Replacement Gas Caps

3910043

1982-92 Fuel Door Lock

3910044 ST10506

G6954

1969-02 Replacement Gas Caps 3910045

3910189

1967-68 Gas Caps OER® reproduction gas caps for 1967-68 Camaro models. Standard gas caps come painted in a factory primer and are ready to be painted to your desired color. SS 350, SS and RS caps feature the correct semi-flat black trim with polished chrome exterior and include correct filler neck to rear body panel attachment cable. Note: The 1968 Camaro was not originally equipped with an “SS-350” gas cap. However, this cap will fit on all 1968 models.

3910043 3910044 3910045 3910189

1967-68 1967-68 1967-68 1967-68

standard ................... SS 350 ..................... SS ............................ RS ............................

21.99 44.99 44.99 44.99

ea ea ea ea

1967-68 Bow Tie Locking Gas Cap Reproduction 1967-68 optional Bow Tie locking gas cap. Each cap is finished in a high quality polished chrome exterior with the correct semi flat back trim. The center includes the Chevrolet Bow Tie emblem in polished chrome. Also includes two pre-coded keys. K25000 1967-68 .................................. 29.99 ea

1969-70 OE-Style Vented Gas Cap This reproduction GM cap is meticulously reverseengineered from the OEM cap. Features correct shape, color, and markings. The quality and materials are manufactured to exact specification for the demanding restorer. High quality representation of the original vented gas cap. 3931449 1969-70 w/o EEC .................. 34.99 ea

L

Fuel & Exhaust

A9700202

A9700204

1967-68 Camaro Billet Gas Caps These beautiful billet gas caps are CNC machined to perfection. Available with either with a machined or polished finish. Your choice of SS, RS, or plain without logo. Plain Cap A9700201 1967-68 machined finish....... 94.99 ea A9700202 1967-68 polished finish......... 109.99 ea RS Engraved Cap A9700203 1967-68 machined finish....... 94.99 ea A9700204 1967-68 polished finish......... 109.99 ea SS Engraved Cap A9700205 1967-68 machined finish....... 94.99 ea A9700206 1967-68 polished finish......... 109.99 ea

528

Gas Caps

These service replacement fuel caps may differ from the original in appearance but will fit and function as original. A low cost replacement that is designed to operate correctly. Original GM Replacement Caps G6954 1969-70 w/o E.E.C. ............... 27.99 ea G6956 1980-81 ................................. 9.99 ea G6957 1982-97 ................................. 9.99 ea G4676 1998 231, w/FI, vin K ...... 21.99 ea G4676 1998 350, w/FI, vin G ...... 21.99 ea G4677 1999-00 231, w/FI, vin K ...... 22.99 ea G4677 1999 350 ........................... 22.99 ea G5490 2001-02 ................................. 15.99 ea Stant Replacement Caps Non-Locking Gas Caps ST10646 1969-70 exc. 1970 Cal. models . 6.99 ea ST10806 1970 Cal. models only...... 4.99 ea ST10807 1971-74 ................................ 4.99 ea ST10817 1975-81 non vented ............... 5.99 ea ST10819 1975-81 vented ...................... 9.99 ea ST10822 1982-97 non vented ............... 5.99 ea ST10823 1982-97 vented ...................... 11.99 ea ST10836 1999-02 ................................. 11.99 ea Locking Gas Caps ST10484 1967-68 vented ........................ 12.99 ea ST10492 1969-70 exc. 1970 Calif. models . 11.99 ea ST10583 1970 Calif. models only ..... 14.99 ea ST10571 1971-74 ................................... 14.99 ea ST10591 1975-81 non vented ................. 12.99 ea ST10501 1975-81 vented ........................ 19.99 ea ST10594 1982-97 ................................... 14.99 ea ST10506 1999-02 ................................... 12.99 ea

1967-68 Billet Fuel Filler Assemblies These billet fuel filler assemblies will add a custom look to any 1967-68 Camaro. Made from machined aluminum 81000032 they offer OEM quality sealing and no modification installation. Assemblies include billet filler neck, custom billet locking cap with two keys, all necessary hoses, clamps and fasteners. Assemblies are available for direct fit and universal applications in both clear and black anodized finishes. An optional vent kit is also available for applications where venting is required. Note: Universal assemblies do not include hoses or clamps. No further discounts apply.

Direct Fit 81000032 1967-68 clear anodized ......... 249.99 81000033 1967-68 black anodized ........ 259.99 Universal Fit 81000034 clear anodized ....................... 209.99 81000036 black anodized ...................... 219.99 81000038 vent kit .................................. 9.99

Protect your gas cap and fuel supply with this “easy to install” key-type fuel door lock. This lock can be installed on all 1982-92 Camaro models and can be used in addition to your factory installed remote fuel door lock! TK1029A 1982-92 chrome face .......... 24.99 ea TK1029B 1982-92 black face ............. 21.99 ea

344330

1969-77 Rear Fuel Tank Filler Doors Correct replacement bracket and hinge assembly which installs on the rear and covers the gas cap. The license plate attaches to the bracket. 344330 1969 reproduction ............ 21.99 ea B1019 1970-77 reproduction ............ 28.99 ea

5970789

1978-81 Fuel Door with Hinge Reproduction flush-mount fuel door for 1978-81 Camaro, Z28 and 1979-81 Berlinetta models. These exact reproductions feature the correct grain, appropriate holes to attach the rear emblem. The Berlinetta fuel door is properly finished with a chrome and black accent bar as shown. 5969507 1978-81 standard & Z28 ........ 82.99 ea 5970789 1979-81 Berlinetta ................. 96.99 ea

1982-02 Fuel Doors Fuel tank filler door makes replacing the worn out or missing original easily. 20638651 1982-92 OER® repro. ........... 59.99 ea G4575 1998-02 original GM............ 96.99 ea

ea ea ea ea ea

3937590

G6663

10257216

1969-98 Fuel Door Rubber Bumpers

1993-02 Fuel Pocket Original GM fuel pocket for all 1993-02 Camaro models. This is a commonly damaged part due to excessive use. G4576 1993-02 .................................... 24.99 ea

These fuel door bumpers attach directly to the rear body panel and eliminates contact between the fuel filler door and the body. 3937590 1969-77 OER® original style . 4.99 pr G6663 1985-87 12mm, 2 required ..... 2.99 ea 10257216 1993-98 on fuel filler pocket .. 1.29 ea

Toll Free Order Line 800.854.1280

Replacement Fuel Tanks

s steel Now available in stainles

• 1 Gas Tank - 1967-69 • 1 Tank to Filler Neck Hose - 1967-68 • 1 Fuel Tank Upper Neck - 1967-68 • 1 Filler Neck Sleeve - 1967-68 • 1 Anti Squeak Kit - 1967-69 • 2 Fuel Tank Straps - 1967-69 • 1 Strap Mounting Bolt Kit - 1967-69 • 1 Gas Tank Lock Ring - 1967-69 • 1 Fuel Tank O-Ring Gasket - 1967-69

R301

1967-69 Camaro Fuel Tank Kits Replace all the necessary components for your 1967-69 Camaro with Classic Industries® fuel tank kits. Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Save over 10% off normal individual pricing! Note: Shipped double oversize. No further discounts apply.

R301 R321 R302 R322

1967-68 1967-68 1969 1969

OS2

zinc coating .................................................... stainless steel ................................................. zinc coating .................................................... stainless steel .................................................

