COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name
Contractor
Job Location
Wholesaler
Engineer
Streamline® Rep
Product Description: Streamline® Wrot Copper Pressure and DWV fittings for use in plumbing or mechanical applications. Available sizes ranging from ¼” to 8” in diameter, all wrot copper solder joint fittings shall be manufactured in the United States. Product is designed to join ASTM B88 and ASTM B280 Seamless Copper Tube. Material: Streamline® Wrot Copper fittings shall be made from material in compliance with ASTM B75 and of UNS C12200 grade of copper. Key Specifications: Streamline® Wrot Copper, solder joint, pressure fittings shall conform to the NSF/ANSI 61 Annex G requirements. Wrot copper pressure fittings shall be manufactured to meet ASME B16.22 and MSS SP104. Wrot DWV copper fittings shall be made to meet ASME B16.29. All threaded fittings conform to ASME B1.20.1. Installation: Installations shall comply with the latest applicable building codes for the local jurisdiction. For detailed installation instructions, consult the Copper Developement Association at copper.org. References: NSF/ANSI 61Annex G ASTM B75 C12200 ASME B16.22 MSS SP104 ASME B16.29 ASME B1.20.1
Safe Drinking Water Act (third party certification) Seamless Copper Tube 99.9% pure copper Wrot Copper and Copper Alloy Solder Joint Pressure Fittings Wrot Copper Solder and Joint Pressure Fittings Drain, Waste and Vent (DWV) Fittings Threaded Fittings
Other Applicable Standards: ASTM B88 ASTM B280
Seamless Copper Water and Gas Tube (Types K, L, M) Seamless Copper Tube for Air Conditioning and Refrigeration
Copper [tube or fitting] UNS C122000 has been evaluated by NSF International to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may require corrosion control to limit leaching of copper into the drinking water.
MADE IN USA
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 1 of 8
COPPER FITTINGS – PLUMBING SOLDER JOINT PRESSURE & DWV ADAPTER FEMALE WC-402 Part
ADAPTER (CONT.)
Size
W 01207 W 01215 W 01225 WB01231 WB01246 WB01263 W 01271 W 01279 W 01287 W 01296 W 01297
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
W 01204 W 01205 W 01206 W 01214 W 01216 W 01223 W 01224 W 01226 WB01230 W 01232 W 01233 W 01238 W 01239 W 01245 W 01247 W 01261 W 01264 W 01265 W 01270 W 01272 W 01278 W 01280 W 01288
1/8 x 1/2 x 3/8 x 1/4 1/4 x 3/8 x 1/8 3/8 x 3/4 x 1/2 x 1/4 1/2 x 3/4 x 3/8 x 1/4 5/8 x 3/4 x 1/2 3/4 x 1 x 1/2 1 x 1-1/4 x 3/4 x 1/2 1-1/4 x 1-1/2 x1 1-1/2 x 2 x 1-1/4 2 x 1-1/2
Box
100 50 50 50 25 10 10 10 -
1
Ctn
2
W 01113 W 01114 W 01116 W 01123 W 01124 W 01126 W 01129 WB01130 W 01132 W 01133 W 01138 W 01139 W 01145 W 01147 W 01161 W 01162 W 01164 W 01165 W 01170 W 01172 W 01173 W 01178 W 01180 W 01181 W 01188 W 01189 W 01197 W 01198
Wt
1500 750 750 500 250 100 100 100 50 25 15
0.04 0.04 0.07 0.10 0.14 0.25 0.45 0.53 0.57 1.22 1.83
300 700 900 750 1500 300 500 750 250 500 500 500 500 250 250 100 250 200 100 100 60 50 50
0.10 0.05 0.04 0.06 0.03 0.16 0.10 0.06 0.16 0.07 0.06 0.15 0.09 0.27 0.11 0.28 0.22 0.25 0.50 0.33 0.74 0.39 0.74
REDUCING
100 100 100 50 100 50 50 50 25 50 50 50 50 25 25 10 25 20 10 10 5 5
Part
W W W W W W W W
01525 01531 01546 01563 01571 01579 01587 01596
FTG x F Size
3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Box
50 50 25 25 10 10 -
1
Ctn
Part
W W W W W W W W
2
Wt
750 450 250 250 100 100 50 25
0.05 0.11 0.17 0.24 0.40 0.46 0.65 1.20
01514 01524 01526 01532 01547 01564
1/4 x 3/8 3/8 x 1/2 x 1/4 1/2 x 3/8 3/4 x 1/2 1 x 3/4
50 50 50 50 50 25
750 350 750 750 500 250
0.06 0.10 0.06 0.07 0.11 0.18
MALE WC-401
W 01107 W 01115 W 01125 WB01131 WB01146 WB01163 W 01171 W 01179 W 01187 W 01196 W 01199 W 01150
