SURFACE/CONTOUR MEASURING MACHINES: FORMTRACER

PR

Complete surface and contour measurement, combined in one space-saving system.

Intelligent combinations for efficient measuring

COMBINED MEASURING MACHINES

FORMT Surface and contour measurement in a single device. No compromise, with all the options.

Meticulous surface and contour measurement to the highest quality standards requires enormous technical competence. As an international supplier of a wide range of production measurement technology, Mitutoyo sets the standard in knowledge and competence in its field. This applies in particular to the economical combination of both measuring processes into a single system that can be adapted to your requirements. FORMTRACER machines meet the requirements of unlimited capacity for surface and contour measurement – intelligently combined into one space-saving, economical device. This brochure gives you an overview of the broad and intelligently structured Mitutoyo range of models for combined surface and contour measurement. Here you will find the perfect FORMTRACER configuration for roughness and waviness testing as well as for the evaluation of profiles on the production line itself, in the measuring room or in the test laboratory. From semi-automatic through to CNC-controlled high-performance systems, fast, safe and efficient guidance on the best solution for your specific measurement needs. You can request to see more detailed single-product brochures on the FORMTRACER of your choice, the range of accessories and software available. Whatever you choose: with a Mitutoyo measuring system, you will secure the experience, competence and performance of an internationally successful technology leader, and customer-oriented service worth getting excited about. Mitutoyo: all the benefits, intelligently combined!

FORMTRACER Semi automatic/CNC

TRACER

3

The best connections for versatile applications. FORMTRACER variants.

SV-C

Breif profile

FORMTRACER SV-C 3100

Intelligent combination of two complete systems for contour measurement and comprehensive surface analysis.

Length measuring deviation: X axis: ± (1+0,01L) µm

With integral laser holoscale for particularly stringent requirements in contour measurement in the measuring room and laboratory. Otherwise, identical design as for SV-C3000.

CNC

FORMTRACER SV-C 4100

FORMTRACER EXTREME SV-C 3000 CNC / SV-C 4000 CNC

Powerful CNC-capable connection of two unlimited contour measurement and comprehensive surface analysis systems. With CNC control in all axes for efficient series testing.

Semi-automatic

Semi-automatic

Model

Length measuring deviation: X axis: ± (0,8+2L/100) µm

FORMTRACER CS-3100

CNC

CS (combined sensor)

SV-C (separate sensor)

Measuring method

Length measuring deviation: X axis: ± (1+4L/100) µm

Length measuring deviation: X axis: ± (1+1L/100) µm

FORMTRACER CS-5000/CS-5000 L Length measuring deviation: X axis: ± (0,2+0,001L) µm

FORMTRACER EXTREME CS-5000 CNC Length measuring deviation: X axis: ± (0,3+0,002L) µm

FORMTRACER SV-C 3100 FORMTRACER SV-C 4100

Powerful device with combined sensor for efficient simultaneous measuring of contour and surface in one measuring process.

The high-end system with integral laser holoscale for maximum precision in the test room and laboratory.

CNC reference system with a large measuring range for maximum precision tasks in research, development and quality assurance.

FORMTRACER EXTREME SV-C 3000 CNC FORMTRACER EXTREME SV-C 4000 CNC

Mitutoyo has a wide range of models for different fields of application.

Special features

Model

Measuring range Height X axis adjustment

Base plate dimensions

Two separate, interchangeable sensors Digital scale Motor-driven height-adjustment of the Z axis Fully-automatic sequence of measuring programs

SV-C 3100 S4 SV-C 3100 H4 SV-C 3100 W4 SV-C 3100 S8 SV-C 3100 H8 SV-C 3100 W8

100 mm 100 mm 100 mm 200 mm 200 mm 200 mm

300 mm 500 mm 500 mm 300 mm 500 mm 500 mm

600 x 450 mm 600 x 450 mm 1000 x 450 mm 600 x 450 mm 600 x 450 mm 1000 x 450 mm

Two separate, interchangeable sensors Laser holoscale Motor-driven height adjustment of the Z axis Fully automatic sequence of measuring programs

