6 763.422.2661 763.422.2588
NETWORKING CABLE PATHWAY / BONDING AND GROUNDING
Intro Page
CHAPTER 6 CABLE RUNWAY SYSTEM/ BONDING AND GROUNDING FEATURED PRODUCTS
176
NETWORKING
LADDER RACK SYSTEMS From ceiling-mounted to under-floor floor configurations, Ladder Rack Systems ems route cables through unused space ace on the floor, wall or ceiling while keeping cables accessible for easy maintenance. A full line of components and accessories facilitates a flexible, easy-toinstall cable runway system.
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CHAPTER CONTENTS
Intro Page
CABLE PATHWAY AND ACCESSORIES Ladder Rack System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 Ladder Rack Straight Sections (cULus Classified) . . . . . . . . . . . . . . . . .179 Ladder Rack Curved Sections (cULus Classified) . . . . . . . . . . . . . . . . . .179 90-Degree Horizontal E-Bend Section (cULus Classified) . . . . . . . . . . . .179 Butt-Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Adjustable Butt-Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . .179 Junction Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . . . . . . . .180 Adjustable Junction Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . .180 Retaining Post Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 L-Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Radius Drop Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Stringer Radius Drop Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Ceiling Support Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Foot Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Rack-to-Runway Mounting Plate Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Vertical Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Triangle Support Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Modular Triangle Support Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . .182 Wall Angle Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Corner Support Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 End Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Runway Termination Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Movable Cross Member . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Rack-to-Wall Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Runway Elevation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Runway Overhead 12-in. Stack Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Runway Center Support Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Spool Divider Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Insulated Ground Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 J-Bolt Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 CABLERACK™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
QUICK TRAY PRO™
BONDING AND GROUNDING With a variety of bonding and grounding accessories available—including lugs, taps and bar kits—components meet open frame rack and cabinet bonding and grounding requirements for telecommunication room and data center applications.
EQUIPMENT PROTECTION
Straight Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 Splice Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Splice Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Splice Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Trapeze Hanging Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 C-Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 Center Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 L-Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 Reinforced Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 Divider Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 Side-Action Bolt Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 Vertical Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 Wall-Termination Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 Polymer Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
BONDING AND GROUNDING ACCESSORIES Bonding and Grounding Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 Lay-In Lug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 Compression Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 Heavy-Duty C-Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 Telecommunications Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Vertical Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Horizontal Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Insulated Ground Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 Rack Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
177
6
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES CABLE PATHWAY AND ACCESSORIES
LADDER RACK SYSTEM
INDUSTRY STANDARDS
APPLICATION
Painted and Plated Straight Sections:
The Ladder Rack System conveniently routes cables via a modular pathway through unused space on the floor, wall or ceiling while keeping cables accessible for easy maintenance. A variety of straight and curved sections are highly adaptable and can accommodate virtually any room layout.
UL/cULus Classified for Equipment Grounding and Load; File No. E236414 Curved Sections and Splice Kits:
UL/cULus Classified for Equipment Grounding; File No. E236414 cULus Bonding & Grounding • Classified as suitable for an equipment ground conductor - CSA C22.2 No. 126.1-02 Section 5.2.8 Load Destruction Test • Two grounding jumper kits required per each splice kit on painted ladder rack sections cULus Load Testing • Load capacity per 10 support lengths is 369.2 lb.; safety factor of 1.5X - CSA C22.2 No. 126.1-02 Section 5.1 Electrical Continuity Test
6
FEATURES • • • •
Section cross members welded on 9-in. (229-mm) centers Accessory adjustable cross members Butt-splice kits and junction-splice kits Each model is boxed or bagged
SPECIFICATIONS • • •
Straight and curved sections made of 1-1/2-in. steel Sections available in 6-, 12-, 18- and 24-in. (152-, 305-, 457- and 610-mm) widths Steel connecting and mounting hardware
FINISH Available in three finishes: • ANSI 61 gray polyester powder paint • RAL 9005 black polyester powder paint • Plated
ACCESSORIES Touch-up Paint
178
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
LADDER RACK STRAIGHT SECTIONS (CULUS CLASSIFIED) Supports cable on straight runs. Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) 16 gauge tubular steel with a painted or plated finish. Nominal installed length is 10 ft. (3.05 m). Each section is 9 ft. 11-1/2 in. (3.03 m) long with cross members welded at 9-in. (229-mm) intervals. BULLETIN: DCR
Catalog Number LSS6G LSS6BLK LSS6GZ LSS12G LSS12BLK LSS12GZ LSS18G LSS18BLK LSS18GZ LSS24BLK
AxB in. 6.00 x 120.00 6.00 x 120.00 6.00 x 120.00 12.00 x 120.00 12.00 x 120.00 12.00 x 120.00 18.00 x 120.00 18.00 x 120.00 18.00 x 120.00 24.00 x 120.00
AxB mm 152 x 3048 152 x 3048 152 x 3048 305 x 3048 305 x 3048 305 x 3048 457 x 3048 457 x 3048 457 x 3048 610 x 3048
Finish Gray Black Plated Gray Black Plated Gray Black Plated Black
W (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00
W (mm) 152 152 152 305 305 305 457 457 457 610
LADDER RACK CURVED SECTIONS (CULUS CLASSIFIED) Provide a vertical change in direction. They are made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) tubular steel with a painted or plated finish. Cross members are welded on the inside (inside bends) or outside (outside bends) of the section. Connect to straight section with butt-splice kits. Designed for category 5e, 6, 6A and fiber optic cable. BULLETIN: DCR
Catalog Number LIB6G LIB6BLK LIB6GZ LIB12G LIB12BLK LIB12GZ LIB18G LIB18BLK LIB18GZ LIB24BLK LOB6G LOB6BLK LOB6GZ LOB12G LOB12BLK LOB12GZ LOB18G LOB18BLK LOB18GZ LOB24BLK
Finish Gray Black Plated Gray Black Plated Gray Black Plated Black Gray Black Plated Gray Black Plated Gray Black Plated Black
Vertical Bend Type Inside Inside Inside Inside Inside Inside Inside Inside Inside Inside Outside Outside Outside Outside Outside Outside Outside Outside Outside Outside
W (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00
W (mm) 152 152 152 305 305 305 457 457 457 610 152 152 152 305 305 305 457 457 457 610
90-DEGREE HORIZONTAL E-BEND SECTION (CULUS CLASSIFIED) Provide a 90-degree horizontal change in cable runway direction. Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) tubular steel with a painted or plated finish. Connect to straight sections with butt-splice kits. Designed for category 5e, 6, 6A and fiber optic cable.
