CEAS 2015: Conference programme Technical sessions Main Auditorium Monday 7 September 2015 10:00 - 11:00 11:30 - 12:30 13:30 - 14:30
14:30 - 16:00
Franco
Eco Design & Space
62 Ecodesign for space and aerospace: what happens when we make ecodesign relevant for demanding applications?
Senate room
van Hasselt room
Commission room 3
Commission room 2
Commission room 4
Opening ceremony Keynote 'Challenges for the European Aeronautical Industry' Jean Botti (CTO Airbus) & Hans Buethker (Chairman & CEO Fokker Technologies) Keynote 'Challenges for European Access to Space' Ongaro (Director TEC & head ESA-ESTEC) & Arnaud de Jong (CEO Airbus Defense and Space Netherlands) EU-project Pulsed Chemical Rocket with Green High Aircraft Design Remotely Piloted Flight Control 1 Aerodynamics Performance Methodology 1 Aircraft Systems 1 Propellants (PulCheR) workshop 41 187 37 18 Continuous Measurement of A multidisciplinary Fuselage Perceived Comparative study design optimization aerodynamic drag Visual/Inertial Motion of European RPAS ? advisory system for prediction method by Coherence in a regulations aircraft design cfd Motion Simulator
Pettersen, Johan Berg (Asplan Viak)
Hoogreef, Maurice (Delft University of Technology)
Bergsdal, H. (Asplan Viak), Bjørnbet, M.M. (Sintef Raufoss Manufacturing), Silva, E.J. (ISQ),
D'Ippolito,R. (Noesis Solutions), La Rocca, G. (Delft University of Technology)
Cleij, Diane (Max Planck Institute for Biological Cybernetics) Venrooij, J. (Max Planck Institute for Biological Cybernetics), Pretto, P. (Max Planck 1
Della Vecchia, Pierluigi (University of Naples Federico II"")
Cuerno-Rejado, Cristina (Technical University of Madrid)
Nicolosi, F., Ciliberti, D., Cusati, V. (University of Naples)
Sanchez-Carmona, A. (Universidad Politécnica de Madrid)
CEAS 2015: Conference programme Technical sessions Main Auditorium Ringen, G. (Sintef Raufoss Manufacturing), Estrela, M.A. (ISQ)
Senate room
van Hasselt room Institute for Biological Cybernetics), Pool, D.M. (Delft University of Technology), Mulder, M. (Delft University of Technology), Bülthoff, H.H. (Max Planck Institute for Biological Cybernetics) 87
140
125
Eco-Space Project Environmental Impact of new technologies
Global-local Knowledge Coupling to Support Airframe Design
On the minimization of cruise drag due to pitch trim
Saint-Amand, Maud (Airbus Defence and Space)
Wang, Haiqiang (Delft University of Technology)
Campos, Luis (Instituto Superior Técnico)
Berens, Thomas (Airbus Defence and Space)
GoetzendorfGrabowski, Tomasz (Warsaw University of Technology)
Ouziel, J.O. (Airbus Defence & Space)
La Rocca, G. (Delft University of technology), Nicolosi, F., Attanasio, L. (University of Naples
Marques, J.M.G.M. (Instituto Superior Técnico)
Delot, A.L. (ONERA), Tormalm, M.M. (Swedish Defence Research Agency (FOI)), RuizCalavera, L.P.,
Rodzewicz, M.R. (Warsaw University of Technology)
2
Commission room 3
Commission room 2
74 Numerical and Experimental Investigations on Subsonic Air Intakes with Serpentine Ducts for UAV Configurations
21 Design of UAV for photogrammetric mission in Antarctic area
Commission room 4
?
CEAS 2015: Conference programme Technical sessions
16:30 - 18:00
Main Auditorium
Senate room Federico II"")
van Hasselt room
228
194
147
Introducing ecodesign to ESA - An overview of the activities towards a coherent eco-design approach
An advanced aircraft design framework for aircraft preliminary design and optimization
Feasibility Study for a Tailless Aircraft with Post Stall Maneuvering Capability
Aerodynamic Validation of a Parametric Airfoil Description
Huesing (European Space Agency)
De Marco, Agostino (University of Naples Federico II"")
Krus, Petter (Linköping University)
Melin, Tomas (Linköpings Universitet)
-
Kozakiewicz, A.K., olejnik, A.O. (Military University of Technology)
Staack, Munjulury, R.C., Melin, T (Linköping University)
Gårdhagen, R. (Linköpings Universitet)
Life Cycle Assessment 145 Integrating sustainability in the
Aircraft Design Methodology 2 1 Methodology for the Validation of Loads
Flight Control 2
Flow Control
54 Open Cavity Flow Control Using
75 Aerodynamic modelling of an
3
Commission room 3 Funes-Sebastian, D.E. (AIRBUS Defence and Space), Rein, M. (DLR), Säterskog, M. (SAAB AB, Aeronautics) 133
Commission room 2
23 Methods of flightpath planning for UAV photogrammetry missions with consideration of aircraft dynamic properties Glowacki, Dominik (Warsaw University of Technology) Hajduk ,J. (Air Force Institute of technology), Lis, M., Dziubinski, A., Krysztofiak, G (Institute of Aviation) Remotely Piloted Aircraft Systems 2 69 Decision making for unmanned flight in
Commission room 4
?
PulCheR workshop ?