SV-C 4100 S4 SV-C 4100 H4 SV-C 4100 W4 SV-C 4100 S8 SV-C 4100 H8 SV-C 4100 W8

100 mm 100 mm 100 mm 200 mm 200 mm 200 mm

300 mm 500 mm 500 mm 300 mm 500 mm 500 mm

600 x 450 mm 600 x 450 mm 1000 x 450 mm 600 x 450 mm 600 x 450 mm 1000 x 450 mm

Two separate, interchangeable sensors Digital scale (laser holoscale SV-C 4000 CNC) Vibration-absorbing air bearings Up to six axes CNC controlled

SV-C 3000 CNC S8 SV-C 3000 CNC H8 SV-C 4000 CNC S8 SV-C 4000 CNC H8

200 mm 200 mm 200 mm 200 mm

300 mm 500 mm 300 mm 500 mm

1000 x 450 mm 1000 x 450 mm 1000 x 450 mm 1000 x 450 mm

A combined sensor Digital scale Motor-driven height adjustment of the Z axis Fully-automatic sequence of measuring programs

CS-3100

100 mm

300 mm

600 x 450 mm

A combined sensor Laser holoscale Motor-driven height-adjustment of the Z axis Vibration-absorbing air bearings Fully automatic sequence of measuring programs

CS-5000 CS-5000 L

200 mm 200 mm

250 mm 250 mm

A combined sensor Laser holoscale Vibration-absorbing air bearings Up to six axes CNC controlled

CS-5000 CNC S8 CS-5000 CNC H8

200 mm 200 mm

300 mm 500 mm

FORMTRACER CS-5000

FORMTRACER CS-5000 CNC

CS

FORMTRACER CS-3100

1000 x 450 mm 1000 x 450 mm

5

FORMTRACER technology: Simply more capable.

TWO in ONE – two measuring processes in a single system FORMTRACER machines open up the whole range of surface and contour measurement techniques – intelligence and compactness, combi measuring sequences for each process – or, with combined sensor, in a single measuring sequence for simultaneous surface and contour testing.

SV-C System

CS System

Measurement in two separate measuring sequences

Measurement in a single measuring sequence

FORMTRACER variants with SV-C system are fitted with two separate interchangeable sensors for separate surface and contour measurement. Evaluation and documentation of test results can either be separate or combined using Mitutoyo’s DUALTRACEPAK software.

FORMTRACER CS machines check the surface and contour of a workpiece in a single measuring sequence. They have a combined sensor for both processes. The FORMTRACEPAK software can either carry out separate or joint evaluation and documentation.

+ Contour testing

Surface testing

Laser holoscale in the X and Y axes Several models in the FORMTRACER series are fitted with highly sophisticated laser holoscales for maximum precision work. Laser holoscales are glass scales in which the interference of a laser beam is used in the measurement by bending on a holographic screen. A photoelement then transforms the bending pattern into an electrical sinusoidal wave. This innovative technology can achieve resolutions of up to 0.004 µm over the entire measuring range.

= Contour and surface testing

New design principles for even greater stability Higher stability and guidance quality due to modern design processes: FORMTRACER measuring machines are designed using the finite element method (FEM). This ensures considerably greater rigidity and straightness of the guide elements and effective vibration reduction – essential factors in giving these systems their impressive power.

Collision prevention

FORMTRACER machines in the SV-C, CS-3100 and CS-5000 CNC series are equipped with collision prevention.

Control in up to six axes Control in up to six axes – including tilting and rotational movements – means that the CNC systems in the FORMTRACER series can position workpieces extremely quickly and therefore achieve optimum throughput rates during series measurements. Particularly useful is the option of controlling all axes via the double joystick supplied as standard.

Θ1 Tilting of the measuring system

Θ2

7

X 100/200 mm Z1 50 mm Range of travel Z2 300/500 mm

FORMTRACER SV-C 3100 As powerful as two separate specialised systems. Economically combined into a single device.

