2016/2017

Calibration at Testo Industrial Services

Testo Industrial Services – More Assurance, better Service. www.testotis.com

Content

2

Page 3

Testo Industrial Services – Your calibration service provider

Page 6

Electrical calibration laboratory

Page 8

Thermodynamical calibration laboratory

Page 10

Mechanical calibration laboratory

Page 12

Calibration laboratory for flow rate

Page 14

Documentation of calibration

Page 16

Instrument management

Page 19

Electrical parameters – detailed overview

Page 25

Thermodynamical parameters – detailed overview

Page 29

Mechanical parameters – detailed overview

Page 31

Scope of Accreditations - DAkkS

Page 32

References

Page 33

Contact addresses

Testo Industrial Services Your calibration service provider

Testo Industrial Services is a leading service provider company

Driven by the requirements of our customer and our innovative

in the field of calibration, qualification, validation as well as test

ideas, we are permanently developing and improving the pro-

equipment management with more than 20 years of calibration

cedures of our company. We are accredited for more than 190

experience and know-how.

calibration procedures according to DIN EN ISO/IEC 17025.

Testo Industrial Services started as a calibration department at

Quality, reliability and low measurement uncertainties are the

Testo SE & Co. KGaA, the parent company, however was

cornerstones of our work.

founded as an independent subsidiary in 1999. With an average sales growth of nearly 20 %, Testo Industrial

Testo Industrial Services – More assurance, better service.

Services is one of the most successful calibration service providers in Germany and Europe.

Raimund Föhrenbacher Managing Director

Jürgen Hinn Managing Director

3

More assurance, better service! Full services – customized to meet your requirements

Testo Industrial Services is a certified and accredited service

Essential bases of our success are the qualification and personal

provider.

responsibility of our employees. Our common, successful future



were created with the high degree of self-motivation and coope-

We offer a complete portfolio of services. Our aim is to meet your

rative teamwork. More than 680 employees are active for you

individual wishes and requirements. With a team of qualified,

throughout Europe.

motivated and service-orientated employees, we are pleased to assist you in any issue as your calibration partner.

What characterizes us? We edit every order to your specific and individual requirements!

4

Always close at hand

With accredited calibration laboratories national …

Service-Center Winsen D-K-15070-01-07

Winsen

Logistic-Center Hannover

Hannover Service-Center Essen D-K-15070-01-06

Essen

Service-Center Marburg

Service-Center Rhein-Main-Neckar

Marburg

Ludwigshafen Abstatt

Customer-Center Abstatt

Ingolstadt Kirchzarten Lenzkirch

Logistic-Center Ingolstadt

Dingolfing München

Customer-Center Dingolfing Service-Center München D-K-15070-01-08

Head Office/Service-Center Kirchzarten D-K-15070-01-01

Service-Center Lenzkirch D-K-15070-01-05

Customer-Center München

... and International

Accréditation N° 2.1834 Temperature

Accréditation N° 1.5040

Accréditation N° 2.1835 Hygrometrie

5

Electrical calibration laboratory

6

Primary laboratory

LF laboratory

HF laboratory

In our electrical primary laboratory, we

In our LF laboratory we calibrate all

In our accredited laboratories as well as

calibrate high-quality standards in the

standard measuring equipment with very

on location, we calibrate HF devices up

electrical LF measuring technique.

small measuring uncertainties. For this

to 50 GHz. Furthermore, Testo Industrial

Our reference standards are calibrated

purpose, we have various measuring

Services has a special EMC measuring

directly at the national institutes (PTB,

stations with Fluke calibrators as

station. Automated procedures, expe-

METAS) and are used for the tracea-

references at our disposal. A HV mea-

rienced and qualified experts ensure a

bility of your reference standards. Our

suring station completes the LF calibra-

secure and accurate calibration of your

measuring uncertainties are some of the

tions.

devices.

smallest of all DAkkS laboratories.

Calibration of measuring modules Calibration range:

ü Cleaning of contact surfaces according to the type of calibration device ü Visual inspection ü Inspection of the measuring devices according to TRBS ü Technical inspection of all electrical functions of the measuring devices ü Calibration certificate with set/actual values as well as measuring uncertainties ü Calibration label ü Repair and adjustment according to mutual agreement

We calibrate various types of measuring modules and measuring cards of any manufacturer.

You find an extract of our scope of service for electrical measurements on page 19-24. 7

Thermodynamical calibration laboratory

8

Temperature

Surface temperature

Humidity

Select the appropriate calibration points

Surface temperature probes, respec-

In the humidity laboratory, the world-

for the operating range of your devices

tively sensors - either with contact or

wide highest accuracies of 0,2 % can be

within the measuring range of -196 up

non-contact are calibrated at various

achieved in our 2-pressure humidity ge-

to +1200 °C. All electronic temperature

measuring stations. The accredited

nerator. Measuring range from 5-95 %RH

measuring devices, resistance thermo-

calibration station for surface tempera-

(-18 ... +90 °C).

meters and thermal elements are calibra-

ture sets new standards for the calibrati-

ted either in the salt bath, liquid bath or

on of surface temperature probes.

in the tube furnace with a natrium heat pipe.

Primary laboratory temperature Calibration range:

ü Cleaning ü Visual inspection ü Technical inspection of all electrical functions ü Calibration certificate with set/actual values as well es measuring uncertainties

ü Calibration label ü Repair, exchange and adjustment according to mutual agreement

In our primary laboratory, we can calibrate devices with the smallest measuring uncertainties. At eight fixed points of the ITS-90, standard resistance thermometer and fixed point cells are calibrated.

You find an extract of our scope of service for thermodynamical measurements on page 25-27. 9

Mechanical calibration laboratory

10

Pressure laboratory

Torque measuring station

Force measuring station

One of the most accurate and reliable

We can calibrate all common torque

All common force devices and load cells

industrial calibration methods is the

wrenches, torque screw drivers and

(in which the force is determined by

pressure calibration with a pressure balan-

torque sensors at our torque measuring

the elastic deformation of a body) can

ce. Therefore Testo Industrial Services use

station.

be calibrated at our calibration station.

pressure balances of different types/model

The measuring station has a measuring

within the range of -1 up to 1100 bar as

The measuring range of the force

range up to 50 kN with a measuring

reference standards. The entire measuring

equipment is from 0,1 up to 1000 Nm

uncertainty of 0, 1 %.

range of our pressure laboratory is from

with a measuring uncertainty of 0,5 %.

-1 up to 5000 bar.

Acceleration

Calibration range:

ü Visual inspection ü Cleaning ü Technical inspection of the device functions ü Calibration certificate with set / actual values as well as measuring uncertainties

ü Calibration label ü Repair, exchange and adjustment according to mutual agreement

Monoaxial as well as triaxial acceleration sensors can be calibrated at our calibration equipment station in the range from 0,2 ... 20.000 Hz.

You find an extract of our scope of service for mechanical measurements on page 29-30. 11

Calibration laboratory for flow meters

12

Flow rate calibrators

Test bench laminar flow element

Test bench critical nozzles

Four piston calibrators are installed for

The test bench enables the calibration of

A total of ten pneumatic actuated critical

the calibration of your flow meter de-

flow meters for air and inert gases. The

venturis are installed in the test bench

vices for liquids.

capillaries inside the individual elements

for gas flow meters.

The unique construction of the different

provide a laminar flow of an otherwise

calibrators enables measurements from

turbulent flow rate.

different kind of liquids in a wide range from 10 µl

DIN EN ISO 8655

ISO

Nominal volume > 10 µl

DIN EN ISO 8655

Calibration item

DAkkS/ ISO

Calibration range

Conditions/measuring procedure

Shore hardness tester

ISO

Shore A, Shore 00, Shore D

Comparison measurement with PTB/ DAkkS calibrated reference and working standards

Pipettes

Hardness

! 30

Please contact us, if you haven`t found your test equipment or you need an offer for an calibration. On the basis of the variety of measuring instruments it`s not possible to list all variations in this catalog. Please use our contact form on our website: www.testotis.com

Testo Industrial Services

Scope of Accreditations – DAkkS

Deutsche Akkreditierungsstelle GmbH Scope of Accreditation D-K-15070-01-01 to DIN EN ISO/IEC 17025:2005 Period of validity: 30.06.2015 to 20.10.2016

Date of issue: 30.06.2015

Certificate bearer:

testo industrial services GmbH Gewerbestraße 3. 79199 Kirchzarten with the calibration laboratory:

testo industrial services GmbH Gewerbestraße 3. 79199 Kirchzarten

Scope of Accrediation D-K-15070-01-01 Areas of calibration:

Laboratory chief: Section leaders:

Accredited calibration laboratory since:

Dipl.-Phys. Eugen Sander Falko Harich Christian Kliche Stefan Jurgeit Tim Tröndle Slade Hartwell 08.03.1994