Catalog Number L90HB12G L90HB12BLK L90HB12GZ L90HB18G L90HB18BLK L90HB18GZ L90HB24BLK
Finish Gray Black Plated Gray Black Plated Black
W (in.) 12.00 12.00 12.00 18.00 18.00 18.00 24.00
W (mm) 305 305 305 457 457 457 610
BULLETIN: DCR
BUTT-SPLICE KIT (CULUS CLASSIFIED) Joins straight ladder rack sections, inside and outside bends, and 90-degree horizontal e-bends. Each kit connects one section to another. Includes mounting hardware.
Catalog Number LBSKG LBSKB LBSK
Finish Gray Black Plated
Kit Qty. 2 2 2
Catalog Number LABSKG LABSKB LABSK
Finish Gray Black Plated
Kit Qty. 2 2 2
BULLETIN: DCR
ADJUSTABLE BUTT-SPLICE KIT (CULUS CLASSIFIED) Provides a change in up-and-down direction of the cable runway. It can be adjusted to any angle from 0 to 90 degrees. Made of steel with a painted or plated finish. Each kit connects one ladder rack section to another. Includes mounting hardware.
6
BULLETIN: DCR
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
179
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
JUNCTION SPLICE KIT (CULUS CLASSIFIED) Connects two straight ladder rack sections at a 90-degree angle. Made of steel with a painted or plated finish. Each kit connects one section to another. Includes mounting hardware.
Catalog Number LJSKG LJSKB LJSK
Finish Gray Black Plated
Kit Qty. 2 2 2
Catalog Number LAJSKG LAJSKB LAJSK
Finish Gray Black Plated
Kit Qty. 2 2 2
Catalog Number LRP LRPB
Finish Plated Black
Kit Qty. 1 1
Catalog Number LLBG LLBB LLB
Finish Gray Black Plated
Kit Qty. 1 1 1
BULLETIN: DCR
ADJUSTABLE JUNCTION SPLICE KIT (CULUS CLASSIFIED) Connects two ladder rack sections at any junction angle. Made of steel with a painted or plated finish. Each kit connects one section to another. Includes mounting hardware. BULLETIN: DCR
RETAINING POST KIT Provides extra ladder rack capacity. Mounts onto rack side stringer. Post is unthreaded 1/2-in. tube. Kit components are plated steel. Includes post cap and mounting hardware. BULLETIN: DCR
L-BRACKET KIT The L-Bracket Kit supports power or other cables that need to be separated from the main cable run. Made of steel with a painted or plated finish. Mounts onto ladder rack stringer. Includes mounting hardware. BULLETIN: DCR
RADIUS DROP KIT Mounts over ladder rack cross member to provide bending radius when dropping cable. Includes cable spools to separate cable and all mounting hardware. Made of extruded aluminum. BULLETIN: DCR
6
Catalog Number LRD6G LRD6BLK LRD6GZ LRD12G LRD12BLK LRD12GZ LRD18G LRD18BLK LRD18GZ LRD24BLK
Finish Gray Black Aluminum Gray Black Aluminum Gray Black Aluminum Black
Cable Runway Width (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00
Cable Runway Width(mm) 152 152 152 305 305 305 457 457 457 610
Kit Qty. 1 1 1 1 1 1 1 1 1 1
STRINGER RADIUS DROP KIT Mounts over ladder rack stringer to provide bending radius when dropping cable. Includes cable spools to separate cable and all mounting hardware. Made of extruded aluminum.
Catalog Number LSRDG LSRDBLK LSRDGZ
Finish Gray Black Aluminum
Kit Qty. 1 1 1
BULLETIN: DCR
180
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
CEILING SUPPORT KIT Supports ladder rack from ceiling. Components available separately or as a kit. Six-foot-long, 5/8-in. diameter rod is threaded for easy tension adjustment. Made of plated steel. Requires surface mounting hardware (not included). BULLETIN: DCR
LRWSBK
Catalog Number LCK
Finish Plated
LTR LRWBK
Plated Plated
LRWBKB
Black
LCBK
Plated
LCBKB
Black
LRWSBK
Plated
LRWSBKB
Black
Description Kit includes one each: - LTR Threaded Rod - 5/8-in. nuts (4) - LRWBK Rack Runway Bracket - LCBK Ceiling Bracket 5/8-in. x 6-ft. Threaded Rod Rack Runway Brackets (10) 5/8-in. nuts (20) Rack Runway Brackets (10) 5/8-in. nuts (20) Ceiling Brackets (10) 5/8-in nuts (20) Ceiling Brackets (10) 5/8-in nuts (20) Rack-to-Runway Brackets (10) Slip-On 5/8 in. nuts (2) Rack-to-Runway Brackets (10) Slip-On 5/8 in. nuts (2)
Kit Qty. 1
1 1 1 1 1 1 1
FOOT KIT Secures ladder rack to floor, ceiling or wall. Made of steel with a painted or plated finish. One kit secures one ladder rack section. Requires surface mounting hardware (not included).
Finish Gray Black Plated
Catalog Number LFKG LFKB LFK
Kit Qty. 2 2 2
BULLETIN: DCR
RACK-TO-RUNWAY MOUNTING PLATE KIT Secures ladder rack to the top of equipment racks. Made of steel with a painted or plated finish. The plate is designed for mounting either parallel or perpendicular to the rack. Includes mounting hardware. BULLETIN: DCR
Catalog Number LRRMPG LRRMPBLK LRRMPGZ LRRMPG18 LRRMPBLK18 LRRMPGZ18 LRRMPBLK24
Fits Ladder Width 6, 12 6, 12 6, 12 12, 18 12, 18 12, 18 18, 24
Finish Gray Black Plated Gray Black Plated Black
Kit Qty. 1 1 1 1 1 1 1
VERTICAL WALL BRACKET Secures ladder rack section to wall or other flat surface. Made of steel with a painted or plated finish. Requires surface mounting hardware (not included).
