commercial products catalog
Commercial Products Catalog
Marking 75 years Of Dedication To Plumbing And Mechanical Contractors Look around Conbraco and you’ll see our commitment to serving mechanical contractors is as strong today as it was 75 years ago when we filled our first order. As the industry has grown, so has our lineup. Today, we’re designing and producing more than 120 distinct products under the Conbraco and Apollo® brand
Product Number Index
names.
Section Series/Part No.
From our nearly 1.5 million square feet of ISO 9001 certified space, we’re turning out world-class safety and shut-off valves, relief valves, strainers, pressure reducers and accessories, plus the most comprehensive line of U.S. made ball valves. It’s a product selection so complete, our customers can enjoy single-source convenience and accountability on products that meet or exceed stringent ASME, UL, CSA, AWWA, ASSE and IAPMO quality and performance standards. Fast deliveries from stocked regional inventories are coordinated by our network of more than 2,000 distributors. We’re investing in the future, too. During the past ten years, Conbraco has invested more than $100 million in advanced manufacturing and distribution facilities to meet our customers needs with unmatched efficiency, consistency and speed. All products, services and systems will be constantly improved to enhance our recognition for leadership and excellence by our customers and our industry. This requires that we clearly determine our customers’ requirements and consistently meet or exceed those requirements.
2
Contents | Back
. . . . . . . . . .Page
BALL VALVES SECTION 3-Way, 4-Seated Ball Valve with Flanged Pump Connections . . . . . . . . . . . . . . . . . . . . . . . .27 32-100-01 Reduced Port Threaded Bronze Ball Valve . . . . . . . .5 32-200-01 Reduced Port Solder End Bronze Valve . . . . . . . . . .5 64 Series Full-Port Brass Ball Valves . . . . . . . . . . . . . . . . . .29 70-100-01 Standard Port Threaded Ball Valve . . . . . . . . . . . . .6 70-100-03/04 Standard Ball Valve with Stem Extension . . . . . . . .6 70-100-07 Threaded Valve with Tee Handle . . . . . . . . . . . . . . .7 70-100-08 Threaded Ball Valve with 90° Reversed Stem . . . . . . .7 70-100-16/58 Chain Lever Ball Valves . . . . . . . . . . . . . . . . . . . . . .7 70-100-17 Threaded Valve with Rough Chrome Plating . . . . . . .7 70-100-27 Threaded Ball Valve with Latch Lock . . . . . . . . . . . .7 70-100-30 Threaded Ball Valve with Cam-Lock Handle . . . . . .7 70-100-41 Ball Valve with Automatic Drain . . . . . . . . . . . . . . .7 70-100-63 Ball Valve with Threaded and Solder Ends . . . . . . .7 70-120-01 Ball Valve With Adjustable Stop Lever . . . . . . . . .14 70-120-04 Valve w/Balancing Stop And Stem Extension . . . .14 70-140-64 250 Lb. Steam Valve . . . . . . . . . . . . . . . . . . . . . . .13 70-150-01 Ball Valve w/Standard Balancing Stop Plate . . . . . . .14 70-200-01 Standard Port Solder End Ball Valve . . . . . . . . . . .8 70-200-63 Ball Valve With Threaded And Solder Ends . . . . . . . .8 70-200-C8 Standard Port Bronze Ball Valve With 6" Female Brazed Extensions . . . . . . . . . . . . . . . . . . . . . . . . .15
Customer Service 1-704-841-6000
70-300-01 Ball Valve With Single Union End . . . . . . . . . . . . . .9 70-600-01 Threaded 3-Way Ball Valve . . . . . . . . . . . . . . . . . .10 70-800-01 Male x Female NPT Ball Valve . . . . . . . . . . . . . . . . .9 70-900-01 3-Way Diverter Valve With Solder Ends . . . . . . . .10 71-100-01 Ball Valve With Mounting Pad . . . . . . . . . . . . . . . .13 71-500-01 Ball Valve With Spring Return Handle . . . . . . . . . . . .20 75-100-41 Padlocking Ball Valve With Automatic Drain . . . . . . .24 77-100-01 Full-Port NPT Ball Valve . . . . . . . . . . . . . . . . . . . .12 77-200 Full-Port Solder End Ball Valve . . . . . . . . . . . . . . .12 77-200-C8 Full-Port Bronze Ball Valve With 6" Female Brazed Extensions . . . . . . . . . . . . . . . . . . . . . . . . .15 77-900-01 Full-Port SAE Straight-Thread O-Ring Boss Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . .12 77C-100 Full-Port Threaded Bronze Ball Valve . . . . . . . . . . . 4 77C-200 Full-Port Solder End Bronze Ball Valve . . . . . . . . . .4 78-100-27 Cap And Chain Valve With Threaded x 3/4 Inch Hose Connection . . . . . . . . . . . . . . . . . . . . . . . . . .27 78-114-01 SAE Male Thread Valve for Underground Service . . . . . . . . . . . . . . . . . . . . . .18 78-130 Series Female End Valve for Underground Service . . . . .18 78-250/260 Brass and Bronze Instrumentation Valves . . . . . . . . . . . .17 78-256-01 Fuel Shut-Off Valve With Mounting Ears . . . . . . . . . . .20 78-620-01 Threaded Irrigation Valve . . . . . . . . . . . . . . . . . . .18 78-664-01 Bronze Ball Valve With Center Drain . . . . . . . . . . .16 79-700-01 UL-Listed Refrigerant Ball Valve Assembly . . . . . . .15
Prev. Page |
Next
Commercial Products Catalog BUTTERFLY VALVE SECTION 141/143 Series General Purpose/Economy Design . . . . . . . .31 AUTOMATION SECTION Apollo® CompacTorque™ Pneumatic Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Apollo® AE Series Electric Actuators . . . . . .33 Accessories . . . . . . . . . . . . . . . . . . . . . . . . .34 Valve Position Monitors . . . . . . . . . . . . . . .34 Solenoids . . . . . . . . . . . . . . . . . . . . . . . . . .34 Positioners . . . . . . . . . . . . . . . . . . . . . . . . .34
Section Series/Part No. . . . . . . . . . .Page 7B-100-01 Full-Port Hydro Valve With Double Female NPT . .11 7B-300-01 Full-Port Hydro Valve With Two Female NPT Ports And Single Union End . . . . . . . . . . . . . . . . . . . . .11 7B-800-01 Male x Female Full-Port Hydro Ball Valve . . . . . . .11 7K-100-01 Full-Port Safety Exhaust Valve With 1/4" NPT Tap For Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 80-100-01: UL-Listed Gas Shut-Off Valve . . . . . .23 82-100-01: Full-Port 3-Piece Valve . . . . . . . . . . .24 82-100-19 Full-Port 3-Piece Valve With Locking Plate . . . . . .25 82-100-63 Full-Port 3-Piece Valve with NPT & Solder Ends . . . .25 82-140-57 Full-Port 3-Piece Valve With 316 Stainless Steel Ball/Stem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 82-200-01 Full-Port 3-Piece Solder End Valve . . . . . . . . . . . .25 82-200/82-240 3-Piece Full-Port Valve With Brazed Tubing . . . . .26 90-100-01 UL Listed Uni-Body Threaded Ball Valve . . . . . . . .23 91-100-01 Threaded Uni-Body Ball Valve . . . . . . . . . . . . . . . .27 94 MBV: Mini Ball Valve . . . . . . . . . . . . . . . . . . . .17 95-200-01 Full-Port Solder End Stop And Waste Valve . . . . .16 95A Series Full-Port Brass Ball Valve With Stop & Waste . . . . . . .29 9A-100-01 Heavy Pattern Uni-Body Threaded Ball Valve . . . . . . . . .26 Dual Wye Auto Drain Ball Valve . . . . . . . . . . . . . .27 GB-10 CSA-Design Certified Gas Shut-Off Valve . . . . . . . .21 GB-12, GB-13, GB-14, GB-15, GB-16 Series Gas Appliance Ball Valves . . . . . . . . . . . . . . . . . . . . . .21 GB-50/50A: CSA Gas Shut-Off Ball Valves . . . . . .22 IBV-125 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .28 IBVD-125 Series . . . . . . . . . . . . . . . . . . . . . . . . . .28 IBVE-125 Series . . . . . . . . . . . . . . . . . . . . . . . . . .28 NUMBERING SYSTEM . . . . . . . . . . . . . . . . . . . . .30
Contents | Back
COMMERCIAL PRODUCTS Pressure Relief Valves 10-322 & 10-512 ASME Section VIII Steam Safety Relief Valves . . . .39 119 Series ASME Section I & VIII Cast Iron Safety Valves . .43 12-200 Series Low Pressure Steam Boiler Safety Valves . .37 13 Series Low Pressure Steam Heating Boiler Safety Valves 38 14-200 High Capacity Low Pressure Steam Boiler Safety Valves . . . . . . . . . . . . . . . . . . . . . . . .38 15 Series: ASME Air Relief Valve . . . . . . . . .46 16 ARV Series . . . . . . . . . . . . . . . . . . . . . . .35 16 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .35 16-501 Series . . . . . . . . . . . . . . . . . . . . . . .35 18 Series: Water Heater T & P Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . .36 18-402X Series: Extended Shank Water Heater T & P Relief Valves . . . . . . . . . . . . . . . . . . .36 18-500 Series: Corrosion Resistent Commercial T & P Valves . . . . . . . . . . . . . .37 19 Series: ASME Section I & VIII Bronze Safety Valves . . . . . . . . . . . . . .40-41 29 Series: ASME Section I & VIII OEM Style Bronze Safety Valves . . . . . . .42 37 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .47 500 Series ASME Section VIII Safety Relief Valves . . . . . . . . . . . . . . . .44-45 Drip Pan Elbow . . . . . . . . . . . . . . . . . . . . . .44 Hydronic Heating 16-XT Series Expansion Tanks For Hydronics Systems . .48 27 Series: Radiator Air Valve . . . . . . . . . . . .48 35 Series All Bronze Feed Water Pressure Regulators . . .48 35FC Series All Bronze Hydronic Flow Check Valve . . . .49 35-403 Series: Multi-Orifice Control Valve .49 35-6A3, 35-6H3 Series Combination Backflow Preventer And Feed Regulator . . . . . . . . . . . . . . . . . . .49 35FV Series: Automatic Air Vent . . . . . . . . .50 57 Series: Globe Valves . . . . . . . . . . . . . . . .50 58 Series: Balancing Valves . . . . . . . . . . . .50 78-300-FV Series . . . . . . . . . . . . . . . . . . . .50 78-668 Series Bronze Purge, Balance & Shut-off Valve . . .50 Water Heater Accessories 40 XT Series Expansion Tanks For Potable Systems . . . .52 78 RV Series Bronze Water Heater Shut-off Valve With Thermal Expansion Control . . . . . . . . . . . . .52
Pressure Reducing Valves 36 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .54 36A Series . . . . . . . . . . . . . . . . . . . . . . . . . .56 36C Series . . . . . . . . . . . . . . . . . . . . . . . . .55 36H Series . . . . . . . . . . . . . . . . . . . . . . . . .57 W-8078-00 Series 3/4" Hose Thread Pressure Gauges . . . . . . .58 Relief Valves Section IV ASME Hot Water Safety Relief Valves 10 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .58 10-600 Series . . . . . . . . . . . . . . . . . . . . . .59 17 Series . . . . . . . . . . . . . . . . . . . . . . . . . . .59
IN-LINE CHECK VALVE SECTION 61-100 Series Bronze Ball Cone® Check Valves . . . . . . . . .89 61-200 Series Bronze Ball Cone® Check Valves . . . . . . . . .89 61-500 & 62-500 Series: Soft Seat . . . . . . .90 61-600 Series: Solder End Soft Seat . . . . . .91 61-700 Series Brass NPT Mini Check Valves . . . . . . . . . . .91 62-100 Series Stainless Steel Ball Cone® Check Valves . . .90
PIPELINE STRAINERS SECTION 59 Series: Bronze NPT Y Strainer . . . . . . . .92 59-300 Series BACKFLOW PREVENTERS SECTION Bronze Sweat End Y Strainer . . . . . . . . . . . .92 59V Series:“Mini” Strainer . . . . . . . . . . . . .93 38-100 Series Atmospheric Type Vacuum Breaker . . . . . . .83 FC1, FC2 Cast Iron Pipe Flanged Y Strainer . . . . . . .94 38-200 Series Atmospheric Type Vacuum Breaker (Forged Body) .84 Flanged Cast Bronze Y Strainers 539 Series Class 150 & 300 . . . . . . . . . . . .93 38-300 Series 3/4" Hose Connection Vacuum Breakers . . .82 TCG Series Cast Iron Pipe Threaded Y Strainer . .93 38-400 Series WATER GAUGE SECTION 3/4" Anti-Freeze Hose Connection Vacuum Breakers . . . . . . . . . . . . . . . . . . . . .82 20-100 & 20-150 Series . . . . . . . . . . . . . . .95 20-200, 20-250 & 25-200 Series . . . . . . . .95 38-502 Series Lab Faucet Vacuum Breaker . . . . . . . . . . . .85 20-300, 20-350, 25-400 & 25-500 Series . . . . . . . . . . . . . . . . . . . . .96 40-000 Series Freeze Protection Valve . . . . . . . . . . . . . . . .86 20-400 & 20-410 Series . . . . . . . . . . . . . . .96 20-700 & 20-710 Series . . . . . . . . . . . . . . .97 40-100-T2 Double Check Valve Assembly . . . . . . . . . .60 23-600 Series . . . . . . . . . . . . . . . . . . . . . . .97 20-600 & 20-800 Series . . . . . . . . . . . . . . .98 40-100-TC2 Double Check Valve Assembly . . . . . . . . . .61 24-600 & 24-650 Series . . . . . . . . . . . . . . .98 20-600 & 25-600 Series . . . . . . . . . . . . . . .99 40-200 Series: Epoxy Coated Reduced Pressure Principle . . . . . . . . . . . . . . . . .69-70 24-300 & 24-350 Series . . . . . . . . . . . . . . .99 21 Series . . . . . . . . . . . . . . . . . . . . . . . . . .100 40-200-T2 Series Bronze Reduced Pressure Principal . . . . . . .66 23-400 & 23-450 Series . . . . . . . . . . . . . .100 Tubular Gauge Glass Protector . . . . . . . . .101 40-200-T2S Stainless Steel Reduced Pressure Backflow Preventer . . . . . . . . . . . . . . . . . . . . . . . . . . .67 PLUMBING SPECIALTIES 26-100 & 26-300 Series . . . . . . . . . . . . . .102 40-200-TC2 Bronze Reduced Pressure Principle . . . . . . .65 3T-WMV Series: Washing Machine Control Valve . . . . . . . . . . . . . . . . . . . . . . .102 40-200-TCU 35-200 Series: Compression Bibb Faucet .102 U-Flow Bronze Reduced Pressure Principle Backflow Preventer . . . . . . . . . . . . . . . . . . .68 35-300 Series: Ball Valve Bibb Faucet . . . .102 40-200-TK . . . . . . . . . . . . . . . . . . . . . . . . . .87 39-100 Series: Hoist Control Valve . . . . . .103 40-200-TK5 (All RPZ, DCV, PVB & SVB) . .87 45-100 Series: Oil Tank Valves . . . . . . . . .103 45-201 & 45-301 Series: Barrel Faucets . .103 40-200-TKRC 78-124 & 78-125 Series: Non-Potable Test Kit (All RPZ, DCV, PVB & SVB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 5-Port Tank Selector . . . . . . . . . . . . . . . . .103 40-300 Series: Dual Check Valve . . . . . . . .72 41 Series: Air Cocks . . . . . . . . . . . . .104-105 41 Heavy & Extra Heavy: 40-400 Series Continuous Pressure Backflow Preventer . .75 Pattern Air Cocks . . . . . . . . . . . . . . . . . . .106 42-100 Series: Drain Cocks . . . . . . . . . . .106 40-700 Series Reduced Pressure Detector Assembly . .80-81 43-100 Series: Steam Gauge Cocks . . . . .107 44-100 Series: Hosed End Cocks . . . . . . .107 4C-100 Series Carbonated Beverage Backflow Preventer . . .73 46-100 Series: Standard Cocks . . . . . . . . .107 50 Series: Manual Main Control Valves . .108 4V-500 Series Freeze Resistant Vacuum Breaker . . . . . . . .76 51 Series: Gas Service Cocks . . . . . . . . . .108 52 Series: Gas Service Cocks . . . . . . . . . .109 4V-500-TC2 Series Pressure Vacuum Breaker . . . . . . . . . . . . . .77 53 Series: Gas Cocks . . . . . . . . . . . . . . . .109 54 Series: Gas Hose Cocks & Appliance 4W-500 Series:Spill-Resistant Pressure Vacuum Breaker . . . . . . . . . . . . . . . . . . . . .74 Connector Valve . . . . . . . . . . . . . . . . . . . .109 55-302 Series: Gas Cock Model DC 4S Double Check Assemblies . . . . . . . . . . .62-64 with Throttle Adjustment . . . . . . . . . . . . . .109 56 Series: Pilot Cocks . . . . . . . . . . . . . . . .110 Model DCDA 4S Double Check Detector Assembly . . . . .78-79 Terms And Conditions/Warranty . . . . . . . .111 Model RP 4S: Reduced Pressure Principle Assemblies . . . . . . . . . . . . . . . . . .71 Air Gap Drain . . . . . . . . . . . . . . . . . . . . . . .88
Mixing Valves TV Series . . . . . . . . . . . . . . . . . . . . . . . . . . .51 34A and 34H Series . . . . . . . . . . . . . . . . . .51 34B Series . . . . . . . . . . . . . . . . . . . . . . . . . .53 34C Series . . . . . . . . . . . . . . . . . . . . . . . . .51 34D Series . . . . . . . . . . . . . . . . . . . . . . . . .53 Mixing Valve Set Thermometer . . . . . . . . . .53
Customer Service 1-704-841-6000
Prev. Page |
Next
3
Ball Valves
Apollo® 77C: The Contractors’ Full-Port Bronze Ball Valve 77C-100 & 77C-200
Full Port Bronze Ball Valve with Solid Ball Apollo’s® solid ball design delivers real full-port performance. Some valve manufacturers use a hollow ball in their “full-port” ball valves. A hollow ball creates turbulence inside the valve which causes significant drops in pressure and velocity. Plus, the media bouncing around inside the ball adds unnecessary stress to the valve and the system, leading to even more problems down the line.
Get solid full-port performance at an affordable price with the American-made Apollo 77C. • • • • • • • •
Machined solid chrome-plated ball 600 psig CWP and 150 psig SWP Multi-fill PTFE seats and seals Adjustable packing Blow-out proof stem design American-made bronze castings Vacuum service to 29 in. Hg Full-port design through 2”
• Available with stainless steel ball and stem as 77C-140 Series (threaded), 77C-240 Series (solder) • ANSI B16.18 solder end version available as 77C-200 Series • Options - SS latch-lock handle (-27), - 2-1/4" stem extension (-04) - SS oval locking handle (-47) - CS T-handle (-07)
Model Number 77C-101 77C-102 77C-103 77C-104 77C-105 77C-106 77C-107 77C-108
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00
B 0.95 1.07 1.15 1.32 1.53 2.04 2.21 2.76
C 1.97 2.09 2.25 2.65 3.07 4.08 4.43 5.29
D 1.76 1.76 1.79 2.00 2.19 3.13 3.29 3.83
Dimensions (in.) E F G H 3.74 1.86 4.06 1.41 3.74 1.86 4.06 1.41 3.74 1.89 4.06 1.44 4.88 2.20 5.03 1.76 4.88 2.39 5.03 1.96 7.06 3.76 7.19 2.82 7.06 3.92 7.19 2.98 7.06 4.46 7.19 3.52
I 3.50 3.50 3.50 4.00 4.00 6.00 6.00 6.00
J 2.80 2.80 2.83 3.12 3.32 -
K 3.12 3.12 3.12 3.12 3.12 -
L 4.12 4.12 4.12 4.12 4.12 -
Wt. M Cv (lbs) -01 3.86 4.5 0.6 3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.1 4.29 68.1 1.8 5.23 125.0 4.4 5.39 177.0 5.9 5.93 389.0 11.4
77C-202 77C-203 77C-204 77C-205 77C-206 77C-207 77C-208
3/8 1/2 3/4 1 1-1/4 1-1/2 2
0.37 0.50 0.75 1.00 1.25 1.50 2.00
0.93 1.15 1.39 1.69 2.08 2.33 2.95
1.84 2.31 2.79 3.38 4.16 4.66 5.84
1.76 1.79 2.00 2.19 3.13 3.29 3.83
3.74 3.74 4.88 4.88 7.06 7.06 7.06
3.50 3.50 4.00 4.00 6.00 6.00 6.00
2.80 2.83 3.12 3.32 -
3.12 3.12 3.12 3.12 -
4.12 4.12 4.12 4.12 -
3.86 7.2 0.6 3.89 15.5 0.6 4.10 35.6 1.0 4.29 68.1 1.6 5.23 125.0 3.9 5.39 177.0 5.8 5.93 389.0 10.2
1.86 1.89 2.20 2.39 3.76 3.92 4.46
4.06 4.06 5.03 5.03 7.19 7.19 7.19
1.41 1.44 1.76 1.96 2.82 2.98 3.52
Technical Information
77C-100
Technical Information 77C-200
4
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
Regular Port Economy Valves 32-100-01
Regular Port Threaded Bronze Ball Valve NPT threaded ball valve rated to 400 psig WOG cold, non-shock and 125 psig for saturated steam. Blowout-proof stem design with adjustable packing gland. • Chromium plated ball • PTFE seats and MPTFE stuffing box ring Model Number 32-101-01 32-102-01 32-103-01 32-104-01 32-105-01 32-106-01 32-107-01 32-108-01
32-200-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.40 0.65 0.75 1.00 1.12 1.50
B 0.80 0.80 1.00 1.20 1.55 1.72 1.93 2.17
Dimensions (in.) C D 1.60 1.65 1.60 1.65 2.00 1.68 2.41 1.90 3.09 2.18 3.44 2.53 3.87 2.69 4.37 2.94
E 2.87 2.87 2.87 3.87 4.87 5.50 5.50 5.50
Regular Port Solder End Bronze Valve Solder end ball valve with vacuum service to 29" Hg. Rating of 400 psig WOG cold, non-shock and 125 psig for saturated steam. Blowout-proof stem design with adjustable packing gland. • Chromium plated ball • PTFE seats and MPTFE stuffing box ring
Model Number 32-203-01 32-204-01 32-205-01 32-206-01 32-207-01 32-208-01
Contents | Back
Customer Service 1-704-841-6000
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2
A 0.40 0.65 0.75 1.00 1.12 1.50
B 1.29 1.73 2.11 2.36 2.84 3.33
Dimensions (in.) C D 2.65 1.68 3.56 1.90 4.26 2.18 4.60 2.53 5.42 2.69 6.48 2.94
Prev. Page |
E 2.87 3.87 4.87 5.50 5.50 5.50
Next
5
Ball Valves
General Purpose Standard Port Valves 70-100-01
Standard Port Threaded Ball Valve This Conbraco general purpose valve is the most widely used bronze ball valve in the industry. Like all 70 Series valves, it features a blowout-proof stem, RPTFE seats and stuffing box ring, adjustable packing gland and chromium-plated ball. • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam
Technical Information
70-100-03/04
Model Number 70-101 70-102 70-103 70-104 70-105 70-106 70-107
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25
Dimensions* (in.) B 1.03 1.03 1.12 1.50 1.68 2.00 2.18
C 2.06 2.06 2.25 3.00 3.37 4.00 4.37
70-108 70-109 70-100 70-10A✝
2 2-1/2 3 4
1.50 2.00 2.50 3.12
2.34 3.12 3.37 3.68
4.68 6.25 6.75 7.37
*Body only. Total will vary with handle and end connection options. Contact Conbraco Customer Service for these dimensions. All 70-100 Series valves are available in sizes 1/4" through 4". ✝High capacity water valve, formerly 78-255-01
Standard Ball Valve with Stem Extension Ideal for hydronic or low pressure steam applications, this valve features a stem extension to accommodate insulation or to relocate handle position. This ball valve is equipped with chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland. • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam • Specify -03 for 1-1⁄4” extension, -04 for 2-1⁄4” extension
6
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
70-100-16/58 Chain Lever Ball Valves
70-100-07
• Specify suffix -16 for assembly with valve in vertical position • Specify -58 for valve in horizontal position
70-100-08
Threaded Ball Valve with 90° Reversed Stem
• Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam
70-100-17
Use in critical applications when handle is required to be in a parallel position when closed. Features chromium-plated ball, RPTFE seats and stuffing box ring. Rated 600 psig WOG, cold, non-shock; 150 psig for saturated steam.
Threaded Ball Valve with Latch Lock
• Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam
70-100-41
• Conforms to certain OSHA requirements in pneumatic installations • Easy, safe maintenance of pneumatic tools • Cannot be used where drained media could cause damage • Temperature range = 50°F to 200°F • Rated 125 psig air or water • Available with latch lock option, specify -27 -41 suffix
• 600 psig WOG, cold, non-shock • 150 psig for saturated steam • Available with auto drain option for pneumatic applications. Use the following suffix key to specify latch lock valve with auto drain option: -27 -41
Threaded Ball Valve with Cam-Lock Handle Patented Cam-Lock® handle gives valve extra protection against accidental operation. Reliable quarter-turn shutoff from a versatile, ruggedly built valve. • RPTFE seats and stuffing box ring • Rated 600 psig WOG, cold, non-shock
Optional Configurations Information
Contents | Back
Customer Service 1-704-841-6000
Ball Valve with Automatic Drain When this valve is shut-off for maintenance of pneumatic tool, pressure from valve to tool is automatically drained to atmosphere to prevent accidental operation of the tool, causing possible injury.
Sliding lock mechanism secures handle in open or closed position. Valve can also be padlocked open or closed. Valve features blowout proof stem, RPTFE seats and stuffing box ring, chrome plated ball and adjustable packing gland.
70-100-30
Threaded Valve with Rough Chrome Plating Use where a clean environment is required; for matching up with other chrome-plated equipment. Features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland.
• Blowout-proof stem design • Adjustable packing gland
70-100-27
Threaded Valve with Tee Handle Tee handle is ideal when space is limited and where safety is a consideration. Handle still provides visual indication of OPEN or CLOSED position. Valve features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland.
Reliable quarter turn operation in overhead applications. A favorite for use in industrial environments. Standard design features include blowout-proof stem and RPTFE seats and seals.
70-100-63
Ball Valve with Threaded and Solder Ends Eliminates need for special pipe connector when connecting to different pipe such as iron pipe or copper tubing. Valve offers reliable shut-off and easy quarterturn operation; ruggedly built with a chromium-plated ball, a blowout-proof stem design and RPTFE seats and stuffing box ring. • 150 psig for saturated steam • Rated 600 psig WOG, cold, non-shock • Body is threaded, retainer is solder end
Prev. Page |
Next
7
Ball Valves
70-200-01
Solder End Ball Valve Reliable ball valves designed for soft-soldering into lines without the need for disassembly. Tested valve installs without disturbing seats and seals. Soldering temperature: 500°F or less. • Vacuum service to 29” Hg • Adjustable packing gland
Model Number 70-202 70-203 70-204 70-205 70-206 70-207 70-208 70-209 70-200
• RPTFE seats and stuffing box ring
Size (in.)* 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.00 2.50
B 1.28 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12
Dimensions (in.) C D E 2.56 1.75 3.87 2.87 1.75 3.87 3.87 2.12 4.87 4.50 2.25 4.87 4.62 2.62 5.50 5.25 3.06 8.00 6.37 3.25 8.00 7.51 3.72 8.00 8.25 4.12 8.00
F 0.505 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13
G 0.37 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67
*Based on 70-200-01 – Dimensions may vary with options. Contact Conbraco customer service for dimensions on 70-200-63.
