Clad Epicr Out-Swing Patio Doors Custom Wood TABLE OF CONTENTS

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-2

Quick Spec Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-3

Elevations/Sizes: 1/8” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-5

1-Panel Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-7

2-Panel Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-8

Glazing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-9

Trim Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-12

Rail, Panel & Sill Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-13

Mullion Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-16

Grille & SDL Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-17

Unit Sizing, Rough Openings & Masonry Openings . . . . . . . . . . . . . . . . . . . . . . .

26-18

Section Details: 3” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26-19

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-1

Clad Epicr Out-Swing Patio Doors Custom Wood PRODUCT SPECIFICATIONS EXTERIOR FINISH

WEATHER-STRIPPING

Exterior aluminum surfaces are finished with a fluoropolymer (70% Kynar 500R) multi-coat finish system to meet the performance standards required by AAMA specification #2605. 41 standard colors include Brilliant White, Chestnut Bronze, Desert Sand, French Vanilla, Hartford Green, Mesa Red, Black Licorice, Heirloom White, Hunter Green, Redwood, Sage Brown, Smoke, and more. Three copper finishes are available on door panels.

Engineered system with dual foam filled bulb seal compressed between the exterior of the panel and the frame in a continuous plane on all four sides. A Pemko two-piece adjustable astragal is applied to each panel on double door applications.

AURALASTR WOOD AuraLastR wood is fundamentally different from wood treated in traditional millwork preservation processes in that it uses a proprietary vacuum/pressure process to provide protection throughout the wood parts used to make windows and doors. AuraLastR wood is distinguished from wood using traditional preservation methods by its unique ability to achieve greater penetration of the active ingredients into the wood parts, with a minimum treatment penetration of 92%.

INTERIOR FINISH All interior surfaces are unfinished clear pine ready for on-site finishing. Optional interior wood species include vertial grain Douglas Fir, Mahogany and Knotty Alder. Primed interior also available.

FRAME Frame is assembled from select kiln-dried pine AuraLastR wood on all exterior parts. Exterior surface is covered with .050 gauge extruded aluminum cladding. Standard jamb width is 4-9/16”.

PANELS 1-23/32” thick select kiln-dried pine AuraLastR wood. Exterior surface is covered with .024 gauge roll formed aluminum cladding. The top and bottom rails are formed from solid Western Pine veneers laminated to a kiln dried edge-and-end-glued core, while the stiles have the same veneer laminated to a Timberstrand core. The standard layout is 6-5/8” top rail and stiles, and a 10-1/4” bottom rail.

GLAZING Insulating glass is constructed from two panes of tempered glass, utilizing a continuous roll formed stainless steel spacer with dual seal sealant. A computer-controlled application of clear silicone is used to bed the exterior of the insulating glass into the panel. An acrylic sealant is used to bed the interior. All insulating glass units comply with the performance requirements of IGCC in accordance with either ASTM E774 or E2190.

GLAZING OPTIONS - TEMPERED Tempered insulating glass available in Low-E with Argon, Low-E, Low-E 366, Clear, Neat Glass, Seedy Reamy, tinted, reflective, or obscure, or other specialty glass as specified. Preserve® film is a 0.003” thick polyethylene film with a low tack acrylic adhesive applied to the glass for protection during shipping and installation. Installations at 4,000 foot elevations and higher require a capillary tube to equalize environmental stress (otherwise known as High Altitude glazing). High altitude glazing does not allow the use of Argon as listed under glazing options.

Architectural Detail Manual December 2011

SILL The sill is a dark bronze anodized aluminum, 1/2” high to meet the standards set forth by the ADA for handicap access. A door shoe/kick plate with an integral sweep is applied to the panel.

HARDWARE The door panels are mounted into the frame utilizing steel based ball bearing hinges in Brushed Chrome, Polished Brass or Oil-Rubbed Bronze. The door panels are not bored for handle sets.

