TAI
AD E IN TAI WAN • I
T 'S
E L L MA D E I N
• IT'S D
EI
EL
MA
LM
V E RY W E LL
N TA
I WAN • IT 'S VE R
YW
9001
RY W
N WA
14001
VE
C FRAME MECHANICAL PRESS SN1 series C FRAME MECHANICAL PRESS SN2 series
SN1 : •High torque, low noise wet clutch and brake. •High accuracy transmission gears and high rigidity crank ensure press long life and accuracy. •User-friendly design and all-function electric control system enable the accessories to attach easily.
Model Capacity Length of Stroke Fixed Speed Stroke per Variable Speed Minute
SN1-25 S H P Tons 25 (I) mm 80 50 35 90 110 140 70 80 80 S.P.M | | |
SN2 : •High torque, low noise wet clutch and brake. •Rigid frame with less deflection. •Many protective devices ensure operation safety. •User-friendly design and all-function electric control system provide high automation compatibility.
SN1-35 SN1-45 SN1-60 SN1-80 SN1-110 SN1-160 SN1-200 SN1-250 S H P S H P S H P S H P S H P S H P S H P S H P 35 45 60 80 110 160 200 250 90 60 40 110 70 45 130 80 50 150 100 60 180 110 70 200 130 80 220 150 90 250 180 100 80 100 130 70 90 120 60 80 100 60 80 100 50 70 90 40 60 80 35 50 65 30 45 55 60 70 80 50 60 80 40 55 70 40 50 65 35 45 60 30 35 50 25 30 40 22 30 30 | | | | | | | | | | | | | | | | | | | | | | | |
110 140 180 95 130 170 85 120 160 75 110 150 75 100 140 65 90 125 50 70 100 45 60 85 40 50 70
Tonnage Rating Point mm 3.2 2.3 3.2 2.3 3.2 2.3 4 2.3 5 3.2 5 3.2 6 4 6 4 6 4 Die Height (D.H)mm 230 200 250 220 270 240 300 270 330 300 350 320 400 360 450 400 450 400 Area of Slide (LRxFB)mm 330x250 380x300 430x350 480x400 560x460 650x520 720x580 860x650 960x720 Area of Bolster (LRxFB)mm 700x320 780x400 840x440 900x520 1050x600 1150x680 1250x760 1400x840 1500x900
Model Capacity Length of Stroke Stroke Fixed Speed per Variable Speed Minute Tonnage Rating Point Die Height
Tons (I) mm S.P.M
SN2-110 S H 180 50 35-65
110
SN2-160 S H
110 70
200 40
45-90
30-50
160
130 60
230 35
35-70
25-45
mm 5 6 (D.H)mm 400 350 450 400 (LRxFB) Area of Slide 1430x520 1560x580 mm (LRxFB) Area of Bolster 1880x680 2040x760 mm ※Materials and specifications are subject to change without notice.
1
P R O D U C T S
L I N E
SN2-200 S H
500
200
7
SN2-250 S H
150 50
250 30
30-60
22-40
450
550
250
7
SN2-300 S H
180 45
280 30
30-50
20-35
450
550
300
180 45 30-50
7
450
1850x650
2100x700
2100x800
2420x840
2700x920
2700x940
STRAIGHT SIDE MECHANICAL PRESS SNS1 series STRAIGHT SIDE MECHANICAL PRESS SNS2 series
SNS1 : •Straight side frame designed virtually eliminates angular deflection, providing increased precision for progressive die applications and reducing maintenance costs on tooling. •The slide area is 15%~25% greater than comparable C-frame presses to allow for larger tools. The large 6-point gibs are centered in the slide body, to provide better resistance to off-center loads.
Model Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height Area of Slide Area of Bolster
tf (I) mm SPM
150 40-75
mm
80
100 55-125
SNS1-110 S H 180 35-65
5
110
110 50-110
200 30-55
5
160
130 40-95
SNS1-200 S H 220 25-45
6
tf (I) mm SPM
SNS2-160 S H
160 200 130 30-55 40-85
SNS2-200 S H
200 230 150 25-45 35-70
200
150 35-80
SNS1-250 S H 250 22-40
6
SNS2-250 S H
250 250 180 22-40 30-60
mm
6
4
7
4
7
5
mm
450
400
500
450
550
450
Area of Slide
(LRxFB) mm
1560x650
1850x750
Area of Bolster
(LRxFB) mm
1850x760
2200x840
950
1000
Height of Bolster
SNS1-160 S H
250
SNS1-300 S H
180 30-60
280 20-35
6
300
180 25-50
6
mm 330 300 350 320 400 360 450 400 450 400 500 400 (LRxFB)mm 700x460 800x520 900x580 1000x650 1100x720 1150x800 (LRxFB)mm 900x680 900x460 1000x680 1000x520 1150x760 1150x600 1250x840 1250x680 1350x900 1350x750 1400x1050 1400x850
Model Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height
SNS1-80 S H
SNS2 : •The symmetrical front-rear column structure design minimizes deflection and is most suitable for precision progressive die applications. •High torque, enclosed wet clutch brake unit requires minimal maintenance, eliminates noise and pollution caused by airborne particles, and significantly extends lining life.