Catalog Number LVWBG LVWBB LVWB
Finish Gray Black Plated
Kit Qty. 2 2 2
BULLETIN: DCR
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
181
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
TRIANGLE SUPPORT BRACKET KIT Supports ladder rack from wall. Bracket is made of steel with painted or plated finish. Brackets have predrilled mounting holes for two sizes of ladder rack. Includes one J-Bolt Kit. BULLETIN: DCR
Catalog Number LTSB12G LTSB12BLK LTSB12GZ LTSB18G LTSB18BLK LTSB18GZ LTSB24BLK
A in. 0.00 0.00 0.00 0.00 0.00 0.00 24.00
A mm
610
Finish Gray Black Plated Gray Black Plated Black
Fits Cable Runway 6, 12 6, 12 6, 12 12, 18 12, 18 12, 18 12, 18, 24
Kit Qty. 1 1 1 1 1 1 1
MODULAR TRIANGLE SUPPORT BRACKET KIT Secures and supports ladder rack to wall. Design features three bracket support arms that easily attach to each other with quick-release pins and fold down to ease assembly. Each model accomodates two ladder rack widths. Kit includes one modular bracket assembly, three quick-release pins and two J-bolts with washers and nuts. Bracket made of painted steel with plated hardware.
Fits Cable Runway 6, 12 12, 18 18, 24
Finish Black Black Black
Catalog Number LMTSB12B LMTSB18B LMTSB24B
Kit Qty. 1 1 1
BULLETIN: DCR
WALL ANGLE SUPPORT Supports ladder rack from wall or other flat surface. Made of 2-in. x 2-in. 10 gauge steel angle with painted or plated finish. Includes two J-bolts, nuts and screws.
Catalog Number LWASK6G
Finish Gray
LWASK6BLK
Black
LWASK6GZ
Plated
LWASK12G
Gray
LWASK12BLK
Black
LWASK12GZ
Plated
LWASK18G
Gray
LWASK18BLK
Black
LWASK18GZ
Plated
LWASK24BLK
Black
BULLETIN: DCR
L in./mm 8.00 203 8.00 203 8.00 203 14.00 356 14.00 356 14.00 356 20.00 508 20.00 508 20.00 508 26.00 660
R in./mm 6.00 152 6.00 152 6.00 152 12.00 305 12.00 305 12.00 305 18.00 457 18.00 457 18.00 457 24.00 610
S in./mm 6.38 162 6.38 162 6.38 162 12.38 314 12.38 314 12.38 314 18.38 467 18.38 467 18.38 467 24.38 619
Kit Qty. 1 1 1 1 1 1 1 1 1 1
CORNER SUPPORT BRACKET KIT Provides additional support for 90-degree ladder rack junction. Made of steel with a painted or plated finish.
Catalog Number LCSKG LCSKB LCSK
Finish Gray Black Plated
Kit Qty. 1 1 1
BULLETIN: DCR
6
182
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
END CAP KIT Provides protective covering for ends of ladder rack. Made of black vinyl.
Catalog Number LEC
Kit Qty. 2
BULLETIN: DCR
RUNWAY TERMINATION KIT Provides a solid termination when the last section of ladder rack ends away from a wall. Made of steel with a painted or plated finish. BULLETIN: DCR
Fits Cable Runway 12 12 12 18 18 18 24
Finish Gray Black Plated Gray Black Plated Black
Catalog Number LRTK12G LRTK12B LRTK12 LRTK18G LRTK18B LRTK18 LRTK24B
Kit Qty. 1 1 1 1 1 1 1
MOVABLE CROSS MEMBER Supports cable at drop locations between welded cross members. Made of steel with a painted or plated finish. For maximum cable protection, use with radius drop kit. Includes hardware for secure mounting to ladder rack stringers. BULLETIN: DCR
Catalog Number LMCM12G LMCM12BLK LMCM12GZ LMCM18G LMCM18BLK LMCM18GZ LMCM24BLK
Finish Gray Black Plated Gray Black Plated Black
W (in.) 12.00 12.00 12.00 18.00 18.00 18.00 24.00
Kit Qty. 1 1 1 1 1 1 1
W (mm) 305 305 305 457 457 457 610
RACK-TO-WALL KIT Includes one section of straight ladder rack and everything needed to fasten the ladder section to an open frame rack and to the wall. Ladder is 54-in. (1372-mm) long by 12-in. (305-mm) wide. All parts have a black painted finish. Order open frame rack separately.
Catalog Number E45RUBKIT
Description Each Rack-to-Wall Kit includes one: - LSS12BLK [54-in. (1372-mm) long] Ladder Rack* - LWASK12BLK Wall Angle Support with j-bolts - LRRMPBLK Rack-to-Runway Mounting Kit - LEC End Cap Kit
* Ladder Rack is cULus Classified
BULLETIN: DOFR2
RUNWAY ELEVATION KIT 6WUDLJKW 6HFWLRQ
$
5DFNWR5XQZD\ 0RXQWLQJ3ODWH.LW 2UGHU6HSDUDWHO\
2SHQ )UDPH 5DFN
EQUIPMENT PROTECTION
Elevates ladder rack 3 or 6 in. (76 or 152 mm) above rack-toladder mounting plate. Use on any width ladder rack. Kit includes two brackets and all mounting hardware. Made of heavy plated steel.
Catalog Number LEK3 LEK3B LEK6 LEK6B LEK12 LEK12B
A (in.) 3.00 3.00 6.00 6.00 12.00 12.00
A (mm) 76 76 152 152 305 305
Finish Plated Black Plated Black Plated Black
Kit Qty. 1 1 1 1 1 1
6
BULLETIN: DCR
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
183
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
RUNWAY OVERHEAD 12-IN. STACK KIT Allows stacking any width of ladder rack runways 12 in. (305 mm) above each other. Each kit contains two complete stacking brackets with all necessary hardware. Use one kit at least every 5 ft. (1.5 m). Brackets and fasteners made of plated steel.
