BROADBAND DIRECTIVE ANTENNAS

Model AJ3 - AJ3 7/8. 3 ELEMENTS BROADBAND ANTENNA FM BAND 87.5-108 MHz. - BAND II - B.BAND DIRECTIONAL ANTENNA - LINERAR POLARIZATION HORIZONTAL OR VERTICAL - STAINLESS STEEL INOX AISI 304 - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED Electrical Data

Mechanical Data

Model Impedance Frequency Range Gain VSWR Polarization Max Power Combinations

AJ3 – AJ3 7/8 50 ohm. 87.5 - 108 MHz. 4.5 dB. (ref.to half wave dipole) < 1.25 linear horizontal or vertical AJ3 2000W AJ3 7/8 3000W The antenna is especially suitable as a component in array to achieve various radiation patterns.

Wind Load Max Wind Velocity Weight Mounting Dimensions

65kg. 150km/h 150km/h. kg. 12.5 ref. stainless steel with standard clamp 50-110mm. diam. 1540x1700x100mm.

Materials: Mounting hardware Insulator Dipole Internal

Galvanized steel PTFE (Teflon) stainless steel Aluminium, Copper

Connectors Type Request N Female LC or 7/16 Female 7/8 Female

800W.max 2000W.max 3000W.max

Return loss

0 87,5 -5

89,5

91,5

93,5

95,5

97,5

99,5

101,5

-10 dB. -15 -20 -25 -30

Radiation Pattern at mid band (98MHz)

Half Power Beamwidth

103,5

105,5

108mhz.

Model AJ3x2 - AJ3x2 HP. TWO 3 ELEMENTS BROADBAND ANTENNA FM BAND 87.5-108 MHz. - BAND II - B.BAND DIRECTIONAL ANTENNA - LINERAR POLARIZATION HORIZONTAL OR VERTICAL - STAINLESS STEEL INOX AISI 304 - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED

Electrical Data

System composition

Model Impedance Frequency Range Gain Polarization VSWR Max Power

AJ3x2 - 2 AJ3, 2 ways wide-band splitter with N-type connectors and 2 coaxial cables RG213 with N-type end connectors. AJ3x2 HP - 2 AJ3, 2 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 2 coaxial cables RG213 with N-type end connectors.

AJ3x2 - AJ3x2 HP 50 ohm. 87.5 - 108 MHz 7.5 dB. (ref.to half wave dipole) linear horizontal or vertical < 1.25 800 W (AJ3x2) 1000 W (AJ3x2 HP)

Mechanical Data Antenna height Weight Wind load (150 Km/h) Max wind velocity Materials: Mounting hardware Insulator Dipole Internal

4650 mm. 30 Kgs (Without mounting hardware) 46 Kgs. 150 Km/h. Galvanized steel PTFE (Teflon) stainless steel Aluminium, Copper

Horizontal Diagram NORT H

Vertical Diagram 0

100

80 -3.1

60

WEST Er (u)

-6

Er (%)

EAST 1.0

0.7

0.5

0.3

0.1

-20

-10.5

-6

-3.1

0

Er (dB)

40 -10.5

20 -20

0 0,0

10,0

20,0

30,0

40,0

50,0 Dep (°)

SOUTH

60,0

70,0

80,0

90,0

Er (dB)

Model AJ3x4 - AJ3x4 HP. FOUR 3 ELEMENTS BROADBAND ANTENNA FM BAND 87.5-108 MHz. - BAND II - B.BAND DIRECTIONAL ANTENNA - LINERAR POLARIZATION HORIZONTAL OR VERTICAL - STAINLESS STEEL INOX AISI 304 - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED

Electrical Data

System composition

Model Impedance Frequency Range Gain Polarization Combinations

AJ3x4 - 4 AJ3, 4 ways wide-band splitter with N-type connectors and 4 coaxial cables RG213 with N-type end connectors. AJ3x4 HP - 4 AJ3, 4 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 4 coaxial cables RG213 with N-type end connectors.