CEAS 2015: Conference programme Technical sessions Main Auditorium design of space activities: development of ecodesign tools for space projects Chanoine, Augustin (Deloitte)
Le Guern, Y., Witte, F. (Deloitte) 237 Developing a standardised methodology for space-specific Life Cycle Assessment Austin (European Space Agency) -
Senate room in Rational Turning Analysis
van Hasselt room Simultaneous Jets at the Separation and Impingement Edges
Chorro Martínez, José Manuel (Airbus Defence and Space)
Al Haddabi, Naser (University of Glasgow)
Parra Adan, S., Martínez Pérez, A.D., Gómez Viñas, J.E., Juan Antonio, J.A. (Airbus Group), Tito Carrillo, J. (Sertec) 49 Collaborative aircraft design using an integrated and distributed multidisciplinary product development process Moerland, Erwin (German Aerospace Center DLR) Daoud, F. (Airbus Defense & Space), Nagel B. (German Aerospace Center
Commission room 3 active flow control system for flapless flight control in the preliminary design stages Stadlberger, Korbinian (Technische Universität München)
Commission room 2 icing conditions
Armanini, Sophie (Delft University of Technology)
-
Hornung, M. (Technische Universität München)
Lucas, A. (AOS Group), Whidborne, JF (Cranfield University)
163
117
71
A semi-empirical methodology for balanced field length estimation of jetengined aircraft in early design phases
Assessment of Pulsed-Jet Actuators to Increase Maximum Lift of a Mid-Range Aircraft
RPAS Systems Overview and Configuration Tool
Vos, Roelof (Delft University of Technology) Bertels, F. G. A., Van Dijk, R. E. C. (Delft University of Technology TUD)
Gruber, Mario (Fach Hochschule Joanneum) Flühr, H.F., Kainrath, K.K., Jelinek-Nigitz, H.J. (FH Joanneum), Fortner, R.F.,
Angeiras, Tulio (Embraer) Orra, T.H. (Embraer), Paula, A.A., Mattos, B.S. (Instituto 4
Commission room 4
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room DLR)
van Hasselt room Tecnológico de Aeronáutica - ITA)
Commission room 3
241
150 Development of a certification module tailored to Aircraft Multi Disciplinary Optimization
186
201
Commission room 2 Ritzinger, M.R. (AAI – Austrian Aeronautics Industries Group) 81
Online Parameter Estimation for Envelope Expansion
Future wing Hybrid Laminar Flow Control suction system design and analysis
Progress in Inverted Joined Wing Scaled Demnostrator Programme Galinski, Cezary (Institute of Aviation) Hajduk, J.H. (Air Force Institute of Technology), Rodzewicz, M.R. (Warsaw University of Technology)
?
? (European Space Agency)
Schmollgruber, Peter (ONERA)
Nusrath, Khadeeja (NAL)
Alderman, James (Airbus Group Innovations)
-
Bartoli, N. (Onera), Gourinat, Y. (ISAE)
Basappa, K., Jatinder, Singh (NAL)
-
Commission room 4
?
Tuesday 8 September 2015 08:00 - 09:00 09:00 - 10:30
Keynote 'Challenges to the European Airlines' Athar Husain Khan (CEO Association of European Airlines AEA) & Peter Hartman (Vice-chairman Board of AirFrance/KLM) Aircraft Design: Guidance & Impact of Rockets Space CEAS Trustee Air Transport 1 Configurations Navigation on Atmosphere Sustainability Board meeting 45 91 174 154 (internal meeting) A High-Precision Impact of rocket Extending the AMAN Position Turn-Table launches on horizon by visualizing Jumbo City Flyer as the Reference for chemical and aerosol prediction Angular composition of the uncertainty Accelerometer atmosphere 5
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room Calibration Experiment
Tielrooij, Maarten (Delft University of Technology)
Gangoli Rao, Arvind (Delft University of Technology)
Jatiningrum, Dyah (Delft University of Technology)
Borst, C. (Delft University of Technology), Nieuwenhuisen, D. (NLR), Paassen, M.M., Mulder, M. (Delft University of Technology)
Eitelberg, G (DNWGerman-Dutch Wind Tunnels)
Lu, P., De Visser, C.C., van Paassen, M.M., Mulder, M. (Delft University of Technology)
-
170
188
-
Aerodynamic Design and Shape Optimization of Transonic JoinedWing Civil Transport
Methods and facilities to be used to evaluate the aircraft flight and navigation equipment in flight tests
-
Zhang, Mengmeng (Royal Institute of Technology)
-
Rizzi, R. A. (Royal
Yakushev, Vyacheslav (Central Aerohydrodynamic Institute TsAGI) Harin, E.G., Kopylov, 6
Commission room 3
Sofiev, Mikhail (Finnish Meteoeological Institute) Wood, C (Finnish Meteorological Institute), Vira, J., Kouznetsov, R. , Tarvainen, V. (Finnish Meteorological Institute), Grenard, P., Ordonneau, G (ONERA) 213 Dispersion and chemical composition of Athena II rocket plumes: Model simulations versus in-situ aircraft measurements Bekki, Slimane (OVSQ) Cariolle, D.C.
Commission room 2
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room Institute of Technology), Nangia, R. K. N. (University of Bristol)
van Hasselt room I.A. (Flight Research Institute)
67
171
Understanding Fleet Impacts of Formation Flight
Characteristics of locked and freewheeling ducted fan based on wind tunnel tests and CFD analyses
199 Implementation of GNSS-based RNAVflight procedures – quantification of potential benefits for business aviation users
Boling, Bryan () Liu, Y. (RWTH Aachen University) 11:00 - 12:30
Rodzewicz, Miroslaw (Warsaw University of Technology) Bogdanski, Krzysztof. (Warsaw University of Technology)
Air Transport 2
Aircraft Design: Fundamentals
98
34
Autonomous flying: a must for the future
Analysis Of Aircraft Configurations Including Propagated Uncertainties
Commission room 3 (CERFACS), Guenot, L.G. (Herakles), Murray, N.M. (ESA/ESTEC), Toumi, R.T. (Imperial College) 233
Murray (European Space Agency)
Schubert, M. (Intraplan Consult GmbH)
-
52 Use of simulator motion feedback for different classes of vehicle dynamics in manual control tasks 7
Commission room 4
Space Design 1
CEAS Trustee Board meeting
6
(internal meeting)
Findings and conclusions from the AtILA project
Böck, Philipp (Intraplan Consult)
Handling Qualities
Commission room 2
Advanced Manufacturing for Space Applications 1 159 Optimisation of spacecraft component topology and functionality through additive
A New SDRE method to Design a Control Law for a Rigidflexible Satellite
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Graaff, Adriaan (AD Cuenta)
Pfeiffer, Till (German Aerospace Center DLR)
Lu, Tao (Delft University of Technology)
-
Moerland, E., Böhnke, D. (German Aerospace Center DLR)
Pool, D.M., Damveld, H.J., van Paassen, M.M., Mulder, M. (Delft University of Technology)