(G)mm
※Materials and specifications are subject to change without notice.
1
2200x820
2
2500x820
1
2500x920
2
2800x920
1 2
1100 1150
SNS2-300 S H
300 280 180 20-40 25-50 7
5
550 450 1 2200x900 2 2500x900 3 2800x900 4 3100x900 1 2500x1000 2 2800x1000 3 3100x1000 4 3400x1000 1,2 1150 3,4 1250
SNS2-400 S H
400 300 200 20~40 25-50 7
6
SNS2-500 S H
500 300 200 20~40 25~50 7
6
600 450 1 2200x1000 2 2500x1000 3 2800x1000 4 3100x1000 1 2500x1100 2 2800x1100 3 3100x1100 4 3400x1100
600 450 1 2200x1100 2 2500x1100 3 2800x1100 4 3100x1100 1 2500x1200 2 2800x1200 3 3100x1200 4 3400x1200
1250
1250
P R O D U C T S
L I N E
2
STRAIGHT SIDE MECHANICAL PRESS SLS1 series STRAIGHT SIDE MECHANICAL PRESS SLS2 series
SLS2 : •The symmetrical front-rear column structure design minimizes deflection and is most suitable for precision progressive die applications. •Fast approach/ return speeds with reduced slide velocity during the working portion of the stroke, minimizing vibration and noise while extending tooling life.
SLS1 : •Straight side frame designed virtually eliminates angular deflection, providing increased precision for progressive die applications and reducing maintenance costs on tooling. •Fast approach/return speeds with reduced slide velocity during the working portion of the stroke, minimizing vibration and noise while extending tooling life.
Model Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height Area of Slide Area of Bolster
tf (I) mm SPM mm
Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height
tf (I) mm SPM mm mm (LRxFB) mm
Area of Bolster Height of Bolster
SLS1-110 S H
SLS1-160 S H
SLS1-200 S H
SLS1-250 S H
SLS1-300 S H
100
180
110
200
130
220
150
250
180
280
55-110
35-65
50-100
30-55
40-85
25-45
35-70
22-40
30-60
20-35
80
150 40-75 5
110
5
(LRxFB) mm (G)mm
SLS2-160 S H
SLS2-200 S H
160 200 130 30-55 40-85 6 5 450 400
200 230 150 25-45 35-70 7 5 500 450
1560x650
1850x750
1850x760 950
2200x840 1000
※Materials and specifications are subject to change without notice.
3
P R O D U C T S
L I N E
160
6
200
6
250
6
300
180 25-50 6
(D.H) mm 330 300 350 320 400 360 450 400 450 400 500 400 (LRxFB)mm 700x460 800x520 900x580 1000x650 1100x720 1150x800 (LRxFB)mm 900x680 900x460 1000x680 1000x520 1150x760 1150x600 1250x840 1250x680 1350x900 1350x750 1400x1050 1400x850
Model
Area of Slide
SLS1-80 S H
SLS2-250 S H
250 250 150 22-40 30-55 7 6 550 450 1
2200x820
2
2500x820
1
2500x920
2
2800x920
1 2
1100 1150
SLS2-300 S H
300 280 150 20-35 25-45 7 7 550 450 1 2200x900 2 2500x900 3 2800x900 4 3100x900 1 2500x1000 2 2800x1000 3 3100x1000 4 3400x1000 1,2 1150 3,4 1250
SLS2-400 S H
SLS2-500 S H
400 300 200 15-30 25-40 7 7 600 450 1 2200x1000 2 2500x1000 3 2800x1000 4 3100x1000 1 2500x1100 2 2800x1100 3 3100x1100 4 3400x1100
500 300 200 15-30 25-40 7 7 600 450 1 2200x1100 2 2500x1100 3 2800x1100 4 3100x1100 1 2500x1200 2 2800x1200 3 3100x1200 4 3400x1200
1250
1250
STRAIGHT SIDE MECHANICAL PRESS SAG series STRAIGHT SIDE ECCENTRIC GEAR MECHANICAL PRESS SE2 series SE2 : •Hydraulic tie rod frame design to reduce the operating vibration and noise. •Fit with long stroke drawing and blanking operation. •Without side load on slide to keep the operation accurately and smoothly.