Technical Information
70-200-63
Ball Valve With Threaded And Solder Ends Eliminates special pipe connector for connecting dissimilar piping such as iron and copper. Reliable shut-off and easy quarter-turn operation. Features chromium-plated ball, a blowout-proof stem design and RPTFE seats and stuffing box ring. • 150 psig for saturated steam • Rated 600 psig WOG, cold, non-shock • Body is solder, retainer is threaded
8
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
70-300-01
Ball Valve With Single Union End This valve combines pipe union with ball valve shut-off; it saves time and labor by eliminating the need for extra connections. Viton O-Ring sealed union requires light torque for proper seal. • Chromium-plated ball • Blowout-proof stem design • Adjustable packing gland Model Number 70-301-01 70-302-01 70-303-01 70-304-01 70-305-01 70-306-01 70-307-01 70-308-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50
B 1.90 1.90 2.01 2.46 2.78 2.68 2.87 3.25
Dimensions (in.) C D 2.93 1.75 2.93 1.75 3.14 1.81 3.96 2.12 4.46 2.25 4.68 2.62 5.06 3.05 5.59 3.24
E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00
Technical Information
70-800-01
Male x Female NPT Ball Valve Eliminates need for extra nipple when connecting to female connection to save time and labor. Ruggedly built for lasting performance with chromium-plated ball and blowout-proof stem design. • Vacuum service to 29" Hg. • RPTFE seats and stuffing box ring
Model Number 70-801-01 70-802-01 70-803-01 70-804-01 70-805-01 70-806-01 70-807-01
E
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25
B 1.40 1.46 1.68 2.00 2.31 2.31 3.00
Dimensions (in.) C D 2.43 1.75 2.50 1.75 2.81 1.81 3.50 2.12 4.00 2.25 4.31 2.62 5.18 3.06
E 3.87 3.87 3.87 4.87 4.87 5.50 8.00
Technical Information D
A
B C
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
9
Ball Valves
Diverter Valves 70-600-01
Threaded 3-Way Ball Valve Ideal for applications requiring flow diversion, this valve combines the features of two 2-way valves. Its large ports make tank selection and fluid transfers simpler. Easy quarter-turn operation. Drilled and tapped mounting pad for panel mounting. • 400 psig WOG rating • 100 percent air tested under water
Model Size Number (in.) 70-601-01 1/4 70-602-01 3/8 70-603-01 1/2 70-604-01 3/4 70-605-01 1 70-606-01 1-1/4 70-607-01 1-1/2 70-608-01 2
A 0.37 0.37 0.50 0.68 0.81 1.00 1.25 1.50
B 1.12 1.12 1.09 1.50 1.59 1.97 2.21 2.34
Dimensions (in.) C D E F 2.32 1.80 3.88 1.18 2.32 1.80 3.88 1.18 2.25 1.75 3.87 1.18 3.00 2.12 4.87 1.62 3.18 2.25 4.87 1.71 3.95 2.69 5.50 2.01 4.40 2.87 5.50 2.38 4.69 3.00 5.50 2.50
G 0.875 0.875 0.87 0.87 0.87 0.93 0.94 0.94
H 1.37 1.37 1.37 1.37 1.37 1.50 1.50 1.50
I 10-24 10-24 10-24 10-24 10-24 1/4-20 1/4-20 1/4-20
Technical Information
70-900-01
3-Way Diverter Valve With Solder Ends Tank selection and fluid transfers are easier because of this diverter valve’s large ports. Rated 400 psig WOG. The valve is 100 percent air tested under water. • Simple quarter-turn operation • Many long service life features Model Number 70-903-01 70-904-01 70-905-01
Size (in.) 1/2 3/4 1
A 0.50 0.68 0.81
B 1.44 1.94 2.19
Dimensions (in.) C D E F G 2.87 1.75 3.87 1.34 0.628 3.87 2.12 4.87 1.69 0.878 4.42 2.25 4.87 1.87 1.129
H 0.50 0.90 0.90
Prev. Page |
Next
Technical Information
10
Contents | Back
Customer Service 1-704-841-6000
Ball Valves
Two-Piece Full-Port Valves 7B-100-01
Full-Port Hydro Valve With Double Female NPT Design features tee handle and side tapping; can be used as a drain feature or with 1/8" and 1/4" test cocks. Valve offers extended service life with its chromium-plated ball and RPTFE seats and stuffing box ring. • Rated 400 psig WOG, cold, non-shock • Blowout-proof stem design Model Number 7B-101-01 7B-102-01 7B-103-01 7B-104-01 7B-105-01 7B-106-01 7B-107-01 7B-108-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00
B 1.03 1.03 1.09 1.28 1.66 1.87 2.05 2.47
Dimensions (in.) C D E F 2.06 1.37 2.68 0.93 2.06 1.37 2.68 0.93 2.18 1.43 2.68 1.00 2.68 1.62 3.00 1.12 3.43 1.90 4.00 1.31 3.87 2.18 4.00 1.62 4.22 2.60 5.62 1.81 5.02 2.95 5.62 2.18
G 0.53 0.53 0.53 0.75 0.94 1.15 1.31 1.68
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Technical Information
7B-300-01
Full-Port Hydro Valve With Two Female NPT Ports And Single Union End Valve offers union ends to make assembly and disassembly easier. Rated 400 psig WOG, cold, non-shock, it is equipped with a rugged chromium-plated ball and PTFE seats and stuffing box ring. • Stem designed to be blowout-proof • Full flow, minimum pressure drop Model Size Number (in.) 7B-301-01 1/4 7B-303-01 1/2 7B-304-01 3/4 7B-305-01 1 7B-307-01 1-1/2 7B-308-01 2
A 0.37 0.50 0.75 1.00 1.50 2.00
B 2.13 2.21 2.25 2.71 3.43 4.00
Dimensions (in.) C D E F 2.92 1.37 2.68 0.93 3.08 1.43 2.68 0.93 3.67 1.62 3.00 1.12 4.50 1.90 4.00 1.31 5.62 2.60 5.62 1.81 6.56 2.95 5.62 2.18
G 0.53 0.53 0.75 0.94 1.31 1.68
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT
Technical Information
7B-800-01
Male x Female Full-Port Hydro Ball Valve Eliminates leak path and need for extra nipples. Full-Port design assures full flow and minimum pressure drop. Longlife features include adjustable packing gland, chromium-plated ball and RPTFE stuffing box ring. • Rated 125 psig for saturated steam • 400 psig WOG, cold, non-shock Model Number 7B-801-01 7B-802-01 7B-803-01 7B-804-01 7B-805-01 7B-806-01 7B-807-01 7B-808-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00
B 1.40 1.46 1.68 1.88 2.39 2.66 2.86 3.34
Dimensions (in.) C D E F 2.43 1.37 2.56 0.93 2.50 1.37 2.56 0.93 2.78 1.43 2.56 1.00 3.28 1.70 2.68 1.12 4.17 1.93 3.62 1.31 4.66 2.13 3.62 1.62 5.03 2.71 5.12 1.81 5.89 3.06 5.12 2.18
G 0.53 0.53 0.53 0.75 0.94 1.15 1.31 1.68
H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT
Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
11
Ball Valves
77-100-01
Full-Port NPT and Solder Ball Valve Designed for easy actuator mounting or panel mounting where highest Cv values are required. Chromium-plated ball and RPTFE seats and stuffing box ring. Also available with solder connections and 250 lb. steam trim option. • Full flow and minimum pressure drop • Extended stems optional
Model Number 77-101-01 77-102-01 77-103-01 77-104-01 77-105-01 77-106-01 77-107-01 77-108-01 77-109-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
• Chain lever kits available 3⁄4" - 2 1⁄2"
A 0.43 0.50 0.50 0.81 1.00 1.25 1.50 2.00 2.50
B 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65 3.25
C 2.25 2.25 2.25 3.12 3.62 4.25 4.75 5.37 6.50
Dimensions (in.) D 1.81 1.81 1.81 2.12 2.62 2.87 3.34 3.71 4.12
E 3.87 3.87 3.87 4.87 5.50 5.50 8.00 8.00 8.00
F 0.50 0.50 0.50 0.87 0.93 0.93 2.08 2.41 2.75
G 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52 3.37
Technical Information
77-200
Full-Port Solder End Ball Valve The 70-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500˚F. • Chromium plated ball • Blow-out-proof stem design • RPTFE seats and stuffing box ring
Model Number 77-204-01 77-205-01 77-206-01 77-207-01 77-208-01 77-209-01
Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2
• Full port for full flow & min. pressure drop • Adjustable packing gland
A 0.81 1.00 1.25 1.50 2.00 2.50
B 2.12 2.33 2.60 3.00 3.62 3.93
C 4.12 4.60 5.15 6.00 7.24 7.87
Dimensions (in.) D 2.12 2.62 2.87 3.34 3.71 4.12
E 4.87 5.50 5.50 8.00 8.00 8.00
F 0.88 1.13 1.38 1.63 2.13 2.63
G 0.75 0.90 0.96 1.09 1.34 1.48
Technical Information
77-900-01
Full-Port SAE Straight-Thread O-Ring Boss Ball Valves Apollo® full-port SAE straight thread ball valves with O-Ring boss connections are designed for extended leak-free and energy saving performance in a broad range of applications, especially in manufacturing environments. Their straight thread sealing technology is in high demand in the automotive industries and in fluid power applications. Sizes 1/4" to 2". Rated 600 WOG cold non-shock, 150 psig steam. • Drilled and tapped actuation pad standard • Chrome plated ball standard Model Nom. Tube Number O.D. (in.) 77-901-01 1/4 77-902-01 3/8 77-903-01 1/2 77-904-01 3/4 77-905-01 1 77-906-01 1-1/4 77-907-01 1-1/2 77-908-01 2
Size (in.) 7/16-20 9/16-18 3/4-16 11/16-12 15/16-12 1-5/8-12 1-7/8-12 2-1/2-12
A 0.43 0.50 0.50 0.81 1.00 1.25 1.50 2.00
• Blowout-proof stem and lever handle standard
B 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65
Dimensions (in.) C D E 2.25 1.81 3.87 2.25 1.81 3.87 2.25 1.81 3.87 3.12 2.12 4.87 3.62 2.62 5.50 4.25 2.87 5.50 4.75 3.34 8.00 5.37 3.71 8.00
F 0.50 0.50 0.50 0.87 0.93 0.93 2.08 2.41
G 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52
Technical Information
12
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
Standard Port Two-Piece Valve w/Mounting Pad 71-100-01
Ball Valve With Mounting Pad Valve designed to easily accommodate spring return handle, actuator or simple panel mounting. Threaded end connections with RPTFE seats and stuffing box ring. Standard port. • 3⁄4" to 3" models (See 77 Series for 1/4"-1/2") • Round handle optional Model Size Number (in.) 71-104-01 3/4 71-105-01 1 71-106-01 1-1/4 71-107-01 1-1/2 71-108-01 2 71-100-01 3
A 0.68 0.87 1.00 1.25 1.50 2.50
B 1.50 1.68 2.00 2.18 2.34 3.37
Dimensions (in.) C D E F 3.00 2.12 4.87 0.87 3.37 2.25 4.87 0.87 4.00 2.62 5.50 0.93 4.37 2.87 8.00 0.93 4.68 3.06 8.00 0.93 6.75 4.12 8.00 N/A
G 1.37 1.37 1.50 1.50 1.50 2.75
H 10-24 NC 10-24 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC 1/4-20 NC
Technical Information
3/4" - 2" Size
Steam Valves 70-140-64
250 Lb. Steam Valve Designed for reliable operation on high pressure steam systems and with fluids of widely varying temperatures. Ideal for use with high thermal expansion rates. Stainless steel ball and stem standard. Ball has a thermal relief hole drilled into stem slot. • SS ball and stem • Multi-filled RPTFE seats • Special high-temperature MTFE stem packing
Model Number 70-141-64 70-142-64 70-143-64 70-144-64 70-145-64 70-146-64 70-147-64 70-148-64 70-140-64
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 3
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50
Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.75 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 3.06 2.34 4.68 3.25 3.37 6.75 4.12
E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00
(*Also available in 71 & 77 Series) Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
13
Ball Valves
Hydronic Valves 70-120-01
Ball Valve With Adjustable Stop Lever This versatile hydronic valve provides easy screw controlled incremental balancing adjustments when variation is needed. Special design makes a model combination shut-off and balancing valve.
E
D
70-120-04
Model Number 70-121-01 70-122-01 70-123-01 70-124-01 70-125-01 70-126-01 70-127-01 70-128-01 70-129-01 70-120-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50
Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.75 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 3.06 2.34 4.68 3.25 3.25 6.50 4.12 3.37 6.75 4.12
E 3.87 3.87 3.87 4.87 4.87 5.56 5.56 5.56 5.56 5.56
Valve With Balancing Stop And Stem Extension Ideal for HVAC systems, valve offers a balancing stop plate and a 2-1/4" stem extension combination to accommodate insulation and handle repositioning. Rated 600 psig WOG, cold, non-shock; 150 psig for saturated steam. • Chromium-plated ball • RPTFE seats, stuffing box ring • Blowout-proof stem design and adjustable packing gland • Contact customer service for exact handle dimensions
70-150-01
Ball Valve With Standard Balancing Stop Plate Designed for hydronic applications, this valve comes with a simple stop plate that fits over its standard lever handle. Also available with tee or round handles. Features a chromium-plated ball, RPTFE seats and stuffing box ring, a blowout-proof stem design and adjustable packing gland. • Rated 600 psig WOG, cold, non-shock • 150 psig for saturated steam
14
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
“Safe” Solder Valves (Two Piece) See page 26 for three piece version.
70-200-C8
Bronze Standard Port Ball Valve With 6” Female Brazed Extensions (Solder Cup) Solder end, 600 psig WOG, cold non-shock. 150 psig Saturated Steam.
Technical Information
• • • •
Chromium plated ball Adjustable packing gland RPTFE seats and stuffing box ring Blow-out proof stem design Model Number 70-203-C8 70-204-C8 70-205-C8 70-206-C8 70-207-C8 70-208-C8 70-209-C8A 70-200-C8
77-200-C8
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 0.50 0.68 0.87 1.00 1.25 1.50 2.00 2.50
B 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12
Dimensions (in.) C D E F 2.87 1.75 3.87 0.63 3.87 2.12 4.87 0.88 4.50 2.25 4.87 1.13 4.62 2.62 5.50 1.38 5.25 3.06 8.00 1.63 6.37 3.25 8.00 2.13 7.51 3.75 8.00 2.63 8.25 4.12 8.00 3.13
G 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67
H 14.87 15.87 16.50 16.62 17.25 18.37 19.51 20.25
G 0.75 0.90 0.96 1.09 1.34 1.48
H 16.12 16.64 17.15 18.00 19.24 19.87
Bronze Full-Port Ball Valve With 6" Female Brazed Extensions (Solder Cup) Solder end, 600 psig WOG, Cold Non-shock. 150 psig Saturated Steam.
Technical Information
• • • • •
Chromium plated ball Adjustable packing gland RPTFE seats and stuffing box ring Blow-out proof stem design Full-Port for full flow and min. pressure drop
Model Number 77-204-C8 77-205-C8 77-206-C8 77-207-C8 77-208-C8 77-209-C8
79-700-01
Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2
A 0.81 1.00 1.25 1.50 2.00 2.50
B 2.12 2.33 2.60 3.00 3.62 3.93
Dimensions (in.) C D E F 4.12 2.12 4.87 0.88 4.64 2.62 5.50 1.13 5.15 2.87 5.50 1.38 6.00 3.34 8.00 1.63 7.24 3.71 8.00 2.13 7.87 4.12 8.00 2.63
UL-Listed Refrigerant Ball Valve Assembly Built for easy installation and long service life. Complete hermetically welded assembly includes copper extensions and forged brass refrigerant ball valve with capped, triple-sealed stem to reduce leaks. Sizes from 3/8" to 3-1/8" O.D. Tube. Chrome plated ball; RPTFE seats and seals. • Full-port through 2-5⁄8" • Bi-directional flow design • All sizes UL listed
Model Number 79-701-01 79-702-01 79-703-01 79-704-01 79-705-01 79-706-01 79-707-01 79-708-01 79-709-01 79-600-01
Size (in.) 3/8 1/2 5/8 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8
Dimensions (in.) A B C D 3.38 6.45 0.45 1.56 3.38 6.45 0.45 1.56 3.56 6.82 0.50 1.56 3.91 7.53 0.68 1.79 4.39 8.51 0.87 1.98 4.42 8.94 1.25 2.62 4.55 9.19 1.25 2.62 5.16 10.31 1.50 2.93 6.50 13.00 2.50 3.90 7.00 14.00 2.50 3.90
E 0.38 0.38 0.50 0.75 0.90 0.96 1.09 1.34 1.48 1.67
F 0.38 0.50 0.62 0.87 1.12 1.38 1.62 2.12 2.62 3.12
Cv* 8.5 8.5 9.8 32.0 44.0 66.0 148.0 218.0 440.0 390.0
*The Cv factor is the gallons of water per minute that the valve will pass with 1 psig pressure drop.
Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
15
Ball Valves
Purge And Drain Valves 78-664-01
Bronze Ball Valve With Center Drain Center tap drain allows for winterization or purge and drain function. Features bronze body with built-in mounting pad for panel mounting or actuation. Chrome plated ball, RPTFE seats and stuffing box ring are standard, as are stainless steel lever and nut. Ideal for hydronic heating and marine applications. • Sizes 3⁄4" through 2"
Model Size Number (in.) 78-664-01 3/4 78-665-01 1 78-666-01 1-1/4 78-667-01 1-1/2 78-962-01 2
A 0.68 0.87 1.00 1.25 1.50
B 1.50 1.68 2.00 2.18 2.34
Dimensions (in.) C D E 3.00 2.12 4.87 3.37 2.25 4.87 4.00 2.62 5.50 4.37 3.05 8.00 4.68 3.24 8.00
F 0.87 0.87 0.93 0.93 0.93
G 1.37 1.37 1.50 1.50 1.50
H 0.17 0.21 0.28 0.40 0.45
Technical Information
10-24 NC ALL SIZES
95-200-01
Full-Port Solder End Stop And Waste Valve Perfect choice for hydronic and water systems where system draining is required. Replaces globe style stop and waste valves. Designed to be soft soldered into lines with no disassembly. • Rated 400 psig WOG, cold non-shock • Drain cap designed to prevent fluid loss • Adjustable packing gland
Model Number 95-203-01 95-204-01 95-205-01
Size (in.) 1/2 3/4 1
A 0.50 0.81 1.00
B 1.43 2.12 2.21
C 2.87 4.12 4.43
Dimensions (in.) D E 1.75 3.87 2.15 4.87 2.43 4.87
F 0.63 0.88 1.13
G 0.50 0.75 0.90
Technical Information
16
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
Instrumentation Valves 78-250/260
Brass And Bronze Instrumentation Ball Valves Male x Female Threaded. 400 psig WOG, Cold Non Shock. Air & Liquid Service Rating. • • • •
Micro-finish ball Blow-out-proof stem design PTFE seats Nitrile stem seal
• Plated steel tee handle • Compact design • Optional mixed end fittings available BRASS INSTRUMENTATION BALL VALVE- Tee Handle Model Size Dimensions (in.) Number (in.) A B C D E Cv* Wt. 78-260-05 1/8M X 1/8F 0.21 0.37 1.43 0.87 1.25 4.00 0.20 78-261-05 1/4M X 1/4F 0.31 0.43 1.43 0.87 1.25 5.50 0.19
78-250: Bronze
78-260: Brass
BRASS INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (in.) Number (in.) A B C D E Cv* 1/8M X 1/8F 0.21 0.37 1.43 0.75 N/A 4.00 78-262-05 78-263-05 1/4M X 1/4F 0.31 0.43 1.43 0.75 N/A 5.50
Wt. 0.20 0.19
BRONZE INSTRUMENTATION BALL VALVE - Screw Slot Model Size Dimensions (in.) Number (in.) A B C D E Cv* 1/8M X 1/4F 0.21 0.80 1.60 0.72 N/A 4.00 78-257-01 78-258-01 1/4M X 1/4F 0.31 0.80 1.60 0.72 N/A 5.50
Wt. 0.19 0.19
BRONZE INSTRUMENTATION BALL VALVE - Lever Handle Model Size Dimensions (in.) Number (in.) A B C D E Cv* 1/4M X 1/4F 0.25 0.65 1.45 0.93 1.37 5.50 78-267-01
Wt. 0.20
*The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop.
Technical Information
94 MBV
Mini Ball Valve The Mini Ball Valve is designed for steam, water, oil or gas in commercial and light industrial use. The minivalves are a competitive, conventional port, constructed of heavy-duty forged brass, 100% Teflon® seats and gland follower with double viton o-rings, to prevent stem leakage. The valves are equipped with a reversible handle for tight space applications. The valve connections are manufactured in accordance with ANSI B1.20.1. The valves are pressure rated to a maximum of 600 psig at 100°F. Rated service temperature ranges are from -40°F to 300°F. • • • • • • • • • •
Reversible Handle Rugged Forged Construction Greater Flow Rate Blow Out Proof Stem Double Viton O-rings Large Raised Wrench Flats Chrome Plated Brass Ball Each Mini is Air-Tested Twice: In the Open and Closed Position Use as a Non-leak Gauge Cock/Test Cock Perfect for O.E.M. Applications Model Number 94MBV01 94MBV02 94MBV03 94MBV04 94MBV05
Contents | Back
Customer Service 1-704-841-6000
Size (in.) 1/4 FNPT x 1/8 MNPT 1/4 FNPT x 1/4 MNPT 1/4 FNPT x 1/4 FNPT 1/8 FNPT x 1/8 MNPT 1/8 FNPT x 1/8 FNPT
Dimensions (in.) A B C 1.96 1.25 1.67 2.04 1.15 1.67 1.63 1.28 1.67 1.97 1.20 1.67 1.61 1.23 1.67
Internal Ø 0.31 0.31 0.31 0.31 0.31
Wt. (lbs.) 0.19 0.20 0.17 0.16 0.16
Prev. Page |
Next
17
Ball Valves
Irrigation Valves 78-620-01
Threaded Irrigation Valve Ideal for underground use or where drained media will not cause damage. Auto-drain feature is standard. Features a stainless steel cover, chromium-plated ball, adjustable packing gland, RPTFE seats and seals and blowout-proof stem design. • Rated 200 psig water, cold, non-shock • Temperature range: +50°F to 200°F
Model Number 78-621-01 78-622-01 78-623-01 78-624-01 78-625-01
Size (in.) 3/4 1 1-1/4 1-1/2 2
A 0.68 0.87 1.00 1.25 1.50
Dimensions (in.) B C D 1.47 2.96 2.40 1.66 3.34 2.53 1.98 3.97 3.00 2.12 4.28 3.18 2.35 4.67 3.37
E 1.81 1.81 2.50 2.50 2.50
Technical Information
78-130
Female End Valve for Underground Service The 78-130 Series is ideal for underground or below grade applications. This series (1/4" - 2" FNPT) features a square head nut welded to the stem to allow operations with a ground key from standard grade.
78-114-01
SAE Male Thread Valve for Underground Service The 78-114-01 features the same square head nut as the 78-130 Series but with an optional SAE male thread on one end. Apollo® valves can be manufactured with a variety of end connections to meet your specific underground service requirements.
18
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
Air Exhaust Valves 7K-100-01
Full-Port Safety Exhaust Valve With 1/4" NPT Tap For Drain Built for easy installation and long service life. For use on pneumatic equipment where full flow is required. Standardly furnished with a 1/4" NPT tapped drain to accommodate a muffler or to pipe the exhausted air to a safe location. For optional stainless steel latch lock handle that locks in the closed position only, specify suffix (-46). • Sizes 1⁄4 " through 2-1⁄2" • FNPT Threads • Rated 125 psig – air or water • Temperature range: +50°F to +200°F
Model Number 7K-101-01 7K-102-01 7K-103-01 7K-104-01 7K-105-01 7K-106-01 7K-107-01 7K-108-01 7K-109-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
A 0.37 0.37 0.50 0.81 1.00 1.25 1.50 2.00 2.50
B 1.03 1.03 1.10 1.56 1.80 2.12 2.37 2.70 3.25
C 2.06 2.06 2.19 3.12 3.61 4.25 4.74 5.38 6.50
D 1.75 1.75 1.75 2.12 2.62 2.87 3.30 3.71 4.05
Dimensions (in.) E F G 3.87 N/A N/A 3.87 N/A N/A 3.87 N/A N/A 4.78 0.87 1.37 5.50 0.93 1.50 5.50 0.93 1.50 7.78 2.08 3.06 7.78 2.41 3.52 7.78 2.75 3.37
H 0.09 0.09 0.12 0.29 0.31 0.37 0.50 0.62 1.09
I 0.53 0.53 0.59 0.90 1.12 1.37 1.56 2.03 2.34
J 1.18 1.18 1.25 1.56 1.78 2.03 2.21 2.68 3.00
K N/A N/A N/A 0.90 1.12 1.37 1.28 1.56 2.00
Also available in 70 & 77 Series as - 41 option (without tapped drain)
Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
19
Ball Valves
Gas/Fuel Shut-Off Valves 71-500-01
Valve With Spring Return Handle Ideal in applications where the valve must be in OFF position at all times such as feeding fuel lines. Can be used in reverse with 90° reverse stem option. Basic configuration: spring return to CLOSED. All lever components are stainless steel. • Spring return to OPEN optional • Torque nearly three times that of standard valves Model Size Number Size (in.) 1/4 71-501-01 71-502-01 3/8 71-503-01 1/2 71-504-01 3/4 71-505-01 1 71-506-01 1-1/4 71-507-01 1-1/2 71-508-01 2
A 0.43 0.50 0.50 0.68 0.87 1.00 1.25 1.50
Dimensions (in.) B C 1.12 2.25 1.12 2.25 1.12 2.25 1.50 3.00 1.68 3.37 2.00 4.00 2.18 4.37 2.34 4.68
D 7.00 7.00 7.00 7.00 7.00 9.00 9.00 9.00
Technical Information
78-256-01
Fuel Shut-Off Valve With Mounting Ears Excellent for use with liquid fuels and often specified as a fuel tank shut-off valve in marine applications. All wetted parts are brass or cast bronze. Features include mounting ears for easy, positive installation; 400 psig service rating tested to 100 psig air under water. Optional tee handle saves space and still provides fast 90˚ on/off. • NPT threaded, both ends • RPTFE seats and seals
Model Number 78-248-01 78-250-01 78-256-01 78-438-01
20
Contents | Back
Customer Service 1-704-841-6000
Size (in.)* 1/4 3/8 1/2 3/4
A 0.43 0.43 0.50 0.68
B 1.12 1.12 1.12 1.50
Dimensions (in.) C D E 2.25 1.78 3.87 2.25 1.78 3.87 2.25 1.78 3.87 3.00 2.12 4.87
F 0.93 0.93 0.93 1.06
Prev. Page |
G 1.87 1.87 1.87 2.12
Next
Ball Valves
Gas Cock Ball Valves GB-10 Series
CSA Gas Shut-off Valves Manual shut-off valves engineered specifically for low-pressure gas service. Canadian Standard Association Design and capacity certified with American-made quality. High-copper content body, chrome-plated ball, PTFE seats. Rated for temperatures from 32˚F to 125˚F at pressures of 1/2 and 5 PSIG. • Complies with CSA 3.88, ANSI Z21.15 and CR91-002 • Lever or tee handle options available
G
Model Number 51GB201 51GB301 51GB401 51GB501
Standard, yellow die-cast Zinc “wing handle.”
• Use with natural, manufactured, mixed and liquefied petroleum gases, LP gas-air mixtures • Standard die-cast zinc “wing” handle, epoxy coated, for easy shut-off Size (in.) 3/8 1/2 3/4 1
Connection 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
BTU/Hr* 318,700 623,750 1,265,000 2,037,500
* Capacity based on a gas having a heating value of 1000 Btu/cubic feet and an S.G. of 0.64 at a P.D. of 1” W.C. F B
Size (in.) 3/8 1/2 3/4 1
A D
A 2.04 2.24 2.97 3.33
B 1.06 1.18 1.55 1.81
Dimensions (In.) C D E 0.38 3.85 2.24 0.50 3.85 2.30 0.69 4.75 2.85 0.88 4.75 3.10
F 2.20 2.24 2.90 3.15
G 0.81 0.81 1.00 1.00
Optional – Stainless Steel “lever handle” E B
C
A
GB-12, GB-13, GB-14, GB-15, GB-16 Series
Gas Appliance Ball Valves These gas appliance ball valves are designed for natural gas, manufactured and mixed gas, liquefied petroleum gases and LP gas-air mixture applications. They comply with the latest editions of these published standards: • ANSI Z21.15,CGA9.1 • CSA No. 3-88 • UL Guide YRBX Model Number GB-12 GB-12 GB-12 GB-12 GB-13 GB-13 GB-13 GB-14 GB-14 UNIBODY SERIES GB-15 GB-15 GB-15 GB-16 GB-16
GB-12
• UL Guide MHKZ • UL Guide YRPV • UL Guide YSDT
Part Number 51GC2T1 51GC3T1 51GC4T1 51GC5T1 51GD2T1 51GD3T1 51GD4T1 51GE2T1 51GE3T1 51GF201 51GF301 51GF401 51GG201 51GG301
Size & End Connection (in.) 3/8 FNPT x FNPT 1/2 FNPT x FNPT 3/4 FNPT x FNPT 1 FNPT x FNPT 1/2 x 3/8 FNPT x Flare 1/2 x 1/2 FNPT x Flare 3/4 x 5/8 FNPT x Flare 3/8 x 3/8 Flare x Flare 1/2 x 1/2 Flare x Flare 3/8 FNPT x 3/8 FNPT 1/2 FNPT x 1/2 FNPT 3/4 FNPT x 3/4 FNPT 1/2 FNPT x 3/8 Flare 1/2 FNPT x 1/2 Flare
GB-13
GB-14 Contents | Back
GB-15 Customer Service 1-704-841-6000
GB-16 Prev. Page |
Next
21
Ball Valves
GB-50 & GB-50A Series
GB-50
CSA Gas Shut-off Ball Valves Designed for indoor “main burner” applications, with cast-in single or dual pilot tap for faster, simpler installation. Fully complies with CSA 3-88, ANSI Z21.15, CGA9.1, single or dual and CR91-002 standards. ASTM B584 bronze body, chrome-plated ball, brass stem, retainer and gland screws for corrosion resistance. • For natural gas, manufactured and mixed gas, liquefied petroleum gases and LP gas-air mixtures • Rated pressures of 1/2 and 5 psig • High capacity
• Comes standard with a reversible plated steel lever handle. Options include a die-cast zinc “wing” handle and “tee” handle • Standard connection is FNPT x FNPT
UL Certifications
UL Guide YSDT UL Guide YRPV UL Guide YRBX UL Guide MKHZ
ANSI Z21.15, CGA9.1 CSA 3.88 CR91-002 Number Single Tapped 50GB301 50GB401 50GB501 50GB601 50GB701 50GB801 50GB5A1 50GB6A1 50GB7A1 50GB8A1
Dual Tapped -50GB401A 50GB501A 50GB601A 50GB701A 50GB801A 50GB5A1A 50GB6A1A 50GB7A1A 50GB8A1A
Dimensions(in.) Size (in.) Tapping A B C D E F G H 1/2 1/8 0.50 1.11 2.25 1.68 3.85 2.27 1.00 0.53 3/4 1/8 0.75 1.26 2.67 1.93 3.85 2.72 1.12 0.75 1 1/8 1.00 1.65 3.42 2.19 4.78 3.18 1.53 0.94 1-1/4 1/8 1.25 1.87 3.86 2.37 4.78 3.56 1.62 1.15 1-1/2 1/8 1.50 2.05 4.22 2.81 5.40 4.21 1.81 1.31 2 1/8 2.00 2.48 5.02 3.18 5.40 4.93 2.18 1.68 1 1/4 1.00 1.65 3.42 2.19 4.78 3.18 1.53 0.94 1-1/4 1/4 1.25 1.87 3.86 2.37 4.78 3.56 1.62 1.15 1-1/2 1/4 1.50 2.05 4.22 2.81 5.40 4.21 1.81 1.31 2 1/4 2.00 2.48 5.02 3.18 5.40 4.93 2.18 1.68
I 2.24 3.06 3.24 3.62 4.36 3.06 3.24 3.62 4.36
Capacity BTU/hr. 693000 1258000 3144000 6441000 7745000 14741000 3144000 6441000 7745000 14741000
*Note: Capacities based on 1000 Btu/cubic feet gas at 0.64 specific gravity, at a P.D. of 1'' W.C.
H
E
G D
B C
GB-50A
F
G I
22
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
80-100-01
UL-Listed Gas Shut-Off Valve UL-listed and designed as safe shut-off valve for LP gas, natural gas, flammable liquids and heated oil. Optional unplated ball model meets code requirements. Features easy quarter-turn ON/OFF, a large port to reduce pressure drop and NPT connections. • RPTFE seats and seals
Model Number 80-101-01 80-102-01 80-103-01 80-104-01 80-105-01 80-106-01 80-107-01 80-108-01 80-109-01 80-100-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 0.37 0.37 0.50 0.68 0.87 1.00 1.25 1.50 2.50 2.50
Dimensions (in.) B C D 1.03 2.06 1.75 1.03 2.06 1.75 1.12 2.25 1.81 1.50 3.00 2.12 1.68 3.37 2.25 2.00 4.00 2.62 2.18 4.37 2.87 2.34 4.68 3.06 3.25 6.50 4.12 3.37 6.75 4.12
E 3.87 3.87 3.87 4.87 4.87 5.50 5.50 5.50 8.00 8.00
Technical Information
90-100-01
UL-Listed Uni-Body Threaded Ball Valve A compact valve that’s UL listed at 300 psig for fuel, inert gases and flammable liquids. Features chromium-plated ball, RPTFE seats and seals. • Blowout-proof stem design • One-piece bronze body • Optional tee handle • Reduced port Model Number 90-103-01 90-104-01 90-105-01 90-106-01 90-107-01 90-108-01
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.50 0.62 0.81 1.00 1.25
Dimensions (in.) B C D 1.14 2.15 1.68 1.36 2.61 1.75 1.50 2.90 2.00 1.81 3.50 2.18 2.06 3.79 2.62 2.43 4.42 2.81
E 3.87 3.87 4.87 4.87 5.50 5.50
Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
23
Ball Valves
Padlocking Valves 75-100-41
Padlocking Ball Valve With Automatic Drain Meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked OPEN or CLOSED with same hardware. Built with RPTFE seats and stuffing box ring, a blowout-proof stem design, adjustable packing gland and chromium-plated ball. (Also available without drain option. Specify suffix -01). • Threaded end connections • Rated to 125 psig – air or water • Temperature range: +50°F to 200°F
Model Number 75-101-41 75-102-41 75-103-41 75-104-41 75-105-41 75-106-41 75-107-41 75-108-41
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.43 0.50 0.50 0.87 0.87 1.00 1.25 1.50
Dimensions (in.) B C D 1.12 2.25 1.81 1.12 2.25 1.81 1.12 2.25 1.81 1.68 3.37 2.25 1.68 3.37 2.25 2.00 4.00 2.62 2.16 4.37 2.87 2.34 4.68 3.06
E 3.00 3.00 3.00 3.87 3.87 5.50 5.50 5.50
Technical Information
3-Piece Full-Port Valves 82-100-01
Full-Port 3-Piece Valve This in-line repairable threaded ball valve offers RPTFE seats and seals and a 600 WOG rating. SAE Grade 8 body bolts standard. • Rated 150 psig saturated steam • Adjustable packing nut
Model Number 82-101-01 82-102-01 82-103-01 82-104-01 82-105-01 82-106-01 82-107-01 82-108-01 82-109-01 82-140-01 82-14A-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
A 0.43 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00
Dimensions (in.) B C D 1.28 2.56 1.81 1.28 2.56 1.81 1.40 2.81 1.93 1.71 3.43 2.18 1.93 3.87 2.62 2.37 4.75 2.87 2.62 5.25 3.37 3.01 6.03 3.68 3.62 7.25 5.14 4.00 8.00 6.77 5.50 11.00 8.26
E 3.87 3.87 4.87 4.87 5.50 5.50 8.00 8.00 9.75 18.00 18.00
Technical Information
24
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
82-100-19
Full-Port 3-Piece Valve With Locking Plate Threaded valve features a 3-piece design that makes in-line repairs easy. Meets OSHA lock-out standards. It’s equipped with RPTFE seats. Two bolts are steel, two are stainless steel. (Option -19 not available on 2-1/2" size). • Rated 150 psig for saturated steam • 600 psig WOG cold, non-shock
82-140-57
Full-Port 3-Piece Valve With 316 Stainless Steel Ball/Stem Cleaned for gaseous oxygen, valve is equipped with NPT connections and features RPTFE seats and seals, blowout-proof stem design and adjustable packing gland. • Rated 600 psig cold, non-shock • 150 psig for saturated steam
82-100-63
Full-Port 3-Piece Valve With NPT x Solder Ends Built to make in-line repairs fast and simple, this valve features RPTFE seats and seals and a 600 WOG rating. It’s equipped with SAE Grade 8 body bolts. • Full-Port flow advantages • Adjustable packing gland
82-200-01
Full-Port 3-Piece Solder End Valve Valve features full-port and is easily repaired in-line. Designed for soft soldering or brazed installation. Includes RPTFE seats and seals. • Chromium-plated ball • Equipped with SAE Grade 8 body bolts
Model Number 82-202-01 82-203-01 82-204-01 82-205-01 82-206-01 82-207-01 82-208-01 82-209-01 82-240-01 82-24A-01
Contents | Back
Customer Service 1-704-841-6000
Size* (in.) 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Technical Information
A 0.50 0.62 0.81 1.00 1.25 1.50 2.00 2.50 3.00 4.00
B 1.28 1.40 1.71 1.93 2.37 2.60 3.01 3.62 4.00 5.50
Dimensions (in.) C D E 2.56 1.81 3.87 2.81 1.93 4.87 3.43 2.18 4.87 3.87 2.62 5.50 4.75 2.87 5.50 5.25 3.37 8.00 6.03 3.68 8.00 7.25 5.14 9.38 8.00 6.77 18.00 11.00 8.26 18.00
F 0.50 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13 4.13
Prev. Page |
G 0.37 0.50 0.75 0.90 0.96 1.09 1.34 1.47 1.66 2.16
Next
25
Ball Valves
“Safe” Solder Valves (Three Piece) 82-200/82-240
3-Piece Full-Port Valve With Brazed Tubing Also available: with nominal 6” type K tubing brazed into the solder end cup – cleaned for oxygen service (option suffix -57). This valve is useful in pharmaceutical, medical gas and pneumatic applications where valves should not be disassembled prior to soldering or brazing. Standard Model Model Numbers Numbers 316 Ball & Stem 82-203-B8 82-243-A8 82-204-A8 82-244-B3 82-205-B7 82-245-B1 82-206-B7 82-246-B0 82-207-B2 82-247-B2 82-208-B7 82-248-B2
Oxygen Cleaned Model Model Numbers Numbers 316 Ball & Stem 82-203-A1 82-243-A7 82-204-A2 82-244-B2 82-205-A1 82-245-B0 82-206-A1 82-246-A9 82-207-A1 82-247-B0 82-208-A1 82-248-B1
Dimensions (in.) Size (in.) A*(in.) B C 1/2 5/8 0.62 0.05 3/4 0.87 0.81 0.07 1 1.12 1.00 0.07 1-1/4 1.37 1.25 0.07 1-1/2 1.62 1.50 0.07 2 2.12 2.00 0.08
D 13.81 13.93 14.04 14.81 15.07 15.23
E 2.00 2.18 2.62 2.87 3.37 3.70
F 4.87 4.87 5.50 5.50 8.00 8.00
G 6.00 6.00 6.00 6.00 6.00 6.00
*
Nominal Tubing O.D.