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Box
50 50 50 50 25 10 10 10 5 -
1
Ctn
2400 1200 500 500 250 100 100 100 50 20 20 16
0.02 0.03 0.06 0.06 0.13 0.24 0.41 0.51 0.57 1.26 1.70 3.71
750 1200
0.06 0.03
REDUCING
W 01105 W 01106
1/8 x 3/8 x 1/4
50 50
0.08 0.06 0.02 0.17 0.09 0.05 0.30 0.17 0.07 0.06 0.14 0.12 0.29 0.12 0.48 0.39 0.17 0.18 0.48 0.24 0.21 0.78 0.37 0.38 0.64 0.57 0.98 0.98
Part
A A A A A A A
Size
3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Box
Ctn
50 50 50 25 10 10 -
0.05 0.09 0.15 0.23 0.41 0.49 0.76 1.95
1/2 x 3/8 3/4 x 1/2 1 x 3/4
50 50 25
750 500 250
0.06 0.13 0.19
Part
W 06000 W 06001 W 06002
Box
Ctn
-
W W W W W W W W W W W W W W W W W W W
01706 01712 01714 01715 01717 01720 01721 01722 01725 01726 01727 01737 01738 01739 01743 01745 01750 01751 01758
FTG
Part
0.22 0.42 0.41
01900 01901 01902 01903 01904 01905 01906 01907 01908 01909 01910 01911 01913
Size
Box
100 100 100 100 100 50 50 50 50 50 50 50 50 25 10 10 10 10 10
Ctn
4000 3400 2400 1500 1500 750 750 750 500 500 500 500 500 250 200 200 100 100 100
Wt
0.01 0.01 0.02 0.02 0.04 0.03 0.06 0.08 0.04 0.07 0.11 0.12 0.18 0.22 0.16 0.30 0.22 0.41 0.68
Size
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4
Box
50 50 50 50 50 25 10 25 25 -
Ctn
Wt
2000 2000 1000 1000 2000 1000 500 250 250 100 50 50 25 20
0.01 0.01 0.02 0.03 0.04 0.08 0.11 0.18 0.30 0.48 0.73 1.15 1.50
CxC Size
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
ROLLED STOP WC-400 Part
1/4 x 1/8 3/8 x 1/4 x 1/8 1/2 x 3/8 x 1/4 5/8 x 1/2 x 3/8 x 1/4 3/4 x 5/8 x 1/2 x 3/8 1 x 3/4 x 5/8 x 1/2 1-1/4 x 1 x 3/4 1-1/2 x 1-1/4 x1 2 x 1-1/2
Wt
0.02 0.04 0.08 0.17 0.25 0.34 0.48
Box
100 50 50 100 25 50 25 25 10 -
Ctn
4000 2000 1700 1000 375 500 250 250 100 75 50 25 15
Wt
0.01 0.01 0.03 0.04 0.06 0.11 0.15 0.25 0.40 0.66 1.03 2.15
COUPLING 2
1
W 07002 W 07004 W 07006 WB07007 W 07008 WB07009 WB07011 W 07012 W 07013 W 07014 W 07015 W 07016 W 07017 W 07018
W W W W W W W W W W W W W
BUSHING FLUSH WC-106
Ctn
1200 1600 450 300 160 90 90
C
NO STOP WC-400NS
Wt
100 50 72
Box
2
1
COUPLING
FTG Size
1/2 x 6 x 12 3/4 x 12
Size
1/2 x 1/4 50 x 1/8 100 3/4 x 3/8 50 1 x 1/2 50 1-1/4 x 3/4 10 1-1/2 x 1 10 2 x 1-1/2 10 CAP
Part
Wt
750 500 500 250 100 100 50 20
07813 07812 07814 07815 07816 07817 07819
FTG X F
WC-415
2
1
0.94 0.92
BUSHING FLUSH WC-417 (BRASS)
AIR CHAMBER
2
Wt
FTG x M
WA-515
Part
CxM Size
01425 01431 01446 01463 01471 01479 01487 01496
W 01432 W 01447 W 01464
ADAPTER Part
500 750 2000 250 500 750 150 250 500 600 250 250 100 250 100 100 100 100 100 100 100 50 100 100 50 50 20 22
REDUCING
REDUCING
W W W W W W
50 50 50 25 50 50 15 25 50 25 25 25 10 25 10 10 10 10 10 10 10 10 10 -
ADAPTER FITTING WC-404
ADAPTER FITTING WC-405
1/4 x 1/2 x 3/8 x 1/8 3/8 x 3/4 x 1/2 x 1/4 1/2 x 1 x 3/4 x 3/8 x 1/4 5/8 x 3/4 x 1/2 3/4 x 1 x 1/2 1 x 1-1/2 x 1-1/4 x 3/4 x 1/2 1-1/4 x 1-1/2 x1 x 3/4 1-1/2 x 2 x 1-1/4 x1 2 x 1-1/2 x 1-1/4 2-1/2 x 2 x 1-1/2
BUSHING (CONT.) x 1-1/4 5 50 2-1/2 x 2 50
W 01759 W 01767
REDUCING
CxF
W 01003 W 01009 W 01017 WB01022 W 01028 WB01034 WB01047 W 01055 W 01063 W 01072 W 01082 W 01092 W 10100 W 10107
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
CXC Size
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4
Box
100 50 50 50 50 25 10 25 10 -
Ctn
4000 2000 1700 1000 500 500 250 250 100 75 50 25 20 15
Wt
0.01 0.01 0.03 0.05 0.06 0.11 0.15 0.21 0.40 0.66 1.03 1.18 2.11
page 2 of 8
COUPLING STAKED STOP WC-400S Part
W W W W W W W W W W W W W W W W W
Size
10141 10143 10144 10145 10157 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10130
W W W W W W
CxC
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8
Box
100 50 50 100 25 50 25 25 10 -
Ctn
Wt
3400 2000 1700 1000 500 500 250 250 100 75 50 25 20 15 8 3 -
