Chain Drives
08
Chain Drives
08 198
Renold Transmission Chain ™
High Performance
Chain Drives
18
Premier Standard
All Purpose Chain
Maintenance Free
Stainless Steel
Corrosion Resistant
Hydro-Service
Corrosion Resistant
™
Sovereign
Abrasion Resistant
Roll-Ring
Chain Tensioner
™
™
Contact Brammer on 0870 240 2100
Chain Drives
199
Unique high performance chain
8
Up to 6 times longer working life
Chain Drives
BS CHAIN SIZES
Unbeatable wear and fatigue resistance
Designed to deliver maximum return
Initial wear life improved by 50%
Improved fatigue resistance Plate and connecting link design optimizes stress distribution and fatigue performance. Synergy® performs, on average, 30 percent better than other brands under repeated shock loading and continual heavy loads.
Better wear resistance Independent tests show Renold Synergy® performed up to six times better than the highest quality competitor’s chain.
Built to perform Each component of Renold Synergy® is engineered to perfection using cutting edge design tools such as Finite Element Analysis (FEA). It all adds up to chain performance that exceeds the sum of its parts.
BS CHAIN SIZES
Simplex
200
Connecting links
Brammer BS Order Code
ISO No.
Pitch inch
26
107
110038X10FT:REN 110046X10FT:REN 110056X10FT:REN 110066X10FT:REN 110088X10FT:REN 110106X10FT:REN 110127X10FT:REN
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer BS Order Code
ISO No.
Pitch inch
26
107
114038X10FT:REN 114046X10FT:REN 114056X10FT:REN 114066X10FT:REN 114088X10FT:REN 114106X10FT:REN 114127X10FT:REN
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
-
Everything you need – when you need it – Tel: 0870 240 2100
S30
ANSI CHAIN SIZES
Unique high performance chain
Up to 6 times longer working life
Unbeatable wear and fatigue resistance
Designed to deliver maximum return
Initial wear life improved by 50%
Improved fatigue resistance Plate and connecting link design optimizes stress distribution and fatigue performance. Synergy® performs, on average, 30 percent better than other brands under repeated shock loading and continual heavy loads.
Better wear resistance Independent tests show Renold Synergy® performed up to six times better than the highest quality competitor’s chain.
Chain Drives
18
Built to perform Each component of Renold Synergy® is engineered to perfection using cutting edge design tools such as Finite Element Analysis (FEA). It all adds up to chain performance that exceeds the sum of its parts.
ANSI CHAIN SIZES
Simplex
Connecting links
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
129037X10FT:REN 119047X10FT:REN 119057X10FT:REN 119067X10FT:REN 119087X10FT:REN 119107X10FT:REN 119127X10FT:REN
35-1 40-1 50-1 60-1 80-1 100-1 120-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
125037X10FT:REN 115047X10FT:REN 115057X10FT:REN 115067X10FT:REN 115087X10FT:REN 115107X10FT:REN 115127X10FT:REN
35-2 40-2 50-2 60-2 80-2 100-2 120-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
-
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
Contact Brammer on 0870 240 2100
S30
Chain Drives
201
Our leading standard steel transmission chain
8
Excellent wear resistance
Chain Drives
BS CHAIN SIZES
Wide waisted GP plate shape
Fatigue performance rated as ISO + 60%
Guarantee of 15,000 hours
End-softened, spin riveted pin for easy cutting
3/8” to 4” pitch, simplex & duplex
Renold’s unique control over pin / bush contact makes sure that wear life exceeds other brands. Little initial chain adjustment is therefore required. Renold roller chain is highly fatigue resistant, giving up to four times the
life of other leading competitor chains. Breaking loads exceed the minimum requirements of the international standards. Renold’s end-softened pin and spin rivet help to minimise downtime. All
you need is a Renold pin extractor and you can disassemble Renold roller chain in seconds; no need to grind the head of the pin, no need for lengthy downtime.
BS CHAIN SIZES
Simplex
202
Connecting links
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-1x10FT:REN 08B-1x10FT:REN 10B-1x10FT:REN 12B-1x10FT:REN 16B-1x10FT:REN 20B-1x10FT:REN 24B-1x10FT:REN
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-2x10FT:REN 08B-2x10FT:REN 10B-2x10FT:REN 12B-2x10FT:REN 16B-2x10FT:REN 20B-2x10FT:REN 24B-2x10FT:REN
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
-
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
S30
ANSI CHAIN SIZES
Our leading standard steel transmission chain
Excellent wear resistance
Wide waisted GP plate shape
Fatigue performance rated as ISO + 60%
Guarantee of 15,000 hours
End-softened, spin riveted pin for easy cutting
3/8” to 4” pitch, simplex & duplex
Renold’s unique control over pin / bush contact makes sure that wear life exceeds other brands. Little initial chain adjustment is therefore required. Renold roller chain is highly fatigue resistant, giving up to four times the
Chain Drives
18
life of other leading competitor chains. Breaking loads exceed the minimum requirements of the international standards. Renold’s end-softened pin and spin rivet help to minimise downtime. All
you need is a Renold pin extractor and you can disassemble Renold roller chain in seconds; no need to grind the head of the pin, no need for lengthy downtime.
ANSI CHAIN SIZES
Simplex
Connecting links
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
35-1X10FT:REN 40-1X10FT:REN 50-1X10FT:REN 60-1X10FT:REN 80-1X10FT:REN 100-1X10FT:REN 120-1X10FT:REN
35-1 40-1 50-1 60-1 80-1 100-1 120-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
35-2X10FT:REN 40-2X10FT:REN 50-2X10FT:REN 60-2X10FT:REN 80-2X10FT:REN 100-2X10FT:REN 120-2X10FT:REN
35-2 40-2 50-2 60-2 80-2 100-2 120-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
Contact Brammer on 0870 240 2100
-
S30
Chain Drives
203
Solid extruded bush
8
Solid extruded roller
Chain Drives
BS CHAIN SIZES
High waisted plates
Wedge riveting
Hardened and shot-peened plates
Comprehensive European (BS) and ANSI standard ranges
Renold A&S Roller Chain Renold A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation for its excellent wear resistance, high fatigue resistance and durability and these factors have helped A&S become the most widely used chain brand in Europe.
More than just a chain With its reliability and performance, A&S roller chain significantly contributes to reduced downtime and maintenance and has the ability to meet the needs of diverse applications and the continuously increasing demands of industry. To make sure that A&S chain keeps up with these
increasing demands, a series of upgrades ensure that the range now offers even more performance benefits. Available in European (BS) and ANSI standard, A&S chain is available with a choice of lubricant to meet customer’s specific requirements.
BS CHAIN SIZES
Simplex
204
Connecting links
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-1X10FT:AS 08B-1X10FT:AS 10B-1X10FT:AS 12B-1X10FT:AS 16B-1X10FT:AS 20B-1X10FT:AS 24B-1X10FT:AS
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-2X10FT:AS 08B-2X10FT:AS 10B-2X10FT:AS 12B-2X10FT:AS 16B-2X10FT:AS 20B-2X10FT:AS 24B-2X10FT:AS
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
-
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
S30
ANSI CHAIN SIZES
Solid extruded bush
Solid extruded roller
High waisted plates
Wedge riveting
Hardened and shot-peened plates
Comprehensive European (BS) and ANSI standard ranges
Renold A&S Roller Chain Renold A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation for its excellent wear resistance, high fatigue resistance and durability and these factors have helped A&S become the most widely used chain brand in Europe.
Chain Drives
18
More than just a chain With its reliability and performance, A&S roller chain significantly contributes to reduced downtime and maintenance and has the ability to meet the needs of diverse applications and the continuously increasing demands of industry. To make sure that A&S chain keeps up with these
increasing demands, a series of upgrades ensure that the range now offers even more performance benefits. Available in European (BS) and ANSI standard, A&S chain is available with a choice of lubricant to meet customer’s specific requirements.
ANSI CHAIN SIZES
Simplex
Connecting links
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
35-1X10FT:AS 40-1X10FT:AS 50-1X10FT:AS 60-1X10FT:AS 80-1X10FT:AS 100-1X10FT:AS 120-1X10FT:AS
35-1 40-1 50-1 60-1 80-1 100-1 120-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
35-2X10FT:AS 40-2X10FT:AS 50-2X10FT:AS 60-2X10FT:AS 80-2X10FT:AS 100-2X10FT:AS 120-2X10FT:AS
35-2 40-2 50-2 60-2 80-2 100-2 120-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
-
Contact Brammer on 0870 240 2100
S30
Chain Drives
205
BS CHAIN SIZES
Chain Drives
8
No lubrication normally required
Outside of chain totally dry-to-the-touch
Nickel-plated plates
Food industry-approved lubricant within sintered bush
Unique food industry-approved roller coating
Dimensionally interchangeable with standard chain
ISO standard pin diameter, therefore standard attachments on outer links
For use in hygiene-sensitive applications or situations where contamination from lubricant is to be avoided, Renold Syno chain displays all the characteristics you need from a chain. With a food industryapproved lubricant within the sintered bush, this chain will in almost all instances not need relubricating. The roller coating is also suitable for use in the food industry; a unique feature on any chain.
Available in boxed 10-foot lengths from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter, this means that Renold Syno chain is dimensionally interchangeable with standard roller chain and is even compatible with standard sprockets. With the kind of excellent wear and fatigue resistance that you expect from a Renold
chain, Syno chain outlasts any competitor product promoted as low-lube or non-lube. Already tried and tested by major companies in the food sector and elsewhere, if you have to operate with minimal lubrication but can’t compromise on performance, we can boost your productivity, cut your downtime and save you time and money.
BS CHAIN SIZES
Simplex
206
Connecting links
Brammer BS Order Code
ISO No.
Pitch inch
26
107
110438X10FT:REN 110446X10FT:REN 110456X10FT:REN 110466X10FT:REN 110488X10FT:REN 110506X10FT:REN 110527X10FT:REN
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer BS Order Code
ISO No.
Pitch inch
26
107
11
114438X10FT:REN 114446X10FT:REN 114456X10FT:REN 114466X10FT:REN 114488X10FT:REN 114506X10FT:REN 114527X10FT:REN
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
S11/S58
S26
S107
S12
Duplex
Connecting links
We work harder to save you money and downtime – Tel: 0870 240 2100
S30
ANSI CHAIN SIZES
No lubrication normally required
Outside of chain totally dry-to-the-touch
Nickel-plated plates
Food industry-approved lubricant within sintered bush
Unique food industry-approved roller coating
Dimensionally interchangeable with standard chain
ISO standard pin diameter, therefore standard attachments on outer links
For use in hygiene-sensitive applications or situations where contamination from lubricant is to be avoided, Renold Syno chain displays all the characteristics you need from a chain. With a food industryapproved lubricant within the sintered bush, this chain will in almost all instances not need relubricating. The roller coating is also suitable for use in the food industry; a unique feature on any chain.
Available in boxed 10-foot lengths from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter, this means that Renold Syno chain is dimensionally interchangeable with standard roller chain and is even compatible with standard sprockets. With the kind of excellent wear and fatigue resistance that you expect from a Renold
Chain Drives
18
chain, Syno chain outlasts any competitor product promoted as low-lube or non-lube. Already tried and tested by major companies in the food sector and elsewhere, if you have to operate with minimal lubrication but can’t compromise on performance, we can boost your productivity, cut your downtime and save you time and money.
ANSI CHAIN SIZES
Simplex
Connecting links
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
11
119443X10FT:REN 119453X10FT:REN 119463X10FT:REN 119483X10FT:REN
40-1 50-1 60-1 80-1
0.500 0.625 0.750 1.000
-
-
Brammer ANSI Order Code
ANSI No.
Pitch inch
26
107
11
115443X10FT:REN 115453X10FT:REN 115463X10FT:REN 115483X10FT:REN
40-2 50-2 60-2 80-2
0.500 0.625 0.750 1.000
-
12
30
12
30
S11/S58
S26
S107
S12
Duplex
Connecting links
S30
Contact Brammer on 0870 240 2100
Chain Drives
207
Renold Hydro-Service® Superior corrosion resistance for chain BS CHAIN SIZES Superior corrosion resistance Last as much as 30 times longer than standard carbon steel
8 Chain Drives
Hexavalent chrome free 350 hours corrosion protection during salt spray tests to
DIN 50021 Cold extruded, solid bush and roller delivering maximum
Renold performance Plates and rollers shot peened to our exact specifications Wear and fatigue resistance that delivers maximum working life Lubrication that improves wear performance
Renold Hydro-Service chain delivers superior corrosion resistance, lasting as much as 30 times longer than standard carbon steel in applications that have to deal with water or salt spray. It is ideal for wash-down environments.