221.99 362.99 158.99 293.99

kit kit kit kit

These reproduction fuel tanks are manufactured to factory specifications from stamped steel and are available in a variety of finishes to suit your build. Basic zinc coated steel tanks are a great value, offering strong corrosion resistance at a reasonable price. Ni-terne steel tanks provide an OE-quality appearance for discerning restorers. For show-quality builds, stainless steel tanks offer superior corrosion resistance with a spectacular polished finish.

Zinc-Coated Fuel Tanks Quality Replacement Tank Standard Corrosion Resistance Manufactured to Factory Specifications

Ni-Terne Steel Fuel Tanks OE-Quality Replacement Tank Exceptional Corrosion Resistance Manufactured to Factory Specifications

Stainless Steel Fuel Tanks 14258

1967-73 Stainless Steel Fuel Injection Fuel Tanks Stainless steel gas tanks are a direct replacement for the OE tanks. Each tank is hand formed from 304 grade Stainless Steel and TIG welded. All tanks feature a unique baffle system. running front to rear, side to side, and around the fuel pickups to eliminate fuel starvation during acceleration and hard braking. All fittings and mounting flanges are CNC machined from 304 Stainless steel stock to a thickness of 3/8" to ensure a proper seal. All tanks include an installed fuel pump, stainless mounting straps and hardware. All tanks have a brushed finish for easy up-keep. Important: Fuel sending unit is not included with tank. Note: Shipped double oversize. No further discounts apply.

14257 14258 14259 14260

1967-68 1969 1970-73 1967-73

Show-Quality Replacement Tank Superior Corrosion Resistance Stainless Steel Polished Finish Manufactured to Factory Specifications

1967-97 Camaro Fuel Tanks

OS2

fuel tank ....................................................... 1079.99 ea fuel tank ....................................................... 1119.99 ea fuel tank ....................................................... 1059.99 ea 0-90 ohm fuel sending unit .......................... 69.99 ea

Correct reproduction fuel tanks for 1967-97 Camaro models. These reproduction gas tanks are manufactured to exact specifications and are available in zinc coated steel, ni-terne steel or stainless steel. 1967-68 1969 1970 1970-73 1974-78 1979-81 1982-87 1982-92 1993-97

FT1000B FT1001B FT1002B FT1003B FT1004B FT1005B FT1006B FT1007B FT1008B

1967-68 1969 1970 1970-73 1974-78 1979-81 1982-87 1982-92 1993-97

FT1000C FT1001C FT1002C FT1003C FT1004C FT1005C

1967-68 1969 1970 1970-73 1974-78 1979-81

www.classicindustries.com

Zinc-Coated Steel w/o fuel filler neck .......................................... 129.99 attached fuel filler neck................................... 129.99 w/o EEC.......................................................... 139.99 with EEC......................................................... 139.99 all models........................................................ 129.99 all models........................................................ 129.99 with fuel pump on engine ............................... 139.99 with fuel pump in tank .................................... 139.99 all models........................................................ 139.99 Ni-Terne Coated Steel w/o fuel filler neck .......................................... 169.99 attached fuel filler neck................................... 169.99 w/o EEC.......................................................... 199.99 with EEC......................................................... 199.99 all models........................................................ 199.99 all models........................................................ 199.99 with fuel pump on engine ............................... 239.99 with fuel pump in tank .................................... 239.99 all models........................................................ 239.99 Stainless Steel w/o fuel filler neck .......................................... 269.99 attached fuel filler neck................................... 269.99 w/o EEC.......................................................... 299.99 with EEC......................................................... 299.99 all models........................................................ 299.99 all models........................................................ 299.99

Fuel Tanks

ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea

529

Fuel & Exhaust L

FT1000A FT1001A FT1002A FT1003A FT1004A FT1005A FT1006A FT1007A FT1008A A9718658

1967-73 Aeromotive Fuel Tanks These tanks bring modern fuel system technology to your classic muscle car. By placing the fuel pump inside the tank, hot fuel issues such as vapor-lock and cavitation are eliminated. We have all heard the stories of hot rodders being stuck on the side of the road with a fuel system or an engine that stumbles under braking, acceleration or hard cornering. These issues are related to fuel pump location, plumbing and lack of proper baffling. You can now have an in-tank fuel pump that is properly vented and submerged in fuel at all times. These new reproduction steel tanks feature a durable silver powder coat finish. In addition, they feature an internally baffled system with an in-tank performance fuel pump capable of supporting up to 1000 hp. Deep sump tanks include new fuel tank straps. Choose the bypass regulator that best serves your vehicle application. A9718657 1967-68 stock capacity, 18 gallon................................. 704.99 ea A9718658 1969 stock capacity, 18 gallon................................. 669.99 ea A9718328 1970-73 1" deeper than OEM, 21 1/2 gallon ................ 719.99 ea

OS2

Note: Shipped double oversize.

Fuel Tank Components FT1100A

Universal Fuel Tank Anti-Squeak Felt

FT1102A

Universal Gas Tank Anti-Squeak inserts. These felts insert between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. Felts measure 36" long x 1-3/4" wide and are flat with no edges. Highly recommended when replacing your gas tank or mounting straps. UK915 universal fit ............................. 12.99 pr

1967-68 Fuel Neck Sleeve to Floor Clamp Reproduction of the original 1967-68 fuel neck sleeve clamp used to hold the sleeve to the trunk floor. 7707773 1967-68 ................................... 6.99 ea

FT1104A

FT1101B

C2056

1967-68 Tank to Filler Neck Hose FT1103B

1967-02 Fuel Tank Mounting Straps Reproduction fuel tank mounting straps for 1967-02 models produced using heavy duty preformed steel for an original appearance or long lasting stainless steel for corrosion resistance. OE Material FT1100A 1967-69 .................................. 24.99 pr FT1101A 1970-73 .................................. 24.99 pr FT1102A 1974-75 .................................. 29.99 pr FT1103A 1976-81 .................................. 29.99 pr FT1104A 1982-02 .................................. 29.99 pr Stainless Steel FT1100B 1967-69 .................................. 39.99 pr FT1101B 1970-73 .................................. 39.99 pr FT1102B 1974-75 .................................. 39.99 pr FT1103B 1976-81 .................................. 39.99 pr FT1104B 1982-02 .................................. 39.99 pr

1967-69 Fuel Tank Strap Mounting Bolt Set It’s easy to replace your fuel tank straps with fuel tank strap carriage bolts, nuts and washers. This set is recommended when replacing fuel tank straps. K561 1967-69 10 piece kit .............. 5.99 set

C2057

1967-81 Fuel Tank Mounting Braces These correct reproduction fuel tank mounting braces are just what you need to properly and securely mount your fuel tank. Each is constructed from original gauge steel and stamped to fit as original. EDP coated for corrosion resistance. Gas tank straps will attach to these braces and securely hold the gas tank in place. EDP Coated C3480 1967-68 LH or RH (2 req.) .. 44.99 ea C2056 1969 RH ......................... 53.99 ea C2057 1969 LH ......................... 53.99 ea C2480 1970-73 4 piece set .............. 129.99 set 153251 1974-81 4 piece set .............. 129.99 set Weld Thru Coated C2480W 1970-73 4 piece set .............. 159.99 set

Seals inlet filler neck to tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Each hose is produced with correct high quality neoprene and will last much longer than other hoses of inferior quality materials. K630 1967-68 ................................... 8.99 ea

1967-81 Fuel Sender Harness This is the correct power feed harness which activates the fuel tank float sending unit located in the gas tank. We recommend replacing this harness when installing a new gas tank sending unit to ensure an accurate fuel gauge reading CA71184 1967-68 ............................... CA97607 1969 ............................... CA01600 1970-71 ............................... CA21772 1972-73 ............................... CA36272 1974-77 from 11/30/1973 .... CA36269 1978-81 ...............................