112
58
Economical Assessment of Commercial HighSpeed Transport
Rotorcraft-Pilot Coupling Research in Europe: A Success Story in Collaboration
Margaretic, Paula (Airbus Operations)
Dieterich, Oliver (Airbus Helicopters Germany)
Steelant, J.S. (Johan Steelant)
Pavel, M.D. (Technical University of Delft)
8
Commission room 3 manufacturing Curtis Rouse, Mike (STFC) Scott, A.S. (RAL Space, STFC), Collingwood, CC (STFC), Vick, V.S. (UK Astronomy Technology Centre), Greenway, P.G., Ward, K.W. (RAL Space, STFC) 208 New green polymer composites processed by Additive Manufacturing for “clean space” applications Rinaldi, Marianna (University of Rome Tor Vergata"") Cacciotti, I. (University of Rome Niccolò Cusano""), Pambaguian, L., Ghidini, T. (European Space Agency ESA-
Commission room 2 Gadelha de Souza, Luiz (Brasilia University)
-
56 Time-Efficient and Accurate Performance Prediction and Analysis Method for Planetary Flight Vehicles Design Moreno Lopez, Ana Isabel (UPM, ETSIAE) Jarzabek, A.A., González Hernández, M.A., Perales Perales, J.M. (UPM)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
127 Clusterization of airport cities and cluster dynamics for an air passenger demand network topology forecast based on socioeconomic development scenario
206
134
Statistical Time and Market Predictive Engineering Design (STAMPED) Techniques for Preliminary Aircraft Sizing
A distributed simulation framework for rapid deployment of research demonstrators
Additive Manufacturing for Space applications on European Space Programs
Space Capsule Using Energy of Gravitational Field for Flight Control
Barrett, Ronald (The University of Kansas)
Entz, Ricardo (Airbus Defence and Space)
Bonvoisin (European Space Agency)
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI)
Terekhov, Ivan (German Aerospace Center DLR)
Gollnick, V G (DLR, Air Transportation Systems) 13:30 - 14:30
-
Commission room 3 ESTEC), Canala, V., Massarelli, V. (Mecaer Aviation Group), Nanni, F. (University of Rome Tor Vergata"") 222
Commission room 2
131
Tressoldi Moreira, Fernandes de Oliveira, Schubert, Brasoveanu, D. Dickmanns, Stenzel, (Raytheon) Scherer, Schwening (Airbus Defence and Space GmbH) Keynote 'Challenges in realizing a Single European Sky' 9
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
14:30 - 16:00
Air Traffic Control 1 29
Developing Generic Flight Schedules for Airport Clusters
Bießlich, Peter (Hamburg University of Technology)
Gollnick, V.G. (Hamburg University of Technology)
Senate van Hasselt Commission Commission room room room 3 room 2 Florian Guillermet (Director SESAR JU) & Paul Riemens (CEO LVNL) Advanced Manufacturing for Measurement Aircraft Design: Wind Tunnel Wall Space Techniques Wing & Tail Interference Applications 2 63 102 224 14 Surface pressure Wind tunnel model measurements at a support and wall Lambda wing at Characterisation of Study of a Simplified interference steady and pitching Material Demisability Methodology for a corrections in DNWangle of attack at for Spacecraft Flexible Wing Design HST- ensuring high vortex dominated Components data quality flow including standards transonic effects Wubben, Frenk Wiggen, Stefan Garcia, Luis Eduardo Merrifield (Fluid (German-Dutch Wind (German Aerospace (Embraer) Gravity Engineering) Tunnels DNW) Center DLR) Klein,C. (DLR/ Institute of Aerodynamics and Flow Technology), Sachs, W. (DLR/ Institute of Antunes, A. P., De Takara, E.K. Aerodynamics and Paula, A. A. (Embraer) Flow Technology), (EMBRAER) Henne, U. (DLR/ Institute of Aerodynamics and Flow Technology), Nuhn, J. 10
Commission room 4
CEAS Trustee Board meeting (internal meeting)
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
van Hasselt room
Commission room 3
100 Integration of Mission Trajectory Management functions into CleanSky Technology Evaluation Process
123
116
225
Design Methodology for Trailing-Edge High-Lift Mechanisms
Investigations of ETW slotted wall interference using the NASA CRM model
Impact of additive manufacturing on spacecraft engine design
Alternative Laminar Flow Techniques
Hyde (European Space Agency)
Seyfang, George (Formerly @ BAE Systems)
-
-
-
220
-
Dynamic Measurements on the NASA CRM Model tested in ETW
Cadot-Burillet, Delphine (Airbus Operations)
Vos, Roelof (Delft University of Technology)
Albert, M.A. (Airbus Operations)
Zaccai, D. (Delft University of Technology TUD)
110 Decision-making inconsistencies in ATC: an empirical investigation into reasons for rejecting decision support automation
191 Integration of a High-fidelity Methodology for Tailplane Design into a Transport Airplane Calculator
Kursakov, Innocentiy (Central Aerohydrodynamic Institute TsAGI) Bosnyakov,S.M., Glazkov, S.A., Gorbushin, .A., Lysenkov, A.V., Matyash, S.V., Semenov, A.V. (Central Aerohydrodynamic Institute) 169 Guidance for scaled model testing on regional jet design
11
Commission room 2 (DLR/Institute of Aeroelasticity) 35
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium Westin, Carl (Delft University of Technology) Borst, C. (Delft Technical University), Hilburn, (Center for Human Performance Research)
16:30 - 18:00
Senate room Mattos, Bento (Instituto Tecnológico de Aeronáutica)
van Hasselt room Portolon da Silva, Tiago (Instituto Tecnológico de Aeronáutica)
Secco, N.R.S., Paula, A.A (Instituto Tecnológico de Aeronáutica)
Agrico de Paula, A.A.P. (Instituto Tecnológico de Aeronáutica)
EU ESWIRP project Turbulent / Laminar Flow Testing 26 Experimental Investigation of Small Scale Homogeneous Isotropic Turbulence in S1MA wind tunnel
Commission room 3
Commission room 2
-
Hensch, Ann-Katrin (European Transonic Windtunnel ETW)
-
Quix, H. (ETW)
Advanced Manufacturing for Space Applications 3
Remotely Piloted Aircraft Systems 3
CEAS Trustee Board meeting
221
109
(internal meeting)
Additive layer manufacturing of monolithic catalyst bed
Visual tracking of ground and air targets
Air Traffic Control 2
Aircraft Systems 1
141 An ecological flowbased decision support tool for future 4D-trajectory management by air traffic control
138 A Methodology to Enable Automatic 3D Routing of Aircraft Electrical Wiring Interconnection Systems
Klomp, Rolf (Delft University of Technology)
Zhu, Zaoxu (Delft University of Technology)
Bourgoin, Mickael (LEGI / CNRS)
Essa (University of Birmingham)
-
La Rocca,G. (), J.L.