Hydro-Service chain is also more economical, and stronger, than stainless steel. Each component is mechanically treated prior to assembly to ensure
consistent, secure protection. The surface treatment is free of hexavalent chrome, complying with legislation relating to environmental and health & safety considerations.
BS CHAIN SIZES
Simplex
208
Connecting links
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-1HSx10FT:REN 08B-1HSx10FT:REN 10B-1HSx10FT:REN 12B-1HSx10FT:REN 16B-1HSx10FT:REN 20B-1HSx10FT:REN 24B-1HSx10FT:REN
06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
Brammer BS Order Code
ISO No.
Pitch inch
26
107
06B-2HSx10FT:REN 08B-2HSx10FT:REN 10B-2HSx10FT:REN 12B-2HSx10FT:REN 16B-2HSx10FT:REN 20B-2HSx10FT:REN 24B-2HSx10FT:REN
06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
-
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links 11
-
FREE 24/7 technical support – Tel: 0870 240 2100
S30
Renold Hydro-Service® Superior corrosion resistance for chain ANSI CHAIN SIZES Superior corrosion resistance Last as much as 30 times longer than standard carbon steel
18 Chain Drives
Hexavalent chrome free 350 hours corrosion protection during salt spray tests to
DIN 50021 Cold extruded, solid bush and roller delivering maximum
Renold performance Plates and rollers shot peened to our exact specifications Wear and fatigue resistance that delivers maximum working life Lubrication that improves wear performance
Renold Hydro-Service chain delivers superior corrosion resistance, lasting as much as 30 times longer than standard carbon steel in applications that have to deal with water or salt spray. It is ideal for wash-down environments.
Hydro-Service chain is also more economical, and stronger, than stainless steel. Each component is mechanically treated prior to assembly to ensure
consistent, secure protection. The surface treatment is free of hexavalent chrome, complying with legislation relating to environmental and health & safety considerations.
ANSI CHAIN SIZES
Simplex
Brammer ANSI Order Code
ANSI No.
Pitch inch
35-1HSx10FT:REN 40-1HSx10FT:REN 50-1HSx10FT:REN 60-1HSx10FT:REN 80-1HSx10FT:REN 100-1HSx10FT:REN 120-1HSx10FT:REN
35-1 40-1 50-1 60-1 80-1 100-1 120-1
0.375 0.500 0.625 0.750 1.000 1.250 1.500
Brammer ANSI Order Code
ANSI No.
Pitch inch
06B-2HSx10FT:REN 08B-2HSx10FT:REN 35-2HSx10FT:REN 40-2HSx10FT:REN 50-2HSx10FT:REN 60-2HSx10FT:REN 80-2HSx10FT:REN
35-2 40-2 50-2 60-2 80-2 100-2 120-2
0.375 0.500 0.625 0.750 1.000 1.250 1.500
Connecting links 26
107
26
107
11
12
30
12
30
-
S11/S58
S26
S107
S12
Duplex
Connecting links
11
Contact Brammer on 0870 240 2100
-
S30
Chain Drives
209
Roll-Ring® Chain Tensioner
Revolutionary chain tensioner
8
Installed in seconds and self adjusting
Chain Drives
BS CHAIN SIZES
Maintenance free
Works on simplex, duplex & triplex chain
Available in a wide range of pitch sizes
Also acts as noise damper
BS CHAIN SIZES
The Innovative Tensioner The innovative prize winning Roll-Ring chain tensioner is based on new principles and represents a major advance in technology.
210
Roll-Ring is an innovative chain tensioner made from a specially formulated polymer. The unique design is based upon a toothed ring that can be fitted to horizontal, vertical or diagonal drives in a matter of seconds, simply by placing it in-between the two strands of chain.
When the drive is in use, the Roll-Ring deforms to an elliptical shape, due to the compression between the strands and completely absorbs any slack in the system. Roll-Ring performs the job of a tensioner and a damper in one, and is ideally suited to applications where maintenance is difficult or impossible.
Part No.
ISO No.
Teeth
Part No.
ISO No.
Teeth
Part No.
ISO No.
Teeth
105 030 01 106 030 01 106 036 01 108 026 01 108 030 01 108 034 01 108 430 01 110 026 01 110 030 01 110 034 01 112 026 01 112 030 01 112 034 01 116 026 01 116 030 01 120 030 01
ISO 05 ISO 06 ISO 06 ISO 08 ISO 08 ISO 08 * ISO 10 ISO 10 ISO 10 ISO 12 ISO 12 ISO 12 ISO 16 ISO 16 ISO 20
30 30 36 26 30 34 30 26 30 34 26 30 34 26 30 30
106 030 06 108 026 06 108 030 06 108 430 06 110 026 06 110 030 06 112 026 06 112 030 06 116 026 06 116 030 06
ISO 06 ISO 08 ISO 08 * ISO 10 ISO 10 ISO 12 ISO 12 ISO 16 ISO 16
30 26 30 30 26 30 26 30 26 30
106 030 08 108 026 08 108 030 08 108 430 08 110 026 08 110 030 08 112 026 08 112 030 08 116 026 08 116 030 08
ISO 06 ISO 08 ISO 08 * ISO 10 ISO 10 ISO 12 ISO 12 ISO 16 ISO 16
30 26 30 30 26 30 26 30 26 30
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
Roll-Ring® Chain Tensioner ANSI CHAIN SIZES
Revolutionary chain tensioner
Installed in seconds and self adjusting
Maintenance free
Works on simplex, duplex & triplex chain
Available in a wide range of pitch sizes
Also acts as noise damper
ANSI CHAIN SIZES
The Innovative Tensioner The innovative prize winning Roll-Ring chain tensioner is based on new principles and represents a major advance in technology.
Roll-Ring is an innovative chain tensioner made from a specially formulated polymer. The unique design is based upon a toothed ring that can be fitted to horizontal, vertical or diagonal drives in a matter of seconds, simply by placing it in-between the two strands of chain.
Chain Drives
18
When the drive is in use, the Roll-Ring deforms to an elliptical shape, due to the compression between the strands and completely absorbs any slack in the system. Roll-Ring performs the job of a tensioner and a damper in one, and is ideally suited to applications where maintenance is difficult or impossible.
Part No.
ISO No.
Teeth
Part No.
ISO No.
Teeth
Part No.
ISO No.
Teeth
106 030 01 108 026 01 108 030 01 108 034 01 108 430 01 110 026 01 110 030 01 110 034 01 112 026 01 112 030 01 112 034 01 116 026 01 116 030 01 120 030 01
ISO 35 ISO 40 ISO 40 ISO 40 * ISO 50 ISO 50 ISO 50 ISO 60 ISO 60 ISO 60 ISO 80 ISO 80 ISO 100
30 30 30 30 30 30 30 30 30 30 30 30 30 30
106 030 06 108 026 06 108 030 06 108 430 06 110 026 06 110 030 06 112 026 06 112 030 06 116 026 06 116 030 06
ISO 35 ISO 40 ISO 40 * ISO 50 ISO 50 ISO 60 ISO 60 ISO 80 ISO 80
30 26 30 30 26 30 26 30 26 30
106 030 08 108 026 08 108 030 08 108 430 08 110 026 08 110 030 08 112 026 08 112 030 08 116 026 08 116 030 08
ISO 35 ISO 40 ISO 40 * ISO 50 ISO 50 ISO 60 ISO 60 ISO 80 ISO 80
30 26 30 30 26 30 26 30 26 30
Contact Brammer on 0870 240 2100
Chain Drives
211
Renold Conveyor Chain
Chain Drives
8
Standard stock range of BS conveyor chain, available ex-stock. 3,000 to 30,000lb chains produced in our dedicated UK manufacturing cell.
• Fast availability of standard integral attachments
212
• Standard cast iron sprockets available ex-stock
• Supporting this standard range we also have the capability to supply specials and customdesigned products.
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
THE COMPREHENSIVE POWER TRANSMISSION PRODUCTS PROVIDER Chain
Gears
Couplings
Services & Exclusive Technologies
Design and Manufacturing Expertise
• Technical support helpline - Advice on selection, calculations based on your application • Online chain selector • Onsite technical advice - Installation assistance / supervision • SmartProducts: unique wear and load monitoring technology exclusive to Renold • Roll-Ring chain tensioner, fit it in seconds • Attachment chain service - Quick turnaround, wide range of stock attachments • Online training information and guidance
• The ability to respond to individual customer needs with bespoke designs • An unrivalled depth of knowledge and experience in chain manufacturing
Check out our Chain Selector www.renoldchainselector.com
18 Chain Drives
A GROUP OVERVIEW
Comprehensive Range • Market-leading range of standard chain • Solution products designed with application and environmental requirements in mind – see the product listing opposite.
See How to Cut Chain Easily www.renoldpinextractor.com
Contact Brammer on 0870 240 2100
Chain Drives
2213
Chain Drives
8
Tsubakimoto is the world’s premier manufacturer of power transmission products including high quality ANSI and BS roller, conveyor and engineering chains and associated products such as cam clutches and linear actuators. It spends more on R&D than any other chain manufacturer in the world and offers the highest levels of engineering in all of its products. Tsubaki believes that reliability is the key to productivity and profitability, which is why it manufactures chain which is designed
214
to outperform the competition in even the harshest of industrial environments. This meets its Eco Eco philosophy of offering economical and ecological benefits to its customers with every single sale. The company has a global network of production and storage facilities which all operate on a policy of economical and ecological efficiency. This is most notable in its flagship Kyotanabe Plant in Japan which is responsible for developing new chain technologies and manufacturing product for distribution globally. Tsubaki aims to be a leading company in the global markets for its products and plans to achieve this through excellence in manufacturing for customers around the world. It offers the best value to customers around the world by capitalising on its technical strengths in power transmission products and material handling systems.
We work harder to save you money and downtime – Tel: 0870 240 2100
Roller Chain Guide Start your product selection here
SS
Coated Steel or Stainless Steel Chain?
Yes
Attachment Chain
Do you require corrosion resistance?
CS
Yes
Are you able to lubricate?
No
No
Do you require corrosion resistance?
Yes
Coated Steel or Stainless Steel Chain?
No
Chain: GT4 WINNER is the most advanced chain in the European market. Unique features are solid bushing with lubrication grooves, ring coined connecting links, and centre sink pin for easy dissassembly. Typical applications: Suitable for all general applications.
CS
SS
18 Chain Drives
Roller Chain
Chain: Tsubaki is the pioneer in developing lube free chain. Lambda features an oil impregnated bush in combination with a special coated pin for long-term internal lubrication is the secret to Lambda’s economic long life and wear resistance. This chain also comes with our standard features such as ring coined connecting links and easy break style pin head. Typical applications: Food, Packaging, Printing, Sawmill, Textile. Limitations: Max. Temp. 150degC, Max. Speed 50-160m/min *
Limitations: Application specific, please contact Tsubaki * ANSI
3&&KDLQ (QJLQHHULQJSODVWLF FRPELQDWLRQFKDLQ Chain: Tsubaki G7 ANSI chain features the same benefits as our BS GT4 WINNER chain such solid bushing and lube grooves to increase chain life by reducing wear. The G7 chain also offers an increased kW rating.
Chain: Plastic combination chain uses a stainless steel outer link, and a resilient plastic inner link to reduce weight and improve wear life without lubrication. A clean and long lasting alternative to stainless steel chain.
Typical applications: Suitable for all general applications.
Typical applications: Food, Pharmaceutical, Packaging, Healthcare.
Limitations: Application specific, please contact Tsubaki *
Limitations: Max. Temp. range -20 to 80degC, Max. Speed 70m/min.
Need more capacity?
1(3 1HZ(QYLURQPHQWDO3ODWLQJ Chain: Tsubaki NEP chain is coated to give high corrosion protection to carbon steel chain. The chain is eco-friendly and meets RoHS requirements, whilst maintaining 100% the strength of the chain. Typical applications: Food, Packaging, Utilities. Limitations: Application specific, please contact Tsubaki *
LAMBDA N.E.P. Chain: Plastic combination chain uses a stainless steel outer link, and a resilient plastic inner link to reduce weight and improve wear life without lubrication. A clean and long lasting alternative to stainless steel chain. Typical applications: Food, Packaging, Utilities. Limitations: Avoid heavy water contact.