Technical Information
General Purpose Uni-body Valves 9A-100-01
Heavy Pattern Uni-Body Threaded Ball Valve One-piece bronze valve eliminates leak paths. Features static grounding devices and adjustable packing gland. Lever handle standard. • Rated 600 psig WOG • Blowout-proof stem design
Model Number 9A-101-01 9A-102-01 9A-103-01 9A-104-01 9A-105-01 9A-106-01 9A-107-01 9A-108-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.37 0.50 0.62 0.81 1.00 1.25
Dimensions (in.) B C D 1.34 2.59 1.68 1.34 2.59 1.68 1.34 2.59 1.81 1.44 2.84 1.84 1.72 3.28 2.00 1.94 3.84 2.18 2.06 4.00 2.68 2.29 4.56 2.87
E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50
Technical Information
26
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves 91-100-01
Threaded Uni-Body Ball Valve A compact valve featuring a chromium-plated ball, adjustable packing gland, blowout-proof stem design and RPTFE seats and seals. Lever handle standard, tee handle optional. • 400 psig WOG cold non-shock • 150 psig saturated steam
Technical Information
Model Number 91-101-01 91-102-01 91-103-01 91-104-01 91-105-01 91-106-01 91-107-01 91-108-01
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
A 0.37 0.37 0.37 0.50 0.62 0.81 1.00 1.25
Dimensions (in.) B C D 1.14 2.15 1.68 1.14 2.15 1.68 1.14 2.15 1.68 1.36 2.61 1.75 1.50 2.90 2.00 1.81 3.50 2.18 2.06 3.79 2.62 2.43 4.42 2.81
E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50
Specialty Valves Dual Wye Auto Drain Ball Valve Dual action modular valve, ideal for compressor applications where safety exhaust may be needed for two air lines at once.
3-Way, 4-Seated Ball Valve with Flanged Pump Connections This special valve can be used in hydronic geothermal or other HVAC applications where diversion of flow is required, along with positive shut-off. Designed to connect directly to circulator pump flange connections.
78-100-01
Cap And Chain Valve With 3/4 Inch Hose Connection New! Heavy Brass Cap and Reverse Handle. Available Fourth Quarter 2003! Ideally suited for direct connections to hoses, valve features a securely attached cover with chain which prevents damage to hose threads. -200 model designed for soft soldering into lines without disassembly. Features chromium-plated ball, blowout-proof stem design and RPTFE seats and stuffing box ring. • Adjustable packing gland • New pressure-containing version available • New reverse handle standard for easier installation
Model Number 78-103-01 78-104-01 78-165-01 78-203-01 78-204-01 78-195-01
Size (in.) 1/2 NPT x 3/4 Hose 3/4 NPT x 3/4 Hose 1 NPT x 3/4 Hose 1/2 Solder x 3/4 Hose 3/4 Solder x 3/4 Hose 1 Solder x 3/4 Hose
A 0.50 0.68 0.87 0.50 0.68 0.87
Dimensions (in.) B C D E 1.68 2.81 2.97 3.87 1.96 3.50 3.67 4.87 2.24 3.92 4.16 5.28 1.68 3.14 3.28 3.89 1.96 3.94 4.09 4.89 2.24 4.49 4.73 5.28
F 1.75 2.12 2.43 1.75 2.12 2.43
Technical Information
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
27
Ball Valves
Cast Iron Ball Valves “The Gate Valve Alternative” IBV-125 Series
Apollo® International Cast Iron Full-Port Class 125 Flanged Ball Valves The Conbraco IBV-125 Series cast iron ball valve meets MSS SP-72, ANSI B16.10 and federal WW-V-35 performance standards. They can be used to replace any IBBM gate valve or plug valve. With their Full-Port design, these valves assure an unobstructed, turbulence-free flow that gate and butterfly valves can’t match. Low profile handle for easy installation in tight areas. Sizes from 2" to 10". Rated 125 WSP, 200 WOG, with a maximum operating temperature of 350˚F. • Gear operator standard 8" and 10" • Full-port design offers superior flow rate • No bronze seat rings, disc rings or stems to wear out • Quarter-turn offers instant, positive shut-off with zero leakage • Stainless steel ball resists corrosion • Handle indicates valve operation status
IBVE-125 Series
• • • • • •
Large actuator mounting pad standard Optional locking handles available Blowout-proof stainless steel stem PTFE seats and packing, not Nitrile or EPDM Opens and closes easily, without cheater bar For more technical information, request #PHBRIRBV brochure
Apollo International Epoxy Coated Cast Iron Full-Port Class 125 Flanged Ball Valve BVE-125 Series valves have all the design and construction features of the IBV-125 plus an FDA-approved, heat-fused epoxy coating making them ideal for corrosive water service as well as food contact applications. Maximum operating temperature: 140˚F. • For additional technical information, request #PHBRIRBV brochure
C
D
B
A
IBVD-125 Series
Apollo International Ductile Iron Full-Port Class 125 Flanged Ball Valve IBVD-125 series valves have the same design and construction features of the IBV-125 series but in ductile iron. Same dimensional data as IBV/IBVE series. Available in sizes 2" through 6".
Dimensions (in.) IBV Model Number 6P-208-01 6P-209-01 6P-200-01 6P-20A-01 6P-20C-01 6P-20E-01 6P-20G-01
IBVE Model Number 6Q-208-01 6Q-209-01 6Q-200-01 6Q-20A-01 6Q-20C-01 6Q-20E-01 -
IBVD Model Number 6R-208-01 6R-209-01 6R-200-01 6R-20A-01 6R-20C-01 -
Size (in.) 2 2-1/2 3 4 6 8* 10*
A 7.00 7.50 8.00 9.00 10.50 11.50 13.00
B 6.00 7.00 7.50 9.00 11.00 13.50 16.00
C 9.00 16.00 16.00 19.70 26.00 -
D 3.00 3.70 4.00 4.80 7.20 9.24 11.81
Wt./100 (lbs.) 22.0 34.0 38.0 58.0 118.0 345.0 440.0
* with manual gear operator
28
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Ball Valves
International Economy Valves 64 Series
Apollo® International Full-Port Brass Ball Valves Economy full-port forged ball valve with maximum flow; ideal choice for all plumbing applications. Lever handle is standard on all sizes. • Sizes from 1/4" to 4" • Threaded (-100) and solder end (-200) connections • Pressure rated to 600 psig WOG; 150 psig steam
• • • • •
Temperatures to 366˚F (185˚C) Blowout-proof stem Chrome-plated brass ball Secondary O-ring stem seal PTFE seats, thrust bearing and stem packing
64-100 Model Number Size (in.) 64-101-01 1/4 NPT 64-102-01 3/8 NPT 64-103-01 1/2 NPT 64-104-01 3/4 NPT 64-105-01 1 NPT 64-106-01 1-1/4 NPT 64-107-01 1-1/2 NPT 64-108-01 2 NPT 64-109-01 2-1/2 NPT 64-100-01 3 NPT 64-10A-01 4 NPT
A 0.39 0.39 0.59 0.78 0.98 1.25 1.57 1.96 2.56 3.15 3.94
Dimensions (in.) B 2.02 2.02 2.44 2.71 3.07 3.42 3.89 4.33 5.59 6.45 7.60
C 1.75 1.75 1.88 2.28 2.44 3.07 3.34 3.79 5.02 5.45 6.34
D 3.85 3.85 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23
Cv 6 7 19 34 50 104 268 309 629 1018 1622
64-200 Model Number 64-203-01 64-204-01 64-205-01 64-206-01 64-207-01 64-208-01 64-209-01 64-200-01 64-20A-01
A 0.59 0.78 0.98 1.25 1.57 1.96 2.56 3.15 4.13
Dimensions (in.) B 2.53 2.99 3.58 4.09 4.56 5.43 6.93 8.09 10.25
C 1.88 2.28 2.44 3.07 3.34 3.79 5.02 5.45 6.34
D 3.85 4.80 4.80 6.02 6.02 6.37 8.07 8.07 10.23
Cv" 19 34 50 104 268 309 629 1018 1622
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 Optional Kits Valve Size (in.) 1/4, 3/8 and 1/2 3/4 and 1 1-1/4 and 1-1/2 2 2-1/2 and 3 4
Stem Extensions 78-1501-01 78-1502-01 78-1503-01 78-1504-01 78-1505-01 -
Balancing Stops 78-1506-01 78-1507-01 78-1508-01 78-1509-01 78-1510-01 -
Locking Handles 78-1659-01 78-1660-01 78-1661-01 78-1662-01 -
Lever Handles 78-1646-01* 78-1647-01 78-1648-01 78-1649-01 78-1650-01 78-1651-01
Note: Specify -07 suffix for “T” handle, ie. 64-105-07. Available with threaded models only in 1/4”-1” sizes. * Lever handle available on 1/2" - 4".
95A Series
Apollo International Full-Port Brass Ball Valve With Stop & Waste
Threaded 95A-303-01 95A-304-01 95A-305-01
Contents | Back
Customer Service 1-704-841-6000
Sweat 95A-403-01 95A-404-01 95A-405-01
Size (in.) 1/2 3/4 1
Prev. Page |
Next
29
Ball Valves
Numbering System XX-XXX-XX Series 32 50 51 64 70 71 71AR 77 77AR 78 79 7B 7K 7M 80 81 82 90 91 95 95A 9A
Configuration Bronze Ball Valve, Regular-Port Bronze Gas Valve, AGA & UL Listed Bronze Gas Valve, AGA Brass Ball Valve, Full-Port, International Bronze Bronze with Pads Bronze, Actuator-Ready Bronze Full-Port Full-Port Bronze, Actuator-Ready Specialty Valves Refrigerant Valves Bronze, Full-Port, Hydro Bronze, with Drain Bronze, Full-Port, with Drain Bronze, UL Listed Bronze, UL Listed, Plain Ball Bronze 3-Piece Full-Port Bronze, Unibody, UL Listed - Saturn® Bronze, Unibody - Saturn® Bronze, Stop & Drain Brass Ball Valve, Full-Port, International Bronze, Unibody, Heavy Pattern - Saturn®
*BODY SIZE WHEN ENDS ARE MIXED.
NOTE:
NOT ALL VARIATIONS AND FEATURES ARE AVAILABLE ON SAME VALVE. CONSULT CONBRACO REPRESENTATIVE.
ALL MANUFACTURING FACILITIES REGISTERED TO ISO 9001 STANDARDS.
Apollo & Saturn Valves: 1 2 3 4 5 6 7 8 9
FNPT Solder Union End NPT Union End Solder Spring Return 3-Way NPT Full-Port Refrigeration Valves Male X FNPT 3-Way Solder
Apollo 3-Piece Valves 1 2
Size* 1 2 3 4 5 6 7 8 9 0 A
1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
FNPT Solder
Variations 1 2 3 4 5 7 8 9
One Size Larger Male Retainer Adjustable Stop Lever Ni-Cu Ball & Stem Stainless Steel Ball & Stem Original Balancing Stop One Size Smaller Female Retainer (Not Assigned) Pinned Retainer
Numbering System OPTIONS -01 -02 -03 -04 -05 -07 -08 -09 -10 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -23 -24 -27 -30 -31 -32 -35
Standard Stem Grounded 1-1/4" Carbon Steel Stem extension 2-1/4" Carbon Steel Stem extension Plain Ball Steel Tee Handle 90˚ Reversed Stem Stainless Steel Lever Stainless Steel Lever & Nut Stamped “157 SWP” & Bagged Stamped “157 SWP” Side Vented Ball (uni-directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Plain Yellow Grip Lock Plate Slot Vented Ball (bi-directional) - Bronze Valves UHMWPE Trim (non-PTFE) Tank Flange (2" 3-Piece valves only) Graphite Packing Stainless Steel Latch-Lock Lever & Nut Cam-Lock and Grounded 7B Series w/Boss NOT Drilled/Tapped Stainless Steel Tee Handle & Nut VTFE Trim
-36 -39 -40 -41 -45 -46 -47 -48 -49 -50 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -68 -72 -97 -98 -BC
Stainless Steel Hi-Rise Round Handle, Stainless Steel Nut SS Hi-rise Locking Wheel Handle, SS Nut Cyl-Loc and Grounded Automatic Drain Less Lever and Nut Latch-Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4” Carbon Steel Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem Grounded Ball & Stem, Assembled Dry Body Center Section NPT x Solder 250# Steam Trim Multifill Seats & Graphite Packing 4” Stem Extension (3” & 4” 3-pc 82 Series) RTFE Packing Grnd. Whl. Handle, Pinned or Tack Welded Grnd. Whl. Pinned or Tack Welded & 1-1/4 Stem Ext. Ball Check
*Not all options and combinations available on all sizes and series. Consult a Conbraco Representative.
30
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Butterfly Valves
Butterfly Valves 141/143 Series
General Purpose/Economy Butterfly Valves Apollo® 141/143 Series valves form a lineup of economical butterfly valves ideal for use in industrial and HVAC/mechanical markets. 141 Series is a wafer style valve (2" - 24"); 143 Series is a companion lug (2" - 24"). Both are rated at 200 PSI (2''-12'') and 150 PSI (14''-24'') bubble-tight shut-off between flanges. These valves are designed for reliable performance in hot and cold water applications, treated or untreated, on-off or throttling, control isolation, flow balance or diversion tasks. Valves are 100 percent factory tested in both operational directions. They feature an extended neck length to provide a minimum 2” clearance between valve top plate and pipe flange. 141/143 Series meet MSS SP-67 and API 609 specifications. All 143 series valves are equipped with retainer screws for dead-end service at full rated pressure. Available with three disc materials: Nickel-Plated Ductile Iron, Aluminum Bronze and Stainless Steel. Available with two seat materials: EPDM and Buna-N.
Across Parallel Flats
Across Parallel Flats
Size (in.) 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24
Size (in.) 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24 WEIGHTS Size (in.) 2 2-1/2 3 4 5 6 8
Contents | Back
A 3.25 3.75 4.00 4.87 5.37 5.87 7.12 8.25 9.75 11.00 12.00 14.37 14.62 18.00
B 6.27 6.87 7.12 7.87 8.37 8.87 10.25 11.50 13.25 14.50 15.75 16.62 18.87 22.12
C 1.25 1.25 1.25 1.25 1.25 1.25 1.75 1.87 1.87 1.87 2.00 2.00 2.50 2.75
Dimensions (in.) D E F 1.75 0.394 0.496 1.87 0.394 0.496 1.87 0.394 0.496 2.12 0.472 0.621 2.25 0.551 0.745 2.25 0.551 0.745 2.50 0.669 0.870 2.75 0.866 1.120 3.12 0.945 1.244 3.12 0.945 1.244 3.50 1.313 4.25 1.500 5.25 1.625 6.12 2.000
H2 ------4.015 4.015 -------
Dimension (in.) I J 3.54 4.00 3.54 4.75 3.54 5.12 3.54 6.75 3.54 7.75 3.54 8.62 5.91 10.56 5.91 13.06 5.91 16.00 5.91 17.12 5.91 20.00 8.27 21.37 8.27 23.31 8.27 27.87
141 Model 6 8 9 11 15 18 32
143 Model 9 10 11 18 22 26 43
H 2.756 2.756 2.756 2.756 2.756 2.756 4.921 4.921 4.921 4.921 4.921 6.496 6.496 6.496
Customer Service 1-704-841-6000
L (141) 0.687 0.687 0.687 0.687 0.812 0.8125 0.8125 0.9375 0.9375 1.0630 1.0630 1.2500 1.2500 1.3750 WEIGHTS Size (in.) 10 12 14 16 18 20 24
G 0.375 0.375 0.375 0.375 0.375 0.375 0.563 0.563 0.563 0.563 0.563 0.813 0.813 0.813
G2 ------0.438 0.438 -------
Key ----------0.313 SQ 0.375 SQ 0.375 SQ 0.500 SQ
Tapped Lug Data (143) K #Holes Tap UNC. 4.75 4 0.625-11 5.50 4 0.625-11 6.00 4 0.625-11 7.50 8 0.625-11 8.50 8 0.750-10 9.50 8 0.750-10 11.75 8 0.750-10 14.25 12 0.875-9 17.00 12 0.875-9 18.75 12 1.000-8 21.25 16 1.000-8 22.75 16 1.125-7 25.00 20 1.125-7 29.50 20 1.250-7
141 Model 47 70 90 142 176 251 405
Prev. Page |
143 Model 66 102 148 206 277 410 592 Next
31
Automation
Automation Products Actuators and Manual Operators
Apollo® CompacTorque™ Pneumatic Actuators Overview Apollo® CompacTorque™ actuators are the most advanced rack and pinion actuators on the market today. From corrosion protection to versatility in application, these actuators offer you the ultimate in design and selection.Their outstanding design starts with hard anodized aluminum construction, in your choice of polyester powder coatings, 316L stainless steel pigmented polyester electrostatic coating or electroless nickel coating. This range of materials assures you the maximum in corrosion protection at an affordable cost. Our unique Universal Shaft Adapter (USA) makes direct mounting to your favorite butterfly valve easier than ever. The precision replaceable inserts feature variable internal geometry to meet any custom requirements. The standard insert material is high-strength FLNC-4408. Optional stainless steel inserts are available.CompacTorque™ actuators are available in spring return or double-acting units which convert easily in the field to a spring return design by simply adding the correct number of pre-loaded springs to the standard housing. Specially designed spring cartridges make our spring return actuators inherently safe. Other standard features include internal and external travel stop adjustments, high temperature, low coefficient of friction body bearings to absorb the side thrust of the pistons, internal piston guides and high temperature, low friction piston bearings. The actuators’ internal porting reduces the cost of external tubing which can be easily damaged. All top mounting dimensions for accessory mounting and pneumatic supply ports conform to the latest NAMUR specifications. Actuators can be direct mounted to 1-1/2” to 24” Apollo valves. The standard spring cartridge system is designed to operate on 40, 60, 80, 100 and 120 PSI service.
Ordering Number 3TX-XXX-XX-X
• External end of travel adjustments integral with the end caps • Mechanical visual position indicator and the pinion is designed to allow manual override by simply removing the position indicator • One piece output pinion manufactured of high strength steel and electroless nickel coated for corrosion protection • NAMUR slotted connection • Replaceable splined adapter to accommodate custom shaft connections • Pistons and pinion that have a Nylon 4-6 bearing pad and rings, which extends the life of the actuator and reduces friction • Corrosion resistant polyester powder coated end caps • Hard anodized aluminum housing • All fasteners are high strength stainless steel • Permanently lubricated nitrile seals • Self-contained spring cartridges, heat treated and polyester powder coated for corrosion protection, that ensure safe disassembly
D - Double Acting S - Spring Return K - Kit
32
Contents | Back
0 - Std. (Protection A) 123456-
ENC(Protection C) Seal Kit Spring Kit Indicator Kit Stop Kit Polyester Powder Coated (Protection B)*** 7 - Stainless Steel Epoxy Coated (Protection D) 8 - Stainless Steel Epoxy Coated 316 SS Pinion (Protection E) G - Red Caps (Protection A) H - Blue End Caps (Protection A) J - Black End Caps (Protection A)
Size 1 2 3 4 5 6 65 7 8 9 A
Option 0 - Nitrile (Std.) 0˚F to +250˚F 1 - Viton 32˚F to +350˚F 2 - Low Temp. Nitrile -50˚F to +250˚F 3 - Neoprene
Customer Service 1-704-841-6000
Spring Set 0 2 3 4 5 6
Less One Spring Imbalance
Rev. Level A - Standard B - Without Universal Shaft Adapter* M - Metric*
0 3 4 5 6
* Select one USA (Universal Shaft Adapter) from selection chart ** Select one USA, specify bolt pattern on bottom of Actuator *** Specify if Polyester coating is Yellow, Red, Blue or Black
Prev. Page |
Next
Automation
Automation Products AE Series
Apollo® AE Series Electric Actuators Ruggedly built and designed for easy installation, new Apollo® AE Series electric actuators deliver the most standard features and performance in their class – for a surprisingly low price. Five output torques, one housing 200, 400, 600, 800 and 1,000 inch-pounds.
Ordering Number AE XXX X XXX
• Long Service Life • Newly developed anodized die cast aluminum housing • Fiberglass reinforced nylon cover with UV stabilizers resists corrosion • Nitrile gasket and seals cover all penetration points in housing and cover • Precision cut and heat treated alloy spur gears • Permanently lubricated enclosed gear train • Stainless steel push-and-turn manual override shaft, position indicator shaft and female output • ISO 5211 F07 drive output reduces inventory of mounting kits
Voltage Output Torque (lbs. in.) 200 400 600 800 1000
Contents | Back
1 - 115 VAC 2 - 24 VAC* 3 - 220 VAC 4 - 12 VDC 5 - 24 VDC *24 VAC not CSA listed at this time
Customer Service 1-704-841-6000
• 115 AC, 220 AC and 24 AC -- all AC models feature a 25% duty cycle below 100˚F • 12 and 24 DC -- all DC voltage models provide 100% duty cycle • Operates from -40˚F (when equipped with heater and thermostat) to 150˚F • Actuators can be ordered with one, two or three additional limit switches • For low temperatures: actuators can be equipped with a thermostatically controlled heater element • Motor brake is necessary when mounting actuator to a butterfly valve
Options 0 - None B - Two extra switches and cams C - Three extra switches and cams D - Heater and thermometer E - Single potentiometer F - Motor brake (for butterfly valve) 115 VAC & 24 VAC only
Prev. Page |
Next
33
Automation
Accessory Products
Valve Position Monitor Here’s the ultimate in valve monitoring: Westlock and Stonel position monitors feature a high visibility, color-coded indicator to display valve position. All Westlock and Stonel monitors are designed to correspond to the latest NAMUR standard for actuator/position monitoring units. Plated steel or stainless steel mounting kits are available to provide a pre-engineered mounting solution for maximizing position monitor performance and direct mounting to actuators. Other brands also available such as Moniteur, pictured here. See our Actuator Catalog for details.
Solenoids Apollo® CompacTorque™ actuators can be supplied with solenoids manufactured by either AVC (Automatic Valve Company) or ASCO. Our 3/4 way, field convertible, direct mount (NAMUR pattern) solenoid valves feature a variety of interchangeable integrated molded coils. They’re compatible with both spring return and double acting actuators.
Positioners Apollo valve positioners are excellent tools for increasing the gain of your valve package, often reducing your actuator size due to your increased ability to accurately control higher air deliveries, and the flexibility to add options and accessories to complete your control package’s performance. Their simple design makes PMV positioners (shown here) easy to understand, calibrate and repair. Rugged construction provides operation in a variety of tough applications. Compact size minimizes space requirements. A complete package means the user can select the right positioner for his application. A bright indicator makes it easy for operators to visually check the valve position. Spool valve design requires very little maintenance. The electro-pneumatic unit eliminates the need for an extra product and additional connections. PMV positioners are proven products recognized for providing years of reliable service. Other brands are also available from your Apollo distributor. Apollo offers both pneumatic and electro-pneumatic positioners as standard. Pneumatic positioners may be used on either double acting or spring return actuators. The anodized aluminum housing provides excellent product integrity and good corrosion resistance. Options include special coatings, stainless steel housings and a variety of accessory items which can help you meet your most demanding control applications. See our Actuator Catalog for complete details.
34
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing and Heating
Pressure Relief Valves
16 Series
Pressure Relief Valves Pressure relief valves relieve excess pressure in cold water storage tanks and water supply lines. • Bronze body • 16-300 Series for temperature relief with 210°F • Standard pressure settings from 50 to 175 psig fusible plug and pressure relief with lift lever, • Stainless steel spring nitrile seat • 16-200 Series for pressure relief only, • 16-400 Series for temperature relief with 210°F less lever, silicone seat fusible plug and pressure relief, less lever, nitrile seat Model Number 16-202 16-302
B
Size (in.) 1/2 M x 1/2 F 1/2 M x 1/2 F
Wt./100 (lbs.) 33.0 37.5
A 1.41 1.41
Dimensions (in.) B C 2.12 1.00 2.50 1.00
D 0.50 0.87
Note: When ordering, specify pressure by adding the two digit suffix after the product number, i.e.: 50 PSIG: -01; 75 PSIG: -02; 100 PSIG: -03; 125 PSIG: -04; 150 PSIG: -05; 175 PSIG: -06
A
C D 16-200
16-501 Series
16-300
By-Pass Relief Valves Protects equipment by allowing excess volume to be discharged to storage tank or back to the source. Ideal for agricultural sprayers and simple process systems. “T” handle facilitates adjustment. • 1/2" size for low volume relief or by-pass control • Adjustable pressure setting Model Number 16-501-01 16-501-02 16-501-25 16-501-60
16-ARV Series
Size (in.) 1/2 M x 1/2 F 1/2 M x 1/2 F 1/2 M x 1/2 F 1/2 M x 1/2 F
Wt./100 (lbs.) 0.62 0.61 0.62 0.61
Seat Material Nitrile Nitrile PTFE PTFE
Relief Range 0 - 250 250 - 600 0 - 250 300 - 600
Calibrated Pressure Relief Valves Calibrated valves for easy pressure adjustments without a gauge. Factory preset at 100 psig; accommodates pressures from 50 to 175 psig, marked in 25 psi increments. • For cold water applications • Inlet sizes: 1/2" or 3/4" NPT, both with 1/2" NPT outlet Model Number 16-503-01 1/2 ARV 16-504-01 3/4 ARV
Contents | Back
Customer Service 1-704-841-6000
• Cast bronze body, brass disc and cap • Stainless steel spring • Silicone rubber seat and EPDM rubber cap seal
Size (in.) 1/2 M x 1/2 F
Wt./100 (lbs.) 37
A 1.28
3/4 M x 1/2 F
38
1.28
Dimensions (in.) B C 3.44 1.00 3.44
1.00
Prev. Page |
D 0.56 0.56
Next
35
Plumbing and Heating
Section IV ASME Hot Water Relief Valves
18 Series
Water Heater T&P Relief Valves Automatic temperature and pressure relief valves feature unique non-metallic coating which protects the element against galvanic and electromechanical corrosion by isolating it from the heated water. This coating is electrostatically applied for uniform coverage, then thermobonded, resulting in optimum adhesion for extended service life. CSA design certified at all settings to ANSI Z21.22. ASME Section IV rated at 125 psig and 150 psig settings for 3/4 NPT only. • Meets HUD/FHA requirements • Cast bronze body, stainless steel spring • Rated 210°F maximum
Model Number 18-401 18-401 18-401 18-402 18-402 18-402
• CRN #0G2663.1C registered in all Canadian provinces and territories • ASME capacity certified to 450,000 BTU/hr.
Size (in.) 1/2 M x 1/2 F 1/2 M x 1/2 F 1/2 M x 1/2 F 3/4 M x 3/4 F 3/4 M x 3/4 F 3/4 M x 3/4 F
SUFFIX KEY Pressure PSIG 75 100 125 150 175
Element Length (in.) 1.00 4.00 8.00 1.00 4.00 8.00
1" -04 -11 -27 -28 -38
Wt./100 (lbs.) 64.0 64.0 64.0 64.4 64.4 64.4
Coated Element Length 4" -05 -12 -29 -30 -24
CSA Capacity rating BTU/HR. 15,000 15,000 15,000 80,000 100,000 100,000
8" -07 -14 -36 -37 -41
Temperature and Pressure Relief Valves 18-402X Series
Extended Shank Water Heater T&P Relief Valves Relief valves with an extended body length (2") for protection of water heaters with extra insulation. Unique nonmetallic coating resists galvanic and electromechanical corrosion. CSA design certified at all settings. ASME Section IV rated at 125 psig and 150 psig settings. • • • •
Meets HUD/FHA requirements Cast bronze body, stainless steel spring Rated to 210°F maximum ASME capacity certified to 450,000 BTU/hr.
Model Number 18-402X-02 18-402X-15 18-402X-39 18-402X-38 18-402X-40
36
Contents | Back
• Zinc-plated lever standard • CRN #0G2663.1C registered in all Canadian provinces and territories
Element Size (in.) Length (in.) 3/4 M x 3/4 F 3 3/4 M x 3/4 F 3 3/4 M x 3/4 F 3 3/4 M x 3/4 F 3 3/4 M x 3/4 F 3
Customer Service 1-704-841-6000
Wt./100 (lbs.) 64.4 64.4 64.4 64.4 64.4
Pressure PSIG 75 100 125 150 175
CSA Capacity Rating BTU/HR. 100,000 100,000 100,000 100,000 100,000
Prev. Page |
Next
Plumbing and Heating
18-500 Series
Corrosion Resistant Commercial T&P Valves Diaphragm type high capacity CSA design certified; ASME Section IV certified to 150 psig; ANSI Z21.22 certified to 150 psig. Corrosion resistant with all bronze body and screw-in cage. Eliminates rusting steel screws. Stainless steel springs and thermostats. • Available in set pressures of 75, 100, 125 and 150 psig • The 3/4'' valve can be supplied with 3'', 5'' or 8'' thermostats
• Valves 1'' and larger available with 4” and 8” thermostats • 3'' element is CSA capacity certified at 185,000 BTU/HR. • CRN #0G2663.1C registered in all Canadian provinces and territories
A Model Number 18-511 18-512 18-521 18-522 18-531 18-532 18-541 18-542 18-551 18-552
B
C
Connection (in.) 3/4M x 3/4F 3/4F x 3/4F 1M x 1F 1F x 1F 1-1/4 M x 1-1/4 F 1-1/4 F x 1-1/4 F 1-1/2M x 1-1/2F 1-1/2F x 1-1/2F 2M x 2F 2F x 2F
Dimensions (in.) A B C 4.67 1.85 1.38 4.67 1.85 1.38 6.63 2.32 1.93 6.63 2.32 1.93 6.63 2.32 1.93 6.63 2.32 1.93 9.69 3.34 2.50 9.69 3.34 2.50 9.69 3.34 2.63 9.69 3.34 2.63
Wt./100 (lbs.) 106.7 106.7 287.3 284.1 337.2 322.4 819.6 841.7 860.1 874.1
CSA Cap. Rating BTU/HR. 205000 205000 765000 765000 850000 850000 1300000 1300000 1400000 1400000
*ASME Rating BTU/HR. 1601000 1601000 4200000 4200000 4586000 4586000 7763000 7763000 9262000 9262000
* National Board certified capacity at 150 PSIG per ASME Section IV-Heating Boilers; specify number, thermostat length and set pressure when ordering. EX: 18-511-3-150
Section IV ASME Low Pressure Steam Safety Valves Low Pressure Steam Heating Boiler Safety Valves
12-200 Series
Use on medium and large commercial and industrial steam heating and processing boilers. National Board capacity certified at 15 psig; PTFE coated O-Ring seat seal.
A
• All bronze construction • 3/8" NPT side tapping for drain • Top guide, rust-proof steel spring
B
D
C
Model Number 12-205 12-206 12-208
Size(in.) Inlet Outlet NPT NPT 2 2 2-1/2 2-1/2 3 3
• High capacity • Registered in all Canadian provinces and territories, CRN #0G2663.1C
Max. Pressure Capacity* Wt./100 PSIG lbs./hr. (lbs.) 15 2500 514 15 3529 835 15 4100 1162
A 0.60 8.50 9.50
Dimensions (in.) B C D 3.75 2.62 4.00 5.25 3.06 4.00 6.00 3.75 4.00
Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 5 psig - 03; 6 psig - 04; 8 psig - 05; 10 psig - 06; 12 psig - 07; 15 psig - 08 *National Board Capacity Certified-(90% of actual capacity at 33% accumulation.)
