Custom Drives
Custom
Custom Drives
67
Custom Drives
Your Idea - Our Drive From concept via design and engineering, to in-house prototyping with test lab, through to mass production, Framo creates cost-optimized, high-quality solutions according to the customer's requirements. The most modern expert systems are used in design, production and quality control: computation programs to optimize gearing parts and gear units, computer-supported production data, as well as process control with computer-controlled evaluation (SPC).
Application Countless applications have already been realized using our drives. We are proud of having designed and produced drive solutions for many well-known customers. The range of products extends from worm gears, spur gears and planetary gear units to complex drive systems.
Test Prototypes Engineering Design Specification Specification You specify the parameters according to which your drive is designed. Pflichtenheft
Kv =
Cv12 C' (fPe2 - Ya ) + CV4 + 1 KA Ft b
lm = beff
Übersetzung: 25:1 Drehmoment: 55Nm Abtriebsgeschwindigkeit: 60 min-1 max. 125 !
Design Your specifications and our know-how flow into the design of a technically and economically optimal solution to your drive requirement.
68
Custom Drives
Assembly Assembly occurs as soon as the individual parts have successfully passed the quality control test criteria. Our customer receive delivered the fully preassembled drive unit ready for installation.
Production At Framo drive component production is carried out using the most modern machine tools. Consequently, well-engineered products are realized under competitive conditions.
Application Assembly Production
Test Theoretical and practical stress tests of prototypes and production model gear units are a matter of course. The most modern testing techniques ensure optimal adaptation to the subsequent application.
Prototypes Prototypes serve to test the desired characteristics in a practical way. With your assistance, application issues and principles of operation can be outlined.
Custom
Engineering Detailed engineering is carried out with the aid of the most modern CAD and computing software.
69
Custom Drives Sample Applications Stair lift The drive consists of a main drive with disk armature motor and worm / planetary gear and a swivel drive with permanentmagnet motor and spur gear-worm gear unit for the horizontal positioning of the seat. In addition, the drive is equipped with a positioning control and a speed-dependent safety catch. Technical data: Motor speed: Transmission ratio: Output speed: Output torque:
4,000 min-1 196,5:1 20 min-1 200 Nm
Two-component mixer This drive is used in the field of dental technology. At the push of a button, it automatically doses and mixes two viscous, paste-like substances in the correct proportion and in the desired quantity. The challenge for Framo consists of engineering a successor model that should be quieter and smaller but at the same time doubly as powerful as it predecessor.
Adjustment unit for tractors The adjustment unit evaluates signals from an electronic controller on the tractor and adjusts the desired gear ratio on the tractor by means of the integrated electrical motor with planetary gear via the adjustment unit's output shaft. Electronic system, electrical motor, planetary gear, bevel gear unit and incremental position encoder form a compact unit. The incremental position encoder sends a high pulse count per revolution along with the concurrent processing of the signal and indicates the position of the output shaft via a reference output of its own. The integrated electronic system transfers the evaluation and feedback to the tractor. Technical data: Protective system: Temperature range: Resistant to corrosion Gear ratio: Backlash: Torque:
70
IP67 -25°C up to 100°C 190:1 < 10 angular minutes 2 up to 15 Nm
Custom Drives Sample Applications Worm gear unit with eccentric shaft for wood working machines For the production of wooden sheets for cabinetry, combination machines for formatting and gluing on borders are used, e.g., in the fabrication of doors, wall and ceiling panels. In doing so, the tools on the machines are very precisely guided and worked with great accuracy. This accuracy is achieved by the use of worm gear units among other things. It serves to adjust tools and can be adjusted by means of an eccentric shaft virtually backlash-free. Thus it contributes to the high-grade quality of the finished product. Framo produces this worm gear unit in three frame sizes. Technical data: Center distance of axes: 26.5 - 95 mm Transmission ratio: 12:1, 24:1, 80:1
Worm gear units for motorized motion rails Two extremely low-backlash worm gear units are integrated in this shoulder motion rail. A gear unit raises and lowers the arm of the patient; the second gear unit is responsible for the rotational movement of the shoulder. Thus a movement appropriate to the natural motion pattern of the shoulder is produced. The greatest accuracy is called for with respect to the postoperative movement of the shoulder, as travel proceeds via top dead center. Too great a backlash here would be painful for the patient. In order to preclude this, the gear units are produced with a total backlash of less than 1.5°.
Spindle unit for trailer manœuvering aid
Custom
A manœuvering aid enables a trailer to manœuver without towing vehicle in the narrowest of parking spaces. The manœuvering aid consists of a rotary drive that sets the tires in motion and a spindle drive that moves the manœuvering aid. The spindle unit swivels the entire manœuvering unit onto the trailer's tires. In so doing, the force of the spindle plays a decisive role. Two of these manœuvering aids are employed per trailer.
71
Custom Drives Some other examples of custom drives
Spur gear unit
Synchronous belt gear unit
Worm gear unit
Servo-planetary gear unit
Chain gear unit
Spur gear unit
72