Stainless Steel Chain Chain: Tsubaki leads the stainless steel chain range with our standard SUS304 grade, a higher transmission capacity is achieved by our precipitation hardened AS grade, and special SUS316 NS grade offers the highest corrosion resistance in stainless steel chains. Typical applications: Food, Packaging, Medical.
Heavy & SUPER Series Chain: Tsubaki Heavy and SUPER series chains offer increased transmission capacity, whilst remaining compatible with ANSI standard sprockets. Special treatments such as ball drifting, quad riveting, and shot peening are used to increase fatigue resistance. Typical applications: Lifting, construction and aggregate industries. Limitations: Application specific, please contact Tsubaki *
Limitations: Lower transmission capacity than equivalent steel chain. * Contact Tsubaki as the application requires further investigation.
Contact Brammer on 0870 240 2100
Chain Drives
215
TSUBAKI GT4 Winner: Standard Roller Chain TSUBAKI, the world’s largest and most advanced manufacturer of chain has
8
BS/DIN standard roller
Chain Drives
released a new 4th generation chain. The latest generation chain, branded Tsubaki GT4 Winner hosts a number of manufacturing and material developments. Repeated testing and field data indicate that wear between the bearing parts is a primary limiting factor in overall chain life, particularly in externally lubricated chain types such as BS/DIN standard roller chain. TSUBAKI has committed significant amounts of research and development to making improvements in this area, to reduce wear and chain elongation over a longer period of time-even for standard drive roller chain.
Four Key Features 1. Pre Lubrication Lube Groove (LG) TSUBAKI’s new BS/DIN series roller chain utilise a new production technique to manufacture a seamless bush with grooves incorporated on the inner surface. The lubegrooved (LG) bush holds oil at the point of contact where the chain needs it most, providing an internal reservoir for lubricant. The result is a chain that lasts longer with lower maintenance costs over the lifetime of the chain.
216
2. Seamless Bush > Perfectly Cylindrical The new Tsubaki BS/DIN series chain has a seamless bush with a very precise cylindrical profile and surface finish resulting in better surface contact between the pin and bush along with improved lubricant retention. 3. Easy dis-assembly > Centre Sink Rivet With Tsubaki’s design of rivet head the chain is easily dis-assembled with an additional benefit being that in the event of the chain being overloaded, the markings on the rivet head will identify pin rotation.
4. Increased Transmission Capacity > Ring Coining The Ring Coined connecting link allows the chain to be specified up to its full kW rating. The precision and strength achieved on these components is far beyond that of competitor’s offerings. The typical standard slip-fit connecting link is usually much weaker than the other links. Tsubaki’s Ring Coin technology has overcome that.
CO2 Reduction Tsubaki takes its environmental responsibility very seriously in its state-of-the-art production facilities. The new BS/DIN series chain contributes significantly to reducing CO2 emissions due to the greatly extended replacement frequency.
FREE 24/7 technical support – Tel: 0870 240 2100
T
L2
d1
b1
pt
T d2
t
L1
L2
b1
L1
t
%6*7:,11(567$1'$5'52//(5&+$,1
H
d2
d1
p
18 L1
pt
T
b1
pt
L2
L1
L
t
Chain Drives
L1
p
d2
OL
d1
2POL
*7:LQQHU 'LPHQVLRQVLQPP 3LQ
768%$., &KDLQ1R 05B-1:TSUB 56% 05B-2:TSUB 56% 05B-3:TSUB 56% 06B-1:TSUB 5)% 06B-2:TSUB 5)% 06B-3:TSUB 5)% 08B-1:TSUB 56% 08B-2:TSUB 56% 08B-3:TSUB 56% 10B-1:TSUB 56% 10B-2:TSUB 56% 10B-3:TSUB 56% 12B-1:TSUB 56% 12B-2:TSUB 56% 12B-3:TSUB 56% 16B-1:TSUB 56% 16B-2:TSUB 56% 16B-3:TSUB 56% 20B-1:TSUB 56% 20B-2:TSUB 56% 20B-3:TSUB 56% 24B-1:TSUB 56% 24B-H-1:TSUB 56%+ 24B-2:TSUB 56% 24B-3:TSUB 56% 28B-1:TSUB 56% 28B-2:TSUB 56% 28B-3:TSUB 56% 32B-1:TSUB 56% 32B-2:TSUB 56% 32B-3:TSUB 56% 40B-1:TSUB 56% 40B-2:TSUB 56% 40B-3:TSUB 56% 48B-1:TSUB 56% 48B-2:TSUB 56% 48B-3:TSUB 56%
/LQN3ODWH
3LWFK
5ROOHU 'LDPHWHU
,QQHU :LGWK
'LDPHWHU
/HQJWK
/HQJWK
/HQJWK
S
G
E
G
/
/
/
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
7KLFNQHVV 7KLFNQHVV
+HLJKW
7
W
+ PD[
0LQ 7HQVLOH 6WUHQJWK 7UDQVYHUVH DFFWR ,62 3LWFK SW
N1
0LQ 7HQVLOH $Y7HQVLOH 6WUHQJWK 6WUHQJWK DFFWR $SSUR[ DFFWR 7VXEDNL 0DVV 7VXEDNL N1
N1
NJP
1RWH &RQQHFWLQJOLQNVDUHFOLSW\SHIRUVL]HVXSWR56%DQGFRWWHUW\SHIRUVL]HV56%WR56% 5)%FKDLQKDVIODWVKDSHGOLQNSODWHV ,QWHUPHGLDWHSODWHRIPXOWLVWUDQG5)%DQG56%FKDLQLVDVROLGSODWH &HQWHUVLQNULYHWLQJLVDSSOLHGWR56%WR56%VLQJOHVWUDQGFKDLQ 'RXEOHVWDNHULYHWLQJLVDSSOLHGWRDOORWKHUVL]HVLQFOXGLQJPXOWLVWUDQGFKDLQ :KHQDVLQJOHSLWFKRIIVHWOLQNLVXVHGSOHDVHFDOFXODWHDUHGXFWLRQRIWKHIDWLJXHVWUHQJWK 56%+FKDLQLVDUHLQIRUFHG56%FKDLQ
Contact Brammer on 0870 240 2100
Chain Drives
217
Lambda Lube Free Roller Chain
Chain Drives
8
Tsubaki’s Lambda Chains were the first in the industry to use a special oil-impregnated bush. Since their launch in 1988, they have been adopted for diverse industries and applications, and their performance has been highly rated. Tsubaki has a wide line-up of lube-free, long life products that help customers reduce costs. Technical Evolution As a pioneer in the lube-free chain market, Tsubaki will reveal some of the key elements behind Lambda’s outstanding performance:
Sintered Bush A special oil-impregnated sintered bush in combination with a special coated pin for long-term internal lubrication is the secret of Tsubaki Lambda’s long economic life and wear resistance.
Easy Cutting BS Lambda chain can be disassembled quick and safely with an original Tsubaki Chain Tool without damaging the bushes (RS08B-LM-1 to RS16B-LM-1).
For applications in the food industry, Tsubaki can supply Lambda chain with bushes impregnated with food grade lubricating oil (NSF-H1 and H3 certified). When an application needs water wash downs or is exposed to moisture, and lubrication is not possible or desirable, Lambda N.E.P. is most efficient.
Advantages Tsubaki has enhanced the Lambda with the following advantages: Save Maintenance Costs No expensive labour costs as it is not required to manually lubricate this chain. Save Purchasing Costs Lower frequency of purchasing due to the high quality of the chain and it’s long economic life. No purchasing of lubricants or lubrication systems necessary. Higher Productivity No unforeseen downtime due to chain breakdown. Less time required for maintenance and therefore more time for production.
Inter-Changeability
Chains: • BS Lambda: BS Lambda Chains are fully interchangeable with standard BS roller chains. • ANSI Lambda: Only simplex ANSI Lambda is interchangeable with standard ANSI roller chain. However, as the pins are longer than those of the standard ANSI roller chain, please make sure that there is no interference with the machine.
Sprockets: • BS Lambda: Standard BS roller chain sprockets can be used. However, due to the extended lifetime of BS Lambda chain, Tsubaki recommends to install sprockets with hardened teeth in every Lambda application. • ANSI Lambda: Only simplex ANSI roller chain sprockets are interchangeable. Multi strand sprockets need to be customised due to the thickness of the roller link plates. Due to the extended lifetime of ANSI Lambda chain, Tsubaki advises to install sprockets with hardened teeth in every Lambda application.
Environmental Friendly Applications run clean thus reducing the risk of contaminating products, machines, floor etc.
Patented Ring Coining Process Breakage of the chains connecting link is no issue at Tsubaki thanks to this unique feature. By applying the patented Ring Coining process, Tsubaki generates a cold deformation around the pin hole of the connecting link plate. This results in residual stress around the pin hole and thereby adds strength. By using this process transmission capacity is 100% of the base chain.
Special Oil Impregnated Sintered Bush
Special Coated Pin
Special Environments Tsubaki Lambda has outstanding performance in temperatures up to 150°C. For temperatures above 150°C Tsubaki has a special high-temperature Lambda available. Please contact Tsubaki for more detailed information.
218
Roller
Ring Coining
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
T
pt
t
L1
b1 d1
T
L2
b1
L1
t
L2 d2
H
d2
d1
p
L
L1
p
OL
2POL
BS LAMBDA Chain BS LAMBDA CHAIN
Chain Drives
L1
18
Dimensions in mm Pin
06B-1Lambda:TSUB RF06B-LM-1 06B-2Lambda:TSUB RF06B-LM-2 08B-1Lambda:TSUB RS08B-LM-1 08B-2Lambda:TSUB RS08B-LM-2 10B-1Lambda:TSUB RS10B-LM-1 10B-2Lambda:TSUB RS10B-LM-2 12B-1Lambda:TSUB RS12B-LM-1 12B-2Lambda:TSUB RS12B-LM-2 16B-1Lambda:TSUB RS16B-LM-1 16B-2Lambda:TSUB RS16B-LM-2 20B-1Lambda:TSUB RS20B-LM-1 20B-2Lambda:TSUB RS20B-LM-2 24B-1Lambda:TSUB RS24B-LM-1 24B-2Lambda:TSUB RS24B-LM-2
Roller Diameter
Pitch
TSUBAKI Chain No.
p 9.525
(3/8”)
Inner Width
Diameter
d1
b1
d2
6.35
5.72
3.28
12.70
(1/2”)
8.51
7.75
4.45
15.875
(5/8”)
10.16
9.65
5.08
19.05
(3/4”)
12.07
11.68
5.72
25.40
(1”)
15.88
17.02
8.28
31.75
(1 1/4”)
19.05
19.56
10.19
38.10
(1 1/2”)
25.40
25.40
14.63
Length
Link Plate
Length
Length
L1
L2
L
6.10 11.20 8.40 15.30 9.55 17.85 11.10 20.85 17.75 33.55 19.90 38.25 26.65 50.80
7.70 12.80 10.00 16.90 11.25 19.55 13.00 22.75 19.95 35.75 23.10 41.45 31.85 56.00
15.10 25.90 18.60 34.50 20.80 39.40 24.40 45.90 39.30 73.40 46.60 84.60 61.70 112.80
Thickness
Thickness
Height
T
t
H (max)
1.30
1.00
8.20
1.60
1.60
12.00
1.50
1.50
14.70
1.80
1.80
16.10
4.00
3.20
21.00
4.40
3.40
26.40
6.00
5.60
33.40
Min. Tensile Strength acc. to Transverse ISO 606 Pitch
Approx. Mass
pt
kN
kg/m
10.24 13.92 16.59 19.46 31.88 36.45 48.36
8.9 16.9 17.8 31.1 22.2 44.5 28.9 57.8 60.0 106.0 95.0 170.0 160.0 280.0
0.39 0.75 0.70 1.35 0.95 1.85 1.25 2.50 2.70 5.40 3.85 7.65 7.45 14.65
Note: 1. Connecting links are clip type for sizes up to RS16B-LM, and cotter type for sizes RS20B-LM to RS24B-LM. 2. RF06B-LM chain has flat shaped link plates. 3. Intermediate plate of RF06B-LM-2 and RS08B-LM-2 is a solid plate. 4. Centre sink riveting is applied for RS08B-LM-1 to RS16B-LM-1. Double stake riveting is applied to all other sizes including multi-strand chain. 5. Warning: previous generations of Lambda chain can not be connected with the above chains due to different dimensions. 6. When a single pitch offset link is used, please calculate a 35% reduction of the fatigue strength. 7. Also available in N.E.P. specification.