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
37
Plumbing and Heating
Low Pressure Steam Heating Boiler Safety Valves
13 Series
National Board capacity-certified at 15 psig in accordance with ASME Section IV; rough or polished chrome finish; positive drainage of condensate from seat area. • Flat seat, PTFE faced disc for positive seal • Standard set pressure of 15 psig; capacities apply to valves set @ 15 psig
• No. 13-101 is top outlet discharge • Registered in all Canadian provinces and territories, CRN #0G2663.1C
A Model Number 13-101 13-211 13-202 13-213 13-214 13-511 13-512
C
B
13-101
B
Size(in.) Inlet Outlet NPT NPT 3/4 M Top 3/4 M 3/4 F 1M 1F 1-1/4 M 1-1/2 F 1-1/2 M 2F 3/4 M 3/4 F 3/4 F 3/4 F
Max. Pressure PSIG 15 15 15 15 15 15 15
Capacity* lbs./Hr. 410 475 643 1200 1900 407 407
Wt./100 (lbs.) 64 107 110 218 320 62 59
A 2.87 1.81 2.06 2.53 3.00 1.69 1.81
Dimensions (in.) B C 0.94 1.250 3.69 1.437 3.87 1.218 4.50 1.875 5.25 2.187 3.25 1.187 2.75 1.187
D – 1.41 1.41 1.50 1.81 1.25 1.25
*National Board Capacity Certified at 15 psig. (90% of actual capacity at 33% accumulation.) Use key to designate last two digits of model number. Last two digits indicate pressure and finish.
SUFFIX KEY Pressure PSIG 5 6 8 10 12 15
A
C
D
13-200
Plain Brass -03 -04 -05 -06 -07 -08
Satin Chrome -35 -36 -37 -38 -39 -40
Polished Chrome -43 -44 -45 -46 -47 -48
B A
C
D
13-511
High Capacity Low Pressure Steam Boiler Safety Valves
14-200 Series
National Board capacity-certified in accordance with ASME Section IV at 15 psig. For commercial and industrial boilers. Capacities up to 6843 lbs./hr. • Nozzle-type chrome-plated brass disc • Test gag available to allow hydrostatic testing. (Add “G” suffix to pressure code when ordering.) • PTFE coated O-ring for positive seal
B
• One piece body, all bronze construction • Rust proof steel spring • Registered in all Canadian provinces and territories, CRN #0G2663.1C
A D
C Model Number 14-205 14-206 14-207
Size (in.) 2x2 2-1/2 x 2-1/2 3x3
*Capacity lbs./hr. 3150 4676 6843
Wt./Each (lbs.) 8.4 13.0 17.0
A 3.00 3.50 4.12
Dimensions (in.) B C 7.12 3.12 8.25 3.50 9.37 3.87
D 4.00 4.00 4.00
*National Board Capacity Certified at 15 psig.(90% of actual capacity at 33% accumulation.) Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 5 psig - 03; 6 psig - 04; 8 psig - 05; 10 psig - 06; 12 psig - 07; 15 psig - 08
38
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing and Heating
Section I & VIII ASME Safety Valves 10-322 & 10-512 Series
ASME Section VIII Steam Safety Valves National Board capacity-certified safety relief valves; brass body with optional satin or polished chrome finish. Protects against excess pressure from thermal expansion and steam caused by failure of BTU input controls. Ideally suited for O.E.M. applications such as steam cookers, autoclaves, sterilizers, coffee makers and similar equipment. • Stainless steel springs • Discharge capacities to 725 lbs./hr. • Pressure settings 15 to 60 psig
10-512
Model Number 10-322 10-512
Model 10-512 available with optional stainless steel trim.
10-322
Contents | Back
Use key to designate last two digits of model number. Last two digits indicate pressure and finish. Example: 10-322-67 = 20# pressure, polished chrome * ASME (UV) Rating – 90% of actual capacity at 10% accumulation. Capacity in lbs. of saturated steam per hour
Customer Service 1-704-841-6000
• 10-322 in polished chrome only • CRN OG2663.1C, registered in all Canadian provinces and territories Size(in.) Inlet Outlet NPT NPT 3/4 M 3/4 F 1/2 M 1/2 F
Key Pressure Number 15 20 25 30 35 40 45 50 55 60
Plain Brass 01 02 04 05 06 07 09 10 11 12
Pressure Range PSIG 20-60 15-60
Height (in.) 3.75 2.62
Wt./100 (lbs.) 128 58
*Certified Capacities Satin Polished 10.322 10.512 lbs./hr. Chrome Chrome lbs./hr. J2 65 151 41 67 325 178 43 69 375 205 44 70 425 232 45 71 475 258 46 72 525 285 48 74 575 312 49 75 625 339 50 76 675 366 51 77 725 392
Prev. Page |
Next
39
Plumbing and Heating
Section I & VIII ASME Safety Valves 19 Series
Bronze Safety Valves for Steam, Air & Gas Service National Board capacity certified, high capacity, ideal for use with all types of boilers, pressure vessels, compressors and pressure piping systems. • • • • •
Pressures: 15 through 300 psig steam, air, gas Max. temp. 406˚F, 422˚F with stainless steel trim 12 sizes, 1/2" thru 2-1/2" NPT Stainless steel spring Optional 316 stainless steel wetted trim (Specify 19L or 19S Series) • Available in metal and soft seat designs • Metal to metal seat lapped to high degree optical flatness
B
Specials A-Anti-Vibration X-Oxygen Clean
A
Information required for ordering 19 Series safety valves: •Inlet Size - male pipe thread Outlet Size - female pipe thread (if important) •Service Media (steam, air or gas) •Pressure Setting •Discharge Capacity •Type Service - Power Boiler - Pressure Vessel
ASME Section I Steam Power Boiler - “V” steam lbs./hr. steam @ 3% accumulation
Contents | Back
Pressure Setting In PSIG Justified Left
Ordering Number 19-X-XX-X-XXX-XX
C
40
• Less costly repairing, soft seat easily factory replaced • Double ring, full bore, high-capacity design • Tapped body drain facilitates piping of condensate away from equipment • Registered in all Canadian provinces and territories CRN #0G2663.1C
Trim Standard M-Brass/Metal Seat K-Brass/PFA “Soft” Seat
Model Number 19KDC 19KDD 19KED 19KEE 19KFE 19KFF 19KGF 19KGG 19KHG 19KHH 19KJH 19KJJ
Orifice Designation D D E E F F G G H H J J
Set Pressure PSIG D 15 174.0 25 229.0 40 311.0 50 366.0 100 646.0 125 787.0 150 929.0 165 1014.0 200 1211.0 250 1494.0 300 1777.0 Approx 5.7 1 PSI increments
Size (in.) Inlet x Outlet 1/2 x 3/4 3/4 x 3/4 3/4 x 1 1x1 1 x 1-1/4 1-1/4 x 1-1/4 1-1/4 x 1-1/2 1-1/2 x 1-1/2 1-1/2 x 2 2x2 2 x 2-1/2 2-1/2 x 2-1/2
E 310.0 408.0 555.0 653.0 1152.0 1404.0 1656.0 1807.0 2160.0 2664.0 3168.0 10.1
Customer Service 1-704-841-6000
Service A-Sect. I Steam K- Sect. VIII Air L-Sect. VIII Steam N-Non-Code Air P-Non-Code Steam
Inlet Size C-1/2” D-3/4” E-1”
Other Suffixes Factory Issued
F-1-1/4" G-1-1/2" H-2"
Orifice Letter D G E H F J
Optional L-SS/PFA “Soft” Seat S-SS/Metal Seat
Wt./Ea. (lbs.) 1.50 1.50 1.90 2.08 3.90 4.05 7.03 6.98 11.20 11.33 19.20 19.80
F 484.0 637.0 866.0 1019.0 1798.0 2191.0 2585.0 2821.0 3371.0 4158.0 4945.0 15.7
A 1.78 1.84 1.94 2.06 2.37 2.44 2.69 2.75 3.06 3.12 3.44 3.81
Orifice G 794.0 1045.0 1421.0 1672.0 2950.0 3595.0 4240.0 4628.0 5531.0 6822.0 8112.0 25.8
J-2-1/2"
Dimensions (in.) B 6.12 6.19 6.62 6.75 8.81 8.87 10.19 10.25 11.31 11.37 13.62 14.00
H 1240.0 1631.0 2217.0 2608.0 4602.0 5609.0 6616.0 7220.0 8630.0 10,644.0 12,658.0 40.3
C 1.06 1.06 1.75 1.75 2.00 2.00 2.37 2.37 2.75 2.75 3.50 3.50
J 2035.0 2677.0 3641.0 4283.0 7557.0 9210.0 10,864.0 11,856.0 14,170.0 17,477.0 20,784.0 66.1
Prev. Page |
Next
Plumbing and Heating
Bronze Safety Valves for Steam, Air & Gas Service
ASME Section VIII Steam Unfired pressure Vessels “UV” steam lbs./hr. @ 10% accumulation *Specify Model 19S with stainless steel wetted trim for steam settings beyond 250 psig.
ASME Section VIII Air Unfired pressure Vessels “UV” air SCFM @ 10% accumulation
Contents | Back
Set Pressure PSIG D 15 179.0 25 234.0 40 322.0 50 382.0 100 684.0 125 835.0 150 985.0 165 1076.0 200 1287.0 250 1590.0 300 1892.0 Approx. 6.0 1 PSI increments 15 64.0 25 83.0 40 115.0 50 136.0 100 244.0 125 297.0 150 351.0 165 383.0 200 459.0 250 566.0 300 673.0 Approx. 2.2 1 PSI increments
(continued)
E 320.0 417.0 574.0 682.0 1220.0 1489.0 1758.0 1920.0 2296.0 2834.0 3373.0 10.8.0
F 499.0 652.0 896.0 1064.0 1904.0 2324.0 2744.0 2996.0 3584.0 4424.0 5265.0 16.8.0
Orifice G 819.0 1070.0 1471.0 1746.0 3124.0 3813.0 4502.0 4916.0 5881.0 7259.0 8639.0 27.6
114.0 149.0 204.0 243.0 434.0 530.0 626.0 683.0 818.0 1009.0 1201.0 3.8
178.0 232.0 319.0 379.0 678.0 828.0 977.0 1067.0 1276.0 1575.0 1874.0 6.0
292.0 381.0 524.0 622.0 1112.0 1358.0 1603.0 1750.0 2094.0 2584.0 3075.0 9.8
Customer Service 1-704-841-6000
H 1278.0 1669.0 2295.0 2725.0 4875.0 5950.0 7025.0 7670.0 9175.0 11325.0 13,479.0 43.0
J 2099.0 2741.0 3768.0 4474.0 8005.0 9770.0 11535.0 12594.0 15066.0 18596.0 22,132.0 70.6
455.0 594.0 817.0 970.0 1736.0 2118.0 2501.0 2731.0 3267.0 4032.0 4798.0 15.3
747.0 976.0 1342.0 1593.0 2849.0 3478.0 4106.0 4484.0 5364.0 6621.0 7878.0 25.1
Prev. Page |
Next
41
Plumbing and Heating
29 Series
OEM Style Bronze Safety Valves For Steam, Air & Non-Hazardous Gas National Board capacity-certified; PFA Teflon™ seat resists corrosive boiler chemicals. Top-guided design with rust-proofed steel stem and stainless steel springs. Features patented “soft” seat. • Compact design ideal for OEM applications • Capacity Certified 30 to 200 psig • Optional stainless trim (add “L” suffix)
• Tapped body drain • No critical metal-to-metal seal • Registered in all Canadian provinces and territories. CRN#0G2663.1C ASME Code and Service No Suffix (Default) = Sec. I “V” Steam US = Sec. VIII “UV” Steam UA = Sec. VIII ”UV” Air
A
Ordering Number 29-XXX-XX-X-XX
C
B Information required for ordering 29 Series safety valves: • Inlet Size - male pipe thread Outlet Size - female pipe thread (if important) • Service Media (steam, air or gas) • Pressure Setting • Required Discharge Capacity • Type Service* - Power Boiler - Pressure Vessel *Note: Unless otherwise specified valve are furnished with ASME Section I “V” steam rating. For ASME Section VIII applications add “US” suffix for UV steam or “UA” suffix for UV air.
Optional Stainless Trim Add “L” suffix for Type 316 Stainless Steel Wetted Trim. Models 29-202 and 29-303 only
Model Number 29-102 29-202 29-302 29-303 29-402 29-501
Inlet x Outlet Size 102 = 3/8 x 1 202 = 1/2 x 1 302 = 3/4 x 1 303 = 3/4 x 1-1/4 402 = 1 x 1-1/4 501 = 1-1/4 x 1-1/4 Size(in.)
Inlet 3/8 1/2 3/4 3/4 1 1-1/4
Wt./Ea. (lbs.) 1.30 1.33 1.90 3.43 3.43 3.48
Outlet 1 1 1 1-1/4 1-1/4 1-1/4
Set Pressure Number 50 75 100 125 150 200 Approx. 1 PSI increments
29-102 29-202 29-302 238.00 331.00 423.00 516.00 608.00 794.00 3.70
29-303 29-402 29-501 479.00 664.00 851.00 1036.00 1223.00 1596.00 7.40
ASME Section VIII Steam Unfired pressure vessels “UV” steam lbs./hr. @ 10% accumulation
50 75 100 125 150 200 Approx. 1 PSI increments
251.00 350.00 448.00 547 .00 646.00 844.00 3.95
504.00 704.00 902.00 1102.00 1299.00 1697.00 8.00
ASME Section VIII Air Unfired pressure vessels “UV” air SCFM @ 10% accumulation
50 75 100 125 150 200 Approx. 1 PSI increments
89.00 124.00 159.00 194.00 230.00 300.00 1.40
180.00 250.00 321.00 391.00 463.00 605.00 2.80
ASME Section I Steam Power Boiler “V” steam lbs./hr. @ 3% accumulation
42
Contents | Back
Set Pressure Code See Table
Customer Service 1-704-841-6000
A 5.41 5.41 5.41 7.25 7.25 7.25
Pressure PSIG 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115
Dimensions (in.) B 1.25 1.25 1.25 1.69 1.69 1.69
Suffix Number -07 -08 -09 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24
Pressure PSIG 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200
C 2.12 2.12 2.12 2.75 2.75 2.75
Suffix Number -25 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45
Prev. Page |
Next
Plumbing and Heating
119 Series
Cast Iron Safety Valve Heavy-duty 119 Series cast iron valves are high capacity safety valves ideal for use with all types of boilers, pressure vessels and pressure piping systems. Their top-guided design includes two control rings that ensure seat tightness. Direct replacement for most competitive models. • Set pressures to 250 psig @ 450˚F maximum • Flanged inlet sizes: 1-1/2" through 6" ANSI 250 lb.; some sizes available in female NPT • National Board certified ASME flow ratings • Metal to metal seating, lapped to optical flatness • Semi-nozzle design comes in eight orifice sizes Base Model Number 119 JGC 119 KHC 119 KHA 119 KJC 119 LJC 119 LJA 119 LKC 119 MKA 119 MKC 119 NMD 119 PMD 119 QPD 119 RPD
Valve Size(in.) 1-1/2 250# x 2 1/2 FNPT 2 250# x 3 FNPT 2 FNPT x 3 FNPT 2-1/2 250# x 3 FNPT 2-1/2 250# x 4 FNPT 2-1/2 FNPT x 4 FNPT 3 250# x 4 FNPT 3 FNPT x 4 FNPT 3 250# x 4 FNPT 4 250# x 6 125# 4 250# x 6 125# 6 250# x 8 125# 6 250# x 8 125#
Orifice Letter J K K K L L L M M N P Q R
• Rust-proof steel stem, spring and spring washers • Drip pan elbows are available (see page 38) • Registered in all Canadian provinces and territories under CSA B51, CRN OG2663.1C • Optional 316 Stainless Steel wetted trim (disc and nozzle) specify 120 series Orifice Dimensions(in.) B C Area(Sq. in.) A 1.36 15.00 4.00 4.31 1.93 16.00 4.00 4.62 1.93 16.00 4.00 4.62 1.93 16.00 4.00 4.62 2.99 22.00 5.12 5.62 2.99 22.00 5.12 5.62 2.99 22.00 5.12 5.62 3.77 22.00 5.12 5.62 3.77 22.00 5.12 5.62 4.55 28.00 7.25 6.75 6.69 28.00 7.25 6.75 11.59 42.00 10.00 9.25 16.79 42.00 10.00 9.25
Wt./lbs. APP 35 36 3-3/4 37 41 84 5-3/8 81 85 5-3/8 80 87 210 215 530 530
Hex D
Information required for ordering 119 series valves: 1. Determine the orifice letter that corresponds to your required flow rate from the following capacity charts. 2. Select the inlet x outlet connection options from the list of models available for that orifice (above). 3. Specify base model number, set pressure, ASME Code section and service. For Further information request brochure #PHBR119S
Orifice J
Orifice K
Orifice L
Contents | Back
Set Press. PSIG 15 30 50 75 100 125 150 175 200 225 250
Sec. I lbs./hr. 1947 2868 4096 5646 7227 8809 10390 11971 13552 15133 16714
VIII Stm. lbs./hr. 2008 2929 4280 5969 7657 9346 11034 12723 14412 16100 17789
VIII Air SCFM 715 1043 1523 2124 2726 3327 3928 4529 5130 5731 6332
15 30 50 75 100 125 150 175 200 225 250
2761 4067 5809 8008 10250 12493 14735 16978 19220 21463 23705
2848 4154 6070 8465 10860 13255 15650 18045 20440 22834 25229
1014 1479 2161 3013 3865 4718 5570 6423 7275 8128 8980
15 30 50 75 100 125 150 175 200 225 250
4286 6314 9018 12432 15913 19394 22876 26357 29838 33320 36801
4421 6449 9423 13141 16859 20577 24295 28013 31731 35449 39167
1574 2295 3354 4678 6001 7324 8648 9971 11294 12618 13941
Orifice M
Orifice N
Orifice P
Set Press. PSIG 15 30 50 75 100 125 150 175 200 225 250
Sec. I lbs./hr. 5410 7969 11382 15691 20085 24480 28874 33268 37662 42056 46451
VIII Stm. lbs./hr. 5580 8140 11894 16587 21280 25973 30666 35358 40051 44744 49437
VIII Air SCFM 1986 2897 4234 5904 7574 9245 10915 12586 14256 15926 17597
15 30 50 75 100 125 150 175 200 225 250
6522 9608 13723 18918 24215 29513 34811 40108 45406 50704 56002
6728 9814 14340 19998 25655 31313 36971 42629 48287 53944 59602
2395 3493 5104 7118 9132 11146 13160 15173 17187 19201 21215
15 30 50 75 100 125 150 175 200 225 250
9592 14131 20183 27823 35615 43407 51199 58990 66782 74574 82366
9895 14434 21091 29412 37733 46055 54376 62697 71018 79340 87661
3522 5138 7507 10469 13431 16393 19355 22317 25278 28240 31202
Customer Service 1-704-841-6000
Orifice Q
Orifice R
Set Press. PSIG 15 30 50 75 100 125 150 175 200 225 250
Sec. I lbs./hr. 16617 24480 34964 48200 61698 75197 88695 102193 115691 129189 142687
VIII Stm. lbs./hr. 17141 25004 36537 50952 65368 79783 94199 108614 123030 137445 151861
VIII Air SCFM 6101 8900 13005 18136 23267 28398 33529 38660 43791 48923 54054
15 30 50 75 100 125 150 175 200 225 250
24061 35446 50628 69791 89336 108880 128425 147969 167514 187059 206603
24820 36205 52903 73776 94649 115522 136395 157267 178140 199013 219886
8834 12887 18830 26260 33689 41119 48549 55978 63408 70837 78267
ASME Section I - Steam Boilers Pounds of saturated steam per hour @ 3% or 2 psig accumulation, whichever is greater. ASME Section VIII - Pressure Vessels Pounds of saturated steam per hour @ 10% or 3 psig accumulation, whichever is greater. ASME Section VIII - Pressure Vessels Standard cubic feet of air per minute @ 10% or 3 psig, whichever is greater.
Prev. Page |
Next
43
Plumbing and Heating
Drip Pan Elbow
The use of a drip pan elbow is highly recommended for steam service safety valves. When attached to a safety valve outlet, these elbows collect and remove condensate as well as isolate the valve from discharge piping stresses. Elbows through 4'' feature female NPT threads and connect to the valve outlet by means of a close nipple. The 6'' and 8'' elbows have integral 125# ANSI B16.1 flanges and bolt directly to the valve outlet. Model Number Q-5740-00 Q-5739-00 Q-5736-00 Q-5737-00 Q-5734-00 N-4098-00 N-4100-00 N-4102-00 N-4104-00 N-4106-00
Size (in.) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8
A 1.50 1.50 2.00 2.00 3.00 4.00 4.00 6.00 8.00 10.00
Dimensions (in.) C D E 1.62 2.25 1.00 1.62 2.25 1.00 2.12 3.37 1.50 2.12 3.37 1.50 2.25 3.62 1.62 3.00 4.37 1.87 3.50 4.87 2.12 4.50 5.75 2.62 6.62 7.62 3.00 7.50 8.62 4.12
B 3.75 3.75 5.50 5.50 6.25 7.37 8.00 9.62 12.75 16.50
F 0.25 0.25 0.37 0.37 0.50 0.75 0.75 0.75 0.75 1.00
Approx. G Wt./lbs. 1.50 2.00 1.50 2.00 2.12 5.00 2.12 5.00 2.25 7.00 2.75 11.00 3.12 17.00 3.25 30.00 8.00 84.00 10.75 151.00
Note: Ordering size of drip pan elbow is also nominal outlet size of safety valve.
500 Series
Versatile ASME Section VIII safety relief valve certified for steam, air/gas and liquid service. Choice of bronze, carbon steel or stainless steel bodies to suit a wide range of applications. • • • • • •
Set pressures to 900 psig @ 800˚ F maximum Inlet sizes 1/2" through 2" Wide range of materials and options High capacity full-nozzle design Stainless steel springs are standard Short “tuned” blowdown
• • • • •
API 527 Seat tightness Back pressure tight bonnet design Packed lever and screwed cap designs One trim suitable for all types of service CSA B51 CRN OG2663.1C
B Model Number 5XXDC 5XXDCD* 5XXDD 5XXDDD* 5XXED 5XXEE 5XXFE 5XXFF 5XXGF 5XXGG 5XXHG 5XXHH 5XXJH
A
C
Orifice Designation D D D D E E F F G G H H J
Size (in.) Inlet x Outlet 1/2 X 1 1/2 X 3/4 3/4 X 1 3/4 X 3/4 3/4 X 1-1/4 1 X 1-1/4 1 X 1-1/2 1-1/4 X 1-1/2 1-1/4 X 2 1-1/2 X 2 1-1/2 X 2-1/2 2 X 2-1/2 2X3
Flow Area(sq. in.) 0.13 0.13 0.13 0.13 0.23 0.23 0.36 0.36 0.59 0.59 0.92 0.92 1.50
A (in.) 2.37 2.37 2.37 2.37 2.62 2.62 2.87 2.87 3.25 3.25 3.50 3.50 4.00
B (in.) 7.50 7.50 7.50 7.50 9.00 9.00 10.25 10.25 13.25 13.25 15.00 15.00 17.00
C (in.) 1.62 1.62 1.62 1.62 2.00 2.00 2.37 2.37 2.62 2.62 2.75 2.75 3.25
Wt. Ea. (lbs.) 2.0 2.0 2.0 2.0 3.0 3.0 5.0 5.0 9.0 9.5 15.5 16.0 23.0
*3/4" outlet option available with 510 and 520 bronze bodied models only.
Model Numbering System 500 Series Safety Relief Valve POSITION 1
2
3
4
5
6
7
8
CAP STYLE 3
ORIFICE LETTER J
INLET H
CONNECTION B
SERVICE K
SEAT M
51=BRONZE/BRASS
1=SCREWED CAP
D
C=1/2
B=MNPT X FNPT J=SEC VIII LIQUID
M=METAL
FACTORY ISSUED
SET PRESSURE,
52=BRONZE/ STAINLESS
2=SCREWED + GAG
E
D=3/4
D=3/4" OUTLET K=SEC VIII AIR 510 & 520 “D” ONLY
N=NEOPRENE
LETTERS / NUMBERS OR SPECIAL OPTIONS OR FEATURES
psig (4 DIGITS)
53=CARBON/ STAINLESS
3=PACKED LEVER
F
E=1
L=SEC VIII STEAM
K=TEFLON
"AA"=DEFAULT STANDARD
VACUUM
54=ALL STAINLESS
4=PACKED + GAG
G
F=1-1/4
M=NON CODE LIQUID
V=VITON
"HT" HIGH TEMP. SPRING
"HG" PREFIX+ 2 DIGIT
H
G=1-1/2
N=NON CODE AIR / GAS E=EPDM
J
H=2
SERIES BODY/TRIM MAT'L 5 2
P=NON CODE STEAM
B=NITRILE
Q=VACUUM
S=SILICONE
9
10
11
SPECIAL OPTIONS A A
12
13
SET PRESSURE 0 4 2 5
Notes: 1. The ASME Code Section VIII requires a lift lever for the following services: air, steam, or hot water over 140°F 2. Maximum back pressure is 50 psig. 3. High temperature stainless steel alloy spring is required above 422°F / 217°C. Specify option “HT” 4. Service limits for Teflon® seat: -330 to +250°F / -201 to 121°C
44
Contents | Back
Customer Service 1-704-841-6000
14
Prev. Page |
Next
Plumbing and Heating
500 Series
Versatile ASME Section VIII safety relief valve (continued)
ASME Section VIII Steam - POUNDS PER HOUR OF SATURATED STEAM @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED. Set Press. PSIG D 15 188 20 216 25 245 30 274 35 305 40 337 45 368 50 400 55 431 60 463 65 494 70 526 75 558 80 589 85 621 90 652 95 684 100 715 125 873 150 1031 175 1189 200 1346 225 1504 250 1662 275 1820 300 1977 325 2135 350 2293 375 2451 400 2608 425 2766 450 2924 475 3082 500 3239 525 3397 550 3555 575 3713 600 3870 625 4028 650 4186 675 4344 700 4501 725 4659 750 4817 775 4975 800 5132 825 5290 850 5448 875 5606 900 5763 Approx. 1 psi Increment 6.3
Series
Orifice E F 331 520 381 600 432 679 482 759 538 846 593 934 649 1021 705 1108 760 1196 816 1283 872 1371 927 1458 983 1546 1038 1633 1094 1721 1150 1808 1205 1896 1261 1983 1539 2421 1817 2858 2095 3295 2373 3733 2651 4170 2929 4607 3207 5045 3485 5482 3763 5919 4041 6357 4319 6794 4597 7231 4875 7669 5153 8106 5431 8543 5709 8981 5987 9418 6266 9855 6544 10293 6822 10730 7100 7378 7656 7934 8212 8490 8768 9046 9324 9602 9880 10158 11.1
ASME Section VIII Air - STANDARD CUBIC FEET OF AIR PER MINUTE @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED.
G 853 984 1114 1245 1388 1532 1676 1819 1963 2106 2250 2393 2537 2680 2824 2968 3111 3255 3972 4690 5408 6126 6843 7561 8279 8997 9714 10432 11150 11867 12585 13303 14021 14738 15456 16174 16892 17609
H 1332 1536 1740 1943 2168 2392 2616 2840 3064 3288 3512 3736 3960 4184 4408 4632 4857 5081 6201 7322 8442 9562 10683 11803 12924 14044 15165 16285 17405 18526 19646 20767 21887 23008
J 2180 2513 2846 3180 3546 3913 4280 4646 5013 5380 5746 6113 6479 6846 7213 7579 7946 8313 10146 11979 13812 15645 17478 19312 21145 22978 24811 26644 28477 30311 32144 33977 35810 37643
28.7
44.8
73.3
17.5
510
Body Bronze Trim Brass Max. Set-Steam 250 psi Max Set-Air/Gas/Liquid 300 psi Temp. Limits -60 / 406˚F
Set Press. PSIG D 15 67 20 77 25 87 30 97 35 109 40 120 45 131 50 142 55 154 60 165 65 176 70 187 75 198 80 210 85 221 90 232 95 243 100 255 125 311 150 367 175 423 200 479 225 535 250 592 275 648 300 704 325 760 350 816 375 872 400 928 425 985 450 1041 475 1097 500 1153 525 1209 550 1265 575 1321 600 1378 625 1434 650 1490 675 1546 700 1602 725 1658 750 1715 775 1771 800 1827 825 1883 850 1939 875 1995 900 2051 Approx. 1 psi Increment 2.2
E 118 136 154 172 191 211 231 251 271 290 310 330 350 370 389 409 429 449 548 647 746 845 944 1043 1142 1240 1339 1438 1537 1636 1735 1834 1933 2032 2131 2230 2329 2428 2527 2626 2725 2824 2923 3022 3121 3220 3319 3418 3517 3616
F 185 213 242 270 301 332 363 395 426 457 488 519 550 581 612 644 675 706 862 1017 1173 1329 1484 1640 1796 1951 2107 2263 2418 2574 2730 2885 3041 3197 3352 3508 3664 3819
4
6.2
520
530
540
Bronze Stainless 300 psi 900 psi -60 / 422˚F
Carbon Steel Stainless 900 psi 900 psi -20 / 800˚F
Stainless Steel Stainless 900 psi 900 psi -60 / 800˚F
Orifice G 304 350 397 443 494 545 596 648 699 750 801 852 903 954 1005 1056 1107 1158 1414 1669 1925 2180 2436 2691 2947 3202 3458 3713 3969 4224 4480 4735 4991 5246 5501 5757 6012 6268
10.2
H 474 547 619 692 772 851 931 1011 1091 1170 1250 1330 1410 1489 1569 1649 1729 1808 2207 2606 3005 3404 3802 4201 4600 4999 5398 5796 6195 6594 6993 7392 7791 8189
J 776 895 1013 1132 1262 1393 1523 1654 1784 1915 2045 2176 2306 2437 2567 2698 2828 2959 3611 4264 4916 5569 6221 6874 7526 8179 8831 9484 10136 10789 11441 12094 12746 13399
16
26.1
Note: 1.) Specify “HT” high temperature inconel springs for service temperatures beyond 422˚F 2.) Models 510, 520 and 540 are suitable for cryogenic service to -320˚F, subject to special preparation and use of “K” option Teflon® seat. Consult factory for details.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
45
Plumbing and Heating Versatile ASME Section VIII safety relief valve (continued) ASME Section VIII WATER - US GALLONS PER MINUTE OF WATER @ 10% OVERPRESSURE. NATIONAL BOARD CERTIFIED. Set Press. PSIG D 15 14 20 16 25 18 30 19 35 21 40 22 45 24 50 25 55 26 60 28 65 29 70 30 75 31 80 32 85 33 90 34 95 35 100 36 125 40 150 44 175 47 200 50 225 53 250 56 275 59 300 62 350 66
15 Series
Orifice F 40 45 50 54 58 62 66 70 73 76 79 82 85 88 91 93 96 98 110 121 130 139 148 156 163 171 184
G 65 74 82 89 96 102 108 114 120 125 130 135 140 145 149 153 158 162 181 198 214 229 242 256 268 280 302
H 102 115 127 138 149 160 169 178 187 195 203 211 218 226 233 239 246 252 282 309 334 357 378 399 418 437 472
J 167 189 208 226 244 261 277 292 306 320 333 345 357 369 381 392 402 413 462 506 546 584 619 653 685 715 772
Set Press. PSIG D 325 64 375 69 400 71 425 73 450 75 475 77 500 79 525 81 550 83 575 85 600 87 625 89 650 91 675 92 700 94 725 96 750 97 775 99 800 100 825 102 850 104 875 105 900 107
E 113 121 125 129 133 136 140 143 147 150 153 157 160 163 166 169 171 174 177 180 183 185 188
Orifice F 178 191 197 203 209 215 220 226 231 236 241
G 291 313 323 333 343 352 361 370 379 388 396
H 455 489 505 520 535 550 564
J 744 799 826 851 876 900 923
Note: To determine water capacity at 25% overpressure, multiply the capacity at 10% by 1.066.
ASME Air Relief Valves • • • •
A
B
National Board certified capacities for air and gas service in air compressors, air receivers and gas lines. Use key to designate last two digits of product number.
46
E 25 29 32 34 37 40 42 44 46 48 50 52 54 56 58 59 61 63 70 77 83 89 94 99 104 108 117
Contents | Back
National Board certified 15 psig through 250 psig Stainless steel springs with silicone soft seat Viton O-ring seat, 3/4'' & 1'' only Maximum Temp. 325˚F Set Pressure PSIG 15 20 25 30 35 40 50 60 75 80 100 120 125 140 150 160 165 175 180 200 220 230 235 250 Model Number 15-112 15-115 15-117 15-118 15-119
• Registered in all Canadian provinces and territories: CRN #0G2663.1C • ASTM B16 Brass Body
Capacities in SCFM @ 10% Accumulation 15-112 15-115 & 117 15-118 1/4" 3/8" or 1/2" 3/4" 60 107 70 124 79 140 88 156 98 174 43 109 193 51 128 229 60 149 265 72 179 319 76 190 337 92 230 409 108 271 481 112 281 499 124 312 553 133 332 589 141 353 625 145 363 644 153 383 680 157 393 698 173 432 770 475 842 495 878 505 896 535 950 Inlet Size (in.) 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
Customer Service 1-704-841-6000
15-119 1" 222 256 290 323 361 398 473 547 659 696 845 995 1032 1144 1218 1293 1330 1405 1442 1591 1740 1815 1852 1964
Dimensions (in.) A B 2.625 .78 3.250 1.125 3.375 1.125 4.062 1.218 5.125 1.875
Suffix No. -A2 -A0 -A1 -A3 -A5 -01 -B3 -02 -03 -04 -05 -06 -07 -08 -09 -10 -J1 -11 -12 -13 -14 -R8 -15 -16 Wt./100 (lbs.) 18.5 42.2 45.3 58.0 153.0
Prev. Page |
Next
Plumbing and Heating
Vacuum Relief Valves 37 Series
Vacuum Relief Valves for Water Heater Protection Automatically vents a system if a vacuum should occur. Prevents siphoning of the water from the system and collapse of a tank. Design certified by CSA in accordance with ANSI Z21.22. Also suitable for low pressure (15 psig maximum) steam service. • Maximum temperature: 250°F • Rated for water pressures to 200 psig • Model 37-100 bronze body (silicone rubber seat) or Model 37-200 brass body (EPDM rubber seat) Model Number 37-101 37-102 37-201 37-202 37-302
37-100
• Auto-vacuum relief at less than 1/2" vacuum • Venting capacity as measured in cfm of air @ 2" mercury (vacuum)
Size (in.)
