Chapter 8: Memory Management

Chapter 8: Memory Management  Background  Swapping  Contiguous Memory Allocation  Paging  Structure of the Page Table  Segmentation  Example: ...
Author: Lydia Patterson
7 downloads 1 Views 1MB Size
Chapter 8: Memory Management  Background  Swapping  Contiguous Memory Allocation

 Paging  Structure of the Page Table  Segmentation  Example: The Intel Pentium

Objectives  To provide a detailed description of various ways of

organizing memory hardware  To discuss various memory-management techniques,

including paging and segmentation  To provide a detailed description of the Intel Pentium, which

supports both pure segmentation and segmentation with paging

Background  Program must be brought (from disk) into memory and placed

within a process for it to be run  Main memory and registers are only storage CPU can access

directly  Register access in one CPU clock (or less)  Main memory can take many cycles  Cache sits between main memory and CPU registers  Protection of memory required to ensure correct operation

Base and Limit Registers  A pair of base and limit registers define the logical address space

Binding of Instructions and Data to Memory  Address binding of instructions and data to memory addresses

can happen at three different stages 

Compile time: If memory location known a priori, absolute code can be generated; must recompile code if starting location changes



Load time: Must generate relocatable code if memory location is not known at compile time



Execution time: Binding delayed until run time if the process can be moved during its execution from one memory segment to another. Need hardware support for address maps (e.g., base and limit registers)

Multistep Processing of a User Program

Logical vs. Physical Address Space  The concept of a logical address space that is bound to a

separate physical address space is central to proper memory management 

Logical address – generated by the CPU; also referred to as virtual address



Physical address – address seen by the memory unit

 Logical and physical addresses are the same in compile-time

and load-time address-binding schemes; logical (virtual) and physical addresses differ in execution-time address-binding scheme

Memory-Management Unit (MMU)  Hardware device that maps virtual to physical address  In MMU scheme, the value in the relocation register is added to

every address generated by a user process at the time it is sent to memory  The user program deals with logical addresses; it never sees the

real physical addresses

Dynamic relocation using a relocation register

Dynamic Loading  Routine is not loaded until it is called  Better memory-space utilization; unused routine is never loaded  Useful when large amounts of code are needed to handle

infrequently occurring cases  No special support from the operating system is required

implemented through program design

Dynamic Linking  Linking postponed until execution time  Small piece of code, stub, used to locate the appropriate

memory-resident library routine  Stub replaces itself with the address of the routine, and

executes the routine  Operating system needed to check if routine is in processes’

memory address  Dynamic linking is particularly useful for libraries

 System also known as shared libraries

Swapping 

A process can be swapped temporarily out of memory to a backing store, and then brought back into memory for continued execution



Backing store – fast disk large enough to accommodate copies of all memory images for all users; must provide direct access to these memory images



Roll out, roll in – swapping variant used for priority-based scheduling algorithms; lower-priority process is swapped out so higher-priority process can be loaded and executed



Major part of swap time is transfer time; total transfer time is directly proportional to the amount of memory swapped



Modified versions of swapping are found on many systems (i.e., UNIX, Linux, and Windows) System maintains a ready queue of ready-to-run processes which have memory images on disk



Schematic View of Swapping

Contiguous Allocation  Main memory usually into two partitions: 

Resident operating system, usually held in low memory with interrupt vector



User processes then held in high memory

 Relocation registers used to protect user processes from each

other, and from changing operating-system code and data 

Base register contains value of smallest physical address



Limit register contains range of logical addresses – each logical address must be less than the limit register



MMU maps logical address dynamically

Hardware Support for Relocation and Limit Registers

Contiguous Allocation (Cont)  Multiple-partition allocation 

Hole – block of available memory; holes of various size are scattered throughout memory



When a process arrives, it is allocated memory from a hole large enough to accommodate it



Operating system maintains information about: a) allocated partitions b) free partitions (hole)

OS

OS

OS

OS

process 5

process 5

process 5

process 5

process 9

process 9

process 8 process 2

process 10 process 2

process 2

process 2

Dynamic Storage-Allocation Problem How to satisfy a request of size n from a list of free holes  First-fit: Allocate the first hole that is big enough  Best-fit: Allocate the smallest hole that is big enough; must search

entire list, unless ordered by size 

Produces the smallest leftover hole  Worst-fit: Allocate the largest hole; must also search entire list  Produces the largest leftover hole

First-fit and best-fit better than worst-fit in terms of speed and storage utilization

Fragmentation  External Fragmentation – total memory space exists to satisfy a

request, but it is not contiguous  Internal Fragmentation – allocated memory may be slightly larger

than requested memory; this size difference is memory internal to a partition, but not being used  Reduce external fragmentation by compaction 

Shuffle memory contents to place all free memory together in one large block



Compaction is possible only if relocation is dynamic, and is done at execution time



I/O problem 

Latch job in memory while it is involved in I/O



Do I/O only into OS buffers

Paging  Logical address space of a process can be noncontiguous;

process is allocated physical memory whenever the latter is available  Divide physical memory into fixed-sized blocks called frames

(size is power of 2, between 512 bytes and 8,192 bytes)  Divide logical memory into blocks of same size called pages