Contact Brammer on 0870 240 2100
Chain Drives
219
BS Chain For Corrosive Environments BS standard roller chain) and lightweight chain (50% lighter than BS standard roller chain). Working temperature range: -20°C to +80°C.
Corrosion Resistant Chain (Stainless Steel base)
Corrosion Protected Chain (Carbon Steel base)
BS PC Engineering Plastic Combination Chain The pins and pin link plates of these chains are made of SUS304 (spring clips SUS301). Engineering plastic (white) is used for the inner link. This combination makes it a lube-free, low noise (5 dB lower than
BS N.E.P. New Environmental Plating Chain BS N.E.P. Chain is a TSUBAKI BS chain that has undergone a special surface treatment. The link plates, bushes and bearing pins have a special three stage layer applied in order to provide the maximum protection
from the operating or environmental conditions. (Spring clips are SUS301). N.E.P. Rollers have a special coating designed to resist the corrosive conditions as well as the severe dynamic contact between roller and sprocket.
BS SS Stainless Steel Chain All basic components of this chain are made of Stainless Steel SUS304 (except the spring clips, which are made of SUS301). This chain can be used in special environments such as underwater, acidic and alkaline applications. It can also be used in high and low temperatures (-20°C to +400°C). SUS304 is only marginally magnetic, which is the result of the coldforging process.
This chain is suitable for use in environments exposed to seawater, acidrain and other adverse weather conditions. This chain does not contain any chemically hazardous substances such as Hexavalent Chromium, Lead, Cadmium and Mercury as regulated by RoHS√. The kilowatt ratings are the same as those of the corresponding BS chain with a working temperature range: -10°C to +150°C. Above +60°C a special high-temperature lubrication is required. Of course, BS LAMBDA N.E.P. chain is also available. √ RoHS= Restriction of Hazardous Substances
T
L2
b1
t
L1
Chain Drives
8
Whether your operation requires a sanitary environment, is exposed to corrosive chemicals, is heated to extreme temperatures, runs through a freezer, is exposed to the outdoors or is affected by excessive moisture: our specially designed and tested chains will outlast your current chains and contribute to a cost effective application.
d2
H
d1
p
p
BS PC CHAIN
BS PC Chain Dimensions in mm Pin
TSUBAKI Chain No. 06B-1PC:TSUB RF06B-PC-1 08B-1PC:TSUB RF08B-PC-1 10B-1PC:TSUB RF10B-PC-1 12B-1PC:TSUB RF12B-PC-1
220
Pitch p 9.525 12.70 15.875 19.05
(3/8”) (1/2”) (5/8”) (3/4”)
Bush Diameter d1 6.35 8.51 10.16 12.07
Inner Width b1 5.72 7.75 9.65 11.68
Diameter d2 3.28 4.45 5.08 5.72
Length L1 6.50 8.35 9.55 11.10
Link Plate
Length L2 7.25 10.05 11.25 13.00
Thickness T 1.30 1.60 1.50 1.80
Thickness t 1.00 1.50 1.50 1.80
Height H (max) 8.60 12.00 14.70 16.10
Max. Allowable Load acc. to Tsubaki kN 0.20 0.46 0.53 0.70
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
Approx. Mass kg/m 0.23 0.40 0.51 0.67
b1
T
L2
d1
b1
T
pt
t
L1
t
L1 L2
d2
H
d2
d1
p
18 Chain Drives
L1
pt
T
b1
pt
L2
L1
L
t
L1
p
d2
OL
d1
2POL
BS SS CHAIN
BS SS Chain
Dimensions in mm Pin
TSUBAKI Chain No. 06B-1SS:TSUB RF06B-SS-1 06B-2SS:TSUB RF06B-SS-2 08B-1SS:TSUB RS08B-SS-1 08B-2SS:TSUB RS08B-SS-2 08B-3SS:TSUB RS08B-SS-3 10B-1SS:TSUB RS10B-SS-1 10B-2SS:TSUB RS10B-SS-2 10B-3SS:TSUB RS10B-SS-3 12B-1SS:TSUB RS12B-SS-1 12B-2SS:TSUB RS12B-SS-2 12B-3SS:TSUB RS12B-SS-3 16B-1SS:TSUB RS16B-SS-1 16B-2SS:TSUB RS16B-SS-2 20B-1SS:TSUB RS20B-SS-1
Roller Diameter d1
Pitch p 9.525
Inner Width b1
Diameter d2
(3/8”)
6.35
5.72
3.28
12.70
(1/2”)
8.51
7.75
4.45
15.875
(5/8”)
10.16
9.65
5.08
19.05
(3/4”)
12.07
11.68
5.72
25.40
(1”)
15.88
17.02
8.28
31.75
(1 1/4”)
19.05
19.56
10.19
Length L1 6.50 11.60 8.35 15.30 22.25 9.55 17.85 26.20 11.10 20.90 30.65 17.75 33.55 20.10
Link Plate
Length L2 7.25 12.30 10.05 17.00 23.95 11.25 19.55 27.80 13.00 22.70 32.60 19.95 35.75 23.10
Length L 15.45 28.85 20.05 34.60 48.60 22.90 39.40 56.00 26.70 46.10 65.60 38.90 73.80 48.40
Thickness T
Thickness t
Height H (max)
1.30
1.00
8.20
1.50
1.50
12.00
1.50
1.50
14.70
1.80
1.80
16.10
4.00
3.20
21.00
4.50
3.50
26.00
Transverse Pitch pt 10.24 13.92 13.92 16.59 16.59 19.46 19.46 31.88 -
Max. Allowable Load acc. to Tsubaki kN 0.28 0.56 0.50 1.00 1.50 0.67 1.34 2.01 0.89 1.78 2.67 2.10 4.20 2.95
Approx. Mass kg/m 0.39 0.75 0.70 1.35 2.00 0.95 1.85 2.80 1.25 2.50 3.80 2.70 5.40 3.85
BS N.E.P. CHAIN Dimensions in mm Pin
TSUBAKI Chain No. 06B-1NEP:TSUB RF06B-NEP-1 06B-2NEP:TSUB RF06B-NEP-2 08B-1NEP:TSUB RS08B-NEP-1 08B-2NEP:TSUB RS08B-NEP-2 10B-1NEP:TSUB RS10B-NEP-1 10B-2NEP:TSUB RS10B-NEP-2 12B-1NEP:TSUB RS12B-NEP-1 12B-2NEP:TSUB RS12B-NEP-2 16B-1NEP:TSUB RS16B-NEP-1 16B-2NEP:TSUB RS16B-NEP-2 20B-1NEP:TSUB RS20B-NEP-1 20B-2NEP:TSUB RS20B-NEP-2 24B-1NEP:TSUB RS24B-NEP-1
Roller Diameter d1
Inner Width b1
(3/8”)
6.35
5.72
3.28
12.70
(1/2”)
8.51
7.75
4.45
15.875
(5/8”)
10.16
9.65
5.08
19.05
(3/4”)
12.07
11.68
5.72
25.40
(1”)
15.88
17.02
8.28
31.75
(1 1/4”)
19.05
19.56
10.19
38.10
(1 1/2”)
25.40
25.40
14.63
Pitch p 9.525
Diameter d2
Length L1 6.35 11.43 8.40 15.30 9.55 17.85 11.20 20.85 17.75 33.55 19.90 38.25 26.65
Link Plate
Length L2 7.65 12.57 10.00 16.90 11.25 19.55 13.10 22.75 19.95 35.75 23.10 41.45 31.85
Length L 14.20 18.40 33.60 21.10 39.40 24.80 46.30 38.90 73.80 46.95 84.85 62.00
Contact Brammer on 0870 240 2100
Thickness Thickness T t 1.30
1.00
1.60
1.60
1.50
1.50
1.80
1.80
4.00
3.20
4.40
3.40
6.00
5.60
Min. Tensile Strength Transverse acc. to Height ISO 606 Pitch H (max) pt kN 8.9 8.20 10.24 16.9 17.8 11.80 13.92 31.1 22.2 14.70 16.59 44.5 28.9 16.10 19.46 57.8 60.0 21.00 31.88 106.0 95.0 26.00 36.45 170.0 33.44 160.0
Min. Tensile Av. Tensile Strength Strength acc. to Approx. acc. to Tsubaki Mass Tsubaki kN kN kg/m 9.0 9.9 0.39 17.0 18.7 0.75 19.0 20.9 0.70 32.0 35.2 1.35 23.0 25.3 0.95 44.5 49.0 1.85 31.0 34.1 1.25 61.0 67.1 2.50 70.0 77.0 2.70 128.0 141.0 5.40 98.1 108.0 3.85 197.0 217.0 7.65 167.0 184.0 7.45
Chain Drives
221
Introduction to TSUBAKI Attachment Chain In the world of attachment chain TSUBAKI is the manufacturer you require to assure smooth operation. Whether your application requires attachments or extended pins in Carbon Steel, N.E.P., Nickel Plating or Stainless Steel, TSUBAKI is your partner. TSUBAKI’s maintenance
Chain Drives
8
free solution, LAMBDA, is also available with a wide range of attachments. When starting with a completely new design, TSUBAKI can tailor make an attachment chain for you in any specification.
Attachment Chain Structure k
Pin Lin
Fit Press Fit Press Bush r Rolle
r Rolle
Fit Press
Pin t Link
Offse
it Slip F k Pin g Lin c e tin n n o C
Fit Press Bush r Rolle
r Rolle
it Slip F p
g Cli
Sprin
te
k Pla
Pin Lin
it Slip F r Cotte
Base
Pin k
g Lin
ectin
Conn
Chain
t Link
Offse
Standard Product Range The product range for our standard attachment chains is: • BS Single Pitch Standard chain + standard attachments • ANSI Single Pitch Standard chain + standard attachments • ANSI Single Pitch HP Hollow Pin chain • ANSI Single Pitch CU Curved chain • ANSI Double Pitch Standard chain + standard attachments • ANSI Double Pitch HP Hollow Pin chain
222
We work harder to save you money and downtime – Tel: 0870 240 2100
late
Link P
Link
Match & Tag Service: High Accuracy, Narrow Tolerance Service Tolerances
so for customers with specific application
When chains have to run in parallel for conveying purposes in for instance packaging machines or when a minimum of difference in chain length is required in lifting applications (accumulator towers in the steel and carpet industry)
requirements, we are able to supply chains with a specific length tolerance, or even pairs & multiple chains length matched
TSUBAKI excels in quality performance. We can guarantee a maximum chain length difference of 0.50 mm independent of the total chain length demanded by our customers!
and tagged in the same way for easy identification and installation. This is as
1A
2A 2B
measurement equipment (the “Matchy”) kept
1B
a result of the sophisticated chain length
18 Chain Drives
For TSUBAKI, quality is second nature- and
in house within the European headquarters with supply times for such chains kept to a minimum-ideal for distributors, final consumers and OEM customers alike.
Custom Made Attachments
Canning
Bookbinder
Packaging
Tsubaki Gripper Chain New solution for the thermoforming process found with Tsubaki’s wide range of ‘Gripper’ chains. Tsubaki has launched a new range of ‘gripper’ chains to be used for thermoforming in various sectors including food, electrical and medical packaging. Whereas conventional gripping attachments often open vertically, Tsubaki’s range opens to the side as well which provides a larger opening preventing jams and making loading easier. This innovative solution is available with many variations of transmission chain, including Tsubaki’s unique Lambda lube-free chain. Offering extended chain life and minimal maintenance Tsubaki’s gripper chain offers a fresh, new option for thermoforming.
Contact Brammer on 0870 240 2100
Chain Drives
223
Performance Through Innovation
Chain Drives
8
Lube Free Series
Drive Chain Series GT4 Winner
LAMBDA Chain
• Unique Lube Groove Bush
• Absolutely no Lubrication Required
• Longer Wear Life - Lower CO2 Emission
• Longer Wear Life
• High Transmission Capacity
• Clean Handling & Running
• Easy Disassembly
• Higher Production Output
• Accuracy of Chain Length Tolerance
& Reduced Maintenance • ANSI LAMBDA KF Series now available (usable at high temperatures up to 230°C and suitable for food product applications)
Corrosion Resistant Series
Corrosion Protected Series
Engineering Plastic Chain
N.E.P. Chain
• Lube Free Operation
• Innovative Surface Treatment
• Cleaner & Quieter Operation
• Superior Corrosion Resistance
• Easy Maintenance
• Environmentally Friendly
• Alternative to Stainless Steel Chain
Mechanical Components
Industry Specific
Cam Clutches (Freewheel)
TSUBAKI’s product range and service
• Full European Range
capabilities are amongst the best in the
• For Indexing, Backstopping
business, from standard attachments
& Over-running Applications • From as low as 6 Nm up to 686.000 Nm Torque Capacity • Available from Stock
through to specific industry applications. For example: Gripper chain - for form, fill & vacuum seal wrapping industry. Specialist attachments and specific matched length tolerance chains are available to meet your production schedules.
224
FREE 24/7 technical support – Tel: 0870 240 2100
TSUBAKI: Value Added Services Installation
Training Services TSUBAKI offers technical training packages tailored to suit your needs. From a simple introduction to chain and installation basics; through to chain selection, advanced failure analysis and application specific advice; TSUBAKI can partner with apprentices, maintenance engineers, and designers to ensure its wealth of experience is available.
18 Chain Drives
TSUBAKI engineers can support installation projects from initial quotation stage, through on-site support during installation and then to final sign off at commission. TSUBAKI products offer best value for money when correctly installed, hence our support during this critical stage.
Surveying TSUBAKI can support chain users by providing a site survey of their entire plant. This ensures the ordering of complex chain is made simple by an easy-to-use survey database. TSUBAKI wants this to be an effective business tool so uses simple language to identify chain and attachment detail. The survey results can also help reduce your overall stock level and further reduce cost by identifying and consolidating common chain types.
Chain Analysis TSUBAKI can analyse any returned chain to make a comprehensive and easy-to-follow report. We can often recommend TSUBAKI products that will offer further application benefits.
Chain Selection Condition Based Monitoring Service TSUBAKI offers regular and scheduled site visits to monitor its chain’s performance. Customers receive a detailed report recommending the necessary actions to ensure best possible performance and value.
Contact Brammer on 0870 240 2100
TSUBAKI has experience of many application types and unique machine designs. We can offer a full chain selection package, working directly with engineers and designers to ensure the product specified is the ‘perfect fit’ for your needs.
Chain Drives
225
Complementary Products
Chain Drives
8
Tsubaki’s offers the most complete and versatile selection of one-way clutches in the global industry. Cam Clutches are precision devices which lock the inner- and outer races, through a wedging action of cams, to transmit torque in one direction of rotation and overrun in the opposite direction. These units are often referred to as freewheels, sprag clutches, overrunning clutches, backstops or one-way clutches, depending upon on the application for which they are used.
Tsubaki Roller Chain Coupling The Tsubaki Roller Chain Coupling is a flexible coupling of amazingly simple construction. It consists of the combination of one coupling chain and a pair of coupling sprockets. The coupling can be used over a wide range of applications. It is flexible and strong, and surpasses all others with its unique qualities.
Tsubaki Overload Protection Torque Gard TGM Series are safety devices for the protection of machine equipment from overload. The Torq Gard TGM Series has many advantages compared to other safety devices such as pin type, friction type, ball type, roller type etc.
Design Features Full Cam Complement The full compliment of cams provides the maximum number of load transmitting members per given diameter. The result is a higher torque capacity than other clutches.
Cam Design Precision formed cams, made of special alloy steel assure extra long wear- and fatigue life.
Tsubaki Echt Flex Couplings This non-backlash, lube-free coupling has high torsional stiffness, maximizing the benefit of servomotors. Based on finite element analysis, the disk is optimally designed to ensure reliable torque transmission, while absorbing misalignment smoothly.
Tsubaki Sprockets Tsubaki sprockets are built from top-grade, heat-treated carbon steel to offer long wear life, resist abrasion and withstand heavy shock loads. For extra corrosion resistance and food grade applications, alloy and stainless steel sprockets are also available. You get longer service life and reliable performance, turn after turn, time after time.
High Quality Components Outer- and inner races are made of high-quality alloy steel with high surface hardness and core toughness. The races are precision ground, providing excellent concentricity and surface finish to obtain cam rotation.
226
All models are RoHS compliant.
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
Sprockets
Chain Link Extractors
3/8" Simplex Sprockets - Pilot Bore
Suitable for 3/8" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Quick and easy way to break a chain Can be used on all brands of chain Q Two sizes available for chains 3/8" to 5/8" and 3/4" to 1.1/4" BS/ANSI Q Q
Price Each Order Code Product Code Size WX35187
CHAINEXTRNO1
3/8 - 5/8"
WX35188
CHAINEXTRNO2
3/4 - 1.1/4"
1+
5+
£50.38
£45.34
£117.44
£105.70
Part Code
De
Dp
dm
d1
A
31-17-1008:MECRO
55.3
51.83
45
1008
22
31-18-1008:MECRO
58.3
54.85
43
1008
22
31-19-1008:MECRO
61.3
57.87
45
1008
22
31-20-1008:MECRO
64.3
60.89
46
1008
22
31-21-1008:MECRO
68
63.91
46
1008
22
31-23-1210:MECRO
73.5
69.95
63
1210
25
31-24-1210:MECRO
77
72.97
62
1210
25
31-25-1210:MECRO
80
76.02
63
1210
25
31-27-1210:MECRO
86
82.02
63
1210
25
31-28-1210:MECRO
89
85.07
60
1210
25
31-30-1210:MECRO
94.7
91.12
63
1210
25
Chain Connecting Tool 3/8" Duplex Sprockets - Pilot Bore
Q Q
Suitable for 3/8" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
3SR8:MECRO
28
24.89
15
8
20
3SR9:MECRO
31
27.85
18
8
20
3SR10:MECRO
34
30.82
20
8
20
3SR11:MECRO
37
33.8
22
8
25
Q
3SR12:MECRO
40
36.8
25
8
25
Q
3SR13:MECRO
43
39.79
28
10
25
3SR14:MECRO
46.3
42.8
31
10
25
3SR15:MECRO
49.3
45.81
34
10
25
3SR16:MECRO
52.3
48.82
37
10
28
3SR17:MECRO
55.3
51.83
40
10
28
3SR18:MECRO
58.3
54.85
43
10
28
3SR19:MECRO
61.3
57.87
45
10
28
3SR20:MECRO
64.3
60.89
46
10
28
3SR21:MECRO
68
63.91
48
12
28
Q
3SR22:MECRO
71
66.93
50
12
28
Q
3SR23:MECRO
73.5
69.95
52
12
28
Part Code
De
Dp
dm
d1
A
3SR24:MECRO
77
72.97
54
12
28
3DR12:MECRO
40
36.8
25
10
25
3SR25:MECRO
80
76
57
12
28
3DR13:MECRO
43
39.79
28
10
25
3SR26:MECRO
83
79.02
60
12
28
3DR14:MECRO
46.3
42.8
31
10
25
3SR30:MECRO
94.7
91.12
60
12
28
3DR15:MECRO
49.3
45.81
34
10
25
3SR32:MECRO
101.3
97.17
65
14
30
3DR16:MECRO
52.3
48.82
37
12
30
3DR17:MECRO
55.3
51.83
40
12
30
3DR18:MECRO
58.3
54.85
43
12
30
3DR19:MECRO
61.3
57.87
46
12
30
3DR20:MECRO
64.3
60.89
49
12
30
3DR21:MECRO
68
63.91
52
12
30
3DR22:MECRO
71
66.93
55
12
30
3DR23:MECRO
73.5
69.95
58
12
30
3DR25:MECRO
80
76
64
12
30
3DR30:MECRO
94.7
91.12
79
12
30
Tools designed to make roller chain connection quick and easy Can be used on all brands of chain Q Two sizes available for BS and ANSI chains from 0.375" pitch to 0.75" (CT35), and 1.00" pitch to 3.00" pitch (CT80) Price Each Order Code Product Code Chain Pitch WX38219 WX38220
CT35
1+
0.375"-0.75"
CT80
£119.28
1.00"-3.00"
£269.39
5+ £107.35 £242.45
T-Max Chain Tensioners
3/8" Simplex Sprockets - Taper Bore • Automatically take up the slack with spring loaded T-Max Chain Tensioners. • Improve drive efficiency and extend component life with proper chain tension • A variety of design and size options suitable for a wide range of power transmission/motor applications. Product Code
Type
Chain Size
Force (lbs)
CT1111-L:FEND
Linear-Large Arc UHMW Head
06B-1
5-30
CT1111:FEND
Linear-Large Arc UHMW Head
06B-1
15-40
CT1112:FEND
Linear-Large Arc UHMW Head
08B-1
15-40
CT2111:FEND
Linear-Large Arc UHMW Head
10B-1
20-60
CT2109:FEND
Linear-Large Arc UHMW Head
12B-1
20-60
CT3111:FEND
Linear-Large Arc UHMW Head
16B-1
45-100
CT3112:FEND
Linear-Large Arc UHMW Head
20B-1
45-100
CT3112-H:FEND
Linear-Large Arc UHMW Head
20B-1
30-200
CT3102-H:FEND
Linear-Large Arc UHMW Head