SAG : •Hydraulic overload protect device. •Precision slide guiding with 8 points gibbing arrangement. •Air counter balance device. •Auto lub. system with default monitor.
Model Capacity Length of stroke Stroke per minute Tonnage rating point Die height Adjustment of slide Area of slide (L.RxF.B)
mm
Area of bolster (L/RxF.B)
mm
tf mm SPM mm mm mm 1 2 3 4 1 2 3 4
Model Capacity Length of stroke Stroke per minute Tonnage rating point Die height Adjustment of slide Area of slide (L.RxF.B) Area of bolster (L/RxF.B)
mm
mm
tf mm SPM mm mm mm 1 2 3 4 1 2 3 4
SAG-300 S H
SAG-400 S H
SAG-500 S H
SAG-600 S H
300 400 500 600 300 200 400 250 450 250 450 250 15~30 25~50 15~26 25~50 12~22 25~50 12~22 25~50 13 6.5 13 6.5 13 6.5 13 6.5 600 700 700 700 200 250 250 250 2200x1200 2500x1400 2500x1450 2500x1550 2500x1200 2800x1400 2800x1450 2800x1550 2800x1200 3100x1400 3100x1450 3100x1550 3100x1200 3400x1400 3400x1450 3400x1550 2200x1370 2500x1400 2500x1450 2500x1550 2500x1370 2800x1400 2800x1450 2800x1550 2800x1370 3100x1400 3100x1450 3100x1550 3100x1370 3400x1400 3400x1450 3400x1550
SE2-400 S H
400 500 15~26 13 6.5 700 300 2500x1400 2800x1400 3100x1400 3400x1400 2500x1400 2800x1400 3100x1400 3400x1400
SE2-500 S H
500 500 12~24 13 6.5 800 400 2500x1450 2800x1450 3100x1450 3400x1450 2500x1450 2800x1450 3100x1450 3400x1450
※Materials and specifications are subject to change without notice.
S
13
SE2-600 H 600 500 12~22
6.5 800 400 2500x1550 2800x1550 3100x1550 3400x1550 2500x1550 2800x1550 3100x1550 3400x1550
SAG-800 S H
SAG-1000 S H
SAG-1200 S H
800 1000 1200 450 300 450 300 450 300 10~20 20~40 10~20 20~40 10~20 20~40 13 6.5 13 6.5 13 6.5 800 800 800 300 300 300 2800x1550 3100x1550 3400x1550 3100x1550 3400x1550 3700x1550 3400x1550 3700x1550 4000x1550 3700x1550 4000x1550 4300x1550 2800x1550 3100x1550 3400x1550 3100x1550 3400x1550 3700x1550 3400x1550 3700x1550 4000x1550 3700x1550 4000x1550 4300x1550
SE2-800 S
800 600 10~18 13 1000 400 2800x1700 3100x1700 3400x1700 3700x1700 2800x1700 3100x1700 3400x1700 3700x1700
SE2-1000 S 1000 600 10~18 13 1000 400 3100x1700 3400x1700 3700x1700 4000x1700 3100x1700 3400x1700 3700x1700 4000x1700
SE2-1200 S 1200 800 10~18 13 1100 500 3400x1700 3700x1700 4000x1700 4300x1700 3400x1700 3700x1700 4000x1700 4300x1700
P R O D U C T S
L I N E
4
HEAVY STAMPING LINK MOTION MECHANICAL PRESS SM1 series PROGRESSIVE STAMPING LINK MOTION MECHANICAL PRESS SM2 series SM2 : •High Precision & Rigidity Structural Design •Low Forming Speed •Unique Dynamic Balance System •Extremely Small Total Clearance
SM1 : •Link motion with a reduced touch speed and cause less vibration and noise. •Increased productivity by up to 30% compared to conventional presses. •EAn 8-point square slide guide that with limited gib clearance. •Excellent rigid construction is built for heavy loading, drawing and blanking.
