Consulting
Storage
Software
Services
Training
Catalogue Master
For more information:
www.scanmodul.com
Page General....................................................................................
4 Scan Modul concern and dealers.............................. 152
Scancell carts Colors available.......................................................... Interior and exterior measurements....................... Open fronts................................................................. Doors........................................................................... Rolling doors............................................................... Vario drawers.............................................................. Telescopic drawers................................................... Combi........................................................................ Multi-function carts.................................................... Accessories................................................................
6 8 10 15 20 25 30 35 41 50
Open steel carts Open steel carts and accessories.............................
67
Transport carts Open transport carts....................................................... Accessories................................................................... Closed transport carts....................................................
73 76 77
Cabinets Vision and Topline cabinets.......................................... Cabinet panels.................................................................... Accessories......................................................................... Scancell wall mounted cabinets..................................
79 89 99 101
Table of contents
Scan Modul System
Racks Scanmo racks...................................................................... 109
Modules Trays and boxes.................................................................... Baskets.................................................................................. Modular inserts................................................................... Medicine distribution........................................................ Labeling and accessories............................................. Wire baskets........................................................................ Autoclave baskets I........................................................... Autoclave baskets II.......................................................... Instrument trays................................................................. Shelves................................................................................... Material description..........................................................
113 120 1 23 127 132 138 140 142 143 148 151 3
Scan Modul System - a well thought out solution Design with care - for people who care
Intelligent Storage Intelligent storage begins with intelligent modules. All of our modules can be easily transformed into smaller, custom tailored, exchangeable storage systems within themselves. The compartments adjust to fit the size of any item.
Well-placed Functionality
Effortless Transportation
Quality for the future
Single, double or triple width. Vertical handles, swivel wheels, wheels with brakes, wheel bumpers and coupling-hooks. Well-thought-out, ergonomically designed details make transportation effortless.
Easy Distribution Lightweight and simple distribution carts that allow easy access to the modules and a clear overview of the contents. Open or closed with all the accessories you need to ease you work.
Design with care Our design simplicity emphasizes a minimalist and serene environment. This modern design creates a visual calmness in the department.
4
Behind this calm exterior is a highly functional diverse interior with endless possibilities. Each module can be adjusted to meet the exact need in the exact department.
Our first products were delivered over 30 years ago and many of these products are still in use today. In our ongoing product development we emphasize that our future solutions should always fits the existing system.
Flexibility & User-friendly The development of our products is built on the philosophy that they should adjust easily and adapt to changes in the surroundings.
The System The fundamental principle in our storage solutions is a module with ISO standard measurements 600x400 mm (235/8”x 15¾”) and variable heights. This provides two possible directions for insertion, allowing the modules to move freely throughout the entire system!
B
A 60
0
0
40
The results are: • • • • • • • •
Symbols
Well organized and structured warehousing More storage in less space Better overview of product Easier access to the materials Ergonomically correct solutions Reduction in spending for inventory Reduction in stock in the central supply and storage departments
•
Symbols used
Half size module Length 400mm (15¾”) Width 300mm (11¾”)
Type A insertion Length 600mm (235/8”) Width 400mm (15¾”)
A 400
400
Full size module Length 600mm (235/8”) Width 400mm (15¾”)
600
Direction of insertion
B
Full or half module with partions
400
600
300
Number of inserts in full size module 600mm (235/8”) x 400mm (15¾”) 6
3
Number of inserts in half size module 400mm (15¾”) x 300mm (11¾”)
C 300
D 400
ABS e.g.
Type B insertion Length 400mm (15¾”) Width 600mm (235/8”) Type C insertion Length 400mm (15¾”) Width 300mm (11¾”) Type D insertion Length 300mm (11¾”) Width 400mm (15¾”) Materials 5
Colors available for sides and back on SCANCELL carts
Light gray (Standard)
Item no. 41-A453S Light green
Item no. 41-A857S Light blue
Item no. 41-A838S Medium blue
Item no. 41-A828S Pink
Item no. 41-A431S Red
Besides the gray standard color, the Scancell carts can be mounted with colored plates on the sites and back with the colors shown on this page without extra costs. By choosing colored plates, you put your own personal image into departments or sections in the hospital or the rest home.
Item no. 41-A464S Yellow
6
Note: Add the color no. directly in connection with the item no. of your choosen SCANCELL cart.
ScanCell carts
Interior and exterior measurements type A
Red letters = exterior measurements - Black letters = interior measurements - Measurements = mm/inch. Depth type A = 706mm (27¾”)
905
462
462 mm (18½”) 924 mm (363/8”) 1386 mm (545/8”) 905 mm (355/8”) 400 mm (16”) 612 mm (243/8”)
A-M060
8 insertions 7 with rolling doors
AA-M060
2x8 insertions 2x7 with rolling doors
1055
400 mm (16”) 762 mm (30”)
A-M075
AA-M075
2x10 insertions 2x9 with rolling doors
1205 mm (47½”) 1205
A-M090
In practice the possibilities for insertions depend on the height on the modules to be inserted.
AAA-M060
3x8 insertions 3x7 with rolling doors
AAA-M075
3x10 insertions 3x9 with rolling doors
ScanCell carts with rolling doors have one insertion less.
400 mm (16”) 912 mm (357/8”)
AA-M090
12 insertions 11 with rolling doors
The mentioned insertion possibilities are to be understood as maximum straight insertions into the VARIO panels in ScanCell carts. The distance between the insertions is 75 mm.
1055 mm (41½”)
10 insertions 9 with rolling doors
1386
924
AAA-M090
2x12 insertions 2x11 with rolling doors
3x12 insertions 3x11 with rolling doors
AA-M120
AAA-M120
1503 mm (591/8”)
1503
400 mm (16”) 1212 mm (48”)
A-M120
16 insertions 15 with rolling doors
2x16 insertions 2x15 with rolling doors
3x16 insertions 3x15 with rolling doors
AA-M150
AAA-M150
1803 mm (71”)
1803
400 mm (16”) 1512 mm (59½”)
A-M150
20 insertions 19 with rolling doors
8
2x20 insertions 2x19 with rolling doors
3x20 insertions 3x19 with rolling doors
Interior and exterior measurements type B
Red letters = exterior measurements - Black letters = interior measurements - Measurements = mm/inch. Depth type B = 494mm (19½”) 1324
662
1986
662 mm (26 /8”) 1324 mm (521/8”) 1986 mm (781/4”) 905 mm (355/8”)
905
1
B-M060
8 insertions 7 with rolling doors
600 mm (235/8”) 612 mm (243/8”)
BB-M060
BBB-M060
2x8 insertions 2x7 with rolling doors
3x8 insertions 3x7 with rolling doors
BB-M075
BBB-M075
1055 mm (41½”) 1055
600 mm (235/8”) 762 mm (30”)
B-M075
10 insertions 9 with rolling doors
2x10 insertions 2x9 with rolling doors
3x10 insertions 3x9 with rolling doors
BB-M090
BBB-M090
1205 mm (47¼”) 1205
600 mm (235/8”) 912 mm (357/8”)
B-M090
12 insertions 11 with rolling doors
2x12 insertions 2x11 with rolling doors
3x12 insertions 3x11 with rolling doors
BB-M120
BBB-M120
1503 mm (591/8”)
1503
600 mm (235/8”) 1212 mm (48”)
B-M120
16 insertions 15 with rolling doors
2x16 insertions 2x15 with rolling doors
3x16 insertions 3x15 with rolling doors
BB-M150
BBB-M150
1803 mm (71”)
1803
600 mm (235/8”) 1512 mm (59½”)
B-M150
20 insertions 19 with rolling doors
2x20 insertions 2x19 with rolling doors
3x20 insertions 3x19 with rolling doors
9
Open fronts
“
• The carts can be supplied with either drawers, hinged doors, rolling doors, or simply delivered with just an open front. • Mounted with angled/horizontal VARIO panel walls inside. These walls can be used with our specially designed support wheels. • The carts can be equiped with telescopic runners allowing 110% extension. • Equipped with 4 swivel wheels (2 with brakes). • Injection molded ABS top and platform. • Corner profiles are made of aluminum. • Sides and back are made from high-pressure laminate. • Standard color gray. Different colors are available. • Utility rails for accessories can be mounted on carts. • Please be aware of that all modules shown in ScanCell carts with open fronts are extra.
Open ScanCell carts 1 section
400 600
1
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M060 = H 905mm (355/8”) Type A-M075 = H 1055mm (41½”) Type A-M090 = H 1205mm (47½”)
400
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-M060 = H 905mm (355/8”) Type B-M075 = H 1055mm (41½”) Type B-M090 = H 1205mm (47½”)
40-411100 ScanCell cart
2
400 600
3
1
600
400
600
Open with Vario panels Type A-M060 - H 905mm (355/8”) 4 40-611100 ScanCell cart Open with Vario panels Type B-M060 - H 905mm (355/8”)
600
400
400
40-412100 ScanCell cart
600
5
4
3
Open with Vario panels Type A-M075 - H 1055mm (41½”) 40-612100 ScanCell cart
Open with Vario panels Type B-M075 - H 1055mm (41½”) 40-413100 ScanCell cart
600
400 600
7
6
5
400
6
Open with Vario panels Type A-M090 - H 1205mm (47½”) 8 40-613100 ScanCell cart Open with Vario panels Type B-M090 - H 1205mm (47½”)
7
8
11
Open ScanCell carts 1 section
400 600
1
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M120 = H 1503mm (591/8”) Type A-M150 = H 1803mm (71”)
600
400
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-M120 = H 1503mm (591/8”) Type B-M150 = H 1803mm (71”)
2
1
600
400
400
40-414100 ScanCell cart
600
3
Open with Vario panels Type A-M120 - H 1503mm (591/8”)
4
40-614100 ScanCell cart
Open with Vario panels Type B-M120 - H 1503mm (591/8”)
4
3
600
400
400
40-415100 ScanCell cart
600
5
Open with Vario panels Type A-M150 - H 1803mm (71”)
6
40-615100 ScanCell cart
Open with Vario panels Type B-M150 - H 1803mm (71”)
5
12
6
Open ScanCell carts 2 and 3 sections
40-812100 Double ScanCell cart
400
400
600
1
Open with Vario panels Type AA-M075 - H 1055mm (41½”) 40-811100 Type AA-M060 - H 905mm (355/8”) 40-813100 Type AA-M090 - H 1205mm (47½”) 40-212100 Double ScanCell cart
600
600
400
2
1
Open with Vario panels Type BB-M075 - H 1055mm (41½”) 40-211100 Type BB-M060 - H 905mm (355/8”) 40-213100 Type BB-M090 - H 1205mm (47½”) 40-911100 Triple ScanCell cart
400
400
400
600
3
2
Open with Vario panels Type AAA-M060 - H 905mm (355/8”) 40-91210 Type AAA-M075 - H 1055mm (41½”) 40-913100 Type AAA-M090 - H 1205mm (47½”) 40-111100 Triple ScanCell cart Open with Vario panels Type BBB-M060 - H 905mm (355/8”) 40-112100 Type BBB-M075 - H 1055mm (41½”) 40-113100 Type BBB-M090 - H 1205mm (47½”)
3
4
600
600
400
600
4
13
Open ScanCell carts 2 and 3 sections
400
400
600
400
400
400
600
40-814100 Double ScanCell cart Open with Vario panels Type AA-M120 - H 1503mm (591/8”) 40-815100 Type AA-M150 - H 1803mm (71”) 1
40-915100 Triple ScanCell cart Open with Vario panels Type AAA-M150 - H 1803mm (71”) 40-915100 Type AAA-M120 - H 1503mm (591/8”) 1
1
2
400
600
600
600
600
600
400
40-214100 Double ScanCell cart Open with Vario panels Type BB-M120 - H 1503mm (591/8”) 40-215100 Type BB-M150 - H 1803 (71”) 2
40-115100 Triple ScanCell cart
Open with Vario panels Type BBB-M150 - H 1803mm (71”) 40-114100 Type BBB-M120 - H 1503mm (591/8”)
2
14
Doors
“
• Doors made in MDF covered with a post-form plastic finish. • Tall double and triple carts for storage or transportation. • Doors can be delivered with locks. • Glassed doors available. • Please be aware of that all modules shown in ScanCell carts with doors are extra.
”
ScanCell carts with doors 1 section
1
600
400
Measurements -Type A
ScanCell carts with 125mm wheels (5”) Type A-M060 = H 905mm (355/8”) Type A-M075 = H 1055mm (40½”) Type A-M090 = H 1205mm (47½”)
400
2
Measurements-Type B
ScanCell carts with 125mm wheels (5”) Type B-M060 = H 905mm (355/8”) Type B-M075 = H 1055mm (40½”) Type B-M090 = H 1205mm (47½”)
40-471101 ScanCell cart Right hinged door Type A-M060-H 905mm (355/8”) (Left hinged door 40-471102)
1
3
4
2
400
600
600
400
600
40-661100 ScanCell cart
With 2 doors Type B-M060 -H 905mm (355/8”) 4
3
400
600
400
40-472101 ScanCell cart
600
5
Right hinged door Type A-M075 -H1055mm (41½”) (Left hinged door 40-472102) 40-662100 ScanCell cart
With 2 doors Type B-M075-H1055mm (41½”)
40-473101 ScanCell cart
400 600
7
6
5
600
400
6
Right hinged door Type A-M090-H1205mm (47½”) (Left hinged door 40-473102) 8
40-663100 ScanCell cart
With 2 doors Type B-M090-H1205mm (47½”) 7
16
8
ScanCell carts with doors 1 section
400 600
1
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M120 = H 1503mm (591/8”) Type A-M150 = H 1803mm (71”)
600
400
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-M120 = H 1503mm (591/8”) Type B-M150 = H 1803mm (71”)
2
1
4
600
400 600
400
40-474101 ScanCell cart Right hinged door Type A-M120 - H 1503mm (591/8”) (Left hinged door 40-474102) 3
40-664100 ScanCell cart
With 2 doors Type B-M120 - H 1503mm (591/8”) 4
3
600
400
400
40-475101 ScanCell cart
600
5
Right hinged door Type A-M150 - H 1803mm (71”) (Left hinged door 40-475102) 6
40-665100 ScanCell cart
With 2 doors Type B-M150 - H 1803mm (71”) 5
6
17
ScanCell carts with doors 2 and 3 sections
40-862100 Double ScanCell cart
400
400
600
1
With 2 doors Type AA-M075 - H 1055mm (41½”) (40-861100) Type AA-M060 (H905mm 355/8”) (40-863100) Type AA-M090 H1205mm (47½”) 40-262100 Double ScanCell cart
600
600
400
2
1
With 4 doors Type BB-M075 - H 1055mm (41½”) (40-261100) (Type BB-M060 H 905mm (355/8”) (40-263100) (Type BB-M090 H1205mm (47½”) 40-961100 Triple ScanCell cart
400
400
400
600
3
2
With 3 doors Type AAA-M060 - H 905mm (355/8”) (40-962100) (Type AAA-M075 H 1055mm (41½”) (40-963100) (Type AAA-M090 H1205mm (47½”) 40-161100 Triple ScanCell cart
600
600
600
400
4
3
With 6 doors Type BBB-M060 - H 905mm (355/8”) (40-162100) (Type BBB-M075) H 1055mm (41½”) (40-163100) (Type BBB-M090) H1205mm (47½”)
18
4
ScanCell carts with doors 2 and 3 sections
400
400
400
400
400
600
40-864100 Double ScanCell cart
600
1
With 2 doors Type AA-M120 - H 1503mm (591/8”) (40-865100) Type AA-M150 - H 1803mm (71”)
1
40-965100 Triple ScanCell cart
With 3 doors Type AAA-M150 - H 1803mm (71”) (40-964100) Type AAA-M120 - H 1503mm (591/8”)
1
600
600
600
600
600
400
40-264100 Double ScanCell cart
400
2
With 4 doors Type BB-M120 - H 1503mm (591/8”) (40-265100) Type BB-M150 - H 1803 mm (71”)
40-165100 Triple ScanCell cart With 6 doors Type BBB-M150 - H 1803mm (71”) (40-164100) Type BBB-M120 - H1503mm (591/8”) 2
2
19
Rolling doors
“
• Rolling doors are vacum-formed Polypropylene. • Rolling doors can be locked in an up or down position. • Carts can be equipped with specially designed brackets for the removal and cleaning of rolling doors. (See ScanCell accessories). •
Please be aware of that all modules shown in ScanCell carts with rolling doors are extra.
”
ScanCell carts with rolling doors 1 section
1
600
400
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M060 = H 905mm (355/8”) Type A-M075 = H 1055mm (41½”) Type A-M090 = H 1205mm (47½”) D = down - U = up
400
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-M060 = H 905mm (35 5/8”) Type B-M075 = H 1055mm (41½”) Type B-M090 = H 1205mm (47½”) D = down - U = up
40-451100D ScanCell cart
2
400 600
3
1
600
400
600
With door rolling down Type A-M060 - H 905mm (355/8”) 40-651100U ScanCell cart
With door rolling up Type B-M060 - H 905mm (35/8”) (Rolling front down 40-651100D) 40-452100D ScanCell cart
400 600
5
4
3
600
400
4
With door rolling down Type A-M075 - H 1055mm (41½”) 40-652100U ScanCell cart
With door rolling up Type B-M075 - H 1055mm (41½”) (Rolling front down 40-652100D) 40-453100D ScanCell cart
400 600
7
6
5
600
400
6
With door rolling down Type A-M090 - H 1205mm (47½”) 8
40-653100U ScanCell cart
With Rolling front up Type B-M090 - H 1205mm (47½”) (Rolling front down 40-653100D)
7
8
21
ScanCell carts with rolling doors- 1 section
400 600
1
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M120 = H 1503mm (59 1/8”) Type A-M150 = H 1803mm (71”) D = down - U = up
400
600
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-120 = H 1503mm (59 1/8”) Type B-150 = H 1803mm (71”) D = down - U = up 2
1
600
400
400
40-454100D ScanCell cart
600
3
With door rolling down Type A-M120 - H 1503mm (591/8”)
4
40-654100D ScanCell cart
With door rolling down Type B-M120 - H 1503mm (591/8") (Rolling front up 40-654100U) 4
3
600
400
400
40-455100D ScanCell cart
600
5
With door rolling down Type A-M150 - H 1803mm (71”) 6
40-655100U ScanCell cart
With door rollings down Type B-M150 - H 1803mm (71”) (Rolling front up 40-655100D) 5
22
6
ScanCell carts with rolling doors 2 and 3 sections 40-852100D Double ScanCell cart
400
400
600
1
With doors rolling down Type AA-M075 - H 1055mm (41½”)
1
40-252100D Double ScanCell cart
600
600
400
2
With doors rolling down Type BB-M075 - H 1055mm (41½”) (Rolling fronts up 40-252100U)
2
40-952100D Triple ScanCell cart
400
400
400
600
3
With doors rolling down Type AAA-M075 - H 1055mm (41½”)
3
40-152100D Triple ScanCell cart
600
600
600
400
4
With doors rolling down Type BBB-M075 - H 1055mm (41½”) (Rolling fronts up 40-151100U)
4
23
ScanCell carts with rolling doors 2 and 3 sections 400
400
400
400
400
600
40-855100D Double ScanCell cart
600
1
With Roller Shutter down Type AA-M150 - H 1803mm (71”) (40-854100D) Type AA-M120 - H 1503mm (591/8") 1
40-954100D Triple ScanCell cart
With Roller Shutter down Type AAA-M120 - H 1503mm (59 1/8”) (40-955100D) Type AAA-M150 - H 1803mm (71”)
1
600
600
600
600
600
400
40-255100D Double ScanCell cart
400
2
With Roller Shutter down Type BB-M150 - H 1803mm (71”) (40-254100D) Type BB-M120 - H 1503mm (591/8”) 2
40-154100D Triple ScanCell cart
With Roller Shutter down Type BBB-M120 - H 1503mm (591/8”) (40-155100D) Type BBB-M150 - H1803mm (71”)
2
24
• For trays and baskets measuring 600 x 400mm ( 235/8 x 15¾”). • Standard colors light gray fronts and dark blue handles. • Available in assorted colors. • VARIO drawers can be exchanged individually in each cart • Please be aware of that partitions shown in VARIO drawers are extra. (Modules included).
