Unlimited Possibilities UnlimitedProduct ProductDesign Designand andEngineering Engineering Possibilities Sealed Air polyethylene foams, originally developed for protective packaging applications, also exhibit outstanding physical properties that make them ideal for a broad range of products in today’s active, value-conscious marketplace: •

Strong—excellent tensile and tear properties

•

Flexible—bends without breaks or tears

•

Very Resilient—recovers from compressions and impacts

•

Wide range of designer colors and densities

•

Non-dusting Non --dusting

•

Non-toxic Non --toxicand andodorless odorless

•

Moisture and chemical resistant

•

Maintains dimensional stability over a wide emperature temperaturerange range

•

Buoyant – excellent for recreational activities

•

Easily laminated – bonds to itself and a variety of substrates

Sporting Goods, Goods,Athletic AthleticEquipment Equipment and Toys Sporting and Toys Outstanding buoyancy, resiliency and durability make Sealed Air polyethylene foams a natural choice for water sport applications, protective athletic equipment, games and accessories: •

Personal flotation devices,(i.e., life jackets)

•

Surf and body board construction

•

Floating pool toys and furniture

•

Spas and hot tubs

•

Athletic equipment and wall padding

•

Aerobic steps

•

Exercise and camping mats

•

Golf bag and backpack inserts

•

Archery and dart targets

•

Car-top carriers and racks

•

Toys of all kinds

Construction ConstructionEngineering EngineeringApplications Applications Superior insulating and barrier characteristics, along with easy on-site fabrication, make Sealed Air polyethylene foam products ideal for a wide range of construction applications: •

Flooring underlayment

•

Concrete curing blankets

•

Pipe insulation

•

Sill plate gaskets

•

Separation and pressure relief joints foundations, roofs, floors and concrete pavement

•

Closure strips and gaskets

•

Pool liners and covers

•

Buried cable protection

•

Underground oil and gas pipeline protection

•

Tunnel lining

•

Acoustical insulation

•

Vibration isolation for heavy equipment installations

Innovations Leader. InnovationsininFoam Foamfrom fromthe theGlobal Global Leader. Sealed Air Corporation is a major international manufacturer of innovative protective packaging materials and systems

Medium Density: Ethafoam® E, 180, 220 and Waveplank, thick and single-layer extruded

Light Density: Light density Stratocell® E foam provides the most cost-efficient cushioning

foams are widely used for their excellent dynamic cushioning performance in end-caps, corner

protection available for today’s lighter weight products. Its exceptionally high strength-to-weight

including：Ethafoam®®, Stratocell®®, Stratocell®® Plus and Cellu-Cushion®®, closed-cell polyethylene foam products.

pads and load separators. Their ability to absorb repeated shocks makes them ideal for

ratio reduces cube and costs by providing superior protection, using less material than many

cushioning, blocking and bracing of valuable or delicate products.

alternative packaging methods.

The polyethylene product portfolio is manufactured to meet the highest quality and environmental standards and is ideal for a wide range of packaging and non-packaging applications.

Sealed Sealed Air Air Polyethylene PolyethyleneFoams: Foams: Resilient, lightweight and cost-efficient, with superior physical properties necessary for cushioning barrier applications.

E

1.5″, 1.97″, 2″ (41mm, 50mm, 54mm)

24″ (610mm)

108″ (2740mm)

180

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm, 1220mm)

108″ (2740mm)

220

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm,1220mm)

108″ (2740mm)

Waveplank

2″ (54mm)

23″ (585mm)

88″ (2235mm)

Industry’s largest selection of densities and designer colors.

strength for high load bearing applications. They are used in industrial cushioning, OEM,

•

Available for worldwide delivery in a wide range of sheet, extruded and laminated plank configurations.

automotive and construction markets requiring added compressive strength.

•

Easily converted using traditional fabrication equipment.

•

Special formulations are available that provide static, fire retardant and UV protection.

•

CFC and HCFC free.

Innovative InnovativeFoam FoamPackaging PackagingSolutions SolutionsThrough Through Creative Creative Design Designand andFabrication Fabrication

24″ (610mm)

108″ (2740mm)

600

2″ (54mm)

24″ (610mm)

108″ (2740mm)

900

2″ (54mm)

24″ (610mm)

108″ (2740mm)

Sealed Air polyethylene foams are designed to meet a broad range of protective packaging and material handling requirements, from

Sealed Air has multiple packaging design and development centers around the world. They review and analyze proposed designs, develop new ones, test existing packs and recommend the best way to maximize the protective qualities of Sealed Air polyethylene foams. Sealed Air provides package and material testing in accordance with ISTA, ASTM, government or corporate standards.

Cushioning CushioningCurves Curves Sealed Air polyethylene foam Cushioning Curves provide different thickness and drop heights to satisfy various design requirements. And testing factors such as design, fabrication technique, type of outer container, and Package history(e.g. storage conditions) may influence package performance.

Comprehensive shock and vibration cushioning performance data is available on all Sealed Air polyethylene foams.

many alternative packaging materials. High Recycled Content Polyethylene Foam

Figure 2 – Drop height = 18 in – Multiple drop

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

150

100

50

100 1 in 1.5 in 2 in 3 in 4 in

50

2

4

6

8

10

0

12

0

1

2

3

STATIC LOAD (PSI)

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

6

7

8

Figure 4 – Drop height = 30 in – Multiple drop

50

100 1 in 1.5 in 2 in 3 in 4 in

50

0

1

2

3

4

5

0

6

0

0.5

1

1.5

STATIC LOAD (PSI)

2

2.5

3

3.5

4

4.5

5

STATIC LOAD (PSI)

Figure 5 – Drop height = 36 in – Multiple drop

Figure 6 – Drop height = 42 in – Multiple drop

150

1 in 1.5 in 2 in 3 in 4 in

50

G-VALUE (G)

150

100

0

5

150

100

0

4

STATIC LOAD (PSI)

Figure 3 – Drop height = 24 in – Multiple drop 150

G-VALUE (G)

*Typical values, not product specL¿cation limits.

Cushion Curves

*

Figure 1 – Drop height = 12 in – Multiple drop 150

0

100 1 in 1.5 in 2 in 3 in 4 in

50

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

48″ (1220mm)

108″ (2740mm)

H

1/2″ to 4″ (12.7mm to 101.6mm)

48″ (1220mm)

108″ (2740mm)

Cellu-Cushion® foam backing.

toughness, cushioning and smoothness, toughness, cushioning Ethafoam® Synergy® polyethylene foam offers excellent softness, abrasion properties at a low density. and abrasion properties at a foam low foam density.

E Plus

2″ (54mm)

1/8″ (3.2mm)Cellu-Cushion 1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated

S Plus

1″ to 2″ (28.6mm to 54mm)

1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated 1/8″ (3.2mm)Cellu-Cushion

® to natural Stratocell foam ® foam Stratocell

® foam ® foam Stratocell to natural Stratocell

*Available in 1/2″ increments.

1000

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P2

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P3

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P4

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

Medium Density: Cellu-Cushion® medium density, closed-cell sheet foams are typically used in surface protection and light cushioning packaging applications.

E

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

S

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

H

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

Ethafoam® HRC polyethylene foam recycled content is a minimum of 65%, we are benefiting

Heavy Density: The compressive strength and smooth surface of Cellu-Cushion® heavy

the environment by reducing the amount of material that enters the waste stream.

density foams are ideal for use in sporting goods, exercise equipment, toys, OEM, automotive and construction applications.

Ethafoam HRC

0

1/2″ to 4″ (12.7mm to 101.6mm)

plank, plus the added strength and durability of either a 3.5 mil. film or 1/8″ high-density

Explore Explore Sealed SealedAir AirPolyethylene PolyethyleneFoam FoamProducts: Products: High Performance Cushioning – provides the same or better protection using less foam than

S

Stratocell® Plus foam laminates provide all the proven benefits of our Stratocell® laminated

economical, lightweight protection to heavy-duty industrial cushioning. They are clean, non-abrasive and offer package designers and fabricators a variety of creative opportunities.