CA71184

14.99 14.99 14.99 14.99 14.99 19.99

ea ea ea ea ea ea

Fuel Hose Pinch Clamp

1967-68 Fuel Tank Upper Neck Steel neck unit that runs from the gas cap down to the filler neck hose unit. Gas cap fits directly to outer portion of neck. K963 1967-68 reproduction .......... 39.99 ea

Reproduction style green pinch clamp for 3/8" gas hose. These clamps are found on the hose connecting the fuel tank float to the main fuel line leading to the engine. K0050 .................................................. 1.19 ea

L

Fuel & Exhaust

Fuel Line Vapor Return Hose Line Clamp Reproduction style red pinch clamp for 1/4" gas hose. These clamps are commonly found on the fuel vapor return line connecting the fuel tank float to the fuel pump vapor return line. K0052 ..................................................

1967-68 Gas Tank Filler Neck Sleeve 1967-69 Fuel Tank Anti-Squeak Set Highest quality reproduction on the market! Includes precision die cut 1/2" sponge neoprene tank to floor cushion and 2 strap to tank inserts. Each sponge is inserted between the gas tank and the mounting straps or body. These sponges will eliminate any tank movement which may occur. Highly recommended when replacing your gas tank or mounting straps. K915 1967-69 ................................... 21.99 set

530

Correct reproduction gas tank filler neck sleeve helps keep the gas tank neck from corroding as it passes through the trunk to the gas tank. The rubber sheath covers the gas tank filler neck tube which extends from the rear body tail panel to the trunk floor on its way to the gas tank. Highly recommended when replacing the gas tank neck or the gas tank assembly. Manufactured with correct molded rubber including predrilled holes for screws. 7707772 1967-68 ............................... 21.99 ea

Fuel Tank Straps . Fuel Necks

1.19 ea

1968-70 Fuel Tank Vent Valve Reproduction plastic gas tank vent valve that mounts on the frame rail. One vapor line comes off of gas tank and goes to this valve. Originally, valve had cotton in it from the factory; this is a replacement and does not come with it. Put one cotton ball in the valve this will keep dirt from entering the gas tank. 14987 1968-70 ....................................... 30.99 ea

Toll Free Order Line 800.854.1280

Fuel Tank Components

6428844

1967-69 Fuel Tank Sender Lock Ring Tool FT5030 25000309

1967-02 Fuel Sender Lock Ring and Gasket

1967-81 Fuel Tank Sending Units Reproduction or Original GM fuel tank sending units for 1967-81 models. With 5/16" Fuel Lines OER® Reproduction 6428069 1967 230, 250................ 49.99 ea 6428069 1967 V8 w/2 bbl............ 49.99 ea 6428844 1968-69 6 cylinder ............. 54.99 ea With 3/8" Fuel Lines Note: *With 1/4" return line.

OER® Reproduction 6428068 1967 6428845 1968 6428845 1969 6428845 1969 6428845 1969 6428322* 1969 6428800 1970-73 153158* 1970-73 6428800 1970-73 153158* 1970-73 153248 1974-75 25000309 1976-81 25000308 1976-81 Original GM G6970 1968 G6970 1969 G6970 1969 G6970 1969

V8 w/4 bbl............ V8......................... V8 w/2 bbl............ 396 w/HP.............. 302 Z/28 ............... 350, 396 w/o HP... 307, 350................ 307, 350................ 396........................ 396........................ V8......................... with 1 line ............ with 2 lines ...........

49.99 49.99 49.99 49.99 49.99 49.99 49.99 49.99 49.99 49.99 54.99 54.99 59.99

ea ea ea ea ea ea ea ea ea ea ea ea ea

V8......................... 170.99 V8 w/2 bbl............ 170.99 396 w/HP.............. 170.99 302 Z/28 ............... 170.99

ea ea ea ea

Install the sending unit on your vehicle with a new reproduction sending unit lock ring and gasket set. Lock ring is manufactured from steel with zinc coating. Each set includes the lock ring and rubber o-ring gasket. Lock Ring and Gasket Sets FT5031 1967-69 ................................... 4.99 set FT5030 1970 w/o EEC .................... 11.99 set FT5030 1970-73 with EEC ................... 11.99 set FT5031 1974-81 ................................... 4.99 set FT5032 1982-87 fuel pump on engine.. 14.99 set FT5032 1982-92 fuel pump in tank ...... 14.99 set FT5035 1993-97 ................................... 11.99 set Lock Ring Only 3774937 1967-69 OER® reproduction ... 2.99 ea G7001 1970-73 GM ............................ 5.99 ea 3774937 1974-81 OER® reproduction ... 2.99 ea G4691 1999-02 GM ............................ 4.99 ea Gasket Only 3825206 1967-69 OER® reproduction ... 2.50 ea G6978 1970-73 GM ............................ 7.99 ea 3825206 1974-81 OER® reproduction ... 2.50 ea G6978 1982-92 GM ............................ 7.99 ea G4692 1993-98 GM ............................ 7.99 ea G4693 1999-02 GM ............................ 6.99 ea

K404

G6980

1967-89 Fuel Tank Pick-Up Tube Filters 1985-92 Fuel Tank Sending Unit After years of use, your fuel sending unit can corrode, its float can flood and it can simply stop working, causing your fuel gauge to read incorrectly or even not at all. This Delco Service Replacement will replace your original in both fit and function though it may differ cosmetically. Fits vehicle models with an in-tank fuel pump. 153249 1985-92 .................................... 74.99 ea

G4681

A8700159

A8700193

A8700164

A8700158 A8700166

1964-81 GM Fuel Hose Stamps These stamps were used to identify hose size and placement. 1/4" hose was used for fuel return hose, 5/16" and 3/8" was used for main fuel lines. A8700160 1964-81 GM 1/4 stamp ....... 12.99 ea A8700161 1964-81 GM 5/16 stamp ..... 12.99 ea A8700162 1964-81 GM 3/8 stamp ....... 12.99 ea This stamp was used by hose supplier SWAN on all rubber fuel hose that connected the main fuel line to the fuel sending unit and fuel pump. A8700159 1967-79 SWAN GAS stamp 14.99 ea This stamp was used to identify fuel hoses and was stamped about every inch. A8700193 1967-79 GAS stamp ............ 12.99 ea These stamps were used to identify emissions hose size and placement. A8700163 1970-81 EVAP 1/4 stamp .... 12.99 ea A8700164 1970-81 EVAP 5/16 stamp .. 12.99 ea A8700165 1970-81 EVAP 3/8 stamp .... 12.99 ea This stamp were used to identify hose on GM vehicles with an in trunk fuel filler neck vapor system. A8700166 1965-70 VAPOR.................. 12.99 ea No authentic restoration is complete without attention to every detail. These inspection stamps were placed on fuel tanks to show they had passed pressure safety testing and quality inspections. Each stamp is aesthetically accurate and includes a bottle of correct red paint. Note: Black ink was occasionally used in place of red ink.

A8700157 1967-72 Inspector 3 stamp... 34.99 ea A8700158 1968-72 20 insp ok stamp .... 34.99 ea

Hose Marking Ink Pad

1985-97 Fuel Tank Sending Units

1967-76 Fuel Sending Unit Float

Original GM fuel tank sending units for 1985-97 models. G6962 1985-92 all models ............ 375.99 ea G13113 1993-95 ............................. 272.99 ea G4681 1996-97 8 cyl..................... 321.99 ea

Is your fuel sending unit not reading correctly? Does your sending unit float have a crack or hole in it? Classic Industries® offers a brass sending unit float that helps send accurate readings to your fuel gauge. 479312 fuel sending unit float ............... 9.99 ea

www.classicindustries.com

A8700161

This pre-inked ink pad is the correct frost white ink for marking hoses. The slow-drying water based ink makes mistakes easy to correct before the ink becomes permanent. A8700167 white ink stamp pad ............ 14.99 ea

Fuel Tank Components

531

Fuel & Exhaust L

Correct replacement fuel tank pick-up tube strainer used to help keep contaminants in the fuel from entering into the fuel lines. This part attaches directly to the fuel tank pick-up tube. OER® Reproduction K404 1967-81 5/16" OEM style . 11.99 ea K405 1967-81 3/8" OEM style ... 11.99 ea Original GM Replacement G6979 1967-81 3/8" replacement . 11.99 ea G6980 1982-83 2.5 F .................... 5.99 ea G6980 1982-85 w/o fuel injection 5.99 ea G6980 1984-85 305 G................... 5.99 ea G6980 1986 without 305 H ..... 5.99 ea G6980 1987 2.8 S, 5.0 F, 5.7-8 5.99 ea G6980 1987 305 H................... 5.99 ea G6980 1988-89 5.0 F, 5.7-8 .......... 5.99 ea

A handy tool used to remove the fuel tank sending unit lock ring on 1967-69 Camaro models. CX4879 1967-69 ................................... 16.99 ea

Fuel Pump Components

G6985

M4513

40669 G6987 M6626

1967-87 Carter Replacement Fuel Pumps High quality new replacement fuel pumps specifically designed for each year and engine size. Some fuel pumps may differ slightly in appearance from original but will fit and function correctly offering years of satisfactory service.

L

Fuel & Exhaust

Note: *Early 1967. **High Output. †Mechanical and electric pump required.

Inline 6 M4503 M4503 M6738 V6 M60086 M6951 M60280 V8 M4513* M4513* M4685 M4685 M4530 M4685 M6624 M6624 M4513 M6101 M6624 M6624 M4685 M6624 M6624 M6624 M6101 M6101 M6101 M4530 M6101 M6624 M6624 M6626 M6624 M6624 M6101 M6624 M4685 M4685 M4685 M6101 M4685 M4685 M6101 M6626 M6626 M6626** M6626 M6626** M6626 M6626†

1967-69 230 ........................... 17.99 ea 1967-74 250-D....................... 17.99 ea 1975-79 250-D....................... 14.99 ea 1980-81 229-K....................... 21.99 ea 1980-81 231-A....................... 15.99 ea 1982-84 173-1 ....................... 29.99 ea 1967 1967 1967-68 1967-69 1968-72 1969 1969 1969 1970 1970 1970-75 1970-75 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1973-76 1976-79 1976-79 1977 1977-80 1977-80 1978-80 1980 1981 1981 1981 1981 1981 1981 1981 1982-83 1982-83 1984 1984-87 1985 1986 1986-87

327, 5/16" outlet ...... 350, 5/16" outlet ...... 350, 3/8" outlet ........ 327, 3/8" outlet ........ 396 ........................... 307, 3/8" outlet ........ 307 ........................... 350 ........................... 307 ........................... 350 w/4 bbl. ............. 350H,K w/2 bbl. ...... 350L,T w/2 bbl. ....... 307F......................... 350H w/Holley ........ 350K w/Holley ........ 350L w/Holley......... 350H w/Rochester ... 350K w/Rochester ... 350L w/Rochester.... 402U ........................ 350H,K,L w/4 bbl.... 305Q,U .................... 305G,H .................... 350L AT w/AC ........ 350L all w/o AC ...... 350L MT w/AC ....... 350L AT w/AC ........ 267J ......................... 267J ......................... 305H all w/o AC...... 305H MT w/AC ...... 305H AT w/AC ........ 350L all w/o AC ...... 350L MT w/AC ....... 350L AT w/AC ........ 305H w/mech pump 305-7 w/mech pump 305G w/mech pump 305H w/mech pump 305G w/mech pump 305G ........................ 305H w/o FI ............

21.99 21.99 12.99 12.99 21.99 12.99 16.99 16.99 21.99 21.99 16.99 16.99 12.99 16.99 16.99 16.99 21.99 21.99 21.99 21.99 21.99 16.99 16.99 17.99 16.99 16.99 21.99 16.99 12.99 12.99 12.99 21.99 12.99 12.99 21.99 17.99 17.99 17.99 17.99 17.99 17.99 17.99

ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea

1967-81 Fuel Pump Push Rod Reproduction fuel pump push rod for all V8 engines. 3704817 1967-81 .................................. 14.99 ea

532

Fuel Pumps

1967-81 Delco Replacement Fuel Pumps Choose from a wide range of fuel pumps specifically designed for each year and engine size. Some fuel pumps may differ slightly in appearance from original but will fit and function correctly offering years of satisfactory service. Note: *Early 1967.

V8 G6987* G6987* G6983 G6983 G6985 G6983 G6988 G6988 G6987 G6989 G6988 G6988 G6983 G6988 G6988 G6988 G6989 G6989 G6989 G6985 G6988 G6989 G6988 G6988 G6988 G6988 G6989 G6988 G6983 G6983 G6983 G6989 G6983 G6983 G6989

1967 1967 1967-68 1967-69 1967-72 1969 1969 1969 1970 1970 1970-75 1970-75 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1971-72 1973-75 1973-76 1976-79 1976-79 1977-80 1977-80 1978-80 1980 1981 1981 1981 1981 1981 1981 1981

327, 5/16" outlet ...... 350, 5/16" outlet ...... 350, 3/8" outlet ........ 327, 3/8" outlet ........ 396 ........................... 307, w/3/8" outlet .... 302 ........................... 350 ........................... 307 ........................... 350 w/4 bbl. ............. 350H,K w/2 bbl. ...... 350L,T w/2 bbl. ....... 307F......................... 350H w/Holley ........ 350K w/Holley ........ 350L w/Holley......... 350H w/Rochester ... 350K w/Rochester ... 350L w/Rochester.... 402U ........................ 350 w/2 bbl. ............. 350H,K,L w/4 bbl.... 305Q,U .................... 305G,H .................... 350L all w/o AC ...... 350L MT w/AC ....... 350L AT w/AC ........ 267J ......................... 267J ......................... 305H all w/o AC...... 305H MT w/AC ...... 305H AT w/AC ........ 350L all w/o AC ...... 350L MT w/AC ....... 350L AT w/AC ........

32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99 32.99

ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea

1967-70 Remanufactured Fuel Pumps These hard-to-find fuel pumps are just what your Camaro needs. Using original housings with the AC logo, factory-correct markings and crimped inlet/outlet base, these are remanufactured with new components and will install and function to factory specifications. 40524 1967 302, 327 .......................... 169.99 ea 40468 1967 396/325hp ....................... 179.99 ea 40470 1967 396/350hp, 396/375hp.... 179.99 ea 40524 1968 302, 327, 350 .................. 169.99 ea 40468 1968 396/325hp (L35)............. 179.99 ea 40470 1968 396pre11/67 .................... 179.99 ea 40568 1968 396aft 11/67.................... 179.99 ea 40669 1969 302, 350 .......................... 189.99 ea 40568 1969 396/325hp, 396/350hp.... 179.99 ea 40727 1969 396/375hp, 427/425hp.... 179.99 ea 40731 1969 427/425hp (ZL1) ............ 419.99 ea 40725 1970 302, 350 .......................... 169.99 ea 40727 1970 396/350hp (L34)............. 179.99 ea

E1721

Performer RPM 110 GPH Fuel Pumps Designed for all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. For gasoline only. Clockable lower housing can be rotated for best inlet/outlet alignment. Note: No further discounts apply.

E1721 E1722

small block ............................. 134.99 ea big block ................................. 134.99 ea

Fuel Pump Pressure Tester 12834

1967-78 Holley Chrome Fuel Pumps Replace your original fuel pump with genuine Holley chrome fuel pumps. Each mechanical fuel pump is triple chrome plated and flows 60 gallons per hour @ 7-1/2 PSI. Includes an adjustable lower housing allowing 360 degree rotation of fuel inlet-outlet fittings for custom installation. Note: No further discounts apply.

12834 12835

1967-78 1967-76

small block ............... 81.99 ea big block ................... 81.99 ea

Tests for fuel line pressure and vacuum leaks. Check for leaky valves, timing, fuel pump, vacuum, pressure and gas line leakage. Easy to read gauge with 3 foot hose and vacuum hose adapter fitting. Gauge measures vacuum from 0 to 28" HG in 1" increments. (0 to 700mm HG in 50mm increments). Measures pressure from 0 to 15 psi in 1/2 psi increments (0-1Kg/cm2 in .1 Kg/cm2 increments). Y20300 .................................................. 27.99 ea

Toll Free Order Line 800.854.1280

Fuel Pump Components 1256637

1967-72 Fuel Pump Mounting Bolts Includes correct small head 3/8" bolts with lock washers. Fits all 8 cylinders. 1256637 1967-72 small block ............ 5.99 pr 1256638 1967-72 big block................ 5.99 pr

FPC6702

1967-87 Fuel Pump to Carburetor Lines G6990

G6993

1967-87 Fuel Pump Mounting Plate

AR43161

Used to mount fuel pumps on 1967-87 Camaro models. Features 1 large slot and 4 mounting attachment holes. For all V8 small block engines. Includes chrome plate to block gasket. Mounting Plate G6990 1967-87 all V8 SB ................. 6.99 ea Paper Type Gasket G6993 1967-87 SB or BB ................. 2.99 ea

Fuel Pump Bolt Sets Make sure that mechanical fuel pumps stay properly aligned by using ARP’s durable black oxide finished chrome moly or rust-proof stainless bolts (both materials are rated at 170,000 psi and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12-point head. Washers are included. Made in the USA. AR13162 black oxide hex head ........ 7.99 set AR13161 black oxide 12-point ......... 7.99 set AR43162 stainless hex head ........ 8.99 set AR43161 stainless 12-point ......... 9.99 set

D141210

Bow Tie Fuel Pump Block Off Plate Covers the hole on engine where fuel pump normally goes when using a tank mounted fuel pump. Available for big blocks and small blocks. Includes non-asbestos gasket. D141210 small block ............................. 9.99 ea D141211 big block ................................ 9.99 ea

C D Flames Bow Tie

E SS

F RS

G 350

H 450

1978-87 Fuel Pump Bolt Sets Normal is so, well, normal. Stand apart with a set of designer hardware for your 1978-87 small-block fuel pump. These bolts, available in either a chrome-plated or polished stainless steel finish, have traditional Chevy logos stamped directly into the head of the bolts. A great choice when the details really count! Note: Must specify logo suffix C-Flames, D-Bow Tie, E-SS, F-RS, G-350, H-454 logo.

Chrome 56460C 1978-87 small block .............. Stainless Steel 56460S 1978-87 small block ..............

9.99 set 4.99 set

These are the original style hex-head bolts for all small block or big block Camaro fuel pumps. Includes a complete set for installation of one fuel pump. AK116A polished chrome .................... 9.99 set AK116B polished stainless ................... 16.99 set

www.classicindustries.com

A8700149

A8700154

Fuel Tank And Muffler Stencils The steel sheets used to produce fuel tanks and mufflers featured manufacturer name and date code markings. These stencils make it possible to correctly mark mufflers and fuel tanks for an accurate restoration. Armco Steel A8700141 1968 fuel tank or muffler ... 19.99 ea A8700142 1969 fuel tank or muffler ... 19.99 ea A8700143 1970 fuel tank or muffler ... 19.99 ea A8700144 1971 fuel tank or muffler ... 19.99 ea A8700145 1972 fuel tank or muffler ... 19.99 ea Pittsburgh Steel A8700146 1968 fuel tank or muffler ... 19.99 ea A8700147 1969 fuel tank or muffler ... 19.99 ea A8700148 1970 fuel tank or muffler ... 19.99 ea A8700149 1971 fuel tank or muffler ... 19.99 ea A8700150 1972 fuel tank or muffler ... 19.99 ea USS Steel A8700151 1967 fuel tank .................... 19.99 ea A8700152 1968 fuel tank .................... 19.99 ea A8700153 1969 fuel tank .................... 19.99 ea A8700154 1970 fuel tank .................... 19.99 ea A8700155 1971 fuel tank .................... 19.99 ea A8700156 1972 fuel tank .................... 19.99 ea

FPC6775

1967-68 Pump to Carb Lines Reproduction fuel pump to carb lines and Y-block for 1967-68 396-375 hp models with Holley 4 bbl. carbs. OEM Material FPC6775 1967-68 8-5/8" on centers ... 49.99 set Stainless Steel FPC6775S 1967-68 8-5/8" on centers ... 59.99 set