Venting Capacity
1/2 3/4 1/2 3/4 3/4
14 CFM 19 CFM 15 CFM 16 CFM 14 CFM
Wt./100 (lbs.) 66.0 67.5 30.4 32.4 17.0
Suffix key: Satin Brass - 01; Satin Chrome - 02 *NOTE: These valves are not designed for anti-siphon backflow prevention. To prevent back-siphonage of polluted water into a potable water system, choose from Conbraco’s line of backflow preventers.
37-200
Contents | Back
37-302
Customer Service 1-704-841-6000
Prev. Page |
Next
47
Plumbing and Heating
Hydronic Heating Specialties 16-XT Series
Expansion Tanks for Hydronic Systems Conbraco non-potable expansion tanks help maintain balanced pressure throughout a hot water heating system by absorbing thermal expansion. Pre-pressurized, they’re designed to prevent system damage and unnecessary discharges by relief valves and ensure long, trouble-free system life. • • • • •
Welded steel construction Rugged flexible diaphragm Pre-charged at 12 psig Compact design saves energy and space Glycol compatible
Model Number 16-XT1-01 16-XT3-01 16-XT5-01 16-XT7-01
1/2'' NPT
Capacity (gal.) 2.11 4.76 6.34 13.21
Exp. Vol. (gal.) 1.77 3.99 5.31 11.06
• Maximum working pressure: 150 psig • Ideal for peak use systems such as car washes, processing plants, hotels/motels, commercial laundries
Connection 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT
A 10.88 13.75 15.88 20.00
Net Wt. (lbs.) 5.5 8.1 9.7 23.4
B 08.00 10.75 12.00 15.00
A
B
27 Series
Radiator Air Valve Model Number 27-202-02 H-2404-00
35 Series
Wt./100 (lbs.) 2.0 0.9
Size (in.) 1/8 Key only
All Bronze Feed Water Pressure Regulators Available in 1/2" union threaded, threaded and solder union configurations. Purge lever/fast fill feature. Cartridge replaceable in-line. • No cage screws • Individually set at 15 psig - Adjustable 10 to 25 psig • Temperatures to 210°F Model Number 35-503-01 35-603-01 35-703-01
48
Contents | Back
Size (in.) 1/2 Union Threaded 1/2 Threaded 1/2 Solder Union
Customer Service 1-704-841-6000
• High capacity • SS strainer, in-line, standard • Choice of inlet connections
Height (in.) 5.25 5.25 5.25
Length (in.) 4.31 3.50 3.18
Wt./100 (lbs.) 255 225 232
Prev. Page |
Next
Plumbing and Heating
35-6A3 & 35-6H3 Series
All Bronze Combination Backflow Preventer & Feed Water Regulators Positive protection against backflow when supply pressure falls below system pressure. • Designed for continuous pressure, hot or cold water service Model Number 35-6A3-BF 35-6H3-BF
35-403 Series
Size (in.) 1/2 Union NPT x NPT 1/2 Solder Union x NPT
Height (in.) 5.25 5.25
Wt./100 (lbs.) 450 440
Length (in.) 8.50 8.50
Multi-Orifice Control Valve Provides flow control on tankless heaters; for delivery of 2-1/2, 3, 3-1/2, and 4 GPM. Easy adjustment. • Maximum temperature: 250°F Model Number 35-403-01
35FC Series
• Maximum pressure: 150 psig
Size (in.) 1/2 Solder
Height (in.) 2.11
Wt./100 (lbs.) 42.8
Length (in.) 2.00
All Bronze Hydronic Flow Check Valves The flow check is designed to provide positive shut-off when water service is interrupted. • • • • •
Corrosion resistant Wear resistant metal to metal seat Replaceable seat assembly By-pass option Sweat or thread connection available Model Number 35-FC4-01 35-FC5-01 35-FC6-01 35-FC7-01 35-FC8-01 35-FC4-02 35-FC5-02
Contents | Back
Customer Service 1-704-841-6000
Size (in.) 3/4 1 1-1/4 1-1/2 2 3/4 1
• Designed for easy maintenance • Suitable for hot or cold water service • Maximum working pressure 50 psig. for 3/4" 1-1/4" 125 psig for 1-1/2" - 2" • Maximum operating temperature 250˚F
Connection NPT NPT NPT NPT NPT Sweat Sweat
Wt./100 (lbs.) 233 261 502 867 1220 112 155
Prev. Page |
Next
49
Plumbing and Heating
35FV Series
Automatic Air Vent The 35FV Series provides automatic air venting of hot or cold water in distribution systems. The connections conform to ANSI B1.20.1: maximum working temperature of 230°F.
A
• Sizes 1/8" (35FV001) and 1/4"(35FV101) • Corrosion resistant • Variety of pipe end connections available
B
Model Number 35FV001 35FV101
A 1.50 1.85
• Designed for easy maintenance • Purges air from hydronic systems • Suitable for use with glycol systems DImensions (in.) B 3.00 3.20
C 0.12 NPT 0.25 NPT
C
Ball Valve with Automatic Air Vent The 35FV001 can be installed with an Apollo® ball valve in a typical hydronic distribution system. To order specify P/N# 78300FV.
78-300-FV
57 Series
Globe Valves Globe valves offer a 200 psig rating and aluminum wheel handle. Model Number 57-001-01 57-002-01
58 Series
Size (in.) 1/4 NPT x 1/4 NPT 3/8 NPT x 3/8 NPT
Wt./100 (lbs.) 28.0 37.1
Balancing Valves Provide dependable hydronic control; for use with 1/2" and 3/4" copper water piping. Pressure rated to 150 psig. Model Number 58-003-01 58-004-01
78-668 Series
Size (in.) 1/2 Solder 3/4 Solder
Cv 4 14
Wt./100 (lbs.) 30.0 53.4
Bronze Purge, Balance & Shut-off Valve Straight-through flow; all brass cover and chain prevent accidental system drainage; hose thread connection for disposal of drained media. Model Number 78-668-01 78-668-02 78-671-01*
Size (in.) 3/4 1 3/4
Wt./100 (lbs.) 206 359 198
*Available with screwdriver slotted stainless steel stem.
50
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing and Heating
Mixing Valves “Point of Source” (For specific technical information see catalog PHBRMIX) TV Series
Mixing Valves Designed to provide extension of water heater capacity and hot water temperature control in residential applications. Numbered indicator control allows easy setup and fingertip control. Available in low or high temperature options depending on application. • Low temperature range (100°-130°F) • High temperature range (110°-150°F) • Stainless steel spring and rings
Size (in.) 1/2 3/4 1/2 3/4
Connection Solder Solder Threaded Threaded
• Bronze body • Thermoplastic shuttle assembly • Thread or solder connections Low Temp. 100˚-130˚ 35-203-L1 35-204-L1 35-205-L1 35-206-L1
High Temp 110˚-150˚ 35-203-01 35-204-01 35-205-01 35-206-01
Wt./100 (lbs.) 88.00 101.00 88/99.50 113.00
To order Repair Kits use part numbers 35-200-01RK, 35-200-L1RK
34A & 34H Series
Thermostatic Mixing Valves 34A Series are ASSE 1017 certified mixing valves designed for hot water distribution systems; 34H Series are designed for radiant heat applications, to provide better control of hot water supply. Numbered indicator control allows easy setup and fingertip control. Available in low or high temperature range options depending on application. Integrated check provides added protection of thermostat and cross connection control. • Low temperature range (85°-140°F) • High temperature range (120°-180°F) • Stainless steel spring • Bronze body • Thermoplastic shuttle assembly
Size (in.) 1/2 1/2 3/4 3/4 1 1 1/2 1/2 3/4 3/4 1 1
34C Series
• • • • • •
Supply pressures to 125 psig Union threaded or solder connections Integrated check High flow capacity Broad temperature range Cold water failure protection Low Temp. 85˚-140˚ 34A-103-01 34A-103-02 34A-104-01 34A-104-02 34A-105-01 34A-105-02 34A-113-01 34A-113-02 34A-114-01 34A-114-02 34A-115-01 34A-115-02
Connection Sweat Thread Sweat Thread Sweat Thread Sweat/Check Thread/Check Sweat/Check Thread/Check Sweat/Check Thread/Check
High Temp 120˚-180˚ 34H-103-01 34H-103-02 34H-104-01 34H-104-02 34H-105-01 34H-105-02 34H-113-01 34H-113-02 34H-114-01 34H-114-02 34H-115-01 34H-115-02
Commercial High Capacity Mixing Valves 34C Series ASSE 1017 listed, high-capacity mixing valves are thermostatically controlled regulating valves designed for use in large commercial potable and non-potable hot water systems. Simple adjustment of water temperature from 90°-140°F or 130°-180°F. • • • •
Sizes: 3/4”, 1”, 1-1/4”, 1-1/2”, 2” Low temp range (90°-140°F) High temp range (130°-180°F) Threaded connections
Size (in.) 3/4 1 1-1/4 1-1/2 2
• • • •
Installs easily on heating source Patented design for easy in-line maintenance Supply pressures to 150 psig U. S. Patent No. 6,328,219
Low Temp.* 90˚-140˚ F 34C-104-01 34C-105-01 34C-106-01 34C-107-01 34C-108-01
High Temp. 130˚-180˚ F 34C-104-H1 34C-105-H1 34C-106-H1 34C-107-H1 34C-108-H1
*ASSE 1017 Certified
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
51
Plumbing and Heating
Water Heater Accessories 40-XT Series
Expansion Tanks for Potable Systems Designed to protect closed water supply systems, appliances and piping from the hazards of thermal expansion, such as premature water heater failure. Installs easily on direct fired gas, oil and electric hot water heaters and storage tanks. Their pre-pressurized steel design includes an expansion membrane that stops any contact between the water and air in the tank. • Ideal for use in dorms, apartments, office buildings and hospitals • Maximum working pressure: 150 psig • 100 percent non-metallic non-corrosive water reservoir
• Field-adjustable pre-charge • Compatible with most standard water heaters and storage tanks
3/4 NPT
Model Number 40-XT1-01 40-XT3-01 40-XT5-01 40-XT7-01
A
Capacity (Gal.) 2.11 4.76 6.34 13.21
Exp. Vol. (Gal.) 1.40 3.17 4.22 8.82
Connection 3/4 NPT 3/4 NPT 3/4 NPT 3/4 NPT
Dimensions (in.) A B 10.88 8.00 13.75 10.75 15.88 12.00 20.00 15.00
Net Wt. (lbs.) 5.5 8.1 9.7 23.4
B
78-RV Series
Bronze Water Heater Shut-Off Valves with Thermal Expansion Control Valve These valves provide thermal expansion protection and water heater shut-off in a single, simple installation. They’re space-saving and a less costly alternative to large expansion tanks for avoiding potential hazards in closed systems. • • • • • • •
Sweat and threaded connections available Corrosion-resistant all-bronze body Chrome-plated ball Stainless steel fasteners and springs Bubble-tight shut-off Listed with IAPMO Listed with SBCCI PST & ESI Sweat Number 78-304-RV 78-314-RV 78-324-RV 78-305-RV 78-315-RV 78-325-RV 78-306-RV 78-316-RV 78-326-RV 78-307-RV 78-317-RV 78-327-RV 78-504-RV 78-514-RV 78-524-RV 78-505-RV 78-515-RV 78-525-RV 78-506-RV 78-516-RV 78-526-RV 78-507-RV 78-517-RV 78-527-RV
52
Contents | Back
Threaded Number 78-404-RV 78-414-RV 78-424-RV 78-405-RV 78-415-RV 78-425-RV 78-406-RV 78-416-RV 78-426-RV 78-407-RV 78-417-RV 78-427-RV 78-604-RV 78-614-RV 78-624-RV 78-605-RV 78-615-RV 78-625-RV 78-606-RV 78-616-RV 78-626-RV 78-607-RV 78-617-RV 78-627-RV
Customer Service 1-704-841-6000
• Control valve available with hose barb fitting, 1/2" pex fitting, compression fitting or 1/2" combination sweat/thread fitting which makes discharge piping assembly easy • Expansion control valve taps into side of shut-off valve
Control Valve Drain Outlet (in.) hose barb hose barb hose barb pex fitting pex fitting pex fitting compression fitting compression fitting compression fitting 1/2 combo swt./thd. fitting 1/2 combo swt./thd. fitting 1/2 combo swt./thd. fitting hose barb hose barb hose barb pex fitting pex fitting pex fitting compression fitting compression fitting compression fitting 1/2 combo swt./thd. fitting 1/2 combo swt./thd. fitting 1/2 combo swt./thd. fitting
Size (in.) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1
Setting 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig 125 psig 100 psig 80 psig
Prev. Page |
Next
Plumbing and Heating
Mixing Valves “Point of Use” 34D Series “Point of Use” Mini-Mixer 34D Series ASSE 1016 certified, “point of use” mixing valves are designed to sense and maintain preset outlet temperature compensating for fluctuations in hot and cold water temperatures and pressures. The mixed water temperature range is 85˚F to 120˚F and will hold a desired temperature within a ±2˚F at all times. The 34D also has an adjustable temperature limit stop to prevent the valve from being set above 120˚F. • • • •
Corrosion Resistant Compression and IPS connections Easy maintenance Consistent outlet temperature with changing inlet conditions • Elevated temperature thermal element protection
34D Single Outlet “Point Of Use” Mini Mixer
34D Double Outlet “Point Of Use” Mini Mixer
• • • • •
Nickel plate option Saves energy by extending hot water supply Tamper resistant Scald protection Integrated check valves
Single Outlet Model Number 34D-111-01 34D-111-08 34D-112-01 34D-112-08 34D-122-01 34D-122-08
Size (in.) Inlet x Outlet 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 1/2 IPS 3/8 COMP. x 1/2 IPS 1/2 IPS x 1/2 IPS 1/2 IPS x 1/2 IPS
Finish Bronze Chrome Plated Bronze Chrome Plated Bronze Chrome Plated
Double Outlet Model Number 34D-211-01 34D-211-08 34D-212-01 34D-212-08 34D-222-01 34D-222-08
Size (in.) Inlet x Outlet 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 3/8 COMP. 3/8 COMP. x 1/2 IPS 3/8 COMP. x 1/2 IPS 1/2 IPS x 1/2 IPS 1/2 IPS x 1/2 IPS
Finish Bronze Chrome Plated Bronze Chrome Plated Bronze Chrome Plated
34B Series Scald Protection Mixing Valves 34B Series ASSE 1016 certified mixing valves are designed to be used for individual or multiple fixtures for flow as high as 11 GPM. These valves use a thermostatic element that senses outlet temperature and will compensate for fluctuating inlet temperature and pressure. The mixed water temperature range is 85°-120°F and will hold a desired temperature within +3° or -3°F at all times. The 34B also has an adjustable temperature limit stop to prevent the valve from being set above 120°F. • • • • •
Temperature range (85°-120°F) Stainless steel spring Bronze body Thermoplastic shuttle assembly Threaded or solder connections
Size (in.) 1/2 1/2 3/4 3/4 1 1 1/2 1/2 3/4 3/4 1 1
• • • •
Integrated checks Cold water failure protection Built in temperature limit stop Supply pressures to 125 psig
Connection Sweat Thread Sweat Thread Sweat Thread Sweat/Check Thread/Check Sweat/Check Thread/Check Sweat/Check Thread/Check
Model Number Low Temp. 85˚-120˚ 34B-103-01 34B-103-02 34B-104-01 34B-104-02 34B-105-01 34B-105-02 34B-113-01 34B-113-02 34B-114-01 34B-114-02 34B-115-01 34B-115-02
Mixing Valve Set Thermometer Accurately measures water temperature to help ensure proper settings. Convenient pocket clip holder protects sensing element.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
53
Plumbing and Heating
Pressure Reducing Valves 36 Series
Water Pressure Reducing Valves Controls high water pressure and problem fluctuations. Reduces supply pressures up to 300 psig to more functional range. Factory set at 50 psig; adjusts with turn of a bolt. • No cage screws • Meets ASSE and CSA standards; listed with IAPMO • Built-in by-pass, high-capacity strainer
• • • •
Replaceable cartridge Comes standard with union pipe end Corrosion resistant Available in sizes from 1/2" to 2"
36 - X X X - X X END CONNECTION 1-Single Union NPT x NPT 2-NPT x NPT 3-Single Solder Union x NPT 4-Double Union NPT x NPT 5-Double Union Solder x Solder 6-Single Union Meter x NPT 8-Less Unions 9-Pex x Pex
OPTIONS S-Stainless Trim
SIZE (IN.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 2-2
BODY 0-Standard G-Tapped and Plugged 1/4" NPT P-Tapped and 1/4" NPT 1/4" NPT w/ Pressure Gauge
PRESSURE RANGE 1-25-75 PSIG (Standard) 2-10-35 PSIG 3-75-125 PSIG
36 Series Jump Kits Same rough end dimensions as a PRV but used as a spacer to flush system. Model Number 36-406-JK 36-506-JK
36 Series PRV Flow rate vs. Pressure Fall-Off Note: Flow data is based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All data is for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed.
36 Series Water Capacity (GPM) Pressure Differential (psi) Pipe Size Fall Off (in.) (psi) 25 50 75 1/2 5 1.7 2.0 2.3 10 4.3 5.0 5.8 15 8.5 10.0 11.5 20 15.3 18.0 20.7 3/4 5 3.4 4.0 4.6 10 7.7 9.0 10.4 15 14.5 17.0 19.6 20 22.1 26.0 29.9 1 5 5.1 6.0 6.9 10 11.9 14.0 16.1 15 22.1 26.0 29.9 20 34.0 40.0 46.0 1-1/4 5 8.5 10.0 11.5 10 19.6 23.0 26.5 15 35.7 42.0 48.3 20 52.7 62.0 71.3 1-1/2 5 11.9 14.0 16.1 10 27.2 32.0 36.8 15 47.6 56.0 64.4 20 68.0 80.0 92.0 2 5 15.3 18.0 20.7 10 39.1 46.0 52.9 15 66.3 78.0 89.7 20 93.5 110.0 126.5
54
Contents | Back
36-100 & 36-300 Series Model Numbers Pipe Thread Solder Joint Union x FNPT Union x FNPT 36-103 36-303 36-104 36-304 36-105 36-305 36-106 36-306 36-107 36-307 36-108 36-308 36-200 Series Model Numbers 36-203 36-204 36-205 36-206 36-207 36-208 36-400 & 36-500 Series Model Numbers Double Union Double Union NPT x NPT Solder x Solder 36-403 36-503 36-404 36-504 36-405 36-505 36-406 36-506 36-407 36-507 36-408 36-508 36-800 Series Model Numbers 36-806 36-900 & 36-9C4 Series Model Numbers 36-904 36-9C4
Customer Service 1-704-841-6000
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 1/2 3/4 1 1-1/4 1-1/2 2 Size(in.) 1/2 3/4 1 1-1/4 1-1/2 2
Size(in.) 1-1/4 1-1/4
Description for 36-406 (threaded) for 36-506 (solder)
Dimensions (in.) A B C 6.12 4.62 1.00 6.12 4.62 1.00 6.50 5.12 1.12 8.62 6.37 1.37 8.62 6.62 1.37 11.75 8.44 1.81
Wt./100 (lbs.) 350 340 450 1020 1045 2250
6.12 6.12 6.50 8.62 8.62 11.75
311 305 415 910 909 1880
3.69 3.69 4.06 5.19 5.31 7.12
1.00 1.00 1.12 1.37 1.37 1.81
Dimensions (in.) Wt./100 A B C (lbs.) 6.12 5.81 1.00 389 6.12 5.81 1.00 372 6.50 6.50 1.12 495 8.62 7.69 1.37 1090 8.62 8.00 1.37 1183 11.75 10.06 1.81 2472
1-1/4
8.62
5.81
1.37
910
3/4 3/4
6.12 6.12
5.81 5.81
1.00 1.00
372 372
Prev. Page |
Next
Plumbing and Heating
36C Series
Compact Corrosion Resistant Pressure Reducing Valves Handles supply pressures up to 400 psig; working temperatures to 180°F. All-bronze body, corrosion resistant cage, stainless steel strainer and seat. Meets ASSE and CSA standards; listed with IAPMO. • • • • •
6"
Working temperatures to 180˚F Standard factory setting: 50 PSI Adjusts from 25 to 75 PSI (standard) Designed to meet local plumbing codes Balanced piston design
• Extended control of high pressure conditions using brass adjusting screw • Pipe union, meter union, female NPT or solder-joint connection options
36C* - X 0 X - X X - X END CONNECTION SIZE (IN.) 1-Single Union NPT x NPT (U) 3 - 1/2 2-NPT x NPT (Standard) 4 - 3/4 3-Single Solder Union x NPT (-US) 5 - 1 4-Double Union NPT x NPT (-U2T) 5-Double Union Solder x Solder (-U2S) 6-Single Union Meter x NPT (-UM) 7-90˚ Elbow Meter Union x NPT (-EMT) 8-Less Unions 9-Pex x Pex
A
Length
CLEANOUT 0-Standard G-Tapped and Plugged 1/4 NPT (-GT) P-Tapped and 1/4 NPT w/ Pressure Gauge (-G)
PRESSURE RANGE 1-25-75 PSIG 2-10-35 PSIG (-LP) 3-75-125 PSIG (-HP)
OPTIONS S-Stainless Steel Trim X-Extended Union
Note: Not all variations are available in each size. Check with customer service. * Specify 36B for Bronze Cap
36C Series Jump Kits Same rough end dimensions as a PRV but used as a spacer to flush system. Model Number 36C-404-JK 36C-504-JK 36C-405-JK 36C-505-JK
36C Series PRV Flow rate vs. Pressure Fall-Off Note: Flow curves are based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All curves are for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed.
36C Series Water Capacity (GPM) Pipe Size Fall Off Pressure Differential (psi) (in.) (psi) 25 50 75 1/2 5 1.30 1.50 1.70 10 4.70 5.50 6.30 15 10.60 12.50 14.40 20 15.30 18.00 20.70 3/4 5 2.10 2.50 2.90 10 6.80 8.00 9.20 15 13.20 15.50 17.80 20 18.30 21.50 24.70 1 5 2.80 3.30 3.70 10 8.50 10.00 11.50 15 15.30 18.00 20.70 20 21.30 25.00 28.80
Contents | Back
Size (in.) 3/4 3/4 1 1
Description for 36C-404 (threaded) for 36C-504 (solder) for 36C-405 (threaded) for 36C-505 (solder)
Dimensions (in.) Model Number Part Number Size (in.) Length A NPT Threaded Inlet x Outlet 1/2" 36C 36C-203 1/2 3.50 1.62 36C-204 3/4 3.50 1.62 3/4" 36C 1" 36C 36C-205 1 3.75 1.50 NPT Threaded Union Inlet x NPT Outlet 1/2" 36C-U 36C-103 1/2 4.41 1.62 3/4" 36C-U 36C-104 3/4 4.41 1.62 36C-105 1 4.75 1.50 1" 36C-U Sweat Union Inlet x NPT Outlet 1/2" 36C-US 36C-303 1/2 4.41 1.62 3/4" 36C-US 36C-304 3/4 4.75 1.62 36C-305 1 4.41 1.50 1" 36C-US Double Union/Threaded Inlet x Threaded Inlet 1/2" 36C-U2T 36C-403 1/2 5.37 1.62 3/4" 36C-U2T 36C-404 3/4 5.37 1.62 1" 36C-U2T 36C-405 1 5.87 1.50 Double Union/Sweat Inlet x Sweat Outlet 1/2" 36C-U2S 36C-503 1/2 5.37 1.62 3/4" 36C-U2S 36C-504 3/4 5.37 1.62 1" 36C-U2S 36C-505 1 5.87 1.50 Meter Thread Union Inlet x NPT Outlet 1/2" 36C-UM 36C-603 1/2 4.41 1.62 3/4" 36C-UM 36C-604 3/4 4.41 1.62 1" 36C-UM 36C-605 1 4.75 1.50 90˚ Meter Thread Union Inlet x NPT Outlet 3/4" 36C-EMT 36C-704 1 x 3/4 9.62 1.62 1" 36C-EMT 36C-705 1x1 13.44 1.50 Less Unions 3/4'' 36C-LU 36C-804 3/4 3.50 1.62 36C-805 1 3.75 1.50 1" 36C-LU Double Union/Pex Inlet x Pex Outlet 1/2" 36C-U2P 36C-903 1/2 5.37 1.62 3/4" 36C-U2P 36C-904 3/4 5.37 1.62
Customer Service 1-704-841-6000
Wt./100 (lbs.) 200 200 225 240 240 270 240 240 270 280 280 310 280 280 310 240 240 270 400 580 211 218 280 280
Prev. Page |
Next
55
Plumbing and Heating
36A Series
Pressure Reducing Valves Handles supply pressures up to 400 psig; working temperatures to 180°F. All bronze body, corrosion resistant cage, stainless steel strainer and seat.
A
C
B
56
Contents | Back
Model Number 36A-103 36A-104 36A-105 36A-203 36A-204 36A-205 36A-303 36A-304 36A-305 36A-403 36A-404 36A-405 36A-503 36A-504 36A-505
Size (in.) 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1
Customer Service 1-704-841-6000
A 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12 6.12
Dimensions (in.) B 4.19 4.44 4.81 3.50 3.50 3.75 4.44 4.44 4.81 5.37 5.37 5.87 5.37 5.37 5.87
C 1.69 1.69 1.62 1.69 1.69 1.62 1.69 1.69 1.62 1.69 1.69 1.62 1.69 1.69 1.62
Wt./100 (lbs.) 200 200 225 240 240 270 240 240 280 280 280 310 240 240 280
Prev. Page |
Next
Plumbing and Heating
36H Series
Super Capacity All Bronze Pressure Reducing Valves Available with optional rugged Y strainer for commercial and light industrial applications. Controls supply pressures up to 400 psig. • Designed to meet ASSE and CSA standards; listed with IAPMO • Large yoke-type design aids flow and reduces resistance • Initial pressure up to 400 psig • Maximum temperature 180°F • Integral by-pass relief protects against thermal expansion
• Bronze body and cage, stainless steel replaceable seat • Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2" & 3" NPT - threads (inlet and outlet): 2", 2-1/2" and 3" offered in 150 lb. flange • Bottom access for easy in-line repair • Sealed case • Stainless steel bolts, adjustment screws and spring
36H - X X X - 0 X END CONNECTION 2-NPT x NPT (Standard) 7-Flanged (2"-3" only)
36H Series PRV Flow rate vs. Pressure Fall-Off
SIZE (IN.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 8-2 9 - 2-1/2 0-3
PRESSURE RANGE 1-25-75 PSIG (Standard) 2-10-35 PSIG 3-75-125 PSIG
Note: Not all variations are available in each size. Check with customer service.
Note: Flow data is based on static conditions of: Inlet pressure =100 psig: Outlet pressure = 50 psig. All data is for female NPT versions only. Pressure fall-off is the pressure by which the outlet pressure drops as flow demand is needed.
36 Series Water Capacity (GPM) Pipe Size Fall Off Pressure Differential (psi) (in.) (psi) 25 50 75 1/2 5 8.5 10.0 11.5 10 13.6 16.0 18.4 15 17.9 21.0 24.2 20 21.3 25.0 28.8 3/4 5 10.6 12.5 14.4 10 20.4 24.0 27.6 15 28.1 33.0 38.0 20 34.0 40.0 46.0 1 5 17.0 20.0 23.0 10 29.8 35.0 40.3 15 40.8 48.0 55.2 20 51.0 60.0 69.0 1-1/4 5 21.3 25.0 28.8 10 51.9 61.0 70.2 15 80.8 95.0 109.3 20 106.3 125.0 143.8 1-1/2 5 29.8 35.0 40.3 10 61.5 72.3 83.1 15 90.1 106.0 121.9 20 113.1 133.0 153.0 2 5 55.3 65.0 74.8 10 126.7 149.0 171.4 15 174.3 205.0 235.8 20 231.2 272.0 312.8 2-1/2 5 58.7 69.0 79.4 10 132.6 156.0 179.4 15 200.6 236.0 271.4 20 271.2 319.0 366.9 3 5 80.8 95.0 109.3 10 176.0 207.0 238.1 15 282.5 332.4 382.3 20 365.5 430.0 494.5
Contents | Back
OPTIONS 0-Standard 1-W/Y Strainer
Size (NPT) (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 Flanged 2 2-1/2 3
A 4.12 4.12 4.12 6.75 6.19 8.12 8.12 10.37
B 2.25 2.25 2.31 3.19 3.19 3.50 3.50 3.94
Dimensions (in.) C D 7.00 1.87 7.00 2.44 7.50 4.00 10.00 3.37 10.00 3.87 12.50 4.62 12.50 5.94 15.12 6.94
E 8.37 9.00 10.25 12.50 13.12 16.00 16.69 20.50
Wt. With Wt. Without F Strainer Strainer 4.00 7 6 4.00 8 6 4.69 12 8 6.50 29 24 6.50 29 23 7.62 47 38 7.62 49 37 9.75 87 70
10.37 10.37 12.50
3.50 3.50 3.94
12.50 12.50 15.12
20.00 21.69 24.50
7.62 7.62 9.75
Customer Service 1-704-841-6000
6.25 7.12 8.12
79 105 136
Prev. Page |
49 55 92
Next
57
Plumbing and Heating
W-8078-00 Series
3/4” Hose Thread Pressure Gauges This hose connection pressure gauge includes a high pressure memory indicator that is used for testing water pressure. Temp. range: 50°F to 130°F. Model Number W-8078-00
Wt./100 (lbs.) 46
Pressure Range 0-300 psig
Section IV ASME Hot Water Relief Valves 10 Series
Section IV ASME Hot Water Relief Valves These capacity-certified relief valves protect against excessive water pressure (from thermal expansion) and steam generated when Btu input controls fail. Valves comply with ASME Section IV requirements. Ideal for use with hot water boilers and heating systems. • Pressures from 30 to 150 psig • Stainless steel springs standard except 10-214 • Brass or bronze body available with satin or polished • 10-624/634 are ideal for use in various plumbing syschrome finish tems, commercial boiler applications and swimming • Maximum temperature service: 250°F pool heaters • 10-321 in polished chrome only • 10-418/417 are ideal for use in swimming pool heater • Registered in all Canadian provinces and territories, applications CRN #0G2663.1C
10-102
10-104
Model Number 10-102 10-104 10-214 10-301 10-303 10-321 10-407 10-408 10-417 10-418
Size(in.) Inlet Outlet NPT NPT 3/4 F 1F 3/4 M 1F 1F 1F 3/4 M 3/4 F 3/4 F 3/4 F 3/4 M 3/4 F 3/4 M 3/4 F 3/4 F 3/4 F 3/4 M 3/4 F 3/4 F 3/4 F
Certified Pressure Range PSIG 20-60 20-60 20-65 20-60 20-60 20-60 30 30 20-80 20-80
Height (in.) 3.31 3.75 5.00 3.75 3.31 3.75 3.00 2.75 3.00 2.75
Wt./100 30 (lbs.) PSIG 105 710,000 109 710,000 227 1,000,000 114 550,000 115 550,000 123 425,000 62 535,000 65 535,000 62 477,000 65 477,000
*Certified Capacity 40 50 PSIG PSIG 870,000 1,035,000 870,000 1,035,000 1,210,000 1,450,000 675,000 805,000 675,000 805,000 525,000 625,000 – – 577,000 697,000 577,000 697,000
75 PSIG 972,000 972,000
*National Board Capacity Certified – Btu Per Hour (90% of actual capacity at 10% accumulation) ASME boiler and pressure vessel code – Section IV – Heating Boilers
Certified Size(in.) Pressure *Certified Capacity Model Inlet Outlet Range Height Wt./100 30 75 100 125 150 Number NPT NPT PSIG (in.) (lbs.) PSIG PSIG PSIG PSIG PSIG 10-624 3/4 M 3/4 F 30-150 4.62 106 689,000 1,405,000 1,802,000 2,199,000 2,597,000 10-634 3/4 F 3/4 F 30-150 4.62 106 689,000 1,405,000 1,802,000 2,199,000 2,597,000
10-321
Note: to order add pressure set point to the end of base number (i.e. 10624150=150PSIG)
10-407 & 10-417
10-634
SUFFIX KEY Part Number Pressure PSIG 20 22 25 30 35 40 43 45 50 55 60
Plain Brass -02 -03 -04 -05 -06 -07 -08 -09 -10 -11 -12
Satin Chrome -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51
Polished Chrome -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77
Note: When ordering, specify pressure and finish by adding the two digit suffix after the product number, i.e. 10-102-05: 3/4" FNPT x 1" FNPT at 30 PSIG with plain brass finish.