100-1
30-200
CT1113-L:FEND
Linear-Large Arc UHMW Head
06B-2
5-30
CT1113:FEND
Linear-Large Arc UHMW Head
06B-2
15-40
CT1114:FEND
Linear-Large Arc UHMW Head
08B-2
15-40
CT3113:FEND
Linear-Large Arc UHMW Head
16B-2
45-100
CT1103-L:FEND
Linear-Large Arc UHMW Head
35-2
5-30
18 Chain Drives
Chain Accessories
Contact Brammer on 0870 240 2100
Suitable for 3/8" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Chain Drives
227
3/8" Duplex Sprockets - Taper Bore
1/2" Simplex Sprockets - Pilot Bore Suitable for 1/2" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Chain Drives
8
Q Q
Suitable for 3/8" pitch roller chain Q Taper bore Q Last 4 digits indicates the taper bush that is required Q
Suitable for 1/2" Ptich Roller Chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
4SR10:MECRO
45.2
41.1
26
10
25
4SR11:MECRO
48.7
45.07
29
10
25
Part Code
De
Dp
dm
d1
A
4SR12:MECRO
53
49.07
33
10
28
32-17-1008:MECRO
55.3
51.83
41
1008
22
4SR13:MECRO
57.4
53.06
37
10
28
32-19-1008:MECRO
61.3
57.87
46
1008
22
4SR14:MECRO
61.8
57.07
41
10
28
32-21-1008:MECRO
68
63.91
49
1008
22
4SR15:MECRO
65.5
61.09
45
10
28
32-23-1210:MECRO
73.5
69.95
59
1210
25
4SR16:MECRO
69.5
65.1
50
12
28
32-24-1210:MECRO
77
72.97
61
1210
25
4SR17:MECRO
73.6
69.11
52
12
28
32-25-1210:MECRO
80
76.02
64
1210
25
4SR18:MECRO
77.8
73.14
56
12
28
32-27-1210:MECRO
86
82.02
70
1210
25
4SR19:MECRO
81.7
77.16
60
12
28
32-30-1210:MECRO
94.7
91.12
75
1210
75
4SR20:MECRO
85.8
81.19
64
12
28
4SR21:MECRO
89.7
85.22
68
12
28
4SR22:MECRO
93.8
89.24
70
12
28
4SR23:MECRO
98.2
93.27
70
14
28
4SR24:MECRO
101.8
97.29
70
14
28
4SR25:MECRO
105.8
101.33
70
14
28
4SR26:MECRO
110
105.36
70
16
30
4SR27:MECRO
114
109.4
70
16
30
4SR28:MECRO
118
113.42
70
16
30
4SR30:MECRO
126.1
121.5
80
16
30
4SR31:MECRO
130.2
125.54
90
16
30
4SR32:MECRO
134.3
129.56
90
16
30
4SR33:MECRO
138.4
133.6
90
16
30
4SR34:MECRO
142.6
137.64
90
16
30
3/8" Triplex Sprockets - Pilot Bore
4SR35:MECRO 4SR36:MECRO
146.7 151
141.68 145.72
90 90
1/2" Simplex Sprockets - Taper Bore
Suitable for 3/8" pitch roller chain Q Minimum bore allowing reworking for large bore and keyway Q
Part Code
De
Dp
dm
d1
A
3TR11:MECRO
37
33.8
22
10
35
3TR15:MECRO
49.3
45.81
34
12
35
3TR17:MECRO
55.3
51.83
40
12
35
3TR19:MECRO
61.3
57.87
46
12
35
3TR21:MECRO
68
63.91
52
14
40
3TR23:MECRO
73.5
69.95
58
14
40
3TR25:MECRO
80
76
64
14
40
228
16 16
30 35
Part Code
De
Dp
dm
d1
A
41-15-1008:MECRO
65.5
61.9
45
1008
22
41-16-1108:MECRO
69.5
65.1
50
1108
22
41-17-1210:MECRO
73.6
69.11
60
1210
25
41-18-1210:MECRO
77.8
73.14
60
1210
25
41-19-1210:MECRO
81.7
77.16
63
1210
25
41-20-1610:MECRO
85.8
81.19
71
1610
25
41-21-1610:MECRO
89.7
85.22
71
1610
25
41-22-1610:MECRO
93.8
89.24
70
1610
25
41-23-1610:MECRO
98.2
93.27
76
1610
25
41-24-1610:MECRO
101.8
97.29
70
1610
25
41-25-1610:MECRO
105.8
101.33
76
1610
25
41-26-1610:MECRO
110
105.36
70
1610
25
41-27-1610:MECRO
114
109.4
76
1610
25
41-28-2012:MECRO
118
1/2" Duplex Sprockets - Pilot Bore
Q Q
Suitable for 1/2" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
4DR11:MECRO
48.7
45.07
32
12
35
4DR12:MECRO
53
49.07
35
12
35
4DR13:MECRO
57.4
53.06
38
12
35
4DR14:MECRO
61.8
57.07
42
12
35
4DR15:MECRO
65.5
61.07
46
12
35
4DR16:MECRO
69.5
65.1
50
14
35
4DR17:MECRO
73.6
69.11
54
14
35
4DR18:MECRO
77.8
73.14
58
14
35
4DR19:MECRO
81.7
77.16
62
14
35
4DR20:MECRO
85.8
81.19
66
14
35
4DR21:MECRO
89.7
85.22
70
16
40
4DR22:MECRO
93.8
89.24
70
16
40
4DR23:MECRO
98.2
93.27
70
16
40
4DR24:MECRO
101.8
97.29
75
16
40
4DR25:MECRO
105.8
101.33
80
16
40
4DR27:MECRO
114
109.4
85
16
40
4DR30:MECRO
126.1
121.5
100
16
40
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
Part Code
De
Dp
dm
d1
A
Part Code
De
Dp
dm
d1
A
4TR14:MECRO
61.8
57.07
42
14
50
5SR8:MECRO
47
41.8
25
10
25
4TR15:MECRO
65.5
61.09
46
14
50
5SR9:MECRO
52.6
46.42
30
10
25
4TR16:MECRO
69.5
65.1
50
16
50
5SR10:MECRO
57.5
51.37
35
10
25
4TR17:MECRO
73.6
69.11
54
16
50
5SR11:MECRO
63
56.34
37
12
30
4TR19:MECRO
81.7
77.16
62
16
50
5SR12:MECRO
68
61.34
42
12
30
4TR20:MECRO
85.8
81.19
66
16
50
5SR13:MECRO
73
66.32
47
12
30
4TR21:MECRO
89.7
85.22
70
16
55
5SR14:MECRO
78
71.34
52
12
30
4TR23:MECRO
98.2
93.27
70
16
50
5SR15:MECRO
83
76.36
57
12
30
4TR25:MECRO
105.8
101.33
80
16
55
5SR16:MECRO
88
81.37
60
12
30
4TR30:MECRO
126.1
121.5
100
20
55
5SR17:MECRO
93
86.39
60
12
30
5SR18:MECRO
98.3
91.42
70
14
30
5SR19:MECRO
103.3
96.45
70
14
30
5SR20:MECRO
108.4
101.49
75
14
30
5SR21:MECRO
113.4
106.52
75
16
30
5SR22:MECRO
118
111.55
80
16
30
5SR23:MECRO
123.5
116.58
80
16
30
5SR24:MECRO
128.3
121.62
80
16
30
5SR25:MECRO
134
126.66
80
16
30
5SR27:MECRO
144
134.75
85
20
35
5SR30:MECRO
158.8
151.87
90
20
35
1/2" Triplex Sprockets - Taper Bore
Suitable for 1/2" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q
18 Chain Drives
1/2" Duplex Sprockets - Taper Bore
5/8" Simplex Sprockets - Taper Bore
Q
Part Code
De
Dp
dm
d1
A
42-15-1008:MECRO
65.5
61.9
46
1008
22
42-16-1108:MECRO
69.5
65.1
50
1108
22
42-17-1210:MECRO
73.6
69.11
56
1210
25
42-18-1210:MECRO
77.8
73.14
58
1210
25
42-19-1210:MECRO
81.7
77.16
62
1210
25
42-20-1610:MECRO
85.8
81.19
66
1610
25
42-21-1610:MECRO
89.7
85.22
70
1610
25
42-22-1610:MECRO
93.8
89.24
76
1610
25
42-23-1610:MECRO
98.2
93.27
79
1610
25
42-24-2012:MECRO
101.8
97.29
84
2012
32
42-25-2012:MECRO
105.8
101.33
87
2012
32
42-26-2012:MECRO
110
105.36
85
2012
32
42-27-2012:MECRO
114
109.4
87
2012
32
Part Code
De
Dp
d1
A
42-30-2012:MECRO
126.1
121.5
87
2012
32
43-19-1210:MECRO
81.7
77.16
1210
34.9
43-21-1610:MECRO
89.7
85.22
1610
34.9
43-25-2012:MECRO
105.8
101.33
2012
34.9
43-30-2012:MECRO
126.1
121.5
2012
34.9
1/2" Triplex Sprockets - Pilot Bore
Suitable for 1/2" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
dm
5/8" Simplex Sprockets - Pilot Bore
Suitable for 5/8" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Q Q
Suitable for 1/2" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Q Q
Part Code
De
Dp
dm
d1
A
51-13-1008:MECRO
73
66.32
47
1008
22
51-14-1108:MECRO
78
71.34
52
1108
22
51-15-1210:MECRO
83
76.36
60
1210
25
51-16-1610:MECRO
88
81.37
70
1610
25
51-17-1610:MECRO
93
86.36
71
1610
25
51-18-1610:MECRO
98.3
91.42
75
1610
25
51-19-1610:MECRO
103.3
96.45
75
1610
25
51-20-1610:MECRO
108.4
101.49
75
1610
25
51-21-1610:MECRO
113.4
106.52
76
1610
25
51-22-1610:MECRO
118
111.55
76
1610
25
51-23-1610:MECRO
123.4
116.58
76
1610
25
51-24-2012:MECRO
128.3
121.62
90
2012
32
51-25-2012:MECRO
134
126.66
90
2012
32
51-26-2012:MECRO
139
131.7
85
2012
32
51-27-2012:MECRO
144
136.75
90
2012
32
51-28-2012:MECRO
148.7
141.78
90
2012
32
51-30-2012:MECRO
158.8
151.87
90
2012
32
Suitable for 5/8" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Contact Brammer on 0870 240 2100
Chain Drives
229
5/8" Duplex Sprockets - Pilot Bore
Part Code
De
Dp
d1
A
52-15-1210:MECRO
83
76.36
dm
1210
25.5
52-17-1610:MECRO
93
86.36
1610
25.5
52-18-1610:MECRO
98.3
91.42
1610
52-19-1610:MECRO
103.3
96.45
1610
25.3
52-20-1610:MECRO
108.4
101.49
1610
25.5
52-21-1610:MECRO
113.4
106.52
1610
25.5
52-23-1610:MECRO
123.4
116.58
1610
25.5
52-25-2012:MECRO
134
126.66
90
2012
32
52-27-2012:MECRO
144
136.75
90
2012
32
52-28-2012:MECRO
148.7
141.78
90
2012
32
52-30-2012:MECRO
158.8
151.87
90
2012
32
Suitable for 3/4" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Part Code
De
Dp
dm
d1
A
61-13-1210:MECRO
87.5
79.59
60
1210
25
61-14-1610:MECRO
93.6
85.61
71
1610
25
61-15-1610:MECRO
99.8
91.63
70
1610
25
61-16-1610:MECRO
105.5
97.65
75
1610
25
61-17-1610:MECRO
111.5
103.67
76
1610
25
61-18-2012:MECRO
118
109.71
90
2012
32
61-19-2012:MECRO
124.2
115.75
90
2012
32
61-20-2012:MECRO
129.7
121.78
90
2012
32
61-21-2517:MECRO
136
127.82
102
2517
45
61-22-2517:MECRO
141.8
133.86
102
2517
45
Suitable for 5/8" pitch roller chain Q Minimum bore allowing reworking for large bore and keyway
61-23-2517:MECRO
149
139.9
108
2517
45
61-24-2517:MECRO
153.9
145.94
108
2517
45
Part Code
De
Dp
dm
d1
A
61-25-2517:MECRO
160
152
108
2517
45
5DR12:MECRO
68
61.34
44
14
40
61-27-2517:MECRO
172.3
164
108
2517
45
5DR13:MECRO
73
66.32
49
14
40
61-30-2517:MECRO
190.5
182.25
108
2517
45
5DR14:MECRO
78
71.34
54
14
40
5DR15:MECRO
83
76.36
59
14
40
5DR16:MECRO
88
81.37
64
16
45
5DR17:MECRO
93
86.39
69
16
45
5DR18:MECRO
98.3
91.42
74
16
45
5DR19:MECRO
103.3
96.45
79
16
45
5DR20:MECRO
108.4
101.49
84
16
45
3/4" Simplex Sprockets - Pilot Bore
Chain Drives
8
Q
3/4" Duplex Sprockets - Pilot Bore
Q Q
Suitable for 3/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
5DR21:MECRO
113.4
106.52
85
16
45
5DR23:MECRO
123.5
116.58
95
16
45
Part Code
De
Dp
dm
d1
A
5DR25:MECRO
134
126.66
105
16
45
6SR10:MECRO
69
61.64
42
12
30
5DR30:MECRO
158.8
151.87
120
20
45
6SR11:MECRO
75
67.61
46
14
35
6SR12:MECRO
81.5
73.61
52
14
35
6SR13:MECRO
87.5
79.59
58
14
35
6SR14:MECRO
93.6
85.61
64
14
35
6SR15:MECRO
99.8
91.63
70
14
35
6SR16:MECRO
105.5
97.65
75
16
35
6SR17:MECRO
111.5
103.67
80
16
35
6SR18:MECRO
118
109.71
80
16
35
6SR19:MECRO
124.2
115.75
80
16
35
6SR20:MECRO
129.7
121.78
80
16
35
6SR21:MECRO
136
127.82
90
20
40
6SR22:MECRO
141.8
133.86
90
20
40
6SR23:MECRO
149
139.9
90
20
40
6SR24:MECRO
153.9
145.94
90
20
40
6SR25:MECRO
160
152
90
20
40
6SR26:MECRO
165.9
158.04
95
20
40
Part Code
De
Dp
dm
d1
A
6SR27:MECRO
172.3
164.09
95
20
40
6DR11:MECRO
75
67.61
47
16
50
6SR30:MECRO
190.5
182.25
95
20
40
6DR13:MECRO
87.5
79.59
59
16
50
6DR14:MECRO
93.6
85.61
65
16
50
6DR15:MECRO
99.8
91.63
71
16
50
6DR16:MECRO
105.5
97.65
77
20
50
6DR17:MECRO
111.5
103.67
83
20
50
6DR19:MECRO
124.2
115.75
95
20
50
6DR20:MECRO
129.7
121.78
100
20
50
6DR21:MECRO
136
127.82
100
20
50
6DR23:MECRO
149
139.9
110
20
50
6DR24:MECRO
153.9
145.94
110
20
50
6DR25:MECRO
160
152
120
20
50
6DR26:MECRO
165.9
158.04
120
20
50
6DR30:MECRO
190.5
182.25
120
20
50
5/8" Duplex Sprockets - Taper Bore
3/4" Simplex Sprockets - Taper Bore
Suitable for 5/8" pitch roller chain Q Taper bore Q Last 4 digits indicates the taper bush that is required Q
230
Q Q
Suitable for 3/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
We work harder to save you money and downtime – Tel: 0870 240 2100
3/4" Duplex Sprockets - Taper Bore
3/4" Triplex Sprockets - Taper Bore
Part Code
De
Dp
dm
d1
A
8SR19:MECRO
165.2
154.33
100
20
45
8SR20:MECRO
173.2
162.38
100
20
45
8SR21:MECRO
181.2
170.43
110
20
50
8SR22:MECRO
189.3
178.48
110
20
50
8SR23:MECRO
197.5
186.53
110
20
50
8SR24:MECRO
205.5
194.59
110
20
50
8SR25:MECRO
213.5
202.66
110
20
50
8SR26:MECRO
221.6
21.72
120
20
50
8SR30:MECRO
254
243
120
20
50
1" Simplex Sprockets - Taper Bore
Chain Drives
18
Suitable for 3/4" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Part Code
De
Dp
62-15-1610:MECRO
99.8
62-16-1610:MECRO 62-17-1610:MECRO
dm
d1
A
91.63
1610
30.3
105.5
97.65
1610
30.3
111.5
103.67
1610
30.3
62-19-2012:MECRO
124.2
115.75
90
2012
32
62-20-2517:MECRO
129.7
121.78
108
2517
45
62-21-2517:MECRO
136
127.82
108
2517
45
62-23-2517:MECRO
149
139.9
108
2517
45
62-24-2517:MECRO
153.9
145.94
108
2517
45
62-25-2517:MECRO
160
152
108
2517
45
62-27-2517:MECRO
172.3
164
108
2217
45
62-30-2517:MECRO
190.5
182.25
108
2517
45
Suitable for 3/4" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Part Code
De
Dp
d1
A
63-15-1615:MECRO
99.8
91.63
dm
1615
49.8
63-17-2012:MECRO
111.5
103.67
1615
49.8
63-19-2012:MECRO
124.2
115.75
2012
49.8
63-21-2517:MECRO
136
127.82
2517
49.8
63-23-2517:MECRO
149
139.9
2517
49.8
63-25-2517:MECRO
160
152
2517
49.8
1" Simplex Sprockets - Pilot Bore
Suitable for 1" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
3/4" Triplex Sprockets - Pilot Bore
Q Q
Suitable for 3/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Q Q
Suitable for 1" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
Part Code
De
Dp
dm
d1
A
6TR12:MECRO
81.5
73.61
53
20
70
8SR9:MECRO
85
74.27
50
16
35
6TR15:MECRO
99.8
91.63
71
20
70
8SR10:MECRO
93
82.19
55
16
35
6TR16:MECRO
105.5
97.65
77
20
70
8SR11:MECRO
101.5
90.14
61
16
40
6TR17:MECRO
111.5
103.67
83
20
70
8SR12:MECRO
109
98.14
69
16
40
6TR19:MECRO
124.2
115.75
95
20
70
8SR13:MECRO
117
106.12
78
16
40
6TR20:MECRO
129.7
121.78
100
20
70
8SR14:MECRO
125
114.15
84
16
40
6TR21:MECRO
136
127.82
100
20
70
8SR15:MECRO
133
122.17
92
16
40
6TR23:MECRO
149
139.9
110
20
70
8SR16:MECRO
141
130.2
100
20
45
6TR25:MECRO
160
152
120
20
70
8SR17:MECRO
149
138.22
100
20
45
8SR18:MECRO
157
146.28
100
20
45
Contact Brammer on 0870 240 2100
Part Code
De
Dp
dm
d1
A
81-13-1610:MECRO
117
106.12
73
1615
38
81-15-1610:MECRO
133
122.17
76
1615
38
81-16-2012:MECRO
141
130.2
90
2012
32
81-17-2012:MECRO
149
138.22
90
2012
32
81-18-2517:MECRO
157
146.28
108
2517
45
81-19-2517:MECRO
165.2
154.33
108
2517
45
81-20-2517:MECRO
173.2
162.38
108
2517
45
81-21-2517:MECRO
181.2
170.43
110
2517
45
81-23-2517:MECRO
197.5
186.53
110
2517
45
81-24-2517:MECRO
205.5
194.59
108
2517
45
81-25-2517:MECRO
213.5
202.66
110
2517
45
81-27-2517:MECRO
229.6
218.79
110
2517
45
81-28-2517:MECRO
237.7
226.85
108
2517
45
81-30-3020:MECRO
254
243
140
3020
51
For chain lubricants, see our Oils & Greases section
Chain Drives
231
1" Duplex Sprockets - Pilot Bore
1" Triplex Sprockets - Pilot Bore
1 1/4" Simplex Sprockets - Pilot Bore
Chain Drives
8
Q Q
Suitable for 1" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Q Q
Suitable for 1" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Q Q
Suitable for 1 1/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
Part Code
De
Dp
dm
d1
A
Part Code
De
Dp
dm
d1
A
8DR12:MECRO
109
98.14
72
20
70
8TR12:MECRO
109
98.14
72
25
100
10SR10:MECRO
117.9
102.74
70
20
40
8DR13:MECRO
117
106.12
80
20
70
8TR15:MECRO
133
122.17
96
25
100
10SR11:MECRO
127.8
112.68
77
20
45
8DR15:MECRO
133
122.17
96
20
70
8TR19:MECRO
165.2
154.33
128
25
100
10SR13:MECRO
147.8
132.65
98
20
45
8DR17:MECRO
149
138.22
112
20
70
8TR21:MECRO
181.2
170.43
130
25
100
10SR14:MECRO
157.8
142.68
108
20
45
8DR19:MECRO
165.2
154.33
128
20
70
10SR15:MECRO
167.9
152.720118
118
20
45
8DR20:MECRO
173.2
162.38
130
20
70
10SR16:MECRO
177.9
162.75
120
20
50
8DR21:MECRO
181.2
170.43
130
25
70
10SR17:MECRO
187.9
172.78
120
25
50
8DR23:MECRO
197.5
186.53
130
25
70
10SR18:MECRO
198
182.85
120
25
50
8DR25:MECRO
213.5
202.66
130
25
70
10SR19:MECRO
208.1
192.92
120
25
50
8DR26:MECRO
221.6
210.72
130
25
70
10SR20:MECRO
218.1
202.98
120
25
50
8DR32:MECRO
270
259.13
140
25
70
10SR23:MECRO
248.3
233.17
140
25
55
10SR25:MECRO
268.5
253.33
140
25
55
1" Triplex Sprockets - Taper Bore
1" Duplex Sprockets - Taper Bore 1 1/4" Duplex Sprockets - Pilot Bore
Suitable for 1" pitch roller chain Taper bore Q Last 4 digits indicates the taper bush that is required Q Q
Suitable for 1" pitch roller chain Q Taper bore Q Last 4 digits indicates the taper bush that is required Q
Part Code
De
Dp
82-15-2012:MECRO
133
82-17-2517:MECRO
149
82-19-2517:MECRO
d1
A
122.17
2012
47.7
138.22
2517
47.7
165.2
154.33
2517
47.7
82-21-3020:MECRO
181.2
170.43
140
3020
51
82-23-3020:MECRO
197.5
186.53
140
3020
51
82-25-3020:MECRO
213.5
202.66
140
3020
51
82-27-3020:MECRO
229.6
218.79
140
3020
51
82-30-3020:MECRO
254
243
140
3020
51
232
dm
Part Code
De
Dp
d1
A
83-17-2517:MECRO
149
138.22
dm
2517
79.6
83-19-3020:MECRO
165.2
154.33
3030
79.6
83-21-3020:MECRO
181.2
170.43
3030
79.6
83-23-3525:MECRO
197.5
186.53
159
3535
89
83-25-3525:MECRO
213.5
202.66
175
3535
89
Q Q
Suitable for 1 1/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
10DR17:MECRO
187.9
"172
78"
120
25
10DR19:MECRO
208.1
192.91
120
25
80
10DR23:MECRO
248.3
233.17
140
25
80
FREE 24/7 technical support – Tel: 0870 240 2100
80
Q Q
1 1/2" Duplex Sprockets - Pilot Bore
Suitable for 1 1/4" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
Keyway Width (mm)
Keyway Depth (mm)
1210-22:MECRO
6
2.8
1210-24:MECRO
8
3.3
1210-25:MECRO
8
3.3
1210-28:MECRO
8
3.3
1210-30:MECRO
8
3.3
1210-32:MECRO
10
3.3
1610-16:MECRO
5
2.3
1610-19:MECRO
6
2.8
1610-20:MECRO
6
2.8
1610-22:MECRO
6
2.8
1610-24:MECRO
8
3.3
1610-25:MECRO
8
3.3
1610-28:MECRO
8
3.3
1610-30:MECRO
8
3.3
1610-32:MECRO
10
3.3
1610-35:MECRO
10
3.3
1610-38:MECRO
10
3.3
1610-40:MECRO
12
3.3
1610-42:MECRO
12
2.2
2012-19:MECRO
6
2.8
2012-20:MECRO
6
2.8
2012-22:MECRO
6
2.8
2012-24:MECRO
8
3.3
2012-25:MECRO
8
3.3
2012-28:MECRO
8
3.3
2012-30:MECRO
8
3.3
2012-32:MECRO
10
3.3
2012-35:MECRO
10
3.3
Taper Bore Bushes
2012-38:MECRO
10
3.3
2012-40:MECRO
12
3.3
Taper Bore Bushes - Metric
2012-42:MECRO
12
3.3
2012-45:MECRO
14
3.8
2012-48:MECRO
14
3.8
2012-50:MECRO
14
3.8
2517-25:MECRO
8
3.3
2517-28:MECRO
8
3.3
2517-30:MECRO
8
3.3
2517-32:MECRO
10
3.3
2517-35:MECRO
10
3.3
2517-38:MECRO
10
3.3
2517-40:MECRO
12
3.3
2517-42:MECRO
12
3.3
2517-45:MECRO
14
3.8
2517-48:MECRO
14
3.8
2517-50:MECRO
14
3.8
2517-55:MECRO
16
4.3
2517-60:MECRO
18
4.4
3020-30:MECRO
8
3.3
3020-35:MECRO
10
3.3
3020-38:MECRO
10
3.3
3020-40:MECRO
12
3.3
3020-42:MECRO
12
3.3
3020-45:MECRO
14
3.8
3020-48:MECRO
14
3.8
3020-50:MECRO
14
3.8
3020-55:MECRO
16
4.3
3020-60:MECRO
18
4.4
3020-65:MECRO
18
4.4
3020-70:MECRO
20
4.9
3020-75:MECRO
20
4.9
3535-48:MECRO
14
3.8
3535-50:MECRO
14
3.8
3535-55:MECRO
16
4.3
3535-60:MECRO
18
4.4
3535-65:MECRO
18
4.4
3535-70:MECRO
20
4.9
3535-75:MECRO
20
4.9
3535-80:MECRO
22
5.4
Q Q
Suitable for 1 1/2" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
De
Dp
dm
d1
A
Part Code
De
Dp
dm
d1
A
10TR17:MECRO
187.9
172.78
120
25
115
12DR15:MECRO
198.2
183.26
132
25
100
10TR19:MECRO
208.1
192.91
120
25
115
12DR19:MECRO
246.5
231.49
160
25
100
10TR21:MECRO
228.2
213.04
140
25
115
12DR25:MECRO
319
304
160
25
100
1 1/2" Simplex Sprockets - Pilot Bore
Q Q
Suitable for 1 1/2" pitch roller chain Minimum bore allowing reworking for large bore and keyway
Part Code
Keyway Width (mm)
Keyway Depth (mm)
1008-12:MECRO
4
1.8
1008-14:MECRO
5
2.3
1008-16:MECRO
5
2.3
1008-19:MECRO
6
2.8
1008-20:MECRO
6
2.8
1008-24:MECRO
8
2
1008-25:MECRO
8
1.3
1108-10:MECRO
3
1.4
1108-11:MECRO
4
1.8
Part Code
De
Dp
dm
d1
A
1108-12:MECRO
4
1.8
12SR9:MECRO
126.4
111.4
70
20
45
1108-14:MECRO
5
2.3
12SR10:MECRO
138
123.29
80
20
45
1108-16:MECRO
5
2.3
12SR13:MECRO
174.2
159.18
114
25
50
1108-18:MECRO
6
2.8
12SR15:MECRO
198.2
183.26
132
25
50
1108-19:MECRO
6
2.8
12SR17:MECRO
222.3
207.34
136
25
55
1108-20:MECRO
6
2.8
12SR19:MECRO
246.5
231.49
136
25
55
1108-24:MECRO
8
3.3
12SR21:MECRO
270.6
