Centrifugal pumps type T
Version 04-2015
Content
Layout and areas of application for the KNOLL centrifugal pump......................................................................... 3 Pump overview................................................................................................................................................................. 4 Type key and standard multirange motors................................................................................................................. 5 Clean coolant pump TG 20............................................................................................................................................ 6 Clean coolant pump TG 25............................................................................................................................................ 8 Clean coolant pump TG 30..........................................................................................................................................10 Clean coolant pump TG 31...........................................................................................................................................12 Clean coolant pump TG 32..........................................................................................................................................14 Clean coolant pump TG 40..........................................................................................................................................16 Clean coolant pump TG 50..........................................................................................................................................18 Dirt coolant pump TF 40..............................................................................................................................................20 Dirt coolant pump TF 50...............................................................................................................................................22 Dirt coolant pump TS 40..............................................................................................................................................24 Dirt coolant pump TSK 40............................................................................................................................................26 Dirt coolant pump TSK 65............................................................................................................................................28 Shredder pump TSC 65................................................................................................................................................30
2
Centrifugal pumps
KNOLL centrifugal pumps are submersible pumps. They are mounted on pressureless containers and submersed in the fluid. These flow machines are used primarily on machine tools to convey cooling lubricants. As backflow pumps, they transport the chips/cooling lubricant mixture to filters/separators. They then supply the machines again with the cleaned cooling lubricant. Thanks to their solid and robust construction, the KNOLL coolant pumps have a high load capacity and a long service life. There are 5 different configurations: Type TG with closed impeller For cleaned cooling lubricant with residual dirt Type TF with non-clogging impeller For contaminated cooling lubricant Type TS with helical impeller For contaminated cooling lubricant with air Type TSK with short helical impeller For contaminated cooling lubricant with short chips Type TSC with helical impeller and chopper For contaminated cooling lubricant with long aluminum chips
Centrifugal pumps
3
Clean coolant pump type TG Delivery rate Q [l/min] 0
100
200
300
400
500
600
700
800
900
42
48
54
1.000 1.100 1.200 1.300 1.400 1.500 1.600
60
TG 32 50
TG 25 40
TG 40
30
Delivery head H [m]
TG 30 TG 50
20
10
TG 31 0
TG 20 0
6
12
18
24
30
36
60
66
72
78
84
90
96
Delivery rate Q [m³/h]
Dirt cooling lubricant pump types TF, TS, TSK, TSC Delivery rate Q [l/min] 60
0
100
200
300
400
500
600
700
800
900
1.000
18
24
30
36
42
48
54
60
1.100 1.200 1.300 1.400 1.500 1.600
50
40 TSK 65
Delivery head H [m]
30
TF 50
20
TSC 65 TF 40, TS 40 TSK 40
10
0
0
6
12
66
72
78
84
90
96
Delivery rate Q [m³/h]
4
Centrifugal pumps
Type code Submersible pump type Model Impeller index Motor power x 10 Immersion depth in mm
TSC 65–63 / 75 360
Application example TSC 65-63 / 75 360 TSC Submersible pump type 65 Size 63 Impeller index Ø 163 mm 75 Motor power 7.5 kW 360 Immersion depth 360 mm
Drives Standard multirange motors Three-phase motor 2-pole, heat class ISO-F, protection type IP54, IE2 0.37 kW to 3.0 kW 230 V (∆) / 400 V (Υ), 50 Hz, 2,900 min-¹ 265 V (∆) / 460 V (Υ), 60 Hz, 3,500 min-¹
4.0 kW to 7.5 kW 400 V (∆) / 690 (Υ), 50 Hz, 2,900 min-¹ 460 V (∆), 50 Hz, 3,500 min-¹
Other voltages and efficiency classes on request.
