CIRRUS LIGHTING EXTERIOR. Lighting Presentation

CIRRUS LIGHTING EXTERIOR Lighting Presentation - 2014 13 x 8 13 x 8 13 x 8 ceiling mounting light fitting with IP20 protection rating for indoor u...
0 downloads 2 Views 8MB Size
CIRRUS LIGHTING EXTERIOR Lighting Presentation - 2014

13 x 8

13 x 8

13 x 8 ceiling mounting light fitting with IP20 protection rating for indoor use. made up of a H-shaped profile available in matt silver anodized aluminium, it has a 13x8mm section and is long from 110 to 2110mm with a 100mm pitch. the lower part of the extruded profile is lid with a cover to facilitate the wall-mounting and has a polycarbonate diffuser at the top to ensure uniform lighting. it has a amp.2 connector and is fitted with 3000K linear led, 13W per meter 24Vdc. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

16.64 Battiscopa IP68

16.64 Battiscopa IP68

16.64 Battiscopa IP68 16.64 IP68 battiscopa is a white painted or matt silver oxidised extruded aluminium profile with a right-angled triangular section, the catheti of which measure 50 and 90mm, complete with polycarbonate diffuser. the profile is available in a length of 3011mm and is wired with a 3000K IP68 led kit in lengths of 510mm, 1010mm, 2010mm and 3010mm with relative powers of 5W, 10,5W, 21W, 32W, or with an rgb led kit in lengths of 510mm, 1010mm, 2010mm and 3010mm with relative powers of 9W, 18W, 36W, 54W powered with 24Vdc. supplied without power supply units and rgb controls. triangular end caps in the same finishes as the profile, a straight joint to connect several profiles and power supply cable fitted with an IP68 connector are available as accessories. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

A4

A4

A4 IP65 rated light fitting for external use, consisting of a floodlight made of extruded aluminium with a section of 40x210mm, suitable for installation on pole and wall using special components, available in three models: 300, 600 and 900, powder painted in antique brown, night black, scurodivals and silver grey finishes. each model has three wirings powered at 24Vdc, equipped with 3000K leds and protected by an extraclear shockproof glass screen: 53W diffused light, for car parks and parks; 47W with street light diffuser; 47W with asymmetrical diffuser. the galvanised steel pole, with a section of 80x80mmanchor it is available in three versions with the same finishes as the floodlights: 4000mm, for a max of 2 floodlights; 6000mm, for a max of 4 floodlights at two heights; 8000mm, for a max of 6 floodlights at three heights. the installation of the floodlights on poles envisages the use of different types of support: single, adjustable from 0° to 90°, for use only with the 300 floodlight; single fixed inclined by 5°, recommended for wirings with asymmetric and street light diffusers; double fixed inclined by 5°. the supports can be adapted to 60 and 76 mm diameter poles using special accessories. the installation of the floodlights on the wall envisages the use of two single supports:adjustable from 0° to 90° and fixed inclined by 5°,.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Bacchetta Magica

Bacchetta Magica

Bacchetta Magica IP65 lighting fixture for indoor and outdoor applications in transparent UV resistant polycarbonate. it can be installed on walls and ceilings and even in the suspended version, by means of the apposite kit (l. 3000mm cable). HE version is available in dimensions: : 945mm, 1545mm, 1640mm, 1845mm e 1940mm and it is wired respectively for fluorescent lamps G5 14W, 28W and 35W HE. HO version is available in dimensions: 945mm, 1545mm, 1640mm and it is wired respectively for fluorescent lamps G5 24W and 54W HO. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Bacchetta Magica LED

Bacchetta Magica LED

Bacchetta Magica LED IP67 rated interior and exterior light fitting in uv–ray resistant transparent polycarbonate. it can be wall or ceiling mounted using the appropriate hangers, supplied as standard, or suspended using the appropriate kit (3000mm long). the bacchetta magica led is fitted with a white 3000K diffusing led and is available in four sizes: 635mm, 935mm, 1235mm, 1535mm lengths with 9W, 13,5W, 18W and 22,5W ratings respectively. the rgb led version with converter allows the light to be modulated from white to various colour gradations and is available in four sizes: 635mm, 935mm, 1235mm, 1535mm lengths with 12W, 18W, 24W and 30W ratings respectively. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Bacchetta Magica

Bacchetta Magica Terra

Bacchetta Magica Terra IP40 floor-standing light fitting for interior and exterior use, consisting of a 180x180mm natural steel base supplied with an inclined coupling with a ball into which a bacchetta magica 1940mm long and 40mm in diameter made of transparent UV resistant polycarbonate is fitted. wired with a 35W HE fluorescent tube with G5 base, 240 V supply voltage, 1-10V dimmable with power supply unit and dimmer included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Biblio Palo

Biblio Palo

Biblio Palo light fixture for outdoor use with polished stainless steel, antique brown, night black, scurodivals or silver grey finishing. one or two light sources can be installed on the 3000mm or 4000mm high pole. they can take E27 max 150W halogen / led lamps, G12 70W metal halide lamps or GX24q-4 42W energy saving fluorescent lamps. the safety frosted glass with gasket is included, giving the lamp IP44 rating.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Biblio Parete

Biblio Parete

Biblio Parete IP44 wall lamp for interior and exterior use with polished stainless steel, antique brown, night black, scurodivals or silver grey finishing. biblio pr can take E27 max 150W halogen / led lamps, G12 70W metal halide lamps or GX24q-4 42W energy saving fluorescent lamps. the safety frosted glass with gasket is included, giving the lamp IP44 rating.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Big feet

Big Feet

Big Feet standing floodlight for indoors or outdoors made of peraluman aluminium alloy. it features frosted or transparent glass and an IP67 protection rating. it can take halogen, fluorescent or metal halide lamps. louver, oblique light frame with transparent glass (only for metal halide kits) and anti-glare ring (only for E27 kit) are also available. impact test resistance at IK10 20J (Joules).