Electrical measurands DC and low frequency measurands Voltage*) - DC voltage*) - AC voltage*) Current*) - Direct current*) - Alternating current*) - AC/DC-Transfer - Power - Phase angle - DC resistance*) - Capacitance - Inductance - Voltage ratio - High voltage measurands High frequency measurands - Impedance (Reflection coefficient)*) - Power*) - Attenuation*) - Oscilloscope measurands*) - Rise time*) Time and frequency - Time interval*) - Frequency*) and rotational speed Page 1 of 58

*)

Dimensional measurands Length - Gauge blocks - Length-measuring instruments - Diameter - Thread Mechanical measurands - Force - Weighing scales*) - Pressure*) - Torque - Acceleration Volumetric flow rate measurands - Flow speed of gases Thermodynamic measurands Temperature measurands - Resistance thermometer*) - Thermocouple*) - Radiation thermometer - Temperature fixed-point cells - Temperature dry-block calibrators*) - Temperature indicators and –simulators - Climate chambers (temperature)*) - Temperature transmitter*) Humidity measurands - Measuring instruments for relative humidity - Climate chambers (humidity)*)

In-Situ Calibration as well

Definition of abbreviations used: see last page

Period of validity: 30.06.2015 to 20.10.2016

Convince yourself from our experience. See our accreditations: www.testotis.com

Date of issue: 30.06.201

Page 2 of 58

Direct to our accreditations:

31

References

Audi AG Onsite and lab calibration of all test equipments; test equipment management by PRIMAS exchange

Hekatron Technik GmbH Onsite calibration of all measuring parameters; test equipment management by PRIMAS online

MAHLE Behr GmbH & Co. KG Calibration of electrical and physical test equipment at several locations including test equipment management

KST Motorenversuch GmbH & Co. KG Calibration of engine testers

BMW AG Onsite and lab calibration of test equipment from all kind of measuring parameters

maxon motor AG Onsite and lab calibration at different locations in Europe. Test equipment management by PRIMAS online.

Robert Bosch GmbH Preferred Supplier of the Bosch Group Calibration of portable instruments for electrical parameters, entire test equipment management incl. calibration at different sites

Conrad Electronic SE Lab calibration of all measuring parameters

32

Miele & Cie. KG Calibration of electrical test benches onsite

Schunk Ingenierkeramik GmbH Lab calibration of dimensional and mechanical measuring parameters; management of the logistics for calibration as well as test equipment management by PRIMAS online

Dunkermotoren GmbH Onsite calibration of mechanical and electrical parameters; test equipment management by PRIMAS online

Thales Deutschland GmbH Calibration of various radiocommunication testers

GE Healthcare Europe GmbH Lab calibration of electrical, mechanical and thermodynamical measuring equipments as well as management of logistics for calibrations

Trumpf Gruppe Onsite and lab calibration at various locations in Germany, including test equipment management by PRIMAS online

TÜV Süd Automotive GmbH Lab calibration of all parameters, management of logistics for calibration as well as test equipment management by PRIMAS online

Webasto AG Onsite and lab calibration of all parameters and test equipments; test equipment management by PRIMAS exchange

Weidmüller Interface GmbH & Co. KG Onsite calibration on various locations in Europe. Including automatical calibration data exchange via VDI/ VDE 2623

Vossloh Locomotives GmbH Lab calibration of all parameters, management of logistics for calibration as well as test equipment management by PRIMAS online

What can we do for you? You can count on the Team from Testo Industrial Services when assistance is required. We want to get to know you, your company, your specific requirements and tasks. Please contact us for any calibration issue. We would like to show you what Testo Industrial Services can do for you!

Testo industrial services GmbH Head Office/Service-Center Kirchzarten Gewerbestraße 3 79199 Kirchzarten Fon +49 7661 90901-8000 Fax +49 7661 90901-8010 www.testotis.com [email protected]

Subsidiaries testo industrial services AG Gewerbestrasse 12a CH-8132 Egg Fon +41 43 277 10 30 Fax +41 43 277 10 31 Testo Industrial Services GmbH Geblergasse 94 AT-1170 Wien Fon +43 1 486 26 11 0 Fax +43 1 486 11 42 Testo industrial services Empresarial S.A. PI La Baileta C/ B, nº 5 ES-08348 Cabrils (Barcelona) Fon +34 (93) 2659 311 Fax +34 (93) 5172 470 Testo industrial services S.A.R.L. Zone d’activités Eurozone 3 rue Jules Verne F-57600 Forbach Fon +33 825 30 60 60 Fax +33 387 29 56 86

33

Testo industrial services GmbH Gewerbestraße 3 79199 Kirchzarten Fon Fax E-Mail

+49 7661 90901-8000 +49 7661 90901-8010 [email protected]

www.testotis.com

Direct to www.testotis.com: