Curriculum vitae of Maria Lucia Curri

Curriculum vitae of Maria Lucia Curri Personal information Maria Lucia Curri Born in Taranto (Italy) on 5 April 1968 Nationality: Italian Status: unm...
Author: Clara Franklin
4 downloads 0 Views 169KB Size
Curriculum vitae of Maria Lucia Curri

Personal information Maria Lucia Curri Born in Taranto (Italy) on 5 April 1968 Nationality: Italian Status: unmarried Private Address: Via B. Lorusso 244 I-70100 Bari Italy Phone +393475330660 (mobile) Professional Address: National Research Council CNR Institute for Physical and Chemical Processes IPCF, Bari Division c/o Chemistry Department, Via Orabona 4, I-70126, Bari Italy tel: +390805442027 fax: +390805442128 email address: [email protected] Present position Permanent position as Senior Researcher (Primo Ricercatore) at the Institute for Physical and Chemical Processes (Istituto per i Processi Chimico Fisici) IPCF CNR, Bari Division (Italy)

Education 1986

High School Diploma (Diploma di Maturità Scientifica at Liceo Scientifico “G.Battaglini” Taranto –Italy) with full marks (60/60)

1993

Degree in Chemistry with full marks (110/110) with the research project “Archaeological finding characterization by means of ICP-OES, ESCA and ASV measurements on medieval pottery from Cathedral of Bari (Italy)”

1993-1996

PhD in Chemistry with the thesis “Archaeometry of Mediterranean Pottery” under the supervision of Prof. Angela Traini.

1996-1998

Post-doctoral fellowship at CNR Centro Studi Chimico Fisici sull’Interazione LuceMateria, Bari- Italy, directed by Prof. Mario Della Monica.

Professional Career 1 March 2010 Since the 1st March 2010 she has been appointed as Senior Researcher at CNR IPCF Bari Division. 2000- 2010

Research Permanent Position at CNR IPCF Bari Division (formerly Center of ChemicalPhysical Studies on Light-Matter Interaction - “Centro Studi Chimico Fisici sull’Interazione Luce Materia” Bari - Italy) Responsible for the research activities dealing with synthesis and characterization of nanostructured materials for optoelectronic and photocatalytic applications.

Maria Lucia Curri _____________________________________________________________________________________

1999-2000

Research Position at CNR Center of Chemical-Physical Studies on Light-Matter Bari Working on nanostructures material synthesis and characterization

1997-1998

Post Doctoral Research Fellowship at CNR Center of Chemical-Physical Studies on LightMatter Interaction Bari Set up of novel methods to synthesize II-VI semiconductor nanocrystals by using microemulsion systems and their optical and structural characterization. Active involvement in the preliminary studies for design and develop sensors based on the coupling of enzymes and semiconducting nanocrystals for analytes of interest in food and agriculture industry.

1995-1996

Research Assistant at Chemistry Department – University College London (U.K.) Chemical characterization of archaeological findings by using spectroscopical and structural techniques (Raman microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction).

1994

Research assistant at University of Bari (Italy)

1993-1996

PhD at Department of Chemistry (University of Bari Italy) Investigation on archaeological materials (pottery) by using an integrated and complementary analytical approach.

1993

Research assistant at University of Foggia (Italy)

Scientific activities Currently responsible at CNR IPCF Bari Division for the material chemistry activities aiming to design, fabricate and process inorganic solids at the nanoscale. The main activities include: -

Synthesis of nanoparticles, also in quantum confinement regime, with control on size shape and crystalline phase, in order to finely tune their chemical-physical properties

-

Functionalization of the nanoparticles with surface chemistry exchange procedures

-

Characterization of the colloidal nanoparticles with spectroscopical UV-vis-NIR absorption, luminescence, FTIR, XPS), structural (transmission microscope, X-ray powder diffraction) and morphological (AFM) techniques

-

Organization in mesoscopical structures (films, 2/3 D assemblies, polymer based nanocomposites, hybrid electrodes) of the prepared nano-objects with tailored functional properties

-

Investigation of the unusual size-and shape-dependent (photo)catalytic and opto-electronic properties of the newly fabricated nanostructured materials carried out to assess their technological potential for their use in environmental technologies (water treatments and sensing applications) and their integration in systems and devices

2

Maria Lucia Curri _____________________________________________________________________________________

In particular the following projects have been performed: •

Set up of flexible synthetic strategies to obtain a wide range of nanoparticles (TiO2, ZnO, CdS, CdSe, [email protected] –core-shell, ZnSe, and TiO2/Ag, TiO2, /Au coupled systems, Fe2O3, PbS) with a good control on size, shape and crystalline phase



Functionalization of colloidal nanocrystals by modification of the surface chemistry of the nanoobjects for make them compatible with a variety of physical and chemical environment, including bioconjugation for biological applications



Organization of the nanoparticles in 2/3 D structures by assembly, either spontaneous or directed, soft lithography, layer-by-layer, standard deposition techniques (spin coating, casting)



Preparation and characterization of nanocomposites based on organic polymer and semiconductor nanocrystals, their deposition as thin film



Nanocrystal based nanocomposites for micro and nanofabrication by means of either conventional and emerging lithographyc techniques, such as UV microstructuring, Nano Imprint Lithography, ink jet printing



Hybrid heterojunctions based on conducting conjugated polymers and semiconducting inorganic nanocrystals for energy conversion experiments



Modified electrodes formed by nanocrystal based films and sensitizer, such as phtalocyanins: photoelectrochemical investigation



Test of the optelectronic properties of the prepared materials in optical sensing elements



Photodegradation of organic compounds in aqueous and organic environment assisted by oxide nanoparticles



Synthesis of metal/oxide nanocrystal nanocomposite and their application in red-ox processes as bifunctional photocatalysts and charge storage experiments

Teaching and tutorial activities -

Tutorial activities for degree and doctoral projects at the Department of Chemistry University of Bari – Bari (Italy), being co-supervisor of 12 students for their Master (Laurea) project, and advisor for 8 PhD candidates since 1998.



Has been supervisor of two CNR fellowship holders and four CNR research assistants on the following topics: ƒ

2/3 D assembly of colloidal nanocrystals for nanostructured materials”

ƒ

“Development of 2D assembly techniques of nanoparticles onto metal and insulating substrates”

ƒ

“Auto-organization of colloidal nanocrystals”

3

Maria Lucia Curri _____________________________________________________________________________________

ƒ

“Incorporation of metallic and magnetic nanoaprticles in polymers and chemical and physical characterization of the composites”

ƒ

“Colloidal semiconductor nanocrystals immobilized onto substrates for photocatalytic application”

ƒ •

“Application of magnetic nanostructured materials”

She has been part of Commission for evaluation of international PhD thesis: ƒ

Gemma Aragay Esteva “Macro, micro and manomaterials based tools for heavy metal detection” Universitat Autonoma de Barcelona (Spain) Directors: Prof. A. Merkoci and Prof. J. Pons.

ƒ

Tehseen Ahmed “Kinetics of photochemical reactions of methylene green with organic reductants” University of Karachi (Pakistan) Director Prof Fahim Uddin.



Lecturer in numerous Chemistry Doctoral School courses- University of Bari. (2004-2005)



Lecturer in the Archaeological Chemistry course at University of Bari (contract professor of the Laboratory of Archaeometry, for 3 years, since 2003)



Lecturer in the “Nanostructured Materials” course in the Science and Technology of Material at Science Faculty at University of Bari (Italy) (2005-2009)



Lecturer in the Training Course for “Expert in protection and conservation techniques for Cultural Heritage” hold at University of Lecce (July 2011) within the frame of the Strategic Project “Protection, consolidation and cleaning of stones characteristic of Apulia region: experimental analysis of environmental friendly products and monitoring of the treatments.” within the Regional Framework Program for Scientific Research (Italy).



