Cisco Products Quick Reference Guide August 2001
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel:408 526-4000 800-553-NETS (6387) Fax: 408 526-4100 You can purchase additional copies of this guide on an as-needed basis or as an annual subscription. To purchase, go to the Cisco Subscription Program Web site http://www.cisco.com/go/subscription or call 800 768-7162 (US) or 925 327-4072 (International). Customer Order Number DOC-785983
General Disclaimer
Although Cisco has attempted to provide accurate information in this Guide, Cisco assumes no responsibility for the accuracy of the information. Cisco may change the programs or products mentioned at any time without prior notice. Mention of non-Cisco products or services is for information purposes only and constitutes neither an endorsement nor a recommendation of such products or services or of any company that develops or sells such products or services. ALL INFORMATION PROVIDED ON THIS WEB SITE IS PROVIDED “AS IS,” WITH ALL FAULTS, AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. CISCO AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT, OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. CISCO AND ITS SUPPLIERS SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR REVENUES, COSTS OF REPLACEMENT GOODS OR SERVICES, LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OF THE GUIDE OR ANY CISCO PRODUCT OR SERVICE, OR DAMAGES RESULTING FROM USE OF OR RELIANCE ON THE INFORMATION PROVIDED, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Many of the Cisco products and services identified in this Guide are provided with written software licenses and limited warranties. Those licenses and warranties provide the purchasers of those products with certain rights. Nothing in this Guide shall be deemed to expand, alter, or modify any warranty or license provided by Cisco with any Cisco product, or to create any new or additional warranties or licenses.
CO N T E N T S
Introduction Cisco Products Quick Reference Guide (CPQRG) i How to Get More Complete Product Information i Cisco Systems Overview iii Service and Support Offerings iv Product Warranty Information v Reseller and Customer Support vi Cisco Capital Financing vii Cisco Powered Network vii Cisco Authorized Refurbished Equipment (US & Canada Only) vii CHAPTER 1
Routers
Routers at a Glance 1-1 Cisco Routers Port Matrix 1-4 Memory Information for Distribution Routers 1-5 Cisco SOHO 70 Series ADSL and G.shdsl Routers 1-7 Cisco 700 Series Router 1-8 Cisco 800 Series Router 1-10 Cisco 1600 Series Router 1-13 Cisco 1700 Series Router 1-15 Cisco 2500 Series Router 1-18 Cisco 2600 Series Router 1-20 Cisco 3600 Series Router 1-25 Cisco 7200 Series Router 1-30 Cisco 7400 Series Internet Router 1-34 Cisco 7500 Series Router 1-37 Cisco 7600 Series Internet Router 1-40 Cisco 10000 Series Internet Router 1-42 Cisco 12000 Series Internet Router 1-44
Cisco SN 5420 Storage Router 1-47 CHAPTER 2
LAN Switching
LAN Switching Products at a Glance 2-1 Cisco LAN and MAN Products Port Matrix 2-4 Cisco Ethernet Switches Overview 2-5 Cisco Catalyst 1900 Series Switches 2-6 Cisco Catalyst 2900 Series Switches 2-8 Cisco Catalyst 2948G-L3 Switches 2-10 Cisco Catalyst 2900 Series XL — Modular Switches 2-12 Cisco Catalyst 2950 Series Switches 2-14 Cisco Catalyst 3500 Series XL Switches 2-16 Cisco Catalyst 3550-12T Series Switches 2-18 Cisco Catalyst 4000 Series Switches— Modular Configuration 2-20 Cisco Catalyst 4000 Series Switches— Fixed Configuration 2-23 Cisco Catalyst 5000 Family 2-25 Cisco Catalyst 6000 Family 2-28 Cisco Catalyst 8500 Multiservice Switch Routers 2-31 Additional LAN Switching Products 2-33 Cisco 1548 Series Micro Switches 10/100 2-33 Cisco Catalyst 2900 Series XL — Fixed Switches 2-33 Cisco Catalyst 3900 Series Switches 2-33 Cisco 1538 Series Micro Hubs 10/100 2-34 Cisco FastHub 400 10/100 Series Hubs 2-34 CHAPTER 3
Wireless LAN Products
Wireless LAN Products at a Glance 3-1 Cisco Aironet 350 Series Client Adapters 3-2 Cisco Aironet 350 Series Access Points 3-4 Cisco Aironet 350 Series Workgroup Bridge 3-6 Cisco Aironet 340 Series Ethernet Bridge 3-8 Cisco Aironet Antennas and Accessories 3-9 CHAPTER 4
IP Telephony, Video, & Web Collaboration 4-1
Campus IP Telephony, Video, & Web Collaboration at a Glance 4-1
Cisco 7900 Series IP Phones 4-4 Cisco CallManager 3.0 and 3.1 4-6 Additional Cisco IP Telephony Applications 4-8 Cisco Survivable Remote Site (SRS) Telephony Software 4-8 Cisco Unity 4-8 Cisco IP IVR/IPAA 4-9 Cisco IP Integrated Contact Distribution 4-9 Cisco Personal Assistant 4-9 Cisco IP SoftPhone 4-9 Cisco MCS 7800 Series Media Convergence Servers 4-11 Cisco Catalyst 4224 Access Gateway Switch 4-13 Cisco ICS 7750 Integrated Communications System 4-14 Cisco IAD 2400 Series Integrated Access Device 4-16 Cisco VG200 Voice Gateway 4-17 Cisco DT-24+ and DT-30+ Digital IP Telephony Gateways 4-17 Cisco IP/VC 3500 Series Videoconferencing Products 4-18 Cisco IP/TV 3400 Series Video Servers 4-19 Cisco Collaboration Server 4-19 CHAPTER 5
VPN and Security Products
VPN and Security Products at a Glance 5-1 Cisco PIX Firewall Series 5-2 Cisco IOS Firewall Feature Set 5-4 Cisco Secure Scanner 5-5 Cisco Secure Policy Manager 5-7 Cisco Secure Intrusion Detection System 5-9 Cisco Secure Access Control Server for Windows 2000 and NT 5-11 Cisco 7100 Series 5-13 Cisco VPN 3000 Family 5-16 Cisco VPN 5000 Series Concentrators 5-19 CHAPTER 6
Content Delivery Network Products
Content Delivery Network Products at a Glance 6-1 Content Networking Overview 6-2 Cisco Content Engine 500 Series 6-3
Cisco Content Engine 7300 Series 6-5 Cisco Content Distribution Manager 4600 Series 6-7 Cisco Content Router 4400 Series 6-9 Cisco CSS 11000 Series Content Services Switches 6-11 Cisco LocalDirector 6-13 Cisco DistributedDirector 6-15 CHAPTER 7
Access Products
Access Products at a Glance 7-1 Remote Dial Access—Data and Voice (VoIP) 7-5 Cisco AS5300 Universal Access Server 7-5 Cisco AS5300/Voice Gateway 7-7 Cisco AS5350 Universal Gateway 7-9 Cisco AS5400 Universal Gateway 7-12 Cisco AS5850 Universal Gateway 7-14 Cisco AS5800 Access Server/Voice Gateway 7-15 Cisco AccessPath—UGS4 Carrier-Class Integrated Universal Gateway 7-16 Remote Dial Access Network Management Products 7-17 SS7 Signaling Products 7-18 Additional Remote Dial Access Products 7-19 Cisco ATA 186—Analog Telephone Adaptor 7-19 Remote Cable Access Solutions Overview 7-20 Cisco uBR7100 Series Universal Broadband Router 7-20 Cisco uBR7200 Series Universal Broadband Router 7-21 Cisco uBR10012 Universal Broadband Router 7-23 Cable Remote Access—Customer Premise Equipment 7-25 Cisco uBR900 Series Cable Access Routers 7-25 Cisco CVA120 Series Cable Voice Adapters 7-25 Cisco 6920 RateMUX Statistical Multiplexer 7-27 Remote Cable Access—Network Management Products 7-28 Digital Subscriber Line (DSL) Access Solutions 7-29 Cisco 6000 Series IP DSL Switches 7-29 DSL Remote Access—Customer Premise Equipment 7-30 Broadband Services Aggregation 7-31
Fixed Broadband Wireless 7-32 Cisco WT-2750 Multipoint Broadband Wireless System 7-32 ATM Multiservice WAN Switching 7-34 Cisco BPX 8600 Series—IP+ATM Multiservice Switches 7-34 Cisco MGX 8850 IP+ATM Multiservice Switch 7-35 Cisco MGX 8200 Series 7-36 Cisco IGX 8400 Series Multiservice WAN Switches 7-37 Long Reach Ethernet 7-38 Cisco Long Reach Ethernet Solution 7-38 Cisco Building Broadband Services Manager (BBSM) 7-40 CHAPTER 8
Optical Transport
Optical Transport Products at a Glance 8-1 Cisco ONS 15454 and 15327 Metro Optical Transport Platforms 8-2 Cisco ONS 15200 Optical Metro DWDM Series 8-3 Cisco Metro 1500 32 Lambda DWDM Platform for Enterprise Networks 8-4 CHAPTER 9
Cisco IOS® Software & Network Management
Cisco IOS Software & Network Management Products at a Glance 9-1 Cisco IOS Software 9-2 ConfigMaker 2.5 9-10 Cisco Network Management Overview 9-11 CiscoWorks2000 Routed WAN Management Solution 9-12 CiscoWorks2000 LAN Management Solution 9-14 CiscoWorks2000 Service Management Solution 9-16 CiscoWorks2000 User Registration Tool (URT) 9-18 CiscoWorks2000 Voice Manager 9-19 CiscoWorks for Windows 9-20 CiscoWorks Blue 9-22 Cisco Netsys SLM Suite 9-23 Cisco Element Management Framework (EMF) 9-24 Cisco Info Center 9-25 Cisco Provisioning Center 9-26 Cisco QoS Policy Manager 9-27
Introduction Cisco Products Quick Reference Guide (CPQRG) CPQRG Background The Cisco Products Quick Reference Guide (CPQRG) is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many of Cisco’s products. The CPQRG is primarily published to support Cisco partners, resellers, sales account teams, and even end-user customers who need a broad, high-level overview of Cisco products, but at that moment do not have access to Cisco’s Web site, the Cisco Connection Online (CCO) at http://www.cisco.com. Note: For the most up to-date and comprehensive information about Cisco products and solutions, please refer to our on-line information or consult a Cisco representative. Because this book is only published twice per year, there are likely to be new products, configurations, and part numbers not included in this edition.
CPQRG Ordering Information Additional printed copies of this book can be purchased on an as-needed basis or through an annual subscription. To order, see http://www.cisco.com/go/subscription (and click on “Subscription Store”) or call 800 768-7162 (USA) or 925 327-4072 (International). Ask for customer order number DOC-785983=. For questions regarding the CPQRG ordering process, please send an email to
[email protected]. For questions, comments, and suggestions on improving the content or structure of CPQRG, please email us at
[email protected].
How to Get More Complete Product Information Cisco Product Catalog For more comprehensive information on all of Cisco’s products, please refer to the Cisco Product Catalog at: http://www.cisco.com/univercd/cc/td/doc/pcat/
Cisco Products Quick Reference Guide (CPQRG)
i
Introduction
Cisco Connection Online (CCO) For even more complete product and solution information, please go to CCO at http://www.cisco.com (and click on “Solutions for Your Network” or “Products and Technology”). In addition to product, technology, and network solutions support, CCO provides a wealth of information including how to find an authorized representative or partner (see “Partners & Resellers” link), how to order products, technical support/customer service, Cisco Corporate news and information, and links to training/events/seminars. CCO provides varying levels of access to information depending on your organization's entitlement. For example, authorized Partners and Resellers can log-in to have greater levels of access to CCO-based pages beyond the public level. Alternately, Guest level CCO access provides a subset of the information available to Partners and Resellers. If you are not a Cisco Partner or Reseller and wish to obtain Guest level access, go to http://www.cisco.com and click on “Register”. To become an authorized Cisco Reseller, submit an online application located at: http://www.cisco.com/go/reseller. Contacts with valid email addresses will receive CCO access notification within three to five days. If you are already a registered Cisco Reseller or Partner, but do not have your login information, please send an email to
[email protected] with your company name and address, and request your CCO access numbers.
Sales, Customer Service, and Technical Support Contact Information Call 800 553-6387 (within USA) or 408 526-7208 (outside of USA), and follow voice prompts to access: • Pre-sales Assistance of Network Validation & Product Information • Reseller Support • Customer Service • Service Contract Sales • Reporting a technical problem/open a trouble ticket • Seminars, Events, Training & Certification Worldwide Reseller Helpline Page: http://www.cisco.com/go/presaleshelp
How to Get More Complete Product Information
ii
Introduction
Cisco Systems Overview Cisco Systems is the worldwide leader in networking for the Internet. Cisco's networking solutions connect people, computing devices and computer networks, allowing people to access or transfer information without regard to differences in time, place, or type of computer system. Cisco provides end-to-end networking solutions that customers use to build a unified information infrastructure of their own, or to connect to someone else's network. An end-to-end networking solution is one that provides a common architecture that delivers consistent network services to all users. The broader the range of network services, the more capabilities a network can provide to users connected to it. Cisco offers the industry's broadest range of hardware products used to form information networks or give people access to those networks; Cisco IOS® software, which provides network services and enables networked applications; expertise in network design and implementation; and technical support and professional services to maintain and optimize network operations. Cisco is unique in its ability to provide all these elements, either by itself or together with partners. Cisco serves customers in three target markets: • Enterprises—Large organizations with complex networking needs, usually spanning multiple locations and types of computer systems. Enterprise customers include corporations, government agencies, utilities, and educational institutions. • Service Providers—Companies that provide information services, including telecommunication carriers, Internet Service Providers, cable companies, and wireless communication providers. • Commercial—Companies or consumers with a need for data networks of their own, as well as connection to the Internet and/or to business partners. Cisco sells its products in approximately 115 countries through a direct sales force, distributors, value-added resellers and system integrators. Cisco has headquarters in San Jose, CA. It also has major operations in Research Triangle Park, NC, Richardson, TX, Chelmsford, MA, Stockley Park, U.K. and Sydney, Australia; as well more than 430 sales and support offices in 60 countries. In contrast to many technology companies, Cisco does not take a rigid approach that favors one technology over the alternatives and imposes it on customers as the only answer. Cisco's philosophy is to listen to customer requests, monitor all technological alternatives, and provide customers with a range of options from which to choose. Cisco develops its products and solutions around widely accepted industry standards. In some instances, technologies developed by Cisco have become industry standards themselves. Every day, Cisco and its customers are proving that networking and the Internet can fundamentally and profitably change the way companies do business. Cisco describes this change in the "Global Networked Business" model. A Global Networked Business is an enterprise, of any size, that strategically uses information and communications to build a network of strong, interactive relationships with all its key constituencies. Cisco Systems Overview
iii
Introduction
The Global Networked Business model leverages the network for competitive advantage by opening up the corporate information infrastructure to all key constituencies. This model employs a self-help mode of information access that is more efficient and responsive than the traditional model of a few information gatekeepers dispensing data as they see fit. Cisco itself is a leading example of a Global Networked Business. By using networked applications over the Internet and its own internal network, Cisco is seeing financial benefits of nearly US$1.4 billion a year, while improving customer/partner satisfaction and gaining a competitive advantage in areas such as customer support, product ordering, and delivery times. Today, Cisco has the world's largest Internet commerce site, with 90% of our orders transacted over the web. Cisco is one of America's greatest corporate success stories. Since shipping its first product in 1986, the company has grown into a global market leader that holds No. 1 or No. 2 market share in virtually every market segment in which it participates. Since becoming a public company in 1990, Cisco's annual revenues have increased from $69 million in that year to $18.9 billion in fiscal 2000. As measured by market capitalization, Cisco is among the largest in the world.
Service and Support Offerings Key Features • Broad range of services and programs—Cisco Systems offers the broadest choice of support services in the industry, including self-maintenance, assistance, online resources, remote TAC, remote consultation, 24 x 7 onsite service, and other onsite professional services. • Corporate commitment—Cisco is making substantial investments in all customer services. Cisco sets goals for and measures customer satisfaction each year; employee bonuses are tied to these goals. • Innovative online support and services—Award-winning Cisco Connection Online (CCO) provides the industry’s best information retrieval, technical support, and electronic commerce. • Experience—All of Cisco’s support teams are staffed by experienced customer service engineers, professionals, and certified consultants and partners. Cisco has rigorous certification programs to ensure that all technical personnel have the knowledge they need to support its customers’ mission-critical applications. • Global presence, experience, and capability—Cisco has a network of global service partnerships to ensure that qualified local service is available no matter how remote the location. Cisco Worldwide Partners complete rigorous certification programs to ensure that they have the knowledge needed to support Cisco customers. Cisco has spare product stocking depots located in the United States, Canada, Europe, Latin America, and Asia for quick availablity of parts to customers. • Quality—Cisco has received ISO 9001 certification, a clear indication of the company’s commitment to quality management and customer satisfaction. Service and Support Offerings
iv
Introduction
• Software Maintenance—Cisco IOS software updates, an entitlement of SMARTnet and SMARTnet Onsite support contracts, keep Cisco solutions up-to-date, allowing for greater performance, features, and security.
Service and Support Offerings Overview Product
Description
Startup Services Total Implementation Services (TIS)
Resellers Buying Through Distribution • Cisco Total Implementation Solutions (TIS) is a portfolio of services that deliver the tools, expertise, and resources needed to install, configure, and implement Cisco equipment. TIS is intended to supplement services that resellers provide, either directly or indirectly, to their customers. Product Components: Installation, Configuration, and Implementation. For more information, see http://www.cisco.com/go/tis Also available for Enterprise, Service Providers, and Small/Medium Businesses. See http://www.cisco.com/public/support_solutions.shtml for more information.
Maintenance Services SMARTnet Maintenance
Provides customers with software maintenance, registered access to CCO, advance replacement of hardware, and technical support required for self-maintenance. SMARTnet maintenance has three delivery options: • SMARTnet Next Business Day (NBD)—8 hours/day, 5 days/week, next-business-day hardware replacement • SMARTnet 8 x 5 x 4—8 hours/day, 5 days/week, 4-hour hardware replacement • SMARTnet 24 x 7 x 4—24 hours/day, 7 days/week, 4-hour hardware replacement Avaiable through resellers and distributors.
SMARTnet Onsite
Provides all the benefits of SMARTnet maintenance, plus one of the following onsite hardware services for repairs: • SMARTnet Onsite—8 hours/day, 5 days/week, next-business-day response • SMARTnet Onsite 8 x 5 x 4—8 hours/day, 5 days/week, 4-hour response • SMARTnet Onsite 24 x 7 x 4—24 hours/day, 7 days/week, 4-hour response Packaged SMARTnet OnSite 24 x 7 x 4 provides SMARTnet OnSite 24x7x4 service in a shrink-wrapped package, allowing it to be effectively marketed through resellers.
Cisco Advance Replacement
Advance Replacement offers customers the flexibility to cover their equipment with an advance replacement service only. Cisco Advance Replacement comes with a full year of advance replacement coverage, guest access to the public portion of Cisco Connection Online (CCO), and a single technical support incident. This service is intended to be used by customers who need to supplement service offered by their reseller with a replacement option from Cisco.
Noncontract and Consulting Services
Cisco provides the noncontract services at current time-and-materials rates. For more information contact Customer Services at 1-800-553-NETS or 1-415-326-1941.
Product Warranty Information Products1
Warranty
Description
90 Day Limited Hardware
• Advanced Replacement of Hardware within 10 Business days from All Cisco hardware and software products RMA release within 90-days of purchase unless otherwise listed on this page. • 90-day Standard Software warranty of defect-free media & conformity with published specifications • Access to Cisco Connection Online (CCO)
One Year Limited Hardware
• Advanced Replacement of Hardware within 10 Business days from RMA release within one year of purchase • 90-day Standard Software warranty of defect-free media & conformity with published specifications • Access to Cisco Connection Online (CCO)
Limited Lifetime2
• Advanced Replacement of Hardware within 10 Business days from FASTHUB, C1900, C2900, C2900XL, C2950, RMA release, until supported life of the product C3500XL, CNO, AIRCA, AIRCMN • 90-day Standard Software warranty of defect-free media & conformity with published specifications • Access to Cisco Connection Online (CCO)
700, 1000, 1400, 1600, 1700, 7200, 800DSL, 800TRAD, AIRBR, AIRANT, AIRAP, C1400, C1600, C5000, C4000V, C4K_FXD, CDM, CE, CR, DWDM, GATEWAY, ICS7700, PHONE, SELSIUS, UBR900, UBR910, UBR9X5, WEBSERV, XDSLCPE
• Return to Factory (RTF) replacement of Hardware within 15 days ship 15300, 153327, 15400, 15454, 15800 3-Year Limited Hardware and 1-Year with RMA approval • One-Year SW support on OS limited access to maintenance releases Software • Guest access to Cisco Connection Online (CCO)
1. All Cisco hardware and software products, unless otherwise listed on this page, are covered under the 90 Day Warranty. Please refer to the Cisco Information Packet shipped with the product to confirm the warranty, or ask your supplier. 2. "Lifetime" Warranty is limited to original owner only and support is subject to product end-of-life terms.
Product Warranty Information
v
Introduction
For More Information See the Cisco Warranty Web site: http://www.cisco.com/univercd/cc/td/doc/es_inpck/
Reseller and Customer Support Reseller Sales and Technical Assistance Contact Information Customer Help Lines
Contact Information
Presales—Reseller Help Line
800 553-6387 (within U.S.) 408 526-7208 (outside U.S.) http://www.cisco.com/go/presaleshelp
[email protected] (e-mail)
Post-Sales—Technical Assistance Center (TAC)
800 553-6387 (within U.S.) 408 526-7209 (outside U.S.)
[email protected] (e-mail)
Helpful Cisco Web Sites Cisco Web Site
URL1
Worldwide Contacts
http://www.cisco.com/go/wwcontacts
Cisco office locations; directions; maps; and sales, partners, and channel contacts.
For customer support tips, software center, online documents, and more.
http://www.cisco.com/go/support http://www.cisco.com/public/Tech_support.shtml http://www.cisco.com/public/technotes/serv_tips.shtml
Cisco Products Quick Reference Guide
http://www.cisco.com/go/guide
Technical Support
This guide is available on line (in PDF and HTML); it is continually updated between bi-yearly printings. CCO login required.
Cisco Subscription Service
http://www.cisco.com/go/subscription
Ordering service for one-time purchase of or annual subscriptions to this guide or other Cisco documents and CDs; order online, or order by phone by calling 800 768-7162 (U.S. or Canada) or 925 327-4072 (outside the U.S.).
Worldwide Distributors Web Site
http://www.cisco.com/go/disti
List, by country, of authorized Cisco Distributors who stock and resell Cisco products.
Distribution Product Reference Guide (DPRG)
http://www.cisco.com/dprg
Complete list of pricing information, part numbers, and more for distribution (2-tier) products. Data is refreshed nightly. CCO login required.
Networking Products Marketplace for Resellers
http://www.cisco.com/go/npmr
An ecommerce web site with a configuration tool to validate channel product options; also select and compare products, check price and availability, and submit your order to your distributor online. CCO login required. http://www.cisco.com/go/eol
End-of-Life Matrix Last order and end-of-life dates for Cisco products.
http://www.cisco.com/go/tools
Sales Tools Central Helpful, easy-to-use Web site with detailed product information, sales tools, sample configurations, and more.
Training Cisco University—Offers detailed course material on the latest technical topics throughout the year targeted for Resellers, Partners and Cisco Sales representatives. Also see the Partner E-Learning Connection.
1. Additional CCO access required for most URLs.
Reseller and Customer Support
vi
http://www.cisco.com/go/ciscou http://cisco.partnerelearning.com
Introduction
Cisco Capital Financing Cisco Systems Capital offers a variety of financing and equipment leasing alternatives, both short term and long term, to customers and partners in the United States, Canada, Europe, Asia, Australia, and Latin America. Cisco Capital’s financial solutions offer customers the ability to acquire new technologies or refresh existing equipment through flexible, easy-to-use programs.
For More Information See the Cisco Systems Capital Web site: http://www.cisco.com/go/financingprograms Within the United States, call 800 730-4090.
Cisco Powered Network (CPN)— Choosing the Best Network Service Provider Cisco Systems recognizes the challenges customers often face when selecting a service provider for Internet access, voice, DSL, virtual private network, cable, or other network services. CPN enables Cisco resellers and Cisco end-user customers to easily identify service providers that offer high levels of quality and reliability. Service providers who display the CPN mark have made a significant commitment to Cisco equipment in their networks and maintain high standards of customer service and support. You can learn more about the Cisco Powered Network program by going to the Web site: http://www.cisco.com/cpn.
Cisco Authorized Refurbished Equipment (US and Canada Only) Cisco Authorized Refurbished Equipment (US and Canada Only) fulfills the demand for refurbished, warranted Cisco equipment that exists in the networking market today. Customers who have a limited budget, or do not require the full capabilities of the newest generation equipment, or find it advantageous to maintain a homogenous computing environment, can now buy Cisco refurbished equipment with the same warranty protection and option to add SMARTnet as new Cisco equipment. In addition, all Cisco Authorized Refurbished Equipment comes loaded with authorized current revision software and Cisco IOS Software license. More information on the program can be found on-line: End Users/Customers: http://www.cisco.com/warp/public/csc/refurb_equipment Resellers: http://www.cisco.com/go/refurb
Cisco Capital Financing
vii
Routers Routers at a Glance Product
Features
Cisco IOS® Software
See the Chapter 9—Cisco IOS Software and Network Management for an overview of Cisco 9-2 IOS Software
Page
Cisco SOHO 70 Series ADSL & G.shdsl Router
ADSL & G.shdsl Routers • Affordable multi-user access DSL access • Security with Packet Filtering Firewall • Powered by Cisco IOS manageability and reliability
1-7
Cisco 700 Series Router
ISDN router • Cisco 76x models: 1 Ethernet port (10BASE-T) and 1-port BRI (NT1 models available) • Cisco 77x models: 4 Ethernet ports (10BASE-T) and 2 analog telephone ports (NT1 models available) • Recommended for up to five users
1-8
Cisco 800 Series Router
ADSL, G.shdsl, IDSL, ISDN, and serial routers with Cisco IOS technologies • 1-port ADSL or G.shdsl or 1-port BRI (optional NT1), IDSL or 1-port serial • Optional 4-port Ethernet hub and 2 analog telephone ports (ISDN models) • Advanced security features • Toll quality voice with VoIP (Cisco 827-4V)
1-10
Cisco 1600 Series Router Modular desktop access router
1-13
• 1- or 2-port Ethernet (10BASE-T) • 1-port BRI (optional NT1) or 1-port sync or async serial • 1 WAN interface card (WIC) slot
Cisco 1700 Series Router Flexible, secure, modular access routers
1-15
• 1-port autosensing 10/100 Fast Ethernet LAN • Modular slots support a wide variety of WAN and voice interface cards • Supports secure Internet, intranet, and extranet access as well as new WAN applications including VPNs, integrated voice/data (VoIP), and broadband services • VLAN Capability • Supports Dual Ethernet Configuration
Cisco 2500 Series Router Fixed-port configuration access routers and servers
1-18
• Single or dual LAN; Ethernet or Token Ring • Router/hub or access server • Dual serial, or single serial (with 8 to 16 async serial ports)
Cisco 2600 Series Router Modular multiservice router and dial access server
1-20
• Single or dual LAN (Ethernet, 10/100 Mbps Ethernet, Token Ring and mixed Ethernet, and Token Ring options) • Wide variety of interface support, including analog and digital, voice, async and sync serial, ISDN, Fractional and channelized T1/E1, Ethernet, analog modems, and ATM • Shares WAN interface cards and network modules with Cisco 1600,1700, and 3600 series
Cisco 3600 Series Router Modular multiservice high-density access router
1-25
• 2-, 4-, and 6-slot models • Wide variety of media support including: Voice/Fax Network Modules and Voice Interface Cards, async and sync serial, BRI and PRI ISDN, channelized T1/E1, Ethernet, Fast Ethernet, Token Ring, digital and analog modems, and ATM • Digital and analog voice/fax over IP or Frame Relay or ATM
Cisco 7100 Series VPN Routers
Large branch and central site VPN router, for a dedicated site-to-site VPN solution See Chapter 5—VPN and Security for information on the Cisco 7100 Series VPN Routers
5-13
Routers at a Glance
1-1
ROUTERS
1
CHAPTER 1
CH A P T E R
Chapter 1
Product
Routers
Features
Cisco 7200 Series Router WAN-edge router providing intelligent services, modularity, high performance, investment
Page 1-30
protection, and scalability in a small form factor • Fully modular, chassis-based • 4- or 6-slot models and choice of system processors for up to 400 kpps performance • Wide variety of LAN and WAN options, including Ethernet, Fast Ethernet, Gigabit Ethernet, Token Ring, FDDI, serial, ISDN, HSSI, ATM, Packet over DS3/E3, Packet over SONET, DPT
Cisco 7400 Series Router • One RU, one port adapter (PA) slot, shares over 40 PAs with 7200 series
1-34
• Ideal for T1/T3/OC-3 WAN CPE and broadband service aggregation • Gigabit Ethernet to Gigabit Ethernet IP services applications platform
Cisco 7500 Series Router High-end services-enabled core and WAN aggregation router for enterprise and service
1-37
Cisco 7600 Internet Router Service provider-class router, with variety of high-speed/SONET/Optical WAN connections
1-40
provider applications • 5-, 7-, and 13-slot models • 1-, 2-, or 4-bus models offering 1, 2, or 4 Gbps backplanes • Wide variety of LAN and WAN options including Ethernet, Fast Ethernet, Gigabit Ethernet, Token Ring, FDDI, serial, ISDN, HSSI, ATM, and Packet over DS3/E3 • • • • •
Consolidated LAN/WAN/MAN in a single platform Also supports Catalyst 6000 series line cards High-volume aggregation of Ethernet traffic (server farms) Wide range of WAN/MAN interfaces from NxDS0, T1, T3 to OC-48 with line rate services Ideal for high-speed WAN & Metro aggregation, Consolidated POP, Internet Data Center (IDC)
Cisco 10000 Series Internet Router
Service provider-class edge services router 1-42 • Optimized for delivering high volume (thousands) of dedicated, leased-line T1/T3 IP circuits • Consistent line-rate performance; scales as you add line cards and enable IP services • Rich IOS-based QoS/CoS features; high-availablity, fully redundant, failover architecture • T3 and OC-12 interfaces; support up to 2016 T1s per 10008 chassis • With IPsec VPN Service Modules, deliver over 100,000 IPsec tunnels in a single Cisco 10008 • Ideal for MPLS VPN implementations
Cisco 12000 Series Internet Router
Industry-leading, service provider-class, next generation backbone router platform offering 1-44 configuration versatility and superior distributed architecture • 6/10/16 slot models; 10 Gbps (full duplex) per slot from 120 to 320 Gbps total switching capacity • 8/12/16 slot models; 2.5 Gbps (full duplex) per slot from 40 to 80 Gbps total switching capacity • Multiple chassis sizes (from quarter to full), to meet space requirements and control costs • Unprecedented class of service features such as priority based congestion control (WRED) and dedicated low latency queuing for guaranteed packet priority delivery • Extensive portfolio of line cards offer leading edge technologies (POS, ATM, DPT, GE/FE, etc), support a wide range of networking speeds (DS1-OC-192), and provide investment protection through line card compatibility across chassis products
Cisco SN 5420 Series Storage Router
• Enables direct access to storage systems anywhere on an IP network • Enables SCSI over IP (iSCSI); the first storage implementation based on IP standards
Routers at a Glance
1-2
1-47
Chapter 1
Routers
Sample Routing Solutions Overview—WAN & Internet Data Center CHAPTER 1 ROUTERS
Sample Routing Solutions Overview—WAN & Internet Data Center
1-3
Chapter 1
Routers
Fixed Ports Only
X
X
120000 Series
10000 Series
7600 Series
7500 Series
7400 Series
7200 Series
7100 Series
3600 Series
2600 Series
2500 Series
1700 Series
1600 Series
800 Series
700 Series
SOHO 70 Series
Cisco Routers Port Matrix
X
Fixed & Modular Ports
X
X
X
X
X1
X
X2
Modular Ports Only
X
X
X
X
X
X
LAN Ports 10-MB Ethernet
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10-MB Ethernet (fiber) 100-MB Ethernet
X
X
100-MB Ethernet (fiber) 10/100-MB Eth
X
Integrated Eth. Hub
X
X
X
100 VG Token Ring
X
X
X3
FDDI/CDDI ATM
X
X
X
X
Gigabit Ethernet
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
WAN Ports Sync Serial
X
Sync Serial w/ CSU
X
X
X
X
X
X
X
X
X
X
X
ISDN BRI (S/T)
X
X
X
X
X
X
X
X
X
X
X
ISDN BRI (U)
X
X
X
X
X
X
X
X
X
X
X
ISDN PRI/Ch T1
X
X
X
X
X
X
X
ISDN PRI w/ CSU
X
X
X
X
X
X
X
X
X
X
Async
X
Analog/POTS
X
X
X
X
X
Integrated Modems HSSI
X
X
X
X
X
X
DS3
X
X
X
X
X
X
X
X
X
ATM OC-3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ATM OC-12 ATM
X
X
ATM - T1/E1
X
X
X
X
SONET OC-x/STM-x ADSL
X
X
G.shdsl
X
X
IDSL
X
Ethernet
X
X X
DPT
X
X
Voice Ports Analog
X
X
X
Digital
1. Cisco 3660 only 2. Cisco 3620 and 3640 3. Cisco 7206 only
Cisco Routers Port Matrix
1-4
X
X
X
X
X
X
X
X
X
Chapter 1
Routers
Memory Information for Distribution Routers Default Slots Memory
Default Max Memory Configuration (Notes)
SOHO 70 Series
Flash DRAM
1 1
8 MB 16 MB
8 MB 16 MB
700 Series
Flash DRAM
0 1
1 MB 1 MB 1.5 MB (On board) 2 MB
Flash 801 - 804, 802/804 IDSL DRAM
1 1
8 MB 4 MB (On board)
12 MB 12 MB
805
Flash DRAM
1 1
4 MB 8 MB (On board)
12 MB 16 MB
806, 826, 827, Flash 827-4V, 828 DRAM
1 1
8 MB (806: 12 MB) 16 MB (806: 12 MB) 4 MB On board + 4 MB Mini Flash 16 MB (827-4V: 32 MB 24 MB)
1600 Series
Flash DRAM
1 1
4 MB 8 MB (On board)
1720
Flash DRAM
1 1
8 MB 16 MB 32 MB (On board) 48 MB
1751
Flash DRAM
1 1
16 MB 32 MB
48 MB 96 MB
2500 Series
Flash DRAM
2 1
8 MB 4 MB
16 MB 16 MB
Slot 0 = 8 MB
2600 Series
Flash (261x) Flash (262x,265x) DRAM (261x, 262x) DRAM (265x)
1 1 2 2
8 MB 8 MB 32 MB 32 MB
16 MB 32 MB 64 MB 128 MB
Slot 0 = 8 MB Slot 0 = 8 MB Slot 0 = 32 MB; Slot 1 = empty Slot 0 = 32 MB; Slot 1 = empty
Flash (SIMM) DRAM
2 2 4
0 8 MB 32 MB
32 MB 32 MB 64 MB (3620) 128 MB (3640)
Slot 0 = 8 MB Slot 0 = 16 MB; Slot 1 = 16 MB
3660
Flash (PCMCIA) Flash (SIMM) SDRAM
2 2 2
0 8 MB 32 MB
32 MB 64 MB 256 MB
7100 Series
Flash (PCMCIA) System SDRAM Packet SDRAM
2 2
48 MB 64 MB 64 MB
110 MB 256 MB 64 MB
7200 Series
Flash (PCMCIA) 2 Flash (non-volatile, fixed config) Flash (C7200-IO-FE bootflash) 1 Flash (C7200-IO-2FE, 1 C7200-IO-GE/E bootflash) DRAM (NPE-225) 1 DRAM (NPE-300) 4 DRAM (NPE-400) 1 DRAM (NSE-1) 1
20 MB 128 KB 4 MB 4 or 8 MB
128 MB 128 KB 4 MB 4 or 8 MB
128 MB 32+128 MB 128 MB 128 MB
256 MB 32+256 MB 512 MB 256 MB
7400 Series
Flash (PCMCIA) DRAM (NSE-1) BB DRAM (NSE-1) CP
2 1 1
64 MB 256 MB 128 MB
128 MB 512 MB 512 MB
7500 Series
Flash (PCMCIA) RSP2, RSP4+ Flash (PCMCIA) RSP8 Flash (SIMM) DRAM (RSP2) DRAM (RSP4+, RSP8) DRAM (VIP2-40) DRAM (VIP2-50) DRAM (VIP4-50/80)
1 2 1 4 2 1 1 1
16 MB 20 MB 8 MB 32 MB 64 MB 32 MB 32 MB 64 MB
20 MB 40 MB 8 MB 128 MB 256 MB 64 MB 128 MB 256 MB
7600 Series
Flash (PCMCIA) DRAM (Sup 2) DRAM (MSFC2) DRAM (PFC2)
1 1 1 1
16MB 128MB 128MB 128MB
20 MB 512 MB 512 MB 256 MB
3620 and 3640 Flash (PCMCIA)
4 MB On board + 4 MB Mini Flash
4 MB On board + 4 MB Mini Flash
16 MB 24 MB Uses Mini Flash
Slot 0 = 48 MB Slot 0 = 64 MB
Slot 0 = 128MB DIMM Slot 0 = 32MB DIMM, Slot 2 = 128 DIMM Slot 0 = 128MB SoDIMMs Slot 0 = 128MB DIMM
Memory Information for Distribution Routers
1-5
ROUTERS
Memory Type
CHAPTER 1
Router
Chapter 1
Router
Memory Type
10000 Series Flash (PCMCIA) Flash (Internal) Shared (PRE-1) DRAM (PRE-1)
12000 Series Flash (PCMCIA) DRAM
Default Slots Memory
Default Max Memory Configuration (Notes)
2 1 1 1
48 MB 32 MB 128 MB 512 MB
128 MB 32 MB 128 MB 512 MB
2 2
20 MB 128 MB
20 MB 256 MB
Memory Information for Distribution Routers
1-6
Routers
1 x 48MB ships as default; 128MB is optional
Chapter 1
Routers
When to Sell Sell This Product
When a Customer Needs These Features
Cisco SOHO 77
• 1 Ethernet and 1 ADSL port with Cisco IOS manageability and reliability
Cisco SOHO 78
• 4-port Ethernet Hub and 1 G.shdsl port with Cisco IOS manageability and reliability
Key Features • Supports Cisco IOS software—The industry standard software that powers 80 percent of the Internet • Multi-user access with NAT allowing users to share a single DSL line • Standard security with ACLs, PAT/NAT, PAP/CHAP, MS-CHAP, Lock and Key
Competitive Products • • • • •
3Com: OfficeConnect 810 Alcatel: Speed Touch Pro Router Cayman: 3220H Efficient: 5861, 5660 Lucent: CellPipe 50A
• • • •
Netopia: R6100, 4533 Westel: Wirespeed 36R566 Zyxel: 641, 782 Nokia: MW1352
Specifications Feature
SOHO 77
SOHO 78
Fixed LAN Ports (connections)
1-port Ethernet (10BASE-T)
4-port Ethernet (10BASE-T)
Fixed WAN Ports (connections)
1-port ADSL
1-port G.shdsl
Modular Slots
None
None
Flash Memory
8 MB
8 MB
DRAM Memory
16 MB
16 MB
IOS Feature Pack—IP
SSOHOC-12103XP=
SSOHOC-12103XP=
Power Supply
External
External
Dimensions (HxWxD)
2.0 x 9.9 x 8.3 in.
2.0 x 9.9 x 8.3 in.
For More Information See the Cisco SOHO 77 Web site: http://www.cisco.com/go/soho70
Cisco SOHO 70 Series ADSL and G.shdsl Routers
1-7
ROUTERS
The Cisco SOHO 70 series provides an affordable, secure, multi-user digital subscriber line (DSL) access solution to small office/home office customers while reducing deployment and operational costs for service providers. Through the power of Cisco IOS software technology, the Cisco SOHO 77 ADSL and SOHO 78 G.shdsl routers provide superior manageability and reliability.
CHAPTER 1
Cisco SOHO 70 Series ADSL and G.shdsl Routers
Chapter 1
Routers
Cisco 700 Series The Cisco 700 series ISDN router provides affordable, fast Internet access for every PC in a small office or home-based business of up to five users. Small offices that want to provide Internet access with ISDN for every PC can use a single Cisco 700, instead of multiple modems or TAs and multiple phone lines. These routers are more secure, easier to deploy, less expensive to manage, and cost less to use than modems.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 761M
• Simple Internet Access • Built-in NT1 for U.S. and Canada
Cisco 775M, 776M
• Internet access for home-based businesses • Two analog/plain old telephone service (POTS) interfaces to allow standard telephone, fax, or modem to share ISDN line • A cost-effective, 10BASE-T, unmanaged hub • Built-in NT1 for U.S. and Canada (Cisco 776M) • Interfaces allow standard telephone, fax, or modem to share ISDN line
Cisco 761M-1CAPI, 775M-1CAPI
• CAPI for access to leading Internet service providers and online services including faxing, e-mail, and banking • RVS-COM-lite applications
Key Features • IP and IPX routing for many PCs (recommended for up to five) • Some modules include a 4-port hub and 2 POTS ports for all-in-one device supporting fax, phone, and PCs • Security features include PAT/NAT, PAP, CHAP, caller ID callback, and access lists, for more security than a modem or TA • Dynamic Host Configuration Protocol (DHCP) relay agent and server for dynamic addressing of attached workstations • Two B-channels for phone or data and automatic B-channel aggregation with Multilink PPP • Always-on ISDN • Low ISDN usage cost with bandwidth optimization—Compression, Bandwidth-on-Demand B-channel aggregation, Dial-on-Demand, and X.25 over D channel • X.25 over B channel for BTs CARDWAY TPAD Services
Competitive Products • 3Com: Office Connect LAN Modem • • AVM: ISDN cards with KEN! or Network Distributed ISDN • software; ISDN cards with NetWare MultiProtocol Router for ISDN • • BinTec: Bingo • • Eicon: Diva T/A ISDN LAN Modem •
Cisco 700 Series
1-8
Elsa: Lancom 1000 Intel: Express ER8011 Netopia: R3100-UP or R3100U Nortel/Bay: NetGear RT328 Zyxel: Presige 100 or 1001H
Chapter 1
Routers
Specifications Cisco 775M
Cisco 776M
1-port Ethernet (10BASE-T)
4-port Ethernet hub (10BASE-T)
4-port Ethernet hub (10BASE-T)
Fixed WAN Ports (connections)
1-port ISDN BRI (S/T)
1-port ISDN BRI (S/T) 2-port POTS
1-port ISDN BRI (U) 2-port POTS
Modular Slots
None
None
None
Flash Memory
1 MB
1 MB
1 MB
DRAM Memory
1.5 MB (default) 2 MB (max)
1.5 MB (default) 2 MB (maximum)
1.5 MB (default) 2 MB (maximum)
Dimensions (HxWxD)
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
1.6 x 8.3 x 9 in.
ROUTERS
Cisco 761M
Fixed LAN Ports (connections)
Cisco IOS Software and Memory Requirements The Cisco 700 Series ships with the latest version of Cisco 700 Software. No software feature packs are needed.
Selected Part Numbers and Ordering Information1 Cisco 700 Series Router Chassis1 CISCO761M CISCO776M CISCO761M-1CAPI CISCO775M-1CAPI CISCO775M-G1 CISCO775M CISCO775M-G2 CISCO776M-G1
ISDN Router with SF700-ROX-CE-4.x ISDN Router w/ NT-1, 2 POTS, w/ 4-port Hub (U.S.) 1-port 10BASE-T, 1-port BRI (S/T), 1-user CAPI 4-port 10BASE-T Hub, 1-port BRI (S/T), 2 POTS, 1-user CAPI ISDN Router w/ 4-port Hub, 2 POTS (Canada, Netherlands) ISDN Router w/ 4-port Hub, 2 POTS (U.S., MX) ISDN Router w/ 4-port Hub, 2 POTS (EURO, AU, HK) ISDN Router w/ NT-1, 2 POTS, w/ 4-port Hub (Canada)
Cisco 700 Series Memory Options MEM760-512D=
Cisco 700 Series 0.5 MB DRAM Memory
Cisco 700 Series Software Upgrades CD700-1CAPI-4.4= CD700-5CAPI-4.4=
Cisco 700 1-user Remote CAPI Software Cisco 700 5-user Remote CAPI Software
Cisco 700 Series Accessories CAB-760-CON= PWR760-770=
Cisco 700 Series Console Cable Cisco760-770 Family AC Power Supply—spare
Cisco 700 Series Basic Maintenance CON-SNT-PKG1
CHAPTER 1
Feature
Cisco 700 Series SMARTnet Maintenance (8 x 5 x NBD)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 700 Series Web site: http://www.cisco.com/go/700
Cisco 700 Series
1-9
Chapter 1
Routers
Cisco 800 Series The Cisco 800 series router provides enhanced network security and proven reliability through Cisco IOS software, for small offices and telecommuters. It connects users to the Internet or to a corporate LAN via one ADSL, G.shdsl, IDSL, ISDN, or serial connection (up to 512 Kbps), or with an Ethernet WAN port connected to an external broadband modem.
When to Sell Sell This Product When a Customer Needs These Features • • • •
Cisco 800 Series
Companies who with Cisco IOS-based networks who want to add telecommuters Service providers who offer value-added services to small offices VARs who are familiar with Cisco IOS software and want to profitably service small office customers Ethernet LAN ports and variety of WAN connectivity, including: ISDN BRI, Frame Relay, ADSL, G.shdsl, async dialup (see Specifications for details)
Key Features • Supports Cisco IOS software, which powers 80 percent of the Internet • Fixed configuration support for several types of WAN connections • Standard security with ACLs, PAT/NAT, PAP/CHAP, MS-CHAP, Lock and Key, and Generic Routing Encapsulation (GRE) tunneling • Enhanced security with optional Cisco IOS Firewall and IPSec encryption • Toll quality voice with VoIP on Cisco 827-4V • Optional integrated 4-port hub (default on 826 and 828) and 2 analog POTS (Cisco 802 and 804) for all-in-one capability of data, phone, and fax over one ISDN line • Bandwidth optimization features such as compression, Bandwidth-on-Demand, Dial-on-Demand, Always-On-Dynamic-ISDN (AODI), and X.25 over D channel (Cisco 801- 804) • Support for CAPI applications in the European market
Competitive Products • • • • •
3Com: Office Connect Remote 511/521 Alcatel: Speed Touch Pro Routers Ascend: Pipeline 75/85 Efficient: 5861 / 5660 Intel: Express 8100
Specifications
Cisco 800 Series
1-10
• • • •
Netopia: R3100, R6100, 4533 Nortel/Bay: Nautica 250 Nokia: MW1352 Zyxel: 782
Chapter 1
Routers
Cisco 801, 802, 803, 804, 805, and 806 802
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
4-port Ethernet hub (10BASE-T)
803
804
Fixed WAN Port Connections
1-port ISDN BRI (S/T)
1-port ISDN BRI (U) NT-1
1-port ISDN BRI 1-port ISDN BRI 1-port serial (up to 1-port Ethernet (S/T) (U) NT-1 512 Kbps) (10BASE-T) 2 analog telephone 2 analog telephone ports ports
Flash Memory
8 MB (default) 12 MB (max)
8 MB (default) 12 MB (max)
8 MB (default) 12 MB (max)
8 MB (default) 12 MB (max)
4 MB (default) 12 MB (max)
12 MB (default) 12 MB (max)
DRAM Memory
4 MB (default) 12 MB (max)
4 MB (default) 12 MB (max)
4 MB (default) 12 MB (max)
4 MB (default) 12 MB (max)
8 MB (default) 16 MB (max)
16 MB (default) 32 MB (max)
Power Supply
External
External
External
External
External
External
Dimensions (HxWxD)
2.0 x 9.9 x 8.3 in.
Same as Cisco 801 Same as Cisco 801 Same as Cisco 801 Same as Cisco 801 Same as Cisco 801
4-port Ethernet hub (10BASE-T)
805
806
1-port Ethernet (10BASE-T)
4-port Ethernet hub (10BASE-T)
Cisco 800 Series IDSL, ADSL, and G.shdsl Models (802 IDSL, 804 IDSL, 826, 827, 827-4V, and 828) Feature
802 IDSL
804 IDSL
826
827
827-4V
828
Fixed LAN Port Connections
1-port Ethernet (10BASE-T)
4-port Ethernet hub (10BASE-T)
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
4-port Ethernet hub (10BASE-T)
Fixed WAN Port Connections
1-port IDSL
1-port IDSL
1-port ADSL over 1-port ADSL ISDN
1-port ADSL
1-port G.shdsl
Flash Memory
8 MB (default) 12 MB (max)
8 MB (default) 12 MB (max)
8 MB (default) 16 MB (max)
8 MB (default) 16 MB (max)
8 MB (default) 16 MB (max)
8 MB (default) 16 MB (max)
DRAM Memory
4 MB (default) 12 MB (max)
4 MB (default) 12 MB (max)
16 MB (default) 32 MB (max)
16 MB (default) 32 MB (max)
24 MB (default) 32 MB (max)
16 MB (default) 32 MB (max)
Power Supply
External
External
External
External
External
External
Dimensions (HxWxD)
2.0 x 9.9 x 8.3 in.
Same as Cisco 802 Same as Cisco 802 Same as Cisco 802 Same as Cisco 802 Same as Cisco 802 IDSL IDSL IDSL IDSL IDSL
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Feature Packs, you need, at a minimum, the amount of memory shown in the following table: Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
CD08-C-12.0.5=
IP
12.0(5)T
8 MB (801-804) 4 MB (805)
4 MB(801-804) 8 MB (805)
CD08-CP-12.0.7=
IP Plus
12.0(5)T
8 MB (801-804) 4 MB (805)
4 MB (801-804) 8 MB (805)
CD08-CH-12.0.5=
IP/FW
12.0(5)T
8 MB (801-804) 4 MB (805)
4 MB (801-804) 8 MB (805)
CD08-BHL-12.0.7=
IP/IPX/FW Plus IPSec56
12.0(5)T
8 MB (801-804) 8 MB (805)
8 MB (801-804) 8 MB (805)
CD806C-12.2.1XE=
IP
12.2(1)XE
12 MB
16 MB
16 MB
DSL Products—Cisco 826, 827, 827-4V, and 828 S820C-12103XG=
IP
12.1(1)XG
8 MB
S820CHK2-12103XG=
IP Firewall Plus IPSec 3DES
12.1(1)XG
8 MB
24 MB
S820CV-12103XG=
IP Voice
12.1(1)XG
8 MB
24 MB
S820BVP-12103XG=
IP/IPX Plus Voice
12.1(1)XG
8 MB
24 MB
S820BVP-12103XG=
IP Firewall Voice Plus IPSec 3DES (827-4V Only)
12.1(1)XG
8 MB
24 MB
Cisco 800 Series
1-11
ROUTERS
801
Fixed LAN Port Connections
CHAPTER 1
Feature
Chapter 1
Routers
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn 2. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.
Selected Part Numbers and Ordering Information1 Cisco 801-806 Routers1 CISCO801 CISCO802 CISCO803 CISCO804 CISCO805 CISCO806
1-port 10BASE-T, 1-port BRI (S/T), IP s/w 1-port 10BASE-T, 1-port BRI (U) w/ NT-1, IP s/w 4-port 10BASE-T hub, 1-port BRI (S/T), 2-port POTS, IP s/w 4-port 10BASE-T hub, 1-port BRI (U) w/ NT-1, 2-port POTS, IP s/w 1-port 10BASE-T, 1-port serial, IP s/w 4-port 10BASE-T LAN, 1-port 10BASE-T WAN, IP s/w
Cisco 802 & 804 IDSL Routers Cisco802-IDSL Cisco804-IDSL
IDSL/Ethernet Router with Internet DSL IDSL/Ethernet Router, 4-port hub with Internet DSL
Cisco 801 & Cisco 803 Routers w/CAPI CISCO801-CAPI CISCO803-CAPI
ISDN/Ethernet Router with one-user CAPI license ISDN/Ethernet Router with one-user CAPI license, 4-port hub
Cisco 826, 827, 827-4V ADSL & 828 G.shdsl Routers CISCO826 CISCO827 CISCO827-4V CISCO828
1-port ADSL over ISDN, 1-port 10BASE-T, IP s/w 1-port ADSL, 1-port 10BASE-T, IP s/w 1-port ADSL, 1-port 10BASE-T, 4 ports FXS, IP/Voice s/w 1-port G.shdsl, 4-port 10BASE-T hub, IP s/w
Cisco 801 CAPI & 803 CAPI CD Feature Packs CD08-BHL-12.0.7XV= CD08-BP-12.07.XV= CD800-5CAPI=
Cisco 800 Series IP/IPX/FW Plus IPSec 56 Cisco 800 Series IP/IPX/Plus CAPI 5 User CD
Cisco 802 & 804 IDSL CD Feature Packs CD08-IC-12.0.5T= CD08-ICHL-12.0.5T= CD08-IBHL-12.0.5T=
Cisco 800 Series Internet DSL Cisco 800 Series Internet DSL FW IPSec56 Cisco 800 Series Internet DSL IPX FW IPSec56
Cisco 800 Series Memory Options MEM800-4F= MEM800-8F= MEM800-4D= MEM800-8D= MEM820-8U16F MEM820-16U20D MEM820-16U24D MEM820-16U32D MEM820-24U32D
Cisco 800 Series, 4 MB Flash Mini-Card Cisco 800 Series, 8 MB Flash Mini-Card Cisco 800 Series, 4 MB DRAM DIMM Cisco 800 Series, 8 MB DRAM DIMM Cisco 820 Flash upgrade 8Mbyte-16Mbyte Cisco 820 DRAM upgrade 16Mbyte-20Mbyte Cisco 820 DRAM upgrade 16Mbyte-24Mbyte Cisco 820 DRAM upgrade 16Mbyte-32Mbyte Cisco 820 DRAM 24Mbyte upgrade to 32 Mbytes
Cisco 800 Series Accessories PWR-800-WW1= PWR-805-WW1= PWR-820-WW1 PWR-828-WW1=
Cisco 800 Series, AC Power Supply Spare Cisco 805 Series, AC Power Supply Spare Cisco 820 Series Universal, External AC Power Supply Cisco 828 Series Universal, External AC Power Supply
Cisco 800 Series Basic Maintenance CON-SNT-PKG1
Cisco 800 Series SMARTnet Maintenance (8x5xNBD)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 800 Series Web site: http://www.cisco.com/go/800
Cisco 800 Series
1-12
Chapter 1
Routers
Cisco 1600 Series
Sell This Product
When a Customer Needs These Features
Cisco 1601-R
• One serial port with synchronous performance up to T1/E1 speeds for Frame Relay, leased line, Switched 56, SMDS, and X.25 WAN services, or async performance up to 115.2 kbps • Higher speeds than ISDN or Switched 56 kbps
Cisco 1602-R
• A 56-kbps serial port (Frame Relay, leased line, Switched 56, SMDS, and X.25) • Low-cost integrated channel service unit (CSU)/data service unit (DSU) at 56 kbps • CSU/DSU diagnostics information and configuration via Cisco IOS software command-line interface
Cisco 1603-R and 1604-R
• ISDN (BRI) and ISDN leased-line connectivity • Built-in NT1 for U.S. and Canada (Cisco 1604)
Cisco 1605-R
• Two Ethernet ports to isolate internal secure LAN from perimeter LAN (exposed to Internet) • Single flexible WAN connection (any WAN interface card)
Key Features • Cisco IOS software-based • One modular WAN interface card slot for adding and changing WAN connections for flexibility and investment protection • Optional firewall and virtual private network software • Optional integrated DSU/CSU up to T1 speed and NT1 for North America • Flash Memory (PC Card) and primary memory upgrade capability for easy software image maintenance • FastStep and ConfigMaker GUI-based utilities for easy setup and troubleshooting
Competitive Products • 3Com: NETBuilder 1xx, 22x, 422 • Ascend: Pipeline 130, 220
• Nortel/Bay: AN, Nautica Clam
Specifications Feature
Cisco 1601-R
Cisco 1602-R
Cisco 1603-R
Cisco 1604-R
Cisco 1605-R
Fixed LAN Ports (connections)
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
1-port Ethernet (10BASE-T)
2 Ethernet ports (10BASE-T)
Fixed WAN Ports (connections)
1-port sync/async serial
1-port sync serial, 56 kbps 4-wire DSU/CSU
1-port ISDN BRI (S/T) 1-port ISDN BRI (U)
None
Cisco 1600 Series
1-13
ROUTERS
When to Sell
CHAPTER 1
The Cisco 1600 is a low-cost option for flexible Internet/intranet access for small branch offices and small businesses. In addition to one fixed WAN and one Ethernet port, it supports one modular WAN interface card, allowing customers to add or change WAN ports as needed. WAN options include ISDN, leased lines (T1/E1), Frame Relay, Switched 56, Switched Multimegabit Data Service (SMDS), and X.25. The Cisco 1600 also provides VPN capabilities based on IPSec and the DES encryption standard. Other security features, such as firewall functionality, can be enabled via Cisco IOS.
Chapter 1
Feature
Cisco 1601-R
Cisco 1602-R
Cisco 1603-R
Cisco 1604-R
Routers
Cisco 1605-R
WAN Interface Card See Part Numbers and Same as Cisco 1601-R See Part Numbers and Same as Cisco 1603-R Same as Cisco 1601-R Ordering Information Ordering Information (WIC) Modules Flash Memory
4 MB (default) 16 MB (max)
Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R
DRAM Memory
8 MB (default) 24 MB (max)
Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R
Dimensions (HxWxD)
2.19 x 11.15 x 8.67 in. Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R Same as Cisco 1601-R
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Software Feature Packs, you need the amount of memory shown in the following table: Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
CD16-C-12.1=
IP only
12.1(1) or 12.1(1)T
4 MB
10 MB
CD16-CL-12.1=
IP Plus IPSec 56
12.1(1) or 12.1(1)T
4 MB
12 MB
CD16-CH-12.1=
IP/Firewall
12.1(1) or 12.1(1)T
4 MB
12 MB
CD16-QHL-12.1=
IP/IPX/AT/IBM/Firewall Plus IPSec 56
12.1(1) or 12.1(1)T
6 MB
16 MB
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn 2. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.
Selected Part Numbers and Ordering Information1 Cisco 1600 Series Router Chassis1 CISCO1601-R CISCO1602-R CISCO1603-R CISCO1604-R CISCO1605-R
Cisco 1601-R Ethernet/Serial Modular Router Cisco 1602-R Ethernet/Serial Modular Router w/56 kbps DSU 4-wire Cisco 1603-R Ethernet/ISDN-BRI Modular Router Cisco 1604-R Ethernet/ISDN-BRI Modular Router w/NT1 Cisco 1605-R Dual Ethernet/WAN Interface Card Slot Router
Cisco 1600 Series WAN Interface Cards (WICs) WIC-1T= WIC-1B-S/T= WIC-1B-S/T-LL= WIC-1B-U= WIC-1DSU-T1= WIC-1DSU-56K4=
1-port Serial WAN Interface Card 1-port BRI (S/T) WAN Interface Card (Dial and Leased Line) 1-port BRI Leased Line WAN Interface Card (1603/1604 only) 1-port BRI (U) w/ NT-1 WAN Interface Card (Dial and Leased Line) 1-port Serial w/ T1/Fractional T1 DSU/CSU WAN Interface Card 1-port Serial w/ 4-Wire 56 Kbps DSU/CSU WAN Interface Card
Cisco1600 Series Memory Options MEM1600-6FC= MEM1600-8FC= MEM1600-12FC= MEM1600-16FC= MEM1600-16D=
Cisco 1600 Series, 6 MB Flash Card Cisco 1600 Series, 8 MB Flash Card Cisco 1600 Series, 12 MB Flash Card Cisco 1600 Series, 16 MB Flash Card Cisco 1600 Series, 16 MB DRAM SIMM
Cisco 1600 Series Accessories CAB-1600-CON= PWR-1600-WW1=
Cisco 1600 Series, Console Cable Cisco 1600 Series, AC Power Supply (Worldwide)
Cisco 1600 Series Basic Maintenance CON-SNT-PKG2
Cisco 1600 Series SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 1600 Series Web site: http://www.cisco.com/go/1600 Cisco 1600 Series
1-14
Chapter 1
Routers
Cisco 1700 Series
Sell This Product
When a Customer Needs These Features
Cisco 1720
• Secure data-only access solution that adapts to customers’ evolving network requirements • Support for data applications including VPNs and broadband access services • A broad array of WAN services supported, including Frame Relay, leased line, ADSL, ISDN BRI, X.25, SMDS and more • 3DES VPN encryption at full T1/E1 speeds
Cisco 1751
All the above, plus: • Digital Voice Support • IEEE 802.1Q VLAN Support • Ample default memory to support feature rich Cisco IOS software images
Key Features • Cisco IOS software-based • Support for up to 4 serial interfaces or 2 ISDN BRI; 1 autosensing 10/100 Mbps Fast Ethernet LAN connection; 1 auxiliary (AUX) port for dial-up management or low-speed asynchronous connections (up to 112.5 kbps) • Flexibility—1700 Series supports a diverse set of WAN and Voice Interface Cards that are shared with the 1600 (WAN only), 2600, and 3600 series routers enabling field upgradeability to evolve with the needs of growing businesses • Integrated Device—Cisco 1700 series combines WAN routing, VPN and multiservice access in a single device • Expansion Slot—Supports optional hardware VPN module for wire-speed IPSec 3DES encryption and can enable future technologies • Integrated Security—The 1700 series supports context-based access control for dynamic firewall filtering, denial-of-service detection and prevention, Java blocking, real-time alerts, Intrusion Detection System (IDS), and encryption. • IEEE 802.1Q VLAN Support (Cisco 1751 only)
Competitive Products • 3Com: OfficeConnect NETBuilder • Ascend: Pipeline 130 • Nortel/Bay: AN
• Motorola: Vanguard 6425 (only competes with Cisco 1751) • Nortel/Micron: V/IP Gateway (only competes with Cisco 1751)
Cisco 1700 Series
1-15
ROUTERS
When to Sell
CHAPTER 1
The Cisco 1700 Series of modular access routers are designed and priced to provide a cost-effective integrated e-business platform for small and medium-sized businesses and enterprise small branch offices. They deliver high-speed network access, comprehensive security features, and multiservice data/voice/video/fax integration to meet the most demanding e-business requirements. The Cisco 1720 routers provide flexible, high-performance data access, and the Cisco 1751 routers are optimized for both voice and data traffic, providing a simple and cost-effective path to multiservice networking.
Chapter 1
Routers
Specifications Feature
Cisco 1720
Cisco 1751
Fixed LAN Ports (connections)
1-port autosensing 10/100 Mbps Ethernet (10/100BASE-T)
1-port autosensing10/100 Mbps Ethernet (10/100BASE-T)
Fixed WAN Ports
None
None
Modular Slots
2 WAN slots
3 slots (2 WAN or Voice slots and 1 Voice slot)
WAN Interface Card (WIC) See Part Numbers and Ordering Information Modules
Same as Cisco 1720
Voice Interface Cards (VIC) Modules
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Flash Memory
8 MB (default): 16 MB (max)
1751 base model: 16 MB (default); 16 MB (max) 1751-V multiservice ready configuration: 32 MB (default); 32 MB (max)
DRAM Memory
32 MB (default); 48 MB (max)
1751 base model: 32 MB (default); 96 MB (max) 1751-V multiservice-ready configuration: 64 MB (default); 128 MB (max)
Dimensions (HxWxD)
3.1 x 11.2 x 8.7 in.
4.0 x 11.2 x 8.7 in.
