Installation and User’s Guide

Installation and User’s Guide

1/2.5” PRIMARY COLOR CMOS HIGH SENSITIVE DAY/NIGHT HD CCTV

CHDC-22SDC / CHDC-22SDHSC HD CCTV CAMERA

http://www.orionimages.com All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein

http://www.orionimages.com

Installation and User’s Guide

THANK YOU FOR CHOOSING ORION Thank you for choosing ORION Images high quality HD CCTV Camera. Please read this instruction manual carefully to keep your ORION Images product at peak performance for longer service duration. All ORION Images products are designed and manufactured with utmost care and craftsmanship to provide long life and high quality performance, if it is properly used and maintained as outlined in this manual. This high performance HD CCTV camera is equipped with a 1/2.5” 2.2M CMOS sensor, which has an extremely wide range of uses in many different applications and conditions.

CONTENTS OF CHDC-22SDC MANUAL 1.

Handling precautions………………………………………………………………...... Pg4

2.

General………………………………………………………………………………….. Pg4

3.

Package of Content……………………………………………………………………. Pg4

4.

Features…………………………………………………………………………………. Pg5

5.

Name of parts and functions…………………………………………………………... Pg6-7

6.

Operation………………………………………………………………………………… Pg8 6.1. User setup………………………………………………………………………….. Pg8 6.2. SETUP switches and function……………………………………………………. Pg8 6.3. Entering the setup mode and its basics…………………………………………. Pg9-13

7.

Application of Output……………………………………………………………………. Pg14

8.

Specifications……………………………………………………………………………. Pg15

9.

Outline Dimension………………………………………………………………………. Pg16

10. Warranty and after-sale service……………………………………………………….. Pg17

2

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg2

Installation and User’s Guide

http://www.orionimages.com

CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures.

CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.

Instructions for Disposal of Electrical and Electronic Equipment in Private Households Disposal of used Electric and Electronic Equipment (Applicable in the European Union and other European countries with waste recycling, disposal and collection regulations) This symbol on the product, or in the related documents in the package, indicates that this product shall not be treated as normal household waste. Instead, it should be taken to a proper applicable collection point or depot for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for the environment and human health which could otherwise caused by inappropriate handling of this product. The correct recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city authority, your household waste disposal service or the place where you purchased the product.

3

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg3

Installation and User’s Guide

http://www.orionimages.com

1. HANDLING PRECAUTIONS z z z z z z z z z z z

Do not install the camera in a water-splashed or highly humid environment. Do not use the camera where the ambient temperature drops below 0° C or rises above +50° C. The images and component parts may be adversely affected or the camera may not function correctly. Never open the camera case because there are precision electrical and electronic components inside and an accident may results. Do not put anything metallic or any other foreign substances through the vent, as a fire or electric shock may result. Be sure to turn off the power before installing or making connections. Do not install the camera in places exposed to heat, vibrations and shock. Be careful not to drop or give a strong shock to the camera while transporting it. Do not touch the image sensor. Do not orientate the camera directly towards the sun. Some types of lenses may hunt in adverse light conditions. In such cases please re-adjust the lens in line with the instructions in the manual. Because of the characteristics of the digital image device, images may look unnatural at high temperatures, this does not mean the camera is faulty.

2. GENERAL This HD CCTV Camera is provided with a High performance 1/2.5 inch 2.2M CMOS sensor. The camera features a built-in optical 10x zoom lens (1/3.6” f=4.5~45.0mm, f1.8~2.2) high resolution, and is equipped with digital DAY/NIGHT function, intelligent back-light compensation by which you can achieve proper Back Light Compensation, Crystal controlled internal sync lock system, Various modes of convenient Automatic while balancing, mirror image, camera setup and control is also possible locally using a remote controller, or remote via RS-232C and this setup data is stored in the built-in non-volatile memory. The camera is best suited for HD CCTV surveillance purposes, from single camera operation to large scale integrated systems for visual information management.

3. PACKAGE OF CONTENT

Camera Mount

2.2M Camera

4

Manual

M2.5 Screw

Remote Control

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

Multi Port Cable

pg4

http://www.orionimages.com

Installation and User’s Guide

4. FEATURES

5

1

HD-SDI OUTPUT This camera outputs and HD-SDI signal featuring resolutions of 1080/25p, 30p, 50i, 60i or 720/30p, 50p, 60p SMPTE 292M standard.

2

MULTI OUTPUT MODEL (CHDC-22SDHSC) It has outputs of HD-SDI, Composite, S-Video, HDMI, and YPbPr Component.

3

NTSC / PAL OUTPUT This output can be used for a test or an adjustment.

4

DAY / NIGHT FUNCTION This camera delivers high quality color images during the day. As light diminishes below a certain level, the camera can automatically switch to night mode to make use of near-infrared (IR) light to deliver high-quality, black and white images.

5

BACK LIGHT COMPENSATION Well-designed BLC, back light compensation, facility is provided which can assign a compensation area for back light compensation to have an optimum balanced clear picture reproduction.

