®
Value +
CATALOG For New Products 2010
NEW
®
Value +
12 + 12 CARE PROGRAM Register at www.asimeto.com.hk
12 Gold Care Program With your purchase of any ASIMETO Precision Tool you will automatically receive a 12 month warranty, from the date of purchase, against manufacturing defects.
12 + 12 Platinum Care Program To supplement the industry standard 12 month warranty an additional 12 month warranty is available by registering your individual purchase on line at www.asimeto.com.hk within 30 days from the date of purchase.
Warranty Claims To claim your warranty simply return the defective tool to the place of purchase with a copy of the invoice. The defective tool will either be repaired or replaced at the sole discretion of ASIMETO Precision Tools.
Let ASIMETO Precision Tools become your measurement partner of choice!
2
INDEX
Index
®
Micrometers . . . . . . . . . . . . . . . . . . . . . . . 5 Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . 11 Depth & Height Gauges . . . . . . . . . . . . . . 19 Indicators . . . . . . . . . . . . . . . . . . . . . . . . 21 Other Gauges . . . . . . . . . . . . . . . . . . . . . 29 Testers . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Sensor System . . . . . . . . . . . . . . . . . . . . 47
ASIMETO (GUANGZHOU) INC. is a precision tool subsidiary of Sowa Company, which was founded in 1960 by Mr. Gerhard Sowa Sr. in Kitchener, Ontario, Canada. The company focuses on three product lines, SOWA cutting tools, GS CNC tooling and ASIMETO measuring tools. Quality and Service is our commitment to our worldwide customers. ASIMETO (GUANGZHOU) INC. is fully equipped by German and Canadian latest technology in metrology. We offer 100% calibrated tools and provide unprecedented value added content (VALUE+) with the belief that providing reliable products and added value to our customers. ASIMETO is committed to new technology and improvements. More value to the customers, our employees stand by this principle. ®
Calibration Lab
3
MICROMETERS
®
Micrometers Speedy Micrometer (Mechanical) . . . . . . . . . . . . . . . . . . . 6 Spline Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Limit Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hot Sheet Metal Micrometer . . . . . . . . . . . . . . . . . . . . . . . 8 Gear Tooth Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Sheet Metal micrometer . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Micrometers
®
Value +
Quick-Setting Micrometers, 1mm Rev. Microme-
Features: • 1mm thread pitch for quick setting. • The measurement can be read directly from the thimbledue to the 100 step graduation. • Carbide measuring face, painted frame. • With Ratchet thimble for constant force. • Resolution: 0.01mm.
Metric Range 0-25mm 25-50mm 50-75mm 75-100mm
TECHNICAL DATA 6
Accuracy ±0.004mm ±0.004mm ±0.005mm ±0.005mm
Code No. 102-61-0 102-62-0 102-63-0 102-64-0
Micrometers
®
Value +
Spline Micrometers • For measuring the splined shafts, slots and keyways. • Inch/Metric conversion for digital models. • Ratchet stop for exact repetitive readings.
• Carbide tipped measuring faces. • 15 degree and 30 degree measuring points are available.
Digital Models • Resolution: .00005" / 0.001mm.
Inch Range 0-1" 1-2" 2-3" 3-4" 0-1" 1-2" 2-3" 3-4"
Metric
Accuracy ±.0001" ±.0002" ±.0002" ±.0002" ±.0001" ±.0002" ±.0002" ±.0002"
Range 0-25mm 25-50mm 50-75mm 75-100mm 0-25mm 25-50mm 50-75mm 75-100mm
Accuracy ±0.004mm ±0.004mm ±0.005mm ±0.005mm ±0.004mm ±0.004mm ±0.005mm ±0.005mm
Anvils A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm)
Inch
Metric
Code No. 118-01-1 118-02-1 118-03-1 118-04-1 118-01-3 118-02-3 118-03-3 118-04-3
Code No. 118-01-0 118-02-0 118-03-0 118-04-0 118-01-2 118-02-2 118-03-2 118-04-2
Mechanical Models Inch Range 0-1" 1-2" 2-3" 3-4" 0-1" 1-2" 2-3" 3-4"
Metric
Graduation: .0001" Accuracy ±.0001" ±.0002" ±.0002" ±.0002" ±.0001" ±.0002" ±.0002" ±.0002"
Anvils A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm)
Code No. 118-61-1 118-62-1 118-63-1 118-64-1 118-61-3 118-62-3 118-63-3 118-64-3
Range 0-25mm 25-50mm 50-75mm 75-100mm 0-25mm 25-50mm 50-75mm 75-100mm
Graduation: 0.01mm Accuracy ±0.004mm ±0.004mm ±0.005mm ±0.005mm ±0.004mm ±0.004mm ±0.005mm ±0.005mm
Anvils A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) A (Φ2*5mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm) B (Φ3*10mm)
Code No. 118-61-0 118-62-0 118-63-0 118-64-0 118-61-2 118-62-2 118-63-2 118-64-2
TECHNICAL DATA 7
Microme-
Features:
Micrometers
®
Value +
Limit Micrometers Microme-
Features: • Can be used as a GO/NG gauge by setting the upper and lower limits. • Carbide measuring face, painted frame. • With Ratchet thimble for constant force. • Resolution: 0.002mm for metric, .0001” for inch.
Inch Range 0-1" 1-2"
Metric
Graduation: .0001" Accuracy ±.0001" ±.0002"
Standard w/o with
Code No. 133-31-1 133-32-1
Range 0-25mm 25-50mm
Graduation: 0.002mm Accuracy ±0.003mm ±0.003mm
Standard w/o with
Hot Sheet Micrometers Features: • Designed for measuring thickness of hot rolling sheet metal. • Carbide measuring face, painted frame.
Inch Range 0-.6" .6-1.2" 1.2-1.8" 1.8-2.4" 2.4-3.0" 3.0-3.6" 3.6-4.2"
8
Metric
Graduation: .002" Accuracy ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002"
Code No. 133-41-1 133-42-1 133-43-1 133-44-1 133-45-1 133-46-1 133-47-1
Range 0-15mm 15-30mm 30-45mm 45-60mm 60-75mm 75-90mm 90-105mm
Graduation: 0.05 mm Accuracy ±0.05mm ±0.05mm ±0.05mm ±0.05mm ±0.05mm ±0.05mm ±0.05mm
Code No. 133-41-0 133-42-0 133-43-0 133-44-0 133-45-0 133-46-0 133-47-0
Code No. 133-31-0 133-32-0
Micrometers
®
Value +
Gear Tooth Micrometers MicromeMicrome-
Features: • Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuing faces. • Interchangeable ball anvil-spindle tips for various gear modules (0.5-5.25) are optional. • Inch/Metric conversion for digital models. • Ratchet stop for exact repetitive readings.
Digital Models • Resolution: .00005" / 0.001mm.
Inch Range 0-1" 1-2" 2-3" 3-4" 4-5" 5-6" 6-7"
Metric
Accuracy ±.0001" ±.0002" ±.0002" ±.0002" ±.0002" ±.0002" ±.0002"
Range 0-25mm 25-50mm 50-75mm 75-100mm 100-125mm 125-150mm 150-175mm
Metric
Inch Accuracy ±0.004mm ±0.004mm ±0.005mm ±0.005mm ±0.006mm ±0.006mm ±0.007mm
Code No. 118-31-1 118-32-1 118-33-1 118-34-1 118-35-1 118-36-1 118-37-1
Code No. 118-31-0 118-32-0 118-33-0 118-34-0 118-35-0 118-36-0 118-37-0
Inch Mechanical Models Graduation: .001" Range 0-1" 1-2" 2-3" 3-4" 4-5" 5-6" 6-7"
Accuracy ±.0001" ±.0002" ±.0002" ±.0002" ±.0002" ±.0002" ±.0002"
Code No. 118-71-1 118-72-1 118-73-1 118-74-1 118-75-1 118-76-1 118-77-1
Metric Range 0-25mm 25-50mm 50-75mm 75-100mm 100-125mm 125-150mm 150-175mm
Graduation: 0.01mm Accuracy ±0.004mm ±0.004mm ±0.005mm ±0.005mm ±0.006mm ±0.006mm ±0.007mm
Code No. 118-71-0 118-72-0 118-73-0 118-74-0 118-75-0 118-76-0 118-77-0
TECHNICAL DATA 9
Micrometers
®
Value +
Sheet Metal Micrometers Microme-
Features: • A dial attached to the sleeve is for making easy and quick reading of sheet metal thickness. • Carbide measuring face, painted frame. • With Ratchet thimble for constant force. • Resolution: 0.01mm for metric, .001” for inch.
Inch Range 0-.6" 0-1" 0-.6" 0-1"
TECHNICAL DATA 10
Metric
Graduation: .001" Accuracy ±.0001" ±.0002" ±.0001" ±.0002"
Measuring Face Flat Flat Spherical Spherical
Code No. 150-51-1 150-52-1 150-51-3 150-52-3
Range 0-25mm 25-50mm 0-25mm 25-50mm
Graduation: 0.01mm Accuracy ±0.004mm ±0.004mm ±0.004mm ±0.004mm
Measuring Face Flat Flat Spherical Spherical
Code No. 150-51-0 150-52-0 150-51-2 150-52-2
Calipers
Value + Absolute Digital Calipers . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Solar Digital Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Digital Carbon Fiber Calipers . . . . . . . . . . . . . . . . . . . . . . 11 Digital Snap Calipers (Vertical Type). . . . . . . . . . . . . . . . . 12 Digital Snap Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Mini Type 3-purpose Digital Calipers. . . . . . . . . . . . . . . . . 13
11 11
CALIPERS
®
Calipers
®
Value +
Absolute Digital Caliper Features:
Calipers
• Whenever turned on, the LCD screen displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology as well as no more care for overspeed errors. • The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for increments. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point). • Inch/Metric conversion. • Thumb wheel included. • SR44 1.5V battery. • Supplied in fitted plastic case.
307-56-0
Inch Range 0-6" 0-8" 0-12"
Resolution .0005" .0005" .0005"
TECHNICAL DATA 12
Metric Accuracy ±.001" ±.0015" ±.0015"
Range 0-150mm 0-200mm 0-300mm
Resolution 0.01mm 0.01mm 0.01mm
Accuracy ±0.02mm ±0.03mm ±0.03mm
Code No. 307-56-0 307-58-0 307-62-0
Calipers
®
Value +
Solar Digital Calipers Features: • Hard-coated solar panel for increased durability. • Thumb roller included. • Supplied in fitted plastic case.
306-56-0
Inch Range 0-6" 0-8" 0-12"
Resolution .0005" .0005" .0005"
Metric Accuracy ±.001" ±.0015" ±.0015"
Range 0-150mm 0-200mm 0-300mm
Resolution 0.01mm 0.01mm 0.01mm
Accuracy ±0.02mm ±0.03mm ±0.03mm
Code No. 306-56-0 306-58-0 306-62-0
Calipers
Carbon Fiber Digital Calipers Features: • Light weight digital calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. • High durable and easy to handle. • Inch/Metric conversion. • Supplied in fitted plastic case.
Inch Range 0-6"
Resolution .0005"
306-56-0
Metric Accuracy ±.001"
Range 0-150mm
Resolution 0.01mm
Accuracy ±0.08mm
Code No. 305-56-0
TECHNICAL DATA 13
Calipers
®
Value +
Digital Snap Gauges Features: • For measuring the thickness of paper, film, wire, sheet metal, jewelry, leather and similar materials. • Inch/Metric conversion. • SR44 1.5V battery.
Calipers
325-36-0
307-56-0
Inch Range Resolution 0-1.2" .0005" Horizotal Type 0-.5" .0005" 0-1" .0005"
TECHNICAL DATA 14
307-56-0
Metric Accuracy ±.0015"
Range 0-30mm
Resolution 0.01mm
Accuracy ±0.03mm
Code No. 325-36-0
±.0015" ±.0015"
0-12mm 0-25mm
0.01mm 0.01mm
±0.03mm ±0.04mm
325-30-0 325-32-0
Calipers
®®
Value Value ++
Pocket Digital Thickness Gauges Features: 325-50-0
• For measuring the thickness of paper, film, wire, sheet metal, jewelry, leather and similar materials. Handy, easy to use. • Inch/Metric conversion. • SR44 1.5V battery.
Inch Range 0-.6" 0-1"
Resolution .0005" .0005"
Metric Accuracy ±.0015" ±.0015"
Range 0-15mm 0-25mm
Resolution 0.01mm 0.01mm
Accuracy ±0.03mm ±0.04mm
Code No. 325-50-0 325-52-0
Mini-type 3-purpose Digital Calipers Calipers
Features: • For measuring the dimension of small workpiece. • Inch/Metric conversion. • SR44 1.5V battery.
306-56-0
Inch Range 0-.6" 0-1"
Resolution .0005" .0005"
Metric Accuracy ±.0015" ±.0015"
Range 0-15mm 0-25mm
Resolution 0.01mm 0.01mm
Accuracy ±0.03mm ±0.03mm
Code No. 305-40-0 305-42-0
TECHNICAL DATA 15
®
Calipers
Value +
16
Calipers
Depth & Height Gauges
DEPTH AND HEIGHT GAUGES
®
Value + Single Beam Digital Height Gauges with Hand Wheel . . 18 Double Beam Digital Height Gauges. . . . . . . . . . . . . . . . 19 2-D Multifunctional Height Gauges . . . . . . . . . . . . . . . . . 20 Bore Gauge Zero Checker . . . . . . . . . . . . . . . . . . . . . . . 20
17 17
Gauges
®
Value +
Single Beam Digital Height Gauges with Hand Wheel Features: • Large LCD display provides the easier read-out. • With large smooth slider feed wheel. • Metric/inch conversion at any position. • Zero setting on any position. • Carbide tipped scriber provided. • Manual power on/off. • Resolution: Inch .0005", Metric 0.01mm.
Inch Range 0-12" 0-18" 0-24"
Metric Accuracy ±.0015" ±.0015" ±.0020"
Range 0-300mm 0-450mm 0-600mm
Accuracy ±0.04mm ±0.04mm ±0.05mm
Code No. 626-12-0 626-18-0 626-24-0
Gauges
TECHNICAL DATA
Depth/Height
626-12-0
18
Gauges
®
Value +
Double Beam Digital Height Gauges Features: • Micro-adjustable wheel. • Drive train for position precision. • Zero setting at any position. • Manual power On/Off. • Inch/Metric system interchange at any position. • Carbide tipped scriber. • Large LCD display model provides easier reading.
Inch
Metric
Range
Accuracy
Range
Accuracy
Code No.
0-12"
±.0015"
0-300mm
±0.04mm
627-12-0
0-18"
±.0015"
0-450mm
±0.04mm
627-18-0
0-24"
±.0020"
0-600mm
±0.05mm
627-24-0
627-18-0
Large LCD Display Model 0-12"
±.0015"
0-300mm
±0.04mm
627-62-0
627-62-0
Depth/Height
Gauges
TECHNICAL DATA 19
Gauges
®
Value +
2D Multi-Functional Height Gauges Features: • Built-in temperature compensation suitable for workshop environment measurement. • Measurement force adjustable. • Built-in air floating facility making movement easy. • Built-in chargeable battery set making portable measurement available. • Applicable for measuring of height, thickness, width of trough, interior and exterior aperture diameter, row pitch, apex, radius and angle. • Can be quickly moved manually to realize quick measurement. • Measurement speed adjustable. • Inch/Metric Conversion.
Model # Code No. Measuring Range Max. Measuring Height Resolution Max. Permissible Variation Reproductive precision Max. velocity for manual Max. velocity for power-driven Measurement force Power supply Time of unceasing use Data output Operating temperature Total height Weight
350 II 628-14-2 350mm 635mm
730mm 17kg
600 II 628-24-2 600mm 885mm 0.0005mm 3.0µm + L/200 ≦2µm 1000mm/s 150mm/s 0.5~1.8N AC 110V or 220V >4H USB Interface +10~+40ºC 980mm 19.5kg
1000 II 628-40-2 1000mm 1285mm
628-24-0
1380mm 23.5kg
Bore Gauge Zero Checker Features:
Gauges
Depth/Height
• The Bore Gauge Zero Checker allows easy zero adjustment of dial bore gauges with ranges of 18mm (.7”) through 400mm (16”) using gauge blocks. • High accuracy and stable performance.
Applicable Ranges 18mm - 400mm / .7” - 16”
20
Code No. 483-00-2
Value +
INDICATORS
®
Indicators Dial Indicator, with Error-free Reading . . . . . . . . . . . . . . 22 Dial Comparator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Back Plunger Type Dial Indicators . . . . . . . . . . . . . . . . . 23 Digital Test Indictors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Test Indicator Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Big Range Dial Test Indicators - Metric Items . . . . . . . . 25 Magnetic Based with Flexible Armr . . . . . . . . . . . . . . . . . 26 Permanent Magnetic Stand. . . . . . . . . . . . . . . . . . . . . . . 26 Digital Caliper Gauges, Inside/Outside . . . . . . . . . . . . . . 27
21
Indicators
®
Value +
Dial Indicators - One revolution for Error-free Reading Features: • A pair of limit hands are provided for quick and easy tolerance judgment. • Provided with an improved resistance to shop floor contaminants such as water and dust. • AGD2 series, dial face dia. Ø2.20"/Ø57mm. • With 8mm stem diameter. • With Flat back.
Metric Range 0.8mm
Graduation 0.01mm
Dial Reading 40-0-40
Overall Accuracy ±0.009mm
Code No. 422-01-0
422-01-0
Back Plunger Type Dial Indicators Features: • Back plunger type dial indicators are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial indicators are difficult to see. • Easy to read dial face. • With counter pointer.
Inch
Indicators
Range .1" .2"
Metric Range 1mm 3mm 5mm
Stem diameter Ø3/8" Graduation .001" .001"
Dial Dia. 1.6” 1.6”
Dial Reading 0-100 0-100
Accuracy ±.001" ±.001"
Code No. 422-11-1 402-12-1
Dial Dia. 58mm 58mm 58mm
Dial Reading 0-100 0-100 0-100
Overall Accuracy ±0.015mm ±0.015mm ±0.02mm
Code No. 422-11-2 402-12-2 402-13-2
402-26-5
Stem diameter Ø8mm Graduation 0.01mm 0.01mm 0.01mm
TECHNICAL DATA 22
Range / Rev. .1" .1"
Range / Rev. 1mm 1mm 1mm
Dial Indicators - One revolution for Error-free Reading
Range
A
B
C
D
-0.4 - 0.4mm
43mm
21.5mm
8.2mm
Ø57mm
Indicators
®
Value +
Dial Comparator Features: • High accuracy. • Jewled and shock proof. • Provide with water and dust resistant feature. • With 8mm stem diameter. • Easy to read dial face. • With releasing cable for more convenient spindle lifting.
Metric Range Graduation ±0.05mm 0.001mm
Dial Reading 50-0-50
Overall Accuracy ±0.0012mm
Code No. 422-21-0
422-21-0
Digital Test Indicator Features: • Large and clear LCD display . • Digital analog display is optional. • Inch/Metric conversion. • Zero-setting of display at any position. • Max-Min memory. • Hold of current measuring value. • USB data output
505-01-0
Inch Resolution .0005" .0005"
TECHNICAL DATA
Dial Comparator
Metric Accuracy ±.001" ±.001"
Range ±0.5mm ±0.5mm
Resolution 0.01mm 0.01mm
Accuracy ±0.03mm ±0.03mm
Anolog Display Yes No
Indicators
Range ±.02" ±.02"
505-01-2
Code No. 505-01-0 505-01-2
Digital Test Indicator
23
Indicators
®
Value +
Extended Range Dial Test Indicator Sets Features for SET #1: • Double the range of most of indictors. • Jeweled movement and easy to read dial. • Set furnished in fitted case.
Specification for SET #1: • Range: 0 – 0.060". • Two dovetail stems and 3 contact points included: Stems: 3⁄8" & 5⁄32", Points: .040 (hardened steel), .080, .120" (tungsten carbide) x 5⁄8" long. • Set Includes: @Indicator @Height Gage Bar (1⁄4" x 1⁄2") w/Swivel Clamp w/5⁄32", 7⁄32", 1⁄4" holes. @Axial Support w/3⁄8" Stem and Dovetail. @Reduction Sleeve 3⁄8" to 5⁄32". @Two dovetail Stems, 3⁄8" & 5⁄32". @Three Contact Points, .040" (hardened steel), .080", .120" (Tungsten Carbide) x 5⁄8" long.
422-01-0
Inch Range .060” .060” .060”
Graduation .0005” .0005” .001”
Dial DIA. 1.5” 1.0” 1.0”
Overall Accuracy ±0.0012” ±0.0012” ±0.0012”
SET Code No. 504-81-1 504-81-3 504-81-1
Indiviual Test Indicator Code No. 504-56-1 503-56-1 503-06-1
Features for SET #2:
Indicators
• Double the range of most of indictors. • Jeweled movement and easy to read dial. • Supplied with Xtra-Mag magnetic base • Set furnished in fitted case.
Specification for SET #2: • Range: 0 – 0.060", Graduation: 0.0005”. • Dial reading 0-15-0, dial dia.: 1-5/16”. • 5⁄32" Stem, dovetail on front and back. • • Set Includes: @Indicator 504-56-1. @Xtra-Mag magnetic base with 2 universal ball sockets. @Microfine adjustment screw. @3-9/16” extension arm @Two dovetail Stems, 3⁄8" & 5⁄32". @Three Contact Points, .040" (hardened steel), .080", .120" (Tungsten Carbide) x 5⁄8" long. @Wrench for replacing contact points.
422-01-0
Inch Range .060”
24
Graduation .0005”
Dial DIA. 1.5”
Overall Accuracy ±0.0012”
SET Code No. 504-82-1
Indiviual Test Indicator Code No. 504-56-1
Indicators
®
Value +
Big Measuring Range Test Indicators - Metric Items Features: • Precise repetitive readings. • Ball bearing and jewelled movement. • Easy to read titled dial.
• Magnetic resistant. • Two way action, no reversing level. • Dovetail and adjustable stem adaption. • Carbide contact point swivel 210 deg.
503-06-1
Range 1.6mm 1.6mm 0.4mm 0.4mm
503-56-1
Graduation 0.01mm 0.01mm 0.002mm 0.002mm
Dial Reading 0-40-0 0-40-0 0-100-0 0-100-0
Accuracy ±0.02mm ±0.02mm ±0.006mm ±0.006mm
Horizontal Model:
B
91mm
64
C D 30mm DIA. 38mm DIA. 30mm 38mm 36mm
Note Horizontal Vertical Horizontal Vertical
30mm DIA. Code No. 503-56-0 503-56-2 503-16-0 -
38mm DIA. Code No. 504-56-0 503-56-2 504-16-0 504-16-2
Vertical Model:
E
F
19.7mm 12.3mm
A
B
C D 30mm DIA. 38mm DIA. 66mm 57.5mm 30mm 38mm 12mm
Indicators
TECHNICAL DATA
A
503-16-1
E
F
G
8.5mm 20mm12.3mm
25
Indicators
®
Value +
Magnetic Bases with Flexible Arm Features: • For Indicators with 3/8"/8mm stems and or Lug backs with 1/4"/6mm hole dia. • On/Off switch. • 132 lbf / 60kg magnetic pull. • Dovetail groove included.
Inch
Applicable holding stem dia. Ø.3/8".
Description With flexible arm, total height 360mm, 60x50x55mm base
Metric
Code No. 601-11-1
Applicable holding stem dia Ø8mm.
Description With flexible arm, total height 360mm, 60x50x55mm base
Code No. 601-11-0
Permanent Magnetic Base Features: • With permanent magnetic base, no On/Off switch. • 17kg magnetic pull. • Dovetail groove included.
Metric
Applicable holding stem dia Ø8mm.
TECHNICAL DATA
Indicators
Description Total height 105mm, Ø25x30mm base
26
Code No. 601-11-0
Indicators
®
Value +
Digital Caliper Gauges Features: • Versatile ID/OD gauges for holes diameter, groove thickness, tube thickness, and hard to reach dimentions.
• With Anolog display. • Resolution: .0005” for inch, 0.01mm for metric.
146-01-0
146-03-1
Inside Guages
Outside Guages
Metric Range
Arm Length
Tipped Length
A Type Code No.
B Type Code No.
A Type Code No.
B Type Code No.
0-10mm 10-20mm 20-30mm 30-40mm 40-50mm
40mm 40mm 40mm 40mm 40mm
8mm 8mm 8mm 8mm 8mm
400-11-0 400-12-0 400-13-0 400-14-0 400-15-0
400-11-2 400-12-2 400-13-2 400-14-2 400-15-2
404-11-0 404-12-0 404-13-0 404-14-0 404-15-0
404-11-2 404-12-2 404-13-2 404-14-2 404-15-2
0-20mm 10-30mm 20-40mm 30-50mm 40-60mm
80mm 80mm 80mm 80mm 80mm
25mm 25mm 25mm 25mm 25mm
400-21-0 400-22-0 400-23-0 400-24-0 400-25-0
400-21-2 400-22-2 400-23-2 400-24-2 400-25-2
404-21-0 404-22-0 404-23-0 404-24-0 404-25-0
404-21-2 404-22-2 404-23-2 404-24-2 404-25-2
TECHNICAL DATA
Range Metric Inch 10mm/.4" travel 0-10mm 0-.8" 10-20mm .4-.8" 20-30mm .8-1.2" 30-40mm 1.2-1.6" 40-50mm 1.6-2.0" 20mm/.8" travel 0-20mm 0-.8" 10-30mm .4-1.2" 20-40mm .8-1.6" 30-50mm 1.2-2.0" 40-60mm 1.6-2.4"
Indicators
Inch Range 10mm/.4" travel 0-.4" .4-.8" .8-1.2" 1.2-1.6" 1.6-2.0" 20mm/.8" travel 0-.8" .4-1.2" .8-1.6" 1.2-2.0" 1.6-2.4"
Remarks A(R) B(D)
L
S
H
40mm 40mm 40mm 40mm 40mm
3mm 3mm 3mm 3mm 3mm
8mm 8mm 8mm 8mm 8mm
0.5mm 0.5mm 0.5mm 0.5mm 0.5mm
/ Ø1.5mm Ø1.5mm Ø1.5mm Ø1.5mm
80mm 80mm 80mm 80mm 80mm
6.5mm 6.5mm 6.5mm 6.5mm 6.5mm
25mm 25mm 25mm 25mm 25mm
0.75mm 0.75mm 0.75mm 0.75mm 0.75mm
/ Ø1.5mm Ø1.5mm Ø1.5mm Ø1.5mm
27
®
Indicators
Value +
28
Indicators
Value +
OTHER GAUGES
®
Other Gauges Protractors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Universal Bevel Protractors. . . . . . . . . . . . . . . . . . . . . . . 30 Dial Protractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Digital Protractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Digital Protractors - Level Type . . . . . . . . . . . . . . . . . . . . 32 Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Straight Knife Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Steel Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Granite Inspection Square. . . . . . . . . . . . . . . . . . . . . . . . 33 Angle Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Angle Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Screw Thread Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Center Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Thickness Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Radius Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Flexible Steel Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Spring Dividers and Calipers. . . . . . . . . . . . . . . . . . . . . . 37 Precision Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 High Precision Metric Parallels . . . . . . . . . . . . . . . . . . . . 38 Optical Flat and Parallels . . . . . . . . . . . . . . . . . . . . . . . . 38 Pin Gauges Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
29
Gauges
®
Value +
Protractors Features: • Regular base protractors’ scale plate and indicator blade are made of stainless steel. • 150mm/6” arm, Ø85mm protractor. • Graduation: 1 degree
Description Protractor Graduation: 0-90, 90-180, 180-90, 90-0 degree Semi-circle: 0-180, 180-0 degree
490-01-1
Code No. 490-01-1 490-01-2
490-01-2
Universal Bevel Protractors Features: • High-precision angle gauge for accurate angle measurement of machines, molds, and jigs. • With magnifing glass for easier reading. • Can be attached to height gauges. • Measuring Range: 0-360 degree. • Dial graduation: 1 degree. Vernier graduation: 5 min. • Accuracy: ±5 min. Description With 150mm/6” blades With 200mm/8” blades With 300mm/12” blades
Other Gauges
TECHNICAL DATA 30
Code No. 490-06-1 490-06-2 490-06-3
490-06-1
Gauges
®®
Value Value ++
Dial Protractors Features: • High-precision angle gauge for accurate angle measurement of machines, molds, and jigs. • With dial indicators. With fine adjustment. • Can be attached to height gauges. • Measuring Range: 0-360 degree. Graduation: 5 min. • Accuracy: ±5 min.
Description With one each of 150mm/6”, 200mm/8”, 300mm/12”blades
Code No. 490-10-0
490-10-0
Dial Protractors Features: • Measuring range: 0-360degree. • Range selection: 1 x 360 degree, 2 x 180 degree, 4 x 90 degree. • Dual reading LCD display arc minutes / decimal degrees. • with find adjustment. • Preset function. • Resolution: 30” • Accuracy: ±5 min.
