartridge seals: nitrile rubber Ø 12 16 20 25 Ø 12 16 20 25
AB 21 21 24 24 BE M16x1,5 M16x1,5 M22x1,5 M22x1,5
AC 13 13 14 14 BF 12 12 23 23
AD 47 47 62 64 EE M5 M5 M5 M5
ØAE 8,5 8,5 9 9 SW (A/F) 8 8 8 8
ØAF 20 20 22 22 SW1 (A/F) 18,5 18,5 20,5 20,5
AG 20 20 27 27
AH 20 20 38 38 WF 17 17 27 29
AJ 4 4 4,5 4,5 XC 108 115 142,5 151,5
AL 55,5 55,5 60 60 kg at 0 mm 0,130 0,140 0,300 0,360
AK 10 10 19 19 kg per 25 mm 0,011 0,012 0,018 0,028
Lock retention forces Ø 12 16 20 25
Retention force (N) 180 N 180 N 350 N 350 N
Cylinder sizing and speed control see page 6
www.norgren.com/info/en015
15
Actuators
Guide blocks with roller bearings for RM/8000/M (ISO) QM/8000/61 Ø 12 to 25 mm
Conforms to ISO 6432 Allows high axial loads to be applied to the end of the piston rod Accurate piston rod guidance Supplied complete with centering sleeves
Technical data Operating temperature: 0°C to +80°C maximum
Standard models Ø 12 16 20 25
Piston rod Ø 6 6 8 10
Model QM/8012/61/* QM/8012/61/* QM/8020/61/* QM/8025/61/*
* Insert stroke length in mm from table below. For all applications please consult our Technical Service.
Consult our Technical Service for use below +2°C
Materials Body, front plate & mounting plate: anodised aluminium Guide rods: steel inductive hardened Wiper and seals: nitrile rubber
Standard strokes Ø 12 16 20 25
50 º º º º
100 º º º º
160 º º º º
200 º º º º
250 º º º º
320
400
500
º º º
º º º
º º º
Other stroke lengths are not available, use nearest standard stroke.
16
www.norgren.com/info/en016
Guide blocks with roller bearings for RM/8000/M (ISO) QM/8000/61 Ø 12 to 25 mm
stroke
*Centering sleeve **Adjustment range *** Safety zone (28 min)
Ø 12 & 16 20 25 Ø 12 & 16 20 25
EA 132 160 160 FA 5,5 6,5 6,5
EB 75 108 108 FB 22 23 23
EC 32,5 32,5 32,5 FC 30 34 34
ED 19 24 24 ØFD 5,5 6,6 6,6
EF 37 58 58 FE M4 M6 M6
EG 10 12 12 FF 9 11 11
EJ 76 90 90 ØFG H7 6 9 9
EK 63 76 76 FH 32 40 40
EL 46 58 58 FJ 54 68 68
FK 65 79 79
EM 24 38 38 FL 15 20 20
EO 10 13 17 FM 10 14 14
EP ER 8 24 13 38 13 38 ØFO H7 FP 9 M5 9 M6 9 M6
ES ET EV 65 6,5 4,6 75 8,5 5,7 75 8,5 5,7 ØFR f6 ØFS FV 6 8 M6 9 10 M 8 9 10 M 10 x 1,25
EW Ø EX 27 8 32 10 32 10 FW kg at 0 mm 27 0,40 37 0,65 37 0,65
Ø EY EZ 4,5 M4 5,5 M5 5,5 M5 kg per 100 mm 0,04 0,06 0,06
Note: supplied complete with cylinder mounting screws and two centering sleeves.
Maximum load for QM/8000/61/*
*Centre of gravity of load capacity **Outstroke
*Centre of gravity **Outstroke
Maximum load capacity is dependent on the outstroke of a horizontally installed guide unit. In the case of short stroke operation, the load capacity figures taken from the diagram must be multiplied by the correction factor (diagram 2). In the load capacity graph (diagram 1), the short stroke corrections have already been taken into account for an outstroke > 60 mm. Maximum load capacity depending on outstroke (diagram 1) (diagram 2) Load capacity (N)
Correction factor
Outstroke (mm)
Deflection caused by own weight (diagram 3) Deflection (mm)
Stroke (mm)
The total deflection of guide rods will be determined by the addition of that due to own weight (diagram 3) and that due to load capacity (diagram 4). Deflection caused by a load of 10 N (diagram 4) Deflection (mm)
Outstroke (mm)
Outstroke (mm)
Reduction of load capacity for short stroke operation In the case of shock load applications, the figures given in the diagrams above must be reduced by a factor of 2.
17
Actuators
Roundline cylinder mountings For RM/28000/M, RM/8000/M and KM/8000/M (ISO)
Piston rod swivel – AK ISO 8139
KK M4 M6 M8 M 10 x 1,25
B1 2 3 4 5
F 12,5 14 18 26
Front flange – G Rear flange – B ISO 6432
L 33 39 55 73
L2 8 12 16 20
SW1 11 7 10 19
SW2 3,2 5 7 12
SW3 7 10 13 17
SW4 11 13 17 30
kg 0,01 0,02 0,05 0,20
Foot – C ISO 6432
Ø 10 12 + 16 20 + 25
Ø AB 4,5 5,5 6,6
Ø 12 + 16 20 + 25
AH 16 20 25
L1 8 8
AO 6 6 7,5
AT 2 3 4
AU 10 13 16
E 35 43 53
TR 25 32 40
kg 0,02 0,03 0,06
MF 3 4 5
TF 30 40 50
UF 40 51 (52) 63 (66)
UR 22 28 (30) 38 (40)
kg 0,02 0,03 0,05
( ) stainless steel version
Ø TD +0,03 TL 6 10 6 10
CA 24 27 27 30 30
G1 11 13 13 16 16
Thread KK M4 M6 M8 M10 x1,25
CE 16 24 32 40
Ø CK h11 4 6 8 10
CL 8 12 16 20
CM 4 6 8 10
ER 6,5 9,5 13 16
LE 8 12 16 20
K1 13,5 20 20 25 25
K2 10,5 15 15 20,5 20,5
RK 11,5 17,5 22 28
TM 38 46
UW 25 30
Ø 10 12 16 20 25
kg 0,05 0,07
CA 12 20 20 25 25
G1 6,5 18,5 18,5 20 20
G2 – 15 15 15 15
G3 15 30 30 35 35
G4 6 8 8 10 10
H2 1 1,5 1,5 2 2
K3 2 3 3 3 3
ØS 4,8 5,5 5,5 6,6 6,6
Nose nut - N
G2 12,5 15 15 20 20
G3 20 25 25 32 32
G4 4 5 5 6 6
kg 0,01 0,02 0,06 0,10
Rear hinge – L
Rear hinge – L2
18