Lecturer at 1st, 2nd and 3rd Panama (Patterning at Nanoscale Methods and Applications) Summer School within the frame of the NaPa Integrated Project activities (Toulouse, France, July 2005 and July 2006) on the topic “Nanoparticles for patterning”



Lecturer at the 3rd National School on Molecular Materials for Photonic and Electronic 20-24 June Tortoli (Italy) on the topic “Synthesis and application of nanocrystals and hybrid systems with organic and biologic molecules”



Responsible for the topic “Merging Polymer Science with Inorganic and Physical Chemistry”at XV NATIONAL SCHOOL ON MATERIAL SCIENCE “Convergent Technologies in Science: Topics Related to Functional Materials, Energy and Human Health” 21-30 September 2009 Brixen (Italy)



Lecturer at the “Nanostructrured Hybrid Materials for Energy Conversion and Storage” Summer School in the frame of the ORION FP7 EU funded project 5-10 June Ostuni (BR) Italy

Research management and other scientific activities •

Scientific responsible for CNR IPCF Bari and workpackage leader in the European Project of EU FP7 METACHEM “Nanochemistry and self assembly routes to metamaterials for visible light”, NMP

4

Maria Lucia Curri _____________________________________________________________________________________

2008 Small 2 (NMP 2.2.2 Nanostructured Metamaterials)(starting October 2009) •

Scientific responsible for CNR IPCF Bari of the Strategic Project “Protection, consolidation and cleaning of stones characteristic of Apulia region: experimental analysis of environmental friendly products and monitoring of the treatments.” within the Regional Framework Program for Scientific Research (Italy)



Scientific responsible for CNR IPCF Bari of the project “NANOPLATFORM” “Interfacing single nanoparticles embedded in ultra thin polymers layers” Bilateral action within frame of the Cooperation Agreement between tra CNR and CSIC (Spain) (2009-2010)



Scientific responsible for CNR IPCF Bari of the “RELA-VALBIOR” “Network of laboratories to support research in the area of “Innovative technologies for the valorisation of residual biomass of the productive sectors of Apulia Region” within the frame of Regional Framework Program for Scientific Research (Italy)



Scientific responsible for CNR IPCF Bari and workpackage leader in the Integrated Project of 6th EU FP NaPa “Emerging Nanopatterning Methods” (contr. N. 500120), for the activities related to modification of polymers with nanoparticle having functional properties and for the nanoparticle synthesis for self-assembly purposes and soft lithography applications



Scientific responsible for CNR IPCF Bari and workpackage leader in the STREP Project of 6th EU FP NOVOPOLY “Novel functional polymer materials for MEMS and NEMS applications” (contr. N. STRP 013619) for activities linked to the synthesis, functionalization and characterization of nanoparticles for modification of functional polymers



Member of the CNR IPCF Institute Committee from 2003 to 2007 and recently elected for the 20101013 mandate.



Responsible in 2009 for the sub-project (“Commessa”) “Multiscale functional nanostructures: theoretical and experimental investigation of property designed materials towards devices” (MD.P06.030 in the Department of Materials and Devices of CNR)



Responsible of the “CHEMOS” Laboratory of Chemistry for Materials and Organized Structures at CNR IPCF Bari



Member of the Working Group on National and International Collaboration at CNR IPCF



Member of the Editoral Board of:



ƒ

The Open Process Chemistry Journal

ƒ

Micro & Nano Letters

Guest Editor of the Special Issue of Micro & Nano Letters “Micro and Nano Technologies for ProbeBased Microscopy”



Member of the Advisory Board of the School of Soft Matter Research of Freiburg Institute for Advanced Studies (FRIAS) Albert-Ludwigs-University Freiburg (Germany)



Member of Scientific Committee of XXXIX Italian National Congress of Physical Chemistry

5

Maria Lucia Curri _____________________________________________________________________________________



Member of the International Advisory Board Member of the 1st and 2nd International Conference "Disclosing Materials at Nanoscale" of CIMTEC 2006 and CIMTEC 2010, respectively



Member of the Technical Programme Committee (TPC) for the 4th IEEE-NEMS Conference, 5-8 January 2009 Shinzen China



Member of the Technical Programme Committee (TPC) for the 4th IEEE-NEMS Conference, Kaohsiung, Taiwan, February 20-23 2011



Member of Advisory board of the Physical Chemistry Division of the Italian Chemical Society (20102011)



Member of the Technical Programme Committee (TPC) for the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems March 5-8, 2012 at Kyoto, Japan.



Expert Evaluator for Project proposal for the EU 7 Framework Programme in FP7-NMP-2007SMALL-1, FP7-NMP-2008-SMALL-2 first stage and FP7-NMP-2008-SMALL-2 second stage.



Referee for the EUROCORES Self Organized Nanostructures “SONS” projects from European Science Foundation



Paper reviewer for “Langmuir”, “Journal of Physical Chemistry B”, “Nanotechnology”, “European Journal of Inorganic Chemistry”; “Applied Catalysis B: environmental”; “Journal of Hazardous Materials”;

“Material

Science

and

Engineering

B”,

“Electrochimica

Acta”,”Chemical

Communciation”, “Journal of Colloid and Interface Science”, “Chemistry of Materials”, Advances Materials, Nanoscale, Advanced Functional Materials. •

Member of “PHANTOMS” Network of Excellence EU 5th FP



Member of Italian Interuniversity Consortium on Material Science and Technology INSTM



Member of CNR evaluating commissions for recruiting researchers (2001 and 2004)



Session Chairperson at the following concerence: ƒ

4th IEEE-NEMS Conference, 5-8 January 2009 Shinzen (China)

ƒ

Eurosensors XXIII Conference 6- September 2009 Lausanne (Switzerland)

She is and has been actively involved in the research activities of the following national projects: ƒ

“Sens&MicroLab” Network of laboratories for “Innovative sensors and microsystems in aeronautic field” within the frame of Regional Framework Program for Scientific Research (Italy) 2009-2014

ƒ

“ORION” "Ordered Inorganic-Organic Hybrids Using Ionic Liquids For Emerging Applications" EU FP7 NMP-2008-Large-2 NMP-2008-2.4-1 Inorganic-Organic Hybrid Materials (2009-2013)

ƒ

“Photocatalytic degradation of organic pollutants in aqueous solutions by nanostructured semiconductors” Explorative Project funded by Apulia Region within the Scientific Research Framework Program 2006

6

Maria Lucia Curri _____________________________________________________________________________________



“Nanostructured materials for optoelectronic and environmental application” MIUR programme (ref n. 232 n. 1105 9 October 2002) 2004-2006



SYNthEsis of novel oRGanic materials and supramolecular architectures for high efficiencY optoelectronic and photonic systems (SYNERGY) MIUR FIRB programme (ref. RBNE03S7XZ FIRB 2003 D.D. 2186) 2005-2007



MICROPOLIS “Polymer based microsystems” MIUR FIRB programme (in collaboration with CNR Institute of Microelectronics and Microsystems Lecce Division.) 2003-2005



“Design and development of novel sensor via immobilization of enzymes and cells on nanostructured” Progetto Finalizzato CNR programme 1998-2001

Research visiting appointments •

September 1995 - June 1996: research assistant in the group of Prof. Robin J: H: Clark at Christopher Ingold Laboratories – University College London (United Kingdom).



October 2004: short visiting researcher (two weeks) at LMS1 Laboratory EPFL (Switzerland) funded by PHANTOMS Excellence Network.