Catalog Number LST12 LST12B
Finish Plated Black
Includes 2 brackets and hardware 2 brackets and hardware
Kit Qty. 1 1
BULLETIN: DCR
RUNWAY CENTER SUPPORT KIT Threaded rod and bracket supports center of ladder rack from ceiling. Kit includes heavy-duty ladder rack cross member, 5/8-in. threaded rod, two J-bolts, protected sleeve and 5/8-in. nut. Use one kit at least every 5 ft. (1.5 m). Made of plated steel.
Catalog Number LCSK6 LCSK12 LCSK18 LCSK24
Finish Plated Plated Plated Plated
Catalog Number LCRDSK
Finish Black plastic spool; plated steel bracket
Fits Cable Runway 6 12 18 24
Kit Qty. 1 1 1 1
BULLETIN: DCR
SPOOL DIVIDER KIT Spools separate cables to improve cable management and to control cable-to-cable distances. Spool and bracket attach to ladder rack cross member and can be located anywhere across the width. Kit includes ten 4-in.-tall spools, brackets and all necessary hardware. Spool made of black plastic and bracket made of plated steel.
Kit Includes 10 spools, 10 brackets and mounting hardware
BULLETIN: DCR
INSULATED GROUND JUMPER KIT Fastens across splices to provide a secure ground between sections of ladder rack. Made of #6 AWG x 7 strand wire with green THW insulation and two-hole compression lugs mounted on each end. Includes fasteners.
Catalog Number DGJ
Conductor Type #6-7 Stranded
L in./mm 12.00 305
cULus requires 2 kits per splice on all painted ladder sections
BULLETIN: DBG
6
184
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
J-BOLT KIT Connects ladder rack to top of cabinet or to auxiliary support channel. Each kit includes two J-bolts and makes one support connection. Kit components are plated steel. Includes mounting hardware. Each kit contains: (2) J-Bolts, 5/16 in. (2) Nuts, 5/16 in. (2) Washers, 5/16 in. (2) Lock Washers, 5/16 in. (1) Plate BULLETIN: DCR
J (in.) 3.5 5.00 6.00 7.00
Catalog Number LJBK LJBK5 LJBK6 LJBK7
J (mm) 89 127 152 178
Finish Plated Plated Plated Plated
-
CABLERACK™
%
&
$ CABLERACK™ is used for ladder or basket tray mounting and securing 19-inch rack equipment for Data centers, Telecommunication rooms and other locations. The fixed, open frame rack allows suspending 19-inch rack equipment from Ladder Rack or Basket Tray. The rack has universal tapped holes per industry standards to accommodate typical applications. These open frame racks are ideal for high-density cabling applications which require above-the-cabinet mounting of equipment, and provide maximum access to cables and equipment. CABLERACK is ideal for Data Center applications, expanding equipment to above-the-cabinet while providing increased equipment and cable densities.
Standard Product Catalog Number E19T6U
AxBxC in./mm 12.44 x 20.16 x 11.50 316 x 512 x 292
Rack Units 6
Cable Bend Radius Accessory ECMBA4
BULLETIN: DOFRW
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
185
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
QUICK TRAY PRO™
STRAIGHT SECTION
INDUSTRY STANDARDS
APPLICATION
UL Classified for suitability as equipment ground conductor only. NFPA 70, National Electrical Code, Article 392: Cable Trays; provides UL Classification and labels IEC 61537, Cable Tray Systems and Cable Ladder systems for Cable Management NEMA VE 1, Metal Cable Tray Systems, for materials, sizes and configurations
The QUICK TRAY PRO™ cable tray routes cables through unused space while keeping them accessible for easy maintenance. Combine components to configure a system that meets application requirements.
SPECIFICATIONS • •
Made of high-strength 5-mm or higher gauge steel wire T-weld top wire
FINISH Pre-galvanized steel or black powder-coated finish. BULLETIN: DQT
Standard Product Catalog Number QTP2X4 QTP2X4BLK QTP2X6 QTP2X6BLK QTP2X8 QTP2X8BLK QTP2X12 QTP2X12BLK QTP2X16 QTP2X16BLK QTP2X18
6
QTP2X18BLK QTP2X20 QTP2X20BLK QTP2X22 QTP2X22BLK QTP2X24
186
AxBxC in./mm 2.00 x 4.00 x 120.00 51 x 102 x 3048 2.00 x 4.00 x 120.00 51 x 102 x 3048 2.00 x 6.00 x 120.00 51 x 152 x 3048 2.00 x 6.00 x 120.00 51 x 152 x 3048 2.00 x 8.00 x 120.00 51 x 203 x 3048 2.00 x 8.00 x 120.00 51 x 203 x 3048 2.00 x 12.00 x 120.00 51 x 305 x 3048 2.00 x 12.00 x 120.00 51 x 305 x 3048 2.00 x 16.00 x 120.00 51 x 406 x 3048 2.00 x 16.00 x 120.00 51 x 406 x 3048 2.00 x 18.00 x 120.00 51 x 457 x 3048 2.00 x 18.00 x 120.00 51 x 457 x 3048 2.00 x 20.00 x 120.00 51 x 508 x 3048 2.00 x 20.00 x 120.00 51 x 508 x 3048 2.00 x 22.00 x 120.00 51 x 559 x 3048 2.00 x 22.00 x 120.00 51 x 559 x 3048 2.00 x 24.00 x 120.00 51 x 610 x 3048
NETWORKING
Description 2 x 4-in. Straight Section
Finish Pre-galvanized