108″ (2740mm)

shock that fabricates easily and heat-bonds without skiving.

•

1.97″, 2″, 3″ (50mm, 54mm, 79mm)

48″ (1220mm)

Medium Density: Stratocell® S and H foams provide cushioning protection against repeated

Heavy Density: Ethafoam® 400, 600 and 900 foams provide heavy duty cushioning and

400

1″ to 3″ (25.4mm to 76.2mm)

E

3.5

4

0

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

•s Reduced ReducedPackaging PackagingCosts Costs––less lessfoam foamresults resultsininsmaller smaller packs, reducing material and shipping costs, as well as handling and storage expenses. •s Excellent Excellent Material MaterialYield Yield––Wide Widewidths widthsminimize minimizescrap scrap generated during fabrication, further reducing material

S

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm)

108″ (2740mm)

H

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm )

108″ (2740mm)

5/32″ (3mm)

48″ (1220mm)

600′ (183m)

6.0

1/8″ (3.2mm)

51″ (1295mm)

500′ (152m)

*Note:Additional Additionalthickness, thicknesses, densities, colors custom formulations be special ordered to meet virtually Note: densities, colors andand custom formulations cancan be special ordered to meet virtually anyany application requirements. Contact your Sealed Air consultative sales representative for details.

costs and less waste for disposal. •s Very Very Resilient Resilient –– quick quick recovery recovery from from multiple multiple compressions and impacts make ideal for use itinideal returnable compressions and itimpacts make for usematerial in

Flotation Grade: Available in flotation grades that meet UL-1191 and ULC (Canada) safety specifications, used in personal flotation devices.

handling returnablesystems. material handling systems.

3.5

•s Enhanced EnhancedPackaging PackagingAesthetics Aesthetics––clean, clean,attractive attractive appearance enhances product and package image.

4.0

Reduce

Develop designs to maintain performance, while reducing the amount of material that would otherwise enter the waste stream.

Reuse

Through our Plastic Recycling Program, we select and recycle spent plastic materials that are classified as pre-consumer, post-consumer or would otherwise enter the waste stream.

Recycle

Promote consumer awareness of recycling PE foam through RecyclePEFoam.com. Visit www.recyclepefoam.com to join the network or receive more information.

1.4

1/4″, 5/16″, 1/2″ (7mm, 7.2mm, 11mm)

48″ (1220mm)

250′, 225′, 125′ (76m, 68m, 38m)

1.7

5mm, 3/8″(8.9mm)

48″ (1220mm)

250′, 200′ (76m, 61m)

Innovations Leader. InnovationsininFoam Foamfrom fromthe theGlobal Global Leader. Sealed Air Corporation is a major international manufacturer of innovative protective packaging materials and systems

Medium Density: Ethafoam® E, 180, 220 and Waveplank, thick and single-layer extruded

Light Density: Light density Stratocell® E foam provides the most cost-efficient cushioning

foams are widely used for their excellent dynamic cushioning performance in end-caps, corner

protection available for today’s lighter weight products. Its exceptionally high strength-to-weight

including：Ethafoam®®, Stratocell®®, Stratocell®® Plus and Cellu-Cushion®®, closed-cell polyethylene foam products.

pads and load separators. Their ability to absorb repeated shocks makes them ideal for

ratio reduces cube and costs by providing superior protection, using less material than many

cushioning, blocking and bracing of valuable or delicate products.

alternative packaging methods.

The polyethylene product portfolio is manufactured to meet the highest quality and environmental standards and is ideal for a wide range of packaging and non-packaging applications.

Sealed Sealed Air Air Polyethylene PolyethyleneFoams: Foams: Resilient, lightweight and cost-efficient, with superior physical properties necessary for cushioning barrier applications.

E

1.5″, 1.97″, 2″ (41mm, 50mm, 54mm)

24″ (610mm)

108″ (2740mm)

180

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm, 1220mm)

108″ (2740mm)

220

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm,1220mm)

108″ (2740mm)

Waveplank

2″ (54mm)

23″ (585mm)

88″ (2235mm)

Industry’s largest selection of densities and designer colors.

strength for high load bearing applications. They are used in industrial cushioning, OEM,

•

Available for worldwide delivery in a wide range of sheet, extruded and laminated plank configurations.

automotive and construction markets requiring added compressive strength.

