CCTV Camera Systems for Harsh & Industrial Environments
www.topsideoffshore.com
Highlights • Offshore & marine environment ruggedized equipment • Flexible system • Simple control • Easy expandable • Less cabling • Remote access • Network video management
Oil & Gas industries • Exploration • Production • Petrochemical
Application • • • • • •
High quality PTZ Camera 18x optical zoom (12x digital zoom) Eex & safe area
Drilling rigs FPSO’s Production platforms Petrochemical plants Wind energy farms etc.
Rolloos CAMPRO IP CCTV system For monitoring and save guarding of processes and installations in hazardous and non-hazardous areas, the CAMPRO IP CCTV system of Top Side Offshore Technology is the right solution. With our EEx and non-EEx cameras, you have a continuous view of the whole area incl. those places which are hard to reach or are not directly visible. The Rolloos CAMPRO system is an IP network CCTV system and consists of high quality fixed and zoom cameras, pan & tilt units, monitor(s) and video management equipment (potentially with network video recorder). It is very easy to operate the system and can be extended to an advanced warning system. Because of the IP structure, the system is simple to extend with extra cameras and monitors. Cabling is much less compared to traditional systems, because of the use of group cabinets. Each group cabinet consists of a number of cameras. These group cabinets are connected to the main cabinet via a fibre optic cable, the so-called backbone.
Next to the advantage of less cabling a fibre optic cable is insensitive to EMCradiation, which guarantees a trouble free video transfer independent of the location. The Rolloos CAMPRO IP CCTV system can be a basic setup with a few cameras and monitor stations up to a custom build design with 70 or more camera stations.
Example: single line diagram CAMPRO IP CCTV system CONNECTED TO GROUP CABINET 1
LEGEND
CONNECTED TO GROUP CABINET 2 DP BACK-UP CONTROL
ECR
CAMERA FIXED NON EX
DRILLER & ASSISTENT DRILLER
21,3 "
21,3"
2X
CONNECTED TO GROUP CABINET 3 CEMENTER
MAIN DRILLING OFFICE 19"
19"
CLIENT OFFICE
21,3"
21,3"
CAMERA FIXED EX
OVERSIDE & LIFEBOAT EMBARKATION
WELL TEST AREA WASH
CAMERA PTZ NON EX
DERRICK
1X
2X
DRILLING ENGINEERS OFFICE
TENSIONER AREA WASH
WASH
OIM OFFICE
WASH
6X
4X
SHAKER ROOM
DRLL FLOOR
21,3"
21,3" 21,3"
CAMERA PTZ EX
WASH WASH SYSTEM FOR PTZ EX
PUMP ROOM
ENGINE ROOMS
2X
6X
WASH 1X
WASH 2X
MOONPOOL AREA
5X
DRILL PIPE AREA WASH
BRIDGE & DP CONTROL
OFFICES
2X
17"
WASH 1X
21,3" 21,3" 21,3"
DRAWWORKS DRUM
21,3"
MOONPOOL AREA
WASH
ONSHORE LOCATION
1X
PUMP ROOM
HELIDECK
2X
1X
WASH
1X
21,3" 21,3" 21,3"
OVERSIDE & LIFEBOAT EMBARKATION
21,3"
RISER STORAGE AREA
WASH 2X
WASH 1X
CENTRAL ROOM
CENTRAL CABINET
FIBER OPTIC
GROUP CABINET 1
FIBER OPTIC
FIBER OPTIC (BACK BONE)
GROUP CABINET 2
FIBER OPTIC
GROUP CABINET 3
CCTV Camera Systems in action Crane Camera System
Offshore Drilling & Production The new generation drilling rigs are very complex machines with a lot of equipment, personnel and activities on board. To guarantee a safe and efficient operation of these units, a reliable and sophisticated CCTV system is required. The largest shipbuilder in the world has selected the CAMPRO IP CCTV system to be used on their drill ships. The CCTV package for these ships contains up to 50 PTZ cameras and more than 20 monitor stations to secure that each critical location is monitored. Each user
can have its dedicated cameras and different functionalities. A 4-16 TB Network Video Recorder is used to capture all information and store it for at least 48 hours. Remote (onshore) monitoring is one of the many options available with this system.