September – October 2005 CNR-SNF funded exchange visit programme (two months) at EPFL LMIS1 Laboratory.



August – October 2006 invited researcher (three months) at EPFL LMIS Laboratory.

Invited talks 1.

M. L. Curri “Titania nanorods stabilized noble metal nanoparticle and their properties” 4th International Workshop on the Utilization and Commercialization of Photocatalytic Systems, Coatings, and Water and Air Purification Methods Saarbrucken 10-12 October 2004 (Germany).

2.

M. L. Curri “Photocatalytically active nanoparticles” Cimtec International Ceramics Congress Acireale Italy 4-9 June 2006

3.

M. L. Curri "Colloidal Nanoparticles: Novel Perspective for Nanopatterning" Litho 2006 Conference Marseille (France) 26-30 June 2006.

4.

M. L. Curri “Polymer nanocomposites based on colloidal nanocrystals as novel functional materials towards systems and devices” Nanoforum Conference 27-28 September 2006 Milan (Italy).

5.

M. L. Curri “Luminescent colloidal nanocrystals: novel perspective for optical investigation of biological systems” BioImaging and Optic Platform Inauguration” EPFL Lausanne Switzerland 67 September 2007.

6.

M. L. Curri "Colloidal nanocrystals at work: tailoring the properties of original functional materials for novel science and technology opportunities” Invited Seminar at Centro de Fisica de Materiales CSIC Universidad del Pais Vasco 10 September 2007, San Sebastian (Spain).

7.

M. L. Curri “Nanoparticles as functional building blocks for tailored materials towards device

7

Maria Lucia Curri _____________________________________________________________________________________

applications” 33rd International Conference on Micro- and Nano-Engineering 23-26 September 2007, Copenhagen Denmark 23-26 September 2007. 8.

M. L. Curri “Colloidal nanocrystals as tailored building blocks for functional materials: strategies for polymer nanocomposites and assemblies" in the series of seminars “Advances in Materials” of the Materials Institute of the EPFL Lausanne Switzerland 19 November 2007.

9.

M. L. Curri “Colloidal nanocrystals as tailored building blocks for nanocomposites and assemblies: original opportunities for functional materials” 37th Conference of the Italian Physical Chemical Society, Camogli (Genova) – Italy 24-29 February 2008.

10.

M. L. Curri “Towards emergence of new function by engineering materials: colloidal nanocrystal based structures for opto-electronic, sensing and biomedical applications” 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems Shenzen, China 5-8 January 2009.

11.

M. L. Curri “Patterning and assembling colloidal nanocrystal-based functional materials for biomedical applications “New materials for medicine” Puglia - South Australia Scientific Workshop Bari – Italy September 15th, 2009

12.

M. L. Curri “Towards Emergence of New Function by Engineering Materials: Colloidal Nanocrystals as Building Blocks for Nanocomposites and Assemblies” AVS 56th International Symposium San Jose California 8-13 November 2009

13.

M. L. Curri "Colloidal chemistry routes for fabrication of nanoparticle based metamaterials" SPIE Photonics Europe Brussels, Belgium 12 - 16 April 2010

14.

M. L. Curri “Towards Emergence of New Function by Engineering Materials: Colloidal Nanocrystals as Building Blocks for Nanocomposites and Assemblies” Hybrid Optoelectronic and Photovoltaic Devices for Renewable Energy San Sebastian Spain 26 – 27 April 2010

15.

M. L. Curri “Emergence of new functions in nanostructured materials: engineering colloidal nanocrystals for nanocomposites and assemblies” Workshop "Fourth Black Forest Focus in Soft Matter" Titisee (Black Forest) (Germany) 20-23 July 2010.

16.

M. L. Curri “Functional materials based on nanostructures: tailoring properties for the manufacture of optical components” Workshop “Alternative patterning methods for the manufacture of optical components and systems” in the frame of Academia and company collaboration and technology transfer in advanced polymers (ACAPOLY) 2nd September 2010 Berlin (Germany).

17.

M. L. Curri “Patterning and assembling colloidal nanocrystal-based materials: original strategies for functional materials" Invited Seminar at CIN2 Centre d’Investigaciò en Nanociencia I Nanotecnologia, 29th October 2010 Barcelona (Spain).

18.

M. L. Curri “Colloidal nanocrystals for nanocomposites: emergence of new functions in nanostructured materials" Invited lecture at 5th International Workshop on Polymer/Metal Nanocomposites Bari 20-22 September (Italy).

International Collaborations •

2004-2005: collaboration with CIME at EPFL for TEM and HR-TEM experiments



2004-present: collaboration with several European research laboratories within the frame of the European Projects activities (6th FP EU – NMP priority) “NaPa”, Integrated Project, working with Prof. C. Sotomayor Torres Tyndall National Institute, Ireland, Dr. Heiko Wolf, IBM Research

8

Maria Lucia Curri _____________________________________________________________________________________

Laboratory Zurich, Switzerland, Prof. Jurriaan Huskens, University of Twente, The Netherlands, Prof. A. Kristensen, MIC, Technical University of Denmark, Denmark, Dr. D. Mecerreyes CIDETEC, Spain, and “Novopoly”, STREP project, working with Prof Harm-Anton Klok and Prof. Juergen Brugger at EPFL, Switzerland, Dr. Gabi Gruetzner, Micro resist technology Berlin, Germany, Prof. Anja Boisen, MIC, Technical University of Denmark, Prof. Francesc Perez Murano National Collaborations • • • • • • • •

CNR Institute for Physical and Chemical Processes, IPCF Pisa and Messina Divisions. Messina and Pisa CNR Institute on Water Research, IRSA Bari Division, Bari CNR Institute for the Study of Nanostructured Materials, ISMN Roma Division, Rome CNR Institute of Crystallography, IC Bari Division CNR Institute for Microelectronics and Microsystems, IMM Lecce Division Lecce, Lecce CNR Institute for Chemistry of Organometallic Compounds, ICCOM Bari Division, Bari INSTM, Dipartimento di Chimica, Università di Firenze, Firenze Department of Physics Università di Bari

Awards and Prizes • Winner of the "L. Senatore" (Italian Society of Physical Chemistry) award in 2000 for the poster ”Chemical and physical characterization of hybrid structures based on in organic nanocrystalline semiconductors and semiconducting polymer for opto-electronic applications” •

Best poster at E-MRS Spring Meeting Strasbourg June 2002 “Colloidal oxide nanoparticles for the photocatalytic degradation of organic dyes”



Best poster at E-MRS Spring Meeting Strasbourg E-MRS Spring Meeting Strasbourg 2003 "TiO2 nanocrystals - conjugated -polymer thin film for photovoltaic application"



Best poster at 2nd National Conference on Nanoscience and Nanotechnology: The Molecular Approach, Bologna (Italy) 25-27 February 2004 “Optical properties of hybrid composites based on highly luminescent CdS nanocrystals in polymer”



Best poster at E-MRS Spring Meeting Strasbourg May 2004. “Hybrid organic nanocomposites based on semiconducting colloidal quantum dots in polymers”.



"L. Senatore" award Italian Society of Physical Chemistry) in 2006 for the poster “Optical and morphological properties of hybrid nanocomposite based on colloidal TiO2 nanocrystals in polymer”

She has been co-authoring over 100 papers, of which more than 70 on international peer-reviewed journals and a number of other publications (conference proceedings, book chapters etc.) and contributing to many conferences, also with invited talks. H index = 24 (Source: i. ISI Web of Science, ii. Scopus)

9

Maria Lucia Curri _____________________________________________________________________________________

Languages •

Italian: mother tongue



English: fluent



French: basic knowledge

10

Maria Lucia Curri _____________________________________________________________________________________

List of Publications

Peer reviewed JCR papers 1.