Load per 6-ft. span lbs./ft. 43
2 x 4-in. Straight Section
Black
43
108
99
2
2 x 6-in. Straight Section
Pre-galvanized
50
163
149
4
2 x 6-in. Straight Section
Black
50
163
149
4
2 x 8-in. Straight Section
Pre-galvanized
52
218
200
4
2 x 8-in. Straight Section
Black
52
218
200
4
2 x 12-in. Straight Section
Pre-galvanized
58
326
298
4
2 x 12-in. Straight Section
Black
58
326
298
4
2 x 16-in. Straight Section
Pre-galvanized
70
439
402
4
2 x 16-in. Straight Section
Black
70
439
402
4
2 x 18-in. Straight Section
Pre-galvanized
70
495
452
4
2 x 18-in. Straight Section
Black
70
495
452
4
2 x 20-in. Straight Section
Pre-galvanized
73
550
503
5
2 x 20-in. Straight Section
Black
73
550
503
5
2 x 22-in. Straight Section
Pre-galvanized
73
600
554
5
2 x 22-in. Straight Section
Black
73
600
554
5
2 x 24-in. Straight Section
Pre-galvanized
75
660
604
5
SUBJECT TO CHANGE WITHOUT NOTICE
Cat6 Fill Rate* .19-in. dia. cable 108
Cat6A Fill Rate* .23-in. dia. cable 99
Splice Quantity 2
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
Catalog Number QTP2X24BLK QTP4X4 QTP4X4BLK QTP4X6 QTP4X6BLK QTP4X8 QTP4X8BLK QTP4X12 QTP4X12BLK QTP4X16 QTP4X16BLK QTP4X18 QTP4X18BLK QTP4X20 QTP4X20BLK QTP4X22 QTP4X22BLK QTP4X24 QTP4X24BLK QTP6X8 QTP6X8BLK QTP6X12 QTP6X12BLK QTP6X16 QTP6X16BLK QTP6X18 QTP6X18BLK QTP6X20 QTP6X20BLK QTP6X22 QTP6X22BLK QTP6X24 QTP6X24BLK
AxBxC in./mm 2.00 x 24.00 x 120.00 51 x 610 x 3048 4.00 x 4.00 x 120.00 102 x 102 x 3048 4.00 x 4.00 x 120.00 102 x 102 x 3048 4.00 x 6.00 x 120.00 102 x 152 x 3048 4.00 x 6.00 x 120.00 102 x 152 x 3048 4.00 x 8.00 x 120.00 102 x 203 x 3048 4.00 x 8.00 x 120.00 102 x 203 x 3048 4.00 x 12.00 x 120.00 102 x 305 x 3048 4.00 x 12.00 x 120.00 102 x 305 x 3048 4.00 x 16.00 x 120.00 102 x 406 x 3048 4.00 x 16.00 x 120.00 102 x 406 x 3048 4.00 x 18.00 x 120.00 102 x 457 x 3048 4.00 x 18.00 x 120.00 102 x 457 x 3048 4.00 x 20.00 x 120.00 102 x 508 x 3048 4.00 x 20.00 x 120.00 102 x 508 x 3048 4.00 x 22.00 x 120.00 102 x 559 x 3048 4.00 x 22.00 x 120.00 102 x 559 x 3048 4.00 x 24.00 x 120.00 102 x 610 x 3048 4.00 x 24.00 x 120.00 102 x 610 x 3048 6.00 x 8.00 x 120.00 152 x 203 x 3048 6.00 x 8.00 x 120.00 152 x 203 x 3048 6.00 x 12.00 x 120.00 152 x 305 x 3048 6.00 x 12.00 x 120.00 152 x 305 x 3048 6.00 x 16.00 x 120.00 152 x 406 x 3048 6.00 x 16.00 x 120.00 152 x 406 x 3048 6.00 x 18.00 x 120.00 152 x 457 x 3048 6.00 x 18.00 x 120.00 152 x 457 x 3048 6.00 x 20.00 x 120.00 152 x 508 x 3048 6.00 x 20.00 x 120.00 152 x 508 x 3048 6.00 x 22.00 x 120.00 152 x 559 x 3048 6.00 x 22.00 x 120.00 152 x 559 x 3048 6.00 x 24.00 x 120.00 152 x 610 x 3048 6.00 x 24.00 x 120.00 152 x 610 x 3048
Description 2 x 24-in. Straight Section
Finish Black
Load per 6-ft. span lbs./ft. 75
4 x 4-in. Straight Section
Pre-galvanized
45
205
188
4
4 x 4-in. Straight Section
Black
45
205
188
4
4 x 6-in. Straight Section
Pre-galvanized
49
310
285
5
4 x 6-in. Straight Section
Black
49
310
285
5
4 x 8-in. Straight Section
Pre-galvanized
78
416
380
6
4 x 8-in. Straight Section
Black
78
416
380
6
4 x 12-in. Straight Section
Pre-galvanized
78
621
568
6
4 x 12-in. Straight Section
Black
78
621
568
6
4 x 16-in. Straight Section
Pre-galvanized
108
837
765
7
4 x 16-in. Straight Section
Black
108
837
765
7
4 x 18-in. Straight Section
Pre-galvanized
116
942
862
7
4 x 18-in. Straight Section
Black
116
942
862
7
4 x 20-in. Straight Section
Pre-galvanized
116
1047
958
7
4 x 20-in. Straight Section
Black
116
1047
958
7
4 x 22-in. Straight Section
Pre-galvanized
116
1152
1054
8
4 x 22-in. Straight Section
Black
116
1152
1054
8
4 x 24-in. Straight Section
Pre-galvanized
116
1257
1150
8
4 x 24-in. Straight Section
Black
116
1257
1150
8
6 x 8-in. Straight Section
Pre-galvanized
116
623
570
6
6 x 8-in. Straight Section
Black
116
623
570
6
6 x 12-in. Straight Section
Pre-galvanized
123
931
852
6
6 x 12-in. Straight Section
Black
123
931
852
6
6 x 16-in. Straight Section
Pre-galvanized
123
1255
1148
7
6 x 16-in. Straight Section
Black
123
1255
1148
7
6 x 18-in. Straight Section
Pre-galvanized
127
1413
1292
7
6 x 18-in. Straight Section
Black
127
1413
1292
7
6 x 20-in. Straight Section
Pre-galvanized
127
1571
1437
7
6 x 20-in. Straight Section
Black
127
1571
1437
7
6 x 22-in. Straight Section
Pre-galvanized
127
1728
1580
8
6 x 22-in. Straight Section
Black
127
1728
1580
8
6 x 24-in. Straight Section
Pre-galvanized
150
1886
1726
8
6 x 24-in. Straight Section
Black
150
1886
1726
8
Cat6 Fill Rate* .19-in. dia. cable 660
Cat6A Fill Rate* .23-in. dia. cable 604
Splice Quantity 5
6
* Based on 50% fill rate.
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
187
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
SPLICE KIT Splice Kits are used for bolting turns, bends and tees; connecting QUICK TRAY PRO™ sections; and fastening splice bars. Kit includes three-piece staked bolt, washer and nut.
AxBxC in./mm 2.00 x 4.00 x 2.00 51 x 102 x 51 2.00 x 4.00 x 2.00 51 x 102 x 51
Catalog Number QTPBNWK QTPBNWKBLK
Description Splice Kit (Zinc)
Pkg. Qty. 50
Splice Kit (Black)
50
BULLETIN: DQT
SPLICE WASHER QUICK TRAY PRO Splice Washers are used with QTPBNWK/ QTPBNWKBLK Splice Kits for bolting turns, bends, and tees; connecting tray sections; and fastening splice bars.
Catalog Number QTPSSW3 QTPSSW3BLK
AxBxC in./mm 4.00 x 4.00 x 8.00 102 x 102 x 203 4.00 x 4.00 x 8.00 102 x 102 x 203
Description Splice Washer
Finish Pre-galvanized
Pkg. Qty. 50
Splice Washer
Black
50
BULLETIN: DQT
SPLICE BARS QUICK TRAY PRO Splice Bars provide extra support and stability to tray sides when connecting tray sections with splice washers. Universal bars can be cut to fit with bolt cutters and bent for use in tees and elbows. Made of plated steel. Requires QTPSSW3/ QTPSSW3BLK Splice Washers and QTBNWK/QTPBNWKBLK Splice Kits to fasten to side of tray. BULLETIN: DQT
Catalog Number QTPUS10 QTPUS10BLK QTP90TKIT QTP90TKITBLK
AxBxC in./mm 4.00 x 13.00 x 4.00 102 x 330 x 102 4.00 x 13.00 x 4.00 102 x 330 x 102 1.00 x 5.00 x 5.00 25 x 127 x 127 1.00 x 5.00 x 5.00 25 x 127 x 127
Description Splice Bar, 10 in. Universal (Zinc)
Pkg. Qty. 50
Splice Bar, 10 in. Universal (Black)
50
Includes: (2) 90º bends; (8) washers, (8) nuts, (8) bolts (Zinc)
1
Includes: (2) 90º bends; (8) washers, (8) nuts, (8) bolts (Black)
1
6
188
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
TRAPEZE HANGING CLIP For trapeze hung QUICK TRAY PRO™ installations. Use with 1/4- or 3/8-in. threaded rod; obtain locally. Poly grommet retains tray in slot-unsnaps to detach one side of tray for loading cables. Corrosion-resistant pre-galvanized finish. BULLETIN: DQT
Catalog Number QTPTH QTPTHBLK
AxBxC in./mm 3.00 x 6.00 x 14.00 76 x 152 x 356 3.00 x 6.00 x 14.00 76 x 152 x 356
Description Trapeze Hanging Clips, Pre-galvanized
Pkg. Qty. 50
Trapeze Hanging Clips, Black
50
C-BRACKET For QUICK TRAY PRO installations under ceiling or overhangs. Use with tray widths up to 12 in. (305 mm). To secure tray to bracket, use one QTPSSW3/QTPSSW3BLK Splice Washer and one QTPBNWK/ QTPBNWKBLK Splice Kit on sizes up to 8 in. (203 mm); use two on 12-in. (305-mm) trays. Can be stacked for multi-level tray installations. Corrosion resistant plated finish. BULLETIN: DQT
Catalog Number QTPCB4 QTPCB4BLK QTPCB8 QTPCB8BLK QTPCB12 QTPCB12BLK
AxBxC in./mm 8.00 x 1.00 x 4.00 203 x 25 x 102 8.00 x 1.00 x 4.00 203 x 25 x 102 8.00 x 1.00 x 8.00 203 x 25 x 203 8.00 x 1.00 x 8.00 203 x 25 x 203 8.00 x 1.00 x 12.00 203 x 25 x 305 8.00 x 1.00 x 12.00 203 x 25 x 305
Description C-Bracket
Finish Pre-galvanized
C-Bracket
Black
C-Bracket
Pre-galvanized
C-Bracket
Black
C-Bracket
Pre-galvanized
C-Bracket
Black
Tray Width in./mm 4 102 4 102 8 203 8 203 12 305 12 305
CENTER HANGERS Use with up to 1/2-in. threaded rod (obtain locally). Only one rod needed to suspend tray. Snap-on attachment holds QUICK TRAY PRO cable tray secure without nuts and bolts. For use with 4- to 24-in. (102- to 610-mm) tray widths. Can be used for multiple-level installations; 1/2-in. threaded rod recommended. Corrosionresistant plated finish. BULLETIN: DQT
Catalog Number QTPCH4 QTPCH4BLK QTPCH12 QTPCH12BLK QTPCH24 QTPCH24BLK
EQUIPMENT PROTECTION
AxBxC in./mm 7.50 x 4.00 x 1.00 191 x 102 x 25 7.50 x 4.00 x 1.00 191 x 102 x 25 7.50 x 12.00 x 1.00 191 x 305 x 25 7.50 x 12.00 x 1.00 191 x 305 x 25 7.50 x 24.00 x 1.00 191 x 610 x 25 7.50 x 24.00 x 1.00 191 x 610 x 25
Description Center Hanger
Finish Pre-galvanized
Center Hanger
Black
Center Hanger
Pre-galvanized
Center Hanger
Black
Center Hanger
Pre-galvanized
Center Hanger
Black
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