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Bilbo

Bilbo

Bilbo IP55 rated wall and pole light fitting for indoor and outdoor use, made of antique brown, night black, scurodivals and silver grey painted aluminium. for the wall version, the bilbo g parete wired with G12 70W or 150W lamp with and adjustable head of diameter 300mm and bilbo p parete wired with G8,5 35W or 70W 8° or 40° lamp, or V led.t/80 efficency 3000K Ra80 24,7W with an adjustable head of diameter 150mm are available. 240V 50/60Hz, including the power supply unit. for the pole version, bilbo g and bilbo p with the same wiring and adjustable heads as the wall version are available, excluding the power supply unit. accessories: stainless steel stem suitable for fastening to the ground or to a stake for installation in gardens. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

C1

C1

C1 IP20 modular system for indoor use in white or matt silver oxidized extruded aluminium, available in recessed, ceiling and suspended versions. the electrified modules, complete with supply unit for T5 fluorescent tubes and polycarbonate diffusers, are available in four lengths: 600mm, 900mm, 1200mm and 1500mm and are wired for G5 14W, 21W, 28W and 35W lamps. being wired for the 'tutta luce' version, the power supply unit is located inside the profile and the polycarbonate diffuser covers the whole length of the electrified module, creating a continuous line of light. as well as the electrified modules, the following items are also available: 50W dichroic kit, profiles and connectors complete with cover and accessories (such as closing caps and linear joints). the recessed version of C1 is wired also for a 3000K white led or for rgb led with converter which allow modulating the light from white to various shades of colour. supply unit and rgb controls are not included. the led C1 is available in the following lengths: 600mm, 900mm, 1200mm, 1500mm, with 18W, 27W, 36W, 45W ratings for the white led and 12W, 18W, 24W, 30W for rgb led version. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

C1 LED

C1 LED

C1 LED Also available IP68 IP20 recessed modular system for interior use in white or matt silver oxidised extruded aluminium, complete with polycarbonate diffuser, available in four sizes: 600mm, 900mm, 1200mm and 1500mm wired in the ‘all light’ version with 18W, 27W, 36W and 45W 3000K white leds, or wired with 10W, 15W, 20W or 25W rgb leds with 24Vdc power supply. supplied without power supply units and rgb controls. for the version with white leds it is also possible to use hollow profiles measuring 3011mm and wire them with a 6000mm long strip led coil: 20W/m Ra80 2000lm/m, 13W/m Ra95 1150lm/m, 12W/m Ra80 1200lm/m, 6W/m Ra80 600lm/m 2700/3000/4000/5000K, while for the rgb led version, there is a 6000mm long strip led coil with power of 14W/m, sectionable every 98mm, both powered at a voltage of 24Vdc. in addition to the electrified modules, there are: profiles and fittings complete with cover and accessories (such as caps and straight joints). a seal is available to give the profile a safety rating of IP44 at the front and IP20 at the back (recessed). Cirrus Lighting

T: 020 7193 2175

E: [email protected]

C1 LED

C1 LED

C1 LED (IP68) Mario nanni 2003 IP20 recessed modular system for interior use in white or matt silver oxidised extruded aluminium, complete with polycarbonate diffuser. Available in four sizes: 600mm, 900mm, 1200mm and 1500mm wired in the ‘all light’ version with 18W, 27W, 36W and 45W 3000W white leds, or wired with 10W, 15W 20W or 25W rgb leds with 24Vdc power supply. Supplied without power supply units and rgb controls. For the version with white leds it is also possible to use hollow profiles measuring 3011mm and wire them with a 6000mm long strip led coil: 20W/m Ra80 2000Im/m, 13W/m Ra95 1150Im/m, 12W/m Ra80 1200Im/m, 6W/m Ra80 600Im/m 2700/3000/4000/5000K, while for the rgb led version, there is a 6000mm long strip led coil with power of 14W/m, sectionable every 98mm, both powered at a voltage of 24Vdc. In addition to the electrified modules, there are: profiles and fittings complete with cover and accessories (such as caps and straight joints). A seal is available to give the profile a safety rating of IP44 at the front and IP20 at the back (recessed). Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Campanula

Campanula

Campanula IP44 rated wall outdoor lamp.campanula consists of extruded aluminium in the peculiar and graceful shape of a mountain flower, after which it is named. it is available in antique brown, night black, scurodivals or silver grey finishes and it can be fixed to a wall with a specially provided rose. wired for E14 halogen or with 8W 3000K 26° 800lm leds. control gear included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cantilever

Cantilever

Cantilever recessed telescopic lamp IP44. it is wired with an electronic power supply unit for G5 fluorescent tubes for 14W and 28W and respectively 950mm or 1550mm long. it is supplied with its own housing.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Catenaria Di Luce Serpetine

Catenaria Di Luce Serpentine

Catenaria Di Luce Serpentine IP44 suspension light fitting for outdoor. realized with a 25mt long electric wire, on which con be applied, to the desired distance, 3000K 4W 24Vdc led light sources or 25W 24Vca light bulbs. led light sources are available in different models: with sandblasted glass for a diffused light, with adjustable spotlight or fixed spotlight for accent light, power supply max100W not included. it is also possible to use 24V light bulbs for diffused light, power supply max 200W not included. all the versions can be used with suspension wire of different length. it is not possible to use both light sources on the same catenary.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cilindro PL

