lly signed by wmholetech.
2010.01.06 :53 CST
Signature Not Verified For Question Please Contact with SGS www.tw.sgs.com
Test Report
No. : KA/2009/C2115
Date : 2010/01/06
Page : 1 of 6
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
*KA/2009/C2115*
The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description Style/Item No.
: :
Sample Receiving Date Testing Period
: :
ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMER POLYLAC® PA-757 2009/12/28 2009/12/28 TO 2010/01/06
============================================================================================
Test Requested
:
In accordance with the RoHS Directive 2002/95/EC, and its amendment directives.
Test Method
:
With reference to IEC 62321: 2008 Procedures for the Determination of Levels of Regulated Substances in Electrotechnical Products. (1) (2) (3) (4)
Determination of Cadmium by ICP-AES. Determination of Lead by ICP-AES. Determination of Mercury by ICP-AES. Determination of Hexavalent Chromium by UV/Vis Spectrometry.
(5) Determination of PBB and PBDE by GC/MS. Test Result(s)
:
Please refer to next page(s).
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : KA/2009/C2115
Date : 2010/01/06
Page : 2 of 6 *KA/2009/C2115*
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
Test results by chemical method (Unit: mg/kg)
Test Item (s): Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium Cr(VI) by alkaline extraction Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether
Method (Refer to) (1) (2) (3) (4)
Result No.1 n.d. n.d. n.d. n.d.
(5)
n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
2 2 2 2
RoHS Limit 100 1000 1000 1000
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
1000 1000 -
MDL
TEST PART DESCRIPTION: NO.1 : NATURE ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMER
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : KA/2009/C2115
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
Date : 2010/01/06
Page : 3 of 6 *KA/2009/C2115*
Note： 1. mg/kg = ppm；0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. "-" = Not Regulated 7. This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 8. This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : KA/2009/C2115
Date : 2010/01/06
Page : 4 of 6 *KA/2009/C2115*
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
1) These samples were dissolved totally by pre-conditioning method according to below flow chart.（Cr6+ test method excluded） 2) Name of the person who made measurement: Hungming Li 3) Name of the person in charge of measurement: Ray Chang Cutting / Preparation
Sample Measurement
Cr6
＋
Hg
Pb、Cd Acid digestion by suitable acid
Microwave digestion with
depended on different sample
HNO3/HCl/HF
Add appropriate amount of digestion reagent
material (as below table) Heat to appropriate temperature to extract
Filtration
Solution
Residue
Cool, filter digestate through filter
1) Alkali Fusion
Add diphenyl-carbazide
2) HCl to dissolve
for color development
ICP-AES Measure the absorbance Sample Material
Digestion Acid
Steel, copper, aluminum, solder
Aqua regia, HNO3, HCl, HF, H2O2
Glass
HNO3/HF
Gold, platinum, palladium, ceramic
Aqua regia
Silver
HNO3
Plastic
H2SO4, H2O2, HNO3, HCl
Others
Any acid to total digestion
at 540 nm by UV-VIS
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : KA/2009/C2115
Date : 2010/01/06
Page : 5 of 6 *KA/2009/C2115*
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang First testing process Optional screen process
Sample
Confirmation process Sample pretreatment
Screen analysis
Sample extraction/ Soxhlet method
Concentrate/Dilute Extracted solution
Filter
Analysis by GC/MS
Issue Report
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : KA/2009/C2115
Date : 2010/01/06
CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE TAINAN COUNTY, TAIWAN
Page : 6 of 6 *KA/2009/C2115*
** End of Report **
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Test Report
No. : CE/2010/11845
Date : 2010/01/18
Page : 1 of 6
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN.
*CE/2010/11845*
The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description Sample Receiving Date Testing Period
: : :
SCREWS 2010/01/11 2010/01/11 TO 2010/01/18
=========================================================================================== Test Requested
:
In accordance with the RoHS Directive 2002/95/EC, and its amendment directives.