•

Easily converted using traditional fabrication equipment.

•

Special formulations are available that provide static, fire retardant and UV protection.

•

CFC and HCFC free.

Innovative InnovativeFoam FoamPackaging PackagingSolutions SolutionsThrough Through Creative Creative Design Designand andFabrication Fabrication

24″ (610mm)

108″ (2740mm)

600

2″ (54mm)

24″ (610mm)

108″ (2740mm)

900

2″ (54mm)

24″ (610mm)

108″ (2740mm)

Sealed Air polyethylene foams are designed to meet a broad range of protective packaging and material handling requirements, from

Sealed Air has multiple packaging design and development centers around the world. They review and analyze proposed designs, develop new ones, test existing packs and recommend the best way to maximize the protective qualities of Sealed Air polyethylene foams. Sealed Air provides package and material testing in accordance with ISTA, ASTM, government or corporate standards.

Cushioning CushioningCurves Curves Sealed Air polyethylene foam Cushioning Curves provide different thickness and drop heights to satisfy various design requirements. And testing factors such as design, fabrication technique, type of outer container, and Package history(e.g. storage conditions) may influence package performance.

Comprehensive shock and vibration cushioning performance data is available on all Sealed Air polyethylene foams.

many alternative packaging materials. High Recycled Content Polyethylene Foam

Figure 2 – Drop height = 18 in – Multiple drop

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

150

100

50

100 1 in 1.5 in 2 in 3 in 4 in

50

2

4

6

8

10

0

12

0

1

2

3

STATIC LOAD (PSI)

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

6

7

8

Figure 4 – Drop height = 30 in – Multiple drop

50

100 1 in 1.5 in 2 in 3 in 4 in

50

0

1

2

3

4

5

0

6

0

0.5

1

1.5

STATIC LOAD (PSI)

2

2.5

3

3.5

4

4.5

5

STATIC LOAD (PSI)

Figure 5 – Drop height = 36 in – Multiple drop

Figure 6 – Drop height = 42 in – Multiple drop

150

1 in 1.5 in 2 in 3 in 4 in

50

G-VALUE (G)

150

100

0

5

150

100

0

4

STATIC LOAD (PSI)

Figure 3 – Drop height = 24 in – Multiple drop 150

G-VALUE (G)

*Typical values, not product specL¿cation limits.

Cushion Curves

*

Figure 1 – Drop height = 12 in – Multiple drop 150

0

100 1 in 1.5 in 2 in 3 in 4 in

50

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

48″ (1220mm)

108″ (2740mm)

H

1/2″ to 4″ (12.7mm to 101.6mm)

48″ (1220mm)

108″ (2740mm)

Cellu-Cushion® foam backing.

toughness, cushioning and smoothness, toughness, cushioning Ethafoam® Synergy® polyethylene foam offers excellent softness, abrasion properties at a low density. and abrasion properties at a foam low foam density.

E Plus

2″ (54mm)

1/8″ (3.2mm)Cellu-Cushion 1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated

S Plus

1″ to 2″ (28.6mm to 54mm)

1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated 1/8″ (3.2mm)Cellu-Cushion

® to natural Stratocell foam ® foam Stratocell

® foam ® foam Stratocell to natural Stratocell

*Available in 1/2″ increments.

1000

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P2

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P3

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P4

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

Medium Density: Cellu-Cushion® medium density, closed-cell sheet foams are typically used in surface protection and light cushioning packaging applications.

E

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

S

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

H

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

Ethafoam® HRC polyethylene foam recycled content is a minimum of 65%, we are benefiting

Heavy Density: The compressive strength and smooth surface of Cellu-Cushion® heavy

the environment by reducing the amount of material that enters the waste stream.

density foams are ideal for use in sporting goods, exercise equipment, toys, OEM, automotive and construction applications.

Ethafoam HRC

0

1/2″ to 4″ (12.7mm to 101.6mm)

plank, plus the added strength and durability of either a 3.5 mil. film or 1/8″ high-density

Explore Explore Sealed SealedAir AirPolyethylene PolyethyleneFoam FoamProducts: Products: High Performance Cushioning – provides the same or better protection using less foam than

S

Stratocell® Plus foam laminates provide all the proven benefits of our Stratocell® laminated

economical, lightweight protection to heavy-duty industrial cushioning. They are clean, non-abrasive and offer package designers and fabricators a variety of creative opportunities.

108″ (2740mm)

shock that fabricates easily and heat-bonds without skiving.

•

1.97″, 2″, 3″ (50mm, 54mm, 79mm)

48″ (1220mm)

Medium Density: Stratocell® S and H foams provide cushioning protection against repeated

Heavy Density: Ethafoam® 400, 600 and 900 foams provide heavy duty cushioning and

400

1″ to 3″ (25.4mm to 76.2mm)

E

3.5

4

0

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

•s Reduced ReducedPackaging PackagingCosts Costs––less lessfoam foamresults resultsininsmaller smaller packs, reducing material and shipping costs, as well as handling and storage expenses. •s Excellent Excellent Material MaterialYield Yield––Wide Widewidths widthsminimize minimizescrap scrap generated during fabrication, further reducing material

S

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm)

108″ (2740mm)

H

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm )

108″ (2740mm)

5/32″ (3mm)

48″ (1220mm)

600′ (183m)

6.0

1/8″ (3.2mm)

51″ (1295mm)

500′ (152m)

*Note:Additional Additionalthickness, thicknesses, densities, colors custom formulations be special ordered to meet virtually Note: densities, colors andand custom formulations cancan be special ordered to meet virtually anyany application requirements. Contact your Sealed Air consultative sales representative for details.

costs and less waste for disposal. •s Very Very Resilient Resilient –– quick quick recovery recovery from from multiple multiple compressions and impacts make ideal for use itinideal returnable compressions and itimpacts make for usematerial in

Flotation Grade: Available in flotation grades that meet UL-1191 and ULC (Canada) safety specifications, used in personal flotation devices.

handling returnablesystems. material handling systems.

3.5

•s Enhanced EnhancedPackaging PackagingAesthetics Aesthetics––clean, clean,attractive attractive appearance enhances product and package image.

4.0

Reduce

Develop designs to maintain performance, while reducing the amount of material that would otherwise enter the waste stream.

Reuse

Through our Plastic Recycling Program, we select and recycle spent plastic materials that are classified as pre-consumer, post-consumer or would otherwise enter the waste stream.

Recycle

Promote consumer awareness of recycling PE foam through RecyclePEFoam.com. Visit www.recyclepefoam.com to join the network or receive more information.

1.4

1/4″, 5/16″, 1/2″ (7mm, 7.2mm, 11mm)

48″ (1220mm)

250′, 225′, 125′ (76m, 68m, 38m)

1.7

5mm, 3/8″(8.9mm)

48″ (1220mm)

250′, 200′ (76m, 61m)

Innovations Leader. InnovationsininFoam Foamfrom fromthe theGlobal Global Leader. Sealed Air Corporation is a major international manufacturer of innovative protective packaging materials and systems

Medium Density: Ethafoam® E, 180, 220 and Waveplank, thick and single-layer extruded

Light Density: Light density Stratocell® E foam provides the most cost-efficient cushioning

foams are widely used for their excellent dynamic cushioning performance in end-caps, corner

protection available for today’s lighter weight products. Its exceptionally high strength-to-weight

including：Ethafoam®®, Stratocell®®, Stratocell®® Plus and Cellu-Cushion®®, closed-cell polyethylene foam products.

pads and load separators. Their ability to absorb repeated shocks makes them ideal for

ratio reduces cube and costs by providing superior protection, using less material than many

cushioning, blocking and bracing of valuable or delicate products.

alternative packaging methods.

The polyethylene product portfolio is manufactured to meet the highest quality and environmental standards and is ideal for a wide range of packaging and non-packaging applications.