Cilindro PL

Cilindro PL indoor and outdoor light fixture IP44 for ceilings in polished aluminium or white, grey, black or bronze painted finish, for E27 halogene par 20 or 30 lamps. not to be used with halopar coolbeam lamps. pl 30 version can be also supplied with leads for fluorescent lamps, led or for metal halide lamps (complete with ballast) with G12 socket. it is also available a pl 35 version (dn.170mm) in polished steel or white, grey, black or bronze painted finish. this can be wired for metal halide lamps with G12 socket, for GX24q-4 42W fluorescent lamps. it can be also used as emergency light with 26W GX24q-3 fluorescent+emergency kit. pr monoemission and double emission brackets for wall.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cilindro Pr Staffa

Cilindro Pr Staffa

Cilindro Pr Staffa wall light fixture for interior and exterior use IP44 made of polished or white, grey, black or bronze painted aluminium. it is available in two versions: 200mm and 400mm with E27 lamps. the pr 40 version is supplied with a double emission wiring kit. not to be used with coolbeam lamps.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Codega Plafone

Codega Plafone

Codega Plafone IP44 ceiling lamp for indoor and outdoor use. codega is a lantern made up of a satin finish aluminium structure which becomes a handle, an opal polycarbonate diffuser and an aluminium base varnished in my bianco or my nero. there are two versions: one 320mm high with a handle, and the other 240mm high-no handle. both are wired for E27 15W 240V lamps. lamp included.

Contents

Codega Tavolo

Codega Tavolo

Codega Tavolo table lamp for for indoor and outdoor use, IP44, 320mm h. codega is a portable lantern consisting of a satin finish aluminium structure which becomes a handle, an opal polycarbonate diffuser and a rosewood or metal base varnished in my nero which houses 1 x 3000K 4W battery-powered leds, with an operating time of 10 hours. powered from the main it can be used as an emergency lamp. the battery charger is included. a version wired with a E27 15W 240V lamp is available, lamp included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Concrete

Concrete

Concrete illuminating bollards made of concrete for outdoors with IP55 protection. available in uplighter and downlighter versions in two different heights: 1000mm and 540mm. concrete is able to house halogen, metal halide and fluorescent kits to be completed with special clear or frosted shockproof glass. for concrete 1 bi–emission fluorescent and metal halide kits are available. for a correct installation a ground plate is necessary.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cornice IP55

Cornice IP55

Cornice IP55 IP55 lighting fixture for indoor and outdoor applications in steel grey or white painted. designed to be placed on capitals and frames, takes it RX7s 70W metal halide lamps, complete with electronic control gear unit, linear halogen lamp R7s 200W or fluorescent with lamp GX24q–4 42W.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Corte

Corte

Corte IP65 floor-standing lamp for outdoor use, made up of a stainless steel cylindrical core (diameter 50mm) and wired with 3000K, 240V, power supply unit included. two blades, set together like the pages of a book, revolve 350° around the central stem. there are two versions with two different sizes: 500x680x60mm led 5W, 240x1180x60mm led 10,5W. the external structure is made of aluminium painted white, the outer portion coupled with mirror-polished stainless steel sheet. the unit can be secured to the ground with round plate or with stake.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubi Bandiera Accessori

Cubi Bandiera Accessori

Cubi Bandiera Accessori the accessories in 316L stainless steel and in corten steel for cubo bandiera allow a more flexible use of the fixtures; wall mounting: by means of a flange enabling up to 120° rotation; floor standing: a stake extends its use to gardens and balconies. for outdoor use: the support makes it possible to fasten the cubes (max. 3) onto poles (diameter 76mm in 316L stainless steel, 80mm in corten steel).

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo 15

Cubo 15

Cubo 15 IP65 light fitting for interior and exterior use In AISI 316L polished or satin finish stainless steel and also In antiqued brass for the ceiling version only, with transparent or frosted glass and for fluorescent or incandescent lamps. it can be wall or ceiling mounted or recessed, using a special flush–finish housing. in the flag version, with adjustable bracket, the fitting can be directed as required; it can also be supplied with a stake for fixing Into the ground or a flange for wall mounting which allows it to be rotated up to 150°. when exposed to very salty environments or weather conditions, the use of polished 316L stainless steel is recommended. cubo 15 is also available in natural corten steel that, if exposed to the open air, acquires a brown, self– protecting oxidised coating, which changes in colour over time depending on its exposure to the elements. if fitted indoors, the corten steel will behave like ordinary carbon steel. the flag version is supplied with a corten steel bracket. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo 30

Cubo 30

Cubo 30 IP65 light fitting for interior and exterior use, made of AISI 316L stainless steel. available in the ceiling and flag versions in the following finishes: polished, satin-finish, antique brown varnish, night black, scurodivals, silver grey, white. available transparent or frosted glass it can take fluorescent, incandescent lamps, led. available for the ceiling version also the antiqued brass finishing. wall or ceiling light fixture, it can also be used as a recessed fixture thanks to a special flush-finish housing. the flag version, equipped with an adjustable bracket, allows adjustment of the luminous flux of the appliance and can also be supplied with a ground fixing stake or a flange to fasten it to the wall, allowing up to 150° rotation. installation is also possible on luna nascente using a special fixing bracket. with the emergency kit, the fluorescent+emergency kit and the special pictograms, cubo 30 can also fulfil signalling and emergency functions. in environments and percentage the use of 316L polished stainless steel is recommended. cubo 30 is also available in natural corten steel that, if exposed to the open air, acquires a brown, selfprotecting oxidised coating, which changes in colour over time depending on its exposure to the elements. if fitted indoors, the cor-ten steel will behave like ordinary carbon steel. the flag version is supplied with a cor-ten steel bracket. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo Doccia