58
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing and Heating
Section IV ASME High Capacity Relief Valves
10-600 Series
High-capacity heating system valves with female inlet, expanded or standard female outlet. Elevated seat for drainage of water away from seat area. Entire pressure range is National Board capacity certified.
B
• High Btu capacity rating • Silicone seat • Fabric reinforced molded diaphragm isolates spring from water at all times • Bronze body and spring cage • Maximum temperature service 250°F
A D
C
Model Number 10-604 10-614 10-605 10-615 10-606 10-616 10-607 10-617 10-608 10-618
Size(in.) Inlet Outlet NPT NPT 3/4F 3/4F 3/4F 1F 1F 1F 1F 1-1/4F 1-1/4F 1-1/4F 1-1/4F 1-1/2F 1-1/2F 1-1/2F 1-1/2F 2F 2F 2F 2F 2-1/2F
Certified Pressure Range PSIG 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160 15-160
• Registered in Canadian provinces and territories CRN #0G2663.1C • Protects against excessive water pressure due to failure of controls to regulate Btu input • Pressures from 15-160 psig
Wt./100 (lbs.) 232 226 410 390 795 755 1100 1145 2375 2315
A 1.06 1.25 1.25 1.25 1.25 1.25 2.00 2.00 2.19 2.19
Dimensions (in.) B C 5.25 1.62 5.25 1.72 6.69 2.00 6.69 2.00 8.37 2.47 8.37 2.47 10.75 2.75 10.75 2.75 14.00 3.69 14.00 3.66
D 1.56 1.56 2.00 2.00 2.62 2.62 3.12 3.12 3.50 3.50
Use Suffix No. to designate last two digits of Product No. for desired pressure. Other pressure settings available upon request.
17 Series
Pressure PSIG 30 50 75 100 125 150
Suffix Number -05 -10 -15 -20 -25 -34
10-600 Series Discharge Capacities BTU/Hour 3/4 x 3/4 1x1 1-1/4 x 1-1/4 10-604 10-605 10-606 827,000 1,339,000 2,316,000 1,209,000 1,956,000 3,384,000 1,686,000 2,728,000 4,720,000 2,162,000 3,500,000 6,055,000 2,639,000 4,272,000 7,390,000 3,116,000 5,044,000 8,725,000
1-1/2 x 1-1/2 10-607 3,151,000 4,604,000 6,421,000 8,238,000 10,054,000 11,871,000
2x2 10-608 5,193,000 7,589,000 10,583,000 13,577,000 16,571,000 19,565,000
Pressure PSIG 30 50 75 100 125 150
Suffix Number -05 -10 -15 -20 -25 -34
10-610 Series Discharge Capacities BTU/Hour 3/4 x 1 1 x 1-1/4 1-1/4 x 1-1/2 10-614 10-615 10-616 970,000 1,570,000 2,716,000 1,418,000 2,295,000 3,969,000 1,977,000 3,200,000 5,535,000 2,536,000 4,105,000 7,101,000 3,096,000 5,011,000 8,668,000 3,655,000 5,916,000 10,234,000
1-1/2 x 2 10-617 3,696,000 5,400,000 7,531,000 9,661,000 11,792,000 13,923,000
2 x 2-1/2 10-618 6,091,000 8,900,000 12,412,000 15,924,000 19,435,000 22,947,000
Pressure Only Relief Valves Prevents excessive thermal expansion buildup in plumbing systems, tank applications and tankless water heaters. Conforms to HUD/FHA requirements; ideal for well systems. • Bronze body, stainless steel spring • CSA certified design to ANSI Z21.22 “Relief Valves for Hot Water Supply Systems.”
Model Number 17-401 17-402
Size (in.) 1/2 M x 1/2 F 3/4 M x 3/4 F
• ASME capacity certified from 75 to 150 psig. • CRN #0G2663.1C registered in all Canadian provinces and territories
Wt./100 (lbs.) 0.57 0.53
*ASME Certified Discharge Capacities BTU/HR. 75 100 125 150 505,000 648,000 791,000 934,000
Note: When ordering specify pressure by adding the two digit key number after the product number as follows: 75 psig - 01; 100 psig - 02; 125 psig - 03; 150 psig - 04; 160 psig - 05 * National Board Capacity Certified - BTU per hour (90% of actual capacity at 10% accumulation) ASME boiler and pressure vessel code - Section IV - Heating Boilers
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
59
Backflow Preventers
Double Check Valve Assemblies 40-100-T2 Series
Bronze Top Entry T2 Double Check Valve Assembly Designed to protect against backflow from a cross-connection of non-health hazard pollutant. Within the assembly are two mechanically independent, spring-loaded poppet type check valves set in an integral cast bronze body. Both check valves are designed at an inclined angle upward from horizontal centerline of the assembly, and all test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in a pit or tight places. • Top access for testing, repair and maintenance • Corrosion resistant • Low head loss • Interchangeable poppets and springs
• Replaceable seats • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Temperature range 33°F-180°F
40 - 1 X X - TX Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves : ASSE
Size (in.) A B C D E F G Test Cocks Net Weight Shipping Weight
60
Contents | Back
SIZE 4-3/4" 5-1" 6-1-1/4" 7-1-1/2" 8-2"
NON UL CLASSIFIED 1-less ball valves 2-w/ball valves 4-w/union end ball valves FOR UL CLASSIFIED FP1-less ball valves FP2-w/ball valves
(*) Rated flow as determined by USC’s FCCC&HR and design performance standards.
Dimensions (in.) – Weights (lbs.) 3/4 1 1-1/4 1-1/2 2 14.25 14.75 20.75 21.37 23.12 7.25 7.25 12.37 12.37 12.37 4.31 4.31 6.12 6.12 6.12 1.62 1.87 2.19 2.62 3.00 2.44 2.44 3.81 3.81 3.81 5.44 5.44 6.37 6.37 6.37 0.81 0.81 1.37 1.37 1.37 1/8 x 1/4 NPT 1/8 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT 8.80 9.50 23.20 25.70 31.50 10.10 10.80 25.90 28.80 35.50
Customer Service 1-704-841-6000
Prev. Page |
Next
Backflow Preventers
40-100-TC2 Series
Bronze Top Entry TC2 Double Check Valve Assembly SAE threaded hose connections make certification testing fast and trouble-free. It is designed to protect against backflow from a cross-connection of non-health hazard pollutant. Within the assembly are two mechanically independent, spring-loaded poppet type check valves set in an integral cast bronze body. Both check valves are designed at an inclined angle upward from horizontal centerline of the assembly, and all test cocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in a pit or tight places. • Top access for testing, repair and maintenance • Corrosion resistant • Low head loss • Interchangeable poppets and springs
• Replaceable seats • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Temperature range 33°F-180°F
40 - 1 X X - TC2 Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves : ASSE
Size (in.) A B C D E F G Test Cocks Net Wt. Shpg. Wt.
Contents | Back
Customer Service 1-704-841-6000
SIZE (in.) 4 - 3/4 5-1
(*) Rated flow as determined by USC’s FCCC&HR and design performance standards.
Dimensions (in.) – Weights (lbs.) 3/4 13.00 7.25 4.25 1.69 2.44 5.62 1.19 1/8 x 1/4 SAE 8.87 10.12
1 14.75 7.25 4.31 1.87 2.44 5.69 1.87 1/8 x 1/4 SAE 9.50 11.00
Prev. Page |
Next
61
Backflow Preventers
Model DC 4S
Bronze Top Entry Double Check Valve Assemblies The Conbraco Model DC Double Check Valve Backflow Preventer is designed to prevent backflow by either back-pressure or back-siphonage from a cross-connection between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded poppet type check valves in an integral cast bronze body. Four test cocks and two shut-off valves which are quarter-turn, full-port, resilient-seated and ball type complete the assembly. • • • •
Corrosion resistant Easy to install, repair and maintain Low head loss Replaceable check modules
• Comes standard with Apollo® full-port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F
4S - 1 0 X - A X SIZE 3 - 1/2"
BALL VALVES 1 -less ball valves 2 -w/ ball valves 4 -w/ union end ball valves
Flow Curves :
Dimensions (in.) – Weights (lbs.) Size (in.) A (w/o Ball Valves) B C D E F Net Wt. (w/o Ball Valves) Net Wt. (with Ball Valves) Shpg. Wt. (w/o Ball Valves) Shpg. Wt. (with Ball Valves)
62
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
1/2 5.62 9.75 4.50 3.50 1.00 3.62 2.68 4.38 3.80 5.10
Next
Backflow Preventers
Model DC 4S
Epoxy Coated Ductile Iron Top Entry Double Check Valve Assembly The Conbraco Model DC Double Check Valve Backflow Preventer is designed to control crossconnections between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded swing type check valves in a corrosion resistant ductile iron body. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the check valve body and one on the inlet shut-off valve, complete the assembly.
Sizes 2-1/2", 3", 4", 6"
• • • • • •
Patent # 5,711,341 Corrosion resistant Replaceable discs Low head loss Economical Short lay length
• • • • •
Lightweight Designed for easy maintenance Check valve assemblies interchangeable Maximum working pressure 175 psig Operating temperature range 33°F-140°F
4S - 1 X X - 0 X U Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
SIZE (in.) 9 - 2-1/2 0-3 A-4 C-6
Flow Curves :
2-1/2 " – 6" Contents | Back
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 2-1/2 3 A 32.12 33.12 B 17.00 17.00 C NRS 14.87 16.12 C (OS&Y) OPEN 19.87 22.62 D NRS 11.37 12.37 D (OS&Y) OPEN 16.37 18.87 E 09.62 10.37 F 07.00 07.50 G 34.62 38.12 H 19.87 20.87 Net Wt. (Less Gate Valves) 58.00 60.00 Net Wt. (With NRS Valves) 153.00 186.00 Net Wt. (With OS&Y Valves) 164.00 194.00 Net Wt. (With NRS Valves & Elbows) 189.00 237.00 Net Wt. (With OS&Y Valves & Elbows) 200.00 245.00 Net Wt. (With Ball Valves) 126.00 136.00 Net Wt. (With Post Indicator) 188.00 214.00 Shpg. Wt. (Less Gate Valves) 64.00 66.00 Shpg. Wt. (With NRS Valves) 221.00 254.00 Shpg. Wt. (With OS&Y Valves) 231.00 261.00 Shpg. Wt. (With NRS Valves & Elbows) 257.00 305.00 Shpg. Wt. (With OS&Y Valves & Elbows) 267.00 312.00 Shpg. Wt. (With Ball Valves) 193.00 203.00 Shpg. Wt. (With Post Indicator) 255.00 281.00
Customer Service 1-704-841-6000
FLOW U - U-Flow
VALVES 1 -less gate valves 2 -w/ NRS gate valves 3 -w/ OS&Y gate valves 5 -w/ Epoxy coated ball valves 6 -w/ OS&Y gate valve on inlet, NRS gate valve w/ post plate and nut on outlet 7-w/ Flanged inlet x Grooved outlet 8 -w/ Grooved x Grooved OS&Y gate valves
4 34.62 16.50 19.25 27.25 14.75 22.75 11.87 09.00 39.62 22.87 68.00 254.00 266.00 339.00 351.00 184.00 281.00 74.00 324.00 338.00 409.00 423.00 254.00 353.00
6 39.12 18.00 24.50 35.62 19.00 30.12 14.62 11.00 46.12 26.12 80.00 376.00 392.00 511.00 527.00 388.00 404.00 086.00 484.00 502.00 619.00 637.00 498.00 514.00
Prev. Page |
Next
63
Backflow Preventers
Model DC 4S
Epoxy Coated Ductile Iron Top Entry Double Check Valve Assembly The Conbraco Model DC Double Check Valve Backflow Preventer is designed to control crossconnections between potable water lines and substances that are objectionable, but not a health hazard. It is an economical device that is easily repaired in the line. The device consists of two independently acting, spring-loaded swing type check valves in a corrosion resistant ductile iron body. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the check valve body and one on the inlet shut-off valve, complete the assembly.
Sizes 8", 10"
• • • • • •
Patent #6343618 Replaceable discs Corrosion resistant Economical Low head loss Lightweight
• • • • •
Short lay length Designed for easy maintenance Check valve assemblies interchangeable Maximum working pressure 175 psig Operating temperature range 33°F140°F
4S - 1 X X - 0 X X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
SIZE (in.) E-8 G - 10
VALVES 1 -less gate valves 2 -w/ NRS gate valves 3 -w/ OS&Y gate valves 5 -w/ Epoxy coated ball valves 6 -w/ OS&Y gate valve on inlet, NRS gate valve w/ post plate and nut on outlet 7-w/ Flanged inlet x Grooved outlet (OS&Y)* 8 -w/ Grooved x Grooved OS&Y gate valves*
FLOW U - U-Flow
*Gate valve options not available in 10" size.
Flow Curves :
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 8 A 50.12 B 27.00 C NRS 22.50 C (OS&Y) OPEN 37.75 D 17.00 E 13.50 F 45.12 G 35.00 H N/A Test Cocks 3/4 NPT Net Wt. (Less Gate Valves) 420.00 Net Wt. (With NRS Valves) 856.00 Net Wt. (With OS&Y Valves) 920.00 Net Wt. (With NRS Valves & Elbows) 1085.00 Net Wt. (With OS&Y Valves & Elbows) 1148.00 Net Wt. (With Ball Valves) 1105.00 Net Wt. (With Post Indicator) 911.00 Shpg. Wt. (Less Gate Valves) 510.00 Shpg. Wt. (With NRS Valves) 936.00 Shpg. Wt. (With OS&Y Valves) 1164.00 Shpg. Wt. (With NRS Valves & Elbows) 1026.00 Shpg. Wt. (With OS&Y Valves & Elbows) 1254.00 Shpg. Wt. (With Ball Valves) 1224.00 Shpg. Wt. (With Post Indicator) 1017.00
8" – 10"
64
Contents | Back
Customer Service 1-704-841-6000
10 55.62 29.50 26.50 45.75 19.50 16.00 51.62 38.25 N/A 3/4 NPT 470.00 1175.00 1320.00 1548.00 1693.00 N/A 1280.00 565.00 1265.00 1638.00 1420.00 1793.00 N/A 1390.00
Prev. Page |
Next
Backflow Preventers
Reduced Pressure Principle Devices 40-200-TC2 Series
Bronze Reduced Pressure Principle SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to give maximum protection against backflow caused by either backpressure or back-siphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consists of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. • Maximum protection against back-pressure/back-siphonage • Removable discs • Internal sensing passage • Designed for easy maintenance • Low head loss • Economical
• Corrosion resistant • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Replaceable seats
40 - 2 X X - TC2 Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves :
SIZE (in.) 4 - 3/4 5-1
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 3/4 A 13.75 B (w/o Ball Valves) 8.00 C 9.87 D 4.06 E 4.62 F 5.12 Test Cocks 1/8x1/4 SAE Net Wt. (w/o Ball Valves) 11.50 Net Wt. (w/ Ball Valves) 14.00 Shpg. Wt. (w/o Ball Valves) 12.50 Shpg. Wt. (w/ Ball Valves) 15.00
Contents | Back
Customer Service 1-704-841-6000
1 15.37 8.00 9.87 4.06 4.62 5.12 1/8x1/4 SAE 11.00 14.50 12.00 15.50
Prev. Page |
Next
65
Backflow Preventers
40-200-T2 Series
Bronze Reduced Pressure Principle Designed to give maximum protection against backflow caused by either back-pressure or backsiphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consists of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. Three of the testcocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in tight places. • Maximum protection against back-pressure/back-siphonage • Removable discs • Internal sensing passage • Designed for easy maintenance • Low head loss • Economical
Flow Curves :
• Corrosion resistant • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F • Replaceable seats
40 - 2 X X - TX
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Size (in.) A B (w/o Ball Valves) C D E F Test Cocks Net Wt. (w/o Ball Valves) Net Wt. (w/ Ball Valves) Shpg. Wt. (w/o Ball Valves) Shpg. Wt. (w/ Ball Valves)
66
Contents | Back
1/4 10.19 5.75 6.87 2.62 3.12 3.75 1/8x1/4NPT
5.70 7.00 6.60 7.90
Dimensions (in.) – Weights (lbs.) 3/8 1/2 3/4 10.25 10.75 13.75 5.75 5.75 8.00 6.87 6.87 9.75 2.62 2.62 4.06 3.12 3.12 4.50 3.75 3.75 5.12
1 15.37 8.00 9.75 4.06 4.50 5.12
SIZE (in.) 1-1/4 2-3/8 3-1/2 4-3/4 5-1 6-1-1/4 7-1-1/2 8-2
1-1/4 17.50 11.00 12.62 5.37 5.69 7.12
NON UL CLASSIFIED 1-less ball valves 2-w/ball valves 4-w/union end ball valves FOR UL CLASSIFIED (3/4"-2") FP1-Less ball valves FP2-w/ball valves
1-1/2 19.50 11.00 12.62 5.37 5.69 7.12
1/8x1/4NPT 1/8x1/4NPT 1/8x1/4NPT 1/8x1/4NPT 1/4x1/4NPT 1/4x1/4NPT
5.70 7.00 6.60 7.90
Customer Service 1-704-841-6000
5.10 7.40 6.00 8.30
11.50 14.00 12.50 15.00
11.00 14.50 12.00 15.50
30.50 35.50 32.50 38.00
2 21.50 11.00 12.62 5.37 5.69 7.12 1/4x1/4NPT
27.50 37.00 29.00 39.00
Prev. Page |
27.00 39.50 29.00 41.00
Next
Backflow Preventers
40-200-T2S Series
STAINLESS STEEL : T2S Reduced Pressure Backflow Preventer Maximum protection against backflow caused by either back-pressure or back-siphonage from a cross-connection wherein a contaminant hazard exists (i.e. a health hazard), or a pollutant hazard exists (i.e. a non-hazard). The assembly is composed of two spring-loaded poppet type check valves and a mechanically independent, hydraulically dependent pressure differential relief valve set in an integral stainless steel body. Three of the testcocks are mounted at the top to assure easy access during repair and maintenance when unit is installed in tight places. • • • • • •
Stainless steel body and covers Easy to install and repair Internal sensing passage Low head loss Removable seat discs Replaceable seats
• Comes standard with Apollo® stainless steel full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Temperature range 33°F-180°F
40 - 20 X - T2S SIZE (in.) 1-1/4 2-3/8 3-1/2 4-3/4 5-1
Flow Curves :
FOR UL CLASSIFIED (3/4" AND 1") FP1S-less ball valves FP2S-w/ball valves
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 1/4 3/8 1/2 3/4 1 A 10.50 10.50 10.50 13.50 15.25 B 5.75 5.75 5.75 7.94 7.94 C 6.87 6.87 6.87 9.00 9.00 D 2.62 2.62 2.62 4.06 4.06 E 3.19 3.19 3.19 4.37 4.37 F 3.75 3.75 3.75 5.12 5.12 Test Cocks 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT 1/8 x 1/4NPT Net Wt. (w/o Ball Valves) 4.25 4.25 4.12 8.25 8.12 Net Wt. (with Ball Valves) 5.50 5.50 5.37 10.75 11.00 Shpg. Wt. (w/o Ball Valves) 5.12 5.12 5.00 9.75 9.62 Shpg. Wt. (with Ball Valves) 6.37 6.37 6.25 12.25 12.75
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
67
Backflow Preventers
40-200-TCU Series
Bronze TCU U Flow Reduced Pressure Principle SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to give maximum protection against backflow caused by either back-pressure or back-siphonage. The durable, but economical, device is easily maintained in the line without any special tools. It consist of two independently acting spring-loaded check valves with an automatic differential relief valve located between the check valves. The diaphragm and the sensing passage are built into the all bronze body to eliminate possible damage. The assembly offers installation flexibility by providing inlet and outlet bronze elbows to meet space requirements, adaptability and lower installation cost. • Maximum protection against backpressure/back-siphonage • Designed for easy maintenance • Economical • Compact • Internal sensing passage • Low head loss
• Removable seat discs • Replaceable seats • Comes standard with Apollo® full port ball valves with stainless steel handles • Maximum working pressure 175 psig • Operating temperature range 33°F-180°F
40 - 2 0 X - TCU SIZE (in.) 4 - 3/4 5-1
Flow Curves :
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 3/4 A 10.50 B 8.00 C 4.12 D 4.44 E 13.87 F 4.50 G 5.12 Test Cocks 1/8 x 1/4 SAE Net Wt. (with Ball Valves) 14.70 Shipping Wt. (with Ball Valves) 15.70
68
Contents | Back
Customer Service 1-704-841-6000
1 10.69 8.00 5.19 4.56 15.12 4.50 5.12 1/8 x 1/4 SAE 15.60 16.60
Prev. Page |
Next
Backflow Preventers
40-200 Series
Epoxy Coated Ductile Iron Reduced Pressure Principle The Conbraco Series 40-200 Reduced Pressure Backflow Preventer consists of two independently acting, spring-loaded check valves with a differential pressure relief valve located between the check valves. The all bronze relief valve module is easily removed from the ductile iron check valve body. Pressure sensing passages are built into the bronze relief valve module to prevent possible damage from mishandling or vandalism. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the backflow preventer valve body and one on the inlet shut-off valve, complete the assembly.
Sizes 2-1/2", 3", 4"
• Maximum protection against back-pressure/back-siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage • Designed for easy maintenance
• • • • •
Low head loss Economical Corrosion resistant Maximum working pressure 175 psig Operating temperature range 33°F 140°F
40 - 2 X X - 0 X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves :
SIZE (in.) 9 - 2-1/2 0-3 A-4
VALVES 1-less gate valves 2-w/ NRS gate valves 3-w/OS&Y gate valves 5-w/Epoxy coated ball valves
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 2-1/2 3 4 A 37.06 38.06 46.75 B 22.06 22.06 28.50 C NRS 20.87 21.87 25.19 C OS&Y (OPEN) 25.87 28.37 33.19 D NRS 11.37 12.37 14.75 D OS&Y (OPEN) 16.37 18.87 22.75 E 9.50 9.50 10.44 F 9.62 10.37 11.87 G 7.00 7.50 09.00 Test Cocks 1/2 x 1/2 NPT 1/2 x 1/2 NPT 1/2 x 1/2 NPT Net Wt. (Less Gate Valves) 120.00 122.00 196.00 Net Wt. (With NRS Valves) 219.00 252.00 388.00 Net Wt. (With OS&Y Valves) 229.00 259.00 402.00 Net Wt. (With Ball Valves) 188.00 198.00 312.00 Shpg. Wt. (Less gate Valves) 184.00 186.00 260.00 Shpg. Wt. (With NRS Valves) 283.00 316.00 452.00 Shpg. Wt. (With OS&Y Valves) 293.00 323.00 466.00 Shpg. Wt. (With Ball Valves) 252.00 262.00 376.00
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
69
Backflow Preventers
40-200 Series
Epoxy Coated Ductile Iron Reduced Pressure Principle The Conbraco Series 40-200 Reduced Pressure Backflow Preventer consists of two independently acting, spring-loaded check valves with a differential pressure relief valve located between the check valves. The relief valve module is easily removed from the ductile iron check valve body. Pressure sensing passages are built into the relief valve module to prevent possible damage from mishandling or vandalism. The unit is available with inlet and outlet shut-off valves. Four test cocks, three on the backflow preventer valve body and one on the inlet shut-off valve, complete the assembly.
Sizes 6", 8", 10"
• Maximum protection against backpressure/back-siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage • Designed for easy maintenance
• • • • •
Low head loss Economical Corrosion resistant Maximum working pressure 175 psig Operating temperature range 33°F-140°F
40 - 2 X X - 0 X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves :
SIZE (in.) C-6 E-8 G - 10
VALVES 1-less gate valves 2-w/ NRS gate valves 3-w/OS&Y gate valves 5-w/Epoxy coated ball valves
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 6 8 10 A 63.00 75.00 88.25 B 42.00 52.00 62.06 C NRS 30.50 38.50 44.00 C OS&Y (OPEN) 41.62 53.75 63.25 D NRS 19.00 22.50 26.50 D OS&Y (OPEN) 30.12 37.75 45.75 E 11.50 16.00 17.50 F 14.62 16.75 19.25 G 11.00 13.50 16.00 Test Cocks 3/4 x 3/4 NPT 3/4 x 3/4 NPT 3/4 x 3/4 NPT Net Wt. (Less Gate Valves) 430.00 715.00 1443.00 Net Wt. (With NRS Valves) 736.00 1155.00 2148.00 Net Wt. (With OS&Y Valves) 754.00 1210.00 2286.00 Net Wt. (With Ball Valves) 666.00 N/A N/A Shpg. Wt. (Less gate Valves) 528.00 885.00 1613.00 Shpg. Wt. (With NRS Valves) 872.00 1335.00 2364.00 Shpg. Wt. (With OS&Y Valves) 890.00 1390.00 2502.00 Shpg. Wt. (With Ball Valves) 836.00 N/A N/A
70
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Backflow Preventers
Epoxy Coated Ductile Iron Model RP : Reduced Pressure Principle
Model RP 4S
The Conbraco Model RP Reduced Pressure Principle Backflow Preventer is designed to give maximum protection against backflow caused by either back-pressure or back-siphonage. The unit consists of two independently acting, spring-loaded swing-check valves with a differential pressure relief valve located between the checks. The all-bronze relief valve assembly can be easily removed from the compact ductile iron check valve body. The pressure sensing passage is hard piped to prevent possible damage from mishandling or vandalism. The unit is available with inlet and outlet shut-off valves. Ninety-degree elbows are also available within the shut-off valve envelope for compact installations. Four test cocks, three on the backflow preventer body and one on the inlet shut-off valve, complete the assembly.
Sizes 6", 8", 10"
• • • • • •
Corrosion resistant Replaceable EPDM seat discs Low head loss Economical Short lay length Light weight
• • • • •
Damage resistant sensing passage Designed for easy maintenance Maximum working pressure 175 psi Operating temperature range 33°F-140°F Patent #6,343,618
4S - 2 X X - 0 X X Y-STRAINER 0-Standard 1-w/ Y-strainer (shipped loose)
Flow Curves :
SIZE (in.) C-6 E-8 G - 10
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
VALVES 1 -less gate valves U-U Flow 2 -w/ NRS gate valves Z-Z Flow 3 -w/ OS&Y gate valves 5 -w/ Epoxy coated ball valves 6 -w/ OS&Y gate valve on inlet, NRS gate valve w/ post plate and nut on outlet 7-w/Flanged inlet x Grooved outlet 8 -w/Grooved x Grooved OS&Y gate valves
*Note: Gate valve options 7 and 8 not available on 10" size.
Dimensions (in.) – Weights (lbs.) Size (in.) 6 8 A 42.62 52.62 B 21.50 29.50 C (NRS) 19.00 22.50 C (OS&Y) OPEN 30.12 37.75 D 10.75 15.00 E 16.00 16.75 F 11.00 13.50 G 37.62 47.62 H 50.00 61.62 I 30.75 37.00 J 38.00 41.00 Test Cocks 3/4 NPT 3/4 NPT Net Wt. (Less Gate Valves) 186.00 558.00 Net. Wt. (w/NRS Valves) 482.00 984.00 Net. Wt. (w/OS&Y Valves) 498.00 1074.00 Shpg. Wt. (Less Gate Valves) 284.00 638.00 Shpg. Wt. (w/NRS Valves) 590.00 1094.00 Shpg. Wt. (w/OS&Y Valves) 608.00 1184.00
10 55.62 29.50 26.50 45.75 15.00 19.25 16.00 51.62 68.12 41.87 49.37 3/4 NPT 585.00 1290.00 1428.00 665.00 1400.00 1538.00
Weights are without elbows.
6" – 10"
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
71
Backflow Preventers
Dual Check Valve 40-300 Series
Dual Check Valve Prevents cross connections of non-potable, low hazard water into the potable drinking water system. In-line testable and maintainable. Compact and lightweight. • • • •
Approved under ASSE & CSA Sizes: 1/2", 3/4", 1" Working pressure to 175 psig Many inlet/outlet connection combinations available
• • • •
Corrosion resistant Independently acting check valves Easy to install, maintain and repair Operating temperature 33°F to 180°F
40 - 3 X X - X X X INLET CONNECTION INLET AND OUTLET SIZE (in.) A – FNPT 3 – 1/2 B – MNPT 4 – 3/4 C – Female Meter Thread 5–1 E – Male Meter Thread S – Female Meter Thread (Swivel) 2 – Female BSPP
OUTLET CONNECTION A – FNPT B – MNPT C – Female Meter Thread E – Male Meter Thread F – Female BSPP
On meter threads order one size larger than meter size
Flow Curves :
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 1/2 3/4 A 4.37 4.37 B 3.50 3.50 C 1.50 1.50 D 1.69 1.69 Test Port Size 1/8 NPT 1/8 NPT Unit Wt. (with plugs) 2.00 2.00 Unit Wt. (with test cocks) 2.40 2.40 Unit Wt. (with T.C.’s & Ball Valves) 4.00 4.60 Unit Wt. (with T.C.’s & Outlet Ball Valve) 3.20 3.40
72
Contents | Back
Customer Service 1-704-841-6000
TEST COCKS 1 – With Test Cocks 2 – With Test Cocks & Ball Valves 3 – With Test Cocks & Outlet Ball Valve 4 – With 4 Test Cocks & Inlet & Outlet Ball Valves
1 4.37 3.50 1.50 1.69 1/8 NPT 2.10 2.50 6.40 4.40
Prev. Page |
Next
Backflow Preventers
Model CBBP 4C-100 Series
Carbonated Beverage Backflow Preventer The device consists of two independently acting check valves biased to a normally closed position. A normally open atmospheric port is located between the check valves. During backflow conditions, the port vents gases and/or liquids. Additionally, the CBBP is equipped with a 100 mesh integral strainer screen at the inlet. All wetted areas of the device are non-toxic, corrosion resistant, and approved for use with potable water. The CBBP is suitable for supply pressures to 150 psig and water temperatures from 33˚ to 130˚ F. • Compact Design • Lowest head loss • Atmospheric vent provides indication of problems
• • • •
Integral strainer for equipment protection Repairable check assemblies Non-metallic body for corrosion resistance Certified to NSF-61 and NSF-18 listed
4C - 1 0 X - 0 1 SIZE (in.) 1 – 1/4 2 – 3/8
Flow Curves :
Contents | Back
Customer Service 1-704-841-6000
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Prev. Page |
Next
73
Backflow Preventers
Model SVB 4W-500 Series
Spill Resistant Vacuum Breakers The spill-resistant pressure vacuum breaker (SVB) is designed to prevent contamination of potable water due to back-siphonage and ideally suited for indoor and OEM applications supplied with continuous pressure. • • • • •
Corrosion resistant In-line flow Integral shut-off valves Designed for easy maintenance Low head loss
• • • •
Economical Maximum working pressure 150 PSIG Operating temperature range 33˚F-180˚F Approved under ASSE 1056, CSA, and USC FCCC & HR
4W - 5 0 X - 0 2 SIZE (in.) 1 – 1/4 2 – 3/8 3 – 1/2
Flow Curves :
Size (in.) Test Cock Net Wt. Shipping Wt.
