CITY OF LEE S SUMMIT PUBLIC WORKS DEPARTMENT TRAFFIC ENGINEERING

CITY OF LEE’S SUMMIT PUBLIC WORKS DEPARTMENT TRAFFIC ENGINEERING APPROVED MATERIALS LIST FOR STREET LIGHTING This document is provided as a benefit to...
Author: Harold Stewart
0 downloads 0 Views 29KB Size
CITY OF LEE’S SUMMIT PUBLIC WORKS DEPARTMENT TRAFFIC ENGINEERING APPROVED MATERIALS LIST FOR STREET LIGHTING This document is provided as a benefit to contractors and suppliers who are performing work in the City of Lee’s Summit. All products identified on this list will be approved for installation on City street lighting projects. This list shall not be used as a substitute for catalog cuts or material approval. This list is updated periodically. The models indicated on the list are approved, but are subject to final field inspection before acceptance. The department may test new products and equipment for street lighting. These new products may be installed on a street lighting project or purchased on parts orders. Vendors may also submit items, at no cost to the City, for evaluation. Only a limited number of units will be accepted for evaluation until an item is added to the Approved Materials List. A vendor wishing to introduce a new product shall contact the City Traffic Engineer. Minor model changes do not require an evaluation, although the vendor shall submit specification sheets and a sample of the product for the City to inspect. All equipment evaluations are coordinated through the City Traffic Engineer. The vendor supplying the equipment shall provide equipment specifications and a certification that the equipment meets and or exceeds City specifications before any testing is performed. The equipment may be tested for a period up to one-year, unless otherwise specified on the Approved Materials List. Products that are not performing satisfactorily will be replaced with an approved product if the vendor cannot provide timely correction of the problem or if unsatisfactory operation of the intersection results. In lieu of a testing period the vendor may supply proof of successful testing at other locations within the Kansas City metropolitan area. If a vendor is proposing a product that does not meet City specifications, an explanation of why the product meets or exceeds the current specifications must be provided by the vendor in writing to the City Traffic Engineer. If approved, the product may be tested for the specified period as described above. If the product is satisfactory, the City will consider a revision to the applicable specifications. Products will not be added to the Approved Materials List that do not meet City specifications. Products not performing as required or not supported by vendors or manufacturers are subject to removal form the Approved Materials List. Grounds for removal of products may include, but are not limited to:     

Significant change in product specifications or design without notification to the City, Failure to correct or replace products that are defective in manufacturing or workmanship, Repeated patterns of malfunction of a product not adequately corrected by vendor, Unreasonable pricing or timing of repair parts or repair work, Excessive delivery times for purchases.

Changes in standard specifications may also necessitate removal of specific products from the Approved Materials List. If this occurs, there will be a grace period where the product will be retained on the list after the specifications are changed and the product will be removed if it is not revised to meet the new criteria.

December 21, 2009

1

STREET LIGHTING EQUIPMENT BASES TYPE B14 SCREW-IN ANCHORS MODEL JH Botts ............................................................................... Drawing No. JHBOPK-1, Type P TYPE B40S SCREW-IN ANCHORS MODEL AB Chance .................................................................................................... T112-0293 0101 JH Botts ............................................................................. Drawing No. JHBOPK-1, Type F1 TYPE B40D SCREW-IN ANCHORS MODEL AB Chance ..................................................................................................... T112-02940101 JH Botts ............................................................................. Drawing No. JHBOPK-1, Type F2 STREET LIGHT POLES TYPE P40S MODEL Hapco ............................................................................................................. B12927 40 MH Valmont ............................................................................. Drawing No. DR7010; Type P40S TYPE P40D MODEL Hapco ............................................................................................................. B12928 40 MH Valmont ............................................................................. Drawing No. DR7010; Type P40D BREAK-AWAY BASES MODEL Akron Foundry 11” ..................................................................... TB6-9” Drawing No. A79402 Akron Foundry 15” ..................................................................... TB5-9” Drawing No. A79236 Valmont 11” .................................................................................................... 08R115125P09 Valmont 15” .................................................................................................... 10R145153B09 LUMINAIRES 150 WATT COBRA-HEAD LUMINAIRES MODEL General Electric (GE) ........................................................................... M2AC15S0A1GMC31 150 WATT POST-TOP LUMINAIRES MODEL Cooper Lighting ........................................................................................... MPB15SW433U2 175 WATT WALLMOUNT LUMINAIRES MODEL General Electric (GE) .......................................................................... WM7M15S0A1SN4DB 250 WATT COBRA-HEAD LUMINAIRES MODEL American Electric Lighting (AEL) .......................................... 325 25S CA MT2 R3 FG NR OP Cooper Lighting ............................................................................................... OVF25SWV3D General Electric (GE) ......................................................................... MDCA25S0A12FMC31 400 WATT COBRA-HEAD LUMINAIRES MODEL American Electric Lighting (AEL) .......................................... 325 40S CA MT2 R3 FG NR OP Cooper Lighting ............................................................................................... OVF40SWV3D