Cubo Doccia

Cubo Doccia IP65 light fixture in AISI 316L polished stainless steel with integrated water supply (1/2”, pipe connectors not supplied), available with or without silicone nozzles. it is available in medium (155x155mm) and large (155x300mm) versions, wired for dichroic GU4 20/35W lamp or for 3W led rgb or for a 4W 3000K white led, suitable for ceiling and flag use through special components made of AISI 316L polished stainless steel, and for recessed installation using the special housing. the light from the emission duct crosses the water jet and provides effective lighting in the area involved in the flow, creating suggestive light and shadow effects. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo Large

Cubo Large

Cubo Large lighting fixture for indoors and outdoors IP65 in AISI 316L. available in the ceiling and flag versions in the following finishes: polished, satin-finish, antique brown varnish, night black, scurodivals, silver grey, white and, for the ceiling version only, also in antique brass finish. can be mounted on the wall or ceiling. the flag version, equipped with an adjustable bracket, allows adjustment of the luminous flux of the appliance and can also be supplied with a ground fixing stake or a flange to fasten it to the wall, allowing up to 150° rotation. installation is also possible on luna nascente using a special fixing bracket. wired for different kits: 32W GX24q-3 fluo, and 70W G12 metal halide, with symmetrical and asymmetrical optics, 45W PGZ12 with road optics, 70W G12 with road optics, led. road kits are provided with shock-resistant glass included; for the other kits transparent, frosted, symmetrical or asymmetrical glasses are available, shock-resistant IK09 (10 Joule) and 3mm pyrex and, as accessory, with antiglare louvers. in environments and in weather conditions with high salinity percentage the use of 316L polished stainless steel is recommended. cubo large is also available in natural cor-ten steel that, if exposed to the open air, acquires a brown, self-protecting oxidised coating, which changes in colour over time depending on its exposure to the elements. if fitted indoors, the cor-ten will behave like ordinary carbon steel Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo Medium

Cubo Medium

Cubo Medium IP65 light fixture for interior and exterior applications made of stainless steel AISI 316L. available in the ceiling and flag versions in the following finishes: polished, satin-finish, antique brown varnish, night black, scurodivals, silver grey, white and, for the ceiling version only, also in antique brass finish. available transparent or frosted glass, it can take halogen, fluorescent, metal halide lamps and led. wall or ceiling light fixture. the flag version, equipped with an adjustable bracket, allows adjustment of the luminous flux of the appliance and can also be supplied with a ground fixing stake or a flange to fasten it to the wall, allowing up to 150° rotation. installation is also possible on luna nascente using a special fixing bracket. in an environment and in weather condition with an high percentage of salinity the use of polished stainless steel inox 316L is recommended. cubo medium is also available in natural cor-ten steel that, if exposed to the open air, acquires a brown, self-protecting oxidised coating, which changes in colour over time depending on its exposure to the elements. if fitted indoors, the cor-ten will behave like ordinary carbon steel. the bandiera version is supplied with a cor-ten steel bracket. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo Paletto

Cubo Paletto

Cubo Paletto IP65 rated light fitting, for indoor and outdoor applications, in AISI 316L polished stainless steel and in AISI 304 stainless steel in antique brown, night black, scurodivals and silver grey finishes. it is provided with shock resistant transparent or frosted glass, for fluorescent or incandescent lamps (2x40W E14 incandescent kit, 24 and 36W 2G10 fluorescent kit, 18/24W 2G10 fluorescent + emergency kit, 200W R7s-114 halogen kit and 70W RX7s metal halide kit, led kit). it’s height from the ground is 600mm and the light fixture head is angled at 22°. in environments and climatic conditions with high saline content the polished 316L stainless steel version is recommended.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo Paletto 15/Large

Cubo Paletto 15/Large

Cubo Paletto 15/Large floor-standing lamp with IP65 rating for outdoor lighting, made of AISI 316L stainless steel in the following finishes: antique brown, night black, “vals” black, silver grey and corten. cubo paletto 15 dimensions are 450x160x80mm while cubo paletto large dimensions are 750x160x80mm. both versions are wired for 10W, 3000K leds with champagne-coloured asymmetrical diffuser. power supply unit, shock-proof glass and hot galvanized steel anchor bolt.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Cubo XL

Cubo XL

Cubo XL light fixture for interiors and outdoors with IP65 protection in AISI 316L polished. available in the ceiling and flag versions in the following finishes: polished, satin-finish, antique brown varnish, night black, scurodivals, silver grey, white. can be mounted on the wall or ceiling wired for different kits: 150W RX7s-24 metal halide, 8° and 24° 70W and 150W G12 metal halide, stradale 70W and 150W G12 metal halide with road optics, stradale 60W and 90W PGZ12, led. road kits are provided with shock-resistant glass included; for the other kits transparent and frosted glasses are available, shock-resistant IK09 (10 Joule) and 3mm pirex. in very salty environments and climatic conditions, the use of the 316L polished stainless steel version is strongly recommended. cubo XL is also available in natural cor-ten steel that, if exposed to the open air, acquires a brown, self-protecting oxidised coating, which changes in colour over time depending on its exposure to the elements. if fitted indoors, the cor-ten will behave like ordinary carbon steel. the bandiera version is supplied with a cor-ten steel bracket.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Displei

Displei

Displei Also available in LED Studio baciochhi 2010 recessed and fully concealed light fitting, IP20 or IP55 protection rated, designed for ceiling or wall mounting. Available in the finishes: my bianco, silver, my nero, brown and polished chrome-plated. Available in two sizes: displei dn-35 and displei dn50 which, in turn, include 6 different types: recessed adjustable with springs, recessed adjustable with ring nut for rear fixing, adjustable fully concealed, recessed fixed with springs, recessed fixed with ring nut for rear fixing and fixed fully concealed. The adjustable type (IP20) allows the lamp to be positioned in four different heights (0, -7,+7, +14mm) inside the light fitting, referred to the flush surface of the recessed area, and allows a 30 degree adjustment along the longitudinal axis and a 355 degree rotation inside the light fitting on the horizontal axis. The fixed type (iP55) allows the lamp to be positioned in three different heights (0, +7,+14mm) inside the light fitting, referred to the flush surface of the recessed area. Wired for 12V GU4 35W, GU5.3 50W halogen lamps, for GX10 20/35W metal halide lamps and 3000K led.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Fi 50