Technical data for the IEC/EN 60034 standard Switch-on frequency: In order to minimize the stress to the pump and motor, the switch-on frequency should not exceed once per minute. When switching the pump on and off at shorter intervals, allow it to reach full speed. Rated power 0.1 kW to 2.6 kW 3.0 kW to 5.5 kW 7.5 kW to 10.0 kW > 10.0 kW
Switch frequency 60 x / hour 40 x / hour 20 x / hour 15 x / hour
Note: The following characteristic curves refer to 50 Hz speed and cooling lubricant (emulsion) with 1 mm²/s. Characteristic curves for other media, speeds, and viscosities on request.
Centrifugal pumps
5
TG 20 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Open impeller - Impeller material GJL-200
130
115
90°
40
H
Fluid level
Rp 3/4"
7
Maximum performance data Air portion 10 Vol.-% Delivery rate 100 l/min Delivery head 6.5 m Particle size 1 mm Chip length 3 mm
25
100
70
Minimum level
6
20
min. fluid level
50
T
117
99
TG 20 clean coolant pump Centrifugal pumps
Characteristic curves 7,5
Förderstrom Delivery rate 0
[l/min] Q Q[l/min] 20
40
60
80
100
4,8
6
6,0
4,5
Ø74
Delivery head HH[m] [m] Förderhöhe
3,0
Ø71 1,5
0,0 0,4
0,3
Power consumption P [kW] Leistungsbedarf P [kW]
Ø74
Ø71
0,2
0,1
0,0
0 Förderstrom
1,2 Q [m³/h]
2,4
3,6
Delivery rate Q [m³/h]
Variants Type TG 20-71 / 03 220 TG 20-74 / 03 220 TG 20-71 / 03 350 TG 20-74 / 03 350
T H Weight Motor power [mm] [mm] [kg] [kW] 220 220 350 350
181 181 181 181
Centrifugal pumps TG 20 clean coolant pump
6,8 6,8 7,3 7,3
0,37 0,37 0,37 0,37
Noise level [dB(A)] 55 55 55 55
7
TG 25 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Very high efficiency thanks to favorably-shaped impeller for optimal flow behavior - Closed impeller - Impeller material GJL-250
253
12,5
350
182
Minimum level
8
40
12,5 65 500
T
min. fluid level
100
40
H
Fluid level
300
Rp 1"
11
Maximum performance data Air portion 10 Vol.-% Delivery rate 200 l/min Delivery head 59 m Particle size 1 mm Chip length 3 mm
NW 40
TG 25 clean coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 70
0
[l/min] QQ[l/min] 50
100
150
200
250
60
50
Ø208
40
30 Förderhöhe Delivery head H H [m] [m]
Ø195 Ø179
20
Ø168 Ø158
10
0 4
Ø208 Ø195
3
Leistungsbedarf Power consumptionP [kW] P [kW]
Ø179 Ø168 2
Ø158
1
0
0
3
6
9
12
15
Förderstrom [m³/h] Delivery rate Q Q [m³/h]
Variants Type TG 25-.. / 22 345 TG 25-.. / 30 345 TG 25-.. / 22 590 TG 25-.. / 30 590
T H Weight Motor power [mm] [mm] [kg] [kW] 345 345 590 590
320 350 320 350
Centrifugal pumps TG 25 clean coolant pump
47 49 51 53
2,2 3,0 2,2 3,0
Noise level [dB(A)] 62 66 62 66
9
TG 30 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Very high efficiency thanks to favorably-shaped impeller for optimal flow behavior - Closed impeller - Impeller material POM Maximum performance data Air portion 10 Vol.-% Delivery rate 350 l/min Delivery head 28 m Particle size 1 mm Chip length 3 mm
105
10
12,5
245
T
12,5 295
Rp 2" 60
Minimum level
min. fluid level
60
H
40
437
Fluid level
136
9
Rp 1 1/4"
TG 30 clean coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 35
[l/min] QQ[l/min]
0
100
200
300
400
30
25
20
Ø154 15 Förderhöhe [m] Delivery head HH[m]
Ø144 10
Ø124
Ø134
Ø114 5
Ø104 0 3
Ø154
Ø144
Leistungsbedarf Power consumptionPP[kW] [kW]
2
Ø134 Ø124
Ø114 1
Ø104
0
0
Delivery rate Q [m³/h] Förderstrom Q [m³/h]
Variants Type TG 30-.. / 07 285 TG 30-.. / 11 285 TG 30-.. / 15 285 TG 30-.. / 22 285 TG 30-.. / 07 533 TG 30-.. / 11 533 TG 30-.. / 15 533 TG 30-.. / 22 533 TG 30-.. / 15 781 TG 30-.. / 22 781
6
12
18
T H Weight Motor power [mm] [mm] [kg] [kW] 285 285 285 285 533 533 533 533 781 781
270 270 290 320 270 270 290 320 290 320
Centrifugal pumps TG 30 clean coolant pump
23 24 27 30 30 31 34 37 41 44
0,75 1,10 1,50 2,20 0,75 1,10 1,50 2,20 1,50 2,20
24
Noise level [dB(A)] 60 60 62 62 60 60 62 62 62 62
11
TG 31 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Open impeller - Impeller material GJL-200
Minimum level
12
30
30
180
160
90°
131
95
140
T
min. fluid level
60
40
H
Fluid level
Rp 1 1/4"
7
Maximum performance data Air portion 10 Vol.-% Delivery rate 300 l/min Delivery head 11 m Particle size 1 mm Chip length 3 mm
140
TG 31 clean coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 12
[l/min] Q Q[l/min]
0
50
100
150
200
250
300
15
18
10
8
6
Förderhöhe
Delivery head HH [m] [m]
Ø99 Ø89
4
2
0 1,0
Leistungsbedarf
Power consumptionP [kW] P [kW]
Ø99
Ø89 0,5
0,0
0
3
6
9
12
Delivery rate Q [m³/h] Förderstrom Q [m³/h]
Variants Type TG 31-89 / 07 200 TG 31-99 / 07 200 TG 31-89 / 07 350 TG 31-99 / 07 350 TG 31-89 / 07 550 TG 31-99 / 07 550
T H Weight Motor power [mm] [mm] [kg] [kW] 200 200 350 350 550 550
240 240 240 240 240 240
Centrifugal pumps TG 31 clean coolant pump
13,7 13,7 14,8 14,8 16,3 16,3
0,75 0,75 0,75 0,75 0,75 0,75
Noise level [dB(A)] 59 59 59 59 59 59
13
TG 32 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Very high efficiency thanks to favorably-shaped impeller for optimal flow behavior - Closed impeller - Impeller material GJL-250
165,5
269,5
11
Maximum performance data Air portion 10 Vol.-% Delivery rate 550 l/min Delivery head 60 m Particle size 2 mm Chip length 4 mm
12,5
40
221
H
Fluid level
350
Rp 1 1/4"
Minimum level
14
50
65 500
T
min. fluid level
110
12,5
NW 50
TG 32 clean coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 70
0
[l/min] QQ[l/min] 100
200
300
400
500
600
700
60
50
40
Förderhöhe [m] Delivery head HH[m]
30
Ø202
Ø209
20
Ø186
Ø192
Ø178 Ø166 Ø174
10
0 10
Ø209 8
Ø202 Ø192
Leistungsbedarf Power consumptionP P[kW] [kW]
6
Ø186 Ø178 Ø174
4
Ø166
2
0
0
6
12
Delivery rate Q [m³/h] Förderstrom Q [m³/h]
Variants Type TG 32-.. / 55 400 TG 32-.. / 75 400 TG 32-.. / 55 700 TG 32-.. / 75 700
18
24
30
36
T H Weight Motor power [mm] [mm] [kg] [kW] 400 400 700 700
370 370 370 370
Centrifugal pumps TG 32 clean coolant pump
100 106 127 133
5,5 7,5 5,5 7,5
42
Noise level [dB(A)] 72 72 72 72
15