6

DIGITAL EFFECT FUNCTION This output video can be selected in either normal, negative, solarization, pasteurization, or sephia, monochrome.

7

AUTOMATIC OR MANUAL WHITE BALANCE In addition to the Auto white balance, this camera provide manually adjustment of x-value / yvalue.

8

AUTO SLOW SHUTTER ON / OFF is provided

9

MIRROR IMAGE This flips the image horizontally or vertically.

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg5

Installation and User’s Guide

http://www.orionimages.com

5. NAMES OF PARTS AND FUNCTIONS

Top View

6

Rear View

①

BUILT-IN ZOOM LENS This is optical 10X zoom lens built in. 1/3.6” F=4.5~45mm, F1.8 ~ 2.2

②

CAMERA MOUNT These holes are for camera mount plate enclosed and provided in both top and bottom of the camera body.

③

COMPONENT VIDEO (CHDC-22SDHSC ONLY) These three RCA connectors are for analog Y, Pb, Pr component.

④

NO CONNECTION

⑤

S-VIDEO OUT (CHDC-22SDHSC ONLY) This is S-Video output.

⑥

HDMI OUT (CHDC-22SDHSC ONLY) This is HDMI output.

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg6

http://www.orionimages.com

Installation and User’s Guide

⑦ MULTI IN / OUT This is 9-pin multi-connect to use with a multi-port cable used for DC12V power and a serial control

⑧ CVBS OUT (CHDC-22SDHSC ONLY) This is NTSC / PAL output (BNC)

⑨ VIDEO OUTPUT CONNECTOR (VIDEO OUT) For HD-SDI output from camera. Connect this output to HDTV monitor or HDTV switcher, etc. This to be terminated with 75 ohms impedance at the last equipment in a loop when cascade / bridge loop connection is made.

7

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg7

Installation and User’s Guide

http://www.orionimages.com

6. OPERATION 6-1. USER SETUP The camera has a remote controller as standard to set up and various picture quality setups, back light compensation, Day/Night for optimum reproduction. The SETUP can be easily executed using the On-Screen-Menu system. Alteration of these function may be needed for some installations and we recommend that you should spend some time to become acquainted with these functions so that the best results can be obtained from this high performance HD CCTV camera.

6-2. SETUP SWITCHES AND FUNCTIONS

Operation distance: 10M When RC is on: Flickering on LED

Cancel setup value and Exit setup mode

Enter & function key

Move to Up, Down, Left, Right

Brightness

                 

8

Zoom In/Out

Resolution

Remote Controller

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg8

http://www.orionimages.com

Installation and User’s Guide

    6-3. ENTERING THE SETUP MODE AND ITS BASICS   Press ENT button on a remote controller to display the following OSD menu on the screen.                              

            6-3-1. VIDEO FORMAT   Press ENT button one time to move a cursor to TV type. Press ENT button one more time to move a   cursor to NTSC. Press button or button to select the format.     TV-Type : This NTSC (default) or PAL to select     Composite : SQUEEZE (16:9) default or crop (4:3)     SYNC TRIG : This is for sync trigger. This model does not support a trigger. Please stay at “OFF”

First Field :

9

Lower (default) or Upper

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg9

http://www.orionimages.com

Resolution :

Installation and User’s Guide

Select HD Output format (In 1920 x 1080 / 30p) out 1920 x 1080 / 30p (In 1920 x 1080 / 30p) out 1920 x 1080 / 30p (In 1280 x 720 / 60p) out 1280 x 720 / 60p (In 1280 x 720 / 30p) out 1280 x 720 / 30p (In 1920 x 1080 / 25p) out 1920 x 1080 / 25p (In 1920 x 1080 / 25p) out 1920 x 1080 / 50i (In 1280 x 720 / 50p) out 1280 x 720 / 50p

6-3-2. PICTURE CONTROL  

Press ENT button to adjust picture.

   

Brightness :

0 ~ 100 (default is 66) higher number increase brightness.

Sharpness :

Low , Middle (default) or High.

Hue :

Cr -> -2 ~ +2 (default is +1)

   

Cb -> -2 ~ +2 (default is +1)

Chroma :

Low, Middle or High (default is Low) Cb -> Low, Middle or High (default is Low)

6-3-3. BACK LIGHT This ON / OFF of Back Light Compensation. This should be ON when the object becomes dark due to highlight background.

6-3-4. DIGITAL EFFECT You can select the image at Normal, Negative, Solarization, Pasteurization, Monochrome, or sepia color.

6-3-5. SCENE Due to your environmental scene, you may need to set up this function like MODE ODD, High color Temperature, WDR (Wide Dynamic Range), AUTO, Night (without Auto change) or Night (with Auto change – Day / Night)

10

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg10

http://www.orionimages.com

Installation and User’s Guide

6-3-6. FLICKERNESS If you see a flicker on the screen, please use this function and select ON, ON (50Hz fixed) or ON (60Hz fixed).