Sealed Sealed Air Air Polyethylene PolyethyleneFoams: Foams: Resilient, lightweight and cost-efficient, with superior physical properties necessary for cushioning barrier applications.

E

1.5″, 1.97″, 2″ (41mm, 50mm, 54mm)

24″ (610mm)

108″ (2740mm)

180

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm, 1220mm)

108″ (2740mm)

220

1.5″, 1.97″, 2″, 2.5″, 3″ (41mm, 50mm, 54mm, 66.5mm, 79mm)

24″, 48″ (610mm,1220mm)

108″ (2740mm)

Waveplank

2″ (54mm)

23″ (585mm)

88″ (2235mm)

Industry’s largest selection of densities and designer colors.

strength for high load bearing applications. They are used in industrial cushioning, OEM,

•

Available for worldwide delivery in a wide range of sheet, extruded and laminated plank configurations.

automotive and construction markets requiring added compressive strength.

•

Easily converted using traditional fabrication equipment.

•

Special formulations are available that provide static, fire retardant and UV protection.

•

CFC and HCFC free.

Innovative InnovativeFoam FoamPackaging PackagingSolutions SolutionsThrough Through Creative Creative Design Designand andFabrication Fabrication

24″ (610mm)

108″ (2740mm)

600

2″ (54mm)

24″ (610mm)

108″ (2740mm)

900

2″ (54mm)

24″ (610mm)

108″ (2740mm)

Sealed Air polyethylene foams are designed to meet a broad range of protective packaging and material handling requirements, from

Sealed Air has multiple packaging design and development centers around the world. They review and analyze proposed designs, develop new ones, test existing packs and recommend the best way to maximize the protective qualities of Sealed Air polyethylene foams. Sealed Air provides package and material testing in accordance with ISTA, ASTM, government or corporate standards.

Cushioning CushioningCurves Curves Sealed Air polyethylene foam Cushioning Curves provide different thickness and drop heights to satisfy various design requirements. And testing factors such as design, fabrication technique, type of outer container, and Package history(e.g. storage conditions) may influence package performance.

Comprehensive shock and vibration cushioning performance data is available on all Sealed Air polyethylene foams.

many alternative packaging materials. High Recycled Content Polyethylene Foam

Figure 2 – Drop height = 18 in – Multiple drop

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

150

100

50

100 1 in 1.5 in 2 in 3 in 4 in

50

2

4

6

8

10

0

12

0

1

2

3

STATIC LOAD (PSI)

1 in 1.5 in 2 in 3 in 4 in

G-VALUE (G)

G-VALUE (G)

6

7

8

Figure 4 – Drop height = 30 in – Multiple drop

50

100 1 in 1.5 in 2 in 3 in 4 in

50

0

1

2

3

4

5

0

6

0

0.5

1

1.5

STATIC LOAD (PSI)

2

2.5

3

3.5

4

4.5

5

STATIC LOAD (PSI)

Figure 5 – Drop height = 36 in – Multiple drop

Figure 6 – Drop height = 42 in – Multiple drop

150

1 in 1.5 in 2 in 3 in 4 in

50

G-VALUE (G)

150

100

0

5

150

100

0

4

STATIC LOAD (PSI)

Figure 3 – Drop height = 24 in – Multiple drop 150

G-VALUE (G)

*Typical values, not product specL¿cation limits.

Cushion Curves

*

Figure 1 – Drop height = 12 in – Multiple drop 150

0

100 1 in 1.5 in 2 in 3 in 4 in

50

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

48″ (1220mm)

108″ (2740mm)

H

1/2″ to 4″ (12.7mm to 101.6mm)

48″ (1220mm)

108″ (2740mm)

Cellu-Cushion® foam backing.

toughness, cushioning and smoothness, toughness, cushioning Ethafoam® Synergy® polyethylene foam offers excellent softness, abrasion properties at a low density. and abrasion properties at a foam low foam density.

E Plus

2″ (54mm)

1/8″ (3.2mm)Cellu-Cushion 1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated

S Plus

1″ to 2″ (28.6mm to 54mm)

1/8″(3.2mm) Cellu-Cushion® polyethylene foam laminated 1/8″ (3.2mm)Cellu-Cushion

® to natural Stratocell foam ® foam Stratocell

® foam ® foam Stratocell to natural Stratocell

*Available in 1/2″ increments.