Fuel Pumps

533

Fuel & Exhaust L

AK116A

Fuel Pump Bolt Sets

A8700142

These lines are the correct size line with original bends making installation easier. You can choose from the original style material or our upgraded stainless steel material. OEM Material FPC6701 1967 230 6 cyl, 5/16" ....... 17.99 ea FPC6702 1967 327/210 hp, to 4/67 . 17.99 ea FPC6703 1967-68 327/210 hp, from 4/67 17.99 ea FPC67ZZ 1967-68 302 4 bbl. Z28 ......... 49.99 ea FPC6705 1967-68 327/275 hp, 5/16" .... 17.99 ea FPC6707 1967-68 327/275 hp, 3/8" ...... 17.99 ea FPC6705 1967-68 350/295 hp, 5/16" .... 17.99 ea FPC6707 1967-68 350/295 hp, 3/8" ...... 17.99 ea FPC6709 1967-68 396/325 hp, 3/8" ...... 17.99 ea FPC6801 1968-70 250 6 cyl, 5/16" ....... 17.99 ea FPC6902 1969 307, 327 2 bbl, 5/16" 17.99 ea FPC6901 1969 350 2 bbl, 3/8" ......... 17.99 ea FPC6905 1969 350/255 or 300 hp ...... 29.99 set FPC6903 1969 396/325-350 hp, 4 bbl ... 29.99 set FPC6975 1969 396/375 hp, 4 bbl..... 49.99 set FPC69ZZ 1969-72 302, 350 4 bbl. Z28 . 49.99 set FPC69NN 1969-02 SB w/edelbrock carb 17.99 ea FPC7001 1970-72 350/300 hp ............... 17.99 ea FPC7005 1970 BB Q-jet .................. 17.99 ea FPC7203 1971-72 BB Q-jet .................. 29.99 set FPC72ZZ 1972-74 350 Q-jet.................. 17.99 ea FPC7701 1977 250 2 bbl .................. 17.99 ea FPC7801 1978 V-8 2 bbl. ................. 17.99 ea FPC7802 1978 305 Q-jet.................. 17.99 ea FPC8001 1979-81 350 Q-jet.................. 17.99 ea FPC8701 1987 4 bbl. ........................ 17.99 ea Stainless Steel FPC6701S 1967 230 6 cyl, 5/16" ....... 24.99 ea FPC6702S 1967 327/210 hp, to 4/67 . 24.99 ea FPC6703S 1967-68 327/210 hp, from 4/67 24.99 ea FPC67ZZS 1967-68 302 4 bbl. Z28 ......... 59.99 ea FPC6705S 1967-68 327/275 hp, 5/16" .... 24.99 ea FPC6707S 1967-68 327/275 hp, 3/8" ...... 24.99 ea FPC6705S 1967-68 350/295 hp, 5/16" .... 24.99 ea FPC6707S 1967-68 350/295 hp, 3/8" ...... 24.99 ea FPC6709S 1967-68 396/325 hp, 3/8" ...... 24.99 ea FPC6801S 1968-70 250 6 cyl, 5/16" ....... 24.99 ea FPC6902S 1969 307, 327 2 bbl, 5/16" 24.99 ea FPC6901S 1969 350 2 bbl, 3/8" ......... 24.99 ea FPC6905S 1969 350/255 or 300 hp ...... 39.99 set FPC6903S 1969 396/325-350 hp, 4 bbl ... 39.99 set FPC6975S 1969 396/375 hp, 4 bbl..... 59.99 set FPC69ZZS 1969-72 302, 350 4 bbl. Z28 . 59.99 set FPC69NNS 1969-02 SB w/edelbrock carb 24.99 ea FPC7001S 1970-72 350/300 hp ............... 24.99 ea FPC7005S 1970 BB Q-jet .................. 24.99 ea FPC7203S 1971-72 BB Q-jet .................. 39.99 set FPC72ZZS 1972-74 350 Q-jet.................. 24.99 ea FPC7701S 1977 250 2 bbl .................. 24.99 ea FPC7801S 1978 V-8 2 bbl. ................. 24.99 ea FPC7802S 1978 305 Q-jet.................. 24.99 ea FPC8001S 1979-81 350 Q-jet.................. 24.99 ea FPC8701S 1987 4 bbl. ........................ 24.99 ea

Fuel Pump Components

FPC67Y

1967-72 Dual Feed Holley Lines Reproduction of the dual feed fuel lines for Holley dual feed carbs. Includes 2 lines and Y-block. OEM Material FPC67Y 1967-72 9-3/8" on centers ..... 29.99 ea FPC68Y 1967-72 8-5/8" on centers ..... 29.99 ea Stainless Steel FPC67YS 1967-72 9-3/8" on centers ..... 34.99 ea FPC68YS 1967-72 8-5/8” on centers ..... 34.99 ea

1967-69 Fuel Line Support Bracket 1969 Fuel Filter Bracket Reproduction fuel filter bracket for all big block 1969 Camaro models with quadrajet carburetor. Produced from original material electro-plated and galvanized. K0112 1969 .......................................... 14.99 ea

Reproduction fuel line support bracket for all 1967-69 Camaro models. C125381 1967-69 ................................. 14.99 ea

1969-70 Fuel Line Support Bracket G3203

This reproduction bracket was used on mid year 1969 Z-28 Camaro models and 1970 Z-28 (350) Camaro models. It attaches to the rear carburetor stud and loops around the fuel line. Each bracket includes the correct mounting screw. K0115 1969-70 ................................... 38.99 ea

T9407

Excellent reproduction of the OEM style L-78 396 and COPO 9560/9561 427-425 engine fuel line Y-block. This brass fitting mounts to the intake manifold where the two carburetor fuel inlet lines meet. Includes correct mounting bracket for correct installation. YB38B 1969......................................... 39.99 ea

E206

1969 Crossram Fuel Line Set

D65829

Reproduction of the 5-piece fuel line set originally installed by the dealer on models equipped with the rare Crossram option. Y-block not included. E206 1969 OE material ............. 39.99 set E206SS 1969 stainless steel ........... 49.99 set T9212

1969 Big Block Fuel Line Y-Block 1967-80 Single Line Fuel Hose Set Correct replacement fuel hose for all models equipped with 4 bbl. carburetors. Not for models with vapor return line. Includes correct 3/8" hose with 2 mounting clamps. K0061 1967-80 ................................... 4.99 set

1969-74 Double Line Fuel Hose Set Correct replacement fuel hose for all models equipped with 4 bbl. carburetors. For models equipped with vapor return lines. Includes correct 3/8" fuel line and 1/4" vapor return line hose with 4 mounting clamps. K0096 1969-74 .................................. 8.99 set

T9245

1969-96 Replacement Fuel Filters Replace the dirty or clogged fuel filter on your classic vehicle with one of our AC Delco or aftermarket filters. We carry a variety of filters to meet your specific needs. AC Delco D65829 1969-71 for carb fuel inlet ... 1.99 ea GM G3203 1992 5.7L V8 w/TBI ...... 11.99 ea G3203 1993-96 4.3L, 5.0L 5.7L w/TBI .. 11.99 ea G3203 1993-96 7.4L V8 w/TBI ........ 11.99 ea In-Line Fuel Filters - Disposable T9177 chrome 3/8" inlet & outlet . 6.99 ea T9212 chrome 5/16" inlet & outlet 4.99 ea T9245 glass 3/8" inlet & outlet . 9.99 ea T9247 glass 5/16" inlet & outlet 9.99 ea In-Line Fuel Filters - with Bronze Element T9407 chrome 3/8" inlet & outlet . 9.99 ea

1967-68 Big Block Fuel Line Bracket Reproduction fuel line bracket for 1967-68 Camaro models equipped with a big block engine. Attaches to the RH motor mount. KW549 1967-68 RH big block .......... 9.99 ea

L

Fuel & Exhaust

Max Clean Fuel System Cleaner

1969 Z-28 Fuel Hose Set This kit is designed to replace the fuel hoses on 1969 Z-28s. Includes correct 12" forward fuel line hose (near fuel pump) and 5-1/4" rear fuel line hose (near fuel tank) with 4 clamps. K0152 1969 ........................................ 7.99 set

534

Max-Clean targets and cleans deposit build up in the intake system and combustion chamber and is effective on the entire spectrum of engines on the road. Deposit build-up is a natural consequence of fuel combustion, but can have significant effects on the performance and reliability of your engine. Royal Purple's Max-Clean can restore internal engine surfaces, recovering lost fuel economy and performance. RP11722 20oz can ................................. 15.99 ea RP11723 case of 6 - 20 oz cans............. 86.99 cs

Fuel Hoses . Fuel Filters

71560

Inline Fuel Pressure Gauge Set and monitor fuel pressure with these easy-to-use gauges! Simply splice into the existing carburetor line to with the anodized aluminum fuel block and 3/8" nipples. Each gauge measures 1-1/2" in diameter with a 0-15 psi range in 1/2 lb increments. Gauges are available in standard form or liquid filled for better vibration resistance and readability. 71560 standard gauge ........................ 39.99 ea 71564 liquid filled gauge ................... 41.99 ea

Toll Free Order Line 800.854.1280

Fuel Pump Components

G6991

1974-02 Fuel Vapor Charcoal Canister P74050 P74006

S20194

S20192

S88536

1982-02 Electric Fuel Pumps The fit and form of a fuel pump is critical to getting the job done right. Our direct replacement electric fuel pumps feature cutting-edge turbine technology, which makes them quiter, more tolerant of debris, and more efficient. They also exceed manufacturer’s tolerances for the ethanol found in today’s fuel blends. Buy with confidence, these fuel pumps are backed by a manufacturer’s 12 month/12,000 mile warranty for defects a workmanship.

Original GM or replacement fuel vapor charcoal canister used to help cut down or eliminate fuel vapor emissions. Mounts near firewall on LH side of engine compartment. 6 Cylinder G4272 1993-97 all - GM .................. 100.99 ea G4273 1998 all - GM .................. 114.99 ea VC122 1998 all - repro ................ 109.99 ea G4274 1999-02 all - GM .................. 114.99 ea VC123 1999-02 all - repro ................ 155.99 ea 8 Cylinder G6991 1974-77 350 .......................... 66.99 ea G6991 1976-77 305 .......................... 66.99 ea G6997 1980 305H CA. - GM...... 128.99 ea VC105 1980 305H CA. - repro.... 129.99 ea G11692 1988-92 all - GM .................. 119.99 ea G4272 1993-97 all - GM .................. 100.99 ea G4273 1998 all - GM .................. 114.99 ea VC122 1998 all - repro ................ 109.99 ea G4274 1999-02 all - GM .................. 114.99 ea VC123 1999-02 all - repro ................ 155.99 ea

Note: New strainers must be used on electric pumps for warranty compliance. Fuel pump strainers are included on electric pumps without notation. If a strainer is listed in the pump description, you must order it separately. Due to electrical requirements on certain fuel pumps, models denoted with one or two asterisks (* or **) require a strainer and wire harness adaptor for installation. * use S20194 strainer & S88536 wire harness ** use S20197 strainer & S88536 wire harness

Electric Pumps

G4805

1982 1982-83 1983 1984 1985-86

151/2.5-2 151/2.5-F 151/2.5-2 151/2.5-2 151/2.5-2

TBI w/o cruise control ........................................................... ............................................................................................... except Canada........................................................................ use S20194 strainer ............................................................... ...............................................................................................

29.99 27.99 29.99 36.99 44.99

ea ea ea ea ea

1985-89 1990-92 1993-94 1995 1996-97 1998 1999-02

173/2.8-S 189/3.1-T 207/3.4-S 231/3.8-K 231/3.8-K 231/3.8-K 231/3.8-K

............................................................................................... 61.99 ............................................................................................... 47.99 .............................................................................................. 219.99 .............................................................................................. 219.99 pump & sender assembly ..................................................... 194.99 pump & sender assembly ..................................................... 234.99 pump & sender assembly ..................................................... 201.99

ea ea ea ea ea ea ea

1982-83 1984 1985-87 1985-87 1985 1986-87 1987 1987 1988-92 1988-92 1988-89 1988-92 1988-92 1990-92 1993-94 1995 1996-97 1998 1999-02

305/5.0-7,S 305/5.0-G 305/5.0-F 305/5.0-F 305/5.0-G 305/5.0-H 350/5.7-8 350/5.7-8 350/5.7-8 350/5.7-8 305/5.0-E 305/5.0-F 305/5.0-F 305/5.0-E 350/5.7-P 350/5.7-P 350/5.7-P 350/5.7-G 350/5.7-G

with electric pump ................................................................. 34.99 ea with electric pump ................................................................. 27.99 ea OE replacement ..................................................................... 61.99 ea optional hi-performance ........................................................ 91.99 ea High Output w/ elec pump .................................................... 39.99 ea w/o FI, use S20194 strainer ................................................... 35.99 ea ............................................................................................... 61.99 ea optional hi-performance ........................................................ 91.99 ea ............................................................................................... 61.99 ea optional hi-performance ........................................................ 91.99 ea ............................................................................................... 32.99 ea OE replacement ..................................................................... 61.99 ea optional hi-performance ........................................................ 91.99 ea ............................................................................................... 32.99 ea use S20197 strainer .............................................................. 141.99 ea use S20192 strainer .............................................................. 141.99 ea pump & sender assembly ..................................................... 194.99 ea pump & sender assembly ..................................................... 289.99 ea pump & sender assembly ..................................................... 371.99 ea Strainers & Harness New strainers must be used on electric pumps for warranty compliance. Due to electrical requirements on certain fuel pumps, models noted above with one or two asterisks (* or **) require a strainer and wire harness adaptor for installation. S20192 strainer .............................................................................................................................. 6.99 ea S20194 strainer .............................................................................................................................. 4.99 ea S20197 strainer .............................................................................................................................. 5.99 ea S88536 wire harness ...................................................................................................................... 6.99 ea

www.classicindustries.com

G4806

1982-02 Fuel Pump Relay A defective fuel pump relay can be the cause of starting problems in your Camaro. When you turn the key to the “on” position, you should hear the fuel pump “whirr” for a few moments as it pressurizes the system. If not, (and the pump is good) that may be an indication that you have a bad fuel pump relay. We now offer these original GM or reproduction fuel pump relays for1982-02 models. G4805 1982 GM .......................... 19.99 ea 19868 1982 5.0L (replacement) .. 19.99 ea G4806 1983 GM .......................... 15.99 ea 19844 1983 305-S ....................... 11.99 ea 19842 1984-86 305-G ....................... 9.99 ea 19842 1984-86 GM .......................... 9.99 ea 19844 1985-86 305-F ....................... 11.99 ea 19844 1987-89 all (replacement) ...... 11.99 ea G4808 1987-89 GM .......................... 16.99 ea 19856 1990-92 all (replacement) ...... 14.99 ea G4803 1990-92 GM .......................... 14.99 ea 19265 1993-97 all 5-pin (black) ....... 14.99 ea 19264 1998-02 all 4-pin (gray) ......... 14.99 ea

Universal Fuel Pump Relay This universal fuel pump relay will ensure proper wiring which reduces the risk of damaging the fuel pump, and offers consistent fuel pressure. This relay is used with fuel pump part# E1791 or E1792. Note: No further discounts apply.

E1795

universal fuel pump relay......

