Solutions for Progress...Elements for Life...

BSI Cosmetic Ingredients

Color Cosmetic Kits NYSCC Suppliers Day 2015

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/13

 

BSI Cosmetic Ingredients

Under Eye Illuminator - 03-038 Ingredients:

% W/W

Phase A Isoamyl Laurate (Radia 7750) …………………………………………...…………...... 23.95 C26-28 Alkyl Dimethicone (BELSIL® CDM 3526) ….…………………...................... 2.00 Polyhydroxystearic Acid (Kester Wax K-60P #484) …………………..…….............. 2.00 Microcrystalline Wax (and) Paraffin (Ozokerite 2095 #578) …………………….…. 15.00 C32-36 Isoalkyl Stearate (Branched Kester Wax BK-40 #197) .....……………....… 2.00 Cetyl Lactate (Ceraphyl™ 28) …...………………………………………………...…… 5.00 Argania Spinosa Kernel Oil (Virgin Argan Oil TX 8121) …...…...……………….…. 3.00 Trimethylsiloxyphenyl Dimethicone (BELSIL® PDM 20) ….………………………..... 3.00 Isostearyl Neopentanoate (Ceraphyl™ 375) …...………………………………..…… 5.00 Dimethicone (and) Vinyldimethyl/Trimethylsiloxysilicate/ Dimethicone Crosspolymer (BELSIL® REG 1100) …...........…………….…. 5.00 Phase B Talc (3460 Suprafino H) …………………………..………………………….……......... Titanium Dioxide (and) Dimethicone (ST 1944) ……………………..……….…….…. Polymethyl Methacrylate (8203 PMMA S) ………….…………………………..…...… Synthetic Fluorphlogopite (2284 Mica Snow 600) ………...……………………..…… Phase C Synthetic Fluorphlogopite (and) Titanium Dioxide (and) Iron Oxides (Sumicos Autumn Sunset SM636) ………...…..…………..……………..... Mica (and) Titanium Dioxide (and) Iron Oxides (Prestige Beige 35272) ………....... Mica (and) Titanium Dioxide (and) Iron Oxides (Prestige Sun Gold 35158) ……..… Phenoxyethanol (and) Caprylyl Glycol (Optiphen®) ……………………………...…... Hydroxytyrosol (HTEssence Liquid) .………….………...…………………………...... Olus Oil (and) Aloe Barbadensis Leaf Extract (and) Bisabolol (and) Squalane (and) Carotenoids (and) Rheum Rhaponticum Root Extract (and) Dimethylmethoxy Chromanyl Palmitate (and) Glabridin (and) Tocopherol (Evoil® Hydracare Lightening TX 8433) ……………..………………..……

Supplier BSI - Oleon BSI - Wacker BSI - Koster Keunen BSI - Koster Keunen BSI - Koster Keunen BSI - Ashland BSI - Textron BSI - Wacker BSI - Ashland BSI - Wacker

8.00 5.00 3.00 6.25

BSI BSI BSI BSI

1.40 0.50 3.40 1.00 0.50

BSI - Sudarshan BSI - Sudarshan BSI - Sudarshan BSI - Ashland BSI - Wacker

5.00

BSI - Textron

Procedure: • Phase A- Heat Phase A Radia 7750 and Ozokerite 2095 to 90 - 95°C. Mix well until uniform and wax is melted. Cool batch to 80 - 85°C and add remaining ingredients individually, mixing well in between additions. • Phase B - In a separate container preblend Phase B, add blend to main tank slowly to avoid aeration. Cool batch to 70 - 75°C. • Phase C - Add Phase C ingredients individually, mixing well after each addition. Pour immediately into containers.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-038

