P E R I M E T E R S O L U T I O N S contemporary display and merchandising systems

PEERLESS display + merchandising

TM

systems

FREELINE N O N

M O D U L A R

The FREELINE non modular system offers complete flexibility, combining both lateral and vertical adjustability. Ideal for retail, showroom and commercial interiors, discreet wall mounted crossrails are easily fitted onto elevations. Loose mobile posts may be freely applied together with a wide selection of hanging rails, shelves and display accessories. Although refined in scale, FREELINE is equally effective for full merchandising presentation or minimalist displays.

01 - 02

To reposition displays, simply lift off and relocate at will.

LADIESWEAR MENSWEAR FOOTWEAR ACCESSORIES

CHILDRENSWEAR LINGERIE SWIMWEAR GIFTWARE LEATHERGOODS SPORTSWEAR

Whether you are considering a new shopfit or an upgrade to your existing interior, FREELINE may be readily fitted to new or existing walls, without the need for costly shopfitting.

FREELINE Floor Units FREELINE floor units are available to complement the wall systems. Offering maximum flexibility, these versatile units support the same mobile posts and fittings to allow perimeter equipment to easily be moved from walls to floor.

See separate literature for further information.

FREELINE N O N

M O D U L A R

Crossrails

Surface mounted crossrails with aluminium, coloured or veneered cappings may be applied directly to walls. Semi-recessed crossrails in aluminium or colour, are designed to be partially concealed by facing panels for more discreet displays.

Surface mounted crossrail and capping

Semi-recessed crossrail

Posts

Posts are available in alternative lengths and may be freely suspended from crossrails and remain mobile for easy relocation.

Rectangular Post

Elliptical Post

32x15mm section illustrated full size

34x17mm section illustrated full size

03 - 04

A wide variety of fittings including rails, arms, shelves and display accessories may be applied to accommodate varied merchandising needs.

Single or double tier displays are recommended for most installations, however this may be varied to suit individual project needs.

See technical literature for further infomation.

Accessory + Graphic Display panels

Side + Front Hanging + Shelving

Mobile display panels, pre-fitted with slotted uprights or plug-in ferrule systems, may be attached.

A selection of side hanging or rear display rails, forward facing arms, prongs or specialist fittings may be applied.

Rails and arms connect directly into the mobile vertical posts, enabling displays to be totally flexible and repositioned anywhere along the horizontal crossrails. Glass or timber shelves are available to order, supported by rectangular or curved brackets and optional fixings. Mobile panels are also offered with a selection of display fittings, but can also be supplied plain for graphics and signage, or as suspended mirrors.

OMNI

WA L L U N I T S REGULAR + LARGE

OMNI wall units are available in four standard sizes, providing contemporary, adaptable fixtures ideal for fashion, accessories and giftware. Merchandise may be displayed directly from fine stainless steel frames or optional fittings. These include glass or timber shelves, accessory prongs and intermediate display rails for front and side presentation. LARGE and REGULAR units are designed to rest on floors with simple fixing to walls. See next page for MEDIUM and SMALL units. See PEERLESS data sheets for technical infomation.

05 - 06

OMNI wall units are illustrated with optional glass tops, shelves and intermediate rails.

OMNI

REGULAR wall frame

OW.R2

1480H x 1200W x 300D*

* Overall

unit depths will vary subject to fittings and merchandise displayed.

OMNI LARGE wall frame OW.H2

OMNI Floor Units OMNI floor units are available to complement OMNI wall frames. Available in two standard sizes with optional fittings, floor units are also designed to provide complete flexibility for merchandising. See separate literature for further information.

2120H x 1200W x 300D*

OMNI

WA L L U N I T S SMALL + MEDIUM

OMNI SMALL and MEDIUM wall units are designed for easy wall mounting. Units illustrated with optional shelves may be fitted at heights to accommodate suspended side or forward facing merchandise. Accessory rails or timber panels pre-fitted with PEERLESS plug-in ferrule systems may also be attached.

07 - 08

Frames may be used in isolation or combined with other OMNI wall unit sizes.

small

regular

large

medium

OMNI wall units are illustrated with optional glass tops, shelves and intermediate rails.

OMNI

SMALL wall frame

OW.S2

400H x 1200W x 300D*

* Overall

unit depths will vary subject to fittings and merchandise displayed.

OMNI

MEDIUM wall frame

OW.M2 1030H x 1200W x 300D*

STEPPE Ta b l e s The STEPPE series of display tables may be combined with OMNI wall and floor units. See separate literature for further information.

VERSO

WALL + CEILING FRAMES

The innovative VERSO wall and ceiling frames, offer minimalist presentation for retail and showroom environments. Ideal for fashion and accessories, these flexible units support side or front hanging with optional shelves. The fine stainless steel frames are designed for perimeter locations with floor to wall connection. Alternatively, units may be reversed and hung from structurally suitable ceilings, either connected to walls or suspended in mid floor areas alone. When suspended, VERSO features telescopic verticals to accommodate alternative ceiling heights. Units may be combined in both floor mounted and suspended formats for dramatic effect. Frames are illustrated with optional shelves.

09 - 10

See PEERLESS technical data sheets for further information.

VERSO wall to floor + wall to ceiling frame VWF.01 VWF.02

Wall to Floor frame 1210W x 430D* x 1500H Wall to Ceiling frame 1210W x 430D* x 1500H (2100H ext.)

* Overall

unit depths will vary subject to fittings and merchandise displayed.

VERSO frame suspended from ceiling (mid floor) VWF.03

Ceiling frame

1210W x 600D* x 1500H (2100H ext.)

ROTOR Floor Units ROTOR units are designed to complement VERSO frames. ROTOR is available in three widths and two heights, with optional display accessories. See separate literature further information.

for

Units feature our unique lift and twist mechanism for instant conversion from side to front hanging display.

UPRIGHT + POST WA L L D I S P L AY S Y S T E M S

A refined collection of vertical UPRIGHTS and POSTS are offered for perimeter and wall elevations, floor to ceiling mid floor locations and window areas.

Whether your need is for a visible distinctive look or more discreet support, our UPRIGHTS and POSTS will enhance any retail, showroom and commercial interior, providing optimum display and presentation. Designed for maximum flexibility, an extensive range of loose PEERLESS hanging rails, shelves and display accessories are also available in alternative styles and finishes to complement any design theme. Fittings are easily attached to verticals and remain fully adjustable for relocation to suit your merchandise.

11 - 12

POSTS AND PROFILES POSTS and larger sections are offered in a variety of rectangular and elliptical profiles, with alternative fixings to enable them to be attached directly to walls, or float slightly away from perimeter elevations. Posts can also be fitted from floor to ceiling where mid floor or window displays are desired.

POSTS may be used on their own, integrated into shopfitting works, or combination with other PEERLESS systems to create many varied and individual designs.

FLOOR FURNITURE To extend the versatility of our perimeter systems, freestanding fixtures are also offered, with integrated POSTS to enable loose equipment to be easily moved from wall to floor units.

RECESSED UPRIGHTS Where efficient yet discrete displays are preferred, our finer UPRIGHTS may be integrated within perimeter elevations, panels or joinery, for fully recessed and unobtrusive appearance. Loose PEERLESS fittings may again be attached for maximum flexibility.

FERRULE WA L L

PA N E L S

A distinctive range of WALL PANELS pre-fitted with our unique FERRULE socket systems, providing refined and contemporary solutions for retail display, merchandising and shelving.

WALL PANELS are available in optional sizes and finishes to order, with a choice of FERRULES to suite your presentation and design requirements. Ferrules may be installed at various centres to perfectly accommodate your needs, with a wide range of adjustable plug-in fittings and accessories available. See separate literature for further information.

13 - 14

FERRULE PANELS may be mounted directly on to walls, or fitted with adjustable feet and brackets to float slightly in front of elevations. Optional rear lighting can be added to create more dramatic halo effects. Panels may be spaced slightly apart or grouped closer together for continuous displays. Co-ordinated panel finishes may also be combined to emphasise elevations.

PANELS are ideal alongside other PEERLESS systems to define and break up areas. Similarly, panels can be suspended from our FREELINE non modular wall systems, or included within our POST systems to feature accessories or promotions. FLOOR UNITS In addition to our standard PEERLESS floor units, special fixtures can be offered which integrate our FERRULE PANELS into customised freestanding furniture.

PEERLESS DESIGNS LIMITED Unit 9 Brunswick Way London N11 1JL T F E

+44 ( 0)) 20 8362 8500 +44 ( 0)) 20 8362 8525 [email protected]

w w w. p e e r l e s s d e s i g n s . c o m

Registered in England No 1884996