Fi 50

Fi 50 IP67 floor, wall, ceiling and suspension light fitting for indoor and outdoor use. fi 50 is a pirex glass cylinder that measures 2,8mm in depth and 50mm in diameter available in four lengths 672, 972, 1272, 1472mm, equipped with end caps in electroless nickel aluminium with 63mm diameter: one is a blind cap and one is a cap IP68 4 with 4-poles male connector. for applications in marine environement or in pools is available a stainless steel 316L version. it is wired with 28,5W white leds (672 mm length), 42W (972mm length), 57W (1272mm length) and 66W (1472mm length). for the entire length it is illuminated with three led continuous light strips , each of them with a different colour temperature: 3000K, 4000K and 5000K wired on a optic made of anodised matt silver extruded aluminium with 36° or 18° beams. the three colour temperatures can be controlled separately by a remote system, so to obtain different luminous effects in the whole available range of whites. accessories: suspension cables, wall attachments and 'luce delle nuvole' control system.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

GiraeFFE

GiraeFFe

GiraeFFe IP55 rated light fitting for outdoor applications in AISI 304 stainless steel, available in antique brown, night black, scurodivals and silver grey finishes. it is 4500mm high, has an accessible terminal board and various accessories may be fitted to it, such as rubbish bins and wooden seats. the light fitting can be installed at a height of 4375mm or 3735mm from ground level. the two fittings can accommodate fluorescent kits or metal halide kits with symmetrical, asymmetrical or road optics. thanks to a bracket they can be mounted also to the ceiling. in the bollard version rock bolt and 1W white led with power pack included to create an accent light are supplied.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

La Stretta

La Stretta

La Stretta IP54 recessed light fitting for interior use, fitted with a led lighting kit. the fitting is made of plaster and can be installed on either plasterboard or brickwork walls, with the particular ability to blend in with the surface on which it is mounted and the option of finishing the outer surface in the same way as the surrounding wall, using the same processes as for filling, skimming and painting a wall. there are two versions: one with a slit on the right side and one with a right cut and one with a left cut. the final result is a section of wall, cut out, gently receding inwards, as if creating a niche from which the light emerges. the fitting does not have a preferred mounting position and can be located anywhere on vertical and horizontal surfaces. the kit supplied with the fitting consists of a blue or white 1W 3000K led. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Lanterna Massima

Lanterna Massima

Lanterna Massima IP55 light fitting for outdoor use, made up of a tempered extra clear blown-glass vial and an brown painted aluminium mounted on a pole that rises 4,5m from the ground, with a 102mm diameter base that becomes a 60mm diameter on top. the head of the pole is attached with a special clamp from which a brown varnished steel pipe, shaped irregurarly, come to hold the lantern, the lantern is available wired for G12 35/70W halide lamps or PGZ12 45/60/90W, power supply units not included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Leis

Leis

Leis light fitting made of antique silver or antique brown oxidised extruded aluminium; it can be mounted on the ceiling or semirecessed. the indoor version is wired with a G9 max 60W (IP20 rated) 240V 50-60Hz halogen lamp; the outdoor version (IP44 rated) is wired with a GY6.35 IRC max 50W 12V halogen lamp, with a GU6.5 35W metal halide lamp (power supply unit and transformer not included, to be housed in a remote place) and with a 7W 3000K 240V 50-60Hz led source. safety glass included. a fully concealed plaster housing is available to allow also semirecessed installation. leis is suitable for installation on normally flammable surfaces. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Lenticchia

Lenticchia

Lenticchia ceiling or hanging light fixture for interiors IP20 or IP44. the hand-blown glass diffuser, sanded inside and outside, is available in three different sizes: 195mm, 400mm and 600mm. the 195mm version houses a low voltage ministar lamp 12V with GY6,35 35W (ceiling), 50W (hanging) socket or 250V with G9 40W. the 400mm version houses 3 lamps with G9 40W socket and 250V power supply or led 3000K 18W 1300lm. the 600mm version houses 5 lamps with G9 40W socket or led 3000K 35W 2500lm. only for the suspension is available the wiring PGJ5 35W. either the fully integrated canopy or the ceiling canopy can be used. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Lilia

Lilia

Lilia floor lamp for outdoor IP44 or IP55 in stainless steel AISI 316L brushed and passivated. 4350mm high, is installed with proper anchor bolt high 530mm and has a conical reflector with a diameter of 460mm high 290mm. wired with a E27 lamp voltage 120W IP44 PAR38, or a metal halide PAR30 35W or 70W, control gear IP44 not included, or a G8,5 35W or 70W IP55 8 °/40°, or wired with V led.t/80 efficency 3000K (ra80 11,6W/350mA, 17,1W/500mA, 24,7W/700mA). remote control gear.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Lucciola

Lucciola

Lucciola lighting fitting for indoors and outdoors IP67. it consists of a carbon fibre stem, 1000/2000/3000mm high and dia. 5mm. it is possible to fix it in the ground with a spike or on a 140x140mm square base in nickel plated iron. the head is wired with a 1W 3000K white led on which it is possible to fit a clear glass diffuser to create a seductive lighting effect, or a clear elastomer diffuser particularly suited to outdoor use thanks to its thermal and mechanical resistance. power supply unit not included. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Lucus