A. Petrella, P. Cosma, M. L. Curri, S. Rochira, A. Agostiano “Colloidal nanocrystal ZnO- and TiO2- modified electrodes sensitized with chlorophyll a and carotenoids: a photoelectrochemical study” (2011) accepted for publication on Journal of Nanoparticle Research

2.

C. Ingrosso, C. Martin-Olmos, A. Llobera, C. Innocenti, C. Sangregorio, M. Striccoli, A. Agostiano, A. Voigt, G. Gruetzner, J. Brugger, F. Perez-Murano, M. L. Curri “Oxide Nanocrystals based Nanocomposite for Fabrication of photoplastic AFM Probes” (2011) Nanoscale, 3 (11), 4632 - 4639

3.

F. Petronella, E. Fanizza, G. Mascolo, V. Locaputo, L. Bertinetti, G. Martra, S. Coluccia, A. Agostiano, M. L. Curri, R. Comparelli “Photocatalytic Activity of Nanocomposite Catalyst Films based on Nanocrystalline Metal/Semiconductor” (2011) J. Phys. Chem. C 115, 12033– 12040.

4.

N. Depalo, P. Carrieri, R. Comparelli, M. Striccoli, A. Agostiano, L. Bertinetti, C. Innocenti, C. Sangregorio, M. L. Curri “Bio-functionalization of anisotropic nanocrystalline semiconductormagnetic heterostructures” (2011) Langmuir, 27,6962–6970.

5.

N. Alayo, A. Panniello, M. Striccoli, M. L. Curri, F. Pérez-Murano “Towards individual electrical contact of nanoparticles in nanocomposites” (2011) Microelectronic and Engineering doi:10.1016/j.mee.2011.02.059.

6.

C. Jiang, L. Ouattara, C. Ingrosso, M. L. Curri, V. Krozer, A. Boisen, M.H. Jakobsen, T.K. Johansen “Microwave absorption properties of gold nanoparticle doped polymers” (2011) SolidState Electronics 57, 19-22

7.

A. Convertino, M. Tamborra, M. Striccoli, G. Leo, A. Agostiano, M. L. Curri “PMMA nanocomposites based on TiO2 nanocrystals: tailoring material properties towards sensing” (2011) Thin Solid Films 519, 3931–3938

8.

M. Corricelli, D. Altamura, L. De Caro, A. Guagliardi, A. Falqui, A. Genovese, A. Agostiano, C. Giannini, M. Striccoli, M. L. Curri “Self-organization of mono- and bi-modal PbS nanocrystal populations in superlattices” (2011) CrysEngComm 13, 3988-3997.

9.

G. Chandramohan, D. Dirk, G. Bertoni, A. Falqui, A. Genovese, T. Pellegrino, A. Roig, A. Quarta, R. Comparelli, M. L. Curri, R. Cingolani, L. Manna “A Cast-Mold Approach to Iron Oxide and Pt/Iron Oxide Nanocontainers and Nanoparticles with a Reactive Concave Surface” (2011) J. Am. Chem, Soc. 2011, 133 (7), 2205–2217.

10.

G. Giancane, C. Ingrosso, M. L. Curri, A. Agostiano, L. Valli "Tetrakis-(isopropoxy-carbonyl)copper-phthalocyanine thin films: deposition, characterization and application" (2010) Journal of Porphyrins and Phthalocyanines, 14, 741-751.

11.

E. Fanizza, L. Malaquin, T. Kraus, H. Wolf, M. Striccoli, N. Micali, A. Taurino, A. Agostiano, M. L. Curri “Precision patterning with luminescent nanocrystal functionalized beads”(2010) Langmuir, 26, 14294–14300.

12.

D. Altamura, M. Corricelli, L. De Caro, A. Guagliardi, A. Falqui, A. Genovese, A. Nikulin, M.

11

Maria Lucia Curri _____________________________________________________________________________________

L. Curri, M. Striccoli, C. Giannini "Structural investigation of 3D self-assembled PbS binary superlattices" (2010) Cryst. Growth Des. 10, 3770–3774 13.

M. L. Curri, R. Comparelli, M. Striccoli, A. Agostiano “Emerging methods for fabricating functional structure by patterning and assembling engineered nanocrystals” (2010) Phys. Chem. Chem. Phys. 12, 11197–11207. (Cover page)

14.

C. Ingrosso, E. Sardella, S. Keller, S. Dohn, M. Striccoli, A. Agostiano, A. Boisen, M. L. Curri “Surface functionalization of epoxy resist based microcantilevers with iron oxide nanocrystals” (2010) Advanced Material 22, 3288-3292.

15.

M. Anni, E. Alemanno, A. Creti, C. Ingrosso, A. Paniello, M. Striccoli, M. L. Curri, M. Lomascolo "Interplay between Amplified Spontaneous Emission, Foerster Resonant Energy Transfer and Self Absorption in Hybrid Poly(9,9-dioctylfluorene)-CdSe/ZnS Nanocrystal Thin Films" (2010) J. Phys. Chem. A, 114, 2086–2090.

16.

F. Giannici, T. Placido, M. L. Curri, M. Striccoli, A. Agostiano, R. Comparelli, “The fate of silver ions in the photochemical of gold nanorods: an extended X-ray absorption fine structure analysis” (2009) Dalton Transaction 10367–10374

17.

T. Placido, R. Comparelli, F. Giannici, P. D. Cozzoli, G. Capitani, M. Striccoli, A.Agostiano, M. L. Curri “Photochemical Synthesis of Water-Soluble Gold Nanorods: the Role of Silver in Assisting Anisotropic Growth” (2009) Chem. Mater. (18), 4192-4202

18.

C. Ingrosso, M. L. Curri, P. Fini, G. Giancane, A. Agostiano, L. Valli “Functionalized copperphthalocyanine in solution and as thin film: photochemical and morphological characterization towards applications” (2009) Langmuir 25 (17), 10305–10313

19.

E. Sardella, F. D. Liuzzi, R. Comparelli, N. Depalo, M. Striccoli, M. L. Curri, A. Agostiano, P. Favia, R. d’Agostino “Chemically directed assembly of functionalized luminescent nanocrystals onto plasma modified substrates toward sensing and optoelectronic applications” (2009) Plasma Processes & Polymer 6 S870-S875

20.

M. Fittipaldi, M. L. Curri, R. Comparelli, M. Striccoli, A. Agostiano, N. Grassi, S. Sangregorio, D. Gatteschi “A multifrequency EPR study on organic-capped anatase TiO2 nanocrystals” (2009) J. Phys. Chem. C 2009, 113 (15)

21.

J. Y.Kim, C. Ingrosso, V. Fakhfouri, M. Striccoli, A. Agostiano, M. L. Curri, J. Brugger “Multi-color inkjet printing of highly luminescent nanocrystal based nanocomposites” (2009) Small 5, 1051-1057.

22.

C. Ingrosso, J. Y. Kim, E. Binetti, V. Fakhfouri, M. Striccoli, A. Agostiano, M. L. Curri, J. Brugger “Drop-on-Demand inkjet printing of highly luminescent CdS and [email protected] nanocrystal based nanocomposites” (2009) Microelectronics Engineering 86 (2009) 1124–1126.

23.

A. Convertino, G. Leo, M. Striccoli, G. Dimarco, M. L. Curri “Effect of shape and surface chemistry of TiO2 colloidal nanocrystals on the organic vapor absorption capacity of TiO2/PMMA composite” (2008) Polymer 49,(25) 5526-5532.

24.