TG 40 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Properties - No seal - Extended, overhung motor shaft with circlip - Very high efficiency thanks to favorably-shaped impeller for optimal flow behavior - Closed impeller - Impeller material POM/GJL-250 - Optionally with installed inducer, for improvement of the intake behavior in case of coolant containing a lot of air Maximum performance data Air portion 10 Vol.-% (15 Vol.-% with inducer) Delivery rate 400 l/min Delivery head 32 m Particle size 3 mm Chip length 6 mm
105
12,5
245
H
12,5 295
T
min. fluid level
120
40
16
60
Minimum level
422
Fluid level
136
9
Rp 1 1/2"
Rp 2"
TG 40 clean coolant pump Centrifugal pumps
Characteristic curves
Power consumption P [kW]
Delivery head H [m]
Delivery rate Q [l/min]
Delivery rate Q [m³/h]
Variants Type TG 40-.. / 11 285 TG 40-.. / 15 285 TG 40-.. / 22 285 TG 40-.. / 30 285 TG 40-.. / 11 533 TG 40-.. / 15 533 TG 40-.. / 22 533 TG 40-.. / 30 533 TG 40-.. / 15 781 TG 40-.. / 22 781 TG 40-.. / 30 781
T H Weight Motor power [mm] [mm] [kg] [kW] 285 285 285 285 533 533 533 533 781 781 781
270 290 320 350 270 290 320 350 290 320 350
Centrifugal pumps TG 40 clean coolant pump
25 28 31 35 32 35 38 42 42 45 49
1,1 1,5 2,2 3,0 1,1 1,5 2,2 3,0 1,5 2,2 3,0
Noise level [dB(A)] 60 62 62 66 60 62 62 66 62 66 66
17
TG 50 Clean coolant pump
KNOLL clean coolant pumps of type TG are cooling lubricant pumps that convey slightly contaminated media. These pumps are in a position to supply machines with cleaned cooling lubricant (incl. residual dirt). Thanks to their solid and robust construction, the KNOLL centrifugal pumps have a high load capacity and a long service life. Properties - No seal - Extended, overhung motor shaft with circlip - Very high efficiency thanks to favorably-shaped impeller for optimal flow behavior - Closed impeller - Impeller material GJL-250 - Optionally with installed inducer, for improvement of the intake behavior in case of coolant containing a lot of air Maximum performance data Air portion 10 Vol.-% (15 Vol.-% with inducer) Delivery rate 1,400 l/min Delivery head 26 m Particle size 15 mm Chip length 25 mm
153
282
11
12,5
40
254
H
Fluid level
350
Rp 2"
Minimum level
18
65
500
T
min. fluid level
160
12,5 65
NW 65
TG 50 clean coolant pump
Centrifugal pumps
Characteristic curves Delivery rate Förderstrom 30
0
Q Q [l/min] [l/min] 200
400
600
800
1000
1200
1400
1600
25
20
15
Förderhöhe [m] Delivery head HH[m]
Ø142 10
Ø137 5
Ø128 Ø120 Ø110 0 8
Ø142 Ø137 6
Leistungsbedarf Power consumptionPP[kW] [kW]
Ø128 Ø120 4
Ø110
2
0 0,00 Förderstrom
12,00
24,00
36,00
48,00
60,00
72,00
84,00
96,00
Q [m³/h]
Delivery rate Q [m³/h]
Variants Type TG 50-.. / 40 480 TG 50-.. / 55 480 TG 50-.. / 40 840 TG 50-.. / 55 840
T H Weight Motor power [mm] [mm] [kg] [kW] 480 480 840 840
355 355 355 355
Centrifugal pumps TG 50 clean coolant pump
68 78 75 85
4,0 5,5 4,0 5,5
Noise level [dB(A)] 68 68 68 68
19
TF 40 Dirt coolant pump
