Creating Additive Value HIGH PERFORMANCE WETTING AGENTS for indirect food contact applications

METOLAT® 775 and 780  Provide significant reduction in Equilibrium and dynamic surface tension  HLB value of 9

 Enhanced substrate wetting & film quality  Low to no foaming tendency  Non-ionic  Cost effective  APEO free wetting agents for a wide range of indirect food contact coating and ink applications. White Ink Example

(a) Contains defoamer

(b) Contains defoamer + 0.5% METOLAT 780 Visit our website for more information… www.munzing.com

Creating Additive Value METOLAT® 775 and 780 can be used in the following indirect food contact applications, subject to the limitations noted below. 21 CFR 176.170 The product can be used as a component of the uncoated or coated food-contact surface of paper and paperboard in compliance with 176.170. 21 CFR 176.180 The product can be used as a component of the uncoated or coated food-contact surface of paper and paperboard in compliance with 176.180. CALIFORNIA PROPOSITION 65 This product does not contain any chemicals known to State of California to cause cancer, birth, or any other reproductive defects, at levels which would require a warning under the statute. Compliant with: NESTLÉ STANDARDS ON MATERIALS IN CONTACT WITH FOOD (GI-80.008) SWISS ORDINANCE ON MATERIALS AND ARTICLES IN CONTACT WITH FOOD (SR 817.023.21)

The quantity of any wetting agent employed in the production of the specific food contact article shall not exceed the amount reasonably required to accomplish the intended effect in the article and shall not be intended to accomplish any effect in food.

Visit our website for more information… www.munzing.com

Creating Additive Value

TAFIGEL ® PUR ASSOCIATIVE THICKENERS - HEUR – Hydrophobically modified ethoxylated urethanes - Wide range of viscosity profiles

NEW PRODUCT SPOTLIGHT TAFIGEL PUR 48 

40% active content



APE and organo-tin free



Medium to strong thixotropic rheology profile



Improved viscosity stability against glycols and surfactants

TAFIGEL PUR 52

PUR 60, PUR 61, PUR 64, PUR 65 PUR 40, PUR 41,PUR 44, PUR 48, PUR 50 PUR 45, PUR 55, PUR 80,, PUR 82, PUR 85

TAFIGEL PUR 82 

Newtonian rheology profile



VOC, APE and organo-tin free



Suitable for curtain coating and roller application



20% active content



APE and organo-tin free



Medium thixotropic rheology profile



Low product viscosity>>easy to handle  

Addition without predilution Suitable for indirect food contact applications, like printing inks and adhesives

Visit our website for more information… www.munzing.com

Creating Additive Value

EDAPLAN® Polymeric Dispersants Properties

EDAPLAN 490  Organic pigments especially Azo pigments  Carbon blacks  Inorganic pigments  Titanium dioxide Delivery Form approx. 40% in water nonionic

EDAPLAN 492

EDAPLAN 494

 Carbon blacks

 Titanium dioxide

 Organic pigments

 Inorganic pigments

 Titanium dioxide

 Transparent/nano scaled pigments

 Silica matting agents

 Laked Azo pigments

Delivery Form approx. 35% in water  Organic pigments nonionic

 Carbon blacks  Alternative to Dispersing Resin Delivery Form approx. 50% in water nonionic Visit our website for more information… www.munzing.com

Creating Additive Value

EDAPLAN® Polymeric Dispersants Advantages  Universal use for organic and inorganic pigments  High color strength development  Good pigment stabilization, no Rub-out problems  No foam formation  Reduction of grind viscosity  No influence on coatings properties like water resistance, film hardness, scrub resistance  High pigment concentration with low dosage level  Broad compatibility with various binders

Visit our website for more information… www.munzing.com

Creating Additive Value

CERETAN MX 2919 A proprietary blend of micronized wax

Properties  matting agent with clarity  improved slip and anti blocking  improved sandability  improved scratch resistance  nice haptic effect (soft-feel) in wood coatings

Advantages  Guaranteed maximum particle size and constant and narrow particle size distribution  easy to incorporate Minimum Particle Size

Drop Point

140°C

Maximum

Method

99% < 19 μm 50% < (9 μm)

LV 5 (ISO 13320)

146 °C

LV 12 (DGF M-III 3)

Also available in Aqueous Dispersion Form – LUBA-print 914/A Visit our website for more information… www.munzing.com