Lucus

Lucus IP65 rated light fitting for outdoor, available in versions 7768mm and 4609mm high. it consists of 4 no. AISI 304 stainless steel tubes 35mm in diameter and 3,5mm thick, painted in antique brown, night black, ‘scurodivals’ and silver grey. at about 2/3 of its height, the tubes spread apart to accommodate a lamp that provides diffuse ground lighting which may be a glass lantern wired with G12 35/70W or PGZ12 45/90W lamp, or with bilbo g wired with G12 70/150W lamp, power supply excluded. towards the top, they come together again as a support for G8,5 35/70W spotlights (max 4) that provide adjustable accent lighting for façades, trees, details etc… at the base, the tubing sections fit into a steel tube, which is set in a 900mm deep reinforced concrete plinth. the pole is particularly suitable for use at historic sites due to a shape that echoes that of historical lanterns.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Luna Nascente

Luna Nascente

Luna Nascente IP55 light fitting for outdoor use with a motorized system for lighting buildings, monuments and large areas. luna nascente (rising moon) is made of steel with antique brown, night black, scurodivals or silver grey finishing. luna nascente works thanks to a mobile linkage, that, by rotating 160° enables the chosen outdoor use floodlight (max 25kg) to appear or disappear according to necessity. it can be wired with the following floodlights: 70W and 150W G12 8° and 24° metal halide spotlight, 70W and 150W G12 metal halide road light or 60W and 90W PGZ12 cosmopolis road light. the device can create different scenarios thanks to an electronic control unit interfaced with the appropriate software. single and double versions are available both with a water parting stainless steel element. the device is available in the ON–OFF simple dusk switch version or with a intelligent control system with which it is possible to position it at different pre programmed angles or on local and/or remote pc programmed scenarios. it is also possible to control the functioning of the device with a mobile phone and to receive monthly emails containing the work data (number of movements, hours of activity, planned maintenance timing, possible occurred alarms) Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M1 Micro

M1 Micro

M1 Micro Mario nanni 1994 recessed IP20 or IP40 light fitting for interior use, in white, grey and black coated metal. It can be installed in plasterboard or brickwork walls using the appropriate housings and is available in both m1 micro 45 degree and m1 micro 90 degree versions. The m1 micro 90 degree takes 12V 20W GU4 halogen lamp or a 2W 3000K led. The m1 micro 45 degree version to be used as a step light or as ambient light, can be fitted with the 12 V 1.5W G4 led 3000K supplied or a 4W 3000K led. Bulb depth can be adjusted through a maximum distance of 35mm for both versions. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M3

M3

M3 recessed floodlight suitable for indoor or outdoor use made of peraluman aluminium alloy with an IP67 IK10 (20 joules) protection rating. it features frosted or transparent glass and can be fitted with halogen, led, fluorescent, or metal halide lamps. a special stainless steel frame is available for recessing the spotlight. anti-glare louvres, a grazing light frame with transparent glass and an anti-glare ring (for E27 kits only) are available on request. the grazing light version is supplied with 70W RX7s and 150W RX7s-24 metal halide lamps or 6W 3000K led, which throw a grazing light onto the ground.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M3 Albero

M3 Albero

M3 Albero IP67 rated IK10 (20joules) recessed drive-over projector light fitting for indoor and outdoor use, made of polyethylene and peraluman aluminium. consisting of a projector inserted into a housing to be embedded into the ground, which allows its orientation. the housing measures 460x460x280mm and the light fitting consists of a cylinder that measures 120mm in diameter and 120mm high, wired with a G12 35W or 70W adjustable metal halide lamp. power supply unit and transparent glass included. a special screen printing on the glass allows the light to spread through the air with the same effect as backlighting among the leaves of the trees.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M4

M4

M4 (also available in LED) Mario nanni 1995 IP67 rated recessed light fitting for interior and exterior use IK08 (5 joules), consisting of a cylindrical body in matt black aluminium or natural brass and round or square shaped bezels in aluminium or natural brass. Available in two versions: comfort (118mm long) and short (66mm long); it can be recessed, using the relevant housings or ground (drive-over), wall or ceiling mounted. The exterior housing enables the short floodlight to be ceiling mounted, while the large housing can accommodate the 70W IP67 rated transformer. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M44

M44

M44 recessed IP67 IK07 (2 joule) projector for indoor and outdoor applications, consisting of a matt aluminium or matt black cylindrical body and a round or square bezel in bright silver aluminium. m44 is complete with GU5,3 lamp-holder for max 35W dichroic lamps diameter 51 max or with GX10 light-holder for 20W and 35W lamps or 8W led, all of them with matt black finish. it may be recessed by means of the relevant housing to be fitted into floor and the wall.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

M444

M444

M444 recessed projector for interiors and exteriors, IP67 protection, consisting of a cylindrical body in opaque aluminium and a bright silver round aluminium bezel with internal clear or satin glass (drive over). m444 is complete with a G12 lampholder for metal halide lamps. it can also be recessed into floors and walls using housings provided for the purpose. also available with 35–70W power supply.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Maxxi Poppy

Maxxi Poppy

Maxxi Poppy IP55 rated floor light for outdoor use, made of a red fibreglass diffuser mounted on an outdoor post, in antique brown painted steel, to be anchored to a specific ground plate that measures 530mm high. are available: with a maximum elliptical section of 1800x2050mm, with an above-ground height of 4350mm, and with a maximum elliptical section of 1610mmx1590mm, with an above-ground height of 3930mm. both versions are wired for the G12 35W/70W/150W metal halide lamps. one more available version : IP65 with a maximum elliptical section of 760x840mm, with an above-ground height of 2040mm, wired for the metal halide lamp G12 35/70W.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

MM Parete- SOffitto

MM Parete- Soffitto

MM Parete- Soffitto wall /ceiling lamp for exterior use IP44 made in AISI 304 steel painted white with glossy aluminium lamp support and closed with IK10 transparent glass. it's wired with 60W 250V E27 halogen lamp in the wall version and 2x60W 250V E27 in the ceiling version.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Nilu

Nilu

Nilu IP67 rated floor-standing indoor and outdoor lamp, it consists of a 1400mm high carbon fibre stem with a diameter of 5mm. it can be fixed to the ground with a stake or directly on a 140x140mm nichel-plated steel square base. the head of the stem diffuses a 1W 3000K white led light with a 350mA constant current power supply unit (not included) and it is enveloped in a water-lily flower made of weather-proof nautical map paper particularly suited for outdoor use. power supply unit not included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Ninfea

Ninfea

Ninfea tea light holder consisting of two sheets of parchment in the shape of a water lily, resting on a green polycarbonate base. creating the shape of ninfea couldn't be simpler, thanks to the tracks that indicate the folding lines and the shaped ends for fastening the petals together. the candle is included in the box.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Ombrella

Ombrella

Ombrella floor lamp for exterior use, with a 316L stainless steel and 20 micron matt silver anodised aluminium structure. the canvas cover is made of white acrylic fabric. it stands on a 316L stainless steel square base or can be recessed using a special ground anchor. the height of the support stem is adjustable. ombrella is wired for 4x3W rgb leds for indirect light, plus 6 3x1W 3000K white leds, fitted with 25° light concentrating lenses, for direct light. ombrella is designed as an independent fitting or as part of a system of fittings linked together and synchronised. in both versions, it is possible to control the light sources using a single remote control handset with which to turn direct and indirect light fittings on and off, allowing separate adjustment. It is also possible to manage and synchronize the light sources using a remote DMX signal generator, not included. the remote control also allows the choice of programmed scenery and effects for rgb sources. ombrella is powered at low voltage (24Vdc), connected to its own separate electronic power supply unit. when closed it can be covered with its own transparent wrap which allows light diffusion, transforming it into a new light fitting. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

P1

P1

P1 light fitting for wall mounting and with fastening stake, IP65 protection-rated for indoor and outdoor use. available in the finishes antique brown, night black, scurodivals and silver grey. it is made up of a cylindrical head with 36mm diameter and 72mm height. adjustable by 355° along the vertical axis and by 90° along the horizontal axis inserted on a wall bracket or on a garden stake. the wall mounted version is available either with bracket (36mm diameter) or with a box containing the power supply unit, which is supplied. the stake version is available with a curved rod (12mm diameter, 450mm or 18mm height overground). wired with 6W-630lm 3000K led source, power supply units and cable with connection 3 poles m8 not included.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

P2

P2

P2 light fitting for wall mounting and with fastening stake, IP65 protection rated for indoor and outdoor use. available in the finishes antique brown, night black, scurodivals and silver grey. it is made up of a cylindrical head with 80mm diameter and 126mm height. adjustable by 355° along the vertical axis and by 90° along the horizontal axis inserted on a wall bracket and on a garden stake. the wall mounted version is available either with bracket (80mm diameter) or with a box containing the power supply unit, which is supplied. the stake version is available with a curved rod (20mm diameter, 800mm or 25mm height overground). wired with V led.t/80 3000K (Ra80 24,7W-2300lm), power supply units and cable with connection 3 poles m8 not included. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Palo B

Palo B

Palo B IP67 rated light fitting for exterior use, made of corten steel or aluminium finished in antique brown, night black, dark vals or silver grey. it is available in two versions: 5000mm, using the appropriate ground anchor and 500mm, ground fixing included. the pole head in frosted methacrylate, 100mm high and 80mm diameter, takes four 1W leds, power pack included, in three different colour combinations: white, blue and blue-white. using the appropriate ground fixing it is possible to install the 5000mm version at right angles to the ground or at a 10° angle. corten steel, if exposed to the open air, acquires a brown, selfprotecting oxidised coating, which changes in colour over time depending on its exposure to the elements. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Palo Di Zurigo

Palo Di Zurigo

Palo Di Zurigo IP55 rated light fitting in steel for external use, available finished in antique brown, night black, ‘scurodivals’ or silver grey. it consists of a 4555mm high pole and an chromed steel disc fitted at the top. the light source is enclosed by a screen that directs part of the light to the ground and part of it upwards towards a 1160mm diameter disc shaped in such a way as to reflect a new and differently shaped halo of light onto the ground. the reflector disc is available in various materials: chromed steel or copper, so as to produce light in different shades of colour. it is wired for a 70W maximum G12 metal halide kit.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Palo Martino

Palo Martino

Palo Martino IP55 rated light fitting for outdoor use, consisting of a steel projector with a section of 90x158mm and 616mm long, with a powder paint finish in antique brown, night black, scurodivals or silver grey, for installation on 80x80mm section steel poles, with the same finishes. three versions of pole are available: 4600mm mounting one projector; 6000mm mounting max 2 projectors and 8000mm mounting max 3 projectors. the projector is wired with three 3000K 12W 2700 lm Ra85 led sources, powered at 240V 50-60Hz. power supply unit included. accessory: ground plate.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Reggiolo

Reggiolo

Reggiolo IP67 light fitting for outdoor use, made of steel with in antique brown, night black, scurodivals or silver grey finishing. it's dimensions are 430x430x430mm. it's installed on a recessed m3 floodlight with a 8° light beam and is wired with a 35/70W G12 metal halide light. it can be installed in the ground by using appropriate casing or a recessed frame. by adjusting the reflecting element, the light beam can be directed either horizontally effecting the light on the surrounding pavement or vertically effecting the lighting of vertical elements such as trees, columns ecc.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Sentiero Di Vals

Sentiero Di Vals

Sentiero Di Vals IP65 rated light fitting in steel for external use, available finished in antique brown, night black, 'scurodivals' or silver grey. it is 5200mm high above ground and is fitted with a fully concealed accessible terminal block. the pole is made in one piece, is conical in shape and is inclusive of pole–head. it is designed to accommodate 35/70W G8,5 metal halide kits, including power supply unit, with 8°, 40° or asymmetric light beam, complete with oval shaped frosted protective glass.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Soleeluna Lunaesole

Soleeluna Lunaesole

Soleeluna Lunaesole IP67 lamp for outdoor use. soleeluna is made up of a circular profile, with a 434mm outside diameter and a 40mm height. it is an outdoor system that graphically marks routes, natural details, objects, and urban designs. wired for a 13W 3000K 24Vdc continual light led, it is provided with IP68 connector for electric connection also outdoor.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Square Tube

Square Tube

Square Tube outdoor light fixture IP65 in silver or brown oxidized aluminium available in three sizes: 1000mm, 1600mm and 1900mm. it takes respectively G5 14W, 28W and 35W fluorescent lamps for diffused and uniform light. square tubes can be used free standing or fitted to the ceiling and, thanks to the special flange, can be turned by up to 120°. the stainless–steel spike allows installation also in parks and gardens.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Tsukimiso

Tsukimiso

Tsukimiso floor-standing outdoor lamp made up of two parts: one has to be laid underground, with a IP68 rating, the other one is made up of a led top with a IP65 rating. tsukimiso consists in a stainless steel telescopic stem, 316L, that rises up to 600mm from the ground, on top of which there is the head of the aluminium light fitting, made up of a cylinder with a diameter of 90mm and a 25mm height. the top is wired for 6 leds (overall 6W and 3000K) with an symmetric ground addressed light. a motor-driven system, which has a stepper motor, allows the millimetric setting of the light fitting. consequently tsukimiso looks like a night flower that disappears during the day and that rises from the ground at night, thanks to the darkness; its adjustable height allows to create ever-changing, fascinating sceneries of light, with unexpected suggestions. tsukimiso is equipped with pvc housing; the control system must be ordered separately with dmx control. it is also available a stable version to plant in the ground with the appropriate marker. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Unaghi

Unaghi

Unaghi IP68 rated floor-standing, wall, ceiling and suspension light fitting for interior and exterior use. unaghi is a pyrex glass cylinder with a 2.8mm thickness and a diameter of 45mm, available in four different lengths: 672, 972, 1272 and 1472mm, complete with 316L stainless steel end stoppers, one blind and one fit with a four-pole IP68 male connector. for the whole length it is lit by three strips of continual light led each of a different colour temperature. 3000K, 4000K and 5000K. the three three colour temperatures can be controlled separately with a remote control so as to obtain the desired effects in the whole range of whites available. accessories: suspension cables and wall attachments are available. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

UpOGalleggio

UpOGalleggio

UpOGalleggio a tiny UpO comes down to earth, but decides not to land, preferring to float in its completely watertight hull. it has come in peace. it is see–through because it has nothing to hide, and, in fact enjoys casting its delicate light on all that surrounds it, like the shimmering of the moon on the surface of the sea. inside it is home to three tiny leds powered by three ultra–modern rechargeable batteries (NiMH). they are working in complete harmony with one another, each strategically placed : one lower axial and the other two placed radially on opposite sides. they light up in a host of combinations: red–white, blue–white, blue–blue, red–red. like technological fireflies, they are sensitive little creatures blinking in the dark. they wait for the circuit to close and for both poles to caress the water, before they start to glimmer. a brief charge makes them flicker on and off. then comes their startling transformation into gliding lamps or reading lights. they are nurtured by this contact, and once separated, shine for 5 seconds more, then sink into darkness. they love playing with colour and light, bobbing around carefree in a pool or a hot bathtub, while you relax with a book or take a relaxing stroll. but once their games are over, they take wearily to their beds and snuggle down to be recharged with precious energy until the current of sleep leaves them, and they awake, revitalized, ideally, they should sleep for fourteen hours before they are refreshed enough to return to their playful games, dancing in our hands or among the waves of water, illuminating all around. Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Vase

Vase

Vase standing floodlight for indoors or outdoors made of peraluman aluminium alloy. it features frosted or transparent glass and an IP67 protection rating. it can take halogen, fluorescent or metal halide lamps. louvre, oblique light frame In transparent glass (only for metal halide kit) andanti–glare ring (only for kit E27) are also available. impact test resistance at IK10 20J (Joules).

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Zero

Zero

Zero IP67 spotlight for interiors and exteriors, comprising a cylindrical body and round bezel, both in opaque oxidized aluminium. it can be installed on the ceiling, wall or ground by means of specific housing. it can also be secured by means of a spring or ring nut and rear screws. wired for 1W led 3000K/4000K in different colours on an interchangeable mobile head, meaning that the light colour can be changed without having to replace the body.

Cirrus Lighting

T: 020 7193 2175

E: [email protected]

Zero Orientabile

Zero Orientabile

Zero Orientabile IP40 recessed light fitting, made of silver or black oxidized aluminium or white varnished aluminium. it can rotate 10° on the longitudinal axis and is wired for 3000K white led, 1W 350mA and 2W 500mA. the light fitting can produce different light effects thanks to the use of various lens, 8°, 30°, 45° and elliptical, that must be ordered aside.

Contact Us Distributor for Viabizzuno Web: www.cirruslighting.co.uk Email: [email protected] Tel: 0207 193 2175 Fax: 0207 193 3175

Suggest Documents