74
Contents | Back
Customer Service 1-704-841-6000
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) 1/4 3/8 1/4 Flare 1/4 Flare 1.16 1.16 1.26 1.26
1/2 1/4 Flare 1.16 1.26
Prev. Page |
Next
Backflow Preventers
Continuous Pressure Backflow Preventer 40-400 Series
Continuous Pressure Backflow Preventer Protects residential and commercial water supply lines from back-siphonage or back-pressure of non-potable substances. Suitable for hot or cold water service. Low head loss. • • • • •
Approved under ASSE & CSA Maximum working pressure: 175 psig Independently acting check valves Sizes 1/2" and 3/4" Corrosion resistant
• • • •
Economical Durable Easy to install, maintain and repair Operating temperature: 33˚F to 210˚F
40 - 4 X X - X X M Dimensions (in.) – Weights (lbs.) Size (in.) 1/2, 3/4 A 5.00 B 2.94 C 2.62 Unit Weight 1.90
INLET CONNECTION A – FNPT H – Solder joint 2 – Female BSPP
INLET AND OUTLET SIZE (in.) 3 – 1/2 4 – 3/4
Flow Curves :
OUTLET CONNECTION A – FNPT B – MNPT F – Female BSPP H – Solder joint
(*) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
(• 1/2" = 10 GPM)
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
75
Backflow Preventers
Pressure Vacuum Breakers 4V-500 Series
Freeze Resistant Vacuum Breakers Protects and enhances the performance of irrigation systems in even the coldest conditions. Designed with plastic float and integral relief valve that vents automatically. Bottom test cock assures easy draining. • • • •
Replaceable check valve cartridge Apollo® ball valves standard 150 psig maximum working pressure Comes standard with Apollo full port valves with stainless steel handles
• Temperature range 33˚F to 180˚F • ASSE 1020, CSA B64.1.2 and USC FCCC & HR approved
4V - 5 0 X - 0 X SIZE (in.) 3 - 1/2 4 - 3/4 5-1 6 - 1-1/4 7 - 1-1/2 8-2
Size (in.) A B (Less Ball Valves) C D E F (Less Ball Valves) Test Cocks Net Wt. (Less Ball Valves) Net. Wt. (With Ball Valves) Shipping Wt. (Less Ball Valves) Shipping Wt. (With Ball Valves)
76
Contents | Back
BALL VALVES 1-less ball valves 2-w/ ball valves 4-w/ union end ball valves
Dimensions (in.) – Weights (lbs.) 1/2 3/4 1 1-1/4 1-1/2 2 3.00 3.00 3.00 3.75 3.75 5.25 4.75 4.75 4.75 5.37 5.37 6.62 6.37 7.12 7.50 8.75 9.25 10.25 7.12 7.62 8.37 10.62 10.87 12.12 4.62 5.12 5.87 7.37 7.37 7.12 5.37 5.37 5.37 6.87 7.25 8.62 1/8 x 1/4 NPT 1/8 x 1/4 NPT1/8 x 1/4 NPT 1/4 x 1/4 NPT 1/4 x 1/4 NPT1/4 x 1/4 NPT 2.20 2.20 2.20 4.30 4.30 8.80 3.40 3.90 5.30 9.30 12.20 23.30 3.20 3.20 3.00 5.60 5.80 10.30 4.40 4.90 6.30 10.50 13.70 24.80
Customer Service 1-704-841-6000
Prev. Page |
Next
Backflow Preventers
4V-500-TC2 Series
Pressure Vacuum Breakers SAE threaded hose connections make certification testing fast and trouble-free, especially in tight installations. It is designed to prevent contamination of the potable water supply due to back-siphonage. The PVB is ideally suited for continuous pressure, outdoor applications such as irrigation equipment, livestock watering systems, swimming pools, etc. The device consists of a unique one piece cap/float assembly and independently acting check valve, all attractively packaged in a rugged yet compact bronze body. All components are made of corrosion resistant materials, guaranteeing years of reliable service. • Removable integral check valve • One piece cap/float assembly • Built-in freeze relief valve in cap/float assembly • Comes standard with Apollo® full port valves with stainless steel handles
• • • •
Corrosion resistant construction Maximum working pressure 150 psig Operating temperature range 33°F-180°F Easy maintenance
4V - 5 0 X - TC2 SIZE (in.) 4-3/4 5-1
Dimensions (in.) – Weights (lbs.) Size (in.) 3/4 A 3.00 B (less ball valve) 4.75 C 7.31 D 7.62 E 5.12 F (less ball valves) 5.37 Test Cocks 1/8 x 1/4 SAE Net Wt. (Less Ball Valves) 2.20 Net Wt. (With Ball Valves) 3.90 Shpg. Wt. (Less Ball Valves) 3.20 Shpg. Wt. (With Ball Valves) 4.90
Contents | Back
Customer Service 1-704-841-6000
1 3.00 4.75 8.06 8.37 5.87 5.37 1/8 x 1/4 SAE 2.00 5.30 3.00 6.30
Prev. Page |
Next
77
Backflow Preventers
Model DCDA 4S
Double Check Detector Assembly The Conbraco Model DCDA Double Check Detector Assembly is designed to provide double check protection against cross-connection of non-potable (non-hazardous) water into the safe drinking water system; and at the same time offers precise monitoring capability to detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The unit consists of two independently acting, spring loaded check valves with inlet and outlet resilient wedge gate valves and a by-pass assembly consisting of a water meter, double check valve assembly with shut-off valves and test cocks. • • • • • •
US Patent 5,711,341 Corrosion Resistant Replaceable Discs Low Head Loss Economical Short Lay Length
• • • • •
Light Weight Designed For Easy Maintenance Check Valve Assemblies Interchangeable Maximum Working Pressure 175 PSI Operating Temperature Range 33˚F-140˚F
Sizes 2 1/2", 3", 4", 6"
4S - 6 0 X - X X X SIZE (in.) 9 – 2-1/2 0–3 A–4 C–6
Flow Curves :
METER C — With meter in cubic feet E — With meter in gallons G — Less water meter
(•) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves 6 — With post indicator 7 — W/ Flanged inlet x Grooved outlet* 8 — w/Grooved x Grooved OS&Y gate valves*
Dimensions (in.) – Weights (lbs.) Size (in.) 2-1/2 3 4 A 32.12 33.12 34.62 B 17.00 17.00 16.50 C (OS&Y OPEN) 16.37 18.87 22.75 D 3.50 3.75 4.50 E 9.00 9.00 9.00 F 27.12 28.12 29.62 G 22.00 23.00 25.00 Test Cocks (Mainline) 1/2 NPT 1/2 NPT 1/2 NPT Test Cocks (Bypass) 1/4 NPT 1/4 NPT 1/4 NPT Net. Wt. (Less Gate Valves) 70.00 75.00 83.00 Net. Wt. (w/OS&Y Valves) 176.00 206.00 278.00 257.00 362.00 Net. Wt. (w/Elbows & OS&Y Valves) 212.00 Net. Wt. (w/Post Indicator) 200.00 226.00 293.00 Shpg. Wt. (Less Gate Valves) 123.00 128.00 136.00 Shpg. Wt. (w/OS&Y Valves) 243.00 273.00 350.00 Shpg. Wt. (w/Elbows & OS&Y Valves) 279.00 324.00 434.00 Shpg. Wt. (w/Post Indicator) 267.00 293.00 365.00
78
Contents | Back
Customer Service 1-704-841-6000
FLOW U – U-Flow
6 39.12 18.00 30.12 5.50 9.00 34.12 29.00 3/4 NPT 1/4 NPT 92.00 404.00 539.00 416.00 145.00 514.00 649.00 526.00
Prev. Page |
Next
Backflow Preventers
Model DCDA 4S
Double Check Detector Assembly The Conbraco Model DCDA Double Check Detector Assembly is designed to provide double check protection against cross-connection of non-potable (non-hazardous) water into the safe drinking water system; and at the same time offers precise monitoring capability to detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The unit consists of two independently acting, spring loaded check valves with inlet and outlet resilient wedge gate valves and a by-pass assembly consisting of a water meter, double check valve assembly with shut-off valves and test cocks.
Sizes 8", 10"
• • • • • •
US Patent #6,343,618 Corrosion Resistant Replaceable Discs Low Head Loss Economical Short Lay Length
• • • • •
Light Weight Designed For Easy Maintenance Check Valve Assemblies Interchangeable Maximum Working Pressure 175 PSI Operating Temperature Range 33˚F-140˚F
4S - 6 0 X - X X X SIZE (in.) E–8 G – 10
Flow Curves :
(•) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
METER C — With meter in cubic feet E — With meter in gallons G — Less water meter
GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves 6 — With post indicator 7 — W/ Flanged inlet x Grooved outlet* 8 — w/Grooved x Grooved OS&Y gate valves*
FLOW U – U-Flow
*Note: Gate Valve options 7 & 8 not available in 10” size.
Dimensions (in.) – Weights (lbs.) Size (in.) 8 10 A 50.12 55.62 B 27.00 29.50 C (NRS) 22.50 26.50 C (OS&Y OPEN) 37.75 45.75 D 6.75 8.00 E 10.75 10.75 F 45.12 51.50 G 34.75 39.50 H 10.12 11.50 Test Cocks (Mainline) 3/4 NPT 3/4 NPT Test Cocks (Bypass) 1/4 NPT 1/4 NPT Net. Wt. (Less Gate Valves) 440.00 490.00 Net. Wt. (w/OS&Y Valves) 940.00 1340.00 Net. Wt. (w/Elbows & OS&Y Valves) 1169.00 1714.00 Net. Wt. (w/Post Indicator) 920.00 1277.00 Shpg. Wt. (Less Gate Valves) 530.00 585.00 Shpg. Wt. (w/OS&Y Valves) 1046.00 1440.00 Shpg. Wt. (w/Elbows & OS&Y Valves) 1275.00 1814.00 Shpg. Wt. (w/Post Indicator) 1026.00 1377.00
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
79
Backflow Preventers
Reduced Pressure Detector Assembly 40-700 Series
Reduced Pressure Detector Assembly The Conbraco Series 40-700 Reduced Pressure Detector Assembly is designed to provide reduced pressure principle protection against cross-connections that present a health hazard, and at the same time detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The mainline unit consists of two independent spring-loaded, poppet type check valve assemblies with a diaphragm actuated and spring-loaded, relief valve assembly located between check valves. Two resilient wedge gate valves and four test cocks complete the mainline unit. The by-pass consists of an approved reduced pressure assembly, four test cocks, two shut-off valves and a water meter.
Sizes 3", 4"
• Maximum protection against back-pressure/back-siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage
• Corrosion resistant • Easy in-line maintenance and testing • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F
40 - 7 0 X - X X SIZE (in.) 0—3 A—4
METER C — With meter in cubic feet E — With meter in gallons G — Less water meter
Flow Curves :
GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves
(•) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 3 4 A 38.06 46.75 B 22.06 28.50 C (OS&Y) OPEN 18.87 22.75 D 3.75 4.50 E (OS&Y) OPEN 28.37 33.19 F 9.25 10.50 G 3.75 4.50 Test cocks (line) 1/2" NPT 1/2" NPT Test cocks (by-pass) 1/4" NPT 1/4" NPT Net Wt. (less gate valves) 145.00 217.00 Net Wt. (with 0S&Y valves) 282.00 423.00 Shipping Wt. (less gate valves) 209.00 281.00 346.00 487.00 Shipping Wt. (with OS&Y valves)
80
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Backflow Preventers
40-700 Series
Reduced Pressure Detector Assembly The Conbraco Series 40-700 Reduced Pressure Detector Assembly is designed to provide reduced pressure principle protection against cross-connections that present a health hazard, and at the same time detect leakage or unauthorized use of water from fire or automatic sprinkler systems. The mainline unit consists of two independent spring-loaded, poppet type check valve assemblies with a diaphragm actuated and spring-loaded assembly located between check valves. Two resilient wedge gate valves and four test cocks complete the mainline unit. The by-pass consists of an approved reduced pressure assembly, four test cocks, two shut-off valves and a water meter.
Sizes 6", 10"
• Maximum protection against backpressure/back siphonage • Removable bronze seats • Replaceable discs • Internal sensing passage
• Corrosion resistant • Easy in-line maintenance and testing • Maximum working pressure 175 psig • Operating temperature range 33°F-140°F
40 - 7 0 X - X X SIZE (in.) C—6 E—8 G — 10
METER C — With meter in cubic feet E — With meter in gallons G — Less water meter
Flow Curves :
GATE VALVES 1 — Less gate valves 3 — With OS&Y gate valves
(•) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Dimensions (in.) – Weights (lbs.) Size (in.) 6 8 A 63.00 75.00 B 42.00 52.00 C (OS&Y) OPEN 30.12 37.75 D 5.50 6.75 E (OS&Y) OPEN 41.62 53.75 F 13.25 14.75 G 5.50 6.75 Test cocks (line) 3/4 NPT 3/4 NPT Test cocks (by-pass) 1/2 NPT 1/4 NPT Net Wt. (less gate valves) 452.00 738.00 Net Wt. (with 0S&Y valves) 776.00 1233.00 Shipping Wt. (less gate valves) 550.00 908.00 912.00 1413.00 Shipping Wt. (with OS&Y valves)
Contents | Back
Customer Service 1-704-841-6000
10 88.25 62.06 45.75 8.00 63.25 17.50 8.00 3/4 NPT 1/4 NPT 1471.00 2314.00 1641.00 2530.00
Prev. Page |
Next
81
Backflow Preventers
Hose End Vacuum Breakers 3/4" Hose Connection Vacuum Breakers
38-300 Series
The Conbraco Series 38-304 and 38P Hose Connection Vacuum Breakers are designed to prevent cross connection caused by back-siphonage. They consist of a single check with an atmospheric vacuum breaker vent. They feature a break-away set-screw for tamper-proof protection. They are not suitable for continuous pressure applications. • Meets ASSE & CSA standards; listed with IAPMO
38P
• Maximum working pressure 125 psig • Maximum temperature 180° F
Model Number 38-304-AS 38-304-CS 38P
Wt./100 (lbs.) 16.8 16.8 7.0
FINISH SATIN BRASS SATIN CHROME THERMOPLASTIC
38-304-AS
3/4" Hose Connection Vacuum Breakers
38-300 Series
The Conbraco Series 38-304 and 38P Hose Connection Vacuum Breakers are designed to prevent cross connection caused by back-siphonage. They consist of a single check with an atmospheric vacuum breaker vent. They feature a break-away set-screw for tamper-proof protection. They are not suitable for continuous pressure applications. • Corrosion resistant body and checks • Low Head loss • Easy to install with break-away set screw
• Protects against back siphonage and low-head back pressure
Flow Curves :
38-304-02
3/4" Anti-Freeze Hose Connection Vacuum Breakers
38-400 Series
The Conbraco Series 38-404 anti-freeze hose connection vacuum breaker is especially designed to prevent back-siphonage on wall and yard hydrants. It features a break-away set-screw for tamper-proof protection and manual drain for protection against freezing conditions. It is not suitable for continuous pressure applications. • Meets ASSE & CSA standards; IAPMO listed • Maximum working pressure 125 psig
38-400
82
Contents | Back
38-400-AS
Model Number 38-404-01 38-404-03 38-404-AS 38-404-CS
Customer Service 1-704-841-6000
FINISH SATIN BRASS SATIN CHROME SATIN BRASS SATIN CHROME
• Maximum temperature 180°F
SLEEVE Metal Metal Plastic Plastic
Wt./100 (lbs.) 37 37 37 37
Prev. Page |
Next
Backflow Preventers
Vacuum Breakers 38-100 Series
Atmospheric Type Vacuum Breakers Economical protection against back-siphonage and low hazard cross connections. For hot and cold water service up to 212°F at 125 psig for 1"; and up to 180°F at 125 psig for 1/4" - 2". • • • •
• Meets ASSE & CSA standards; listed with IAPMO • Finishes: Rough brass (-01); polished brass *(04), rough chrome *(-03), or polished chrome *(-06)
Compact and lightweight Heat resistant silicone seat disc Easy to maintain and corrosion resistant All Metal Enclosure
Flow Curves :
(*) Rated flow as determined by ASSE design performance standards.
Pressure Loss (PSI)
Rate of flow
Rate of flow
Model Number 38-101 38-102 38-103 38-104 38-105 38-106 38-107 38-108
Contents | Back
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Customer Service 1-704-841-6000
A .9062 .9062 1.0937 1.3125 1.75 2.00 2.00 2.12
Dimensions (in.) B C 2.375 1.0312 2.375 1.0312 2.5 1.1875 3.0625 1.4687 4.06 1.87 4.37 2.00 4.37 2.00 4.50 2.25
D 1.8125 1.8125 1.1875 2.125 2.87 3.75 3.75 3.75
Wt/100 (lbs.) 50.9 47.7 54.7 79.7 174 316 289 369
Prev. Page |
Next
83
Backflow Preventers
38-200 Series
Atmospheric Type Vacuum Breakers (Forged Body) Economical protection against back-siphonage and low hazard cross connections. For hot and cold water service up to 212°F at 125 psig for 1/4" - 3/4". • • • •
Compact and lightweight Heat resistant silicone seat disc Easy to maintain and corrosion resistant Meets ASSE & CSA standards; listed with IAPMO
• Finishes: Rough brass (-01); rough chrome *(-03), or polished chrome *(-06) • Add HT to end of part number for high temperature (212˚F) (1/4" & 3/8" only) • 1/2" & 3/4" models rated to 212˚F
Flow Curves :
•
38-200/232
Contents | Back
•
•
•
38-201/202/203/204
Model Number 38-201 38-202 38-203 38-204 38-231 38-232
84
(•) Rated flow as determined by USC’s FCCC&HR and ASSE design performance standards.
Size (in.) 1/4 3/8 1/2 3/4 1/4 3/8
Customer Service 1-704-841-6000
A 1.09 1.09 1.28 1.47 0.75 0.87
Dimensions (in.) B C 2.31 1.03 2.31 1.03 2.62 1.28 3.00 1.47 2.22 1.44 2.22 1.75
D 0.66 0.66 1.87 2.00 0.66 0.66
Wt/100 (lbs.) 50.6 47.7 54.7 63.1 26.2 31.2
Prev. Page |
Next
Backflow Preventers
38-502 Series
Laboratory Faucet Vacuum Breaker Backflow protection for potable water using two independently acting soft-seated checks. Reversible inlet/outlet adapters make installation easy on lab faucets, community sinks, beauty salons and barber shops. • Corrosion resistant • Forged brass body • Suitable for hot or cold water service up to 212°F and 125 psi
A
• Rough brass, rough chrome or polished chrome finish • Easy to maintain • Compact and lightweight
Flow Curves : B
Model Number 38-502-01 38-502-02 38-502-03 38-502-CP2 38-502-CP3
Inlet (in.) 3/8 MNPSM* 3/8 FNPT 3/8 FNPT 1/4 FNPT 3/8 FNPT
Outlet (in.) 3/8 FNPT 3/8 FNPT 3/8 MNPSM 1/4 FNPT 3/8 FNPT
Dimensions (in.) A B 2.33 1.24 2.34 1.24 2.33 1.24 2.34 1.24 2.34 1.24
*American National Standard straight pipe thread for free-fitting mechanical joints (male)
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
85
Backflow Preventers
40-000 Series
Freeze Protection Valve The Conbraco Series 40-000 Freeze Protection Valves protect Conbraco® Backflow Preventers from freezing when installed in accordance with manufacturer’s instructions. All internal parts of the Freeze Protection Valves are replaceable. • Installs easily on Conbraco® Backflow Preventers • Ease of repair with available repair kit • 175 psig maximum operating pressure • Corrosion resistant • 1/4" male pipe thread inlet port • Available with 1/8" male x 1/4" female Apollo® test cock
• Discharge port accommodates 5/8" I.D. hose • Mechanical operating principle • Nominal start to open temperature of 35°F • Maximum temperature of 180°F • Compact design • Patented design • IAPMO listed
40 - 0 0 0 - F P V X OPTIONS 1 – w/1/8" NPT plug 2 – w/1/8" male x 1/4" female Apollo test cock R – Repair kit* for FPV1 and FPV2 * Repair kit includes: Thermal element, spring, spring guide, two O-rings (all internal parts)
NET WEIGHT EACH : Dimensions (in.) - Weights (lbs.) Model 40-000-FPV1: .70 Model 40-000-FPV2: .77
86
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Backflow Preventers
Backflow Preventer Accessories Test Kits
40-200-TK
Differential Pressure Gauge Test Kits These are three valve test kits used for testing all DCV, RPZ, PVB & SVB backflow preventers. • Differential pressure type with a dual scale of 0-15 psig/0-100kPa differential pressure range with a +2% accuracy (full scale).
40-200-TK5
40-200-TK5 This a five valve test kit used for testing all DCV, RPZ, PVB & SVB backflow preventers. The five valve test kit is similar to the three valve kit except it has an additional two valves that make it possible to bleed lines without disconnecting hoses. It also features a line pressure gauge in addition to the differential pressure gauge, a thermoplastic gauge body and adjustable nylon strap.
40-200-TKRC
40-200-TKRC The test kit is identical to the 40-200-TK5 except it is for non-potable water. The test kit is color-coded, with a purple dial that matches reclaimed water lines in industrial, irrigation and fire service applications.
Model Number 40-100-TK 40-200-TK *40-200-TK5 *40-200-TKRC
Application ALL DCV ALL DCV, RPZ, PVB & SVB ALL DCV, RPZ, PVB & SVB ALL DCV, RPZ, PVB & SVB
WT./100 (lbs.) 780 780 650 650
* Thermoplastic gauge body
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
87
Backflow Preventers
40-200 & Model RP (4S-200) Backflow Preventers
Air Gap Drain For installation with Conbraco’s 40-200 and 4S-200 Series Reduced Pressure Principle backflow preventers. The Conbraco Air Gap Drain (AGD) is designed to funnel minor relief valve discharges, due to line pressure fluctuations and /or minor check valve fouling, into the drainage system. Drain piping is easily attached to the drain’s threaded bottom. Note: The AGD is NOT designed to collect the full discharge capacity of the relief valve.
Dimensions (in.) – Weights (lbs.) R.P. AGD 40 Series Model No. A B 1/4", 3/8", 1/2" 40-200-XA 8-7/16 5 3/4" & 1" 40-200-X1 9-1/2 5-1/8 1-1/4" & 2" 40-200-X1 11-1/4 5-1/8 2-1/2" & 3" 40-200-X2 19 9-7/8 4" 40-200-X2 20 9-7/8 6" 40-200-X2 21 9-7/8 8" 40-200-X3 22-11/16 12-11/16 10" 40-200-X3 25-11/16 12-11/16
C 1" NPT 1" NPT 1" NPT 2" NPT 2" NPT 2" NPT 3" NPT 3" NPT
Wt./100 230 340 340 1100 1100 1100 1245 1245
Dimensions (in.) – Weights (lbs.) R.P. AGD 4S Series Model No. A 2-1/2" - 4" 40-200-X1 13-11/16 6" 40-200-X1 14-5/8 8" & 10" 40-200-X2 23-3/4
C 1" NPT 1" NPT 2" NPT
Wt./100 340 340 1100
(40-200)
(40-200)
B 5-1/8 5-1/8 9-13/16
(4S-200)
88
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
In-Line Check Valves
In-Line Check Valves 61-100 Series
Bronze Ball Cone® Check Valves Well-suited for a broad range of applications, including 125 psig saturated steam. The rugged bronze body and RPTFE ball check provide reliable, patented protection against reverse flow. • • • •
Female x Female Threaded 1/4" through 3" Unique (U.S. Patent # 4,172,465) design Tight shut-off in reverse flow conditions Spring-loaded for fast seating action
Model Number 61-101-01 61-102-01 61-103-01 61-104-01 61-105-01 61-106-01 61-107-01 61-108-01 61-109-01 61-100-01
61-200 Series
Size (in.) 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
A 2.06 2.12 2.31 2.87 3.50 4.18 4.93 6.00 7.00 8.12
• Center guided so that radial alignment is never needed • Straight-through flow minimizes velocity change • Rated 400 psig WOG Dimensions (in.) B 1.12 1.12 1.12 1.37 1.75 2.12 2.50 3.00 3.50 4.12
C 1.12 1.12 1.12 1.50 1.93 2.37 2.81 3.68 4.50 5.31
Wt./100 (lbs.) 38 38 38 75 145 275 394 630 1400 1665
Bronze Ball Cone® Check Valves Ideally suited for a broad range of applications, including 125 psig saturated steam. The rugged bronze body and RPTFE ball check provide reliable, patented protection against reverse flow. • • • •
Male x Female Threaded 1/4" through 2" Unique (U.S. Patent # 4,172,465) design Tight shut-off in reverse flow conditions Spring-loaded for fast seating action
Model Number 61-201-01 61-202-01 61-203-01 61-204-01 61-205-01 61-206-01 61-207-01 61-208-01
Contents | Back
Customer Service 1-704-841-6000
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
• Center guided so that radial alignment is never needed • Straight-through flow minimizes velocity change • Rated 400 psig WOG
A 2.38 2.38 2.56 3.12 3.87 4.44 5.18 6.50
Dimensions (in.) B 1.12 1.12 1.12 1.37 1.75 2.12 2.50 3.00
C 1.12 1.12 1.12 1.50 1.93 2.37 2.81 3.68
Prev. Page |
Wt./100 (lbs.) 38 38 38 75 145 275 394 630
Next
89
In-Line Check Valves
62-100 Series
Stainless Steel Ball Cone® Check Valves The 62-100 Series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow. • • • • •
Female x Female Threaded 1/4” through 2” Unique (U.S. Patent # 4,172,465) design Longer life in severe environments Spring-loaded for fast seating action 125 psig saturated steam
Model Number 62-101-01 62-102-01 62-103-01 62-104-01 62-105-01 62-106-01 62-107-01 62-108-01
61-500 & 62-500 Series
Size (in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Dimensions (in.) B 1.12 1.12 1.12 1.37 1.75 2.12 2.50 3.00
C 1.12 1.12 1.12 1.50 1.93 2.37 2.81 3.68
Wt./100 (lbs.) 38 38 38 75 145 237 381 636
Fabricated with stainless steel springs and elastomeric seats. No radial alignment is needed. Exceptional resistance to chemicals and corrosion. Spring is fully shielded from flow.
Bronze FNPT x FNPT 61-501 61-502 61-503 61-504 61-505 61-506 61-507 61-508
Contents | Back
A 2.06 2.12 2.31 2.87 3.50 4.18 4.93 6.00
Soft Seat Check Valves
• Bronze sizes: 1/4" to 2" • Stainless steel sizes: 1/4" to 1" • Bubble-tight shut-off, ideally suited for gaseous service • Straight-through design minimizes flow changes
90
• Center guided so that radial alignment is never needed • Straight-through flow minimizes velocity change • Rated 400 psig WOG, cold non-shock
SS Ball Cone FNPT x FNPT 62-501 62-502 62-503 62-504 62-505 – – –
Customer Service 1-704-841-6000
Size(in.) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
• NPT threaded; 400 psig WOG • Retainer is notched for easy identification • Check is spring loaded for fast seating action; approximate opening pressure 1/2 psi • See “PRECAUTIONARY NOTE”
Dimensions (in.) A B C 2.312 1.125 1.125 2.312 1.125 1.125 2.312 1.125 1.125 2.875 1.375 1.500 3.500 1.750 1.937 4.187 2.125 2.375 4.937 2.500 2.812 6.000 3.000 3.687
61 Series Wt./100 38 38 38 75 145 275 394 630
62 Series Wt./100 38 38 38 75 150 – – –
Prev. Page |
Next
In-Line Check Valves
Solder End Soft Seat Check Valves
61-600 Series
All bronze with stainless steel springs and elastomeric seats. No radial alignment is needed. Exceptional resistance to corrosion. Spring fully shielded from flow. • Sizes: 1/2” to 2” • Bubble-tight shut-off, ideally suited for gaseous service • Straight-through design minimizes flow changes
Model Number 61-603 61-604 61-605 61-606 61-607 61-608
C B
A
• Solder end; 400 psig WOG • Check is spring loaded for fast seating action; approximate opening pressure 1/2 psi • See “PRECAUTIONARY NOTE” • Retainer is notched for easy identification
Dimensions (in.) A B C 2.75 1.12 1.25 3.68 1.20 1.62 4.50 1.93 2.12 6.11 2.13 2.38 6.87 2.50 2.81 7.46 3.38 3.75
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2
Wt./100 (lbs.) 138 175 145 330 610 1010
Brass NPT “Mini” Check Valves
61-700 Series
Ideally suited for all OEM applications where space is a premium. Excellent for use on water and air. They feature a bubble-tight soft seat design with a very light loaded stainless steel spring. Model Number 61-701-01 61-702-01 61-703-01 61-704-01 61-705-01
Contents | Back
A 1.72 1.79 2.02 2.50 2.95
Dimensions (in.) B 0.81 0.93 1.06 1.25 1.62
C 0.92 1.05 1.17 1.40 1.76
Wt./100 (lbs.) 22 29 38 54 110
Precautionary Note Not recommended for use with reciprocating pumps and similar applications which may induce repetitious vibrations. Low flow rates which do not fully open the valve, may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc.
C
B
Size (in.) 1/4 3/8 1/2 3/4 1
A
Customer Service 1-704-841-6000
Prev. Page |
Next
91
Pipeline Strainers
Pipeline Strainers Bronze NPT “Y” Strainers
59 Series
Lightweight, compact protection against foreign particles. Corrosion-resistant bronze body and stainless steel screens. Operating pressures to 400 psig.
A
• • • • •
Sizes: 1/8" to 4" Self-aligning screen makes cleaning easy Small sizes ideal for O.E.M. applications Rated 400 psig at 150°F WOG Optional tapped caps available (less plug)
• Optional mesh screens available upon request • Sizes 1/8" to 1/2" available as UL® recognized component (Made from 85-5-5-5 bronze)
B
Standard Screen Size (in.) 1/8 to 1/2 3/4 to 3 4
Model Number 59-000-01 59-001-01 59-002-01 59-003-01 59-004-01 59-005-01 59-006-01 59-007-01 59-008-01 59-009-01 59-010-01 59-011-01 59-UL0-01 59-UL1-01 59-UL2-01 59-UL3-01
Screen Opening 50 Mesh 20 Mesh .125 Perforation
Size (in.) 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 1/8 1/4 3/8 1/2
Dimensions (in.) A B (Suffix-02) 2.00 1.25 1/8 NPT 2.00 1.25 1/8 NPT 2.69 2.00 1/4 NPT 2.69 2.00 1/4 NPT 3.87 3.25 1/2 NPT 4.75 4.00 3/4 NPT 5.12 4.25 3/4 NPT 5.75 5.00 1 NPT 6.75 6.00 1-1/4 NPT 7.94 5.87 1-1/4 NPT 9.12 6.87 1-1/2 NPT 11.94 10.12 1-1/2 NPT 2.00 1.25 1/8 NPT 2.00 1.75 1/8 NPT 2.69 2.00 1/4 NPT 2.69 2.00 1/4 NPT
Wt./100 44.5 42.5 78.6 75.1 174.0 276.0 358.0 541.0 747.0 1130.0 1580.0 3070.0 44.5 42.5 78.6 75.1
Screen Area (in.2) 1.38 1.38 3.19 3.19 8.18 12.9 16.2 22.8 32.7 47.3 64.8 115.0 1.38 1.38 3.19 3.19
Note: Dimensions shown are subject to change.
Suffix -02 -P2 -06 -03
Option Tapped Cap Tapped Cap with Plug Strainer/Ball Valve Combination Monel Screen
Suffix -E1 -A1 -B1 -C1 -H1
Screen Options 20 MESH 40 MESH 60 MESH 80 MESH 100 MESH
Bronze Sweat End “Y” Strainers
59-300 Series
Designed with minimal wall thickness at solder ends to allow high strength joints. Lightweight and compact with corrosion-resistant bronze bodies, stainless steel screens.