KNOLL dirt coolant pumps of type TF are cooling lubricant pumps that convey contaminated coolant. These pumps are in a position to transport the chip/cooling lubricant mixture to filters or separators. Properties - No seal - Extended, overhung motor shaft with circlip - Non-clogging impeller - Impeller material POM/GJL-250 - Optionally with installed inducer, for improvement of the intake behavior in case of very contaminated coolants Maximum performance data Air portion 10 Vol.-% (15 Vol.-% with inducer) Delivery rate 650 l/min Delivery head 18 m Particle size 15 mm Chip length 40 mm Chip freight 2 g/l
136
Minimum level
20
60
12,5 295
T
min. fluid level
110
12,5
H
40
432
Fluid level
245
105
9
Rp 1 1/2"
Rp 2"
TF 40 dirt coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 20
0
[l/min] QQ[l/min] 100
200
300
400
500
600
700
16
12
Ø115 8
Förderhöhe
Delivery head H [m]
H [m]
Ø105
4
Ø95 Ø75 Ø65 Ø85
Ø80 0 4
Ø115 Ø105
3
Leistungsbedarf [kW] Power consumption PP [kW]
Ø95 Ø85
2
Ø80
1
Ø75 Ø65
0
0
6
12
18
24
30
36
42
Förderstrom [m³/h] Delivery rate Q Q [m³/h]
Variants
Type TF 40-.. / 07 330 TF 40-.. / 11 330 TF 40-.. / 15 330 TF 40-.. / 22 330 TF 40-.. / 30 330 TF 40-.. / 07 578 TF 40-.. / 11 578 TF 40-.. / 15 578 TF 40-.. / 22 578 TF 40-.. / 30 578 TF 40-.. / 15 826 TF 40-.. / 22 826 TF 40-.. / 30 826
T [mm] 330 330 330 330 330 578 578 578 578 578 826 826 826
Centrifugal pumps TF 40 dirt coolant pump
H [mm] 270 270 290 320 350 270 270 290 320 350 290 320 350
Weight [kg] 26 27 30 33 37 33 34 37 40 44 44 47 51
Motor power [kW] 0,75 1,10 1,50 2,20 3,00 0,75 1,10 1,50 2,20 3,00 1,50 2,20 3,00
Noise level [dB(A)] 60 60 62 62 66 60 60 62 62 66 62 62 66
21
TF 50 Dirt coolant pump
KNOLL dirt coolant pumps of type TF are cooling lubricant pumps that convey very contaminated coolant. These pumps are in a position to transport the chip/cooling lubricant mixture to filters or separators. Properties - No seal - Extended, overhung motor shaft with circlip - Non-clogging impeller - Impeller material GJL-250 - Optionally with installed inducer, for improvement of the intake behavior in case of coolant containing a lot of air Maximum performance data Air portion 10 Vol.-% (15 Vol.-% with inducer) Delivery rate 1,200 l/min Delivery head 26 m Particle size 30 mm Chip length 70 mm Chip freight 5 g/l
180
40
12,5
H
Fluid level
350
442
255
11
Rp 2"
Minimum level
22
75
500
T
min. fluid level
150
12,5
Rp 1 1/2"
TF 50 dirt coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 30
[l/min] QQ[l/min]
0
200
400
600
800
1000
25
Ø140
20
Ø130
15
Förderhöhe H [m] Delivery head H [m]
Ø120 10
Ø110 5
Ø100
0 10
8
Ø120 Ø140
Ø130 Ø110
Leistungsbedarf [kW] Power consumption PP[kW]
6
Ø100 4
2
0
0
12
24
Delivery rate Q [m³/h] Förderstrom Q [m³/h]
Variants Type TF 50-.. / 40 488 TF 50-.. / 55 488 TF 50-.. / 40 848 TF 50-.. / 55 848
36
48
T H Weight Motor power [mm] [mm] [kg] [kW] 488 488 848 848
355 355 355 355
Centrifugal pumps TF 50 dirt coolant pump
68 75 78 85
4,0 5,5 4,0 5,5
60
Noise level [dB(A)] 68 68 68 68
23
TS 40 Dirt coolant pump
KNOLL dirt coolant pumps of type TS are cooling lubricant pumps that convey very contaminated coolant. These pumps are in a position to transport the chip/cooling lubricant mixture to filters or separators. Properties - No seal - Extended, overhung motor shaft with circlip - High load capacity due to solid shaft-hub connection - Helical impeller - Impeller material ST - With integrated inducer, for improvement of the intake behavior in case of very contaminated coolants Maximum performance data Air portion 50 Vol.-% Delivery rate 550 l/min Delivery head 18 m Particle size 12 mm Chip length 20 mm Chip freight 2 g/l
Rp 1 1/2"
Minimum level
24
60
12,5
245
12,5 295
T
min. fluid level
110
H
40
433
Fluid level
136
9
105
Rp 2"
TF 40 dirt coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 20
[l/min] QQ[l/min]
0
100
200
300
400
500
600
16
12
Ø121
Förderhöhe H [m] Delivery head H [m]
8
4
0 4
Ø121
Leistungsbedarf [kW] Power consumption PP[kW]
3
2
1
0
0
6
12
18
24
30
36
Förderstrom [m³/h] Delivery rate Q Q [m³/h]
Variants Type TS 40-21 / 22 338 TS 40-21 / 30 338 TS 40-21 / 22 586 TS 40-21 / 30 586 TS 40-21 / 22 834 TS 40-21 / 30 834
T H Weight Motor power [mm] [mm] [kg] [kW] 338 338 586 586 834 834
320 350 320 350 320 350
Centrifugal pumps TF 40 dirt coolant pump
33 37 40 44 47 51
2,2 3,0 2,2 3,0 2,2 3,0
Noise level [dB(A)] 62 66 62 66 62 66
25
TSK 40 Dirt coolant pump
KNOLL dirt coolant pumps of type TSK are cooling lubricant pumps that convey very contaminated coolant. These pumps are in a position to transport the chip/cooling lubricant mixture with abrasive chips to filters or separators. Properties - No seal - Extended, overhung motor shaft with circlip - High load capacity due to solid shaft-hub connection - Wear-resistant components - Helical impeller - Impeller material ST Maximum performance data Air portion 30 Vol.-% Delivery rate 600 l/min Delivery head 17 m Particle size 20 mm Chip length 40 mm Chip freight 5 g/l
Minimum level
26
70
12,5
428
12,5 295
T
min. fluid level
80
H
40
Fluid level
136
245
105
9
Rp 1 1/2"
70
TSK 40 dirt coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 20
[l/min] QQ[l/min]
0
100
200
300
400
500
600
16
12
Ø121
Förderhöhe
H [m]
Delivery head H [m]
8
Ø111 4
Ø101 Ø91 0 4
Ø121 3
Leistungsbedarf Power consumptionP P[kW] [kW]
Ø111 2
Ø101 Ø91 1
0
0
6
12
Förderstrom [m³/h] Delivery rate Q Q [m³/h]
Variants Type TSK 40-.. / 22 310 TSK 40-.. / 30 310 TSK 40-.. / 22 558 TSK 40-.. / 30 558 TSK 40-.. / 22 806 TSK 40-.. / 30 806
18
24
30
T H Weight Motor power [mm] [mm] [kg] [kW] 310 310 558 558 806 806
320 350 320 350 320 350
Centrifugal pumps TSK 40 dirt coolant pump
33 37 40 44 47 51
2,2 3,0 2,2 3,0 2,2 3,0
36
Noise level [dB(A)] 60 60 60 60 62 62
27
TSK 65 Dirt coolant pump