0.01 0.01 0.03 0.04 0.06 0.11 0.15 0.22 0.41 0.66 1.02 1.03 2.15 3.34 4.61 14.13
Part
W 01011 W 01019 W 01021 W 01023 W 01025 W 01027 W 01029 W 01030 W 01031 W 01035 WB01036 W 01037 W 01038 W 01049 W 01050 W 01051 W 01052 W 01056 W 01058 W 01060 W 01064 W 01065 W 01067 W 01069 W 01073 W 01074 W 01075 W 01077 W 01079 W 01083 W 01084 W 01085 W 01086 W 01093 W 01094 W 01095 W 10101 W 10108 W 10109 W 10110 W 10111 W 10116 W 10123 W 10124
CxC Size
1/4 x 1/8 3/8 x 1/4 x 1/8 1/2 x 3/8 x 1/4 x 1/8 5/8 x 1/2 x 3/8 x 1/4 3/4 x 5/8 x 1/2 x 3/8 x 1/4 1 x 3/4 x 5/8 x 1/2 x 3/8 1-1/4 x 1 x 3/4 x 1/2 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 2-1/2 x 2 x 1-1/2 x 1-1/4 x1 3 x 2-1/2 x2 x 1-1/2 3-1/2 x 3 4 x 3-1/2 x3 x 2-1/2 x2 5x4 6x4 x3
Box
50 50 50 100 100 100 100 100 100 100 25 50 50 25 25 25 25 10 10 10 10 10 10 10 -
2000 1700 1200 1000 1000 1000 600 600 600 1000 500 500 500 250 250 250 250 100 100 100 100 100 100 100 100 100 100 100 75 50 50 50 50 25 25 25 25 20 20 15 20 1 1 1
Part
COUPLING CROSS OVER WC-412 Part
A 02535 A 02583
CxC Size
1/2 3/4
Box
5 5
Ctn
100 50
Wt
0.12 0.26
45° ELBOW CxC
WE-504 Part
W 03005 W 03012 W 03021 WB03026 W 03030 WB03034 WB03044 W 03050 W 03055 W 03059
Size
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2
Box
50 50 50 50 50 25 10 10 10 10
Ctn
2000 2800 850 500 500 250 200 100 100 50
Size
W 03312 W 03321 WB03326 W 03330 WB03334 W 03344 W 03350 W 03355 W 03359 W 03363 W 03368 W 03373
1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
100 100 50 50 25 25 10 10 5 2 2 -
Ctn
Wt
3400 1500 500 500 250 250 100 100 50 20 10 5
0.01 0.03 0.03 0.06 0.09 0.15 0.24 0.33 0.61 1.05 1.52 3.11
45° ELBOW
Part
W W W W
Size
03621 03626 03634 03644
3/8 1/2 3/4 1
Box
50 50 25 10
Part
Ctn
Wt
1700 750 250 100
0.02 0.04 0.10 0.18 2
1
W 02003 W 02009 W 01617 WB01622 W 02028 WB01634 WB01647 W 02084 W 02085 W 02086 W 02087 W 02088 W 02089 W 02090 W 02096 W 02097 W 02099
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8
Box
50 50 50 50 50 25 10 10 10 10 5 5 2 2 -
Ctn
Wt
2000 1700 750 500 500 250 100 100 100 50 25 25 10 10 1 1 1
0.01 0.02 0.03 0.04 0.08 0.09 0.18 0.30 0.42 0.76 1.19 1.88 2.77 4.00 8.59 13.73 27.00
750 750 500 500 500 500 500 500 500 250 250 250 150 200 100 50
0.02 0.03 0.05 0.05 0.06 0.07 0.11 0.11 0.11 0.17 0.16 0.18 0.20 0.32 0.33 0.60
REDUCING
W W W W W W W W W W W W W W W W
02011 02019 02023 02025 02029 02030 02035 02036 02037 02049 02050 02051 02052 02056 02077 02078
1/4 x 1/8 3/8 x 1/4 1/2 x 3/8 x 1/4 5/8 x 1/2 x 3/8 3/4 x 5/8 x 1/2 x 3/8 1 x 3/4 x 5/8 x 1/2 x 3/8 1-1/4 x 1 1-1/2 x 1-1/4 2 x 1-1/2
50 50 50 50 50 50 50 50 50 25 25 25 25 20 5 5
Part
W W W W W
02715 02716 02717 02722 02728
1
1/8 1/4 3/8 1/2 5/8
Box
50 50 50 50 50
1/4 x 1/8 1/2 x 3/8 x 1/4 3/4 x 5/8 x 1/2 1 x 3/4 1-1/4 x 1 x 3/4 x 1/2 1-1/2 x 1-1/4 x1 x 3/4 2 x 1-1/2 x 1-1/4 x1
50 50 50 25 50 10 10 10 10 5 5 5 2 2 2
3000 1000 1000 250 500 100 100 100 100 50 50 50 20 20 20
0.01 0.04 0.03 0.12 0.09 0.17 0.31 0.37 0.37 0.44 0.52 0.51 0.98 0.94 0.97
Ctn
2000 1700 500 500 500
Wt
0.01 0.02 0.04 0.06 0.09
W 02305 W 02312 W 02321 WB01652 W 02330 WB01654 W 02334 WB02344 W 02384 W 02385 W 02386 W 02387 W 02388 W 02389 W 02390
FTG x C Size
1/8 1/4 3/8 1/2 5/8 3/4 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4
Box
50 50 50 50 25 25 25 10 25 10 10 5 2 1 2
Ctn
2000 1700 750 500 250 250 250 100 125 100 50 25 20 10 10
Wt
0.01 0.02 0.03 0.04 0.09 0.10 0.11 0.22 0.29 0.44 0.77 1.23 1.94 2.78 4.03
90° ELBOW STREET LONG RADIUS WE-503L Part
W W W W W W W W W W W W W
02809 02817 02822 02828 02834 02847 02350 02355 02359 02363 02368 02393 02395
Size
1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4
SHORT RADIUS WE-506 Part
2
CxC Size
0.13 0.27 0.42 0.60 1.23 2.05 3.13 5.53 7.98
