Combined machine 50 tons press and hot stamping Typ: HPP 170

Figure Optional: Shelf storage and undertable

Heating capacity: 1.5 KW/230Volt 50 tons press 350 Bar Temperature: 180-200 ° C 1.5 kW hydraulic motor 2 x 25 tons hydraulic cylinder

The figure shows the hot stamping / press shows with all optional accessories.

Hot Stamping machine Typ: HP170

HP-115 (Timer)

HP-115

HP-170

Siemens controller: - PID controller - PT-100 temperature sensor - Impeller monitoring - Run function - Display of actual and set temperature

35 -50 to hydraulic press

Embossing tools for the 35-50 to press

Matching embossed frame (optional). Different font shapes and sizes are possible. Security features. Versions: aluminum, plastic or stainless steel

Stamping part for 35-50 to press. According to individual requirements of the customer

Semi-automatic embossing machine ASP-9 The PC controls the flow of your stamping series

The embossing of the plates is automatic in the ASP-9. Is the ASP-9 we finished half or as fully automatic machine.

The series sequence is loaded into the PC, the can via USB, Ethernet or even through the Internet connections made. After the sequence table is loaded, is the fully automatic operation of your stamping series. Only the blank plate, the operator must Inserting and again a few seconds later refer. When fully automatic ASP-9 eliminates this process, since the supply and removal fully automatically.

• There depending on size and font tags, up to 9 characters on the blank will be marked • The die is fully equipped Magazine AZ ,0-9 • Safety features are optional or commemorative coin • Laser markers before or after the embossing process • Fully automatic hot stamping after the stamping process • Single or double impression depending on the sheet thickness are optional • Serienpägung or single sign • Pair Singel or embossing • Display the still dominant signs and parts counter • Transfer of the series by the office directly to the machine • QA features can be drawn by ink jet or engraving laser at or below the sign

The system is controlled by the latest servo technology. Latest Profinet communication ensures fast response times.

Semi-automatic embossing machine ASP-9 The PC controls the flow of your stamping series

PC supervised control and display of the running cycle of the stamping table series. For XP and Win 7. Automatic specification but also a single sign can be embossed.

Simple and secure work for the operator. All parameters are displayed on the PC and the course of the series. Safety light curtain to protect the operator. Safety stop in the inlays. Fast start by the photoelectric signal.

Easily produce your signs embossing!

Automatic video monitoring and de-stacker ACS Camera surveillance system to control plates production

.

The operations of the punch press plates fall on the conveyor belt. Further transport promotes the signs in the video booth. A computer assisted camera system will know the signs made by QA criteria. After sorting is done, the camera Separation of the shield in the IO or NIO box. After reaching the number of signs will stack according to the specification removed for packaging. From cycle times up to 60 cycles / min.

Variable belt speed for the conveyor belt. Variable inlet on the videotape with setting the width plates.

Automatic video monitoring and de-stacker ACS Camera surveillance system to control plates production

Quality control of the car plate Length and width measurement Label and position monitoring slide control

Specification of the belt speeds Display of boxes and total number Specification of the stack height of the signs packages

Filing of the shield in the IO - or NIO Box

Control of the car after your shield QA requirements. Automatic stack of plates in the appropriate storage box.

Production Line To prepare the car license plates

For different sizes and foils As semi-or fully automatic machine Combined with the stacker ACS Up to 60 license plates per minute with normal reflective foil

Laminate with diagram, for different foils.

Hydraulic Press 50 t Stroke up to 60 plates per minute Security laser as option

For all applications for the production of carplates

Ask us we will make you an offer for your application!

Security License Plates According to DIN 74069 and ISO 7591 car plates based on chromated aluminium and multilayer reflective sheeting. Additional to this basic security materials we offers several solutions of security features to protect it against duplications, counterfeiing or any other manipulations.

Hologram Holograms are customized design elements with changing optical images. Holographic products provide effective and lasting protection against counterfeiting

Laser Image The Lasermark LI 30° is visible only within a specific viewing angle range. The marks are extremly difficult to counterfeit or imitate.

Hot-Stamping-Foil Inscription The individual inscription of the Hot-Stamping-Foil is also an option to make the plate more save with the side effect of more attractivety.

We supply hot stamping foil and accessories you need for car plate.

We manufacture and develop your application. Machines for making license plates • • • • • •

Worldwide use Worldwide Distributors Custom fabrication of a machine for your application Fully automatic production safety Features laser Engraving

TESCHO Automations GmbH Auf dem Molzberg 2 D- 57548 Kirchen Tele:(49) 2741-94944-90 Fax: (49) 2741-94944-92 Email: [email protected] www.tescho-gmbh.de