6-3-7. WHITE BALANCE You may select Manual, Auto, (Tungsten, Fluorescent D, Fluorescent N, Fluorescent W, Shade or Cloudy) When selected “MANUAL”, you may need to select X/Y values.

6-3-8. NOISE REDUCTION You may select Low, Middle (default) or High.

6-3-9. AUTO SLOW SHUTTER It can be selected ON or OFF (default).

6-3-10. IMAGE STABILIZER It can be selected ON (default) or OFF.

6-3-11. MIRROR This function is to reverse top and bottom or left and right.

6-3-12. FOCUS MODE Auto or Manual can be selected.

11

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg11

Installation and User’s Guide

http://www.orionimages.com

6-3-13. OSD COLOR Color of OSD menu (Title, Menu, Sub menu or select) can be changed to WHITE, CYAN, MAZEN (Magenta), BLUE, YELLOW, GREEN RED, DGRAY (Dark Gray), GRAY, DCYAN, (Dark Cyan), DMAZE (Dark Magenta), DBLUE (Dark Blue), DYELL (Dark Yellow), DGREEN (Dark Green), BLACK, TRANS (Transparency).

6-3-14. OSD AUTO DISAPPEAR You can select Disable or Enable for OSD auto disappear function

6-3-15. SERIAL ID You can set your ID (number 1 ~ 7) and Baud rate (default is 19200). Please visit http://www.orionimages.com/product/CHDC-22SDC.asp to download a remote application software. (see figure 1.1 for application menu)

Figure 1.1 (Application Menu)

12

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg12

http://www.orionimages.com

Installation and User’s Guide

6-3-16. RESET Select “YES” to go back all settings to factory default.

6-3-17. EXIT Select either “SAVE & EXIT” or “EXIT WITHOUT SAVING” your camera set up.

13

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg13

http://www.orionimages.com

Installation and User’s Guide

7. APPLICATION OF OUTPUT

14

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg14

Installation and User’s Guide

http://www.orionimages.com

8. SPECIFICATIONS CHDC-22SDC & CHDC-22SDHSC Image Sensor

1/2.5” CMOS

Effective Pixel

2.2 M Pixel

Sync System

Internal HD-SDI (SMPTE 294M) / 75 ohm BNC x 1 1920 x 1080 30p / 25p / 60i, 1280 x 720 60p / 50p NTSC / PAL 1Vp-p / 75 ohm (CHDC-22SDHSC ONLY)

Video Output S-Video (CHDC-22SDHSC ONLY) Y, Pb, Pr Component (CHDC-22SDHSC ONLY) HDMI 1.3

(CHDC-22SDHSC ONLY)

Lens

1/3.6”, F=4.5 ~ 45mm, F1.8 ~ 2.2

Minimum Illumination

6 Lux (50 IRE)

Auto White Balance

Auto / Manual

Backlight Compensation

Built-In

Noise Reduction

Built-In

Auto Slow Shutter

Built-in / ON: 0.35 Lux

Image Stabilization

Built-In

Day & Night

Built-In

Mirror Image

Horizontal and Vertical

Power Requirement

DC 12V (Voltage Tolerance: 8V ~ 15V)

Power Consumption

Max 720mA

Operating Temperature

32° ~ 113° F (0° ~ 45° C)

Operating Humidity

20 ~ 80%

Camera Mount

1/4” ~ 20UNC x 1 (Top or Bottom)

Dimensions (W x H x D)

2.65” x 2.36” x 6.57”

Weight

1.06 lbs

* Design and specifications are subject to change without notice

15

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg15

http://www.orionimages.com

Installation and User’s Guide

9. OUTLINE DIMENSION Unit: mm

Side View

16

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

Front View

pg16

http://www.orionimages.com

Installation and User’s Guide

10. WARRANTY & AFTER-SALE SERVICE Warranty accompanies this product. Read and fill out the warranty card that you have received at your dealer. Keep this card in a safe place. z

Please consult ORION Images Corporation or your dealer for full warranty information. Your dealer will repair or replace free of charge within the warranty period according to the warranty coverage.

z

For repairs after the expiration of the warranty period, consult your dealer or sales representative. It will first be judged whether the fault is repairable or not. Charged servicing will then be made upon request of the user.

z

Before you ask for servicing, please ensure you read the instruction Manual. If the unit still fails, take note of the model number, date of purchase, problem, etc. In detail, and inform your dealer or sales representative.

z

If you have questions about the after-sale service, contact your dealer or sales representative. * We suggest you ask for preventive inspection as soon as possible.

Contact ORION Images : In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the installation. Address: 7300 Bolsa Avenue, Westminster, CA 92683 Tel: 714-766-6300

/

Fax: 714-766-6310

Email: [email protected] Website: http://www.orionimages.com

17

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg17

http://www.orionimages.com

18

Installation and User’s Guide

7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310

pg18