Resolution: X axis Z1 axis Z2 axis

0,05 µm 0,2 µm 1,0 µm

X axis Z1 axis

± (1+0,01L) µm ± (2+ |4H| /100) µm

Length measuring deviation: Surface measurement:

Measuring range 800 µm Straightness (0,05+0,001L) µm deviation

Mess- und Analysesoftware

Measuring range: X 100/200 mm Z 50 mm Range of travel Z2 300/500 mm

Resolution: X axis Z1 axis Z2 axis

0,05 µm 0,05 µm 1,0 µm

X axis Z1 axis

± (0,8+0,01L) µm ± (0,8+ |0,5H| /25) µm

Length measuring deviation: Surface measurement:

Measuring range 800 µm Straightness (0,05+0,001L) µm deviation

Two separate sensors for contour and surface analysis Inclination of the sensor up to ± 45˚possible Straightness deviation from the X axis (feed): for contour measurement 0.8 µm/100 mm for surface measurement 0.2 µm/200 mm Ceramic straightness guidance of the X axis (feed) Digital glass scale in the X and Z axis Motor-driven height adjustment of the Z2 axis Automatic raising and lowering of the probe tip Joystick operation for moving all axes and for starting and stopping the measuring process etc. Measurement and analytical software supplied as standard (can be run under Windows 2000/XP) Data transmission via USB interface ABS scale in the Z2 axis Fast traversing speed Automatic calibration function Collision prevention

FORMTRACER SV-C 4100 Integral laser holoscale with 0.05 µm Resolution in the Z1 axis for high-precision testing in measuring rooms and laboratories. Further equipment characteristics as for the SV-C 3100

SV-C 4100

Measuring range:

SV-C 3100

FORMTRACER SV-C 3100 and SV-C 4100. Double benefits, no compromise.

FORMTRACER Semi automatic

9

FORMTRACER EXTREME SV-C 3000 CNC. Production-ready measurement competence.

SV-C 3000 CNC Measuring range: X axis Z axis

± (1+4L/200) µm ± (3+|2Z|/25) µm

Resolution: X axis Z axis

0,05 µm 0,2 µm

Length measuring deviation: X-Achse Z1-Achse

200 mm 50 mm

Traversing speed: CNC Joystick

max. 200 mm/s 0-60 mm/s

FORMTRACER EXTREME SV-C 3000 CNC Perfect connection of two unlimited systems for contour and surface analysis. With CNC control in six axes for comprehensive serial measurements. Two separate sensors Fast traversing speed Digital scale in the X and Z axis Straightness deviation of the X axis (feed): for contour measurement 2 µm/200 mm for surface measurement 0.5µm/200 mm Ceramic straightness guidance on the X axis (feed) Simultaneous movement in several axes is possible Driving in up to six axes is possible Automatic positioning of the workpiece by controllable rotary table and Y table Vibration-absorbing air bearings Double joystick for programming all six axes and for starting and stopping the measuring process etc. Measuring and analytical software FORMTRACEPAK supplied as standard (will run under Windows XP) Data transmission via USB interface

Control in up to 6 axes

FORMTRACER CNC

11

FORMTRACER CS-3100. Double the value – half the cost

CS-3100 Measuring range: X axis Z axis

± (1+1L/100) µm ± (2+|4H|/100) µm

Resolution: X axis Z axis Z2 axis

0,05 µm 5 mm / 0,08 µm 0,5 mm / 0,008 µm 1,0 µm

Length measuring deviation: X axis Z axis

100 mm 5 mm

FORMTRACER CS-3100 Simultaneous surface and contour testing over a wide measuring range in a single pass. For maximum savings in time and cost. A combined sensor Inclination of the sensor up to ± 45˚ possible Straightness deviation of the X axis (feed): 0.2 µm/100 mm Ceramic straightness guidance of the X axis (feed) Inductive measuring system in the Z axis Motor-driven height adjustment of the Z2 axis Automatic raising and lowering of the probe tip Joystick operation for moving all axes and among other things for starting and stopping the measuring process FORMTRACEPAK measurement and analytical software supplied as standard (can be run under Windows XP) Data transmission via USB interface ABS scale in the Z2 axis Fast traversing speed Automatic calibration function Collision prevention

FORMTRACER Semi automatic

13

FORMTRACER CS-5000/CS-5000 L A measure for maximum performance.