Tray Width in./mm 4 102 4 102 12 305 12 305 24 610 24 610
6
NETWORKING
189
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
L-BRACKETS L-Brackets mount directly to wall for overhead mounting. Corrosion-resistant plated finish. Fasten QUICK TRAY PRO™ to bracket with one QTPSSW3/QTPSSW3BLK Splice Washer and one QTPBNWK/QTPBNWKBLK Splice Kit on sizes up to 8 in. (203 mm); use two on 12-in. (305-mm) trays. BULLETIN: DQT
Catalog Number QTPLB4 QTPLB4BLK QTPLB8 QTPLB8BLK QTPLB12 QTPLB12BLK
AxBxC in./mm 6.00 x 1.00 x 4.00 152 x 25 x 102 6.00 x 1.00 x 4.00 152 x 25 x 102 6.00 x 1.00 x 8.00 152 x 25 x 203 6.00 x 1.00 x 8.00 152 x 25 x 203 6.00 x 1.00 x 12.00 152 x 25 x 305 6.00 x 1.00 x 12.00 152 x 25 x 305
Description 4-in. L-Bracket
Finish Pre-galvanized
4-in. L-Bracket
Black
8-in. L-Bracket
Pre-galvanized
8-in. L-Bracket
Black
12-in. L-Bracket
Pre-galvanized
12-in. L-Bracket
Black
REINFORCED WALL BRACKET For heavy-duty QUICK TRAY PRO applications. Mounts on 1-5/8-in. wide metal channel. To secure tray to bracket, use one QTPSSW3/ QTPSSW3BLK Splice Washer and one QTPBNWK/QTPBNWKBLK Splice Kit on sizes up to 8 in. (203 mm); use two on 12-in. (305-mm) and wider trays. Made of plated steel for corrosion resistance. BULLETIN: DQT
Catalog Number QTPRWB4 QTPRWB4BLK QTPRWB6 QTPRWB6BLK QTPRWB8 QTPRWB8BLK QTPRWB12 QTPRWB12BLK QTPRWB16 QTPRWB16BLK QTPRWB18 QTPRWB18BLK
6
QTPRWB20 QTPRWB20BLK QTPRWB24 QTPRWB24BLK
190
NETWORKING
AxBxC in./mm 3.00 x 1.00 x 4.00 76 x 25 x 102 3.00 x 1.00 x 4.00 76 x 25 x 102 3.00 x 1.00 x 6.00 76 x 25 x 152 3.00 x 1.00 x 6.00 76 x 25 x 152 4.00 x 1.00 x 8.00 102 x 25 x 203 4.00 x 1.00 x 8.00 102 x 25 x 203 6.00 x 1.00 x 12.00 152 x 25 x 305 6.00 x 1.00 x 12.00 152 x 25 x 305 9.00 x 1.00 x 16.00 229 x 25 x 406 9.00 x 1.00 x 16.00 229 x 25 x 406 3.00 x 8.00 x 3.00 76 x 203 x 76 3.00 x 8.00 x 3.00 76 x 203 x 76 9.00 x 1.00 x 20.00 229 x 25 x 508 9.00 x 1.00 x 20.00 229 x 25 x 508 9.00 x 1.00 x 24.00 229 x 25 x 610 9.00 x 1.00 x 24.00 229 x 25 x 610
Description Reinforced Wall Bracket
Finish Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
SUBJECT TO CHANGE WITHOUT NOTICE
Width in./mm 4 102 4 102 6 152 6 152 8 203 8 203 12 305 12 305 16 406 16 406 18 457 18 457 20 508 20 508 24 610 24 610
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
DIVIDER STRIP For wire separation within a single QUICK TRAY PRO™ cable tray. 5-ft. (1.5-m) long strips are available in 2-, 4- and and 6-in. (51-, 102- and 152-mm) heights. To secure divider strips to tray, use QTPSSW3/QTPSSW3BLK Splice Washer and QTPBNWK/ QTPBNWKBLK Splice Kit for each strip. BULLETIN: DQT
Catalog Number QTPDS2 QTPDS2BLK QTPDS4 QTPDS4BLK QTPDS6 QTPDS6BLK
AxBxC in./mm 2.00 x 1.00 x 60.00 51 x 25 x 1524 2.00 x 1.00 x 60.00 51 x 25 x 1524 4.00 x 1.00 x 60.00 102 x 25 x 1524 4.00 x 1.00 x 60.00 102 x 25 x 1524 6.00 x 1.00 x 60.00 152 x 25 x 1524 6.00 x 1.00 x 60.00 152 x 25 x 1524
Descripton Divider Strip
Finish Pre-galvanized
Divider Strip
Black
Divider Strip
Pre-galvanized
Divider Strip
Black
Divider Strip
Pre-galvanized
Divider Strip
Black
Tray Height in./mm 2 51 2 51 4 102 4 102 6 152 6 152
SIDE-ACTION BOLT CUTTER The QUICK TRAY PRO Side-Action Bolt Cutter insures a flush cut and helps create a protective coating for the new cut.
Catalog Number QTPBC
AxBxC in./mm 12.00 x 1.00 x 0.50 305 x 25 x 13
Description Side Action Bolt Cutter
BULLETIN: DQT
VERTICAL DOWN The QUICK TRAY PRO Vertical Down protects cables when exiting and entering tray. Built-in hold down method for side mount. Attached with 1/4 in. hardware for center mount. BULLETIN: DQT
Catalog Number QTPVD QTPVDBLK
AxBxC in./mm 1.00 x 8.00 x 11.00 25 x 203 x 279 1.00 x 8.00 x 11.00 25 x 203 x 279
Description Vertical Down
Finish Pre-galvanized
Vertical Down
Black
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
191
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
WALL-TERMINATION BRACKET Fastens the end of QUICK TRAY PRO™ cable tray to a wall. Attach to tray with QTPSSW3/QTPSSW3BLK Splice Washers and QTPBNWK/ QTPBNWKBLK Splice Kits.