Onshore Drilling & Production Following the offshore industry, the onshore drilling and production processes demand the same level of
Crane operation on board of a drilling rig, production platform or any other offshore unit is a high risk job. People and equipment are constantly moving around and the crane operator has to scan his loading area continuously for dangerous situations. Dangerous situations will be reduced to a minimum and efficiency will increase to a maximum when using our crane boom tip camera system. With this system, the crane operator is in control of the situation at all time and can be proactive instead of reactive.
Extra cameras can be used to observe the winches or the crane access area. The right solution for your application is already here. Our robust and reliable equipment has proven itself worldwide over the past 15 years, you will always get what you need.
Offshore Wind Energy safety and efficiency. The land drilling rigs used all over the world are growing in size and complexity. Therefore a well-functioning CCTV system is of the utmost importance. Top Side Offshore Technology offers a wide range of CCTV systems for this purpose: a basic 4 camera CCTV system up to the same advanced technology as used on the offshore rigs. Remote monitoring of land drilling operations is becoming a standard for many oil companies.
The offshore wind energy market is a high-tech market that requires advanced solutions. Wind farms with 80 turbines or more are no longer an exception.
Offshore substation platforms collect the generated power and distribute it onshore via special subsea cables. Monitoring these platforms is in most cases done remotely on onshore locations. The CAMPRO IP CCTV system is in use on substation platforms and proves an ideal solution. Also in areas with high EMC requirements.
Short product overview
Pan Tilt Zoom Camera
Fixed Camera
Dome Camera
Thermal Camera
High quality PTZ camera, designed for harsh offshore environments. Available as explosion proof and nonexplosion proof version. Extensively tested and approved for shocks and vibrations.
Explosion proof and non-explosion proof fixed camera. The smallest explosion proof camera in the world. Fixed lens with different angles.
Dome camera for in-/outdoor offshore use. Available as explosion proof and non-explosion proof version.
Thermal image camera, designed for harsh offshore environments. Extensively tested and approved for shocks and vibrations. Also available in explosion proof version and with pan & tilt unit.
Resolution: Zoom capacity:
Resolution: 795 (H) x 596 (V) Lens angles: 12° to 131° Operating temp.: -40°C to +85°C (EEx: -40°C to +75°C) Ingress protection: IP69k Heating: auto-activated at 15°C Housing: SS316L or Aluminum with Nituff offshore coating ATEX approval: ATEX II 2 G EEx m II T4 Option: with bright LED lights
Resolution: Zoom capacity:
Resolution: 324 (H) x 256 (V) Digital zoom : 2x, 4x Operating temp.: -40°C to +80°C (EEx: -40°C to +75°C) Ingress protection: IP69k Heating: auto-activated at 15°C, puls width modulated Housing: SS316L or Aluminum with Nituff offshore coating ATEX approval: ATEX II 2 G EEx pm II T5 Incl.: presets
752 (H) x 582 (V) 216x (18x optical, 12x digital) Operating temp.: -40°C to +85°C (EEx: -40°C to +75°C) Ingress protection: IP69k Heating: auto-activated at 15°C Housing: SS316L or Aluminum with Nituff offshore coating ATEX approval: ATEX II 2 G EEx pm II T5 Weight: 6,8 kg (Al) or 15 kg (316L) Incl.: presets
768 (H) x 576 (V) 18x optical, 26x as option Operating temp.: -20°C to +60°C Ingress protection: IP68 ATEX approval: Ex d IIC T6 Panning angle: 360° (continuous) Tilting angle: -90° to + 90° (digital flip) Housing: Stainless steel Weight: 8 kg Output options: Coax, Fiber Optic, IP
Software Our video surveillance software offers a single, innovative and open IP video platform for video management, video analytics, system integration and alarm management. The Windows based software runs on dedicated servers or PC’s. View and control of the cameras goes over TCP/IP on a local computer or network. You can select and control all cameras and see them in any combination on your monitor, simultaneously or in sequence. Rights can be given to different users to avoid cameras monitoring the wrong view. If you want to monitor and control the cameras via internet, just log in to the CCTV system. All cameras can be recorded with the Network Video Recorder (NVR). This NVR offers you the possibility of viewing, recording and replay all cameras simultaneously. For smaller CCTV systems with only a few cameras, e.g. our crane camera systems, different analogue solutions are available.