Ø FB 4,5 5,5 6,6
Piston rod clevis - F ISO 8140
Front or rear detachable trunnion – FH
Ø 10 12 16 20 25
Ø 10 12 + 16 20 + 25
H2 2,5 3 3 4 4
K1 17,5 23 23 29,5 29,5
K2 13 18 18 24 24
ØS 4,5 5,5 5,5 6,6 6,6
kg 0,018 0,035 0,035 0,077 0,077
Ø 10 12 + 16 20 + 25
BE M12x1,25 M16x1,5 M22x1,5
KV (AF) 19 22 27
KW 6 5 8
kg 0,01 0,009 0,02
kg 0,01 0,02 0,02 0,04 0,04
Roundline cylinder mountings For RM/28000/M, RM/8000/M and KM/8000/M (ISO)
Universal piston rod eye – UF
Thread KK M4 M6 M8 M10x1,25
AX 14 14 16 25
CE 27 30 36 42
Ø CN H7 5 6 8 10
EN -0,1 8 9 12 14
ER 8 9 11 14
LE 10 11 13 15
Z 5˚ 5˚ 5˚ 5˚
kg 0,02 0,02 0,05 0,08
Brackets ∫ 15 mm stroke
* Magnetically operated switch **Switch mounting bracket
For switches M/50, QM/34, QM/134 (Ø 8 mm) Ø 10 12 16 20 25
B 8 8 10 10 10
R max. 16 18 20 22 24
kg 0,01 0,01 0,01 0,01 0,01
Brackets < 15 mm stroke
* Magnetically operated switch **Switch mounting bracket
For switches M/50, QM/34, QM/134 (Ø 8 mm) Ø 10 12 16 20 25
S 27,5 28,5 29,5 29,5 31,5
T 19,5 21,5 23,5 26 28,5
kg 0,01 0,01 0,01 0,01 0,01
19
Actuators
Roundline cylinders RT/57100/M Single acting Ø 8 to 40 mm
One fifth shorter than the basic length of a corresponding ISO/VDMA cylinder Low friction, long life seals High strength, double crimped end cap design Standard magnetic piston for full control system versatility Non-lube operation Choice of porting option for compact installation
Standard models Ø 8 10 12 16 20 25 32 40
Port size
Side port, integral eye mounting Sprung in Sprung out RT/57108/M/* RT/57308/M/* RT/57110/M/* RT/57310/M/* RT/57112/M/* RT/57312/M/* RT/57116/M/* RT/57316/M/* RT/57120/M/* RT/57320/M/* RT/57125/M/* RT/57325/M/* RT/57132/M/* RT/57332/M/* RT/57140/M/* RT/57340/M/*
M3 M5 M5 M5 Rc 1/8 Rc 1/8 Rc 1/8 Rc 1/8
Central rear port Sprung in RT/57108/MC/* RT/57110/MC/* RT/57112/MC/* RT/57116/MC/* RT/57120/MC/* RT/57125/MC/* RT/57132/MC/* RT/57140/MC/*
Sprung out RT/57308/MC/* RT/57310/MC/* RT/57312/MC/* RT/57316/MC/* RT/57320/MC/* RT/57325/MC/* RT/57332/MC/* RT/57340/MC/*
*Insert stroke length in mm. Service kits are not available for these cylinders.
Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: RT/57100/M Single acting, sprung in RT/57300/M Single acting, sprung out Operating pressure: 2 to 10 bar (Ø 8 mm: 3 to 10 bar) Operating temperature: -5°C to +80°C max.
Piston rod Ø 3 4 4 6 8 10 12 14
Ø 8 10 12 16 20 25 32 40
RT/57100 Theoretical forces (N) at 6 bar F1 Outstroke 22,7 3,6 38,2 4,6 56,2 6,1 101 10,5 161 14,5 264 20 432 32 687 44
F1 = Return force of spring (N)
RT/57300 Theoretical forces (N) at 6 bar F1 Instroke 18,6 3,6 30,8 4,6 48,4 6,1 84,5 10,5 131 14,5 217 20 364 32 594 44
Standard strokes Ø 8 10 12 16 20 25 32 40
10 º º º º º º
25 º º º º º º º º
50 º º º º º º º
¬ Indicates stocked stroke lengths of standard models highlighted in table above.
Cylinder sizing and speed control see page 6
Consult our Technical Service for use below +2°C
Strokes: Standard, see table Non-standard 150 mm max.
Materials Piston rod: stainless steel (Ø 8 to 16 mm Martensitic, Ø 20 to 40 mm Austenitic) Barrel: stainless steel (Austenitic) End covers: aluminium Wiper: polyurethane Seals & O-rings: nitrile rubber
Options selector RT/57˙˙˙/˙˙/˙˙˙ Operating Sprung in Sprung out
Substitute 1 3
Strokes (mm) 150 max. Variants Standard Central rear port Cylinder diameters (mm) 08, 10, 12, 16, 20, 25, 32, 40
Switches With integral cable
Reed Solid state
Model M/50/LSU/*V M/50/EAP/*V
With plug-in cable
M/50/LSU/CP M/50/EAP/CP
Note: Disregard option positions not used. For combinations of cylinder variants consult our Technical Service.
Plug-in cable M/P73001/5 (5 m) M/P73001/5 (5 m)
*Insert cable length – 2, 5 or 10 m. For details see page 198
20
Substitute M MC
www.norgren.com/info/en020
Roundline cylinders RT/57100/M Single acting Ø 8 to 40 mm
Mountings Ø
AK
C
F
L
M
N
N2
UF
8 10 12 16 20 25 32 40
– QM/8010/38 QM/8010/38 QM/8012/38 QM/8020/38 QM/8025/38 QM/8025/38 QM/8040/38
M/P71273/1 M/P71273/2 M/P71273/2 M/P19369 M/P19389 M/P40381 M/P19406 M/P71273/3
QM/57008/25 QM/8010/25 QM/8010/25 QM/57016/25 QM/57020/25 QM/57025/25 QM/57032/25 QM/57040/25
QM/57008/24 QM/947 QM/947 QM/946 QM/8012/24 QM/57025/24 QM/8020/24 QM/57040/24
QM/57008/26 QM/57010/26 QM/57010/26 QM/57016/26 QM/57020/26 QM/57025/26 QM/57032/26 QM/57040/26
M/P71364 M/P71364 M/P71364 M/P1501/90 M/P13834 M/P13607 M/P13615 M/P29254
M/P1500/111 M/P1501/80 M/P1501/80 M/P1501/79 M/P1501/60 M/P1501/89 M/P1501/89 M/P1501/90
– QM/8010/32 QM/8010/32 QM/8012/32 QM/8020/32 QM/8025/32 QM/8025/32 QM/8040/32
Please see page 24 for details of mountings.
Switch mounting brackets
QM/33/010/22 # QM/33/012/22 # QM/33/016/22 # QM/33/020/22 # QM/33/025/22 # QM/33/032/22 # QM/33/040/22 #
# For use with switches M/50, see page 198
Cylinder variants
Standard cylinders RT/57300/M - sprung out (Ø 8 ... 12 mm)
RT/57100/M - sprung in (Ø 8 ... 12 mm)
RT/57100/MC, RT/57300/MC (Ø 8 ... 12 mm) - Central rear ports
stroke + V
stroke
stroke + V
** Filtered exhaust position, do not obstruct
(Ø 16 ... 40 mm)
(Ø 16 ... 40 mm)
stroke + V
(Ø 16 ... 40 mm)
stroke
stroke + V
** Filtered exhaust position, do not obstruct
Ø 8 10 12 16 20 25 32 40 Ø
A 8 9 9 12 14 16 22 23 LB
Ø B/Ø BA 10 10 10 12 16 18 22 30 L12
BE M10 x 1 M10 x 1 M10 x 1 M12 x 1,25 M16 x 1,5 M18 x 1,5 M22 x 1,5 M30 x 1,5 Ø MM h9
BF 7,5 8 8 10 12 12 15 15 MR
Ø CD h9 3 4 4 5 6 8 8 10 PL
ØD 12 15 15 17,5 22 26,5 33,5 41,5 SW (A/F)
Ø D1 9,5 11,5 13 17,5 21,5 26,5 33,5 41,5 V*
EE M3 M5 M5 M5 Rc 1/8 Rc 1/8 Rc 1/8 Rc 1/8 V**
EW -O,1 6 8 8 10 12 14 16 20 VA/VD
EW1 10 12,5 – – – – – – WF
G 7,5 9,5 9,5 11,5 15,5 15,5 17,5 18 XC
G1 3 4,5 4,5 4 8 8 5,5 5,5 XC1
H KK 5 M3 6,5 M4 6,5 M4 – M6 – M8 – M10 x 1,25 – M10 x 1,25 – M12 x 1,25 57100 57300 kg 50 mm.
44
ØD 36,5 41,5 48 58 71,5 81 104 120 148,5
Stroke (mm) …E 28 32 37 45 55 63 80 94 116,5
EE M5 M5 M5 G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 1/4
Ø FB 3,3 3,3 4,2 4,2 6,8 6,8 8,5 8,5 10,2
FF 10 10 10 18 18 18 22 22 22
GB 3,5 3,5 4,5 4,5 6,5 6,5 8,5 8,5 10,5
…H 26,5 30 35 43 52 60 76 90 113
F – Side load (N)
Outstroke (mm) HF 6 8 8 10 10 12 12 16 20
Ø JB 6 6 7,5 7,5 10,5 10,5 13,5 13,5 16,5
PF 17 19,5 22 27,5 31,5 37 48 57 67
PL 7,5 7,5 8 9 10 10,5 13 14,5 16
RT M4 M4 M5 M5 M8 M8 M 10 M 10 M 12
TG 20 23 27 33 41 48 61 73 90,5
Stroke (mm) TT M3 M3 M4 M4 M5 M6 M8 M 10 M 12
WH 11,5 14 14,5 16,5 16,5 20 20 25 30
ZH 24,5 26 (36) 28,5 (38,5) 29 (39) 31,5 (41,5) 35 (45) 42,5 (52,5) 47 (57) 48,5 (58,5)
ZJ 36 40 (50) 43 (53) 45,5 (55,5) 48 (58) 55 (65) 62,5 (72,5) 72 (82) 78,5 (88,5)
Short stroke cylinder mountings For RM/91000/M, RM/92000/M, RM/93000/M
Front flange – G Rear flange – B
Ø 12 16 20 25 32 40 50 63 80 100
Foot – C
E 26 30 33 38 46 57 64 81 95 118
R 18 22 25 28 36 43 50 63 77 98
Ø FB 3,5 3,5 3,5 4,5 4,5 6,5 6,5 9,5 8,5 11
MF 5 5 5 6,5 6,5 9,5 9,5 12,5 12,5 12,5
TF 38 42 48 54 66 78 90 110 128 156
UF 46 50 56 64 76 92 104 128 146 176
kg 0,02 0,02 0,02 0,04 0,06 0,15 0,17 0,33 0,41 0,72
Ø 12 16 20 25 32 40 50 63 80 100
Ø AB 3,4 3,4 3,4 4,3 4,3 6,4 6,4 8,4 8,4 10,5
AH 13,5 15 16,5 20 23 28,5 32 41,5 49 59,5
AO 4 4 4 5 5 6,5 6,5 8 8 9,
AT 9,5 9,5 9,5 12,5 12,5 16 16 22 25,5 28,5
H 2 2 2 3 3 4,5 4,5 5,5 5,5 6,5
Ø DB 6 6 6 7,5 7,5 10,5 10,5 13,5 13,5 16,5
DG 3,5 3,5 3,5 4,5 4,5 6,5 6,5 8,5 8,5 10,5
TR 25 32 35 41 19 21 27 34 44 56
UL 33 40 43 51 46 56 64 81 95 118
kg 0,02 0,02 0,02 0,04 0,04 0,10 0,11 0,13 0,18 0,48
Piston rod clevis – F
Ø 12 16 20 25 32 & 40 50 63 80 &100
A 12 16 20 25 25 29 35 45
B – – – – – 12 15 20
CE 11 16 20 20 24 26 40 56
Ø CK h11 3 h9 4 5 5 6 8 10 14
… CL 6 8 10 10 12 14 20 27
CM B12 3 4 5 5 6 7 10 14
ER 4,5 6,5 8 8 9,5 11,5 16 21
KF M3 M4 M5 M6 M8 M10 M12 M16
KK M3 M4 M5 M6 M8 M10x1,25 M12x1,25 M16x1,5
KV (A/F) 6 7 8 10 13 12 13 17
KW 2 2 2,5 3 4 5 5 5
LE 5 8 10 10 12 12 20 28
RK 10 11,5 14,5 14,5 17,5 20,5 29 36,5
kg- F 0,01 0,01 0,01 0,01 0,02 0,04 0,09 0,22
kg - Nut 0,01 0,01 0,01 0,01 0,01 – – –
kg - Stud 0,01 0,01 0,01 0,01 0,01 0,02 0,04 0,08
Assembly kit
Ø 12 16 20 25 32 40 50 63 80 100
L 10 10 10 10 10 15 15 20 20 25
SW (A/F) 7 7 7 8 8 13 13 17 17 19
45
Actuators
Clamping cylinders M/50100 Single acting Ø 8 to 63 mm
Enable high thrusts to be achieved in restricted space Neat, clean appearance One-piece body construction
Technical data Medium: Compressed air, filtered and lubricated Operation: Single acting Operating pressure: 2 to 10 bar Operating temperature: -10°C to +70°C Consult our Technical Service for use below +2°C
Strokes: Standard, see table
Materials Piston rod: stainless steel (Austenitic) Body: anodised aluminium Seals: nitrile rubber
Standard models Ø 8 12 20 32 50 63
Piston rod Ø 4 6 10 16 20 20
Port size M5 M5 M5 G1/8 G1/4 G1/4
Standard strokes
Model Non-magnetic M/50108/* M/50112/* M/50120/* M/50132/* M/50150/* M/50163/*
* Insert stroke length in mm from table on right.
Ø
8 12 20 32 50 63
Theoretical forces (N) at 6 bar Outstroke F1 at stroke (mm) 4 5 25 3,4 – 55 5,6 – 165 13,2 – 445 – 25,2 1100 – – 1760 – –
Options selector
10 – 5,4 9,6 22,3 36,3 52,5
Ø 8 12 20 32 50 63
4 º ¬ ¬
5
10
25
º
º º ¬ ¬ º
º º º
Other stroke lengths are not available. ¬ Indicates stocked stroke lengths of standard models highlighted in table on left.
25 – – – 13,7 25,5 41,1
M/501˙˙/˙˙ Strokes (mm) Standard only Cylinder diameters (mm) 8 12 20 32 50 63
46
www.norgren.com/info/en046
Substitute 08 12 20 32 50 63
Clamping cylinders M/50100 Single acting Ø 8 to 63 mm
Standard cylinders M/50108 to M/50112
M/50120 to M/50163
stroke stroke
*Exhaust position, do not obstruct ** Ø 25 and 32 mm without bores
Ø 8 12 20 32 50 63
Ø 8 12 20 32
50 63
A 20 25 40 55 80 90
B 18 20 32 45 65 80
ØC – – 5,3 6,4 8,4 8,4
Standard strokes 4 4 10 4 10 5 10 25 10 25 10 25
D 11 13 20 32 50 62
E 13,5 16 24 32 47,5 50
Y 15 15 23 20 26 26 31 46 30 45 35 50
F 8 9 15 18 25 31
G 5 5 5 10 12 12
ØH 6 6 10 10 11 15
ØJ 3,4 3,4 5,5 5,5 6,6 9
K – – M5 M6 M8 M8
ØL 4 5 10 12 16 16
M 3,2 3,4 5,5 5,5 6,8 9
N M5 M5 M5 G 1/8 G 1/4 G 1/4
O – – – 20 30 30
P 5 4,5 4,5 – – –
SW (A/F) – – 8 10 13 13
T – – 8 14,5 15 15
X – – 2 2,5 3 3
kg 0,02 0,03 0,04 0,10 0,10 0,22 0,25 0,31 0,50 0,60 0,80 1,05
47
Actuators
Clamping cylinders M/50200 Double acting Ø 8 to 63 mm
Enable high thrusts to be achieved in restricted space Neat, clean appearance Double ended piston rod
Technical data Medium: Compressed air, filtered and lubricated Operation: Double acting Operating pressure: 1,5 to 10 bar Operating temperature: -10°C to +70°C Consult our Technical Service for use below +2°C
Strokes: Standard, see table
Materials Piston rod: stainless steel (Austenitic) Body: anodised aluminium Seals: nitrile rubber
48
Standard models Ø 8 12 20 32 50 63
Piston rod Ø 4 5 10 12 16 16
Port size M5 M5 M5 G1/8 G1/4 G1/4
Standard strokes
Model Non-magnetic M/50208/* M/50212/* M/50220/* M/50232/* M/50250/* M/50263/*
* Insert stroke length in mm. Cylinder sizing and speed control see page 6
Options selector
Ø 8 12 20 32 50 63
4 º º º
5
º
10 º º º º º º
25
º º º
Other stroke lengths are not available. ¬ Indicates stocked stroke lengths of standard models highlighted in table on left.
M/502 ˙˙ / ˙˙ Strokes (mm) Standard only Cylinder diameters (mm) 8 12 20 32 50 63
www.norgren.com/info/en048
Substitute 08 12 20 32 50 63
Clamping cylinders M/50200 Double acting Ø 8 to 63 mm
Standard cylinders M/50208 to M/50212
M/50220 to M/50263
** Ø 25 and 32 mm without bores
Ø 8 12 20 32 50 63
Model 50208 50212 50220 50232
50250 50263
A 20 25 40 55 80 90
B 18 20 32 45 65 80
Standard strokes 4 10 4 10 4 10 5 10 25 10 25 10 25
ØC – – 5,3 6,4 8,4 8,4
D 11 13 20 32 50 62
Y 22 28 24 30 25 31 33,5 38,5 53,5 36,5 51,5 41,5 56,5
E 13,5 16 24 32 47,5 50
Z 5 11 5 11 8 14 10 15 30 15 30 15 30
F 8 9 15 18 – –
G 5 5 5 10 12 12
ØH 6 6 10 10 11 15
ØJ 3,4 3,4 5,5 5,5 6,6 9
K – – M5 M6 M8 M8
ØL 4 5 10 12 16 16
M 3,2 3,4 5,5 5,5 6,8 9
N M5 M5 M5 G 1/8 G 1/4 G 1/4
O – – – 20 30 30
SW (A/F) – – 8 10 13 13
T – – 8 14,5 15 15
X – – 2 2,5 3 3
kg 0,03 0,03 0,04 0,05 0,10 0,11 0,25 0,30 0,42 0,60 0,68 0,90 1,16
49
Actuators
ISO/VDMA Profile cylinders PRA/181000,.../M, PRA/183000,.../M Single acting Ø 32 to 100 mm
Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 Profile barrel with concealed tie rods Polyurethane seals ensure efficient low friction operation and long life Switches can be mounted flush with the profile barrel Comprehensive range of standard mountings
Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: PRA/181000: Sprung in, adjustable cushioning PRA/181000/M: Sprung in, magnetic piston, adjustable cushioning PRA/183000: Sprung out, adjustable cushioning PRA/183000/M: Sprung out, magnetic piston, adjustable cushioning Operating pressure: 2 to 10 bar Operating temperature: -20°C to +80°C max.
Standard models Piston rod Ø 12 16 20 20 25 25
Ø 32 40 50 63 80 100
Port size G1/8 G1/4 G1/4 G3/8 G3/8 G1/2
Magnetic Sprung in PRA/181032/M/* PRA/181040/M/* PRA/181050/M/* PRA/181063/M/* PRA/181080/M/* PRA/181100/M/*
Non-magnetic Sprung in PRA/181032/* PRA/181040/* PRA/181050/* PRA/181063/* PRA/181080/* PRA/181100/*
Sprung out PRA/183032/M/* PRA/183040/M/* PRA/183050/M/* PRA/183063/M/* PRA/183080/M/* PRA/183100/M/*
Materials Profile barrel: anodised aluminium End covers: pressure diecast aluminium Piston rod: stainless steel (Martensitic) Piston rod seals: polyurethane Piston seals: polyurethane O-rings: nitrile rubber
Service kit QA/8032/00 QA/8040/00 QA/8050/00 QA/8063/00 QA/8080/00 QA/8100/00
* Insert stroke length in mm.
Ø 32 40 50 63 80 100
PRA/181000/M Theoretical forces (N) at 6 bar F1 Outstroke 392 50 648 60 1043 75 1735 75 2795 130 4492 130
F1 = Return force of spring (N)
PRA/183000/M Theoretical forces (N) at 6 bar F1 Instroke 324 50 528 60 854 75 1546 75 2501 130 4197 130
Standard strokes Ø 32 40 50 63 80 100
25 º º º º º º
50 º º º º º º
80 º º º º º º
100 º º º º º º
Cylinder sizing and speed control see page 6
Options selector P˙A/18˙˙˙˙/˙˙/˙˙˙ Piston rod material Stainless steel (Martensitic) Hard chromium plated Stainless steel (Austenitic)
Substitute R C S
Operation Sprung in Sprung out
Substitute 1 3
Cylinder diameters (mm) 32 40 50 63 80 100
Substitute 032 040 050 063 080 100
Strokes (mm) 250 max. Variants (magnetic piston) Standard Non-rotating piston rod Special wiper/seal Extended piston rod Extended piston rod & special wiper/seal P*A/18****/MU/ ***/ *** /W6/
Consult our Technical Service for use below +2°C
Strokes: Standard: see table Non-standard strokes available (250 mm max.)
Sprung out PRA/183032/* PRA/183040/* PRA/183050/* PRA/183063/* PRA/183080/* PRA/183100/*
Reed Solid state
Model M/50/LSU/*V M/50/EAP/*V
With plug-in cable
M/50/LSU/CP M/50/EAP/CP
Plug-in cable M/P73001/5 (5 m) M/P73001/5 (5 m)
Extension (mm)
Variants (non-magnetic piston) Substitute Standard None Non-rotating piston rod N1 Special wiper/seal W1 Extended piston rod IU Extended piston rod & W5 special wiper/seal P*A/18 **** /IU/ *** / *** /W5/ Extension (mm)
Switches With integral cable
Substitute M N2 W2 MU W6
Note: Disregard option positions not used. For combinations of cylinder variants consult our Technical Service.
Groove cover M/P72725/1000
*Insert cable length – 2, 5 or 10 m. For details see page 198
50
www.norgren.com/info/en050
ISO/VDMA Profile cylinders PRA/181000,.../M, PRA/183000,.../M Single acting Ø 32 to 100 mm
Mountings Ø
A
AK
B, G
C
D
D2
F
FH
L
32 40 50 63 80 100 Ø
QM/8032/35 QM/8032/35 QM/8050/35 QM/8050/35 QM/8080/35 QM/8080/35 R
QM/8025/38 QM/8040/38 QM/8050/38 QM/8050/38 QM/8080/38 QM/8080/38 S
QA/8032/22 QA/8040/22 QA/8050/22 QA/8063/22 QA/8080/22 QA/8100/22 SS
QA/8032/21 QA/8040/21 QA/8050/21 QA/8063/21 QA/8080/21 QA/8100/21 SW
QA/8032/23 QA/8040/23 QA/8050/23 QA/8063/23 QA/8080/23 QA/8100/23 UF
QA/8032/42 QA/8040/42 QA/8050/42 QA/8063/42 QA/8080/42 QA/8100/42 UH
QM/8025/25 QM/8040/25 QM/8050/25 QM/8050/25 QM/8080/25 QM/8080/25 UL
QA/8032/34 QA/8040/34 QA/8050/34 QA/8063/34 QA/8080/34 QA/8100/34 UR
QA/8032/24 QA/8040/24 QA/8050/24 QA/8063/24 QA/8080/24 QA/8100/24 US
QM/8032/26 QM/8040/26 QM/8050/26 QM/8063/26 QM/8080/26 QM/8100/26 Groove key
32 40 50 63 80 100
QA/8032/27 QA/8040/27 QA/8050/27 QA/8063/27 QA/8080/27 QA/8100/27
QA/8032/41 QA/8040/41 QA/8040/41 QA/8063/41 QA/8063/41 QA/8100/41
M/P19931 M/P19932 M/P19933 M/P19934 M/P19935 M/P19936
M/P19493 M/P19494 M/P19495 M/P19496 M/P19497 M/P19498
QM/8025/32 QM/8040/32 QM/8050/32 QM/8050/32 QM/8080/32 QM/8080/32
PQA/182032/40 PQA/182040/40 PQA/182050/40 PQA/182063/40 PQA/182080/40 PQA/182100/40
QA/8032/43 QA/8040/43 QA/8050/43 QA/8063/43 QA/8080/43 QA/8100/43
QA/8032/33 QA/8040/33 QA/8050/33 QA/8063/33 QA/8080/33 QA/8100/33
M/P40310 M/P40311 M/P40312 M/P40313 M/P40314 M/P40315
M/P72816 M/P72816 M/P72816 M/P72816 M/P72816 M/P72816
Please see page 76 for details of mountings.
M
For switches M/50 see page 198.
Standard cylinders PRA/181000,.../M - sprung in
PRA/183000,.../M - sprung out WH + stroke L8 + stroke
Section A-B
Cylinder variants PRA/18100/N1, PRA/183000/N1, PRA/18100/N2, PRA/183000/N2 Cylinders with non rotating piston rod
Model Standard strokes L8 Non-standard strokes L8
181032, 183032 25, 50 80, 100 119 147 250 mm max. 119 + (N * x 28)
181040,183040 25, 50 80, 100 130 158 250 mm max. 130 + (N * x 28)
181050, 183050 25, 50 80, 100 131 159 250 mm max. 131 + (N * x 28)
181063, 183063 25, 50 80, 100 146 174 250 mm max. 146 + (N * x 28)
181080, 183080 25, 50 80, 100 153 181 250 mm max. 153 + (N * x 28)
BH (A/F) 6 6 8 8 19 19 RT M6 M6 M8 M8 M 10 M 10
EE G 1/8 G 1/4 G 1/4 G 3/8 G 3/8 G 1/2 SW1 (A/F) 10 13 16 16 21 21
KK M10x1,25 M12x1,25 M16x1,5 M16x1,5 M20x1,5 M20x1,5 VD 6 6 6 6 6 6
181100, 183100 25, 50 80, 100 163 191 250 mm max. 163 + (N * x 28)
* Stroke Ø 50 mm N = 0; Stroke > 50 mm N = Stroke –1 (round up to integer) 50
Ø 32 40 50 63 80 100 Ø 32 40 50 63 80 100
AM 22 24 32 32 40 40 L9 4 4 5 5 – –
AP 3,5 4,5 6 10 8,5 9 L12 6 6,5 8 8 10 10
Ø B e11 30 35 40 45 45 55 Ø MM h9 12 16 20 20 25 25
Ø BA e11 30 35 40 45 45 55 PL 13 15 18,5 19 19 18
BG 18 18 18 17,5 21,5 21,5 …R 32,5 38 46.5 56,5 72 89
…E 47 53 65 75 95 115 SW (A/F) 10 13 17 17 22 22
G 27,5 32 31 33 33 37 VA 3 3,5 3,5 4 4 4
KV (A/F) 17 19 24 24 30 30 WH 26 30 37 37 46 51
KW 5 6 8 8 10 10 kg at 0 mm 0,51 0,80 1,33 1,80 3,25 4,81
L2 20 22 27 29 33 36 kg per 25 mm 0,06 0,08 0,12 0,13 0,20 0,23
51
Actuators
ISO/VDMA Profile cylinders PRA/182000, PRA/182000/M Double acting Ø 32 to 125 mm
Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals ensure efficient low friction operation and long life Switches can be mounted flush with the profile barrel Comprehensive range of standard mountings
Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: PRA/182000: Adjustable cushioning PRA/182000/M: Magnetic piston, adjustable cushioning Operating pressure: 1 to 16 bar Operating temperature: -20°C to +80°C max. High temperature versions: 150°C max. Consult our Technical Service for use below +2°C
Strokes: Standard: see next page Non-standard strokes available (10 to 3000 mm)
Materials Profile barrel: anodised aluminium End covers: pressure diecast aluminium Piston rod: stainless steel (Martensitic) Piston rod seals: polyurethane Piston seals: polyurethane O-rings: nitrile rubber
Standard models Ø 32 40 50 63 80 100 125
Piston rod Ø 12 16 20 20 25 25 32
Port size G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2
Model (Magnetic) Standard Non-rotating PRA/182032/M/* PRA/182032/N2/* PRA/182040/M/* PRA/182040/N2/* PRA/182050/M/* PRA/182050/N2/* PRA/182063/M/* PRA/182063/N2/* PRA/182080/M/* PRA/182080/N2/* PRA/182100/M/* PRA/182100/N2/* PRA/182125/M/* –
Model (Non-magnetic) Standard Non-rotating PRA/182032/* PRA/182032/N1/* PRA/182040/* PRA/182040/N1/* PRA/182050/* PRA/182050/N1/* PRA/182063/* PRA/182063/N1/* PRA/182080/* PRA/182080/N1/* PRA/182100/* PRA/182100/N1/* PRA/182125/* –
Service kit Standard QA/8032/00 QA/8040/00 QA/8050/00 QA/8063/00 QA/8080/00 QA/8100/00 QA/8125/00
Non-rotating QA/8032/N1/00 QA/8040/N1/00 QA/8050/N1/00 QA/8063/N1/00 QA/8080/N1/00 QA/8100/N1/00 –
*Insert stroke length in mm.
Options selector ˙ P ˙ A / 1 8 2˙ ˙ ˙ /˙ ˙ /˙ ˙ ˙ ˙ Strokes (mm) 3000 max.
Special variants Substitute Heat resistant seals, 150°C max. T Hydraulic H Piston rod material Stainless steel (Martensitic) Hard chromium plated Stainless steel (Austenitic)
Variants (non-magnetic piston) Substitute Standard None Special wiper/seal W1 Low friction X1 Piston rod bellow G Without cushioning W Without cushioning, low friction X3 Double ended piston rod J Double ended piston rod, special wiper/seal W3 Four-position IT Non-rotating piston rod N1 Locking unit L2 Barrel turned at 90° for use with guide blocks QA/8000/61/* IIL Feedback F1 Extended piston rod IU Extended piston rod, special wiper/seal W5 P*A/182***/IU/****/*** /W5/ Extension (mm)
Substitute R C S
Cylinder diameters (mm) Substitute 032, 040, 050, 063, 080, 100, 125 Variants (magnetic piston) Substitute Standard M Special wiper/seal W2 Low friction X2 Piston rod bellow MG Without cushioning MW Without cushioning, low friction X4 Double ended piston rod JM Double ended piston rod & special wiper/seal W4 Four-position MT Non-rotating piston rod N2 Locking unit L4 Barrel turned at 90° MIL for use with guide blocks Extended piston rod MU Extended piston rod & W6 special wiper/seal P*A/182***/MU/****/*** /W6/ Extension (mm)
Note: Disregard option positions not used. For combinations of cylinder variants consult our Technical Service.
Switches With integral cable
Reed Solid state
Model M/50/LSU/*V M/50/EAP/*V
With plug-in cable
M/50/LSU/CP M/50/EAP/CP
Plug-in cable M/P73001/5 (5 m) M/P73001/5 (5 m)
Groove cover M/P72725/1000
*Insert cable length – 2, 5 or 10 m. For details see page 198
52
www.norgren.com/info/en052
ISO/VDMA Profile cylinders PRA/182000, PRA/182000/M Double acting Ø 32 to 125 mm
Standard strokes Ø 32 40 50 63 80 100 125
25 ¬ ¬ ¬ ¬ ¬ ¬ º
50 ¬ ¬ ¬ ¬ ¬ ¬ º
80 ¬ ¬ ¬ ¬ ¬ ¬ º
100 ¬ ¬ ¬ ¬ ¬ ¬ º
125 ¬ ¬ ¬ ¬ ¬ ¬ º
160 ¬ ¬ ¬ ¬ ¬ ¬ º
200 ¬ ¬ ¬ ¬ ¬ ¬ º
250 ¬ ¬ ¬ ¬ ¬ ¬ º
320 º ¬ ¬ ¬ ¬ ¬ º
400 º º º º º º º
500 º º º º º º º
Theoretical forces (N) at 6 bar Outstroke Instroke 482 414 754 633 1178 990 1870 1680 3016 2722 4710 4416 7363 6882
Ø 32 40 50 63 80 100 125
¬ Indicates stocked stroke lengths of standard models highlighted in table.
Cylinder sizing and speed control see page 6
Mountings Ø
32 40 50 63 80 100 125 Ø
32 40 50 63 80 100 125 Ø
32 40 50 63 80 100 125
A
AK
B, G
C
D
D2
F
FH
L
QM/8032/35 QM/8032/35 QM/8050/35 QM/8050/35 QM/8080/35 QM/8080/35 QM/8125/35 M
QM/8025/38 QM/8040/38 QM/8050/38 QM/8050/38 QM/8080/38 QM/8080/38 QM/8125/38 R
QA/8032/22 QA/8040/22 QA/8050/22 QA/8063/22 QA/8080/22 QA/8100/22 QM/8125/22 S
QA/8032/21 QA/8040/21 QA/8050/21 QA/8063/21 QA/8080/21 QA/8100/21 QM/8125/21 SS
QA/8032/23 QA/8040/23 QA/8050/23 QA/8063/23 QA/8080/23 QA/8100/23 QM/8125/23 SW
QA/8032/42 QA/8040/42 QA/8050/42 QA/8063/42 QA/8080/42 QA/8100/42 QA/8125/42 UF
QM/8025/25 QM/8040/25 QM/8050/25 QM/8050/25 QM/8080/25 QM/8080/25 QM/8125/25 UH
QA/8032/34 QA/8040/34 QA/8050/34 QA/8063/34 QA/8080/34 QA/8100/34 QA/8125/34 UL
QA/8032/24 QA/8040/24 QA/8050/24 QA/8063/24 QA/8080/24 QA/8100/24 QM/8125/24 UR
QM/8032/26 QM/8040/26 QM/8050/26 QM/8063/26 QM/8080/26 QM/8100/26 QM/8125/26 US
QA/8032/27 QA/8040/27 QA/8050/27 QA/8063/27 QA/8080/27 QA/8100/27 QM/8125/27
QA/8032/33 QA/8040/33 QA/8050/33 QA/8063/33 QA/8080/33 QA/8100/33 QM/8125/33
M/P40310 M/P40311 M/P40312 M/P40313 M/P40314 M/P40315 M/P71355
QA/8032/41 M/P19931 QA/8040/41 M/P19932 QA/8040/41 M/P19933 QA/8063/41 M/P19934 QA/8063/41 M/P19935 QA/8100/41 M/P19936 QA/8100/41 M/P19937 Guide block* Guide block*
M/P19493 M/P19494 M/P19495 M/P19496 M/P19497 M/P19498 M/P19499 Guide block *
QM/8025/32 PQA/182032/40 QA/8032/43 QM/8040/32 PQA/182040/40 QA/8040/43 QM/8050/32 PQA/182050/40 QA/8050/43 QM/8050/32 PQA/182063/40 QA/8063/43 QM/8080/32 PQA/182080/40 QA/8080/43 QM/8080/32 PQA/182100/40 QA/8100/43 QM/8125/32 PQA/182125/40 QA/8125/43 Locking units Groove key Guide block* (passive)
QA/8032/51/* QA/8040/51/* QA/8050/51/* QA/8063/51/* QA/8080/51/* QA/8100/51/* –
QA/8032/*/81 QA/8040/*/81 QA/8050/*/81 QA/8063/*/81 QA/8080/*/81 QA/80100/*/81 –
QA/8032/*/85 QA/8040/*/85 QA/8050/*/85 QA/8063/*/85 QA/8080/*/85 QA/80100/*/85 –
QA/8032/61/* QA/8040/61/* QA/8050/61/* QA/8063/61/* QA/8080/61/* QA/8100/61/* –
Please see page 76 for details of mountings. *Please see page 70 for details of piston rod guide blocks and page 68 for locking units.
QA/8032/59 QA/8040/59 QA/8050/59 QA/8063/59 QA/8080/59 QA/8100/59 QA/8125/59
M/P72816 M/P72816 M/P72816 M/P72816 M/P72816 M/P72816 For switches M/50 see page 198.
53
Actuators
ISO/VDMA Profile cylinders PRA/182000, PRA/182000/M Double acting Ø 32 to 125 mm
Standard cylinders PRA/182000, PRA/182000/M
Section L8 + stroke
Section
A-B
Cushion screw
Ø 32 40 50 63 80 100 125 Ø 32 40 50 63 80 100 125
54
AM 22 24 32 32 40 40 54 L8 94 105 106 121 128 138 160
AP 3,5 4,5 6 10 8,5 9 10 L9 4 4 5 5 – – –
Ø B e11 30 35 40 45 45 55 60 L12 6 6,5 8 8 10 10 13
Ø BA e11 30 35 40 45 45 55 60 Ø MM h9 12 16 20 20 25 25 32
BG 18 18 18 17,5 21,5 21,5 32 PL 13 15 18,5 19 19 18 22,5
BH (A/F) 6 6 8 8 19 19 24 …R 32,5 38 46,5 56,5 72 89 110
…E 47 53 65 75 95 115 140 RT M6 M6 M8 M8 M 10 M 10 M 12
EE G 1/8 G 1/4 G 1/4 G 3/8 G 3/8 G 1/2 G 1/2 SW (A/F) 10 13 17 17 22 22 27
G 27,5 32 31 33 33 37 46 VA 3 3,5 3,5 4 4 4 6
KK M10 x 1,25 M12 x 1,25 M16 x 1,5 M16 x 1,5 M20 x 1,5 M20 x 1,5 M27 x 2 VD 6 6 6 6 6 6 15,5
KV (A/F) 17 19 24 24 30 30 41 WH 26 30 37 37 46 51 65
KW 5 6 8 8 10 10 13,5 kg at 0 mm 0,51 0,80 1,33 1,80 3,25 4,81 8,00
L2 20 22 27 29 33 36 41 kg per 25 mm 0,06 0,08 0,12 0,13 0,20 0,23 0,33
ISO/VDMA Profile cylinders PRA/182000, PRA/182000/M Double acting Ø 32 to 125 mm
Cylinder variants PRA/182000/J, PRA/182000/JM — Cylinders with double ended piston rod Ø 32 40 50 63 80 100 125
ZM 146 165 180 195 220 240 290
ZM + 2 x stroke
L8 94 105 106 121 128 138 160
L8 + stroke
PRA/182000/N1, PRA/182000/N2 — Cylinders with non-rotating piston rod Ø 32 40 50 63 80 100
SW1 (A/F) 10 13 16 16 21 21
Section
A-B
PRA/182000/IT, PRA/182000/MT – Four-position cylinders Ø 32 40 50 63 80 100 125
L8 94 105 106 121 128 138 160
L 10 247 278 294 325 357 387 462
L 11 7 8 8 9 9 9 12
L10 + stroke 1 + stroke 2 L8 + stroke 1
L8 + stroke 2
55
Actuators
ISO/VDMA Cylinders RA/28000/M, RA/28300/M Single acting Ø 32 to 100 mm
Generally conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 Polyurethane seals ensure efficient low friction operation and long life Comprehensive range of standard mountings Magnet piston models for full control system versatility
Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: RA/28000 Single acting RA/28000/M Single acting with magnetic piston Operating pressure: 2 to 10 bar Operating temperature: -20°C to +80°C max.
Standard models Ø 32 40 50 63 80 100
Piston rod Ø 12 16 20 20 25 25
Port size G1/8 G1/4 G1/4 G3/8 G3/8 G1/2
Magnetic Sprung in RA/28032/M/* RA/28040/M/* RA/28050/M/* RA/28063/M/* RA/28080/M/* RA/28100/M/*
Materials Barrel: anodised aluminium End covers: diecast aluminium Piston rod: stainless steel (Martensitic) Piston & piston rod seals: polyurethane O-rings: nitrile rubber
Service kit QA/8032/00 QA/8040/00 QA/8050/00 QA/8063/00 QA/8080/00 QA/8100/00
Sprung out RA/28332/* RA/28340/* RA/28350/* RA/28363/* RA/28380/* RA/28310/*
* Insert stroke length in mm.