1000

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P2

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P3

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

P4

1.97″ (50mm)

24″ (610mm)

108″ (2740mm)

Medium Density: Cellu-Cushion® medium density, closed-cell sheet foams are typically used in surface protection and light cushioning packaging applications.

E

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

S

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

H

1/2″ (12.7mm)

51″ (1295mm)

500′ (152m)

Ethafoam® HRC polyethylene foam recycled content is a minimum of 65%, we are benefiting

Heavy Density: The compressive strength and smooth surface of Cellu-Cushion® heavy

the environment by reducing the amount of material that enters the waste stream.

density foams are ideal for use in sporting goods, exercise equipment, toys, OEM, automotive and construction applications.

Ethafoam HRC

0

1/2″ to 4″ (12.7mm to 101.6mm)

plank, plus the added strength and durability of either a 3.5 mil. film or 1/8″ high-density

Explore Explore Sealed SealedAir AirPolyethylene PolyethyleneFoam FoamProducts: Products: High Performance Cushioning – provides the same or better protection using less foam than

S

Stratocell® Plus foam laminates provide all the proven benefits of our Stratocell® laminated

economical, lightweight protection to heavy-duty industrial cushioning. They are clean, non-abrasive and offer package designers and fabricators a variety of creative opportunities.

108″ (2740mm)

shock that fabricates easily and heat-bonds without skiving.

•

1.97″, 2″, 3″ (50mm, 54mm, 79mm)

48″ (1220mm)

Medium Density: Stratocell® S and H foams provide cushioning protection against repeated

Heavy Density: Ethafoam® 400, 600 and 900 foams provide heavy duty cushioning and

400

1″ to 3″ (25.4mm to 76.2mm)

E

3.5

4

0

0

0.5

1

1.5

2

2.5

STATIC LOAD (PSI)

3

•s Reduced ReducedPackaging PackagingCosts Costs––less lessfoam foamresults resultsininsmaller smaller packs, reducing material and shipping costs, as well as handling and storage expenses. •s Excellent Excellent Material MaterialYield Yield––Wide Widewidths widthsminimize minimizescrap scrap generated during fabrication, further reducing material

S

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm)

108″ (2740mm)

H

1.5″, 1.97″, 2.25″ (40mm, 50mm, 65mm)

24″ (610mm )

108″ (2740mm)

5/32″ (3mm)

48″ (1220mm)

600′ (183m)

6.0

1/8″ (3.2mm)

51″ (1295mm)

500′ (152m)

*Note:Additional Additionalthickness, thicknesses, densities, colors custom formulations be special ordered to meet virtually Note: densities, colors andand custom formulations cancan be special ordered to meet virtually anyany application requirements. Contact your Sealed Air consultative sales representative for details.

costs and less waste for disposal. •s Very Very Resilient Resilient –– quick quick recovery recovery from from multiple multiple compressions and impacts make ideal for use itinideal returnable compressions and itimpacts make for usematerial in

Flotation Grade: Available in flotation grades that meet UL-1191 and ULC (Canada) safety specifications, used in personal flotation devices.

handling returnablesystems. material handling systems.

3.5

•s Enhanced EnhancedPackaging PackagingAesthetics Aesthetics––clean, clean,attractive attractive appearance enhances product and package image.

4.0

Reduce

Develop designs to maintain performance, while reducing the amount of material that would otherwise enter the waste stream.

Reuse

Through our Plastic Recycling Program, we select and recycle spent plastic materials that are classified as pre-consumer, post-consumer or would otherwise enter the waste stream.

Recycle

Promote consumer awareness of recycling PE foam through RecyclePEFoam.com. Visit www.recyclepefoam.com to join the network or receive more information.