BSI Cosmetic Ingredients

Under Eye Illuminator - 03-038 Continued About the Ingredients: HTEssence: Nature-identical hydroxytyrosol. Hydroxytyrosol is a highly active antioxidant that has benefits in lightening and anti-aging applications. Evoil Hydracare Lightening: Blend of natural plant oils and vegetable synergetic active ingredients designed to help reduce skin pigmentation and nourish the skin. BELSIL® REG 1100: A silicone resin elastomer gel that has a cushiony or velvety feel on skin and improves product spreadability. BELSIL® REG 1100 also provides a long-lasting non-tacky film, enhancing water and transfer resistance of the formulation. Mica Snow: The high purity (low lead) of Synthetic Fluorphlogopite makes it especially desirable for lip and eye area applications. It has a soft, silky skin feel and enhances products by providing an elegant shimmery look and glossy luster. BELSIL® CDM 3526: Alkyl-modified silicone that creates a protective layer to prevent transepidermal moisture loss and helps the skin stay supple and smooth. Ozokerite 2095: A hard, high melt point wax blend consisting of branched and linear hydrocarbons that have been refined for improved performance and consistency. Ozokerite 2095 is commonly used as a gelling agent for low viscosity oils, silicones and esters. Ozokerite 2095 is also used as a thickener, viscosity modifier, to add hardness and slip, and as a melting point modifier. Ceraphyl™ 28: Ester that enhances slip and increases pay -off and has a non-oily, non-greasy after-feel. Ceraphyl 28 imparts sheen and silkiness to skin and reduces tack. Kester Wax K-60P: A soft and pliable polyester wax that is naturally derived from castor oil. Kester Wax K -60P is ideal for creating creamier textures while increasing the stability of your product. A vegan beeswax substitute can be made when combining 40 - 50% of K-60P with 50 - 60% of Kester Wax K-62. BELSIL® PDM 20 & 1000: Phenyl Dimethicones are most widely used as shine enhancing additives. Additionally, they provide an anti-tack benefit to formulations. Ceraphyl™ 375: Improves product spreadability and playtime; imparts elegant, light, non -oily feel. PMMA-S: A fine white solid sphere that produces a “ Soft Focus Effect” . PMMA-S imparts a ball bearing effect, increasing the payoff when used in powdered applications. Sumicos SM (Synthetic Mica) Pigments: Pearlescent pigments based on synthetic fluorphlogopite. Sumicos SM pigments provide high luster and sparkle to formulations. Prestige Earth Tone Pigments: Neutral, earth-tone pearlescent pigments based on natural mica. Provide exceptional coverage and work well to create various skin tones.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-038

BSI Cosmetic Ingredients

Brow Pudding - 03-052 Ingredients: Phase A Deionized Water …………………………………………………….……...……........... Hydroxyethlcellulose (Natrosol™ 250 HHR CS) …..…………………….................. Triethanolamine…………….……………………………………………………….…… Glycerin ……………………………………………………………………..………........ Phase B Dimethicone (BELSIL® DM 1 Plus) ..………………………..………………….…..… Cyclopentasiloxane and Dimethicone/Vinyltrimethylsiloxysilicate Crosspolymer (BELSIL® RG 100) ………………………………………………………….… Phenoxyethanol (and) Caprylyl Glycol (Optiphen 200) ……………………….…...... Mica (and) Iron Oxides (Sumicos Titan Bronze 43730) ………....……………..…… Iron Oxides (Sumicos Black 2230C) …………………………….....…………..…...…

% W/W 63.74 0.25 0.01 1.00 10.00 5.00 1.00 0.50 0.25

Phase C Carnauba Wax (and) Stearoxy Dimethicone (and) Dimethicone (and) Phospholipid (and) Phenoxyethanol (and) Caprylyl Glycol (and) Hexylene Glycol (and) Water (Siliconyl Carnauba Milk #558) ………..……………..…………..…… 10.00 VP/Dimethylaminoethyl Methacrylate Copolymer (Copolymer 845-O) …………..… 1.00 Illite (Cocoa Colored Clay) …………………………………………………………..… 5.00 Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 (RapiThix® A-60) ……………………………………….……………….…...… 1.25

Supplier

BSI - Ashland

BSI - Wacker BSI - Wacker BSI - Ashland BSI - Sudarshan BSI - Sudarshan

BSI - Koster Keunen BSI - Ashland BSI - Zeus Quimica BSI - Ashland

Procedure: • Phase A - Add Phase A Deionized Water to main container, begin moderate to high speed propeller mixing. Sprinkle in Natrosol 250 HHR, add Triethanolamine to raise pH to 8.5 and mix well until fully dissolved. Add Glycerin, mix well. • Phase B - In a separate container preblend Phase B, add blend to main tank, mix well. • Phase C - Add Phase C ingredients individually, mixing well after each addition until product becomes a smooth gel.

About the Ingredients: BELSIL® RG 100: This translucent silicone resin gel provides a unique, cushiony skin feel and dries to a matte finish. It enhances water resistance and is a substantive film former providing transfer resistance. Siliconyl Carnauba Milk: A stable dispersion of Carnauba Wax with unique formulating advantages. This dispersion couples the properties of Carnauba Wax with silicones to produce a multifunctional performance additive designed for cold process formulations. Copolymer 845: A high molecular weight derivative of PVP that provides good high humidity hold with a low tack and smooth feel. Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-052

 

BSI Cosmetic Ingredients

Illuminating Eye Crayon - 03-040 Ingredients: Phase A Polyhydroxystearic Acid (Kester Wax K-60P #484) …………………..……............ Stearyl Behenate (and) Cetyl Stearate (and) Stearyl Stearate (Kester Wax K-62 #130) ………………………...……………..….…….….. Di-C-20-40 Alkyl Dimer Dilinoleate (Kester Wax K-82D #167) .....……….…….…. Trimethylsiloxyphenyl Dimethicone (BELSIL® PDM 20) ….……………………....... Dimethicone (and) Vinyldimethyl/Trimethylsiloxysilicate/Dimethicone Crosspolymer (BELSIL® REG 1100) ….............………………………...… Isodecyl Neopentanoate (Ceraphyl™ SLK) …...………………….………….…..… Olea Europaea (Olive) Husk Oil (Pomace Olive Oil TX 8066) ….…………….….. Phase B Talc (and) Dimethicone (ST 1925) …………………………………………………..... Synthetic Fluorphlogopite (2282 Mica Snow 120) ………...……………………….… Titanium Dioxide (325 Hombitan FF Pharma) ………….…………………...…….…. Polymethyl Methacrylate (8203 PMMA S) ……...……………………..……….......… Iron Oxides (Red Iron Oxide

% W/W

Supplier

7.00

BSI - Koster Keunen

7.50 7.00 3.00

BSI - Koster Keunen BSI - Koster Keunen BSI - Wacker

7.00 4.00 5.00

BSI - Wacker BSI - Ashland BSI - Textron

5.00 5.00 5.00 3.00

BSI BSI BSI BSI

Phase C Mica (and) Titanium Dioxide (and) Tin Oxide (and) Ferric Ferrocyanide (and) Carmine (Prestige Amethyst 35320) ……….....………….………………..… 6.00 Mica (and) Titanium Dioxide (Sumicos Flash Violet HG356) ……………………...… 3.00 Synthetic Fluorphlogopite (and) Titanium Dioxide (and) Carmine (and) Iron Oxides (Sumicos Radiant Orchid SM336) ………...………………....… 4.00 Phenoxyethanol (and) Caprylyl Glycol (Optiphen®) ……………………………..….... 1.00 Cyclopentasiloxane (BSI Cosmetic Silicone CPS D5) ……...................................... 27.00

BSI - Sudarshan BSI - Sudarshan BSI - Sudarshan BSI - Ashland BSI

Procedure: • Phase A - Heat Phase A to 80 - 85°C. Mix well until uniform and waxes are melted. Maintain temperature at 75 - 80°C. • Phase B - In a separate container pre-blend Phase B, add blend to main tank slowly to avoid aeration. Cool batch to 65 - 70°C. • Phase C - Add Phase C ingredients individually, mixing well after each addition. Pour immediately into containers.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-040

BSI Cosmetic Ingredients

Illuminating Eye Crayon - 03-040 Continued About the Ingredients: BELSIL® REG 1100: A silicone resin elastomer gel that has a cushiony and velvety feel on skin and improves product spreadability. BELSIL® REG 1100 also provides a long-lasting non-tacky film, enhancing water and transfer resistance of the formulation. Kester Wax K-60P: A soft and pliable polyester wax that is naturally derived from castor oil. Kester Wax K -60P is ideal for creating creamier textures while increasing the stability of your product. A vegan beeswax substitute can be made when combining 40 - 50% of K-60P with 50 - 60% of Kester Wax K-62. Kester Wax K-62: An NPA certified, medium chain ester wax. The primary advantages of Kester Wax K -62 are its excellent oil gelling and oil binding capabilities, and its broad compatibility with lipid cosmetic ingredients. It is recommended as an emollient, thickener, gellant and opacifier. Kester Wax K-82D: High molecular weight ester with strong gelling properties for silicones and cosmetic oils. K-82D also provides slip and excellent skin feel. ST1925: Treating talc with dimethicone adds many benefits to cosmetic and skin care products. The primary benefits are: high water repellency, soft feel and lubricity on skin, better adhesion, higher compressibility and spreadability. Mica Snow: The high purity (low lead) of Synthetic Fluorphlogopite makes it especially desirable for lip and eye area soft, silky skin feel and enhances Ceraphyl™ SLK: A light and non-greasy ester with a soft, silky touch on the skin. It is a low molecular weight, lowviscosity ester that offers superior reduction of the oily or heavy feeling in formulations. Skin care products formulated with Ceraphyl™ SLK apply to the skin smoothly leaving it feeling soft and elegant. Pomace Olive Oil: A natural vegetable oil that comes from the olive’s husk. It possesses excellent emollient properties and has a superior moisturizing effect on the skin. Pomace Olive Oil also provides excellent skin care properties such as smoothness and lubricity. PMMA-S: A fine white solid sphere that produces a “ Soft Focus Effect” . PMMA-S imparts a ball bearing effect, increasing the payoff when used in powdered applications.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-040

BSI Cosmetic Ingredients

HD Illuminating Face Powder - 03-072 Ingredients:

% W/W

Phase A Talc (and) Dimethicone (ST 1925) …………………………………………………..… 46.00 Synthetic Fluorphlogopite (2284 Mica Snow 600) ………...…………………….…… 25.00 Titanium Dioxide (and) Dimethicone (ST 1944) …………………………………....... 5.00 Magnesium Stearate (910-G Magnesium Stearate FCC - Vegetable) ………...… 5.00 Silica (and) Lauroyl Lysine (8210 Soft Sphere LL) ……...……..…..…………....…… 5.00 Iron Oxides (Brown Iron Oxide)….…………………………………………………...…. 0.25 Iron Oxides (Yellow Iron Oxide) ...….………………………………………………...… 0.25 Phase B Octyldodecyl Stearoyl Stearate (Ceraphyl™ 847) …...………………….……..…….. Octyldodecyl Stearate (Ceraphyl™ ODS) …...………………….………………..….. Trimethylsiloxysilicate (BELSIL® TMS 803) ….……………………….……………..... Isopropylparaben (and) Isobutylparaben (and) Butylparaben (LiquaPar™ Oil) ..… Phase C Mica (and) Titanium Dioxide (and) Iron Oxides (Prestige Beige 35272) ………....… Mica (and) Iron Oxides (Prestige Soft Bronze 35339) ………………………..…….… Synthetic Fluorphlogopite (and) Titanium Dioxide (and) Iron Oxides (Sumicos Autumn Sunset SM-636) ………………….……………….…...... Synthetic Fluorphlogopite (and) Titanium Dioxide (and) Iron Oxides (Sumicos Sunset Mist SM-632) ……………..…..………...……………..…..

Supplier BSI BSI BSI BSI BSI

3.00 3.00 1.00 0.50

BSI - Ashland BSI - Ashland BSI - Wacker BSI - Ashland

1.00 2.00

BSI - Sudarshan BSI - Sudarshan

1.00

BSI - Sudarshan

2.00

BSI - Sudarshan

Procedure: • Phase A - Pre-blend Phase A ingredients until titanium dioxide and iron oxides are completely dispersed. • Phase B - In a separate container pre-blend Phase B, add blend to main tank with mixing. Blend until wet binders are evenly dispersed. • Phase C - Add Phase C ingredients to main tank and blend at low mixing speed. Press into tins.

About the Ingredients: ST1925: Treating talc with dimethicone adds many benefits to cosmetic and skin care products. The primary benefits are: high water repellency, soft feel and lubricity on skin, better adhesion, higher compressibility and spreadability. Mica Snow: The high purity (low lead) of Synthetic Fluorphlogopite makes it especially desirable for lip and eye area applications. It has a soft, silky skin feel and enhances products by providing an elegant shimmery look and glossy luster. Ceraphyl™ 847 and Ceraphyl™ ODS: Elegant feeling esters that when blended at a 1:1 ratio provide exceptional pigment dispersing and powder binding properties. Sumicos SM (Synthetic Mica) Pigments: Pearlescent pigments based on synthetic fluorphlogopite. Sumicos SM pigments provide high luster and sparkle to formulations. Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-072

 

BSI Cosmetic Ingredients

Naturally Nourishing Lipstick - 03-046 Ingredients:

% W/W

Supplier

Phase A Olea Europaea (Olive) Husk Oil (Pomace Olive Oil TX 8066) ….………….…...…. 40.00 Persea Americana (Avocado) Oil (Refined Avocado Oil TX: 8222) …..….........… 3.00 Argania Spinosa Kernel Oil (Virgin Argan Oil TX: 8121) …...…...…………….…... 3.00 Isocetyl Stearoyl Stearate (Ceraphyl™ 791) …...…………….….………………….… 7.00 Lauryl Laurate (Kester Wax K-24 #358) .....……….….…..…………………………... 5.00 Theobroma Cacao (Cocoa) Seed Butter (Cocoa Butter Deodorized #286) ............. 3.00 Polyhydroxystearic Acid (Kester Wax K-60P #484) …………………..……............... 3.00 Beeswax (NF Beeswax Yellow #423) ………………………………….……................ 7.00 Helianthus Annuus (Sunflower) Seed Wax (Sunflower Wax #258) .....................… 11.00

BSI - Textron BSI - Textron BSI - Textron BSI - Ashland BSI - Koster Keunen BSI - Koster Keunen BSI - Koster Keunen BSI - Koster Keunen BSI - Koster Keunen

Phase B Sericite (and) Magnesium Myristate (ST2610) ……………………………...……..…. Titanium Dioxide (325 Hombitan FF Pharma) ………….…………………...…….….. Iron Oxides (Red Iron Oxide) ……………………………..…………………………..… Silica (8208 Soft Sphere P) …………………………………………………..……........

3.00 3.00 3.00 1.00

BSI BSI Color Technologies BSI

5.00

BSI - Sudarshan

2.00 1.00

BSI - Sudarshan BSI - Ashland

Phase C Mica (and) (and) Iron Oxides (Prestige Fire Red 35153) ………………………….…. Mica (and) Titanium Dioxide (and) Tin Oxide (and) Carmine (Prestige Ruby 35159) …………………………………………………...….… Phenoxyethanol (and) Caprylyl Glycol (Optiphen®) ………………………….……..….

Procedure: • Phase A - Heat Phase A to 75 - 80°C. Mix well until uniform and all waxes are melted. Maintain temperature at 75 - 80°C. • Phase B - In a separate container preblend Phase B, add blend to main tank slowly to avoid aeration. Cool batch to 70 - 75°C. • Phase C - Add Phase C ingredients individually, mixing well after each addition. Pour immediately into containers.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-046

BSI Cosmetic Ingredients

Naturally Nourishing Lipstick - 03-046 Continued About the Ingredients: Kester Wax K-60P: A soft and pliable polyester wax that is naturally derived from castor oil. Kester Wax K -60P is ideal for creating creamier textures while increasing the stability of your product. A vegan beeswax substitute can be made when combining 40 - 50% of K-60P with 50 - 60% of Kester Wax K-62. Ceraphyl™ 791: Ecocert emollient that is ideal for achieving maximum after -feel in lip care products, skin creams, and lotions, and color cosmetics. It goes on dry but delivers a lubricious and lasting touch. ST 2610: Magnesium Myristate coated micas are an alternative to silicone treated powders. It gives excellent water repellency and has good affinity to the skin. It produces good slip and prevents caking. Kester Wax K-24: A plant-based low molecular weight very pure monoester. It has application as a slip agent and skin penetrating agent for anhydrous systems. K-24 can replace many ester oils in cosmetic formulas and provide a smooth non-greasy feel. It can also be used as a natural binder for pressed powders. Pomace Olive Oil: A natural vegetable oil that comes from the olive’s husk. It possesses excellent emollient properties and has a superior moisturizing effect on the skin. Pomace Olive Oil also provides excellent skin care properties such as smoothness and lubricity. Argan Oil: Rich in essential unsaturated fatty acids like Oleic and Linoleic. Its biochemical analysis can be compared with that of Olive Oil; however, Argan Oil is richer in Linoleic (Omega-6) and Tocopherol which are the most important features. Essential fatty acids have a very important biological role in helping to avoid early aging and the loss of skin elasticity. Soft Sphere P: A spherical silica that imparts smoothness, soft focus effect, and a fine touch. Sunflower Wax: An Ecocert crystalline vegetable wax obtained via winterization of sunflower oil. It exhibits a high melting point which imparts hardness, texture and strength to sticks and emulsions. Sunflower wax also possesses excellent gelling capabilities. Prestige Fire Red: Ecocert compliant pearlescent pigment based on natural mica. Prestige Fire Red adds a deep, blazing red hue to color cosmetics. Prestige Ruby: Pearlescent pigment based on natural mica that adds a soft shimmer in a deep pink hue. Cocoa Butter: Koster Keunen Cocoa Butter is American refined and non -chemically processed. Cocoa Butter imparts excellent moisturizing and emollient properties to color cosmetic and skin care formulations.

Brenntag Specialties, Inc. (BSI) makes no warranty, express or implied, including any warranty of merchantability, non-infringement or fitness for a particular purpose, concerning the composition or use of these formulas. User assumes all risks and responsibility resulting from such use and the handling, use, storage, transportation, sale or resale of any product made therefrom. BSI assumes no obligation or liability for any technical advice given by it relating to the formulas or the results obtained therefrom, all such advice being given and accepted at user’s sole risk. User waives all claims against BSI for damages, including consequential and punitive damages, even if BSI has been advised or has notice of the possibility of such damages, and user agrees to defend and indemnify BSI against any loss, damages, liability, cost and expense, relating to the use of the formulas and the handling, use, storage, transportation, sale or resale of any product made therefrom. For additional information, please contact Technical Services at 1-800-732-0562.

• Brenntag Specialties, Inc. • 1000 Coolidge St. • South Plainfield, NJ 07080 • Issued: 5/15

03-046