Ø 32 40 50 63 80 100
RA/28000 Theoretical forces (N) at 6 bar F1 Outstroke 392 50 648 60 1043 75 1735 75 2795 130 4492 130
RA/28300 Theoretical forces (N) at 6 bar F1 Instroke 324 50 528 60 854 75 1546 75 2501 130 4197 130
Standard strokes Ø 32 40 50 63 80 100
25 º º º º º º
50 º º º º º º
80 º º º º º º
100 º º º º º º
F1 = Return force of spring (N)
Options selector ˙A/28˙˙˙/˙˙/˙˙˙
Consult our Technical Service for use below +2°C
Strokes: Standard, see table Non-standard strokes up to 250 mm maximum
Non-magnetic Sprung in RA/28332/M/* RA/28340/M/* RA/28350/M/* RA/28363/M/* RA/28380/M/* RA/28310/M/*
Sprung out RA/28032/* RA/28040/* RA/28050/* RA/28063/* RA/28080/* RA/28100/*
Piston rod material Stainless steel (Martensitic) Hard chromium plated Stainless steel (Austenitic)
Substitute R C S
Operation Sprung in Sprung out
Substitute 0 1 3
Cylinder diameters (mm) 32 40 50 63 80 100 (sprung in) 100 (sprung out)
Substitute 32 40 50 63 80 00 10
(Ø 32 to 80 mm) (Ø 100 mm)
Strokes (mm) 250 max. Variants (non-magnetic piston) Substitute Standard None Special wiper/seal W1 Non-rotating piston rod N1 Extended piston rod IU RA/28***/IU/***/*** Extension (mm) Variants (magnetic piston) Standard Special wiper/seal Non-rotating piston rod Extended piston rod RA/28***/MU/***/***
Extension (mm) Note: Disregard option positions not used. For combinations of cylinder variants consult our Technical Service.
Switches With integral cable
Reed Solid state
Model M/50/LSU/*V M/50/EAP/*V
Substitute M W2 N2 MU
With plug-in cable
M/50/LSU/CP M/50/EAP/CP
Plug-in cable M/P73001/5 (5 m) M/P73001/5 (5 m)
*Insert cable length – 2, 5 or 10 m. For details see page 198
56
www.norgren.com/info/en056
ISO/VDMA Cylinders RA/28000/M, RA/28300/M Single acting Ø 32 to 100 mm
Mountings Ø
A
AK
B, G
C
D
D2
F
FH
L
32 40 50 63 80 100 Ø
QM/8032/35 QM/8032/35 QM/8050/35 QM/8050/35 QM/8080/35 QM/8080/35 R
QM/8025/38 QM/8040/38 QM/8050/38 QM/8050/38 QM/8080/38 QM/8080/38 S
QA/8032/22 QA/8040/22 QA/8050/22 QA/8063/22 QA/8080/22 QA/8100/22 SS
QA/8032/21 QA/8040/21 QA/8050/21 QA/8063/21 QA/8080/21 QA/8100/21 SW
QA/8032/23 QA/8040/23 QA/8050/23 QA/8063/23 QA/8080/23 QA/8100/23 UF
QA/8032/42 QA/8040/42 QA/8050/42 QA/8063/42 QA/8080/42 QA/8100/42 UH
QM/8025/25 QM/8040/25 QM/8050/25 QM/8050/25 QM/8080/25 QM/8080/25 UL
QA/8032/34 QA/8040/34 QA/8050/34 QA/8063/34 QA/8080/34 QA/8100/34 UR
QA/8032/24 QA/8040/24 QA/8050/24 QA/8063/24 QA/8080/24 QA/8100/24 US
QM/8032/26 QM/8040/26 QM/8050/26 QM/8063/26 QM/8080/26 QM/8100/26 Switch mounting brackets #
32 40 50 63 80 100
QA/8032/27 QA/8040/27 QA/8050/27 QA/8063/27 QA/8080/27 QA/8100/27
QA/8032/41 QA/8040/41 QA/8040/41 QA/8063/41 QA/8063/41 QA/8100/41
M/P19931 M/P19932 M/P19933 M/P19934 M/P19935 M/P19936
M/P19493 M/P19494 M/P19495 M/P19496 M/P19497 M/P19498
QM/8025/32 QM/8040/32 QM/8050/32 QM/8050/32 QM/8080/32 QM/8080/32
QA/8032/40 QA/8040/40 QA/8050/40 QA/8063/40 QA/8080/40 QA/8100/40
QA/8032/43 QA/8040/43 QA/8050/43 QA/8063/43 QA/8080/43 QA/8100/43
QA/8032/33 QA/8040/33 QA/8050/33 QA/8063/33 QA/8080/33 QA/8100/33
M/P40310 M/P40311 M/P40312 M/P40313 M/P40314 M/P40315
QM/27/2/1 QM/27/2/1 QM/27/2/1 QM/27/2/1 QM/27/2/1 QM/27/2/1
Please see page 76 for details of mountings.
M
# For use with switches M/50, see page 198
Standard cylinders RA/28300, RA/28300/M - sprung out
RA/28000, RA/28000/M - sprung in
stroke
stroke
Cylinder variants RA/28000/N1, RA/28000/N2 – Cylinder with non-rotating piston rod RA/28300/N1, RA/28300/N2 – Cylinder with non-rotating piston rod
Model Standard strokes L8 Non-standard strokes L8
28032, 28332 25, 50 80, 100 119 147 250 mm max. 119 + (N * x 28)
28040, 28340 25, 50 80, 100 130 158 250 mm max. 130 + (N * x 28)
28050, 28350 25, 50 80, 100 131 159 250 mm max. 131 + (N * x 28)
28063, 28363 25, 50 80, 100 146 174 250 mm max. 146 + (N * x 28)
BH (A/F) 6 6 8 8 19 19 RT M6 M6 M8 M8 M 10 M 10
EE G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 SW1 (A/F) 10 13 16 16 21 21
28080, 28380 25, 50 80, 100 153 181 250 mm max. 153 + (N * x 28)
28100, 28310 25, 50 80, 100 163 191 250 mm max. 163 + (N * x 28)
* Stroke < 50 mm N = 0, Stroke > 50 mm N = Stroke –1 (round up to integer) 50
Ø 32 40 50 63 80 100 Ø 32 40 50 63 80 100
AM 22 24 32 32 40 40 L9 4 4 5 5 0 0
AP 3,5 4,5 6 10 8,5 9 L12 6 6,5 8 8 10 10
Ø B e11 30 35 40 45 45 55 Ø MM h9 12 16 20 20 25 25
BA e11 30 35 40 45 45 55 PL 13 15 18,5 19 19 18
BG 18 18 18 17,5 21,5 21,5 …R 32,5 38 46,5 56,5 72 89
…E 47 53 65 75 95 115 SW (A/F) 10 13 17 17 22 22
G 27,5 32 31 33 33 37 VA 3 3,5 3,5 4 4 4
KK M 10 x 1,25 M 12 x 1,25 M 16 x 1,5 M 16 x 1,5 M 20 x 1,5 M 20 x 1,5 VD 6 6 6 6 6 6
KV (A/F) 17 19 24 24 30 30 WH 26 30 37 37 46 51
KW L2 5 20 6 22 8 27 8 29 10 33 10 36 kg at 0 mm kg per 25 mm 0,71 0,09 1,09 0,11 1,77 0,19 2,34 0,22 3,93 0,31 5,63 0,35
57