Model Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height Adjustment of Slide Area of Slide Area of Bolster
Model
Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height Adjustment of Slide Area of Slide
Area of Bolster
tf (I) mm SPM mm mm mm (LRxFB) mm (LRxFB) mm
tf (I) mm SPM mm mm mm 1 (LRxFB)mm 2 3 1 2 (LRxFB)mm 3
S
P R O D U C T S
L I N E
300
250 20-50 13 600
1000x900 1000x1000
SM2-200 200
50-120 450 1500x900 1800x900 2100x900 1500x1000 1800x1000 2100x1000
※Materials and specifications are subject to change without notice.
5
SM1-300
H
S
120 40-70 6.5 400
300 20-40 13 650
150
SM2-300 300 200 40-100 6.5 550 100 1800x1000 2100x1000 2400x1000 1800x1100 2100x1100 2400x1100
SM1-500 500
H 150 30-55 6.5 400
1200x1100 1200x1200
SM2-400 400
30-80 650 2100x1100 2400x1100 2700x1100 2100x1200 2400x1200 2700x1200
SM1-800 S 800 300 15-30 13 750 150 1500x1300 1500x1500
SM2-600 600 250 30-70 10 750 150 2400x1250 2700x1250 3000x1250 2400x1400 2700x1400 3000x1400
PRECISION HIGH SPEED PRESSES SHP series PROGRESSIVE STAMPING FORGING KNUCKLE MECHANICAL PRESS SPF2 series
SHP: •Equip with 2 post, 1 plunger guidance system achieves high precision. •Unitized extra-sturdy casting frame to minimized angular deflection and stamping noise. •Reduced distance between feeder and die set to minimized material twist issue. •Applicable to integrate with mechanical roller feeder, grip feeder and servo feeder.
Model
Capacity Length of Stroke Stroke per Minute Die Height Adjustment of Slide Area of Slide Area of Bolster Bolster Opening Working Height
Model
Capacity Length of Stroke Stroke per Minute Tonnage Rating Point Die Height Adjustment of Slide Area of Slide (LRxFB)mm
Area of Bolster(LRxFB)mm
Tons (I) mm S.P.M. (D.H)mm (R)mm (LRxFB)mm (LRxFB)mm (LRxFB)mm mm
Tons (I) mm S.P.M mm (D.H)mm (R)mm 1 mm 2 3 1 mm 2 3
SHP-25
SPF2 : •An ultra rigid H frame structure reduces deflection to less than 1mm. •Patented 9-Iinkage mechanism maintains a unique 44˚ stoppage of slide at B.D.C., enabling precision cold forming e.g. coining & sizing processes. •Improved knuckle driving mechanism that never moves to full perpendicular position and eliminates die sticking near B.D.C. •Very rigid slide and bed creating very low deflection which is less than 1/33000
SHP-35
SHP-50
25 20 30 40 200-700 200-600 215 210 205 30 300x210 500x300 180x90 795
35 20 30 40 200-700 200-600 245 240 235 40 370x300 600x390 240x100 840
50 20 30 40 200-700 200-600 265 260 255 40 480x340 720x450 300x130 860
SPF2-200
SPF2-300
SPF2-400
200 120 40-100 5 450
1200x600 1500x600 - 1200x800 1500x800 -
300 120 40-85
50 1500x700 1800x700 - 1500x900 1800x900 -
6.5 500
400 120 30-70
1500x800 1800x800 2100x800 1500x1000 1800x1000 2100x1000
※Materials and specifications are subject to change without notice.
P R O D U C T S
L I N E
6
Top Development
■
Eternal Service
China Factory
Headquarters
SHIEH YIH MACHINERY INDUSTRY CO., LTD.
SEYI-AMERICA, INC.
HEADQUARTERS NO.446, Nan Shang Rd., Kueisan Hsiang, Taoyuan, Taiwan TEL: +886-3-352-5466 FAX: +886-3-352-5488 www.seyi.com
CALIFORNIA
KUNSHAN FACTORY TEL: +86-512-5740-7900 www.seyi.com.cn DONGGUAN BRANCH TEL: +86-769-8502-8531 www.seyi.com.cn
TENNESSEE
FAX: +86-512-5740-7899 FAX: +86-769-8502-8530
SEYI Presses Europe GmbH EUROPE
www.seyi-europe.com
The contents disclosed in this catalogue are exclusive property of Shieh Yih Machinery Industry Co., Ltd. Unauthorized duplication or use part or whole of this catalogue is prohibited.
12110506
XIE YI TECH MACHINERY(CHINA) CO., LTD.
TEL: +1-909-839-1151 FAX: +1-909-839-1150 www.seyiamerica.com TEL: +1-931-455-7700 FAX: +1-931-455-6092 www.seyiamerica.com
Tennessee
TEL: 04-24733326
Los Angels