Baudet, C.B.,
-
12
Gafurov, Salimzhan (Samara State Aerospace University) Zakharov, K.
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
142 Solution SpaceBased Complexity Metric for ATC Mercado Velasco, Gustavo (Delft University of Technology) Borst, C. (Delft University of Technology) 179
Senate room van Tooren, M. (University of South Carolina) 177
van Hasselt room Mordant, N.M. (LEGI / CNRS)
Commission room 3
113
223
An optional APU for passenger aircraft
Wind Tunnel Test For Breakthrough Laminar Aircraft Demonstrator Europe at DNW-LLF
Additive manufacturing of space propulsion hardware
Scholz, Dieter (Hamburg University of Applied Sciences)
Artois, Koen (German-Dutch Wind Tunnels DNW)
Smith (European Space Agency)
185
Air Traffic Flow Optimisation using Wind Models
A methodological approach for the Product Development Process optimization of aircraft components
Bil, Cees (RMIT University)
Mulder, Bram (Delft University of Technology)
Postma, J., Philipsen, I. (German-Dutch Wind Tunnels DNW) 181 High-Speed PIV Applied to the Wake of the NASA CRM Model in ETW at High Re-Number Stall Conditions for Sub- and Transonic Speeds Konrath, Robert ()
13
242
Commission room 2 (Samara State Aerospace University) 120 Autonomous planning and replanning of a single Unmanned Aerial Vehicle: strategies and simulations Fusaro, Roberta (Politecnico di Torino) Cresto Aleina, S., Viola, N. (Politecnico di Torino) 184
?
Design, implementation and evaluation of a system to support Well Clear
? (European Space Agency)
Theunissen, Erik (Netherlands Defence Academy)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium Assaad, Z., Eberhard, A., Moore, M. (RMIT University) 18:30 - 20:00
Senate room La Rocca, G. (Delft University of Technology), De Jong, H., Van der Elst, S. (KE-works)
Aeroelasticity
Detailed Aircraft Design
96
17
Automatic Generation of Aeroelastic Simulation Models Combined with a Knowledge Based Mass Prediction
Design and analysis of the control and stability of a Blended Wing Body aircraft
Maierl, Reinhold (Airbus Defence and Space)
Merino Martinez, Roberto (Polytechnic University of Madrid UPM)
Petersson, Ö, Daoud, F (Airbus Defence and Space)
-
164 Aeroelastic Concepts in Civil Aircraft Wings
165 Knowledge-based Integrated Aircraft
van Hasselt room
Commission room 3
Commission room 2
-
-
Suarez, B (General Atomics Aeronautical Systems Inc.)
Complex Flows
Clean Sky
50
44
Aerodynamic interaction between ground vortex and propeller investigated by experiments and CFD
Clean Sky Technology Evaluator – Air Transport System assessments
Yang, Yannian ()
Junior, Alf (German Aerospace Center DLR)
Eitelberg, G., Veldhuis, L. (Delft Univwersity of Technology)
-
146 Development of Flow Structures in the
248 People, Planet, Profit: the Making of
Prognostics and Health Management 24 Impacts of a Prognostics and Health Management System on Aircraft Fleet Operating Cost during Conceptual Design Phase by using Parametric Estimation Fioriti, Marco (Politecnico di Torino) Pavan, G. (Alenia Aermacchi), Corpino, S., Fusaro, R. (Politecnico di Torino) 168 Expanding customer services perimeter: 14
Commission room 4
-
CEAS 2015: Conference programme Technical sessions Main Auditorium Design
Senate room Windshield Optimization for Conceptual Design
Mazidi, Abbas (Yazd university)
Munjulury, Raghu Chaitanya (Linköping University)
Fazelzadeh, S.A., Ranjbar, A. (Shiraz university)
Gårdhagen, R., Berry, P, Krus, P (Linköping University)
217 Aerial Delivery dynamic model validation by Flight Test
196 Landing Gear Conceptual Design and Structural Optimization of a Large Blended Wing Body Aircraft
van Hasselt room from strategy to technology and the other way around. The case of Health and Usage Monitoring Systems (HUMS) in the management of missiles stockpiles Nicolay, Alexis (MBDA France) Pavan, G. (Alenia Aermacchi), Chiesa, S., Fusaro, R. (Politecnico di Torino) 175 Potential benefits of Prognostics and Health Management in conceptual aircraft design
Oliver, Mercedes (Airbus Defence and Space)
Cumnuantip, Sunpeth (German Aerospace Center DLR)
Hölzel, Nico (German Aerospace Center DLR)
Pérez, A.P.,
-
Torhorst, S. (Collège 15
Commission room 3 Near-Field Wake Region of the Common Research Model
Commission room 2 the Clean Sky 2 PPP
Zimmermann, DinaMarie (University of Stuttgart)
van Manen, Ron (Clean Sky JU)
Waldmann, A., Lutz, T., Krämer, E. (University of Stuttgart)
-
182
-
The influence of the drag dynamic stall in the vawt starting efficiency
-
Malael, Ion (Romanian Research and Development Institute for Gas Turbines COMOTI) Dragan, V.,
-
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium Rodríguez, A.J. (ALTRAN), Climent, H.C. (Airbus Defence and Space)
Senate room
van Hasselt room des Ingénieurs), Meyer, H., Gollnick, V. (DLR - German Aerospace Center)
Commission room 3 Gherman, B. (Romanian Research & Development Institute for Gas Turbines COMOTI)
Commission room 2
Commission room 4
Wednesday 9 September 2015 08:00 - 09:00
09:00 - 10:30
Keynote 'Challenges to the European Aerospace Research Infrastructure' Eric Dautriat (Executive Director CleanSky), Rolf Henke (Member DLR Executive Board, chairman ACARE WG 5) & Michel Peters (CEO NLR) EU-project INcreasing young women's EU ESWIRP participation in Structural Design Re-entry International project - Wind Aircraft Systems 2 Science Studies 1 assessment collaboration Tunnel Upgrades and in the Aeronautic Industry (IN2SAI) - panel session 10 27 15 99 40 Overall view of the ESWIRP: European Thermal Properties Development of laser European Strategic Wind of C919X EHAs Development of a beam welding Collaboration in tunnels Improved Operating During Break Up Re-Entry concepts for Aeronautics Research Potential – Whole Flight Sensor fuselage panels Research within Program Overview Envelope GARTEUR Kashaev, Nikolai Greger, Ralf (RUAG Consigny, Hervé Fu, Yongling (Helmholtz-Zentrum Boyet, Guy (ONERA) Space) (ONERA) (Beihang University) Geesthacht) Han, X., Qi, X.Y. Riekehr, S., Falck, Murray, N.P. (ESA), Vasseur, O., Delot, (Beihang University), R., Enz, J. Benkeser, C., A.L. (ONERA) Wang, L.J. (COMAC) (Helmholtz-Zentrum Coppoolse, W. 16
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
53
57 Preliminary Design Rules for Electromechanical Actuation Systems – the Effects of Saturation and Compliances
Mach number control improvement in ONERA s1ma large sonic wind tunnel Crozier, Pascal (ONERA)
Chargy, C., Pichon, R. (ONERA)
Fu, Jian (Institut Clément Ader, INSA)
Hazyuk, I., Maré, J.C. (Institut Clément Ader, INSA)
van Hasselt room Geesthacht), Robson, J., Tian, Y. (The University of Manchester, School of Materials), Karanika, A. (Hellenic Aerospace Industry S.A., Research and Product Design) 48 Robust Aircraft Rotation Planning using Stochastic Optimization Kölker, Katrin (German Aerospace Center DLR) Wenzel, S.W. (DLR), Zeile, C.Z. (GeorgAugust-University Göttingen), Westphal, S.W. (Technical University Clausthal), Marco, M.B. (Technical University Clausthal), 17
Commission room 3 (RUAG Space), Prof. Roesgen, T. (ETH), Weihs, H., Dittert, C. (DLR)
Commission room 2
173
114
RADID – Vehicle Design Optimization for Demise and Destructive Re-entry Assessment
Future of Aviation
Weikert, Sven (Astos Solutions GmbH)
Szodruch, Joachim (IFAR)
Fritsche, B. (HTG Hyperschall Technologie Goettingen GmbH), Eggert, J., Kossev, I. (Astos Solutions GmbH), Huertas, I. (ESA / ESTEC)
Shin, Jai (NASA), Nakahashi, K.N. (Japan Aerospace Exploration Agency)
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
118
192 The implications of aerospace requirements on the design-space of a permanent magnet starter/generator
DNW innovations in wind tunnel testing New moving belt system for Large Low speed Facility Hermans, Christophe (German-Dutch Wind Tunnels DNW)
-
11:00 - 12:30
EU ESWIRP project - NASA Common Research Model 103 Validation of FluidStructure Coupled Wing Deformation Simulations for the NASA Common Research Model
van Hasselt room Lütjens, K.L. (DLR) 83 FEM analyses of joined wing aircraft configuration
Commission room 3
Commission room 2
243 A potential framework for the safe and permanent passivation of a LEO battery bus power system
247
Future Sky
Mieloszyk, Jacek (Warsaw University of Technology)
Alcindor (SSTL)
Eijssen, Paul (EREA)
MSc Kalinowski, M. (Warsaw University of Technology)
-
-
Multi-Disciplinary Design
Structural Design 2
De-orbiting Technologies
Technologies for Space 1
43 Cooling channel flow characterization using Particle Image Velocimetry and Laser Induced Fluorescence
3 Ground Test Vibrations as nonconservative mean of compliance for vibration airworthiness
162
229
Analysis of Electric Propulsion for DeOrbiting of SunSynchronous Satellites
TRP - GSTP - ARTES - etc… - ???
Brink, Emile (Aeronamic) Gerber, M. (Aeronamic), Geest, M. (Technische Universiteit Delft), Zeilstra, D. (Aeronamic), Boer, A. (NLR)
18
Commission room 4
IN2SAI panel session
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Keye, Stefan (German Aerospace Center DLR)
Rochlitz, Henrik (TU Braunschweig)
Rudnik, R. (DLR) 158 Using wing modal deformation for improvement of CFD results of ESWIRP project Vrchota, Petr (Aeronautical Research and Test Institute) Prachar, A.P. (Aeronautical Research and Test Institute) 161 Analysis of the NASA Common Research Model European Transonic Wind Tunnel Test Data
Scholz,P.S. (TU Braunschweig) 95 Multidisciplinary design optimization of flight control system parameters in consideration of aeroelasticity Nussbächer, Daniel (Airbus Defence and Space) Hanel, M., Daoud, F. (Airbus Defence and Space), Hornung, M. (Technical University of Munich) 115 Integrated multidisciplinary engineering solutions at Fokker Aerostructures
van Hasselt room requirements of A/C mechanical systems design Palomares, Angel (Airbus Defence and Space)
Commission room 3
Commission room 2
Fromm, Christian (German Aerospace Center DLR)
Becker, Udo (European Space Agency)
-
Herbertz, A. (DLR)
-
107
226
230
Modeling method of strength analysis for thin-walled structure
Architectural Design and Testing of a Deorbiting Subsystem
TEC-TTP - ???
Wang, Zhijin (Nanjing University of Aeronautics and Astronautics)
Tiedemann (HPS)
Diaz, Lluc (European Space Agency)