A
• Operating pressures to 400 psig at 150˚F WOG • Sizes: 1/2" to 2" Model Number 59-303-01 59-303-P2 59-304-01 59-304-P2 59-305-01 59-305-P2 59-306-01 59-306-P2 59-307-01 59-307-P2 59-308-01 59-308-P2
B
Standard Screen Size (in.) 1/2 3/4 to 2
Suffix -01 -02 -P2
92
Screen Opening 50 Mesh 20 Mesh
Size (in.) 1/2 1/2 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 2
• Optional tapped caps available (less plug)
Dimensions (in.) Tapped Cap Screen Area A B (Suffix-02) Wt./100 (in.2) 2.75 1.81 1/4 NPT 50 3.19 1/4 NPT 50 4.00 2.87 1/2 NPT 121 8.18 1/2 NPT 121 4.75 3.56 3/4 NPT 189 12.90 3/4 NPT 189 5.25 3.94 3/4 NPT 280 16.20 3/4 NPT 280 6.00 4.62 1 NPT 426 22.80 1 NPT 426 7.25 5.00 1-1/4 NPT 627 32.70 1-1/4 NPT 627
Option Solid cap (standard) Tapped Cap Tapped cap with pipe plug
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Pipeline Strainers
“Mini” Strainer
59V Series A
B
The body of the 59-V is corrosion-resistant solid cast bronze, ASTM B-584. The removable clean-out cap is solid brass bar stock, ASTM B-16. Standard screens are made of 304 stainless steel, and are 50 mesh. • 50 mesh screen standard, optional 80 (-C1) or 100 (-H1) mesh • WORKING PRESSURE (non-shock): 400 psig @ 210˚F WOG 125 psig @ 400˚F WSP
Model Number 59V-000-01 59V-001-01
539 Series Class 150 & 300
• Cv Factors 1/8" 1.03 GPM 1/4" 1.42 GPM • Sizes: 1/8" and 1/4" NPT
Dimensions (in.) A B 1.75 1.25 2.00 1.31
Size (in.) 1/8 1/4
Wt./100 (lbs.) 25.0 29.7
Flanged Cast Bronze “Y” Strainers Ideal for most standard industrial applications. Use to protect meters, nozzles, heat exchangers, condensers or other process equipment against debris. • Working Pressure (non-shock) 539-15 - Class 150 150 psig @ 406°F. Steam 225 psig @ 150°F. Water, Oil, Gas
539-30 - Class 300 300 psig @ 422° F. Steam 500 psig @ 150° F. Water, Oil, Gas • Self Cleaning • Self Aligning Screens (304SS Standard)
Part Numbers CL150 (Liquid) 2" 603258LI
CL300 (Liquid)
5" 60325BNI
2" 603358LI
2-1/2" 603259LI
6" 60325CNI
2-1/2" 603359LI
6" 60335CNI
3" 603250LI
8" 60325ENI
3" 603350LI
8" 60335ENI
4" 60325ANI Dimensions (in.) A B Size (in.) Class 150 Class 300 2 9.50 10.12 6.25 2-1/2 11.25 11.75 7.12 3 12.37 13.00 8.37 4 14.50 15.50 10.00 5 16.87 17.50 12.25 6 19.12 19.87 14.00 8 24.25 25.12 17.00
Blow-Off NPT 1 1-1/4 1-1/2 1-1/2 2 2 2
5" 60335BNI
4" 60335ANI Screen Area (in.2) 46.0 58.3 74.5 118.7 189.0 270.0 425.0
Weight/lbs. Class 150 Class 300 30 33 50 55 61 71 91 113 146 178 180 212 370 410
TCG Series
Cast Iron Pipe Threaded Y-Strainer
[Apollo® International]
Install these hardworking strainers upstream in almost any application to protect valves, regulators, solenoids and meters from rust, dirt and pipe scale. • Graphite gasketed blowoff plug for easy clean-out • 20 mesh screens standard to 2"; .045 perf 2-1/2" to 3", others available • Sizes: 1/4" to 3" Model DImensions (in.) Number Size (in.) A B 612-011-A1 1/4 3.19 2.37 612-012-A1 3/8 3.19 2.37 612-013-A1 1/2 3.19 2.37 612-014-A1 3/4 3.75 3.37 612-015-A1 1 4.00 3.50 612-016-A1 1-1/4 5.00 4.12 612-017-A1 1-1/2 5.75 4.69 612-018-A1 2 7.00 5.44 612-019-L1 2-1/2 4.25 5.68 612-010-L1 3 10.00 7.00
Contents | Back
Customer Service 1-704-841-6000
Blow-off NPT 1/4 1/4 1/4 3/8 1/2 3/4 3/4 1 1 1
Wt./100 Screen (lbs.) Area (in.2) 1.25 2.8 1.25 2.8 1.50 2.8 2.25 4.7 3.00 7.0 5.25 12.1 6.50 16.4 11.13 23.1 23.50 55.0 33.00 78.4
Prev. Page |
Next
93
Pipeline Strainers
FC1 & FC2 Series [Apollo International] ®
Cast Iron Pipe Flanged Y-Strainers Same great features as the Model TCG but with flanged connections. • Model FC2-Class 250: -Sizes 1-1/2" -12"; 250 psig @ 450˚F. Steam; 500 psig @ 150˚F. Water, Oil, Gas -Sizes 14" -18"; 250 psig @ 275˚F. Steam; 300 psig @ 150˚F. Water, Oil, Gas
• Model FC1-Class 125: -Sizes 1-1/2" -12"; 125 psig @ 450˚F. Steam; 200 psig @ 150˚F. Water, Oil, Gas -Sizes 14" -18"; 125 psig @ 250˚F. Steam; 150 psig @ 150˚F. Water, Oil, Gas
Part Numbers FC1-125 (Liquid)
FC2-250 (Liquid)
1-1/2" 613217L1 8" 61321ENI
1-1/2" 613317L1
8" 61331ENI
2" 613218L
10" 61321GNI
2" 613318LI
10" 61331GNI
2-1/2" 613219L
12" 61321HNI
2-1/2" 613319LI
12" 61331HNI
3" 613219L
14" 61321JNI
3" 613310LI
14" 61331JNI
4" 61321ANI
16" 61321KNI
4" 61331ANI
16" 61331KNI
5" 61321BNI
18" 61321LPI
5" 61331BNI
18" 61331LPI
6" 61321CNI
A (in.) B (in.) Size (in.) Class 125 Class 250 Class 125 Class 250 Blow-Off Size (in.) Flanged Flanged Flanged Flanged Plug 1-1/2 9.50 9.50 5.44 5.44 3/4 2 9.50 11.62 6.50 6.12 1 2-1/2 10.50 13.00 7.00 6.75 1-1/4 3 12.00 14.00 8.00 8.00 1-1/4 4 14.87 17.06 10.75 10.75 1-1/4 5 17.37 19.06 13.50 13.50 1-1/2 6 21.00 21.06 16.25 16.25 1-1/2 8 22.50 23.00 17.00 19.50 2 10 26.12 28.00 20.25 21.25 2-1/2 12 30.37 32.62 24.00 25.00 2-1/2 14 36.00 37.62 29.00 29.50 2 16 37.00 38.94 33.00 33.50 2-1/2 18 46.00 47.62 35.50 36.50 3
6" 61331CNI
Weight lbs. Class 125 Class 250 Flanged Flanged 16 22 24 28 33 38 44 54 85 110 117 160 174 224 262 468 410 590 604 890 815 1080 1224 1800 1990 2380
Screen Area (in.2) 23.2 34.5 47.3 64.8 127.2 198.7 286.0 327.5 550.0 759.0 1052.0 1406.0 1772.0
* Note: Dimensions shown are subject to change.
94
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Water Gauges
Water Gauges & Accessories 20-100 & 20-150 Series
Standard Pattern Bronze Water Gauges Use for all types of liquid level verification; available with 3/8" or 1/2" NPT male pipe connections. Aluminum or plastic composition hand wheels; EPDM gauge glass gaskets standard. Other glass gaskets available. • Ball checks standard on 20-150 models • Equipped with two copper guard rods • Standard 1/4" needle drain valve in lower arm
Model Number 20-101 20-102 20-104 20-105 20-150 20-151
Pipe Size (in.) 3/8 3/8 1/2 1/2 1/2 1/2
• Rated: 125 psig @ 350°F, 300 psig @ 100°F (See note!) • CRN Registered
Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12
Wt./100 (lbs.) 145 145 160 160 160 160
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
20-200, 20-250 Heavy Pattern Bronze Water Gauges & 25-200 Series All standard 20 Series features but with a heavier valve body pattern for higher service ratings. • Available with 3/8, 1/2 and 3/4 MNPT fittings • Ball checks standard on 20-250 models • Polished finish on 25-200 valves Model Number 20-201 20-202 20-204 20-205 20-207 20-208 20-250 20-251 20-253 20-254 25-201 25-202 25-204 25-205 25-207 25-208
Pipe Size (in.) 3/8 3/8 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 3/8 3/8 1/2 1/2 3/4 3/4
• Rated: 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
Wt./100 (lbs.) 185 189 205 205 270 270 195 200 355 360 180 185 190 190 290 295
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
95
Water Gauges
20-300, 20350, 25-400 & 25-500 Series
Square Pattern Bronze Water Gauges Available with 1/2" (ASTM B-16 brass bar stock) or 3/4" (B-584 cast bronze) NPT male pipe connections. Four guard rods and EPDM gauge glass gaskets standard. Other glass gaskets available. • • • •
Standard 1/4" needle drain valve in lower arm Pet cock or Apollo® ball valve drain on request Polished finish on 25-400 and 25-500 Ball checks standard on 20-350 and 25-500
Model Number 20-304 20-305 20-307 20-308 20-350 20-351 20-353 20-354 25-404 25-405 25-407 25-408 25-501 25-502 25-504 25-505
Pipe Size (in.) 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4
• Rated: 200 psig @ 400°F, 400 psig @ 100°F except for 25-400 (See note!) • 25-400 Rated=125 psig@350°F, 300 psig@100°F (See note!) • CRN Registered Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
Wt./100 (lbs.) 260 270 345 365 265 265 360 365 285 285 350 350 290 290 355 355
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
20-400 & 20-410 Series
Side Mounted Handwheel Water Gauges Side-mounted handwheels allow water gauge operation in hard to reach places; with all the 20 Series design features. • Ideal for concealed jacketed type boilers • No guard rod brackets: 20-405, 20-406, 20-410 • Standard 1/4" needle drain valve • Brackets and guard rods standard: 20-407, 20• Rated: 125 psig @ 350°F, 300 psig @ 100°F 408 (See note!) • EPDM standard gauge glass gasket • 1-1/4'' Extended shank length; 20-410 • Compact - requires minimum space • CRN Registered Model Pipe Number Size (in.) 20-405-00 RH 1/2 20-406-00 LH 1/2 20-407-00 RH 1/2 20-408-00 LH 1/2 20-410-00 LH 1/2
Glass O.D. & Length 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12
Wt./100 (lbs.) 165 165 170 170 180
Wheel Type ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
96
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Water Gauges
20-700 & 20-710 Series
Simple Expansion Tank Gauges Available with 3/8" or 1/2" MNPT connections; EPDM gauge glass gaskets and 1/4" needle drain valve in lower arm are both standard. • 20-710 has plug in top arm to insert glass straight through • 1/4" pet cock or Apollo® ball valve optional • Ball checks on request (20-704 only) Model Number 20-703-00 20-704-00 20-713-00 20-714-00
Pipe Size (in.) 3/8 1/2 3/8 1/2
• Rated: 125 psig @ 350°F, 300 psig @ 100°F (See note!) • CRN Registered
Glass O.D. & Length 5/8 x 10 5/8 x 12 5/8 x 10 5/8 x 12
Wt./100 (lbs.) 120 135 120 135
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
23-600 Series
Stainless Steel Expansion Tank Gauges Holds all 316 stainless steel-compatible liquids. In lower arm: shut-off valve and stainless steel drain valve. • Two stainless steel guard rods • Rated: 250 psig at 406°F: maximum working pressure (See note!) Model Number 23-651-00 23-654-00
Pipe Size (in.) 1/2 3/4
• Standard PTFE reinforced gauge glass gaskets • High pressure glass standard • CRN Registered Glass O.D. & Length 5/8 x 12 5/8 x 12
Wt./100 (lbs.) 225 225
Wheel Type ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
97
Water Gauges
20-600 & 20-800 Series
Bronze Expansion Tank Gauges Bottom arm shut-off valve prevents water leaks during gauge glass changes. • EPDM standard gauge glass gasket • 20-800 models: 1/4" NPT pipe thread in upper arm for pressure gauge standard
Model Number 20-604-00* 20-605-00* 20-804-00* 20-805-00*
Pipe Size (in.) 1/2 1/2 1/2 1/2
• Rated: 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered
Glass O.D. & Length 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12
Wt./100 (lbs.) 155 175 160 160
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION
*Automatic model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
24-600 & 24-650 Series
Chain Lever Water Gauges Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns. • Rated 250 psig @ 400°F, 500 psig @ 100°F (See note!) • Use on large boilers with inconvenient columns • Automatic and non-automatic models
Model Number 24-601-00 24-602-00 24-651-00* 24-652-00*
Pipe Size (in.) 1/2 3/4 1/2 3/4
• Furnished with 12 feet of chain and 5/16 diameter full-blow valve with safety handle • High pressure glass standard with the 24 series • CRN Registered • Standard PTFE reinforced gauge glass gasket
Glass O.D. & Length 5/8 x 12 3/4 x 16 5/8 x 12 3/4 x 16
Wt./100 (lbs.) 515 580 515 580
* Automatic model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
98
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Water Gauges
20-600 & 25-600 Series
Chain Lever Water Gauges Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns. • Quick opening, non-automatic • Service rating: 250 psig @ 400°F, 500 psig @ 100°F (See note!) • EPDM standard gauge glass gasket Model Number 25-601-00* 25-602-00* 20-601-00** 20-602-00**
• • • •
Standard 1/4" needle drain valve Furnished with 12 feet of chain H-2485 pull handle available CRN Registered
Pipe Size (in.) 1/2 3/4 1/2 3/4
Glass O.D. & Length 5/8 x 12 3/4 x 16 5/8 x 12 3/4 x 16
Wt./100 (lbs.) 335 350 370 435
* Polished Finish Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets. ** Ball valve not included. Includes 1/4" needle drain.
24-300 & 24-350 Bronze Liquid Level Gauges Automatic and non-automatic direct reading gauges in shank pipe sizes 1/2" and 3/4". Series • Heavy pattern bronze valve body • Guard rod bracket to accommodate four guard rods • PTFE reinforced gauge glass gasket and stem packing are standard
• Automatic - conforms to ASME power boiler code requirements for automatic water gauges; ball checks in upper and lower arms • High pressure gauge glass and gaskets are standard • CRN Registered
• Rated 250 psig @ 400°F, 500 psig @ 100°F (See note!)
NonAutomatic
Automatic
Model Number 24-301-00 24-302-00 24-304-00 24-305-00
Pipe Size (in.) 1/2 1/2 3/4 3/4
Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
Wt./100 (lbs.) 425 425 490 490
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION
24-350-00 24-351-00 24-353-00 24-354-00
1/2 1/2 3/4 3/4
5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
425 425 490 490
ALUMINUM COMPOSITION ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
99
Water Gauges
21 Series
Rough Bronze Water Gauges With Extended Shank Available with 3/8" or 1/2" MNPT connections; EPDM gauge glass gaskets and 1/4" needle drain valve in lower arm are both standard. • 21-200 rated 200 psig @ 400°F, 400 psig @ 100°F (See note!) • CRN Registered • Equipped with two copper guard rods
• 1-3/4" standard shank length; for 1-1/4" shank length, use – 07 suffix • 21-100 rated 125 psig @ 350°F, 300 psig @ 100°F
Model Number 21-101 21-102 21-104 21-105 21-150* 21-151* 21-204 21-205 21-250* 21-251*
Pipe Size (in.) 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Glass O.D. & Length 5/8 x 10 5/8 x 10 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12 5/8 x 12
Wt./100 (lbs.) 163 175 185 197 195 207 215 219 215 215
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION
* Automatic Model Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
23-400 & 23-450 Series
Stainless Steel Liquid Level Gauges Ideal for handling alcohol solvents, acetic acid and ketones. Automatic models conform to ASME requirements; aluminum and composition handwheels. • PTFE reinforced gauge glass gaskets, stem packings • Chemical resistant PTFE seat • 5/16 dia. full flow all SS drain valve with safety handle
NonAutomatic
Automatic
• Guard rod bracket to accommodate four SS guard rods • Rated 500 psig @ 450°F (See note!) • High pressure gauge glass standard • CRN Registered
Model Number 23-401-00 23-402-00 23-404-00 23-405-00
Pipe Size (in.) 1/2 1/2 3/4 3/4
Glass O.D. & Length 5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
Wt./100 (lbs.) 385 385 450 450
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION
23-450-00 23-451-00 23-453-00 23-454-00
1/2 1/2 3/4 3/4
5/8 x 12 5/8 x 12 3/4 x 16 3/4 x 16
390 390 455 455
ALUMINUM COMPOSITION ALUMINUM COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
100
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Water Gauges
Tubular Gauge Glass Protector Reduces risk of injury and damage from broken exploding glass; maximum length: 50". • No. I-2733* 5/8" Glass Protector • No. I-2734* 3/4" Glass Protector • Made to fit most water gauges
• Not available on 23-400, 23-650, 24-300, 24600 models • CRN Registered
Note: Water gauge part number and centerline length are required when ordering. Priced according to length and application.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
101
Plumbing Specialties
Plumbing Specialties 26-100 & 26-300 Series
Compression Gauge Cocks For draining expansion tanks, other liquid storage vessels. • 26-100: rated up to 125 psig • 26-300: soft metal seat/stuffing box rated up to 250 psig
26-300
Model Number 26-101 26-102 26-104 26-105 26-301 26-302 26-304 26-305 26-307 26-308 26-311 26-312 26-314 26-315 26-317 26-318
Pipe Size (in.) 3/8 3/8 1/2 1/2 3/8 3/8 1/2 1/2 3/4 3/4 3/8 3/8 1/2 1/2 3/4 3/4
• 26-310: stainless steel ball seat/stuffing box rated up to 250 psig Wt./100 (lbs.) 25.0 30.0 28.3 30.0 39.0 40.0 40.0 44.0 49.0 51.7 39.0 42.0 40.0 44.0 50.0 50.0
Wheel Type ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION ALUMINUM COMPOSITION
*26-100 series is not available with packing nut Specify the following suffix for finish: 01 - Satin Brass; 28 - Polished Brass.
3T-WMV Series Washing Machine Control Valve Single lever control of hot, cold water supplies; helps extend hose life and reduce risk of bursting by keeping pressure within piping. Models to fit most machine installations. • Precision twin-ball design for positive shut-off • Model 3S-WMV – 1/2" sweat with swivel copper 90˚ elbow for easy retrofit • Model 3T-WMV – 1/2" NPT or 1/2” sweat connection for through-wall/concealed piping Model Number 3S-WMV 3T-WMV 3T-WMVX
35-200 Series
• Model 3T-WMV-X – 1/2" NPSM or 1/2” sweat connection extended for wall connection boxes • 3/16" port; rated 25 psig
Part Number 35-303-01 35-303-02 35-303-03
Wt./100 (lbs.) 116 133 177
Compression Bibb Faucet Features heavy pattern with large opening. • Rough brass finish; sizes 1/2" and 3/4" Model Number 35-201-10 35-202-10
35-300 Series
Size (in.) 0.50 0.75
Wt./100 (lbs.) 58.3 57.0
Ball Valve Bibb Faucet Features heavy pattern with large opening. • Rough brass finish; sizes 1/2" and 3/4" Model Number 35-301-03 35-302-03
102
Contents | Back
Size (in.) Inlet (in.) 1/2 1/2 sweat/threaded connector 3/4 3/4 thread connector
Customer Service 1-704-841-6000
Outlet (in.) 0.75-11.5 NHR hose 0.75-11.5 NHR hose
Wt./100 (lbs.) 38.4 44.5
Prev. Page |
Next
Plumbing Specialties
Plumbing Specialties 39-100 Series
Hoist Control Valve Designed and manufactured to provide years of trouble-free service. Locking and non-locking models; steel lever pins and cam. 100% tested. • 1/2" FNPT connections • Bronze body • Stainless steel springs and screens
• Rust-proof, cam action lever • Large volume • Compact Model Number 39-101-01 39-102-01
45-100 Series
Wt./100 (lbs.) 202 202
Model Non-Locking Locking
Oil Tank Valves Designed to assure trouble-free operation and compact shut-off. • For use with fuel oil, water, other liquids; not with steam • Operating pressure 10 psi Model Number 45-101-01 45-102-01 45-103-01 45-104-01 Model Number 45-105-01 45-106-01 45-107-01 45-108-01
45-201 & 45-301 Series
• Temp. range -20˚F to 250˚F
NPT Pipe x Flared Tube 1/2 x 3/8 1/2 x 1/2 3/4 x 3/8 3/4 x 1/2
Wt./100 (lbs.) 27.6 29.9 32.0 33.1
NPT Pipe x Comp. w/Nut Sleeve 1/2 x 3/8 1/2 x 1/2 3/4 x 3/8 3/4 x 1/2
Wt./100 (lbs.) 27.0 30.0 31.7 32.0
Barrel Faucets Heavy duty rust-proof handle can be locked in closed position. • Standard 3/4" tapered pipe thread for drum, barrel openings Model Number 45-201-01 45-301-01
• Rust proof steel spring • Heavy-duty cast bronze body with wrench flats
Size (in.) 3/4 3/4
Seat Brass Brass
Wt./100 (lbs.) 85 108
Materials Brass PTFE
45-301-01 Meets Factory Mutual Approval Standard NO. 6031 For Self Closing Drum Faucets
78-124 & 78-125 Series
5-Port Tank Selector Unique ball design allows for higher flow capacities. Five port construction allows access to four tanks using only one valve. • Five NPT connections • Bronze ball valve with stainless steel Lever and Nut • PTFE seats and RPTFE stem packing • Stem packing adjustable for wear • Non-lubricated Model Number 78-124-01 78-125-01A
Contents | Back
Size (in.) 1/2 3/4
A 0.50 0.75
Customer Service 1-704-841-6000
B 1.26 1.56
• 50 psig pressure rating • Operation: four selected inlets feed one common outlet • Pointer on handle indicates the selected inlet • Easy mounting design
Dimensions (in.) C D E 2.52 2.27 3.53 3.12 2.93 3.87
F 1.12 1.53
G 10-24 1/4-20
H 1.40 1.98
Prev. Page |
Wt./100 (lbs.) 106 264 Next
103
Plumbing Specialties
Air Cocks 41 Series
Air Cocks (for air use only) An economical way to shut-off air lines. Nut bottom available for pressures to 200 psig with 1/8" port. Many handle configurations. Spring bottom with 5/32" port standard. • Spring bottom cocks tested at 80 psig air • Available in satin or polished brass or satin chrome
Satin Brass -01 -04
Type Standard Nut Bottom Model Number tee handle round shoulder
tee handle hexagon shoulder
41-060 41-070 41-080 41-090 41-120 41-130 41-140 41-150
lever handle round shoulder
lever handle hexagon shoulder
41-180 41-190 41-203 41-210 41-220 41-230 41-240 41-251
tee handle double male thread
lever handle double male thread
41-260 41-270 41-280 41-330 41-290 41-300 41-310 41-320
tee handle bibb nose
104
Contents | Back
• Maximum temperature is 500˚F
Wt./100 Size (in.) (lbs.) TEE HANDLE ROUND SHOULDER 1/8 12.8 1/4 13.0 TEE HANDLE HEXAGON SHOULDER 3/8 17.0 1/2 20.0 LEVER HANDLE ROUND SHOULDER 1/8 13.1 1/4 14.2 LEVER HANDLE HEXAGON SHOULDER 3/8 17.0 1/2 22.9 TEE HANDLE DOUBLE MALE THREAD 1/8 14.0 1/4 17.9 3/8 20.0 1/2 33.1 LEVER HANDLE DOUBLE MALE THREAD 1/8 14.0 1/4 18.5 3/8 19.1 1/2 31.3 TEE HANDLE BIBB NOSE 1/8 14.5 1/4 16.3 3/8 33.3 1/2 36.0 LEVER HANDLE BIBB NOSE 1/8 16.5 1/4 15.0 3/8 32.1 1/2 36.0
lever handle bibb nose
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing Specialties
Air Cocks 41 Series
Air Cocks (for air use only) An economical way to shut-off air lines. Nut bottom available for pressures to 200 psig with 1/8" port. Many handle configurations. Spring bottom with 5/32" port standard. • Spring bottom cocks tested at 80 psig air • Available in satin or polished brass or satin
Type Standard Nut Bottom
chrome • Maximum temperature is 500˚F
Satin Brass -01 -04
Model Number
tee handle double female
lever handle double female
tee handle male & female
lever handle male & female
tee handle male & female hex shoulder
lever handle male & female hex shoulder
tee handle double female hex shoulder
lever handle double female hex shoulder
tee handle straight nose hex shoulder
lever handle straight nose hex shoulder
Contents | Back
Customer Service 1-704-841-6000
Wt./100 Size (in.) (lbs.) TEE HANDLE DOUBLE FEMALE 1/8 13.0 41-370 41-380 1/4 14.0 41-390 3/8 26.0 41-391 1/2 27.0 TEE HANDLE MALE & FEMALE 1/8 13.0 41-400 41-410 1/4 14.0 41-420 3/8 21.0 41-421 1/2 26.0 LEVER HANDLE DOUBLE FEMALE 1/8 14.8 41-430 41-440 1/4 13.0 41-450 3/8 23.0 41-451 1/2 27.0 LEVER HANDLE MALE & FEMALE 1/8 15.2 41-460 41-470 1/4 15.0 41-480 3/8 23.0 41-481 1/2 27.0 TEE HANDLE MALE & FEMALE HEX SHOULDER 1/8 17.0 41-490 41-500 1/4 15.0 41-510 3/8 23.0 41-511 1/2 25.0 LEVER HANDLE MALE & FEMALE HEX SHOULDER 1/8 14.0 41-520 41-530 1/4 15.0 41-540 3/8 22.1 41-541 1/2 27.0 TEE HANDLE DOUBLE FEMALE HEX SHOULDER 41-550 1/8 17.0 41-560 1/4 17.0 41-570 3/8 25.0 41-571 1/2 28.3 LEVER HANDLE DOUBLE FEMALE HEX SHOULDER 1/8 15.0 41-580 41-590 1/4 18.2 41-600 3/8 24.0 41-601 1/2 28.8 TEE HANDLE STRAIGHT NOSE HEX SHOULDER 41-630 1/8 15.7 41-640 1/4 15.0 LEVER HANDLE STRAIGHT NOSE HEX SHOULDER 1/8 14.0 41-650 41-660 1/4 15.0
Prev. Page |
Next
105
Plumbing Specialties
41 Heavy & Extra Heavy
Pattern Air Cocks Heavy and extra heavy patterns for stronger applications. • Rated for air pressure up to 250 psig with nut version • Extra heavy pattern rated for 150 WSP - nut bottom only
Type Standard Nut Bottom
Satin Brass -01 -04
Model Number
Wt./100 Size (in.) (lbs.) HEAVY PATTERN TEE HANDLE DOUBLE FEMALE 1/4 28.00 41-102 LEVER HANDLE DOUBLE FEMALE 41-103 1/4 27.00 EXTRA HEAVY PATTERN TEE HANDLE DOUBLE FEMALE 1/8 32.00 41-200 41-202 1/4 32.00 TEE HANDLE DOUBLE FEMALE HEXAGON SHOULDER 41-222 1/4 38.00 TEE HANDLE MALE AND FEMALE 1/4 20.00 41-250
42-100 Series
Drain Cocks Rough brass construction; rated for 25 psig. • Sizes: 1/8", 1/4", 3/8" and 1/2"
Type Standard Nut Bottom
Satin Brass -01 -04
Model Number 42-101 42-102 42-103 42-104
Size (in.) 1/8 1/4 3/8 1/2
Orifice (in.) 3/16 1/4 3/8 3/8
Wt./100 (lbs.) 20.4 15.0 35.0 38.0
* see above suffix key
106
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing Specialties
43-100 Series
Steam Gauge Cocks Female fitting with male union for easy installation. • Rated 100 WSP for standard bottom, 150 WSP for nut version • Available in polished brass or satin brass finish Model Number 43-101
Wt./100 (lbs.) 45
Size (in.) 1/4
Designate (-05) suffix for polished brass; (-01) suffix for satin brass.
44-100 Series
Hose End Cocks Interior diameter hose sizes: 3/8" to 7/16" • 3/16" port; rated 25 psig • Available in polished brass or satin brass finish Model Number 44-101 44-102 44-103 44-104
Wt./100 (lbs.) 19 22 23 25
Size (in.) 1/8 1/4 3/8 1/2
Designate (-05) suffix for polished brass; (-01) suffix for satin brass.
46-100 Series
Standard Cocks Wrench operated model with square head and 125 psig rating. Sizes from 1/4" FNPT to 1" FNPT. Model Number 46-101-01 46-102-01 46-103-01 46-104-01 46-105-01
Contents | Back
Customer Service 1-704-841-6000
Wt./100 (lbs.) 33.0 30.0 48.0 66.0 173.8
Size (in.) 1/4 3/8 1/2 3/4 1
Prev. Page |
Next
107
Plumbing Specialties
Gas Cocks 50 Series
Manual Main Control Valves CSA design certified for 1/2 psig and temperatures from 32° to 125°F. Complies to ANSI Z 21.15.CGA 9.1-M97. • Factory tested 100% at 10 psig • Bronze construction, stainless steel springs Model Number 50-203 50-303 50-403 50-503 50-603 50-703 50-803
Size (in.) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 Handle Suffix Position
Wt./100 (lbs.) 88 156 197 300 478 845 1000
BTU/hr. 800,000 1,310,000 2,100,000 3,250,000 3,700,000 7,300,000 7,800,000 Size Pilot (in.) 1/8 NPT 1/4 NPT
• Capacities to 7.8 million Btu/hour • Equal female inlet/outlet
W 01 05
Dimensions B 1.44 1.69 2.19 2.75 3.31 3.72 3.72
A 2.50 2.94 3.94 3.66 4.37 5.44 5.87
X 02 06
Y 03 07
C 1.72 2.06 2.87 3.16 3.50 4.50 4.50
D 2.75 3.50 3.87 4.69 5.75 6.75 6.75
Z 04 08
All main burner valves furnished with 1/8” NPT pilot tapping. Valves 1” and larger can be furnished with 1/4” NPT pilot tapping.
51 Series
Gas Service Cocks Tee or lever handle cocks; CSA design certified. In sizes 1/4" to 3/4". • Capacities: 117,000 to 749,000 Btu/hour • Designed to meet ANSI Z21.15.CGA 9.1 requirements of 1/2 psig at temperatures from 32° F to
T-Handle with Stop
Lever Handle w/Stop
108
Contents | Back
125°F • Accepted for use in City of New York Department of Buildings MEA 45-90-M
Model Number 51-103-01 51-104-01 51-105-01 51-106-01
Pipe Size (in.) 1/4 3/8 1/2 3/4
Wt./100 (lbs.) 35 47 54 83
Capacity (BTU/hr.) 117,000 274,600 274,000 749,000
51-107-01 51-108-01 51-109-01
3/8 1/2 3/4
50 56 87
274,600 274,600 749,000
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing Specialties
Gas Service Cocks
52 Series
Available with tee head, flat head, square head or lever head in sizes from 1/4" to 1". Wrench operated and tested at 125 psig. • Nut and washer bottom with stop
T-Head
Flat Head
53 Series
• For operation up to 500°F
Model Number 52-101-01 52-102-01 52-103-01 52-104-01 52-105-01
Size (in.) 1/4 3/8 1/2 3/4 1
Wt./100 (lbs.) 32.0 29.0 45.0 65.8 92.9
52-201-01 52-202-01 52-203-01 52-204-01 52-205-01
1/4 3/8 1/2 3/4 1
30.0 28.0 43.0 57.0 90.6
Square Head
Lever Head
Model Number 52-301-01 52-302-01 52-303-01 52-304-01 52-305-01
Size (in.) 1/4 3/8 1/2 3/4 1
Wt./100 (lbs.) 31.0 28.0 43.0 62.7 90.0
52-401-01 52-402-01 52-403-01 52-404-01 52-405-01
1/4 3/8 1/2 3/4 1
34.3 31.0 46.0 66.7 97.0
Gas Cocks Available in male and female sizes: 1/8", 1/4" and 3/8". Model Number 53-299-01* 53-300-01* 53-301-01
Male Size (in.) 1/8 1/4 3/8
Female Size (in.) 1/8 1/4 3/8
Wt./100 (lbs.) 14.0 18.5 45.0
* Design certified by CSA to meet ANSI Z21.15.CGA 9.1 pressure requirements of 1/2 psig
54 Series
Gas Hose Cocks & Appliance Connector Valve CSA design certified brass and wood handled valves with 56,500 Btu/hour capacity.
Model Number 54-101-01 54-102-01 54-103-01 54-201-01 54-202-01
Pipe Size (in.) 3/8 1/2 3/4 3/8 1/2
Handle Brass Brass Brass 3/8 SAE 3/8 SAE
Wt./100 (lbs.) 41.0 34.8 40.0 36.0 33.4
Model Number 54-203-01 54-204-01 54-206-01 54-207-01 54-208-01 54-209-01 54-401-01 54-402-01
Pipe Size (in.) Handle 1/2 1/2 SAE 3/4 1/2 SAE 3/4 5/8 SAE 1/2 5/8 SAE 3/4 3/8 SAE 3/4 1/2 MNPT 3/8 *3/8 SAE 1/2 *3/8 SAE
Wt./100 (lbs.) 35.0 45.1 50.0 57.0 44.0 44.0 35.0 33.0
* Flared end threaded 9/16 thread
55-302 Series
Gas Cock with Throttle Adjustment Design certified by CSA • Designed to meet ANSI Z21.15.CGA9.1-M97 pressure requirements of 1/2 psig Model Number 55-302-01
Contents | Back
Customer Service 1-704-841-6000
• Thread size: 1/4 male x 1/4 female
Wt./100 (lbs.) 33
Size (in.) 1/4 M x 1/4 F
Prev. Page |
Next
109
Plumbing Specialties
56 Series
Pilot Cocks Wide variety of CSA design certified pilot cocks. Designed to meet ANSI Z21.15.CGA 9.1-M97 pressure requirements of 1/2 psig at temperatures from 32˚ to 125˚ F.
56-111-01
56-112-01
Model Number 56-111-01 56-112-01 56-221-01 56-222-01 56-302-01* 56-601-01 56-602-01 56-603-01 56-604-01
Thread Size 1/8 NPT x 1/4 Tube Plain 1/8 NPT x 1/4 Tube Throttle Adjust. 1/8 NPT x 1/8 FNPT Plain 1/8 NPT x 1/8 FNPT Throttle Adjust. 1/8 NPT x 1/4 Tube 1/8 NPT x 1/4 Tube Right Hand 1/8 NPT x 1/4 Tube RH Throttle Adjust 1/8 NPT x 1/4 Tube Left Hand. 1/8 NPT x 1/4 Tube LH Throttle Adjust.
Wt./100 (lbs.) 15.0 14.0 16.1 16.1 08.0 17.0 17.0 17.0 17.0
* Not CSA Certified
56-221-01
110
Contents | Back
56-302-01
56-602-01
Customer Service 1-704-841-6000
Prev. Page |
Next
Plumbing Specialties
Terms and Condition of Sale Payment: 2% 10th prox. Net 30 days. All prices F.O.B. Matthews, N.C., or Pageland, S.C., with freight allowed on shipments of 750 pounds or $4,000 net and over to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a receipt is furnished us by the carrier. No Invoice Rendered For Less Than $50.00. No freight will be allowed on Air Freight, Air Express, Parcel Post or U.P.S. shipments.Other Conbraco Products may be combined to make sufficient weight for full freight allowance. Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice. Orders for material or special design or specification are made to customer’s order and are not subject to cancellation or return. Goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained. All goods returned – if accepted – will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses.We reserve the right to adjust orders to box quantities.
Warranty and Limitations of Liability Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of one year from the date of delivery to you, our initial purchaser. Should any failure to conform to this warranty appear within one year after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco's recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco's own expense. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether express or implied shall pass through our initial purchaser to any other person or corporation. LIMITATION OF LIABILITY: Conbraco Industries, Inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGE TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE CONBRACO GOODS UPON WHICH SUCH LIABILITY IS BASED.
Contents | Back
Customer Service 1-704-841-6000
Prev. Page |
111