Production Each ROLLOOS CCTV system will be assembled at our production facility in Capelle aan den IJssel (NL), all according ISO certified procedures. This standardization guarantees a constant high quality for all systems, manufactured at our facility. Over the last few years, the sales of the ROLLOOS CAMPRO IP system have increased enormously. More and more customers are choosing ROLLOOS CAMPRO IP or are switching from analogue to digital. To keep up with the increasing sales, our production capacity and production space have more than doubled over the last year. As a result the short delivery time has remained unchanged, although the
CCTV systems have become more advanced and the number of cameras and monitors per project are increasing. Part of this success is the standardization of production and the large number of parts that are in stock at our warehouse. Therefore, assembly of your ROLLOOS CAMPRO IP CCTV
system can start quickly after order entry. Next to the ROLLOOS CAMPRO IP systems, the production department is also assembling crane camera systems, derrick camera systems with 2-4 cameras and larger analogue camera systems. All at our production facility in Capelle aan den IJssel (NL). Our office in Houston, TX, Top Side Offshore Technology USA, and our sister company, SIDUS Solutions in San Diego, CA, can assist in assembling the CCTV systems for the American market.
Subsea CCTV Solutions For monitoring and inspection of subsea applications, Top Side Offshore Technology offers a complete range of subsea cameras, pan & tilt units, lights and lasers. The manufacture is SIDUS Solutions, headquartered in San Diego, California. SIDUS Solutions is part of the Rolloos Holding, as is Top Side Offshore Technology. With a core technical capability to provide systems for deep water inspection applications, the products include high output LED lights, high resolution and low light camera stations, rugged and powerful robotic
positioning systems and a wide array of monitors, controllers and high capacity recording devices. Ranging from 0 to 10.000 meter/33,000 feet below sea level. In addition to these core components, we build complete integrated systems and packages such as BOP inspection packages, guide wire systems, anchor bolster systems and deep-tow sleds. A solution for every subsea application!
Why Top Side Offshore Technology? Top Side Offshore Technology is an organisation specialized in development, sales, installation and maintenance of CCTV, Safe Load, Weighing and Crane Load Systems for all kinds of applications both onshore and offshore. All our business activities are directed towards assisting and supporting our clients in increasing the safety, efficiency and control of their business operations. With Top Side Offshore Technology you are in control of your safety and efficiency.
You get more than a CCTV system Survey
Documentation
Testing (FAT)
After sales support
For every project, you are supported by our specialists to create the best solution. A site survey might be necessary to discuss all the options with the people involved.
General arrangement drawings, detailed drawings, electrical wiring diagrams, IOM manuals and hazardous area certificates are some of the documents which accompany each delivered system.
After completion, each system is extensively tested for its functionality (FAT). This FAT can be witnessed by the customer or its representative.
Our after sales support is responsible for customer service, sales of spare parts, product maintenance and customer training. They are there for you.
Engineering and in house design The final choice will be engineered in detail. Production drawings, bill of materials and connection diagrams will be made and presented for (pre) installation purposes.
Production Each CCTV system will be assembled at our production facility in Capelle a/d IJssel (NL).
Commissioning When the system is installed by the customer or a third party, our service engineers take care of the electrical connections and the commissioning. This guarantees a proper functioning.
Radarstraat 12, 2901 AV Capelle aan den IJssel The Netherlands Telephone: +31 (0)10 – 451 56 55 Fax: +31 (0)10 – 458 58 28 E-mail:
[email protected] Internet: www.topsideoffshore.com
Partner of SIDUS Solutions www.sidus-solutions.com