FTG x C Box
50 50 50 25 25 10 10 5 5 5 2 1 -
Ctn
1700 500 500 250 250 100 100 50 25 25 10 5 1
Wt
0.02 0.04 0.06 0.09 0.13 0.26 0.42 0.60 1.23 2.08 3.12 5.52 8.07
90° ELBOW
90° ELBOW LONG RADIUS WE-500L
02711 02723 02725 02735 02736 02749 02756 02058 02060 02064 02065 02067 02073 02074 02075
Part
CxC Size
W W W W W W W W W W W W W W W
90° ELBOW (CONT.) 3/4 25 250 1 10 100 1-1/4 10 100 1-1/2 5 50 2 5 25 2-1/2 5 25 3 2 10 3-1/2 1 5 4 1
90° ELBOW
90° ELBOW SHORT RADIUS WE-500
02734 02747 02055 02063 02072 02082 02092 02093 02095
STREET SHORT RADIUS WE-503
FTG x FTG
WE-507
Wt
0.01 0.01 0.03 0.04 0.06 0.09 0.16 0.25 0.36 0.60
Box
W W W W W W W W W
REDUCING
FTG x C
Wt
0.01 0.01 0.02 0.03 0.03 0.03 0.05 0.04 0.04 0.06 0.08 0.06 0.06 0.13 0.11 0.11 0.11 0.20 0.17 0.17 0.23 0.23 0.24 0.22 0.43 0.43 0.46 0.40 0.41 0.65 0.75 0.70 0.71 1.06 1.10 1.01 1.22 1.87 0.76 1.88 1.97 3.31 4.82 4.85
1.00 1.53 2.81 3.14 6.56 10.64
45° ELBOW
2
1
Ctn
45° ELBOW (CONT.) 2-1/2 5 25 3 2 20 3-1/2 2 10 4 5 5 1 6 1
STREET WE-505
COUPLING REDUCING WC-400R
03063 03067 03070 03073 03074 03075
W W W W W W W W W W W W
02612 02621 02626 02634 02644 02684 02685 02686 02687 02688 02689 02690
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
FTG x FTG Size
1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4
Box
50 50 50 25 10 10 5 1 1 1 1 1
Ctn
2800 750 500 250 100 100 50 10 10 10 10 5
Wt
0.02 0.03 0.05 0.11 0.22 0.31 0.43 0.79 1.25 2.08 2.63 3.88
page 3 of 8
90° ELBOW (CONT.) LONG RADIUS WE-506L
RETURN BEND
FTG x FTG
Part
Part
W 02650 W 02655 W 02659
Size
1-1/4 1-1/2 2
Box
Ctn
5 5 1
Wt
50 50 10
0.44 0.63 1.23
FITTING REDUCER
FTG x C
WC-403 Part
W 01306 W 01312 W 01314 W 01315 W 01317 W 01320 W 01321 W 01322 W 01325 WB01326 W 01327 W 01337 W 01338 W 01339 W 01340 W 01343 W 01345 W 01347 W 01350 W 01351 W 01353 W 01355 W 01358 W 01359 W 01360 W 01362 W 01364 W 01367 W 01368 W 01369 W 01370 W 01376 W 01377 W 01378 W 01379 W 01381 W 01382 W 01383 W 01386 W 01387 W 01388 W 01389 W 01390 W 01391 W 01393 W 01394 W 01395 W 01396
Size
Box
Ctn
1/4 x 1/8 50 3/8 x 1/4 50 x 1/8 50 1/2 x 3/8 50 x 1/4 50 5/8 x 1/2 100 x 3/8 100 x 1/4 100 3/4 x 5/8 50 x 1/2 25 x 3/8 50 1 x 3/4 25 x 5/8 25 x 1/2 25 x 3/8 20 1-1/4 x 1 10 x 3/4 10 x 1/2 10 1-1/2 x 1-1/4 10 x 1 10 x 3/4 10 x 1/2 10 2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 2-1/2 x 2 x 1-1/2 x 1-1/4 x1 3 x 2-1/2 x2 x 1-1/2 x 1-1/4 3-1/2 x 3 x 2-1/2 x2 4 x 3-1/2 x3 x 2-1/2 x2 5x4 x3 x2 6x5 x4 x3 HANGER
HI-EAR
2000 2000 2800 750 1700 1000 900 900 500 500 500 250 250 250 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 25 25 50 50 20 20 20 20 15 15 15 1 1 1 1 1 1
2
1
Wt
0.01 0.02 0.01 0.03 0.02 0.04 0.04 0.04 0.06 0.06 0.06 0.11 0.10 0.10 0.10 0.17 0.17 0.16 0.23 0.24 0.23 0.22 0.44 0.43 0.45 0.43 0.42 0.62 0.57 0.62 0.63 1.00 0.89 0.92 1.01 1.28 1.37 1.47 1.74 1.77 1.83 1.86 3.24 2.76 2.66 4.80 4.32 4.49
C
W-124 Part
Size
A 03167 A 03168 A 03171
1/2 3/4 1
Box
100 25 25
Ctn
1000 500 250
Wt
0.03 0.04 0.04
PLUG FITTING WC-416 (SIZES 1/8 THRU 11/2 BRASS ROD) Part
A A A A A A A A
01402 01422 01392 01504 01529 01556 01590 01628
FTG Size
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
Box
50 100 50 50 50 25 15 10
Ctn
500 4000 2000 1200 600 375 180 120
Wt
0.01 0.01 0.02 0.03 0.07 0.12 0.20 0.28
W W W W W W W W W W W W W W W W W W W W W W W W W W W W
06025 06020 06048 06045 06041 06036 06035 06032 06069 06062 06060 06058 06056 06053 06051 06084 06081 06077 06074 06073 06099 06095 06092 60111 60110 60121 60131 60140
TEE (CONT.) REDUCING
CxC
WE-512 Size
Box
1/4 x 4-1/2 x 1-1/2 3/8 x 6 x4 x3 x2 x 1-29/32 x 1-1/2 1/2 x 6 x 3-3/8 x3 x 2-1/2 x 2-1/4 x 1-7/8 x 1-9/16 5/8 x 4 x 3-3/8 x 2-1/2 x 2-1/8 x2 3/4 x 12 x 3-3/8 x 2-1/2 1 x 3-1/4 x3 1-1/4 x 3-3/4 1-1/2 x 4-1/2 2 x 5-1/2
25 25 25 50 50 50 5 10 25 25 25 25 25 10 10 10 10 10 10 5 5 5 5 5
Ctn
150 850 100 200 250 300 300 500 30 100 150 250 250 250 250 120 90 100 100 100 15 100 100 50 50 50 25 25
Wt
0.10 0.02 0.21 0.14 0.11 0.06 0.08 0.06 0.30 0.18 0.16 0.14 0.13 0.11 0.10 0.25 0.24 0.17 0.16 0.15 0.88 0.29 0.23 0.49 0.47 0.65 1.00 1.92
P-TRAP SUCTION LINE WE-554P Part
W W W W W W W
60999 61008 61000 61001 61002 61003 61009
CxC Size
Box
1/2 5/8 3/4 1 1-1/4 1-1/2 2
10 10 5 3 4 4 -
Ctn
50 50 25 15 20 4 3
Wt
0.38 0.51 0.63 0.87 1.16 2.28 3.87
TEE CxCxC
WT-600 Part
W 40306 W 04000 W 04001 WB04006 W 04017 WB04031 WB04048 W 04068 W 04084 W 40102 W 40123 W 40152 W 40190 W 40200 W 40400 W 40500 W 40525
Size
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8
Box
100 50 50 50 25 25 10 5 5 5 2 2 1 1 – – –
Ctn
Wt
2400 1700 500 500 250 200 100 50 50 25 20 10 5 5 1 1 1
0.01 0.02 0.04 0.07 0.12 0.16 0.29 0.42 0.60 1.14 1.72 2.77 5.66 5.99 12.38 20.85 36.81
750 500 500 1700 500 1700 500 500 500 500 500 750 750 750 450 100 250
0.03 0.08 0.04 0.02 0.02 0.02 0.09 0.04 0.04 0.05 0.04 0.04 0.05 0.04 0.05 0.35 0.11
REDUCING
W W W W W W W W W W W W W W W W W
40368 04016 04005 40324 40330 40332 04015 04002 40350 04003 04004 40358 40363 40364 40366 04067 04047
1/8 x 1/8 x 1/4 1/4 x 1/4 x 1/2 x 3/8 x 1/8 x 1/8 x 1/4 x 1/8 3/8 x 3/8 x 1/2 x 1/4 x 1/8 x 1/4 x 3/8 x 1/4 x 1/8 x 1/8 x 3/8 x 1/4 x 1/8 1/2 x 1/2 x 1 x 3/4
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 10 25
W 04029 x 5/8 W 04007 x 3/8 W 04008 x 1/4 W 04014 x 1/8 W 04009 x 3/8 x 1/2 W 04010 x 3/8 W 04011 x 1/4 W 04012 x 1/4 x 1/2 W 40367 x 3/8 W 04013 x 1/4 W 04046 5/8 x 5/8 x 3/4 W 04018 x 1/2 W 04019 x 3/8 W 04020 x 1/4 W 04021 x 1/2 x 5/8 W 04022 x 1/2 W 04023 x 3/8 W 04025 x 3/8 x 5/8 W 04026 x 1/2 W 04027 x 3/8 W 04065 3/4 x 3/4 x 1 W 04032 x 5/8 WB04033 x 1/2 W 04034 x 3/8 W 04035 x 1/4 W 04036 x 5/8 x 3/4 W 04037 x 5/8 WB04041 x 1/2 x 3/4 W 04042 x 5/8 WB04043 x 1/2 W 04044 x 3/8 W 04045 x 1/4 W 40230 x 3/8 x 3/4 W 40231 x 1/2 W 40232 x 3/8 W 40101 1 x 1 x 1-1/2 W 04082 x 1-1/4 WB04049 x 3/4 W 04050 x 5/8 WB04051 x 1/2 W 04052 x 3/8 W 04055 1x3/4x1 W 04056 x 3/4 W 04057 x 5/8 W 04058 x 1/2 W 04059 x 3/8 W 40233 x 5/8 x 1 W 40234 x 3/4 W 40235 x 5/8 W 40236 x 1/2 W 04061 x 1/2 x 1 W 04062 x 3/4 W 04063 x 1/2 W 40122 1-1/4x1-1/4 x2 W 40100 x 1-1/2 W 04069 x1 W 04070 x 3/4 W 04071 x 1/2 W 04072 x 3/8 W 04073 x 1 x 1-1/4 W 04074 x1 W 04075 x 3/4 W 04076 x 1/2 W 04078 x 3/4 x 1-1/4 W 04079 x1 W 04080 x 3/4 W 04081 x 1/2 W 04083 1/2 x 1-1/4 W 40121 1-1/2x1-1/2x2 W 04085 x 1-1/4 W 04086 x1 W 04087 x 3/4 W 04088 x 1/2 W 04089 x 3/8 W 04090 x1-1/4x1-1/2 W 04091 x 1-1/4 W 04092 x1 W 04093 x 3/4 W 04094 x 1/2 W 04095 x 1 x 1-1/2 W 04096 x 1-1/4 W 04097 x1 W 04098 x 3/4 W 40237 x 1/2 W 04099 x 3/4 x 1-1/2 W 40239 x 1-1/4 W 40240 x1
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
25 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
250 500 500 500 500 500 500 500 500 500 250 250 250 250 225 250 225 250 225 250 100 250 250 250 250 250 250 250 150 250 250 225 250 250 250 50 50 100 100 100 100 100 100 90 100 100 100 90 100 90 100 100 100 20 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 50 50 50 50 50 50 50 50 50 50 50 50 50 50 30 50 50 50
0.10 0.08 0.06 0.08 0.09 0.08 0.08 0.09 0.08 0.09 0.15 0.10 0.10 0.10 0.13 0.11 0.11 0.15 0.14 0.11 0.22 0.17 0.12 0.11 0.11 0.19 0.17 0.16 0.17 0.13 0.12 0.15 0.19 0.17 0.12 0.47 0.31 0.24 0.27 0.21 0.19 0.30 0.25 0.43 0.23 0.21 0.33 0.30 0.31 0.35 0.30 0.28 0.21 0.89 0.49 0.41 0.35 0.32 0.29 0.48 0.46 0.38 0.36 0.45 0.46 0.37 0.34 0.57 1.21 0.57 0.52 0.47 0.42 0.41 0.68 0.69 0.57 0.57 0.45 0.68 0.65 0.61 0.56 0.45 0.67 0.75 0.52
page 4 of 8
TEE (CONT.)
TEE (CONT.)
REDUCING
W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W
40238 40243 40244 40153 40144 40103 40104 40105 40106 40107 40108 40109 40110 40111 40112 40113 40114 40115 40116 40117 40118 40119 40120 40245 40247 40248 40249 40124 40125 40126 40127 40128 40129 40130 40131 40132 40133 40134 40135 40136 40137 40138 40139 40140 40141 40142 40143 40220 40250 40251 40252 40253 40254 40255 40221 40256 40257 40258 40259 40222 40151 40150 40149 40148 40147 40146 40145 40159 40158 40157 40156 40155 40154 40167 40165 40164 40163 40162 40161 40174 40181 40178 40179 40198 40197 40196 40195
x 3/4 x 3/4 x 1/2 x 1/2 x 1-1/2 2x2x3 x 2-1/2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x 3/8 x 1-1/2 x 2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x 1-1/4 x 2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x1x2 x1 x 3/4 x 2 x 1/2 x 2 2-1/2 2-1/2 x 2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x 2 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 2-1/2x1-1/2x2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x 1-1/4 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 x 1 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 3/4 x 2-1/2 3 x 3 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 3/4 x 1/2 3 x 2-1/2 x 3 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x2x3 x 2-1/2 x2 x 1-1/2 x 1-1/4 x1 x 1-1/2 x 3 x 1-1/4 x 3 x1x3 x 3/4 x 3 4x4x3 x 2-1/2 x2 x 1-1/2
5 5 5 1 1 5 5 5 5 5 2 2 2 2 2 2 5 2 2 2 2 5 5 5 5 5 5 2 2 2 2 1 1 4 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1
ADAPTER
REDUCING
50 50 50 10 10 50 50 50 50 50 20 20 20 20 20 20 50 20 20 20 20 50 20 25 50 25 25 20 20 20 20 10 10 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 20 10 10 20 20 20 10 10 10 10 10 20 10 10 10 10 10 20 10 10 10 10 5 5 10 10
0.55 0.47 0.66 2.55 1.46 0.99 0.85 0.88 0.83 0.67 0.68 1.31 1.15 0.86 1.06 0.75 0.77 1.30 1.14 1.09 0.95 0.76 0.78 1.64 1.06 1.71 1.66 1.59 1.49 1.87 1.83 1.83 2.05 2.30 1.84 2.09 2.12 2.10 2.06 2.20 2.32 1.84 2.11 2.17 1.83 2.36 2.36 2.35 1.82 2.47 1.96 2.47 2.18 2.47 2.39 1.97 2.15 2.04 2.27 2.41 2.45 2.30 2.18 2.38 1.96 1.49 1.38 2.96 4.52 2.68 2.63 2.62 2.02 3.07 4.64 2.75 2.57 2.61 2.04 2.97 3.14 3.02 3.03 4.94 5.16 4.52 4.47
W W W W W W W W W W W W W W W W W W W W W W
40194 40193 40192 40191 40208 40206 40205 40204 40212 40216 40215 40214 40213 40401 40402 40404 40520 40502 40503 40504 40505 40526
x 1-1/4 x1 x 3/4 x 1/2 x3x4 x3 x 2-1/2 x2 x 2-1/2 x 4 x2x4 x 1-1/2 x 4 x 1-1/4 x 4 x1x4 5x5x4 x3 x2 6x4x4 x6x4 x3 x 2-1/2 x2 8x8x4
1 1 1 1 1 1 1 1 1 1 1 1 1 – – – – – – – – –
10 10 10 10 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1
TRAP DW-757
4.55 3.05 2.89 2.89 8.66 5.12 5.61 4.76 7.79 8.95 8.51 8.57 9.33 6.95 6.25 5.05 12.52 11.00 11.00 11.10 9.54 22.26
Part
1/2 3/4
Box
50 25
Ctn
Part
1/4 3/8 1/2 3/4 1
Box
25 25 25 25 10
A 11407
1-1/2x1-1/4 OD
1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2
Box
100 100 100 100 100 50 50 50 50 50
Size
2 3
x2
Size
0.12 0.11 0.16 0.37 0.52
1-1/2 2
Size
25 Ft.Roll
Box
1
Size
1-1/4
Size
A 07012 A 07054 A 07094
1-1/4 1-1/2 2
W 07235
1-1/4 x 1-1/2
EXTENDED DW-742
ADAPTER
Part
A 11564
Size
1-1/2x1-1/2 OD
Box
10
Ctn
2
1-1/2x1-1/4 OD
10
Part
A 11355 A 11356
100
Size
Box
25 10
Ctn
1
Wt
0.22 0.33
1-1/2x1-1/4 OD
10
200
0.40
Ctn
Wt
100 40
0.43 1.12
50
0.61
5
Box
10 10
1 Ctn
2 Wt
100 100
0.25 0.41
Box
10
Ctn
Wt
100
0.19
Box
25 10 10
Ctn
Wt
250 100 100
0.35 0.44 0.52
10
100
0.37
Box
25 – – – – – – –
Ctn
Wt
250 100 100 50 50 50 25 25
0.11 0.22 0.18 0.47 0.44 0.50 0.89 1.03
CLOSET FLANGE
Part
C x CLOSET Size
3x4 4x4
Box
Ctn
5 5
Wt
50 40
0.83 0.67
COUPLING
2
250 200
Size
1-1/2 x 1-1/4 2 x 1-1/2 x 1-1/4 3x2 x 1-1/2 x 1-1/4 4x3 x2
DW-734
0.26
REDUCING
A 11383
07350 07358 07359 07377 07378 07379 07387 07389
W 07834 W 07844
C x SJ 1-1/4x1-1/4 OD 1-1/2x-1/2 OD
W W W W W W W W
0.28
ADAPTER TRAP DW-724
5 5
FTG x C
Wt
100
REDUCING
A 11566
Box
2
BUSHING
1.63
1
0.53
REDUCING
Part
FTG x SJ
100
CxM
Part
SOLDER JOINT DWV FITTINGS
TRAP DW-724F
10
DW-732
Wt
10
Wt
0.42 0.52
ADAPTER
Wt
0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.04 0.05 0.06
Ctn
Ctn
100 100
FTG x F
DW-754 Part
Ctn
2
ADAPTER
PERFORATED COPPER STRAP A 01211
10 10
CxF
W 07221 W 07222
WS-1101 Part
Box
1
ADAPTER
Part
4,000 5,600 3,400 1,500 2,000 750 750 500 500 500
0.40
C x SPIGOT1
W 07240 Size
01203 01278 01366 02529 01467 02574 02614 02650 02675 02708
1-1/4x1-1/4 OD 1-1/2x1-1/2 OD
W 07112
Wt
250 250 250 150 100
100
REDUCING
Wt
2-HOLE WS-1100 Part
Size
A 11405 A 11406
SOIL PIPE DW-733
COPPER TUBE STRAP
A A A A A A A A A A
10
ADAPTER
0.10 0.19
Ctn
Wt
0.34 0.40
REDUCING
CxC Size
Ctn
100 100
M x SJ
W 07122 W 07133
300 150
10 10
FEMALE DW-753
WC-407 08001 08002 08003 08004 08005
1-1/2x1-1/4 OD
TRAP DW-756
UNION
W W W W W
A 11411
Box
2
ADAPTER
C x FTG x C Size
Part
1-1/4x1-1/4 OD 1-1/2x1-1/2 OD
Part
FITTING WT-600F Part
Size
A 11409 A 11410
1
REDUCING
TEE
W 04106 W 04131
F x SJ
CxC
DW-741 Part
W 07055 W 07063
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
Size
1-1/4 1-1/2
Box
25 25
2
1
Ctn
150 250
Wt
0.09 0.11
page 5 of 8
W 07072 W 07092 W 70107
COUPLING (CONT.) 2 – 100 3 – 50 4 – 25
60° ELBOW
0.13 0.47 1.03
CxC
DW-701
REDUCING
W W W W W W W
07073 07074 07094 07095 07096 70109 70106
2 x 1-1/2 x 1-1/4 3x2 x 1-1/2 x 1-1/4 4x3 x2
– – – – – – –
100 100 50 50 50 25 25
0.17 0.18 0.52 0.52 0.70 0.93 1.38
Part
W 07064 W 07066
Size
Box
1-1/2 3
Ctn
25 2
250 20
Wt
0.35 0.95
22-1/2° ELBOW CxC
DW-703
REPAIR COUPLING Part
Part
W W W W
07907 07908 07909 07911
W 07060
CxC
DW-741NS Size
1-1/4 1-1/2 2 3
Box
25 25 – –
Ctn
0.07 0.11 0.19 0.34
Ctn
–
100
Wt
0.27
CxCxC
DW-707 Part
W W W W
45° ELBOW CxC
DW-204
Box
TEE
Wt
225 250 75 50
Size
1-1/2
07500 07511 07522 07533
Size
1-1/4 1-1/2 2 3
Box
Ctn
20 20 5 –
Wt
100 100 25 10
0.37 0.52 0.85 2.10
10
100
0.51
10 5 5 5 5 5 5
100 50 30 50 25 25 25
0.52 0.75 0.68 0.87 1.69 1.45 0.81
Ctn
Wt
REDUCING Part
W W W W
07420 07421 07422 07423
Size
1-1/4 1-1/2 2 3
Box
25 25 – –
Ctn
Wt
250 125 50 25
W 07510
0.14 0.20 0.33 0.84
W W W W W W W
45° ELBOW (STREET) DW-205
FTG x C
TEST CAP
Part
W W W W
07430 07431 07432 07433
Size
Box
Ctn
Wt
1-1/4 1-1/2 2 3
25 25 – –
250 125 50 25
0.17 0.20 0.32 0.81
Part
W W W W W W W
CxC
DW-200 Part
07400 07401 07403 07404
Size
1-1/4 1-1/2 2 3
Box
25 20 – –
Ctn
Wt
125 100 50 15
0.25 0.24 0.71 1.66
A 07209 A 07202
Box
500 200 100 100 100 50 25
5,000 4,000 2,000 2,000 1,000 1,000 250
0.01 0.01 0.01 0.02 0.04
C x TUBE 1
1
1-1/2 2
1/2 3/4 1 1-1/4 1-1/2 2 3
2
Part
W 70112 W 70111
CxC Size
Size
DW-752 2
Part
07634 07635 07636 07637 07638 07639 07640
VENT INCREASER
90° ELBOW LONG TURN D-700LT
C
DW-798T
90° ELBOW
W W W W
07512 07521 07520 07524 07532 07531 07530
1-1/2x11/2x1-1/4 x1-1/4x1-1/4 2 x 2 x 1-1/2 x 1-1/4 x1-1/2x1-1/2 3x3x2 x 1-1/2 x 1-1/4
Box
Ctn
Wt
5 5
100 40
0.41 0.62
Size
3 x 4 x 18 3 x 4 x 24
Box
– –
Ctn
6 5
Wt
4.37 5.90
90° ELBOW EXTRA LONG TURN DW-700XLT Part
W W W W
07451 07452 07453 07454
CxC Size
1-1/2 2 3 4
Box
10 5 2 –
Ctn
50 25 10 5
Wt
0.55 1.11 2.28 5.10
90° ELBOW FTG x C
DW-203 Part
W W W W
07410 07411 07412 07413
Size
1-1/4 1-1/2 2 3
Box
25 20 – –
Ctn
125 100 50 15
Wt
0.26 0.38 0.70 1.70
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 6 of 8
COPPER FITTING DATA TEMPERATURE - PRESSURE RATINGS OF SOLDER JOINTS SERVICE TEMPERATURE ºF
ALLOYS USED FOR JOINTS
100 150 200 250 100 150 200 250 100 150 200 250 100 150 200 250
50 / 50 Tin Lead Solder Not to be used in potable water systems
95 / 5 Tin-Antimony Solder
Alloy E Solder
Alloy HB Solder Brazing Alloys (melting at or above 1000ºF)
STANDARD TUBE SIZE, TYPES K, L, AND M WATER AND NON-CORROSIVE LIQUIDS & GASES
1/4 to 1
1-1/4 to 2
2-1/2 to 4
5 to 8
200 150 100 85 1090 625 505 270 710 475 375 320 1035 710 440 430
175 125 90 75 850 485 395 210 555 370 290 250 805 555 345 335
150 100 75 50 705 405 325 175 460 305 240 205 670 460 285 275
135 90 70 45 660 375 305 165 430 285 225 195 625 430 265 260
Pressure-temperature ratings is that of the tubing being used
Note: Ratings are those given in ASME B 16.22 “Wrought Copper and Copper Alloy Solder Joint Pressure Fittings.” (a) Solder alloys are covered by ASTM Standard Specification B32. The Safe Drinking Water Act Amendment of 1986 prohibits the use of any solder having a lead content in excess of 02% for potable water systems.
PRESSURE LOSS IN FITTINGS EXPRESSED AS EQUIVALENT LENGTH OF TUBE, FEET Normal or Standard in Inches
Wrot Copper Fittings 90 Degree Ell
45 Degree Ell
Tee Straight Run
Tee Side Branch
Coupling
180 Degree Bend
3/8
0.5
0.5
0.5
1
-
0.5
1/2
0.5
0.5
0.5
1
-
1
5/8
0.5
0.5
0.5
2
-
1
3/4
1
0.5
0.5
2
-
2
1
1
1
0.5
3
-
2
1-1/4
2
1
0.5
4
0.5
3
1-1/2
2
2
1
5
0.5
4
2
2
2
1
7
0.5
8
2-1/2
2
3
2
9
0.5
16
3
3
4
-
-
1
20
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 7 of 8
COPPER TUBE AND SOLDER TYPE FITTINGS 1. C ut tube square with the cutter or fine hack saw (32 tooth blade is recommended). Remove Burr. 2. Clean outside end of copper tube thoroughly with sand cloth or sandpaper equal depth of fitting. Leave no dark spots. 3. C lean inside of fitting carefully to tube stop with wire brush. Note: Sand cloth or sandpaper may also be used. 4. Using a brush, apply light uniform coat of soldering flux to the outside of the tube and inside of the fitting.
1. Cut tube to length & remove burr with file or scraper.
2. Clean outside of tube with sandpaper or sand cloth.
3. Clean inside of fitting with wire brush, sand cloth or sandpaper.
5. Slip tube into fitting to tube stop. Turn tube back and forth once or twice to distribute flux evenly. 6. Apply heat uniformly around the fitting with torch. When solder melts upon contact with heated fitting, the proper soldering temperature has been reached. Remove flame and feed solder slightly off center at the bottom of the joint. Proceed across the bottom of the fitting and up to the top center position. Return to the starting point, and then proceed up the incomplete side to the top, again, overlapping the solder metal. Wipe off surplus solder with a piece of cloth. CAUTION: No not overheat the joint or direct the flame into the face of the fitting cup. Overheating could burn the flux, which will destroy its effectiveness and the solder will not enter the joint properly.
4. Apply flux thoroughly to inside of fitting.
5. Apply flux thoroughly to outside of tube - assemble tube and fitting.
6. Apply heat with torch. When solder melts upon contact with heated fitting, the proper temp for soldering has been reached. Remove flame & feed solder to the joint at one or two points until a ring of solder appears at the end of the fitting.
Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-348-8464 • www.muellerindustries.com
page 8 of 8