N. Depalo, A. Mallardi, R. Comparelli, M. Striccoli, A. Agostiano, M. L. Curri “Luminescent Nanocrystals in Phospholipid Micelles for Bioconjugation: an Optical and Structural Investigation” (2008) Journal of Colloid and Interface Science 325, 558–566.

25.

C. Sciancalepore, T. Cassano, M L Curri, D. Mecerreyes, A. Valentini, A. Agostiano, R. Tommasi, M. Striccoli “TiO2 nanorods / PMMA co-polymer based nanocomposites: highly

12

Maria Lucia Curri _____________________________________________________________________________________

homogeneous linear and non linear optical material (2008) Nanotechnology 19 205705-205713 . 26.

A. Petrella, M. Tamborra, P. Cosma, M. L. Curri, M. Striccoli, R. Comparelli, A. Agostiano “Photocurrent generation in a CdS nanocrystals /poly[2-methoxy-5-(2'-ethyl-exyloxy)phenylene vinylene] electrochemical cell” (2008) Thin Solid Film 516 5010–5015.

27.

P. Fini, N. Depalo, R. Comparelli, M. L. Curri, M. Striccoli, M. Castagnolo, A. Agostiano “Interactions between surfactant capped CdS nanocrystals and organic solvent” (2008) Journal of Thermal Analysis and Calorimetry 92, (1), 271-277.

28.

M. Tamborra, M. Striccoli, M. L. Curri, A. Agostiano “Hybrid Nanocomposites Based on Luminescent Colloidal Nanocrystals in PMMA: a Spectroscopical and Morphological Investigation” (2008) Journal of Nanoscience and Nanotechnnology 8, 628-634.

29.

V. Reboud, N. Kehagias, M. Zelsmann, M. Striccoli, M. Tamborra, M. L. Curri, A. Agostiano, M. Fink, F. Reuther, G. Gruetzner, C. M. Sotomayor Torres “Modification of spontaneous emission of (CdSe)ZnS nanocrystals embedded in nanoimprinted photonic crystals” (2008) Journal of Nanoscience and Nanotechnnology 8, 535-539 (cover page)

30.

C. Ingrosso, V. Fakhfouri, M. Striccoli, A. Agostiano, A. Voigt, G. Gruetzner, M. L. Curri, J. Brugger ”Luminescent nanocrystal modified epoxy photoresist for the fabrication of 3-D high aspect-ratio microstructures” (2007) Adv. Funct. Mater. 17, 2009–2017 (Cover page).

31.

V. Reboud , N. Kehagias M. Striccoli, T. Placido, A. Panniello, M. L. Curri, M. Zelsmann, C. Schuster, F. Reuther, G. Gruetzner, G. Redmond, C. M. Sotomayor Torres “Photoluminescence enhancement in metallic nanocomposite printable polymer” (2007) J. Vacuum Science and Technology B 25, 2642. selected for publication on the Virtual Journal of Nanoscale Science and Technology.

32.

M. G. Manera, P. D. Cozzoli, G. Leo, M. L. Curri, A. Agostiano, L. Vasanelli, R. Rella “Shape and Surface Coating for Surface Plasmon Resonance Alcohol Vapour Sensing” (2007) Sensors and Actuators B 126 (2007) 138–143.

33.

V. Reboud, N. Kehagias, M. Zelsmann, M. Striccoli, M. Tamborra, M. L. Curri, A. Agostiano, D. Mecerreyes, J. A. Alduncín, C. M. Sotomayor Torres “Nanoimprinted photonic crystals for the modification of the (CdSe)ZnS nanocrystals light emission” (2007) Microelectronic Engineering 84, 1574–1577.

34.

M. Tamborra, M. Striccoli, M. L. Curri, J. A. Alducin, D. Mecerreyes, J. A. Pomposo, N. Kehagias, V. Reboud, C. M. Sotomayor Torres, A. Agostiano “Nanocrystal Based Luminescent Composites for Nano Imprinting Lithography” (2007) Small 3, 822 – 828.

35.

A. Convertino, G. Leo, M. Tamborra, C. Sciancalepore, M. Striccoli, M. L. Curri, A. Agostiano “TiO2 colloidal nanocrystals functionalization of PMMA: a tailoring of optical properties and chemical adsorption” (2007) Sensors and Actuators B, 126 138–143.

36.

V. Reboud, N. Kehagias, M. Zelsmann, M. Striccoli, M. Tamborra, M. L. Curri, A. Agostiano, M. Fink, F. Reuther, G. Gruetzner, C. M. Sotomayor Torres “Spontaneous emission control of colloidal nanocrystals using nanoimprinted photonic crystals” Appl. Phys. Lett. 2007, 90, 011115 selected for publication on the January 22, 2007 issue of Virtual Journal of Nanoscale Science &Technology.

37.

G. Mascolo, R. Comparelli, M. L. Curri, G. Lovecchio, A. Lopez, A. Agostiano “Photocatalytic Degradation of Methyl-Red by TiO2: Comparison of the Efficiency of Immobilized Nanoparticles vs Conventional Suspended Catalyst” (2007) Journal of Hazardous Materials 142

13

Maria Lucia Curri _____________________________________________________________________________________

130–137. 38.

E. Fanizza, P. D. Cozzoli, M. L. Curri, M. Striccoli, E. Sardella, A. Agostiano “UV-light driven immobilization of surface-functionalized oxide nanocrystals onto silicon” (2007) Advanced Functional Materials, 17 201-211.

39.

R. Buonsanti, V. Grillo, E. Carlino, C. Giannini, M. L. Curri, C. Innocenti, C. Sangregorio, K. Achterhold, F.G. Parak, A. Agostiano, P. D. Cozzoli “Seeded growth of asymmetric binary nanocrystals made of a semiconductor TiO2 rod-like section and a magnetic γ-Fe2O3 spherical domain” (2006) Journal of Americam Chemical Society; 128(51); 16953-16970.

40.

C. Ingrosso, A. Petrella, P. Cosma, M. L. Curri, M. Striccoli, A. Agostiano “Hybrid junctions of Zn(II) and Mg(II) phthalocyanine with wide band gap semiconductor nano-oxides: spectroscopical and photoelectrochemical characterization” (2006) J. Phys. Chem. B 110(48); 24424-24432

41.

N. Depalo, R. Comparelli, M. Striccoli, M. L. Curri, P. Fini, L. Giotta, A. Agostiano “αCyclodextrin functionalized CdS nanocrystals for fabrication of 2/3 D Assemblies” J. Phys. Chem B (2006), 110, 17388-17399

42.

C. Ingrosso, A. Petrella, M. L. Curri, M. Striccoli, P. Cosma, P. D. Cozzoli, A. Agostiano “Photoelectrochemical properties of hybrid junctions based on zinc phthalocyanine and semiconducting colloidal nanocrystals” (2006) Electrochimica Acta, 51, 5120–5124

43.

R. Marcilla, M. L. Curri, P. D. Cozzoli, M. T. Martínez, I. Loinaz, H. Grande, J. A. Pomposo, D. Mecerreyes “Nano-objects on a round trip from water to organics by a polymeric ionic liquid vehicle” (2006) Small, 2, 507 – 512.

44.

P. D. Cozzoli, M. L. Curri, C. Giannini, A. Agostiano “Synthesis of TiO2-Au Composites by Titania Nanorod-Assisted Generation of Gold Nanoparticles at Aqueous/Nonpolar Interfaces" Small (2006) 2, 413-421.

45.

M. G.Manera, G. Leo, M. L. Curri, R. Comparelli, R. Rella, A. Agostiano, L. Vasanelli “Determination of optical parameters of colloidal TiO2 nanocrystals-based thin films by using surface plasmon resonance measurments for sensing applications” Sensors and Actuators B (2006) 115, 365-373.