GRILLES SDL (Simulated Divided Lites) - extruded aluminum muntins permanently applied to the exterior of the insulating glass unit (not available on textured glass) in 5/8”, 7/8”, 1-1/8”, or 1-3/8” widths. Profiles are bead stop in all widths, and a putty profile in 5/8”, 7/8”, and 1-1/8” widths only. 1” Copper SDL is also available. SDL is standard with a light bronze internal shadow bar to give a true divided lite appearance. As an option, SDL may be ordered with a silver shadow bar. Clear wood interior muntin bars match the exterior muntin width and are permanently bonded to the interior of the glass. Also available is a 2-5/16” SDL bar, which simulates a double-hung checkrail. Full-Surround Removable Wood Grilles - Rectangular, unfinished interior clear pine wood grilles in 7/8”, 1-1/8”, and 1-3/8” are available in patterns selected by the owner. GBG (Grilles between the Glass) - 5/8” flat, 23/32” contour, or 1” contour grilles mounted between the glass panes suspended within the air cavity.

EXTERIOR TRIM Nail flange and drip cap standard with optional extruded aluminum brickmould, 3-1/2” flat, 3-1/2” Adams and Heritage trims. Optional mull covers to accommodate 1” (spread only), 2”, 3-1/2” and 6” spread and stud pocket mull.

EXTENSION JAMBS Extension jambs are available for wall depths up to 6-11/16”.

INSTALLATION Installation per JELD-WEN Installation Method for Metal Clad Patio Doors. See www.jeld-wen.com/resources for instructions. See www.jeld-wen.com information.

for

JELD-WEN reserves the right to change specifications without notice.

architectural

and

performance

Page 26-2

Clad Epicr Out-Swing Patio Doors Custom Wood QUICK SPEC GUIDE SPECIFICATION EXTERIOR FINISH

STANDARD FEATURES

S S S S S S S S S S S S S S

S S S S S S S EXTERIOR TRIM

Brilliant White Chestnut Bronze Desert Sand French Vanilla Mesa Red Hartford Green Black Licorice Heirloom White Hunter Green Redwood Sage Brown Smoke Artic Silver Dark Chocolate Black Emerald Bone White Bronze Buckskin Cambridge White Capri Blue Cascade

S S S S S S S S S S S S S S S S S S S S

Champagne Clover Mist Dark Buckskin Dark Ivy Deep Summer Garnet Haverstraw Hudson Blue Ivory Ivy Liberty Blue Mocha Cream Mosiac Green Pueblo Tan Rosewood Scarlet Haze Sea Foam Teal Wedgewood White

S Drip Cap & Integral Nailing Fin

OPTIONAL FEATURES Some options may require additional lead times. Consult your JELD-WEN Sales Representative.

S Custom Color Matching

Panel Only: S Bright Copper S Speckled Patina Copper S Hand Rubbed Patina Copper

S Extruded Aluminum Brickmould S Adams Casing

INTERIOR WOOD

S Western Pine

S Knotty Alder S Vertical Grain Douglas Fir S Mahogany

INTERIOR FINISH

S Natural

S Priming Available

S 3-1/2” Flat Casing S Heritage Casing S Folding Nailing Fin

Pre-finished Interior Options are:

S Paint - Pure White, Extra White, Natural Choice, Moderate White

S Stain - Wheat, Fruitwood, Cherry, Cordovan, Cider S Clear Lacquer SIZE

S Width: 3-0, 3-6, 3-8, 6-0, 7-0 S Height: 6-8, 7-0, 8-0, 9-0

S Any Width: 36 to 44 S Any Height: 80 to 108

GLAZING (ALL TEMPERED)

S Low-E Tempered Insulating Glass (with Argon) S Low-E 366 S Preserve® Protective Film

S Clear S Obscure S Tints: Bronze, Gray, Green

S Reflective S Glue Chip S Safety Laminate in

S S S S S S S

Neat Glass Seedy Reamy Rain Narrow Reed Sandblasted Tempered Impact Resistant

Clear, Bronze or Gray

S High Altitude (Breather Tube, no Argon)

