Cornell Pumps Europe

Mining

Agriculture

Food

EFFICIENT BY DESIGN

Company Profile

Efficiency, Safety, Longevity Energy efficiency Cornell Pumps are designed to deliver best in class efficiency offering the most cost effective and

8H - 88% efficient 6RB - 89% efficient 5RB - 86% efficient 4RB - 85% efficient

Cornell Pump Company quality and innovation since 1946

BBA Pumps, servicing the market for over 60 years

Cornell has been manufacturing pumps in Portland,

BBA Pumps BV has been operating as a dedicated

Oregon since 1946; pumps for a wide variety of agricul-

supplier of pumps and affiliated equipment for over

Cycloseal

Auto prime pumps

tural, municipal and industrial applications. The Cornell

60 years. Being a Dutch company, we at BBA know how

Cornell’s Cycloseal design has

The priming system was specifically designed with the

pumps are known for their robust design, long life and

to keep our (and your) feet dry, no matter what.

proven itself in the toughest

environment in mind. By using a positive sealing float

low cost of ownership. It is the pump of choice for those

For over half a century we have been supplying

applications from manure slurry

box and a diaphragm vacuum pump, there is absolutely

that require trouble free performance.

pumping solutions to the industrial, agricultural,

to starch recovery to sewer bypass

no water carry-over to contaminate the environment.

construction and dewatering markets through-out the

and mining applications - in

Cornell pumps are designed with the suction larger than

world. We can provide you with anything ranging from

some cases more than tripling the

Cornell built their worldwide reputation on quality and

sustainable technology available in the market.

the discharge. This provides more flow due to reduced

reliability. The Cornell centrifugal pumps are engineered

an off-the-shelf pumping solution to a purpose built

normally expected mechanical seal life. The Cycloseal

friction losses. Suction lifts of 8,5 mwc and heads of up

and manufactured to provide continuous and trouble-

dewatering- or fluid management system that meets

system requires no external water, flush, filters, greas

to 250 mwc are possible depending on suction losses

free operation. As a matter of fact, many Cornell pumps

your exact specifications.

cups, piping or instrumentation normally associated

and operating points on the pump curve.

®

with packing or double mechanical seals.Longer seal life

sold in the 50’s are still providing the same continuous and dependable service they did the day they were

In 2006, the cooperation between BBA and Cornell

which translates into less pump down time and lower

Double volute design

installed. No one is more committed to making your

started when the first Cornell pumps were built in BBA

maintenance costs.

The double volute system enables Cornell single-stage,

ownership a truly rewarding experience than Cornell.

Pumps canopies. The cooperation intensified through the years and nowadays BBA Pumps represents this global brand throughout Europe and Russia.

end-suction centrifugal pumps to easily perform big

External hydraulic balance line

volume and high pressure jobs. On single volute pumps,

Cornell’s external hydraulic

and creates unbalanced radial forces. By contrast, the

balance line equalizes pressure

double volute system effectively balances these forces

between the impeller hub area

around the impeller to reduce shaft flexure and fatigue

and the pump suction to reduce axial loading acting on

for longer seal life, bearing life and shaft life.

the increasing pressure acts against the impeller area

the impeller, shaft and bearings. The balance line also assists in moving sand and silt from the stuffing box to the low pressure area at the pump suction, reducing wear of the wetted parts.

2

3

Food Process Pumps

PACKING

LARGE, DEEP STUFFING BOX WITH PACKING, OPTIONAL LANTERN RING AND GREASE CUP

LIP SEALS

BACK-TO-BACK FOR ADDITIONAL MOISTURE RESISTANCE

Hot Cooking Oil

SINGLE PORT IMPELLER THREADED ON TO SHAFT TO ELIMINATE CAMMING

SHAFT

HEAVY STRESSPROOF SHAFT

WEAR RING

REPLACEABLE SUCTION WEAR RING

SMOOTH ENTRANCE VANE ANGLE

BEARINGS

OVERSIZED BEARINGS FOR AN AVERAGE BEARING LIFE OF OVER 100,000 HOURS

SLEEVE

REPLACEABLE SHAFT SLEEVE OF AISI 416SS OR AISI 316SS

VOLUTE

“EXPANDED” OFFSET VOLUTE FOR REDUCED PRODUCT DAMAGE

Pump series: 3NLP-12NHPP Cornell Engineers understand the important role food handling pumps play in today’s marketplace. Our innovative single port impeller configuration with unique offset volute provides the end user with a food handling pump capable of transporting even the most delicate food products. At Cornell, we’ve built our

Quality materials

Pump series: HH-R-Y

Cornell’s food handling pumps are available in all iron,

Enhanced vapor handling and improved

all stainless steel or all iron with stainless steel impeller.

sealing technology are central to Cornell’s

Standard features include: dual-plane and dynamically

latest hot cooking oil pump innovations.

balanced impellers, heavy-duty shafts with replaceable

When fresh product passes through a

shaft sleeves and replaceable suction wear rings. Other

fryer, water tends to travel along the

materials of construction are available as an option for

bottom of the fryer in a liquid phase at

abrasive or caustic applications.

392°F (200°C), until it reaches the pump suction where the action of the impeller breaks

Features and benefits

up the water into smaller droplets that flash into steam.

• Reduced product damage through offset volute

Ordinarily, entrained steam would impair the pump’s

and single vane impeller.

head and flow, but Cornell’s innovative anti-cavitation

• No product contamination.

system prevents this situation.

Hot Cycloseal®

• Low cost of repair.

The ‘Hot Cycloseal®’ combines the high temperature

• Heavy stressproof steel shaft (cycloseal design

capability of the metal bellows seal with the optimized

available).

operating environment of the Cycloseal® system.

• Oversized bearings, extended bearing life.

The ‘Hot Cycloseal®’ system prevents accumulation of solids and vapor near the seal faces and eliminates hot

worldwide reputation on quality and reliability.

20

10

TOTAL DYNAMIC HEAD

30

125

100

12NHPP

100

80

6NHPP

75

60 4NMP

50

6NHP

3NLP

25 0 10

4NMPP

25 5

50 10

100

CAPACITY 20

40

250

500 80

40

10NHPP

20

8NHPP

1000

2500

5000 10000

U.S. GALLONS PER MINUTE

160

320

640

1280

CUBIC METERS PER HOUR

4

400

120

150 40

500

140

TOTAL DYNAMIC HEAD

50

Vapor suppression line.

FEET

Higher heads available with increased speed (consult factory).

175

METERS

FEET

METERS

spots by maximizing cooling flow around the seal.

VARIABLE 2000 / 2400 RPM

300

1800 RPM

200

100

0

Optional segmented bushing for steam quench systems.

1200 RPM

0

1000 200

2000

3000

CAPACITY

400

600

4000 800

5000

6000

U.S. GALLONS PER MINUTE

1000

1200

1400

CUBIC METERS PER HOUR

Seal is elastomeric or metal bellows type: 750ºF (398ºC). Standard construction runs up to 400ºF (204ºC).

5

Irrigation Pumps

Manure Pumps

Pump series: HH-R-Y All Cornell irrigation pumps are constructed with top quality materials. Cornell irrigation pumps are cast iron, bronze fitted or all iron construction. Optional materials are available for abrasive or caustic applications. Standard features include balanced impellers, heavyduty shafts, replaceable shaft sleeves and replaceable wear rings.

Features and benefits • Double volute. • External balance line. • Fully machined impellers. • Repleceable shaft sleeves. • High efficiency. • High suction lift. • Oversized bearings, with minimum of 20.000 life hours.

20

with hard face mechanical seals for extended seal life.

With the unique impeller designs and cutter blade

Optional materials are available for abrasive

options, Cornell has a model that fits your specific

applications.

FEET

140

300

80

VARIABLE 2000 / 2400 RPM

60

200

40

1800 RPM

400 8

350

20

1200 RPM

0

1000 200

2000

3000

CAPACITY

400

600

4000 800

5000

6000

11

7

250

23

200

1000

1200

1400

12

6

150

15 5 4

50 0

2

16

3

2

50

4

x 100 100

6

8 10

2

CAPACITY

200

20 25 24

19 10

400

22

18

17

14

9

1

1

U.S. GALLONS PER MINUTE

CUBIC METERS PER HOUR

13

300

100

100

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.

450

TOTAL DYNAMIC HEAD

100

0

6

handling pumps for the toughest manure applications.

120

TOTAL DYNAMIC HEAD

40

Cornell manure slurry pumps are all iron construction

400

120

60

Cornell offers over 60 models of heavy duty solids

METERS

FEET

METERS

500

140

80

Materials of construction

application.

• Lower operating cost.