Cisco IOS Software and Memory Requirements1 Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory DRAM Memory Required Required
Cisco 1700 Series—Software Feature Packs for Cisco IOS Release 12.1 Mainline CD17-C- 12.x
IP only IP/ADSL
12.1 Mainline
4 MB 8 MB
16 MB 20 MB
CD17-CH-12.x CD17-CP-12.x
IP/FW
12.1 Mainline
4 MB
20 MB
IP Plus
12.1 Mainline
4 MB
20 MB
CD17-CHK2-12.x
IP/FW Plus IPSEC 3DES
12.1 Mainline
8 MB
32 MB
CD17-CVP-12.x
IP/Voice Plus
12.1 Mainline
8 MB
24 MB
CD17-CHV-12.x
IP/FW/Voice Plus
12.1 Mainline
8 MB
24 MB
CD17-CHVK2-12.x
IP/FW/Voice Plus IPSEC 3DES
12.1 Mainline
8 MB
24 MB
Cisco 1700 Series—Software Feature Packs for Cisco IOS Release 12.1T CD17-C- 12.x
IP only
12.1T
4 MB
16 MB
CD17-CH-12.x
IP/FW
12.1T
4 MB
20 MB
CD17-CP-12.x
IP Plus
12.1T
8 MB
24 MB
CD17-CK2-12.x
IP Plus IPSEC 3DES
12.1T
8 MB
32 MB
CD17-CHK2-12.x
IP/FW Plus IPSEC 3DES
12.1T
8 MB
32 MB
CD17-CVP-12.x
IP/Voice Plus
12.1T
8 MB
32 MB
CD17-CHV-12.x
IP/FW/Voice Plus
12.1T
8 MB
32 MB
CD17-CVK2-12.x
IP/Voice Plus IPSEC 3DES
12.1T
8 MB
32 MB
CD17-CHVK2-12.x
IP/FW/Voice Plus IPSEC 3DES
12.1T
8 MB
32 MB
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn
Selected Part Numbers and Ordering Information1 Cisco 1700 Series Modular Access Routers1 CISCO1720 CISCO1750 CISCO1750-2V CISCO1750-4V CISCO1751 CISCO1751-V
10/100BASE-T Modular Router w/ 2 WAN slots, Cisco IOS IP SW 10/100 Modular Router w/1 VIC, 2WIC/VIC slots, Cisco IOS IP SW 10/100 Modular Router w/2 Voice channels, IOS IP/VOICE + SW 10/100 Modular Router w/4 Voice channels, IOS IP/VOICE + SW 10/100 Modular Router w/ 3 slots, IOS IP 10/100 Modular Router w/Voice, IOS IP/VOICE Plus
Cisco 1700 Series
1-16
Chapter 1
Routers
CISCO1720-ADSL CISCO1750-ADSL
10/100BASE-T Modular ADSL Router 10/100BASE-T Modular ADSL Router
SEC17-VPN= SEC17-VPN-M= SEC17-FW=
CHAPTER 1
Cisco 1700 Series Bundles Cisco 1700 Bundle: Firewall IPSec 3DES, Memory Cisco 1700 Bundle: VPN Module, Firewall IPSec 3DES, Memory Cisco 1700 Bundle: Firewall, Memory
Cisco 1751 Data Software Feature Packs for Cisco IOS Release 12.1.(5)YB
ROUTERS
CD17-C-12.1.5= CD17-C-12.1.5= CD17-C7P-12.1.5= CD17-C7K2-12.1.5= CD17-CH-12.1.5= CD17-B-12.1.5= CD17-B7HP-12.1.5= CD17-C7HK2-12.1.5= CD17-Q7HK2-12.1.5=
IP IP ADSL IP Plus ADSL IP Plus IPSec 3DES ADSL IP/FW/IDS IP/IPX IP/IPX/FW/IDS Plus ADSL IP/FW/IDS Plus IPSec 3DES ADSL IP/IPX/AT/IBM/FW/IDS Plus IPSec 3DES
Cisco 1751 Data/Voice Software Feature Packs for Cisco IOS Release 12.1.(5)YB CD17-C7VP-12.1.5= CD17-C7VP-12.1.5= CD17-C7HV-12.1.5= CD17-C7VK2-12.1.5= CD17-C7HVK2-12.1.5= CD17-Q7HVK2-12.1.5=
IP/Voice Plus IP/Voice Plus ADSL IP/Voice/FW/IDS Plus ADSL IP/Voice Plus IPSec 3DES ADSL IP/Voice/FW/IDS Plus IPSec 3DES ADSL IP/IPX/AT/IBM/FW/IDS/Voice Plus IPSec 3DES
Cisco 1700 Series Memory Options MEM-1700-8MFC= MEM-1700-16D= MEM-1700-32D=
Cisco 1700 Series, 8 MB Mini-Flash Card Cisco 1700 Series, 16 MB DRAM DIMM Cisco 1700 Series, 32 MB DRAM DIMM
Cisco 1700 Series WAN Interface Cards (WICs) WIC-1T WIC-2T WIC-2A/S WIC-1B-S/T WIC-1B-U WIC-1DSU-56K4 WIC-1DSU-T1 WIC-1ADSL= WIC-1ENET=
1-port Serial WAN Interface Card 2-port Serial WAN Interface Card 2-port Async/Sync Serial WAN Interface Card 1-port BRI (S/T) WAN Interface Card (dial and leased line) 1-port BRI w/ NT-1 WAN Interface Card (dial and leased line) 1-port 4-Wire 56/64 Kbps w/ (DSU/CSU) WAN Interface Card 1-port T1/Fr T1 w/ (DSU/CSU) WAN Interface Card 1-port ADSL WAN Interface Card 1-port Ethernet Interface Card
Cisco 1750 and 1751 Series Voice Interface Cards (for 1750 and 1751 only) VIC-2FXS VIC-2FXO VIC-2E/M VIC-2FXO-EU VIC-2FXO-M VIC-2BRI-NT/TE
2-port Voice Interface Card FXS 2-port Voice Interface Card FXO 2-port Voice Interface Card E&M 2-port Voice Interface Card FXO for Europe 32-port Voice Interface Card FXO for Australia 2-port Voice Interface Card—BRI (NT & TE)
Cisco 1700 Spares and Accessories PWR-1700-WW1= PVDM-4= PVDM-8=
Cisco 1700 AC Power Supply—worldwide 4-Channel Packet Voice/Fax DSP Module 8-Channel Packet Voice/Fax DSP Module
Cisco 1700 Series Basic Maintenance CON-SNT-PKG4 CON-SNT-PKG3 CON-SNT-PKG2
Cisco 1750-2V and 1750-4V SMARTnet Maintenance Cisco 1750 SMARTnet Maintenance Cisco 1720 SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 1700 Web site: http://www.cisco.com/go/1700
Cisco 1700 Series
1-17
Chapter 1
Routers
Cisco 2500 Series The Cisco 2500 series router has served for years as the most deployed and popular branch office router in the world, and provides low cost routing functionality for data-only applications (no voice support). There are four models to choose from, for simple, 1 or 2 Ethernet port/1 or 2 serial port requirements, or 1 Ethernet with 8 or 16 asynchronous ports, for aggregating multiple network elements to provide a single Telnet access point (telemetry application)—or for attaching 8 to 16 external analog or digital modems in environments where T1/E1 digital circuits are not available, but multiple dial-up telephone lines can be leveraged for low cost remote access. For higher performance requirements, where a wider variety of WAN/LAN interfaces are needed, as well as voice support, refer to Cisco 2600/3600 or 1700 series routers.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 2500 Series
• Data-only network requirement
Cisco 2501
• Multiprotocol routing between WANs and LANs • A single Ethernet LAN and dual serial ports
Cisco 2514
• Dual Ethernet & Serial ports for LAN segmentation or security/firewall partition (DMZ)
Cisco AS2509-RJ, AS2511-RJ
• An access server combining a terminal server, protocol translator, console port aggregator, and a router in a single device • One Ethernet LAN and dual serial ports • 8 or 16 asynchronous serial ports with RJ-11 jacks, ideal for attaching 8 to 16 external modems
Key Features • Proven technology with a full suite of Cisco IOS Software • Setup with Cisco ConfigMaker, a free tool for configuring a network of routers • With CiscoWorks for Windows, allows remote management and maintenance from a central location
Competitive Products • 3Com: SuperStack NETBuilder • IBM: 2210
• Nortel/Bay: Advanced Node (AN)
Specifications Cisco 2500 Series—All Models Feature
Specifications
Throughput Performance (pps)
3-5 Kpps (depending on configuration)
Memory
8-MB dual Flash bank option (default), 16 MB (max); 16 MB DRAM (default)
Power Supply
AC, with optional DC or redundant power supply (RPS)
Cisco 2500 Series
1-18
Chapter 1
Routers
Cisco 2500 Series—Single and Dual LAN Routers and Access Servers (fixed configurations) AS2509-RJ
AS2511-RJ
Cisco 2514
1-port Ethernet
1-port Ethernet
1-port Ethernet
2-port Ethernet
Fixed WAN Ports
2-port sync serial
1-port sync serial 8-port async
1-port sync serial 16-port async
2-port sync serial
Dimensions (HxWxD)
1.75 x 17.5 x 10.56 in.
1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in. 1.75 x 17.5 x 10.56 in.
ROUTERS
Cisco 2501
Fixed LAN Ports
CHAPTER 1
Feature
Cisco IOS Software and Memory To run the Cisco IOS software Feature Packs, you need the memory shown below: Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
CD25-C-12.0=
IP only
12.0(6) 12.0(5)T
8 MB 8 MB
4 MB 6 MB
CD25-CP-12.0=
IP Plus
12.0(6) 12.0(5)T
8 MB 16 MB
6 MB 8 MB
CD25-CHL-12.0=
IP/FW Plus IPSEC 56
12.0(6) 12.0(5)T
16 MB 16 MB
8 MB 10 MB
CD25-B-12.0=
IP/IPX/AT/DEC
12.0(6) 12.0(5)T
8 MB 8 MB
6 MB 8 MB
CD25-BP-12.0=
IP/IPX/AT/DEC Plus
12.0(6) 12.0(5)T
16 MB 16 MB
6 MB 8 MB
CD25-AP-12.0=
Enterprise Plus
12.0(6) 12.0(5)T
16 MB 16 MB
8 MB 10 MB
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn 2. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.
Selected Part Numbers and Ordering Information1 Cisco 2500 Series Router Chassis1 CISCO2501-CH CISCO2514-CH
1-port Ethernet AUI, 2-port Serial, IP s/w 2-port Ethernet AUI, 2-port Serial, IP s/w
Cisco 2500 Series Access Router Chassis CISCO2509-CH AS2509-RJ-CH CISCO2511-CH AS2511-RJ-CH
1-port Ethernet AUI, 2-port Serial, 8-port Async Serial, IP s/w 1-port Ethernet AUI (RJ-45), 1-port Serial, 8-port Async Serial, IP s/w 1-port Ethernet AUI, 2-port Serial, 16-port Async Serial, IP s/w 1-port Ethernet AUI (RJ-45), 1-port Serial, 16-port Async Serial, IP s/w
Cisco 2500 Series Memory Options MEM-1X4F= MEM-1X8F= MEM-1X8D= MEM-1X16D=
Cisco 2500 Series, 4 MB Flash Upgrade Cisco 2500 Series, 8 MB Flash Upgrade Cisco 2500 Series, 8 MB DRAM Upgrade Cisco 2500 Series, 16 MB DRAM Upgrade
Cisco 2500 Series Accessories ACS-2500RM-19= ACS-2500RM-24= ACS-2500ASYN= ACS-2500RPS=
Cisco 2500 Series, Rack-Mount Kit, 19 Inches Cisco 2500 Series, Rack-Mount Kit, 24 Inches Cisco 2500 AUX/Console Part Cable Kit Cisco 2500 Series, RPS Field Upgrade
Cisco 2500 Series Basic Maintenance CON-SNT-PKG4
Cisco 2500 Series (2501,2514) SMARTnet (8 x 5 x NBD)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 2500 Series Web site: http://www.cisco.com/go/2500 Cisco 2500 Series
1-19
Chapter 1
Routers
Cisco 2600 Series Cisco Systems extends enterprise and service provider-class versatility, integration, and power to branch offices with the Cisco 2600 series. Its modular architecture provides the flexibility to adapt to network technology changes as new services and applications become available. Driven by a powerful RISC processor, it supports advanced quality of service (QoS), security, and network integration. By combining the functions of multiple devices into a single unit, it reduces the complexity of managing remote networks. The Cisco 2600 series shares modular interfaces with the Cisco 1600, 1700, and 3600 series, providing a cost-effective solution for applications such as Internet/intranet access, multiservice voice/data integration, analog and digital dial access services, VPN access, DSL access, ATM access concentration, VLANs, and routing bandwidth management.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 2600 Series
• • • • • • •
Cisco 2651
• High performance CPU, two autosensing 10/100 Mbps Ethernet ports with VLAN support
Cisco 2650
• High performance CPU, one autosensing 10/100 Mbps Ethernet port with VLAN support
Cisco 2621
• Two autosensing 10/100 Mbps Ethernet ports with VLAN support
Cisco 2620
• One autosensing 10/100 Mbps Ethernet port with VLAN support
Cisco 2613
• One Token Ring port
Cisco 2612
• One Token Ring port and one Ethernet port for mixed LANs and migrating from Token Ring to Ethernet
Cisco 2611
• Two Ethernet ports for LAN segmentation or secure LAN isolation
Cisco 2610
• One Ethernet port
LAN to LAN and inter-VLAN routing, including bandwidth management Remote access server (analog and digital dial services) Multiservice voice/fax/data integration VPN/Extranet access with optional Firewall Security Serial device concentration Delivery of high-speed business class DSL access WAN access, including ATM services
Key Features • Versatility/investment protection—Field-upgradable modular interfaces enable thousands of customized solutions & easy migration to future requirements • Integration/manageability—Lowers cost of ownership and improves ease of remote management, providing integrated “branch-in-a-box” networking that combines CSU/DSUs, multiplexors, modems, voice/data gateways, ISDN NT1s, firewalls, VPNs, encryption, and compression devices • Multiservice voice/data networks—Reduces phone/fax costs between offices; using Cisco IOS software QoS features (such as RSVP, WFQ, CAR, and RED), voice/fax traffic is digitized and encapsulated in Frame Relay or IP packets and consolidated with data traffic • Enterprise/Provider class solution—Meets the requirements of multiservice enterprises and their managed service CPE providers with high reliability features, Multiple WAN connections, and the ability to migrate from dataonly to TDM voice and data to packetized voice and data infrastructure Cisco 2600 Series
1-20
Chapter 1
Routers
Competitive Products • Motorola: Vanguard 645x/643x • Nortel/Bay: Advanced Remote Node (ARN), Passport 4400 series
Specifications Cisco 2651 and Cisco 2650
Cisco 2621 and Cisco 2620
Throughput (max, 34-37K packets per second (pps) 23-25Kpps fast-switching) Fixed LAN Ports
2-port 10/100 Mbps Ethernet (Cisco 2651) 1-port 10/100 Mbps Ethernet (Cisco 2650)
2-port 10/100 Mbps Ethernet (Cisco 2621) 1-port 10/100 Mbps Ethernet (Cisco 2620)
Cisco 2613 and Cisco 2612
Cisco 2611 and Cisco 2610
12-15Kpps
12-15Kpps
1-port Token Ring (Cisco 2613) 1-port Ethernet and 1-port Token Ring (Cisco 2612)
2-port Ethernet (Cisco 2611) 1-port Ethernet (Cisco 2610)
Fixed WAN Ports 1-115.2 Kbps async only (aux port) Same as Cisco 2651 and Same as Cisco 2651 and Same as Cisco 2651 and Cisco 2650
Cisco 2650
Cisco 2650
Network Module 1 Slots
1
1
1
WAN Interface Card Slots
2
2
2
2
Advanced Integration Slots (AIM)
1
1
1
1
Multiflex Voice and WAN Interface Cards1
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Same as Cisco 2651 and Same as Cisco 2651 and Cisco 2650 Cisco 2650
WAN Modules
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Same as Cisco 2651 and Same as Cisco 2651 and Cisco 2650 Cisco 2650
ATM Modules
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Modem Modules 8- and 16-port analog
Same as Cisco 2613 and Cisco 2612
Same as Cisco 2651 and Same as Cisco 2651 and Same as Cisco 2651 and Cisco 2650 Cisco 2650 Cisco 2650
AIM Modules
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Same as Cisco 2621 and Same as Cisco 2621 and Cisco 2620 Cisco 2620
Processor
80-MHz (RISC)
50-MHz (RISC)
40-MHz (RISC)
40-MHz (RISC)
Flash Memory
8 MB (default) 32 MB (max)2
8 MB (default) 32 MB (max)2
8 MB (default) 16 MB (max)
8 MB (default) 16 MB (max)
DRAM Memory
32 MB (default) 128 MB (max)
32 MB (default) 64 MB (max)
32 MB (default) 64 MB (max)
32 MB (default) 64 MB (max)
Power Supply
AC, DC optional, redundant power Same as Cisco 2651 and Same as Cisco 2651 and Same as Cisco 2651 and (external unit) Cisco 2650 Cisco 2650 Cisco 2650
Dimensions (HxWxD)
1.69 x 17.5 x 11.8 in.
Same as Cisco 2651 and Same as Cisco 2651 and Same as Cisco 2651 and Cisco 2650 Cisco 2650 Cisco 2650
Cisco IOS Release(s) Supported
12.1.2T or later “T” releases
12.0.T, 12.1T, 12.1 mainline 11.3T, 12.0 mainline, 11.3T, 12.0 mainline, or later 12.0.T, 12.1T, 12.1 mainline 12.0.T, 12.1T, 12.1 mainline or later or later
Service Category 5
5
5
5
1. Packet Voice applications require the use of the high-density voice/fax network module. 2. 32MB Flash requires IOS Release 12.1.3T or higher for the Cisco 262x series
Cisco 2600 Series
1-21
ROUTERS
Feature
CHAPTER 1
• 3Com: SuperStack II NETBuilder SI and Pathbuilder S400 • Intel/Shiva: LanRover Family
Chapter 1
Routers
Cisco IOS Software and Memory Requirements1 Most Cisco IOS software CD feature packs for the Cisco 2600 series include several selected Cisco IOS releases. To run the latest Cisco IOS Software Feature Packs with version 12.0(7)XK, you need, at a minimum, the amount of memory shown in the following table. Some configurations will require more than the recommended minimum. Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
Cisco 2610, 2611, 2612, 2613, 2620, and 2621 CD26-C-12.0.7=
IP only
12.0(7)XK1
8 MB
24 MB
CD26-CP-12.0.7=
IP Plus
12.0(7)XK1
8 MB
40 MB
CD26-CH-12.0.7=
IP/Firewall
12.0(7)XK1
8 MB
32 MB
CD26-CHL-12.0.7=
IP/Firewall Plus IPSec 56
12.0(7)XK1
16 MB
48 MB
CD26-CHK2-12.0.7=
IP/Firewall Plus IPSec 3DES
12.0(7)XK1
16 MB
48 MB
CD26-CK2-12.0.7=
IP Plus IPSec 3DES
12.0(7)XK1
16 MB
40 MB
CD26-CL-12.0.7=
IP Plus IPSec 56
12.0(7)XK1
16 MB
40 MB
CD26-B-12.0.7=
IP/IPX/AT/DEC
12.0(7)XK1
8 MB
32 MB
CD26-BP-12.0.7=
IP/IPX/AT/DEC Plus
12.0(7)XK1
16 MB
40 MB
CD26-BHP-12.0.7=
IP/IPX/AT/DEC/Firewall Plus
12.0(7)XK1
16 MB
48 MB
CD26-AP-12.0.7=
Enterprise Plus
12.0(7)XK1
16 MB
48 MB
CD26-AL-12.0.7=
Enterprise Plus IPSec 56
12.0(7)XK1
16 MB
48 MB
CD26-AHK2-12.0.7=
Enterprise/Firewall Plus IPSec 3DES
12.0(7)XK1
16 MB
48 MB
CD26-AHL-12.0.7=
Enterprise/Firewall Plus IPSec 56
12.0(7)XK1
16 MB
48 MB
CD26-AK2-12.0.7=
Enterprise Plus IPSec 3DES
12.0(7)XK1
16 MB
48 MB
CD26-E-12.0.7=
Remote Access Server
12.0(7)XK1
8 MB
24 MB
CD265-C-12.0.7=
IP only
12.1(2)T
8 MB
24 MB
CD265-CP-12.0.7=
IP Plus
12.1(2)T
16 MB
40 MB
CD265-CH-12.0.7=
IP/Firewall
12.1(2)T
8 MB
32 MB
CD265-B-12.0.7=
IP/IPX/AT/DEC
12.1(2)T
8 MB
32 MB
CD265-BP-12.0.7=
IP/IPX/AT/DEC Plus
12.1(2)T
16 MB
40 MB
CD265-AP-12.0.7=
Enterprise Plus
12.1(2)T
16 MB
48 MB
Cisco 2650 and 26513
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn 2. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack. 3. The Cisco 2651 and Cisco 2650 will initially be supported with unique Cisco 265x-designated feature packs including Cisco IOS version 12.1.2T. These feature packs can be identified by part numbers starting CD265-xxxx-12.1.2. Coming soon, all Cisco 2600 series will be supported with Cisco IOS version 12.1.5(T) CD feature packs, for example, CD26-CP12.1.5=. There will be no Cisco 265x specific part numbers offered for this and future releases.
Selected Part Numbers and Ordering Information1 Cisco 2600 Series Router Chassis1 CISCO2610 CISCO2610-DC CISCO2610-RPS CISCO2611 CISCO2611-DC CISCO2611-RPS CISCO2612 CISCO2612-DC
1-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 1-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, DC power supply, IP s/w 1-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w 2-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 2-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, DC power supply, IP s/w 2-port 10BASE-T, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w 1-port 10BASE-T, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 1-port 10BASE-T, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w
Cisco 2600 Series
1-22
Chapter 1
Cisco 2600 Series LAN Modules NM-1E= NM-4E=
1-port 10BASE-T network module 4-port 10BASE-T network module
Cisco 2600 and 3600 Series WAN Interface Cards (WICs) WIC-1B-S/T= WIC-1B-U= WIC-1DSU-56K4= WIC-1DSU-T1= WIC-1T= WIC-2T= WIC-2A/S= WIC-1ADSL=
1-port BRI (S/T) WAN Interface Card (Dial and Leased Line) 1-port BRI (U) w/NT-1 WAN Interface Card (Dial and Leased Line) 1-port Serial W/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card 1-port Serial w/ FrT1/T1 DSU/CSU WAN Interface Card 1-port Serial WAN Interface Card 2-port Serial WAN Interface Card 2-port Async/Sync Serial WAN Interface Card 1-port ADSL WAN Interface Card
Cisco 2600 and 3600 Series Multiflex Voice and WAN Interface Cards2 VWIC-1MFT-T1= VWIC-2MFT-T1= VWIC-2MFT-T1-DI= VWIC-1MFT-E1= VWIC-2MFT-E1= VWIC-2MFT-E1-DI=
1-port RJ-48 Multiflex Trunk—T1 2-port RJ-48 Multiflex Trunk—T1 2-port RJ-48 Multiflex Trunk—T1 With Drop and Insert 1-port RJ-48 Multiflex Trunk—E1 2-port RJ-48 Multiflex Trunk—E1 2-port RJ-48 Multiflex Trunk—E1 With Drop and Insert
Cisco 2600 and 3600 Series Voice/Fax Network Modules NM-1V= NM-2V= NM-HDV-1T1-24= NM-HDV-1T1-24E= NM-HDV-2T1-48= NM-HDV-1E1-30= NM-HDV-1E1-30E= NM-HDV-2E1-60= NM-HDV=
1-slot voice/fax network module 2-slot voice/fax network module 1-port T1 24 channel voice/fax network module 1-port T1 24 enhanced channel voice/fax network module 2-port T1 48 channel voice/fax network module 1-port E1 30 channel voice/fax network module 1-port E1 30 enhanced channel voice/fax network module 2-port E1 60 channel voice/fax network module High density voice network module, spare (no T1/E1 or DSPs)
Cisco 2600 and 3600 Series ATM Modules NM-4T1-IMA= NM-4E1-IMA= NM-8T1-IMA= NM-8E1-IMA=
4-port T1 ATM network module with IMA 4-port E1 ATM network module with IMA 8-port T1 ATM network module with IMA 8-port E1 ATM network module with IMA
Cisco 2600 and 3600 Series High-Density Voice/Fax DSP Upgrade Modules PVDM-12=
12-channel Packet Voice/Fax DSP Module
Cisco 2600 and 3600 Series Voice Interface Cards (VICs) VIC-2E/M= VIC-2FXO= VIC-2FXS= VIC-2FX0-EU= VIC-2FXO-M3= VIC-2BRI-S/T-TE= VIC-2FXO-M1= VIC-2FXO-M2=
2-port E&M Voice Interface Card 2-port FXO Voice Interface Card 2-port FXS Voice Interface Card 2-port FXO Voice Interface Card (for Europe) 2-port FXO Voice Interface Card (for Australia) 2-port BRI (S/T user side) Voice Interface Card 2-port Voice Interface Card—FXO w/ Reversal (for US+) 2-port Voice Interface Card—FXO w/ Reversal (for EU)
Cisco 2600 and 3600 Series WAN Network Modules NM-4B-S/T
4-port BRI (S/T) network module
Cisco 2600 Series
1-23
ROUTERS
1-port 10BASE-T, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w 1-port Token Ring, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 1-port Token Ring, 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w 1-port Token Ring, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w 1-port 10/100, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 1-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w 1-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w 2-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w 2-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w 2-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w High Performance 10/100 Modular Router w/ Cisco IOS IP s/w High Performance 10/100 Modular Router w/ Cisco IOS IP s/w—DC NEBs High Performance 10/100 Modular Router w/ Cisco IOS IP s/w—RPS High Performance Dual 10/100 Modular Router w/ Cisco IOS IP High Performance Dual 10/100 Modular Router w/ Cisco IOS IP- DC NEBs High Performance Dual 10/100 Modular Router w/ Cisco IOS IP- RPS
CHAPTER 1
CISCO2612-RPS CISCO2613 CISCO2613-DC CISCO2613-RPS CISCO2620 CISCO2620-DC CISCO2620-RPS CISCO2621 CISCO2621-DC CISCO2621-RPS CISCO2650 CISCO2650-DC CISCO2650-RPS CISCO2651 CISCO2651-DC CISCO2651-RPS
Routers
Chapter 1
NM-8B-S/T NM-4B-U NM-8B-U NM-4A/S= NM-8A/S= NM-16A= NM-32A= NM-1CT1 NM-2CT1 NM-1CT1-CSU NM-2CT1-CSU NM-1ATM-25
Routers
8-port BRI (S/T) network module 4-port BRI (U) w/ NT1 network module 8-port BRI (U) w/ NT1 network module 4-port Async/Sync Serial network module 8-port Async/Sync Serial network module 16-port Async Serial network module 32-port Async Serial network module 1-port Channelized T1/ISDN-PRI network module 2-port Channelized T1/ISDN-PRI network module 1-port Channelized T1/ISDN-PRI w/ CSU network module 2-port Channelized T1/ISDN-PRI w/ CSU network module 1-port ATM 25 network module
Cisco 2600 and 3600 Series Modem Network Modules NM-8AM= NM-16AM=
8-port Analog Modem network module 16-port Analog Modem network module
Cisco 2600 and 3600 Series Network Modules (International) NM-1CE1B= NM-1CE1U= NM-2CE1B= NM-2CE1U=
1-port Channelized E1/ISDN-PRI balanced network module 1-port Channelized E1/ISDN-PRI unbalanced network module 2-port Channelized E1/ISDN-PRI balanced network module 2-port Channelized E1/ISDN-PRI unbalanced network module
Cisco 2600 and 3600 Series Modem Management Technology Licenses (MMTL)3 MMTL-3600/2600-8= MMTL-3600/2600-16=
MMTL for 8 Analog Modems MMTL for 16 Analog Modems
Cisco 2600 Series Memory Options MEM2600-8FS= MEM2600-16FS= MEM2620-32FSBOOT= MEM2650-32FS= MEM2600-4D= MEM2600-8D= MEM2600-16D= MEM2600-32D= MEM2600-24U32D= MEM2600-24U48D= MEM2650-8D= MEM2650-16D= MEM2650-32D= MEM2650-64D= MEM2650-32FS= MEM2650-8U32FS=
Cisco 2600 Series, 8MB Flash SIMM Cisco 2600 Series, 16MB Flash SIMM Cisco 262x Series, 32 MB Flash SIMM and BOOTROM4 32 MB Flash SIMM for the Cisco 265x only Cisco 2600 Series, 4 MB DRAM DIMM Cisco 2600 Series, 8 MB DRAM DIMM Cisco 2600 Series, 16 MB DRAM DIMM Cisco 2600 Series, 32 MB DRAM DIMM Cisco 2600 Series, 24 to 32 MB DRAM Upgrade Cisco 2600 Series, 24 to 48 MB DRAM Upgrade 8 MB DRAM DIMM for the Cisco 265x only 1 6 MB DRAM DIMM for the Cisco 265x only 32 MB DRAM DIMM for the Cisco 265x only 64 MB DRAM DIMM for the Cisco 265x only 32 MB Flash SIMM for the Cisco 265x only 8 to 32 MB Flash SIMM Upgrade for the Cisco265x only
Cisco 2600 Series Advanced Integration Modules AIM-COMPR2= AIM-VPN/BP=
Data Compression AIM for the Cisco 2600 series DES/3DES VPN Encryption AIM for 2600-Base Performance
Cisco 2600 Series Accessories ACS-2600RM-19= ACS-2600RM-24= ACS-2600ASYN= PWR-2600-AC= ACS-2600RPS= WIC-BLANK-PANEL=
Cisco 2600 Series, 19-Inch Rack Mount Kit Cisco 2600 Series, 23/24-Inch Rack Mount Kit Cisco 2600 Series, Auxiliary and Console Port Cable Kit Cisco 2600 Series, AC power supply, spare (also available in DC) Cisco 2600 Series, RPS adapter—Field Upgrade Blank WAN Interface Card (WIC) Panel
Cisco 2600 Series Basic Maintenance CON-SNT-PKG5
Cisco 2600 Series SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. VoIP and VoFR require use of a Voice/Fax network module 3. Requires Plus feature pack 4. Requires IOS Release 12.1.3(T) or higher
For More Information See the Cisco 2600 Series Web site: http://www.cisco.com/go/2600 Cisco 2600 Series
1-24
Chapter 1
Routers
Cisco 3600 Series
Sell This Product
When a Customer Needs These Features
Cisco 3620
• • • • •
Medium-density WAN and dialup connectivity Medium-density LAN connectivity Low-density Voice over Data Low-density ATM connections Mid-density modem-over-PRI bundles
Cisco 3640
• • • • •
High-density WAN and dialup connectivity Medium- to high-density LAN connectivity Mid-density Voice over Data Low- to mid-density ATM connections Low-density modem-over-BRI bundles
Cisco 3660
• • • • •
Very high-density WAN and dialup connectivity High-density LAN connectivity Mid-density Voice over Data Mid-density ATM connections Mid- to high-density modem-over-PRI and BRI connectivity
Key Features • Combines dial access, advanced LAN-to-LAN routing services, ATM connectivity, and multiservice integration of voice, video, and data in a single platform • Modular, scalable design provides performance, scalability, flexibility, and investment protection • High-density ISDN PRI capabilities • Preconfigured BRI and PRI modem bundles available • Support for modem-over-BRI functionality • Integrated Cisco IOS software (base price includes IP IOS software) • Full VPN and Firewall support
Cisco 3600 Series
1-25
ROUTERS
When to Sell
CHAPTER 1
The Cisco 3600 Series is a family of modular, high-performance multiservice access routers for medium and large-sized branch offices and Internet service providers. With over 90 modular interface options (shares modular interfaces with the 2600 series), the Cisco 3600 Series provides solutions for voice/data integration, virtual private networks (VPNs), dial access, and multiprotocol data routing. Using Cisco’s digital and analog voice/fax network modules, the Cisco 3600 Series allows customers to consolidate voice, fax, and data traffic on a single network. Its architecture protects customers’ investment in network technology and integrates the functions of several devices into a single, manageable solution. Cisco 3600 Dial Bundles are also available to also address specific dial-up remote access server requirements.
Chapter 1
Routers
Competitive Products • 3Com: NETBuilder II and Netserver I-Modem • IBM: 2212 • Intel/Shiva: Lanrover series
• Livingston/Lucent: Portmaster 2E/2ER • Nortel/Bay: ASN, ARN, and 540
Specifications Feature
Cisco 3620
Cisco 3640
Cisco 3660
Fixed Ports
None
None
1 or 2 10/100 Fast Ethernet
Network Module Slots
2
4
6
Advanced Integration Module (AIM) Slots
None
None
2
LAN/Combo Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
WAN Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620 (Hardware compression support only through AIM-COMPR4)
ATM Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
Voice/Fax Network Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
WAN Interface Card (WIC) Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
Multiflex Voice/WAN Interface Cards
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
Voice Interface Card (VIC) Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
Modem Modules
See Part Numbers and Ordering Information
Same as Cisco 3620
Same as Cisco 3620
Performance
40 kpps
50-70 kpps
100-120 kpps
Flash Memory
8 MB (default); 32 MB (max)
Same as Cisco 3620
8 MB (default); 64 MB (max)
DRAM Memory
32 MB (default) 64 MB (max)
32 MB (default) 128 MB (max)
32 MB SDRAM (default) 256 MB SDRAM (max)
Power Supply
AC, DC optional
AC, DC optional
Single or dual AC/DC
Dimensions (HxWxD)
1.75 x 17.5 x 13.5 in.
3.44 x 17.5 x 15 in.
8.7 x 17.5 x 11.8 in.
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Feature Packs, you need the following amount of memory: Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
CD36-C-12.0.7=
IP only
12.0(7)XK
8 MB
32 MB
CD36-CP-12.0.7=
IP Plus
12.0(7)XK
16 MB
48 MB
CD36-CH-12.0.7=
IP/FW
12.0(7)XK
8 MB
32 MB
CD36-CHL-12.0.7=
IP/FW Plus IPSec 56
12.0(7)XK
16 MB
64 MB
CD36-CHK2-12.0.7=
IP/FW Plus IPSec 3DES
12.0(7)XK
16 MB
64 MB
CD36-CK2-12.0.7=
IP/ Plus IPSec 3DES
12.0(7)XK
16 MB
48 MB
CD36-CL-12.0.7=
IP Plus IPSec 56
12.0(7)XK
16 MB
48 MB
CD36-B-12.0.7=
IP/IPX/AppleTalk/DECnet
12.0(7)XK
8 MB
32 MB
Cisco 3620 and 3640
CD36-BP-12.0.7=
IP/IPX/AppleTalk/DECnet Plus
12.0(7)XK
16 MB
48 MB
CD36-BHP-12.0.7=
IP/IPX/AT/DEC/FW Plus
12.0(7)XK
16 MB
64 MB
CD36-AP-12.0.7=
Enterprise Plus
12.0(7)XK
16 MB
64 MB
Cisco 3600 Series
1-26
Chapter 1
Routers
Feature Pack Description
IOS Image Release
Flash Memory Required2
DRAM Memory Required
Enterprise Plus IPSec 56
12.0(7)XK
16 MB
64 MB
CD36-AHK2-12.0.7=
Enterprise/FW Plus IPSec 3DES
12.0(7)XK
16 MB
64 MB
CD36-AHL-12.0.7=
Enterprise/FW Plus IPSec 56
12.0(7)XK
16 MB
64 MB
CD36-C-12.0.7=
IP only
12.0(7)XK
8 MB
32 MB SDRAM
CD36-CP-12.0.7=
IP Plus
12.0(7)XK
16 MB
64 MB SDRAM
CD36-CH-12.0.7=
IP/FW
12.0(7)XK
8 MB
64 MB SDRAM
CD36-CHL-12.0.7=
IP/FW Plus IPSec 56
12.0(7)XK
16 MB
64 MB SDRAM
CD36-CHK2-12.0.7=
IP/FW Plus IPSec 3DES
12.0(7)XK
16 MB
64 MB SDRAM
CD36-CK2-12.0.7=
IP/ Plus IPSec 3DES
12.0(7)XK
16 MB
64 MB SDRAM
CD36-CL-12.0.7=
IP Plus IPSec 56
12.0(7)XK
16 MB
64 MB SDRAM
CD36-B-12.0.7=
IP/IPX/AppleTalk/DECnet
12.0(7)XK
8 MB
64 MB SDRAM
Cisco 3660
CD36-BP-12.0.7=
IP/IPX/AppleTalk/DECnet Plus
12.0(7)XK
16 MB
64 MB SDRAM
CD36-BHP-12.0.7=
IP/IPX/AT/DEC/FW Plus
12.0(7)XK
16 MB
64 MB SDRAM
CD36-AP-12.0.7=
Enterprise Plus
12.0(7)XK
16 MB
64 MB SDRAM
CD36-AL-12.0.7=
Enterprise Plus IPSec 56
12.0(7)XK
16 MB
64 MB SDRAM
CD36-AHK2-12.0.7=
Enterprise/FW Plus IPSec 3DES
12.0(7)XK
16 MB
64 MB SDRAM
CD36-AHL-12.0.7=
Enterprise/FW Plus IPSec 56
12.0(7)XK
16 MB
64 MB SDRAM
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn 2. Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.
Selected Part Numbers and Ordering Information1 Cisco 3600 Series Router Chassis1 CISCO3620 CISCO3620-DC CISCO3620-RPS CISCO3640 CISCO3640-DC CISCO3640-RPS CISCO3661-DC CISCO3661-AC CISCO3662-DC CISCO3662-AC
2-slot Modular Router-AC Power Supply, IP s/w 2-slot Modular Router-DC Power Supply, IP s/w 2-slot Modular Router, w/ RPS, IP s/w 4-slot Modular Router-AC Power Supply, IP s/w 4-slot Modular Router-DC Power Supply, IP s/w 4-slot Modular Router, w/ RPS, IP s/w 10/100 E Cisco 3660 6-slot Modular Router-DC with IP SW 10/100 E Cisco 3660 6-slot Modular Router-AC with IP SW Dual 10/100 E Cisco 3660 6-slot Modular Router-DC with IP SW Dual 10/100 E Cisco 3660 6-slot Modular Router-AC with IP SW
Cisco 3600 Series Bundles 3640MBUNDLE-4B-S/T 3640MBUNDLE-4B-U 3640MBUNDLE-8B-S/T 3640MBUNDLE-8B-U 3620MBUNDLE-24DM AS3640-T1-48DM AS3640-E1-60DM
3640 BRI Dial bundle. Includes 1E2W,12DM, 4 BRI-S/T, IP IOS 3640 BRI Dial bundle. Includes 1E2W,12DM, 4 BRI-U, IP IOS 3640 BRI Dial bundle. Includes 1E2W,18DM, 8 BRI-S/T, IP IOS 3640 BRI Dial bundle. Includes 1E2W,18DM, 8 BRI-U, IP IOS 3620 PRI Dial bundle. Includes 1FE2CT1-CSU, 24DM, IP IOS 3600 Access Concentrator, 48 MICA Modems, 2 PRI/T1, Ethernet, IP IOS 3600 Access Concentrator, 60 MICA Modems, Ethernet, IP IOS, no PRI
Cisco 2600 and 3600 Series ATM Modules2 Cisco 2600 and 3600 Series WAN Interface Cards (WICs)2 Cisco 2600 and 3600 Series Multiflex Voice/WAN Interface Cards2 Cisco 2600 and 3600 Series Voice/Fax Network Modules2 Cisco 2600 and 3600 Series High-Density Voice/Fax DSP Upgrade Modules2 Cisco 2600 and 3600 Series Network Modules (International)2 Cisco 3600 Series LAN/Combo Network Modules NM-1E= NM-4E= NM-1FE-TX= NM-1FE-FX=
1-port 10BASE-T Network Module 4-port 10BASE-T Network Module 1-port 100BASE-TX Network Module 1-port 100BASE-FX Network Module
Cisco 3600 Series
1-27
ROUTERS
CD36-AL-12.0.7=
CHAPTER 1
Distribution1 Part Number
Chapter 1
NM-1E2W= NM-2E2W= NM-1E1R2W= NM-1FE1CT1= NM-1FE1CT1-CSU= NM-1FE1CE1B= NM-1FE1CE1U= NM-1FE2CT1= NM-1FE2CT1-CSU= NM-1FE2CE1B= NM-1FE2CE1U= NM-1FE2W= NM-2FE2W= NM-1FE1R2W= NM-2W=
1-port 10BASE-T, 2 WIC Slots Network Module 2-port 10BASE-T, 2 WIC Slots Network Module 1-port 10BASE-T, 1-port Token Ring, 2 WIC Slots Network Module 1-port 100BASE-TX, 1-port Channelized T1/ISDN-PRI Network Module 1-port 100BASE-TX, 1-port Channelized T1/ISDN-PRI with CSU Network Module 1-port 100BASE-TX, 1-port Channelized E1/ISDN-PRI (Balanced) Network Module 1-port 100BASE-TX, 1-port Channelized E1/ISDN-PRI (Unbalanced) Network Module 1-port 100BASE-TX, 2-port Channelized T1/ISDN-PRI Network Module 1-port 100BASE-TX, 2-port Channelized T1/ISDN-PRI with CSU Network Module 1-port 100BASE-TX, 2-port Channelized E1/ISDN-PRI (Balanced) Network Module 1-port 100BASE-TX, 2-port Channelized E1/ISDN-PRI (Unbalanced) Network Module 1-port 10/100 Ethernet, 2 WIC Slots Network Module 2-port 10/100 Ethernet, 2 WIC Slots Network Module 1-port 10/100 Ethernet, 1-port Token Ring, 2 WIC Slots Network Module 2 WIC Slots Network Module
Cisco 3600 Series Voice Interface (VIC) Cards VIC-2E/M= VIC-2FXO= VIC-2FXS= VIC-2BRI-S/T-TE= VIC-2DID= VIC-2FXO-EU=
2-port Voice Interface Card—E&M 2-port Voice Interface Card—FXO 2-port Voice Interface Card—FXS 2-port Voice Interface Card—BRI (S/T user side) 2-port Voice Interface Card—Direct Inward Dial (DID) 2-port Voice Interface Card—FXO (for Europe)
Cisco 3600 Series WAN Modules NM-4B-S/T= NM-8B-S/T= NM-4B-U= NM-8B-U= NM-4T= NM-4A/S= NM-8A/S= NM-16A= NM-32A= NM-1CT1= NM-1CT1-CSU= NM-2CT1= NM-2CT1-CSU= NM-1HSSI= NM-COMPR= NM-VPN/MP=
4-port BRI (S/T) Module 8-port BRI (S/T) Module 4-port BRI (U) w/ NT-1 Module 8-port BRI (U) w/ NT-1 Module 4-port Serial Module 4-port Async/Sync Serial Module 8-port Async/Sync Serial Module 16-port Async Module 32-port Async Module 1-port Channelized T1/ISDN-PRI Module 1-port Channelized T1/ISDN-PRI w/ CSU Module 2-port Channelized T1/ISDN-PRI Module 2-port Channelized T1/ISDN-PRI w/ CSU Module 1-port HSSI Module Compression Module DES/3DES VPN Encryption NM for the 3620/3640 Mid-Platform
Cisco 3660 AIM Modules AIM-VPN/HP= AIM-COMPR4=
DES/3DES VPN Encryption AIM for 3660 High Performance Data Compression AIM for the 3600 series
Cisco 3620/40 VPN Module NM-VPN/MP=
DES/3DES VPN Encryption NM for 3620/3640 Mid Performance
Cisco 3600 Series Modem Modules NM-6DM= NM-8AM= NM-12DM= NM-16AM= NM-18DM= NM-24DM= NM-30DM= MICA-6MOD=
6-port Digital Modem Module 8-port Analog Modem Module 12-port Digital Modem Module 16-port Analog Modem Module 18-port Digital Modem Module 24-port Digital Modem Module 30-port Digital Modem Module 6-port Digital Modem Module (Spare)
Cisco 3600 Series Modem Management Technology Licenses3 MMTL-3600-6= MMTL-3600-12= MMTL-3600-18= MMTL-3600-24= MMTL-3600-30= MMTL-3600/2600-8= MMTL-3600/2600-16=
Modem Management Technology License (6 modems) Modem Management Technology License (12 modems) Modem Management Technology License (18 modems) Modem Management Technology License (24 modems) Modem Management Technology License (30 modems) Modem Management Technology License (for 8 Analog Modems) Modem Management Technology License (for 16 Analog Modems)
Cisco 3600 Series Memory Options MEM3600-4FC=
Cisco 3600 Series 4 MB Flash PCMCIA Card
Cisco 3600 Series
1-28
Routers
Chapter 1
Routers
Cisco 3600 Series 8 MB Flash PCMCIA Card Cisco 3600 Series 16MB Flash Card Cisco 3600 Series 4 MB Flash Cisco 3600 Series 8 MB Flash Cisco 3600 Series 16 MB Flash Cisco 3600, 16 MB Flash (2x8 MB Flash SIMMs) Cisco 3600, 32 MB Flash (2x16 MB Flash SIMMs) Cisco 3620, 4 MB DRAM SIMM Cisco 3620, 8 MB DRAM SIMM Cisco 3620, 16 MB DRAM SIMM Cisco 3640, 8 MB DRAM (2x4 MB DRAM SIMMs) Cisco 3640, 16 MB DRAM (2x8 MB DRAM SIMMs) Cisco 3640, 32 MB DRAM (2x16 MB DRAM SIMMs) Cisco 3640, 64 MB DRAM (2x32MB DRAM SIMMs) Cisco 3640, 128 MB DRAM (4x32MB DRAM SIMMs) Cisco 3660, 32 MB SDRAM Field Upgrade Cisco 3660, 128 MB SDRAM Field Upgrade Cisco 3660, 128 MB SDRAM (2x64 MB Flash DIMMs) Cisco 3660, 256 MB Flash (2x128 MB Flash DIMMs) Boot ROM Upgrade for Cisco 3600
CHAPTER 1 ROUTERS
MEM3600-8FC= MEM3600-16FC= MEM3600-4FS= MEM3600-8FS= MEM3600-16FS= MEM3600-2X8FS= MEM3600-2X16FS= MEM3620-4D= MEM3620-8D= MEM3620-16D= MEM3640-2X4D= MEM3640-2X8D= MEM3640-2X16D= MEM3640-2X32D= MEM3640-4X32D= MEM3660-32D= MEM3660-128D= MEM3660-2X64D= MEM3660-2X128D= BOOT-3600=
Cisco 3600 Series Accessories ACS-3620RM-19= ACS-3620RM-24= PWR-3620-AC PWR-3620-DC ACS-3620RPS= ACS-3640RM-19= ACS-3640RM-24= PWR-3640-AC PWR-3640-DC ACS-3640RPS= NM-BLANK-PANEL= WIC-BLANK-PANEL= ACS-3660RM-23 PWR-3660-AC PWR-3660-DC
Cisco 3620—19-Inch Rack Mount Kit Cisco 3620—24-Inch Rack Mount Kit Cisco 3620—AC Power Supply Cisco 3620—DC Power Supply Cisco 3620—RPS Field Upgrade Cisco 3640—19-Inch Rack Mount Kit Cisco 3640—24-Inch Rack Mount Kit Cisco 3640—AC Power Supply Cisco 3640—DC Power Supply Cisco 3640—RPS Field Upgrade Blank Network Module Panel Blank WAN Interface Card Panel 23 inch Rack Mount Kit for the Cisco 3660 AC Power Supply for Cisco 3660 DC Power Supply for Cisco 3660
Cisco 3600 Series Basic Maintenance CON-SNT-PKG7 CON-SNT-PKG10 CON-SNT-PKG14 CON-SNT-PKG15
Cisco 3620 SMARTnet Maintenance Cisco 3640 SMARTnet Maintenance Cisco 3661 SMARTnet Maintenance Cisco 3662 SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. The ATM Modules, WAN Interface Card (WIC) Modules, Multiflex Voice/WAN Interface Cards, Voice/Fax Network Modules, High-Density Voice/Fax DSP Upgrade Modules, and Network Modules (International) for the 3600 series are the same as those for the 2600 series. Please see page 1-23 for part numbers. 3. Requires Plus feature pack.
For More Information See the Cisco 3600 Series Web site: http://www.cisco.com/go/3600
Cisco 3600 Series
1-29
Chapter 1
Routers
Cisco 7200 Series The Cisco 7200 series routers deliver exceptional price/performance, versatility, and feature-richness in a compact form factor. The Cisco 7200 is ideal as a WAN aggregator for the Service Provider (micro-POP) or enterprise edge, an enterprise WAN gateway, a high-end managed CPE, or as a small core router. The platform also supports sites that require IBM data center connectivity as well as sites that require multifunction capabilities that combine all the above for multiservice voice, video, and data traffic. A key strength of the Cisco 7200 is its modularity. With a choice of 4- and 6-slot chassis, a selection of processors providing up to 400 kpps, an extensive range of LAN and WAN interfaces with up to 48 ports, and single or dual power supplies, the customer can customize their system to acheieve the performance, connectivity, and capacity desired. This modularity also provides investment protection and a guaranteed expansion path, allowing the customer to upgrade their Cisco 7200 as their networks needs to expand.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 7204VXR
• • • •
Cisco 7206
• 6-slot chassis • 225 kpps (NPE-225)
Cisco 7206VXR
• • • •
4-slot chassis 225, 300, 400 kpps (NPE-225, NPE-300, or NPE-400) or accelerated services (NSE-1) Higher backplane bandwidth MIX-enabled bus for multiservice/voice applications
6-slot chassis, higher performance than 7206 non-VXR version 225, 300, 400 kpps (NPE-225, NPE-300 or NPE-400), or accelerated services (NSE-1) Higher backplane bandwidth MIX-enabled bus for multiservice/voice applications
Key Features • Compact—Up to six port adapters in a 3RU form factor. Rack Density System allows for up to nine Cisco 7206s per rack with front to back airflow. • Performance/Price—Supports high-speed media and high-density configurations at a competitive price point; with its RISC-based and SRAMor SDRAM-configured system processors, the Cisco 7200 can switch up to 400,000 packets per second. Parallel Express Forwarding (PXF) technology allows the NSE-1 to harware accelerate features without performance degradation. • Feature Rich—Full support for Cisco IOS software and enhancements for high-performance network services. The Cisco 7200 offers industry-leading network services including MPLS, broadband aggregation, quality of service, security, multiservice, and encryption. • Connectivity/Flexibility—Provides high port density and an extensive range of LAN and WAN media, dramatically reducing the cost per port and allowing flexible configuration for ease of deployment. Cisco 7200 Series
1-30
Chapter 1
Routers
• 3Com: NETBuilder II • Nortel/Bay: Backbone Link Node (BLN) • Packeteer: PacketShaper 4000
ROUTERS
Competitive Products • Sentient: Ultimate 1000 • Nortel: Shasta • Redback: SMS 500 & 1800
Specifications Feature
Cisco 7204VXR
Cisco 7206
Cisco 7206VXR
Fixed Ports
None
None
None
Modular Slots
4
6
6
LAN Port Adapters
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Same as 7204VXR
Serial Port Adapters
See Part Numbers and Ordering Information
Same as 7204VXR
Same as 7204VXR
High Speed Serial Port See Part Numbers and Ordering Information Adapters
Same as 7204VXR
Same as 7204VXR
Multichannel and ISDN See Part Numbers and Ordering Information Port Adapters
See Part Numbers and Ordering Information
Same as 7204VXR
Digital Voice Trunk Port See Part Numbers and Ordering Information Adapter
Same as 7204VXR
Same as 7204VXR
SONET Port Adapters
See Part Numbers and Ordering Information
Same as 7204VXR
Same as 7204VXR
ATM Port Adapters
See Part Numbers and Ordering Information
Same as 7204VXR
Same as 7204VXR
Mainframe Channel Connection Port Adapters
FE, 2FE/E, and GE + E
FE
FE, 2FE/E, and GE + E
Service Adapter Modules Encryption
Compression and Encryption
Encryption
Throughput Performance Up to 400,000 pps (depending on configuration) (pps)
Up to 200,000 pps (depending on configuration)
Up to 400,000 pps (depending on config)
NPE-225
NPE-400, NSE-1, NPE-300, NPE-225
128 MB (max)
20 MB (default) 128 MB (max)
20 MB (default) 128 MB (max)
DRAM Memory
128 MB (NPE-400 default) 512 MB (max)
128 MB (NPE-225 default) 128 MB (max)
128 MB (NPE-400 default) 512 MB (max)
Power Supply
AC or DC, dual optional
AC or DC, dual optional
AC or DC, dual optional
Dimensions (HxWxD)
5.25 x 16.8 x 17 in.
5.25 x 16.8 x 17 in.
5.25 x 16.8 x 17 in.
NPE-400, NSE-1, NPE-300, NPE-225
Network Processing Engines
Flash PCMCIA Memory 20 MB (default)
CHAPTER 1
• Common port adapters—Uses the same port adapters as the Cisco 7500 Versatile Interface Processor (VIP), 7600 FlexWAN Module, 7100, and 7400, which simplifies stocking spares and protects customer investment in interfaces.
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Feature Packs, you need, at a minimum, the amount of memory shown in the following table. Some configurations will require more. Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required
DRAM Memory Required
CD72-C-12.1T=
IP
12.1T
16MB
64MB
CD72-CK2-12.1E=
IP IPSEC 3DES
12.1E
16MB
64MB
CD72-CHK2-12.1T=
IP/FW/IDS IPSEC 3DES
12.1T
16MB
64MB
CD72-A-12.1T=
Enterprise
12.1T
16MB
64MB
Cisco 7200 Series
1-31
Chapter 1
Routers
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn
Selected Part Numbers and Ordering Information1 Cisco 7200 Series Base Chassis, NPE, and I/O Controller1 CISCO7204VXR CISCO7206VXR CISCO7204VXR/225 7204VXR/VOICE CISCO7204VXR-TP CISCO7206VXR/400/2FE C7206VXR/VOICE/400 CISCO7206VXR/NSE-1 CISCO7206 NPE-225= NPE-300= NPE-400= NSE-1=
Cisco 7204VXR, 4-slot chassis, 1 AC Supply Cisco 7206VXR, 6-slot chassis, 1 AC Supply 7204VXR Bundle with NPE-225, and I/O Controller with FE 7204VXR w/ NPE-225, Voice PA (12 DSPs), I/O controller w/ FE CISCO7204VXR for Bundling Solutions 7206VXR with NPE-400 and I/O Controller with 2 FE/E Ports 7206VXR w/ NPE-400, Voice PA (30 DSP), I/O controller w/ 2FE 7206VXR Bundle with NSE-1 and I/O Controller with 2 FE/E Cisco 7206, 6-slot chassis, AC Power Cisco 7200 Network Processing Engine, 225 kbps Cisco 7200VXR Network Processing Engine, 300 kbps Cisco 7200VXR Network Processing Engine, 400 kbps Cisco 7200VXR Network Services Engine, 300 kbps plus PXF
Cisco 7200 Series License for Advanced Software Options FR-WPP72= FR-IR72= FR-BUS72=
Cisco IOS 7200 Series WAN Packet Protocols/Netflow License Cisco IOS 7200 Series InterDomain Routing/MPLS License Cisco IOS 7200 Series Broadband User Services Feature License
Cisco 7200 and 7500 Series Port Adapters PA-4E= PA-8E= PA-5EFL= PA-12E/2FE= PA-FE-TX= PA-FE-FX= PA-2FE-TX= PA-2FE-FX= PA-FE= PA-4C-E= PA-F/FD-MM=2 PA-F/FD-SM=2 PA-4R-DTR= PA-H= PA-2H= PA-A2-4E1XC-OC3SM= PA-A2-4E1XC-E3ATM= PA-A1-OC3SM PA-A1-OC3MM= PA-A2-4T1C-OC3SM= PA-A2-4T1C-T3ATM= PA-A3-8E1IMA PA-A3-8T1IMA PA-A3-E3= PA-A3-T3= PA-A3-OC3MM= PA-A3-OC3SMI= PA-A3-OC3SML= PA-A3-OC3MM-IPP= PA-4B-U= PA-8B-S/T= PA-4T+= PA-8T-V35= PA-8T-232= PA-8T-X21= PA-4E1G/75= PA-4E1G/120= PA-E3= PA-2E3=
4-port Ethernet 10BASE-T Port Adapter 8-port Ethernet 10BASE-T Port Adapter Dual-Wide Ethernet-Switch Port Adapter 4-port Token Ring 4/16 Mbps Port Adapter 1-port Fast Ethernet 100BASE-TX Port Adapter 1-port Fast Ethernet 100BASE-FX Port Adapter 2-port Fast Ethernet 100BASE-TX Port Adapter 2-port Fast Ethernet 100BASE-FX Port Adapter Gigabit Ethernet Port Adapter 1-port Enhanced ESCON Channel Port Adapter 1-port FDDI Full Duplex Multi-Mode Port Adapter 1-port FDDI Full Duplex Single-Mode Port Adapter 4-port Token Ring 4/16Mbps, Dedicated Token Ring Port Adapter 1-port HSSI Port Adapter 2-port HSSI Port Adapter CES OC3 Port Adapter 4E1 Ports 120ohms CES Port Adapter E3/E1 120 ohms 1-port ATM OC3 Single Mode Intermediate Reach Port Adapter 1-port ATM OC3 Multimode Port Adapter ATM CES Port Adapter, 4T1 CES Ports and 1 OC3 ATM SM Port ATM CES Port Adapter, 4T1 CES Ports and 1 T3 ATM Port 8-port ATM Inverse Mux E1 (120 Ohm) Port Adapter 8-port ATM Inverse Mux T1 Port Adapter 1-port ATM Enhanced E3 Port Adapter ATM Port Adapter with T3 physical interface 1-Port ATM Enhanced OC3c/STM1 Multimode Port Adapter 1-Port ATM Enhanced OC3c/STM1 Singlemode(IR)Port Adapter 1-Port ATM Enhanced OC3c/STM1 Singlemode(LR)Port Adapter 1-port ATM OC3MM PA for VXR chassis upgrade, IPP program 4-port BRI Port Adapter, U Interface 8-port BRI Port Adapter, S/T Interface 4-port Serial Port Adapter, Enhanced 8-port Serial, V.35 Port Adapter 8-port Serial, 232 Port Adapter 8-port Serial, X.21 Port Adapter 4-port E1 G.703 Serial Port Adapter (75ohm/Unbalanced) 4-port E1 G.703 Serial Port Adapter (120ohm/Balanced) 1-port E3 Serial Port Adapter with E3 DSU 2-port E3 Serial Port Adapter with E3 DSUs
Cisco 7200 Series
1-32
Chapter 1
Routers
1-port T3 Serial Port Adapter with T3 DSUs 1-port T3 Serial Port Adapter Enhanced 2-port T3 Serial Port Adapter with T3 DSUs 2-port T3 Serial Port Adapter Enhanced 1-port Multi-Channel E3 port adapter 1-port multichannel T3 port adapter 2-port multichannel E1 port adapter with G.703 120ohm interf 8-port multichannel E1 port adapter with G.703 120ohm interf Channelizes DS3 Port Adapter with 4 T1 breakout connectors 2-port multichannel T1 port adapter with integrated CSU/DSUs 4-port multichannel T1 port adapter with integrated CSU/DSUs 8-port multichannel T1 port adapter with integrated CSU/DSUs 2-port channelized T3 port adapter with BNC connectors 2-port MIX-enabled multichannel T1/E1 PA with CSU/DSU 4-port MIX-enabled multichannel T1/E1 PA with CSU/DSU 8-port MIX-enabled multichannel T1/E1 with CSU/DSU 2 SC Duplex port dual wide OC12c multi-mode port adapter 2 SC Duplex port dual wide OC12c single-mode intermediate reach port adapter 2 SC Duplex port dual wide OC12c single-mode long reach port adapter DPT-OC12 Singe-mode extended reach PA 2-port T1/E1 moderate capacity enhanced voice PA 2-port TE1 hi-capacity enhanced voice PA 1-port ESCON Channel Port Adapter 1-port Parallel (Bus & Tag) Channel Port Adapter 1-port Packet/SONET OC3c/STM1 Multimode PA 1-port Packet/SONET ONC3c/STMI1 Singlemode (IR) PA 1-port Packet/SONET OC3c/stm1 Singlemode (LR) PA
CHAPTER 1 ROUTERS
PA-T3= PA-T3+= PA-2T3= PA-2T3+= PA-MC-E3= PA-MC-T3= PA-MC-2E1/120= PA-MC-8E1/120 PA-CT3/4T1=2 PA-MC-2T1= PA-MC-4T1= PA-MC-8T1= PA-MC-2T3+= PA-MCX-2TE1= PA-MCX-4TE1= PA-MCX-8TE1= PA-SRP-OC12MM= PA-SRP-OC12SMI= PA-SRP-OC12SML= PA-SRP-OC12SMX= PA-VXB-2TE1+= PA-VXC-2TE1+= PA-1C-E= PA-1C-P= PA-POS-OC3MM= PA-POS-OC3SMI= PA-POS-OC3SML=
Cisco 7200 Series Service Adapters SA-COMP/4=2 SA-ISA SA-ENCRYPT=
Service Adapter; Compression (256 VC’s Stac)—Spare (non VXR chassis only) Integrated Services Adaptor for encryption on 7200 VXR platform Encryption Service Adapter—Spare
Cisco 7200 Series Memory and Memory Upgrades MEM-NPE-400-128MB= MEM-NPE-400-256MB= MEM-NPE-400-512MB= MEM-I/O-FLC8M= MEM-I/O-FLC20M= MEM-I/O-FLD48M= MEM-I/O-FLD128M= MEM-SD-NPE-32MB= MEM-SD-NPE-64MB= MEM-SD-NPE-128MB= MEM-SD-NPE-256MB= MEM-SD-NSE-256MB=
128MB Memory for NPE-400 in 7200 Series 256MB Memory for NPE-400 in 7200 Series 512MB Memory for NPE-400 in 7200 Series Cisco 7200 I/O PCMCIA Flash Memory, 8MB Cisco 7200 I/O PCMCIA Flash Memory, 20 MB Cisco 7200 I/O PCMCIA Flash Memory, 48 MB Cisco 7200 I/O PCMCIA Flash Memory, 128 MB 32 MB Memory Upgrade Kit for NPE-300/NPE-225/NPE-175 64 MB Memory Upgrade Kit for NPE-300/225/175 128 MB Memory Upgrade Kit for NPE-300/NPE-225/NPE-175 256 MB Memory Upgrade Kit for NPE-300 256MB Memory for NSE in 7200 Series
Cisco 7200 Series Accessories PWR-7200-AC= ACS-7200-RMK= ACS-72RDS-21R ACS-72RDS-23R
Cisco 7200 AC Power Supply With United States Cord Cisco 7200 Rack mount Kit and Cable Management Bracket Cisco 7200 Rack Density System Cisco 7200 Rack Density System
Cisco 7200 Series Basic Maintenance CON-SNT-PKG13 CON-SNT-PKG14
Cisco 7204 Series SMARTnet Maintenance Cisco 7206 Series SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. Not supported on the 7200VXR chassis. For additional port adapter compatibility for the 7200VXR, see: http://www.cisco.com/warp/public/770/fn3028.html
For More Information See the Cisco 7200 Series Web site: http://www.cisco.com/go/7200 Cisco 7200 Series
1-33
Chapter 1
Routers
Cisco 7400 Series Internet Router The Cisco 7400 Internet Router is the highest performance single-rack unit, service-rich router in the industry. This modular, one-port adapter slot unit leverages over 40 standard 7200/7500 series port adapters. Its compact, stackable architecture is expressly designed for application specific routing deployments, such as broadband services aggregation (PPP/L2TP) and WAN edge connectivity in service provider and enterprise networks. Leveraging Cisco’s patented Parallel eXpress Forwarding (PXF) technology, the Cisco 7400 series delivers a premium suite of hardware-accelerated network services.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 7401ASR-CP
• Managed services customer premise equipment (CPE) with full QoS and MPLS support • Broad range of connectivity options—via over 40 7200/7500 PAs, from 64Kbs to T1/T3 & OC-3 interfaces • Comprehensive management services with remote management, provisioning, trouble shooting and software upgrade
Cisco 7401ASR-BB
• • • •
Complete broadband subscriber services suite with highest subscribers per rack ratio Smallest form factor with stackability feature One fast LAN interface (FE/GE) and one fast WAN interface (DS3/OC3) High volume/density of PPP, PPPoE, PPPoA, L2TP tunnel aggregation and termination for broadband services like DSL, Cable, and Wireless
Key Features • Compact form factor with 1 RU, front-to-back airflow and stackability • Hardware-accelerated IP network services with Cisco PXF adaptive IP network services processor • Cost-effective Gigabit Ethernet to Gigabit Ethernet Layer 2-7 network services • Complete service suite for broadband subscriber services application • Ideal next generation CPE with full MPLS customer-edge and MPLS VPN support • Flexible WAN connectivity supporting over 40 interfaces including serial, multichannel, ISDN, Frame Relay, ATM, Packet over SONET (PoS), from NxDS0 to OC3
Competitive Products • Redback: SMS500, SMS1800, SMS10000
• Unisphere: ERX700, ERX1400
Specifications Feature
Cisco 7401ASR-BB
Routers per Chassis
1
Same as 7401ASR-BB
Fixed Ports
Two 10/100/1000 Mbps Ethernet (RJ45 or GBIC)
Same as 7401ASR-BB
Modular Slots
1
Same as 7401ASR-BB
LAN Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
Cisco 7400 Series Internet Router
1-34
Cisco 7401ASR-CP
Chapter 1
Routers
Cisco 7401ASR-CP
See Part Numbers and Ordering Information
Same as 7401ASR-BB
High-Speed Serial Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
Multichannel and ISDN Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
Digital Voice Trunk Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
SONET Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
ATM Port Adapters
See Part Numbers and Ordering Information
Same as 7401ASR-BB
Processor
NSE-1 with PXF processor
Same as 7401ASR-BB
Flash (PCMCIA)
PCMCIA 64MB or 128 MB
Same as 7401ASR-BB
DRAM Memory
256MB default, 512 MB
128 MB default, 256 MG, 521 MB
Power Supply
AC, DC48V, DC24V and Dual DC48V
Same as 7401ASR-BB
Dimensions (HxWxD)
1.72 in x 17.3 in x 11.80 in (4.37 cm x 43.9cm x 30 cm) Same as 7401ASR-BB
ROUTERS
Cisco 7401ASR-BB
Serial Port Adapters
CHAPTER 1
Feature
Selected Part Numbers and Ordering Information1 Cisco 7400 Bundles CISCO7401ASR-BB CISCO7401ASR-CP
Cisco 7401, 1 slot chassis, power supply, 256-MB SDRAM, Broadband software Cisco 7401, 1 slot chassis, power supply, 128-MB SDRAM, CPE Software
Cisco 7400 Memory Options MEM-COMP-FLD64M MEM-COMP-FLD128M MEM-7400ASR-256MB MEM-7400ASR-512MB
Cisco 7400 PCMCIA Flash disk, 64 MB Cisco 7400 PCMCIA Flash disk, 128 MB 256 MB memory for Cisco 7400 512 MB memory for Cisco 7400
Cisco 7400 ASR Transceiver Modules GBIC-LX/LH GBIC-SX=
GBIC for 1000BaseLX standard GBIC for 1000BaseSX (short wavelength)
Cisco 7401 ASR-BB, Cisco 7401 ASR-CP Port and Service Adapters PA-2FE-FX= PA-2FE-TX= PA-FE-FX= PA-FE-TX= PA-4E= PA-8E= PA-5EFL= PA-4T+= PA-8T-V35= PA-8T-232= PA-8T-X21= PA-H= PA-2H= PA-A3-T3= PA-A3-E3= PA-A3-8E1IMA= PA-A3-OC3MM= PA-A3-OC3SMI PA-A3-OC3SML= PA-4E1G/75= PA-4E1G/120= PA-E3= PA-2E3= PA-T3= PA-T3+= PA-2T3= PA-2T3+= PA-MC-E3= PA-MC-T3=
2-port Fast Ethernet 100BaseFX port adapter spare 2-port Fast Ethernet 100BaseTX port adapter spare 1-port Fast Ethernet 100BaseFX port adapter spare 1-port Fast Ethernet 100BaseTX port adapter spare 4-port Ethernet 10BaseT port adapter spare 8-port Ethernet 10BaseT port adapter spare 5-port Ethernet 10BaseFL port adapter spare 4-port serial port adapter, enhanced spare 8-port serial, v.35 port adapter spare 8-port serial, 232 port adapter spare 8-port serial, x.21 port adapter spare 1-port HSSI port adapter spare 2-port HSSI port adapter spare 1-port ATM enhanced DS3 port adapter spare 1-port ATM enhanced E3 port adapter spare 8-port ATM inverse multiplexer E1 (120-ohm) port adapter spare 1-port ATM enhanced OC3c/STM1 multimode port adapter spare 1-port ATM enhanced OC3c/STM1 single-mode (IR) port adapter 1-port ATM enhanced OC3c/STM1 single-mode (LR) port adapter spare 4-port E1 G.703 serial port adapter (75-ohm/unbalanced) spare 4-port E1 G.703 serial port adapter (120-ohm/unbalanced) spare 1-port E3 serial port adapter with E3 DSUs spare 2-port E3 serial port adapter with E3 DSUs spare 1-port T3 serial port adapter with T3 DSUs spare 1-port T3 serial port adapter enhanced spare 2-port T3 serial port adapter with T3 DSUs spare 2-port T3 serial port adapter enhanced spare 1-port multichannel E3 port adapter spare 1-port multichannel T3 port adapter spare
Cisco 7400 Series Internet Router
1-35
Chapter 1
PA-MC-2E1/120= PA-MC-2T1= PA-MC-2T3+= PA-MC-4T1= PA-MC-8T1= PA-MC-8E1/120= PA-8B-S/T= PA-4B-U= PA-POS-OC3MM= PA-POS-OC3SMI= PA-POS-OC3SML= PA-VXB-2TE1+= PA-VXC-2TE1+=
Routers
2-port multichannel E1 port adapter with G.703 120-ohm interface spare 2-port multichannel T1 port adapter with integrated CSU/DSUs spare 2-port multichannel T3 port adapter spare 4-port multichannel T1 port adapter with integrated CSU/DSUs spare 8-port multichannel T1 port adapter with integrated CSU/DSUs spare 8-port multichannel E1 port adapter with G.703 120-ohm interface spare 8-port BRI port adapter, S/T interface spare 4-port BRI port adapter, U interface spare 1-port packet/SONET OC3cSTM1 multimode port adapter spare 1-port packet/SONET OC3cSTM1 single mode (IR) port adapter spare 1-port packet/SONET OC3cSTM1 single mode (LR) port adapter spare 2-port T1/E1 moderate capacity enhanced voice port adapter spare 2-port T1/E1 high capacity enhanced voice port adapter spare
Cisco 7400 ASR Power Supplies and Cords CAB-AC=
AC power cord, US (power cords also available for UK, Europe, Italy, Australia, and Argentina)
Cisco ASR Spares and Accessories ACS-7400-RMK= MAS-74KBLANK= MAS-74KSLOTDIV= PKG-7400=
Cisco 7400 Rackmount kit and Cable Management Bracket Cisco 7400 Blank Card Carrier Cisco 7400 Port Adapter Divider (spare) Cisco 7400 Spare System Packaging Material
Cisco 7400 ASR Feature License FR-BUS74 FR-BUS74= FR-WPP74 FR-IR74 FR-IR74= FR74-40= FR74-56= FR74-R-I= FR74-R-A= FR74-C-A= FL74-H=
Cisco IOS 7400 Broadband User Services License Cisco IOS 7400 Broadband User Services License spare Cisco IOS 7400 WAN Packet Protocols/NetFlow License Cisco IOS 7400 Interdomain Routing/Tag Switching License Cisco IOS 7400 Interdomain Routing/Tag Switching License spare Cisco IOS 7400 40-bit encryption Cisco IOS 7400 56-bit encryption Cisco IOS 7400 Layer 3 Switching to IP Cisco IOS 7400 Layer 3 Switching to Enterprise Cisco IOS 7400 IP to Enterprise Cisco IOS 7400 Firewall Upgrade
For More Information See the Cisco 7400 Series Web site: http://www.cisco.com/go/7400
Cisco 7400 Series Internet Router
1-36
Chapter 1
Routers
Cisco 7500 Series
Sell This Product
When a Customer Needs These Features
Cisco 7505
• Solution for complex networking products in the data center, the workgroup, and the core of the network • One CyBus
Cisco 7507
• High-bandwidth applications with medium-density requirements • Dual CyBuses
Cisco 7513
• Ideal solution for large, collapsed backbone environments or as an aggregation router supporting large numbers of remote users • Dual CyBuses
Key Features • High-performance switching—Delivers high performance for mission-critical applications by supporting high-speed media and high-density configurations; using the processing capabilities of the Versatile Interface Processors (VIP4) and Cisco Express Forwarding, the Cisco 7500 series system capacity can exceed two million packets per second • Full support for Cisco IOS software and enhancements for high-performance network services—Performs network services such as quality of service, security, compression, and encryption at high speed; VIP technology extends the performance of these services through distributed IP services • High port density—Provides high port density and an extensive range of LAN and WAN media; this feature dramatically reduces the cost per port and allows a flexible configuration • Unmatched interface flexibility—The Cisco 7000 series supports a broad selection of Interface Processors (IPs) and Port Adapters (PAs). Port adapters are shared with the Cisco 7200, which simplifies sparing and protects customer investment in interfaces • High Availability—Enhanced features and capabilities include redundant route processors, power supplies, and software fault isolation and failover capabilities
Competitive Products • Juniper: M5, M10
• Unisphere: ERX700, ERX1400
Cisco 7500 Series
1-37
ROUTERS
When to Sell
CHAPTER 1
The Cisco 7500 Internet Router is a high-end, multiprotocol platform, now with twice the performance and enhanced high availability. This series combines Cisco’s proven software technology with exceptional reliability, availability, serviceability, and performance features to meet the requirements of today’s most mission-critical internetworks. The Cisco 7500 series provides information system professionals with the flexibility they need to meet the constantly changing requirements at the core and distribution points of the internetwork.