”
VARIO runner drawers
“
• Injection molded ABS trays, handles and baskets.
ScanCell carts with VARIO drawers
600
400
1
Measurement Type B
ScanCell cart w/ 125mm wheels (5”) VARIO panel for angled/straight insertion Type B-M060 = H 905mm (355/8”) Type B-M075 = H 1055mm (41½”) 2
VARIO drawers
The drawers are modular containers made with drawer-fronts and handles. Some containers can be divided with partitions. Color of standard front - gray Color of standard handle - blue
2
600
600
400
3 40-641500 ScanCell cart Type B-M060 - H905mm (355/8”)
1
400
400
600
Included 4 VARIO drawers: 1x 50mm (2”)= 20-64206 for partitions 2x100mm (4”)= 20-64211 for partitions 1x200mm (8”)= 20-64220
4
40-642500 ScanCell cart Type B-M075 - H1055mm (41½”)
Included 5 VARIO drawers: 1x 50mm (2”)= 20-64206 for partitions 3x100mm (4”)= 20-64211 for partitions 1x200mm (8”)= 20-64220
600
600
400
400
5 40-641540 ScanCell cart Type B-M060 - H905mm (355/8”)
4
3
Included 4 VARIO drawers: 4x100mm (4”) = 20-64211 for partitions
6
40-642550 ScanCell cart Type B-M075 - H 1055mm (41½”)
Included 5 VARIO drawers: 5x100mm (4”) = 20-64211 for partitions 6
5
600
400
600
400
7 40-641550 ScanCell cart Type B-M060 - H 905mm (355/8”) Included 5 VARIO drawers: 2x 50mm (2”) = 20-64206 for partitions 3x100mm (4”) = 20-64211 for partitions
8
40-642560 ScanCell cart Type B-M075 - H 1055mm (41½”)
Included 6 VARIO drawers: 2x 50mm (2”) = 20-64206 for partitions 4x100mm (4”) = 20-64211 for partitions 7
26
8
ScanCell carts with VARIO drawers
400 600
1
Measurements Type B
ScanCell cart w/ 125mm wheels (5”) Type B-M090 = H 1205mm (47½”) Type B-M120 = H 1503mm (591/8”)
400
600
2
VARIO drawers
The drawers are modular containers equipped with drawer-front and handle. Some containers can be divided with partitions. Color of standard front - gray Color of standard handle - blue 2
1
600
600
400
400
3 40-643500 ScanCell cart Type B-M090 - H 1205mm (47½”) Included 6 VARIO drawers: 1x 50mm (2”) = 20-64206 for partitions 4x100mm (4”) = 20-64211 for partitions 1x200mm (8”) = 20-64220
4 40-644580 ScanCell cart Type B-M120 - H 1503mm (591/8”) Included 8 VARIO drawers: 1x 50mm (2”) = 20-64206 for partitions 6x100mm (4”) = 20-64211 for partitions 1x200mm (8”) = 20-64220
4
3
600
400
600
400
5 40-643560/02 ScanCell cart Type B-M090 - H 1205mm (47½”) Included 6 VARIO drawers: 2x 50mm (2”) = 20-64206 for partitions 2x100mm (4”) = 20-64211 for partitions 2x200mm (8”) = 20-64220
6 40-644570 ScanCell cart Type B-M120 - H 1503mm (591/8”) Included 7 VARIO drawers: 1x 50mm (2”) = 20-64206 for partitions 4x100mm (4”) = 20-64211 for partitions 1x200mm (8”) = 20-64220 1x300mm (12”) = 20-64228
5
6
27
ScanCell carts with VARIO drawers
40-241500 Double ScanCell cart
600
600
400
1
Type BB-M060 - H 905mm (355/8”) Included 8 VARIO drawers: 2x 50mm (2”) = 20-64206 for partitions 4x100mm (4”) = 20-64211 for partitions 2x200mm (8”) = 20-64220
1
40-242500 Double ScanCell cart
600
600
400
2
Type BB-M075 - H 1055mm (41½”) Included 10 VARIO drawers: 2x 50mm (2”) = 20-64206 for partitions 6x100mm (4”) = 20-64211 for partitions 2x200mm (8”) = 20-64220
2
40-141500 Triple ScanCell cart
600
600
600
400
3
Type BBB-M060 - H905mm (355/8”) Included 12 VARIO drawers: 3x 50mm (2”) = 20-64206 for partitions 6x100mm (4”) = 20-64211 for partitions 3x200mm (8”) = 20-64220
3
40-142500 Triple ScanCell cart
600
600
600
400
4
Type BBB-M075 - H 1055mm (41½”) Included 15 VARIO drawers: 3x 50mm (2”) = 20-64206 for partitions 9x100mm (4”) = 20-64211 for partitions 3x200mm (8”) = 20-64220
4
28
ScanCell VARIO drawers
The VARIO drawers can be inserted in all types of open ScanCell products. Below is a calculation schedule for VARIO drawers, quantities of VARIO drawers in a ScanCell section. All VARIO drawers with colored front are with gray gribs. All VARIO drawers with fronts in gray are with blue gribs.
Heights
M60
M75
Height 722 mm 28 3/8” 8 insertion units
Height 872 mm 34 5/8” 10 insertion units
M90
Height 1022 mm 40 1/4” 12 insertion units
M120
Height 1319 mm 51 7/8” 16 insertion units
M150
Height 1620 mm 63 3/4” 20 insertion units
VARIO drawers complete, some for seperation with partitions
1 unit insertion
41-8205 1 - Light gray (Standard) 41-82052 - Light green 41-82053 - Light blue 41-82054 - Medium blue 41-82055 - Pink 41-82056 - Red 41-82057 - Yellow
2 units insertion
41-8210 1 - Light gray (Standard) 41-82102 - Light green 41-82103 - Light blue 41-82104 - Medium blue 41-82105 - Pink 41-82106 - Red 41-82107 - Yellow
3 units insertion
41-8220 1 - Light gray (Standard) 41-82202 - Light green 41-82203 - Light blue 41-82204 - Medium blue 41-82205 - Pink 41-82206 - Red 41-82207 - Yellow
2 units insertion
41-821 11 - Light gray (Standard) 41-82112 - Light green 41-82113 - Light blue 41-82114 - Medium blue 41-82115 - Pink 41-82116 - Red 41-82117 - Yellow
3 units insertion
4 units insertion
41-8221 1 - Light gray (Standard) 41-82212 - Light green 41-82213 - Light blue 41-82214 - Medium blue 41-82215 - Pink 41-82216 - Red 41-82217 - Yellow
41-8230 1 - Light gray (Standard) 41-82302 - Light green 41-82303 - Light blue 41-82304 - Medium blue 41-82305 - Pink 41-82306 - Red 41-82307 - Yellow
Colors available for fronts Light gray (Standard)
Item no. 41-A453S light green
Item no. 41-A857S Light blue
Item no. 41-A838S Medium blue
Item no. 41-A828S Pink
Item no. 41-A431S Red
Item no. 41-A464S Yellow
29
Telescopic drawers
“
• Drawers that glide on sturdy telescopic runners. • Load capacity up to 80 kg (176 lbs). • The drawers can be drawn out 110%, so all the contents are visible and accessible. • Durable, lightweight, silent wheels - all carts are equipped with four swivel 125mm ( 5”). • Please be aware of that all modules shown in ScanCell carts with telescopic drawers are extra.
”
ScanCell carts with drawer frames for modules (telescopic drawers) 600
400
1
Measurements Type A
ScanCell carts with 125mm wheels (5”) Type A-M060 = H 905mm (355/8”) Type A-M075 = H 1055mm (41½”) Type A-M090 = H 1205mm (47½”) 400
2
Measurements Type B
ScanCell carts with 125mm wheels (5”) Type B-M060 = H 905mm (355/8”) Type B-M075 = H 1055mm (41½”) Type B-M090 = H 1205mm (47½”)
40-421500 ScanCell cart
2
400 600
3
1
600
400
600
With 4 drawers 1x50-2x100-1x200mm (2x4x8”) Type A-M060 - H 905mm (355/8”) 40-621500 ScanCell cart
With 4 drawers 1x50-2x100-1x200mm (2x4x8”) Type B-M060 - H 905mm (355/8”) 40-421540 ScanCell cart
400 600
5
4
3
600
400
4
With 4 drawers 4x100mm (4”) Type A-M060 - H 905mm (355/8”) 40-621540 ScanCell cart
With 4 drawers 4x100mm (4”) Type B-M060 - H 905mm (355/8”) 40-421550 ScanCell cart
400 600
7
6
5
600
400
6
With 5 drawers 2x50-3x100mm (2x4”) Type A-M060 - H 905mm (355/8”) 8
40-621550 ScanCell cart
With 5 drawers 2x50-3x100mm (2x4”) Type B-M060 - H 905mm (355/8”)
7
8
31
ScanCell carts with drawer frames for modules (telescopic drawers)
600
400
600
400
40-422500 ScanCell cart With 5 drawers 1x50-3x100-1x200mm (2x4x8”) Type A-M075 - H 1055mm (41½”) 1
2
40-622500 ScanCell cart With 5 drawers 1x50-3x100-1x200mm (2x4x8”) Type B-M075 - H 1055mm (41½”) 40-422550 ScanCell cart With 5 drawers 5x100mm (2x4”) Type A-M075 - H 1055mm (41½”)
2
1
3
400
600
600
400
40-622550 ScanCell cart With 5 drawers 5x100mm (4”) Type B-M075) - H 1055mm (41½”) 4
5
600
400 600
400
40-422560 ScanCell cart With 6 drawers 2x50-4x100mm (2x4”) Type A-M075 - H 1055mm (41½”)
4
3
40-622560 ScanCell cart With 6 drawers 2x50-4x100mm (2x4”) Type B-M075 - H 1055mm (41½”) 6
40-422509 ScanCell cart With 10 drawers 10x50mm (2”) Type A-M075 - H 1055mm (41½”)
6
5
7
8
400 600
400
40-622509 ScanCell cart
With 10 drawers 10x50mm (2”) Type B-M075 - H 1055mm (41½”)
32
600
7
8
ScanCell carts with drawer frames for modules (telescopic drawers) 600
400 600
400
40-423500 ScanCell cart With 6 drawers 1x50-4x100-1x200mm (2x4x8”) Type A-M090 - H 1205mm (47½”) 1
40-623500 ScanCell cart With 6 drawers 1x50-4x100-1x200mm (2x4x8”) Type B-M090 - H 1205mm (47½”) 2
600
400
400
40-423560 ScanCell cart (medicine)
600
3
2
1
With 6 drawers 6x100mm (4”) Type A-M090 - H 1205mm (47½”) 40-623560 ScanCell cart (medicine)
With 6 drawers 6x100mm (4”) Type B-M090 - H 1205mm (47½”) 40-423570 ScanCell cart With 7 drawers 2x50-5x100mm (2x4”) Type A-M090 - H 1205mm (47½”)
4
3
5
400 600
40-623570 ScanCell cart With 7 drawers 2x50-5x100mm (2x4”) Type B-M090 - H 1205mm (47½”)
600
400
4
6
7
8
400
600
400
600
40-423590 ScanCell cart With 9 drawers 6x50-3x100mm (2x4”) Type A-M090 - H 1205mm (47½”)
6
5
40-623590 ScanCell cart
With 9 drawers 6x50-3x100mm (2x4”) Type B-M090 - H 1205mm (47½”)
7
8
33
ScanCell carts with drawer frames for modules
40-221500 Double ScanCell cart
600
600
400
1
With 4 drawers in each section 1x50-2x100-1x200mm (2x4x8”) Type BB-M060 H 905mm (355/8”)
1
40-921500 Triple ScanCell cart
400
400
400
600
2
With 4 drawers in each section 1x50-2x100-1x200mm (2x4x8”) Type AAA-M060 H 905mm (355/8”)
2
34
• Carts with combination of glassed doors and drawers. • All light construction, manufactured from plastic, aluminium and laminate.
”
• Please be aware of that all modules shown in ScanCell combi carts are extra.
Combi carts
“
• With ScanCell Combi carts opens a wide range of possibilities for individual designed arrangements, to suit specific requirements.
ScanCell combi carts
600
400
400
40-481811 Combi cart
600
1
With 1 drawer 1x50mm (2”) and door right hinged Type A-M060 - H 905mm (355/8”) 2
40-681815 Combi cart
With 1 drawer 1x50mm (2”) and 2 doors Type B-M060 - H 905mm (355/8”)
1
400
600
400
40-482821 Combi cart
600
3
2
With 2 drawers 1x50-1x100mm (2x4”) and door right hinged Type A-M075 - H 1055mm (41½”) 4
40-682825 Combi cart
With 2 drawers 1x50-1x100mm (2x4”) and 2 doors Type B-M075 - H 1055mm (41½”)
4
3
400
600
400
40-682825/04 Combi cart
600
5
With 2 drawers 1x50-1x100mm (2x4”) Asymmetric door. Cassette with 2 shelves in 30x40 panels + 2 inserts for X-ray. Type B-M075-H 1055mm (41½”) 6
40-482925 Combi cart
With 2 drawers 1x50-1x100mm (2x4”) Asymmetric door. Cassette with shelf + 30x40 panels. Type B-M075-H 1055mm (41½”)
5
36
6
ScanCell combi carts
600
400
400
40-483831 Combi cart
600
1
With 3 drawers 1x50-2x100mm (2x4”) and door right hinged Type A-M090 - H 1205mm (47½”)
2
40-683835 Combi cart
With 3 drawers 1x50-2x100mm (2x4”) and 2 doors Perforated rail for telescopic runners Type B-M090 - H 1205mm (47½”) 1
400
600
400
40-483829D Combi cart
600
3
2
With 2 drawers 1x50-1x100mm (2x4”) and rolling front (D) Type A-M090 - H 1205mm (47½”)
4
40-683829U Combi cart
With 2 drawers 1x50-1x100mm (2x4”) and rolling front (U) Type B-M060 - H 905mm (355/8”)
4
3
40-281815/01 Double Combi cart. An exsample for possibilities with SMS ScanCell
600
600
400
5
With 1 drawer 1x50mm (2”) 2 doors and 2 glassed doors Type BB-M060 - H 905mm (355/8”)
5
37
ScanCell combi carts
40-484841 Combi cart
600
400
400 600
1
With 4 drawers 1x50-2x100-1x200mm (2x4x8”) and door right hinged Type A-M120 - H 1503mm (591/8”)
2
40-684846 Combi cart
With 4 drawers 1x50-2x100-1x200mm (2x4x8”) and 2 glassed doors Type B-M120 - H 1503mm (591/8”) 2
1
40-685806U Combi cart
600
400
600
400
3
Rolling front (U), and 2 glassed doors Type B-M150 - H 1803mm (71”)
4
40-685856 Combi cart
With 5 drawers 3x50-1x100-1x200mm (2x4x8”) and 2 glassed doors Type B-M150 - H 1803mm (71”)
3
400
400
600
600
400
40-884871/01 Double Combi cart
600
5
4
With 7 drawers 1x50-3x100-3x200mm (2x4x8”) and 1 door Type AA-M120 - H 1503mm (591/8”)
6
40-285830 Double Combi cart
With 2x3 drawers 6x300mm (8”) and 2 rolling fronts (D) Type BB-M150 - H 1803mm (71”)
5
38
6
ScanCell combi chart/filing carts
400
600
400
40-492100 Chart cart
600
1
With 1 drawer 300mm (12”) X-ray cassette included Type A-M075 - H 1055mm (41½”)
40-692100 Chart cart
With 1 drawer 300mm (12”) X-ray cassette included Type B-M075 - H 1055mm (41½”)
40-493100 Chart cart
400 600
3
2
1
600
400
2
With 2 drawers 1x100-1x300mm (4x12”) X-ray cassette included Type A-M090 - H 1205mm (47½”)
40-693200 Chart cart
With 2 drawers 1x100-1x300mm (4x12”) X-ray cassette included Type B-M090 - H 1205mm (47½”)
40-423530/01 Filing cart
600
400 600
5
4
3
400
4
With 3 drawers 1x50-2x300mm (2x12”) Type A - H 1136mm (44¾”) 6
40-623530/01 Filing cart
With 3 drawers 1x50-2x300mm (2x12”) Type B - H 1150mm (45¼”) 5
40-621530/01 Chart cart
With 3 drawers 1x300-2x100mm (12x4”) Type B-M060 - H 905mm (355/8”) Top chart board 41-10012 670x500mm (263/8x19¾”) Side chart board 41-10010 500x350mm (19 ¾”x13 ¾”) 2 chart boards, can be opened and titled. Top chart board can be positiononed in various positions. Suitable for any ward where the need for information in large paper format is present.
600
400
7
6
7
39
ScanCell combi carts
40-482621 Combi cart
400
600
400
600
1
With 2 drawers 1x50-1x100 mm and 1 door right hinged Perforated rail for telescopic runners Type A-M075 - H 1055mm 2
40-682625 Combi cart
With 2 drawers 1x50-1x100 mm and 2 doors Perforated rail for telescopic runners Type B-M075 - H 1055mm
18-67303 Telescopic runners
400
600
400
600
3
2
1
Type A - per set. For inserting modules
4
18-67310 Telescopic runners
Type B - per set. For inserting modules. 4
3
600
600
400
41-16091M Top for EDP equipment
400
5
Space for lap-top, placed under lid. Mechanical digital lock. The top mounted on the cart. 41-16090M Identical, but with a key-lock 6
41-16092M Top for EDP equipment
Space for lap-top under lid with lock. Groove for the lap-top screen. The topis hinged and locked, can be opened for service 41-16093M Identical, but with digital lock 7
5
6
7
8
41-50142 Monitor stand
Side mounted monitor stand with adjustable arm 8
41-50140 Monotor stand
Top mounted monitor stand with adjustable arm
40
• Anesthesia carts. • Crash carts. • Critical care carts. • Treatment and procedure carts. • Syringe carts. • Changing carts. • Multi-function carts. • Chart carts. • Pharmacy carts. • Plaster carts. • Please be aware of that all modules shown in ScanCell multi-funtion carts are extra.
”
Multi-function carts
“
• ScanCell workstations can be built to suit different locations.