255.65
150
25
60
1108-25:MECRO
8
3.3
12SR25:MECRO
319
304
150
25
60
1108-28:MECRO
8
2
12SR30:MECRO
379.5
364.5
150
30
60
1210-12:MECRO
4
1.8
1210-14:MECRO
5
2.3
1210-15:MECRO
5
2.3
1210-16:MECRO
5
2.3
1210-19:MECRO
6
2.8
1210-20:MECRO
6
2.8
Contact Brammer on 0870 240 2100
Chain Drives
18 Chain Drives
1 1/4" Triplex Sprockets - Pilot Bore
233
Part Code
Keyway Width (mm)
Keyway Depth (mm)
Part Code
Keyway Width (inch)
Keyway Depth (inch)
3535-85:MECRO
22
5.4
3020-1-3/4:MECRO
0.437
0.156
3535-90:MECRO
25
5.4
3020-1-7/8:MECRO
0.5
0.156
4040-70:MECRO
20
4.9
3020-2:MECRO
0.5
0.156
4040-80:MECRO
22
5.4
3020-2-1/8:MECRO
0.625
0.218
4040-90:MECRO
25
5.4
3020-2-1/4:MECRO
0.625
0.218
4040-100:MECRO
28
6.4
3020-2-1/2:MECRO
0.625
0.218
4545-80:MECRO
22
5.4
3020-2-3/4:MECRO
0.75
0.25
4545-85:MECRO
22
5.4
3020-3:MECRO
0.75
0.218
4545-100:MECRO
28
6.4
3535-1-3/4:MECRO
0.437
0.156
5050-100:MECRO
28
6.4
3535-2:MECRO
0.5
0.156
5050-110:MECRO
28
6.4
3535-2-1/4:MECRO
0.625
0.218
5050-125:MECRO
32
7.4
3535-2-1/2:MECRO
0.625
0.218
3535-3:MECRO
0.75
0.25
4040-4:MECRO
1
0.25
8 Chain Drives
Taper Bore Bushes - Imperial
ETP Express Locking Bushes
Trantorque Keyless Bush
Locking bushes. Shafts 15-55mm ETP-EXPRESS locking bushes Q ETP locking bushes connect hubs, sprockets, pulleys and gears to shafts without keyways and collars Q Single radial fixing screw for ultra-fast fixing Q Automatic release without sticking Q Infinite axial & radial adjustment Q Shaft/hub machine tolerances h7/H7 Q High concentricity 0.03mm Q Temperature range -30 to +85°C Q Shafts up to 100mm available on request Q Min hub external diameter should be 1.5 x C if steel, 2.5 x C if aluminium Q Stainless steel & corrosion protected models on request Q Q
Part Code
Keyway Width (inch)
Keyway Depth (inch)
1008-5/8:MECRO
0.187
0.093
1008-3/4:MECRO
0.187
0.093
1008-1:MECRO
0.25
0.125
1108-5/8:MECRO
0.187
0.093
1108-3/4:MECRO
0.187
0.093
1108-1:MECRO
0.25
0.125
1210-1/2:MECRO
0.125
0.062
1210-5/8:MECRO
0.187
0.093
1210-3/4:MECRO
0.187
0.093
1210-7/8:MECRO
0.25
0.125
1210-1:MECRO
0.25
0.125
1210-1-1/8:MECRO
0.312
0.125
1210-1-1/4:MECRO
0.312
0.125
1610-5/8:MECRO
0.187
0.093
TTQM0516
5
1610-3/4:MECRO
0.187
0.093
TTQM0616
1610-7/8:MECRO
0.25
0.125
1610-1:MECRO
0.25
1610-1-1/8:MECRO
Product Code
Bore mm
Rated torque Nm
Max radial A force kN
C
E
Q
ETP15-EXPRESS
15
46
0.5
46
18
39
Q
ETP19-EXPRESS
19
85
1.0
50.5
23
42
ETP20-EXPRESS
20
110
1.0
51.5
24
44
ETP24-EXPRESS
24
190
1.4
57.5
29
47
ETP25-EXPRESS
25
230
1.5
58
30
49
ETP28-EXPRESS
28
280
1.8
63
34
52
ETP30-EXPRESS
30
380
2.0
64.5
36
54
32
440
2.2
68.5
39
56
Zero backlash - due to the shrink fit, longer life and reliability No keyway required - no weak spot in the shaft Q Single nut tightening - quick and easy installation Q Infinite postioning allowed - precise axial or radial postioning Q Highly concentric - self centering occures eliminating hub cocking during installation Trantorque Mini Component Length mm
Overall length mm
ETP32-EXPRESS ETP35-EXPRESS
35
640
2.5
73
42
59
16
19
10
ETP38-EXPRESS
38
890
2.8
84.5
46
72
6
16
19
10
ETP40-EXPRESS
40
1100
3.0
86.5
48
75
TTQM0720
7
20
22
11
ETP50-EXPRESS
50
1900
4.5
98.5
60
80
0.125
TTQM0820
8
20
22
11
ETP55-EXPRESS
55
2400
5.0
106
67
85
0.312
0.125
TTQM0920
9
20
22
11
1610-1-1/4:MECRO
0.312
0.125
TTQM1023
10
23
26
13
1610-1-3/8:MECRO
0.375
0.125
TTQM1123
11
23
26
13
1610-1-1/2:MECRO
0.375
0.125
TTQM1223
12
23
26
13
2012-3/4:MECRO
0.187
0.093
TTQM1426
14
26
29
16
2012-1:MECRO
0.25
0.125
TTQM1526
15
26
29
16
2012-1-1/8:MECRO
0.312
0.125
TTQM1626
16
26
29
16
2012-1-1/4:MECRO
0.312
0.125
2012-1-3/8:MECRO
0.375
0.125
2012-1-1/2:MECRO
0.375
0.125
2012-1-5/8:MECRO
0.437
0.156
Product Code Shaft mm
OD mm
2012-1-3/4:MECRO
0.437
0.156
Component Length mm
Overall length mm
2012-2:MECRO
0.5
0.125
TTQM1732
17
32
30
22
2517-1:MECRO
0.25
0.125
TTQM1832
18
32
30
22
2517-1-1/4:MECRO
0.312
0.125
TTQM1932
19
32
30
22
2517-1-1/2:MECRO
0.375
0.125
TTQM2035
20
35
33
24
2517-1-5/8:MECRO
0.437
0.156
TTQM2235
22
35
33
24
2517-1-3/4:MECRO
0.437
0.156
TTQM2438
24
38
35
25
2517-2:MECRO
0.5
0.156
TTQM2538
25
38
35
25
2517-2-1/4:MECRO
0.625
0.218
TTQM2845
28
45
41
29
2517-2-1/2:MECRO
0.625
0.187
TTQM3045
30
45
41
29
3020-1-1/4:MECRO
0.312
0.125
TTQM3250
32
50
44
30
3020-1-1/2:MECRO
0.375
0.125
TTQM3550
35
50
44
30
234
Product Code Shaft mm
OD mm
Trantorque Standard
Can’t see it here, just call 0870 240 2100
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100
ETP Classic Line Locking Bushes
Chain Drives
18
ETP-CLASSIC locking bushes. Shafts 15-60mm ETP-CLASSIC locking bushes are a well known solution for fixing hubs, sprockets, pulleys and gears to shafts without the use of keyways or collars Q Easy fitting and removal with axial setting screws Q Low tightening torques Q No backlash or fretting Q Infinite axial & radial adjustment Q Radial concentricity 0.04mm Q Temperature range -30 to +85°C Q Shafts up to 100mm available on request Q Min hub external diameter should be 1.7 x C if steel, 2.7 x C if aluminium Q Stainless steel & corrosion protected models on request Q Q
Product Code
Bore mm Rated torque Nm
Max radial A force kN
C
F
ETP15
15
55
7.3
38
23
35
ETP19
19
100
10.6
45
28
42
ETP20
20
125
12.5
45
28
42
ETP24
24
200
16.7
49
34
45
ETP25
25
250
20.0
49
34
48
ETP28
28
300
21.4
55
39
50
ETP30
30
420
28
57
41
52
ETP32
32
420
26.3
60
43
57
ETP35
35
650
37.1
63
47
60
ETP38
38
750
39.5
65
50
64
ETP40
40
940
47
70
53
68
ETP42
42
940
44.5
70
55
70
ETP50
50
1900
76
83
65
82
ETP60
60
3400
113
95
77
96
Contact Brammer on 0870 240 2100
Chain Drives
235
Manufacture, process and supply
plastic, insulation and rubber products to industry
Excellence in Plastic Engineering for Industry
PAR Group has over 30 years of experience serving clients in the UK, Europe and Worldwide. We have our own rubber moulding, converting, CNC machining, plastic fabrication, plastic forming, welding and stitching facilities. Additionally we also supply an extensive range of engineering plastics,
insulation and rubber products. Having achieved ISO 9001 accreditation, PAR Group always strives for excellence in service and quality. With vast experience in rubber and plastics engineering, we are renowned for our ability to provide solutions to unusual and difficult applications.
Engineering Plastic Materials We stock an extensive range of plastic sheet, rod and tube in various materials including machining, fabrication and specialist plastics. Our CNC saw facilities enable us to cut sheets up to 4000mm x 4000mm and up to a maximum thickness of 147mm. For rods, our automatic band saw provides a billeting service for up to 300mm diameter. Below are our most popular types of engineering plastics. $FHWDO&RSRO\PHU $FHWDO+RPRSRO\PHU $%6 $FU\OLF )RRG$SSURYHG +'3( /'3(
0HWDO'HWHFWDEOH 1\ORQ 3((. 3(7* 3RO\FDUERQDWH 3RO\HWK\OHQH
3RO\SURS\OHQH 37)( 39& 39') 8+0: 9HVSHO ®
Extruded Wear Strips Wear strips are commonly used to prevent chain or belt movement and reduce vibration which can increase bearing and motor loads. We have the facilities to extrude Corrothene®8+0:ZHDUVWULSVWRDOPRVWDQ\SURILOH:HKDYHWRROV for a wide range of standard profiles along with in-house tool making facilities enabling us to extrude bespoke wear strips to your exact requirements.
Nylon Casting 1\ORQFDVWLQJLVLGHDOIRUPDQXIDFWXULQJODUJHVKHHWVURGVRUWXEHVWKDWDUHQRWUHDGLO\DYDLODEOH7KLV manufacturing process is also suitable for producing the same plastic component required on a regular ® basis. At our IAC Plastics division we manufacture our own brand of CorromideFDVW1\ORQLQURGV sheets and tubes. We hold tooling for a range of standard sizes and also offer a custom Nylon casting service for specific customer requirements. We offer various Nylon grades and have ultra-sonic detection equipment enabling us to carry out inspections on all castings for any voids and porosity.
www.par-group.co.uk
Manufacture, process and supply
plastic, insulation and rubber products to in ndustry
Excellence in Plastic Engineering for Industry Plastic Machining PAR Group manufacture machined plastic components using highly advanced CNC machining technology. We have an extensive range of manufacturing facilities including CNC machining, cutting, routing, lathing, drilling and milling. We also have a team of KLJKO\ H[SHULHQFHG HQJLQHHUV DQG &$' technology, enabling us to precision engineer components to your exact requirements.
Examples of our work:
Machined Component
Scraper
Machined Wear Strips
Scrolls / Wormfeeds
Plastic Cover
Plastic Cover
Plastic Fabrication We have the facilities to fabricate, form, bend, weld, bond and polish a wide range of plastics. We commonly work with plastic PDWHULDOV VXFK DV 3RO\FDUERQDWH 3(7* Acrylic/Perspex®, 3RO\SURS\OHQH 39& DQG Polyethylene. We can flame polish the edges of certain plastic types for applications where aesthetics are an important factor.
Examples of our work:
Machine Guard
Plastic Chute
Contact Us
For further details contact your nearest Brammer Sales & Service Centre on 0870 240 2100
www.par-group.co.uk