Chapter 1
Routers
Specifications Feature
Cisco 7505
Cisco 7507
Cisco 7513
Routers per Chassis
1
1
1
Fixed Ports
None
None
None
Modular Slots
5
7
13
Interface Processor Slots
4
5
11
RSPs
1 (100-MHz RSP2, 200-MHz RSP4+, or 250-MHz RSP8)
2 (optional dual RSPs; 2 (optional dual RSPs; 100-MHz RSP2, 200-MHz 100-MHz RSP2, 200-MHz RSP4+, or 250-MHz RSP8) RSP4+, or 250-MHz RSP8)
Cisco Mainframe Channel Connection Port Adapters
1-port ESCON Mainframe Channel Port Adapter 1-port Parallel Mainframe Channel Port Adapter
Same as Cisco 7505
Same as Cisco 7505
Same as Cisco 7505
Same as Cisco 7505
Same as Cisco 7505
Same as Cisco 7505
Advanced Technology 1-port Gigabit Ethernet Interface Processors 1-port Gigabit Ethernet Enhanced 2-port Dynamic Packet Transport OC12/STM4
Hardware Service Adapters
Compression Service Adapter (CSA)
VIP Modules
VIP2-40, VIP2-50, VIP4-50, VIP4-80
Same as Cisco 7505
Same as Cisco 7505
Processor
Mips RISC
Mips RISC
Mips RISC
1 Gbps backplane 4 interface processor slots 1 RSP slot
7 Bus Slots 2 Gbps backplane 5 interface processor slots 2 RSP slots
13 Bus Slots 2 Gbps backplane 11 interface processor slots 2 RSP slots
Boot Memory
256 KB
256 KB
256 KB
Shared Memory
16 MB (min); 40 MB (max)
Same as Cisco 7505
Same as Cisco 7505
DRAM Memory
32 MB (RSP2 default) 64 MB (RSP4+, RSP8 default) 128 MB (RSP2 max) 256 MB (RSP4+ max) 256 MB (RSP8 max)
Same as Cisco 7505
Same as Cisco 7505
Power Supply
AC or DC
AC, dual AC/DC, dual DC AC, dual AC/DC, dual DC
Dimensions (HxWxD)
10.5 x 17.5 x 17 in.
19.25 x 17.5 x 25 in.
High-Speed Backplane 5 Bus Slots
Selected Part Numbers and Ordering Information1 Cisco 7500 Series Route Switch Processor1 RSP2= RSP4+= RSP8=
Cisco 7500 Series Router Switch Processor 2 Cisco 7500 Series Route Switch Processor 4+ Cisco 7500 Series Route Switch Processor 8
Cisco 7500 Series Bundles CISCO7507-CH CISCO7507/4-CH CISCO7507/8-MX-CH CISCO7513-CH CISCO7513/4-CH
Cisco 7507 w/pwr, IP, RSP2,32 MB,16MFL Cisco 7507 w/pwr, IP, RSP4,32 MB,16MFL Cisco 7507, 7 Slot, Dual Bus, 1 RSP8, 1 PS, w/IOS Cisco 7513 w/pwr, IP, RSP2,32 MB,16MFL Cisco 7513 w/pwr, IP, RSP4,32 MB,16MFL
Cisco 7500 Series Blank Card Carrier MAS-7KBLANK=
Blank Card Carrier
Cisco 7500 Memory and Memory Upgrades MEM-RSP4-FLC16M= MEM-RSP4-FLC20M= MEM-RSP8-FLC16M= MEM-RSP8-FLC20M= MEM-RSP-FLC32M= MEM-RSP4-FLC32M= MEM-RSP8-FLC32M= MEM-RSP4-32M=
RSP4 Flash Card: 16 MB Kit RSP4 Flash Card: 20 MB Kit RSP8 Flash Card: 16 MB Kit RSP8 Flash Card: 20 MB Kit RSP2 Flash Card: 32 MB Kit RSP4/RSP4+ Flash Card: 32 MB Kit RSP8 Flash Card: 32 MB Kit RSP4 32 MB DRAM Upgrade Kit
Cisco 7500 Series
1-38
33.75 x 17.5 x 22 in.
Chapter 1
Routers
RSP4 64 MB DRAM Option RSP4 128 MB DRAM Upgrade Kit RSP4 256 MB DRAM Upgrade Kit RSP8 64 MB DRAM Option RSP8 128 MB DRAM Upgrade Kit RSP8 256 MB DRAM Upgrade Kit 64 MB DRAM Option for VIP2-40 (Spare) 8 MB SRAM Option for VIP2-50/xIP-50 128 MB SDRAM Option for VIP4 256 MB SDRAM Option for VIP4
CHAPTER 1 ROUTERS
MEM-RSP4-64M= MEM-RSP4-128M= MEM-RSP4-256M= MEM-RSP8-64M= MEM-RSP8-128M= MEM-RSP8-256M= MEM-VIP240-64M= MEM-VIP250-8M-S= MEM-VIP4-128M-SD= MEM-VIP4-256M-SD=
Cisco 7500 License for Advanced Software Options FR-WPP75= FR-IR75= FR75-C-DS= FR75-C-BS= FR75-C-A= FR75-40= FR75-56= FL75-K2= FL75-L= FL75-H+
Cisco IOS RSPx Series WAN Packet Protocols/Netflow License Cisco IOS RSP Series InterDomain Routing License Cisco IOS RSPx Series IP to IP/IPX/IBM Cisco IOS RSPx Series IP to Desktop/IBM Cisco IOS RSPx Series IP to Enterprise Cisco IOS RSPx Encryption 40 Upgrade Cisco IOS RSPx Encryption 56 Upgrade Cisco IOS 7500 Series IPSEC 3DES Upgrade Cisco IOS 7500 Series IPSEC 56 Upgrade Cisco IOS 7500 Series Firewall
Cisco 7500 Gigabit Interface Processors & Converters GEIP= GEIP+ GBIC-SX= GBIC-LX/LH=
Gigabit Ethernet Interface Processor Gigabit Ethernet Interface Processor, Enhanced Gigabit Interface. Converter For 1000BASE-SX (Short Wavelength) Gigabit Interface Converter for 1000BASE-LX standard
Cisco 7500 Series DPT Interface Processors SRPIP-OC12MM= SRPIP-OC12SMI= SRPIP-OC12SML= SRPIP-OC12SMX=
Dynamic Packet Transport Interface Processor—OC12MM Dynamic Packet Transport Interface Processor—OC12SMI Dynamic Packet Transport Interface Processor—OC12SML DPT-OC12 Single-mode extended reach Interface Processor
Cisco 7500 Fast Ethernet Interface Processor FEIP2-DSW-2TX= FEIP2-DSW-2FX=
2-port Fast Ethernet IP with Dist. Switching (100TX) 2-port Fast Ethernet IP with Dist. Switching (100FX)
Cisco 7500 Versatile Interface VIP2-40= VIP2-50= VIP4-50= VIP4-80=
Versatile Interface Processor 2, Model 40 Versatile Interface Processor 2, Model 50 Versatile Interface Processor 4, Model 50 Versatile Interface Processor 4, Model 80
Cisco 7500 Port Adapters2 Cisco 7500 Service Adapters SA-COMP/4=
Service Adapter; Compression (256 VC''s Stac)—spare
Cisco 7500 Power Supplies PWR/7-DC= PWR/7-AC= PWR-7513-DC= PWR-7513-AC=
Cisco 7000/7507 DC Power Supply (Spare) Cisco 7000/7507 AC Power Supply, US (Spare) Cisco 7513 DC Power Supply (Spare) Cisco 7513 AC Power Supply Spare, US
Cisco 7500 Series Basic Maintenance CON-SNT-PKG17 CON-SNT-PKG18
Cisco 7507 SMARTnet Maintenance Cisco 7513 SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. The port adapters for the 7500 series are the same as those for the 7200 series. Please see page 1-32 for part numbers.
For More Information See the Cisco 7500 Series Web site: http://www.cisco.com/go/7500
Cisco 7500 Series
1-39
Chapter 1
Routers
Cisco 7600 Series Internet Router The Cisco 7600 Internet Router combines optical WAN/MAN networking and high-volume Ethernet aggregation with a focus on line-rate delivery of high-touch IP services at the edge of service provider networks or large data centers. The Cisco 7600 Internet Router is an important component of Cisco's end-to-end IP+Optical offerings, helping service providers break through service and bandwidth barriers to increase new revenues and profits. Ideal for large data centers, the 7600 series provides greater cost efficiencies and easier management of high volumes of Ethernet traffic and high-speed optical WAN connectivity.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 7609
• • • • •
Consolidated WAN/MAN/LAN in one platform High volume aggregation of Ethernet traffic (server farms) Multiple high-speed/Optical/SONET WAN connections Wide range of WAN/MAN interfaces from NxDS0, T1, T3 to OC-48 with line rate services High speed WAN aggregation, Metro aggregation, Consolidated POP, Internet Data Center (IDC)
Key Features • High-touch, line-rate IP services at 6 Mpps per slot—QoS, Hierarchical Traffic Shaping, Destination Sensitive Services (accounting, billing and QoS), MPLS • 30 Mpps forwarding processor and up to 512 MB DRAM for Internet routing • Modular and scalable 256 Gbps switch fabric • Compatible with the Catalyst 6000 Family LAN interfaces offering 10 Mbps Ethernet to 1 Gbps • Wide range of WAN/MAN interfaces—DS0 to OC-48 • Leverages standard 7200/7500 series port adapters with flex WAN cards for investment protection • High performance, high density Optical Services Modules (OSMs)—OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, 4-port GE WAN services, Channelized OC-12/T3, Channelized OC48/T3 • "Adaptive" network processing—PXF IP Services Processors on each OSM for flexible IP service implementation • Industry’s first Ethernet-over-MPLS implementation for LAN/VLAN extensions across MANs • Supports the ability to monitor service levels delivered to customers under service level agreements (SLAs) Cisco 7600 Series Internet Router
1-40
Chapter 1
Routers
Competitive Products • Unisphere: ERX700, ERX1400
CHAPTER 1
• Juniper: M20, M40 • Extreme: Black Diamond 6808
Specifications
ROUTERS
Feature
Cisco 7609
Routers per Chassis
1
Fixed Ports
None
Modular Slots
9
Gigabit Ethernet (GE)
4-port Gigabit Ethernet WAN (GBIC)
SONET Port Adapters
See Part Numbers and Ordering Information
ATM Port Adapters
2-port OC12-c, STM-4c ATM MM and SM-IR
Processor
Supervisor Engine 2 w/MSFC2 and PFC2 (Multiservice Feature Card 2 with Policy Feature Card 2)
High-Speed Backplane
Scalable backplane from 30Gbps to 256Gbps
Boot Memory
16MB boot Flash, 2MB programmable Flash
Optional PCMCIA Flash Card
16 to 20MB
DRAM Memory
128MB (default), 512MB (max) (same for Sup2, MSFC2, PFC2)
Power Supply
AC or DC (1300 or 2500V)
Dimensions (HxWxD)
25.2 x 17.2 x 18.1 in. (64.0 x 43.7 x 46.0 cm)
Selected Part Numbers and Ordering Information1 Cisco 7600 Optical Service Router1 OSR-7609-AC OSR-7609-DC OSR-7609=
Cisco 7609 OSR, Route Processor, 512 MB DRAM, 2500W AC Power Cisco 7609 OSR, Route Processor, 512 MB DRAM, 2500W DC Power Cisco 7609 Optical Services Router (OSR)
Cisco 7600 Optical Services Modules (OSMs)2 OSM-4GE-WAN-GBIC OSM-8OC3-POS-MM OSM-16OC3-POS-MM OSM-2OC12-POS-MM OSM-4OC12-POS-MM OSM-1OC48-POS-SS OSM-4CHOC12/T3-SI OSM-8CHOC12/T3-MM OSM-1CHOC48/T3-SS OSM-2CHOC48/T3-SS
4-port Gigabit Ethernet Optical Services Module, GBIC 8-port OC-3/STM-1 SONET/SDH OSM, MM, with 4 GE (also available in SM-IR and SM-LR) 16-port OC-3/STM-1 SONET/SDH OSM, MM, with 4 GE 2-port OC-12/STM-4 SONET/SDH OSM, MM, with 4 GE 4-port OC-12/STM-4 SONET/SDH OSM, MM, with 4 GE 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR, with 4 GE 4-port Singlemode Intermediate Reach OC12 to T3 with 4 Gigabit Ethernet 8-port Multimode OC12 to T3 with 4 Gigabit Ethernet 1-port Short Reach OC48 to T3 with 4 Gigabit Ethernet 2-port Short Reach OC48 to T3 with 4 Gigabit Ethernet
Cisco 7600 Line Cards WS-X6348-RJ-45 WS-X6516-GBIC WS-X6182-2PA
Catalyst 6000 48-port 10/100, Upgradable to Voice, Enh QoS Catalyst 6500 16-port GigE Mod: Fabric-Enabled (Req. GBICs) Catalyst 6000 FlexWAN Module
Cisco 7600 OSM Memory Options MEM-OSM-64M MEM-OSM-128M MEM-OSM-256M MEM-OSM-512M
64 MB ECC Memory for Optical Services Modules (default) 128 MB ECC Memory for Optical Services Modules 256 MB ECC Memory for Optical Services Modules 512 MB ECC Memory for Optical Services Modules
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. Most OSMs are also available in multiple configurations, including multimode, single mode, IR/LR. See URL listed under “For More Information” for all 7600 part numbers.
For More Information See the Cisco 7600 Series Web site: http://www.cisco.com/go/7600 Cisco 7600 Series Internet Router
1-41
Chapter 1
Routers
Cisco 10000 Series Internet Router The Cisco 10000 Series is the premier Cisco edge aggregation family designed for service providers who want to support hundreds to thousands of T1/T3 based Internet customers. This family is optimized to deliver consistent performance across thousands of line-rate IP connections via dedicated, leased line services. It easily supports continuous, high traffic load due to its Parallel Express Forwarding (PXF) engine, a broad range of transport interfaces, and even IPSec service modules for very high volume VPN applications.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 10000 Series
• Tier 1 and Tier 2 ISPs planning to offer high-performance IP services as part of their business strategy • Tier 1 and Tier 2 ISPs requiring hundreds to thousands of DS0, DS1, E1, and DS3 access-line connections per point of presence (POP) • Any service provider requiring DS0, DS1, E1, & DS3 dedicated access aggregation (IXCs, CLECs, PTTs, etc.)
Competitive Products • Juniper: M5, 10, and 20 • Unisphere: ERX system 700 and 1400
• Redback: SMS10000
Specifications Feature
Cisco 10008
Cisco 10005
Modular Slots
Eight slots for interface modules Two slots for PRE modules (1 active, 1 redundant)
Five slots for interface modules Two slots for PRE modules (1 active, 1 redundant)
Line-Card Slots
Eight maximum
Five maximum
Supported Line Cards
See Part Numbers and Ordering Information
See Part Numbers and Ordering Information
Interface Mix
DS0, DS1/E1, clear-channel DS3
Same as Cisco 10008
Service Modules
IPsec VPN Service Module
Same as Cisco 10008
Processor Type
Parallel eXpress Forwarding (PXF)
Parallel eXpress Forwarding (PXF)
Flash Memory
48 MB (default); 128 MB (maximum)
Same as Cisco 10008
DRAM Memory
512 DRAM (default)
Same as Cisco 10008
Software Supported
Cisco IOS 12.0
Same as Cisco 10008
Power Supply
AC or DC
AC or DC
Hot-Swappable/OIR
Yes
Yes
Backplane Capacity
51.2 Gbps
32 Gbps
Dimensions (H x W x D)
21.75 x 17.5 x 12 in. (55.2 x 44.5 x 30.5 cm) 11.9 x 17.5 x 24 in. (30.2 x 44.4 x 60.9 cm) rack-mountable: 19 in. to 23 in. (front, middle, or back) rack-mountable: 19 in. to 23 in. (front, middle, or back)
Weight
130 lb (59.02 kg) fully configured chassis
Power
DC input voltage: -48 VDC/-60 VDC DC input voltage: -48 VDC/-60VDC AC input voltage: 100-240 VAC, 50/60 Hz, single-phase AC input voltage: 100-240 VAC, 50/60 Hz, single phase Maximum power consumption: 1200W Maximum power consumption: 1200W
Selected Part Numbers and Ordering Information1 Cisco 10005 Internet Router1 ESR10005-1P1DC
C10000 5-slot chassis, 1 PRE, 1 DC PEM
Cisco 10000 Series Internet Router
1-42
130 lb (59.02 kg) fully configured chassis
Chapter 1
Routers
C10000 5-slot chassis, 1 PRE, 1 AC PEM C10000 5-slot chassis, 1 PRE, 1 DC PEM, 1 CT3 Module C10000 5-slot chassis, 1 PRE, 1 AC PEM, 1 CT3 Module C10000 5-slot chassis, 1 PRE, 1 DC PEM, 1 CH STM-1 Module C10000 5-slot chassis, 1 PRE, 1 AC PEM, 1 CH STM-1 Module C10000 5-slot chassis, 2 PREs, 2 DC PEMs C10000 5-slot chassis, 2 PREs, 2 AC PEMs C10000 5-slot chassis, 2 PREs, 2 DC PEMs, 1 CT3 Module C10000 5-slot chassis, 2 PREs, 2 AC PEMs, 1 CT3 Module C10000 5-slot chassis, 2 PREs, 2 DC PEMs, 1 CH STM-1 Module C10000 5-slot chassis, 2 PREs, 2 AC PEMs, 1 CH STM-1 Module
CHAPTER 1 ROUTERS
ESR10005-1P1AC ESR10005-1P1DC+6 ESR10005-1P1AC+6 ESR10005-1P1DC+4CH ESR10005-1P1AC+4CH ESR10005-2P2DC ESR10005-2P2AC ESR10005-2P2DC+6 ESR10005-2P2AC+6 ESR10005-2P2DC+4CH ESR10005-2P2AC+4CH
Cisco 10008 Internet Router ESR10008-1P1AC ESR10008-1P1DC+6 ESR10008-1P1AC+6 ESR10008-1P1DC+4CH ESR10008-1P1AC+4CH ESR10008-2P2DC ESR10008-2P2AC ESR10008-2P2DC+6 ESR10008-2P2AC+6 ESR10008-2P2DC+4CH ESR10008-2P2AC+4CH
C10000 8-slot chassis, 1 PRE, 1 AC PEM C10000 8-slot chassis, 1 PRE, 1 DC PEM, 1 CT3 Module C10000 5-slot chassis, 1 PRE, 1 AC PEM, 1 CT3 Module C10000 8-slot chassis, 1 PRE, 1 DC PEM, 1 CH STM-1 Module C10000 8-slot chassis, 1 PRE, 1 AC PEM, 1 CH STM-1 Module C10000 8-slot chassis, 2 PREs, 2 DC PEMs C10000 8-slot chassis, 2 PREs, 2 AC PEMs C10000 8-slot chassis, 2 PREs, 2 DC PEMs, 1 CT3 Module C10000 8-slot chassis, 2 PREs, 2 AC PEMs, 1 CT3 Module C10000 8-slot chassis, 2 PREs, 2 DC PEMs, 1 CH STM-1 Module C10000 8-slot chassis, 2 PREs, 2 AC PEMs, 1 CH STM-1 Module
Cisco 10000 Series Line Cards ESR-6T3 ESR-1COC12-SMI ESR-1GE ESR-GBIC-LHLX ESR-GBIC-SX ESR-GBIC-ZX ESR-1OC12/P-SMI ESR-1OC12ATM-SM ESR-4OC3-ChSTM-1
6 port channelized T3 line card 1-port channelized OC12 (STS12) line card, single mode, intermediate reach (IR) 1-port Gigabit Ethernet Card (requires GBIC) 1000base-LH GBIC, singlemode, standardized for ESR 1000base-SX GBIC, multimode, standardized for ESR 1000base-ZX GBIC, singlemode, standardized for ESR 1-port OC12/STS 12C/STM4POS, singlemode, intermediate reach (IR) 1-port OC12/STM4 ATM line card, single mode 4-port channelized STM-1 SDH single mode line card
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 10000 Series Web site: http://www.cisco.com/go/10000
Cisco 10000 Series Internet Router
1-43
Chapter 1
Routers
Cisco 12000 Series Internet Router To help service providers meet the challenge of building services point of presence (POP) and Internet data center networks, the Cisco 12000 Series is a key component of Cisco’s IP+Optical solutions and is the industry's premier, next-generation Internet backbone routing platform. Its unmatched configuration versatility and superior distributed architecture delivers high scalability, guaranteed priority packet delivery, reduced network operations costs, and investment protection. The Cisco 12000 Series is a complete family of Internet-class routing platforms, including the following: • Six flexible chassis options that fit your scaling and real estate needs (2.5 & 10 Gbps full duplex per slot, quarter rack to full rack sizes) • Extensive portfolio of line cards and other options deliver a breadth of interface technologies including Channelized SONET, ATM, DPT, PoS, and Gigabit Ethernet at high performance (up to OC-192) and high availability • Industry-leading Cisco IOS Software • Cisco 12000 Manager & other tools to deploy, configure and manage the 12000 Series
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 12008 and 12012 Internet Routers
• Between 40 and 60 Gbps total switching capacity in 8 or 12 slots • Support for ATM, DPT, POS, GE/FE technologies ranging from DS1 through OC-48
Cisco 12016 Internet Routers
• A total of 80 Gbps switching capacity scalable to 320 Gbps via 10 Gbps switch fabric upgrade kit • Support for ATM, DPT, POS, GE/FE technologies ranging from DS1 through OC-192 • An easy migration path for scaling to 10 Gbps networking
Cisco 12400 Series Internet Router
• • • •
Cisco 12000 Manager
• An element management solution to increase service velocity and decrease operation costs
Switching capacity from 120 Gbps up to 320 Gbps Support for ATM, DPT, POS, GE/FE technologies ranging from DS1 through OC-192 10 Gbps carrier class networking in a quarter-rack, half-rack and full rack, low-power configuration Support for industry-leading QoS and CoS features and ideal for peering, transit, POP consolidation, and IDC bandwidth aggregation as well as latency-sensitive applications like voice and streaming video
Key Features • Configuration versatility and high scalability –
2.5 & 10 Gbps (full duplex) per slot options for 40 to 320 Gbps switching capacity
–
Largest selection of 10 Gbps networking options available on the market today
–
16 slot chassis options help providers reduce POP complexity through consolidation—reducing the number of routers needed
–
Quarter-rack to full rack configurations and low power consumption Cisco 12000 Series Internet Router
1-44
Chapter 1
–
Routers
• Guaranteed Priority Packet Delivery Essential for supporting latency-sensitive applications like voice and video
–
Guarantees that packets always arrive in correct order
–
Cisco exclusive solution, unique in the industry
–
Enabled by distributed architecture, and class of service features including low latency queuing and virtual output queueing to prevent head-of-line (HOL) blocking and maintain packet order integrity
ROUTERS
–
• Reduced Network Operation Costs and Investment Protection –
High availability features including no single points of failure
–
Non-service impacting online insertion and removal (OIR) of components and front accessibility reduces downtime and simplifies maintenance
–
NEBS compliance for service provider carrier-class requirements
–
Convenient field upgrade kits reduce migration costs to protect existing deployments
–
Existing 12000 (previously GSR) line cards can be re-deployed in the 12400 series
Competitive Products • Juniper: M160, M40, and M20 • Avici: Terabit Switch Router (TSR)
• Lucent: NX64000 • Pluris: TNR Terabit Router
Specifications Feature
Cisco 12008
Cisco 12016 Cisco 12012 Cisco 12416 Cisco 12406 Cisco 12410
Switching Capacity
40 Gbps
60 Gbps
80 Gbps; 320 Gbps1 120 Gbps
200 Gbps
Capacity per slot (full duplex)
2.5 Gbps
2.5 Gbps
2.5 Gbps; 10 Gbps1 10 Gbps
10 Gbps
Chassis Slots
8
12
16
6
10
Supported Protocols
IPv4, MPLS, BGPv4, IS-IS, OSPF Same as Cisco v. 2.0, EIGRP, RIP v2, IGMP, PIM 12008 (dense and sparse mode)
Same as Cisco 12008
Same as Cisco 12008
Same as Cisco 12008
Management
CLI, SNMP, Cisco 12000 Same as Cisco Manager—The Gigabit Route 12008 Processor supports two serial ports (console and AUX connection) and one 10/100 port
Same as Cisco 12008
Same as Cisco 12008
Same as Cisco 12008
Dimensions
24.85 x 17.4 x 21.2 in. (63.1 x 44.2 x 56 x 17.3 x 21 in. 72.5 x 18.75 x 24 in. 18.5 x 18.9 x 28 in. 37.5 x 19 x 24 in 53.8 cm) (142.2 x 43.9 x 53.3 (184.2 x 47.6 x 61 (47 x 48 x 71.1 cm)3 (95.25 x 48.26 x 61 cm) cm)2 cm)4
Supported Line Cards
See Part Numbers and Ordering Same as Cisco Information 12008
Same as Cisco 12008 plus: 4-port OC-48c/STM-16 POS and 1-port OC-192c/STM-64c POS5
CHAPTER 1
High density, high-speed interfaces ranging from DS1 to SONET OC-192c/STM64c to maintain system performance that scales with each card added
Same as Cisco Same as Cisco 12008 plus: 12008 plus: 4-port 4-port OC-48c/STM-16 OC-48c/STM-16 POS and 1-port POS and 1-port OC-192c/STM-64c OC-192c/STM-64c POS POS
1. Switch fabric upgrade kit must be installed for this performance.
Cisco 12000 Series Internet Router
1-45
Chapter 1 2. 3. 4. 5.
Routers
Includes power, front cover, rack mount flanges, and cable-management system Includes rack-mount flanges, power entry module pullouts, blower, and handle Includes cable-management system and front cover The Cisco 12016 is field upgradeable to a 12416 (supporting 10 Gbps per slot) via a switch fabric upgrade kit.
Selected Part Numbers and Ordering Information1 Cisco 12000 Series1 GSR6/120-AC GSR8/40 GSR10/200-AC GSR10/200-DC GSR12/60 GSR16/80-AC-8R GSR16/80-AC4-8R GSR16/80-DC-8R GSR16/320-AC GSR16/320-AC4 GSR16/320-DC
GSR 12406 with AC power Option Cisco 12008 GSR 40Gbps;1GRP,1CSC-GSR8,3SFC-GSR8,1DC Cisco 12410 200 Gbps; 1GRP, 2 CSC, 5 SFC, 2 Alarm, 2 AC Cisco 12410 200 Gbps; 1GRP, 2 CSC, 5 SFC, 2 Alarm, 2 DC Cisco 12012 GSR 60Gbps;1GRP,1CSC,3SFC,1DC Cisco 12016 80 Gpbs; 1GRP, 2CSC, 3SFC, 2Alarm, 3AC, 8Rails Same as GSR16/80-AC-8R but with 4AC And Requires 8 Foot Rack Cisco 12016 80 Gpbs; 1GRP, 2CSC, 3SFC, 2Alarm, 4DC, 8Rails Cisco 12416 320 Gbps; 1GRP, 2CSC, 3SFC, 2Alarm, 3AC, 8Rails Same As GSR16/320-AC-8R but with 4 AC And Requires 8 Foot Rack Cisco 12416 320 Gbps; 1GRP, 2CSC, 3SFC, 2Alarm, 4DC, 8Rails
Cisco 12000 Series Processors GRP-B=
Route Processor, 128MB and 20MB Flash, ECC support, Spare
Cisco 12000 Series Line Cards2 LC-4OC3/POS-MM= LC-1OC12/ATM-MM= LC-1OC12/POS-MM= 2CHOC3/STM1-IR-SC= 4OC3/ATM-MM-SC= 4OC3/POS-LR-SC= 4OC12/ATM-MM-SC= 4OC12/POS-MM-SC-B= 4OC12/POS-IR-SC-B= OC12/SRP-IR-SC-B= OC12/SRP-LR-SC-B= OC12/SRP-MM-SC-B= OC12/SRP-XR-SC= OC48/SRP-LR-B-PR= OC48/SRP-LR-SC-B= OC48E/POS-LR-FC-B= OC48E/POS-LR-SC-B= OC48E/POS-SR-FC-B= OC48E/POS-SR-SC-B= 8OC3/POS-MM= 16OC3/POS-MM= 3GE-GBIC-SC= GE-GBIC-SC-B= 6CT3-SMB= 6DS3-SMB= 6DS3-SMB-B= 6E3-SMB= 12DS3-SMB= 12DS3-SMB-B= 12E3-SMB= CHOC12/STS3-IR-SC= LC-OC12-DS3= 8FE-FX-SC-B= 8FE-TX-RJ45-B=
4-port OC3/STM1 Packet Over SONET/SDH Line Card, Multi-Mode (also available in single mode) 1-port OC12/STM4 ATM Line Card, Multi-Mode (also available in single mode) 1-port OC12/STM4 Packet Over SONET/SDH Line Card, Multi-Mode (also available in single mode) Channelized OC3/STM1, DS1/E1, 2 ports Intermediate Reach 4-port OC3/STM1 multimode ATM line card (also available in intermediate reach) Single mode Long reach Quad OC-3 POS/STM1 linecard 4-port OC-12/STM4 ATM Line Card multimode spare (also available in intermediate reach)
OC12 SRP IR line card OC12 SRP LR line card OC12 SRP MM line card OC12 SRP single ring linecard, single mode 1550, XR Two OC48/SRP-LR-SC-B Line Cards with MATE Cable (also available in short reach) OC48 SRP Rev-B Line Card, Single Mode, Long Reach (also available in short reach) 1-port OC-48c/STM-16c SONET/SDH 1550nm LR with FC 1-port OC-48c/STM-16c SONET/SDH 1550nm LR with SC 1-port OC-48c/STM-16c SONET/SDH 1310nm SR with FC 1-port OC-48c/STM-16c SONET/SDH 1310nm SR with SC 8-port OC3/STM1 SONET/SDH Multi-Mode LC with MTRJ conn Spare (also available in single mode) 16-port OC3/STM1 SONET/SDH Multi-Mode LC with MTRJ conn (also available in single mode) GSR12000 three-port GE line card GSR12000 single port Gigabit Ethernet line card Channelized T3 for the GSR 6-port DS3 line card E3 line card, 6 ports 12-port DS3 line card 12DS3-SMB-B w/ ECC E3 line card, 12 ports Channelized OC-12/STM-4 with four STS-3c/STM-1 POS paths 1-port Channelized OC-12 with 12 DS3s spare GSR 8-port 100baseFX, SC connector, version B 8-port 100baseTX, RJ45 connector type, version B
Additional Line Cards for 12400 Series OC192/POS-IR-SC 4OC48/POS-LR-FC
1-port OC192c/STM64c POS, 1550nm IR, SC 4-port OC-48c/STM-16c SONET/SDH LR with FC
Cisco 12000 Manager EMS-12K-2.1-KIT EMS-12k-MGMT-LIC
Cisco 12000 Manager 2.1 CD & Release Notes, Cisco Element Management Framework 3.1 CD and documentation Cisco 12000 Manager 2.1 per node licensing option when purchasing new Cisco 12000 nodes
Cisco 12000 Series Internet Router
1-46
Chapter 1
Routers
SP-SAU-12k-EMS2 Cisco 12000 Manager 2.x Software Support and Upgrade service contract SP-SAU-12k-MGTLIC2 Cisco 12000 Manager 2.x Management License Support and Upgrade per-chassis service contract
CHAPTER 1
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability) 2. Many Line Cards are also available in multiple configurations, including multimode, single mode, IR/LR. See URL listed under “For More Information” for all 12000 part numbers.
ROUTERS
For More Information See the Cisco 12000 Series Web site: http://www.cisco.com/go/12000
Cisco SN 5420 Storage Router The Cisco SN 5420 Storage Router provides universal access to storage over Internet Protocol (IP) networks. With the SN 5420 Storage Router, you can directly access storage anywhere on an IP network just as easily as you can access storage locally. All the robustness of the (TCP/IP) protocol suite, including security, availability, manageability, and quality of service (QoS), is available when you access storage. More importantly, the SN 5420 Storage Router enables the Small Computer Systems Interface over IP (iSCSI), which is the first storage networking implementation based on IP standards and interoperability.
For More Information See the SN 5420 Storage Router Web site: http://www.cisco.com/go/sn5420
Cisco SN 5420 Storage Router
1-47
CH A P T E R
2 CHAPTER 2
LAN Switching
Product
Features
Page
Catalyst 1900 Series
Fixed-configuration Ethernet switches • 12 or 24 10BASE-T ports • Uplinks: Two 100BASE-TX, one 100BASE-TX and one 100BASE-FX, or two 100BASE-FX • Cisco switch clustering enabled • Managed
2-6
Catalyst 2900 Series
Fixed-configuration Ethernet switches • 10/100 autosensing and autonegotiating interface • 1000BASE-X GBIC uplinks • Managed
2-8
Catalyst 2900 Series XL — Fixed Switches
Fixed-configuration 10/100 Ethernet switches
2-33
Catalyst 2948G-L3
Fixed-configuration Layer 3 (L3) Ethernet switch featuring wire-speed switching for Internet 2-10 Protocol (IP), Internetwork Packet Exchange (IPX), and IP multicast • Dedicated 48 ports of 10/100 Mbps Ethernet • Two ports of 1000BASE-X Gigabit Ethernet with gigabit interface converter (GBIC) support • Managed
Catalyst 2900 Series XL — Modular Switches
Modular 10/100 Ethernet switches • 12, 22, or 24 10/100 ports • 12 100BASE- FX ports (2912MF XL) • Two high-speed module slots accommodating 10/100, 100BASE-FX, Gigabit Ethernet (including 1000BASE-T), ATM, and GigaStack GBIC (2912MF XL and 2924M XL only) • Cisco switch clustering enabled • Managed
2-12
Catalyst 2950 Series
• Wire speed, high performance switch • Enhanced Quality of Service and multicast management capabilities • Low price per port
2-14
Catalyst 3500 Series XL
Fixed-configuration 10/100 and Gigabit Ethernet switches • 12, 24, or 48 10/100 ports with 2 GBIC-based Gigabit Ethernet ports • 24 ports with 2 GBIC-based Gigabit Ethernet ports with in-line power • 8 GBIC-based ports (3508G XL) • Stackable up to 9 switches with GigaStack GBIC • Cisco Switch Clustering capable • Managed
2-16
Catalyst 3550 -12T Series
Multilayer switch for network backbone or wiring closet top-of-the-stack aggregation using 2-18 Category 5 copper cabling • 1000BaseT solution that significantly improves network availability, scalability and security • Cisco IOS intelligent network services
Catalyst 4000 Series — Modular Configuration (4003 and 4006)
10/100/1000 Ethernet for wiring closet and sever switching with integrated WAN/Voice and 2-20 intelligent Enterprise Cisco IOS Services • Ethernet, Fast Ethernet and Gigabit Ethernet • Wire speed Layer 2 and Layer 3 switching • Up to 60 Gbps of switching capacity • Managed
LAN Switching Products at a Glance
2-1
LAN SWITCHING
LAN Switching Products at a Glance
Chapter 2
LAN Switching
Product
Features
Catalyst 4000 Series — Fixed Configuration (4912G and 4908G-L3)
Fixed Gigabit Ethernet switches for backbone and server switching with intelligent enterprise 2-23 Cisco IOS services • Dedicated Gigabit Ethernet • Wire speed Layer 2 or Layer 3 switching • Up to 24 Gbps of dedicated bandwidth • Managed
Page
Catalyst 4224 Access Gateway Switch
See Chapter 4—Campus IP Telephony, Video, and Web Collaboration for more information. 4-13
Catalyst 5000 Family
Modular switch that supports a broad range of interfaces for aggregation of legacy 2-25 technologies with IP technology • Ethernet, Fast Ethernet, Fast EtherChannel, Gigabit Ethernet, FDDI/CDDI, Token Ring, and ATM modules • Optional route switch module and NetFlow switching feature card for Layer 3 functionality • Managed
Catalyst 6000 Family
High-performance, multilayer switch with integrated intelligent services for enterprise campus backbones, server aggregation, or internet data centers • 10/100, 100FX Fast Ethernet, 1000BASE-T, 1000BASE-X, and Gigabit Ethernet modules • Layer 4-7 services • Up to 256 Gbps of switching capacity • Packet throughput scalable to 100+ Mpps • Managed
2-28
Catalyst 8500 Series
High-performance, modular, multimedia switch router • Wire speed, nonblocking IP, IPX, IP multicast Layer 3 switching • Multiple interface options • Managed
2-31
Additional LAN Switching Products Cisco 1548 Series Micro Switches 10/100
Fixed-configuration 10/100 Fast Ethernet switches • 8 autosensing 10/100 ports • Managed and unmanaged versions
Catalyst 3900 Series
Fixed and modular Token Ring switches 2-33 • 20 or 24 Token Ring ports • Stackable up to 8 switches • One FlexSlot accommodating additional Token Ring ports or ATM or ISL uplinks (Cisco 3900 only) • Managed
Cisco 1538 Series Micro Hubs 10/100
Fixed-configuration 10/100 Fast Ethernet hubs • 8 autosensing 10/100 ports • Managed and manageable versions • Part of the Cisco Networked Office stack family
2-34
FastHub 400 10/100 Series Repeaters
Modular 10/100 Fast Ethernet hubs • 12 and 24 autosensing 10/100 ports • Managed and manageable versions • Stackable up to 4 units • Optional switched uplink modules
2-34
LAN Switching Products at a Glance
2-2
2-33
Chapter 2
LAN Switching
Sample Switching Solution Overview—Enterprise LAN
CHAPTER 2 LAN SWITCHING
Sample Switching Solution Overview—Enterprise LAN
2-3
Chapter 2
LAN Switching
Cisco LAN and MAN Products Port Matrix
X
X
X
Fixed and Modular Ports
FastHub 400
Cisco 1538
Catalyst 8500
Catalyst 6000
Catalyst 5000
Catalyst 4000
Catalyst 3900
Catalyst 3550-12T
Catalyst 3500 XL
Catalyst 2950
Catalyst 2900 XL
Catalyst 2900
Cisco 1548 Fixed Ports Only
Hubs
Catalyst 1900
Switches
X X
X
X
X
Modular Ports Only
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Ports 10BASE-T Switched
X
X
X
X
X
10BASE-FL Switched 100BASE-T Switched
X
100BASE-F Switched
X
10/100 Autosensing Switched
X
X
X
X
X X
X
X
Shared 10BASE-T
X
Shared 10/100
X
Shared 100BASE-T
X
Token Ring
X
X
FDDI/CDDI
X
ATM
X
Gigabit Ethernet
X
Integrated In-Line Power
X
X X
X
X
X
Integrated Server Load Balancing
Cisco LAN and MAN Products Port Matrix
2-4
X
X
X
X
X
X
X X
X
Chapter 2
LAN Switching
Cisco Ethernet Switches Overview Cisco’s award-winning Catalyst switch family spans the entire user application spectrum, from cost-conscious desktop and workgroup switches to multilayer-capable switches for scalable enterprise applications in the wiring closet, data center, and backbone. The Cisco Catalyst line of switching solutions offers scalability, breadth, performance, and manageability.
• CiscoView GUI-based network management support, allowing easy point-and-click discovery of device status, statistics, and comprehensive per-port configuration and performance information • Web-based interface for installation and administration; Telnet and SNMP support for in-band and out-of-band management console • Cisco’s switch clustering technology enabling up to 16 interconnected Catalyst 1900, 2900 XL, and 3500 XL switches, regardless of geographical location, to form a flexible, single IP-managed network • Embedded RMON for four groups of RMON and a Switched Port Analyzer port, supporting a RMON probe for complete traffic monitoring • LEDs for monitoring the activities and status of the switches • IEEE 802.1d Spanning Tree for network loop detection and disabling, and for fault-tolerant connectivity • Cisco Discovery Protocol (CDP) to deliver network topology discovery and mapping, allowing devices to discover other Cisco devices on the network • Multicast address registration and packet filtering • Intranet multimedia and multicast support through the CGMP • VLANs ease network administration by enabling users to be logically grouped, regardless of physical location (Catalyst 1900, 2820, 2900, 2900 XL, 2950, 3500 XL, 3900, 4000, 5000, and 6000 families) –
Virtual Trunking Protocol (VTP) allows VLAN configuration changes made on one switch to be automatically updated to the other switches
–
Inter-Switch Link (ISL) protocol dynamically configures trunk ports between Catalyst switches
• Fast EtherChannel and Gigabit EtherChannel technologies provide bandwidth aggregation, which enable parallel bandwidth links between switches (Catalyst 1900, 2820, 2900 XL, 2948G-L3, 3500 XL, 4000, 4908G-L3, 5000, and 6000) Cisco Ethernet Switches Overview
2-5
LAN SWITCHING
Some of the key features of Cisco IOS software as it is supported by Catalyst Ethernet switches include the following:
CHAPTER 2
Cisco IOS software delivers advanced network services to Catalyst platforms and networked applications. Cisco IOS technologies, optimized for switching and available on all Catalyst switches, include Fast EtherChannel technology for bandwidth aggregation, Cisco Group Management Protocol (CGMP) support for optimized performance with multicast and multimedia traffic, and extensive management features. Cisco IOS software also provides support for virtual LAN (VLAN) configuration and management, IP address management, and secure access to network services.
Chapter 2
LAN Switching
Cisco Catalyst 1900 Series The Catalyst 1900 series switches, available in Standard and Enterprise editions, provide industry-leading performance and Cisco end-to-end network integration at an exceptionally affordable price. Enterprise edition software enables the Catalyst 1900 Series to deliver unprecedented network configuration flexibility and scalability through embedded Cisco IOS technologies, delivering comprehensive management and security, bandwidth optimization, networked multimedia, and virtual LAN (VLAN) support.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 1900 Series Standard Edition
• Lowest-cost switched Ethernet to individual desktops and 10BASE-T hubs • High-speed connections to 100BASE-T or 100BASE-FX backbones or servers • Software upgradable to Enterprise edition
Catalyst 1900 Series Enterprise Edition
• • • • • •
End-to-end Inter-Switch Link (ISL) VLANs Bandwidth aggregation with Fast EtherChannel technology Enhanced security with TACACS+ and multi-level console access Consistent management interface across Cisco product lines with Cisco IOS command-line interface (CLI) Dynamic multicast containment with Cisco Group Management Protocol (CGMP) Increased reliability via UplinkFast—Fast Layer 2 spanning-tree recovery is achieved by enabling the UplinkFast feature. If forwarding uplink is broken, UplinkFast puts blocking uplink into forwarding mode
Key Features • 1024 Media Access Control (MAC) address cache • Web-based interface for ease of installation, administration and management • CiscoWorks device-management support • Telnet and SNMP support for in-band management and a menu-driven, out-of-band management console • CGMP for dynamic and selective forward routed IP multicast traffic to target multimedia end stations, reducing overall network traffic and reducing network disruptions • Embedded RMON software agents that support four RMON groups and SPAN port for connection to RMON probe • Support for up to four overlapping bridge groups to manage bandwidth and provide added security through broadcast control • Cisco IOS CLI with Enterprise edition • Cisco’s switch clustering technology enables up to 16 interconnected Catalyst 1900, 2900 XL, and 3500 XL switches, regardless of geographic location, to form a flexible, single IP managed network
Competitive Products • 3Com: SuperStack Switch 1100
Cisco Catalyst 1900 Series
2-6
• Nortel: BayStack 303 & 304 switches
Chapter 2
LAN Switching
Specifications
12-port (10BASE-T) 24-port (10BASE-T) 1-port (AUI) 1-port (AUI) 2-port 100BASE-TX or 1-port 100BASE-TX and 1-port 2-port 100BASE-TX, 1-port 100BASE-TX and 1-port 100BASE-FX (1912C) 100BASE-FX (1924C), or 2-port 100BASE-FX (1924F)
Modular Slots
None
None
Backplane
1 Gbps
1 Gbps
Stackable
No
No
Full-Duplex Capabilities
Half/full duplex autonegotiated
Half/full duplex autonegotiated
VLAN Maximum
Up to 4 overlapping bridge groups or 1024 ISL VLANsUp to 4 overlapping bridge groups or 1024 ISL VLANs
FEC
Yes
Yes
ISL
Yes
Yes
Management Capabilities SNMP, out-of-band, Telnet, RMON, Cisco Visual
Catalyst 1924
LAN SWITCHING
Catalyst 1912
Fixed Ports (connections)
Same as Catalyst 1912
Switch Manager Web-based interface, CWSI, CiscoView, StackView/Stack Maker
Processor
80486 CPU
80486 CPU
Flash Memory
1 MB
1 MB
DRAM
2 MB
2 MB
Embedded RMON
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
Dimensions (HxWxD)
1.73 x 17.5 x 8.25 in.
1.73 x 17.5 x 8.25 in.
Selected Part Numbers and Ordering Information1 Catalyst 1900 Switch Family (Standard)1 WS-C1912-A WS-C1924F-A WS-C1912C-A WS-C1924-A WS-C1924C-A
12-port 10BASE-T, 2-port 100BASE-TX (Enterprise Upgradeable) 24-port 10BASE-T, 2-port 100BASE-FX 12-port 10BASE-T, 1-port 100BASE-TX, 1-port 100BASE-FX (Enterprise Upgradeable) 24-port 10BASE-T, 2-port 100BASE-TX- Enterprise Upgradeable 24-port 10BASE-T, 1-port 100BASE-TX, 1-port 100BASE-FX (Enterprise Upgradeable)
Catalyst 1900 Switch Family (Enterprise) WS-C1912-EN WS-C1912C-EN WS-C1924-EN WS-C1924C-EN WS-C1924F-EN
12-port 10BASE-T + 2-port 100BASE-TX (ISL, CGMP, RMON) 12-port 10BASE-T + 1-port 100BASE-TX + 1-port 100BASE-FX (ISL, CGMP, RMON) 24-port 10BASE-T + 2-port 100BASE-TX (ISL, CGMP, RMON) 24-port 10BASE-T + 1-port 100BASE-TX + 1-port 100BASE-FX (ISL, CGMP, RMON) 24-port 10BASE-T + 2-port 100BASE-FX
Catalyst 1900 Switch Bundles WS-C1924-EN-5PACK WS-C1924C-EN-5PACK
Five Catalyst 1924-EN Switches Five Catalyst 1924C-EN Switches
Catalyst 1900 Series Upgrade Kits WS-C19/28-EN WS-C19/28-IDEN
Catalyst 1900/2820 Enterprise Edition Upgrade Kit Catalyst 1900/2820 Enterprise Edition Upgrade Kit (10 pack)
Catalyst 1900 Series Basic Maintenance CON-SNT-PKG2 CON-SNT-PKG3 CON-SNT-PKG4
CHAPTER 2
Feature
Catalyst 1912-A, 1912C-A, 1912-EN SMARTnet Maintenance Catalyst 1912C-EN, 1924-A, 1924-EN, 1924C-A, 1924F-A SMARTnet Maintenance Catalyst 1924C-EN, 1924F-EN SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 1900 Web site: http://www.cisco.com/go/1900
Cisco Catalyst 1900 Series
2-7
Chapter 2
LAN Switching
Cisco Catalyst 2900 Series The Catalyst 2948G and 2980G deliver all the Ethernet switching needed for many small- to medium-sized wiring closets in a single system without the need for additional modules, cables or other interconnects. Utilizing the same industry-leading software and functionality of the Catalyst 4000, 5000, and 6000 families, the Catalyst 2948G and 2980G have consistent end-to-end services, which ensure complete interoperability with enterprise Catalyst switches.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 2980G Series
• • • •
Catalyst 2948G Series
• The same features as 2980G but up to 48 ports of wire-speed, non-blocking performance
A single box solution without additional cables, modules or configuration Up to 80 ports of wire-speed, non-blocking performance with large MTBF reliability End-to-end VLANs, EtherChannel, multicasting, and security Mature/proven Catalyst software compatibility in the wiring closet and data center
Key Features • Powerful non-blocking performance with proven Cisco IOS services • Wire speed 18 Million pps switching throughput • Intelligent multilayer IOS services (security, multicast, quality of service [QoS]) • Advanced multiple queue QoS architecture • Security (TACACS+, RADIUS, port lockdown) • Spanning-Tree Protocol (802.1D) with enhancements (UplinkFast, PortFast) for deterministic/fast failover • Redundant Power Supply (option)
Competitive Products • HP 4108gl • 3Com: SS3300
• Cabletron: SmartSwitch 6000 and 2200 • Nortel/Bay: BayStack 350T and 450T
Specifications Feature
Catalyst 2980G
Catalyst 2948G
Fixed Ports (connections)
80-port 10/100BASE-TX 2-port 1000BASE-X (GBIC)
48-port 10/100BASE-TX 2-port 1000BASE-X (GBIC)
Backplane
24 Gbps
24 Gbps
Stackable
No
No
Full-Duplex Capabilities
All ports
All ports
VLAN Maximum
1024
1024
FEC
Yes
Yes
ISL
No
No
Cisco Catalyst 2900 Series
2-8
Chapter 2
LAN Switching
Catalyst 2980G
Catalyst 2948G
802.1Q
Yes
Yes
Management Capabilities
CiscoWorks 2000, CWSI, CiscoView, CDP, VTP, CiscoWorks 2000, CWSI, CiscoView, CDP, VTP, Enhanced SPAN, SNMP, Telnet Client, BOOTP, TFTP Enhanced SPAN, SNMP, Telnet Client, BOOTP, TFTP
Processor Speed (Type)
200 MHz (R5000 RISC)
200 MHz (R5000 RISC)
Flash Memory
12 MB
12 MB
DRAM Memory
64 MB
64 MB
Embedded RMON
Statistics, history, alarms, events
Statistics, history, alarms, events
Dimensions (HxWxD)
3.5 x 17.5 x 17 in.
2.62 x 17.5 x 15 in.
RPS
Yes (WS-C2980G-A), RPS 300
Yes, RPS 600
CHAPTER 2
Feature
Selected Part Numbers and Ordering Information1
LAN SWITCHING
Catalyst 2900 Series Switches1 WS-C2948G WS-C2980G-A
Catalyst 2948G Switch,48 10/100Tx (RJ-45) +2 1000x (GBIC Slots) Catalyst 2980G Switch,80 10/100Tx (RJ-45) +2 1000x (GBIC Slots)
Catalyst 2900 Series Modules WS-G5484= WS-G5486= WS-G5487=
GBIC Module, fiber media SX GBIC Module, fiber media LX/LH GBIC Module, Fiber Media Zx
Mini-RMON Agent License WS-C2948G-EMS-LIC WS-C2980G-EMS-LIC
Catalyst 2948G RMON Agent License Catalyst 2980G RMON Agent Agreement
Catalyst 2900 Series Accessories WS-X2948G-RACK= WS-X2980G-RACK= PWR600-AC-RPS-CAB= PWR600-AC-RPS-NCAB= PWR300-AC-RPS-N1= CAB-RPS-1414=
Catalyst 2948G Rack Kit (spare) Catalyst 2980G Rack Kit (Spare) Redundant Power Supply (RPS), 600 Watts (2948G only) RPS 600 without Cable (2948G only) RPS 300 with one Cable (2980G-A only) One DC power cable for RPS 300
Catalyst 2900 Series Basic Maintenance CON-SNT-PKG8
Catalyst 2948 and 290G SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 2900 Web site: http://www.cisco.com/go/2900
Cisco Catalyst 2900 Series
2-9
Chapter 2
LAN Switching
Cisco Catalyst 2948G-L3 The Catalyst 2948G-L3 switch is a fixed-configuration Layer 3 (L3) Ethernet switch featuring wire-speed switching for Internet Protocol (IP), Internetwork Packet Exchange (IPX), and IP multicast. This new Catalyst switch provides the high-performance that is required for mid-size campus backbones with just the right port density. It is ideal for aggregating multiprotocol traffic from multiple wiring closets or workgroup switches such as the Catalyst 2900, Catalyst 3500, Catalyst 4000, or Catalyst 5000 switches.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 2948G-L3
• Cisco’s lowest priced Layer 3 backbone solution • Catalyst 2948G-L3 is ideal for backbone deployment in small to mid-size networks for those customers who need: – Wire speed Layer 3 performance but do not require high 10/100 Mbps Ethernet port counts or Gigabit Ethernet density – Cost effective feature-rich wire-speed routing and switching for IP, IPX and IP Multicast – Mature/proven Cisco IOS software compatibility in the backbone – Advanced QOS features to help manage bandwidth and protect mission critical applications
Key Features • Dedicated 48 ports of 10/100 Mbps Ethernet and two ports of 1000BASE-X Gigabit Ethernet with gigabit interface converter (GBIC) support; all ports with Layer 3 switching capability • Supports RIP I, RIP II, BGPv4, Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Protocol Independent Multicast (PIM) (dense and sparse), Hot Standby Router Protocol (HSRP) and Distance Vector Multicast Routing Protocol (DVMRP) interoperability • High-performance—More than 10 Mpps Layer 3 switching and routing of IP, IPX switches, and IP multicast • High-performance CPU with Cisco IOS software • Quality of service (QoS)—Multiple queues with weighted round robin (WRR) scheduling per port traffic policing and shaping • Fast Etherchannel and Gigabit Etherchannel • Comprehensive management tools based on standard CiscoWorks2000 applications • Optional redundant external power supply • Security—Access Lists on Gigabit ports
Competitive Products • Cabletron: Smart Switch Router 2000 • Extreme Summit 48
Cisco Catalyst 2948G-L3
2-10
• Hewlett-Packard: ProCurve 1600M • Nortel/Bay: Accelar 1100
Chapter 2
LAN Switching
Specifications Catalyst 2948G-L3
Fixed Ports
48-port 10/100BASE-TX, 2-port 1000BASE-X (GBIC) all Layer 3
Modular Slots
None
Available Modules
None
Backplane
22 Gbps
Stackable
No
Full Duplex Capabilities
All ports
VLAN Maximum
1024
FEC
Yes
ISL
Yes—All Ports
802.1Q
Yes—All Ports
Management Capabilities
CiscoWorks 2000, CWSI, CiscoView, CDP, VTP, Enhanced SPAN, SNMP, Telnet Client, BOOTP, TFTP
Processors
150 MHz (R5000 RISC)
Flash Memory
12 MB
DRAM
64 MB
Embedded RMON
Statistics, history, alarms, events
Dimensions (HxWxD)
2.69 x 17.1 x 18 in.