Catalog Number QTPWTB QTPWTBBLK
AxBxC in./mm 3.00 x 12.00 x 3.00 76 x 305 x 76 3.00 x 12.00 x 3.00 76 x 305 x 76
Description Wall-Termination Bracket, 12 in. (305 mm)
Finish Pre-galvanized
Wall-Termination Bracket, 12 in. (305 mm)
Black
BULLETIN: DQT
POLYMER INSERT Polymer inserts provide continuous support for the cables when used as a tray liner. This flame retardant polymer material is prescored at the factory to fit in all standard width QUICK TRAY PRO cable trays. Easy to cut and sold in 40-foot (12 meters) roll. BULLETIN: DQT
Catalog Number QTP4INST
Description 4 x 40-foot roll (102 x 12,197-mm) Polymer Insert
QTP6INST
6 x 40-foot roll (152 x 12,197-mm) Polymer Insert
QTP8INST
8 x 40-foot roll (203 x 12,197-mm) Polymer Insert
QTP12INST
12 x 40-foot roll (305 x 12,197-mm) Polymer Insert
QTP16INST
16 x 40-foot roll (406 x 12,197-mm) Polymer Insert
QTP18INST
18 x 40-foot roll (457 x 12,197-mm) Polymer Insert
QTP20INST
20 x 40-foot roll (508 x 12,197-mm) Polymer Insert
QTP24INST
24 x 40-foot roll (610 x 12,197-mm) Polymer Insert
Tray Width in./mm 4 102 6 152 8 203 12 305 16 406 18 457 20 508 24 610
6
192
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
Notes
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
193
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
BONDING AND GROUNDING ACCESSORIES
BONDING AND GROUNDING OVERVIEW
INDUSTRY STANDARDS
FEATURES
Ground Bar Kits:
•
UL 467 Listed cUL Listed per CSA C22.2 No. 41 File No. E319377
• •
Components specially designed to efficiently facilitate reliable connections Enable system to meet equipment manufacturer grounding requirements Components fit EIA 310-D-rated open frame racks
APPLICATION
6
These components meet open frame rack and cabinet bonding and grounding requirements for telecommunication room and data center applications.
194
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
Dual-rated, UL486B listed lay-in lug bonds end of cable securely to rack. Made of electroplated 6061-T6 aluminum. Requires 3/16-in. hex key (not included).
LAY-IN LUG
BULLETIN: DBG Catalog Number DGLG
For Cable Size Range #14 AWG to 2/0
Catalog Number DGCL61 DGCL62 DGCL21 DGCL22 DGCL201 DGCL402
Cable Size (#) 6 6 2 2 2/0 4/0
COMPRESSION LUGS
Size (in.) 1.75 x 1.50
On-Center Dimension Between Holes .625 1.00 .625 1.00 1.00 1.00
Size (mm) 44 x 38
Required Screw Size 1/4 3/8 1/4 3/8 3/8 3/8
Color Code Blue Blue Brown Brown Black Purple
Pkg. Qty. 10
Pkg. Qty. 10 10 10 10 10 10
Compression lugs terminate copper or tinned-copper conductors for connection to busbars, cabinets, racks, and cable runway. Color-coded by conductor size. Made of electroplated, tinned copper. Require two screws (not included). BULLETIN: DBG
HEAVY-DUTY C-TAPS
C-Taps splice two stranded or solid connectors together. Made of copper. Require a crimping tool (not included) to correctly tighten C-Taps around connectors. BULLETIN: DBG Catalog Number DGT1 DGT2
Conductor Run #2 stranded or solid #2 stranded or solid
Conductor Tap #4 stranded, #8 solid #2 stranded or solid
Pkg. Qty. 10 10
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
195
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
TELECOMMUNICATIONS GROUND BAR KITS
2-inch Wide Bar
4-inch Wide Bar
Provide a convenient central location for connecting grounds from telecommunications equipment, computers, and other data center equipment. Made of copper. Kits include ground bar with two mounting brackets, an assortment of connectors, and a tube of antioxidant. BULLETIN: DBG
Standard Product Catalog Number DGTB212 DGTB216 DGTB412 DGTB420
Bar Size in./mm 2.00 x 12.00 x .25 51 x 305 x 6 2.00 x 16.00 x .25 51 x 406 x 6 4.00 x 12.00 x .25 102 x 305 x 6 4.00 x 20.00 x .25 102 x 508 x 6
No. of 5/16-in. Hole Sets 6
No. of 7/16-in. Hole Sets 3
8
3
12
6
24
6
Compression Lugs Included with Ground Bar Kits
Catalog Number DGTB212 DGTB216 DGTB412 DGTB420
VERTICAL GROUND BAR KITS
#6 Wire Size (DGCL61) 6 lugs 6 lugs 6 lugs 6 lugs
#2 Wire Size (DGCL22) 3 lugs 3 lugs 3 lugs 3 lugs
#2/0 Wire Size (DGCL201) 1 lug 1 lug 1 lug 1 lug
#4/0 Wire Size (DGCL402) 0 0 1 lug 1 lug
Mount vertically on rack, providing a convenient place to connect equipment grounds. Made of electrolytic tough-pitch 110 copper alloy. Kits include ground bar with compression lug for #2 wire, connection hardware, and mounting hardware. BULLETIN: DBG Catalog Number DG36 DG72
HORIZONTAL GROUND BAR KITS
Bar Size (in.) 36.00 x .625 x .25 72.00 x .625 x .25
Bar Size (mm) 914 x 16 x 6 1829 x 16 x 6
Mount horizontally on rack, providing a convenient place to connect equipment grounds. Made of electrolytic tough-pitch 110 copper alloy. Kits include ground bar with mounting hardware, eight #6-32 x 14 machine screws, and eight #6 ring terminals. BULLETIN: DBG Catalog Number DG19 DG23
Bar Size (in.) 1.00 x 19.25 x .25 1.00 x 23.25 x .25
Bar Size (mm) 25 x 489 x 6 25 x 591 x 6
6
196
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
INSULATED GROUND JUMPER KIT
Fastens across splices to provide a secure ground between sections of ladder rack. Made of #6 AWG x 7 strand wire with green THW insulation and two-hole compression lugs mounted on each end. Includes fasteners. BULLETIN: DBG Catalog Number DGJ
Conductor Type #6-7 Stranded
L (in.) 12.00
L (mm) 305
cULus requires 2 kits per splice on all painted ladder sections
RACK JUMPER KIT
Grounds rack or cabinet to common bonding network under floor or overhead. Made of #6 AWG x 7 strand wire with green THW insulation and two-hole compression lug mounted on one end. Includes fasteners. BULLETIN: DBG Catalog Number DGRJ
Conductor Type #6-7 stranded
Length (ft.) 9
Length (m) 2.7
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
197