AJ3x4 - AJ3x4 HP 50 ohm. 87.5 - 108 MHz. 10.5 dB. (ref.to half wave dipole) linear horizontal or vertical The antenna is especially suitable as a component in array to achieve various radiation patterns. < 1.25 800 W (AJ3x4) 2000 W (AJ3x4 HP)

VSWR Max Power

Mechanical Data Antenna height Weight Wind load (150 Km/h) Max wind velocity Materials: Mounting hardware Insulator Dipole Internal

Horizontal Diagram

9850 mm. 60 Kgs (Without mounting hardware) 92 Kgs. 150 Km/h Galvanized steel PTFE (Teflon) stainless steel Aluminium, Copper

Vertical Diagram

NORTH

0

100

80

-3.1

60

-6

Dep (°) WEST Er (u)

EAST 1.0

0.7

0.5

0.3

0.1

-20

-10.5

-6

-3.1

0

Er (dB

40 -10

20

-20

0 0,0

10,0

20,0

30,0

40,0

50,0 Er (%)

SOUTH

60,0

70,0

80,0

90,0

Er (dB)

BROADBAND CIRCULAR POLARIZATION ANTENNAS

Model ACP 1/ ACP 1-7/8. CIRCULAR BROADBAND ANTENNA FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - DESMOUNTABLE - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas. Electrical Data Model Impedance Frequency Range Gain Polarization VSWR Max Power Combinations

Mechanical Data

ACP 1 – ACP 1-7/8 50 ohm. 87.5 - 108 MHz. See table Right circular < 1.4 ACP 1 2000W ACP 1-7/8 3000W Collinear system

Wind Load Max Wind Velocity Weight Mounting Dimensions Option

38kg. 150km/h 200km/h. 14.6 kg. with standard clamp 50-110mm. diam. 1550x1130x1130mm. Radome fiberglass white

Return loss 87,5 0

89,5

91,5

93,5

95,5

97,5

99,5

101,5

103,5

105,5

108MHz.

-5 -10 dB. -15 -20 -25

RADIATION PATTERN at mid band.

Detail of alimentation dipoles

Horizontal component with pole mounting 100mm diameter at 98 MHz.

Model ACP 1x2 - ACP 1x2 7/8 TWO CIRCULAR POLARIZATION ANTENNA SYSTEM FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - DESMOUNTABLE - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas.

Electrical Data Model Impedance Frequency Range Gain Polarization Vertical Pattern VSWR Combinations Max Power

System composition ACP1x2 - 2 ACP1, 2 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 2 coaxial cables RG213 with N-type end connectors. ACP1x2 7/8 - 2 ACP1 7/8, 2 ways wide-band splitter (Input EIA 1+5/8" flange and EIA 7/8" flange output) and 2 coaxial cables 1/2" with EIA 7/8" end flange.

ACP 1x2 - ACP1x2 7/8 50 ohm. 87.5 - 108 MHz. 1.5 dB (referred to a half wave dipole) Right circular Null fill, beam tilt and special requirements to order < 1.4 Collinear system 1000 W (ACP1x2) 3000 W (ACP1x2 7/8)

Mechanical Data Wind Load Max Wind Velocity Weight Mounting Antenna height Option

Horizontal Pattern (F=95 MHz)

70kg. 150km/h 200km/h. 35 kg. with standard clamp 50-110mm. diam. 3400 mm. Radome fiberglass white

Vertical Diagram 0

100

80

-3.1

60

-6

Er (%)

40

-10.5

20

-20

0 0,0

4,0

8,0

12,0

16,0

20,0 Dep (°)

24,0

28,0

32,0

36,0

Er (dB)

Model ACP 1x4 FOUR CIRCULAR POLARIZATION ANTENNA SYSTEM FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - DESMOUNTABLE - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas.

Electrical Data Model Impedance Frequency Range Gain Polarization Vertical Pattern VSWR Combinations Max Power

System composition ACP 1x4 - ACP1x4 7/8 50 ohm. 87.5 - 108 MHz. 4.5 dB (referred to a half wave dipole) Right circular Null fill, beam tilt and special requirements to order < 1.4 Collinear system 3000 W (ACP1x4) 5000 W (ACP1x4 7/8)

ACP1x4 - 4 ACP1, 4 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 4 coaxial cables RG213 with N-type end connectors. ACP1x4 7/8 - 4 ACP1 7/8, 4 ways wide-band splitter (Input EIA 1+5/8" flange and EIA 7/8" flange output) and 4 coaxial cables 1/2" with EIA 7/8" end flange.