Description With one each of 150mm/6”, 200mm/8”, 300mm/12”blades
490-15-0
Code No. 490-15-0
Other Gauges
TECHNICAL DATA 31
Gauges
®
Value +
Digital Protractors - Level Type Features: • This protractor provides an immediate digital reading of any angle in a full circle with 0-90º-0-90º-0 readings. The machined aluminum frame is rigid and light with a precise platform that allows the sensor and its microprocessor circuit to provide high accuracy throughout the entire 360º range. • Four 90º quadrants for display purposes. • Calibrates in minutes without any special fixtures. • HOLD button for freezing a reading in an unreadable position. • ABS/ZERO button allows 2 measuring modes, Standard and Alternate Reference. • V-grooves on top and bottom for use on curved surfaces. • Angle displayed upright regardless of protractor position. • Supplied in fitted case. Code Number: Measuring Range: Resolution: Operating Temp. Range: Power: 3V, Lithium cell: Size: Weight:
490-10-0
490-15-0 360° (0-90°-0-90°-0) 0.1° 23°F to 122°F / –5° to +50° C 3V, Lithium cell ± 0.1° -level ±10 / ± 0.1° -plumb ±10 / ± 0.2° -max. error in between 160 x 70 x 74mm 390g
Combination Square Set Features: • Blades are fully hardened and tempered. Finished in baked enamel. • Square head has level and scriber point. • Micro-fine blade graduations. • Sets with cast head or with hardened head. • Graduations: - Protractor: 1 degree - Blade: 1mm, 64ths, 32nds, 1⁄2mm Description 4 pcs set 3 pcs set 3 pcs set 2 pcs set
Blade Length 12”/300mm 12”/300mm 6”/150mm 12”/300mm
Code No. 490-20-4 490-20-3 490-20-6 490-20-2
Straight Knife Edges Features: Other Gauges
• Made of stainless steel. • The test edge is approxiemately 0.1mm in thickness, a cross section of which has radius to provide a straight line contact with the work surface. • For ease of inspection, the uper edge is covered with a grip plate. The acute angle is 30 degree. • Straightness according to DIN874/00. Inch Size 3" 4" 5" 6"
32
Metric Size 75mm 100mm 125mm 150mm
Code No. 639-71-0 639-72-0 639-73-0 639-74-0
Inch Size 8" 12" 16" 20"
639-73-0
Metric Size 200mm 300mm 400mm 500mm
Code No. 639-75-0 639-76-0 639-77-0 639-78-0
Gauges
®
Value +
Steel Squares Features: • Made of stainless steel. • All edges are hardeded and and precesion ground. • Squareness according to DIN875.
Regular Type Inch Size Metric Size Squareness General Type Squares 2” x 1.6" 50 x 40mm 0.0060mm 3” x 2" 75 x 50mm 0.0065mm 4” x 2.75" 100 x 70mm 0.0070mm 6” x 4" 150 x 100mm 0.0080mm 8” x 5" 200 x 130mm 0.0090mm 10” x 6.5" 250 x 165mm 0.0100mm 12” x 8" 300 x 200mm 0.0110mm 16” x 10" 400 x 265mm 0.0130mm 20” x 12" 500 x 300mm 0.0150mm Squares with Beam “Engineers Square” 3” x 2" 50 x 40mm 0.0065mm 4” x 2.75" 100 x 70mm 0.0070mm 6” x 4" 150 x 100mm 0.0080mm 8” x 5" 200 x 130mm 0.0090mm 10” x 6.5" 250 x 165mm 0.0100mm 12” x 8" 300 x 200mm 0.0110mm 16” x 10" 400 x 265mm 0.0130mm
Squareness
Code No.
639-21-4 639-22-4 639-23-4 639-24-4 639-25-4 639-26-4 639-27-4 639-28-4 639-29-4
0.0025mm 0.0030mm 0.0030mm 0.0035mm 0.0040mm -
639-21-0 639-22-0 639-23-0 639-24-0 639-25-0 -
639-32-4 639-33-4 639-34-4 639-35-4 639-36-4 639-37-4 639-38-4
DIN876/0 Inch Size Squares with Base 2” x 1.6" 3” x 2" 4” x 2.75" 6” x 4" 8” x 5" 10” x 6.5" 12” x 8" 16” x 10" 20” x 12"
Bevel Type
Code No.
639-23-0
639-24-4
639-55-1
DIN876/1
Metric Size
Code No.
Code No.
50 x 40mm 75 x 50mm 100 x 70mm 150 x 100mm 200 x 130mm 250 x 165mm 300 x 200mm 400 x 265mm 500 x 300mm
639-52-0 639-53-0 639-54-0 639-55-0 639-56-0 639-57-0 639-58-0 639-59-0 639-60-0
639-52-1 639-53-1 639-54-1 639-55-1 639-56-1 639-57-1 639-58-1 639-59-1 639-60-1
639-35-4
Granite Inspection Squares 90° Features:
Length of Size 200 x 150mm 300 x 200mm 400 x 250mm 500 x 300mm 600 x 400mm 800 x 500mm 1000 x 600mm
Thickness 50mm 50mm 50mm 60mm 70mm 80mm 100mm
Squareness 0.002mm 0.002mm 0.003mm 0.004mm 0.005mm 0.006mm 0.008mm
Code No. 639-01-0 639-02-0 639-03-0 639-04-0 639-05-0 639-06-0 639-07-0
Other Gauges
• Made of black granite, hard and ware-resistant. • Both sizes accuracy. • Squareness according to DIN875, Accuracy of surface according to DIN876/00.
639-03-0
33
Gauges
®
Value +
Angle Gauges Features: • Made of stainless steel, satin finishedl. • 18 individual gauges for easy use. • Eight gauging surfaces per gauge. • Precision finished edges for accurate checking. • Each gauge checkes primary, 1/2 primary and complementrary angles except below 500 on primary angle 2. • Quick and accurate inspection of angles and I.D. or O.D. charmfers in or out of the machine. • Positioning of lathe tools for chamfers. • Inspecting angles on ground form tools and cutters. Description Angle gauges set with Vinyle case
No. of Leaves 18
Code No. 605-01-0
Individual Gauges Included Primary Angle 5° D 10° D 15° D 20° D 25° D 30° D 35° D 40° D 45° D
1/2 Primaary Angle 2°30’ 5° D 7°30’ 10° D 12°30’ 15° D 17°30’ 20° D 22°30’
Accuracy ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’
Complementary Angle 175° D 170° D 165° D 160° D 155° D 150° D 145° D 140° D 135° D
Primary Angle 50° D 55° D 60° D 65° D 70° D 75° D 80° D 85° D 90° D
Angle Blocks Features: • Made of hardened steel. Hardness HRC 55. • Accuracy according to DIN / ISO 3650.
10 pcs Set Length x Thickness 3” x 1/4”
Angle 1° - 5° by step of 1° 10° - 30° by step of 5°
Accuracy ±20”
Code No. 605-06-0
Accuracy ±40”
Code No. 605-06-2
Other Gauges
2 pcs Set Size 3x3x4-3/8" 2x3-15/16x4"
Thickness 1/4” 1/4”
Angle 45° x 45° x 90° 30° x 60° x 90°
7 pcs Set Grade DIN/1
34
Individual Blocks Included 15°10’, 30°20’, 45°30’ 50°00’, 75°50’, 90°00’
Code No. 605-06-3
1/2 Primaary Angle 25° D 27°30’ 30° D 32°30’ 35° D 37°30’ 40° D 42°30’ 45° D
Accuracy ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’ ±5’
Complementary Angle 130° D 125° D 120° D 115° D 110° D 105° D 100° D 95° D 90° D
Gauges
®
Value +
Screw Thread Gauges Features: • Thread pitch size is stamped on each gauge. • Metric, Unified, and Whitworth screw pitch gauges.
Metric Screw Pitch Guages (60°) Range 0.25 - 2.5mm
No. of Leaves 28
0.35 - 6mm
22
0.4 - 7mm
21
0.4 - 7mm
18
Composition of Leaves 0.25mm - 0.90mm by 0.05mm, 1mm - 2mm by 0.1mm, plus 1.25, 1.75, 2.5mm 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm, and 60° angle gauge 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
Code No. 605-50-0 605-51-0 605-52-0 605-53-0
Unified Screw Pitch Guages (60°) Range 4 - 42 TPI
No. of Leaves 30
4 - 84 TPI
51
Composition of Leaves 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30 thru 84 by 2, TPI
Code No. 605-50-2 605-51-2
Metric and Unified Screw Pitch Guages (60°) No. of Leaves 51
Range 0.4 - 7mm 4 - 42 TPI 0.5 - 6mm 4 - 56 TPI
28
Composition of Leaves Set of 605-52-0 and 605-50-2
Code No. 605-50-8
0.5, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm 4, 6, 7, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32 TPI
605-51-8
Whitworth Screw Pitch Guages (55°) Range 4 - 42 TPI
No. of Leaves 30
4 - 60 TPI
28
Composition of Leaves 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40, 48, 60 TPI
Code No. 605-50-5 605-51-5
Center Gauges Other Gauges
Features: • Hardened with lapped edges and notches. • Meets the requriements of the American National and US 600 Standards. • Scales with 14ths and 20ths graduations provided on one side, 24ths and 32ths on reverse side.
Description Center Gauges
Code No. 605-60-0
35
Gauges
®
Value +
Thickness Gauges Features: • Each leaf is marked with it's thickness. • Each leaf is detachable if necessary. • Metric thickness gauges are available with tapered leaves. Please add "T" at the end of product Code No., like 605-30-0.
Metric
605-30-1
Range 0.05 - 1mm
No. of Leaves 20
0.05 - 1mm
13
0.05 - 1mm
10
Composition of Leaves 0.05mm - 1mm by 0.05mm step 0.05mm - 0.3mm by 0.05mm step. 0.4mm - 1mm by 0.1mm step 0.05mm - 0.2mm by 0.05mm step. 0.3mm - 0.8mm by 0.1mm step
Types of Leaves Straight, 13mm width Straight, 13mm width Straight, 13mm width
Blade Length 150mm
Code No. 605-31-0
100mm 150mm 100mm 150mm
605-33-0 605-33-2 605-34-0 605-34-2
Inch Range .002" - .035"
No. of Leaves 26
.0015" - .025"
26
.0015" - .200"
15
.0015" - .200"
15
Composition of Leaves .002" thru .018" by .001" step. Plus .022", .024", .025", .08", .030", .032", .035" .002" thru .025" by .001" step. Plus .0015", .0025" .0015", .002", .003", .004", .006", .008", .010", 012", .015", .020", .030", .040", .075", .100", .200" .0015", .002", .003", .004", .006", .008", .010", .020", .030", .040", .075", .100", .200"
Types of Leaves Straight, 1/2” width Tapered, 1/4" width Straight, 1/2” width Straight, 1/2” width
605-31-1
Blade Length 3”
Code No. 605-30-1
3”
605-31-1
3”
605-32-1
4.5”
605-33-1
Thickness Gauges Features: • Radius size is stamped on each gauge. • Both convex and concave radius gauges become a pair. • With a locking clamp.
Inch
Other Gauges
Range 1/32" - 17/64" 1/32" - 1/4" 17/64" - 1/2" 9/32" - 33/64" 1/64" - 1/2"
No. of Leaves 18 pairs 15 pairs 16 pairs 16 pairs 25 pairs
Composition of Leaves 1/32" thru 12/64" by 64ths 1/32" thru 1/4" by 64ths 17/64" thru 1/2" by 64ths 9/32" thru 33/64" by 64ths 1/64" thru 17/64" by 64ths, 9/32" thru 1/2" by 32ths
Remark 90° arc. 180° arc. 180° arc. 90° arc. -
Code No. 605-40-1 605-41-1 605-42-1 605-43-1 605-44-1
Composition of Leaves 0.4, 0.8, 1, 1.2, 1.5, 1.6mm, 1.75-3mm by 0.25mm, 3.5-6mm by 0.5mm 0.5 - 13mm by 0.5mm 1-3mm by 0.25mm, 3.5-7mm by 0.5mm 7.5 - 15mm by 0.5mm 15.5 - 20mm by 0.5mm, 21-25mm by 1mm
Remark 90° arc.
Code No. 605-40-0
90° arc. 180° arc. 180° arc. 180° arc.
605-41-0 605-42-0 605-43-0 605-44-0
Metric
36
Range 0.4 - 6mm
No. of Leaves 18 pairs
0.5 - 13mm 1 - 17mm 7.5 - 15mm 15.5 - 25mm
26 pairs 34 pairs 32 pairs 30 pairs
Gauges
®
Value +
Flexible Steel Rules Features: • Made of hardened tool steels.
Inch Range 12" 24” 40” 60” 80”
Metric Resolution 1/16 ths 1/16 ths 1/16 ths 1/16 ths 1/16 ths
Range 300mm 600mm 1000mm 1500mm 2000mm
Resolution 1mm 1mm 1mm 1mm 1mm
Width 25mm 30mm 32mm 38mm 40mm
Thickness 1mm 1.2mm 1.5mm 1.8mm 2.0mm
Code No. 606-01-0 606-02-0 606-03-0 606-04-0 606-05-0
Spring Dividers and Calipers Features:
606-32-2
• Spring dividers - fully hardened and tempered joints, spring, washers and divider points. • Outside Spring Caliper - Contact ends fully rounded to give accurate dimensions. • Inside Spring Caliper - Ends fully rounded to give accurate contact with a workpiece.
Inch Range 6" 8” 10” 12” 16” 20” 24”
Metric Range 150mm 200mm 250mm 300mm 400mm 500mm 600mm
Spring Divider Code No. 606-31-0 606-32-0 606-33-0 606-34-0 606-35-0 606-36-0 606-37-0
Outside Spring Caliper Code No. 606-31-2 606-32-2 606-33-2 606-34-2 606-35-2 606-36-2 606-37-2
606-32-4
Inside Spring Caliper Code No. 606-31-4 606-32-4 606-33-4 606-34-4 606-35-4 606-36-4 606-37-4
606-32-0
Precision Levels Features: • High precision longitudinal and transverse vials make it possible to check or level surface.
Straight Models Sensitiity 0.10mm/m 0.05mm/m 0.02mm/m 0.10mm/m 0.05mm/m 0.02mm/m
Code No. 606-51-0 606-51-5 606-51-2 606-51-0 606-51-5 606-51-2
606-51-0
Other Gauges
Range 200 x 47mm 200 x 47mm 200 x 47mm 300 x 55mm 300 x 55mm 300 x 55mm
606-53-0
Square Models Range 200 x 200 x 40mm 200 x 200 x 40mm 200 x 200 x 40mm
Sensitiity 0.10mm/m 0.05mm/m 0.02mm/m
Code No. 606-53-0 606-53-5 606-53-2
Range 300 x 300 x 46mm 300 x 300 x 46mm 300 x 300 x 46mm
Sensitiity 0.10mm/m 0.05mm/m 0.02mm/m
Code No. 606-53-0 606-53-5 606-53-2
37
Gauges
®
Value +
High Precision Metric Parallels Features:
• Tolerance of Height: ±0.01mm. • Tolerance in pairs IT5.
• Made of hardened steels. Hardness HRC 48.
Packed in Luxury Wooden Case Height of Individual Blocks 14, 16, 18, 20, 22,24, 26, 28, 30, 32, 35, 40mm 14, 16, 18, 20, 22,24, 26, 28, 30, 32, 35, 40, 45, 50mm
Length 120mm
Width 10mm
Number of Pairs 12
Code No. 663-01-0
150mm
10mm
14
663-02-0
Packed in Luxury Wooden Stand Width x Height of Individual Blocks 2x5, 3x6, 4x7, 5x8, 6x9mm, 2x10, 3x11, 4x12, 5x13, 6x14mm, 2x15, 3x16, 4x17, 5x18, 6x19mm, 2x20, 3x21, 4x22, 5x23, 6x24mm 8x11, 10x13, 12x15, 14x17mm, 8x16, 10x18, 12x20, 14x22mm, 8x21, 10x23, 12x25, 14x27mm, 8x26, 10x28, 12x30, 14x32mm, 8x31, 10x33, 12x35, 14x37mm, 8x36, 10x38, 12x40, 14x42mm.
Length
Number of Pairs
Code No.
100mm
12
663-11-0
125mm
14
663-12-0
150mm
14
663-13-0
Optical Flat and Parallels Features: • Designed to inspect flatness and parallels of measuring faces of micrometers.
• Each set consists of 4 thicknesses. • Flatness: 0.1µm. Parallelism: 0.2µm. Diameter: 30mm
Optical Flat Other Gauges
Dimensions Ø45 x 15mm Ø60 x 20mm
Flatness 0.1µm 0.2µm
Code No. 605-51-1 605-51-2
Optical Parallels Micrometer Range 0-25mm 25-50mm 50-75mm 75-100mm
38
Dimensions 15.62, 15.75, 15.87, 16.00mm 40.62, 40.75, 40.87, 41.00mm 65.62, 65.75, 65.87, 66.00mm 90.62, 90.75, 90.87, 91.00mm
Code No. 605-52-1 605-52-2 605-52-3 605-52-4
Gauges
®
Value +
Pin Gauges Set Features: • For quick and accurate measurements. Measure hole sizes, slot widths, calculate distances between holes, use as Go/NoGo gaging, etc. • Hardened drill rod HRC 60-62. • 2”/50mm long.
Inch
Class ZZ guaranteed to 0.0002" tolerance limit
Range 0.011 - 0.060" 0.061 - 0.250" 0.251 - 0.500" 0.501 - 0.625" 0.626 - 0.750" 0.751 - 0.832" 0.833 - 0.916" 0.917 - 1.000"
No. of Individuals 50 pcs 190 pcs 250 pcs 125 pcs 125 pcs 82 pcs 84 pcs 84 pcs
Tolerance +0.0002" -0" +0.0002" -0" +0.0002" -0" +0.0002" -0" +0.0002" -0" +0.0002" -0" +0.0002" -0" +0.0002" -0"
Plus Set Code No. 665-80-1 665-81-1 665-82-1 665-83-1 665-84-1 665-85-1 665-86-1 665-87-1
Tolerance -0.0002" +0" -0.0002" +0" -0.0002" +0" -0.0002" +0" -0.0002" +0" -0.0002" +0" -0.0002" +0" -0.0002" +0"
Step 0.1mm 0.1mm 0.1mm 0.1mm 0.1mm 0.1mm
No. of Individuals 41 pcs 41 pcs 51 pcs 51 pcs 911 pcs 911 pcs
Tolerance ±0.001mm ±0.0025mm ±0.001mm ±0.0025mm ±0.001mm ±0.001mm
Minus Set Code No. 665-81-0 665-81-2 665-82-0 665-82-2 665-80-0 665-80-2
Minus Set Code No. 665-80-3 665-81-3 665-82-3 665-83-3 665-84-3 665-85-3 665-86-3 665-87-3
Metric Range 1.0 - 5.0mm 1.0 - 5.0mm 5.0 - 10.0mm 5.0 - 10.0mm 1.0 - 10.0mm 1.0 - 10.0mm
Other Gauges
39
®
Value +
40
Gauges
Value +
Testers Rougness Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Digital Coating Thickness Gauges . . . . . . . . . . . . . . . . . 43 Shora Scale A Durometer. . . . . . . . . . . . . . . . . . . . . . . . 43 Brinell Hardness Tester . . . . . . . . . . . . . . . . . . . . . . . . . 44 Multifunctional Leeb Hardness Tester . . . . . . . . . . . . . . 45 Standardized Hardness Block . . . . . . . . . . . . . . . . . . . . 45 Penetractors for Hardness Tester . . . . . . . . . . . . . . . . . . 45
41 41
TESTERS
®
Te s t e r s
®
Value +
Surface Roughness Standards Features: • Set of 30 specimens, 7⁄8" x 3⁄8" electro formed, solid nickel. • Ideal for use by draftsman, engineers, machinists, etc. • Each type of surface finish is truly and consistently reproduced. offering arealistic idea of the feel, appearance and texture. of the machined components. • Conforms to S.A.E. and military specifications for visual and tactile inspections. • Complete in Special Wallet.
30 pcs Set
Testers
Qty. 2 pcs 4 pcs 6 pcs 6 pcs 6 pcs 6 pcs
42
Contents Flat Lapping Reaming Grinding Horizontal Milling Vertical Milling Turning
Code No.: 506-01-0 Roughness 0.05; 0.1µm (2; 4 µ”) 0.2; 0.4; 0.8; 1.6µm (8; 16; 32; 63 µ”) 0.05; 0.1; 0.2; 0.4; 0.8; 1.6µm (2; 4; 8; 16; 32; 63 µ”) 0.4; 0.8; 1.6; 3.2; 6.3; 12.5µm (16; 32; 63; 125; 250; 500 µ”) 0.4; 0.8; 1.6; 3.2; 6.3; 12.5µm (16; 32; 63; 125; 250; 500 µ”) 0.4; 0.8; 1.6; 3.2; 6.3; 12.5µm (16; 32; 63; 125; 250; 500 µ”)
Te s t e r s
®
Value +
Digital Coating Thickness Gauges Features: • Adopting magnetic induction and eddy current thickness measuring methods. • 3 measuring modes: direct mode, group mode (APPL1-APPL5) and continuous mode. • Data saving: 495 measuring results can be saved. • Testing data could be transmitted to PC. • Data deletnig and Error hint. • Conforms to the ISO standards.
Code No.: 506-10-0 Specification Measuring Range Measuring resolution 6 probes are available 5 statistic data Power Supply Dimension Weight
0-10000µm 0.1µm F400, F1, F1/90°, F10, CN02, & N1 Mean value (MEAN), Maximum (MAX) and Minimum (MIN) value, Number of measurements (NO.), and Standard deviation (S. DEV). DC 4.8V (rechargeable battery of 1.2V x 4pcs) 270 x 80 x 45mm Approx. 510g
Accessories Included in Package Qty. 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 2 pcs
Description Coordinate anvile (Table size: 100 x 100mm, Travel: 25 x 25mm Graduation of micrometer head: 0.01mm Thin shaft anvil (0.3-5mm diameter) Thin plate anvil Flat nose pliers Large V-notch anvil Small V-notch anvil Diamon pyramid penetrator Micro-Vickers standardized block
Optional Accessories Description Knoop penetrator CCD camera and image processing system
Shora Scale A Durometer Features:
Testers
• Small size, convenient for carrying and, easy operation. • Used for determining the Shore hardness number of rubber plastic materials precisely. It’s an ideal measuring instrument for using on the spot.
Code No.: 640-06-0 Specification Measuring Range Test Force Dimension Weight
20-90HA 0.55-8.06N (56-82 lgf) 110 x 58 x 30mm Approx. 500g
43 43
Te s t e r s
®
Value +
Brinell Hardness Tester Features: • Used for determining the Brinell hardness of unquenched steel cast iron, non-ferrous metals and soft bearing alloys and etc. • It’s steady and reliable for testing curved surface.
640-10-1
Specification Measuring Range Test Force
Code No.: 640-10-1 Mechanical Model 8-650HBW 1838.8, 2451.8, 7355.3, 9807, 29421N (187.5, 250, 750, 1000, 3000kgf) 230mm 120mm 380V AC or 220V AC. 50 or 60 Hz 700 x 268 x 842mm Approx. 210kg
• Mechanical models are with reversing switch. • Digital models are operating automatically, without manual error. • Large LCD screen for digital model.
640-10-5
Code No.: 640-10-5 Digital Model 4-650HBW 612.9, 980.7, 1225.9, 1838.8, 2451.8, 4903.5, 7355.3, 9807, 14710.5, 29421N (62.5, 100, 125, 187.5, 250, 500, 750, 1000, 1500, 1500, 3000kgf) 240mm 150mm 220V AC or 110V AC. 50 or 60 Hz 630 x 250 x 1000mm 210kg
Testers
Max. height of test piece Depth of throat Power Supply Dimension Weight Accessories Include in Package 1 pc Large flat anvil 1 pc Small flat anvil 1 pc V-notch anvil 3 pcs Tungsten carbide ball penetrator, one piece each of 2.5, 5, 10mm diameter 2 pcs Brinell standardized block 1 pc 20X readout microscope
44
Te s t e r s
®
Value +
Multifunctional Leeb Hardness Tester Features: • Used for determining the Leeb hardness of ferrous and non-ferrous metal precisely. • The measurd Leeb hardness value can be converted into Brinell, Rockwell, Vickers and Shore Hardness and etc.. • Small size is convenient for carrying.
Specification Working Temperature 1-40°C Power Supply DC 6.0V Dimension 268 x 86 x 47mm Weight Approx. 670g Accessories Include in Package 1 pc Samll positioner 1 bottle Binder 1 pc Leeb standardized block 1 pc Charger
Specification Measuring Range Impace Capacity Demensions Testing direction Weight Mass of impact body Diameter of carbide ball Application range
Code No.: 640-15-1 Model# D 330-890HL 11 Nmm Ø20 x 150mm Arbitrary 75g 5.5g 3mm Basic, suitable for Most of hardness tester
Code No.: 640-15-2 Model# DC 330-890HL 11 Nmm Ø20 x 85mm Arbitrary 50g 5.5g 3mm Suitable for hardness measuring of inner holes and small balls
Code No.: 640-15-3 Model# D+15 346-890HL 11 Nmm Ø20 x 165mm Arbitrary 80g 5.5g 3mm Suitable for hardness measuring of gear face, column inner surface and concave surface
Code No.: 640-15-4 Model# G 330-890HL 90 Nmm Ø20 x 250mm Arbitrary 250g 20g 5mm Suitable for hardness measuring of steel, cast steel, grey cast iron, nodular cast iron & non-ferrous metal
Standardized Hardness Block Description Brinell standardized Block
Rockwell standardized Block
Leeb standardized Block
Range of Hardness 200 ± 50 HBS 100 ± 25 HBS 80 - 88 HBA 85 - 95 HBB 20 - 30 HBC 35 - 55 HBC 60 - 70 HBC 80 - 88 HBA
Dimension 100 X 80 X 16mm
Weight 1kg
60 X 40 X 10mm
1kg
60 X 40 X 10mm
1kg
Testers
Penetrators for Hardness Tester Description Penetrator for Rockwell Hardness Tester Penetrator for Brinell Hardness Tester
Specification 120° Diamond cone penetrator Ø1.588mm (1/16”) steel ball penetrator Ø2.5, 5, 10mm Tungsten carbide ball penetrator
45
®
Value +
46
Te s t e r s
Value +
SENSOR SYSTEM
®
Sensor System Linears Scales. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Multifunctional Digital Readout . . . . . . . . . . . . . . . . . . . . 49
47
Sensor System
®
Value +
Linear Scales Features: • Response speed : over 60 meters per second. • No intermediate interface is needed over 100 meters long-distance data transmission. • Five bearings for excellent reorientation. • Multiple-shielding and soft metal cable protection and excellent anti-jamming and water- proof for EMI. • Anode process of Aluminum alloy for etching proof. • Anti-dust sealing is made by special plastics, with lower friction. • Easy installation and maintenance by special design, with good water-proof and dust-proof. • The sensors adopt the glass precise computation as the measuring benchmark. • Working Speed: 50M/min. for A series, 60M/min. for B series. • Ri: 50mm. Phase Error: 90º ± 15º. • Operating Temperature: 0ºC~40ºC, Storage Temperature: -20ºC~50ºC. • Resolution: 0.001mm. • Accuracy: ±(5 + L0/1000)µm.
A Series Effective Range 2” / 50mm 4” / 100mm 6” / 150mm 8” / 200mm 10” / 250mm 12” / 300mm 14” / 350mm 16” / 400mm 18” / 450mm 20” / 500mm 22” / 550mm 24” / 600mm 26” / 650mm 28” / 700mm
TECHNICAL DATA 48
B Series Single Cale Length 2M 2M 2M 2M 2M 2M 2M 2M 2M 2M 3.5M 3.5M 3.5M 3.5M
Code Number 600-02-0 600-04-0 600-06-0 600-08-0 600-10-0 600-12-0 600-14-0 600-16-0 600-18-0 600-20-0 600-22-0 600-24-0 600-24-0 600-28-0
A Series Linear Scales Specification Norminal Travel (L0): 0 - 700 mm Max. Travel (L1): L1=L0+30 mm Mounting Length (L2): L2=L0+132 mm Total Length (L3): L3=L0+149 mm
Effective Range 32” / 800mm 36” / 900mm 40” / 1000mm 44” / 1100mm 48” / 1200mm 52” / 1300mm 56” / 1400mm 60” / 1500mm 64” / 1600mm 68” / 1700mm 72” / 1800mm 76” / 1900mm 80” / 2000mm
Single Cale Length 3.5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M
Code Number 600-32-2 600-36-2 600-40-2 600-44-2 600-48-2 600-52-2 600-56-2 600-60-2 600-64-2 600-68-2 600-72-2 600-76-2 600-80-2
Sensor System
®®
Value Value ++
Muti-functional Digital Readout Features: • For digital linear scar measuring system and video measuring system. It can analyze and process the 2D measuring data, and it is widely used in the projector, the tool microscope, CCD measuring instruments and other two-dimension measuring instrument. • With function of measure, preset and construct the graphic elements such as the point, line, circle, angle, distance, rectangle, thread and so on. • The functions of Axis-skew and Coordinate-shift are very convenient. • It’s able to connect to foot-switch and edge detector, so it can quickly gather the data. • It can print the user programe, graphic elements. • The users can record the program and measure the same workpiece in large quantities. • With options of coordinate displaying: Plarity and cartesian, INC coordinate and ABS, Metric and Inch unit. • With Linear error correction and segmental linear error correction. • Store 100 permanent data and 10 temporary data.•
Specification Description Voltage Power Resolution Input Sales Signal Weight Dimension
601-01-0
Code No.: 601-01-0 2D Digital Readout AC 100V - 240V Max. 15W 0.1, 0.2, 0.5, 1, 2, 5, 10µm Orthogonality TTL, fREQUENCY 1mA 1.49kg 295 x 185 x 68mm
49
®
Value +
Asimeto (Guangzhou) Inc. www.asimeto.com.hk
Distributed By:
Printed In Hong Kong.