CS-5000/CS-5000 L CS-5000 Measuring range: X axis Z axis

± (0,2+0,001L) µm ± (0,2+0,005H) µm

Resolution: X axis Z axis

0,00625 µm to 0,002 µm

Length measuring deviation: X axis Z axis

200 mm 6 mm or 12 mm

CS-5000 L Measuring range: X axis Z axis

± (0,2+0,001L) µm ± (0,3+0,02H) µm

Resolution: X axis Z axis

0,00625 µm to 0,004 µm

Length measuring deviation: X axis Z axis

200 mm 12 mm or 24 mm

FORMTRACER CS-5000 / CS-5000 L Top technology with impressive resolution due to the integral laser holoscale in the X and Z axes. The ideal equipment for surface and contour testing without compromise, particularly in the measuring room and laboratory. A combined sensor Laser holoscale in the X and Z axes Straightness deviation of the X axis (feed): With short measuring probe up to (0.05+0.0005 L) µm Ceramic straightness guidance of the X axis (feed) Motor-driven height adjustment of the Z axis Active control of the probe system Vibration-absorbing air bearing Joystick operation for moving all axes and for starting and stopping the measuring process etc. FORMTRACEPAK measurement and analytical software supplied as standard Data transmission via RS-232-C interface

FORMTRACER Semi automatic

15

FORMTRACER EXTREME CS-5000 CNC. Setting the standards.

CS-5000 CNC Measuring range: X axis ± (0,3+0,2L/100) µm Z aaxis ± (0,3+|2H|/100) µm

Resolution: X axis Z axis

0,00625 µm to 0,004 µm

Length measuring deviation: X axis Z axis Z column

200 mm 12 mm / 24 mm 300 / 500 mm

Traversing speed: CNC Joystick

Drive in up to 6 axes

max. 200 mm/s 0-60 mm/s

FORMTRACER EXTREME CS-5000 CNC Perfect CNC precision for research, development, quality assurance and series testing. Better, high speed performance and a wide measuring range. A combined sensor Laser holoscale in the X and Z axes Straightness deviation of the X axis (feed): with short measuring probe (0.1+0.0015 L) µm with long measuring probe (0.2 + 0.0015 L) µm Ceramic straightness guidance of the X axis (feed) Drive is possible in up to six axes Active control of the probe system Automatic positioning of the workpiece with controllable rotary table and Y table Vibration-absorbing air bearing Double joystick operation for programming all six axes and for starting and stopping the measuring process etc. FORMTRACEPAK measurement and analytical software supplied as standard Data transmission via USB interface

FORMTRACER CNC

17

The full program.

Software package Expansion module MeasurLink Module for statistical measurement data processing and analysis, and storage of measured data.

With the semiautomatic systems in the SV-C series, DUALTRACEPAK software covers machine control and the evaluation and documentation of test results, while FORMTRACEPAK software fulfils these tasks for the CS series and for CNC variants controllable in up to six axes. Both software solutions offer the user the full program of maximum efficiency surface and contour measurement with versatile evaluation and documentation options. Some examples follow: Automatic measurement program sequences Best fit for automatic measuring sequence Representation of results as a drawing and table Graphic representation of contour or surface profile Construction of help geometries Graphic setpoint/actual comparison Freely-definable tolerance ranges Editing function Automatic securing of the measurement results Layout editor for representation of the test results Automatic calibration function Archiving of calibration data

All FORMTRACER machines are supplied as standard with perfectly configured software tailored to the specific performance profiles.

Ø8

Ø8 Ø8

Possible combinations of probe tips with the FORMTRACER models SV-C 3100, SV-C 4100 and SV-C 3000 CNC 15

Ø8

Ø8 Ø8

15 15 Stylus 185 Stylus 185 Stylus 185

15 5 15 155 Taster 15515 40 40 40

Taster Taster

15

Ø8

Ø3 Ø3

Ø8 Ø3 Ø8

For contour measurement

For surface measurement

Taster Taster 15 15 Taster 0 130 13013 15

15

Version

Probe tips

95

Ø8

25

95

Stylus 145

(Standard accessory)*H

5,2

Detail - A

Cross-grinding

H

Ø 2,4

H

H

HH

H

5,2 33,8

Knife edge

Detail - A

H

H H H

Colour marking

60

Ball

H

43,8 37,7

Ø8 Ø8

Ø4 Ø4

Ø4 Ø4 2,5

2,5 2,5

Ø5

50

Ø8

55

SPH 13

Ø4

40

50

Ø3 ØØ33

Ø4 ØØ44

Ø6 ØØ66

Ø8 ØØ88

40

2,5

50

55

55

400 40 4 0 50 50 5

2,5

Ø4

Ø4

2,5 2,5 2,5

500 50 5

2,5 20

3 ØØ33

Ø4 Ø4 Ø4

200 20 2

1 11 Ø5

Ø3

55

1

20

55

1,6 1,6 ØØ1,6

13

Ø5

Ø4 Ø3

1

Ø 1,6 0,4 0,4 0,4

500 50 5 122,5,5 12,51

50

Saphir Saphir Saphir

55 55

Ø8 Ø4

20

Ø 1,6 1,6 ØØ1,6

55

0,4

Ø4

Ø 1,6 0,4

2,5 2,5

1

Ø 3Ø 5 Ø5 1

Ø3 Ø3 Ø3 1

20

50

Ø6 Ø6 Ø6

1

55

SPH 12

Ø3

0,4

50

12,5

40

Saphir

Ø6

Ø6

SPH 11

Ø 1,6

1 1

55

20 55 55

20 20

2,5

Ø6

Ø 1,6

50

13

Ø6

Ø6 Ø6 Ø3

Ø3 Ø3

Ø6

13 55 55

40 40 50 50

H H H

Ø6

13 13

60

0,4

50 50 50 20 HH Saphir H

20 20

Ø4

Ø 1,6 Ø4 Ø4 0,4

Ø 1,6 Ø 1,6

Detail - A

12,5

H

1 1

Ø6 Ø 1,6 Ø6

Ø 1,6 Ø 1,6 0,4 0,4

10

Colour marking

H

Probe tips for small diameters

0,4 0,4

Detail - A

Ø 0,6

50

0,4

6,4 7,6 7,6

0,9 A

50 50 12,5

,5

12,512

Colour marking

60

Ø 2,4

,2 Ø1

Ø 2,4

Detail - A

Detail - A

45 37,7

(SPH-55) 6 mm (SPH-65) 12 mm (SPH-75) 20 mm (SPH-85) 30 mm (SPH-95) 42 mm

H

H H H

60

Ø 2,4

(SPH-54) 6 mm (SPH-64) 12 mm (SPH-74) 20 mm (SPH-84) 30 mm (SPH-94) 42 mm

H

Ø 1,2

Code Nos. 12AAB339 (2 µm) 12AAB410 (5 µm) 12AAB422 (10 µm)

(SPH-53) 6 mm (SPH-63) 12 mm (SPH-73) 20 mm (SPH-83) 30 mmSaphir Saphir Saphir (SPH-93) 42 mm

H H H H

Ø2,4

Detail - A

For gear wheels

(SPH-52) 6 mm (SPH-62) 12 mm (SPH-72) 20 mm (SPH-82) 30 mm (SPH-92) 42 mm

H H H

Conical

Code Nos. 12AAC736 (2 µm) 12AAB407 (5 µm) 12AAB419 (10 µm)

H

Colour marking

60

37,7 45,2

HH

(SPH-51) 6 mm (SPH-61) 12 mm (SPH-71)* 20 mm (SPH-81) 30 mm (SPH-91) 42 mm

Detail - A

Ø 1,2

For deep grooves

H

Ø5 ØØ55

Code Nos. 12AAC741 (2 µm) 12AAB414 (5 µm) 12AAB426 (10 µm)

HH

Ø4

0,9

H

H

25 25 25

Ø8

Probe tips

95 H95H95

Ø4

Stylus Stylus Stylus 1455 14514

Flat on one side Ø 2,4

(ABH-11)

15 H 15 15

19

55

Ø4 ØØ44

Colour marking

60 144,7 137,7

H

Ø8 ØØ88

5,2

Ø 1,2

For deep bores x 3 probes

25

H Taster Taster 0 Taster 13 0 13013 15 15 15

Detail - A

Detail - A

(ABH-52) 6 (ABH-62) 12 (ABH-72) 20 (ABH-82) 30 (ABH-92) 42

15 15 15H

2,5

Ø 2,4

5

H155 H15515

Ø8

For smallStylus diameters 145

0,9

4 40 400

Ø3 ØØ33

94,7 87,7

15

Taster 130 Taster Taster Taster 15

Ø8

60

(ABH-51) 6 mm (ABH-61) 12 mm (ABH-71)* 20 mm (ABH-81) 30 mm (ABH-91) 42 mm

15 15 15

Stylus Stylus 18 55 Stylus 18518

15

130

Ø8

Ø8 ØØ88 40

Ø3

Taster

15

Designation

25

15

155

Taster

Ø8

Ø3

1,2

Angles

Ø 0,3

Detail - A

Ø 0,6

Colour marking

15

155 4

0 (Standard accessory)*

0,4

2,5

Ø 2,4

8,9

Code Nos. 12AAC740 (2 µm) 12AAB413 (5 µm) 12AAB425 (10 µm)

Code Nos. 12AAC739 (2 µm) 12AAB412 (5 µm) 12AAB424 (10 µm)

Taster Straight

Detail - A

95 95 95 25 Stylus 15 25 145

Ø8

Ø8

44,2 37,7

For deep bores x 2 probes

Eccentric version

Dimension

Stylus Stylus Stylus 185 5145 14

Measuring arms

For small bores Code Nos. 12AC7333 (2 µm) 12AAB404 (5 µm) 12AAB417 (10 µm)

15

Stylus 185

Ø8 ØØ88

Probe tips

Ø8 ØØ88

Dimension

Ø8

Ø8

Version / designation

Ø8 Ø8

15 15

Possible combinations of probe tips with the FORMTRACER model CS-3100.

