Caséta Wireless plug-in lamp dimmer with Pico® remote kit
Caséta Wireless plug-in lamp dimmer with Pico remote kit (P-PKG1P-WH) includes: •
(1) Plug-in lamp dimmer (PD-3PCL-WH)
•
(1) Pico remote control (PJ2-3BRL-WH-L01R)
I
© 09/2014 Lutron Electronics Co., Inc. P/N 368-3760 REV A
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer 369805c 2 09.30.14
CasétaT Wireless Plug-In Lamp Dimmer The CasétaT Wireless plug-in lamp dimmer controls lamp loads automatically through wireless sensors and wireless remote controls, providing a system that delivers energy savings, convenience, and ease of installation.
Receiving Device CasétaT Wireless Plug-In Lamp Dimmer
The CasétaT Wireless plug-in lamp dimmer uses LutronR patented Clear ConnectR RF Technology, which enables wireless communication with Radio Powr SavrT sensors and PicoR remote controls for total load control.
Transmitting Devices Radio Powr SavrT Sensors
Ceiling-mounted occupancy / vacancy sensor
Wall-mounted occupancy / vacancy sensor
Features • The CasétaT Wireless plug-in lamp dimmer provides dimming of multiple load types and allows remote control and occupancy/vacancy sensing when paired with wireless transmitting devices.
PicoR remote control
• LutronR patented Clear ConnectR RF Technology works through walls and floors. • Dual-receptacle design allows dimming of two plug-in lamps (lamps controlled together). • Plug-in lamp dimmer ideal for retrofit applications. • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption. • Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs. • Plug-in lamp dimmer can be converted to a switch to control non-dimmable loads. Load Types and Capacity*
CFL/LED Total Wattage
LED up to 100 W
CFL up to 100 W
Halogen up to 300 W
Incandescent up to 300 W
Incandescent/Halogen Total Wattage
0W
+
300 W
1 W – 33 W
+
200 W
34 W – 66 W
+
100 W
67 W – 100 W
+
0W
• Mixing bulb types (using a combination of CFL/LED and Incandescent/Halogen bulbs) reduces maximum wattage as shown in the chart above. • Plug-in lamp dimmer has a minimum load requirement of 10 W or one bulb from the compatible list. * See www.casetawireless.com/bulblist for the latest list of compatible bulbs.
Specificat ion Sub m it t al Job Name: Job Number:
Model Numbers:
Page
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer 369805c 3 09.30.14
Specifications Regulatory Approvals • cULus Listed • NOM certified • FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules • Industry Canada certified • COFETEL certified Power O perating voltage: 120 V~ 50/60 Hz Key Design Features* • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. • Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. • Dimmers always operate locally and do not require system control. • Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. • Green indicator LED. System Communications and Capacity • The plug-in lamp dimmer communicates with PicoR remote controls and Radio Power SavrT sensors through radio frequency (RF). • The plug-in lamp dimmer must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR remote controls and Radio Power SavrT sensors. • Up to ten transmitting devices may be associated to each plug-in lamp dimmer. Environment • Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%-90% humidity, non-condensing. Indoor use only. * For advanced features, tips on how to use CasétaTM Wireless dimmers with CFLs and LEDs, the complete CasétaTM Wireless product line, and more, please visit www.casetawireless.com/features
Specificat ion Sub m it t al Job Name: Job Number:
Model Numbers:
Page
CasétaT Wireless
PD-3PCL
Plug-In Lamp Dimmer 369805c 4 09.30.14
Operation Plug-In Lamp Dimmer Indicator LED On Raise Lower
Off
Dimensions Side View
Front View
31⁄8 in (79.4 mm)
23⁄16 in (55.6 mm)
13⁄16 in (30.2 mm)
Specificat ion Sub m it t al Job Name: Job Number:
Model Numbers:
Page
Pico®
Wireless Control and Mounting Accessories
Control Specification 369612e 5 09.30.14
Pico® Wireless Control (for North, Central, and South America) The PicoR wireless control is a flexible and easy to use device that allows the user to control LutronR wireless load-control devices from anywhere in the space. This battery-operated control requires no external power or communication wiring. Features • Provides control for the following: – CasétaT Wireless controls – Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM) – GRAFIK EyeR QS wireless systems – HomeWorksR QS wireless systems – Maestro WirelessR controls – PowPakR modules – RadioRAR 2 systems – SerenaR RF remote control shades – SivoiaR QS wireless systems • Control available in a variety of button marking options. • Easy reconfiguration for use as: – Handheld remote – Wall-mount control (with or without faceplate; faceplate adapter kit sold separately) – Car visor control (car visor clip sold separately) – A table top control (table top pedestal sold separately). • Battery-powered. Requires no wiring. • 10 year battery life (one CR2032 battery included). • Can provide control of blinds, curtains, or lighting devices within a range of 30 ft (9 m) through walls and 60 ft (18 m) line-of-sight. • BAA-compliant model numbers available. Add a “U” prefix to the model number.
Job Name: Job Number:
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
PicoR wireless control
Page:
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 6 09.30.14
Specifications
Regulatory Approvals
• LutronR Quality Systems registered to ISO 9001:2008. • FCC Certified (U.S.A.) • IC Certified (Canada) • COFETEL Certified (Mexico) • SUTEL Certified (Costa Rica) • Anatel Certified (Brazil)
Power
• Operating Voltage 3 V• (1) CR2032 Battery (included)
Environment
• Ambient operating temperature: 32 ˚F to 140 ˚F (0 ˚C to 60 ˚C) • Maximum 90% non-condensing relative humidity • Indoor use only
Warranty
• 1 Year Limited Warranty For additional Warranty information, please visit www.lutron.com/TechnicalDocumentLibrary/ 369-119_Wallbox_Warranty.pdf
System Communication and Capacity • Communicates using Radio Frequency (RF) at 431 MHz to 437 MHz. • Thousands of system addresses prevent interference between systems. • Can be assigned to control blinds, curtains or lighting devices that are within a 30 ft (9 m) range. • Can be configured as a scene or zone control in GRAFIK EyeR QS wireless applications.