December 21, 2009

2

General Electric (GE) ......................................................................... MDCA40S0A12FMC31 LAMPS 250 WATT LAMPS MODEL General Electric (GE) ....................................................................................... Lucalox 44047 Radiant.......................................................................................................LU 250/MOG/ENV Sylvania ..................................................................................... Lumalux LU250/ECO-67578 400 WATT LAMPS MODEL General Electric (GE) ....................................................................................... Lucalox 44054 Radiant.......................................................................................................LU 400/MOG/ENV Sylvania ..................................................................................... Lumalux LU400/ECO-67533 CONDUIT 2” HDPE CONDUIT MODEL ARNCO ........................................................................................................ Perma-Guard/UL Carlon ............................................................................................................. A13C6NENNA Dura-Line ...................................................................................... Smooth Solid Wall SDR11 2” PVC CONDUIT MODEL Cantex......................................................................................................................A52CA12 Carlon ........................................................................................................................... 49011 2” PVC FITTINGS MODEL Cantex (90° Elbow) ................................................................................................... 5133828 Cantex (Coupling) ..................................................................................................... 6141628 Carlon (90° Elbow) ....................................................................................................... UA9AJ Carlon (Coupling) ..........................................................................................................E940J 2 ½” PVC CONDUIT MODEL Allied .............................................................................................................................. 8110 Cantex......................................................................................................................A52CE12 Carlon ........................................................................................................................... 49012 2 ½” PVC FITTINGS MODEL Cantex (90° Elbow) ................................................................................................... 5133829 Cantex (Coupling) ..................................................................................................... 6141629 Carlon (90° Elbow) ...................................................................................................... UA9FK Carlon (Coupling) ........................................................................................................ E940K HDPE TO PVC COUPLING MODEL Comfit Corp. ...................................................................................................Comfit Coupling ETCO Specialty Products .............................................................................. E-Loc Coupling Tyco Electronics .................................................................................... MOON-Link Coupling 2” GRS Conduit MODEL Wheatland Tube Co. ............................................................................................. RMC-Steel

December 21, 2009

3

CABLE DISTRIBUTION CABLE MODEL Cerrowire ................................................................................................................ 120-4X00 Draka Cableteq USA ...................................................................RHH/RHW-2/USE-2 Copper Service Wire Co. .................................................................................... RHH/RHW-2 Copper Southwire ................................................................................................ CU-RHH/RHW/USE POLE AND BRACKET CABLE MODEL Cerrowire ................................................................................................................. 112-3810 Service Wire Co. ....................................................................................... THHN Copper #10 Southwire ......................................................................................................... CU-THHN #10 GROUND CABLE MODEL Cerrowire ................................................................................................................. 050-2215 Service Wire Co. ................................................................ #6 Bare Solid Soft Drawn Copper Southwire ........................................................................... #6 Bare Solid Soft Drawn Copper PULL AND JUNCTION BOXES TYPE 1 JUNCTION BOXES MODEL Armorcast Products Company (Box & Lid) .................................................. A6001423ATAPC CDR .................................................................................................................. A23-1212-12 New Basis (Box & Lid).................................................................................... PMA121212SN Quazite (Straight Box) ....................................................................................... PC1212BA12 Quazite (Flared Box) .......................................................................................... LX1212BA24 Quazite (Lid) ................................................................................................. PC1212HA0041 TYPE 2 JUNCTION BOXES MODEL Armorcast Products Company (Box & Lid) .................................................... A6001425TAPC CDR .................................................................................................................. A23-1118-12 New Basis (Box & Lid)..................................................................................... PCA111812SN Quazite (Box) .................................................................................................... PG1118BA12 Quazite (Lid) ................................................................................................. PG1118HA0041 CLASS 1 PULL BOXES MODEL Armorcast Products Company (Box & Lid) .............................................. A6001640TAPCX22 CDR .................................................................................................................. A22-1730-22 New Basis (Box & Lid)..................................................................................... PCA173022SN Quazite (Box) .................................................................................................... PG1730BA22 Quazite (Lid) ................................................................................................. PG1730HA0041 POWER SUPPLIES AND COMPONENTS 1-CIRCUIT POWER SUPPLIES MODEL Myers Power Products ................................................................... (without fused contactors) Pacific Utility Products (PUP) .................. USPA-100-100-MODOT (without fused contactors) 4-CIRCUIT POWER SUPPLIES MODEL Millbank ................................................... CP3B51C15AAOLSMO (without fused contactors) Myers Power Products ............................. MEUG16A-M100-LEES (without fused contactors)

December 21, 2009

4

Pacific Utility Products (PUP) ......... USP16-M2100-112C-MODOT (without fused contactors) PHOTOELECTRIC CELLS MODEL American Electric Lighting (AEL) ............................................................... DPR124-2.6-TJBK Area Lighting Research (ALR) ................................................................................. 2190-NP3 Area Lighting Research (ALR) ............................................................................. SST-PV-IES GROUNDING EQUIPMENT GROUND RODS MODEL Erico. ........................................................................................... Copperbonded ground rods Hubbell Power Systems, Inc ...................................................... Copper bonded ground rods Knight. ......................................................................................................... Copperbond rods GROUND ROD CLAMPS MODEL Burndy....................................................................................................................... YGHP-C Burndy............................................................................................................................. GRC Erico ............................................................................................................................... HDC ITT Blackburn .................................................................................................................. JAB MISCELLANEOUS BREAK-AWAY CONNECTORS MODEL Bussman (Fused) ............................................................................................. HEB-JW-RYC Bussman (Non-Fused) ...................................................................................... HET-JW-RYC Littlefuse (Fused) ................................................................................................. LEC-JYC-S Littlefuse (Non-Fused) ........................................................................................... LET-JYC-S FUSES Bussman ......................................................................................................................KTK-8 Ferraz Shawmut .......................................................................................................... ATM-8 Littlefuse ....................................................................................................................... KLK-8 SPLICES MODEL 3M (Resin splice kit) .................................................................................... Scotchcast 90-B1 ITT Blackburn (Split bolt) ............................................................................................... 1HPS

December 21, 2009

5

Suggest Documents