Kang, Longhui, Kretov, A.S., Huang, Sheng
-
Aude de Clercq, Aude
198 Citric acid aerospace stainless steel passivation: a green approach
19
227 Development and Testing of Deployable Membrane for DeOrbiting Systems
231 EC - ???
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium and NASA Test Data Rivers, Melissa (NASA Langley Research Center) Quest, J.Q. (European Transonic Windtunnel), Rudnik, RR (German Aerospace Center DLR)
13:30 - 14:30 14:30 - 16:00
Greenhouse Gas Emissions 1 76 Aviation – Environmental Threats Simplified methodology of NOx and CO emissions estimation
Senate room
van Hasselt room
Commission room 3
Commission room 2
Bragaglia, Mario (University of Rome Hahn (HTS) ??? (EC) Tor Vergata"") Rinaldi,M. (University of Rome Tor Vergata""), Cacciotti, Laan, A.H., I. (University of Hootsmans, L.M. Rome Niccolò (Fokker Cusano""), Mori, S., Aerostructures) Nanni, F., Montesperelli, G. (University of Rome Tor Vergata"") Keynote 'Challenges to the European Aerospace Education' Hester Bijl (Dean TU-Delft Aerospace Faculty) & Tbd () Space Debris Maintenance Future Education Mitigation Repair and and Training Space design 2 technologies at Overhaul Needs system level 33 25 207 7 Contributing to Orbital Sustainability 21st Century Skills Accelerating MRO with an Independent for the Aerospace procedures for Thermally Induced Decommissioning Industry Workforce composite materials Vibration Analysis of Device for Satellite and Their using innovative Flexible Solar Wing and Launcher Space Translation to the detection techniques Implementing Space Classroom Debris Mitigation Measures
Commission room 4
Berg, Tobie (Fokker Aerostructures)
20
4th IN2SAI partner meeting (internal meeting)
CEAS 2015: Conference programme Technical sessions Main Auditorium
80 Comparison of the Potential Environmental Impact Improvements of Future Aircraft Concepts Using Life Cycle Assessment
Senate room Schoemaker, Christiaan (Hogeschool van Amsterdam) Pelt, M.M.J.M., Boer, R.J., Borst, M.S. (Hogeschool van Amsterdam), Groves, R.M. (Delft University of Technology) 93 Experimental evaluation of vibration-based damage identification methods on a composite aircraft structure
Johanning, (Hamburg University of Applied Sciences)
Hwang, Jason (National Aerospace Laboratory NLR)
Cervone, Angelo (Delft University of Technology)
Duhamel (Airbus Defence and Space)
Deshmukh, Meenakshi (German Aerospace Center DLR)
Loendersloot, R., Tinga, T. (University of Twente)
Zandbergen, B.T.C., Noomen, R., Gill, E.K.A., Mooij, E., Kamp, A. (Delft University of Technology)
-
Wolff, R., Schaus, V. (German Aerospace Center (DLR))
Glowacki, Pawel (Institute of Aviation)
Czyz, S., Kawalec, M.
Scholz, D. (Hamburg University of Applied Sciences)
van Hasselt room
Commission room 3
Lappas, Ilias (South Wales University)
Antonetti, Stefano (D-ORBIT)
Kourousis, K.I.K. (University of Limerick)
Ferrario, L.F., Rossettini, LR (DORBIT SRL)
Yang, J. (RMIT University), Wang, Z. J. (NUAA)
128
238
20
Giving Space to Space: Bachelor Education in Space Engineering at Delft University of Technology
Airbus Defence and Space Global Approach to Space Debris Mitigation
Interactive 3D Visualization to Support Concurrent Engineering in the Early Space Mission Design Phase
21
Commission room 2 Kong, Xianghong (Nanjing University of Aeronautics and Astronautics)
Commission room 4
CEAS 2015: Conference programme Technical sessions
16:30 - 18:00
Main Auditorium 183 Rotorcraft Noise and Emissions Reduction Process for CleanSky – The Measurement of Success
Senate room 197 Damage identification in composite panels using acoustoultrasonic waves
D'Ippolito, Roberto (Noesis Solutions)
Loendersloot, Richard (University of Twente)
van Hasselt room 172 A Multidisciplinary and Practical view in Aeronautical Engineering Education De Paula, Adson (Technological Institute of Aeronautics ITA)
Smith, C.S. (Agusta Westland), Pachidis, VP (Cranfield University), Stevens, J.S. (National Aerospace Laboratory NLR), Thevenot, L.T. (Airbus Helicopters)
-
Germano, J.S.E., Morales, M.A., Carvalho, F.C., Passador, F.E (Technological Institute of Aeronautics ITA)
Greenhouse Gas Emissions 2
Manufacturing Technology
Aircraft Design Methodology 3
189
111 Simulation Driven Design and Additive Manufacturing. A new design process to unleash potential of Additive Manufacturing
8
Environmental prospects in aviation: a study from the Air & Space Academy FC
An automated CFD analysis workflow in overall aircraft design applications
22
Commission room 3 239
Commission room 2 144
CleanSat
Model Based Design for Automated System Architecture Generation
Soares (European Space Agency)
Staack, Ingo (Linköping University)
-
Krus, P. (Linköping University)
Active Debris Removal system studies 124 Envisat removal by robotic and net capture means. Results of the Airbus DS led e.Deorbit Phase A ESA study
Personal Air Transport 16 Next Generation Fixed-Wing Personal Aerial Vehicle
Commission room 4
IN2SAI final conference session
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room freedom
van Hasselt room
Commission room 3
Commission room 2
Cervantes Herrera, Alejandro (Altair Engineering)
GU, Xiangyu (German Aerospace Center DLR)
Estable, Stéphane (Airbus Defence and Space)
Panayotov, Hristian (Technical University - Sofia, Plovdiv Branch)
-
-
Ciampa, P.D., Nagel, B. (German Aerospace Center DLR)
190
167
46
CO2 Emissions From Flights Within And Between Industrialised States
Design and optimisation methodologies for Additive Layer Manufacturing (ALM) considering uncertainties
Conceptual Design Method for the Wing Weight Estimation of Strut Braced Wing Aircraft
ANDROID Small Active Debris Removal Mission
Rigaudias, JeanBaptiste (Air and Space Academy, retired Air France VP Environment)
Azevedo, José (CEIIA)
Chiozzotto, Gabriel (German Aerospace Center DLR)
Escorial Olmos, Diego (GMV Aerospace and Defence SAU)
-
Alves, N.A. (Instituto Politécnico de Leiria
-
Peters, T.V.P. (GMV Aerospace and
Joselzon, Alain (Air and Space Academy)