Test Method
:
With reference to IEC 62321: 2008 Procedures for the Determination of Levels of Regulated Substances in Electrotechnical Products. (1) (2) (3) (4)
Determination of Cadmium by ICP-AES. Determination of Lead by ICP-AES. Determination of Mercury by ICP-AES. Determination of Hexavalent Chromium by Spot test / boiling water extraction Method.
(5) Determination of PBB and PBDE by GC/MS. Test Result(s)
:
Please refer to next page(s).
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
Test Report
No. : CE/2010/11845
Date : 2010/01/18
Page : 2 of 6 *CE/2010/11845*
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN. Test results by chemical method (Unit: mg/kg)
Test Item (s): Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium Cr(VI) by Spot test / boiling water extraction Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether
Method (Refer to) (1) (2) (3) (4)
Result No.1 n.d. n.d. n.d. Negative
2 2 2 See Note 4
(5)
n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
MDL
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
Test Report
No. : CE/2010/11845
Date : 2010/01/18
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN.
Page : 3 of 6 *CE/2010/11845*
TEST PART DESCRIPTION: NO.1 : MIXED SILVER COLORED, BLACK, MULTICOLORED AND SILVER-BLUE COLORED METAL SCREW (INCLUDING THE PLATING LAYER)
Note： 1. mg/kg = ppm; 0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. Spot-test: Negative = Absence of Cr(VI) coating / surface layer, Positive = Presence of Cr(VI) coating / surface layer; (The tested sample should be further verified by boiling-water-extraction method if the spot test result cannot be confirmed.) Boiling-water-extraction: Negative = Absence of Cr(VI) coating / surface layer. Positive = Presence of Cr(VI) coating / surface layer; the detected concentration in boiling-water-extraction solution is equal or greater 2 than 0.02 mg/kg with 50 cm sample surface area. 5. "-" = Not Regulated 6. The sample(s) was/were analyzed on behalf of the applicant as mixing sample in one testing. The above result(s) was/were only given as the informality value.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
Test Report
No. : CE/2010/11845
Date : 2010/01/18
Page : 4 of 6
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN.
*CE/2010/11845*
1) These samples were dissolved totally by pre-conditioning method according to below flow chart. 6+ （Cr test method excluded） 2) Name of the person who made measurement: Climbgreat Yang 3) Name of the person in charge of measurement: Troy Chang Cutting / Preparation
Sample Measurement
Cr6＋
Hg
Pb、Cd Acid digestion by suitable acid depended on different sample material (as below table)
Microwave digestion with HNO3/HCl/HF
Filtration
Add appropriate amount of digestion reagent
Heat to appropriate temperature to extract Residue
Solution
Cool, filter digestate through filter 1) Alkali Fusion 2) HCl to dissolve Add diphenyl-carbazide for
ICP-AES Sample Material
color development Digestion Acid
Steel, copper, aluminum, solder
Aqua regia, HNO 3, HCl, HF, H2O2
measure the absorbance
Glass
HNO3/HF
at 540 nm by UV-VIS
Gold, platinum, palladium, ceramic
Aqua regia
Silver
HNO3
Plastic
H2SO4, H2O2, HNO3, HCl
Others
Any acid to total digestion
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
Test Report
No. : CE/2010/11845
Date : 2010/01/18
Page : 5 of 6
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN.
*CE/2010/11845*
PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement: Roman Wong 2) Name of the person in charge of measurement: Shinjyh Chen First testing process
Sample
Optional screen process Confirmation process Sample pretreatment
Screen analysis
Sample extraction/ Soxhlet method
Concentrate/Dilute Extracted solution
Filter
Analysis by GC/MS
Issue Report
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
Test Report
No. : CE/2010/11845
Date : 2010/01/18
JING-YING INDUSTRIAL SCREW CO., LTD. NO. 5, LANE 155, SIHWEI RD., WUGU TOWNSHIP, TAIPEI COUNTY 248, TAIWAN.
Page : 6 of 6 *CE/2010/11845*
** End of Report **
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。 This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五權路33號 t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.com Member of the SGS Group (SGS SA)