Mounting Considerations
• Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception. • All RF devices must be mounted on non-conductive materials to ensure proper performance.
Job Name: Job Number:
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Page:
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 7 09.30.14
Model Number
For order quantities of 96 pieces or greater of the same model number, bulk packaging may be available. Mounting hardware is not included with bulk packaging. Please contact LutronR Customer Service for availability at 1.888.LUTRON1 (1.888.588.7661). PJ2-XXXX-GXX-XXX Button Marking Code (see next page) Color Code Button Configuration Code Frequency/Channel Code
Frequency/Channel Codes: Code J — 431.0 - 437.0 MHz Button Configuration Codes: Button Configuration 2 Button 2 Button with Raise/Lower 3 Button 3 Button with Raise/Lower
2 Button (2B)
Code 2B 2BRL 3B 3BRL
2 Button with 3 Button Raise/Lower (3B) (2BRL) Screen
3 Button with Raise/Lower (3BRL)
Color Codes: Gloss Color White Black Ivory Light Almond White / Gray
Code WH BL IV LA WG (Top and Raise buttons are White; Preset, Lower, and Bottom buttons are Gray) Shade
Blackout
Sheer
Continued on next page...
Job Name: Job Number: Blind
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Skylight
Drapery
Page:
Blind
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 8 09.30.14
Model Number (continued) PJ2-XXXX-GXX-XXX Button Marking Code Color Code (see previous page) Button Configuration Code (see previous page) Frequency/Channel Code (see previous page) Button Marking Codes: 2 Button
2 Button with Raise/Lower
3 Button
Light (L01)
Light (L01)
Screen
Screen
Light (L01)
Appliance (L02)
Screen (S08)
Shade
Shade (icons) (S01)
Blackout
Sheer
3 Button with Raise/Lower Shade
Light (L01)
Blind
Blind
Blind (S05)
Job Name: Job Number:
Shade (icons) (S01) Skylight
Skylight
Skylight (S06) S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Shade (text) (S02) Drapery
Drapery
Drapery (S07)
Blackout
Blackout (S03) Blind
Sheer
Sheer (S04)
Blind
Blind (S09) Page:
e
e1
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 9 09.30.14
Operation Top Button Lights brighten to full intensity and shades / draperies go to open limit. Activates scene 1 when used in scene mode with GRAFIK EyeR QS wireless applications.
Indicator LED Flashes to indicate a button press or when unit is in programming mode.
Raise Button (2BRL & 3BRL models only) Lights increase in intensity and shades / draperies move towards open limit.
Preset Button (3B & 3BRL models only) Tap once: Devices go to preset levels / positions. Activates scene 16 when used in scene mode with GRAFIK EyeR QS wireless applications.
Lower Button (2BRL & 3BRL models only) Lights decrease in intensity and shades / draperies move towards close limit. Bottom Button Lights dim to off and shades /draperies go to close limit. Activates “OFF” scene when used in scene mode with GRAFIK EyeR QS wireless applications.
Press and hold: To save new preset level or position, press and hold for 6 seconds.
Drape
Dimensions Measurements shown as: in (mm)
Shade 2
Screen
Drape
Blackout
Open
Open
Open
Open
Close
Close
2.6 (66)
0.31 (8) Close
Job Name:
1.30 (33)
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Shade 2
Job Number:
Close
Screen
Page:
Drape
Blackout
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 10 09.30.14
Pico® Pedestal Model Number Pedestals sold separately. Available in gloss finish only. L-PEDX-XX Color Code Capacity Code Capacity Codes: Capacity Single Double Triple Quadruple
Color Codes: Code 1 2 3 4
Gloss Color White Black
Code WH BL
Dimensions Measurements shown as: in (mm) Double Pedestal Pedestals sold separately.
Single Pedestal Pedestals sold separately. 1.46 (37) 2.96 (75) 1.77 (45)
3.19 (81)
Triple Pedestal Pedestals sold separately.
4.59 (117) Job Name: Job Number:
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Quadruple Pedestal Pedestals sold separately.
6.00 (152) Page:
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 11 09.30.14
Mounting Options Stand Alone Mounting Adhesive-Mount (included with PicoR wireless control)
crew-Mount (sold separately) S Model PICO-SM-KIT Note: Kit includes special screws to be used for more permanent mounting and / or for non-smooth surfaces.
2 1
2
1
Wallbox Adapter Model PICO-WBX-ADAPT (sold separately)
1
2
3
4
*Wallplate adapter / wallplate sold separately
Continued on next page... Job Name: Job Number:
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
Page:
Wireless Control and Mounting Accessories
Pico®
Control Specification 369612e 12 09.30.14
Mounting Options (continued) Wall-Mounting Kit Model PJ2-WALL-WH-L01R (sold separately)
Kit includes: • Pico® wireless control • Claro® wallplate (with wallplate adapter) • Wallbox adapter
2
1
3
4
Mounting to Metal Surfaces Coming Soon (sold separately)
2
UP
UP
UP
UP
1
Car Visor Model PICO-CARVISOR-CL (sold separately)
1
Job Name: Job Number:
2
S p e c i f i c at i o n S u b m i t ta l Model Numbers:
3
Page: