CONTROLS & DRIVERS RANGE FEATURES SWITCHING DETECTOR
CONTROLS & DRIVERS A wide range of passive infrared (PIR) & microwave lighting controls for the automatic control of lighting. Sensors 85 PIR 85 Progr...
CONTROLS & DRIVERS A wide range of passive infrared (PIR) & microwave lighting controls for the automatic control of lighting. Sensors 85 PIR 85 Programmers 87 Drivers 88
RANGE FEATURES SWITCHING DETECTOR
DIMMING DETECTOR
• Switching with lux level sensing (IR handset adjustment)
• Step-down illuminance
• Active photocell
• Maintained illuminance (daylight harvesting)
• Time delay function: 10 sec - 99 min
• Burn in feature for fluorescent tubes
• Presence detection switching
• Control of DALI & DSI
• Programmable via IR handset • Adjustable detection sensitivity • On/off override via optional IR handset
Dimming functionality Two channel flexibility Scene setting and recall Integral relay to reduce parasitic power
CAT NO.
DESCRIPTION
LPCMPIRM
Switching PIR
LPCMPIRDSI
Switching Direct Dim DALI/DSI
LPCLRBOX
Surface mount box
Surface mount box (including PIR)
DETECTION PATTERN
70mm
DIMMING DETECTOR
4mm
2.8m
4mm 76mm
7m
PRESENCE / ABSENCE DETECTOR ADJUSTABLE MICROWAVE • Unique adjustable head design • Locking mechanism to prevent tampering • Flush or surface mounted options
LOAD
0°
RATING
45°
80°
92mm
SWITCHING DETECTOR • Absence detection switching
Surface mount box (including PIR)
• Manual on/off override via switch input
97mm
10A
DIMMING DETECTOR • Dimming functionality
85mm
• Two channel flexibility
90°
85mm
• Integral relay to reduce parasitic power • Suitable for all lighting types • Manual dimming with IR • Manual dimming with switch input
DETECTION PATTERN CORRIDORS
2.6m
Sensitivity set to maximum Detector head position set to 80°
6m
LARGE OFFICE / CLASSROOM Sensitivity set to 80° Detector head position set to 80°
30m
2.6m 25m
6m
MID SIZED OFFICE CAT NO.
DESCRIPTION
LPCLRPIRM
Switching PIR
LPCLRPIRDSI Switching Direct Dim DALI/DSI LPCLRCMBOX Surface mount box
Sensitivity set to maximum Detector head position set to 0°
2.6m 22m
6m
www.luceco.uk
85
PRESENCE / ABSENCE DETECTOR HIGH CEILING MOUNTED PIR
NO SHIELD DETECTION PATTERN
• Ground breaking detection range up to 40m (dependent on location) • Mounting height up to 20m • Unique lens technology – high sensitivity within the detection range • Ideal for high mounting applications • Adjustable masking shields to tailor detection zones (supplied)
IP54 RATED
15m
40m
AISLE DETECTION PATTERN
LOAD
RATING
10A
SWITCHING DETECTOR
FOCUSED DETECTION PATTERN
• Absence detection switching • Manual on/off override via switch input • Verify feature – reduce false triggering by ensuring detection from more than one of the internal sensors
DIMMING DETECTOR • Dimming functionality • Two channel flexibility
END OF AISLE DETECTION PATTERN
• Scene setting and recall • Integral relay to reduce parasitic power • Suitable for all lighting types • Manual dimming with IR • Manual dimming with switch input
CAT NO.
DESCRIPTION
LPCMHMPIRM65
Switching PIR
49mm
63mm
88mm
LPCMHMPIRDSI65 Switching Direct Dim DALI/DSI
PRESENCE DETECTOR CEILING/WALL MOUNTED MICROWAVE
IP66 RATED
95mm
15mm
48mm
LOAD
RATING
10A
CEILING MOUNTED DETECTION PATTERN
2.8m
CAT NO.
DESCRIPTION
LPCSMP66
Switching PIR
86
110mm
Built in lux level sensing - enhanced energy saving Fixing screw cap covers - smooth plate finish Vandal resistant design Minimal parasitic power Override facility
110mm
• • • • •
110mm
WALL MOUNTED DETECTION PATTERN
30m 6m
10m
a smarter use of electricity
PRESENCE DETECTOR
17mm
BATTEN MOUNT PIR
• Scene setting and recall • Suitable for all lighting types • Manual dimming with IR
DETECTION PATTERN
RATED
144mm
IP65
123mm
DIMMING DETECTOR
20mm
M20 X 1.5
• Integrated unit - no separate power supply required • Suitable for a wide range of luminaires • Supplied with comprehensive fitting kit • Retrofit solution
CAT NO.
DESCRIPTION
LPC3BSP65 Switching PIR
2A
LPC3BDP65 Switching Direct Dim DALI/DSI
N/A
Range
28mm
Height
LOAD RATING
33mm
REMOTE CONTROL FOR CEILING MOUNTED PIR Our range of infrared (IR) handsets have been designed to allow simple configuration and maximum user convenience. There‘s a handset to suit every user whether it‘s the contractor or building manager making a simple adjustment to a single detector, or a room user who simply wishes to override a setting or switch between pre-programmed scenes.
LPCUHC - Commissioning handset
LPCUSER - User handset
Compatible with all Luceco sensors.
• Compact infrared handset
• Simple scene setting
• Basic programming of IR enabled products
• On/off, raise/lower
www.luceco.uk
87
DRIVERS • LED Drivers are a key component as they supply the luminaire with power • Wrongly specified/matched drivers will inhibit performance and life of the LED • Dimmable drivers can be used with digital dimming systems such as DSI, switch-dim or DALI • Drivers are included with Luceco luminaires unless where clearly marked otherwise
FIXED
DIMMABLE
CAT NO.
CONNECTED LED WATTAGE RANGE (MIN-MAX)
CURRENT
TRIDONIC CODE
CAT NO.
CONNECTED LED WATTAGE RANGE (MIN-MAX)
CURRENT
TRIDONIC CODE
LDR5350
2.5W - 5W
350mA
24166311
LDRDIM15350
5.0W - 15W
350mA
86458899
LDR10350
4.5W - 10W
350mA
87500240
LDRDIM20900
9W - 20W
350-900mA
28000123
LDR20350
9.0W - 20W
350mA
87500187
LDRDIM20500
5.0W - 20W
500mA
86459107
LDR35350
17.5W - 35W
350mA
87500193
LDRDIM30700
5.0W - 30W
700mA
86458900
LDR10500
4.5W - 10W
500mA
87500242
LDRDIM35900
17.5W - 35W
900mA
28000125
LDR20500
9.0W - 20W
500mA
87500189
LDRDIM551400
25W - 55W
1400mA
28000129
LDR20700
9.0W - 20W
700mA
87500191
LDRDIM551750
25W - 55W
900-1750mA
28000129
LDR35700
17.5W - 35W
700mA
87500197
LDR60700
30W - 60W
700mA
87500201
LDR601050
30W - 60W
1050mA
87500203
LDR42900
21W - 42W
900mA
87500246
LDR651400
32.5W - 65W
1400mA
87500205
The Luceco range features LED Drivers from leading control gear manufacturer, Tridonic. The remote driver is an essential component, providing power to the LED chips and maximum rated life and performance of the LED’s can only be achieved with a high quality driver.