CHAPTER 2
Feature
Catalyst 2948G-L31 WS-C2948G-L3 FR2948GL3-IP= FR2948GL3-IPX= WS-G5484= WS-G5486= WS-G5487= CAB-GELX-625= PWR600-AC-RPS-NCAB CAB-RPSY-2218= STKRACKMOUNT1.5RU=
Catalyst 2948G-L3 switch, fixed 48 10/100 FE, 2 1000BASE-X (GBIC). Includes support for IP, IP multicast, and bridging. Note: GBIC module needs to be ordered separately. Catalyst 2948G-L3 Advanced IP switching License, Includes OSPF, IGRP, EIGRP Catalyst 2948G-L3 IPX switching License 1000BASE-SX GBIC module 1000BASE-LX/LH GBIC module 1000BASE-ZX GBIC module Gigabit Ethernet multimode conditioning cable 600W redundant AC power system without DC power cables RPS 22/18 two-to-one DC power cable Rack Mount Kit for 1.5RU Catalyst 2948G-L3
Mini-RMON Agent License WS-C2948G-EMS-LIC
Catalyst 2948G-L3 RMON Agent License
Catalyst 2948G-L3 Basic Maintenance CON-SNT-PKG8
Catalyst 2948G-L3 SMARTnet basic maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 2900 Web site: http://www.cisco.com/go/2900
Cisco Catalyst 2948G-L3
2-11
LAN SWITCHING
Selected Part Numbers and Ordering Information1
Chapter 2
LAN Switching
Cisco Catalyst 2900 Series XL — Modular Switches Cisco’s Catalyst 2900 Series XL is a full line of stand-alone, 10/100 autosensing Fast Ethernet switches that combine outstanding performance, ease of use, and integrated Cisco IOS software.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 2912MF XL
• All fiber switch to aggregate Fast Ethernet workgroups over 100BASE-FX connections in small and mid-size campus environments • High-speed uplinks to backbone or server via Fast Ethernet, Gigabit Ethernet, or ATM modules
Catalyst 2924M XL
• Any combination of dedicated 10-Mbps or 100-Mbps connections to individual PCs, servers, and other systems or connectivity between existing Ethernet and Fast Ethernet workgroups • The option to easily increase the switch’s port density and provide inexpensive high-speed uplinks through bandwidth aggregation (Fast EtherChannel and Gigabit EtherChannel technologies) • Gigabit Ethernet (including 1000BASE-T) and ATM interface modules for high-speed links • Hot swap insertion and removal of modules • Maximum flexibility
Key Features • Switch fabric of 3.2 Gbps, a forwarding rate of more than 3.0 million packets per second, and a maximum forwarding bandwidth of 1.6 Gbps, delivering wire-speed performance across all 10/100 ports • Support for IEEE 802.1p protocol for prioritization of mission-critical and time-sensitive applications such as voice and telephony traffic • Cisco’s switch clustering technology enables up to 16 interconnected Catalyst 1900, 2900 XL, and 3500 XL switches, regardless of geographic location, to form a flexible, single IP managed network • Up to 250 port-based VLANs or ISL/802.1Q trunks (64 for non-modular switches) • Network port allows operation in networks with unlimited MAC addresses • Autoconfiguration of multiple switches on a network from one boot server • Up to 4 Gbps bandwidth between routers, switches, and servers with Fast EtherChannel and Gigabit EtherChannel technologies
Competitive Products • 3Com: SuperStack II Switch 3300, SuperStack III 3300
• Nortel: BayStack 350 & 450 switches
Specifications Feature
Catalyst 2912 MF XL
Fixed Ports
12-port 100BASE-FX
Catalyst 2924M XL 24-port 10/100 autosensing
Modular Slots
2
2
Available Modules
4-port switched 10BASE-T/100BASE-TX autosensing Same as Catalyst 2912MF XL 2-port switched, 4-port 100BASE-FX 1-port Gigabit Ethernet (1000BASE-T or GBIC-based) 1-port ATM OC-3 (UTP, MM, medium & long reach)
Cisco Catalyst 2900 Series XL — Modular Switches
2-12
Chapter 2
LAN Switching
Feature
Catalyst 2912 MF XL
Catalyst 2924M XL
Backplane
3.2 Gbps
3.2 Gbps
Stackable
Yes
Yes
Full Duplex Capabilities
All 10BASE-T, 100BASE-TX, 100BASE-FX, 1000BASE-X, 1000BASE-T, and ATM ports
Same as Catalyst 2912MF XL
VLAN Maximum
250-port-based VLANs or ISL/802.1Q trunks
250-port-based VLANs or ISL/802.1Q trunks
FEC
Yes
Yes
Inter-Switched Link
Yes
Yes
Processors
Same as Catalyst 2912 XL
Same as Catalyst 2912 XL
Flash Memory
4 MB
4 MB
CPU DRAM
8 MB
8 MB
Embedded RMON
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
Dimensions (HxWxD)
3.46 x 17.5 x 12 in.
3.46 x 17.5 x 12 in.
LAN SWITCHING
Same as Catalyst 2912 XL
CHAPTER 2
Management Capabilities Same as Catalyst 2912 XL
Selected Part Numbers and Ordering Information1 Catalyst 2900 Series XL Switches1 WS-C2912MF-XL WS-C2924M-XL-EN WS-C2924M-XL-EN-DC
12-port 100BASE-FX, 2 module slots 24-port 10/100 (autosensing), 2 module slots 24-port 10/100 (autosensing), 2 module slots, DC powered
Catalyst 2900 Series XL Switch Bundles WS-C2924M-XL-EN-5P
Five Catalyst 2924M XL Switches
Catalyst 2900 Series XL Modules WS-X2914-XL-V WS-X2924-XL-V WS-X2922-XL-V WS-X2931-XL WS-X2932-XL WS-X2951-XL WS-X2961-XL WS-X2971-XL WS-X2972-XL WS-X3500-XL WS-G5484= WS-G5486=
4-port 10/100 ISL/802.1Q Module 4-port 100BASE-FX ISL/802.1Q Module 2-port 100BASE-FX ISL/802.1Q Module 1-port, GBIC-based, 1000BASE-X Switch Uplink Module 1-port 1000BASE-T Switch Uplink Module 1-port ATM-OC-3 UTP module 1-port ATM-OC-3 multimode fiber module 1-port ATM-OC-3 single mode fiber, medium reach module 1-port ATM-OC-3 single mode fiber, long reach module GigaStack GBIC SX GBIC; 1000BASE-SX short wavelength, multimode fiber LX GBIC; 1000BASE-LX/LH, long wavelength/long haul, single or multimode fiber
Catalyst 2900 Series XL Software WS-C2900-SA6-CM WS-C2900-SA6-EN WS-C2900-SA6-10EN
Catalyst 2900 XL Command Software Upgrade Catalyst 2900-XL Enterprise Edition Software Catalyst 2900-XL Enterprise Software, 10-system license
Catalyst 2900 Series XL Accessories WS-C2900-XL-EXPKT CAB-GS-1M CAB-GS-50CM
Four Fast EtherChannel cables, Application Note 1 meter cable for GigaStack GBIC 50 centimeter cable for GigaStack GBIC
Catalyst 2900 Series XL Basic Maintenance CON-SNT-PKG4
Catalyst 2912MF XL, and 2924M XL SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 2900 Series XL Web site: http://www.cisco.com/go/2900xl
Cisco Catalyst 2900 Series XL — Modular Switches
2-13
Chapter 2
LAN Switching
Cisco Catalyst 2950 Series The Catalyst 2950 Series is a family of wire-speed Fast Ethernet desktop switches that delivers the next generation of performance and functionality for the LAN with 10/100/1000BaseT uplinks, enhanced IOS service, quality of service (QoS), multicast management, high availability and security features using a simple, Web-based interface—CiscoCluster Management Suite software.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 2950-12
• Wire speed, high performance switch for connecting smaller Ethernet and/or Fast Ethernet workgroups or servers • Enhanced Quality of Service and multicast management capabilities • Low entry price
Catalyst 2950-24
• Wire speed, high performance switch for delivering 10Mbps or 100Mbps speed connectivity to desktop PCs, servers and other systems • Enhanced Quality of Service and multicast management capabilities • Low price per port
Catalyst 2950C-24
• Wire speed, high performance switch for delivering 10Mbps or 100Mbps speed connectivity to desktop PCs, servers and other systems • Enhanced Quality of Service and multicast management capabilities • High speed uplink flexibility over extended distances with 100BASE-FX connections using MT-RJ connectors • Low price per port
Catalyst 2950T-24
• Wire speed, high performance switch for delivering 10Mbps or 100Mbps speed connectivity to desktop PCs, servers and other systems • Enhanced Quality of Service and multicast management capabilities • High speed uplink flexibility with 10/100/1000BaseT ports • Low price per port
Key Features • Wire-speed performance in connecting end-stations to the LAN • Powerful migration path to Gigabit speeds while leveraging existing copper infrastructure • Sophisticated quality of service • Multicast Management via IGMP Snooping • Cisco Cluster Management (CMS) Software offers ease-of-use and ease-of-deployment • Superior manageability • Security and high availability • Enhanced Cisco IOS services • Support for Cisco Redundant Power System 300 (RPS 300)
Competitive Products • Hewlett Packard: Procurve 2500 Series
Cisco Catalyst 2950 Series
2-14
• 3 Com: Superstack 3 3300
Chapter 2
LAN Switching
Specifications Feature
Catalyst 2950-12
Catalyst 2950-24
Catalyst 2950C-24 Catalyst 2950T-24
Fixed Ports
12-port 10/100 autosensing
24-port 10/100 autosensing
26-port (24 10/100 autosensing & 2 ports100BaseFX)
Modular Slots
None
None
None
None
Backplane
8.8 Gbps
8.8 Gbps
8.8 Gbps
8.8 Gbps
Forwarding Rate
1.8 Mpps
3.6 Mpps
3.9 Mpps
6.6Mpps
Stackable
No
No
No
No
All ports
All ports
All ports
64-port-based VLANS
Same as Catalyst 2950-12 Same as Catalyst 2950-12 Same as Catalyst 2950-12
FEC
Yes
Yes
Yes
Yes
802.1Q
Yes
Yes
Yes
Yes
Multicast
IGMP Snooping
Same as Catalyst 2950-12 Same as Catalyst 2950-12 Same as Catalyst 2950-12
QoS
802.1P, 4 egress queues, Same as Catalyst 2950-12 Same as Catalyst 2950-12 Same as Catalyst 2950-12 WRR
Management Capabilities
SNMP, Telnet, RMON, CWSI, (CLI)-based out-of-band, embedded CMS
Same as Catalyst 2950-12 Same as Catalyst 2950-12 Same as Catalyst 2950-12
Flash Memory
8 MB
8 MB
8 MB
CPU DRAM
16 MB
16 MB
16 MB
16 MB
Embedded RMON
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
Dimensions (HxWxD)
1.72 x 17.5 x 9.52 in
1.75 x 17.5 x 11.8 in
1.75 x 17.5 x 11.8 in
1.75 x 17.5 x 16 in
8 MB
Selected Part Numbers and Ordering Information1 Catalyst 2950 Series Switches1 WS-C2950-12 WS-C2950-24 WS-C2950C-24 WS-C2950T-24
Catalyst 2950-12 switch with 12 10/100 ports Catalyst 2950-24 switch with 24 10/100 ports Catalyst 2950C-24 switch with 24 10/100 ports and two fixed 100BaseFX Uplink ports Catalyst 2950C-24T switch with 24 10/100 ports and two fixed 1000BaseT Uplink ports
Catalyst 2950 Series Accessories STK-RACKMOUNT-1RU=
Rack mount kit for Catalyst 2950
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 2950 Series Web site: http://www.cisco.com/go/cat2950
Cisco Catalyst 2950 Series
2-15
LAN SWITCHING
VLAN Maximum
CHAPTER 2
Full-Duplex Capabilities All ports
26-port (24 10/100 autosensing & 2 ports 1000BaseT
Chapter 2
LAN Switching
Cisco Catalyst 3500 Series XL The Cisco Systems Catalyst 3500 series XL is a scalable line of stackable 10/100 and Gigabit Ethernet switches that delivers premium performance, flexibility, and manageability with unparalleled investment protection. This line of low-cost, high-performance switching solutions provides next-generation stackable switching through an independent high-speed stacking bus that preserves valuable desktop ports. Cisco's breakthrough Switch Clustering technology expands the stacking domain beyond a single wiring closet, enabling up to 16 interconnected Catalyst 3550-12T, 3500 XL, 2950, 2900 XL and Catalyst 1900 switches-regardless of geographic location-to form a flexible, single IP managed network.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 3512 XL
• A high-performance, stackable, nonblocking switch for aggregating a small group of Catalyst 2900 XL or Catalyst 1900 switches in a clustered configuration • Low entry price
Catalyst 3524 XL
• A stackable, wire-speed 10/100 and Gigabit Ethernet switch for delivering dedicated 10 or 100 Mbps to individual users and servers • Built-in GBIC-based Gigabit Ethernet ports provide flexible and scalable uplinks or GigaStack GBIC stacking
Catalyst 3524-PWR XL
• A stackable, wire-speed 10/100 and Gigabit Ethernet switch for delivering dedicated 10 or 100 Mbps to individual users and servers • Advanced QoS, high availability, and integrated in-line power enabling IP telephony and other integrated voice, video, and data applications
Catalyst 3548 XL
• The highest density, stackable 10/100 and Gigabit Ethernet switch delivering 10 or 100 Mbps to users and servers, and dual Gigabit ports • Low per-port cost
Catalyst 3508G XL
• A stackable Gigabit Ethernet switch with eight GBIC-based ports for aggregating a group of Gigabit Ethernet switches and servers through Cisco GigaStack GBICs or standard 1000BASE-X GBICs • Dedicated, high-speed Gigabit Ethernet performance
Key Features • 10 Gbps switch fabric, up to 7.4 Mpps forwarding rate, and maximum forwarding bandwidth of 5 Gbps, for wire-speed performance across all 10/100 ports • Built-in Gigabit Ethernet ports accommodate a range of GBIC transceivers, including the Cisco GigaStack GBIC, 1000BASE-T, 1000BASE-SX and 1000BASE-LX/LH GBICs, and 1000BASE-ZX extended reach GBIC • Low-cost, 2-port Cisco GigaStack GBIC offers configurable stacking & performance options to deliver 1-Gbps connectivity in a daisy-chained connection or up to 2-Gbps in dedicated, switch-to-switch connection • Support for IEEE 802.1p technology for prioritization of mission-critical and time-sensitive application such as voice and telephony traffic • 3524-PWR XL provides in-line power to IP phones and other devices
Competitive Products • 3Com: SuperStack 3 Switch 3300, 3900, and 9300 • Hewlett Packard: ProCurve 2524, 2424M, 4000, and 8000
Cisco Catalyst 3500 Series XL
2-16
• Nortel: BayStack 450T switches
Chapter 2
LAN Switching
Specifications Catalyst Catalyst 3512 XL Catalyst 3524 XL 3524-PWR XL
Catalyst Catalyst 3548 XL 3508G XL
Fixed Ports
12-port 10/100 autosensing 2-port 1000BASE-X (GBIC)
48-port 10/100 autosensing 2-port 1000BASE-X (GBIC)
Modular Slots
None
None
None
None
None
Backplane
10 Gbps
10 Gbps
10 Gbps
10 Gbps
10 Gbps
Stackable
Yes
Yes
Yes
Yes
Yes
Full-Duplex
All ports
All ports
All ports
All ports
All ports
VLAN Maximum
250-port-based VLANs Same as or ISL/802.1Q trunks Catalyst 3512 XL
Same as Catalyst 3512 XL
Same as Catalyst 3512 XL
Same as Catalyst 3512 XL
FEC
Yes
Yes
Yes
Yes
Yes
Inter-Switch Link
Yes
Yes
Yes
Yes
Yes
In-Line Power
No
No
Yes
No
No
Management Capabilities
SNMP, Telnet, RMON, Same as CWSI, (CLI)-based Catalyst 3512 XL out-of-band, embedded Cisco Visual Switch Manager, Web-based interface
Same as Catalyst 3512 XL
Same as Catalyst 3512 XL
Same as Catalyst 3512 XL
Processors
Cisco designed ASICs Cisco designed ASICs Cisco designed ASICs Cisco designed ASICs Cisco designed ASICs
Flash Memory
4 MB
4 MB
4 MB
4 MB
4 MB
CPU DRAM
8 MB
8 MB
8 MB
8 MB
8 MB
Embedded RMON
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
History, Events, Alarms, Statistics
Dimensions (HxWxD)
1.75 x 17.5 x 11.8 in
1.75 x 17.5 x 11.8 in
1.75 x 17.5 x 11.8 in
1.75 x 17.5 x 16 in
1.75 x 17.5 x 11.8 in
Feature
24-port 10/100 autosensing 2-port 1000BASE-X (GBIC)
24-port 10/100 autosensing 2-port 1000BASE-X (GBIC)
8-port 1000BASE-X (GBIC)
WS-C3512-XL-EN WS-C3524-XL-EN WS-C3548-XL-EN WS-C3524-PWR-XL-EN WS-C3508G-XL-EN
12-port 10/100 (autosensing), 2 1000X GBIC Slots 24-port 10/100 (autosensing), 2 1000X GBIC Slots 48-port 10/100 (autosensing), 2 1000X GBIC Slots 24-port 10/100 (autosensing), 2 1000X GBIC Slots, inline power 8 1000X GBIC Slots (Enterprise Edition)
Catalyst 3500 Series XL Accessories WS-X3500-XL WS-G5484= WS-G5486= WS-G5487= WS-G5482
GigaStack GBIC 1000BASE-SX GBIC 1000BASE- LX/LH GBIC 1000BASE- ZX extended reach GBIC 1000BASE-T GBIC
Catalyst 3500 Series XL Basic Maintenance CON-SNT-PKG4 CON-SNT-PKG5 CON-SNT-PKG6 CON-SNT-PKG9
Catalyst 3512 XL SMARTnet Maintenance Catalyst 3524 XL and 3524-PWR XL SMARTnet Maintenance Catalyst 3548 XL SMARTnet Maintenance Catalyst 3508G XL SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 3500 series XL Web site: http://www.cisco.com/go/3500xl
Cisco Catalyst 3500 Series XL
2-17
LAN SWITCHING
Catalyst 3500 Series XL Switches1
CHAPTER 2
Selected Part Numbers and Ordering Information1
Chapter 2
LAN Switching
Cisco Catalyst 3550-12T Series The Catalyst 3550-12T Gigabit Ethernet multilayer switch allows network managers to increase control of their local-area networks (LANs) by combining the power of Cisco IOS Intelligent Network Services with the simplicity of Web-based management. The Catalyst 3550-12T switch is a component of the Cisco Gigabit Ethernet over copper solution.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 3550-12T
• • • •
1000BaseT solution Network backbone or wiring closet top-of-the-stack aggregation using Category 5 copper cabling Significantly improve network availability, scalability and security Cisco IOS intelligent network services
Key Features • 10 Gigabit Ethernet 10/100/1000BaseT ports, 2 GBIC ports • 1 1/2 rack unit Gigabit Ethernet multilayer switch for use with high-performance end stations or server farm aggregation • Advanced Layer 3 Quality of Service (QoS) • Sophisticated traffic management • High-performance IP routing in either the backbone or at the top of the stack • Ease-of-use and ease-of-deployment • Dynamic IP routing at 17 Mpps forwarding rate • Ultra flexible and scalable Switch Clustering technology to enable single IP management of up to 16 interconnected Catalyst 3550-12T, 2950, 3500 XL, 2900 XL, 2900 LRE XL and 1900 Switches • Integrated Cisco IOS Intelligent Network Services • Superior manageability • Security and high availability
Competitive Products • Extreme Networks: Summit5i
• 3Com: SuperStack 3 4900
Specifications Feature
Catalyst 3550-12T
Fixed Ports
10-port 10/100/1000 2-port 1000BaseX GBIC (All Layer 2/Layer 3)
Modular Slots
None
Backplane
24 Gbps
Stackable
Yes
Full-Duplex Capabilities
All ports
Cisco Catalyst 3550-12T Series
2-18
Chapter 2
LAN Switching
1,024
FEC/GEC
Yes/Yes
GBICs
Gigastack, 1000BaseT, SX, LX/LH, ZX
802.1Q
Yes
ISL
Yes
In-Line Power
No
QoS
802.1p, DSCP, 4 egress Queues, WRR, WRED
Multicast
IGMP Snooping, PIM, DVMRP, CGMP Server
Management Capabilities
SNMP, Telnet, RMON, CWSI, CLI-based out-of-band, embedded Cluster Management Suite
Flash Memory
8 MB
CPU DRAM
32 MB
Embedded RMON
History, Events, Alarms, Statistics
Dimensions (HxWxD)
2.63 x 15.9 x 17.5 in
LAN SWITCHING
Catalyst 3550-12T
VLAN Maximum
Selected Part Numbers and Ordering Information1 Catalyst 3550-12T
1
WS-C3550-12T
Catalyst 3550-12T multilayer switch with 10-port 10/100/1000BaseT and two fixed GBIC-based 1000BaseX uplinks
Gigabit Interface Converters (GBICs) WS-X3500-XL WS-G5484= WS-G5486= WS-G5487= WS-G5482
GigaStack Stacking GBIC and 50 cm cable 1000BaseSX GBIC-short wavelength GBIC (multimode fiber only) 1000BaseLX/LH GBIC-long wavelength/long haul GBIC (single or multimode fiber) 1000BaseZX GBIC-extended reach GBIC (singlemode fiber only) 1000BaseT GBIC-Gigabit Ethernet over Copper GBIC
SMARTnet Maintenance Package for 2-Tier Customers CON-SNT-PKG9 CON-SNTE-PKG9 CON-SNTP-PKG9
SMARTnet 8x5xNBD Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports SMARTnet Enhanced 8x5x4 Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports SMARTnet Premium 24x7x4 Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports
SMARTnet Maintenance Package for Direct Customers CON-SNT-C3550-12T CON-SNTE-C3550-12T CON-SNTP-C3550-12T
CHAPTER 2
Feature
SMARTnet 8x5xNBD Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports SMARTnet Enhanced 8x5x4 Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports SMARTnet Premium 24x7x4 Service for Catalyst 3550-12T switch with 10 Gigabit Ethernet 10/100/1000BaseT ports and 2 GBIC ports
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 3550-12T series Web site: http://www.cisco.com/go/cat3550
Cisco Catalyst 3550-12T Series
2-19
Chapter 2
LAN Switching
Cisco Catalyst 4000 Series — Modular Configuration The Catalyst 4003 and 4006 are cost-effective modular chassis that deliver the benefits of a converged wiring closet to every user in an enterprise or branch office. New Catalyst 4000 Family capabilities include integrated LAN/WAN, voice services, high density 100-FX and high density auto-sensing 10/100/1000. The Catalyst 4000 Family is designed to integrate the features/performance required in today's wiring closets, and at the same time protect the seamless introduction of tomorrow's enterprise enhancements.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 4006
• Fast Ethernet Port density up to 240 10/100 or 100-FX ports with modular investment protection
Catalyst 4003
• Fast Ethernet Port density up to 96 10/100 or 100-FX ports with modular investment protection
Note: Compatible sparing between Catalyst 4003 and 4006 chassis provides investment protection with commonality of power supplies and switching line cards, thus lowering the total cost of ownership. The Catalyst 4000 family also leverages the same feature set with identical software code base along with the same enterprise functionality as the Catalyst 6000 Series in the wiring closet, delivering a consistent end-to-end solution.
Key Features • Catalyst 4000/5000/6000 Family Enterprise Software, single IP-Address Management, and security (TACACS+, port lockdown, RADIUS, Kerberos) • Enterprise VLANs (1,024) with 802.1Q support on all ports, 16,000 MAC Addresses, and Spanning-Tree Protocol (802.1D) enhancements (UplinkFast, PortFast, and BackboneFast) for deterministic/fast failover • Fast and Gigabit EtherChannel aggregation (up to 8 Gbps), load balancing and failover on every port, and port filtering • High Density Auto-Sensing 10/100/1000BASE-T • LAN/WAN and voice integration Layer 3 Multi-protocol Router/QoS Switching Linecard Features: • 8 Gbps capacity layer 3 switching 6 Mpps layer 3 Switching and Routing of IP, IPX, IP Multicast, AppleTalk, and BGP4 • Supports RIP I, RIP II, Open Shortest Path First (OSPF), Interior Gateway Routing Protocol (IGRP) Enhanced IGRP (EIGRP), DHCP Relay, Hot Standby Router Protocol (HSRP), Cisco Group Management Protocol (CGMP), Internet Control Message Protocol (ICMP), and both Protocol Independent Multicast (PIM) sparse and dense modes, and Distance Vector Multicast Routing Protocol (DVMRP) interoperability • Quality of Service-multiple queues with Weighted Round Robin (WRR) scheduling and traffic shaping and traffic policing • Security-Hardware-based access control lists supported on dual Gigabit Ethernet uplinks (standard and extended) • ISL on Gigabit Ethernet ports Cisco Catalyst 4000 Series — Modular Configuration
2-20
Chapter 2
LAN Switching
Competitive Products • Extreme Networks: Summit 48, Alpine 3804, and Alpine 3808 • Enterasys: Matrix E-5, Matrix E-7
• Nortel Networks: BayStack 450T • Hewlett Packard: Procurve 4108GL
Specifications Catalyst 4003
Catalyst 4006
Fixed Ports
None
2 Gigabit uplink ports on Supervisor Engine II
Maximum Port Density
96 (10/100 Ethernet) 96 (100FX Ethernet) 48 (10/100/1000BASE-T)
240 (10/100 Ethernet) 240 (100FX Ethernet) 120 (10/100/1000BASE-T)
Modular Slots
3 (1 for Supervisor)
6 (1 for Supervisor)
Available Modules
Supervisor Engine 1
Supervisor Engine II
Backplane Capacity
24 Gbps
60 Gbps
Stackable
No
No
Hot-Swappable Power Supplies
2 bays (1 required, 1 for redundancy)
3 bays (2 required, 1 for redundancy)
VLAN Maximum
1,024
1,024
802.1Q
Yes (on all ports)
Yes (on all ports)
ISL
Yes (L3 Module)
Yes (L3 Module)
Management Capabilities
Inboard console via terminal or modem, outboard Same as Catalyst 4003 via Telnet, SNMP, CiscoView, CWSI, CiscoWorks 2000
Embedded RMON
Statistics, History, Alarm, Events
Same as Catalyst 4003
Dimensions (HxWxD)
10.5 x 17.25 x 12 in.
17.5 x 17.25 x 12 in.
CHAPTER 2
Feature
LAN SWITCHING
Selected Part Numbers and Ordering Information1 Catalyst 4000 Series Switches1 WS-C4003-S1-82 WS-C4003-S1 WS-C4006-S2 WS-C4003= WS-C4006=
Catalyst 4003 Bundle. Common Equipment with 80-10/100 FE (RJ-45) and 2 1000 GE (GBIC) Catalyst 4003 Chassis (3-Slot), Supervisor Engine 1, 1-AC Power Supply, Fan Tray, Rack-Mount Kit Catalyst 4006 Chassis (6-Slot), Supervisor II, (2)AC Power Supplies, Fan Tray, Rack-Mount Kit Catalyst 4000 Chassis (3-Slot), Single AC Power Supply (Spare) Catalyst 4006 Chassis (6-Slot), 2 AC PS, Fan Tray (Spare)
Catalyst 4000 Series Common Equipment WS-X4004= WS-X4005= WS-X4008= WS-X4012= WS-X4013= WS-X4019= WS-X4095-PEM= WS-X4098= WS-X4099= WS-X4608= WS-P4603= WS-U4604-DSP=
Catalyst 4003 Fan Tray (Spare) Catalyst 4006 Fan Tray (Spare) Catalyst 4003/4006 AC Power Supply (Spare) Catalyst 4003 Supervisor Engine I, Console (DB-25), Mgt. (RJ-45) (Spare) Catalyst 4006 Supervisor Engine II, Console (RJ-45), Mgt. (RJ-45) (Spare) Catalyst 4006 Backplane Channel Module (Spare) Catalyst 4000 DC Power Entry Module (Spare) Catalyst 4006 Rack-Mount Kit (Spare) Catalyst 4003 Rack-Mount Kit (Spare) Catalyst 4603 Power Supply Unit for WS-P4603 Catalyst 4000 Aux. Power Shelf (3 slot) (spare) Catalyst 4000 DSP Set, 4x6 SIMMs for WS-X4604-GWY=
Catalyst 4000 Series Line Card Modules and GBICs WS-X4124-FX-MT= WS-X4424-GB-RJ-45= WS-X4148-RJ= WS-X4148-RJ21= WS-X4148-RJ45V= WS-X4148-FX-MT= WS-X4232-GB-RJ= WS-X4232-RJ-XX= WS-X4232-L3=
Catalyst 4000 FE Switching Module, 24-port 100FX (MTRJ) Catalyst 4000 24 port 10/100/1000 Auto-Sensing Module (RJ45) Catalyst 4000 10/100 Fast Ethernet Module, 48 Ports (RJ-45) Catalyst 4000 Telco switch module, 48-port 10/100 (4xRJ21) Catalyst 4000 Inline Power 10/100, 48-port (RJ45) Catalyst 4000 FE Switching Module, 48-100FX MMF (MTRJ) Catalyst 4000 E/FE/GE Module, 2-GE (GBIC), 32-10/100 FE (RJ-45) Catalyst 4000 FE Base Module, 32-10/100(RJ45)+ Modular Uplink slot Catalyst 4000 E/FE/GE L3 Module, 2-GE(GBIC), 32-10/100 (RJ45)
Cisco Catalyst 4000 Series — Modular Configuration
2-21
Chapter 2
WS-X4306-GB= WS-X4418-GB= WS-U4504-FX-MT= WS-X4412-2GB-T= WS-X4604-GWY= WS-G5484= WS-G5486= WS-G5487=
LAN Switching
Catalyst 4000 Gigabit Ethernet Module, 6 Ports (GBIC) Catalyst 4000 GE Module, Server Switching 18 Ports (GBIC) Catalyst 4000 FE Uplink Daughter Card, 4-port 100FX (MTRJ) Catalyst 4000 GE Module, 12-1000T (RJ45)+2-1000X (GBIC Slot) Catalyst 4000 Access Gateway Module with IP/FW software 1000BASE-SX Shortwave GBIC Module (Multimode Only) 1000BASE-LX/LH Long Haul GBIC Module (Multimode or Single Mode) 1000 BASE-ZX GBIC module (Single Mode Only)
Catalyst 4000 Series Software S4KAGMCH-12103XI= S4KAGMCU-12103XI= FL4KAGM-CH-CU= FR4232-L3-IP= FR4232-L3-IPX= WS-C4006-EMS-LIC WS-C4003-EMS-LIC
Catalyst 4000 AGM IOS IP/Firewall Feature set Catalyst 4000 AGM IOS IP/FW/DSP Plus Feature set Catalyst 4000 AGM IOS upgrade IP/FW to IP/FW/DSP Plus Enhanced IP License IPX License Catalyst 4006 RMON Agent License Catalyst 4003 RMON Agent License
Catalyst 4000 Series Access Gateway Module Interface Cards VIC-2BRI-S/T-TE= VIC-2FXO= VIC-2FXO-EU= VIC-2FXS= VWIC-2MFT-E1-DI= VWIC-2MFT-T1-DI= WIC-1DSU-56K4= WIC-2A/S=
Two-port Voice Interface Card—BRI (Terminal) Two-port Voice Interface Card—FXO-Spare Two-port Voice Interface Card—FXO (for Europe) Two-port Voice Interface Card—FXS-Spare 2-Port RJ-48 Multiflex Trunk—E1 With Drop and Insert 2-Port RJ-48 Multiflex Trunk—T1 With Drop and Insert 1-Port 4-Wire 56Kbps DSU/CSU WAN Interface Card 2-Port Async/Sync Serial WAN Interface Card spare
Catalyst 4000 SeriesBasic Maintenance CON-SNT-PKG11 CON-SNT-PKG12
Catalyst 4003 SMARTnet Basic Maintenance Catalyst 4006 SMARTnet Basic Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 4000 series Web site: http://www.cisco.com/go/cat4000
Cisco Catalyst 4000 Series — Modular Configuration
2-22
Chapter 2
LAN Switching
Cisco Catalyst 4000 Series — Fixed Configuration
Sell This Product When a Customer Needs These Features Catalyst 4908G-L3
• Cisco’s lowest priced dedicated Gigabit Ethernet Layer 3 backbone solution ideal for backbone deployment in small to mid-size networks for those customers who need wire speed Layer 3 performance but do not require Gigabit Ethernet density over 8 ports • Small server farm aggregation where Layer 3 services are required; cost effective wire-speed routing and switching for IP, IPX and IP Multicast; Cisco IOS Software compatibility in the backbone, advanced QOS features to help manage bandwidth and protect mission critical applications
Catalyst 4912G
• Advanced wirespeed, non-blocking Layer 2 Gigabit Ethernet performance with intelligent Cisco IOS services and high-speed connections to workstations or servers; flexible Gigabit Interface Converter (GBIC) interfaces on all ports
Key Features • Catalyst 4908G-L3: –
8 ports of 1000BASE-X Gigabit Ethernet with GBIC support; Layer 3 switching and routing of IP, IPX, and IP Multicast with wire-speed Layer 2 switching for non-routable protocols; Gigabit Etherchannel capability on every port
–
RIP I, RIP II, BGPv4, Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Protocol Independent Multicast (PIM) (dense and sparse), Hot Standby Router Protocol (HSRP) and Distance Vector Multicast Routing Protocol (DVMRP) interoperability
–
High Performance CPU with proven Cisco IOS Software, security (Access Lists, TACACS+, RADIUS), and Quality of Service—multiple queues with Weighted Round Robin (WRR) scheduling per port traffic policing and shaping
• Catalyst 4912G: –
Wire-speed performance with 24 Gbps of dedicated bandwidth for nonblocking Gigabit Ethernet concentration, broad Gigabit EtherChannel availability, and GBIC flexibility on fiber port interfaces covering a wide range of cabling distances
–
Catalyst 5000 Family software compatibility; redundant, hot-swappable external power supply (option) and other fault-tolerant features
Cisco Catalyst 4000 Series — Fixed Configuration
2-23
LAN SWITCHING
When to Sell
CHAPTER 2
Cisco offers two dedicated Gigabit Ethernet fixed configuration switches; the Catalyst 4908G-L3 and the Catalyst 4912G. The Catalyst 4908G-L3 Switch is a fixed configuration Layer 3 Ethernet switch featuring wire-speed switching for IP, IPX, IP Multicast. The Catalyst 4908G-L3 provides the high performance required for midsize campus backbones with optimum port density. It is ideal for aggregating multiprotocol traffic from multiple wiring closets or workgroup switches such as the Catalyst 2900, Catalyst 3500, Catalyst 4000, and Catalyst 5000. The Catalyst 4912G offers 12-port dedicated Layer 2 Gigabit Ethernet switching.
Chapter 2
LAN Switching
Competitive Products • Cabletron: SSR2100 • Extreme Networks: Summit 1
• Foundry: Turbo Iron 8 • Nortel: Accellar 1200
Specifications Feature
Catalyst 4908G-L3
Catalyst 4912G
Fixed Ports
8 (All Layer 3)
12 (All Layer 2)
Modular Slots
—
—
Available Modules
—
—
Backplane Capacity
22 Gbps
24 Gbps
Stackable
No
No
VLAN Maximum
244
244
802.1Q
Yes
Yes
ISL
Yes
No
Management Capabilities
Inboard console via terminal or modem, outboard Same as Catalyst 4908G-L3 via Telnet, SNMP, CiscoView, CWSI, CiscoWorks 2000
Embedded RMON
Statistics, History, Alarm, Events
Same as Catalyst 4908G-L3
Dimensions (HxWxD)
2.69 x 17.1 x 18 in.
2.75 x 17.5 x 15 in.
Selected Part Numbers and Ordering Information1 Catalyst 4000 Switch Family1 WS-C4908G-L3 FR4908GL3-IPX= WS-C4912G WS-G5484= WS-G5486= WS-G5487= STKRACKMOUNT1.5RU= WS-X4912G-RACK= PWR600-AC-RPS-NCAB CAB-RPSY-2218=
Catalyst 4908G-L3 switch, 8 port 1000BASE-X L3 Switch (GBIC). Note: GBIC modules need to be ordered separately Catalyst 4908G-L3 IPX switching License Catalyst 4912G switch, fixed 12-ports switched 1000BASE-X (GBIC) 1000BASE-SX GBIC module 1000BASE-LX/LH GBIC module 1000BASE-ZX GBIC module Rack Mount Kit for 1.5RU Catalyst 4908G-L3 Catalyst 4912G rack-mount kit (spare) 600W redundant AC power supply without DC power cables RPS 22/18 two-to-one DC power cable
Mini-RMON Agent License WS-C4900-EMS-LIC= WS-C4912G-EMS-LIC WS-C4908G-EMS-LIC
RMON License Catalyst 4912G RMON Agent License Catalyst 4908G-L3 RMON Agent License
Catalyst 4000 Basic Maintenance CON-SNT-PKG12
Catalyst 4908G-L3 and 4912G SMARTnet Basic Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 4000 series Web site: http://www.cisco.com/go/cat4000
Cisco Catalyst 4000 Series — Fixed Configuration
2-24
Chapter 2
LAN Switching
Cisco Catalyst 5000 Family
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 5500
• • • •
Catalyst 5505
• Gigabit Ethernet (high-performance desktop/server connectivity) • Full system redundancy • Five slots—up to 192 10BASE-T ports or 144 10/100 ports
Catalyst 5509
• • • •
Catalyst 8510 features and line-card support Gigabit Ethernet Full system redundancy High density (13 slots—up to 528 10BASE-T ports or 396 10/100 ports)
High-performance desktop/server switching Full system redundancy High-density Gigabit Ethernet up to 38 ports Nine slots—up to 384 10BASE-T ports or 288 10/100 ports
Key Features • High-speed connectivity using standard Gigabit Ethernet, Fast Ethernet, Token Ring, FDDI, or ATM • Multilayer switching • Dual redundant switching engines, power supplies, and a passive backplane design ensure full system redundancy for mission-critical environments • Fast EtherChannel or Gigabit EtherChannel support • Support for all advanced features of Cisco IOS software • Any-to-any switching (that is, any media to any media—Token Ring to ATM, Gigabit to ATM, FDDI to ATM, and so forth) • Cisco’s VTP supports dynamic VLANs and dynamic trunk configuration across all switches
Cisco Catalyst 5000 Family
2-25
LAN SWITCHING
The Catalyst 5000 family supports multiprotocol NetFlow Switching for scalable convergence of Layer 2 and Layer 3 switching, adding the benefits of multiprotocol, multilayer switching and other Cisco IOS network services. The 24-port 100BASE-FX SMF module provides high density, low cost, extended range connectivity for service providers. The QoS classification and WRED capabilities of this new module allow service providers to deliver differentiated services over the MAN.
CHAPTER 2
The Catalyst 5000 family features a Gigabit Ethernet and ATM-ready platform offering users high-speed trunking technologies, including Fast EtherChannel and OC-12 ATM. This series also provides a redundant architecture, dynamic VLANs, complete intranet services support, and media-rate performance with a broad variety of interface modules.
Chapter 2
LAN Switching
Competitive Products • Enterasys: Matrix E7, Expedition ER16 • Nortel: Passport 8100, 8600
• Extreme: Black Diamond • Foundry: Big Iron
Specifications Feature
5500
5505
5509
Modular Slots
13
5
9
Available Modules
Supervisor1 Engine II G, III G, or III plus any combination of Same as Catalyst 5500 Same as Catalyst 5500 modules (subset listed under Part Numbers and Ordering Information)
Backplane
3.6 Gbps ATM switching: 5-Gbps backplane
Stackable Full-Duplex Capabilities
3.6 Gbps
3.6 Gbps
No
No
No
All Ethernet, Fast Ethernet, Token Ring, and ATM ports
Same as Catalyst 5500 Same as Catalyst 5500
VLAN Maximum
Spanning tree: Yes per VLAN; 1000 VLANs
Same as Catalyst 5500 Same as Catalyst 5500
FEC
100BASE-TX; 100BASE-FX; 1000 BASE-X
Same as Catalyst 5500 Same as Catalyst 5500
Management Capabilities Inboard console via terminal or modem, outboard via Telnet, Same as Catalyst 5500 Same as Catalyst 5500 SNMP, CiscoView, CWSIStatistics, history, alarms, events
Dimensions (HxWxD)
25.25 x 17.3 x 18.25 in.
10.4 x 17.2 x 18.14 in. 20 x 17.25 x 18.14 in.
1. Supervisor module(s) require a slot in the chassis.
Selected Part Numbers and Ordering Information1 Catalyst 5000 Family Switch Families1 WS-C5507= WS-C5505-CHAC= WS-C5509-CHAC= WS-C5509-CHDC=
13-slot Chassis, AC Power Supply Catalyst 5505 Chassis, AC Power Supply Catalyst 5509 Spare Chassis, AC Power Supply Catalyst 5509 Spare Chassis, DC Power Supply
Catalyst 5000 Supervisor Engine II Modules WS-X5540= WS-X5509-BOOT= WS-X5530-BOOT=
Catalyst 5000 Family Supervisor Engine II G, with modular uplinks Catalyst 5000 Family Sup Eng II Boot ROM Kit Catalyst 5000 Family Sup Eng III Boot ROM Kit
Catalyst 5000 Supervisor Engine III Modules WS-X5530-E3A= WS-F5531A= WS-U5534-GESX= WS-U5536-GELX= WS-U5535-FEFX-SMF= WS-U5537-FETX= WS-X5550= WS-U5532-GBIC=
Supervisor Engine III with NFFC II-A - modular uplink slot Netflow Feature Card NFFC II-A (spare) 2-port 1000BASE-SX (SC) Module (for Sup Eng III) 2-port 1000BASE-LX (SC) Module (for Sup Eng III) 2-port 100BASE-FX (single mode fiber) Module (for Sup Eng III) 4-port 10/100BASE-TX Module (for Sup Eng III) Catalyst 5000 Family Sup Eng III G, with GBIC uplinks Dual Port GBIC uplink w/ QoS for Supervisor III & IIG
Catalyst 5000 Family Modules WS-X5012A= WS-X5030= WS-X5031= WS-X5104= WS-X5157= WS-X5162= WS-X5165= WS-X5168= WS-X5201R= WS-X5225R= WS-X5236-FX-MT WS-X5237-FX-MT= WS-X5239-RJ21 WS-X5381= WS-X5403=
48-port 10BASE-T Switching Module (RJ-21) 16-port Token Ring Switch Module (copper) 16-port Token Ring Switch Module (fiber) 1-port FDDI Switching Module (SMF, ST) (also available in FDDI MMF MIC and CDDI UTP RJ-45) 2-port ATM LANE Module (Dual Phy, SC, SMF) (also available in MMF) 1-port ATM, OC-12 Module (Dual Phy, SMF) (also available in MMF) Catalyst 5500 ATM Fabric Integration Module 1-port ATM OC-3 LANE/MPOA (Dual PHY, SMF, SC) (also available in MMF) 12-port 100BASE-FX Backbone Switching Module (SC, MMF) 24-port 10/100 (autosensing) Backbone Switching Module (RJ-45) (also available with QoS) 24-port 100FX Switching Module (FEC,WRED,802.1Q/ISL,MT-RJ) 24-port 100FX SMF MT-RJ Switching Module (FEC, 802.1Q/ISL, WRED) 36-port 10/100 (autosensing) QoS Switching Module (RJ-21) Catalyst 5000/5500 Network Analysis Module, RMON.RMON2/NetFlow 3-port Gigabit Ethernet Switching Module (GBIC) (also available in 9-port)
Cisco Catalyst 5000 Family
2-26
Chapter 2
LAN Switching
WS-G5486= WS-C5514-CL= MEM-C5K-128M-UPGD= MEM-C5K-NAM-UPGD=
1000BASE-LX/LH (long wavelength/long-haul) GBIC (available in extended ZX SM & short SX MM) Catalyst 5505/5509 Backplane Clock Module (spare) Catalyst 5000 128 MB upgrade for RSFC C5000/5500 Network Analysis Module 128 MB DRAM upgrade
Catalyst 5000 RSM/Route Switch Feature Cards WS-X5302= WS-X5303-15= WS-X5303-40= WS-X5541=
Catalyst 5000 Route Switch Module Catalyst 5000 Versatile Interface Processor Model 2-15 Catalyst 5000 Versatile Interface Processor Model 2-40 Catalyst 5000 Route Switch Feature Card for Sup II G and Sup III G
Catalyst 5000 Family Memory MEM-C5K-SUP3-UPGD=
C5000 Supervisor Engine III 64 MB DRAM upgrade kit (spare)
MEM-S3-FLC20M=
CHAPTER 2
Catalyst 5500 Supervisor III PCMCIA Flash Supervisor III PCMCIA Flash Memory Card, 20 MB (also available in 8 MB and 16 MB)
Catalyst 5000 Family Software Catalyst 5000 Family Rel. 4.x Software License (Enhanced Feature Set) Catalyst 5000 Rel. 5.x Software License (Enhanced Feature Set, spare) Catalyst 5500 RMON Agent License (also available for 5505) Cisco Catalyst 5000 RSFC IOS Enterprise Cisco Catalyst 5000 RSFC IOS Desktop Catalyst 5K Supervisor 2, Flash Image, Release 5.1(1)
Catalyst 5000 Family RSM CD5-C-12.0T= CD5-A-12.0T= MEM-RSM-FLC20M= MEM-RSM-128M=
Cisco IOS Catalyst 5000 RSM IOS IP Feature Pack (also available in IPSec, IPX/IBM, etc.) Cisco IOS Catalyst 5000 RSM IOS Enterprise Feature Pack Catalyst 5000 RSM Flash Credit Card: 20MB Catalyst 5000 RSM 128 MB DRAM (also available in 64MB)
Catalyst 5000 Family Accessories WS-C5599= WS-C5509-RACK= WS-C5097= WS-C5508= WS-C5008B= WS-C5518= WS-C5598= WS-C5509-FAN= WS-C5068B=
Catalyst 5500, Rack Mount Kit Catalyst 5509, Rack Mount Kit and Cable Organizer Catalyst 5000 Family, Center Rack Mount Kit Catalyst 5500, AC Power Supply Catalyst 5505, AC Power Supply Catalyst 5509, AC Power Supply (Spare) Catalyst 5509, DC Power Supply (Spare) Catalyst 5509, Fan Tray (Spare) Catalyst 5505, DC Power Supply
Catalyst 5000 Family Basic Maintenance CON-SNT-PKG13 CON-SNT-PKG16 CON-SNT-PKG15
Catalyst 5505 SMARTnet Maintenance Catalyst 5500 SMARTnet Maintenance Catalyst 5509 SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 5500/5000 series Web site: http://www.cisco.com/go/5000
Cisco Catalyst 5000 Family
2-27
LAN SWITCHING
SWC5K-BEFS-4X= FL-C5K-EFS-5X= WS-C5500-EMS-LIC SC5RSFCA-12.0.3W= SC5RSFCB-12.0.3W= SWC5K-SUP-5.1.1=
Chapter 2
LAN Switching
Cisco Catalyst 6000 Family The Catalyst 6000 Family—consisting of the Catalyst 6500 Series and the Catalyst 6000 Series—delivers a new family of high-performance, multilayer switching solutions for both enterprise and service provider networks. Designed to address the increased requirements for gigabit density, data and voice integration, LAN/WAN/MAN convergence, scalability, high availability, and intelligent multilayer switching in backbone/distribution, server-aggregation, and service provider environments, the Catalyst 6000 Family complements the Catalyst 4000 and 5000 Families and Cisco 8500 Series switches, which continue to provide premier wiring closet and network-core solutions, respectively. Together, the Catalyst Family delivers a wide range of intelligent switching solutions, enabling corporate intranets, extranets, and the internet for multimedia, mission-critical data, and voice applications.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 6500 Series
• A highly scalable platform that meets requirements for a dynamic environment including very high multilayer switching performance with high Fast Ethernet and Gigabit Ethernet port densities
Catalyst 6000 Series
• A cost-effective entry into the robust performance, high port density, and intelligent services of the Catalyst 6000 Family
Catalyst 6000 Family Solutions
• Enterprise campus distribution and core—With industry-leading port densities, performance, and high availability solutions to keep intranets humming • Enterprise Server Farm—For Gigabit wire-speed access to mission-critical server farms • High-capacity wiring closets—In very large deployments, the Catalyst 6000 family delivers advanced Layer 2, 3, and 4 switching in wiring closets • WAN/LAN/MAN integration—Single integrated platform simplifies network design, decreases rack space requirements, and decreases overall administration costs • Service Provider Networks—For all dynamic environments including e-commerce, web hosting, and co-location facilities
Key Features • Application-aware networking with multilayer switching intelligence and support for CiscoAssure policy networking • High-availability features deliver maximum uptime for mission-critical application support • Extensive Quality of Service (QOS) features for mission-critical applications • 15 Mpps (Catalyst 6000 Series) or scalable performance to 210 Mpps (Catalyst 6500 Series) • Maximum 10/100 Ethernet port density: 240 (6-slot chassis), 384 (9-slot chassis), and 576 (13-slot chassis) • Maximum Gigabit Ethernet port density: 82 (6-slot chassis), 130 (9-slot chassis), and 194 (13-slot chassis)
Competitive Products • Extreme: Black Diamond • Foundry: Big Iron
Cisco Catalyst 6000 Family
2-28
• Lucent: Cajun Switch 550 • Nortel: Passport 8600
Chapter 2
LAN Switching
Specifications Feature
Catalyst 6006
Catalyst 6009 Catalyst 6506 Catalyst 6509 Catalyst 6513
Modular Slots
6
9
Available Modules
8- and 16-port Gigabit Ethernet Same as Catalyst 6006 24-port 100FX Ethernet (multimode or singlemode) 48-port 10/100TX Ethernet (RJ-45) 48-port 10/100 Ethernet (RJ-21 or TELCO) 1-port Multimode OC-12 ATM 1-port Single-Mode OC-12 ATM 16-port 1000BASE-T Gigabit Ethernet 24-port 10BASE-FL (MT-RJ) Network Analysis Module Flex Wan Module 24 port FXS Analog Station Interface Module 8 port Voice T1 or E1 Services Module Voice Power Feature Card Intrusion Detection Module Content Switching Module
Same as Catalyst Same as Catalyst 6006 plus: 6506 Switch Fabric Module Fabric Enabled Line Cards
Same as Catalyst 6506 plus: Switch Fabric Module 2
Backplane
32 Gbps
32 Gbps
Scalable to 256 Gbps
Scalable to 256 Gbps
Scalable to 256 Gbps
Stackable
No
No
No
No
No
Multilayer Performance
15 Mpps
15 Mpps
Scalable to 100+ Mpps
Scalable to 100+ Mpps
Scalable to 210 Mpps
4000
9
13
CHAPTER 2 LAN SWITCHING
VLAN Maximum 4000
6
4000
4000
4000
FEC/GEC
Up to 8 noncontiguous ports; Same as Catalyst supports multimodule channeling 6006
Same as Catalyst 6006
Same as Catalyst 6006
Same as Catalyst 6006
Management Capabilities
CiscoWorks 2000, RMON, Same as Catalyst Enhanced Switched Port 6006 Analyzer (ESPAN), SNMP, Telnet, BOOTP, and Trivial File Transfer Protocol (TFTP)
Same as Catalyst 6006
Same as Catalyst 6006
Same as Catalyst 6006
Dimensions (HxWxD)
20.1 x 17.2 x 18.1 in.
25.2 x 17.2 x 18.1 in. 20.1 x 17.2 x 18.1 in. 25.2 x 17.2 x 18.1 in. 33.3 x 17.2 x 18.1 in.
Selected Part Numbers and Ordering Information1 Catalyst 6000 Family Chassis1 WS-C6006-1000AC= WS-C6006-1300AC= WS-C6009-1300AC= WS-C6009-2500AC= WS-C6506-1000AC= WS-C6506-1300AC= WS-C6509-1300AC= WS-C6509-2500AC= WS-C6513=
Catalyst 6006 Chassis w/ 1000W AC Power Supply Catalyst 6006 Chassis w/ 1300W AC Power Supply Catalyst 6009 Chassis w/ 1300W AC Power Supply Catalyst 6009 Chassis w/ 2500W AC Power Supply Catalyst 6506 Chassis w/ 1000W AC Power Supply Catalyst 6506 Chassis w/ 1300W AC Power Supply Catalyst 6509 Chassis w/ 1300W AC Power Supply Catalyst 6509 Chassis w/ 2500W AC Power Supply Catalyst 6513 Chassis
Catalyst 6000 Family Supervisor Engines WS-X6K-SUP1A-MSFC= WS-X6K-S1A-MSFC2= WS-X6K-SUP1A-2GE= WS-X6K-SUP1A-PFC= WS-X6K-S2-PFC2= WS-X6K-S2-MSFC2=
Catalyst 6000 Supervisor Engine1-A, 2GE, plus MSFC & PFC Catalyst 6000 Supervisor Engine1-A, 2GE, plus MSFC-2 & PFC Catalyst 6000 Supervisor Engine1A, Enhanced QoS, 2GE Catalyst 6000 Supervisor Engine1-A, 2GE, plus PFC Catalyst 6500 Supervisor Engine-2, 2GE, plus PFC-2 Catalyst 6500 Supervisor Engine-2, 2GE, plus MSFC-2 & PFC-2
Catalyst 6000 Family Modules WS-X6066-SLB-APC= WS-X6348-RJ-45= WS-X6348-RJ-45V= WS-X6248A-TEL=
Catalyst 6500 Content Switching Module Catalyst 6000 48-port 10/100, Enhanced QoS, RJ-45 Catalyst 6000 48-port 10/100, Inline Power, RJ-45 Catalyst 6000 48-port 10/100, Enhanced QoS, Telco
Cisco Catalyst 6000 Family
2-29
Chapter 2
WS-X6408A-GBIC= WS-X6416-GBIC= WS-X6516-GBIC= WS-X6182-2PA= WS-X6416-GE-MT= WS-X6101-OC12-MMF= WS-X6101-OC12-SMF= WS-X6024-10FL-MT= WS-X6324-100FX-MM= WS-X6316-GE-TX= WS-X6380-NAM= WS-F6K-VPWR= WS-F6K-MSFC2= WS-X6624-FXS= WS-X6608-T1= WS-X6608-E1= WS-X6381-IDS= WS-X6816-GBIC= WS-F6K-DFC= WS-C6500-SFM= WS-X6500-SFM2=
LAN Switching
Catalyst 6000 8-port GE, Enhanced QoS (Req. GBICs) Catalyst 6000 16-port Gig-Ethernet Mod. (Req. GBICs) Catalyst 6500 16-port GigE Mod: fabric-enabled (Req. GBICs) Catalyst 6000 Flex WAN Module (Supports 2 Port Adapters) Catalyst 6000, 16-port Gigabit Ethernet Module, MT-RJ Catalyst 6000 1-port Multimode OC-12 ATM Module, Spare Catalyst 6000 1-port Single-Mode OC-12 ATM Module, Spare Catalyst 6000 24-port 10BASE-FL MT-RJ Module Catalyst 6000 24-port 100FX, Enh QoS, MT-RJ, MMF Catalyst 6000 16-port 1000TX GE Module, RJ-45 Catalyst 6000 Network Analysis Module Catalyst 6000 Voice Power Feature Card for WS-X6348-RJ-45 Catalyst 6000 Multilayer Switch Feature Card (MSFC)II, Spare Catalyst 6000 24-port FXS Analog Station Interface Module Catalyst 6000 8-port Voice T1 and Services Module Catalyst 6000 8-port Voice E1 and Services Module Catalyst 6000 Intrusion Detection Module Catalyst 6500 16-port GE w/ Local Switching, spare (Fabric Enabled) Catalyst 6500 Distributed Forwarding Card (DFC) Catalyst 6500 Switch Fabric Module Catalyst 6500 Switch Fabric Module 2 spare
Catalyst 6000 Family Accessories WS-CDC-1300W= WS-CAC-1300W= WS-CAC-1000W WS-CAC-2500W= WS-CAC-4000W-US= WS-C6X09-RACK= WS-C6K-6SLOT-FAN= WS-C6X06-RACK= WS-X6K-SLOT-CVR=
Catalyst 6000, 1300W DC Power Supply Catalyst 6000, 1300W AC Power Supply Catalyst 6000, 1000W AC Power Supply Catalyst 6000 2500W AC Power Supply 4000Watt AC Power Supply for US spare (cable attached) Catalyst 6x00 Rack Mount Kit and Cable Organizer Catalyst 6000, Fan Tray for 6-slot Systems Catalyst 6x06, Rack Mount Kit and Cable Organizer Catalyst 6000 Blank Line Card Slot Cover
Catalyst 6000 Family Software SC6MSFCA-12102E= WS-C6X06-EMS-LIC FRC6-MSM-IPX= FR-IRC6= S6MSFC2A-12102E= SC6K-SUP2-6.1.1 SC6K-SUP2CV-6.1.1 SC6K-SUP2K9-6.1.1 SC6K-S2K9CV-6.1.1 S6SUP22A-12105E SC6K-SUP-5.4.4=
Catalyst 6000 MSFC IOS Enterprise (also available in images with VIP, Desktop, IP, IPX, etc.) Catalyst 6x06 RMON Agent License (also available for Cat6x09) Catalyst 6000 MSM IPX Feature Set License, Spare Catalyst 6000 Family InterDomain Routing Feature License Catalyst 6000 MSFC2 IOS Enterprise (also available in images with VIP, Desktop, IP/IPX, etc.) Catalyst 6000 Supervisor 2 Flash Image, Rel 6.1(1) Cat6K Supervisor 2 Flash Image w/CiscoView, Rel 6.1(1) Catalyst 6000 Supervisor 2 Flash Image w/SSH, Rel 6.1(1) Cat6K Sup 2 Flash Image w/CiscoView & w/SSH, Rel 6.1(1) Catalyst 6000 Sup2/MSFC IOS Enterprise (also available in images with Desktop, IP, IP/IPX) Catalyst 6000 Supervisor Flash Image, Release 5.4(4)
Catalyst 6000 Family Memory Options MEM-C6K-FLC16M= MEM-C6K-FLC24M= MEM-MSFC-128MB= MEM-C6K-WAN-128M= MEM-MSFC2-256MB= MEM-MSFC2-512MB= MEM-DFC-256MB= MEM-DFC-512MB=
Catalyst 6000, Supervisor PCMCIA 16MB Flash Memory Card Cat 6000 Sup PCMCIA Flash Memory Card, 24 MB Spare Catalyst 6000 MSFC Mem, 128 MB DRAM Option Catalyst 6000 WAN Module Memory, 128 MB MSFC2 256MB Memory Option MSFC2 Memory Option 512 MB Catalyst 6500 256 MB spare for DFC Catalyst 6500 512 MB option for DFC
Catalyst 6000 Family Basic Maintenance CON-SNT-PKG16 CON-SNT-PKG17
Catalyst 6006 and 6506, SMARTnet Maintenance Catalyst 6009 and 6509, SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Catalyst 6000 Family Web site: http://www.cisco.com/go/6000 Cisco Catalyst 6000 Family
2-30
Chapter 2
LAN Switching
Cisco Catalyst 8500 Multiservice Switch Routers
CHAPTER 2
The Catalyst 8500 family multiservice switch routers integrate multiservice ATM switching with wire-speed multiprotocol routing for Gigabit Ethernet and Fast Ethernet that also supports advanced Cisco IOS services for QoS and security. The Catalyst 8500 family delivers enterprise MAN/WAN and Service Provider multiservice edge solutions with scalable performance, lower cost of ownership, and offer multiple interface options in a modular chassis. The Catalyst 8500 series consists of the Catalyst 8510 (10-Gbps, 5-slot) and the Catalyst 8540 (40-Gbps, 13-slot).
LAN SWITCHING
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 8540/8510
• • • • • •
Integrated 10/100 FE, GE, and ATM Flexible ATM interfaces (T1/E1, IMA, DS3/E3, OC-3, OC-12, and OC-48) Frame Relay and Circuit Emulation Services, Multiservice MAN/WAN and Edge applications for Voice, Data, and Video solutions Wire-speed performance MPLS VPN
Key Features • Ideal for integrated multiservice ATM switching with wire-speed multiprotocol routing for gigabit Ethernet (L3eATM or Layer 3-enabled ATM) • Ideal for aggregating multiprotocol traffic from multiple wiring closets or from workgroup switches such as the Catalyst 5000 or distribution/server aggregation switches such as the Catalyst 6000 Family • Provides nonblocking routing for IP, IPX, and IP multicast and wire-speed Layer 2 switching for nonroutable protocols such as NetBIOS and DECnet LAT • Aggregate throughput of up to 24 million packets per second (pps) for non-blocking, wirespeed Layer 3 switching
Competitive Products • Foundry: Big Iron • Lucent: PSAX 1250 and 2300
• Marconi: ASX 1000, 1200, and 4000 • Alcatel: Omniswitch
Specifications Feature
Catalyst 8510
Catalyst 8540
Modular Slots
5
13
Available Modules
See Part Numbers and Ordering information for a partial parts list
Backplane
10 Gbps
40 Gbps
Throughput Performance
6 Mpps
24 Mpps
MAN / WAN
POS / ATM Uplink
POS / ATM Uplink
Dimensions (HxWxD)
10.5 x 17.2 x 18.14 in.
25.25 x 17.3 x 18.25 in.