ScanCell Multi-function carts
40-621510 Change cart - Type B-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
1
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Yellow modular insert (240x120x50mm) (9½x4¾x2”) with transparent lid and holder • 12L (3.1 gal) bin and holder • Hook attached on the back side of the cart for hanging accessories Note: Modules not included 1
40-621511 Syringe cart - Type B-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
2
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Up-stand for Type B cart with 3 rows of dispenser cassettes (1x4bin; 1x5bin; 1x6bin) • Hook attached on the back side of the cart for hanging accessories Note: Modules not included 2
40-621512 Crash cart - Type B-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
3
Includes the following accessories: • Gallery-top for partitions with Acrylic-lid for defribrilator • Utility rail on 3 sides for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Multi-purpose holder with an infusion stand • Holder for oxygen cylinder • Resuscitation plate attached on the rear-side of the trolley • Electric strip for 6 plugs. Holder included Note: Modules not included
42
3
ScanCell Multi-function carts
40-621513 Anesthesia cart - Type B-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
1
Includes with the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Multi-purpose holder with an infusion stand • Up-stand for Type B cart with 3 rails and 2 rows of dispenser cassettes (1x4bin; 1x5bin) Note: Modules not included 1
40-621515 Crash cart - Type B-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
2
Includes the following accessories: • Gallery-top • Utility rail on 3 sides for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Multi-purpose holder with an infusion rod • Holder for oxygen cylinder • Resuscitation plate attached on the rear-side of the trolley • Outlet strip for 6 plugs. Holder included • Shackle lock with holder for sealing device • Revolving arm for monitor
2
Note: Modules not included 3
40-622510 Treatment cart - Type B-M075 - H1055mm (41½”) 5 extensions on telescopic drawers 1x50 - 3x100 - 1x200mm (1x2 - 3x4 - 1x8”)
400
600
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Hook attached on the back side of the cart for hanging accessories Note: Modules not included 3
43
ScanCell Multi-function carts
1
40-661110 Change cart - Type B-M060 - H905mm (355/8”) 2 doors
Includes the following accessories: • Gallery-top • Utility-rail on left and right side for hanging accessories • Holder for disposable gloves • Yellow modular insert (240x120x50mm) (9½x4¾x2”) with transparent lid and holder • 12L (3.1 gal) bin and holder • Hook attached on the back side of the cart for hanging accessories
1
2
40-661111 Syringe cart - Type B-M060 - H905mm (355/8”) 2 doors
includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1gal) bin and holder • Up-stand for Type B cart with 3 rows of dispenser cassettes (1x4bin; 1x5bin; 1x6bin) • Hook attached on the back side of the cart for hanging accessories
2
3
40-662110 Treatment cart - Type B-M075 - H1055mm (41½”) 2 doors
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Hook attached on the back side of the cart for hanging accessories
3
44
ScanCell Multi-function carts
40-662111 Multi-function cart - Type B-M075 - H1055mm (41½”) 2 doors
600
400
1
Includes the following accessories: • Gallery-top • Utility-rail on left and right side for hanging accessories • 12L (3.1 gal) bin and holder
1
40-664110 Change cart - Type B-M120 - H1503mm (591/8”) 2 doors
600
400
2
Includes the following accessories: • Utility rail on left and right side for hanging accessories • 12L (3.1gal) bin and holder
2
40-681810 Changing cart - Type B-M060 - H905mm (355/8”) 1 drawer on telescopic runner 1x50mm (1x2”) and 2 doors
600
400
3
Includes the following accessories: • Gallery-top • Blue mattress (820x620x45mm ) (32¼x243/8x 1¾”) • Utility rail on right side for hanging accessories • 12L (3.1 gal) bin and holder • Extension frame, blue Note: Container in extension frame is not included
3
45
ScanCell Multi-function carts
40-682810 Combination cart - Type B-M075 H1055mm (41½”) 2 drawers on telescopic drawers 1x50 - 1x100mm (1x2-1x4”) and 2 doors
600
400
1
Includes the following accessories: • Utility rail on left and right side for hanging accessories • 12L (3.1 gal) bin and holder Note: Modules not included
1
40-692110 Chart cart - Type B-M075 - H1055mm (41½”) 1 extension on telescopic runner 1x300mm (1x12”)
600
400
2
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • 9-section storage unit for X-ray files • 12L (3.1 gal) bin and holder • Hook attached on the left side of the cart for hanging accessories Note: Container in extension frame not included
2
40-693210 Chart cart - Type B-M090 - H1205mm (47½”) 2 extensions on telescopic drawers 1x100 - 1x300mm (1x4 - 1x12”)
600
400
3
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • 9-section storage unit for X-ray files • 12L (3.1 gal) bin and holder • Hook attached on the left side of the cart for hanging accessories Note: Modules not included
3
46
ScanCell Multi-function carts
40-641510 Change cart - Type B-M060 - H905mm (355/8”) 4 extensions Vario with plastic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
1
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Yellow modular insert (240x120x50mm) (9½x4¾x2”) with transparent lid and holder • 12L (3.1 gal) bin and holder • Hook attached on the back side of the cart for hanging accessories • 4 pcs. trays (drawers) 1x50mm (2”) - (20-64206) - 2x100mm (4”) - (20-64211) - 1x200mm (8”) - (20-64220) 1
40-641511 Syringe cart - Type B-M060 - H905mm (355/8”) 4 extensions Vario with plastic drawers 1x50 - 2x100 - 1x200mm (1x2 - 2x4 - 1x8”)
600
400
2
Includes the following accessories: • Gallery-top • Utility-rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal) bin and holder • Up-stand for Type B cart with 3 rows of dispenser cassettes (1x4bin; 1x5bin; 1x6bin) • Hook attached on the back side of the car for hanging accessories • 4 pcs. trays (drawers) 1x50mm (2”) - (20-64206) - 2x100mm (4”) - (20-64211) - 1x200mm (8”) - (20-64220) 2
40-642510 Treatment cart - Type B-M075 - H1055mm (41½”) 5 extensions Vario with plastic drawers 1x50 - 3x100 - 1x200mm (1x2 - 3x4 - 1x8”)
600
400
3
Includes the following accessories: • Gallery-top • Utility rail on left and right side for hanging accessories • Holder for disposable gloves • Hazardous waste container and holder • 12L (3.1 gal bin and holder • Hook attached on the back side of the cart for hanging accessories • 5 pcs. trays (drawers) 1x50mm (2”) - (20-64206) - 3x100mm (4”) - (20-64211) - 1x200mm (8”) - (20-64220) 3
47
ScanCell Multi-function carts
40-M462110 Pharmacy cart - Type A-M075 - H1055mm (41½”) 1 door and 2 internal compartments
400 600
1
Includes the following accessories: • `Top` for storing bottles and waste • Utility-rail on 3 sides for hanging accessories • 12L (3.1 gal) bin and holder • Lock on door • 4-section frame for UNI-boxes Note: The UNI-boxes are not included UNI-boxes: please see chapter MODULES - Inserts for medicine
1
40-M622539 Pharmacy cart - Type B-M075 - H1055mm (41 ½”) 3 extensions on telescopic drawers 1x100 - 1x50 - 1x200mm (1x4 - 1x2 - 1x8”)
600
400
2
Includes the following accessories: • Top with storage for bottles and waste • Utility-rail on left and right side for hanging accessories • Writing plate, left side • Mounting with lock-system (lock all drawers and the cassette) • Cassette with 3 shelves for inserting Uni-boxes (mounted with lock) • Tray in extension 1x15mm (5/8”)
2
40-623539 Chart Cart - Type B - H1336mm (525/8”) 3 extensions on telescopic drawers 1x50 - 2x300mm (1x2 - 2x12”)
600
400
3
Multi-Function cart includes the following accessories: • Gallery-top • Counterbalanced • Utiltiy-rails on 3 sides • Holder for accessories • Holder for X-ray envelopes • Supports 600mm (235/8”) for A4 suspension files for 2 drawers Note: Modules not included
3
48
ScanCell Multi-function carts
40-881849/01 Changing cart Type AA-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 2x100 - 2x200mm (2x4 - 2x8”) and retrievable door
400
400
600
1
Includes the following accessories: • Gallery-top • Blue mattress 820x620x45mm (32¼x243/8x1¾”) • Rubbish bin with lid Note: Modules not included
1
40-881849/02 Plaster cart Type AA-M060 - H905mm (355/8”) 4 extensions on telescopic drawers 2x100 - 2x200mm (2x4 - 2x8”) and retractable door
400
Includes the following accessories: • Stainless-steel top • Utility rail on left and right side for hanging accessories • Extension frame for a 600x400mm (235/8x15¾) module • Holder for 3 boxes of disposable gloves. Box size: 240x130x70mm (9½x51/8x25/8) • Hazardous waste container and holder • Rubbish bin with lid • White bucket and holder • 3 hooks each 100mm (4”) hanging next to the dispenser cassettes • Up-stand for Type AA cart with 3 rows of dispenser cassettes (1x4bin; 1x5bin; 1x6bin) • Hook attached on the back side of the cart for hanging accessories
3
40-081000 Multi-Function cart Type BB+BB-M060 - H905mm (35 5/8”)
2
600
400
600
400
Note: Modules not included
400
600
2
• This ScanCell cart/ workstation is an example of the range of possibilities available with ScanCell carts. • The accessories shown on the picture are optional and not included with the cart.
3
49
Open steel carts
Open steel carts
“
• Lightweight and simply designed, supply/utility carts that allow easy access to and a clear overview of all the contents. • Equipped with 4 swivel wheels. • The carts are made of square metal tubing, epoxy covered. • Standard color is light gray RAL 7035. • Available in different colors. • Assorted accessories are available. • Please be aware of that all modules shown in open steel carts are extra.
”
Open steel carts
1 10-34705-Cart Without supporting rails, but modules can be placed in the top and bottom frames. Supporting rails or telescopic runners can be mounted. Wheels: 4 pcs., swivvel, dia. 75mm (3”) Measurements in mm (inch. see below)
300
400
10-34809-Cart 30/40 Insertion C 4 sets of VARIO supporting rails For modules 300x400mm (11¾x15¾”) Cart: 521x350xH850mm (20½x13¾x33½”) Wheels: 4 pcs., swivel, dia. 75mm (3”) 2
1
3 10-64705-Cart Without supporting rails, but modules can be placed in the top and bottom frames. Supporting rails or telescopic runners can be mounted. Wheels: 4 pcs., swivvel, dia. 75mm (3”) Measurements in mm (inch. see below)
2
400
600
10-64809-Cart 60/40 A-2 Insertion B 2 sets of VARIO supporting rails For modules 400x600mm (15¾x235/8”) Cart: 724x445xH850mm (28¾x17½x33½”) Wheels: 4 pcs., swivel, dia. 75mm (3”) 4
3
5 10-64710-Cart Without supporting rails, but modules can be placed in the top and bottom frames. Supporting rails or telescopic runners can be mounted. Wheels: 4 pcs., swivvel, dia. 75mm (3”) Measurements in mm (inch. see below)
400
600
6 10-64710– Cart 60/40 C Basic frame without supporting rails For modules 400x600mm (15¾x235/8”) Cart: 724x445xH850mm (28¾x17½x33½”) Wheels: 4 pcs., swivel, dia. 75mm (3”)
6
5
7 10-64818 -Cart 60/40 C-3
600
600
400
400
Insertion B 3 sets of VARIO supporting rails For modules 400 x 600mm (15¾x235/8”) Cart:724x445xH 850mm (28¾x17½x33½”) Wheels: 4 pcs., swivel, dia. 75mm (3”)
4
8 10-64817-Cart 60/40 C-4
Insertion B 4 sets of VARIO supporting rails For modules 400 x 600mm (15¾x235/8”) Cart: 724x445xH850mm (28¾x17½x33½”) Wheels: 4 pcs., swivel, dia. 75mm (3”)
7
8
69
Open steel carts
1 13-64750-Cart Without supporting rails, but modules can be placed in the top and bottom frames. Supporting rails or telescopic runners can be mounted. Wheels: 4 pcs., swivvel, dia. 75mm (3”) Measurements in mm (inch. see below)
400
600
13-64857- Cart 60/40 C-6 Insertion B 6 sets of VARIO supporting rails For modules 400x600mm (15¾x235/8”) Cart: 724x445xH1100mm (28¾x17½x43¼”) Wheels: 4 pcs.,swivel, dia.100mm (4”) 2
2
400
600
400
300
3 13-34101-Cart 40/30 insertion D with 4 drawer frames on telescopic runners for modules 400x300mm (11¾x15¾”). Bow door with key-lock. Foldable extension plate and high adjustable plate for computer or writing.
1
11-64040 Telescopic runners Type B 400x600mm (15¾x235/8”) mounted in open steel cart per set 4
3
5 10-64730-Cart Without supporting rails, but modules can be placed in the top and bottom frames. Supporting rails or telescopic runners can be mounted. Wheels: 4 pcs., swivvel, dia. 75mm (3”) Measurements in mm (inch. see below)
600
400
6 10-64730- Cart 60/40 D Basic frame without supporting rails For modules 400x600mm (15¾x235/8”) Cart: 952x645xH860mm (37½x2558x35”) Wheels: 4 pcs., swivel, dia. 100mm (4”)
70
6
5
7
600
400
400 600
10-64834 – Cart 60/40 D Insertion A 4 sets of VARIO supporting rails (4 per section) For modules 400x600mm (15¾x235/8”) Cart: 952x645xH860mm (37½x255/8x35”) Wheels: 4 pcs., swivel, dia. 100mm (4”) 8 10-64838 – Cart 60/40 D Insertion A 8 sets of VARIO supporting rails (4 per section) For modules 400x600mm (15¾x235/8”) Cart: 952x645xH860mm (37½x255/8x35”) Wheels: 4 pcs., swivel, dia. 100mm (4”)
4
7
8
Accessories for open steel carts
1 11-64606-Fixed
extension stand For 40/60 modular carts. In the stand can be placed modules 400x300mm (11¾x15¾”) 22-34400 Laminate plate optional 2 11-64683-Extension stand,
foldable Writing shelf or modules 30/40 may be inserted. Shown with module 30/40 built as chart storage unit. 11
2
3
4
5 5
6
7
8
3 11-66042 (for 40/60 carts)
11-66041 (for 30/40 carts) Foldable writing shelf
4 11-64610-Waste bag holder Made from bended coated wire. Lid (11-64608). Yellow bags (11-64611)
5 11-30048 -Holder for
disposable gloves Can be mounted on all carts with 20 x 20 square tubing construction. For 240x130x70mm box (9½x51/8x2 ¾”). 6 11-64692-Container
for hazardous waste 11-64690-Holder for container
7 11-64632 E-stand Mounted in modular carts with insertion B = 60/40, which makes it possible to insert 2 x 30/40 modules.
8 22-64418 Gallery top plate Gray plastic on melamine plate. 600 x 400mm (235/8x15¾”)
71
Accessories for open steel carts
1 11-64601 Clamp with
screw for fixation For use with accessories, transfusion (IV) pole or stand for dispenser cassettes. 2 11-64619-Transfusion
(IV) pole With 2 hooks for hanging solutions.
1
2
3 11-66031 Stand with 6 hooks for infusion bottles/bags Fitted in two clamps with handscrew.
4 11-64666 - Stand 11-66008 for D frames) for the hanging of dispenser cassettes Cassettes, 3 partitions, 11-66333 Cassettes, 4 partitions, 11-66334 Cassettes, 5 partitions, 11-66335 Cassettes, 6 partitions, 11-66336 3
4
5
6
7
8
5 11-66336-Dispenser cassettes with 6 partitions. Color white - partitions transparent W 600xH 112xD 74mm (235/8 x43/8 x 3”)
6 11-66335-Dispenser cassettes with 5 partitions. Color white - partitions transparent W 600xH 162xD 108mm (235/8 x63/8 x4¼”)
7 11-66334-Dispenser cassettes with 4 partitions. Color white - partitions transparent W 600xH 207xD 135mm (235/8 x81/8 x53/8 ”)
8 11-64688 Holder in aluminium for sutur boxes
72
Transport carts
Transport carts
“
• Transport carts are supplied with handles for maneuverability. • Open transport carts can be equipped with lockable bars. • Truck coupling devices available. • Aluminium container carts can be equipped with various panels, for straight insertion, or combination of angled and straight insertions. • All aluminum container carts are equipped with lockable doors. • Please be aware of that all shown modules in transport carts are extra.
”
Open transport carts
Transport cart – R-10 Art. no. 14-64881 10 sets of VARIO supporting rails For modules – Insertion A Measurements of Transport cart: 625x700xH 1520mm (253/8x27½x62”) Wheels: dia. 125mm (5”) - 4 swivel 1
Transport cart – R-20 Art. no. 14-64882 2x10 sets of VARIO supporting rails For modules – Insertion AA Measurements of Transport cart: 1060x700xH 1520mm (41¾x27½x60”) Wheels: dia. 125mm (5”) - 4 swivel 1
1
Transport cart – R-30 Art. no. 14-64883 3x10 sets of VARIO supporting rails For modules – Insertion AAA Measurements of Transport cart: 1500x700xH1600mm (59x24½x63”) Wheels: dia. 200mm (8”) 2 swivel and 2 fixed 2
Transport cart combined - L10 - Art. no. 14-64885 10 sets of VARIO supporting rails. For modules – Insertion A 3 fixed melamine shelves 835x645mm - (327/8x253/8”) Measurements of Transport cart: 1500x700xH1600mm (59x24½x63”) Wheels: dia. 200mm (8”) - 2 swivel and 2 fixed 2
2
75
Accessories for open transport carts
14-64786 - Cover in nylon (for R-10 14-64881) 1
14-64787 - Cover in nylon (for R-20 14-64882) 14-64788 - Cover in nylon (for R-30 14-64883) Welcro closing system and fasteners on all four corners
1
14-99001 Transport cart for height adjustable runners 2
(16-71603 right) - (16-71604 left) for fitting in angled position (16-71601 right) - (16-71602 left) for fitting in horizontal position
2
14-64797 - Lockable bar prevents unauthorized removal of trays and modules. Stops can optionally be mounted on the back (14-64800) 3
14-64797L - Bar lock Strong and durable lock that prevents non-authorised persons from accessing the contents of the transport modules 4
3
76
4
Closed transport carts
15-61714 - 1 section ALU-container cart with "horizontal" panels
400 600
1
15-61704 - 1 section ALU-container cart with VARIO panels Dimension: H1575xW555xD794mm (62x217/8x31¼”). Wheels:160mm (6¼”) - (2 swivel with brakes and 2 fixed). A vertical handle bar at each corner. A base and 4 corner bumpers. Optional top bumper. Door opens to 270˚. Optional customized truck-pull. 1
15-61715 - 2 section ALU-container cart with "horizontal" panels
400
400
600
2
15-61705 - 2 section ALU-container cart with VARIO panels Dimension: H1575xW984xD794mm (62x38¾x31¼”). Wheels: 160mm (6¼”) - (2 swivel with brakes and 2 fixed). A vertical handle bar at each corner. A base and 4 corner bumpers. Optional top bumper. Door opening: 270˚. Optional customized truck pull. 2
15-61716 - 3 section ALU-container cart with "horizontal" panels
400
400
400
600
3
15-61706 - 3 section ALU-container cart with VARIO panels Dimension: H1575xW1408xD794mm (62x38¾x31¼”). Wheels:160mm(6¼”) - (2 swivel with brakes and 2 fixed). A vertical handle bar at each corner. A base and 4 corner bumpers. Optional top bumper. Door opening: 270˚. Optional customized truck pull. 3
77
Closed transport carts
Panels for horizontal insertion Produced with vacuum-formed ABS. SMS containers and baskets measuring L600xW400 (235/8x15¾”) or L300xW400mm (11¾x15¾”) can be inserted 1
VARIO panels for angled/straight insertion Produced with injection -moulded ABS. SMS containers and baskets measuring L600xW400 (235/8x15¾”) or L300xW400mm (11¾x15¾”) can be inserted 2
1
2
3
4
5
6
18-69970 Roller Support Wheel for VARIO panels For use with heavy items 3
19-61870 Stop-clips Prevent the modules from falling out of the VARIO panels 4
SMS ALU-container carts are equipped with lockable doors 5
6 160mm (6¼”) wheels (2 swivel with brakes and 2 fixed) and bumper
78
Cabinets
VISION
TOPLINE
VISION
TOPLINE
VISION has angular corners and a horizontal handle in matt chrome. It has a blank space where you can insert a code or a name to identify the contents and location of the unit.
The Topline door is characterised by its rounded edges and a vertical handle in anodised aluminium - with or without back plate. The door is laminated on the front and back side.
The door is fitted with PP plastic edging and coated with laminate on both sides.
The edge is made of anodised aluminium.
Doors can be supplied with glass.
Doors can be supplied with glass.
Hinges are visible from the outside, they are self-closing and have a 270 degrees opening angle. The hinges comply with DIN 4554, 68857 and 68930.
Hinges are visible from the outside and made of anodised aluminium. They are fitted with sliding bushes to minimise abrasion. Hinges have an opening angle of 160 degrees.
Tall and upper cabinets type A
457
*
100
2100
650
Measurements: Height 2100mm (825/8“) - Width 457mm (18”) - Depth 650mm (255/8“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 680mm (26¾”) - Measurement interior of aperture 1740mm (68½”) Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Vision tall cabinet - type A
17-V41000
17-V41088
17-V41012
17-V41011
17-V41022
17-V41021
Topline tall cabinet - type A
17-T41000
17-T41088
17-T41012
17-T41011
17-T41022
17-T41021
Choice of cabinet panels see page 89-96
457
*
100
905
1195
650
Measurements: Height 1195mm (471/16“) - Width 457mm (18”) - Depth 650mm (255/8“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 680mm (26¾”) - Measurement interior of aperture 935mm (36¾”)
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Vision upper cabinet - type A
17-V43000
17-V43088
17-V43012
17-V43011
17-V43022
17-V43021
Topline upper cabinet -type A
17-T43000
17-T43088
17-T43012
17-T43011
17-T43022
17-T43022
Choice of cabinet panels see page 89-96
81
Upper and lower cabinets type A and D
457
581
350
(Roller front 700)
457
*
100
905
650
Measurements upper: Height 581mm (227/8“) - Width 457mm (18”) - Depth 350mm (13¾“) Measurements lower: Height 905mm (355/8“) - Width 457mm (18”) - Depth 650mm (255/8“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 680mm (26¾”) - Measurement interior of aperture 545mm (21½”) Art. no. Vision upper cabinet - type D 17-V44000 Topline upper cabinet - type D 17-T44000 Choice of cabinet panels see page 89-96
Art. no.
Art. no. 17-V44012 17-T44012
Art. no. 17-V44011 17-T44011
Vision lower cabinet - type A 17-V42000 Topline lower cabinet - type A 17-T42000 Choice of cabinet panels see page 89-96
17-V42088 17-T42088
17-V42012 17-T42012
17-V42011 17-T42011
650
Art. no. 17-V44022 17-T44022
Art. no. 17-V44021 17-T44021
457
100
905
200
200
100 100
100
100
100
100
100
100 100
200
100
100
100
100
100 100 100 100
200 200
Measurements: Height 905mm (355/8“) - Width 457mm (18”) - Depth 650mm (255/8“) Drawers heights: 200mm (8“) - 100mm (4“)
Vision cabinet - type A Topline cabinet - type A Both with telescopic frame drawers for the insertion of modules
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
17-V42413/02 17-T42413/02
17-V42414/01 17-T42414/01
17-V42415 17-T42415
17-V42416 17-T42416
17-V42414 17-T42414
Max. height of modules depicted on drawing (mm)
82
Tall and upper cabinets type B
657
*
100
2100
450
Measurements: Height 2100mm (825/8“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 480mm (187/8”) - Measurement interior of aperture 1740mm (68½”)
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Vision tall cabinet - type B
17-V61000
17-V61088
17-V61012
17-V61011
17-V61022
17-V61021
Topline tall cabinet - type B
17-T61000
17-T61088
17-T61012
17-T61011
17-T61022
17-T61021
Choice of cabinet panels see page 89-96
657
*
100
905
1195
450
Measurements: Height 1195mm (471/16“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 480mm (187/8”) - Measurement interior of aperture 935mm (36¾”)
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Vision upper cabinet - type B
17-V63000
17-V63088
17-V63012
17-V63011
17-V63022
17-V63021
Topline upper cabinet - type B
17-T63000
17-T63088
17-T63012
17-T63011
17-T63022
17-T63021
Choice of cabinet panels see page 89-96
83
Upper and lower cabinets type B
657
*
657
Measurements upper: Height 581mm (227/8“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) Measurements lower: Height 905mm (355/8“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) * Roller shutter - Please add 30mm (13/16”) in depth - Total 480mm (187/8”) - Measurement interior of aperture 545mm (21½”) Art. no. Vision upper cabinet - type B 17-V64000 Topline upper cabinet - type B 17-T64000 Choice of cabinet panels see page 89-96
Art. no.
Art. no. 17-V64012 17-T64012
Art. no. 17-V64011 17-T64011
Vision lower cabinet - type B 17-V62000 Topline upper cabinet - type B 17-T62000 Choice of cabinet panels see page 89-96
17-V62088 17-T62088
17-V62012 17-T62012
17-V62011 17-T62011
Art. no. 17-V64022 17-T64022
Art. no. 17-V64021 17-T64021
657
200
200
100 100
100
100
100 100
100
100
100 100
100
100 100
200
100
200
100
100
200
100
Measurements: Height 905mm (355/8“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) Drawers: 200mm (8“) - 100mm (4“)
Vision cabinet - type B Topline cabinet - type B Both with telescopic frame drawers for the insertion of modules
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
17-V62413/02 17-T62413/02
17-V62414/01 17-T62414/01
17-V62415 17-T62415
17-V62416 17-T62416
17-V62414 17-T62414
Max. height of modules depicted on drawing (mm)
84
Pass-through cabinets type A
457
Measurements: Height 2100mm (825/8“) - Width 457mm (18”) - Depth 670mm (263/8“)
Art. no.
Art. no.
Vision tall cabinet - type A
17-V41912
17-V41922
Topline tall cabinet - type A
17-T41912
17-T41922
Pass-through cabinet type A. Top-view
Choice of cabinet panels see page 89-96
457
Measurements upper: Height 1195mm (471/16“) - Width 457mm (18“) - Depth 670mm (263/8“) Measurements lower: Height 905mm 35½“ - Width 457mm (18“) - Depth 670mm (263/8“)
Vision upper cabinet - type A Topline upper cabinet - type A Choice of cabinet panels see page 89-96 Vision lower cabinet - type A Topline lower cabinet - type A Choice of cabinet panels see page 89-96
Art. no. 17-V43912 17-T43912
Pass-through cabinet type A. Top-view
Art. no. 17-V43922 17-T43922
17-V42912 17-T42912
85
Pass-through cabinets type B
657
Measurements: Height 2100mm (825/8“) - Width 657mm (255/8“) - Depth 470mm (18½“)
Art. no.
Art. no.
Vision tall cabinet - type B
17-V61912
17-V61922
Topline tall cabinet - type B
17-T61912
17-T61922
Pass-through cabinet type B. Top-view
Choice of cabinet panels see page 89-96
657
Measurements upper: Height 1195mm (471/16“) - Width 657mm (257/8“) - Depth 470mm (257/8“) Measurements lower: Height 905mm (35½“) - Width 657mm (257/8“) - Depth 470mm (257/8“)
Vision upper cabinet - type B Topline upper cabinet - type B Choice of cabinet panels see page 89-96 Vision lower cabinet - type B Topline lower cabinet - type B Choice of cabinet panels see page 89-96
86
Art. no. 17-V63912 17-T63912 17-V62912 17-T62912
Art. no. 17-V63922 17-T63922
Pass-through cabinet type B. Top-view
Cabinets for medicine, parking and refrigerator type A+B 657
Measurements upper: Height 1195mm (471/16“) - Width 657mm (257/8“) - Depth 450mm (1711/16“) Art. no. 17-V63812 Vision upper cabinet - type B 17-T63812 Topline upper cabinet - type B Fitted with 3 “Wing” shelves, an extendable work-surface, and light fittings. Shelf unit mounted on door - inside
Art. no. 17-V63811 17-T63811
Art. no.
Accessories:
18-80100B-L
Key lock on door left Key lock on door right Vision drug cabinet with key lock Topline drug cabinet with key lock
18-80100B-R 17-V68360 17-T68360
914
657
657
657
Measurements parking cabinet: Height 2100mm (825/8“) - Width 914mm (36“) - Depth 650mm (255/8“) Parking cabinet type AA on U-plinth with 2 doors for open supply carts and adjustable shelves (excl. shelves)
Art. no.
Cabinet for refrigerator type B
Body for refrigerator
Cabinet with door for refrigerator
Art. no. Vision lower cabinet 17-V62800 Topline lower cabinet 17-T62800
Art. no.
Vision upper cabinet
17-V63892(L) 17-V63891(R) 17-T63892(L) 17-T63891(R)
Topline upper cabinet
Vision look Topline look
17-V91017 17-T91017
Vision tall cabinet
Shelf 19mm (3/4”)
17-VT1001
Topline tall cabinet
Cabinet for refrigerator. Door below Art. no.
17-V61812(L) 17-V61811(R) 17-T61812(L) 17-T61811(R)
(L) = left hinged (R) = right hinged
87
Special cabinets
657
657
457
657
Measurements of lockers - type B. Side/front-view Vision lower cabinet type B - H 880mm (34¾“) Topline lower cabinet type B - H 880mm (34 ¾”) Vision upper cabinet type B - H 1220mm (48“) Topline upper cabinet type B - H 1220mm (48”) Lockers equipped with individual locks (extra)
Art. no. 17-V62710 17-T62710 17-V63710 17-T63710
Measurements of wardrobe - type A/B. Side/front-view
Tall cabinet type A - H 2100mm (825/8”) Bar for hanger and shelf for hats (Add same number for Vision or Topline) Tall cabinet type B - H 2100mm (825/8”) Extender for hanger and shelf for hats (Add same number for Vision or Topline)
Type A Type B Perforated rail Telescopic runner per set (Add same numbers for Vision or Topline)
88
Art. no See page 81 18-M41905 18-67310
See page 83 18-80151
657
457
Measurements: Type A (see page 81) Measurements: Type B (see page 83)
Art. no. See page 81 18-80150
Measurements: Type A (see page 81) Measurements: Type B (see page 83) Art. no. See page 83 18-M61905 18-67303
Type A Type B Extendable panel type A - 1 pcs. Extendable panel type B - 1 set (Add same numbers for Vision or Topline)
Art. no. See page 81
Art. no. See page 83
18-M41999 18-M61998
• All panels have built in stop function. • Roller support wheels can be inserted to make the extension of modules (filled with stock) easier. • Telescopic runners. • Perforated rails for telescopic runners. • Modules inserted straight can be pulled out into an angled position. • Accessories.
”
Cabinet panels
“
• Panels with straight insertion or with straight/angled insertion type A or B. (400mm (15¾”) or 600mm (235/8”) wide).
Support panels for cabinets
Injection moulded VarioTilt panel for horizontal insert
Built-in stop-function. Removable relief wheels can be mounted in the front edge of the wall for safe and easy extension of modules storing heavy products. These practical features make the wall ideal for cabinets in various heights. Max. load of 20 kg per insert.
VarioTilt panel allows the modules to be pulled out and tilted for better access
Used in cabinets where access from both sides is necessary (double access). Max. load of 20 kg per insert.
Injection moulded VarioFlex panel for angled and horizontal insert
Built-in stop-function. This patented wall allows angled insert and provides better overview of products stored in the top modules. Removable relief wheels can be mounted in the front edge of the wall for safe and easy extension of modules storing heavy products. These practical features make the wall ideal for cabinets in various heights. The wall can be dismounted for cleaning. Max. load of 20 kg per insert.
Perforated rails in stainless steel for telescopic runners
The perforated rail can be adjusted every 1«. This solution is recommended for storage of heavy items and where 110% extension is needed. Usually mounted in cabinets from working height to the floor. Max. load of 50 kg per insert.
Please observe, that item numbers including an M mean that panels/telescopic runners are mounted in the cabinets from the factory. Please remember to add item numbers from the chapter “Cabinets”. Item numbers including an S mean that the panels/telescopic runners will be delivered separately (without cabinets).
90
Support panels in tall cabinet type A/B
400
400 600
600
1 18-M41902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 23 - Distance apart: 75mm (3”)
1 18-M61902 - Type B VarioFlex, (angled/straight insertion) No. of insertions: 23 - Distance apart: 75mm (3”)
2 18-M41977 - Type A
VarioTilt (straight insertion) No. of insertions: 50 - Distance apart: 37.5mm (1½”) 2 18-M61977 Type B VarioTilt (straight insertion) No. of insertions: 50 - Distance apart: 37.5mm (1½”)
400
400 600
2
600
3 18-M41925 - Type A
VarioFlex (angled/straight) - Perforated rail 1. No. of insertions: 11 - Distance apart: 75mm (3”) 2. Hole distance: 25mm (1”)
1
3 18-M61925 - Type B
1
1
2
2
VarioFlex (angled/straight) - Perforated rail 1. No. of insertions: 11 - Distance apart: 75mm (3”) 2. Hole distance: 25mm (1”) 4 18-M41975 - Type A VarioTilt (straight insertion) - Perforated rail 1. No. of insertions: 27 - Distance apart: 37.5mm (1½”) 2. Hole distance: 25mm (1”) 4 18-M61975 Type B Panel (straight insertion) - Perforated rail 1. No. of insertions: 27 - Distance apart: 37.5mm (1½”) 2. Hole distance: 25mm (1”)
400
400 600
4
600
5 18-M41955 - Type A Perforated rail for telescopic runners Hole distance: 25mm (1”)
3
5 18-M61955 - Type B Perforated rail for telescopic runners Hole distance: 25mm (1”)
6 18-M41979 - Type A VarioTilt (straight insertion) for pass-through cabinet No. of insertions: 50 - Distance apart: 37,5mm (1½”) 6 18-M61979 - Type B VarioTilt (straight insertion) for pass-through cabinet No. of insertions: 50 - Distance apart: 37,5mm (1½”) 5
6
91
Support panels in tall cabinet type A/B (not mounted)
400
400 600
600
1 18-S41902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 23 - Distance apart: 75mm (3”)
1 18-S61902 - Type B VarioFlex, (angled/straight insertion) No. of insertions: 23 - Distance apart: 75mm (3”)
2 18-S41977 - Type A
VarioTilt (straight insertion) No. of insertions: 50 - Distance apart: 37.5mm (1½”) 2 18-S61977 Type B VarioTilt (straight insertion) No. of insertions: 50 - Distance apart: 37.5mm (1½”)
400
400 600
2
600
3 18-S41925 - Type A
VarioFlex (angled/straight) - Perforated rail 1. No. of insertions: 11 - Distance apart: 75mm (3”) 2. Hole distance: 25mm (1”)
1
3 18-S61925 - Type B
1
1
2
2
VarioFlex (angled/straight) - Perforated rail 1. No. of insertions: 11 - Distance apart: 75mm (3”) 2. Hole distance: 25mm (1”) 4 18-S41975 - Type A VarioTilt (straight insertion) - Perforated rail 1. No. of insertions: 27 - Distance apart: 37.5mm (1½”) 2. Hole distance: 25mm (1”) 4 18-S61975 Type B Panel (straight insertion) - Perforated rail 1. No. of insertions: 27 - Distance apart: 37.5mm (1½”) 2. Hole distance: 25mm (1”)
400
400 600
4
600
5 18-S41955 - Type A Perforated rail for telescopic runners Hole distance: 25mm (1”)
3
5 18-S61955 - Type B Perforated rail for telescopic runners Hole distance: 25mm (1”)
6 18-S41979 - Type A VarioTilt (straight insertion) for pass-through cabinet No. of insertions: 50 - Distance apart: 37,5mm (1½”) 6 18-S61979 - Type B VarioTilt (straight insertion) for pass-through cabinet No. of insertions: 50 - Distance apart: 37,5mm (1½”) 5
92
6
Support panels in tall cabinet type A/B
1 18-M41914 - Type A
400
400 600
600
VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”) Fixing of 1 set of telescopic runners
1 18-M61914 -Type B
VarioFlex, (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”) Fixing of 1 set of telescopic runners
2 18-M41978 - Type A
VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) Fixing of 1 set of telescopic runners
2 18-M61978 - Type B
2
400
400
600
3 18-M41904 - Type A
Support panels (straight insertion) No. of insertions: 44 - Distance apart: 40 mm
1
600
VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) Fixing of 1 set of telescopic runners
3 18-M61904 Type B
1
Support panels (straight insertion) No. of insertions: 44 - Distance apart: 40 mm
4 18-M41910 - Type A
Support panels (angled/straight insertion) 1. No. of insertions: 17 - Distance apart: 50 mm 2. No. of insertions: 22 - Distance apart: 40 mm
2
4 18-M61910 -Type B
4
400
400 600
5 18-M41920 - Type A Fixing of telescopic runner, per set
3
600
Support panels (angled/straight insertion) 1. No. of insertions: 17 - Distance apart: 50 mm 2. No. of insertions: 22 - Distance apart: 40 mm
5 18-M61920- Type B Fixing of telescopic runner, per set
6 18-M41997 - Type A Perforated plate on telescopic runners 6 18-M61997 - Type B Perforated plate on telescopic runners
5
6
93
Support panels in tall cabinet type A/B (not mounted)
1 18-S41914 - Type A
400
400 600
600
VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”) Fixing of 1 set of telescopic runners
1 18-S61914 -Type B
VarioFlex, (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”) Fixing of 1 set of telescopic runners
2 18-S41978 - Type A
VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) Fixing of 1 set of telescopic runners
2 18-S61978 - Type B
2
400
400
600
3 18-S41904 - Type A
Support panels (straight insertion) No. of insertions: 44 - Distance apart: 40 mm
1
600
VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) Fixing of 1 set of telescopic runners
3 18-S61904 Type B
1
Support panels (straight insertion) No. of insertions: 44 - Distance apart: 40 mm
4 18-S41910 - Type A
Support panels (angled/straight insertion) 1. No. of insertions: 17 - Distance apart: 50 mm 2. No. of insertions: 22 - Distance apart: 40 mm
2
4 18-S61910 -Type B
4
400
400 600
5 18-S41920 - Type A Fixing of telescopic runner, per set
3
600
Support panels (angled/straight insertion) 1. No. of insertions: 17 - Distance apart: 50 mm 2. No. of insertions: 22 - Distance apart: 40 mm
5 18-S61920- Type B Fixing of telescopic runner, per set
6 18-M41997 - Type A Perforated plate on telescopic runners 6 18-M61997 - Type B Perforated plate on telescopic runners
5
94
6
Support panels in tall & lower cabinet type A/B
400
600 600
400
1 18-M61998 -Type B 2 boards on telescopic runners, for mounting suspension device for scopes
1 18-M61999 - Type B 1 board on telescopic runners, for mounting suspension device for scopes
2 18-M41999 - Type A 1 board on telescopic runners, for mounting suspension device for scopes
400
400 600
2
600
3 18-M42902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 8 - Distance apart: 75 mm
1
3 18-M62902 - Type B VarioFlex (angled/straight insertion) No. of insertions: 8 - Distance apart: 75 mm
4 18-M42977 - Type A VarioTilt (straight insertion) No. of insertions: 20 - Distance apart: 37.5mm (1½”)
4
400
400
600
5 18-M42905 - Type A
Perforated rail for telescopic runners Hole distance: 25mm (1”)
3
600
4 18-M62977 Type B VarioTilt (straight insertion) No. of insertions: 20 - Distance apart: 37.5mm (1½”)
5 18-M62905 - Type B
Perforated rail for telescopic runners Hole distance: 25mm (1”)
6 18-M42920 - Type A
Fixing of 1 set of telescopic runners
6 18-M62920 - Type B
Fixing of 1 set of telescopic runners
5
6
95
Support panels in tall & lower cabinet type A/B (not mounted) 400
600 600
400
1 18-M61998 -Type B 2 boards on telescopic runners, for mounting suspension device for scopes
1 18-M61999 - Type B 1 board on telescopic runners, for mounting suspension device for scopes
2 18-M41999 - Type A 1 board on telescopic runners, for mounting suspension device for scopes
400
400 600
2
600
3 18-S42902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 8 - Distance apart: 75 mm
1
3 18-S62902 - Type B VarioFlex (angled/straight insertion) No. of insertions: 8 - Distance apart: 75 mm
4 18-S42977 - Type A VarioTilt (straight insertion) No. of insertions: 20 - Distance apart: 37.5mm (1½”)
4
400
400
600
5 18-S42905 - Type A
Perforated rail for telescopic runners Hole distance: 25mm (1”)
3
600
4 18-S62977 Type B VarioTilt (straight insertion) No. of insertions: 20 - Distance apart: 37.5mm (1½”)
5 18-S62905 - Type B
Perforated rail for telescopic runners Hole distance: 25mm (1”)
6 18-S42920 - Type A
Fixing of 1 set of telescopic runners
6 18-S62920 - Type B
Fixing of 1 set of telescopic runners
5
96
6
Support panels in upper cabinet type A/B & B/D
1 18-M43902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”)
400 600
600
400
1 18-M63902 - Type B VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”)
2 18-M43977 - Type A VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) 2 18-M63977 - Type B VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”)
400
400 300
2
600
3 18-M43903 - Type A Support panels (angled/straight insertion) No. of insertions: 17 - Distance apart: 50 mm
1
3 18-M63903 -Type B Support panels (angled/straight insertion) No. of insertions: 17 - Distance apart: 50 mm
4 18-M44977 - Type D
VarioTilt (straight insertion) No. of insertions: 15 - Distance apart: 37.5mm (1½”)
3
600
600
400
400
5 18-M64902 - Type B VarioFlex, (angled/straight insertion) No. of insertions: 5 - Distance apart: 75mm (3”)
4
6 18-M64977 - Type B
VarioTilt (straight insertion) No. of insertions: 15 - Distance apart: 37.5mm (1½”)
5
6
97
Support panels in upper cabinet type A/B & B/D (not mounted) 1 18-S43902 - Type A VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”)
400 600
600
400
1 18-S63902 - Type B VarioFlex (angled/straight insertion) No. of insertions: 11 - Distance apart: 75mm (3”)
2 18-S43977 - Type A VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”) 2 18-S63977 - Type B VarioTilt (straight insertion) No. of insertions: 30 - Distance apart: 37.5mm (1½”)
400
400 300
2
600
3 18-S43903 - Type A Support panels (angled/straight insertion) No. of insertions: 17 - Distance apart: 50 mm
1
3 18-S63903 -Type B Support panels (angled/straight insertion) No. of insertions: 17 - Distance apart: 50 mm
4 18-S44977 - Type D
VarioTilt (straight insertion) No. of insertions: 15 - Distance apart: 37.5mm (1½”)
3
600
600
400
400
5 18-S64902 - Type B VarioFlex, (angled/straight insertion) No. of insertions: 5 - Distance apart: 75mm (3”)
4
6 18-S64977 - Type B
VarioTilt (straight insertion) No. of insertions: 15 - Distance apart: 37.5mm (1½”)
5
98
6
Accessories
1 18-67303 Telescopic runners 400mm (15¾”) (per set) for inserting in perforated rail 1 18-67310 Telescopic runners 600mm (235/8”) (per set) for inserting in perforated rail
2 18-67298 Telescopic runners 600mm (235/8”) (per set) for inserting in perforated rail. Used in pass-through cabinet
1
2
3
4
5
6
7
8
3 18-67302 Telescopic runners 400mm (15¾”) (per set) 3 18-67321 Telescopic runners 600mm (235/8”) (per set)
18-64653 Perforated rail (1900) (74 3/4”) 18-64654 Perforated rail (1550) (61 “) 18-64655 Perforated rail (900) (35 3/8”) 18-64656 Perforated rail (650) (25 5/8”) Measurements in mm and inches (per piece) 4
5 18-69970 Roller support wheels inserted in VarioFlex panels
6 18-69958 Abrasion cover standard in VarioFlex panels
7 18-69966 VARIO insert
to be inserted in VarioFlex panels. Gives more storage space. Modules inserted horizontally can be drawned out and tilted for use of storage.
