clean and green QuickStart® is easy to install, and setup is a snap

QuickStart Control Panel

Good to go QuickStart lives up to its name in every respect. Easy to install, simple to set up, and rock-solid when it comes to performance, this system is an installer’s dream. QuickStart lets you choose one of three easy programming methods: our exclusive auto-learn routine, front panel programming combined with its built–in scanner barcode port, or the laptop configuration utility.

QS4 Intelligent/Conventional Control Panel

Meet the family Three models make up the QuickStart family. As a hybrid system, QS4 combines support for up to 1,000 intelligent detectors and modules along with as many as 48 conventional Class B or a combination of 40 Class A and Class B initiating device circuits (IDCs). QS1 supports intelligent circuits only, and has capacity for 250 intelligent detectors and modules. Both QS4 and QS1 take full advantage of EST’s exclusive Signature Series technology, which provides electronic addressing, automatic device mapping, environmental compensation, and true multisensor detection. The third member of the QuickStart family is the QSC conventional-only panel. The QSC provides up to 48 Class B

or a combination of 40 Class A and Class B IDCs. With builtin support for the innovative C2M family of smoke detectors, even QSC and QS4 hard-wired circuits are anything but conventional. C2M devices reduce false alarms with multicriteria detection and drift compensation, and offer innovative maintenance features including a “hands-free” sensitivity test and replaceable optical chamber.

Flexible With QuickStart the possibilities are truly endless: schools, hospitals, retail and office facilities, apartment buildings, and factories are just a few of the applications QuickStart was specifically designed to meet. Add in our Signature Series

QSC Conventional Control Panel

QS1 Intelligent Control Panel

and Genesis devices and your system becomes a life safety powerhouse.

Best of both worlds With options that support intelligent or conventional circuits, or a mixture of both, QuickStart is an ideal solution for new and retrofit applications alike. Retrofit applications enjoy the best of both worlds. QuickStart’s support for both intelligent and conventional circuits ideally positions this innovative line of control panels for upgrading an existing system all at once or in stages. The choice is no longer limited by the hardware. In fact, Signature Series’ unique ability

to use existing wiring means costly rewiring is not required in most cases. If the wiring is trouble free and meets CEC Section 32 guidelines, it is ready for Signature Series, saving time and money. QuickStart is the kind of system you can turn your back on and walk away from, secure in the knowledge you won’t be back any time soon. Installations are kept simple with re-use of existing wire, quick programming, easy system expansion, and outstanding reliability. QuickStart’s fail-safe mode provides even further reliability by ensuring the system will activate its signals and dialer in the event of an alarm – even if the CPU loses communications with the other modules in the cabinet. It’s like having a backup fire watch built into every panel!

Mix and Match… With QuickStart you no longer have to make the commitment to either conventional or intelligent. The QS4 lets you specify conventional now, upgrade to intelligent devices later, or put Signature Series into a new addition and keep existing devices in the rest of the building. The choice is yours.

Class A notification appliance circuit with Genesis Signals & signal master for independent horn & strobe control and synchronization over two conductors.

1 Pr.

24 Vdc 1 Pr.

1 Pr.

Class A Signature data loop 1

The power of intelligent processing

Fire damper Signature data loop 2 (optional)

Waterflow switch Sprinkler supervisory switch

Signature data loop 3 (optional)

New construction

Have it both ways!

Critical process monitoring with control

Elevator capture

Signature data loop 4 (optional)

1 Pr.

1 Pr.

Class B notification appliance circuit with Genesis horn & strobes over 2 conductors.

Existing structure

The convenience of conventional wiring

Initiating device circuit - Class A

1 Pr.

Initiating device circuit - Class B Class B notification appliance circuit with Genesis signals & signal master and synchronization over two conductors Notification appliance circuit - Class A with combination horn-strobe circuit

1 Pr.

1 Pr.

2 Pr.

1 Pr.

Integrity horn-strobe

2-wire smoke detector

End-of-line resistor

Control relay module

Genesis horn-strobe

Smoke detector with relay base

Progammable I/O module

Signal module

Genesis signal master

Smoke detector with isolator base

Universal I/O module

Riser monitor module

Smoke detector

Manual pull station

Dual circuit input module

At a glance QuickStart control panels are as simple to operate as they are to set up. The front panel display provides 14 lines of text for QS4 and QS1 (intelligent) panels, and four lines of text for the QSC (conventional) panel. Its large backlit LCD display provides easy-to-understand details concerning up to 1,000 system events, while bright system status LEDs and large, tactile control buttons present a clean, crystal clear interface. Four password levels limit control and information retrieval to authorized personnel, and a priority access keyswitch gives instant control to management and emergency response personnel. Up to eight mirrored remote annunciators reflect front panel messages and status indicators over an RS-485 connection. Annunciators may be configured for Class A or Class B wiring.

QuickStart Highlights... • Microprocessor-based with built-in programmer • Fail-safe mode ensures uncompromised reliability • Class A (Style 7) or Class B (Style 4) wiring options • Capacity for eight remote annunciators • Two alarm, trouble, and supervisory contacts • Smart selection of dialer messages • Three programming methods: 1) QuickStart “Auto-learn” 2) Front panel programming 3) Configuration Utility • Optional bar code scanner for direct device data entry • Optional front panel switches with dual LEDs • Multiple cabinet sizes, surface or semiflush mounting • Four password levels, plus priority access keyswitch • Message routing by event type or by individual message • Alarm/Pre-alarm sensitivity by time of day or manual selection • 1,000 event history buffer, plus alarm history counter • 6 amp Power Supply, 4.75 amps available for external use

QuickStart features support for as many as eight remote annunciators, which reflect front panel messages and status indicators.

QuickStart’s clear, easy-to-read LCD display and 1,000 event history ensure that you have all the information you need.

Signature Series 4D Multisensor Detector

Signature Series 270 Pull Station

Genesis GC Series Speaker/Strobe

Genesis G4 Series Speaker/Strobe

Genesis G1 Series Horn/Strobe

Models of discretion

Good thinking

All QuickStart panels feature generous 6 amp power supplies to support the award-winning Genesis family of notification appliances. Genesis represents the evolution of fire alarm signals, offering a discrete alternative to bulky devices. About the size of a deck of cards, Genesis models feature clean modern lines, so that they blend inconspicuously with their surroundings.

New installations benefit from the widely acclaimed Signature Series® family of intelligent devices. Signature Series multisensor detectors interpret information from several sources to arrive at a considered conclusion. This means that a single multisensor detector can distinguish between a harmless puff of dust and a wisp of smoke; between hot, humid weather and a serious life safety condition.

Though designed for discretion, Genesis signals are also engineered to command attention when needed. Wallpenetrating high dB output and patented FullLight® strobe technology immerse the protected area with levels of light and sound that simply can't be ignored — all in exchange for the lowest current demands of any device in their class.

Now no job is too small for true multisensor technology, environmental compensation, electronic addressing, and the power of intelligent processing that, before QuickStart, was the exclusive domain of big systems. The result, regardless of system size QuickStart installations deliver the false alarm immunity, lightning fast response, and product reliability proven with Signature Series Technology.

With Genesis horn-strobes you also save on wiring costs, thanks to exclusive technology that delivers independent horn control over just a single pair of wires. This important and highly desirable feature makes it possible to silence the horns while the strobes remain active.

Which QuickStart panel is right for you? QSC Conventional

QS1 Intelligent

QS4 Intelligent/Conventional

0

1 x 250

4 x 250

Conventional Class B circuits supported

3 x 16

N/A

3 x 16

Conventional Class A circuits supported

5x8

N/A

5x8

LCD display (lines x characters)

4 x 20

14 x 16

14 x 16

Optional zone switch/LEDs on front panel

2 x 30

1 x 30

2 x 30

Option card spaces

5 or 12

1

5 or 1

Signature Series devices supported

Covering all the bases... Canada T 519 376 2430 F 519 376 7258 U.S. T 888-378-2329 F 866-503-3996 Asia T 852 2907 8108 F 852 2142 5063 Australia T 61 3 9259 4700 F 61 3 9259 4799

For the owner

For the installer

Simple to operate

Room to grow

Backlit LCD display, system status LED’s and tactile control buttons promote easy understanding and a clean interface.

QuickStart supports up to 1000 Signature Series intelligent devices, built-in notification appliance circuits, plus up to 48 conventional circuits.

Eliminate costly nuisance alarms

Easy expansion

Signature Series multi-sensor detectors compensate for environmental changes as well as dust and dirt.

QuickStart’s modular design allows option cards to snap onto easily accessible DIN mounting rails. Cards include a dual line dialer, relays and additional I/O modules.

Reduced maintenance costs Detailed reports pinpoint detectors that require cleaning.

All the flexibility you need

Reliable Central Monitoring connection

QuickStart systems handle intelligent and conventional circuits, and can be upgraded all at once or in stages. Retrofit applications are efficient and cost effective.

Europe T 32 2 725 11 20 F 32 2 721 86 13

QuickStart’s dual line dialer provides assurance that alarm, supervisory and trouble conditions reach your Central Monitoring Station.

Latin America T 305 593 4301 F 305 593 4300

Four password levels

www.gesecurity.com © 2006 General Electric Company All Rights Reserved

Limit control and information retrieval to authorized personnel. A priority access key switch allows user-level access, without a password.

History reports Provide up to 1000 event messages to either the LCD or printer.

EST, Signature Series, and Genesis Series are registered trademarks of GE Security, Inc.

Built-in compare utility

Printed in Canada.

QuickStart fail-safe mode

Simplifies test requirements when system upgrades or changes are made.

In the event of a CPU failure, an alarm will activate all signals and will transmit a default alarm message to the monitoring station.

Quality and Value QuickStart delivers the very best technology at an affordable price. Quality and reliability are built into every component, from the simplest control switch to the main processor.

Quick setup and simple installation QuickStart’s auto-learn feature and optional front panel programming make setup easy, and last minute changes a snap.

Signature Series installation benefits Electronic addressing reduces installation costs by eliminating duplicate addressing and time consuming troubleshooting.

Uses existing wiring Substantially reduces installation time and costs.

Ground fault detection by module Ground faults are isolated and individually displayed by location on the system’s LCD display, saving hours of troubleshooting.

Remote annunciation & control Supports up to eight remote annunciators, which provide mirrored annunciation of front panel messages and status indicators.

Service above all

Combine QuickStart & Genesis

As Canada’s leading Life Safety Service provider, we are pleased to offer 24 hour Service from our factory-trained technicians located in 53 offices nationwide.

Low-profile horns and strobes, which offer independent horn control over a single pair of wires – another costsaving feature from EST.

89005-0001 Issue 2