Continued on next page

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-3

Clad Epicr Out-Swing Patio Doors Custom Wood QUICK SPEC GUIDE SPECIFICATION

STANDARD FEATURES

GRILLES

OPTIONAL FEATURES Some options may require additional lead times. Consult your JELD-WEN Sales Representative. SDL Bead Profile: S 5/8”, 7/8”, 1-1/8”, 1-3/8”, 2-5/16” with Light Bronze Shadow Bar S 5/8”, 7/8”, 1-1/8”, 1-3/8”, 2-5/16” with Silver Shadow Bar SDL Putty Profile:

S 5/8”, 7/8” and 1-1/8” with Light Bronze Shadow Bar

S 5/8”, 7/8” and 1-1/8” with Silver Shadow Bar S 1” Copper SDL GBG (Grilles between the Glass):

S 5/8” Flat, 23/32” Contour, 1” Contour Full-Surround:

S 7/8”, 1-1/8”, 1-3/8” HARDWARE

S Ball Bearing Hinges S No Handle Set, No Bore

HINGE COLOR

S Brushed Chrome

S Polished Brass S Oil-Rubbed Bronze

JAMB

S Applied, 5/4 S 4-9/16” S Handicapped Sill

S Up to 6-11/16” S No Sill

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-4

Clad Epicr Out-Swing Patio Doors Custom Wood GENERAL INFORMATION

DIMENSIONAL DOORS Clad Epic out-swing doors may be specified as ”dimensional” by adjusting the desired rough opening width or height in 1/4” increments from standard. Clad Epic out-swing doors are available in single & twin styles. The standard size range includes sizes specifically designed for replacement of older door models in existing structures, as well as a full range of ”true size” products for architectural consistency. ACTIVE

ACTIVE

OPERATION Clad Epic out-swing doors are available in single & twin operating styles. Single panel doors may be specified as stationary (non-venting) or can operate left or right. Two-panel doors feature two operating panels, both of which are active. Configuration and handing is based on viewing the door from the exterior.

MULTIPLE ASSEMBLIES Clad Epic out-swing doors may be mulled below, or beside other clad door and clad window products. Factory assembled mulls are limited in height (100”), width (150”), and a total area (75 square feet).

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-5

Clad Epicr Out-Swing Patio Doors Custom Wood ELEVATION NOTES

ELEVATION DRAWINGS UTILIZE A LIMITED NUMBER OF PROJECTED LINES TO PRODUCE A RUDIMENTARY DRAWING INTENDED TO BE USED IN A SMALL GRAPHICAL SCALE. ELEVATIONS ARE VIEWED PERPENDICULAR FROM THE EXTERIOR OF THE STRUCTURE. IF MORE DIMENSIONS ARE NEEDED, USE THE SECTION DRAWINGS FOR MORE COMPLETE DEPICTIONS.

M.O. Brickmould M.O. Adams/Flat Casing Rough Opening Frame Size Daylight Opening

41 1/4” [ 1048 ] 44 5/16” [ 1126 ] 38 3/4” [ 384 ] 38” [ 965 ] 22 5/8” [ 575 ]

Masonry Openings for Brickmould, Flat & Adams Casing. (Subtract 1/2” from Masonry Opening for Unit Size)

83 15/16” [ 2132 ] 85 15/32” [ 2171 ] 82 13/16” [ 2103 ] 82 1/16” [ 2084 ] 62 5/16” [ 1583 ]

OUTSIDE OF FRAME

DAYLIGHT OPENING

’COSWTC’ INDICATES CLAD EPIC OUT-SWING DOOR ’COFRTC’ INDICATES CLAD EPIC OUT-SWING FRENCH DOOR

COSWTC3068

’T’ INDICATES ’TRUE SIZE’ ’C’ INDICATES ’COMMERCIAL DOOR’

BOOK CODE THE LAST TWO NUMBERS INDICATE THE UNIT HEIGHT THE FIRST TWO NUMBERS INDICATE THE UNIT WIDTH

GENERAL SWINGING DOOR NOTES

1. CLAD EPIC OUT-SWING DOOR (COSWTC) UNITS ARE AVAILABLE AS OPERATING OR STATIONARY UNITS. 2. UNIT ELEVATIONS ARE SHOWN WITHOUT EXTERIOR TRIM. UNIT SIZES & MASONRY OPENING DIMENSIONS WILL CHANGE WITH THE ADDITION OF EXTERIOR TRIM. SEE THE ’UNIT SIZING, ROUGH OPENINGS & MASONRY OPENINGS’ PAGE FOR EXTERIOR TRIM EFFECTS. 3. OPERATING UNITS ARE AVAILABLE AS LEFT OR RIGHT HAND OPERATION. 4. HANDICAP SILL AND 10 1/4” BOTTOM RAILS ARE STANDARD ON ALL UNITS. 5. INTERMEDIATE LOCK RAILS & RAISED PANELS ARE AVAILABLE FOR ALL UNITS.