8 18-69966 VARIO insert
The function shown in picture.
99
Accessories
1 19-64835 Plastic cover A4 to hold list of cabinet contents - self adhesive
2 19-64815 Plastic holder A5 to hold list of cabinet contents - mounted with screws 2 19-64816 Plastic holder A4 to hold list of cabinet contents - mounted with screws 1
2
3
4
3 19-64857 Clip holder in aluminum 400mm (15¾”). Mounted on wall or inside cabinet door (type A) 3 19-64858 Clip holder in aluminum 600mm (235/8”). Mounted on wall or inside cabinet door (type B) 4 19-61821 Credit card holder 330mm (13”) - self adhesive 4 19-61822 Credit card holder 500mm (191/2”) - self adhesive
5 Clips hanging on aluminum holder Please refer to our Modules brochure for the various types of clips available
5
100
• Wall mounted worksurfaces. • Mounted with support panels for straight/angled insertion of SMS modules. • Telescopic runners can be fitted into perforated rails. • Smooth easy to clean surfaces. • Endless possibilities.
”
Scancell wall mounted cabinets
“
• Easily reorganized by use of a lift truck.
Scancell mounting measurements
Upper cabinets type D 1962 mm (77¼“) 1797 mm (70¾“) 1315 mm (517/8“) 897 mm (353/8“)
Upper cabinets type A (B)
1962 mm (77¼“) 1797 mm (70¾“) 1092 mm (43“) 897 mm (353/8“)
102
Upper cabinets type D as lower cabinets 1797 mm (70¾“) 987 mm (38¾“) 897 mm (353/8“) 340 mm (133/8“)
Upper cabinets type A (B)
1962 mm (77¼“) 1797 mm (70¾“) 940 mm (37“) 897 mm (353/8“)
Lower cabinets type A (B) 1797 mm (70¾“) 1062 mm (41¾“) 897 mm (353/8“) 340 mm (133/8“)
Tall cabinets type A (B)
1962 mm (77¼“) 1797 mm (70¾“) 897 mm (353/8“) 340 mm (133/8“)
Scancell tall and upper cabinets type A
Inches: Height 63¾“ - Width 18¼“ - Depth 27¾“
Wall mounted tall cabinet type A-M150 – H 1620 mm
Art. no.
Art. no.
44-415100
Art. no.
Art. no.
Art. no.
Art. no.
44-455100D 44-475102
44-475101
44-475104
44-475103
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
44-413100
44-453100D 44-473102
44-473101
44-473104
44-474103
Cabinet panel as shown included
Inches: Height 40¼“ - Width 18¼“ - Depth 27¾“
Wall mounted upper cabinet type A-M090 – H 1022 mm (40 1/4”)
Art. no.
Cabinet panel as shown included
103
Scancell upper and lower cabinets type A
Inches upper: Height 25½“ - Width 18¼“ - Depth 27¾“ Inches lower: Height 28½“ - Width 18¼“ - Depth 27¾“ Wall mounted wall cabinet type A-M050 – H 647 mm Cabinet panel as shown included Wall mounted lower cabinet type A-M060 – H 722 mm Cabinet panel as shown included
Art. no. 44-410100
Art. no. 44-450100D
Art. no. 44-470102
Art. no. 44-470101
Art. no. 44-470104
Art. no. 44-470103
44-411100
44-451100D
44-471102
44-471101
44-471104
44-471103
100 200
100 100 100
200
100
50 100 100 200
50 50 100
50 50 50 50
100
100
100
100
Inches: Height 28½“ - Width 18¼“ - Depth 27¾“ Drawers: 200 mm (8“) - 100 mm (4“) 50 mm (2“)
Art. no. Drawer cabinet 44-421530 type A-M060 – H 722 mm with telescopic runners for extension with frame for insertion of modules (100 % extension) Max. height of modules depicted on drawing (mm)
104
Art. no. 44-421540
Art. no. 44-421500
Art. no. 44-421550
Art. no. 44-421560
Scancell tall and upper cabinets type B
Inches: Height 63¾“ - Width 261/8“ - Depth 19½“
Tall cabinet type B-M150 – H 1620 mm
Art. no.
Art. no.
Art. no.
Art. no.
44-615100
44-655100D
44-665105
44-665106
Art. no.
Art. no.
Art. no.
Art. no.
44-613100
44-653100D
44-663105
44-663106
Cabinet panel as shown included
Inches: Height 40¼“ - Width 261/8“ - Depth 19½“
Upper cabinet type B-M090 – H 1022 mm Cabinet panel as shown included
105
Scancell upper and lower cabinets type B
Inches upper: Height 25½“ - Width 261/8“ - Depth 19½“ Inches lower: Height 28½“ - Width 261/8“ - Depth 19½“ Wall mounted upper cabinet type B-M050 – H 647 mm Cabinet panel as shown included Wall mounted lower cabinet type B-M060 – H 722 mm Cabinet panel as shown included
Art. no. 44-610100
Art. no. 44-650100D
Art. no. 44-660105
Art. no. 44-660106
44-611100
44-651100D
44-661105
44-661106
100 200 200
100 100 100 100
50 100 100 200
100
50 50 50 50
100
100
100
100
50 50
Inches: Height 28½“ - Width 261/8“ - Depth 19½“ Drawers: 200 mm (8“) - 100 mm (4“) 50 mm (2“) Art. no. Drawer cabinet 44-621530 type B-M060 – H 722 mm with telescopic runners for extension with frame for insertion of modules (100 % extension) Max. height of modules depicted on drawing (mm)
106
Art. no. 44-621540
Art. no. 44-621500
Art. no. 44-621550
Art. no. 44-621560
Lift trucks and additional accessories
1 The SCANCELL cabinets can easily be replaced by using the transport cart
2
The SCANCELL cabinet will be placed on the rail by using the pump function on the transport cart (the pedal)
3
1
2
3
4
5
6
7
8
44-600501 Transport cart
For lifting the SCANCELL cabinets onto the rail on the wall 4
44-001001 Rail
For mounting wall hung SCANCELL cabinets. Length: 2000 mm per pcs. Color: dark blue 44-600601 Suspension parts For mounting on the bottom of SCANCELL cabinets to fix the transport cart during replacement 6 44-600602 Suspension parts Mounted on bottom of SCANCELL cabinets to fix the transport cart during replacement 5
44-600030 Suspension parts For worksurfaces 7 44-600010 Worksurfaces type B Front postformed. Raised back. Width: 510mm (20”) 8 44-400030 Suspension parts For worksurfaces 8 44-400010 Worksurfaces type A Front postformed. Raised back. Width: 720mm (28¼”) 7
107
Additional accessories - Stands mounted on rails
1 Exsample how to built in SCANCELL stands into an enviroment.
Scancell stands can be tailored to your specifications.
1
41-50110 Stand Type A For mounting on wall rail Height 700mm - Width 460mm (27½x181/8”) Accessories not included 3 41-50115 Stand Type B For mounting on wall rail Height 700mm - Width 662mm (27½x26”) Accessories not included 2
2
3
4
5
6
7
41-50111 Stand Type AA For mounting on wall rail Height 700mm - Width 920mm (27½x36¼”) Accessories not included
4
41-50116 Stand Type BB For mounting on wall rail Height 700mm - Width 1324mm (27½x521/8”) Accessories not included
5
41-50112 Stand Type AAA For mounting on wall rail Height 700mm - Width 1380mm (27½x543/8”) Accessories not included
6
41-50117 Stand Type BBB For mounting on wall rail Height 700mm - Width 1986mm (27½x781/8”) Accessories not included
7
108
ScanMo Racks
ScanMo Racks
“
• Optimal storage space. • Adjustable rails. • Angled position of top supports gives easy access to items stored in higher places. • Extended shelves for storing large size packs. • Stops in front and rear ensure safe storage and use of modules. • The frames are made of square metal tubing and powder coated in a gray color epoxy.
”
ScanMo Racks - installation diagram
Mounting
Max. 30 supports per section Module configuration: angled/straight stabilizer fitted to every other section Shelf configuration: angled/straight stabilizer fitted to every section
1
2
1
1 2
2
1 2
Type A First section (external measurements) 495 mm (19½”) ±1 (X) Add-on (external measurements) 455 mm (177/8”) ±1 (Y) Type B First section (external measurements) 695 mm (273/8”) ±1 (X) Add-on (external measurements) 655 mm (261/8”) ±1 (Y)
Measurements in mm and inches Distance between holes 62,5 (2½”)
Type A
665 (261/8”)
495 (191/2”)
925 (363/8”)
insert
400
2020 (79 ½”)
600
23 5/8”
15 ¾”
465 (18¼”)
Type B
695 (273/8”)
1340 (52¾”)
insert
400
15 ¾ 23 5/8
2020 (79 ½”)
600
111
ScanMo Racks - for Modular Supports or Extended Shelving Type A Modular Side-frame 600 mm (235/8”)
16-71608
1 Stabilizer set (3 straight & 1 angled/straight) 16-7161 1 16-71613 2 Stabilizer set (4 straight) Angled support (right) Angled support (left) Horizontal support (right) Horizontal support (left)
16-71603 16-71604 16-71601 16-71602
Type B Modular Side-frame 400mm (17¾”)
16-71408
1 Stabilizer set (3 straight & 1 angled/straight) 2 Stabilizer set (4 straight)
16-7141 1 16-71413
Angled support (right) Angled support (left) Horizontal support (right) Horizontal support (left)
16-71403 16-71404 16-7140 1 16-71402
Type A Shelving Side-frame 600mm (235/8”)
16-71608
Stabilizer set (4 straight & 1 angled)
16-7161 7
Shelf 850x660mm(33½ x 235/8”)
16-71620
Horizontal support (right) Horizontal support (left)
16-71601 16-71602
Type B Shelving Side-frame 400mm (17¾”) Stabilizer set (4 straight & 1 angled)
16-71408
16-71417
Shelf 1265 x445mm(49¾ x 17½”)
16-71420
Horizontal support (right) Horizontal support (left)
16-71401 16-71402
112
Modules
Trays and boxes
“
• Injection molded ABS trays and inserts. • Stackable.
• Pre-perforated on edge for mounting safety stops. • Beaded edge on trays for label holders. • Inserts and partitions for compartmentilizing. • Machine washable for short periods of time at maximum of 90˚C (194°F). • High-Density storage for large and small items. • Modular Inserts for storage and transportation of small items.
”
Tray lids and trays
300 + 300 15¾
400
20-34201 Tray / Lid 300 x 400 x 15mm 11¾ x 15¾ x 5/8” 1
11¾ + 11¾
ABS
1 300 + 300 400
15¾ 11¾ + 11¾
20-34204 Tray / Lid 300 x 400 x 70mm 11¾ x 15¾ x 2¾” 2
ABS
2 300 + 300 400
15¾ 11¾ + 11¾
3 20-34304 Tray / Lid 300 x 400 x 70mm 11¾ x 15¾ x 2¾”
PC
3 300 + 300 400
15¾ 11¾ + 11¾
4 20-34205 Tray 300 x 400 x 50mm 11¾ x 15¾ x 2”
ABS
4
400
15¾
300 + 300
11¾ + 11¾
ABS
5 20-34206 Tray for use with partitions 300 x 400 x 50mm 11¾ x 15¾ x 2” Partitions 300mm (11¾”) max. 15 pcs.
(20-64269)
Partitions 400mm (11¾”) max. 11 pcs. (20-64270)
5
115
Trays, boxes and partitions
300 + 300 400
15¾ 11¾ + 11¾
1 20-34207 Tray for use with partitions 300 x 400 x 50mm 11¾” x 15¾” x 2” Partitions 300mm (11¾”) max. 15 pcs. (20-64269)
PMMA
Partitions 400mm (15¾”) max. 11 pcs. (20-64270)
1 300 + 300 400
15¾ 11 ¾+ 11 ¾
2 20-64269 Partition 300 x 50mm 11¾ x 2” 2 20-64270 Partition 400 x 50mm 15¾ x 2”
PMMA
2 300 + 300 400
15¾
3 20-64266 T-piece for partition
11¾ + 11¾
PA
3 300 + 300 400
15¾ 11¾ + 11¾
4 20-34210 Tray 300 x 400 x 100mm 11¾ x 15¾ x 10”
ABS
4 300 + 300 400
15¾ 11¾ + 11¾
20-34220 Box 300 x 400 x 200mm 11¾ x 15¾ x 20” 5
ABS
5
116
Tray lids, trays and boxes
600 400
15¾ 235/8
20-64201 Lid tray 600 x 400 x 15mm 235/8 x 15¾ x 5/8” 1
ABS
1 600 400
15¾ 235/8
20-64205 Tray 600 x 400 x 50mm 235/8 x 15¾ x 2” 2
ABS
2 600 400
15¾ 235/8
20-64210 Tray 600 x 400 x 100mm 235/8 x 15¾ x 4” 3
ABS
3 600 400
15¾ 235/8
20-64220 Box 600 x 400 x 200mm 235/8 x 15¾ x 8” 4
ABS
4 600 400
15¾ 23 5/8
20-64228 Box 600 x 400 x 280mm 235/8 x 15¾ x 11” 5
ABS
5
117
Trays and partitions
600 400
15¾ 235/8
ABS
1 20-64206 Trays for use with partitions 600 x 400 x 50mm 235/8 x 15¾ x 2” Partitions 400mm (15¾”) max. 25 pcs. (20-64270)
Partitions 600mm (235/8”) max. 15 pcs. (20-64271)
1 600 400
15¾ 235/8
PMMA
20-64207 Tray for use with partitions 600 x 400 x 50mm 23 5/8 x 15¾ x 2” Partitions 400mm (15¾”) max. 25 pcs. 2
(20-64270)
Partitions 600mm (235/8”) max. 15 pcs. (20-64271)
2 600 400
15¾ 235/8
300 + 300 400
15¾ 11 ¾+11 ¾
20-64272 Partitions 200 x 50mm (77/8 x 2”) 3 20-64270 Partitions 400 x 50mm (15¾ x 2”) 3 20-64271 Partitions 600 x 50mm (235/8 x 2”) 3 20-64266 T-pieces for partitions 20-34206 20-34207 4 Trays for partitions 300 x 400mm (11¾ x 15¾”) See page 111 and 112 3
3
PMMA/ ABS
4 600 400
15¾ 235/8
ABS
5
INSERTS
Inserts can be used as an alternative to partitions or independently without trays.
