A P P E N D I X
B
Cable and Power Cord Specifications The following sections provide cabling and port specifications for control devices and power connections: •
KVM Cable, page B-1
•
Supported Power Cords and Plugs, page B-2
•
AC Power Cord Illustrations, page B-3
KVM Cable The KVM cable provides a connection into the appliance, providing a DB9 serial connector, a VGA connector for a monitor, and dual USB ports for a keyboard and mouse. With this cable, you can create a direct connection to the operating system and the BIOS running on the appliance. Table B-1 lists supported cable components and part numbers. Table B-1
Cable Specifications
Supported Components
Cisco Part Number
KVM cable
37-1016-01
Figure B-1
KVM Cable 4 2
3
192621
1
1
Connector to appliance
2
DB9 serial connector
3
VGA connection for a monitor
4
Two-port USB connector for a mouse and keyboard
Cisco MDE 1100 Server Hardware Installation Guide OL-23764-01
B-1
Appendix B
Cable and Power Cord Specifications
Supported Power Cords and Plugs
Supported Power Cords and Plugs Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles. The jumper power cords, for use in racks, are available as an optional alternative to the standard power cords. For more information, contact Cisco technical support. The standard power cords have an IEC C19 connector on the end that plugs into the Power Distribution Unit (PDU), which is located in the bottom slot at the rear of the chassis. The optional jumper power cords have an IEC C19 connector on the end that plugs into the chassis’ PDU and an IEC C20 connector on the end that plugs into an IEC C19 outlet receptacle.
Note
Only the approved power cords or jumper power cords provided with the appliance are supported. Table B-2 lists the power cords for the appliance power supplies.
Table B-2
Power Cords for the Appliance
Length Cable Type
Part Number
Description
Comment
CAB-N5K6A-NA
37-0910-01
N5000 AC Power Cable, 6A, 250V
North America
Feet
Meters
8.2
2.5
6.6
2.0
Figure B-12 CAB-AC-250V/13A
37-0104-01
N5000 AC Power Cable, 13A, 250V
North America Figure B-11
CAB-9K12A-NA CAB-C13-C14-JMPR
72-0770-01 72-4128-01
N5000 Power Cord, 125VAC 15A NEMA 5-15 Plug
North America
8.2
2.5
N5000 AC Power Cable, 6A, 250V
Power strip style 2.2
0.7
Figure B-13 Figure B-14
SFS-250V-10A-AR
37-0095-01
N5000 AC Power Cable, 10A, 250V
Argentina
8.2
2.5
8.2
2.5
8.2
2.5
8.2
2.5
8.2
2.5
8.2
2.5
8.2
2.5
Figure B-2 CAB-9K10A-AU
72-0774-01
N5000 AC Power Cable, 10A, 250V
Australia Figure B-3
SFS-250V-10A-CN
37-0343-01
N5000 AC Power Cable, 10A, 250V
China Figure B-4
CAB-9K10A-EU
72-0771-01
N5000 AC Power Cable, 10A, 250V
Europe Figure B-5
SFS-250V-10A-ID
37-0863-01
N5000 AC Power Cable, 10A, 250V
India Figure B-6
SFS-250V-10A-IS
37-0344-01
N5000 AC Power Cable, 10A, 250V
Israel Figure B-7
CAB-9K10A-IT
72-0772-01
N5000 AC Power Cable, 10A, 250V
Italy Figure B-8
Cisco MDE 1100 Server Hardware Installation Guide
B-2
OL-23764-01
Appendix B
Cable and Power Cord Specifications AC Power Cord Illustrations
Table B-2
Power Cords for the Appliance (continued)
Length Cable Type
Part Number
Description
Comment
CAB-9K10A-SW
37-0727-01
N5000 AC Power Cable, 10A, 250V
Switzerland
Feet
Meters
8.2
2.5
United Kingdom 8.2
2.5
Figure B-9 CAB-9K10A-UK
72-0773-01
N5000 AC Power Cable, 10A, 250V
Figure B-10
AC Power Cord Illustrations This section includes the AC power cord illustrations. See Figure B-2 through Figure B-14. Figure B-2
SFS-250V-10A-AR
2500 mm
Cordset rating: 10 A, 250/500 V MAX Length: 8.2 ft Plug: EL 219 (IRAM 2073)
Figure B-3
186571
Connector: EL 701 (IEC60320/C13)
CAB-9K10A-AU
Plug: EL 206 A.S. 3112-2000)
Connector: EL 701C (IEC 60320/C15)
186581
Cordset rating: 10 A, 250 V/500V Length: 2500mm
Cisco MDE 1100 Server Hardware Installation Guide OL-23764-01
B-3
Appendix B
Cable and Power Cord Specifications
AC Power Cord Illustrations
SFS-250V-10A-CN
Plug: EL 218 (CCEE GB2009)
Cordset rating 10A, 250V (2500 mm)
Connector: EL 701 (IEC60320/C13)
CAB-9K10A-EU
Plug: M2511
Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Connector: VSCC15
Figure B-6
186576
Figure B-5
186573
Figure B-4
SFS-250V-10A-ID
OVE
Plug: EL 208
Cordset rating 16A, 250V (2500mm)
187490
Connector: EL 701
Cisco MDE 1100 Server Hardware Installation Guide
B-4
OL-23764-01
Appendix B
Cable and Power Cord Specifications AC Power Cord Illustrations
Figure B-7
SFS-250V-10A-IS
EL-212 16A 250V
Cordset rating 10A, 250V/500V MAX (2500 mm) Connector: EL 701B (IEC60320/C13)
Figure B-8
186574
Plug: EL 212 (SI-32)
CAB-9K10A-IT
Connector C15M (EN60320/C15 ) 186575
Plug: I/3G (CEI 23-16)
Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m)
Figure B-9
CAB-9K10A-SW
Connector: IEC 60320 C15 186578
Plug: MP232-R
Cordset rating: 10 A, 250 V Length: 8 ft. 2 in (2.5 m)
Cisco MDE 1100 Server Hardware Installation Guide OL-23764-01
B-5
Appendix B
Cable and Power Cord Specifications
AC Power Cord Illustrations
Figure B-10
CAB-9K10A-UK
Plug: EL 210 (BS 1363A) 13 AMP fuse
Figure B-11
Connector: EL 701C (EN 60320/C15)
186580
Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm
CAB-AC-250V/13A
Connector: EL 701 (IEC60320/C13)
Plug: EL312MoldedTwistlock (NEMA L6-20)
CAB-N5K6A-NA
Plug: NEMA 6-15P
Cordset rating: 10 A, 250 V Length: 8.2 ft
Connector: IEC60320/C13
186570
Figure B-12
186568
Cordset rating 13A, 250V (6.6 feet) (79±2m)
Cisco MDE 1100 Server Hardware Installation Guide
B-6
OL-23764-01
Appendix B
Cable and Power Cord Specifications AC Power Cord Illustrations
Figure B-13
CAB-9K12A-NA
Connector: IEC60320/C15
Plug: NEMA 5-15P
Figure B-14
192260
Cordset rating 13A, 125V (8.2 feet) (2.5m)
CAB-C13-C14-JMPR, Jumper Power Cord
Plug: SS10A
Connector: HS10S
186569
Cordset rating 10A, 250V (686mm)
Cisco MDE 1100 Server Hardware Installation Guide OL-23764-01
B-7
Appendix B
Cable and Power Cord Specifications
AC Power Cord Illustrations
Cisco MDE 1100 Server Hardware Installation Guide
B-8
OL-23764-01