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-6

Clad Epicr Out-Swing Patio Doors Custom Wood 1-PANEL UNITS

41 1/4” [1048] 44 5/16” [1126] 38 3/4” [984] 38” [965] 22 5/8” [575]

47 1/4” [1200] 50 5/16” [1278] 44 3/4” [1136] 44” [1118] 28 5/8” [727]

49 1/4” [1251] 52 5/16” [1329] 46 3/4” [1181] 46” [1168] 30 5/8” [779]

COSWTC3068

COSWTC3668

COSWTC3868

COSWTC3070

COSWTC3670

COSWTC3870

COSWTC3080

COSWTC3680

COSWTC3880

COSWTC3090

COSWTC3690

COSWTC3890

111 15/16” [2843] 113 15/32” [2882] 111 5/16” [2829] 110 9/16” [2808] 90 5/16” [2294]

99 15/16” [2538] 101 15/32” [2577] 99 5/16” [2523] 98 9/16” [2503] 78 5/16” [1989]

87 15/16” 89 15/32” 87 5/16” 86 9/16” 66 5/16”

[2234] [2273] [2218] [2199] [1684]

83 15/16” [2132] 85 15/32” [2171] 83 5/16” [2116] 82 9/16” [2079] 62 5/16” [1582]

M.O. BRICKMOULD M.O. ADAMS/FLAT CASING ROUGH OPENING FRAME SIZE DAYLIGHT OPENING

ELEVATION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN [] ARE IN MILLIMETER CONVERSIONS.

Note: Elevations shown DO NOT have exterior trim. Subtract 1/2” (12.7) from M.O. (Masonry Opening) for Unit Size. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.

SCALE: 1/8” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-7

Clad Epicr Out-Swing Patio Doors Custom Wood 2-PANEL UNITS 77 9/16” [1970] 80 5/8” [2048] 75 1/16” [1906] 74 5/16” [1888] 22 5/8” [575]

89 9/16” [2275] 92 5/8” [2353] 87 1/16” [2211] 86 5/16” [2192] 28 5/8” [727]

COFRTC6068

COFRTC7068

COFRTC6070

COFRTC7070

COFRTC6080

COFRTC7080

COFRTC6090

COFRTC7090

111 15/16” [2843] 113 15/32” [2882] 111 5/16” [2829] 110 9/16” [2808] 90 5/16” [2294]

99 15/16” [2538] 101 15/32” [2577] 99 5/16” [2523] 98 9/16” [2503] 78 5/16” [1989]

87 15/16” [2234] 89 15/32” [2273] 87 5/16” [2218] 86 9/16” [2199] 66 5/16” [1684]

83 15/16” [2132] 85 15/32” [2171] 83 5/16” [2116] 82 9/16” [2097] 62 5/16” [1582]

M.O. BRICKMOULD M.O. ADAMS/FLAT CASING ROUGH OPENING FRAME SIZE DAYLIGHT OPENING

ELEVATION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN [] ARE IN MILLIMETER CONVERSIONS.

Note: Elevations shown DO NOT have exterior trim. Subtract 1/2” (12.7) from M.O. (Masonry Opening) for Unit Size. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.

SCALE: 1/8” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-8

Clad Epicr Out-Swing Patio Doors Custom Wood GLAZING OPTIONS INTERIOR GLAZED INSULATED 3/4” [19] GLASS 1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

1 23/32” [44]

6 5/8” [168]

11/32” [8]

5/8” GRILLE BAR

1 1/8” [29]

11/32” [8]

7/8” GRILLE BAR

1/4” [6]

11/32” [8]

1/4” [6]

6 5/8” [168]

11/32” [8]

1 1/8” SDL BAR (PUTTY/BEAD) 1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

1/4” [6]

5/8” SDL BAR (PUTTY/PUTTY)

1/4” [6] 7/8” [22]

5/8” [16]

6 5/8” [168]

1 1/8” [29]

7/8” SDL BAR (PUTTY/PUTTY)

1 23/32” [44]

1 1/8” SDL BAR (PUTTY/PUTTY) 1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

11/32” [8] 1/4” [6]

11/32” [8]

1/4” [6] 5/8” [16]

11/32” [8]

1/4” [6]

7/8” [22]

1 1/8” [29]

5/8” SDL BAR (BEAD STOP)

7/8” SDL BAR (BEAD STOP)

1 1/8” SDL BAR (BEAD STOP)

1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

11/32” [8] 1 3/8” [35]

1 3/8” SDL BAR (BEAD STOP) Architectural Detail Manual November 2013

1 1/8” [29]

6 5/8” [168]

1/4” [6]

11/32” [8]

1/4” [6]

7/8” [22]

1 23/32” [44]

1/4” [6]

1 23/32” [44]

7/8” SDL BAR (PUTTY/BEAD)

6 5/8” [168]

1 3/8” GRILLE BAR

1 23/32” [44]

5/8” [16]

5/8” SDL BAR (PUTTY/BEAD)

11/32” [8]

1 1/8” GRILLE BAR

6 5/8” [168]

7 1/16” [179]

1 3/8” [35]

5/16” [8]

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

7 1/16” [179]

7/8” [22]

5/8” [16]

1 23/32” [44]

3/16” [5] 5/8” [16]

5/16” [8]

7/32” [6] 23/32” [18]

5/8” 23/32” FLAT GBG CONTOUR GBG

31/32” [25]

1” CONTOUR GBG

JELD-WEN reserves the right to change specifications without notice.

SCALE: NTS Page 26-9

Clad Epicr Out-Swing Patio Doors Custom Wood GLAZING OPTIONS INTERIOR GLAZED SINGLE 1/8” [3] GLASS 1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

5/8” [16]

1 23/32” [44]

6 5/8” [168]

11/32” [8]

11/32” [8]

7/8” GRILLE BAR

6 5/8” [168]

11/32” [8]

6 5/8” [168]

1 23/32” [44]

6 5/8” [168]

1/4” [6]

1/4” [6] 5/8” [16]

1 1/8” [29]

7/8” [22]

5/8” SDL BAR (PUTTY/PUTTY)

7/8” SDL BAR (PUTTY/PUTTY)

1 23/32” [44]

1 1/8” SDL BAR (PUTTY/PUTTY)

1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

11/32” [8] 1/4” [6]

Architectural Detail Manual November 2013

1 1/8” SDL BAR (PUTTY/BEAD)

1 23/32” [44]

1/4” [6]

7/8” [22]

1 1/8” [29]

7/8” SDL BAR (PUTTY/BEAD)

1 23/32” [44]

1/4” [6]

11/32” [8] 1/4” [6]

7/8” [22]

5/8” SDL BAR (PUTTY/BEAD)

11/32” [8]

1 23/32” [44]

11/32” [8]

5/8” [16]

6 5/8” [168]

1 3/8” GRILLE BAR

6 5/8” [168]

1/4” [6]

6 5/8” [168]

11/32” [8]

11/32” [8]

1 23/32” [44]

1/4” [6]

21/32” [17]

5/8” SDL BAR (BEAD STOP)

7 1/16” [179]

1 3/8” [35]

1 1/8” GRILLE BAR

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

1 1/8” [29]

7/8” [22]

5/8” GRILLE BAR

7/8” SDL BAR (BEAD STOP)

7 1/16” [179]

1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

11/32” [8]

11/32” [8] 1/4” [6]

1/4” [6] 1 1/8” [29]

1 1/8” SDL BAR (BEAD STOP)

JELD-WEN reserves the right to change specifications without notice.