46.

P. D. Cozzoli, M. L. Curri, A. Agostiano “Efficient charge storage in photoexcited TiO2 nanorod-noble metal nanoparticle composite systems”Chem Comm (2005) 3186-3188.

47.

R. Comparelli, M. L. Curri, E. Fanizza, P. D. Cozzoli, G. Mascolo, A. Agostiano “UV-induced Photocatalytic Degradation of Azo Dyes by Organic-Capped ZnO Nanocrystals Immobilized onto Substrate” Applied Catalysis B: Environmental (2005) 60, 1–11.

48.

P. D. Cozzoli, L Manna, M. L. Curri, S. Kudera, C. Giannini, M. Striccoli, A. Agostiano “Shape and Phase Control of Colloidal ZnSe Nanocrystals” Chemistry of Materials (2005) 17, 1296-1306.

49.

N. Depalo, R. Comparelli, M. L. Curri, M. Striccoli, A. Agostiano “Cyclodextrin mediated phase transfer in water of organic capped CdS nanocrystals” Synthetic Metals (2005) 148, 43-46.

50.

P.D. Cozzoli, E. Fanizza, M. L. Curri, D. Laub, A. Agostiano “Low-dimensional chainlike assemblies of TiO2 nanorod-stabilized Au nanoparticles” Chem Comm (2005) 942-944.

51.

M. Tamborra A. Petrella, M. L. Curri, M. Striccoli, P. Cosma, P. D. Cozzoli, A. Agostiano

14

Maria Lucia Curri _____________________________________________________________________________________

“Colloidal TiO2 nanocrystals / MEH-PPV: nanocomposites: (Photo)electrochemical study” J. Phys. Chem. B. (2005) 109, 1554 – 1562. 52.

M.G. Manera, P. D. Cozzoli, M. L. Curri, G. Leo, R. Rella, A. Agostiano, L. Vasanelli “TiO2 nanocrystal films for sensing applications based on surface plasmon resonance” Synthetic Metals (2005) 148, 25-29.

53.

C. Ingrosso, A. Petrella, M. L. Curri, M. Striccoli, P. Cosma, P. D. Cozzoli, A. Agostiano “Photoelectrochemical properties of Zn(II)phthalocyanine/ ZnO nanocrystals heterojunctions: nanocrystal surface chemistry effect”Applied Surface Science (2005) 246, 367–371.

54.

R. Comparelli, E. Fanizza, M. L. Curri, P. D. Cozzoli, G. Mascolo, R. Passino, Agostiano “Photocatalytic Degradation of Azo Dyes by Organic-Capped Anatase TiO2 Nanocrystals Immobilized onto Substrates” Applied Catalysis B: Environmental (2005) 55, 81-91.

55.

P. D. Cozzoli, R. Comparelli, E. Fanizza, M. L. Curri, A. Agostiano, D. Laub “Role of Metal Nanoparticles in TiO2/Ag Nanocomposite-Based Homogeneous Photocatalysis” J. Phys. Chem. B (2004) 108(28); 9623-9630.

56.

L. E. Depero, M. L. Curri "Inorganic Self –Assembly" Current Opinion in Solid State and Material Science (2004) 8/2, 103-109.

57.

R. Comparelli, P. D. Cozzoli, M. L. Curri, A. Agostiano, G. Mascolo, G. Lovecchio “Photocatalytic degradation of methyl-red by immobilized nanoparticles of TiO2 and ZnO” Water Science and Technology (2004) 49 183-188.

58.

M.G. Manera, G. Leo, M. L. Curri, P. D. Cozzoli, R. Rella, P. Siciliano, A. Agostiano, L. Vasanelli "Investigation On Alcohol Vapours/TiO2 Nanocrystal Thin Films Interaction By SPR Technique For Sensing Application" Sensors and Actuators B (2004) 100, 75–80.

59.

A. Petrella, P. D. Cozzoli, M. L. Curri, M. Striccoli, P. Cosma, A. Agostiano "Photoelectrochemical study on photosynthetic pigments-sensitized nanocrystalline ZnO films" Bioelectrochemistry (2004) 63, 99-102.

60.

A. Petrella, M. Tamborra, P. D. Cozzoli, M. L. Curri, M. Striccoli, P. Cosma, G. Farinola, F. Babudri, F. Naso, A. Agostiano "TiO2 Nanocrystals - MEH-PPV Composite Thin Films as Photoactive Material" Thin Solid Films (2004) 451/452, 64-68.

61.

P. D. Cozzoli, R. Comparelli, E. Fanizza, M. L. Curri, A. Agostiano, D. Laub ”Photocatalytic Synthesis of Ag Nanoparticles Stabilized by TiO2 Nanorods: a Semiconductor/Metal Nanocomposite in Homogeneous Nonpolar Solution” J. Am. Chem. Soc. (2004) 126(12); 38683879.

62.

M. Tamborra, M. Striccoli, R. Comparelli, M. L. Curri, A. Petrella, A. Agostiano "Optical Properties Of Hybrid Composites Based On Highly Luminescent CdS Nanocrystals In Polymer" Nanotechnology (2004) 15, S240–S244.

63.

P. Fini, M. L. Curri, M. Castagnolo, F. Ciampi, A. Agostiano "Calorimetric Study of CdS Nanoparticle Formation in W/O Microemulsions" Mat. Sci. & Eng. C. (2003) 23, 1072-1081.

64.

P. D. Cozzoli, R. Comparelli, E. Fanizza, M. L. Curri, A. Agostiano "Photocatalytic Activity Of Organic-Capped Anatase TiO2 Nanocrystals In Homogeneous Organic Solutions" Mat. Sci. & Eng. C. (2003) 23, 707-713.

65.

R. Comparelli, F. Zezza, M. Striccoli, M.L. Curri, R. Tommasi, A. Agostiano "Improved

15

Maria Lucia Curri _____________________________________________________________________________________

Optical Properties of CdS Quantum Dots by Ligand Exchange" Mat. Sci. & Eng. C. (2003) 23, 1083-1086. 66.

F. Zezza, R. Comparelli, M. Striccoli, M.L. Curri, R. Tommasi, A. Agostiano, M. Della Monica High quality CdS nanocrystals: surface effects" Synthetic Metal (2003) 139, 597–600.

67.

M. L. Curri, A. Petrella, M. Striccoli, P. D. Cozzoli, P. Cosma, A. Agostiano "Photochemical sensitisation process at photosynthetic pigments/Q-sized colloidal semiconductor heterojunctions" Synthetic Metal (2003) 139, 593–596.

68.

P. D. Cozzoli, M. L. Curri, A. Agostiano, G. Leo, M. Lomascolo "ZnO Nanocrystals by a Nonhydrolytic Route: Synthesis and Characterization" J. Phys. Chem. B (2003) 107, 4756-4762.

69.

M. L. Curri, R. Comparelli, P. D. Cozzoli, G.Mascolo, A. Agostiano "Colloidal Oxide nanoparticles for the photocatalytic degradation of organic dye" Mat. Sci. & Eng. C. (2003) 23, 285-289.

70.

M. L. Curri, A. Agostiano, G. Leo, A. Mallardi, P. Cosma, M. Della Monica “Development of a novel enzyme/semiconductor nanoparticles system for biosensor application” Mat. Sci. & Eng. C. (2002) 22, 423-426.

71.

M. L. Curri, A. Agostiano, F. Mavelli, M. Della Monica "Reverse micellar systems: self organised assembly as effective route for the synthesis of colloidal semiconductor nanocrystals" Mat. Sci. & Eng. C. (2002) 22, 449-452.

72.