Cisco Catalyst 8500 Multiservice Switch Routers
2-31
Chapter 2
LAN Switching
Selected Part Numbers and Ordering Information1 Catalyst 8540—Common Equipment1 C8540MSR-SKIT-AC C8545MSR-MRP4CLK= C8545MSR-MRP3CLK= C8546MSR-MSP-FCL= C8540CSR-SKIT-AC C8541CSR-RP= C8542CSR-SP= C8540-CHAS13= C8540-PWR-AC=
C8540 MSR Starter Kit w/ Stratum 4 Clock Module—AC Power (also available in DC Power) C8540 MSR Multiservice Route Processor (spare) C8540 MSR Route Processor Stratum 3 (spare) C8540 MSR Switch Processor with ATM FC (spare) Catalyst 8540 CSR Starter Kit with AC Power (also available in DC Power) Catalyst 8540 CSR Route Processor (spare) Catalyst 8540 CSR Switch Processor (spare) Catalyst 8540 - Chassis (spare) C8540 Power Supply—AC (also available in DC Power)
Catalyst 8510—Common Equipment C8510MSR-SKIT-AC C8515-MSRP= C8510CSR-SKIT-AC C8510-SRP=
Catalyst 8510 MSR Starter Kit with AC Power (also available as -DC for DC Power C8510 Multiservice Switch Route Processor (spare) Catalyst 8510 CSR Starter Kit with AC Power (also available as -DC for DC Power) C8510 Layer 3 Switch Route Processor (spare)
Catalyst 8500 Family—ATM Router Module Equipment C8540-ARM-64K= C8540-ARM2=
C8540 ATM Router Module 64K (also available for 8510) C8540 Enhanced ATM Router Module (spare)
Catalyst 8500—Layer 3 Interface Modules C85EGE-2X-16K= C85FE-16TACL-16K= C85FE-16F-16K= C8540-ACL= C85GE-1X-16K= C85FE-8T-16K= C85FE-8F-16K=
C8540 2-port Enhanced GE 16K (also available in 64K and 256K) C8540 16-port 10/100 RJ-45 w/ACL 16K (also available in 64K, in 100 MT-RJ w/ACL 64K) C8540 16-port 100-FX MT-RJ 16K (also available in 64K and in 64K with ACL) C8540 ACL Daughter Card (also available for C8510) C8510/LS1010 1-port Gigabit Ethernet 16K (also available in 64K) C8510/LS1010 8-port 10/100 RJ-45 16K (also available in 64K) C8510/LS1010 8-port 100-FX MT-RJ 16K (also available in 64K)
Catalyst 8540—ATM Interface Modules and Uplinks C85MS-2F-OC48LR= C85MS-1F4S-OC48LR= C85MS-1F4S-OC48SS= C85MS-4F-OC12SS= C85MS-16F-OC3MM= C85-POSOC12I-64K= C85-1OC3MGE-64K=
C8540 2-port OC-48c/STM-16 SMF-LR (also available in IR) C8540 1-port OC-48c/STM-16 SMF-LR+4-port OC-12 SMF (spare) C8540 1-port OC-48c/STM-16 SMF-IR+4-port OC-12 SMF (also available in MMF) C8540 4-port OC-12c/STM-4 SMF (also available in MMF) C8540 16-port OC-3c/STM-1 MMF (spare) C8540 1-port POS OC-12c/STM-4 SMF-IR Uplink & 1-port Enhanced GE 64k (available in 256K & in LR) C8540 1-port OC-3c/STM-1 MMF ATM & 1-port GE 64K (CSR Only) (also available in multiple configs & OC-12c/STM-4)
Catalyst 8500—Port Adapter Modules C85MS-SCAM-2P= WATM-CAM-2P= WAI-T1C-4RJ48= C85MS-1DS3-FRBNC= C85MS-4E1-FRRJ48= WAI-OC3-4MM= WAI-OC3-1S3M= WAI-OC12-1MM= WAI-T3-4BNC= C85MS-8T1-IMA= WAI-T1-4RJ48=
C8540 SuperCAM for Port Adapter Modules (spare) C8510 / LS1010 Carrier Modules (spare) 4 Port T1 (circuit emulation) RJ-48 PAM (also available in EI and in E1 BNC) C8500 1-port Channelized DS3 Frame-relay PAM (spare) C8500 4-port E1 Frame-Relay/FUNI PAM (spare) 4 Port OC-3c/STM-1 MMF PAM (also available in SMF-IR & SMF-LR and in STS-3c/STM-1 UTP-5) OC-3c/STM-1 Mix PAM, 1-port SMF-IR + 3-port MMF (spare) 1 Port OC-12c/STM-4c MMF PAM (also available in SMF-IR and SMF-LR) 4 Port DS-3 PAM (spare and in E3 BNC) C8500MSR/LS1010 8-port TI IMA PAM (also available in E1 120 ohm) 4 Port T1 (ATM) RJ-48 PAM (spare also available in E1 and E1 BNC E1)
Catalyst 8500 Family Software S854R3-12.0.10W= S854R2-12.0.10W=
C8540 Layer 3 feature set (also available for 8510) C8540 integrated layer 3 and ATM feature set (also available for 8510)
Catalyst 8500 Software Feature License Options FR-8510-TAGSW= FR-8540MSR-HPNNI=
C8510 Tag Switching upgrade license (also available with HPNNI and HPNNI + Tag Switching) Cat 8540MSR—Hierarchical PNNI License (also available with Tag Switching)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the 8500 series Web site: http://www.cisco.com/go/8500 Cisco Catalyst 8500 Multiservice Switch Routers
2-32
Chapter 2
LAN Switching
Additional LAN Switching Products Cisco 1548 Series Micro Switches 10/100
LAN SWITCHING
Part Numbers and Ordering Information Cisco 1548 Series Micro Switches 10/100 CISCO1548U-DS CISCO1548M
8-port 10/100 Autosensing, Full-Duplex Switch 8-port 10/100 Autosensing, Full-Duplex, Managed Switch
Cisco Catalyst 2900 Series XL — Fixed Switches An End of Sale announcement has been made on this product and will soon no longer be orderable. The recommended replacement is the new Catalyst 2950 Series—please refer page 2-14 for information on this product family. 2900 Series XL Product
Recommended Replacement
WS-C2912-XL-EN
WS-C2950-12
WS-C2924-XL-EN
WS-C2950-24
WS-C2924C-XL-EN
WS-C2950C-24
CHAPTER 2
The Cisco 1548 series Micro Switch offers low-cost autosensing 10/100 Fast Ethernet switching for remote offices or small and growing businesses, offering dedicated Fast Ethernet connections on all eight ports. This managed switch is supported by a standard web-based management interface as well as SNMP, RMON, port-based VLANs, as well as the traditional Cisco command-line interface (CLI).
Cisco Catalyst 3900 Series for Token Ring Cisco's Catalyst 3900 series are secondgeneration Token Ring switches that combine media-rate performance with a variety of high-speed uplinks, extensive network management, and support for multiple virtual LANs, that are priced ideally for backbone, workgroup, and desktop use. The Catalyst 3900 series offers an excellent interim step to customers migrating Token Ring networks to Ethernet. The Catalyst 3900 is a stackable switch that offers 20 fixed ports, a stack port, and slots that allow up to two feature cards that can provide additional Token Ring ports or high-speed uplinks. The Catalyst 3920 offers 24 fixed Token Ring ports and can be stacked with other Catalyst 3920 units or with the Catalyst 3900.
Additional LAN Switching Products
2-33
Chapter 2
LAN Switching
Cisco 1538 Series Micro Hubs 10/100 The Cisco 1538 series Micro Hub 10/100 offers a very flexible and cost-effective means of providing high-performance 10/100 Fast Ethernet connectivity to the desktop. The eight-port 10BaseT/100BaseTX autosensing hubs provide 100-Mbps peak aggregate throughput, up to ten times the performance of traditional Ethernet hubs. Autosensing 10/100 Fast Ethernet on all ports eases the deployment in mixed 10and 100BaseT environments. This stackable series allows up to 32 users to be aggregated into a single, manageable logical repeater of 10BaseT or 100BaseTX ports. The complete stack can be managed by including one Cisco 1538M (managed) hub. The managed Cisco 1538 Micro Hub is supported by a standard web-based management interface as well as SNMP, RMON, port-based VLANs, as well as the traditional Cisco command-line interface (CLI). Part Numbers and Ordering Information Cisco 1538 Micro Hubs CISCO1538 CISCO1538M
8-port Autosensing,10/100 Mbps, Manageable, Stackable Repeater 8-port Autosensing,10/100 Mbps, Managed, Stackable Repeater
Cisco FastHub 400 10/100 Series The Cisco FastHub 400 10/100 series of high-performance Fast Ethernet repeaters delivers unmatched flexibility and low-cost managed connectivity to the desktop. This series includes 12- and 24-port 10/100 Fast Ethernet repeaters. As a complement to Catalyst 2900 XL and Catalyst 3500 XL switches, the FastHub 400 10/100 series provides ultra low-cost 10/100 autosensing desktop connectivity where dedicated bandwidth is not required.
For More Information See the Cisco 1548 Micro Switch Web site: http://www.cisco.com/go/1548 See the Catalyst 2900 series XL Web site: http://www.cisco.com/go/2900xl See the Catalyst 3900 series Web site: http://www.cisco.com/go/3900 See the Cisco 1538 Micro Hub Web site: http://www.cisco.com/go/1538 See the FastHub 400 Series Web site: http://www.cisco.com/go/fh400
Cisco 1538 Series Micro Hubs 10/100
2-34
CH A P T E R
3
Wireless LAN Products Wireless LAN Products at a Glance (IEEE 802.11b) Features
Page
Cisco Aironet 350 Series Client Adapters
• • • •
3-2
Cisco Aironet 350 Series Access Points
• Support for inline power over Ethernet, simplifying and reducing the total cost of 3-4 installation and ownership • High-performance 100 Milliwatt (mW) radio design, with power management capabilities, delivering industry-leading throughput, range, and reliability • 802.1x-based Extensible Authentication Protocol (EAP) services that provide centralized, user-based authentication for hassle-free security administration and user-based privacy
Cisco Aironet 350 Series Workgroup Bridge
• Driverless installation of up to eight Ethernet-enabled devices • Optimum wireless performance and range • Standards-based centralized security
3-6
Cisco Aironet 340 Series Ethernet Bridge
• • • •
3-8
Cisco Aironet Antennas and Accessories
• A wide array of options • FCC-approved directional and omnidirectional antennas • Low-loss cable, mounting hardware, and other accessories available
Superior range and throughput Secure network communications World mode for international roaming PCMCIA card and PCI form factors
Supports wireless connections up to 25 miles apart Offers up to 11 Mbps data rate Links buildings into a single LAN Requires no license
3-9
Sample Wireless LAN Solution Overview—In-Building or Site-to-Site Enterprise, Small/Medium Business Applications •Service common areas •Support employees working in multiple offices •Cost effective, quick network deployment for temporary or leased offices
Sample Vertical Markets •Healthcare, retail, freight, etc. •Public Access •Multiple Tenant/Dwelling Units •Airports, Hotels, Convention Centers •Education: K-12 and Universities
Wireless LAN Products at a Glance (IEEE 802.11b)
3-1
CHAPTER 3 WIRELESS LAN PRODUCTS
Product
Chapter 3
Wireless LAN Products
Cisco Aironet 350 Series Client Adapters Wireless client adapters are the key to adding mobility and flexibility to an enterprise—increasing productivity by enabling users to have network and Internet access anywhere within a building without the limitation of wires. The Cisco Aironet 350 Series Client Adapters are a complement to Aironet 350 Series infrastructure devices, providing an enterprise-ready solution that combines mobility with the performance, security, and manageability that people have come to expect from Cisco. Wireless client adapters connect a variety of devices to a wireless network either in ad hoc peer-to-peer mode or in infrastructure mode with Access Points. Available in PC Card (PCMCIA) and Peripheral Component Interconnect (PCI) form factors, Cisco Aironet 350 Series Client Adapters quickly connect desktop and mobile computing devices wirelessly to all network resources. With this product, you can instantly add new employees to the network, support temporary workgroups, or enable Internet access in conference rooms or other meeting spaces. Cisco Aironet 350 Series Client Adapters deliver superior range, reliability, and performance for business users needing information access anytime, anywhere. Combined with Cisco Aironet unique security services, this product ensures that business-critical information is secure. Most importantly, the Cisco client solution is easy to use, making the benefits of wireless mobility completely transparent.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Aironet 350 Series • IT Professionals or business executives want mobility within the enterprise, as an addition or alternative to wired networks. Client Adapters • Business owners or IT directors need flexibility for frequent LAN wiring changes, either throughout the site or in selected areas. • Any company whose site is not conducive to LAN wiring because of building or budget limitations, such as older buildings, leased space or temporary sites.
Key Features • Superior range and throughput • Secure network communications • World mode for international roaming • Full-featured utilities for easy configuration and management • Compliance with the IEEE 802.11b high-rate standard • Support for all popular operating systems
Cisco Aironet 350 Series Client Adapters
3-2
Chapter 3
Wireless LAN Products
Specifications Cisco Aironet 350 Series Client Adapters
Data Rates Supported
1, 2, 5.5, and 11 Mbps
Network Standard
IEEE 802.11b
System Interface
AIR-PCM35x: PC Card (PCMCIA) Type II AIR-PCI 351x: peripheral component interconnect (PCI) Bus
Frequency Band
2.4 to 2.4897 GHz
Network Architecture Types
Infrastructure and ad hoc
Wireless Medium
Direct Sequence Spread Spectrum (DSSS)
Media Access Protocol
Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation
DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps
Operating Channels
North America: 11; ETSI: 13; Japan: 14
Nonoverlapping Channels
Three
Receive Sensitivity
1 Mbps: -94 dBm; 2 Mbps: -91 dBm; 5.5 Mbps: -89 dBm; 11 Mbps: -85 dBm
Delay Spread
1 Mbps: 500 ns; 2 Mbps: 400 ns; 5.5 Mbps: 300 ns; 11 Mbps: 140 ns
Available Transmit Power Settings
100 mW (20 dBm); 50 mW (17 dBm); 30 mW (15 dBm); 20 mW (13 dBm); 5 mW (7 dBm); 1 mW (0 dBm)
Range (typical)
Indoor: 130 ft (40 m) @ 11 Mbps; 350 ft (107 m) @ 1 Mbps Outdoor: 800 ft (244 m) @ 11 Mbps; 2000 ft (610 m) @ 1 Mbps
Compliance
Operates license free under FCC Part 15 and complies as a Class B device; complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT 1349 standards
Operating Systems Supported
Windows 95, 98, NT 4.0, 2000, ME, CE 2.0, CE 2.1, CE 3.0, Mac OS 9.x, and Linux
Antenna
AIR-PCM35x: Integrated diversity dipoles AIR-LMC35x: Two MMCX connectors (antennas optional, none supplied with unit) AIR-PCI35x: External, removable 2.2 dBi Dipole with RP-TNC Connector
Encryption Key Length
AIR-PCM352, AIR-LMC352, and AIR-PCI 352: 128-bit
Authentication Type
LEAP
Status Indicators
Link Status and Link Activity
Dimensions (W x D x H)
AIR-PCM35x: 2.13 in. (5.4 cm) x 4.37 in. (11.1 cm) x 0.1 in. (0.3 cm) AIR-LMC35x: 2.13 in. (5.4 cm) x 3.31 in. (8.4 cm) x 0.1 in. (0.3 cm) AIR-PCI35x: 6.6 in. (16.8 cm) x 3.9 in. (9.8 cm) x .5 in. (1.3 cm)
Weight
AIR-PCM35x: 1.6 oz (45g) AIR-LMC35x: 1.4 oz (40g) AIR-PCI35x: 4.4 oz (125g)
Environmental
AIR-PCM35x and AIR-LMC35x: -22° to 158° F (-30° to 70° C) AIR-PCI35x: 32° to 131° F (0° to 55° C) 10 to 90% (noncondensing)
Input Power Requirements
+5 VDC =/- 5%
Typical Power Consumption (at 100 mW Transmit: 450 mA; Receive: 270 mA; Sleep mode: 15 mA transmit power setting)
Selected Part Numbers and Ordering Information1 Cisco Aironet 350 Series Client Adapters1 AIR-PCM352 AIR-PCI352
350 Series PC Card with Diversity Antennas & 128-bit WEP 350 Series PCI Card with 2.2 dBi Dipole Antenna & 128-bit WEP
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco Aironet 350 series Web site: http://www.cisco.com/go/aironet Cisco Aironet 350 Series Client Adapters
3-3
CHAPTER 3 WIRELESS LAN PRODUCTS
Feature
Chapter 3
Wireless LAN Products
Cisco Aironet 350 Access Points The Cisco Aironet 350 Series Access Point (AP) delivers a cost-effective, reliable, secure, and easily managed wireless LAN (WLAN) solution for enterprise, small, and mediumsized businesses. It delivers ease-ofdeployment features, reducing the total cost of ownership for wireless deployments. The 350 Series also combines industry-leading radio performance, range, and reliability with integrated network services for security, mobility, and management. This the first and only solution that delivers business-class WLAN services for enterprise and medium-sized businesses. The 350 Series AP supports data rates up to 11 Mbps and is IEEE 802.11b compliant. Security is a primary concern for all WLAN installations. First-generation wireless security schemes based on service set identifier (SSID) and manual wired equivalent privacy (WEP) key management imposed significant administrative burdens precluding large-scale deployments. The Cisco solution leads the industry in providing scalable, centralized security management that delivers dynamic single-session, single-user encryption keys integrated with network logon. The security architecture is based on the IEEE 802.1x proposed standard for wireless networks. This standard is an extensible security framework that accommodates a variety of authentication and key management methods. Cisco Aironet APs interoperate with Extensible Authentication Protocol (EAP)-enabled Remote Access Dial-In User Service (RADIUS) servers such as the Cisco Access Control Server 2000 Version 2.6 and EAP-enabled client adapters such as Cisco Aironet Series clients, providing user-level authentication over an encrypted link.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Aironet 350 Series • IT Professionals or business executives want mobility within the enterprise, as an addition or alternative to wired networks Access Points • Business owners or IT directors need flexibility for frequent LAN wiring changes, either throughout the site or in selected areas • Any company whose site is not conducive to LAN wiring because of building or budget limitations, such as older buildings, leased space or temporary sites
Key Features • Support for inline power over Ethernet, simplifying and reducing the total cost of installation and ownership • High-performance 100 Milliwatt radio design, with power management capabilities, delivering industry-leading throughput, range, and reliability • 802.1x-based EAP services provide centralized, user-based authentication for easy security administration and user-based privacy • Automatic channel selection, Cisco Discovery Protocol (CDP), Dynamic Host Configuration Protocol (DHCP), and BOOTP services simplify installation and management of WLAN infrastructures • High-availability services, such as load balancing and hot-standby redundancy, for dependable, performance, and reliability Cisco Aironet 350 Access Points
3-4
Chapter 3
Wireless LAN Products
Specifications Cisco Aironet 350 Series Access Points
Data Rates Supported
1, 2, 5.5, and 11 Mbps
Network Standard
IEEE 802.11b
Uplink
Auto-sensing 10/100BaseT Ethernet
Frequency Band
2.4 to 2.4897 GHz
Network Architecture Types
Infrastructure
Wireless Medium
Direct Sequence Spread Spectrum (DSSS)
Media Access Protocol
Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation
DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps
Operating Channels
North America: 11; ETSI: 13; Japan: 14
Nonoverlapping Channels
Three
Receive Sensitivity
1 Mbps: -94 dBm; 2 Mbps: -91dBm; 5.5 Mbps: -89 dBm; 11 Mbps: -85 dBm
Delay Spread
1 Mbps: 500 ns; 2 Mbps: 400 ns; 5.5 Mbps: 300 ns; 11 Mbps: 140 ns
Available Transmit Power Settings
100 mW (20 dBm); 50 mW (17 dBm); 30 mW (15 dBm); 20 mW (13 dBm); 5 mW (7 dBm); 1 mW (O dBm)
Range (typical @ 100-mW transmit power setting with 2.2 dBi diversity dipole antenna)
Indoor: 130 ft (39.6 m) @ 11 Mbps; 350 ft (107 m) @ 1 Mbps Outdoor: 800 ft (244 m) @ 11 Mbps; 2000 ft (610 m) @ 1 Mbps
Compliance
Operates license free under FCC Part 15 and complies as a Class B device; complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT 1349 standards
SNMP Compliance
MIB I and MIB II
Antenna
AIR-AP35xE2C: Two nonremovable 2.2-dBi diversity dipoles AIR-AP35xE2R: Two RP-TNC connectors (antennas optional, none supplied with unit)
Encryption Key Length
AIR-AP352E2x: 128-bit
Security
IEEE 802.1x (proposal includes EAP and RADIUS)
Status Indicators
Three indicators on the top panel provide information concerning association status, operation, error/warning, firmware upgrade, and configuration, network/modem, and radio
Automatic Configuration Support
BOOTP and DHCP
Remote Configuration Support
Telnet, HTTP, FTP, TFTP, and SNMP
Local Configuration
Direct console port (with supplied serial cable)
Dimensions (W x D x H)
6.30 in. (16 cm) x 4.72 in. (12 cm) x 1.45 in. (3.7 cm)
Weight
12.3 oz (350g)
Environmental
Temperature: 32° to 122° F (0° to 50° C) 10 to 90% (noncondensing)
Input Power Requirements
24 10% to 60 VDC (Ethernet line power)
Selected Part Numbers and Ordering Information1 Cisco Aironet 350 Series Access Points1 AIR-AP352E2C AIR-AP352E2R
350 Series Access Point with Captured Diversity Antennas & 128-bit WEP 350 Series Access Point with Dual RP-TNC Connectors & 128-bit WEP
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco Aironet 350 series Web site: http://www.cisco.com/go/aironet
Cisco Aironet 350 Access Points
3-5
CHAPTER 3 WIRELESS LAN PRODUCTS
Feature
Chapter 3
Wireless LAN Products
Cisco Aironet 350 Series Workgroup Bridge Designed to meet the needs of remote workgroups, satellite offices, and mobile users, the Cisco Aironet 350 Series Workgroup Bridge brings the freedom and flexibility of wireless connectivity to any Ethernet-enabled device. The workgroup bridge quickly connects up to eight Ethernet-enabled laptops or other portable computers to a wireless LAN (WLAN), providing the link from these devices to any Cisco Aironet Access Point (AP) or Wireless Bridge. Any Ethernet-ready device, including printers, copiers, PCs, point-of-sale devices, or monitoring equipment, can be placed directly at the point of work using the workgroup bridge—without the expense or delay of cabling. For temporary classrooms or temporary office space, the workgroup bridge provides flexible, easy network access for up to eight devices through the use of a standard eight-port Ethernet hub. Equipment can be easily moved as workgroups change in number or location, lowering facilities costs. The Cisco Aironet 350 Series Workgroup Bridge supports Wired Equivalent Privacy (WEP) security architecture and provides up to 128-bit encryption. The Cisco Aironet security architecture is based upon an IEEE 802.1x proposal utilizing the Extensible Authentication Protocol (EAP), a proposed open standard that enables wireless manufacturers and RADIUS server vendors to independently develop interoperable hardware and software. For authentication of devices attached to the workgroup, a username and password may be stored in the workgroup bridge in either static or dynamic memory. When authenticated, the workgroup bridge receives a single-session, single-user encryption key from the Remote Access Dial-In User Service (RADIUS) server via the associated AP. With this centralized and standards-based architecture, wireless security scales to meet the requirements of any enterprise.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Aironet 350 Series • Connectivity to a network for remote workgroups located in an area that may be difficult or not practical for wiring. Workgroup Bridge • Supports up to eight Ethernet-based devices (with use of Ethernet hub)
Key Features • Driverless installation of up to eight Ethernet-enabled devices • Optimum wireless performance and range • Standards-based centralized security • Two versions for a range of application requirements • Full-featured utilities and robust management
Cisco Aironet 350 Series Workgroup Bridge
3-6
Chapter 3
Wireless LAN Products
Specifications Cisco Aironet 350 Series Workgroup Bridge
Data Rates Supported
1, 2, 5.5, and 11 Mbps
Client Interface
10BaseT Ethernet
Clients Supported
Direct: One Via hub: Eight
Network Architecture Types
Infrastructure (via Cisco Aironet AP or Bridge)
Frequency Band
2.4 to 2.4897 GHz
Wireless Medium
Direct Spread Spread Spectrum (DSSS)
Media Access Protocol
Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation
DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps
Operating Channels
North America: 11; ETSI: 13; Japan: 14
Nonoverlapping Channels
Three
Receive Sensitivity
1 Mbps: -94 dBm; 2 Mbps: -91 dBm; 5.5 Mbps: -89 dBm; 11 Mbps: -85 dBm
Delay Spread
1 Mbps: 500 ns; 2 Mbps: 400 ns; 5.5 Mbps: 300 ns; 11 Mbps: 140 ns
Available Transmit Power Settings
100 mW (20 dBm); 50 mW (17 dBm); 30 mW (15 dBm); 20 mW (13 dBm); 5 mW (7 dBm); 1 mW (0 dBm)
Range (typical)
Indoor: 130 ft (40 m) @ 11 Mbps; 350 ft (107 m) @ 1 Mbps Outdoor: 800 ft (244 m) @ 11 Mbps; 2000 ft (610 m) @ 1 Mbps
Compliance
Operates license free under FCC Part 15 and complies as a Class B device; complies with DOC regulations; complies with EN 300.328 standards
SNMP Compliance
MIB I and MIB II
Antenna
AIR-WGB35xC: One nonremovable 2.2-dBi dipole AIR-WGB35xR: Two RP-TNC connectors (antennas optional, none supplied with unit)
Encryption Key Length
AIR-WGB351x: 40-bit AIR-WGB352x: 128-bit
Remote Configuration Support
Telnet, HTTP, FTP, TFTP, and SNMP
Dimensions (W x D x H)
6.30 in. (16 cm) x 4.72 in. (12 cm) x 1.45 in. (3.7 cm)
Weight
12.3 oz (350g)
Environmental
Temperature: 32° to 122° F (0° to 50° C); 10 to 90% (Noncondensing)
Input Power Requirements
North American: 120 VAC @ 60 Hz; Universal: 90 to 264 VAC @ 47 to 63 Hz
Selected Part Numbers and Ordering Information1 Cisco Aironet 350 Series Workgroup Bridge1 AIR-WGB351C AIR-WGB352C AIR-WGB351R AIR-WGB352R
350 Series Workgroup Bridge with Captured Antenna & 40-bit WEP 350 Series Workgroup Bridge with Captured Antenna & 128-bit WEP 350 Series Workgroup Bridge with Dual RP-TNC & 40-bit WEP 350 Series Workgroup Bridge with Dual RP-TNC & 128-bit WEP
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco Aironet 350 series Web site: http://www.cisco.com/go/aironet
Cisco Aironet 350 Series Workgroup Bridge
3-7
CHAPTER 3 WIRELESS LAN PRODUCTS
Feature
Chapter 3
Wireless LAN Products
Cisco Aironet 340 Series Ethernet Bridge Designed to connect two or more networks (typically located in different buildings), Cisco Aironet wireless bridges deliver high data rates and superior throughput for data-intensive, line-of-sight applications. These bridges deliver throughput faster than E1/T1 lines for a fraction of the cost—eliminating the need for expensive and difficult-to-install leased lines or fiber-optic cable. Wireless bridges connect discrete sites into a single LAN, even when separated by obstacles such as freeways, railroads, and bodies of water, that are normally inaccessible via cabling.
Key Features • Remote bridges connect hard-to-wire sites, noncontiguous floors, satellite offices, campus settings, temporary networks, and warehouses • Provides up to 128-bit Wired Equivalent Privacy (WEP), providing a level of data security equal to traditional wired networks • High data rates for over medium/short ranges or lower rates for long-range • Requires no FCC (or applicable agency) license • Management via console or remotely (Telnet, FTP, SNMP or browser) • Supports 802.1 Spanning-Tree protocol and troubleshooting diagnostics
Specifications Feature
Cisco Aironet 340 Series Ethernet Bridge
Data Rates Supported
1, 2, 5.5, and 11 Mbps
Range (typical)
Up to 18 miles (30 km) at 11 Mbps
Frequency Band
2400-2483.5 MHz
Wireless Medium
DSSS
Network Protocols Supported
IEEE 802.3 and Ethernet blue book
Operating Channels
11 channels (U.S., Canada, and Japan) 13 channels (ETSI)
Simultaneous Channels
Three
Antenna Connection
Reverse polarity TNC (RP-TNC)4
Bridges per LAN/Users per Bridge
Unlimited bridges per LAN, maximum 2048 (wireless) users per bridge
Power Supply
Standard Power Pack: 120 VAC, 50/60 Hz to 18 VDC @1A or 12 VDC @1.5A
Dimensions
7.8 x 5.9 x 1.9 in
Selected Part Numbers and Ordering Information1 Cisco Aironet 340 Series Ethernet Bridges1 AIR-BR342US
340 Series 11Mbps DSSS Bridge, 100mW with 128-bit WEP (US)
Cisco Aironet 340 Series Ethernet Bridges Basic Maintenance CON-SNT-PKG3
SMARTnet Maintenance for AIR-BR342US
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Aironet 340 series Web site: http://www.cisco.com/go/air340 Cisco Aironet 340 Series Ethernet Bridge
3-8
Chapter 3
Wireless LAN Products
Cisco Aironet Antennas and Accessories Every wireless Local Area Network (LAN) deployment is different. When engineering an in-building solution, varying facility sizes, construction materials, and interior divisions raise a host of transmission and multipath considerations. When implementing a building-to-building solution, distance, physical obstructions between facilities, and number of transmission points involved must be considered.
With the Cisco FCC-approved directional and omnidirectional antennas, low-loss cable, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.
Key Features • Client Adapter Antennas—Cisco Aironet wireless client adapters come complete with standard antennas that provide sufficient range for most applications at 11 Mbps. To extend the transmission range for more specialized applications, a variety of optional, higher-gain antennas are provided that are compatible with selected client adapters. • Access Point Antennas—Cisco Aironet access point antennas are compatible with all Cisco RP-TNC-equipped access points. The antennas are available with different gain and range capabilities, beam widths, and form factors. Coupling the right antenna with the right access point allows for efficient coverage in any facility, as well as better reliability at higher data rates. • Bridge Antennas—Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. Available in directional configurations for point-to-point transmission and omnidirectional configuration for point-to-multipoint implementations, Cisco has a bridge antenna for every application. • Low-loss cable extends the length between any Cisco Aironet bridge and the antenna. With a loss of 6.7 dB per 100 feet (30m), low-loss cable provides installation flexibility without a significant sacrifice in range.
Cisco Aironet Antennas and Accessories
3-9
CHAPTER 3 WIRELESS LAN PRODUCTS
Cisco is committed to providing not only the best access points, client adapters, and bridges in the industry—it is also committed to providing a complete solution for any wireless LAN deployment. That is why Cisco has the widest range of antennas, cable, and accessories available from any wireless manufacturer.
Chapter 3
Wireless LAN Products
Specifications Client Adapter Antennas Feature
AIR-ANT3351
AIR-ANT3342
Description
POS diversity dipole1
Diversity dipole
Application
Indoor diversity antenna2 to extend the range Indoor diversity antenna to extend the range of Aironet LMC client adapters of Aironet LMC client adapters
Approximate Indoor Range at 1 Mbps3 350 ft (107m)
350 ft (107m)
Approximate Indoor Range at 11 Mbps3 100 ft. (51 m)
100 ft. (51 m)
Cable Length
5 ft. (1.5m)
1 ft. (0.3m)
Dimensions
Base: 7 x 2 in. (18 x 5 cm) Height: 8 in. (20 cm)
4 x 3 in. (8.6 x 6.5 cm)
Weight
9.2 oz. (261g)
5 oz. (142g)
1. A type of low-gain (2.2 dBi) antenna consisting of two (often internal) elements. 2. A ratio of decibels to an isotropic antenna that is commonly used to measure antenna gain. The greater the dBi value, the higher the gain and, as such, the more acute the angle of coverage. 3. All range estimations are based on an integrated client adapter antenna associating with an access point under ideal indoor conditions. The distances referenced here are approximations and should be used for estimation only.
Access Point Antennas Feature
AIR-ANT3213 AIR-ANT3194 AIR-ANT1728 AIR-ANT2561 AIR-ANT3549 AIR-ANT1729
Description
Pillar mount diversity omni
Application
Indoor, unobtrusive Indoor short-range Indoor Flat, circular, medium-range antenna, typically medium-range medium-range antenna hung from antenna, typically indoor antenna crossbars of drop hung from ceilings crossbars of drop ceilings
Omnidirectional ceiling mount
High gain omnidirectional ceiling mount
Omnidirectional ground plane
Patch wall mount Patch wall mount
Indoor, unobtrusive, long-range antenna (may also be used as a medium-range bridge antenna)
Indoor, unobtrusive, medium-range antenna (may also be used as a medium-range bridge antenna)
Approximate 497 ft. (151m) Indoor Range at 1 Mbps1
350 ft. (107m)
497 ft. (151m)
497 ft. (151m)
Access Point: 700 ft. (213m) Bridge: 2.0 miles (3.2 km)
Access Point: 542 ft. (165m) Bridge: 1.1 miles (1.8 km)
Approximate 142 ft. (44m) Indoor Range at 11 Mbps1
100 ft. (31m)
142 ft. (44m)
142 ft. (44m)
Access Point: 200 ft. (61m) Bridge: 3390 ft. (1032m)
Access Point: 155 ft. (47m) Bridge: 1900 ft. (580m)
Cable Length
3 ft. (0.91m)
9 ft. (2.74m)
3 ft. (0.91m)
3 ft. (0.91m)
3 ft. (0.91m)
3 ft. (0.91m)
Dimensions
10 x 1 in. (25.4 x 2.5 cm)
Length: 9 in. (22.86 cm) Diameter: 1 in. (2.5 cm)
Length: 9 in. (22.86 cm) Diameter: 1 in. (2.5 cm)
Diameter: 12 in. (30.5 cm)
5 x 5 in. (12.4 x 12.4 cm)
4 x 5 in. (9.7 x 13 cm)
Weight
1 lb. (460g)
4.6 oz. (131g)
4.6 oz. (131g)
9 oz. (255g)
5.3 oz. (150g)
4.9 oz. (139g)
1. All range estimations are based on an integrated client adapter antenna associating with an access point under ideal indoor conditions. The distances referenced here are approximations and should be used for estimation only.
Bridge Antennas Feature
AIR-ANT2506
AIR-ANT4121
Description
Omnidirectional Mast mount
High-gain omnidirectional Yagi mast mount Mast mount
Solid dish
Application
Outdoor short-range point-to-multipoint applications
Outdoor medium-range point-to-multipoint applications
Outdoor medium-range directional connections
Outdoor long-range directional connections
Approximate Indoor Range at 1 Mbps1
5000 ft. (1525m)
4.6 miles (7.4 km)
6.5 miles (10.5 km)
25 miles (40 km)
Cisco Aironet Antennas and Accessories
3-10
AIR-ANT1949
AIR-ANT3338
Chapter 3
Wireless LAN Products
Feature
AIR-ANT2506
AIR-ANT4121
AIR-ANT1949
AIR-ANT3338
Approximate Indoor Range at 11 Mbps1
1580 ft. (480m)
1.4 miles (2.3 km)
2.0 miles (3.3 km)
11.5 miles (18.5 km)
Cable Length
3 ft. (0.91m)
1 ft. (0.30m)
1.5 ft. (0.46m)
2 ft. (0.61m)
Dimensions
Length: 13 in. (33 cm) Diameter: 1 in. (2.5 cm)
Length: 40 in. (101 cm) Diameter: 1.3 in. (3 cm)
Length: 18 in. (46 cm) Diameter: 3 in. (7.6 cm)
Diameter 24 in. (61 cm)
Weight
6 oz. (17g)
1.5 lb. (0.68 kg)
1.5 lb. (0.68 kg)
11 lb. (5 kg)
1. All range estimations are based on an integrated client adapter antenna associating with an access point under ideal indoor conditions. The distances referenced here are approximations and should be used for estimation only.
Low-Loss Antenna Cable Feature
AIR-420-003346-020 AIR-420-003346-050 AIR-420-003346-075 AIR-420-003346-100
Cable Length
20 ft. (6m)
50 ft. (15m)
75 ft. (23m)
100 ft. (30m)
Transmission Loss
1.3 dBi
3.4 dBi
5.0 dBi
6.7 dBi
Cisco Aironet Accessories 420-002537-018 420-002537-060 420-003354
420-003745
430-002662
Description
18 in. (46 cm) bulkhead 60 in. (152 cm) extender bulkhead extender
Optional antenna adapter cable
Yagi articulating mount
Application
Flexible antenna cable Flexible antenna cable Helps prevent damage Used to add Adds swiveling that extends access that extends access due to higher-gain antennas capability to point cabling typically point cabling typically lightning-induced to universal and mast-mounted yagi within an enclosure within an enclosure surges or static multistation clients for antennas electricity longer-range applications
Lightening arrestor
Selected Part Numbers and Ordering Information1 Cisco 340 and 350 Series Accessories1 AIR-ACC1622 AIR-ACC1828 AIR-ACC1833 AIR-ACC2228 AIR-ACC2537-018 AIR-ACC2538 AIR-ACC2662 AIR-ACC3354 AIR-ACC3986-001 AIR-ACC5559-072 AIR-420-003346-100 AIR-420-3745-0400 AIR-420-1625-0500 AIR-SK342BB AIR-SK342IB
TNC straight plug, crimp style, for 9913 cable (also available in straight jack crimp style) TNC jack R/P mate for RG-58 340 Series Bridge Mounting Kit Dipole Antenna Mount 18 inch (.5m) Bulkhead Extender (also available in 60 inch) Bulkhead connector Yagi Antenna Articulating Mount Lightning Arrestor w/ grounding ring Slide mount kit for Bridges 340 Series Serial Cable for Console Port Configuration 100 ft. (30m) low loss antenna cable (also available in 20, 50, and 75 ft.) Assembly cable RP-SMA plug-4 inches RP-TNC assembly (5 inches) Building-to-Building Starter Kit In-Building Starter Kit
Cisco 340 and 350 Series Antennas AIR-ANT1728 AIR-ANT1729 AIR-ANT1949 AIR-ANT2506 AIR-ANT2561 AIR-ANT3120-001 AIR-ANT3194 AIR-ANT3195 AIR-ANT3213 AIR-ANT3309 AIR-ANT3338 AIR-ANT3342 AIR-ANT3351 AIR-ANT3549
5.2 dBi Omni Ceiling Mount Antenna 6 dBi Patch Wall Mount Antenna 13.5 dBi Yagi Mast Mount Antenna 5.2 dBi Omnidirectional Mast Mount Antenna 5.2 dBi Omnidirectional Ground Plane Antenna 2.2 dBi Snap-on PC Card Diversity Antenna 2.2 dBi Omni Ceiling Mount Antenna 3 dBi Patch Wall Mount Antenna 5.2 dBi Pillar-Mount Diversity Omni Antenna 2.2 dBi POS Diversity Base Antenna 21 dBi Solid Dish Antenna 2.2 dBi Diversity “Rabbit Ear” External Antenna 2.2 dBi POS Diversity Dipole Antenna 8.5 dBi Hemispherical Patch Antenna
Cisco Aironet Antennas and Accessories
3-11
CHAPTER 3 WIRELESS LAN PRODUCTS
Feature
Chapter 3
AIR-ANT4121 AIR-ANT4941 AIR-ANT-AKDISH
Wireless LAN Products
12 dBi Omnidirectional Mast Mount Antenna 2.2 dBi Dipole Antenna (Standard Rubber Duck) Antenna Kit w/ 21 dBi Dish Ant., 50 ft cable, Light. Arrest (also in 12 dBi Omni, 6 dBi Patch, and 13.4 dBi Yagi)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Wireless Antennas & Accessories Web site http://www.cisco.com/go/antenna
Cisco Aironet Antennas and Accessories
3-12
4
CH A P T E R
IP Telephony, Video, & Web Collaboration Campus IP Telephony, Video, & Web Collaboration at a Glance Product
Features
Cisco 7900 Series IP Phones
From full- to basic-featured telephones that can be plugged directly into a standard 10 / 100 4-4 BASE-T Ethernet connection • Easy-to-program and easy-to-use phones • Integrated 2-port Ethernet Switch • IP Feature rich capabilities including XML applications
Page
Cisco CallManager 3.0 and 3.1
• The software-based call processing and call control component of Cisco’s IP Telephony solution • Resides on Media Convergence Servers (MCS) or ICS7750
4-6
IP Telephony Applications • Cisco Survivable Remote Site (SRS) Telephony Software—IOS software that runs on local 4-8
Cisco MCS 7800 Series Media Convergence Servers
High availability server platform for Cisco IP telephony systems • Turnkey solution, includes CallManager or other software • For large- and medium-sized enterprise IP telephony deployments
Catalyst 4224 Access Gateway Switch
Full-featured integrated device offering IP routing, Ethernet switching with inline power, and 4-13 voice gateway capabilities into a two-rack unit (2U) chassis • Ideal for deploying converged IP communications • Branch office solution for up to 24 users
Cisco ICS 7750 Integrated Communications System
Modular system for branch offices and midmarket businesses 4-14 • Incorporates multiple elements needed for a converged campus IP telephony solution in one platform • Includes Cisco CallManager software, IOS-based multiservice router/voice gateway, application servers running core voice application, Web-based management, and seamless connectivity to any Cisco Catalyst switches
Router-based fixed-configuration Integrated Access Device (IAD) Cisco IAD 2400 Series Integrated Access Device1 • IP-based key switch functionality, ideal for small offices (5-20 phones) who do not need
4-11
4-14
Cisco CallManager capabilities • Supports standard phones and IP phones on a single platform • 8 FXS/16 FXS/16FXS+8FXO analog voice ports and 1 T1 digital voice port models • T1, ADSL, and G.shdsl WAN interfaces
Cisco Voice Gateways2
These dedicated gateways provide connectivity between IP networks and legacy telephony 4-17 systems/PSTN • Cisco VoIP gateway models support various types of analog and digital interfaces, including T1 and E1 • Fully manageable by Cisco CallManager, a CLI interface via Telnet, or via SNMP
Campus IP Telephony, Video, & Web Collaboration at a Glance
4-1
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
branch office router which automatically detects WAN failure (interrupting link to CallManager) and provides backup redundancy for IP phones in that office • Cisco Unity—Voicemail and unified messaging system delivers all messages into single inbox for access via phone, email or Internet • Cisco IP IVR/IPAA—Interactive voice response software-based solution which can be located anywhere in IP network, and sold with CallManager to run on separate Media Convergence Server • Cisco IP Integrated Contact Distribution—Automated voice call distribution allows management of phone calls into response centers • Cisco Personal Assistant—Software application allows users to browse voicemail, dial by name, and conference from any phone using voice commands instead of telephone keypad via speech recognition • Cisco IP SoftPhone—Windows-based application for PC, allows users to make and receive calls from PC without a dedicated phone
Chapter 4
IP Telephony, Video, & Web Collaboration
Product
Features
Page
Cisco IP/VC 3500 Series Videoconferencing Products
• Videoconferencing over IP solution • Cost-effective, easy-to-manage • Translates between H.323 and H.320 systems
4-18
Cisco IP/TV 3400 Series Video Servers
• High-quality video communications over enterprise networks • Support live and scheduled video, video on demand • Enable training, corporate communications, business TV, and distance learning
4-19
Cisco Collaboration Server • Web-based collaboration, share any Windows desktop application
4-19
• Ideal for both sales- and service-oriented customer service organizations
1. IP Keyswitch capabilities also available with 2600 and 3600 series routers; see IP Keyswitch Web site: http://www.cisco.com/go/keyswitch 2. Cisco’s full line of multiservice routers also provide analog and digital voice gateway functionality through use of network modules and voice interface cards. Please see the 1700, 2600, 3600, 7200, 5x00 series in Chapter 1—Routers, as well as Chapter 7—Access Products.
Campus IP Telephony, Video, & Web Collaboration at a Glance
4-2
Chapter 4
IP Telephony, Video, & Web Collaboration
Sample IP Telephony Solution Overview— Converged Data and Voice Networks for Enterprises
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
Sample IP Telephony Solution Overview— Converged Data and Voice Networks
4-3
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco 7900 Series IP Phones Cisco IP Phones deliver essential business communications at a touch. Fully programmable, with three models to choose from, 7960, 7940, 7910 and 7910+SW, Cisco IP telephones provide the most frequently used business features in an easy-to-program and easy-to-use platform. Each model is a full-featured telephone that can be plugged directly into a standard 10/100BASE-T Ethernet connection. Each provides toll-quality audio, three models are equipped with a two port Cisco 10/100 switch with connection for a companion PC. Because they are IP-based telephones, they can be installed anywhere on a corporate IP network. The phones are Dynamic Host Configuration Protocol (DHCP) supported and do not need to be co-located with the Cisco CallManager. Cisco IP telephones support both G.711 and G.723a audio compression for low-bandwidth requirements. The download firmware capability allows the phone to be programmed from the system with new capabilities.
Key Features • The Cisco 7960 is the full-featured Cisco IP Phone for executives and managers. It provides 6 programmable line and speed dial buttons, the 7940 with 2 buttons for business professionals and office workers with lower traffic applications. Both include full-duplex speakerphone with lighted mute button. A large 3 x 4 inch pixel LCD displays graphical and text information such as date and time, calling party name, calling party number, and digits dialed. These phones are also XML-enabled, making them ideal for displaying Internet content. • The Cisco 7910 and 7910+SW are the Cisco IP Phones designed for low-end, low-traffic requirements such as hallways, break rooms, and other areas not requiring high-end features. These two models are single line phones, and have a 2 x 24 character LCD display for call status and identification. • DHCP support for Cisco IP Phones makes phone setup virtually automatic. With DHCP new installations can be accomplished in seconds, saving time and money over today’s complex PBX system management. • Moving Cisco IP Phones requires no manual database adjustments or wiring changes, unlike legacy telephone systems, thereby saving time and money. The phones can be moved from one Ethernet port to another, anywhere on the enterprise IP network, and the Cisco IP Phones will automatically boot and reregister with Cisco CallManager. • Cisco IP Phones are Microsoft NetMeeting enabled. Using NetMeeting, features such as application sharing and video conferencing are available simply by pressing a button on your Cisco IP telephone. • All models use Cisco Discovery Protocol (CDP) to enable power down the LAN thus eliminating the need for a local power transformer cube.
Cisco 7900 Series IP Phones
4-4
Chapter 4
IP Telephony, Video, & Web Collaboration
Specifications Feature1
Cisco IP Telephones
Dimensions (HxWxD) and Weight 8 x 10.5 x 6 in; 3.2 pounds Material, Housing
Polycarbonate acrylonitrile butadiene (ABS) plastic, Dark Gray
Interface
1 10/100BASE-T RJ-45 interface for network connection and 1 “switch port” for connection to PC
Input Voltage
100 to 230 VAC country-specific, or via Ethernet in-line power
1. Not all headsets are compatible with IP Phones. Compatible headsets include Plantronics "Encore Model H101N" p/n 43467-01.
Selected Part Numbers and Ordering Information1 Cisco 7900 Series IP Power and Phones1 CP-7960 CP-7940 CP-7910+SW CP-7910 CP-7935 CP-PWR-CUBE= CP-PWR-CORD-NA= WS-PWR-PANEL
Cisco IP Phone, 7960, Manager Set, 6 Button (w/User License) Cisco IP Phone, 7940, Business Set, 2 Button (w/User License) Cisco IP Phone, 7910, Basic Set, Single Line, (w/ User License) with 10/100 BaseT 2-port Switch Cisco IP Phone, 7910, Basic Set, Single Line, Single 10 BaseT Port (w/ User License) Cisco IP Conference Station, Full Duplex, Conference room applications IP Phone power transformer for 7900 series phones 7900 Series Transformer Power Cord, North America Catalyst 48 port Inline Power Patch Panel
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco IP Telephones Web site: http://www.cisco.com/go/iptel CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
Cisco 7900 Series IP Phones
4-5
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco CallManager 3.0 and 3.1 Cisco CallManager call-processing software extends enterprise telephony features and capabilities to enterprise LANs and packet telephony network devices such as IP phones, media processing devices, voice-over-IP (VoIP) gateways, and multimedia applications. Additional data, voice, and video services such as unified messaging, multimedia conferencing, collaborative contact centers, and interactive multimedia response systems interact with the IP telephony solution through CallManager's open telephony application programming interfaces (API). Cisco CallManager is installed on Cisco Media Convergence Servers (MCS) or Cisco ICS 7750 Integrated Communications Systems. It ships with a suite of integrated voice applications and utilities, including the Cisco WebAttendant—a software-only manual attendant console; a conferencing application; and administrative reporting tools.
Key Features • Cisco CallManager includes a suite of integrated voice applications that perform voice conferencing and manual attendant console functions, eliminating the need for special-purpose voice processing hardware. • Cisco CallManager is preinstalled on the Cisco Media Convergence Server (MCS) high-availability server platforms as well as Cisco ICS 7750 systems. • Supplementary and enhanced services such as hold, transfer, forward, conference, multiple line appearances, automatic route selection, speed dial, last-number redial, & other features are extended to IP phones & gateways. • Capabilities enhancements are achieved though software upgradability, avoiding expensive hardware costs traditional to legacy PBX systems • All IP telephony elements may be distributed across an IP network for high system availability and scalability. • Call admission control ensures that voice quality of service (QoS) is maintained across constricted WAN links, and automatically diverting calls to PSTN when WAN bandwidth temporarily unavailable. • Web-browsable interface to the configuration database is available for remote device and system configuration and HTML-based online help. • Clustering allows scaling up to 10,000 users per cluster; support tens of thousands of users by interlinking clusters • Cisco WebAttendant—This Web-enabled application supports the traditional role of a manual attendant console and allows the attendant to quickly accept and dispatch calls to enterprise users. Integrated directory service provides traditional busy lamp field and direct station select functions for any line in the system. It monitors the state of every line in the system without requiring hardware-based line monitoring devices. • Software-only voice and multimedia applications such as the Cisco Interactive Voice Response system, Cisco IP Contact Center, Cisco Automated Attendant, and Cisco SoftPhone are applications that interact with the Cisco CallManager through telephony APIs. The benefit to the customer is distributed, next generation applications which can interact with e-business applications. • Triple server redundancy improves overall system availability. Cisco CallManager 3.0 and 3.1
4-6
Chapter 4
IP Telephony, Video, & Web Collaboration
Specifications Feature
Cisco CallManager 3.0
Cisco CallManager 3.11
Platforms
Media Convergence Server
Media Convergence Server (MCS) Integrated Communications Server (ICS-7750)
Preinstalled Software Cisco CallManager Version 3.0 (call processing and
Cisco CallManager version 3.1 (call processing and call-control application) call-control application) Cisco CallManager Version 3.0 configuration database Cisco CallManager version 3.1 configuration database (contains system and device configurationinformation, (contains system and device configuration information, including dial plan) including dial plan) Cisco CallManager Administration software Cisco CallManager Administration software (Web-browsable application provides graphical user Cisco Conference Bridge interface to Cisco CallManager database) Cisco WebAttendant Cisco Conference Bridge (voice conferencing Bulk Administration Tool (BAT) application) Administrative Reporting Tool (ART)
Sample Subset of System Capabilities
Alternate Automatic Routing Attenuation/gain adjustment per device (phone and gateway) Automated bandwidth selection Automated route selection Call admission control Distributed call processing Max 2,500 devices per Cisco CallManager server Max BHCC 50,000 per Cisco CallManager server Five Cisco CallManager servers per cluster Max BHCC 125,000 per Cisco CallManager cluster Max 10,000 devices per cluster FAX over IP—G.711 pass-through H.323 interface to selected third party devices Multiple ISDN protocol support Off-premise station (OPX) Out-of-band DTMF signaling over IP PSTN failover High redundancy SMDI for message waiting indication
Summary of User Features
Call forward—all (off-net/on-net); busy; no answer CallManager 3.1 introduced over 50 key enhancements to user and administrative functions, including: Call park/pickup • Wideband audio codec support in Cisco IP Phone Call status per line (state, duration, number) 7910, 7940, and 7960 handsets (16 kHz sampling, 16-bit Call waiting/retrieve sample resolution) Calling Line Identification—CLID • Intelligent dialing support RDNIS missed, received, Calling party name identification—CNID placed calls from Cisco 7940 and 7960 IP Phones Click to dial from Web browser • On-hook dialing Direct inward dial—DID • Audio streaming Direct outward dial—DOD • Multiple server instances for server load balancing and redundancy Directory dial from phone (3.0(2)) • Survivable Remote Site Telephony support Distinctive ring (internal vs. external) • WebAttendant enhancement-pop-to-top on newcall Distinctive ring per phone • Overlap sending support through PRI ISDN Hands-free, full duplex speakerphone HTML help access from phone See URL listed under ‘For More Information’ for a Last number redial—(off-net/on-net) complete list of features. Message waiting indication Multi-party conference—Ad-hoc with add-on, Meet-me Multiple line appearances per phone Mute—speakerphone and handset Off-hook dialing Operator attendant—Web-browser interface, Loop key notification, Log-on/log-off, Busy/Available, Left/right hand access, Headphone access, Busy Lamp Field, Direct Station Select, Drag and drop transfer, Call status (state, duration, number) Privacy QoS statistics at phone Web services access from phone
Same as CallManager 3.0
4-7
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
Cisco CallManager 3.0 and 3.1
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco CallManager 3.11
Feature
Cisco CallManager 3.0
Summary of Administrative Features
Rich array of administrative features—see URL listed Same as CallManager 3.0 plus: under ‘For More Information’ for complete list. • Configuration database API • MGCP signaling and control to selected Cisco VoIP gateways • Redirected DNIS (RDNIS), *outbound (to H.323 devices)
1. Additional RAM may be required in Media Convergence Servers to support existing and enhanced services in Cisco CallManager 3.1.
Selected Part Numbers and Ordering Information1 Cisco CallManager 3.01 SW-CCM-3_0UPGD
Cisco CallManager 3.0 upgrade CD-ROM includes supporting software (operating system upgrade and database server upgrade) and documentation
1. This is only a subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco CallManager Web sites: http://www.cisco.com/go/callmgr30 and http://www.cisco.com/go/callmgr31
Additonal Cisco IP Telephony Applications Cisco SRS Telephony Survivable Remote Site Telephony (SRS Telephony) provides key back-up telephony functions at remote branch office routers if connectivity to the centrally-located Cisco CallManager fails (i.e. WAN link is interrupted). In this case the SRS Telephony- enabled router will take over and provide basic telephony service (including off-net calls to 911). Introduced in Cisco IOS Release 12.1.5YD, the application is ideal for enterprise organizations looking to cost-effectively deploy IP telephony in their branch office location.
Cisco Unity Voice Mail Cisco Unity complements the full range of Cisco’s IP-based voice solutions by providing advanced capabilities that unify data and voice. Cisco Unity delivers all messages into a single inbox, giving users the freedom to access and manage every voice, fax, and e-mail with the click of a mouse, or the push of a button. With Cisco Unity, users can check voice messages via telephone or from the Internet, listen to their e-mail over the telephone, and forward faxes to any local fax machine and more. Built on a scalable platform, it also uses streaming media and an intuitive HTML browser-style system administration interface that increases efficiency, thereby lowering IT costs.
Additonal Cisco IP Telephony Applications
4-8
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco IP IVR Cisco IP IVR, an interactive voice response (IVR) solution, provides a feature rich foundation for the creation of an IP-based IVR that is open and expandable. Written in Java to provide customer flexibility, IVR includes the following features: • Multimedia (voice/data/Web) IP-empowered application-generation environment • Cisco IP IVR can be located in anywhere the IP network • Offers web-based activation and administration • Flows (the IP IVR applications) are stored in an industry standard LDAP directory • Cisco IP IVR is bundled with Cisco CallManager or can function on a separate, dedicated media convergence servers (MCSs) • Packages available to scale up to 48 ports
Cisco IP Integrated Contact Distribution
Cisco Personal Assistant Cisco Personal Assistant streamlines voice communications with personal call rules and speech recognition. As an integral part of the Personal Productivity Suite, it interoperates with the Cisco CallManager. With Cisco Personal Assistant, users browse voice mail, dial by name, and conference from any telephone using voice instead of the telephone keypad. Users can forward and screen calls in advance or in real time using a simple, web-based interface. The platform for the Cisco Personal Assistant operates on the Cisco Media Convergence Servers 7825-800 or 7835-1000.
Cisco IP SoftPhone The Cisco IP SoftPhone is an advanced, state-of-the-art communications application for your PC desktop. It can be used in any application where a telephone can be used and is fully integrated with the Cisco line of IP telephones. Cisco IP IVR
4-9
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
Cisco IP Integrated Contact Distribution (IP ICD) is an inexpensive, easy-to-install, and easy-to-use automatic call distributor (ACD) for enterprise organizations. Cisco IP ICD is one of a series of solutions built on the Cisco Customer Response (CR) platform, Cisco System’s open platform for customer response applications. Cisco IP ICD is seamlessly integrated with all other customer response applications, including Cisco IP Interactive Voice Response (IP IVR) and Cisco IP Automated Attendant (IP AA). Key benefits of IP ICD include: it provides a low-cost, entry-level ACD that is easy to install, administer, and use; it supports multimedia (voice, data, and Web) access when used with Cisco IP IVR; it provides complete customization tools for call flow scripts; and it supports seamless integration with Cisco customer response applications.
Chapter 4
IP Telephony, Video, & Web Collaboration
The Cisco IP SoftPhone takes advantage of the usability of a PC and controls your hardware IP telephone; in addition, it functions as a standalone, software IP phone.
Selected Part Numbers and Ordering Information1 Cisco Survivable Remote Site Telephony (SRS Telephony) Licenses FL-SRST-SMALL FL-SRST-MEDIUM
SRS Telephony Site License for the Cisco IAD 2400/2600/3620/Catalyst 4224 (up to 24 phones) SRS Telephony Site License for the Cisco 3640 (up to 48 phones) or order multiple licenses for the Cisco 3660 (up to 144 phones, each supports up to 48 phones)
Cisco Unity Voice Mail12 IPL1V4246 IPL1U4T2246 IPMCSV24246
Unity IP with Dell G1, 50 users, 4 ports VM Unity IP with Dell G1, 50 Users, 4 Ports UM, 2 TTS Unity 2.46 IP with MCS-7835; 500 Users, 24 Ports VM
Cisco IP IVR (for use with CallManager v3.0(9)) SW-CCM-AAIRV21= SW-IVR4-V21 SW-IVR24-V21
IPIVR v2.1 Co-resident package, 8 ports of AA and 2 ports IVR IPIVR v2.1 Base package, 4 port IVR license key (works with MCS-7825-800) IPIVR v2.1 High-end package, 24 port IVR license key (works with MCS-7835-1000)
Cisco IP Integrated Contact Distribution (ICD) SW-ICD-SRVR22-MCS SW-ICD-SRVR22-CPQ= SW-ICD-SRVR22-IBM= SW-ICD-AGENT22=
Basic IP ICD Server, ver. 2.2, for MCS platforms with 5 basic agent licenses Basic IP ICD Server, ver. 2.2, for Compaq platforms with 5 basic agent licenses Basic IP ICD Server, ver. 2.2, for IBM platforms with 5 basic agent licenses One basic IP ICD agent license, ver. 2.2
Cisco Personal Assistant SW-PASR1.1-SVR2 SW-PASR1.1-USR SW-PASR1.1-KX
Cisco Personal Assistant Server with Speech Recognition Personal Productivity Users License Cisco Personal Assistant, Expansion Speech Recognition Session (various session combinations available)
Cisco IP SoftPhone SW-IPSOFTPHONE25=
Cisco IP Softphone CD; 25 licenses (licenses also available for 1, 50, and 100 users)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability). 2. Over 25 variants to choose from, ranging from small business to enterprise class
For More Information See the Unity Web site: http://www.cisco.com/go/unity See the IP IVR Web site: http://www.cisco.com/go/ivr See the Personal Assistant Web site: http://www.cisco.com/go/personalassist See the SRS Telephony Web site: http://www.cisco.com/go/srs See the IP SoftPhone Web site: http://www.cisco.com/go/softphone See the IP Integrated Contact Distribution Web site: http://www.cisco.com/go/icd
Cisco IP SoftPhone
4-10
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco MCS 7800 Series Media Convergence Servers Cisco Media Convergence Server 7825-800 The Cisco Media Convergence Server 7825-800 (MCS-7825-800) is a powerful platform for serving multiple Cisco IP telephony applications. At only one rack unit (1U) high, this space-efficient member of the MCS 7800 series can be configured to ship with Cisco CallManager 3.0 or Cisco IP Interactive Voice Response (IP IVR). Key Features • High-performance—Designed for today's IP telephony applications, with an 800 MHz Intel Pentium III processor and 512 MB of error-correcting code (ECC) SDRAM memory. • Availability—Cisco CallManager 3.0 significantly enhances the availability of the enterprise IP telephony solution eight servers to be clustered and managed as a single entity. Clustering aggregates the power of multiple, distributed Cisco CallManagers, enhancing scalability and accessibility of the servers to phones, gateways, and applications. Triple server redundancy improves overall system availability. • Scalability—Up to 42 MCS-7825-800 servers can be deployed in a 19-inch rack.
Cisco Media Convergence Server 7835-1000 The Cisco Media Convergence Server 7835-1000 (MCS-7835-1000) is a high-availability server platform and is an integral part of a complete, scalable architecture for a new generation of high-quality IP voice solutions for converged enterprise networks. It represents a turnkey solution that is easy to deploy and highly cost effective. At only 3RU high, the MCS-7835-1000 packs tremendous power in a low-profile chassis that minimizes rack space. It runs a variety of Cisco applications, such as Cisco CallManager and Cisco IP Interactive Voice Response (IP IVR). Key Features • High-performance—1-GHz Intel Pentium III processor, and ships with 1 GB of 133-MHz registered SDRAM. In addition, hardware RAID support for dual 18.2-GB Ultra3 SCSI hot-plug hard drives (10,000 rpm) improves overall system performance. • High Availability—Includes redundant hot-plug power supply and two redundant 18.2-GB SCSI hot-plug hard drives running RAID-1 disk mirroring to ensure maximum availability. Cisco MCS 7800 Series Media Convergence Servers
4-11
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
• System Backup and Restore—Every MCS-7825-800 includes backup and restore functionality that is configured to run the automatic installation software. Backups can be done on another server on an IP network or the optional internal DAT drive.
Chapter 4
IP Telephony, Video, & Web Collaboration
• Scalability—As a Cisco CallManager 3.0 server, each MCS-7835-1000 can handle up to 2500 IP phones (total number of IP phones is dependent on N+1 redundancy configuration). Remote sites can be interconnected with a standards-based H.323 interface, using an H.323 gatekeeper. • Flexibility—It can run either Cisco CallManager software or Cisco IP IVR software and is also designed to run future Cisco application packages. The MCS-7835-1000 has an optional internal 12/24-GB DAT tape drive and optional rack mount hardware. • System Backup and Restore—Every MCS-7835-1000 includes backup and restore functionality that is configured to run the automatic installation software. Backups can be done on another server on an IP network or the optional internal DAT drive.
Specifications Description
Cisco Media Convergence Server 7825-800
Cisco Media Convergence Server 7835-1000
Server
Intel Pentium® III 800-MHz Processor Intel Pentium III 1-GHz processor 1U Rack form factor (1.75 in/4.45 cm) 256-KB level 2 ECC cache 256 KB level 2 ECC cache 1 GB 133-MHz registered ECC SDRAM memory 512 MB 133-MHz Registered ECC SDRAM memory 10/100 TX PCI Embedded Fast Ethernet NIC ServerWorks LE 3.0 Chipset with 133-MHz Front Side Bus Integrated Dual Channel Wide-Ultra SCSI-3 Controller Dual Fast Ethernet NICs Embedded 10/100 WOL (currently Dual 18.2GB Ultra3 SCSI hot plug drives only one NIC is supported) 1.44 MB Floppy Disk Integrated Ultra ATA/100 Controller Module Pre-installed high-speed IDE CD ROM Drive Single 20-GB Ultra ATA/100 7,200 rpm non-hot plug 1 drive Hot-plug redundant 275-watt power supply Removable CD-ROM/diskette drive assembly Integrated ATI Rage IIC Video Controller with 4-MB Video 180-Watt PFC Power Supply Memory Integrated ATI RAGE XL Video Controller with 4-MB 3U (5.25-inch) rack height, ships with sliding rails SDRAM Video Memory Front and Rear Unit Identification switches (UID)
Dimensions
1.67 x 16.75 x 21.5 in / 4.24 x 42.55 x 54.6 cm
Weight
24.58 lbs / 11.15 kg (fully configured with two hard drives) 55 lb / 25 kg (without hard drives)
5.1 x 19 x 24.6 in / 13.1 x 48.3 x 62.5 cm
Selected Part Numbers and Ordering Information1 Cisco Media Convergence Server 7825-8001 MCS-7825-800
Cisco Media Convergence Server 7825-800
Cisco Media Convergence Server 7835-1000 MCS-7835-1000
Cisco Media Convergence Server 7835-1000
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Media Convergence Server Web site: http://www.cisco.com/go/mcs
Cisco MCS 7800 Series Media Convergence Servers
4-12
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco Catalyst 4224 Access Gateway Switch The Cisco Catalyst 4224 Access Gateway Switch delivers IP routing, Ethernet switching and voice gateway capabilities into a two-rack unit (2U) chassis, deploying all of Cisco's enhanced IP communication features and applications to branch locations as a simple and cost-effective solution. The Catalyst 4224 has twenty-four 10/100 switched Ethernet ports with integrated inline power and advanced quality of service (QoS) features that make it an ideal choice for extending Cisco converged networks to small branch offices of up to 24 users. It uses Cisco Survivable Remote Site (SRS) Telephony to provide backup services in the event of a WAN failure, making it a powerful platform.
When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 4224 Access Gateway Switch
• Single unit, ideal for small branch office converged IP Telephony deployment with under 24 users • Centralized deployment using Cisco CallManager for call handling and Cisco SRS Telephony software provides backup redundancy at the branch office
Key Features • 24 10BaseT/100BaseTX ports, each deliver up to 200 Mbps of bandwidth (full duplex) & provides 48-volt DC inline over Cat 5 UTP cable to IP phones
• Shares modular VIC/WIC interfaces with 1700, 2600, & 3600 platforms • PBX and PSTN voice gateway with 8 integrated FXS ports
Specifications Feature
Catalyst 4224
Processor Type/Performance
MPC8260; 35,000 pps and 64 byte Layer 3, 3.3-Mpps Layer 2 switch
Memory
32 MB (Flash); 64 MB (System DRAM)
VIC/WIC Slots
3 (first and second slot support VIC or WIC cards, third slot is VIC only)
Console and Management Port
1 console port (up to 115.2 kbps); one 10/100BaseT management port
Onboard LAN Ports
24 10BaseT/100BaseTX
Onboard FXS Ports
8 (RJ-21 connector)
Power Supply
240 W -12V/-48V AC-DC supply; optional RPS 300 redundant power supply
MAC Addresses
1024
Hardware Encryption
Included onboard
Selected Part Numbers and Ordering Information Cisco Catalyst 4224 Switch WS-C4224V-8FXS
Catalyst 4224 Voice Gateway Switch
For More Information See the Catalyst 4224 Web site: http://www.cisco.com/go/cat4224 Cisco Catalyst 4224 Access Gateway Switch
4-13
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
• IOS-based, provides all routing required for voice, video, and data plus support for VPN and firewall feature sets
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco ICS 7750 Integrated Communications System The Cisco Integrated Communications System (ICS) 7750 is an advanced IP telephony platform that is easily expandable and is Web-manageable. It merges formerly isolated voice and data communication—creating an efficient, converged solution. The ICS 7750 offers branch offices and midmarket businesses quick and cost-effective deployment of powerful applications including unified messaging, integrated Web call centers, and data/voice collaboration. The ICS 7750 includes Cisco CallManager software, and combines an IOS-based multiservice router/voice gateway, application servers running core voice applications, Web-based management, and seamless connectivity to Cisco Catalyst switches.
When to Sell Sell This Product
When a Customer Needs These Features
ICS 7750 Integrated Communications System
• A branch office/midmarket business solution for converged LAN IP telephony • A single platform that incorporates CallManager, multiservice router/voice gateway, application server for additonal voice applications, and Web-based management
Key Features • Integrated Functionality (includes CallManager for call-processing, multiservice router/voice gateway, Web-based management, and core voice applications) • Modular chassis architecture features 6 universal slots with hot swapability • Modular industry-proven Cisco IOS-based Multiservice Route Processor (MRP) delivers data routing and voice trunking; ensures end-to-end QoS • Industry-leading selection of WAN Interfaces; wide selection of voice interfaces • Optional redundant power supply and uninterruptible power supply • Integrated Web/GUI-based system management tool for simple monitoring and troubleshooting; Console and Telnet access to CLI system management • Automated inventory, discovery, and configuration of desktop devices and applications • Automated fault management, auto-notification of problems via e-mail or pager • Compatible with SNMP-based management tools including CiscoWorks 2000 • N+1 clustering enables a backup Cisco CallManager to maintain call-processing
Cisco ICS 7750 Integrated Communications System
4-14
Chapter 4
IP Telephony, Video, & Web Collaboration
Specifications Feature
Cisco ICS 7750
System Switch Processor
Fixed slot card; 10/100BaseT autosensing data switch; Two-port RJ-45 connectors
System Alarm Processor
Fixed slot card; Two serial ports; One console port; Resource Cards
System Processing Engine
Universal slot card; Intel Pentium II 266 MHz CPU; 256, 512 MB SRAM; 6.4 GB hard disk drive
Multiservice Route Processor
Universal slot card; Standard memory: 32 MB DRAM; Memory upgrade (option): 4, 8, 16, 32 MB DRAM; Two modular voice/WAN interface (VWIC) card slots per card; Advanced data networking feature support, including: VPN, IPSec 56 and 3DES, Firewall
Dimensions and Weight (HxWxD)
Dimensions: 15.75 x 17.25 x 12.5 in. (40.005 x 43.815 x 31.75 cm); Weight (basic configuration-1 trunk, 1 sbc, 1 bps, 1 alarm (a total of 4 cards) and 1 power supply): 42 lb (18.9 kg)
Mounting Options
19 in rack-mount; Standalone
Selected Part Numbers and Ordering Information1 Cisco ICS 77501 Six-slot ICS chassis, SPE200, SSP, SAP, Power Supply & DOC-CD System Processing Engine 200 (512MB RAM) System Processing Engine 200 - Redundant Multiservice Route Processor 200 UPS with Standard Battery Pack, Ethernet Card Additional External Battery Pack for UPS Base Unit Catalyst 3524-PWR-XL Enterprise Edition AC Power Supply for ICS 7750 Chassis Fan Tray for ICS-7750 IPCC AGENT LICENSE ICM Evaluation Suite Dynamic Content Adapter Solaris 56bit Encrypt Dynamic Content Adapter Solaris 128bit Encrypt ICS-7750 Six-slot chassis & Fan Tray System Alarm Processor for ICS 7750 System Switch Processor for ICS 7750 System Processing Engine 200 (512MB RAM) Multiservice Route Processor 200
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
ICS-7750 SPE200 SPE200-RED MRP200 UPS-BASE-UNIT= UPS-BATT-PACK= WS-C3524-PWR-XL-EN PWR-AC-7750= FAN-TRAY-7750= ICS-20232 ICS-20300-EV ICS-30111-S-K8 ICS-30111-S-K9 ICS-7750-CHASSIS= SAP-7750= SSP-7750= SPE200= MRP200=
Cisco ICS 7750 WAN Interface Card (WIC) Modules WIC-1DSU-T1= WIC-1T= WIC-2T= WIC-2A/S= WIC-1DSU-56K4= WIC-1B-S/T= WIC-1B-U=
1-Port T1/Fractional T1 DSU/CSU WAN Interface Card 1-Port Serial WAN Interface Card 2-Port Serial WAN Interface Card spare 2-Port Async/Sync Serial WAN Interface Card spare 1-Port 4-Wire 56Kbps DSU/CSU WAN Interface Card 1-Port ISDN WAN Interface Card(dial and leased line) 1-Port ISDN with NT-1 WAN Interface Card dial and leasedline
Cisco ICS7750 Voice Interface Card (VIC) Modules VIC-2FXS VIC-2FXO VIC-2E/M VWIC-1MFT-T VWIC-2MFT-T1
Two-port FXS voice/fax interface card Two-port FXO voice/fax interface card Two-port E&M voice/fax interface card One-port T1/fractional T1 multiflex trunk with CSU/DSU Dual-port T1/fractional T1 multiflex trunk with CSU/DSU
Cisco ICS7750 Packet Voice/Fax DSP Modules PVDM-4= PVDM-256K-16= PVDM-256K-20=
4-Channel Packet Voice/Fax DSP Module (also available in 8 and 12 channels) 16-Channel Packet Voice/Fax DSP Module 20-Channel Packet Voice/Fax DSP Module
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the ICS 7750 Web site: http://www.cisco.com/go/ics7750 Cisco ICS 7750 Integrated Communications System
4-15
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco IAD 2400 Series Integrated Access Device with IP Keyswitch Functionality1 The Cisco IAD 2400 Series integrated access devices (IADs) combine data, voice, and video services over IP and ATM networks to provide cost-effective and efficient means of delivering high-speed Internet and voice services to small- and medium-sized business customers—all in a small (1 RU) system. When configured with optional IP Keyswitch software, the IAD 2400 is ideal for delivering converged LAN IP telephony in small office environments (5-20 phones) that do not require CallManager functionality.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco IAD 2400 Series
Business-class, fully integrated access device • IP-based Keyswitch functionality, ideal for small offices (5-20 phones) that do not need Cisco CallManager capabilities • Support for standard phones and IP phones on a single platform • 8 FXS/16 FXS/16FXS+8FXO analog voice ports and 1 T1 digital voice port models • T1, ADSL and G.shdsl WAN interfaces
Key Features –
Combines high-speed Internet access and toll-quality voice services on single IOS-based platform (IP Keyswitch1 introduced in Cisco IOS Release 12.1(5)YD)
–
Offers TDM, VoIP, and VoATM (AAL2) on a single platform
–
Seamless migration of customers from TDM-based GR-303 to packet-based GR-303 networks or to call agent-based networks
–
Automated remote installation and configuration enabled via Simple Network- enabled Auto Provisioning & Cisco Configuration Express tool
Competitive Products Accelerated Networks: AN30, AN32 Coppercom: MXR 400 Jetstream: IAD 802, IAD-Flex, IAD1601
Efficient: SpeedStream 7800, 8000 Polycom: NetEngine 6200, 7200, and 8000 RAD: LA-140, LA-240
Specifications Feature
IAD 2421
IAD 2423
IAD 2424
Fixed LAN Ports Fixed WAN Ports Modular Slots Voice Ports
1-port Ethernet (10BASE-T) 1-port T1 None Analog: 8FXS, 16FXS, 16FXS+8FXO; Digital: 1 T1 80 MHz (RISC) 16 MB (Default); 32 MB (Max) 64 MB 1.7 x 17.5 x 11.3 in.
Same as IAD 2421 1-port ADSL None Analog: 8FXS, 16FXS; Digital: 1 T1
Same as IAD 2421 1-port G.SHDSL None Analog: 8FXS, 16FXS, 16FXS+8FXO; Digital: 1 T1 Same as IAD 2421 16 MB (Default); 32 MB (Max) 64 MB Same as IAD 2421
Processor Speed (type) Flash Memory DRAM Memory Dimensions (HxWxD)
Same as IAD 2421 16 MB (Default); 32 MB (Max) 64 MB Same as IAD 2421
For More Information See the Cisco IAD 2400 Web site: http://www.cisco.com/go/2400 1. IP Keyswitch capabilities also available with 2600 and 3600 series routers; see IP Keyswitch Web site: http://www.cisco.com/go/keyswitch
Cisco IAD 2400 Series Integrated Access Device with IP Keyswitch Functionality
4-16
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco Voice Gateways Voice Gateways interface directly to PBXs or public telephone networks to carry voice traffic across IP networks—by converting IP calls to standard telephony calls and vice versa. They provide connectivity between packet telephony and legacy telephony such as PSTN, PBX, fax machines, and other devices. Cisco’s full line of multiservice routers can add analog and digital voice gateway functionality through the use of network modules and voice interface cards.1 Cisco also offers the following dedicated analog and digital voice gateways, the Cisco VG200 and the Cisco DT-24+ and DT-30+.
Cisco VG200 Voice Gateway Key Features for Cisco VG200 • Supports small offices and enterprise applications • Supports H.323 & MGCP and several voice codecs such as G.711, G.729, G.723.1 • Transcoding & conference services with optional DSP Farm network module • With DHCP, automatically obtains IP address & identifies appropriate CallManager • Single point of configuration and administration via Cisco CallManager • Managable with SNMP or CLI via Telnet; manage software downloads via TFTP
• Supplementary services (hold, transfer, conference, park, etc.) Selected Part Numbers and Ordering Information Cisco VG200, Voice Interface Cards (VIC), and Network Modules (NM) CAG-VG200 NM-1V(=) NM-HDV-1T1-24E(=) NM-HDV-1E1-30E(=) VIC-2FXS(=) VIC-2FXO-M1(=) VIC-2BRI-S/T-TE(=) NM-HDV-FARM
Cisco IP Telephony Voice Gateway (uses standard VIC & NM for voice interfaces) One-slot voice/fax NM (also available in 2-slot) Single-port enhanced 24-channel T1 voice/fax network module (also available in dual 48-channel T1) Single-port enhanced 30-channel E1 voice/fax network module (also available in dual 60-channel E1) Two-port FXS voice/fax interface card (also available in E&M, FXO, & FXO for Europe, Australia versions) Two-port FXO voice/fax interface card with battery reversal detection can caller ID support (for US, Canada and others) [enhanced version of the VIC-2FXO] (also available for Europe) Two-port BRI voice/fax interface card (terminal side) (also available in network & terminal sides version) Transcoding / Conferencing Services DSP FARM network module
Cisco DT-24+ and DT-30+ Digital IP Telephony Gateways DT-24+= DE-30+=
Cisco Model DT-24+ Digital Gateway Card Cisco Model DE-30+ Digital Gateway Card
Cisco DT-24+ and DT-30+ Digital IP Telephony Gateways (PCI Bus Cards) These gateways are single PCI bus-based cards that mount in PCs, where they only draw power. They allow connections between IP telephony networks and public telephony networks via T1 or E1 (RJ-48C interface). DT-24+ supports T1 PRI ISDN or T1 CAS Feature Group-D (Call Manager 3.1) for up to 24 calls.
1. Please see the 1700, 2600, 3600, 7200, 5x00 series in Chapter 1—Routers, Chapter 7—Access Products.
Cisco Voice Gateways
4-17
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
• ISDN PRI (T1/E1) (network and user side); T1/E1-CAS; BRI; E&M; FXS; FXO (loop and ground start)
Chapter 4
IP Telephony, Video, & Web Collaboration
DT-30+ supports E1 PRI ISDN for up to 30 calls. Both support DTMF signaling, echo cancellation, and multiple codecs including G.711, G.723.1 , G.729(a), and others.
For More Information See the Cisco Voice Gateways Web site: http://www.cisco.com/go/voicegate
Cisco IP/VC 3500 Series Videoconferencing Products The IP/VC 3500 series is for enterprises and service providers who want a reliable, easy-to-manage, cost-effective network infrastructure for videoconferencing over their IP networks. This product family also integrates with legacy H.320 networks. The new IP/VC 3500 Series consists of the IP/VC 3510 Multipoint Control Unit, the IP/VC 3520 and 3525 Gateways, and the IP/VC 3530 Video Terminal Adapter. In addition, the Cisco Multimedia Conference Manager is an H.323 gatekeeper/proxy. The Cisco IP/VC product family is designed to work with H.323-standards based videoconference client devices from a variety of vendors. The Cisco IP/VC 3510 Multipoint Control Unit (MCU) enables conferences between three or more endpoints. Multiple participants in multiple locations can attend the same meeting with full real-time interactivity. It runs unattended—there is no need to schedule conferences in advance. The IP/VC 3520 and the IP/VC 3525 Gateways are self-contained systems that translate between H.323 and H.320 protocols. Like the IP/VC 3510 MCU, the IP/VC Gateways offer built-in gatekeeper functions for small videoconferencing networks, a compact design, and reliable RISC architecture. The IP/VC 3530 Video Terminal Adapter (VTA) is a self-contained video interface that connects one H.320 system to a LAN. It offers two V.35 WAN interfaces, EIA/TIA-366 signaling, a low-profile compact design, and RISC architecture to ensure reliability and easy installation. The Multimedia Conference Manager (MCM) software is part of Cisco IOS Software and is available across a wide range of Cisco router platforms, including the Cisco 2500, 2600, and 3600 series, and the MC3810. It functions as an H.323 gatekeeper and proxy, enabling network managers to control bandwidth and priority settings for H.323 videoconferencing services.
Selected Part Numbers and Ordering Information1 Cisco IP/VC 3500 Series Videoconferencing Products1 IPVC-3510-MCU IPVC-3525-GW-1P IPVC-3530-VTA SF362CU-11.3.8N
IP/VC 3510 H.323 Videoconference Multipoint Control Unit IP/VC 3525 H.320-H.323 Videoconf. Gateway-1 PRI (V.35 and BRI versions also available) IP/VC 3530 H.320 Videoconference Terminal Adapter Cisco 3620 Series IOS IP/H3232
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the IP/VC 3500 series Web site: http://www.cisco.com/go/ipvc Cisco IP/VC 3500 Series Videoconferencing Products
4-18
Chapter 4
IP Telephony, Video, & Web Collaboration
Cisco IP/TV 3400 Series Video Servers The new Cisco IP/TV 3400 series servers represent complete, scalable, bandwidth-efficient solutions for next generation, high-quality video communications over enterprise networks. These servers support live video, scheduled video, video on demand (VOD), and a wide range of video management functions. They enable a broad spectrum of applications for enterprise communications including training, corporate communications, business TV, and distance learning. The updated Cisco IP/TV 3400 series servers consist of the Cisco IP/TV 3411 Control Server, the Cisco IP/TV 3422 and 3423 Broadcast Servers, the Cisco IP/TV 3431 Archive Server and the Cisco IP/TV 3415 Video Starter System. Each server comes preconfigured with feature-rich IP/TV client-server software. This product family offers a range of choices to best suit large-scale enterprise applications, performance requirements, and bandwidth availability.
Selected Part Numbers and Ordering Information1 Cisco IP/TV 3400 Series Video Servers1 IPTV-3411-CTRL IPTV-3415-START IPTV-3431-ARCH IPTV-3423-BCAST
Cisco IP/TV 3411 Control Server Cisco IP/TV 3415 Starter System w/ MPEG1, MPEG2 Half D1 Cisco IP/TV 3431 Archive Server Cisco IP/TV 3423 Broadcast Server MPEG4,MPEG1,MPEG2 Full D1
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
See the IP/TV 3400 series Web site: http://www.cisco.com/go/iptv
Web Collaboration—Cisco Collaboration Server The Cisco Collaboration Server (CCS) enables customers to interact with your customer service representatives over the Web while conducting a text chat conversation. They can share Web pages, complete on-line forms in a collaborative fashion, and share any Windows desktop application using nothing more than their Web browsers. By facilitating effective, personalized assistance designed to greatly enhance the customer experience, CCS is an ideal solution for both sales- and service-oriented customer service organizations.
Selected Part Numbers and Ordering Information1 Cisco Collaboration Server1 ICS-30310-N ICS-30310-S
Collaboration Server NT/Win2K Collaboration Server Solaris
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Collaboration Server Web site: http://www.cisco.com/go/ccs Cisco IP/TV 3400 Series Video Servers
4-19
CHAPTER 4 IP TELEPHONY, VIDEO, & WEB COLLABORATION
For More Information
CH A P T E R
5
VPN and Security Products VPN and Security Products at a Glance Product
Features
Page
Cisco PIX Firewall
High performance stateful inspection firewalling • Secure integrated appliance • Reliable hot-standby failover • Standards-based VPN
5-2
Cisco IOS Firewall Feature Set
Value-added option that provides advanced firewall-specific capabilities • Stateful packet filtering via context-based access control (CBAC) • Intrusion detection for real-time response to network attacks • Dynamic, network-to network, per-user authentication and authorization via TACACS+ and RADIUS
5-4
Cisco Secure Scanner Proactive network security analysis system (formerly NetSonar) • Comprehensive security assessment and reporting tool
5-5
• Robust network inventory and mapping system • Measure security, manage risks, eliminate security vulnerabilities
Cisco Secure Policy Manager
Policy-based security management system for Cisco firewalls, VPNs, and Intrusion Detection System sensors • Innovative approach to security management • Manages multiple firewalls from a central location
Cisco Secure Intrusion Real-time intrusion detection system Detection System • Real-time blocking of unauthorized activity (formerly NetRanger) • Transparent to legitimate traffic
5-7
5-9
• Support for a range of speeds and interface types • Highly scalable
Cisco Secure Access Control Server
High-performance user access control framework • Full RADIUS and TACACS+ support • Supports LDAP user authentication • Data replication and backup services • Flexible user and group policy controls • New support for Cisco Wireless solutions
Cisco 7100 Series
Large branch and central site VPN router 5-13 • Comprehensive suite of VPN services, including encryption, tunneling, firewall, and bandwidth management • Embedded I/O for ease of deployment • Service module slot for IPSec and PPTP encryption coprocessing • Dedicated Site-to-Site VPN router 5-16
• Has models for all size companies, from small to large enterprise organizations • Reduces communications expenditures • Enables users to easily add capacity and throughput
Cisco VPN 5000 Series • Up to 40,000 simultaneous IPSec (DES or 3DES), L2TP or PPP tunnels per platform • • • •
5-19
Up to 760 Mbps 3DES throughput Broadest VPN Client platform support available (Win 95/98/NT/2000, Mac OS, Linux, & Solaris) Tunnel mapping from IPSec or L2TP LNS into 802.1Q VLANs, Frame Relay PVCs, IPSec, GRE CLI or GUI management (including a provisioning system for integration with an OSS)
Cisco 1700, 2600, 3600, Wide variety of modular router platforms with options for IOS-based and hardware-enabled VPN Chapter 1 7200, and 7400 Series and security support. See individual product pages and Cisco IOS Firewall Feature Set (page 5-4). Routers
VPN and Security Products at a Glance
5-1
CHAPTER 5 VPN AND SECURITY PRODUCTS
Cisco VPN 3000 Family Remote access Virtual Private Network platform
5-11
Chapter 5
VPN and Security Products
Cisco PIX Firewall Series The Cisco PIX Firewall series delivers strong security in an easy-to-install, integrated hardware/software firewall appliance that offers outstanding performance. Cisco's world-leading PIX Firewall family spans the entire user application spectrum, from cost-conscious desktop firewalls for remote offices to carrier-class gigabit firewalls for the most demanding enterprise and service provider environments. Cisco PIX Firewalls deliver superior performance of up to 500,000 simultaneous connections and nearly 1.7 Gbps throughput—providing world-class security, reliability and customer service.
When to Sell Sell This Product
When a Customer Needs These Features
PIX 506
• Remote Office Branch Office desktop firewall appliance • Low entry price • Maximum of two 10BASE-T Ethernet interfaces
PIX 515
• Small Medium Business (SMB) firewall appliance • Three to six 10/100 FE interfaces
PIX 525
• Enterprise firewall appliance • Gigabit Ethernet support • Up to eight 10/100 FE or Gigabit Ethernet interfaces
PIX 535
• • • •
Carrier class large enterprise and service provider firewall appliance Gigabit Ethernet throughput Up to ten 10/100 FE or Gigabit Ethernet interfaces Redundant, hot-swappable power supplies
Key Features • Security—Purpose-built firewall appliance with a proprietary, hardened operating system that eliminates security holes • Performance—Stateful connection-oriented firewall capable of 500,000 concurrent connections and 1.7 Gbps of throughput • Reliability—High availability support via a redundant hot standby unit that maintains concurrent connections through automatic stateful synchronization • Virtual Private Network (VPN)—Support for both standards-based IPsec and L2TP/PPTP-based VPN services • Optional PIX VPN Accelerator Card—3DES VPN throughput can scale to nearly 100 Mbps, encryption/decryption processes handled by specialized coprocessors • Network Address Translation (NAT) and Port Address Translation (PAT)—Conceals internal IP addresses and expands network address space • Denial-of-Service (DoS) Attack Protection—Protects the firewall, as well as internal servers and clients, from disruptive hacking attempts • Web-Based PIX Device Manager (PDM)—For configuration and usage reports Cisco PIX Firewall Series
5-2
Chapter 5
VPN and Security Products
• Platform Extensibility—Support from two 10/100 Ethernet interfaces up to ten Gigabit Ethernet interfaces • Low Cost of Ownership—Simple installation and configuration for minimal time investment combined with impressive price/performance
Competitive Products • Check Point Software Technologies: FireWall-1 • WatchGuard Technologies: Firebox
• NetScreen Technologies: NetScreen Security Appliances
Specifications Feature
PIX 506
PIX 515
PIX 525
PIX 535
Processor
200 MHz
200 MHz
350 MHz
1.0 GHz
RAM
32 MB
32 or 64 MB
128 or 256 MB
512 MB or 1 GB
Flash Memory
8 MB
16 MB
16 MB
16 MB
PCI Slots
None
2
3
9
Fixed Interfaces
Two 10BASE-T Ethernet
Two 10/100 Fast Ethernet Two 10/100 Fast Ethernet None
Maximum Interfaces
Two 10BASE-T Ethernet
Six 10/100 Fast Ethernet (FE)Eight 10/100 FE or GE
10-10/100 FEor GE
Yes
Yes
Yes
No Option for VPN Accelerator Card (VAC)
Failover Support
No
Yes UR only
Yes UR only
Yes UR only
Size
Desktop
1 RU
2 RU
3 RU
Selected Part Numbers and Ordering Information1 Cisco PIX Bundles1 PIX-535-UR-BUN PIX-535-R-BUN PIX-535-FO-BUN PIX-525-UR-BUN PIX-525-R-BUN PIX-525-FO-BUN PIX-515-UR-BUN PIX-515-R-BUN PIX-515-FO-BUN
PIX 535 Unrestricted Bundle (Chassis, unrestricted license, two 10/100 ports) PIX 535 Restricted Bundle (Chassis, restricted license, two 10/100 ports) PIX 535 Failover Bundle (Chassis, failover license, two 10/100 ports) PIX 525 Unrestricted Bundle (Chassis, unrestricted software, two 10/100 ports) PIX 525 Restricted Bundle (Chassis, restricted software, two 10/100 ports) PIX 525 Failover Bundle (Chassis, failover software, two 10/100 ports) PIX 515 Unrestricted Bundle (Chassis, unrestricted software, two 10/100 ports) PIX 515 Restricted Bundle (Chassis, restricted software, two 10/100 ports) PIX 515 Failover Bundle (Chassis, failover software, two 10/100 ports)
PIX-1GE-66 PIX-1GE PIX-4FE PIX-1FE PIX-VPN-ACCEL
CHAPTER 5 VPN AND SECURITY PRODUCTS
Cisco PIX Interfaces and Cards Single 66-MHz Gigabit Ethernet interface for PIX 53x (multimode fiber, SC connector) Single Gigabit Ethernet Interface for PIX 52x Four-port 10/100 Fast Ethernet interface Single-port 10/100 Fast Ethernet interface IPSec Hardware VPN Accelerator Card (VAC)
Cisco PIX VPN Feature Licenses PIX-VPN-3DES PIX-506-SW-3DES PIX-VPN-DES
168-bit 3DES IPSec VPN software license 168-bit 3DES IPSec VPN software license for PIX 506 56-bit DES IPSec VPN software license
PIX Accessories PIX-506-PWR-AC PIX-515-PWR-DC
Redundant AC power supply for PIX 506 (also available for PIX 515, PIX 525, and PIX 535) Redundant DC power supply for PIX 515 (also available for PIX 525 and PIX 535)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the PIX Firewall Web site: http://www.cisco.com/go/pix Cisco PIX Firewall Series
5-3
Chapter 5
VPN and Security Products
Cisco IOS Firewall Feature Set The Cisco IOS Firewall Feature Set enriches Cisco IOS Software security capabilities, integrating robust firewall functionality and intrusion detection for every network perimeter. When combined with Cisco IOS IPSec software and other Cisco IOS Software-based technologies such as L2TP tunneling and quality of service (QoS), it provides a complete, integrated virtual private network solution. Because it is available for a wide range of Cisco routers, it gives customers the flexibility to choose a solution that meets their bandwidth, LAN/WAN density, and multiservice requirements, while benefiting from advanced security.
When to Sell Sell This Product When a Customer Needs These Features • • • • • • •
Cisco IOS Firewall Feature Set
An integrated firewall solution with powerful security and multiprotocol routing all on the same platform Scalability options from the Cisco 800 up to the Cisco 7200 Low cost solution where high performance is not a requirement For secure extranet and intranet perimeters and Internet connectivity for branch and remote offices Secure remote access or data transfer via a Cisco IOS Software-based VPN solution Real-time integrated intrusion detection system (IDS) to complement firewall or existing IDS (Cisco Secure IDS) Security and access to the network on a per-user basis
Key Features • Context-based access control (CBAC) provides secure, stateful, application-based filtering, supporting the latest protocols and advanced applications • Intrusion detection for real-time monitoring, interception, and response to network misuse • Dynamic, per-user authentication/authorization for LAN, WAN, & VPN clients • Graphical configuration and management via ConfigMaker Security Wizard • Provides strong perimeter security for a complete Cisco IOS Software-based VPN solution, including IPSec, QoS, & tunnelling for range of Cisco routers
Competitive Products • Lucent (Ascend): SecureAccess Firewall • Nokia: IP400 Series
• Nortel: BaySecure Firewall-1
Specifications Feature
Cisco IOS Firewall
Supported Network Interfaces
All network interfaces on supported platforms
Supported Platforms
Cisco 1720, 2600, 3600, 7100, and 7200 series router platforms (supports full feature set) Cisco 800, UBR900, 1600, and 2500 series router platforms include all firewall features with exception of intrusion detection and authentication proxy
Simultaneous Sessions
No maximum; dependent on platform, network connection, and traffic
Part Numbers and Ordering Information For Cisco IOS Images containing firewall (FW) and intrusion detection (IDS) capabilities, see individual product pages of supported platforms and the Cisco IOS Feature Navigator at http://www.cisco.com/go/fn (CCO login required) for part numbers and more info.
For More Information See the Cisco IOS Firewall Feature Set Web site: http://www.cisco.com/go/csis Cisco IOS Firewall Feature Set
5-4
Chapter 5
VPN and Security Products
Cisco Secure Scanner Proactive, preventative security—The Cisco Secure Scanner (formerly NetSonar) is an enterprise-class software tool offering superior network system identification, innovative data management, flexible user-defined vulnerability rules, comprehensive security reporting capabilities. The Scanner is a key component in Cisco’s end-to-end network security solutions. It allows users to measure security, manage risk, and eliminate security vulnerabilities, thereby enabling more secure network environments.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Secure Scanner
• The ability to measure and reduce their security exposure • A method to improve network security • A process to define and validate security policies
Key Features • Flexible licensing designed to serve the changing needs of customers and to provide unprecedented scanning flexibility • Easy-to-use interface allows quick a network scan without pre-existing knowledge of the network or security vulnerabilities • Comprehensive scanning engine that can analyze and identify targeted networked systems—including Web servers, firewalls, routers, switches, and workstations • Flexible data analysis and reporting capabilities, including graphics-generating features and report wizard • User-defined implementation options, including scheduling, specialized profiles, and customized scanning rules for legacy or proprietary systems
• Regular vulnerability updates of signature and rules files on a bi-monthly schedule • Extensive network security database with descriptions of security problems and options to fix them
Competitive Products • Axent: NetRecon • ISS: Internet Scanner
• NAI: CyberCop Scanner
Cisco Secure Scanner
5-5
CHAPTER 5 VPN AND SECURITY PRODUCTS
• Unique matrix browser and display technology that allows users to easily navigate through data
Chapter 5
VPN and Security Products
Specifications Minimum System Requirements for Secure Scanner on Windows NT
Minimum System Requirements for Secure Scanner on Solaris
Hardware
Pentium II 450 MHz PC CD-ROM drive TCP/IP network interface Screen resolution of 800 x 600 or greater
Sun SPARC 10 Pentium II 450 MHz PC CD-ROM drive TCP/IP network interface Screen resolution of 800 x 600 or greater
Operating System
Windows NT 4.0 Workstation/Server Windows 2000 Professional/ Server Service Pack 5 or later
Solaris 2.6, 2.7, or 2.8 (for SPARC) Solaris 2.6, 2.7, or 2.8 (for Pentium)
Software
Internet Explorer 4.0 or later Netscape Navigator 2.0 or later
Netscape Navigator 2.0 or later
Disk Space
2 GB hard drive
2 GB hard drive
Memory
64 MB (96 MB recommended)
64 MB (96 MB recommended)
User Privileges
Local or domain administrator
Root
Feature
Selected Part Numbers and Ordering Information1 Cisco Secure Scanner1 NS-201-NT-2500 NS-201-S-2500
Scanner 2.0.1 for NT (Up to 2500 Addresses) Scanner 2.0.1 for Solaris (Up to 2500 Addresses)
Cisco Secure Scanner Software Application Support (SAS) Maintenance CON-SAS-NS-NT CON-SAS-NS-SOL
SAS Maintenance for Scanner for NT SAS Maintenance for Scanner for Solaris
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Secure Scanner Web site: http://www.cisco.com/go/scan
Cisco Secure Scanner
5-6
Chapter 5
VPN and Security Products
Cisco Secure Policy Manager Cisco Secure Policy Manager (CSPM) is a scalable, powerful policy-based security management system for Cisco firewalls, IPSec VPN routers, and Intrusion Detection System (IDS) sensors. With CSPM, Cisco customers can define, distribute, enforce, and audit network-wide security policies from a central location. CSPM streamlines the tasks of managing complicated network security elements, such as perimeter access control, IDS, Network Address Translation (NAT) and IPSec-based VPNs. As the management cornerstone of the Cisco end-to-end security product line, CSPM can greatly simplify firewall, IDS, and VPN deployment in enterprise and service provider networks. CSPM's simple GUI allows administrators to visually define high-level security policies for multiple Cisco firewalls and VPN routers. These policies can be distributed throughout the network from a central location, thus completely eliminating the costly time-consuming manual implementation of security configurations on a command-by-command and device-by-device basis. CSPM also provides basic system auditing functions, including real-time alarm notification and a Web-based reporting system.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Secure Policy Manager
• • • • • •
Security administration for multiple PIX firewalls within their corporate network An easy way to define network security policies based on their business objectives Security administration for VPNs including site-to-site VPNs NT-based IDS configuration and monitoring platform End-to-end security management Abstract complexity of IOS and PIX CLI
Key Features
• Provides configuration of remote PIX firewalls • High-level policy configuration for IPSec environments • Easy mechanism to define and manage Network Address Translation (NAT) policies for Cisco PIX firewalls • High-level security policy management that allows an administrator to easily define security policies based on business objectives • Includes an auditing and reporting system to validate and monitor that status of network security policies • Site-to-site VPN management • Offers NT-based IDS configuration and monitoring • Network topology viewer • Import topology from CiscoWorks2000 Cisco Secure Policy Manager
5-7
CHAPTER 5 VPN AND SECURITY PRODUCTS
• Powerful security management system for networks containing multiple, distributed Cisco Secure PIX firewalls • Offers scalability by providing management support for up to 500 Cisco PIX firewalls and Cisco routers • Distributed architecture to support PIX firewalls in Internet, intranet, and extranet environments
Chapter 5
VPN and Security Products
Competitive Products • Axent: Raptor Firewall and Raptor Firewall Management Console • Network Associates, Inc.: Gauntlet Firewall • Checkpoint: Firewall-1
Specifications Feature
Recommended Requirements for Cisco Secure Policy Manager
Operating System Support
Policy Manager client: Windows 98, Windows 2000 or Windows NT 4.0 with Service Pack 6aPolicy server: Windows NT 4.0 with Service Pack 6a
Web Browser Support
Microsoft Internet Explorer v5.51 or higher
Processor Speed (type)
800 MHz or faster (Pentium II)
Memory
1 GB RAM or greater
Hard Drive
4 GB free space available (for the application and database)
Video Display
1024 x 768 video adapter card capable of at least 64,000 colors
Devices Supported
PIX firewalls with software version 4.2.4 or higher IDS with versions 2.2, 2.5, 2.6 IOS 12.05t or higher
1. Microsoft Internet Explorer is used for the embedded on-line HTML help system and is required for installation.
Selected Part Numbers and Ordering Information1,2 Cisco Secure Policy Manager12 SEC-POL-MGR-2.3-UR SEC-POL-MGR-2.3-R
Unrestricted CSPM license Restricted (LITE) CSPM license. Supports up to three devices
1. CSPM version 2.3 does not require an upgrade part number for CSPM 2.0/2.1/2.2 users. 2. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Secure Policy Manager Web site: http://www.cisco.com/go/csm
Cisco Secure Policy Manager
5-8
Chapter 5
VPN and Security Products
Cisco Secure Intrusion Detection System Cisco Secure Intrusion Detection System (formerly NetRanger) delivers a family of high-performance, security surveillance solutions for both enterprise and service-provider networks. Designed to address the increased requirements for security visibility, denial-of-service (DoS) protection, antihacking detection, and e-commerce business defenses, Cisco Secure IDS leads the market in innovative security monitoring solutions. This product line consists of sensing devices and a central management console. Sensors, which are high-speed security analysis devices, analyze packets traversing the network to determine if the traffic is authorized or malicious. If the data stream in a network exhibits unauthorized or suspicious activity, sensors can detect the policy violation in real time, terminate the offending session(s), and send alarms back to a central management console. The management console, called the Director, is a high-performance software-based management system that centrally monitors the activity of multiple sensors, provides a visual alarm display, and acts as a remote system configuration utility. The current Cisco Secure IDS sensing portfolio includes the IDS 4210 Sensor appliance, IDS 4230 Sensor appliance, and Catalyst 6000 Intrusion Detection System Module (IDSM).
When to Sell When a Customer Needs These Features
Cisco Secure IDS Sensors
• A network-based, real-time intrusion detection system capable of monitoring an entire enterprise network • A robust, 24 hour x 7 day-a-week monitoring and response system with the latest attack detection capabilities • A distributed intrusion detection system capable of directing and forwarding alarms between local, regional, and headquarters-based monitoring consoles • A scalable architecture to allow the deployment of large numbers of sensors in order to provide comprehensive security coverage in large network environments. • An intrusion detection system designed to integrate smoothly with existing network management tools and practices • With the addition of the IDS Module card to its portfolio, Cisco continues to demonstrate investment protection in its switched infrastructure; the IDS Module enables customers to perform both security monitoring and switching functions within the same chassis
Key Features • Market-leading technology • Sophisticated attack detection and antihacking protection • Transparent operation • Pervasive platform support • Scalable sensing performance • Integrated solution with the Catalyst 6000 IDS Module • Powerful management and monitoring • Investment protection • Active response Cisco Secure Intrusion Detection System
5-9
CHAPTER 5 VPN AND SECURITY PRODUCTS
Sell This Product
Chapter 5
VPN and Security Products
Competitive Products • Axent: NetProwler • Network Flight Recorder, Inc.: NFR
• Internet Security Systems (ISS): Real Secure
Specifications Feature
IDS-4210
IDS-4230
Performance
45 Mbps
100 Mbps
IDS Module 100 Mbps
Processor
Celeron 566 MHz
Dual PIII-600 MHz
Custom Hardware
RAM
256 MB
512 MB
256 MB
Network Interface Card
Autosensing 10/100 BASE-T Ethernet
Autosensing 10/100 BASE-T Ethernet
PCI
Command and Control Interface
Autosensing 10/100 BASE-T Ethernet
Autosensing 10/100 BASE-T Ethernet
PCI
Selected Part Numbers and Ordering Information1 CiscoSecure IDS1 IDS-4210 IDS-4230-FE WS-X6381-IDS
IDS 4210 sensor appliance supports up to 45 Mbps with single 10/100BASE-T Ethernet interface IDS 4230 sensor appliance supports up to 100 Mbps with single 10/100BASE-T Ethernet interface Intrusion Detection System Module for Catalyst 6K Switch
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
Note
Export Considerations: The CS IDS 4210, CS IDS 4230, and CS IDSM are subject to export controls. Please refer to the export compliance Web site at http://www.cisco.com/wwl/export/crypto/ for guidance. For specific export questions, please contact
[email protected] .
For More Information See the CiscoSecure IDS Web site: http://www.cisco.com/go/ids
Cisco Secure Intrusion Detection System
5-10
Chapter 5
VPN and Security Products
Cisco Secure Access Control Server for Windows 2000 and NT Cisco Secure Access Control Server (ACS) for Windows 2000 and NT is a highly scalable, high performance access control server that operates as a centralized RADIUS or TACACS+ server system and controls the authentication, authorization, and accounting (AAA) of users accessing corporate resources through the network. Cisco Secure ACS supports access control and accounting for dial-up access servers, VPNs and firewalls, Voice over IP (VoIP) solutions. With Version 2.6 and the new Extensible Authentication Protocol (EAP) module, standards-based IEEE 802.1X authentication of Cisco's Aironet 350 Wireless Access users are enabled. It also allows distribution of wireless encryption keys using RADIUS.
When to Sell Sell This Product
When a Customer Needs These Features
CiscoSecure ACS for Windows NT
• Control who can login to the network via RADIUS • Centrally manage user privileges for the network • TACACS+ server for controlling administrative access/config to network
Key Features • Ease of Use—Web-based user interface simplifies and distributes configuration • Scalability—ACS supports large environments with support for redundant servers, remote databases, and user database backup services • Extensibility—LDAP authentication forwarding for authentication of user profiles stored in directories from key vendors such as Netscape, Novell, and Microsoft • Management—Windows 2000 Active Directory and NT database support consolidates Windows username/password management, and utilizes the Windows Performance Monitor for real-time statistics viewing
• Product Flexibility—ACS can be used with most Cisco router/network access servers, when running a RADIUS or TACACS+ embedded Cisco IOS version • Third-Party Support—Token Server support for RSA SecurID, Axent Technologies, Secure Computing and CryptoCard • Control—Dynamic quotas for time-of-day, network usage, number of logged sessions, and day-of-week access restrictions
Competitive Products • Funk: Steel Belted RADIUS • Lucent/Avaya: Security Management Server (LSMS)
• Nortel: Preside RADIUS Server (OEM of Funk product)
Cisco Secure Access Control Server for Windows 2000 and NT
5-11
CHAPTER 5 VPN AND SECURITY PRODUCTS
• Administration—Different access levels for each administrator and ability to group network devices to facilitate enforcement and changes of security policies
Chapter 5
VPN and Security Products
Specifications Feature
CiscoSecure Access Control Server
Platform
PC with Windows NT Server 4.0 and Service Pack 6 or Windows 2000 Server (up to Service Pack 2); Pentium 350-MHz processor or faster; Screen resolution of 256 colors at 800 x 600 lines
RAM
128 MB required
Disk Drive
150 MB of disk space
Software Requirements
Any Cisco or third-party access/management solution configurable as a TACACS+ or RADIUS client
Platform Requirements
Cisco IOS Software 11.1 or higher on Cisco Routing Solutions
Selected Part Numbers and Ordering Information1 CiscoSecure ACS1 CSNT-2.6 CSNT-2.6-UPG CSNT-2.6-EXC CON-SAS-CSNT
Cisco Secure ACS 2.6 for Windows 2000& NT Cisco Secure ACS 2.6 Upgrade from ACS 2.x Operating System Exchange--ACS 2.x on UNIX to ACS 2.6 ACS Software Application Support
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the CiscoSecure ACS Web site: http://www.cisco.com/go/ciscosecure
Cisco Secure Access Control Server for Windows 2000 and NT
5-12
Chapter 5
VPN and Security Products
Cisco 7100 Series The Cisco 7100 series VPN router is a high-end, integrated VPN solution that melds high-speed, industry-leading routing with a comprehensive suite of advanced site-to-site VPN services. The Cisco 7100 series VPN router integrates key features of VPNs—tunneling, data encryption, security, firewall, advanced bandwidth management, and service-level validation—to deliver self-healing, self-defending, VPN platforms that cost-effectively accommodate remote-office and extranet connectivity using public data networks. The Cisco 7100 series VPN router offers specific hardware configurations optimized for VPN applications and network topologies. Optional embedded WAN and Fast Ethernet interfaces combined with high-performance routing and rich VPN services provide turnkey VPN routing solutions.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco 7120
• Entry-level Cisco 7100 Series Router designed for large branch or central site VPN with VPN services throughput of up to 50 Mbps • Designed primarily for site-to-site VPN deployments with incidental remote access requirements
Cisco 7140
• High-end site-to-site VPN platform for central site VPN applications with VPN services throughput up to 140 Mbps • Provides superior routing and VPN services performance for central site environments, as well as dual WAN interfaces and power supplies for increased solution reliability
Key Features • Comprehensive suite of VPN services—tunneling, data encryption, security, firewall, advanced bandwidth management, and service level validation—integrated with industry leading routing • High performance RISC processor delivering high-speed, scalable VPN services and routing throughput and extensive memory for reliable, high-speed VPN services delivery
• Integrated Services Module (ISM) can be installed to support up to 2000 simultaneous tunneling sessions with 90 Mbps encryption performance and Windows 95/98/NT4.0 and Windows 2000 compatibility for remote access • Multi-ISA—Cisco 7140 supports IPSec on both ISM and ISA concurrently, which achieves 140 Mbps aggregate VPN performance; also scales VPN tunnels to 3000 tunnels
Competitive Products • Check Point: VPN-1 Appliance • Nortel: Contivity 4000, 4500
• Nokia: IP650
Cisco 7100 Series
5-13
CHAPTER 5 VPN AND SECURITY PRODUCTS
• Single and dual-homed embedded WAN interfaces ranging from nxT1/E1 to DS-3/E3 and OC-3 for connectivity to the VPN and embedded dual autosensing 10/100BASE-T Fast Ethernet ports for connectivity to the corporate LAN
Chapter 5
VPN and Security Products
Specifications Feature
Cisco 7120
Cisco 7140
Embedded Dual 10/100BASE-T Autosensing, RJ-45 Fast Ethernet Interfaces
Autosensing, RJ-45
EIA/TIA-232, EIA/TIA-449, X.21, V.35, EIA-530, Same as Cisco 7120 EIA/TIA-612, EIA/TIA-613, UNI 3.X, G.707, G.708, and SONET/SDH optical fiber (OC-3 or STM-1)
Physical Interfaces
WAN/LAN Interface Expansion 1 slot Slot
1 slot
Supported Network and Services Port Adapters
Gigabit Ethernet 1000BASE-SX and 1000BASE-LX/LH Fast Ethernet 100BASE-TX and 100BASE-FX Fast Ethernet/ISL TX and ISL FX Ethernet 10BASE-T and 10BASE-FL Dedicated Token Ring Multichannel T1 and E1 ATM Synchronous Serial HSSI ISDN BRI Packet over SONET OS3/STM1 Integrated Services Adapter
Same as Cisco 7120
Service Module Slot
1 slot
1 slot
Supported Service Modules
Integrated Services Module (ISM)
Integrated Services Module (ISM)
Console and Auxiliary Ports
1 of each, RJ-45 interface
1 of each, RJ-45 interface
SDRAM
64 MB packet 64 MB system (expandable to 256 MB)
64 MB packet 64 MB system (expandable to 256 MB)
Flash Memory
48 MB
48 MB
PCMCIA Slots for Flash Memory
2
2
Power Supply
Single AC
Dual AC
Dimensions (HxWxD)
3.5 in. x 17.5 in. x 18.25 in.
3.5 in. x 17.5 in. x 18.25 in.
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Software Feature Packs, you need, at a minimum, the amount of memory shown in the following table. Some configurations will require more than the recommended minimum. Distribution1 Part Number
Feature Pack Description
IOS Image Release
Flash Memory Required
DRAM Memory Required
CD71-CL-12.1.6E=
IP IPSEC 56
12.1(6)E
16MB
64MB
CD71-CK2-12.1.6E=
IP IPSEC 3DES
12.1(6)E
16MB
64MB
12.1(6)E
16MB
64MB
CD71-CHK2-12.1.6E= IP/FW/IDS IPSEC 3DES CD71-AL-12.1.6E=
Enterprise IPSEC 56
12.1(6)E
16MB
64MB
CD71-AK2-12.1.6E=
Enterprise IPSEC 3DES
12.1(6)E
16MB
64MB
12.1(6)E
16MB
64MB
CD71-AHK2-12.1.6E= Enterprise/FW/IDS IPSEC 3DES
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Infomation”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn
Selected Part Numbers and Ordering Information1 Cisco 7100 Series Bundles—71201 CISCO7120-4T1/VPN C7120-4T1/VPN/K9
7120-4T1 VPN Bundle, ISM, 2xFE, AC PS, IPSEC DES 7120-4T1 VPN Bundle, ISM, 2xFE, AC PS, IPSEC 3DES
Cisco 7100 Series
5-14
Chapter 5
VPN and Security Products
Cisco 7100 Series Bundles—7140 CISCO7140-2FE/VPN C7140-2FE/2VPN/K8 C7140-2FE/2VPN/K9 C7140-2FE/VPN/K9 CISCO7140-8T/VPN C7140-8T/VPN/K9
7140-2FE VPN Bundle, ISM, 2xFE, 2xAC PS, IPSEC DES 7140-2FE VPN Bundle, ISM & ISA, 2xFE, 2xAC PS, IPSEC DES 7140-2FE VPN Bundle, ISM & ISA, 2xFE, 2xAC PS, IPSEC 3DES 7140-2FE VPN Bundle, ISM, 2xFE, 2xAC PS, IPSEC 3DES 7140-8T VPN Bundle, ISM, 2xFE, 2xAC PS, IPSEC DES 7140-8T VPN Bundle, ISM, 2xFE, 2xAC PS, IPSEC 3DES
Cisco 7100 Port Adapters 1-port Fast Ethernet 100BaseTx Port Adapter 1-port Fast Ethernet 100BaseFx Port Adapter 2-port Fast Ethernet 100BaseTx Port Adapter 2-port Fast Ethernet 100BaseFx Port Adapter 2-port Token Ring ISL 100BaseTx Port Adapter 2-port Token Ring ISL 100BaseFx Port Adapter 4-port Ethernet 10BaseT Port Adapter 8-port Ethernet 10BaseT Port Adapter 5-port Ethernet 10BaseFL Port Adapter 4-port Serial Port Adapter, Enhanced 8-port Serial, V.35 Port Adapter 8-port Serial, 232 Port Adapter 8-port Serial, X.21 Port Adapter 4-port Dedicated Token Ring, 4/16Mbps, HDX/FDX Port Adapter Gigabit Ethernet Port Adapter 1-port HSSI Port Adapter 2-port HSSI Port Adapter 1-port ATM Enhanced DS3 Port Adapter 1-port ATM Enhanced E3 Port Adapter 1-port ATM Enhanced OC3c/STM1 Multimode Port Adapter 1-port ATM Enhanced OC3c/STM1 Singlemode(IR)Port Adapter 1-port ATM Enhanced OC3c/STM1 Singlemode(LR)Port Adapter 4-port E1 G.703 Serial Port Adapter (75ohm/Unbalanced) 4-port E1 G.703 Serial Port Adapter (120ohm/Balanced) 1-port E3 Serial Port Adapter with E3 DSU 2-port E3 Serial Port Adapter with E3 DSUs 1-port T3 Serial Port Adapter with T3 DSUs 2-port T3 Serial Port Adapter with T3 DSUs 2-port multichannel T1 port adapter with integrated CSU/DSUs 2-port multichannel E1 port adapter with G.703 120ohm interf 4-port multichannel T1 port adapter with integrated CSU/DSUs 8-port multichannel T1 port adapter with integrated CSU/DSUs 8-port multichannel E1 port adapter with G.703 120ohm interf 1-port Packet/SONET OC3c/STM1 Multimode Port Adapter 1-port Packet/SONET OC3c/STM1 Singlemode (IR) Port Adapter 1-port Packet/SONET OC3c/STM1 Singlemode (LR) Port Adapter Integrated Services Module for IPSec & MPPE encryption Integrated Services Adapter for IPSec or MPPE encryption 4-port BRI Port Adapter, U Interface 8-port BRI Port Adapter, S/T Interface
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco 7100 series Web site: http://www.cisco.com/go/7100
Cisco 7100 Series
5-15
CHAPTER 5 VPN AND SECURITY PRODUCTS
PA-FE-TX PA-FE-FX PA-2FE-TX PA-2FE-FX PA-2FEISL-TX PA-2FEISL-FX PA-4E PA-8E PA-5EFL PA-4T+ PA-8T-V35 PA-8T-232 PA-8T-X21 PA-4R-DTR PA-GE PA-H PA-2H PA-A3-T3 PA-A3-E3 PA-A3-OC3MM PA-A3-OC3SMI PA-A3-OC3SML PA-4E1G/75 PA-4E1G/120 PA-E3 PA-2E3 PA-T3 PA-2T3 PA-MC-2T1 PA-MC-2E1/120 PA-MC-4T1 PA-MC-8T1 PA-MC-8E1/120 PA-POS-OC3MM PA-POS-OC3SMI PA-POS-OC3SML SM-ISM SA-ISA PA-4B-U PA-8B-S/T
Chapter 5
VPN and Security Products
Cisco VPN 3000 Family The Cisco VPN 3000 Concentrator Series—A family of purpose-built, remote access Virtual Private Network (VPN) platforms that incorporates high availability, high performance and scalability with the most advanced encryption and authentication techniques available today. Customers can greatly reduce costs by leveraging their ISPs’ infrastructure and eliminate costly leased lines. This series supports small offices as well as large organizations with up to 10,000 simultaneous remote users per unit. With load balancing configured, multiple units can be clustered to enable unlimited remote access users. It also supports the widest range of VPN clients including Certicom MovianVPN client, Microsoft 2000 L2TP/IPsec Client, and Microsoft PPTP for Windows 95/98/ME/NT/2000. The Cisco VPN 3002 Hardware Client—Combines the best capabilities of a software client with the reliability and stability of a dedicated hardware platform, and scales to tens of thousands of users. It sets up connections to a variety of Cisco VPN concentrators, including the VPN 3000 series and PIX firewalls.
When to Sell Sell This Product
When a Customer Needs These Features
VPN 3005 and 3015 • A fixed configuration device designed for small- to medium-sized organizations with bandwidth requirements up to full-duplex T1/E1 (4 Mbps maximum performance) and up to 100 simultaneous remote access sessions Concentrators • Encryption processing is performed in software • VPN 3015 is field-upgradable to the Cisco VPN 3030 and 3060 models and for redundancy
VPN 3030 and 3060 • VPN 3030 is for medium- to large-sized organizations with bandwidth requirements from full T1/E1 through T3/E3 (50 Mbps max. performance) and up to 1500 simultaneous sessions; field-upgradeable to the Cisco VPN 3060 Concentrators • VPN 3060 is for large organizations, with high-performance, high-bandwidth requirements from fractional T3 through full T3/E3 or greater (100 Mbps max. performance) and up to 5000 simultaneous remote access sessions • Both have specialized SEP modules to perform hardware-based acceleration
VPN 3080 Concentrator
• Optimized to support large enterprise organizations that demand the highest level of performance combined with support for up to 10,000 simultaneous remote access sessions • Specialized SEP modules perform hardware-based acceleration
VPN 3000 Client
• Establishes secure, end-to-end encrypted tunnels to the Cisco VPN 3000 Concentrator
VPN 3002 Hardware Client
• Emulates the software client in hardware • Ideal for mixed operating system environments and where corporation does not own/control remote PC or for very large applications requiring large number of devices due to ease of deployment, upgradability & scalability
Key Features • Cisco VPN 3000 Series Concentrators –
Support for industry standard IPSec DES/3DES and Cisco IPSec/NAT for VPN Access through Port Address Translation firewalls
–
Unlimited-use license for Cisco VPN Client distribution included at no cost
–
Supports standard authentication: RADIUS, SDI Tokens, and Digital Certificates
–
VPN load balancing allows for multiple units to cluster as a single shared pool
• Cisco VPN 3002 Hardware Client –
Works with most operating systems, including Windows, Linux, Solaris, MAC, etc. Cisco VPN 3000 Family
5-16
Chapter 5
VPN and Security Products
–
Auto-upgrade capability automates upgrades with no user intervention required
–
Client technology employs push policy and automatic address assignment from the central site concentrator, enabling virtually unlimited scalability
Competitive Products • Nortel: Contivity products
Specifications Cisco VPN 3000 Series Concentrators Feature
VPN 3005
VPN 3015
VPN 3030
VPN 3060
Simultaneous Users
100
100
1500
5000
10,000
Encryption Throughput
4 Mbps
4 Mbps
50 Mbps
100 Mbps
100 Mbps
Encryption Method
Software
Encryption (SEP) Module 0
VPN 3080
Software
Hardware
Hardware
Hardware
0
1
2
4
Redundant SEP
No
No
Optional
Optional
Yes
Expansion Slots
0
4
3
2
N/A
Upgradeable
No
Yes
Yes
N/A
N/A
Memory
32 MB (fixed)
128 MB
128 MB
256 MB
256 MB
T1 WAN Module
Fixed option
Optional
Optional
Optional
Optional
Hardware Configuration
1U, Fixed
2U, Scalable
2U, Scalable
2U, Scalable
2U
Power Supply
Single
Single, with a dual option
Single, with a dual option
Single, with a dual option
Dual
Client License
Unlimited
Unlimited
Dimensions (HxWXD)
1.75 x 17.5 x 11.5 in. 3.5 x 17.5 x 14.5 in.
Unlimited
Unlimited
Unlimited
3.5 x 17.5 x 14.5 in.
3.5 x 17.5 x 14.5 in.
3.5 x 17.5 x 14.5 in.
Cisco VPN 3002 Hardware Client VPN 3002 Hardware Client
Hardware Processor
Motorola PowerPC processor; Dual flash image architecture
Network Interfaces
CPVN3002-K9: One Public 10/100Mbps RJ-45 Ethernet Interface and One Private Port 10/100Mbps RJ-45 Ethernet Interface CVPN3002-8E-K9: One Public 10/100Mbps RJ-45 Ethernet Interface and Eight Private Port 10/100Mbps RJ-45 Ethernet Interfaces via AUTO-MDIX switch
Physical Dimensions
1.967 x 8.6 x 6.5 in. (5 x 8.6 x 16.51 cm)
Power Supply
External AC Operation: 100-240V at 50/60 Hz with universal power factor correction; 4 foot cord included and international “pigtail” power cord selection
Tunneling Protocol Support
IPsec with IKE key management
Monitoring & Configuration
Event logging; SNMP MIB-II support Embedded management interface is accessible via console port or local web browser; SSH/SSL
56-bit DES (IPsec); 168-bit Triple DES (IPsec) Encryption Algorithms, Key Management & Authentication Algorithms
Authentication and Accounting Support for redundant external authentication servers including RADIUS Servers Microsoft NT Domain authentication, X.509v3 Digital Certs (PKC7-PKCS10) Configuration Modes
Client Mode—acts as client, receives random IP address from Concentrator Pool; Uses NAPT to hide stations 3002; Network behind 3002 is unroutable; few configuration parameters Network Extension Mode—acts as site-to-site device; Uses NAPT to hide stations only to Internet (stations visible to central site); Network behind 3002 is routable; additional configuration parameters
Cisco VPN 3000 Family
5-17
CHAPTER 5 VPN AND SECURITY PRODUCTS
Feature
Chapter 5
VPN and Security Products
Selected Part Numbers and Ordering Information1 Cisco VPN 3000 Series Products1 CVPN3000-MONAPP
PN 3005, 3015, 3030, 3060, 3080 Concentrators Monitor App
Cisco VPN 3000 Series Upgrades CVPN1530-UPG-RED CVPN1560-UPG-NR CVPN1560-UPG-RED CVPN1580-UPG-RED CVPN3030-UPG-RED CVPN3060-UPG-NR CVPN3080-UPG-R/R CVPN3080-UPG-RED CVPN3060-UPG-RED CVPN6060-UPG-RED CVPN6080-UPG-RED CVPN3060-UPG-R/R CVPN6080-UPG-R/R
Cisco VPN 3015 To 3030 (Redundant) Upgrade Kit Cisco VPN 3015 To 3060 (Non-Redundant) Upgrade Kit Cisco VPN 3015 To 3060 (Redundant) Upgrade Kit Cisco VPN 3015 To 3080 (Redundant) Upgrade Kit Cisco VPN 3030 To 3080 (Redundant) Upgrade Kit Cisco VPN 3030 To 3060 (Non-Redundant) Upgrade Kit Cisco VPN 3030 (Redundant) to 3080 (Redundant) Upgrade Kit Cisco VPN 3030 To 3080 (Redundant) Upgrade Kit Cisco VPN 3030 To 3060 (Redundant) Upgrade Kit Cisco VPN 3060 To 3060 (Redundant) Upgrade Kit Cisco VPN 3060 To 3080 (Redundant) Upgrade Kit Cisco VPN 3030 (Redundant) to 3060 (Redundant) Upgrade Kit Cisco VPN 3060 (Redundant) to 3080 (Redundant) Upgrade Kit
Cisco VPN 3000 Series Accessories CVPN3000-PWR=
Cisco VPN 3000 Concentrator Power Supply
Cisco VPN 3000 Concentrator CVPN3005-E/FE-BUN CVPN3015-NR-BUN CVPN3030-NR-BUN CVPN3030-RED-BUN CVPN3060-NR-BUN CVPN3060-RED-BUN CVPN3080-RED-BUN
CVPN3005-E/FE hw set, sw, client, & US power cord CVPN3015-NR non-redundant hw set, sw, client, & US power cord CVPN3030-NR non-redundant hw set, sw, client, & US power cord CVPN3030-RED redundant hw set, sw, client, & US power cord CVPN3060-NR non-redundant hw set, sw, client, & US power cord CVPN3060-RED redundant hw set, sw, client, & US power cord CVPN3080-RED redundant hw set, sw, client, & US power cord
Cisco VPN 3000 Series Basic Maintenance CON-SNT-PKG4 CON-SNT-PKG8 CON-SNT-PKG11 CON-SNT-PKG13 CON-SNT-PKG14
SMARTnet Maintenance for Cisco CVPN3005-E/FE-BUN SMARTnet Maintenance for Cisco CVPN3015-NR-BUN SMARTnet Maintenance for Cisco CVPN3030-NR-BUN SMARTnet Maintenance for Cisco CVPN3030-RED-BUN SMARTnet Maintenance for Cisco CVPN3060-RED-BUN
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco VPN 3000 series Web site: http://www.cisco.com/go/vpn3000
Cisco VPN 3000 Family
5-18
Chapter 5
VPN and Security Products
Cisco VPN 5000 Series Concentrators Cisco VPN 5000 Series Concentrators enable Service Providers to easily deploy managed VPN services. The Cisco VPN 5000 concentrators are purpose-built VPN concentrator platforms and associated VPN client software that incorporate the most advanced high-performance encryption and authentication techniques available. The Cisco VPN 5000 concentrators series is the most feature-rich carrier-class VPN product line on the market, with support for the most demanding multiplatform, multiprotocol environments.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco VPN 5001
• • • • • • • •
Up to 1,500 simultaneous site-to-site or client-to-site IPSec (DES or 3DES) tunnels Up to 40 Mbps 3DES throughput VPN Clients for Windows 95/98/NT/2000, Mac OS, Linux, or Solaris platforms CLI or GUI management interfaces RADIUS PAP/CHAP, RSA SecurID, Axent Defender or X.509 Digital Certificates for authentication VPNs that support IP, IPX or Appletalk across site-to-site tunnels VPNs that support IP or IPX across client-to-site tunnels VPNs that can take advantage of routing updates (RIP, RIP2, or OSPF) across site-to-site tunnels
Cisco VPN 5002
• • • • • •
Up to 10,000 simultaneous site-to-site or client-to-site IPSec (DES or 3DES) tunnels Up to 256 different Customer Contexts (Virtual Routers, VPNs, RADIUS) Up to 190 Mbps 3DES throughput VPN Clients for Windows 95/98/NT/2000, Mac OS, Linux, or Solaris platforms RADIUS PAP/CHAP, RSA SecurID, Axent Defender or X.509 Digital Certificates for authentication VPNs that need tunnel mapping between IPSec and/or L2TP LNS into 802.1Q VLANs, Frame Relay PVCs, GRE tunnels, or other IPSec tunnels
Cisco VPN 5008
• • • • • •
Up to 40,000 simultaneous site-to-site or client-to-site IPSec (DES or 3DES) tunnels Up to 256 different Customer Contexts (Virtual Routers, VPNs, RADIUS) Up to 760 Mbps 3DES throughput VPN Clients for Windows 95/98/NT/2000, Mac OS, Linux, or Solaris platforms RADIUS PAP/CHAP, RSA SecurID, Axent Defender or X.509 Digital Certificates for authentication VPNs that need tunnel mapping between IPSec and/or L2TP LNS into 802.1Q VLANs, Frame Relay PVCs, GRE tunnels, or other IPSec tunnels
CHAPTER 5 VPN AND SECURITY PRODUCTS
Competitive Products • CoSine: IPSX 9000 • Lucent (SpringTide): IPSS 5000
• Nokia: CC 5010 • Nortel Shasta: BSN 5000
Specifications Feature
VPN 5001
VPN 5002
VPN 5008
Simultaneous VPNs
1,500
10,000
40,000
Encryption Throughput
40 Mbps
190 Mbps
760 Mbps
Encryption Method
Hardware
Hardware
Hardware
Encryption Engines
2
4
16
Key Generation Engines
1
2
8
Chassis ESP Card Slots
N/A (Fixed Config)
2
8
Memory (per ESP Card)
64 MB
256 MB
256 MB
Cisco VPN 5000 Series Concentrators
5-19
Chapter 5
VPN and Security Products
Feature
VPN 5001
VPN 5002
VPN 5008
ESP Card I/O Options
2 x 10/100 FE
10/100 FE DS3 HSSI
10/100 FE DS3 HSSI
Power Supplies
1
1
Dual Hot-Swap
Client License
Free Unlimited
Free Unlimited
Free Unlimited
Dimensions (HxWXD)
1.8 x 12.1 x 15 in.
6.25 x 17.5 x 16.25 in.
22.3 x 17.1 x 16.0 in.