Mechanical Data Wind Load Max Wind Velocity Weight Mounting Antenna height Option

138kg. 150km/h 200km/h. 75 kg. with standard clamp 50-110mm. diam. 8600 mm. Radome fiberglass white

Vertical Diagram

Horizontal Pattern (F=95 MHz)

0

100

80

-3.1

60

Er (%)

-6

40

-

20

-20

0 0,0

4,0

8,0

12,0

16,0

20,0 Dep (°)

24,0

28,0

32,0

36,0

Er (dB)

Model ACP 2 – ACP 2-7/8 CIRCULAR BROADBAND ANTENNA / R FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas. Electrical Data Model Impedance Frequency Range Gain Polarization VSWR Max power Combinations

Mechanical Data ACP 2 50 ohm. 87.5 - 108 MHz. -1.5 dB (referred to a half wave dipole) Vertical and horizontal < 1.35 ACP 2 2000W ACP 7/8 3000W Collinear system

Wind Load Max Wind Velocity Weight Mounting Dimensions

50kg. 150km/h 150km/h. 21 kg. with standard clamp 50-110mm. diam. 2210x1300x1300 mm.

Connectors Type Request N Female LC or 7/16 Female 7/8 Female

800W.max 2000W.max 3000W.max

Return loss 87,5 0 -5 -10 -15 dB. -20 -25 -30 -35

89,5

91,5

93,5

95,5

97,5

99,5

101,5

RADIATION PATTERN at mid band.

Horizontal component with pole mounting 100mm diameter at 98 MHz.

103,5

105,5

108Mz.

Model ACP 2x2 - ACP 2x2 7/8 TWO CIRCULAR POLARIZATION ANTENNA SYSTEM FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas. Electrical Data Model Impedance Frequency Range Gain Polarization VSWR Combinations Max Power

System composition ACP2x2 - 2 ACP2, 2 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 2 coaxial cables RG213 with N-type end connectors. ACP2x2 7/8 - 2 ACP2 7/8, 2 ways wide-band splitter (Input EIA 1+5/8" flange and EIA 7/8" flange output) and 2 coaxial cables 1/2" with EIA 7/8" end flange.

ACP 2x2 - ACP 2x2 7/8 50 ohm. 87.5 - 108 MHz. 0 dB (referred to a half wave dipole) Vertical and horizontal < 1.35 Collinear system 1000 W (ACP2x2) 3000 W (ACP2x2 7/8)

Mechanical Data Wind Load Max Wind Velocity Weight Antenna height

97kg. 150km/h 200km/h. 46 kg. 3400 mm.

Horizontal pattern (F=98 MHz)

Vertical Diagram 100

0

80

-3.1

60

Er (%)

-6

40

-10.5

20

-20

0 0,0

4,0

8,0

12,0

16,0 Dep (°)

20,0

24,0

28,0

32,0

36,0

Er (dB)

Model ACP 2x4 - ACP 2x4 7/8 FOUR CIRCULAR POLARIZATION ANTENNA SYSTEM FM BAND 87.5-108 MHz. - BAND II - B.BAND ANTENNA - CIRCULAR POLARIZATION - STAINLESS STEEL INOX AISI 304 - PRESSURIZATION ON REQUEST - LIGHTNING PROTECTION ALL METAL PARTS DC GROUNDED This antenna offer the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas.

Electrical Data Model Impedance Frequency Range Gain Polarization VSWR Combinations Max Power

System composition ACP2x4 - 4 ACP2, 4 ways wide-band splitter (Input EIA 7/8" flange and N-type connectors output) and 4 coaxial cables RG213 with N-type end connectors. ACP2x2 7/8 - 4 ACP2 7/8, 4 ways wide-band splitter (Input EIA 1+5/8" flange and EIA 7/8" flange output) and 4 coaxial cables 1/2" with EIA 7/8" end flange.

ACP 2x4 - ACP 2x4 7/8 50 ohm. 87.5 - 108 MHz. 3 dB (referred to a half wave dipole) Vertical and horizontal < 1.35 Collinear system 3000 W (ACP2x4) 5000 W (ACP2x4 7/8)

Mechanical Data Wind Load Max Wind Velocity Weight Antenna height

Horizontal Pattern (F= 98 MHz)

194kg. 150km/h 200km/h. 87 kg. 8600 mm.

Vertical Diagram 0

100

80

-3.1

60 Er (%)

-6

40

-10.5

20

-20

0 0,0

4,0

8,0

12,0

16,0

20,0

Dep (°)

24,0

28,0

32,0

36,0

Er (dB)