 Keep track of all free frames  To run a program of size n pages, need to find n free frames

and load program  Set up a page table to translate logical to physical addresses  Internal fragmentation

Address Translation Scheme 

Address generated by CPU is divided into: 

Page number (p) – used as an index into a page table which contains base address of each page in physical memory



Page offset (d) – combined with base address to define the physical memory address that is sent to the memory unit

page number



page offset

p

d

m-n

n

For given logical address space 2m and page size 2n

Paging Hardware

Paging Model of Logical and Physical Memory

Paging Example

32-byte memory and 4-byte pages

Free Frames

Before allocation

After allocation

Implementation of Page Table  Page table is kept in main memory  Page-table base register (PTBR) points to the page table  Page-table length register (PRLR) indicates size of the

page table  In this scheme every data/instruction access requires two

memory accesses. One for the page table and one for the data/instruction.  The two memory access problem can be solved by the use

of a special fast-lookup hardware cache called associative memory or translation look-aside buffers (TLBs)  Some TLBs store address-space identifiers (ASIDs) in

each TLB entry – uniquely identifies each process to provide address-space protection for that process

Associative Memory  Associative memory – parallel search Page #

Frame #

Address translation (p, d) 

If p is in associative register, get frame # out



Otherwise get frame # from page table in memory

Paging Hardware With TLB

Effective Access Time  Associative Lookup =  time unit  Assume memory cycle time is 1 microsecond  Hit ratio – percentage of times that a page number is found in the

associative registers; ratio related to number of associative registers  Hit ratio =   Effective Access Time (EAT)

EAT = (1 + )  + (2 + )(1 – ) =2+–

Memory Protection  Memory protection implemented by associating protection bit

with each frame  Valid-invalid bit attached to each entry in the page table: 

―valid‖ indicates that the associated page is in the process’ logical address space, and is thus a legal page



―invalid‖ indicates that the page is not in the process’ logical address space

Valid (v) or Invalid (i) Bit In A Page Table

Shared Pages  Shared code 

One copy of read-only (reentrant) code shared among processes (i.e., text editors, compilers, window systems).



Shared code must appear in same location in the logical address space of all processes

 Private code and data 

Each process keeps a separate copy of the code and data



The pages for the private code and data can appear anywhere in the logical address space

Shared Pages Example

Structure of the Page Table  Hierarchical Paging  Hashed Page Tables  Inverted Page Tables

Hierarchical Page Tables  Break up the logical address space into multiple page tables  A simple technique is a two-level page table

Two-Level Page-Table Scheme

Two-Level Paging Example 





A logical address (on 32-bit machine with 1K page size) is divided into: 

a page number consisting of 22 bits



a page offset consisting of 10 bits

Since the page table is paged, the page number is further divided into: 

a 12-bit page number



a 10-bit page offset

Thus, a logical address is as follows:

page number pi 12

page offset

p2

d

10

10

where pi is an index into the outer page table, and p2 is the displacement within the page of the outer page table

Address-Translation Scheme

Three-level Paging Scheme

Hashed Page Tables  Common in address spaces > 32 bits  The virtual page number is hashed into a page table 

This page table contains a chain of elements hashing to the same location

 Virtual page numbers are compared in this chain searching for a

match 

If a match is found, the corresponding physical frame is extracted

Hashed Page Table

Inverted Page Table  One entry for each real page of memory  Entry consists of the virtual address of the page stored in

that real memory location, with information about the process that owns that page  Decreases memory needed to store each page table, but

increases time needed to search the table when a page reference occurs  Use hash table to limit the search to one — or at most a

few — page-table entries

Inverted Page Table Architecture

Segmentation  Memory-management scheme that supports user view of memory  A program is a collection of segments 

A segment is a logical unit such as:

main program procedure function method object local variables, global variables common block stack symbol table arrays

User’s View of a Program

Logical View of Segmentation 1 4

1

2

3 4

2 3

user space

physical memory space

Segmentation Architecture  Logical address consists of a two tuple:

,  Segment table – maps two-dimensional physical addresses;

each table entry has: 

base – contains the starting physical address where the segments reside in memory



limit – specifies the length of the segment

 Segment-table base register (STBR) points to the segment

table’s location in memory  Segment-table length register (STLR) indicates number of

segments used by a program; segment number s is legal if s < STLR

Segmentation Architecture (Cont.)  Protection 

With each entry in segment table associate: 

validation bit = 0  illegal segment



read/write/execute privileges

 Protection bits associated with segments; code sharing

occurs at segment level  Since segments vary in length, memory allocation is a

dynamic storage-allocation problem  A segmentation example is shown in the following diagram

Segmentation Hardware

Example of Segmentation

Example: The Intel Pentium  Supports both segmentation and segmentation with paging  CPU generates logical address 

Given to segmentation unit 



Which produces linear addresses

Linear address given to paging unit 

Which generates physical address in main memory



Paging units form equivalent of MMU

Logical to Physical Address Translation in Pentium

Intel Pentium Segmentation

Pentium Paging Architecture

Linear Address in Linux Broken into four parts:

Three-level Paging in Linux

End of Chapter 8