KNOLL dirt coolant pumps of type TSK are cooling lubricant pumps that convey very contaminated coolant. These pumps are in a position to transport the chip/cooling lubricant mixture with abrasive chips to filters or separators. Properties - Energy-efficient when used with frequency inverter - Flexible layout with standard motors - No seal - Wear-resistant components - Half-open impeller - Impeller material ST - With upstream inducer, for improvement of the intake behavior in case of coolant containing a lot of air
197
210
13
Maximum performance data Air portion 30 Vol.-% Delivery rate 1,500 l/min Delivery head 38 m Particle size 20 mm Chip length 40 mm Chip freight 10 g/l
Rp 2 1/2"
40
121
12,5
350
H
Fluid level
12,5
Minimum level
28
100
T
min. fluid level
80
500
97
TSK 65 dirt coolant pump Centrifugal pumps
Characteristic curves Förderstrom Delivery rate 50
0
[l/min] QQ[l/min] 200
400
600
800
1000
1200
1400
1600
40
30
Förderhöhe
Delivery head H [m]
H [m]
20
10
Ø193 Ø178 Ø163 Ø150 0 8
Ø193
6
Leistungsbedarf Power consumptionPP[kW] [kW]
Ø178
4
Ø163 Ø150
2
0
0
12
Förderstrom [m³/h] Delivery rate Q Q[m³/h]
Variants Type TSK 65-.. / 55 482 TSK 65-.. / 75 482 TSK 65-.. / 55 842 TSK 65-.. / 75 842
24
36
48
60
72
T H Weight Motor power [mm] [mm] [kg] [kW] 482 482 842 842
410 450 410 450
Centrifugal pumps TSK 65 dirt coolant pump
110 120 140 150
5,5 7,5 5,5 7,5
84
96
Noise level [dB(A)] 68 68 68 68
29
TSC 65 Shredder pump
KNOLL shredder pumps of type TSC are cooling lubricant pumps with an integrated chopper for aluminum chips. The pumps are in a position to shred long aluminum chips to a pump-appropriate size and convey them with cooling lubricant to the central preparation station. An additional chip reducer is therefore superfluous. Properties - Energy-efficient when used with frequency inverter - Flexible layout with standard motors - Bearing protected by rotary shaft seal - Rigid shaft due to bearing of the cutting head in a ceramic precision bearing - Durable and low-maintenance due to hardened hydraulic and reducer components - Half-open impeller - Impeller material ST Maximum performance data Air portion 25 Vol.-% Delivery rate 1,000 l/min Delivery head 20 m Chip thickness 0.5 mm Chip freight 10 g/l Container design Minimum volume 250 l Minimum wall thickness 5 mm
150
Minimum level
20 20
350
150
H
G2 1/2"
20 230
T
min. fluid level
210
500
100
300
40 °- 6 0°
30 (170*) Fluid level
197
* Dimension valid for TSC 65-../.. 500
30
TSC 65 shredder pump Centrifugal pumps
Characteristic curves Delivery rate Förderstrom 25
QQ[l/min] [l/min]
0
200
400
600
800
1000
20
15
Förderhöhe
Delivery head H [m]
H [m]
10
Ø163
5
Ø150 0 8
6
Leistungsbedarf P [kW] Power consumption P [kW]
Ø163 Ø150 4
2
0
0 12 Förderstrom Q [m³/h] Delivery rate Q [m³/h]
Variants Type TSC 65-50/55 360 TSC 65-63/75 360 TSC 65-50/55 500 TSC 65-63/75 500
24
36
48
60
T H Weight Motor power [mm] [mm] [kg] [kW] 363 363 501 501
573 573 425 425
Centrifugal pumps TSC 65 shredder pump
110 110 110 110
5,5 7,5 5,5 7,5
31
Right reserved to modify technical details.
T 86888
KNOLL Maschinenbau GmbH Schwarzachstraße 20 DE-88348 Bad Saulgau Tel. + 49 (0) 75 81/20 08-0 Fax + 49 (0) 75 81/20 08-140
[email protected] www.knoll-mb.de