Ø4

Ø3

10 8 10 0,4

Ø3 Ø3 Ø3

Ø4

10 0,4 23 21

10

Ø3 Ø3 Ø3

Ø4

67,5 129 59

6,5 6,5

60° 1

Ø3

Ø4

Ø3 59

1

136,5

Ø1,2

18

40° 60°

Ø4

1

6,5

Ø 1,2

Ø 1,2

3,2

23 14,5 21 12,5

6,5

Ø4

23

Ø1,2

Ø4

10 10 0,4 8

Ø 1,2

Ø3 Ø3

Ø4 59

Code No. 12AAD562

14,5

3,2

14,5 12,5

Ø3

Ø4

12966,5

3,2 3,2

6,5

Ø4

Ø 1,2 Ø1,2

6,5

136,5

40°

60° 40°

Ø4

Ø4

14,5

Ø3

14,5

129

3,23,2

14,5 23 12,5 21

14,5 12,5

2

Ø4

60°

Diamond tip Ø4

136,5 66,5 40°

18

Ø4

11 60°

60°

1

1

129

3,2

14,5 12,5

23 21 6,5

Ø 1,2

10

Ø3

Ø4

23

Ø3

Ø1,2

Ø 1,2

Code No. 12AAD558

Ø 1,2

60° 60° 18

Ø 1,2 60°

Ø4 Ø4

Ø4

3,2

6,5 6,5 6,5

2 x length probe tip Ø4

3,2

6,5

66,5 129 136,5

Ø4

Ø4 60°

14,5 1

1

18

Ø4

59

59 59 66,5 59 67,5 66,5

Ø3 Ø3

1

Code No. 12AAD560

1

2

60°

Ø60° 1,2

Ø4 3,2 3,2 3,2

Ø3

6,5

66,5

1

Ø4

59

0,6

Ø 1,2

23 21

6,5

10 10 0,4 23

Ø 1,2

Ø 1,2

Ø 1,2

Diamond tipØ 4

Ø4 Ø4

Eccentric

Ø4

Ø 1,2

10

3,2

6,5 6,5 6,5

Code No. 12AAD552

23 10

67,5

Ø3

Ø3 59 1

Ø4

Ø4

23 2

18

24,8 3,2

59 59 59 66,5 67,5 66,5

60° 60°

1

Dimond tip

10

Ø4

For grooves

2

Ø4 Ø4 3,2 3,2 3,2

Ø4

Ø 1,2

1 0,6

60° 60°

Diamond tip

24,8 Ø 1,2

Ø 1,2

Probe tipsØ 1,2

10 10 0,4 10

10

6,5

10 0,4

Ø3

6,5

67,5

6,5 6,5

Standard Ø4

Ø3 59

66,5

Dimension

Ø4

Ø4

Ø4

Ø 1,2

59

2

59 59 66,566,5

Ø4

Ø4 3,2 3,2

10

60°

Dimond tip 3,2

Ø4

Ø4

1 0,6

Ø 1,2 60° 30°

3,2

Ø 1,2

6,5

Code No. 12AAD556

1

1010 0,4

ØØ1,2 1,2

66,5

10

10 0,4

24,8

Ø4

1010 88

3,2

For bores

0,6

Ø 1,2

60°

10 0,4

6,5 6,5

Ø3

Ø4

Ø 1,2

59

3,2 3,2

Code No. 12AAD554 24,8

6,5

60°

ØØ44 Ø 3Ø 3

Ø 4Ø 4 10 10

10 0,4

59 59 66,5 66,5

59 66,5

Sapphire tip

24,8

0,6

1

Probe tips

Conical probe tip

1 1

3,2 10 8

6,5

14,5

Dimension

Ø 1,2

10 8

59 66,5

Ø4

10

3,2

Ø3

10

For Formtracer CS-3100 1

Ø4

Ø4

For surface and contour measurement

Ø1,2

6,5

136,5 40°

Possible combinations of probe tips with the FORMTRACER models CS-5000 and CS-5000 CNC. For combined surface and contour measurement

For FORMTRACER CS-5000 CNC L/CS-5000 CNC Dimension

Standard

Standard 107 1

Ø4

(19)

Ø4

Ø4

25 (19)

Ball Ø 0,5 mm

15 / 10

35,95

0,4

1,6

6

0,4

40°

40°

65,95

Code No. 12AAD653 109

3

74,5

(31,5)

40°

Ø1,2

Ø4

(6,5)

4° 12,5

0,6

Ø0,6

Ø4

Ø6

Ø6

0,4

25,95

Code No. 12AAD652

Ø4

Ø1,2 0,4

Ø4

Ø4 Ø4

Ø1,2

0,6

(31,5)

Eccentric

(19)

(2,5)

1,2

6

74,5

1,2 mm

34,5

Ø1,2

106,6 / 106,4

40°

53,9 10

Ø6

Code No.12AAD651

0,6

25,95

For small bores Code No. 12AAD648

Ø6

145,95

For bores

(19)

(2,5)

1,2

6

(6,8)

Ø6 12,75

1,6 mm

34,5

Ball Ø 0,5 mm

Ø1,2

115,95

Ø1,2

Ball tip Code No 12AAD546

40°

54,1

15

(31,5)