5
118
Trays and partitions
600 400
15¾ 235/8
ABS
1 20-64211 Tray for use with partitions 600 x 400 x 100mm (235/8 x 15¾ x 4”) Partitions 400mm (15¾”) max. 17 pcs. Partitions 600mm (235/8”) max. 11 pcs.
1 600 400
15¾ 235/8
PMMA
2 20-64212 Tray for use with partitions 600 x 400 x 100mm (235/8 x 15¾ x 4”) Partitions 400mm (15¾”) max. 17 pcs. Partitions 600mm (235/8”) max. 11 pcs.
2 600 400
15¾ 235/8
3 23-64353 Partition 400 x 100mm (15¾ x 4”) 3 23-64354 Partition 600 x 100mm (235/8 x 4”)
PMMA
3 300 + 300 400
15¾ 11 ¾ +11 ¾
4 All partitions have a “snap” feature between the ribs, for defined division of the modules.
ABS
4 300 + 300 400
15¾ 11 ¾ +11 ¾
5 20-64266 The T-piece secures the smaller ”snapped off” sections of the partitions.
PA
5
119
Baskets
“
• Injection molded ABS baskets. • Stackable.
• Pre-perforated for safety stops. • Beaded edges on baskets for label holders. • Partitions for compartmentalization. • Washable at max. 90˚C(194°F) for short periods of time. • Strong and durable construction.
”
Baskets and partitions
300 + 300 400
15¾ 11 ¾ +11 ¾
1 23-34251 Basket 300 x 400 x 100mm (11¾ x 15¾ x 4”) Partitions 300mm (11¾”) max. 11 pcs. (23-64257)
Partitions 400mm (15¾”) max. 7 pcs.
ABS
(23-64253)
1 300 + 300 400
15¾ 11 ¾ +11 ¾
2 23-34252 Basket 300 x 400 x 200mm (11¾ x 15¾ x 77/8”) Partitions 400mm (15¾”) max. 7 pcs. (23-64255)
ABS
2 600 400
15¾ 235/8
3 23-64251 Basket 600 x 400 x 100mm (235/8 x 15¾ x 4“) Partitions 400mm (15¾”) max. 17 pcs. (23-64253)
Partitions 600mm (235/8 “) max. 11 pcs.
ABS
(23-64254)
3 600 400
15¾ 235/8
4 23-64252 Basket 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) Partitions 400mm (15¾”) max. 17 pcs. (23-64255)
Partitions 600mm (235/8”) max. 11 pcs.
ABS
(23-64256)
4 300 + 300 400
15¾ 11 ¾+11 ¾
PA
5 The labeling system has been designed to ensure accurate product identification. The product labels can be placed on all of the modules, anywhere in the supply chain process. 5
121
Partitions for baskets
600 400
15¾ 235/8
1 23-64253 Partitions 400 x 100mm (15¾ x 4”) 1 23-64254 Partitions 600 x 100mm ( 235/8 x 4”)
ABS
1
15¾
400
600
235/8
2 23-64255 Partitions 400 x 200mm (15¾ x 8”) 2 23-64256 Partitions 600 x 200mm (235/8 x 8”)
ABS
2
15¾
400
300 + 300
3 20-64266 T-piece for partitions
11 ¾+ 11 ¾
PA
3 300 + 300 400
15¾
4 23-64259 Partition lock
11¾ + 11¾
ABS
4
400
15¾
300 + 300
11 ¾+ 11 ¾
ABS
122
23-34260 Basket Liner 300 x 400mm (11¾ x 15¾”) 5 23-64260 Basket Liner for basket 600x400x100mm 600 x 400mm (235/8 x 15¾”) 5 23-64261 Basket Liner for basket 600x400x200mm 600 x 400mm (235/8 x 15¾”) 5
5
• Stackable.
• Inserts for compartmentalization. • Washable at max. 90°C (194°F)for short periods of time. • High density storage for large and small items. • Inserts are ideal for storage and transport of small items.
”
Modular inserts
“
• Injection molded ABS trays and inserts.
Modular inserts and partitions
Individual modular inserts arranged in a tray 1
1 300 + 300 400
11 ¾+ 11 ¾
21-62206 Inserts 170x75x50mm (6¾x3x2”)
21-62205 Partition 70mm (2¾”) for 21-62206
2
300 + 300 400
15¾
2
6 14
11 ¾+ 11 ¾
PA
ABS
2
400
11 ¾+ 11 ¾
RIL
28-62752 550mm (215/8”) blue 3 28-62754 650mm (235/8”) blue
28-62751 550mm (215/8”) gray 3 28-62753 650mm (235/8”) gray 3
300 + 300
3
Suspension rails for inserts 21-62206
400
15¾
300 + 300
11¾ + 11¾
EP
Suspension rails for insert 21-62206 3
35/77
15¾
15/28
11 ¾+ 11 ¾
ABS
300 + 300
21-62204 Inserts 100x50x45mm (4x2x1¾”) 4 21-62202 Inserts 50x50x45mm (2x2x1¾”) 4
6
21-62210 Inserts 11¾ + 11¾ 120x110x50mm (4¾x4¾x2”) 4
12
400
400
300 + 300
ABS
4
12
15¾
6
300 + 300
11 ¾+ 11 ¾
3
21-62212 Inserts 11 ¾+ 11 ¾ 240x110x50mm (9½x4¾x2”)
21-62220 Inserts 240x55x50mm (9½x21/8 x2”)
5
5
ABS
ABS
5
124
6
400
400
300 + 300
Modular inserts and partitions
1
Lids for inserts 21-62212 21-62218 1
240x120mm (9½x4¾”)
1 21-62216 Lid for insert, gray 240x120mm (9½x4¾”)
ABS
21-62215
Transparent insert lid
1
21-62215F
Transparent insert lid
1
240x120mm (9½x4¾”) Cut out 150x40mm (57/8x15/8”)
11 ¾+ 11 ¾
2 21-62218 Inserts
240x55x100mm (9½x21/8x37/8”)
240x110x100mm (9½x43/8 x37/8”)
15¾
12
21-62222 Inserts 2
400
6
300 + 300 15¾
400
300 + 300
PC
3 6
11¾ + 11¾
ABS
ABS
2 3
300 + 300 15¾
9
21-62224 Inserts
21-62228 Inserts 3
11¾ + 11¾
400
4
15¾
400
300 + 300
2 4
11¾ + 11¾
340x110x50mm (133/8x4¾x2”)
340x55x50mm (133/8 x21/8x2”)
ABS
ABS
3
4 21-62226 Inserts
15¾
9
300 + 300
21-62230 Inserts 4
400
4
15¾
400
300 + 300
2 4
11¾ + 11¾
11¾ + 11¾
340x55x100mm (133/8 x21/8x37/8”)
ABS
340x110x100mm (133/8 x4¾x37/8”)
ABS
4 300 + 300 400
15¾ 11¾ + 11¾
5 21-62207 Partition W110mm H 50mm (H 2” W 4¾”)
PA
5
125
Modular inserts (autoclavable)
0 3
15¾
400
300 + 300
11¾ + 11¾
1 21-62242 Inserts 550x110x50mm (215/8x4¾x2”)
1 21-62244 Inserts 850x110x50mm (33½x4¾x2”)
ABS
ABS
1 300 + 300 400
6
15¾
0
11 ¾+ 11 ¾
2 21-62240 Inserts 550x55x70mm (215/8x21/8 x2 ¾”)
ABS
2 3 18-67372 Catheter holder with hook for accessary rail 550x110x50mm (215/8 x4¾x2”) 10x25mm (3/8”x1”) 3 41-30040 for Scancell
3 18-67373 Catheter holder with hook for accessory rail 850x110x50mm (33½x4¾x2”) 10x25mm (3/8”x1”) 3
41-30042 for Scancell
ABS
ABS
3 300 + 300 400
15¾
21-62209 Inserts 120x110x50mm (4¾x4¾x2 “) 4 21-62214 Inserts 240x110x50mm (9½x4¾x2“)
PC
4
)
°F
le 57 ab (2 v C cla 5° to . 12 u A ax M
4
300 + 300 400
4
15¾
2
11¾ + 11¾
PPO
21-62324 Inserts 340x110x50mm (133/8x4¾x2 “) 5
126
F)
° le 75 ab (2 v C cla 5° to . 13 u A ax M
6
21-62225 11¾ + 11¾ Inserts 340x110x50mm (133/8x4¾x2 “) PC
4
11¾ + 11¾
3
5
4 21-62227 Inserts 340x110x100mm 133/8x4¾x4 “
400
12
15¾
6
300 + 300
• Medicine dispensers. • Transport boxes. • Different label systems. • UNI-boxes.
”
• Modular inserts with compartments.
Medicine distribution
“
• Module for storage and transportation of medicine.
Inserts for medicine
300 + 300 400
15¾ 11¾ + 11¾
ABS
300 + 300 400
15¾ 11¾ + 11¾
ABS
1 28-62760 UNI-box with handle 340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 1 28-62762 Partitions, crosswise 80mm (31/8”) 1 28-62758 UNI-box with handle 340 x120 x 70mm (133/8 x 4¾ x 2¾”) 1 28-62759 Partitions, crosswise120mm (2¾”)
1
2 28-62760L Uni-box with lid 340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 2 28-62758L Uni-box with lid 340 x 120 x 70mm (133/8 x 4¾ x 2¾”)
2 600 400
15¾ 235/8
RIL/EP
3 28-62763 Rail for suspension of UNI-boxes 600mm (235/8”) long, gray 3 28-62763B 600mm (235/8”) long, blue
3 600 400
15¾ 235/8
ABS
4 28-62724 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) 6 pcs. UNI-box 340 x 80 x 70mm (133/8 x 31/8 x 2¾) Credit-card size label slots
4 300 + 300 400
15¾ 11¾ + 11¾
ABS
Stands are available in different versions. Can be inserted either in ´A´ 400mm (15¾”) or ´B´ 600mm (235/8”) position. The stand shown at the right (prod. no. 41-80033) is in a “B” (235/8”) (600mm) insertion. 18 cassettes are inserted in the stand 5
5
128
Inserts for medicine
300 + 300 400
15¾ 11¾ + 11¾
ABS/PS
600 400
15¾ 235/8
ABS/PS
1 28-62704 Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”) with slots for cards + transparent insert with 8 compartments. Each compartment has 4 recessed holes for medicine cups 1 28-62700 Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”) with slots for cards + transparent insert with 15 compartments
1
2 28-62734 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) with inserts for cards + transparent insert with 20 compartments. Each compartment has 4 recessed holes for medicine cups
2 600 400
15¾ 23 5/8
3 28-62730 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) with slots for cards + transparent insert with 35 compartments
ABS/PS
3 600 400
15¾ 235/8
4 28-62720 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) with sections for 4 modular inserts: 340 x 120 x 50mm (133/8 x 4¾ x 2” )
(21-62224) ABS
340 x 120 x 100mm (133/8 x 4¾ x 4”) (21-62226)
Slot for Insertion of credit-card size labels 4 600 400
15¾ 235/8
ABS
5 28-62722 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) with sections for modular inserts: 170 x 75 x 50mm (6¾ x 3 x 2”)
(21-62206)
(2 X 7 pcs. = 14 inserts per tray) 5
129
Inserts for medicine etc.
300 + 300 400
15¾ 11¾ + 11¾
1 28-62739 Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”) with inserts for 12 medicine dispensers
ABS
1
15¾
400
600
235/8
2 28-62737 Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”) with insert for 2 x 12 = 24 medicine dispensers
ABS
2
15¾
400
300 + 300
11¾ + 11¾
3 28-62741E Medicine dispensers, 4 compartments with transparent sliding lid
PS
3 300 + 300 400
6
15¾
3
11¾ + 11¾
PC
300 + 300 400
15¾ 11¾ + 11¾
ABS/ PC/ PPO
130
4 21-64102 Test Tube Holder for 50 pcs. 13mm (1/2”) holes 4 21-64104 Test Tube Holder for 32 pcs. 18mm (3/4” ) holes 4 21-64106 Test Tube Holder for 18 pcs. 25mm (1”) holes 5 21-62215F Lid, transparent -PC 240 x 120mm (9½ x 14¾”) Opening 150 x 40mm (57/8 x 15/8”) 5 21-62213 Inserts, yellow -ABS 240 x 120 x 50mm (9½ x 14¾ x 2”) 5 20-34303 Lid tray, yellow -PPO 300 x 400 x 15mm (11¾ x 15¾ x 5/8”) 2 Openings 155 x 45mm (61/8 x 1¾”) 5 20-34311 Tray, yellow -PPO 300 x 400 x 100mm (11¾ x 15¾ x 37/8”)
4
5
Modular tray and box accessories
300 + 300 400
15¾ 11¾ + 11¾
ABS
1 28-62710 Injection tray 400 x 300mm (15¾ x 11¾”) divided up with space for syringes, swabs, hypodermic needles, vials and prepared syringes
1 300 + 300 400
15¾ 11¾ + 11¾
SS
2 19-64806 Stainless steel plate with a hole for locking the box and lid together 2 19-64808 Lock with space for label Can also be secured with clips
19-64680 - 19-64675 - 19-64676
Labels can be put on the plate or text can be printed directly on the steel plate 300 + 300 400
15¾ 11¾ + 11¾
ABS
600 400
15¾ 235/8
Boxes with lids for medicine transportation 3 A) Box (20-34210) 300 x 400 x 100mm (11¾ x 15¾ x 4”) and lid (20-34201) 300 x 400 x 15mm (11¾ x 15¾ x 5/8”) 3 B) Box (20-34220) 300 x 400 x 200mm (11¾ x 15¾ x 77/8”) and lid (20-34204) 300 x 400 x 70mm (11¾ x 15¾ x 2¾”) Assorted labeling options available 3
2
4
A
B 3
C) Box (20-64220) 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) and lid (20-64201) 600 x 400 x 15mm (235/8 x 15¾ x 5/8”) 4
ABS
C 300 + 300 15¾
400
4
5 Trays baskets and lids can be silk-screened with custom printing.
11¾ + 11¾
ABS/ PC
5
131
Labeling and accessories
“
• Injection molded label holders in Polyamid. • Stainless steel label holders. • Labels for bar codes. • Handles for trays and baskets. • Alu-clip-holders. • Attachments for A4 hanging files. • Frame for catheter holders.
”
• Module boxes for storing catheters.
Accessories for modules
400
15¾ 235/8
19-61881 Handle 400mm (15¾”) blue (incl. locks) 1 19-61891 Handle 600mm (235/8”) blue (incl. locks) 1
600
19-61880 Handle 400mm (15¾”) gray (incl. locks) 1 19-61890 Handle 600mm (235/8”) gray (incl. locks) 1
PA
Handles can be mounted on all plastic containers and baskets from Scan Modul System with pre-perforated holes on the edge
PA
1
2 19-61870 Safety Stops for baskets 2 parts, blue Are used to prevent modules from falling when they are fully extended out of cabinets, racks or carts. To be used with Scan Modul side-panels and runners. 2
3 SMS label system Labels are available with all types of clips, and for printing bar codes by laserprinters and thermoprinters.
33
20-64290 Wall rails 600mm (235/8 ”) for suspending 100mm (4”) deep modules at an angle, blue, Ral 5013 4
EP
4 20-64292 Wall rails 600mm (235/8”)for suspending 100mm (4”) deep modules horizontally, blue, Ral 5013
44
19-64680 Security clips for boxes and lids 5 19-64675 Sealing arrow, red 5 19-64676 Sealing arrow, blue 5
PA
5
133
Accessories for identification
PA
1 19-61800 Label holders without cover, Blue, 1 19-61700 White For labels maximum size of 57 x 38mm (2¼ x 1½”) 1
PA
2 19-61818 Large label holder without cover Blue 2 19-61705 White For labels maximum size of, 38 x 57mm (1½ x 2¼”) 2
19-61805 Large label holder without cover Can be placed in straight or angled position. Blue For labels maximum size of, 38 x 57mm (1½ x 2¼”) 3
PA
3 4 19-61804 Transparent cover for label holders
PA/PC
4 19-61802 Transparent cover for large label holders For labels maximum size of, 57 x 38mm (1½ x 2¼”) 4
19-61810 Credit card size label holders blue Maximum size 85 x 54mm (33/8 x 2 1/8) 5 19-61811 - Plastic card, red 19-61812 - Plastic card, blue 19-61813 - Plastic card, green 19-61814 - Plastic card, white 19-61817 - Plastic card, yellow 19-61816 - Cover, clear 5
PA
134
5
Accessories for identification
1 19-64830 Holder for A-5 sheets. Made in stainless steel. Can withstand washing and the autoclave 1 19-64543 Stainless steel plate for labels or “Dymo”/”P-Touch” tape
SS
1
2 19-64879 Label holder vertical large, white For label max. 100 x 70mm (37/8 x 2¾”) PA
2 300 + 300 400
15¾ 11¾ + 11¾
PA
3 19-64805 DP Label holder, horizontal, white For label max. 25 x 75mm (1 x 3”) 3 19-64805 D Label holder, horizontal, white For label max. 20 x 70mm (¾ x 2¾”)
3
ALU
4 19-64857 Alu-clip-holder for labels 350mm (13¾”) for type A cabinets 4 19-64858 Alu-clip-holder for labels 550mm (215/8”) for type B cabinets 4
ALU
5 19-64855 Alu-profile is available in any length 5 19-64851 End stop for clip-holder 5 19-64852 Center support recommended for clips-holder when length is more than 1000mm (39½”) 5
135
1 41-80002 A4 Suspension files 41-80002/01 White 41-80002/02 Yellow 41-80002/03 Green 41-80002/04 Blue 41-80002/05 Red
153/4
400
Accessories modular trays and -boxes
1 300 + 300 400
153/4 11¾ + 11¾
ABS
600
2
18-67331 Frame with 4 rails for suspending catheter holders 400 x 600mm (15¾ x 235/8”) 3
153/4
400
41-80006 Tray 300 x 400 x 200mm (11¾ x 15¾ x 77/8”) with attachment for A 4 suspension files. Can be inserted in type A + D 41-80004 Tray 600 x 400 x 200mm (235/8 x15¾ x 77/8”) with attachment for A 4 suspension files. Can be inserted in type A 2
235/8
ABS/ALU
600 400
153/4 23 /
5 8
4 18-67330 Frame with 6 rails for suspending catheter holders 600 x 400mm (235/8 x 15¾”)
3
ABS/ALU
600 400
153/4 235/8
ABS/PC
5 Catheter box holders in panels For VarioFlex, VarioTilt and ScanCell 18-67710 - Height 485mm (19”) 18-67712 - Height 635mm (25”) 18-67714 - Height 785mm (31”) For angled/straight ABS 18-67720 - Height 500mm (191/2”) 18-67722 - Height 650mm (25½”) 18-67724 - Height 800mm (311/2”) For straight ABS 18-67730 - Height 510mm (20”) 18-67732 - Height 630mm (25”) 18-67734 - Height 790mm (31”)
4
The measurements are total heights *Partitions shown in picture are optional accessories.
136
5
Accessories modular trays, boxes and baskets
400
600
400
600
1 Handles type A can be used on modules to be inserted in either SCANCELL carts, open steel carts, transport carts or cabinets
Handles type B can be used on modules to be inserted in either SCANCELL carts, open steel carts, transport carts or cabinets 2
2
1
600
400
400
Handle with STOP 400mm (15¾”)
600
3
19-61880 gray 19-61881 dark blue 19-61882 yellow 19-61883 red 19-61884 green 19-61885 light blue
Handle with STOP 600mm (235/8”)
19-61890 gray 19-61891 dark blue 19-61892 yellow 19-61893 red 19-61894 green 19-61895 light blue
Partitions for SMS modules 20-64206 and 20-64211
600
600
400
5
4
3
400
4
20-64270 Partition 400x50mm (15¾x2”) 20-64271 Partition 600x50mm (235/8 x2”) 20-64253 Partition 400x100mm (15¾x4”) 20-64254 Partition 600x100mm (235/8 x4”) 20-64266 T-piece for partition 6
Containers, trays, baskets, inserts and accessories
Please see modular section
5
6
137
Wire baskets
“
• Rilsan-coated wire baskets. • Stackable.
”
• Partitions for compartmentilization.
Wire baskets with partitions
All mesh sizes are taken from the bottom of the wire baskets
300 + 300 400
15¾ 11¾ + 11¾
1 23-34504 Wire basket 300 x 400 x 50mm (11¾ x 15¾ x 2”) with opening on the front edge. Mesh size approx. 36 x 39mm(13/8 x 1½”)
1 23-34514 Wire basket 300 x 400 x 100mm (11¾ x15¾ x 4”)
RIL
with opening on the front edge. Mesh size approx. 36 x 39mm(13/8 x 1½”)
15¾
400
300 + 300
11¾ + 11¾
2 23-64557 Partition 300 x 100mm (11¾ x 4”) 2 23-64551 Partition 400 x 100mm (15¾ x 4”)
300 + 300 15¾
400
2 23-34510 Wire basket 300 x 400 x 100mm (11¾ x 15¾ x 4”)
The basket has double frame wire and stackable corners. Mesh size approx. 23 x 23mm (7/8 x 7/8”)
RIL
11¾ + 11¾
2
3 23-34520 Wire basket 300 x 400 x 200mm (11¾ x 15¾ x 77/8”)
The basket has double frame wire and stackable corners. Mesh size approx. 23 x 23mm (7/8 x 7/8”)
23-64558 Partition 300 x 200mm (11¾ x 77/8”) 3 23-64552 Partition 400 x 200mm (15¾ x 77/8”) 3
RIL
300 + 300 15¾
400
1
11¾ + 11¾
3
23-64510 Wire basket 600 x 400 x 100mm (235/8 x 15¾ x 4”) 4
The basket has double frame wire and stackable corners. Mesh size approx. 23 x 23mm (1 x 1”) 4 23-64551
RIL
Partition 400 x 100mm (15¾ x 4”) 4 23-64555 Partition 600 x 100mm (235/8 x 4”) 4
300 + 300 400
15¾ 11¾ + 11¾
RIL
23-64520 Wire basket 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) 5
The basket has double frame wire and stackable corners. Mesh size approx. 23 x 23mm 1 x 1”) 5 23-64552 Partition 400 x 200mm (15¾ x 77/8”) 5 23-64556 Partition 600 x 200mm (235/8 x 77/8”)
5
139
Autoclave baskets I and II
“
• Stainless steel baskets. • Stackable.
• Partitions for compartmentalization. • Autoclavable.
”
Autoclave baskets, type I
Type I is a traditional basket, which can be stacked on top of another, taking up the same space filled, as well as empty 300 + 300 1 24-34540 15¾
400
11¾ + 11¾
Wire basket 300 x 400 x 100mm (11¾ x 15¾ x 4”) Stackable Mesh size approx. 45 x 47mm (1¾ x 17/8”)
SS
24-34541 Wire basket 300 x 400 x 200mm (11¾ x 15¾ x 77/8”) 1
Stackable Mesh size appox. 45 x 47mm (1¾ x 17/8”)
1
300 + 300 400
15¾ 11¾ + 11¾
24-64540 Wire basket 600 x 400 x 100mm (235/8 x 15¾ x 4”) 2
Stackable Mesh size approx. 45 x 47mm (1¾ x 17/8”)
24-64551 Partition 400 x 100mm (15¾ x 4”) 2 24-64555 Partition 600 x 100mm (235/8 x 4”) 2
SS
2
300 + 300 400
15¾ 11¾ + 11¾
24-64542 Wire basket 600 x 400 x 150mm (235/8 x 15¾ x 57/8”) 3
Stackable Mesh size approx. 45 x 47mm (1¾ x 1 7/8”) 3 24-64553 Partition 400 x 150mm (15¾ x 57/8”)
SS
3 300 + 300 400
15¾ 11¾ + 11¾
24-64541 Wire basket 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) 4
Stackable Mesh size approx. 45 x 47mm (1¾” x 17/8”)
24-64552 Partition 400 x 200mm (15¾ x 77/8”) 4 24-64556 Partition 600 x 200mm (235/8 x 77/8”) 4
SS
4
300 + 300 400
15¾ 11¾ + 11¾
SS
24-64530 Wire basket 600 x 400 x 300mm (235/8 x 15¾ x 11¾”) 5
Stackable Mesh size approx. 45 x 47mm (1¾” x 17/8”) 5 24-64557 Partition 400 x 300mm (15¾ x 11¾”)
5
141
Autoclave baskets, type lI
600 400
15¾ 235/8
1 Type II. When the baskets are filled they can be stacked on top of each other. When empty, by turning the baskets180 degrees, they can then nest inside each other, taking up less space.
SS
1 600 400
15¾ 235/8
2 24-64581 Wire basket 600 x 400 x 100mm (235/8 x 15¾ x 4”) Stackable
Mesh size approx. 46 x 48mm (1¾ 2 24-64586
SS
x 17/8”)
Partition 400 x 100mm (15¾ x 4”) 2 600 400
15¾
3 24-64585 Wire basket
600 x 400 x 150mm (235/8 x 15¾ x 57/8”)
235/8
Stackable
Mesh size approx. 46 x 48mm (1¾
x 17/8”)
SS
3
24-64587 Partition 400 x 150mm (15¾ x 57/8”) 3 600 400
15¾ 235/8
4 24-64582 Wire basket 600x400x 200mm (235/8 x15 ¾ x 77/8”) Stackable
Mesh size approx. 46 x 48mm(1¾ x17/8”) SS
4
24-64588 Partition 400x200mm (15¾ x 77/8“) 4 600
400
15¾ 235/8
SS
5 24-64583 Wire basket
600 x 400 x 300mm (235/8 x 15¾ x 11¾”) Mesh size approx. 46 x 48mm (1¾ x 17/8”) 5
24-64589 Partition 400 x 300mm 15¾ x 11¾ “ 5
142
• Vacuum formed PVC trays resistant to liquid disinfectants. • Trays for the collection of instruments. • Containers with drain plugs. • Containers for insertion of stainless steel baskets.
”
Instrument trays
“
• Injection molded PPO trays resistant to liquid disinfectants.
Instrument trays
Produced in stainless plate according to the AISI standard with 5mm diameter holes, in a triangular pattern with 7.5mm between the centres 1 25-64645 Tray 250 x 160 x 70mm (97/8 x 6¼ x 2¾”)
SS
1 2 25-64646 Tray 250 x 320 x 70mm (97/8 x 125/8 x 2¾”)
SS
25-64647 Tray 450 x 320 x 70mm (17¾ x 125/8 x 2¾”) 3
2
SS
3
SS
4 25-64651 Tray with handle 250 x 160 x 70mm (17¾ x 125/8 x 2¾”) 4 25-64652 Tray with handle 250 x 320 x 70mm (97/8 x 125/8 x 2¾”) 4 25-64653 Tray with handle 450 x 320 x 70mm (17¾ x 125/8 x 2¾”)
4
25-62661 Handle for trays (each) 5
SS
For trays (25-64645 - 25-64646 - 25-64247)
5
144
Disinfection containers
1 31-64202 Lid 600 x 400 x 15mm (235/8 x 15¾ x 5/8 “) 1 31-64221 Box 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) 1 31-64222 Box 600 x 400 x 200mm (235/8 x 15¾ x 77/8”)
600 400
15¾ 235/8
PVC
with drain plug
1 600 400
15¾ 235/8
2 24-64545 Stainless steel basket 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) for insertion in box (31-65221) for the collection of soiled instruments
SS
2 650 450
17 3/4
3 31-65221 Box 650 x 450 x 220mm (255/8 x 17¾ x 85/8”) 3 31-65202 Lid 650 x 450 x 10mm (255/8 x 17¾ x 3/8”)
255/8
PVC
3 650 450
17 3/4 255/8
PVC
4 31-65222 Box 650 x 450 x 220mm (255/8 x 17¾ x 85/8”) with drain plug 4 31-65202 Lid 650 x 450 x 10mm (255/8 x 17¾ x 3/8”)
4
31-65223 Drain plug for PVC-box 31-65221 containing liquid disinfectant 5
SS
5
145
Instrument Trays and boxes and disinfectant 300 + 300 400
15¾ 11 ¾ +11 ¾
SS/ PVC
300 + 300 15¾
400
31-34219 Perforated stainless steel, instrument tray 300 x 400 x 170mm (11¾ x 15¾ x 6¾”) 1
11 ¾ +11 ¾
1 31-34220 Partition for stainless steel instrument tray 1 31-34221 PVC Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”) with 2 openings 1 31-34211 PVC Tray 300 x 400 x 100mm (11¾ x 15¾ x 37/8”) 1 31-34218 PVC Tray 300 x 400 x 170mm (11¾ x 15¾ x 6¾”) 1 31-34202 PVC Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”)
1
2 20-34302 Lid/Tray 300 x 400 x 15mm (11¾ x 15¾ x 5/8”) For tray/box (20-34311 and 20-34321)
PPO
2 300 + 300 400
15¾ 11 ¾ +11 ¾
PPO
3 20-34311 Tray 300 x 400 x 100mm (11¾ x 15¾ x 37/8”) for liquid disinfectants, collection of instruments and utensils
3 300 + 300 400
15¾ 11 ¾+11 ¾
PPO
4 20-34321 Box 300 x 400 x 200mm (11¾ x 15¾ x 77/8”) for liquid disinfectants collection of instruments and utensils
4 300 + 300 400
15¾ 11 ¾+11 ¾
PPO
5 20-34303 Lid/Tray 300 x 400 x10mm (11¾ x 15¾ x 3/8”)
For tray/box (20-34311 and 20-34321)
5
146
Trays and boxes for instrument collection and disinfection
400
15¾
300 + 300
11¾ + 11¾
PPO/ PC
1 20-34303 Lid tray 300 x 400 x 10mm (11¾ x 15¾ x 3/8”) with 2 openings 1 21-62215 Sliding lid 240 x 120mm (9½ x 4¾”) - PC Controls noxious oders and fumes. Can be used together with tray 20-34311and box 20-34321 1
400
15¾
600
11¾ + 11¾
20-64302 Lid tray 600 x 400 x 15mm (235/8 x 15¾ x 5/8”) For boxes (20-64322 and 20-64328) 2
PPO
2 600 15¾
400
20-64311 Tray 600 x 400 x 100mm (235/8 x 15¾ x 4”) Designed for transport of soiled instruments in liquid disinfectant 3
11¾ + 11¾
PPO
3
400
15¾
600
11¾ + 11¾
PPO
4 20-64322 Box 600 x 400 x 200mm (235/8 x 15¾ x 77/8”) Designed for transport of soiled instruments in liquid disinfectant
4
400
15¾
600
11¾ + 11¾
PPO
20-64328 Box 600 x 400 x 280mm (235/8 x 15¾ x 11”) Designed for transport of soiled instruments in liquid disinfectant 5
5
147
Shelves
“
• Stainless steel or Rilsan coated wire shelves. • Shelves with raised edges. • Wire shelves for container transportation/storage. • Shelves in melamine or high-pressure laminate.
”
Shelves
300 + 300 400
15¾ 11 ¾ + 11 ¾
1
22-34400
Shelf-Laminate 300 x 400 x 6mm (11¾ x 15¾ x 6”)
LAM
1 600 400
15¾ 235/8
2 22-64400 Shelf-Laminate 600 x 400 x 6mm (235/8 x 15¾ x 1/4”)
LAM
2 300 + 300 400
15¾ 11 ¾ + 11 ¾
22-34403 Shelf-Melamine 300 x 400 x 12mm (11¾ x 15¾ x ½”) 3
MEL
3 600 400
15¾ 235/8
4 22-64403 Shelf- Melamine 600 x 400 x 12mm (235/8 x 15¾ x ½”)
MEL
4 300 + 300 400
15¾ 11¾ + 11¾
SS
22-34401 Shelf with beaded edge 300 x 400 x 15mm (11¾ x 15¾ x 5/8”) 5 22-64401 Shelf with beaded edge 600 x 400 x 15mm (235/8 x 15¾ x 5/8”) 5
5
149
Wire shelves
300 + 300 400
1 22-34501 Wire shelf 300 x 400mm (11¾ x 15¾”) Mesh size approx. 22,5 x 22,5mm (7/8 x 7/8”)
11¾ + 11¾
RIL
1 600 400
15¾ 235/8
RIL
2 22-64501 Wire shelf 600 x 400mm (235/8 x 15¾”) Mesh size approx. 22,5 x 22,5mm (7/8 x 7/8”)
2 300 + 300 400
15¾ 11¾ + 11¾
SS
3 22-34502 Wire shelf 300 x 400mm (11¾ x 15¾”) Mesh size approx. 22,5 x 23,0mm (7/8 x 7/8”)
3 600 400
15¾ 235/8
SS
4 22-64502 Wire shelf 600 x 400mm (235/8 x 15¾”) Mesh size approx. 22,5 x 23,0mm (7/8 x 7/8”)
4 600 400
15¾ 235/8
SS
150
22-64504 Wire shelf 600 x 400mm (235/8 x 15¾”) for container in DIN size 600 x 300mm (235/8 x 11¾”) Mesh size approx. 22,5 x 23,0mm (7/8 x 7/8”) 5
5
Material description
ABS
Material Properties: Rigid, durable and impact resistant. A smooth surface finish structurally stable. Temperature: Max. continuous + 70C (158F) Max. short-term. + 90C (194F)
Acrylnitrile-Butadiene-Styrene
Chemical tolerance: Withstands some weak acid, bases, oil and fats. Avoid solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
EP
Material Properties: Used as powder coating on steel,good mechanical strength, hard, and durable. Temperature: Max. continuous + 100C (212F) Max. short-term. + 120C (248F)
Epoxy
Chemical tolerance: Resistant against bases, limited resistance against strong acid. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
LAM
Material Properties: Sturdy and durable surface, withstands normal impact influences. Temperature: Max. continuous + 150C (302F) Max. short-term. + 180C (356F)
Laminate
Chemical tolerance: Limited resistance against weak acid and bases. Cleaning: Wipe clean with damp cloth.
MEL
Material Properties: Durbale, withstands light impact. Temperature: Max. Not over +40C (104F)
Melamine
Chemical tolerance: Limited resistance against weak acid and bases. Cleaning: Do not wash in automatic washing plants, wiping off with the most common detergents and disinfectants on the market.
PA
Material Properties: High impact resistance, durable withstands constant bending. Temperature: Max. continuous + 105C (221F) Max. short-term. + 150C (302F)
Polyamid
Chemical tolerance: Resistant against fuels, lubricants and some solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
PC
Material Properties: Stiff,duragle. Highly impact resistant. Virtually unbreakable. Autoclaveable Temperature: Max. continuous + 125C (257F) Max. short-term. + 140C (284F)
Polycarbonate
Chemical tolerance: Resistant against oils and fats. Poor towards strong acids and bases. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
Material Properties: Rigid and durable Clarily with 90% light transmission UV-stable. Temperature: Max. continuous + 70C (158F) Max. short-term. + 90C (194F)
PMMA
Polymethylmethacrylate
Chemical tolerance: Withstands weak acid and bases and non polar solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market. Material Properties: Abrasion resistant. Durable and hard. Structurally stable. Temperature: Max. continuous + 110C (230F) Max. short-term. + 120C (248F)
PPO
Polyphenylenoxide
Chemical tolerance: Withstands weak acid and bases avoid solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market. Material Properties: Rigid, durable and impact resistant. Temperature: Max. continuous + 60C (140F) Max. short-term. + 65C (150F)
PS
Polystyrene
Chemical tolerance: Resistant against water, acids and bases. No strong oxidized acids. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market. Material Properties: Rigid and durable. When stablize becomes highly impact resistant. Smooth surface finish. Temperature: Max. continuous + 60C (140F) Max. short-term. + 75C (167F)
PVC
Polyvinylchloride
Chemical tolerance: Resistant against acids and bases. Limited use with some solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market. Material Properties: As surface coating on steel very hard, durable and impact resistance. UV resistance. Temperature: Max. continuous + 80C (176F) Max. short-term. +100C (212F)
RIL
Rilsan
Chemical tolerance: Insoluble in water and most organic solvents. Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
SS
Material Properties according to the norms below: Steel round and flat oval: DIN 2394 Steel profiled: SIN SEL 065-67 Stainless profile steel tube: DIN 4301 Acid resistant profile stainless steel: DIN 4401
Steel
Cleaning: In automatic washing machines* and with most common detergents and disinfectants on the market.
“Material properties” are obtained from our suppliers. This must be considered as a guide and no responibility can be accepted by Scan Modul System for any errors and omissions. You can obtain further technical information by approaching Scan Modul System directly or one of our representatives. *Avoid high temperatures and longer delays in washing machines than the suggested figures above.
151
Scan Modul Companies BELGIUM Scan Modul MEDI-MATH BV
DENMARK Scan Modul System A/S
FRANCE Scan Modul Medi-Math SARL
GERMANY Scan Modul Orgasystem GMBH
Golflaan 22 9830 Sint-Martens-Latem Belgium Tel: + 32 9/ 220.65.45 Fax: + 32 9/ 388.35.45 E-mail:
[email protected]
Rønnevangs Allé 8 3400 Hillerød Denmark Tel: + 45 48 22 88 77 Fax: + 45 48 22 88 07 E-mail:
[email protected]
2-3 Rue de Madrid Parc GVIO 38 070 Saint Quentin Fallavier France Tel: + 33 474 990 330 Fax: + 33 474 990 333 E-mail:
[email protected]
D-78523 Tutlingen Föhrenstrasse 25 Deutschland Tel: + 49 (74 61) 96 74-0 Fax: + 49 (74 61) 96 74-5 00 E-mail:
[email protected]
NETHERLANDS Scan Modul Medi-Math B.V.
PORTUGAL Scan Modul Medi-Math Lda.
SPAIN Scan Modul Medi-Math SA
SWITZERLAND Scan Modul System AG
Peppelkade 15 3992 Al Houten Nederland Tel: + 31 306 34 53 45 Fax: + 31 306 34 53 00 E-mail:
[email protected]
Rua Rodrigues Sampaio, 32-2, 1150-280 Lisboa Portugal Tel: + 351 21 916 76 58 Fax: + 351 21 916 76 59 E-mail:
[email protected]
Carpinteros, 6 - officina 22 Pol. Pinares Llanos 28670 Villaviciosa De Odon Spain Tel: + 34 916 04 40 40 Fax: + 34 916 04 40 11 E-mail:
[email protected]
Belchenstrasse 2A CH - 4054 Basel Schwitzerland Tel: + 41 (0) 61 301 63 01 Fax: + 41 (0) 61 301 63 07 E-mail:
[email protected]
UNITED KINGDOM Scan Modul System Ltd
U.S.A. Innerspace
Unit 1B, Crown Road Festival Trade Park - Etruria Valley Stoke-on-Trent ST1 5NP United Kingdom Tel: +44 (0) 870 770 8777 Fax: + 44 (0) 870 770 8778 E-mail:
[email protected]
P.O. Box 2186 Grand Rapids, MI 49501-2186 USA Tel: + 1 616 224 2828 Fax: + 1 616 224 2829 E-mail:
[email protected]
Dealers world wide AUSTRIA Scan Modul Orgasystem GMBH
CANADA Logi D
CHILE Danimpo Ltda
TEL +61 (0) 2 9797 0883 E-mail:
[email protected]
TEL +49 74 61 9674 0 E-mail:
[email protected]
TEL +1 450 628 8800 E-mail:
[email protected]
TEL +56 2223 4304 E-mail:
[email protected]
GREECE Alkyoni S.A
HONG KONG Viking Group (H.K.) Ltd.
ICELAND Eirberg ehf.
IRELAND Coffey Healthcare Ltd.
TEL +30 210 69 84 775 - 6 E-mail:
[email protected]
TEL +852 23 95 63 39 E-mail:
[email protected]
TEL +354 569 3100 E-mail:
[email protected]
TEL +353 1 836 1333 E-mail:
[email protected]
ITALY Sanitaria Scaligera Srl division of Biosp TEL +39 0458 378 555 E-mail:
[email protected]
ITALY (Tirol) Scan Modul Orgasystem GMBH
JAPAN Central Uni Co. Ltd.
Latvia SIA Scanmed
TEL +49 74 61 9674 0 E-mail:
[email protected]
TEL +81 93 963 8334 E-mail:
[email protected]
TEL +371 7231485 E-mail:
[email protected]
NORWAY Byrum-Labflex
POLAND Scan Modul Orgasystem GMBH
SWEDEN T Normann AB
TEL +47 22 63 01 68 E-mail:
[email protected]
TEL +49 74 61 9674 0 E-mail:
[email protected]
TEL +6 042 391 200 E-mail:
[email protected]
ALVO Grupa Gastrometal TEL +48 698 001 05 35 E-mail:
[email protected]
152
05-61024.UK Version 7
AUSTRALIA Healthspace Pty Ltd
Work Surfaces
“
• Different gallery style tops. • Available in stainless steel. • Tops can be removed, and exchanged between the same size carts. • Variety of accessories available.
”
Top plates for ScanCell carts
600
400
400
41-14001 - Type A Top plate
600
1
Top plate 0,8mm (.03”) Laminate, gray 2
41-16001 - Type B Top plate
Top plate 0.8mm (.03”) Laminate, gray 1
400
600
400
41-14005 - Type A Top plate
600
3
2
Top plate 0.8mm (.03”) Stainless steel 4
41-16005 - Type B Top plate
Top plate 0.8mm (.03”) Stainless steel 4
3
600
400
400
41-14010 - Type A Top plate
600
5
Top plate with folded edge Stainless steel 6
41-16010 - Type B Top plate
Top plate with folded edge Stainless steel 6
5
600
400
400
41-14012 - Type A Top plate
600
7
Top plate with raised and folded edge - Stainless steel 8
41-16012 - Type B Top plate
Top plate with raised and folded edge - Stainless steel 7
8
51
Work surfaces and tops for ScanCell carts
600
400
400
41-14014 - Type A top plate
600
1
Top plate with folded edge Transparent plastics 41-16014 - Type B Top plate
Top plate with folded edge Transparent plastics
41-14016 - Type A Top plate
2
400 600
3
1
600
400
2
Top plate with folded edge Gray plastics 4
41-16016 - Type B Top plate
Top plate with folded edge Gray plastics
4
3
600
400
400
41-14022 - Type A Gallery top
600
5
Gallery top with raised edge on 3 sides- Gray plastics 6
41-16022 - Type B Gallery top
Gallery top with raised edge on 3 sides - Gray plastics 6
5
8
600
41-16089 - Type B Top for EDP or chart cart
7
52
600
400
400
41-14024 - Type A Gallery top Gallery top with raised edge on 4 sides - Gray plastics 7
8
Tops etc. for ScanCell carts
600
600
400
41-16030 - Type B Gallery top
400
1
Gallery top for 50mm (2”) partitions without lid 41-16034 - Type B Gallery top
Gallery top for 100mm (4”) partitions without lid 41-16030 - Type B Gallery top Shown with optional accessories partitions and a tray
1
3
4
2
600
600
400
400
2
41-16040 - Type B Lid
Transparent lid 4
3
600
600
400
41-16032 - Type B Gallery top
400
5
Gallery top for 50mm (2”) partitions mounted with transparent lid 6
41-16036 - Type B Gallery top
Gallery top for 100mm (4”) partitions mounted with transparent lid 41-16044 - Type B Sealing plate
6
600
400
7
5
Sealing plate for lid on 41-16032 and 41-16036 8
41-16046 Lock
Lock with key for lid on 41-16032 and 41-16036 7
8
53
Tops etc. for ScanCell carts
400
400
400
400
600
41-18010 - Type AA Top plate
600
1
Top plate with folded edge Stainless steel 2
41-18012 - Type AA Top plate
Top plate with folded edge and bulb - Stainless steel 2
1
400
400
400
400
600
41-18022 - Type AA Gallery top
600
3
Gallery top with raised edge on 3 sides - Gray plastics 4
41-18024 - Type AA Gallery top
Gallery top with raised edge on 4 sides - Gray plastics 4
3
400
400
400
400
600
41-18050 - Type AA Top for changing table
600
5
Top for changing table without blue mattress - Top, gray plastics Mattress - 41-16051 41-18016 Top for type AA Top plate with folded edge and bulb - Gray plastics 6
54
6
5
600
600
400
41-12012 Top for type BB Top plate with raised and folded edge. Stainless steel. (Picture) 41-12024 Top for type BB Gallery top with raised and folded edge. Gray plastics. (Picture) 41-12010 Top for type BB Top plate with folded edge. Stainless steel. 41-12016 Top for type BB Top plate with folded edge. Gray plastics. 41-12022 Top for type BB Gallery top with raised edge on 3 sides. Gray plastics. 7
7
• Stands for e.g. stala cassettes, hooks for infusion bottles, trays etc. • Hooks for hanging up cardiac arrest plates. • Infusion stands. • Holders for waste buckets. • Rilsan-coated holders. • Writing plates. • Telescopic runners with hooks. Labels can be placed for identification. • Module boxes for catheters. • Frames for UNI-boxes. • Shevles for holding scopes.
”
Accessories
“
• The utility rail is the key to holding a lot of accessories without using any tools.
Utilitys rails for ScanCell carts
600
400
400
41-20102 Utility rail
600
1
Utility rail in aluminium 1 side 650mm -complete set Can be mounted both right+left 41-20101 Utility rail
Utility rail in aluminium 1 side 450mm - complete set Can be mounted both right+left 41-20115 Utility rail
2
400 600
3
1
600
400
2
Utility rail in aluminium 2 sides complete set left (Right 41-20116) 41-20105 Utility rail
Utility rail in aluminium 2 sides complete left (Right 41-20106) 41-20118 Utility rail
600
400 600
5
4
3
400
4
Utility rail in aluminium 3 sides complete 6
41-20108 Utility rail
Utility rail in aluminium 3 sides complete 6
5
41-40003 Utility rail
8
41-40002 Utility rail
Push rail in aluminium 1 side 480mm(187/8”) - complete set Can be mounted right or left side 56
400
Push rail in aluminium 1 side 690mm (271/8) - complete set Can be mounted right or left side
600
400 600
7
7
8
Accessories for utility rails on ScanCell carts 41-30075 Holder for A4 suspension files 2 41-30076 Holder for cassette for A4 suspension files 2 41-30078 Cassette in plastic for A4 suspension files D162xW329xH255 (63/8 x 13 x 10”) 1
1
2
3
4
5
6
7
8
41-30080 Holder for X-ray envelopes D121xW611xH352mm (4¾x24x137/8”) 3
41-30120 Extension stand Rilsan-treated, gray, for 30/40 module 4
41-30140 Extension stand - right on top for 30/40 module Can be mounted both right /left 5
41-30142 Extension stand on top with mounted plate Can be mounted both right/left 6
41-30144 Extension stand on profile for 30/40 module 7
41-30146 Extension stand on profile with mounted plate 8
57
Accessories for Utility rails on ScanCell carts
1 41-40011/01 Holder for waste bucket
10-15 L, (2.6-3.9 gal.)
holder gray 1 41-40012/01 Waste bucket white plastic,10-15L (2.6-3.9 gal.)
41-30040 Catheterbox 550mm (215/8”) with hook for utility rail 2 41-30042 Catheterbox 850mm (331/2”) with hook for utility rail 2
1
2
41-30048 Holder for 1 box of disposable-gloves with box measurements 240x130x70mm (9½x51/8x 2 ¾”) 4 41-30048/01 Holder for 3 boxes of disposable gloves with box measurements 240x130x70mm (9½x51/8x 2 ¾”) 3
3
4
5
6
7
8
41-30054 Holder for oxygen bottle with Velcro (size D) 105mm (41/8”) 5
41-30062 Holder for electric outlet strip and cord 6
6
41-30062/00 6 - outlet strip (grounded)
41-30067 Holder for extension cord Gray 7
41-30068 Holder for accessories, height 180 - width 435 - depth 160mm (H 71/8”x171/8x6¼”) 8
58
Accessories for ScanCell carts
41-30026G Modular insert 240x10x50mm (9½x43/8 x2”) 1
yellow, with transparent lid 1 41-30024 Holder for modular insert 240x110mm (9½x43/8 “) for utility rail 1 41-30030 Holder for modular insert 340x110mm (133/8 x43/8 “) for utility rail 2 41-30036 Holder for modular insert 550x110mm (215/8”) for utility rail
1
2
3
4
5
6
7
8
41-40012 Waste bucket 12 L (3.1 gal), white in plastic 3
3 41-40011 Holder for waste bucket, gray 3 41-40010 Holder and waste bucket 12 L Complete set 4 41-40018 Lid for bags dispenser 4 41-40014 Dispenser for roll of waste bags, without lid 5 41-31001 DAMECA rail On top (UNIFLEX) type B 490mm (9¼”) (41-31002 type A 515mm (20¼”) (UNIFLEX rails can be mounted both L/R)
41-20210 Writing plate Writing plate 340 x 500mm (133/8 x 195/8”) 6
41-20200 Hook Plastic hook for hanging writing plate 6
41-20220 Hooks 2 pcs. for hanging the cardiac arrest plate 7
41-20222 Cardiac arrest plate Cardiac arrest plate 600 x 400mm (235/8 x 15¾”) 8
59
Accessories for utility rails on ScanCell carts
41-30010 Bracket for infusion stand Holder can be used together with functional rail, extension stand and writing plate 1
41-30011 Iinfusion stand with 2 hooks - stainless steel 2
1
2
3
4
55
66
7
8
41-30018/01 Holder for mounting dispensers (Soapdispenser not included) 3
41-30020 Holder and clinical waste container for utility rail - complete 4
5 41-30050 Holder for modular inserts 170 x 70mm (67/8x2¾”) gray 6 41-30052 Holder for modular inserts 240 x 110mm (10x4¾”) gray Stands not included
41-30150 Single hook 100mm (37/8”) for utility rail 41-30152 Double hook 100mm (37/8”) for utility rail 41-30154 Stand with 4 single hooks 400mm (153/4”), for utility rail 41-30156 Stand with 6 single hooks 600mm (235/8”), for utility rail 7
8
41-30164 Stand with 12 hooks
400mm (15¾”)for anesthesia tubing
41-30166 Stand with 15 hooks 400mm (15¾”) for anesthesia tubing
60
Accessories for utility rails on ScanCell carts
1 41-50040 Stand type A with 3 rails and bracket 1 41-50042 Stand type A with 3 rails - without bracket
41-50041 Stand type A with 3 rails and bracket for side 2
2 41-50043 Stand type A with 3 rails - without bracket
1
2
3
4
5
6
7
8
3 41-50060 Stand type B with 3 rails with holder for cassettes 4 41-50073 Cassette
white plastic with transparent lids/3 sections 600Wx237Hx160D (255/8 x9½ x6¼”) 4
41-50074 Cassette
white plastic with transparent lids/4 sections 600Wx207Hx135D (255/8 x81/8x53/8”) 5
41-50075 Cassette
white plastic with transparent lids/5sections 600Wx162Hx108D (255/8 x 6 3/8 x 4 ¼) 5
41-50076 Cassette
white plastic with transparent lids/6 sections 600Wx112Hx74D (255/8 x 43/8 x 27/8”)
41-50080 Shelf tray with guide rails for compartments, gray plastics 6
7 41-50090 Stand type B with suture holders in aluminium
8 41-50098 Stand type B with 6 stainless steel hooks for solutions without bracket 8 41-50099 Rail type B with 6 stainless steel hooks for solutions
61
Accessories for ScanCell carts
1 -A
- 41-80041 Stand type A with 1 shelf for UNI-boxes
400 600
400
600
1 -B
- 41-80042 Stand type A with 2 shelves for UNI-boxes 1 -C
- 41-80110 Extension plate type A with stop. Aluminium square in front. Width 400mm (15¾”) 1 -D
- 41-80043 Stand type A with 3 shelves for UNI-boxes
A
A
B
B
C
C
D
D
2 -A - 41-80031 Stand type B with 1 shelf for UNI-boxes 2 -B
- 41-80032 Stand type B with 2 shelves for UNI-boxes 2 -C
- 41-80112 Extension plate type B with stop. Aluminium square in front. Width 600mm (235/8”) 2 -D - 41-80033 Stand type B with 3 shelves for UNI-boxes
1
Note: all UNI-boxes shown on picture 1 and 2 are extra
2
400
600
41-80005 Shackle 300 mm (11¾”) for A4 suspension files in module trays 3
4 41-80003 Shackle 600mm (235/8”) for A4 suspension files in module trays 3 2
41-80102 E-stand with stop Rilsan treated. For 2 x 30/40 modules (11/8x15/8”) 5
4
400
600
6 41-80130 Separation for shelf type B Height 80mm (31/8”) 5 2
62
6
Accessories for ScanCell carts
18-67583 Adjustable catheter-holder - Type A Catheter solution with one telescopic runner fitted onto a melamineplate, 20 hooks included. Label holders can be placed over each hook. 2 18-67581 Adjustable catheter-holder - Type B Catheter solution with two telescopic runners fitted onto a melamineplate, 28 hooks included. Label holders can be placed over each hook. 3 18-67593 Hooks on telescopic rail For hanging up catheters. 2 rows - insertion A. Label holders can be placed over each hook. 4 18-67591 Hooks on telescopic rail For hanging up catheters. 4 rows - insertion B. Label holders can be placed over each hook. 1
400
600
1
2
600
600
400
400
4
3
600
400
400 600
5 6 Catheter box holder Partitions for boxes are extra. Aluminium distance bars. Insertion A+B for VARIO panels.
600
400
(For use in ScanCell carts)
18-67710 485mm (19”) 18-67712 635mm (25”) 18-67714 785mm (31”) Total height of units
6
5
400 600
400
600
18-67660 Shelf for hanging and storing scopes - Type A Cutout sections for 6 scopes 8 18-67661 Shelf for hanging and storing scopes - Type B Cutout sections for 6 scopes 7
7
8
63
Accessories for ScanCell carts
1 41-70022D Lock mounted on rolling front down 1 41-70030U Lock mounted on rolling front up
41-70030 Lock for drawer 2 41-70032 Lock mounted on drawer 2
41-70004 Lock mounted on single door 3 41-70008 Lock mounted on double door 4 41-70101 Bow door Mounted on cart M060 41-70102 mounted on cart M075 41-70104 mounted on cart M090 41-70110 sealing for bowdoor mounted on cart 41-70114 Lock with key for bow door mounted on cart
1
2
3
41-70046 Central-locking system for M060 (with lock) 41-70047 identical for M075 41-70048 identical for M090 41-70049 central locking system per drawer 6 41-70040 Safety catch system for drawer for M060 41-70042 identical for M075 41-70044 identical for M090 41-70045 safety catch per drawer 41-70045L lock for safety catch system
3
4
5
6
7
8
5
41-70331 Digital lock mounted on doors 41-70332 mounted on drawer 41-70335 mounted on roller front 7
41-70361 Digital lock mounted on doors 41-70362 mounted on drawer 41-70365 mounted on roller front 8
64
Accessories for ScanCell carts
600
400 600
41-66010 Gray plast bumper - Type B
400
1
41-66011 Gray plast bumper - Type B mounted on cart 1
41-66015 Gray plast bumper - Type B for filing cart 2
41-66016 Gray plast bumper - Type B mounted on cart 2
3
2
600
400 600
400
41-64010 Gray plast bumper - Type A 3 41-64011 Gray plast bumper - Type A mounted on cart
1
41-68010 Gray plast bumper - Type AA 4 41-68011 Gray plast bumper - Type AA mounted on cart 4
5
4
400
600
600
400
41-60006 Bumper corners 4 pcs. 5 41-60008 Bumper corners 4 pcs. mounted on cart
3
41-80303 with Rolling front Cart made anti-magnetic to use in rooms with MCR scanner 41-80302 with VARIO-Drawer 41-80301 with Open front 6
6
5
41-80020 - Type B X-ray cassette with 9 compartments (41-80012) 8 partitions with cut-outs
600
400 600
400
41-80021 - Type A X-ray cassette with 6 compartments (41-80017) 5 partitions with cut-outs 7
8
7
8
65
Accessories for ScanCell carts
1 1 Additional item numbers for carts with roller shutters to take out: Single carts 41-97120M Double carts 41-97122M Triple carts 41-97124M
With the bracket plate mounted, the roller shutter can be taken out for cleaning. For type B can the rolling front be placed for up or down rolling. For type A only to be closed down. 1
For cleaning the cart, the VARIO panels can be taken out.. 2
3
In addition the rolling front can be ordered to take out.
2
3
Item numbers for carts with VARIO panels to take out:
66
40-451200D A-M060 rolling front
40-851200D AA-M060 rolling front
40-611200 B-M060 open front
40-252200D BB-M060 rolling front
40-455200D A-M150 rolling front
40-855200D AA-M150 rolling front
40-655200D B-M150 rolling front
40-255200D BB-M150 rolling front
40-475201 A-M150 doors
40-865200 AA-M150 doors
40-665200 B-M150 doors
40-265200 BB-M150 doors