1.4

1/4″, 5/16″, 1/2″ (7mm, 7.2mm, 11mm)

48″ (1220mm)

250′, 225′, 125′ (76m, 68m, 38m)

1.7

5mm, 3/8″(8.9mm)

48″ (1220mm)

250′, 200′ (76m, 61m)

Unlimited Possibilities UnlimitedProduct ProductDesign Designand andEngineering Engineering Possibilities Sealed Air polyethylene foams, originally developed for protective packaging applications, also exhibit outstanding physical properties that make them ideal for a broad range of products in today’s active, value-conscious marketplace: •

Strong—excellent tensile and tear properties

•

Flexible—bends without breaks or tears

•

Very Resilient—recovers from compressions and impacts

•

Wide range of designer colors and densities

•

Non-dusting Non --dusting

•

Non-toxic Non --toxicand andodorless odorless

•

Moisture and chemical resistant

•

Maintains dimensional stability over a wide emperature temperaturerange range

•

Buoyant – excellent for recreational activities

•

Easily laminated – bonds to itself and a variety of substrates

Sporting Goods, Goods,Athletic AthleticEquipment Equipment and Toys Sporting and Toys Outstanding buoyancy, resiliency and durability make Sealed Air polyethylene foams a natural choice for water sport applications, protective athletic equipment, games and accessories: •

Personal flotation devices,(i.e., life jackets)

•

Surf and body board construction

•

Floating pool toys and furniture

•

Spas and hot tubs

•

Athletic equipment and wall padding

•

Aerobic steps

•

Exercise and camping mats

•

Golf bag and backpack inserts

•

Archery and dart targets

•

Car-top carriers and racks

•

Toys of all kinds

Construction ConstructionEngineering EngineeringApplications Applications Superior insulating and barrier characteristics, along with easy on-site fabrication, make Sealed Air polyethylene foam products ideal for a wide range of construction applications: •

Flooring underlayment

•

Concrete curing blankets

•

Pipe insulation

•

Sill plate gaskets

•

Separation and pressure relief joints foundations, roofs, floors and concrete pavement

•

Closure strips and gaskets

•

Pool liners and covers

•

Buried cable protection

•

Underground oil and gas pipeline protection

•

Tunnel lining

•

Acoustical insulation

•

Vibration isolation for heavy equipment installations

Unlimited Possibilities UnlimitedProduct ProductDesign Designand andEngineering Engineering Possibilities Sealed Air polyethylene foams, originally developed for protective packaging applications, also exhibit outstanding physical properties that make them ideal for a broad range of products in today’s active, value-conscious marketplace: •

Strong—excellent tensile and tear properties

•

Flexible—bends without breaks or tears

•

Very Resilient—recovers from compressions and impacts

•

Wide range of designer colors and densities

•

Non-dusting Non --dusting

•

Non-toxic Non --toxicand andodorless odorless

•

Moisture and chemical resistant

•

Maintains dimensional stability over a wide emperature temperaturerange range

•

Buoyant – excellent for recreational activities

•

Easily laminated – bonds to itself and a variety of substrates

Sporting Goods, Goods,Athletic AthleticEquipment Equipment and Toys Sporting and Toys Outstanding buoyancy, resiliency and durability make Sealed Air polyethylene foams a natural choice for water sport applications, protective athletic equipment, games and accessories: •

Personal flotation devices,(i.e., life jackets)

•

Surf and body board construction

•

Floating pool toys and furniture

•

Spas and hot tubs

•

Athletic equipment and wall padding

•

Aerobic steps

•

Exercise and camping mats

•

Golf bag and backpack inserts

•

Archery and dart targets

•

Car-top carriers and racks

•

Toys of all kinds

Construction ConstructionEngineering EngineeringApplications Applications Superior insulating and barrier characteristics, along with easy on-site fabrication, make Sealed Air polyethylene foam products ideal for a wide range of construction applications: •

Flooring underlayment

•

Concrete curing blankets

•

Pipe insulation

•

Sill plate gaskets

•

Separation and pressure relief joints foundations, roofs, floors and concrete pavement

•

Closure strips and gaskets

•

Pool liners and covers

•

Buried cable protection

•

Underground oil and gas pipeline protection

•

Tunnel lining

•

Acoustical insulation

•

Vibration isolation for heavy equipment installations