Ø6

For small bores Code No. 12AAD647

187

154,5

Kugel Ø 0,5 mm

40°

Ø1,2

Standard Code No. 12AAD544

(1,1)

(8,8)

12,5

Ø4

Ø1,2

Ø6

40°

Double length 1

(30,5)

(8,6)

65,95

12,5

Ø4 Ø4

74,5

35,95

65,95

Ball tip Standard Code No. 12AAC562 Code No. 12AAC563 106

1

35,95

40°

(6,5)

(2,6)

6,5

Ø1,2

25,95

Double length

Ø6

(31,5)

74,5

Ø4

34,5

Ball tip Code No. 12AAD544

25,25

54,5 1

Standard Code No. 12AAD543

0,6

Standard Code No. 12AAC261

Probe tip

Ø0,6

Probe tips

Ø1,2

Dimension

12,75

For FORMTRACER CS-5000

35,95

16 65,95

For deep grooves. Code No. 12AAD649 54,5 1

Ø4 (19)

Ø4

34,5

26

Ø1,8

(22)

Ø1,2

25,95

40°

Eccentric. Code No. 12AAD650

15

6,5

Ø4

Ø4 29,95

(2,5)

6,5

Ø1,2

(19) Ø4

55,5 34,5

2

40°

21

Accessories

Levelling tables

Manual three-axis adjustment table

Aligned

For significantly easier manual fine positioning of the workpiece using Digimatic integral micrometers. The information required for alignment is provided and displayed by the software. The triple-axis adjustment table also enables ideal alignment of cylindrical workpieces to the measurement axis – measurement errors by deviation from the mid-line in the parts tested can therefore be reliably avoided.

Not aligned Measurement end point Line to be measured Measurement start point

Measured contour

Automatic levelling table For perfect adaptation of the workpiece in the measuring range. After determining the workpiece inclination by the measuring system, the software calculates the position of the piece to be tested and thereby determines the optimal automatic setting of the levelling table. Code No. 178-024

Code No. 218-001

Crossed table

Code No. 178-028

Code No. 178-052-1

XY levelling table (DIGIMATIC)

Code No. 218-003

Code No. 78-009

Rotary vice

Vice

Levelling

Tilting

Y axis adjustment

Code No. 072-234

Horizontal V block with clamp

Code No. 998291

Horizontal block

Code No. 178-611

Standard

Code No. 178-024

Vibration-absorbing table 23

Ask for our other general brochures!

Individuelle Lösungen, ausgereifte Technologien, überzeugende Konzepte. Formmessgeräte von Mitutoyo.

FORM MEASURING MACHINES Individual solutions for the all-round perfect measurement of rotationally-symmetrical workpieces – from particularly user-friendly compact devices with integral printer through to high-accuracy reference models.

© MITUTOYO/D

FORMMESSGERÄTE

CONTRACER CONTOUR MEASURING MACHINES Contour measurement with profile for high-performance results. Whether digital solutions for mobile applications or stationary use: Mitutoyo offers individual systems, sophisticated technologies and convincing concepts, based on world-recognised competence and experience.

SURFTEST SURFACE MEASURING MACHINES Mitutoyo presents an intelligently structured product range of sophisticated solutions for modern surface testing. Discerning clients will find here the configuration to meet their needs, for thoroughly perfect roughness and waviness measurements – both in production and in the laboratory.

Note: All our product details, in particular the illustrations, drawings, dimensional and performance details and other technical specifications contained in this publication are to be considered to be approximate average values. To this extent, we reserve the right to make changes in design, technical data, dimensions and weight. Our specified standards, similar technical rules and technical specifications, descriptions and illustrations of the products are correct at the time of printing. The current version of our general terms and conditions also apply. Only offers which we have submitted can considered to be definitive.

Mitutoyo Scandinavia AB Släntv. 6 • Box 712 SE-194 27 Upplands Väsby Tel: 08-594 109 50 Fax: 08-590 924 10 [email protected] www.mitutoyo.se