100

Pump series: NHTB

27 26

21

4

x 1000 800

6

8 10

2

3NT 3NNTL 4NNTL 4NNT 4NHTA 4414T 4NHTB 4514T 6NHTA 6NNT 6NHT/TH 6NHTB 6NHTB19 8NNT 8NHTA 8NHTH 8NHTR 10NNT 10NHTB 10NHTA 12NHTL 12NHTM 12NNT 14NHG 14NHGA 16NHGH 16NHG22

900-1800 900-1800 900-1800 900-1800 900-1800 800-1800 900-1800 1200-2300 900-1800 900-1800 600-1200 900-1800 900-1800 900-1800 600-1200 600-1200 900-1800 1200-1800 550-1200 900-1200 900-1200 900-1200 1200-1900 900-1200 900-1200 600-1200 900-1200

4

x 10000

U.S. GALLONS PER MINUTE

1600

3200

6400

CUBIC METERS PER HOUR

7

High Head Mining Pumps

Slurry Pumps

Pump series: MX-H-RB

• High Operating Pressures.

Pump series: 2SP-12SP

Designed to handle high head applications while

• High Flow Requirements.

The SP Series incorporates double-casing design, with

providing a long service life. The high head MX series

• Dependable, High Quality Construction.

replaceable liners and impellers available in both

pumps have multi-vane, enclosed impellers designed

• Available in diesel engine driven and

chrome iron and rubber. This SP slurry pump offers a

for industry leading efficiency. The MX series pumps

electric drive styles.

Cornell solution to abrasive applications throughout the

have extra heavy wall thickness, high quality construc-

• Impeller wear ring optionally hardened to

mill process.

tion, CA-6NM impellers and are available in a horizontal

375-425 BNH.

frame & SAE engine mounted configurations.

• Volute wear ring optionally hardened to

Features and specifications

450-500 BHN.

• Max. flow up to 3.000 m3/hour.

• Double angular contact thrust bearings.

• Max. pressure up to 65 mwc.

• 17-4Ph stainless shaft.

• Liner material: chrome iron or rubber.

• Automatic priming and re-priming.

• Double Volute System (DVS).

• Back plate: chrome iron.

• High suction lift capability up to 8,5 mwc.

• Dynamically balanced Impellers.

• Impeller type: enclosed.



Features and benefits

• Heads of up to 25 bar are possible.

• Patented Cycloseal® and Run-DryTM options. • Two-year warranty.

• Seal type: Gland packing or Cycloseal. These high head dewatering pumps offer discharge

• Discharge size: 2” to 12”.

pressures of up to 25 bar. The multifunctional pumping systems find their use in general rental-, industrialand construction applications. Particularly suitable for use as booster pumps or emergency pumps these units

MWC

PSI

are typically used for clean water applications.

220

90

TOTAL DYNAMIC HEAD

140

300

MX SERIES 200 H SERIES

130

RB SERIES

0

1000

2000

3000

4000

5000

CAPACITY

225

450

6000

7000

U.S. GALLONS PER MINUTE

675

900

1125

1350

1600

CUBIC METERS PER HOUR

8

9

Municipalities

Cornell Pumps Europe

Flow up to 10.000 m3/hour

Sales & communications

Cornell Solids Handling pumps are used for waste water,

years’ experience in the market and are at your service

sludge, sewer systems, stringy material, de-watering,

in 7 different languages if you require any assistance

abrasive transfer, canneries, construction, dredging,

with technical and commercial questions about pumps

lumber mills, slush ice, reclamation plants and foundry

and complete pumping installations.

We have a large team of professionals with over 60

or mill slag. Available with Delta™, Semiopen, Enclosed, and Chopper impellers, Cornell pumps are ranging from

Genuine spare parts in stock

3 to 30 inches, with rates of up to 10.000 m /h.

In addition to the usual European pump types we also

3

stock a wide range of genuine spare parts.

Cutter pumps The cutter pump was created in order to address the urgent need of reducing clogging due to ragging. With the increased use of ‘flushable’ materials and extra-neous cleaning products, the issue of clogging— leading to downtime, pump destruction, and pipe damage, has increased markedly.

Aftersales service and product support Features and benefits • Minimal Energy Consumption. • Designed to break up clogs/ Prevent Ragging. • Hardened cutter material. • Adjustable. • The cutter impeller can be retrofitted on existing pumps, and won’t change the external pump

• Dedicated customer help-desk (24h service). • Optional European on-site servicing. • Single supplier for pumps, parts & spares. • Dedicated service department in-house. • Optional European on-site servicing.

Logistics Deliveries of pumps and parts are dispatched from our central warehouse in the Netherlands using our own transport throughout Europe on fixed days.

dimensions. All this to make sure your pump is up and running in no time if things come to a standstill, planned or otherwise!

10

11

The Cornell product line

Cornell Pumps Europe Edisonstraat 12 Postbus 498 7000 AL Doetinchem The Netherlands p +31 (0)314-368 436 f +31 (0)314-378 403 e [email protected] i www.cornellpumpseurope.com