23
Bischof, B.B., Oswald, M.O., Soppa, U.S., Axthelm, R.A., Mistritta, M.S., Voigt, P.V. (Airbus Defence & Space) 148
Zafirov, D.I. (Technical University - Sofia, Plovdiv Branch) 130 European Personal Aero-Transportation. Using of the DoubleFlutter Flight Principle for Manufacturing of Personal Flying-Cars by European Aircraft and Car Manufacturers Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI) Brasoveanu, D. (Orbital ATK), Voicu,
Commission room 4
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room IPL), Santos, RS (Instituto Superior Técnico IST), Mortágua, JPM (CEIIA)
van Hasselt room
205
195 Micro Laser Sintering capabilities opens the door for long endurance flights supported by light weight and precise micro parts
215
Commission room 3 Defence SAU), Naudet, J. (QinetiQ Space), Chitu, C.C. (GMV Romania), Sewerin, J.K., Barcinski, T. (Centrum Badari Kosmicznych Polskiej Akademii Nauk) 153
Morphed vertical tailplane assessment for certification requirements
ESA’s e.deorbit mission and its roadmap to Active Debris Removal
Thinking out of the Box: unwrapping the ‘Flying Car’. How to combine personal transport in the air and on the road
Biojet fuel
Commission room 2 R., Deaconu, M., Cican, G., Zavodnic, F. (COMOTI)
Commission room 4
203
Kuentzmann, Paul (Air and Space Academy, ONERA)
Winderlich, Matthias (3D MicroPrint)
Castillo-Acero, Miguel Angel (Aernnova)
Biesbroek, Robin (European Space Agency)
Jorna, Peter (PAL-V)
-
Goebner, J.G.. Blau, M.B.L., Weber, D.W.E., Starke, T.S.T., Schneck, M.S.C., Lehnhardt, A.L.E. (3D MicroPrint GmbH)
Cuerno-Rejado, C., Gómez-Tierno, M.A. (Escuela Técnica Superior de Ingenieros Aeronáuticos, UPM)
-
Dingemanse, R.D. (PAL-V)
Thursday 10 September 2015 08:00 - 09:00
Keynote 'Challenges to the European Air Power in Asymetric Conflicts' CDRE Peter Round (Director Capability EDA) & Lt-Gen Sander Schnitger (Commander Royal Netherlands Air Force) 24
CEAS 2015: Conference programme Technical sessions Main Auditorium
09:00 - 10:30
van Hasselt room
Commission room 3
The Future of Air Combat Systems in Europe
Technologies for Active Debris Removal 1
11
119
Advanced composite for space applications: Design and Structural Analysis of CFRP Electronics Housing
Flight-physical aspects and methods of future military aircraft designs
Voicu, Raluca (Romanian Research and Development Institute for Gas Turbines COMOTI)
Hitzel, Stephan Maria (Airbus Defence and Space)
31 Autonomous robotic system for active debris removal: requirements, stateof-the-art and concept architecture of the rendezvous and capture (RVC) control architecture/system Jankovic, Marko (German Research Center for Artifial Intelligence (DFKI GmbH) / University of Bremen)
Composite Structures 1
Senate room Active FlowLoads & Noise control on next generation wing (AFLoNext) workshop
-
-
36 Crash Concept for Composite Transport
-
135 COBRA contactless de-tumbling
-
25
Commission room 2
Commission room 4
Technologies for Space 2
European Workshop on Aircraft Design Education (EWADE)
234
193
European Space Technology Harmonisation
The Importance Of Non-Linearities In Aircraft Preliminary Design
Williams, Edmund (European Space Agency)
Nicolosi, Fabrizio (University of Naples Federico II"")
-
De marco, A., Della Vecchia, P (University of Naples Federico II"")
235 ???
?
CEAS 2015: Conference programme Technical sessions
11:00 - 12:30
Main Auditorium Aircraft Using Tensile and Compressive Absorption Mechanisms Schatrow, Paul (German Aerospace Center DLR) Waimer, M. (German Aerospace Center DLR) 55 Composite laminates simulation using an enhanced peridynamics lamina formulation Zaccariotto, Mirco (University of Padua) Dipasquale, D.D., Sarego, S.G., Galvanetto, G.U. (University of Padova)
Senate room
Composite Structures 2
AFLoNext workshop
Arnt Offringa (Fokker Technology) 77 Multiscale Virtual
van Hasselt room
Commission room 3
Commission room 2
-
Peters, Thomas (GMV Aerospace and Defence SAU)
P. Lionet, P. (Eurospace + SME4Space)
-
Escorial Olmos, D., Pellacani, A. (GMV)
Bracquené, H.
-
155 How many satellites need de-orbit technologies? Future scenarios for passive de-orbit devices Palla, Chiara (Cranfield University)
-
-
-
-
Propeller Interactional Aerodynamics Leo Veldhuis (TU Delft) 5 Wind tunnel high 26
Commission room 4
236 ???
?
??? (FR or DE (big) + CH or NL (small))
Jennifer Kingston (Cranfield University)
-
Technologies for Active Debris Removal 2
Green Propulsion 1
132 Special Equipment
68 Experimental
EWADE
?
CEAS 2015: Conference programme Technical sessions Main Auditorium Testing – The roadmap to the efficient design of composites for Damage Tolerance
Lopes, Claudio (IMDEA Materials Institute) Falcó, O., Naya, F. (IMDEA Materials Institute), Tijs, B. (Fokker Aerostructures B.V.), González, C., Llorca, J. (IMDEA Materials Institute) 78 GARTEUR Structures & Materials Action Group 32 – An European Research Project On Damage Growth In Aerospace Composite
Senate room
van Hasselt room speed powered tests of the ERICA tilt rotor model in S1MA - NICETRIP Project
Commission room 3 Which Uses Concentrated Solar Light for Earth Protection Against Asteroids-Advanced Design and Technology
Commission room 2 investigations based on a demonstrator unit to analyze the combustion process of a nitrous oxide/ethene premixed green bipropellant
Lebrun, Frederic (ONERA)
Sandu, Constantin (Romanian Research and Development Institute for Gas Turbines COMOTI)
Werling, Lukas (German Aerospace Center DLR)
-
Brasoveanu, D. (Orbital ATK), Anghel, O., Voicu, R., Zavodnic, R. (COMOTI)
Perakis, N., Hochheimer, B.I.J., Gernoth, A., Schlechtriem, S. (German Aerospace Center DLR)
152 APIAN-INF: a Lowspeed Aerodynamic and Aeroacoustic Investigation of Pylon – Pusher Propeller Interaction Effects
27
143 Clamping Mechanism – Designing a Tentacles Based Capture Mechanism for Active Debris Removal
139 Pulcher-pulsed chemical rocket with green high performance propellants: second year project overview
Commission room 4
?
CEAS 2015: Conference programme Technical sessions Main Auditorium Structures Riccio, Aniello (Second University of Naples)
Senate room
-
82 CompoWorld: an innovative approach to innovation and economic development Veldman, Bouke (Stichting CompoWorld) 13:30 - 15:00
Aeroacoustics 19 Fly-over noise sources localization and engine settings
AFLoNext workshop
van Hasselt room Sinnige, Tomas (Delft University of Technology) Lynch,K.P., Malgoezar, A.M.N., Scheper, K.Y.W., Ragni, D., Snellen, M., Eitelberg, G. (Delft University of Technology) 156 CFD Analysis of a blowing pylon system for the APIAN propeller in pusher configuration Sitges de la Sotilla, Oscar (German Aerospace Center DLR) Márquez Gutiérrez, C.M. (Rolls-Royce Deutschland) Propulsion Integration 1 51 Mathematical Modeling Of Aircraft Gas Turbine Engine 28
Commission room 3
Commission room 2
Meyer, Jan-Christian (OHB System)
Pasini, Angelo (Alta)
Scheper, M.S. (OHB System AG), Vazquez, J.V. (SENER Ingeneria y Sistemas), Le Letty, R.L.L. (ESA)
Torre, L., Pace, G., Pasini, A. (Alta S.p.A.)
240
-
Simulating and testing throw-nets for space debris removal
-
Wormnes (European Space Agency)
-
-
-
Space Design 3 94 Combined Launch System: a new concept to reduce
Green Propulsion 2 101 Green MicroResistojet Research at Delft University of
Commission room 4
?
EWADE
?
CEAS 2015: Conference programme Technical sessions Main Auditorium analysis using a low cost, high resolution acoustic camera Merino Martinez, Roberto (Delft University of Technology) Snellen, M.S., Merino-Martinez, R., Simons, D.G. (Delft University of Technology TUD) 88
On thermo-acoustic acoustic-vorticalentropy waves and flow stability
Campos, Luis (Instituto Superior Técnico)
Senate room
van Hasselt room In On-Board Control System Blyumin, Kirill (Samara State Aerospace University) Gimadiev,G. (Samara state aerospace university (national research university)), Nizhegorodtsev, V. (Samara state aerospace university (national research university)) 90 Increasing Air-Fuel Ratio of Consumption of Distributed Turboelectric Propulsion for Blended Wing Body Aircraft using Recuperator Seenivasan, Dinesh Babu (Technical University of Madrid) 29
Commission room 3 the launch costs for Micro (Cube) Satellites and Debris hunting probes
Commission room 2 Technology: the New Frontiers of Cubesat Propulsion
Ahmed, Hamed (Cairo University)
Cervone, Angelo (Delft University of Technology)
-
Wang, C. (Beihang University), Cordeiro Guerrieri, D., Zandbergen, B.T.C., van Zeijl, H.W. (Delft University of Technology)
157
-
All moving tail plate interaction on an aerodynamic characteristic of the rocket plane in tailless configuration
-
Kwiek, Agnieszka (Warsaw University of Technology)
-
Commission room 4
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
Senate room
Marta, A.C.M. (Instituto Superior Técnico)
-
122
149 The constructal principle and character law, hyperbolic, of natural design, a new paradigm of aerospace systems Stanciu, Virgil (University Politehnica of Bucharest)
A new computational framework for UAV quadrotor noise prediction
Vieira, Ana (CEIIA)
Pavel,C. (University Politehnica of Bucharest)
-
15:30 - 17:00
Community Noise 38 Clean Sky Technology Evaluator – Noise assessment and experience at airport
van Hasselt room
AFLoNext workshop
Propulsion Integration 2 180 Computation of Thermodynamic Cycle for Novel Detonation Aircraft Engine 30
Commission room 3 Figat, M.F., Senenko, K.S. (Warsaw University of Technology) 218
Commission room 2 232
Analysis of the flow in a propulsion nozzle subjected to a fluid injection
ESA green propulsion progress
Chellou, Nassir (Hassiba Benbouali University of Chlef)
Valencia-Bel (European Space Agency)
Benarous, A, Guendez, M. (Hassiba Benbouali University of Chlef)
IXV 244 IXV-1
Commission room 4
?
-
Green Propulsion 3 136 Propulsive performance of a c3h4/h2o2 rocket prototype for future green bipropellant
EWADE
?
CEAS 2015: Conference programme Technical sessions Main Auditorium level Eenige, Michel (National Aerospace Laboratory NLR)
-
39 Auralization of novel aircraft configurations Arntzen, Michael (National Aerospace Laboratory NLR) Bertsch, L. (DLR), Simons, D.G. (Delft Technical University) 202 Noise predictions of a hypersonic air transport vehicle concept during the landing and take-off cycle
Senate room
van Hasselt room Cuciumita, Cleopatra (Romanian Research and Development Institute for Gas Turbines COMOTI) Porumbel,I. (COMOTI Romanian Research and Development Institute for Gas Turbines) 216 A Mathematical Analysis of a Hydrogen Motor Glider Drive Papucki, Jacek (Warsaw University of Technology)
Commission room 3
Commission room 2 thrusters
? (European Space Agency)
Pasini, Angelo (Alta)
-
Pace, G., Torre, L. (Alta S.p.A.)
245 IXV-2 ? (European Space Agency)
212 Design of Valve Segment for a Hybrid Rocket Engine Rana, Usman (European Space Agency)
-
-
Hink, R.(ERIG)
-
246
219
-
IXV-3
Green Solid Propellants for Launchers
31
Commission room 4
?
?
CEAS 2015: Conference programme Technical sessions Main Auditorium
17:00 - 18:00
Senate room
van Hasselt room
Commission room 3
Wijntjes, Rik (National Aerospace Laboratory NLR)
-
? (European Space Agency)
Tuinstra, M (NLR), Taguchi, H (Japan Aerospace Exploration Agency)
-
Closing event
32
Commission room 2 Wingborg, Niklas (Swedish Defence Research Agency, FOI) -
Commission room 4
CEAS 2015: Conference programme Technical sessions Still to be scheduled: 211 Aircraft Preliminary Design: the Windowless Concept
209 Investigation of Low Fidelity codes on the determination of Stability Derivatives and Characteristics of unconventional BoxWing Aircraft
Bagassi, Sara (University of Bologna)
Clark Reis, José Roberto (Embraer)
Lucchi, F., Persiani, F. (University of Bologna)
Bustamante Coura, J.C. (Embraer S.A.)
33