1 3/8” [35]

1 3/8” SDL BAR (BEAD STOP)

SCALE: NTS Page 26-10

Clad Epicr Out-Swing Patio Doors Custom Wood GLAZING OPTIONS INTERIOR GLAZED IMPACT RESISTANT GLASS 1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

1 23/32” [44]

6 5/8” [168]

7 1/16” [179]

11/32” [8]

1 23/32” [44]

6 5/8” [168]

7/8” GRILLE BAR

11/32” [8]

6 5/8” [168]

Architectural Detail Manual November 2013

1 1/8” [29]

7/8” SDL BAR (PUTTY/PUTTY)

1 1/8” SDL BAR (PUTTY/PUTTY) 1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

7/8” SDL BAR (BEAD STOP)

1/4” [6] 7/8” [22]

1 23/32” [44]

1/4” [6]

1 23/32” [44]

6 5/8” [168]

1/4” [6]

5/8” SDL BAR (PUTTY/PUTTY)

7/8” [22]

1 1/8” SDL BAR (PUTTY/BEAD)

1 23/32” [44]

5/8” [16]

11/32” [8]

1 1/8” [29]

7/8” SDL BAR (PUTTY/BEAD)

1 23/32” [44]

1/4” [6]

1/4” [6]

7/8” [22]

5/8” SDL BAR (PUTTY/BEAD)

6 5/8” [168]

11/32” [8]

11/32” [8]

5/8” [16]

1 23/32” [44]

6 5/8” [168]

1/4” [6]

1/4” [6]

1 3/8” GRILLE BAR

1 23/32” [44]

6 5/8” [168]

6 5/8” [168]

1 3/8” [35]

1 1/8” GRILLE BAR

1 23/32” [44]

1/4” [6]

11/32” [8] 5/8” [16]

5/8” SDL BAR (BEAD STOP)

7 1/16” [179]

11/32” [8]

1 1/8” [29]

7/8” [22]

6 5/8” [168]

6 5/8” [168]

11/32” [8]

11/32” [8]

5/8” [16]

5/8” GRILLE BAR

7 1/16” [179]

1 23/32” [44]

1 23/32” [44]

6 5/8” [168]

11/32” [8] 1/4” [6]

11/32” [8] 1/4” [6]

1 1/8” [29]

1 1/8” SDL BAR (BEAD STOP)

JELD-WEN reserves the right to change specifications without notice.

1 3/8” [35]

1 3/8” SDL BAR (BEAD STOP)

SCALE: NTS Page 26-11

Clad Epicr Out-Swing Patio Doors Custom Wood TRIM OPTIONS EXTERIOR TRIM

3 23/32” [94] 2 29/32” [74]

2 29/32” [74]

1 3/8” [35]

MANCHESTER CASING

ADAMS CASING

3 1/2” FLAT CASING

BRICKMOULD

NAILING FIN OPTIONS

9/16” FOLDING NAILING FIN

11/16” FOLDING NAILING FIN

4 9/16” [116]

4 11/16” [119]

1 3/16” [30]

1 1/16” [27]

RIGID NAILING FIN 4 9/16” [116]

1 3/16” [30] NOTE: 11/16” FOLDING NAILING FLANGE WILL BE USED ON SIDE JAMBS AND WITH ALL STANDARD TRIM OPTIONS. ON UNITS WITH 11/16” FOLDING NAILING FLANGE AND NO EXTERIOR TRIM. THE 11/16” DRIPCAP IS USED.

SCALE: 3” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-12

Clad Epicr Out-Swing Patio Doors Custom Wood RAIL, PANEL & SILL OPTIONS

6 9/16” [167]

2” [51]

1 1/32” [26] OPTIONAL INTERMEDIATE

4 5/8” [117]

LOCK RAIL 2” OPTIONAL JAMB EXTENDER 6 5/8” [169]

3/4” [19]

3/4” [19]

1/8” [3]

1/8” [3]

1 23/32” [44]

1 23/32” [44]

10 1/4” [260]

10 1/4” [260]

1/2” [13]

1/2” [13] 1” [25]

8” [203]

1” [25]

10” [254]

STANDARD 10 1/4” BOTTOM RAIL HANDICAP SILL (4 9/16 JAMB)