M. L. Curri, G. Leo, M. Alvisi, A. Agostiano, M. Della Monica, L. Vasanelli "CdS nanocrystals from a quaternary water-in-oil microemulsion: preparation and characterization of selfassembled layers" J. Colloid. Inteface Sci. (2001) 243, 165-170.

73.

A. Agostiano A., M. Catalano M., M. L. Curri, L. Chiavarone, M. Della Monica, P. M. Lugarà, L. Manna, V. Spagnolo "CdS nanoclusters synthesis and characterisation in a quaternary microemulsion: the role of the co-surfactant" J. Phys. Chem. B. (2000) 104, 8391-8397.

74.

G. Leo, M. L. Curri, Cola A., Catalano M., Lomascolo M., Manna L., Quaranta F., Agostiano A., Farinola G. M., Babudri F., Naso F., Della Monica M., Vasanelli L. "Preparation and characterisation of organic-inorganic heterojunction based on BDA-PPV/CdS nanocrystals" Mat. Sci. & Eng. B (2000) 74, 175-179.

75.

A. Agostiano, M. Catalano, M. L. Curri, M. Della Monica, L. Manna, L. Vasanelli “Synthesis and structural characterisation of CdS nanoparticles prepared in a four components water in oil microemulsion” Micron (2000) 31, 253-258.

76.

P. Bruno, M. Caselli, M. L. Curri, A. Genga, R. Striccoli, A. Traini "Chemical characterisation of ancient pottery from South of Italy by ICP-OES. Statistical multivariate analysis of data" Analytica Chimica Acta (2000) 410, 193-202.

77.

R. J. H. Clark, M. L. Curri “The identification by Raman microscopy and x-ray diffraction of iron-oxide pigments and of the red pigments found on Italian pottery fragments” J. Molecular Structure (1998), 440, 105-111.

78.

R. J. H. Clark, M. L. Curri, C. Laganara “Raman Microscopy: The Identification of Lapis Lazuli on Medieval Pottery Fragments from the South of Italy” Spectrochim. Acta, Part A (1997) 53, 597-603.

79.

R. J. H. Clark, M. L. Curri, G. S. Henshaw, C. Laganara “Characterisation of Brown Black

16

Maria Lucia Curri _____________________________________________________________________________________

Pigment in Glazed Pottery Fragments from Castel Fiorentino (Foggia - Italy) by Raman Microscopy, X-Ray Powder Diffraction and X-Ray Photoelectron Spectroscopy” J. Raman Spectroscopy (1997) 28,105-109. 80.

P. Bruno, M. Caselli, M. L. Curri, P. Favia, C. Laganara, A. Traini “Surface Examination of Red Painting on Medieval Pottery from South of Italy” Annali di Chimica (1997) 87, 539-553.

81.

P. Bruno, M. Caselli, M. L. Curri, P. Favia, R. Lamendola, C. Laganara, A. Mangone, A.Traini "XPS, ICP, DPASV Analysis of Medieval Pottery. Statistical Multivariate Treatment of Data"Fresenius J. Anal. Chem. (1994) 350, 168-177

not JCR paper 82.

C. Ingrosso, A. Panniello, R. Comparelli, M. L. Curri, M. Striccoli “Colloidal Inorganic Nanocrystals based Nanocomposites: Functional Materials for Micro and Nanofabrication” (2010) Materials, 3, 1316-1352

83.

E. Bianchino, S. Piotto, F. Mavelli, M. L. Curri, M. Striccoli “DPD simulations of PMMAOleic acid mixture behaviour in organic capped nanoparticle based polymer nanocomposite” (2009) Macromol. Symp. 2009, 286, 156–163.

International Conference Proceedings 84.

C. Ingrosso, G. Bianco, P. Lopalco, M. L. Curri, A. Agostiano, A. Corcelli, G. Bruno, M. Striccoli, P. Siciliano “Surface chemical functionalization of single walled carbon nanotubes by mutated Bacteriorhodopsin towards sensing applications” IEEE IWASI 2011

85.

M. Corricelli, M. Striccoli, R. Comparelli, M. L. Curri “Colloidal chemistry routes for fabrication of nanoparticle-based metamaterials” Proc. SPIE vol. 7711, Metamaterials V, N. P. Johnson; E. Özbay; R. W. Ziolkowski; N. I. Zheludev Eds, 2010, 77111A-1-77111A-7

86.

Panniello A., Curri M. L., Placido T., Reboud V., Kehagias N., Sotomayor Torres C. M.; Mecerreyes D., Agostiano A., Striccoli M. “Au Based Nanocomposites Towards Plasmonic Applications” AIP Conference Proceedings 2010;1255(1):92 – 94

87.

Binetti E., Ingrosso C., Striccoli M., Cosma P., Agostiano A., Kim J. Y., Brugger J., Curri M. L. “Conjugated Polymer and Luminescent Nanocrystals for Ink-Jet Printing” AIP Conference Proceedings 2010;1255(1):89 – 91

88.

C. Ingrosso, M. Striccoli, A. Agostiano, E. Sardella, S. Keller, G. Blagoi, A. Boisen, M. L. Curri “Surface Functionalization of Micro Mechanical Cantilever Sensors by Organic Capped TiO2 and Fe2O3 Nanocrystals” Procedia Chemistry 1 (2009) 32–35, Proceedings of the Eurosensors XXIII Conference 6- September 2009 Lausanne (Switzerland)

89.

C. Ingrosso, C. Martin, A. Llobera, F. Perez Murano, C. Innocenti, C. Sangregorio, A. Voigt, G. Gruetzner, J. Brugger, M. Striccoli, A. Agostiano, M. L. Curri “Magnetic Nanocrystals Modified Epoxy Photoresist for Microfabrication of AFM probes” Procedia Chemistry 1 (2009) 580–584, Proceedings of the Eurosensors XXIII Conference 6- September 2009 Lausanne (Switzerland)

90.

Kim, J.Y., Fakhfouri, V., Ingrosso, C, Striccoli, M., Curri, M.L., Brugger, J “Drop-on-demand ink-jet printing of functional materials: case studies of SU8 and NC based polymer nanocomposites” (2008) International Conference on Digital Printing Technologies, 269-273.

17

Maria Lucia Curri _____________________________________________________________________________________

91.

Bianchino, E., Piotto, S., Concilio, S., Sciancalepore, C., Curri, M.L., Agostiano, A., Striccoli, M., Mavelli, F. “Investigation of morphology of nanocrystal based nanocomposites. Theoretical and computational analysis” IV International Conference Times of Polymers (ToP) and Composites; AIP Conference Proceedings vol. 1042, 2008, 261-262

92.

Reboud, V.; Kehagias, N.; Zelsmann, M.; Striccoli, M.; Tamborra, M.; Curri, M.L., Agostiano, A.; Reuther, F.; Gruetzner, G.; Alducin, J.A.; Mecerreyes, D.; Torres, C.M.S. “Nanoimprinted photonic component for light extraction applications” Microprocesses and Nanotechnology, 2007 Digest of papers (2007) 20th International Microprocesses and Nanotechnology Conference, MNC, art. no. 4456279, pp. 412-413.

93.

R. Comparelli, A. Panniello, M. Corricelli, E. Fanizza, M. Striccoli, G. Mascolo, V. Locaputo, A. Agostiano, M. L. Curri “Colloidal nanocrystal films as catalysts for environmental applications” Proceeding of RILEM Symposium 2007 Edited by Baglioni and Cassar RILEM publication SARL, Bagneux 259-266.

94.