Selected Part Numbers and Ordering Information1 Cisco VPN 5000 Series Products1 CVPN5001-AC CVPN5002-AC CVPN5002-DC CVPN5008-AC CVPN5008-DC ESP-DS3-3DES ESP-HSSI-3DES ESP-FE-3DES PWR-CVPN5008-AC= PWR-CVPN5008-DC= CVPN5001-SW CVPN5002-SW CVPN5008-SW CVPN5000-SW= CVPN5000-FP PWR-CVPN5001-AC= ACS-CVPN5001-RM= ACS-CVPN5002-RM= ACS-CVPN5008-RM= ACS-CVPN5008-FILTER=
Cisco VPN 5001 Concentrator, 2 10/100, Universal AC Power Cisco VPN 5002 Concentrator 2 Slot Chassis, AC Power Cisco VPN 5002 Concentrator 2 Slot Chassis, DC Power Cisco VPN 5008 Concentrator 8 Slot Chassis, Dual AC Power Cisco VPN 5008 Concentrator 8 Slot Chassis, Dual DC Power CVPN5000 Edge Services Processor, DS3 and 3DES CVPN5000 Edge Services Processor, HSSI and 3DES CVPN5000 Edge Services Processor 10/100 and 3DES CVPN5008 single AC Power Supply, Spare CVPN5008 single DC Power Supply, Spare Cisco VPN 5001 System, Client, and Management Software Cisco VPN 5002 System, Client, and Management Software Cisco VPN 5008 System, Client, and Management Software Cisco VPN 5000 System, Client, and Management Software Spare CD CVPN5000 Face Plate CVPN5001 Universal AC PS, Spare Cisco VPN 5001 Concentrator Rack Mount, Spare Cisco VPN 5002 Concentrator Rack Mount, Spare Cisco VPN 5008 Concentrator Rack Mount, Spare Cisco VPN 5008 Filter, Spare
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability)
For More Information See the Cisco VPN 5000 series Web site: http://www.cisco.com/go/vpn5000
Cisco VPN 5000 Series Concentrators
5-20
CH A P T E R
6
Content Delivery Network Products Content Delivery Network Products at a Glance Product
Features
Page
Cisco Content Engine 500 Series
Content services platform for Enterprise and Service Provider networks • Functions as edge node device in a Content Delivery Network (CDN) system • Responsible for delivery of distributed content to the end-user • Offers caching, CDN services, and Employee Internet Management capabilities
6-3
Cisco Content Engine 7300 Content services platform for large Service Provider networks Series • Offers premium hosting services
6-5
• Caching capabilities reduce WAN bandwidth and optimize Web site performance • Provides on-demand content delivery and streaming media services 6-7 Cisco Content Distribution Content networking policy and management device Manager 4600 Series • Central control over delivery of high-bandwidth content, live and video on demand over any IP network • Easy-to-use management capabilities through a Web-based GUI • Preview and schedule replication of media to edge devices, thus managing bandwidth and content
Cisco Content Router 4400
Integrated global load balancing solution • Solves distributed server site selection problems • Uses DNS to redirect a client to the best site on the Internet based on network delay • Transparent redirection to the end user and works with any IP application • Extremely fast site-selection algorithm is optimized for high performance Web-style transactions
High-performance, intelligent platform for Web site and e-commerce optimization Cisco CSS 11000 Series Content Services Switches • Makes switching decisions based on the content requested, using URLs and cookies
6-9
6-11
• Allows Service Providers and Web hosters to deliver new managed services • Delivers advanced Web site security, including DoS protection and firewall load balancing
Cisco LocalDirector
Integrated hardware and software solution for load balancing across servers • Allows many servers to appear as one server for high availability and easy scalability • Secure real-time embedded operating system • Scalable to meet needs of largest Web sites
Cisco DistributedDirector
Global Internet service scaling solution 6-15 • Enables set of distributed servers to be seen as a single virtual server • Configurable as authoritative Domain Name Services (DNS) caching name server and/or HTTP Session Redirector on a per-domain basis
2-29 CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
Content Distribution Module Line card for the Catalyst 6000 (CDM) for the Catalyst 6000 • Balances client traffic across multiple servers within server farms Series Switches • URL and Cookie-based load balancing
6-13
• High-performance—200,000 new Layer 4 TCP connection setups per second
Content Delivery Network Products at a Glance
6-1
Chapter 6
Content Delivery Network Products
Content Delivery Networking Overview Cisco Content Delivery Networking solutions optimize any size network to dynamically enable faster responses to Web requests and decrease network bandwidth congestion. It provides flash crowd protection, insures high levels of content availability and security, and leverages investment in Cisco IP infrastructure. Content Delivery Networks (CDNs) allow enterprises to deploy the next generation of scaleable, accelerated, web-based, content-rich E-business solutions including TV-quality streaming media and knowledge sharing. For Service Providers, CDN solutions represent a highly profitable, new revenue opportunity by enhancing the customer/user Web experience and significantly accelerating the delivery of rich Web content and streaming media.
Sample CDN Solution Overview—Integrated Enterprise E-Learning
Content Delivery Networking Overview
6-2
Chapter 6
Content Delivery Network Products
Cisco Content Engine 500 Series Cisco Content Engines (CE) are the edge node devices in the Content Delivery Network (CDN) system that are responsible for the delivery of distributed content to the end-user. As content services platforms, Cisco Content Engines offer a number of content services that solve critical problems faced by service providers and enterprises including caching, CDN service, and Employee Internet Management. Cisco Content Engine 500 Series is designed for service providers and enterprises who are seeking to deliver scalable, high quality content on-demand in an intranet/extranet environment or to provide reliable caching to regional offices or branch sites to improve WAN bandwidth usage and Internet access times.
When to Sell Sell This Product
When a Customer Needs These Features
Content Engine 590
• Accelerates content delivery in service provider PoPs and large enterprises
Content Engine 560
• Increases WAN bandwidth performance at enterprise regional offices or provides on-demand content delivery with Cisco Content Distribution Manager
Content Engine 507
• Increases WAN bandwidth performance at enterprise branch sites or provides on-demand content delivery with Cisco Content Distribution Manager
Key Features • Caching: –
Accelerated content delivery
–
WAN bandwidth cost savings
–
Protection vs. uncontrollable bottlenecks
• CDN CEs for Intranet/Extranet—Use in conjunction with Cisco Content Distribution Manager to enable rich media e-learning and corporate communications. • CDN CEs for Service Providers—Use in conjunction with Cisco Content Distribution Managers and Content Routers to offer new premium hosting services such as on-demand content delivery and streaming media; also use to scale Web sites.
Competitive Products • CacheFlow: CacheFlow Client Accelerator (Server Accelerator for SP) • Inktomi: Traffic Server™
• Network Appliance: NetCache™ Appliance
Feature
Cisco Content Engine 590
Supported Interfaces Two 10/100BASE-TX
Cisco Content Engine 560
Cisco Content Engine 507
Cisco Content Engine 507AV
Two 10/100BASE-TX
Two 10/100BASE-TX
Two 10/100BASE-TX
20 Mbps
T1/E1
T1/E1
HTTP Performance
45+ Mbps
SDRAM
1GB
512 MB
256 MB
256 MB
Max Storage
252 GB
144 GB
36 GB
18 GB
Cisco Content Engine 500 Series
6-3
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
Specifications
Chapter 6
Content Delivery Network Products
Cisco Content Engine 590
Cisco Content Engine 560
Cisco Content Engine 507
Cisco Content Engine 507AV
Internal Storage (Ultra2 SCSI)
Two 18 GB drives
Two 18 GB drives
One or two 18 GB drives
One 18 GB drives
Flash memory
16 GB
16 GB
16 GB
16 GB
Yes
No
No
1
1
1
Dimensions (HxWXD) 1.75 x 17.5 x 14.1 in.
1.75 x 17.5 x 14.1 in.
1.75 x 17.5 x 14.1 in.
1.75 x 17.5 x 14.1 in.
Weight
12.5 lb.
12.5 lb.
12.5 lb.
12.5 lb.
Power
AC/DC
AC
AC
AC
Feature
Storage Array Support Yes 1
Rack Units
Option
Storage Array 6 (AC/DC)
Disks (Ultra2 SCSI)
6
Power Supplies
One or two (n+1) AC/DC power supplies
Cooling Fans
Three (n+1) cooling fans
SCSI LVD Interfaces
Two SCSI LVD interfaces
JBOD
Yes
Dimensions (HxWXD)
5.25 x 17.55 x 17 in.
Selected Part Numbers and Ordering Information1 Cisco Content Engine 500 Series Hardware1 CE-590 CE-590-CDN CE-560 CE-507 CE-507-CDN CE-507AV-CDN
Cisco Content Engine 590 AC Power, Cache software Cisco Content Engine 590 AC Power, CDN software Cisco Content Engine 560 AC Power, Cache software Cisco Content Engine 507 AC Power, Cache software Cisco Content Engine 507 AC Power, CDN software Cisco Content Engine 507 with analog video card, CDN software
Cisco Content Engine 500 Series Options CE-DISK-18GB-507-X SA6-SHF-6DISK-AC SA6-OPT-AC
(1) Extra 18 GB Ultra2 SCSI disk drive for Content Engine 507 Storage Array 6, AC Storage Array 6, AC option (only when purchased with a CE)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Content Engine Web site: http://www.cisco.com/go/ce500
Cisco Content Engine 500 Series
6-4
Chapter 6
Content Delivery Network Products
Cisco Content Engine 7300 Series Cisco Content Engines (CE) are the edge node devices in the Content Delivery Network (CDN) system that are responsible for the delivery of distributed content to the end-user. As content services platforms, Cisco CEs offer a number of content services that solve critical problems faced by Service Providers and Enterprises including caching, CDN service, and employee internet management.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Content Engine 7320
Large Service Providers planning to deliver: • Caching services to reduce WAN bandwidth costs and increase performance of Web sites and/or • New premium content delivery services such as on-demand content delivery and streaming media
Key Features • Caching –
Accelerated content delivery
–
WAN bandwidth savings
–
Protection vs. uncontrollable bottlenecks
• CDN –
Use in conjunction with Cisco Content Distribution Managers and Content Routers to offer new premium hosting services such as on-demand content delivery and streaming media
–
Scale Web sites
Competitive Products • CacheFlow: CacheFlow Server Accelerator • Inktomi: Traffic Server
• Network Appliance: NetCache Appliance
Specifications Cisco Content Engine 7320
Supported Interfaces
Two 1000BASE-SX and four 10/100BASE-TX
HTTP Performance
155+ Mbps
SDRAM
2 GB
Max Storage
396 GB
Internal Storage (Ultra2 SCSI)
Ten 18 GB drives
Flash memory
128 MB
Storage Array Support
Yes
Rack Units
7
Dimensions (HxWXD)
12.25 x 17.5 x 28 in.
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
Feature
Cisco Content Engine 7300 Series
6-5
Chapter 6
Feature
Cisco Content Engine 7320
Weight
115 lb.
Power
3 (n+1) AC
Content Delivery Network Products
Options Storage Array
Storage Array 12
Disks (Ultra2 SCSI)
12
Power Supplies
Two (n+1) AC power supplies
Cooling Fans
Three (n+1) cooling fans
SCSI LVD Interfaces
Two SCSI LVD interfaces
JBOD
Yes
Dimensions (HxWXD)
5.25 x 17.55 x 17 in.
Selected Part Numbers and Ordering Information1 Cisco Content Engine 7300 Series Hardware1 CE-7320 CE-7320-CDN
Content Engine 7320 AC Power, Cache software Content Engine 7320 AC Power, CDN software
Cisco Content Engine 7300 Series Options SA12-SHF-12DISK-AC SA12-OPT-AC
Storage Array 12, AC power Storage Array 12, AC option (only when purchased with a CE)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Content Engine Web site: http://www.cisco.com/go/ce7300
Cisco Content Engine 7300 Series
6-6
Chapter 6
Content Delivery Network Products
Cisco Content Distribution Manager 4600 Series The Cisco Content Distribution Manager (CDM) configures network and device policy settings for edge node Content Engines (CE). Used to accelerate web content and save network bandwidth in a content networking architecture, the CDM can be easily integrated into existing network infrastructures. Deployed in an Enterprise or Service Provider Internet or extranet environment, the Cisco CDM and CEs provide transparent on-demand rich media streaming & static file delivery to standard PCs. Cisco CDNs allow service providers and enterprises to distribute rich media content closer to their target customers overcoming issues such as network bandwidth availability, distance or latency obstacles, origin server scalability, and congestion issues during peak usage periods. The CDN solution enables content delivery services for web hosting, streaming, e-commerce, e-learning, corporate communications, and mission critical e-business applications.
When to Sell Sell This Product
When a Customer Needs These Features
CDM 4630
• Low-cost early deployment, or small enterprise network trials, proof of concept, and pilot programs
CDM 4650
• Medium and large enterprise networks, supports up to 1000 Cisco Content Engines
CDM 4670
• Service provider deployment, supports thousands of Cisco Content Engines
Key Features • Complete CDN solution with Cisco Content Router and Cisco Content Engines • Central control over delivery of high-bandwidth content, live and video-on-demand over any IP network • Easy-to-use management capabilities through a Web-based GUI; services include previewing and scheduling replication of media to edge devices, bandwidth and content management • Automatically generates thumbnail reference images and sample Web pages for integration with corporate extranet, intranet, and Internet sites • One URL per media file provides seamless integration into any Web site • Integrates with standards for Web multimedia presentation, including HTML/DHTML, eXtensible Markup Language (XML) and SMIL CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
• Secure and fault-tolerant file transfer using Secure Socket Layer (SSL) encryption for secure media transfers • Channel configuration for media distribution to any number of discrete audiences using “distribution lists” • Host content for a variety of customers within a single CDN • Ability to create multiple virtual CDNs addressing targeted media distribution • Content registration in cache logs for billing capabilities Cisco Content Distribution Manager 4600 Series
6-7
Chapter 6
Content Delivery Network Products
Competitive Products • Cacheflow: Client and Server Accelerators • Inktomi: Traffic Server
• Network Appliance: ContentDirector
Specifications Feature Sampling of Rich Media File Formats
Content Distribution Manager 4630
Content Distribution Manager 4650
Content Distribution Manager 4670
MPEG RealVideo Windows Media QuickTime HTML, GIF, JPEG Adobe Acrobat Macromedia Shockwave CAD/CAM MRI
Same as CDM 4630
N/A - file formats handled by the CEs
Supported Interfaces Autosensing 10/100BASE-T
Autosensing 10/100BASE-T
Autosensing 10/100BASE-T
Recommended Network Size
Less than 100 CEs
Less than 1000 CEs
Less than 10,000 CEs
Processor Speed
600-MHz PIII
2x866 Xeon
2x866 Xeon
RAM
512 MB
1 GB
1 GB
Internal Storage
One 30 GB, 10K RPM, Ultra2 SCSI disk 140 GB RAID 5 drive
Rack Units
1
Dimensions (HxWXD) 1.72 x 17.5 x 14.1 in.
36 GB1
7
7
12.25 x 17.5 x 28 in.
12.25 x 17.5 x 28 in.
1. Minimum storage required for DM service provider configurations
Selected Part Number and Ordering Information1 Cisco Content Distribution Manager 4600 Series Hardware1 CDM-4630 CDM-4650 CDM-4670
Cisco Content Distribution Manager 4630 Cisco Content Distribution Manager 4650 Cisco Content Distribution Manager 4670
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Content Distribution and Management Web site: http://www.cisco.com/go/cdm
Cisco Content Distribution Manager 4600 Series
6-8
Chapter 6
Content Delivery Network Products
Cisco Content Router 4400 Series The Cisco Content Router (CR) is a global load balancer designed to load balance up to 20 Internet sites in a Content Networking architecture so that it quickly and accurately routes a user’s connection to the best site based on network delay, site and content availability, & derived bandwidth. The typical deployment of the Content Router includes at least one CR4400, or a redundant pair, near the origin data center and a hardware device that includes the Content Routing Agent (CRA) at each of the mirrored sites. The agent can reside on a dedicated platform such as a Cisco 2600 router, on a content switch such as Cisco Local Director, or on a content-delivery node such as the Content Engine 500 series. The CR is defined as the authoritative DNS server for the DNS name of a set of servers at multiple sites on the Internet. A user's application makes a DNS query for the IP address of one of the servers that is now routed by the content router, which starts the routing process. The client's DNS server sends a request to the content router, which tunnels the request to the CRA at each of the remote sites. The original DNS query is included in the time-delayed DNS request, each of the agents sends a DNS response packet with the IP address of a local content switch, load balancer, or server at the site. The first packet through the network wins the race and the client connects to the winning site. The CR/CRA can even ‘bloat’ packets to artificially enlarge the packet size so it more accurately derives network bandwidth. Another insertion mechanism that works very well in large scale enterprises and access service providers is Edge-Intercept Insertion. This mechanism utilizes WCCPv2 to redirect the client-to-DNS requests to the CR. The CR can then establish a DNS response race directly back to the client, which makes accurate, DNS-based redirections with ‘to-the-user’ accuracy.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Content Router 4400 • To solve Web site scalability issues and mirrored site problems by routing users to the best site for content • Supports other applications including audio and video streaming applications • Distributed data center environments • Access provider environments leveraging WCCP and Edge-Intercept Insertion mechanisms
Cisco Content Router 4450 • Targeted to large service providers offering Content Delivery Services • Site selection based on network delay and content location • Requires Oracle database
Key Features • Transparent redirection to the end user and works with any IP application • Easy configuration through a Cisco IOS-style command-line interface • Redundant configurations, multiple CRs can be deployed at the origin site to provide fail-over and load scaling • Can be deployed within an internal enterprise network using Web Cache Control Protocol Version 2 (WCCPv2) to redirect DNS requests to a Boomerang server located near the internal DNS server Cisco Content Router 4400 Series
6-9
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
• Uses DNS to redirect a client to the best Internet site based on network delay
Chapter 6
Content Delivery Network Products
Key Notes The CR4400 uses an exclusive third-generation Content Routing technology unique for its scalable, race-based system. Unlike other solutions, it will not send customers to an arbitrarily selected location with no thought to proximity. Note that many products on the market rely on first generation Round-Trip Response Time (RTT) measurements and RTT caching systems that severely delay site selection to cause poor user experience.
Specifications Feature
Cisco Content Router CR4400
Supported Interfaces
Two autosensing 10/100BASE-TX ports
SDRAM
256 MB
Flash Memory
8 MB
Internal Storage
9-GB, 7200-RPM, Ultra II SCSI LVD disk drive
Rack Units
1
Dimensions (HxWXD)
1.72 x 17.50 x 14.13 in.
Weight
12.5 lbs.
Power
AC
Selected Part Number and Ordering Information1 Cisco Content Router 4400 Series1 CR-4400 CR-4450
Cisco Content Router 4400 Cisco Content Router 4450
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco Content Router Web site: http://www.cisco.com/go/cr
Cisco Content Router 4400 Series
6-10
Chapter 6
Content Delivery Network Products
Cisco CSS 11000 Series Content Services Switches The Cisco CSS 11000 series content services switches optimize Web response time and content availability for high-end Web and e-commerce sites. Designed to front-end Web server farms or cache clusters, CSS 11000 series switches determine the best Web server or cache to handle the content request at that moment—based on the content being requested, availability and location of content, and network and server load—all at wire speed. Cisco offers three 11000 series platforms—the carrier-class, chassis-based CSS 11800; the standalone CSS 11150 for small-to-medium Web sites; and the compact CSS 11050 for small Web sites and PoPs. Featuring Cisco Web Network Services (Web NS) software, the Cisco CSS 11000 series enables Web and Application Service Providers (ASPs), Web content providers, and enterprises engaged in e-business to build global Web networks optimized for e-commerce transactions and Web content delivery. With its patented content switching technology, the Cisco CSS 11000 series gives businesses maximum control in ensuring availability of their Web sites, securing Web site resources without compromising performance, and allocating Web site resources efficiently.
When to Sell Sell This Product
When a Customer Needs These Features
Content Services Switch • High-density, high-performance content switching for large server farms or cache clusters 11800 • Platform for delivering new, value-added managed services • Global load balancing for large distributed Web sites
Content Services Switch • Compact content switching platform for up to 16 web servers or caches 11150 • Cost-effective firewall load balancing • Cache redirection for transparent or reverse proxy caching
Content Services Switch • Compact content switching platform for up to 8 Web servers or caches 11050 • Cost-effective solution for Points of Presence (PoPs)
Key Features • High-speed web content delivery via best site and server selection based on full URL, cookie, and resource availability information
• Up to 400 percent improvement in Web cache efficiency for transparent, proxy, and reverse proxy caching configurations • Supports all TCP- and UDP-based Web protocols, wire-speed Network Address Translation (NAT), and integrated IP routing • Optimizes both content requests and delivery for HTTP, passive FTP, and streaming media protocols Cisco CSS 11000 Series Content Services Switches
6-11
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
• Site-level security with wire-speed denial-of-service (DoS) prevention; firewall load-balancing provides scalable security for backend databases and applications
Chapter 6
Content Delivery Network Products
• Enables advanced service-level agreements (SLAs) and a variety of new fee-based services • Offers active-active and active-passive redundancy configurations
Competitive Products • Alteon/Nortel: ACEdirector and 700 Series • F5 Networks: Big/IP and LAN switch Partners • Foundry Networks: ServerIron
• Radware: Web Server Director (WSD) • Resonate: Central Dispatch and Global Dispatch
Specifications Feature
CSS 11800
CSS 11150
Fixed Ports
None
12 10/100BASE-TX ports 8 10/100BASE-TX ports 16 10/100BASE-TX ports 8 10/100BASE-TX and 1 12 10/100BASE-TX and 4 100BASE-FX 1000BASE-SX port ports 12 10/100BASE-TX and 2 1000BASE-SX ports
Modular Slots
Eight slots for I/O modules
None
None
Available Modules
8 RJ-45 100BASE-TX ports 6 RJ-45 10/100BASE-TX and 2 SC duplex 100BASE-FX ports 6 RJ-45 10/100BASE-TX and 2 SC duplex 100BASE-FX ports 6 RJ-45 10/100BASE-TX and 2 SC duplex 100BASE-FX ports
None
None
Available System Modules
Redundant System Control Module None (SCM) Switch fabric module
None
Backplane
20.0 Gbps (base) 20.0 Gbps 1:1 redundant (optional)
5.0 Gbps
5.0 Gbps
2.62 x 17.0 x 15.0 in.
2.62 x 17.0 x 15.0 in.
Dimensions (HxWxD) 25.25 x 17.0 x 12.5 in.
CSS 11050
Selected Part Numbers and Ordering Information1 Cisco Content ServicesSwitch 118001 CSS-11801-AC CSS8-IOM-8FE CSS8-IOM-6/2FE CSS8-IOM-4GE/8 CSS8-IOM-4GE/16 CSS8-SCM CSS8-SFM2 CSS8-GBIC-SX CSS8-IDM-MEM-FD
CSS 11801, (1) SFM2, (1) SCM, (1) IDM-HD, (1) AC 8 RJ-45 100BASE-TX ports 6 RJ-45 10/100BASE-TX ports and 2 SC duplex 100BASE-FX ports Up to 4 full duplex 1000BASE-SX ports with 8 MB flow cache Up to 4 full duplex 1000BASE-SX ports with 16 MB flow cache Redundant System Control Module (SCM) Switch fabric module 1000BASE-SX gigabit interface converter Integrated Disk Module with Flash Disk
Cisco Content Services Switch 11150 CSS-11151-AC CSS-11152-AC CSS-11153-AC CSS-11154-AC
12 10/100BASE-TX ports 16 10/100BASE-TX ports 12 10/100BASE-TX ports and 4 100BASE-FX ports 12 10/100BASE-TX ports and 2 1000BASE-SX ports
Cisco Content Services Switch 11150 CSS-11051-AC CSS-11052-AC
8 10/100BASE-TX ports 8 10/100BASE-TX ports and 1 1000BASE-SX port
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the CSS 11000 series Web site: http://www.cisco.com/go/11000 Cisco CSS 11000 Series Content Services Switches
6-12
Chapter 6
Content Delivery Network Products
Cisco LocalDirector The Cisco LocalDirector series offers a high-availability, integrated hardware and software solution that intelligently balances the load of user traffic across multiple TCP/IP application servers. Cisco LocalDirector tracks network sessions and server load conditions in real time, directing each session to the most appropriate server. All physical servers appear as one virtual server, requiring only a single IP address and a single URL for an entire server farm. Cisco LocalDirector accelerates content delivery by routing client requests to the best Web server and the Web site of origin. LocalDirector supports critical content-routing protocols such as Dynamic Feedback Protocol (DFP) and the Boomerang Control Protocol (BCP), which ensure seamless content delivery network integration and reduced deployment costs. Layer 5-7 content load balancing guarantees the correct client is routed to an optimized content location. By distributing user requests across a cluster of servers, Cisco LocalDirector optimizes responsiveness and system capacity, ensures scalability, and dramatically reduces the cost of providing large-scale Internet, database, and application services.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco LocalDirector
• Load balancing across multiple TCP/IP application servers • High availability Internet services such as e-commerce, Web content, and e-mail • High availability Intranet services for employees, customers, and suppliers
Key Features • Content load balancing and redirection allow Layer 5-7 content load balancing, which guarantees the correct client is routed to an optimized content location • Simple setup in ten commands for typical configurations, with little disruption to existing network configuration and no changes to network addresses; includes intuitive configuration with Web-based GUI • High performance hardware supports up to 16 Fast EtherChannel 10/100 interfaces (LD 430 model) and reduces hardware costs by allowing up to 15 direct server connections
• Transparent addition and removal of servers with no disruption to user service, making it easy to scale up or down • Hot standby and stateful fail-over mechanisms ensure high availability by eliminating all points of failure for the data center • SSL, Cookie Sticky, and Redirect Sticky ensure completion of complex transactions in proxy server environments and shopping cart situations Cisco LocalDirector
6-13
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
• Hot standby configuration replication reduces administrative start up costs by automatically transferring a primary Cisco LocalDirector configuration to a secondary Cisco LocalDirector
Chapter 6
Content Delivery Network Products
Competitive Products • F5 Labs: Big IP • Foundry Networks: ServerIron Switch • Nortel Networks/Alteon: Ace Director
• Radware: Web Server Director • Resonate, Inc.: Central Dispatch
Specifications Feature
LocalDirector 416
Supported Interfaces
3-port 10/100 Ethernet
LocalDirector 430 Up to 16 10/100 Ethernet or 4 Gigabit Ethernet
RAM
32 MB
384 MB
Throughput
90 MB
400 MB with Fast Ethernet
Dimensions (HxWXD)
5.21 x 16.82 x 17.5 in
5.21 x 16.82 x 17.5 in
Selected Part Numbers and Ordering Information1 Cisco LocalDirector1 LDIR-416 LDIR-430 LD-QUADFE= LD-FO= LD-FDDI= LD-GE=
Standard LocalDirector High Performance LocalDirector 4-Port High-Speed Ethernet Card Spare Local Director Fail Over Cable FDDI Card for LocalDirector Gigabit Ethernet Card for LocalDirector
Cisco LocalDirector Basic Maintenance CON-SNT-PKG10 CON-SNT-PKG15
SMARTnet Maintenance for LocalDirector 416 SMARTnet Maintenance for LocalDirector 430
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the LocalDirector Web site: http://www.cisco.com/go/ld
Cisco LocalDirector
6-14
Chapter 6
Content Delivery Network Products
Cisco DistributedDirector DistributedDirector provides dynamic, transparent, and scalable Internet traffic load distribution between multiple geographically-dispersed servers. DistributedDirector is a global Internet service-scaling solution that utilizes Cisco IOS software and leverages routing table information to make “network intelligent” load distribution decisions. DistributedDirector transparently redirects end-user service requests to the closest responsive server, which increases access performance and reduces transmission costs. Users need only a single subdomain name or URL-embedded hostname for accessing a distributed set of servers, thus providing the appearance of a single virtual server.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Distributed Director
• Load distribution across geographically/topologically dispersed TCP/IP servers • High availability for dispersed mission-critical applications • Data center redundancy and failover
Key Features • Transparent distribution of all IP Services (TCP and UDP), including HTTP, FTP, Telnet, and Gopher; provides global scalability for all IP-based network services • Improves access performance by redirecting to the topologically closest server • Calculates client-to-server round-trip times in real time; redirects clients to server with lowest client-to-server link latency, maximizing end-to-end performance • Redirects clients only to responsive servers, resulting in maximized availability • Cisco IOS Software & standard command line interface for device configuration • Transparently add and remove distributed servers, simplifying maintenance • Supports multiple domains; cost-effective IP service scalability solution
Competitive Products • Alteon Networks: ACEdirector and Web Switches with WebOS GLSB • Resonate, Inc.: Global Dispatch • F5 Labs: 3DNS • RND Networks, Inc.: Web Server Director - Network Proximity (WSD-NP) • Foundry Networks: ServerIron Switch with Internet IronWare
• DistributedDirector is available in Cisco IOS software for 2600, 3600, and 7600 series routers, starting on release 12.2(4)T Enterprise Plus feature sets • Although IOS enables DistributedDirector and routing functions to run concurrently, dedicated routers are recommended for DistributedDirector
Cisco DistributedDirector
6-15
CHAPTER 6 CONTENT DELIVERY NETWORK PRODUCTS
Key Notes
Chapter 6
Content Delivery Network Products
• Note: If no dedicated hardware platform is available for running DistributedDirector, it is highly recommended that customers use the Configurable DD Cache feature (available in 12.2(7)T) to limit the amount of memory DistributedDirector may consume for DNS caching • To take advantage of enhanced caching capabilities, routers should be configured with additional DRAM (128MB or more)
For More Information See the DistributedDirector web site at http://www.cisco.com/go/dd
Cisco DistributedDirector
6-16
cpqrg_ch1_access_low_res.fm Page 1 Friday, August 17, 2001 11:12 AM
7
Access Products Access Products at a Glance Remote Dial Access—Data and Voice (VoIP) Product1
Features
Page
Hybrid async and ISDN dial access server Cisco AS5300 Series Universal Access Server • 4 to 8 T1/E1 ports for up to 192/240 modem or ISDN data calls; 4 serial backhaul ports
7-5
• One 10/100 Fast Ethernet & one 10BaseT Ethernet
Cisco AS5300/Voice Gateway
High performance dial access 4T1/E1 VoIP Gateway • Toll quality voice makes it ideal for service provider applications • Four T1/E1 ports for 96/120 voice & fax calls, and 4 serial backhaul ports • G.711, G.729, G.723.1 voice codecs and 14.4 kbps Group III fax relay
7-7
Cisco AS5350 Series Universal Gateway
High performance, 1RU, dial access gateway • Universal Port technology for data/voice/fax on any port, any time • 2,4, & 8 T1/E1/PRI configurations for 48 to 240 channels • Supports broad range of async/ISDN/VoIP/wireless protocols • Two 10/100 Ethernet ports, two 8 Mbps serial backhaul ports
7-9
Cisco AS5400 Universal Gateway
High performance, very high density, 2RU dial access gateway • Universal Port technology for data/voice/fax on any port, any time • 8 to 16 T1/E1/PRI or 1 T3 configuration for 192 to 648 channels • Supports broad range of async/ISDN/VoIP/wireless protocols • Flexible, redundant backhaul methods
7-12
Cisco AS5850 Universal Gateway
Very high port count chassis • Up to 4 T3s for 2,688 modem connections, or 86 E1s per system • Hybrid async and IDSN termination • Universal port-ready
7-14
Cisco AS5800 Series Access Server/Voice Gateway
Multi-slot, high port count chassis dial access server for async, ISDN, or voice calls • Up to two T3s for 2,016 modem connections, 1440 IDSN calls, or 1,344 voice calls • Voice support requires specialized voice/VoIP feature cards • Broad selection of backhaul interfaces (7200 based port adaptors)
7-15
Cisco AccessPath System—UGS4
Highest port count, pre-configured solution for universal gateway POPs • Up to 9408 channels in T1 configuration, up to 5760 channels in E1 configuration • Leverages Cisco AS5400 Universal Gateways, routers, and switches in a single fully-integrated 7-foot rack system
7-16
Remote Dial Access Network Management
Suite of network management products for configuration, troubleshooting, and maintenance of 7-17 Cisco dial access and VoIP solutions
SS7 Signaling Products
• Cisco SC2200 Signaling Controller—Connects VoIP and dial access solutions to the public switched telephone network via SS7/C7 • Cisco VSC3000 Virtual Switch Controllers—MGCP-based call agent (softswitch) for large-scale VoIP and VoATM applications
Cisco ATA 186 Telephone • Handset-to-Ethernet adaptor that interfaces analog phones with IP-based telephony networks Adapters
7-18
7-19
• Takes advantage of broadband pipes deployed through DSL, fixed wireless, cable modems, and other Ethernet connections
1. For Cisco 2509 and 2511 Access Servers, see page 1-18.
Access Products at a Glance
7-1
CHAPTER 7 ACCESS PRODUCTS
CH A P T E R
cpqrg_ch1_access_low_res.fm Page 2 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Remote Cable Access Product
Features
Page
Headend and Distribution Hub Equipment Cisco uBR7100 Series Universal Broadband Router
CMTS and integrated router for MxU, Tier 2 / Tier 3 cable operators, and ISPs • Choice of four DOCSIS and EuroDOCSIS qualified, fixed-configuration models • Integrated upconverter / modulator on the cable interface • Embedded dual 10/100 BaseT Ethernet network interface • Additional network interface with a wide variety of LAN and WAN options • Supports up to 1,000* data customers—*Actual number varies based on network/service loading and other configuration parameters
7-20
Cisco uBR7200 Series Universal Broadband Router
Modular DOCSIS qualified CMTS and integrated router for cable. Ideal for Tier 2, Tier 3, large 7-21 MSOs, and ISPs • Three models that share 10 different cable interfaces, over 50 network modules, and different processors that support a variety offor DOCSIS and EuroDOCSIS configurations • Support up to 5000, 7500, or 10,000 subscribers*: with uBr7223, uBR7246, uBR7246VXR—*Actual numbers vary based on network/service loading and other configuration parameters
Cisco uBR10012 Universal High-end DOCSIS-based CMTS and integrated router that delivers the services, performance, 7-23 scale, and carrier-class reliability large-scale, carrier class cable MSOs and service providers Broadband Router who need: • High-capacity aggregation platforms • Eight cable interface slots; each interface supports 2 downstreams and 8 upstreams with higher-density cards planned • Four network interface slots that support 1 Gbps over Gigabit Ethernet or 622 Mbps over OC-12 POS
Cable Customer Premise Equipment (CPE) Cisco uBR900 Series Cable Access Router
Integrated DOCSIS-based cable modem and router with hardware accelerated IPSec VPN 7-25 tunneling support that includes: • Cisco uBR925 with 4 Ethernet, 1 USB and 2 FXS ports that support telecommuter and small office DOCSIS-based data, VoIP and VPN services • DOCSIS-certified Cisco uBR905 with 4 Ethernet and 1 USB port that support DOCSIS-based data and VPN services
Cisco CVA124 Cable Voice CPE product for SOHO locations that support VoIP and data (excludes firewall, IPSec, VPN tunneling): Adapter
7-25
• CVA122 with 1 Ethernet, 1 USB, 2 FXS ports to support DOCSIS operation • CVA122E with 1 Ethernet, 1 USB, 2 FXS ports to support EuroDOCSIS operation
Other Cable Access Solutions Cisco 6920 RateMUX Statistical Multiplexer
Specialized multiplexing device that performs advanced MPEG2 stream manipulation to allow 7-27 cable, satellite and broadcast operators to support: • Customized channel lineups • Real-time bit rate manipulation • Rate reduction/splicing functionality and standards-based API support to interoperate with Ad Servers for local ad insertion in the digital (MPEG) video domain • Re-stat muxing • TV program grooming or add/drop
Remote Cable Access Network Management
Suite of network management products for configuration, troubleshooting, and maintenance of 7-28 Cable network and Cisco headend and CPE devices
DSL (Digital Subscriber Line) Access Product
Features
Page
7-29 Cisco 6000 Series IP DSL • Cisco 6015—Small footprint, ideal for MxU or small remote DSL applications, 48 ports Switches • Cisco 6160—Carrier-class, CO-based DSLAM, up to 256 ports per chassis, for North America • Cisco 6260—Carrier-class, CO-based DSLAM, for international environments
DSL Access CPE1
Wide variety of Cisco router-based DSL CPE solutions for business-class to small office applications
Broadband Services Aggregation
• Cisco 6400 Series Carrier-Class Broadband Aggregator—ATM switching core, up to 96,000 7-31 subscriber sessions per chassis • Cisco 7200 VXR Series Router—Up to 8000 sessions, PPP, PPPoE, PPPoA • Cisco 7400 Series Router—1 RU, up to 8000 sessions, supports one T1/T3, OC-3, ATM 7200 port adapter, PPP/L2TP, PPPoE, PPPoA, etc.
7-30
1. For ADSL, ISDN, and IDSL small office/home office (SOHO) customer premise equipment (CPE), see Chapter 1: Routers
Access Products at a Glance
7-2
cpqrg_ch1_access_low_res.fm Page 3 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Fixed Broadband Wireless Features
Page
Cisco WT-2750 Multipoint Excellent for “last-mile” broadband access Broadband Wireless • Point to point and Multipoint solution Solution • Leverages Cisco’s patented VOFDM technology for non-line-of-sight transmission
7-32
• Low-cost alternative to traditional broadband systems
ATM Multiservice WAN Switching Product
Features
Cisco BPX 8600 Series Switches
• Large-scale ATM + IP switch for service provider and large enterprise applications 7-34 • Narrowband and broadband services in a single, highly reliable platform using a multishelf architecture with intelligent call processing for Frame Relay and ATM switched virtual circuits (SVCs) • 20 Gbps of high-throughput switching for multiple traffic types data, voice, and video
Page
Cisco MGX 8850 Series IP + ATM Multiservice Switches
• Multiservice switch, scales from DS0 to OC-48c/STM-16 speeds 7-35 • Serves as a stand-alone device for narrowband services, an integrated edge concentrator or a broadband edge switch when equipped with 45 Gbps switch card and broadband ATM modules
Cisco MGX 8200 Series Multiservice Gateways
• Edge concentrators family provide a cost-effective narrowband multiservice solution for low 7-36 to mid-band ATM and Frame Relay aggregation with QoS management features
Cisco IGX 8400 Series Multiservice WAN Switches
• ATM-based WAN switching, connects to public services for reduced leased-line costs • Available with 8, 16, or 32 slots,
7-37
Long Reach Ethernet Product
Features
Page
Cisco Long Range Ethernet • Cisco Catalyst 2900 LRE XL Switches—12- or 24-port systems, deliver Ethernet traffic (up to 7-38 15 Mbps) over standard copper cabling; ideal for MxU broadband Internet access Solution • Cisco 575 LRE CPE Device—Compact, includes one RJ-45 Ethernet connection and two RJ-11 connectors (for telephone) • Cisco LRE 48 POTS Splitter—Ensures that POTS service is separate, and never compromised by LRE switch reconfigurations or downtime
Cisco Broadband Building • Server system enables automated online activation, integrated billing, tiered service levels 7-40 Service Manager • Ideal for any form of broadband access technology, including Ethernet, LRE, Cable access, DSL, Wireless, or Fiber
Access Products at a Glance
7-3
CHAPTER 7 ACCESS PRODUCTS
Product
cpqrg_ch1_access_low_res.fm Page 4 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Memory Information for Access Routers Router
Memory Type Slots Default Memory
Max Memory
Default Config. (Notes)
AS5300
System Flash DRAM Shared Boot Flash
2 2 1 1
16 MB 64 MB 16 MB 8 MB
16 MB 128 MB 16 MB 8 MB
Slot 0 = 8 MB Slot 0 = 32 MB; Slot 1 = 32 MB
AS5350
System Flash SDRAM Shared Boot Flash
N/A
32 MB 128 MB 64 MB 8 MB
64 MB 512 MB 128 MB 64 MB
2 2
16 MB 64 MB 16 MB 8 MB
16 MB 128 MB 16 MB 8 MB
AS5300/Voice Flash Gateway DRAM Shared Boot Flash
AS5400
System Flash SDRAM Shared Boot Flash
N/A
32 MB 256 MB 64 MB 8 MB
64 MB 512 MB 128 MB 16 MB
AS5800 Access Server/Voice Gateway
Flash (PCMCIA) Flash (internal) Shared (NPE-200) Shared (NPE-300) DRAM (NPE-200) DRAM (NPE-300)
1 1
16 MB 4 MB 4 MB 32 MB 128 MB 256 MB
40 MB 4 MB
Cisco CVA120 Config NVRAM
128 MB 256 MB
128 kB 16 MB 8 MB
DRAM Flash
Cisco uBR900 NVRAM
128 kB 4 MB 16 MB
Flash DRAM
Cisco uBR7100
Flash (PCMCIA) System SDRAM Packet SDRAM
2 2
48 MB 64 MB 64 MB
110 MB 256 MB 64 MB
Cisco uBR7200
Flash (PCMCIA) Flash (internal) Shared (NPE-300) DRAM (NPE-300)
2 1
16 MB 4 MB 32 MB 64 MB
110 MB 4 MB
4
256 MB
Memory Information for Access Routers
7-4
Slot 0 = 8 MB Slot 0 = 32 MB
Slot 0 = 48 MB Slot 0 = 64 MB
cpqrg_ch1_access_low_res.fm Page 5 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
The popular AS5300 Universal Access Server supports hybrid asynchronous dial-up and ISDN line service to accommodate both mobile users and high-bandwidth users. By terminating analog modem, ISDN, and voice calls on the same chassis from the same trunk line, the Cisco AS5300 enables ISPs and enterprise network managers to meet traditional analog dial access needs, while supporting the growing demand for multiservice access.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5300
• • • • •
High performance async/ ISDN/VoIP Support for VoIP Full range of Cisco IOS software options Best-of-breed modem management Distributed access pools with WAN backhaul
Key Features • Supports ISDN, V.90/56K modem, and voice calls (with VoIP feature cards) • Cisco IOS-based • One 10-MB and one 10/100 MB Ethernet interface to allow for redundant, high-speed backhaul • Accommodates 8 PRI/TI/EI lines, terminates up to 192 (T1 config) or 240 (E1 config) concurrent modem/ISDN data calls, up to 96/120 voice and FAX calls (T1/E1) • SS7 interoperability with signaling gateway
Competitive Products • 3Com: TCH HiPer • Ascend: TNT
• Lucent: MAX 6000 and PM-3 • Nortel: CVX 1800
Specifications Feature
Cisco AS5300
Fixed LAN Ports (connections)
2 Ethernet ports (one 10BASE-T and one 100BASE-T)
Fixed WAN Ports (connections)
4 or 8 channelized or PRI (T1/E1) ports 4 T1/E1 sync serial ports
Modular Slots
3
Modules and Cards Available
See parts list for variety of T1/E1/PRI interface cards and modem/voice DSP modules
Processor Speed (type)
150-MHz (R4700)
Maximum Async Connections
240
Maximum Voice Sessions
120
Flash Memory
8 MB Boot Flash (default) 16 MB System Flash (default)
Cisco AS5300 Universal Access Server
7-5
CHAPTER 7 ACCESS PRODUCTS
Cisco AS5300 Universal Access Server
cpqrg_ch1_access_low_res.fm Page 6 Friday, August 17, 2001 11:12 AM
Chapter 7
Feature
Cisco AS5300
Shared Memory
16 MB packet (default) 16 MB main (max)
DRAM Memory
64 MB
Power Supply
Single AC/DC (default) Internal redundant/loadsharing AC/DC (optional)
Dimensions (HxWxD)
3.5 x 17.5 x 18.25 in.
Access Products
Cisco IOS Software and Memory Requirements1 To run the Cisco IOS Software Feature Packs, you need the amount of memory shown in the following table: Distribution1 Feature Pack Part Number Description
System Flash DRAM IOS Image Memory Memory Release Required Required
Shared Boot Flash Memory Memory Required Required
CD53-CP-12.1.1=
15IP Plus Feature Set
12.1(1)
8 MB
32 MB
16 MB
4 MB
CD53-CL-12.1.1=
15IP Plus IPSec 56 Feature Set 12.1(1)
8 MB
32 MB
16 MB
4 MB
CD53-AP-12.1.1=
15Enterprise Plus Feature Set
12.1(1)
8 MB
64 MB
16 MB
8 MB
CD53-AL-12.1.1=
15Enterprise Plus IPSec 56 Feature Set
12.1(1)
8 MB
64 MB
16 MB
8 MB
1. For the complete list of IOS Feature Sets, refer to the parts list, via the URL listed under “For More Information”. For users with CCO access, search by IOS feature or release via the Feature Navigator at http://www.cisco.com/go/fn
Selected Part Numbers and Ordering Information1 Cisco AS5300 Series Access Server Bundles1 AS53-96DMM-RPS-CH AS53-120-RPS-CH AS53-192-DC-RPS-CH AS53-192-RPS-CH
AS5300, 96 DMM Modems, Octal T1/PRI, IP IOS, RPS AS5300, 120 Modems, Quad E1/PRI, Redundant AC Power, IP IOS AS5300, 192 Modems, Octal T1/E1/PRI, Redundant DC Power, IP IOS AS5300, 192 Modems, Octal T1/PRI, Redundant AC Power, IP IOS
Cisco AS5300 VoIP Bundles AS5300-96VOIP-A
AS5300 VoIP Gateway-96 Voice Channels/4T1+,IOS IP+ S53CVP
Cisco AS5300 Series Memory Options MEM-64M-AS53= MEM-32F-AS53= MEM-128M-AS53=
Cisco AS5300, 32 MB to 64 MB Main DRAM Upgrade Cisco AS5300 System Flash Upgrade (from 16 MB to 32 MB), spare 128 MB DRAM memory for 5300
Cisco AS5300 Feature Cards AS53-4CT1+= AS53-8CT1+= AS53-96-CC2=
Quad T1/PRI Plus High Speed Serial, Spare Octal T1/PRI Plus High Speed Serial, Spare MICA CC2 carrier card and 8 MICA 12 port DMM modem modules
Cisco AS5300 Series Accessories AS5300RM-19= AS5300RM-24= AS53-AC-RPS=
Cisco AS5300, 19-Inch Rack Mount Kit Cisco AS5300, 24-Inch Rack Mount Kit Cisco AS5300, Dual AC Power Supply
Cisco AS5300 Series Basic Maintenance CON-SNT-PKG13 CON-SNT-PKG14
SMARTnet Maintenance for AS53-48DMM-CH SMARTnet Maintenance for AS53-48-CH, AS53-96-CH, AS53-96-RPS-CH, AS53-192-DC-RPS-CH, and AS53-96DMM-RPS-CH
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco AS5300 Series web site: http://www.cisco.com/go/as5300 Cisco AS5300 Universal Access Server
7-6
cpqrg_ch1_access_low_res.fm Page 7 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco AS5300/Voice Gateway
The AS5300/Voice Gateway supports 96 voice/fax channels in the 4-T1 configuration, and 120 voice/fax channels in the 4-E1 configuration.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5300/Voice Gateway
• Carrier class/industry-leading voice quality: essential for SP applications, especially for the most demanding wholesale voice, long-distance voice, and corporate/enterprise applications • Digital T1/E1/PRI interfaces and integrated CSUs: essential for interfacing to digital switches, PBXs, and PSTN around the world, with no additional equipment
Key Features • Industry-leading and award-winning; H.323 and MGCP compliant Voice Gateway • Supports up to 96/120 voice or fax calls in 4 T1/4 E1 configurations • 2 RU (rack unit) form factor • Provides easy, low cost entry into voice applications vs. expensive TDM products • Supports Direct Inward Dial (DID) and 2-Stage applications with integrated IVR • Perfect for service provider and enterprise applications • Interfaces to digital switches and PBXs
Competitive Products • 3Com: Total Control Telephony Gateway • Lucent: MAX 6000 MultiVoice Gateway, MAX TNT • Clarent: Gateway
• Nuera voice gateways • VocalTec voice gateways
Cisco AS5300/Voice Gateway
7-7
CHAPTER 7 ACCESS PRODUCTS
The Cisco AS5300/Voice Gateway is an award-winning, high performance, Voice over IP (VoIP) gateway. It interfaces directly to digital switches, PBXs, and public telephone networks to carry/switch voice traffic across IP networks. The AS5300/Voice Gateway is fully equipped with high-density Voice Feature Cards (VFCs) and voice-enabled Cisco IOS software, to support carrier-class VoIP and FAX-over-IP services. Furthermore, it is H.323 compliant and includes a family of industry voice CODECs including G.711 (64kb/s), G.729 (8kbps), and G.723.1 (5.3/6.3kbps), and also supports up to 14.4kbps Fax Relay. In addition to an integrated IVR system, it includes RADIUS for generating call detail records (for billing and authentication) and SNMP for network/element management applications. This feature-rich platform supports a wide range of services including debit card, international wholesale voice, SS7, Internet call waiting, and much more.
cpqrg_ch1_access_low_res.fm Page 8 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Specifications Feature
Cisco AS5300/Voice Gateway
Fixed LAN Ports (connections)
2-port Ethernet (one 10BASE-T, one 10/100BASE-T, FE)
Fixed WAN Ports (connections)
4-port sync serial 4 T1 (Cisco AS5300—96VoIP) 4 E1 (Cisco AS5300—120VoIP)
Modular Slots
3 (one for Quad T1/E1, two for VoIP feature cards)
Modules and Cards Available
All VoIP modules are already installed with this configuration
Maximum Voice/Fax Channels
96 voice channels with 4 T1 config;120 with 4 E1 config
Processor Speed (type)
150-MHz (R4700 RISC)
Flash Memory
16 MB
DRAM Memory
64 MB main DRAM
Power Supply
Single AC/DC (default) Internal redundant/loadsharing AC/DC (optional)
Dimensions (HxWxD)
3.4 x 17.5 x 18.25 in.
Selected Part Numbers and Ordering Information1 Cisco AS5300/Voice Gateway—Complete Systems1 AS5300-96VoIP-A
AS5300-120VoIP-A
A fully configured, 96 channel, Cisco AS5300/Voice Gateway system for T1/North America applications; it includes: • Cisco AS5300 base unit with AC power supply (DC or dual/redundant optional) • 4 T1, 96 voice/fax channels • IOS, IP Voice Plus, SF53-CVP • All voice CODEC feature set software, VC-SWA-4.0x • 16 MB Flash; 64 MB DRAM A fully configured, 120 channel, Cisco AS5300 Voice Gateway system for E1/International applications; it includes: • Cisco AS5300 base unit with AC power supply (DC or dual/redundant optional) • 4 E1, 120 voice/fax channels • IOS, IP Voice Plus, SF53-CVP • All voice CODEC feature set software, VC-SWA-4.0x • 16 MB Flash; 64 MB DRAM
Cisco AS5300/Voice Gateway Series Basic Maintenance CON-SNT-PKG15
Cisco AS5300-96VOIP-A SMARTnet Maintenance
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco AS5300/Voice Gateway web site: http://www.cisco.com/go/as5300
Cisco AS5300/Voice Gateway
7-8
cpqrg_ch1_access_low_res.fm Page 9 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco AS5350 Universal Gateway
Universal port functionality enables the AS5350 to operate simultaneously as a dial-up network access server (NAS) and a voice gateway to deliver universal services. It achieves cost savings through optimized utilization of the universal port access infrastructure. Service providers can now quickly capitalize on new opportunities and realize multiple revenue streams from a single access infrastructure.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5350
• 2 to 8 channelized T1/E1/PRI compact and modular dial access server • High-performance modem, ISDN, and voice call termination • Universal port services (data, voice, wireless, fax)
Key Features • 1 RU modular high-performance 2 to 8 channelized T1/E1/PRI system • Universal Gateway—Remote Access Server and Voice Gateway • Universal DSPs—Data, voice, wireless and fax services on any DSP at any time • Ideal for Tier 2/3 ISPs and enterprises requiring innovative remote access • Dial feature cards: –
2, 4, or 8 CT1/CE1/PRI DFC cards (ISDN calls terminated on the card)
–
60 or 108 channel Universal Port dial feature card
• Two 10/100BaseT autosensing Ethernet LAN ports • Two 8 Mbs serial WAN ports for Frame Relay, HDLC, or PPP WAN backhaul • One Fast console port for local administrative access; one auxiliary port for remote administrative access • Carrier Class Resiliency: –
All dial feature cards and fan tray are hot swappable
–
AC internal power supply with dual fans
–
Redundant LAN/WAN backhaul ports
–
Thermal management and environmental monitoring
Cisco AS5350 Universal Gateway
7-9
CHAPTER 7 ACCESS PRODUCTS
The Cisco AS5350 Universal Gateway is the industry’s only one-rack unit, 2, 4, or 8 T1/E1 dial access gateway that provides universal port data, voice, wireless, fax and unified communications services on any port at any time. The Cisco AS5350 offers high-performance and high-reliability in a compact, modular design. This cost-effective platform is ideally suited for Internet service providers (ISPs) and enterprises that require innovative universal services.
cpqrg_ch1_access_low_res.fm Page 10 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Competitive Products • Lucent/Ascend: Max 3000 and Max 4000 • 3Com: TC1000 • Intel/Shiva: LanRover series
• Lucent/Livingston: Portmaster 3 • Nortel/Bay: 5399
Specifications Feature
Cisco AS5350
Processor
250 MHz RM7000 RISC processor
Memory
SDRAM: 128 MB (default), 512 MB (maximum) Shared Input/output (I/O): 64 MB (default), 128 MB (maximum) Boot Flash: 8 MB (default), 16 MB (maximum) System Flash: 32 MB (default), 64 MB (maximum) Layer 3 Cache: 2 MB
DFC Slots
Three slots
Egress Ports
Two 10/100-MB Ethernet ports Two 8-MB serial ports T1, E1 DS1 trunk DFCs
LAN Protocols
IP, IPX, AppleTalk, DECNet, ARA, NetBEUI, bridging, HSRP
WAN Protocols
Frame Relay, PPP, HDLC (leased line)
Routing Protocols
RIP, RIPv2, OSPF, IGRP, EIGRP, BGPv4, IS-IS, AT-EIGRP, IPX-EIGRP, Next Hop Resolution Protocol (NHRP), AppleTalk Update-Based Routing Protocol (AURP)
Access Protocols
PPP, Serial Line Internet Protocol (SLIP), TCP Clear, IPXCP, ATCP, ARA, NBFCP, NetBIOS over TCP/IP, NetBEUI over PPP, protocol translation (PPP, SLIP, ARA, X.25, TCP, local-area transport [LAT], Telnet), and Xremote
Bandwidth Optimization
Multilink PPP (MP), MLP, TCP/IP header compression, Bandwidth Allocation Control Protocol (BACP), bandwidth on demand, nonfacility-associated signaling (NFAS), traffic shaping
Voice Compression
G.711, G.723.1, (5.3K and 6.3K), G.729a, G.729b
DSP Voice Features
Echo cancellation Transparent transcoding Voice activity detection/silence suppression DTMF, Multifrequency (MF)
Voice and Fax Signaling Protocols
H.323v2, H.323v3, SIP, SGCP T.38 real-time fax relay
Network Security
RADIUS or TACACS+ PAP or CHAP authentication Local user/password database DNIS, CLID, call-type preauthentication Inbound/outbound traffic filtering (including IP, IPX, AppleTalk, bridged traffic) Network Address Translation (NAT) Dynamic access lists
Virtual Private Networking IP Security (IPSec) Policy enforcement (RADIUS or TACACS+) L2TP, Layer 2 Forwarding (L2F), and generic routing encapsulation (GRE) tunnels Firewall security and intrusion detection QoS features (committed access rate [CAR], Random Early Detection [RED], IP Precedence, policy-based routing)
Channelized T1
Robbed-bit signaling; Loop Start, Immediate Start, and Wink Start Protocols
Channelized EI
CAS, PRI, E1 R1, E1 R2, leased line, Frame Relay
ISDN Protocols Supported Sync mode PPP, V.120, V.110 at rates up to 38400 bps Network- and User-side ISDN NFAS with backup D-channel QSIG, Feature Group B, Feature Group D DoVBS
Cisco AS5350 Universal Gateway
7-10
cpqrg_ch1_access_low_res.fm Page 11 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Feature
Cisco AS5350 V.90 standard supporting rates of 56000 to 28000 in 1333-bps increments K56Flex at 56000 to 32000 in 2000-bps increments Fax out (transmission) Group 3, standards EIA 2388 Class 2 and EIA 592 Class 2.0, at modulations V.33, V.17, V.29, V.27ter, and V.21 ITU-T V.34 Annex 12, ITU-T V.42bis, V.32bis and many others
Wireless Protocols Supported
V.110 MNP10EC
Application Specific Support
AOL, MSN, CompuServe, and Prodigy traffic
Full Cisco IOS Support
IP Plus and Enterprise Plus
Console and Auxiliary Ports Asynchronous serial (RJ-45) Chassis
Dimensions (H x W x D): 1.75 x 17.5 x 20.5 in. Weight (fully loaded): 22 lbs. (10 kg)
Selected Part Numbers and Ordering Information1 Cisco AS5350 Universal (Data & Voice) System Bundles1 AS535-2T1-48-AC AS535-2E1-60-AC AS535-4T1-96-AC AS535-4E1-120-AC AS535-8T1-192-AC AS535-8E1-210-AC
AC Chassis, 2 T1/PRI, 60 ports, 48 UP licenses, IP Plus IOS AC Chassis, 2 E1/PRI, 60 ports, 60 UP licenses, IP Plus IOS AC Chassis, 4 T1/PRI, 120 ports, 96 UP licenses, IP Plus IOS AC Chassis, 4 E1/PRI, 120 ports, 120 UP licenses, IP Plus IOS AC Chassis, 8 T1/PRI, 216 ports, 192 UP licenses, IP Plus IOS AC Chassis, 8 E1/PRI, 216 ports, 210 UP licenses, 240 ISDN, IP Plus IOS
Cisco AS5350 Spare Chassis AS5350-AC= AS5350-DC=
AC 5350 Chassis with Motherboard, IP Plus IOS, default memory DC 5350 Chassis with Motherboard, IP Plus IOS, default memory
Cisco AS5350 Software S535CP-12103XQ S535AP-12103XQ
Cisco AS5350 Series IOS IP Plus Cisco AS5350 Series IOS Enterprise Plus
Cisco AS5350 Memory Options & Spares MEM-UP1-AS535 MEM-16BF-AS535 MEM-64F-AS535 MEM-256M-AS535 MEM-128S-AS535
16M Bootflash,64M System Flash,256M Main,128M Shared I/O Memory AS5350 16MB Boot Flash upgrade AS5350 64MB System Flash upgrade AS5350 256MB Main SDRAM upgrade AS5350 128MB Shared I/O upgrade
Cisco AS5350 Spare DFC Boards AS535-DFC-2CT1= AS535-DFC-60NP= AS535-DFC-CC=
AS5350 Dual T1/PRI DFC card AS5350 60 Nextport DFC card AS5350 DFC Carrier Card
Cisco AS5350 Spare Accessories AS5350RM-19/24= AS535-FTA= AS535-AC-PWR= AS535-DFC-CC=
AS5350 19/24 Rack Mount Kit, Spare AS5350 Fan Tray Assembly, Spare AS5350 AC Power Supply, Spare AS5350 DFC Carrier Card
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Cisco AS5350 Series Web site: http://www.cisco.com/go/as5350
Cisco AS5350 Universal Gateway
7-11
CHAPTER 7 ACCESS PRODUCTS
Modem Protocols Supported V.92 Modem on Hold, Quick Connect, PCM Upstream
cpqrg_ch1_access_low_res.fm Page 12 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco AS5400 Universal Gateway The Cisco AS5400 Universal Gateway offers unprecedented capacity in only two rack units (2 RUs) with universal port data, voice, wireless, fax, and unified communications services on any port at any time. Its high density (up to 1 CT3), low power consumption (7.2A at 48VDC per CT3), and Universal Port digital signal processors (DSPs) make it ideal for many network deployment architectures, especially co-location environments and mega points of presence (POPs). Universal port functionality enables the Cisco AS5400 to operate simultaneously as a dial-up network access server (NAS) and voice gateway. It achieves cost savings through optimized utilization of the universal port access infrastructure. Service providers can now quickly capitalize on new opportunities and realize multiple revenue streams from a single access infrastructure.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5400
• • • • •
High density in a small footprint (16 T1/E1 or 1 channelized T3) Universal Port services Low power per port High performance async/ISDN/VoIP/Wireless Flexible redundant backhaul methods
Key Features • Universal port services—Remote dial access, voice and fax on a call-by-call basis. The universal port DSP implements multiple CODEC and modem algorithms on any DSP at any time. Once the type of CODEC or modem required for a specific call has been determined, the DSP switches to the appropriate service type in real time. • Rich IOS-based software feature set enables high value services—Wholesale dial, wholesale VoIP, pre-paid calling, enhanced voice services, mobile wireless data, unified communications • Highest density in a 7-foot rack—14,112 remote access ports or 8,064 universal ports • The industry’s only 2RU, CT3-capable universal gateway on the market that provides hot-swappable cards, internal redundant power supply, and environmental monitoring • Cisco SS7 signaling gateway interoperability
Competitive Products • 3Com/CommWorks: Total Control 1000 • Alcatel: X1000
• Lucent: Max 6000 • Clarent: Gateway
Cisco AS5400 Universal Gateway
7-12
cpqrg_ch1_access_low_res.fm Page 13 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Specifications Cisco AS5400
Processor Type
250-MHz RM7000 RISC processor
Memory
SDRAM: 256 MB (default), 512 MB (maximum); Layer 3 cache: 2 MB Shared input/output (I/O): 64 MB (default) 128 MB (maximum) Boot Flash: 8 MB (default) 16 MB (maximum); System Flash: 32 MB (default) 64 MB (maximum)
DFC Slots
7
DFC Trunk Cards
8 Channelized T1/E1/PRI 1 CT3
DFC DSP Card
60/180 Universal ports DFC
Capacity
In CT3 config, up to 648 data calls or up to 384 universal port (voice and data) calls
LAN interface
Two 10/100 autosensing Fast Ethernet ports
Serial interfaces
Two 8 Mbps serial line interfaces for backhaul WAN support
LAN Protocols
IP, IPX, AppleTalk, DECnet, ARA, NetBEUI, bridging, HSRP
WAN Protocols
Frame Relay, PPP, HDLC (leased line)
Routing Protocols
RIP, RIPv2, OSPF, IGRP, EIGRP, BGPv4, IS-IS, AT-EIGRP, IPX-EIGRP, Next Hop Resolution Protocol (NHRP), AppleTalk Update-Based Routing Protocol (AURP)
Access Protocols
PPP, Serial Line Internet Protocol (SLIP), TCP Clear, IPXCP, ATCP, ARA, NBFCP, NetBIOS over TCP/IP, NetBEUI over PPP, protocol translation (PPP, SLIP, ARA, X.25, TCP, LAT, Telnet), & XRemote
Bandwidth Optimization
Multilink PPP (MLPPP), TCP/IP header compression, Bandwidth Allocation Control Protocol (BACP), Bandwidth on demand, Traffic shaping
Voice Compression
G.711, G.723.1 (5.3K and 6.3K), G.729a, G.729b
DSP Voice Features
DTMF, MF G.168 echo cancellation, 128 ms tail length; A-law and mu-law encoding Voice activity detection, silence suppression, comfort noise, fixed and adaptive jitter buffering Call progress tone detection and generation—Dial tone, busy, ring-back, congestion, and re-order tones, with local country variants
Voice and Fax Signaling Protocols H.323v2/v3, SIP; T.38 real-time fax relay Network Security
RADIUS or TACACS+, PAP or CHAP authentication, local user/password database DNIS, CLID, call-type pre-authentication Inbound/outbound traffic filtering (including IP, IPX, AppleTalk, bridged traffic) Network Address Translation (NAT) and Dynamic access lists
Virtual Private Networking
IP Security (IPSec) and Policy enforcement (RADIUS or TACACS+) L2TP, Layer 2 Forwarding (L2F), and generic routing encapsulation (GRE) tunnels Firewall security and intrusion detection QoS features (committed access rate, random early detection, IP precedence, policy-based routing)
Channelized T1
Robbed-bit signaling; loop start, immediate start, and wink start protocols
Channelized E1
CAS, E1 R1, E1 R2, leased line, Frame Relay
ISDN Protocols Supported
Sync mode PPP, V.120, V.110 at rates up to 38400 bps; Network- and User-side ISDN; NFAS with backup D-channel; QSIG; DoVBS
Modem Protocols Supported
V.92 Modem on Hold, Quick Connect, PCM Upstream V.90 ,K56Flex Fax out (transmission) Group 3, standards EIA 2388 Class 2 and EIA 592 Class 2.0, at modulations V.33, V.17, V.29, V.27ter, and V.21 ITU-T V.34 Annex 12, ITU-T V.42bis, V.32bis and many others
Wireless Protocols
V.110 and MNP10EC
Full Cisco IOS Support
IP Plus and Enterprise Plus
Console and Auxiliary Ports
Asynchronous serial (RJ-45)
Chassis Dimensions (H x W x D) 3.5 x 17.5 x 18.25 in. Chassis Weight (fully loaded)
35 lb maximum (15.8 kg)
For More Information See the Cisco AS5400 Web site: http://www.cisco.com/go/as5400 Cisco AS5400 Universal Gateway
7-13
CHAPTER 7 ACCESS PRODUCTS
Feature
cpqrg_ch1_access_low_res.fm Page 14 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco AS5850 Universal Gateway The Cisco AS5850 Universal Gateway is the highest density carrier-class access server on the market. Offering unparalleled capacity and availability, it is designed to meet the demands of large Internet service providers by supporting up to 2688 calls (4xCT3s) or 86 E1s in a single chassis. The Cisco AS5850 offers high-availability features such as hot-swap on all cards, hot spares, redundant hot-swappable power supplies, redundant switch fabrics, and redundant routers to ensure 99.999% availability. In addition, universal port readiness makes it ideal for many network deployment architectures. The Cisco AS5850 enables service providers to address fast-growing revenue opportunities such as wholesale dial access.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5850
• • • • •
Hybrid async and ISDN with the capability to upgrade to full universal port (including VoIP) Up to 2688 modem connections Service provider or IP-focused installations Highly available single system with multiple redundancy Wholesale dial, retail dial, or wireless applications
Key Features • High availability architecture, with redundancy and hot swap capability • Supports up to 2688 ports with future expandability to higher density • Up to 4 Channelized T3 or 86 Channelized E1/PRI interfaces • Port management features for large-scale wholesale dial applications • ETSI/NEBS Level 3 compliant • Distributed, multiprocessor design for maximum performance and growth • SS7/C7 support through the Cisco SC2200 signaling controller • V.110, MNP-10EC, and PIAFS protocol support for wireless applications
Competitive Products • 3Com: TCH HiPer • Lucent: MAX TNT, APX 8000
• Nortel: Aptis CVX 1800 • Alcatel: 1600 / 7410 Access Server
Specifications Feature
Cisco AS5800
Expansion Slots
14
Port Capacity
Up to 2688 data ports, designed to support higher density
Processor Speed (type)
Multiple 266 or 252 MHz RISC processors in a distributed architecture
RSC Switch Fabric
5 GBps, Layer 3/4
TDM Bus Capacity
8192 DS0s
Cisco AS5850 Universal Gateway
7-14
cpqrg_ch1_access_low_res.fm Page 15 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco AS5800
DRAM Memory
512 MB DRAM in each RSC card 128 MB DRAM in each DFC card
Ingress Options
CT3 and E1
DFC Card Options
324 universal port card, 1 CT3 + 216 universal ports card and 24 E1 card
Egress Options
Dual redundant Gigabit Ethernet per RSC card
Power Supply
Redundant / loadsharing AC or DC
Dimensions (HxWxD)
24.5 x 17.5 x 24 in.
CHAPTER 7 ACCESS PRODUCTS
Feature
For More Information See the Cisco AS5850 Web site: http://www.cisco.com/go/AS5850
Cisco AS5800 Access Server/Voice Gateway The Cisco AS5800 Access Server/Voice Gateway is a high-performance, high-density universal dial access server that delivers hybrid asynchronous serial, ISDN, and voice services. By terminating analog modems, voice, and ISDN calls on the same chassis from the same trunk line, the Cisco AS5800 series enables carrier-class service providers and enterprise networks to meet traditional analog dial access needs, while supporting the growing demand for voice services and high-speed ISDN access.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco AS5800 Access Server
• • • • • •
Cisco AS5800/Voice Gateway
• Hybrid async, ISDN, and VoIP • Up to 1344 voice ports • G.711, G.729, G.723.1 voice CODECs and Fax Relay capability
Hybrid async and ISDN Up to 1440 ISDN or 2016 modem connections Service provider or IP-focused installations Highly available single system with multiple areas of redundancy Wholesale dial, retail dial or wireless applications Configurations that need redundant router shelf failover
Key Features • Supports up to two T3s; for 2016 modem data calls, 1440 ISDN data calls, or 1344 voice calls • Universal access provides ability to answer voice, ISDN, and 56K modems • Port management features for large scale wholesale dial applications • ETSI/NEBS Level 3 compliant • 324-port modem card that can also be used in the AS5850 • Distributed, multiprocessor design for maximum performance and growth • SS7/C7 support through the Cisco SC2200 signaling controller • V.110, MNP-10EC and PIAFS protocol support for wireless applications Cisco AS5800 Access Server/Voice Gateway
7-15
cpqrg_ch1_access_low_res.fm Page 16 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
• Broadest selection of backhaul interfaces of any access server
Competitive Products • 3Com: TCH HiPer • Lucent: PM-4, MAX TNT, APX 8000
• Nortel: Aptis CVX 1800 • Alcatel: 1600 / 7410 Access Server
Specifications Feature
Cisco AS5800
Expansion Slots
14
Maximum Port Capacity
1344 for voice and 2016 for data; 1440 for ISDN-only calls
Processor Speed (type)
RS7206VXR Router shelf: 300 MHz
Flash Memory
4 MB Boot Flash 40 MB PCMCIA
Shared Memory
4 MB SRAM
DRAM Memory
256 MB (RS726VXR)
Ingress Options
CT3, T1, E1
DFC Card Options
144 and 324 port modem cards; 96,192, and 336 port voice cards
Egress Options
Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, HSSI, FDDI, ATM, POS, T1, E1, T3, OC3, and others
Power Supply
Redundant/loadsharing AC or DC
Dimensions (HxWxD)
33.25 x 17.5 x 24 in.
For More Information See the Cisco AS5800 Web site: http://www.cisco.com/go/AS5800
Cisco AccessPath—UGS4 Carrier-Class Integrated Universal Gateway Solution Cisco AccessPath™—UGS4 provides a pre-configured, high-density, very high-port count solution for universal gateway points of presence (POPs) by leveraging multiple Cisco AS5400 Universal Gateways, routers, and switches in a single fully-integrated 7-foot rack system. This carrier-class configuration ensures cost-effective scalability from 1344 channels (2 x T3) to 9408 channels (14 x T3) in T1 configurations and from 960 channels (32 x E1) to 5760 channels (192 x E1) in E1 configurations.
For More Information See the Cisco AccessPath—UGS4 web site: http://www.cisco.com/go/accesspath
Cisco AccessPath—UGS4 Carrier-Class Integrated Universal Gateway Solution
7-16
cpqrg_ch1_access_low_res.fm Page 17 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Remote Dial Access Network Management Products The Cisco Universal Gateway Manager (UGM) is a next-generation element management system offering robust, scalable, carrier-class capabilities for the Cisco AS5000 series of Universal Gateways. Providing comprehensive FCAPS (fault, configuration, accounting/inventory, performance, security) capabilities, the UGM enables operators to effectively configure, manage, and maintain dial access networks. The Cisco UGM facilitates the rapid deployment of new services and provides quick and effective network diagnostics to meet the rigorous demands of today's fast-moving marketplace.
FastStep for Access Servers The FastStep for Access Servers configuration tool offers three main features to make the set up of an AS5300 quick and painless. The first is a simple GUI interface for fast configuration and set up; the second is a step by step configuration of trunk lines, LAN and WAN interfaces, IP address pools, and authentication; and the third is an easy download utility to load IOS and modem portware images to server. Fast Step for Access Servers comes bundled with every AS5300 purchase.
Resource Pool Manager Cisco Resource Pool Management (RPM) allows wholesale dial access providers to virtually lease dial ports to their retail ISP customers. RPM enables wholesalers to aggregate their dial resources across access servers and allocate subsets of these resources to retail ISPs. Service level agreements (SLA) for dial access with each retail ISP is enforced by RPM. Resource pool management can be done using the RPM component of the resource pooling solution on the NAS or by using this in conjunction with one or more external Cisco Resource Pool Manager Servers (RPMS).
Voice Manager See Chapter 9—Cisco IOS Software & Network Management, page 9-19, for more information on Voice Manager.
Selected Part Numbers and Ordering Information1 FastStep for Access Servers1 FS-5300-1.1=
FastStep for 5300
Resource Pool Manager FR53-RPML-192 FR5X-PM-LIC CRPMS-1.0
Resource Pool Manager License 192 Ports Port management license for 1 port (includes Resource Pool Manager, Call Tracker) Cisco Resource Pool Manager Server v1.0 (1 server)
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
Remote Dial Access Network Management Products
7-17
CHAPTER 7 ACCESS PRODUCTS
Universal Gateway Manager (UGM)
cpqrg_ch1_access_low_res.fm Page 18 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
For More Information See the Access Server Web site or the Element Management Framework (EMF) Web site for more information on the Universal Gateway Manager: http://www.cisco.com/go/as and http://www.cisco.com/go/emf See the FastStep web site: http://www.cisco.com/go/faststep See the Resource Pool Manager site: http://www.cisco.com/go/rpm See the Voice Manager web site: http://www.cisco.com/go/cvm
SS7 Signaling Products Cisco AS5300, AS5400, and AS5800 series products interoperate with various SS7 solutions, including the Cisco SC2200 SS7 Signaling Controller, as well as partner solutions such as HP OpenCall Internet Access Controller, ipVerse Control Switch/Internet Call Diversion, and Illuminet Internet Offload Signaling.
Cisco SC2200 Signaling Controller The Cisco SC2200 combined with the AS5x00 gateways give service providers around the world a proven cost-saving and reliable solution for connecting VoIP and dial access solutions to the public switched telephone network via SS7/C7. Using the SC2200 with SS7 signaling allows Service Providers to enter into new markets, optimize their networks for both voice and data traffic, and save drastically on monthly interconnect fees, because SS7 trunks cost a fraction of PRI trunks. Deployed since 1998, the Cisco SC2200 software runs on industry-standard Sun UNIX platforms. Cisco continues to improve its SC2200 software-call-control engine, bringing manageability, superior scaling, and dramatic savings to end-to-end dial and voice solutions.
Cisco VSC3000 Virtual Signaling Controller The Cisco VSC3000, or Media Gateway Controller (MGC), is an intelligent call agent with universal protocol support. Functioning as a "soft switch," the Cisco VSC3000 controls the packet telephony network by directing calls across broadband, multiservice packet infrastructures. It utilizes open and widely recognized industry-standard protocols and interfaces. The Cisco VSC3000 is the catalyst for enabling the transition from legacy switched circuit networks to converged VoIP- and VoATM-based packet networks by interfacing with telephony networks via Signaling System 7 (SS7/C7). Cisco VSC3000 call control is enabled by Cisco MGC software running on UNIX open computing platforms. For More Information See the VSC3000 Web site: http://www.cisco.com/go/vsc
SS7 Signaling Products
7-18
cpqrg_ch1_access_low_res.fm Page 19 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Additional Remote Dial Access Products
• For sites that require access via multiple external analog modems, the AS2509/AS2511-RJ access servers (see page 1-18) and 2600 series routers (see page 1-20) are ideal for low-density, dial applications. • For small office ISDN connectivity, see Cisco 800 series routers (see page 1-10).
Cisco ATA 186—Analog Telephone Adaptor (for Voice over IP Applications) The Cisco ATA 186 Analog Telephone Adaptor is a handset-to-Ethernet adaptor that interfaces regular analog phones with IP-based telephony networks. It is installed at the subscriber’s premises and supports two voice ports, each with its own independent phone number. This adaptor takes advantage of broadband pipes deployed through DSL, fixed wireless, cable modems, and other Ethernet connections. The Cisco ATA 186 is the ideal solution for service providers deploying IP telephony services in residential markets while taking advantage of standard telephone handsets. By deploying VoIP as a second-line service, service providers can offer additional revenue-generating services for emerging telephony applications. Key Features • Interfaces legacy telephones to IP-based networks • Two voice ports support legacy (analog) touch-tone telephones • RJ-45 connection to 10/100Base-T Ethernet hub/switch • Web configuration through built-in Web server • Voice activity detection (VAD) saves bandwidth by delivering voice, not silence • Standards-based protocols H.323 and SIP For More Information See the ATA 186 Web site: http://www.cisco.com/go/ata
Cisco MGX 8260 Media Gateway A high-density, carrier-class gateway that intelligently switches TDM and voice over IP (VoIP) traffic across packet networks to significantly reduce costs, improve availability, and manage escalating demand. For More Information See the MGX 8260 Web site: http://www.cisco.com/go/mgx8260 Additional Remote Dial Access Products
7-19
CHAPTER 7 ACCESS PRODUCTS
• In addition to the AS5300/AS5400 series access gateways, the Cisco 2600/3600 series routers (see pages 1-20 and 1-25) also support dial-up, data, and voice access via network and modem modules, and voice interface cards.
cpqrg_ch1_access_low_res.fm Page 20 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Remote Cable Access Solutions Overview Cisco offers a complete portfolio of standards-based products that deliver high-quality IP-based data, voice, and video services over a broadband cable infrastructure. Standards supported include Data-Over-Cable Service Interface Specifications (DOCSIS), and EuroDOCSIS (E-DOCSIS). Cisco is committed to being at the forefront to advance open standards and continue to innovate broadband cable data, voice and digital entertainment offerings. Cisco product offerings in Cable include: • Headend and distribution hub equipment • Enterprise and customer premise equipment (CPE) • Video equipment • Network management and operational support systems
Cisco uBR7100 Series Universal Broadband Router The Cisco uBR7100 is a complete, compact, easy-to-use product that enables cost-effective, high-speed Internet access in the hospitality, multi-dwelling (MDU) and multi-tenant (MTU) market space using the existing coaxial cable already in a building. This series requires exceptionally low capital investment and minimal setup time to provide online Internet access. For Tier 2 or Tier 3 cable operators, it is the industry’s most cost-effective, feature-rich CMTS and integrated router. The Cisco uBR7100 Series models are CableLabs® DOCSIS 1.0 qualified CMTSs and are available in four versions. Cisco uBR7111 and Cisco uBR7111E contain one downstream port and one upstream port. The Cisco uBR7114 and Cisco uBR7114E contain one downstream port and four upstream ports. The products support bi-directional or telco-return traffic.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco uBR7100 Series
• For MxU customers: the Cisco uBR7100 Series enables high-value Internet services over their current cable infrastructure • For cable operators: the Multi-tenant/dwelling Unit (MxU) market represents an untapped opportunity to expand broadband cable service. Given the small subscriber base of a typical MxU setting, the challenge has been to deliver robust services quickly and cost-effectively for an accelerated break-even point and a quicker return on investment—which is enabled by the Cisco uBR7100 series
Key Features • Complete package that includes a combined router and CMTS with an integrated upconverter, embedded Network Interface and configuration tools to provision hosts, cable modems, and set top boxes • Standards Based: DOCSIS 1.0 qualified CMTS with DOCSIS and EuroDOCSIS models available
Remote Cable Access Solutions Overview
7-20
cpqrg_ch1_access_low_res.fm Page 21 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
• Flexibility in growing and upgrading network through support of two-way cable data traffic and telephony-return
• Runs Cisco IOS software
Specifications Feature
Cisco uBR7111 and uBR7114
Cisco uBR7111E and uBR7114E
Embedded Processor
MIPS RISC527/RM7000, 75 MHz Bus
MIPS RISC527/RM7000, 75 MHz Bus
Throughput of Services
50 Mbps
50 Mbps
Memory
Flash: 48 MB; Packet: 64 MB; System: 128 MB Flash: 48 MB; Packet: 64 MB; System: 128 MB System memory expandable to 256 MB System memory expandable to 256 MB
Line Card with Integrated Upconverter 1 downstream and 1 upstream (Cable Plant Interface)
1 downstream and 4 upstreams
Integrated Upconverter
DOCSIS Annex B, 6 MHz DOCSIS Annex A, 8 MHz, High level ouput: =+61dBmV, 55 to 858 MHz High level output: = +61 dBmV, 55 to 858 MHz Optimized for 64 and 256 QAM Optimized for 64 and 256 QAM
Port Adapter (WAN or backbone Interface)
Embedded dual 10/100 BaseT Ethernet (TX FE) Same as Cisco uBR7111 and uBR7114 provided Cisco IOS Release 12.1(5)ECI supports one additional PA; options include: • Ethernet-PA-FE-TX, PA-FE-TX, PA-FE-FX, PA-4E, PA-8E • Serial-PA-4T, PA-4T+, PA-8T-V35, PA-8T-232, PA-8T-21 • HSSI-PA-H, PA-2H, PA-A3-OC3MM, PA-A2-OC3SMI, PA-A3-OC3SML Cisco IOS Release 12.1(7)EC offers additional options: • PA-T3, PA-2T3, PA-E3, PA-2E3 • PA-4E1G/75, PA-4E1G/120 • PA-POS-OC3SMI
Power Options
Single; 100 to 240 VAC input voltage
Single; 100 to 240 VAC input voltage
Minimum Cisco IOS release
12.1(5)ECI minimum
12.1(7)EC minimum
For More Information See the Cisco uBR7100 series Web site: http://www.cisco.com/go/ubr7100
Cisco uBR7200 Series Universal Broadband Router The Cisco uBR7200 Series are integrated routers and cable CMTSs. The Cisco uBR7200 Series provide a single, multi-service, scalable platform giving cable companies and ISPs the ability to deliver IP data and VoIP services over DOCSIS/ EuroDOCSIS-compliant vendor equipment, including cable modems and set-top boxes. This series enables service providers to build cable network architectures that support two-way or one-way NTSC, PAL, or SECAM channel plan operations. These products also deliver a smooth migration path for cable companies and ISPs as they upgrade their cable Cisco uBR7200 Series Universal Broadband Router
7-21
CHAPTER 7 ACCESS PRODUCTS
• Reliable operation and spectrum management generates alerts if there are critical fluctuations and supports proactive resolution while system is on line
cpqrg_ch1_access_low_res.fm Page 22 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
plants or expand their broadband service offerings. Because the products are designed in conjunction with the current and emerging standards, they offer scalability, flexibility, and investment protection to service providers. Note: The Cisco uBR7200 Series also supports the WT-2750 Multipoint Broadband Wireless Solution (see 7-32).
When to Sell Sell This Product
When a Customer Needs These Features
Cisco uBR7246VXR
• • • •
Positioned for high-growth cable or fixed wireless deployments Flexible port expansion for multi-service deployment options Supports up to 10,000 subscribers per chassis with 1 Gbps back plane 4 line card slots, 2 port adapter slots, 1 I/O controller slot, 1 NPE slot and 1 clock card slot for VoIP
Cisco uBR7246
• • • •
Positioned for mid-to-large cable and fixed wireless deployments Reliable—Established as an industry standard Supports up to 7500 subscribers per chassis with 600 Mbps back plane 4 line card slots, 2 port adapter slots, 1 I/O controller and 1 NPE slot.
Key Features • Standards-based—Supports DOCSIS 1.0, DOCSIS 1.1, EuroDOCSIS and other emerging standards • Modularity allows for customized configuration per plant characteristics for optimization of topology and network bandwidth • Cisco IOS Software—Delivers proven stability and offers advanced features such as multi-protocol routing, tunneling, bandwidth management, QoS, guaranteed service levels, and service level monitoring • Ease of management and upgrades—Supports online insertion and removal of components to allow seamless upgrades of port adapters, line cards and power supplies without service interruption. Provides single, centralized point of administration for remote devices
Competitive Products • Motorola: CAS2000, DCM - 2100
• Terayon: BE2800, BE2K00
Specifications Feature
Cisco uBR7246
Cisco uBR7246VXR
Modem Cards and Number of 4 Slots
4
Supported modem cards (Cable Plant Interfaces)
uBR-MC11C; uBR-MC12C; uBR-MC14C; uBR-MC16C; uBR-MC16E; uBR-MC16S; uBR-MC28C; uBR-MC28-BNC
uBR-MC11C; uBR-MC12C; uBR-MC14C; uBR-MC16C; uBR-MC16E; uBR-MC16S
Port Adapter Slots (LAN/WAN 2 interfaces)
2
Supported PA categories
Ethernet; Fast Ethernet; Gigabit Ethernet Serial (V.35, E1-G.703/G.704, T3/E3); Serial Multi-channel T1 HSSI ATM T3/E3 ((PCI-based); ATM OC-3c (PCI-based) POS OC-3c DPT OC-12c/STM4c
Ethernet; Fast Ethernet; Serial (V.35, E1-G.703/G.704, T3/E3); Serial EIA/TIA-232; Serial X.21; Serial Multi-channel T1/E1; Serial Multi-Channel T3/E3 HSSI ATM T3/E3 ((PCI-based); ATM OC-3c (PCI-based) POS OC-3c DPT OC-12c/STM4c
Cisco uBR7200 Series Universal Broadband Router
7-22
cpqrg_ch1_access_low_res.fm Page 23 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco uBR7246
Cisco uBR7246VXR
Power Supply Shots
2
2
Power Supply Option
AC; Dual AC; DC; Dual DC
AC; Dual AC; DC; Dual DC
Input/Output (I/O) controller
uBR7200-I/O uBR7200-I/O-FE
uBR7200-I/O uBR7200-I/O-FE
I/O flash options for PCMCIA Flash memory (20MB) slots Flash disk (48 MB) Flash disk (128 MB)
Network processing engines NPE-225 (NPE)
CHAPTER 7 ACCESS PRODUCTS
Feature
Flash memory (20MB) Flash disk (48 MB) Flash disk (128 MB) NPE-400; NPE-300; NPE-225
Add-on processor memory options
SDRAM (64 MB, 128 MB) for NPE-225/NPE-300 onlySDRAM (64 MB, 128 MB) for NPE-225 only SDRAM (256 MB) for NPE-300 only
Router Bandwidth
600 Mpbs
1 Gbps
For More Information See the uBR7200 web site: http://www.cisco.com/go/ubr7200
Cisco uBR10012 Universal Broadband Router The Cisco uBR10012 Universal Broadband Router is a new class of Cable Modem Termination System (CMTS), designed to handle the volume, capacity, and complexity of large cable MSO headends or distribution hubs. It combines the revenue-generating features and stability of the market-leading uBR7200 series with an architecture that is optimized for aggregation and virtually limitless future growth. The uBR10012 goes beyond the traditional “carrier class” definition, to deliver the highest level of service availability and capacity of any production CMTS available today. It employs a mix of distributed, centralized, and parallel processing, together with Cisco-patented Parallel eXpress Forwarding (PXF) technology to enable consistently high, real-world performance.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco uBR10012
• High-end throughput, capacity, and service handling for a mix of IP data, voice, and video services over cable, requiring support for a wide variety of applications, media, session types, subscriber profiles, and access devices • Support for advanced feature sets, varying QoS requirements, service-level differentiations, and transport strategies (MPEG, IP, multicast, unicast, broadcast) that include implementing flow control to various cable CPE devices
Key Features • Highest-capacity CMTS termination that leverages the proven Cisco uBR7200 Series product and industry-standard Cisco IOS software • Multiservice support, optimized to provide high throughput and accelerated processing using PXF technology; exceptional throughput on each connection in the chassis is achieved Cisco uBR10012 Universal Broadband Router
7-23
cpqrg_ch1_access_low_res.fm Page 24 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
• Standards-based design, support includes DOCSIS 1.0 and DOCSIS 1.1 • Reliability—Designed to eliminate single points of failure and allow technicians to swap out cards online; architected to provide redundancy throughout the system that includes redundant processing engines, bus interconnects, and power supplies; advanced software fail-over mechanisms such as Hot-Standby CMTS to CMTS protocol (HCCP) • Secure, scalable choices protect your investment and ensure current and future business growth can be accommodated; the architecture supports planned system and network expansion, including scaling IP services forwarding capacity, increasing connection speeds and densities, and extensive route scaling techniques
Competitive Products • ADC/BAS: Cuda 12000 • RiverDelta: BSR 64000
• Motorola: CAS 2000 • Terayon/RiverStone: RS 8x00
Specifications Feature
Cisco uBR10012
Modular Slots
8 slots for cable interfaces; each cable interface supports 2 downstreams and 8 upstreams 4 slots for WAN interface modules 2 slots for PRE modules 2 slots for Timing Communication and Control Plus (TCC+) modules
Supported Cards
Cisco MCxx cable interface line cards Timing, Communications, and Control Plus (TCC+) card Gigabit Ethernet (GE) network uplink card (Part Number: ESR-1GE) OC-12 Packet Over SONET (POS) network uplink card (Part Number: ESR-10C-12/P-SMI )
Processor Type
Parallel express Forwarding (PXF)
Flash Memory
48 MB (default); 128 MB (maximum)
DRAM Memory
512 DRAM (default)
Software Supported
Minimum software requirement: Cisco IOS Release 12.2(1)XF
Power Supply
DC
Hot-Swappable
Yes
Backplane Capacity
51.2 Gbps
Physical Dimensions (H x W x D)
Height: 31.25 in. (79.4 cm)—18 Rack Units (RU) Width: 17.2 in. (43.7 cm) Depth: 22.75 in. (57.8) Mounting: 19 in. rack mountable (front or rear), 2 units per 7 ft. rack Note: Mounting in 23 in. racks is possible with optional third-party hardware
Weight
Weight: 235 lb (106.6 kg) fully configured chassis
For More Information See the Cisco uBR10012 Web site: http://www.cisco.com/ubr10012
Cisco uBR10012 Universal Broadband Router
7-24
cpqrg_ch1_access_low_res.fm Page 25 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cable Remote Access—Customer Premise Equipment (CPE)
The Cisco uBR900 Series Cable Access Routers are designed to provide commercial services for cable operators, allowing them to expand their broadband service offerings. The Cisco uBR925, an integrated DOCSIS Cable Modem and Cisco IOS router, provides an easy-to-manage solution for telecommuters and small offices. It offers Voice-over-IP (VoIP), Virtual Private Network (VPN), and router functionality in a one-box solution. The Cisco uBR905 is a data-only cable access router that is also DOCSIS 1.0 certified. Both models offer hardware-accelerated IPSec VPN support. Key Features for the Cisco uBR900 Series • Integrated high-speed cable modem, operates with any DOCSIS 1.0 CMTS • Integrated Cisco IOS router, cable modem, and four-port Ethernet hub provides advanced networking capabilities and investment protection • Cisco IOS-based, simplifies training and leverages existing knowledge
Cisco CVA120 Series Cable Voice Adapters The Cisco CVA120 Series Cable Voice Adapters are residential voice-enabled cable modems that provide high-speed data and voice services to small office/home office (SOHO) and residences over IP. Cisco models include the CVA122 DOCSIS version and the CVA122E EuroDOCSIS model. The CVA120 series delivers data at broadband speeds. The supported telephony features allow the Multiple Service Operators (MSO) to provide voice services using a single coaxial cable connection. Key Features for the Cisco CVA120 • Supports value-added data services included separately routed Ethernet & USB • Supports Cisco Easy IP for NAT/PAT, multi-NAT, and DHCP server • Toll-quality voice (VoIP) enabled with H.323 and MGCP support and broad codec support including G.711, G.723.1, G.726, G.728, G.729, G.729a • Cisco IOS operating environment • Easy set-up and installation with USB port for “plug and play” When to Sell Sell This Product
When a Customer Needs These Features
Cisco uBR905 Cable Access Router
• Requires data-only broadband services (or voice separately via Ethernet) • High-speed, secure remote tunneling via hardware accelerated IPSec VPN
Cable Remote Access—Customer Premise Equipment (CPE)
7-25
CHAPTER 7 ACCESS PRODUCTS
Cisco uBR900 Series Cable Access Routers
cpqrg_ch1_access_low_res.fm Page 26 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Sell This Product
When a Customer Needs These Features
Cisco uBR925 Cable Access Router
• Supports two voice (VoIP) connections via RJ-11 ports • Provides data broadband services, router functionality, and VPN support
Cisco CVA122
• Combined high-speed data and voice service for residential or small office applications • Supports Class features like caller ID, distinctive ringing, call back, 3-way calling, and call forwarding
Specifications Feature
Cisco uBR905
Cisco uBR925
Cisco CVA122
Ports
4-port 10Base-T Ethernet hub 1 port USB 1 port Console 1 port CATV (Female F Connector)
4-port 10Base-T Ethernet hub 1 port USB 2 ports RJ-11 (telephone) 1 port Console 1 port CATV 1 port Telco backup connection
1-port 10Base-T Ethernet hub 1 port USB 2 ports RJ-11 (telephone) 1 port CATV
Routing Features
NAT/PAT, DHCP Server
Same as uBR905
Same as uBR905
Security Features
56 Bit IPSec 3DES IPSec optional IPSec Harware Acceleration Firewall optional
Same as uBR905
None
Voice Support
No
Yes
Yes
UPS Battery Backup
No
No
Yes
For More Information See the uBR900 Web site: http://www.cisco.com/go/ubr900 See the CVA120 series Web site: http://www.cisco.com/go/cva120
Sample Cable Solution Overview—Residential Video, Internet, and Voice Services
Cisco CVA120 Series Cable Voice Adapters
7-26
cpqrg_ch1_access_low_res.fm Page 27 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
The Cisco 6920 RateMUX is a specialized multiplexing device that optimizes MPEG transport streams to distribute multiple video, audio, and data streams over a cable plant to digital set-top boxes (STBs). It delivers a real-time, bandwidth management solution that allows cable, satellite, and broadcast operators to add value to their programming and increase revenue. It allows multiple programs to be bundled into one optimized, multiplexed output stream, blending digital programming from a variety of sources-including satellite-based services, local content, and movie video servers—to create custom lineups.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco RM6920 RateMUX
• Re-package multiple MPEG-2 transport streams into a new multi-program single multiplex transport stream for transmission to subscribers • To maximize audio, video, and data signal throughput by dynamic rate conversion and bit stream manipulation on encoded MPEG-2 streams • Perform local ad insertion or content insertion when moving from 64 to 256 QAM
Key Features • Transport grooming allows customization of digital program lineups • Transration; supports significant bit rate reduction on individual input programs • Statistical multiplexing optimizes output bandwidth • Packet Identifier (PID) filtering and remapping accepts programming from multiple sources
Competitive Products • Terayon: CherryPicker
• Scientific Atlanta: PowerVu Plus™ BitMizer
Specifications Feature
Cisco RM6920
Digital Video Format MPEG2 Main Profile at Main Level Bit Rate less than or equal to 15 Mbps for transcoding; 20 Mbps for pass through VBR or CBR systems
Video Resolution
Vertical: 480, 240 (NTSC), and 576, 288 (PAL); Horizontal: 704, 544, 352
Video Aspects Ratios 4:3 or 16:9 Digital audio formats Musicam, Dolby AC3 Ethernet Port
10BaseT; TCP/IP
Input Interface
Number of inputs: Up to 15 discrete transport streams Interface: DHEI, DVB-ASI; Information rate: 40 Mbps for DHEI, 216 Mbps for DVB-ASI
Output Interface
Number of outputs: Up to 3 Interface: DHEI, DVB-ASI either 64 or 256 QAM; Information rate: 40 Mbps for DHEI, 54 Mbps for DVB-ASI
For More Information See the 6920 RateMUX web site: http://www.cisco.com/go/6900rm Cisco 6920 RateMUX Statistical Multiplexer
7-27
CHAPTER 7 ACCESS PRODUCTS
Cisco 6920 RateMUX Statistical Multiplexer
cpqrg_ch1_access_low_res.fm Page 28 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Remote Cable Access—Network Management Products Cisco Cable Manager 2.0 Cisco Cable Manager 2.0 is a client/server application that helps cable service providers deploy, maintain, monitor, and troubleshoot cable equipment on an HFC network. The product integrates the CiscoView application, graphically representing the Cisco uBR7200, Cisco uBR900, Cisco CVA122, and other DOCSIS compliant cable modems.
Cisco Troubleshooter 1.0 The Cisco Cable Troubleshooter 1.0 provides an efficient tool to help network operations center personnel or field technicians detect, diagnose and isolate problems between the cable plant and connected RF CPE devices. The product allows technicians to characterize upstream and downstream trouble patterns and quickly identify “flapping” CPE devices experiencing persistent connectivity problems. Operators can quickly discern an cable modem or set-top box having problems; determine which amplifier or feeder line is faulty; distinguish an upstream from downstream path problem; and isolate an ingress noise impairment from a plant equipment problem.
Cisco Subscriber Registration Center (CSRC) Cisco Subscriber Registration Center (CSRC) supports provisioning and intelligent device management for high-speed data, residential voice over IP (VoIP), DOCSIS cable modems, and fixed wireless devices. It is designed for streamlined provisioning of subscribers supporting both pre- and self-provisioning and workflows.
Cisco DOCSIS CPE Configurator Cisco DOCSIS CPE Configurator is a GUI-based tool designed to collect information needed to generate and download configuration files for DOCSIS or EuroDOCSIS cable modems and set-top boxes. There are two versions of the tool: a free, web-based version accessible via Cisco Connected Online (CCO), and a stand-alone Java-based desktop version. Cisco DOCSIS CPE Configuator enables point and click configuration of CPE values for RF, class of service, vendor information, SNMP parameters, BPI, TFTP, telco-return attributes, and CPE data. For More Information See the Cable Manager 2.0 Web site: http://www.cisco.com/go/cablemgr See the Troubleshooter 1.0 Web site: http://www.cisco.com/go/troubleshooter See the Subscriber Registration Center Web site: http://www.cisco.com/go/csrc See the DOCSIS CPE Web site: http://www.cisco.com/go/docsis
Remote Cable Access—Network Management Products
7-28
cpqrg_ch1_access_low_res.fm Page 29 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Digital Subscriber Line (DSL) Access Solutions CHAPTER 7 ACCESS PRODUCTS
Sample DSL Solution Overview
Cisco 6000 IP DSL Series Switches The Cisco 6000 IP DSL switch family is the evolution of current Cisco smart Digital Subscriber Line Access Multiplexers (DSLAM) that support the most comprehensive IP+ATM feature set with common multi-DSL technologies for central offices (CO), remote terminals (RT), and Multi-Dwelling Units (MDU). This series supports Multiprotocol Label Switching/virtual private networking (MPLS/VPN), multicasting, and IP routing with quality of service (QoS).
Cisco 6015 IP DSL Switch1 The Cisco 6015 IP DSL Switch extends the DSL reach beyond the CO to the outside plant (OSP) and MDU. It is a companion to the Cisco 6160 and 6260 products, with an ideal form factor for smaller-scale DSL deployments, but with the same robust IP+ATM features of the larger products. The Cisco 6015 is designed for commercial deployments in incumbent local exchange carrier (ILEC); international post, telephone, and telegraph (PTT); and competitive local exchange carrier (CLEC) networks, as well as Multi-Tenant/Dwelling Units (MxU). 1. For other Cisco MxU solutions, see Long Range Ethernet Solutions (page 7-38)
Digital Subscriber Line (DSL) Access Solutions
7-29
cpqrg_ch1_access_low_res.fm Page 30 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco 6160 IP DSL Switch (targeted for use in North America) The Cisco 6160 is a 32-slot, multiport line-card architecture that supports industry-standard asymmetric digital subscriber line (ADSL), ISDN over digital subscriber line (IDSL), and symmetric digital subscriber line (SDSL) line technologies. Targeted at North American central-office environments, the Cisco 6160 is fully compliant with NEBS, ANSI, and ATM carrier-class network-element standards. Network transmission connections include DS3, 8xT1 inverse multiplexing over ATM (IMA), and OC-3c single mode/multimode. Up to 256 ports per chassis can be provisioned with ADSL (DMT), SDSL, G.shdsl, and IDSL. A variety of configuration and cabling options are available to support a mix of xDSL services within a common chassis. For “above voice-band” or “line sharing” ADSL applications, the Cisco 6160 can also be used with various third-party Plain Old Telephone Service (POTS) splitters recommended by Cisco.
Cisco 6260 IP DSL Switch (targeted for International deployment) Built for rapid, large-scale deployment of DSL services, the Cisco 6260 is designed for ILECs, competitive LECs (CLECs), and MDU service providers around the world who need next-generation DSL service solutions today. The Cisco 6260 IP DSL switch enables the most comprehensive set of IP+ATM capabilities with common multi-DSL technologies. The Cisco 6260 switch is IP-ready and supports an evolution path for managed services using MPLS, VPN, multicasting, IP routing and QoS. The Cisco 6260 switch supports both asymmetrical and symmetrical DSL (ADSL and SHDSL) technologies. For More Information See the 6000 Series IP DSL Switch Web site: http://www.cisco.com/go/6000ipdsl
DSL Remote Access—Customer Premise Equipment (CPE) Cisco offers the industry's broadest array of business-class DSL (G.shdsl and ADSL) CPE solutions, from Enterprise to branch office, to Small Office/Home Office (SOHO) applications. Cisco's CPE solutions offer the choice of key features including Firewall, VPN, and Voice-over DSL support. And, Cisco's industry leading IOS-based capabilities enable QoS, policy management, and standardized set-up and configuration. Cisco CPE Products include: • Cisco SOHO 77 ADSL Routers (page 1-7) • Cisco 800 Series Routers (page 1-10) • G.SHDSL WAN Interface Cards (WICs) for 1700, 2600, 3600 Series (see Chapter 1—Routers) • Cisco IAD 2400 Series (w/G.SHDSL) (page 4-16)
DSL Remote Access—Customer Premise Equipment (CPE)
7-30
cpqrg_ch1_access_low_res.fm Page 31 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Broadband Services Aggregation When ordered with the Cisco IOS 7200 Series Broadband User Services License (part number FR-BUS72), the 7200 delivers scaled PPP, RBE, and L2TP sessions and tunnels in addition to rich IP services. It enables service providers to provision broadband Internet access and supports all of the popular access technologies deployed today, including DSL, Cable, Wireless, and Dial Access. It is ideal for medium-density applications (between 4000 and 8000 Ethernet-bridged, PPPoA, PPPoE in a single chassis). The 7200 is a modular platform with a choice of processing engines and a wide variety of WAN and LAN port adapters, including T1/E1, DS3, OC-3, Fast Ethernet, and Gigabit Ethernet. See http://www.cisco.com/go/7200aggregation and page 1-30 for more information on the 7200 series.
Cisco 7400 Series When ordered as a part number 7401ASR-BB, the 7400 series provides high-performance broadband services aggregation like the 7200, but in a low-power one rack unit (1 RU) form factor. It offers one port adapter (PA) slot supporting over 40 standard 7200 series PAs, including T1/E1, DS3, OC-3, Fast Ethernet, and Gigabit Ethernet; making it ideal for small- and medium-density applications. See page 1-34 for more information on the 7400 series.
Cisco 6400 Series Carrier-Class Broadband Aggregator The Cisco 6400 is designed for use in high-availability environments such as service provider central offices, and corporate premises; and aggregates access media (DSL, cable, wireless, and dial) to serve as the intelligent equal access point, allowing multiple operating companies and service providers access to end users. It includes switch, router, and line card redundancy. The Cisco 6400 is a high-performance service gateway that enables the delivery of network services, VPNs, and voice- and entertainment-driven traffic over any access media. ATM interfaces connect the Cisco 6400 to dial access servers, DSLAMs, and Cisco IP DSL Switches; ATM and packet interfaces connect to the network core. Key Features • Session scalability and modular design—The Cisco 6400 represents a quantum leap in session scalability, capable of scaling from 2000 subscribers in its entry level configuration to 96,000 subscribers in a full configuration. • Routing and VPN scalability—Using the Cisco 6400, service providers can simultaneously route end-user traffic over secure, independent pathways exceeding 1000 different domains or end destinations, with an aggregate throughput of over 2.4 Gbps forwarding capacity for handling even the most bandwidth-intensive broadband traffic. For More Information See the 6400 series Web site: http://www.cisco.com/go/6400 Broadband Services Aggregation
7-31
CHAPTER 7 ACCESS PRODUCTS
Cisco 7200 VXR
cpqrg_ch1_access_low_res.fm Page 32 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco WT-2750 Multipoint Broadband Wireless System The WT-2750 Multipoint Broadband Wireless System delivers an alternative “last-mile access” solution for the service providers through broadband wireless technology, enabling them to directly compete with, or complement, traditional broadband access solutions such as DSL and Cable. The Cisco WT-2750 Point-to-Multipoint (P2MP) Broadband Wireless System is the industry's first service provider-class solution for fixed wireless communications. It delivers uncompromised performance, wireline-grade link availability, end-to-end QoS, security, provisioning, and management support. Integrated with Cisco uBR7200 and Cisco 2600/3600 series router platforms, the Cisco WT-2750 extends the Cisco IOS end-to-end network solution and service over wireless connections. Unlike first-generation microwave systems, Cisco's patented Vector Orthogonal Frequency Division Multiplexing (VOFDM™) technology leverages multipath to ensure a robust, fiber-quality network connection over wireless with or without Line-of-Sight (LOS). The system also greatly reduces installation time and overall cost of ownership for service providers.
When to Sell Sell This Product
When a Customer Needs These Features
WT-2750
• Service Provider customers who need alternative last mile access infrastructure • New operators who need to quickly deploy lower-cost alternative broadband services • Enterprise/Campus customers who need to extend MAN networks without recurring access fees
Key Features • New service provider-class broadband wireless solution leveraging industry-proven Cisco platforms and solutions –
Fully integrated with Cisco's uBR7200 universal broadband router family and Cisco's 2600/3600 modular access router family
–
Wide range of WAN and LAN connectivity options through port adapters, network modules and WIC interface cards
–
Delivers up to 22.2 Mbps downstream and 18 Mbps upstream performance per sector with PAT/NAT support
• Unparalleled scalability, security, reliability and manageability –
Up to 4,096 active users supported per headend router
–
Combines leading DOCSIS QoS solution with Cisco's Internet-proven, end-to-end, multiservice network design
–
Support for VPNs based on PPPoE, L2TP, GRE, or MPLS; hardware-assisted 56-bit DES and available Triple-DES encryption support; integrated Cisco IOS Firewall feature set
Cisco WT-2750 Multipoint Broadband Wireless System
7-32
cpqrg_ch1_access_low_res.fm Page 33 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Competitive Products • Vyyo: Broadband Wireless Access System
Specifications Feature
WT-2750
Frequency of Operation
MMDS/MDS Headend and Customer Premise Equipment (CPE): Rx & Tx=2.5 to 2.7GHz & Rx=2.150 to 2.162GHz U-NII Headend and CPE: Rx & Tx = 5.725 to 5.825 GHz
Bandwidth Channelization Configurable to 1.5, 3.0, or 6.0 MHz. Both U/S and D/S are configured independently. Modulation : Modulation Efficiency, Roll-off factor
VOFDM and 64 QAM 3.7 bits per Hz-US and 3 bits per Hz-DS. Roll-off factor does not apply
Channel Data Rate
Up to 22.2 Mbps Downstream; Up to 18 Mbps Upstream
Access Method
Downstream: Broadcast; Upstream: TDMA
Duplex Method
Frequency Division Duplexing
Management Protocols
SNMP,TFTP,DHCP,Bootp
QoS
Via DOCSIS 1.0 +
Interleaving
Upstream: Bit interleaver. Block Type with parameters of 6 X 18 for QAM-64 Downstream: Bit interleaver and convolutional Byte interleaver with 11 step variable depth from 4 to 84
Coding & Forward Error Correction
Reed Solomon and Viterbi DeCoder
Security
Baseline Privacy with triple DES RSA key exchange IOS firewall features
Encryption
DES 56 bit HW Encryption and Decryption
Operating Levels Range
CPEs are designed to work within 200 ft of HE to maximum range determined by site path loss
Minimum Receiver Sensitivity @ BER 1.0E-06
-80 dBm for HE to CPE in a 6 MHz Channel @ 22.4 Mbps
Required IOS Level
12.1(5) XM or later
Selected Part Numbers and Ordering Information1 WT-2750 Multipoint Broadband Wireless System1 UBR-MCW-MDA= NM-WMDA= UBR-WMF4A= CISCO951
Multipoint Broadband Wireless Headend Line Card for the Cisco uBR7200 Series Multipoint Broadband Wireless Subscriber Network Module for the Cisco 2600 and 3600 Series Router Quad Power Feed Panel for WT-2750 Multipoint System Cisco 951 Multipoint Broadband Wireless Router
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the Broadband Wireless Web site: http://www.cisco.com/go/broadbandwireless
Cisco WT-2750 Multipoint Broadband Wireless System
7-33
CHAPTER 7 ACCESS PRODUCTS
• Hybrid Networks: Wireless Broadband Access System • Adaptive Broadband: AB Access System
cpqrg_ch1_access_low_res.fm Page 34 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
ATM Multiservice WAN Switching Cisco BPX 8600 Series—IP+ATM Multiservice Switches The Cisco BPX 8600 series is standards-based ATM switch with advanced IP and ATM capabilities. Designed to meet the demanding, high-traffic needs of a public service provider or large private enterprise, the BPX switch delivers high-performance ATM switching, multiservice adaptation and aggregation for all types of user traffic. Proven in the world's largest ATM and Frame Relay networks, the BPX 8600 enables service providers and large enterprises to meet skyrocketing network demands. The Cisco BPX 8600 series switch offers up to 20 Gbps of high-throughput switching for multiple traffic types data, voice, and video and supports a wide range of interfaces, from Frame Relay to full broadband subscriber interfaces, up to 622 Mbps. You can offer multiple services for LAN, X.25, SNA, IP, Frame Relay, and ATM traffic from a single BPX platform. The Cisco BPX 8600 series supports multiprotocol label switching (MPLS) today, and this functionality can be easily added to any BPX switch already installed in the field.
For More Information See the Cisco BPX Web site: http://www.cisco.com/go/bpx
Sample ATM Access Solution Overview—Integrated Voice and Data
ATM Multiservice WAN Switching
7-34
cpqrg_ch1_access_low_res.fm Page 35 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
CHAPTER 7 ACCESS PRODUCTS
Cisco MGX 8850 IP+ATM Multiservice Switch The Cisco MGX 8850 IP+ATM Multiservice Switch enables delivery of a complete portfolio of service offerings while scaling from DS0 to OC-48c/STM-16 speeds. It enables service providers to be first to market with the new high-margin voice and data services while maintaining existing services. The MGX 8850 universal chassis provides a unified IP+ATM architecture that delivers a complete portfolio of differentiated services —from circuit emulation to IP VPNs—all with a single chassis, to enable service providers to easily add new services. Note: The Cisco MGX 8850 can function in two different modes of operation: • PXM-1 configuration—Operates as a stand-alone device for narrowband services, or as an integrated edge concentrator for the Cisco BPX 8600 series or the Cisco MGX 8850 PXM-45 • PXM-45 configuration—Serves as a broadband edge switch and includes the 45 Gbps switch card and broadband ATM modules
Key Features • Flexible IP+ATM multiservice platform • Highly scalable—from 1.2 to 45 Gbps of non-blocking throughput in single chassis • Highest reliability, availability, and serviceability in the industry • IP VPNs using Cisco IOS software-based Multiprotocol Label Switching (MPLS) • Market-leading Frame Relay capabilities, with price-per-port leadership and advanced QoS • High-density Point-to-Point protocol (PPP) for Internet access and aggregation • Full-featured narrowband ATM for managed data, voice, and video services; high-density broadband ATM for wholesale ATM services • Circuit Emulation for Private Line replacement
For More Information See the Cisco MGX 8850 Web site: http://www.cisco.com/go/mgx8850
Cisco MGX 8850 IP+ATM Multiservice Switch
7-35
cpqrg_ch1_access_low_res.fm Page 36 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco MGX 8200 Series Cisco MGX 8220 Edge Concentrator A cost-effective narrowband multiservice solution for low to mid-band ATM and Frame Relay aggregation with QoS management features, the MGX 8220 provides aggregation of a variety of services to a standard ATM User-Network Interface (UNI) or Network-to-Network Interface (NNI). It can be used as a standalone unit for aggregating traffic for an ATM network, or as an adjunct shelf for Cisco ATM switches. The MGX 8220 provides a high density of ports per platform for delivering lowto medium-band Frame Relay, circuit emulation, ATM, ISDN, and wireless services for transport over the network backbone.
Cisco MGX 8230 Edge Concentrator The Cisco MGX 8230 Edge Concentrator is a small footprint multiservice gateway specifically designed for service providers with space and power constraints. It offers cost-effective narrowband, voice, and IP services, and acts as a feeder shelf to Cisco BPX 8600 series, MGX 8850 and Cisco IGX 8400 series multiservice switches; providing a complete Cisco solution for carrier services.
Cisco MGX 8250 Edge Concentrator The Cisco MGX 8250 is a high-density edge concentrator designed for service providers needing flexibility for aggregation of IP, voice, Frame Relay, circuit emulation, and ATM services. An IP+ATM narrowband edge concentrator, the MGX 8250 can serve as a stand-alone edge concentrator or as a feeder node for the Cisco BPX 8600 series and MGX 8850 switches. The MGX 8250 Edge Concentrator offers up to 1.2 Gbps of IP + ATM switching capacity.
For More Information See the Cisco MGX 8200 series Web site: http://www.cisco.com/go/mgx8200
Cisco MGX 8200 Series
7-36
cpqrg_ch1_access_low_res.fm Page 37 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Efficient bandwidth utilization, intelligent QoS management features, and carrier-class reliability make the IGX 8400 series switch the ideal choice for meeting unique Wide-Area Networking (WAN) needs. This series provides the IP+ATM backbone required to deliver data, voice, fax, and video services with guaranteed quality of service (QoS). The IGX 8400 series switch connects to public services for reduced leased-line costs by maximizing the use of these WAN links. Available with 8, 16, or 32 slots, the IGX 8400 series switches offers high flexibility to meet a wide range of Enterprise and Service Provider needs. Tight integration with the broad range of Cisco access products enables you to efficiently and cost-effectively run backbone-to-branch data, voice, fax, and video services between premises. By integrating IOS technology, the Cisco IGX 8400 series switch helps deliver a seamless migration path to technologies such as VoIP and MPLS.
For More Information See the Cisco IGX 8400 Web site: http://www.cisco.com/go/igx
Cisco IGX 8400 Series Multiservice WAN Switch
7-37
CHAPTER 7 ACCESS PRODUCTS
Cisco IGX 8400 Series Multiservice WAN Switch
cpqrg_ch1_access_low_res.fm Page 38 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco Long Reach Ethernet Solution The Cisco Long-Reach Ethernet (LRE) networking solution delivers cost-effective, high-performance broadband access to multitenant/dwelling units (MxU) such as hotels, residential units, multitenant office buildings, shopping malls; and enterprise campus environments such as manufacturing, educational campuses, and medical facilities. Cisco LRE technology dramatically extends Ethernet over existing Category 1/2/3 wiring at speeds from 5 to 15 Mbps (full duplex) and distances up to 5,000 feet. This technology delivers broadband service over the same lines as standard telephone (POTS), digital telephone, and ISDN circuits. In addition, Cisco LRE supports modes compatible with asymmetric digital subscriber line (ADSL), allowing service providers to provision LRE to buildings where broadband services already exist. This solution also provides multicast, Layer 2 quality of service (QoS), security, and Web-based Cisco Switch Clustering network management. The Cisco LRE solution includes Cisco Catalyst 2900 LRE XL switches, the Cisco 575 LRE Customer Premise Equipment (CPE) device, and the Cisco LRE 48 POTS Splitter.
Catalyst 2900 LRE XL Desktop Switches Cisco Catalyst 2900 LRE XL switches are based on the Cisco market-leading Catalyst 2900 Series XL 3.2-Gbps switch architecture, and include all Enterprise-class features available in Catalyst 2900 XL switches. Now, service providers can address a broad range of wiring environments beyond Category 5 cabling. This gives users a low-cost, end-to-end solution and eliminates costly training. The Catalyst 2900 LRE XL switches are one rack-unit (1RU) high, 13-inches deep, and can be either mounted on a wall or placed on a rack. The switches deliver dedicated bandwidth per port at rates up to 15 Mbps. LRE transmissions coexist with POTS and ISDN, and can be compatible with ADSL traffic in the same building. The switches can be configured on a per-switch basis to support the following modes: • 5 Mbps symmetrical rate (up to 5,000-feet distance) • 10 Mbps symmetrical rate (up to 4,000 feet) • 15 Mbps symmetrical rate (up to 3,500 feet) The Catalyst 2900 LRE XL switches provide fast and easy connectivity into building patch panels with one RJ-21 telco connector. The 10/100 Ethernet ports can be used to connect servers, daisy-chain multiple LRE switches, or uplink to a Cisco Catalyst 3500 XL, 2900 XL, or 2948G-L3 10/100 Ethernet switch. These connectivity options provide multiple price/performance options to meet building and budget requirements.
Cisco Long Reach Ethernet Solution
7-38
cpqrg_ch1_access_low_res.fm Page 39 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Cisco 575 LRE CPE Device
Cisco LRE 48 POTS Splitter The Cisco LRE 48 POTS Splitter is a high-density, low-cost device that is ideal for building deployments where the PBX system is on-site and POTS traffic must coexist over the same copper wiring as LRE traffic. Unlike “splitterless” building broadband network solutions, the Cisco LRE 48 POTS Splitter ships as a separate, compact form factor to ensure that POTS service is separate, and never compromised by LRE switch reconfigurations or downtime. The Cisco LRE 48 POTS Splitter supports 48 ports in a 1RU form factor. Each splitter has six RJ-21 connectors-two each for connectivity to the patch panel, the LRE switch(es), and the on-site PBX system. When to Sell Sell This Product
When a Customer Needs These Features
Catalyst 2924 LRE XL
• 24 Long-Reach Ethernet ports and four 10/100 Ethernet ports for higher density deployments • Ethernet over existing Category 1/2/3 wiring at speeds from 5 to 15 Mbps (full duplex) and distances up to 5,000 feet
Catalyst 2912 LRE XL
• 12 LRE ports and four 10/100 Ethernet ports • Ethernet over existing Category 1/2/3 wiring at speeds from 5 to 15 Mbps (full duplex) and distances up to 5,000 feet
Cisco 575 LRE CPE Device • A device to bridge LRE and Ethernet connections • Support for POTS phone and high-speed data connections
Cisco LRE 48 POTS Splitter
• Supports 48 LRE ports with 6 RJ-21 connectors • Required only where LRE traffic must co-exist with POTS traffic on same wire
Key Features • Quality of Service—802.1p QoS support provides high and low priority queuing on a per-port basis. Layer 3 QoS support-including DiffServe and application-based queuing—when aggregated by a Layer 3 switch. • Scalability—Up to 15-Mbps symmetric performance over single-pair wiring; Fast EtherChannel port aggregation. • Security—802.1Q port-based virtual local-area network (VLAN) support; Cisco private VLAN access, assuring port security without requiring a VLAN per port; Access control list (ACL) security when a LRE switch is aggregated by a Cisco Layer 3 10/100 Ethernet switch.
Cisco Long Reach Ethernet Solution
7-39
CHAPTER 7 ACCESS PRODUCTS
Each LRE port is terminated in the room with the Cisco 575 LRE Customer Premise Equipment (CPE) device. This compact device bridges LRE and Ethernet, and provides one RJ-45 Ethernet connection and two RJ-11 connectors—one for the wall and one for a telephone. The Cisco 575 LRE CPE device can be mounted on or under a desk, or on a wall. It ships with a mount lock-in mechanism and clip-on Ethernet cable guard to discourage theft, as well as an Ethernet cord. It supports voice (Plain Old Telephone Service—POTS) traffic-including ISDN or digital phones-that coexists over the same LRE line by splitting LRE and POTS traffic at the CPE device. A POTS Splitter is required for connectivity to the PBX and LRE switch stack.
cpqrg_ch1_access_low_res.fm Page 40 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
• Network Management—Cisco Switch Clustering technology and the advanced, Web-based Cisco Cluster Management Suite (CMS) software deliver easy-to-use configuration and ongoing monitoring and management of up to 16 switches. This software is embedded in the switches and delivers remote management of clustered switches and connected CPE devices through a single IP address. Competitive Products • Elastic Networks: BitStorm solution (Etherloop) • Tut: Expresso (HPNA)
• Extreme: Alpine FM-8Vi (Ethernet over VDSL)
Specifications Feature
Cisco 2924 LRE XL
Cisco 2912 LRE XL
Fixed Ports
24 Long-Reach Ethernet ports and four 10/100 Ethernet ports
12 Long-Reach Ethernet ports and four 10/100 Ethernet ports
Backplane
5-Gbps
Same as Cisco 2924 LRE XL
VLAN Maximum
250 port based VLANs or ISL/802.1Q trunks
Same as Cisco 2924 LRE XL
Management Capabilities
SNMP, Telnet, RMON, CWSI, CLI-based Same as Cisco 2924 LRE XL out-of-band, embedded Cisco Cluster Management Suite (CMS), Web-based interface
Processors
Cisco designed ASICs, Power PC 403C
Memory
4 MB (Flash); 8 MB (CPU DRAM)
Same as Cisco 2924 LRE XL
Embedded RMON
History, Events, Alarms, Statistics
Same as Cisco 2924 LRE XL
Dimensons (HxWxD)
1.665 x 13.25 x 17.4 in.
Same as Cisco 2924 LRE XL
Same as Cisco 2924 LRE XL
Selected Part Numbers and Ordering Information1 Catalyst 2900 LRE XL Desktop Switches1 WS-C2924-LRE-XL WS-C2912-LRE-XL
Catalyst 2924 LRE XL switch: 24-port LRE + 4-port 10/100 Catalyst 2912 LRE XL switch: 12-port LRE + 4-port 10/100
Cisco 575 LRE CPE Device CISCO575-LRE-6P CISCO575-LRE-24P
Cisco 575 LRE CPE device (6 pack): 1-port Ethernet + 2 RJ-11 connectors Cisco 575 LRE CPE device (24 pack): 1-port Ethernet + 2 RJ-11 connectors
Cisco LRE 48 POTS Splitter PS-1M-LRE-48
Cisco LRE 48 POTS Splitter: 48 ports
1. This is only a small subset of all parts available via URL listed under “For More Information”. Some parts have restricted access or are not available through distribution channels. Resellers: For latest part number and pricing info, see the Distribution Product Reference Guide at: http://www.cisco.com/dprg (limited country availability).
For More Information See the LRE Web site: http://www.cisco.com/go/lre
Cisco Building Broadband Services Manager (BBSM) Cisco BBSM is a server system that enables automated online activation, limited free access, tiered service levels, integrated billing, and plug-and-play access to help service providers penetrate building broadband markets. It is the industry's most widely deployed in-building service platform.
Cisco Building Broadband Services Manager (BBSM)
7-40
cpqrg_ch1_access_low_res.fm Page 41 Friday, August 17, 2001 11:12 AM
Chapter 7
Access Products
Note: At this printing, the purchase of BBSM is restricted to Advanced Technology Partners (ATP). Contact your Cisco account manager for more information on the ATP program.
For More Information See the BBSM Web site: http://www.cisco.com/go/bbsm
Sample LRE Solution Overview—Broadband Internet Access for MxU
Sample LRE Solution Overview—Broadband Internet Access for MxU
7-41
CHAPTER 7 ACCESS PRODUCTS
Cisco BBSM is a flexible platform that is compatible with any form of broadband technology, including Ethernet, Long-Reach Ethernet, digital subscriber line (DSL), cable, wireless, or fiber.
CH A P T E R
8
Optical Transport
Product
Features
Page
Industry-leading optical transport platform Cisco ONS 15454 Metro Optical Transport Platform • Aggregates DS1, DS3, STS-1, OC-3, OC-12, OC-48
8-2
• Supports OC-192 and mulitwavelength DWDM optics • Wide range of data interfaces, including Ethernet, ATM, and video
Cisco ONS 15327 Metro Edge Optical Transport Platform
Optical transport platform based on ONS 15454 technology • Highly cost-efficient for delivering multiservices to the metro edge • Aggregates and switches TDM, Ethernet, and ATM services • Very small footprint
Cisco ONS 15200—Optical Service-provider class DWDM solution Metro DWDM Series • Modular architecture
8-2
8-3
• High transmission efficiency for more channels and nodes, and greater distances • Very small footprint
Metro 1500
Enterprise class compact, modular DWDM platform • Fault tolerant hot-swappable modules • IBM ESCON/FICON Channel connectivity • Fiber Channel Storage Area Network applications • Fiber Channel/FICON Network Attached Storage applications
8-4
Sample Metro Optical Transport Solution Overview— Delivering Multiservices to the Edge
Optical Transport Products at a Glance
8-1
CHAPTER 8 OPTICAL TRANSPORT
Optical Transport Products at a Glance
Chapter 8
Optical Transport
Cisco ONS 15454 and 15327 Metro Optical Transport Platforms The Cisco ONS 15454 and ONS 15327 optical transport platforms are key building blocks in today’s optical networks due to their unprecedented transport performance and economics. They offer supercharged transport capability by combining the best of traditional SONET TDM (time division multiplexing) and statistical multiplexing in single units. The Cisco ONS 15454 (pictured on right) aggregates traditional facilities such as DS1, DS3, STS-1, OC-3, OC-12, and OC-48 including multi-wavelength DWDM optics, but it also supports data interfaces for Ethernet, ATM, and video. This enables drastically improved efficiencies in the transport layer and breakthrough cost savings for initial and lifecycle deployment. A single ONS 15454 shelf can support combinations of OC-3/c, OC-12/c, OC-48/c, and OC-192. The Cisco ONS 15327 (pictured on left) combines industry leading bandwidth capacity and service diversity in a very compact footprint, enabling service providers to achieve radical economics at the metro edge. Based on the same technology as the industry leading Cisco ONS 15454, the ONS 15327 supports high optical bandwidth and has the ability to drop a DS1 from an OC-48 stream. With comprehensive STS- and VT-level bandwidth management and integrated data switching, the Cisco ONS 15327 also serves as a digital cross-connect without the need for additional equipment. It aggregates and switches TDM, Ethernet, and ATM services, and can be managed using the Cisco Transport Manager element management system.
For More Information See the ONS 15454 Web site: http://www.cisco.com/go/ons15454 See the ONS 15327 Web site: http://www.cisco.com/go/ons15327
Cisco ONS 15454 and 15327 Metro Optical Transport Platforms
8-2
Chapter 8
Optical Transport
Cisco ONS 15200 Optical Metro DWDM Series
The Cisco ONS 15216 supercharges wavelength services by supporting from 18 to 34 ITU-grid wavelengths, and provides unprecedented transport flexibility with optical filtering, Optical Add/Drop Multiplexing (OADM), Optical Performance Monitoring and Amplification. It allows service providers to deliver more services per wavelength and more wavelengths per fiber.
For More Information See the ONS 15200 Series Web site: http://www.cisco.com/go/ons15200
Cisco ONS 15200 Optical Metro DWDM Series
8-3
CHAPTER 8 OPTICAL TRANSPORT
The Cisco ONS 15252 and 15201 are part of the Cisco ONS 15200 Metro DWDM family, the first solution to deliver instant wavelengths to buildings, premises, or PoPs. The ONS 15252 and 15201 may be used to realize many sub-network topologies and can handle a mixture of point-to-point, hubbed, and meshed traffic patterns. Capacity may be added channel-by-channel in a highly cost-effective manner. Since they feature broadband transponders, a wide range of traffic types may be handled (SONET/SDH, Gigabit Ethernet) over a range of line rates up to 2.5 Gbs. Channel protection options include unprotected, client-protected, and (optical channel) fiber protection. The ONS 15252 is a multi-channel unit and the ONS 15201 is a single channel unit node. Both have exceptionally small footprints and low power consumption.
Chapter 8
Optical Transport
Cisco Metro 1500 32-Lambda DWDM Platform for Enterprise Networks The Cisco Metro 1500 series Metropolitan Area Network DWDM is the industry’s leading enterprise dense wave division multiplexer (DWDM) platform. Designed for high-performance, high-availability, and flexible configurations, the Metro 1500 is a protocol-independent, cost-effective solution that supports 32 wavelengths per fiber.
When to Sell Sell This Product
When a Customer Needs These Features
Cisco Metro 1500
• • • • •
IBM ESCON/FICON Channel connectivity Gigabit Ethernet Connectivity Fiber Channel Storage Area Network applications Fiber Channel/FICON Network Attached Storage Applications ATM/SONET Connectivity
Key Features • Compact modular design with fault tolerant hot-swappable modules • Transparent WDM modules from 10 Mbps to 1250 Mbps for multi-protocol support, including, Ethernet, Fast Ethernet, Gigabit Ethernet, ESCON, FDDI, Token Ring, and ATM OC-3 • Standards-based Management SNMP and CISCO View • 200 GHz (1.6 nm) channel spacing based on ITU-T G.692 listed frequencies • Single Span budget of 26 dB for 10 Mbps to 1250 Mbps (Gigabit) • Line protection (1+1) for each fiber; line switching time