STANDARD 10 1/4” BOTTOM RAIL HANDICAP SILL (6 9/16 JAMB)

SCALE: 3” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-13

Clad Epicr Out-Swing Patio Doors Custom Wood RAIL, PANEL & SILL OPTIONS

STANDARD RAISED PANEL OPTIONS

1 23/32” [44] OPTIONAL INTERMEDIATE LOCK RAIL CL

6 3/32” [155]

3 9/16” [90]

1” [25] 1 3/8” [35] 1” [25] 1 3/8” [35] 10 1/16” RAISED PANEL WIDTH

1 3/16” [30]

36” STD LOCK 23 3/4” STD

RAIL HEIGHT 1/16” [2]

1” [25]

RAISED PANEL HEIGHT

OPTIONAL 7/8” PUTTY STOP

35 7/8” (3-0T) DOOR PANEL

OPTIONAL INTEMEDIATE

1” [25]

SDL BAR

STILE (RAISED PANELS)

3 9/16” [90]

WIDTH

1 23/32” [44]

1 3/16” [30]

OPTIONAL STANDARD 10 1/4”

7/8” PUTTY STOP

BOTTOM RAIL

SDL BAR

1/16” [2]

10 1/16” RAISED PANEL WIDTH

9 23/32” [247]

3/4” [19] 6 3/32” [155] BOTTOM OF PANEL

VERTICAL SECTION

HORIZONTAL SECTION

SCALE: 3” = 1’ Architectural Detail Manual December March 20092011

JELD-WEN reserves the right to change specifications without notice.

Page 26-14

Clad Epicr Out-Swing Patio Doors Custom Wood RAIL, PANEL & SILL OPTIONS OPTIONAL RAISED PANEL OPTIONS

1 23/32” [44]

OPTIONAL INTERMEDIATE

6 3/32” [155]

LOCK RAIL CL

3 9/16” [90]

1” [25]

1” [25]

1 3/8” [35] 1 3/8” [35]

23 11/16” RAISED PANEL WIDTH 1 3/16” [30]

1 3/16” [30]

10 11/16” RAISED PANEL HEIGHT

1/16” [2]

35 7/8” (3-0T) DOOR PANEL

1/16” [2]

WIDTH

22 15/16” LOCK RAIL HEIGHT OPTIONAL 7/8” PUTTY STOP OPTIONAL 7/8” PUTTY STOP SDL BAR

1” [25]

SDL BAR 1” [25]

1 23/32” [44]

6 3/32” [155]

9 23/32” [247]

STANDARD 10 1/4” BOTTOM RAIL

HORIZONTAL SECTION

3/4” [19]

BOTTOM OF PANEL

VERTICAL SECTION

SCALE: 3” = 1’ Architectural Detail Manual December March 20092011

JELD-WEN reserves the right to change specifications without notice.

Page 26-15

Clad Epicr Out-Swing Patio Doors Custom Wood STANDARD MULLION DETAILS

4 9/16” JAMB 2 7/8” [73]

1 9/32” [32]

SIDE JAMB

6 9/16” JAMB

2 7/8” [73]

1 9/32” [32]

SIDE JAMB

SCALE: 3” = 1’ Architectural Detail Manual December March 20112011

JELD-WEN reserves the right to change specifications without notice.

Page 26-16

Clad Epicr Out-Swing Patio Doors Custom Wood LITE CUT INFORMATION

Clad Epic out-swing doors are available with removable grilles in 5/8”, 7/8”, 1-1/8”, and 1-3/8” widths with GBG (Grilles between the Glass), or with Simulated Divided Lites. Standard lite cuts are rectangular.

LITE CUT OPTIONS Special lite cut patterns can include a wide variety of straight line and radius patterns. The illustrations shown here represent just a few of the possibilities. Rectangular, horizontal, vertical and Prairie lite patterns are available in all standard size clad Epic swinging doors. Uneven, diamond, radius and Gothic lite cuts are available, subject to approval. Approvals are based on the ability to fulfill the design requirements while maintaining the construction integrity of the finished product.

RECTANGULAR

HORIZONTAL

VERTICAL

PRAIRIE

UNEVEN

DIAMOND

RADIUS

GOTHIC

BAR ALIGNMENT Alignment of divided lite muntin bars from one product to the next is often required by fine architectural design. Wood grilles, GBG (Grilles between the Glass), or Simulated Divided Lites may be specified with muntin bars aligned.

Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-17

Clad Epicr Out-Swing Patio Doors Custom Wood UNIT SIZING, ROUGH OPENINGS & MASONRY OPENINGS GENERAL NOTES:

STANDARD OFFERING DRIP CAP & NAILING FLANGE

UNITS WITH NO EXTERIOR TRIM OR DRIP CAP & NAILING FLANGE: FRAME SIZE = UNIT SIZE

HORIZONTAL FRAME = UNIT SIZE

UNIT SIZE IS ALWAYS THE EXTREME SIZE OF THE DOOR WITH OR WITHOUT TRIM (DRIP CAP & NAILING FLANGE ARE NOT ADDED TO ANY UNIT SIZING)

STATIONARY

OPERATOR ROUGH OPENING IS ALWAYS 3/4” OVER FRAME SIZE OF THE DOOR MASONRY OPENING IS ALWAYS 1/2” OVER THE UNIT SIZE OF THE DOOR

ROUGH OPENING:

VERTICAL FRAME = UNIT SIZE

STATIONARY

OPERATOR

DRIP CAP & NAILING FLANGE

HORIZONTAL ROUGH OPENING

3/8” [10]

3/8” [10]

STATIONARY

3 23/32” [95] 2 29/32” [74] 1 3/8” [35]

3/4” [19]

UNIT SIZE

1 3/8” [35]

2 29/32” [74]

3 23/32” [94]

Architectural Detail Manual December 2011

HORIZONTAL UNIT SIZE BRICKMOULD FRAME + 2 3/4” [70]

VERTICAL ROUGH OPENING

HORIZONTAL UNIT SIZE 3 1/2” FLAT CASING & ADAMS CASING FRAME + 5 13/16” [148]

VERTICAL UNIT SIZE MANCHESTER CASING FRAME + 3 23/32” [94]

VERTICAL UNIT SIZE BRICKMOULD FRAME + 1 3/8” [35]

HORIZONTAL UNIT SIZE MANCHESTER CASING FRAME + 7 7/16” [189]

VERTICAL UNIT SIZE 3 1/2” FLAT CASING & ADAMS CASING FRAME + 2 29/32” [74]

FRAME TO EXTERIOR TRIM (UNIT SIZE)

1 3/8” [35]

2 29/32” [74]

3 23/32” [95]

JELD-WEN reserves the right to change specifications without notice.

Page 26-18

Clad Epicr Out-Swing Patio Doors Custom Wood 1-PANEL UNIT

5 3/4”

1 1/8”

4 9/16”

2 1/2”

3/4”

6 1/8”

Frame Size

Rough Opening

Glass Size

Daylight Opening

Unit Size

Panel Size

9/16”

9/16”

9 3/4”

1 3/4”

8”

VERTICAL SECTION

SCALE: 3” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-19

Clad Epicr Out-Swing Patio Doors Custom Wood 1-PANEL UNIT

Rough Opening 3/8”

3/8”

Frame Size

4 9/16”

4 9/16” 5 3/4”

5 3/4”

1 1/8”

9/16” Daylight Opening 6 1/8”

2 9/16”

1 1/8”

9/16”

Glass Size

6 1/8”

Panel Size

2 9/16”

Unit Size

HORIZONTAL SECTION

SCALE: 3” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-20

Clad Epicr Out-Swing Patio Doors Custom Wood 2-PANEL FRENCH UNIT

Rough Opening 3/8”

Frame Size

4 9/16” 5 3/4”

9/16”

9/16”

1 1/8” Daylight Opening 6 1/8” 2 9/16”

Glass Size

6 1/8”

Panel Size Unit Size

HORIZONTAL SECTION

SCALE: 3” = 1’ Architectural Detail Manual December 2011

JELD-WEN reserves the right to change specifications without notice.

Page 26-21