A. Panniello, R. Comparelli, D. Diso, A. Licciulli, G. Mascolo, A. S. Franza, M. Striccoli, A. Agostiano, M. L. Curri “Semiconducting nanocrystalline films for environmental photocatalysis: effect of the substrate type/composition and deposition techniques” Proceeding of RILEM Symposium 2007 Edited by Baglioni and Cassar RILEM publication SARL Bagneux, 65-75.

95.

M. Tamborra, R. Comparelli, M. L. Curri, M. Striccoli, A. Petrella. A. Agostiano “Hybrid Nanocomposites Based On CdS and CdSe Colloidal Nanocrystals In Organic Polymers” Proc. SPIE vol. 5838, 236-244, Nanotechnology II, P. Lugli Ed. 2005.

96.

N. Depalo, R. Comparelli, M. Striccoli, M. L. Curri, L. Catucci, A. Agostiano “Water Phase Transfer of Oleic Capped Semiconductor Nanocrystals Mediated by α-Cyclodextrins Proc. SPIE vol. 5838, 245-251, Nanotechnology II, P. Lugli Ed. 2005.

97.

M.G. Manera, M. L. Curri, D. Cozzoli, G. Leo, L. Vasanelli, A. Agostiano, R. Rella “Colloidal TiO2 rod and dot based thin films for chemical sensors based on Surface Plasmon Resonance” Proc. SPIE Vol. 5836, 27-34, Smart Sensors, Actuators, and MEMS II; C. Cane Ed. 2005.

98.

M. L. Curri, M.G. Manera, P. D. Cozzoli, G. Leo, L. Vasanelli, A. Agostiano, R. Rella “TiO2 dot and rod nanocrystals for S ed sensing applications” Proceeding of XVIII Eurosensors Conference Rome 13-15 September 2004.

99.

M. L. Curri, A. Agostiano, M. Della Monica, G. Leo, M. Lomascolo, L. Vasanelli "Structural, optical and chemical properties of ZnS and CdS nanoparticles obtained by an improved colloidal chemistry synthetic route." Proceedings MRS 2001 Spring Meeting (2001) Vol. 676, Y2.4.1-6.

Book Chapters 100.

C. Ingrosso, M. Striccoli, Agostiano, M. L. Curri “Surface functionalized inorganic colloidal nanocrystals in functional nanocomposite materials for microfabrication” in “Molecules at work” Edited by B. Pignataro, Wiley VCH (2011) in press

101.

M.Striccoli, M. L. Curri, R. Comparelli “Nanocrystal based polymer composites as novel functional materials" in “Toward Functional Nanomaterials” Series: Lecture Notes in Nanoscale Science and Technology , Vol. 5 Wang, Zhiming M. (Ed.) Springer 2009 ISBN: 9780-387-77716-0

102.

M. L. Curri, R. Comparelli, N. Depalo, E. Fanizza, M. Striccoli “Patterning and Assembling of Inorganic Nanocrystals” in Nanomaterials: Inorganic And Bioinorganic Perpectives Edited by

18

Maria Lucia Curri _____________________________________________________________________________________

C. M. Lukehart and R. A. Scott, Chichester, 2008 UK John Wiley & Sons, Ltd, pp 327-356 ISBN: 978-0-470-51644-7 103.

Comparelli, M. L. Curri, P. D. Cozzoli, M. Striccoli “Optical Biosensing Based on Metal Semiconductor Colloidal Nanocrystals” in Nanomaterials for Biosensors Vol. 8 Nanotechnologies for the Life Sciences Edited by C. S. S. R. Kumar WILEY-VCH, Weinheim 2006 pp 123-174. ISBN-10: 3-527-31388-5, ISBN-13: 978-3-527-31388-4

104.

P .Bruno, M. Caselli, M. L. Curri, R. Laviano, A. Mangone, D. Manigrassi, A. Traini “Indagine archeometrica sui materiali: caratterizzazione chimico-fisica dei rivestimenti, dei pigmenti e dei corpi ceramici” in La ceramica medievale di Castel Fiorentino. Dallo scavo al museo Adda, Bari 2004 107-129. ISBN: 8880825615, ISBN-13: 9788880825616

Publications on National Journals and Conference Proceedings 105.

A. Petrella, C.Ingrosso, M. L. Curri, P. Cosma, M. Striccoli, S. Rochira, M. Putrella, G. Boghetich, A. Agostiano “Nanocrystals Applied To Energy Photo-Conversion:The Role Of The Sensitizer” Proceedings VIII AIMAT Conference Palermo (Italy) 27 June - 1 July 2006.

106.

Petrella A., Cozzoli P. D., Tamborra M., Curri M. L., Striccoli M., Cosma P., Farinola G.M., Babudri F., Naso F., Petrella M., Agostiano A. “Studio dei sistemi ibridi costituiti da semiconduttori inorganici nanostrutturati e polimeri organici per applicazioni nel campo della fotoconversione dell’energia” Proceedings VII AIMAT Conference Ancona (Italy) 29 June - 2 July 2004.

107.

B. D’Aresta, C. Giannotta, A. Mangone, M. L. Curri, R. Laviano, C. Laganara, P. Bruno, M, Caselli, A. Traini. “Ritrovamenti ceramici medievali dal sito archeologico di Siponto aspetti tecnologici e provenienza: influenze mediorientali” Proceedings 7th Archaeometry of Ceramic Day 2003 Lucera (Foggia- Italy).

108.

Caselli M., Curri M. L., Traini A., Laganara L., Mangone A., Spagnolo V. “Caratterizzazione del rivestimento e delle decorazioni in reperti di ceramica “protomaiolica” nell’Italia meridionale: individuazione di una nuova tipologia” Proceedings 3rd Archaeometry of Ceramic Day Faenza (Bologna – Italy) 30 March 1999, University Press Bologna, 49-57.

109.

Striccoli R., Pennetta L., Curri M. L., Traini A. “Ciotolo dipinto di età neolitica” Archivio Storico Pugliese, (1999), LII, 209-225.

110.

Bruno P., Caselli M., Curri M. L., de Gennaro G., Mangone A., Traini A. “Un modello per la diffusione di CO prodotto da traffico autoveicolare per la città di Bari” Inquinamento (1999), 11, 34-37.

111.

Agostiano A., Curri M. L., Della Monica M. “Synthesis and characterization of Q-sized CdS particles in a four-components “water in oil” microemulsion” Proceedings of the Eighth Meeting “Syntheses and Methodologies in Inorganic Chemistry” Brixen (Bolzano - Italy) 15-18 December 1998, ed. Daolio S., Fabrizio M. et al., vol. 8, 261-264.

112.

Curri M. L “Archeometria della Ceramica Mediterranea” PhD Thesis Bari (Italy) 1997.

113.

Curri M. L., Laganara C., Traini A. “Un minerale prezioso in oggetti di uso comune. Contributo archeometrico allo studio di alcune ceramiche medievali del sito di Castel Fiorentino” Atti 18° Convegno Nazionale Preistoria, Protostoria e Storia della Daunia: “La Capitanata tra medioevo ed età moderna (secc. XIII-XVII) San Severo (Foggia - Italy) 29-30 November 1997.

114.

Bruno P., Caselli M., Curri M. L., Favia P., Laganara C., Traini A. “Medieval pottery in

19

Maria Lucia Curri _____________________________________________________________________________________

Southern Italy: an archaeometrical approach” Proceedings of 1st International Congress on: “Science and Technology for the Safeguard of Cultural Heritage in the Mediterranian Basin” Catania, 27 November - 2 December 1995, vol. 1,771-776. 115.

Bruno P., Caselli M., Curri M. L., Traini A. “Il rosso in alcuni esempi pugliesi di ceramica 'RMR' e 'graffita'” Faenza LXXXI (1995), 3-4, 182-196.

20