GP1S53VJ000F

GP1S53VJ000F

Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter

■ Description

■Agency approvals/Compliance

GP1S53VJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design.

1. Compliant with RoHS directive

■Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit

■ Features 1. Transmissive with phototransistor output 2. Highlights : • Vertical Slit for alternate motion detection 3. Key Parameters : • Gap Width : 5mm • Slit Width (detector side) : 0.5mm • Package : 13.7×10×5.2mm 4. RoHS directive compliant

Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

1

Sheet No.: D3-A02601FEN Date Oct. 3. 2005 © SHARP Corporation

GP1S53VJ000F

■ Internal Connection Diagram Top view 3

1 Anode

2

2 Cathode 4

3 Collector

1

4 Emitter

■ Outline Dimensions

(Unit : mm) Top view 13.7+0.3 −0.3

5.2

5+0.2 −0.1

Model. No. S53

SHARP mark "S" A-Aʼ section

10MIN.

10

7.5

3.5

Date code (Both side)

0.45+0.3 −0.1

A B

Aʼ Bʼ

0.5 1.5

0.5

C1

(2.5) (Detctor center)

B-B ʼ section

0.4+0.3 −0.1

(10.3)

(2.54)

4

1

3

2

• Unspecified tolerance shall be as follows ;

Dimensions (d) d≤6 6