Electric Fuel Pumps

59.99 ea

535

Fuel & Exhaust L

Inline 4 P60294 P60293 P60294 P60567 P60869 V6 P74006* P74037** P74130 P74130 P74782M P74762M P74920M V8 P60288 P60293 P74006* P74209HP* P60488 P74050 P74006* P74209HP* P74006** P74209HP** P74000* P74006** P74209HP** P74000** P74131 P74131 P74782M P74783M P74921M

Electric Fuel Components EFI Bypass Regulator

In-Line Electric Fuel Pump H128011

Holley Electric Fuel Pumps We offer externally mounted Holley electric fuel pumps. They all feature the proven rotor and vane design and are available in ratings from 97 GPH to 140 GPH. The 97 GPH “red” pump is set at 7 PSI and does not require a regulator. The 110 GPH “blue” pump is set at 14 PSI and includes a regulator. The 140 GPH “black” pump is also set at 14 PSI and can be used for gas or alcohol fuel.

This in-line electric fuel pump is continuous duty rated and is ideal for EFI applications that require additional pumping capabilities for upgraded modifications. Works superbly as either an in-line booster pump or as a standalone unit. Use with EFI regulator part# E1728 for adjustability from 35 to 90 PSI. 57 GPH, 3/8" hose barb fittings. Note: No further discounts apply.

E3594

.......................... 229.99 ea

Quiet-Flo Electric Fuel Pumps This anodized aluminum EFI fuel pump offers maximum performance in a compact package. Its rugged housing and high quality internals make it both strong and durable. The in-line design keeps the pump motor and components cool even under harsh conditions. Features -10AN inlet/outlet with a flow rate of up to 80 GPH at 45 PSI for highHP fuel injected applications. This fuel pump supports 835 HP at 12 volts with a current draw of 12 AMPS at 45 PSI. 10AN inlet/outlet 80 GPH at 45 PSI. Important: Dimensions: 6-7/8" X 3-1/4". Note: No further discounts apply.

E1790

.......................... 584.99 ea

Note: No further discounts apply.

Red Pump H128011 97 GPH ......... 119.99 ea Blue Pump H128021 110 GPH ....... 139.99 ea Black Pump H128151 140 GPH ....... 179.99 ea Regulator H12803 4-1/2 to 9 PSI 29.99 ea

Fuel Pump Safety Switch This safety feature is a must have for any electric fuel-pump vehicle. This safety switch monitors the tach signal to limit when an electric pump can operate. When the key is first turned on, the fuel pump is allowed to run for three seconds, priming the fuel system. After that, it only operates if the engine is running. If the engine stops, so does the fuel pump. No plumbing into the oil lines or no extra priming button under the dash is required. RE12003 ......................... 64.99 ea

E1728

Fuel Pressure Regulators For those who want the best! These fuel pressure regulators are machined from aircraft quality aluminum and have fluorosilicone diaphragm material for high temperature protection and extended life. Compatible with all grades of gasoline and methanol fuels. Fully adjustable. Note: No further discounts apply.

160 GPH With 3/8" NPT Inlet/ Dual Outlets E1727 5-10 PSI .......... 144.99 ea 180 GPH With -6AN Inlet/Outlet/Bypass E1728 35-90 PSI ........ 199.99 ea With -10AM Dual Inlets/Outlet, -6AN Bypass E1729 35-90 PSI ........ 209.99 ea

62531

Electric Fuel Pumps

L

Fuel & Exhaust

These externally-mounted electric fuel pumps are ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT inlets and outlets along with an externally accessible pressure relief valve. Note: Not for fuel injected engines. Pumps that produce more than 7 psi should be used with a pressure regulator.

Chrome Housing 100 GPH 62531C 7 PSI ................ 79.99 ea 120 GPH 62541C 14 PSI .............. 83.99 ea 140 GPH 62561C 9 PSI ................ 79.99 ea Cadmium Housing 100 GPH 62531 7 PSI ................ 79.99 ea 120 GPH 62541 14 PSI .............. 79.99 ea 140 GPH 62561 9 PSI ................ 79.99 ea

536

E1791

Quiet-Flo Electric Fuel Pumps State-of-the-art electric fuel pumps offer maximum performance in a compact package for carbureted applications. Anodized aluminum housing and high quality internals make it both strong and extremely durable. The E1791 electric fuel pump is factory set to 6.5 PSI does not require a regulator. 3/8" inlet/outlet, 120 GPH free-flow, up to 600 HP. The E1792 electric fuel pump is preset to 12 PSI and requires an external regulator. 1/2" inlet/outlet, 160 GPH free-flow, up to 1000 HP. Important: For proper installation and voltage requirements, use fuel pump relay E1795. Note: No further discounts apply.

E1791 E1792

6.5 PSI ............. 219.99 ea 12 PSI .............. 274.99 ea

Electric Fuel Pumps

Micro Electric Fuel Pump This compact electric fuel pump is compatible with all gasoline fuels and additives. The solid state design has a low current draw of around one amp and makes a good stand alone pump or booster pump. Designed for carbureted vehicles with a 12 volt negative ground electrical system, this pump supports 4-7 psi at up to 35 gph. Include fittings, mounting hardware and instructions.

Performance EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive’s high-flow design, superb pressure control and legendary durability. Features- base pressure adjustable from 40-75 PSI, gasoline and alcohol compatible, fuel pressure rises on a 1:1 ratio with boost, 1/8" National Pipe Thread taper (NPT) gauge port. Includes (2) o-ring boss fittings (ORB06) inlet ports and (1) o-ring boss fitting (ORB-06) return port. A9713109 adj. w/EFI .... 169.99 ea

Universal Bypass Regulator A dual purpose, universal regulator for EFI or Carbureted street/ strip applications. Features pressure adjustable from 3 to 20 PSI with standard spring, (installed) or from 20 to 60 PSI with high pressure spring (included). Offers the full flow and rock steady fuel pressure that only a dynamic, Aeromotive bypass regulator provides. Capable of regulating any fuel pump between 100 and 250 GPH, fuel pressure rises on a 1:1 ratio when referencing boost. All ports are 3/8' National Pipe Thread taper (NPT), with one inlet and three outlets on the main body and one return port on the bottom. Note: Requires a return line to be installed from the bottom of the regulator to the top of the tank.

3 port 3/8" NPT A9713301.......................... 149.99 ea

Carbureted Bypass Regulator For use when converting from fuel injection to carburetion using the EFI pump in a carbureted application. Perfect for naturally aspirated or 'blow-through' supercharged engines. Features- base fuel pressure adjustable from 3-15 PSI, (1) o-ring boss fitting (ORB-10) inlet port and (1) o-ring boss fitting (ORB-08) return port, fuel pressure rises on a 1:1 ratio when referencing boost, bypass design provides the ultimate, dynamic fuel delivery system, ideal for converting from fuel injection to carburetion using the stock, in-tank pump, EFI conversions will require a largerthan-stock return line for proper low pressure control. Includes-(2) o-ring boss fittings (ORB-06) outlet ports and 1/8' National Pipe Thread taper (NPT) gauge port.

Note: Not for diesel applications.

Note: Requires Army/Navy fitting (AN-08) return line from bottom of regulator back to top of the tank.

71211

A9713204 2 port............. 194.99 ea

......................... 39.99 ea

Toll Free Order Line 800.854.1280

Fuel Lines FGL6909

FGL8507 FGL6701

1982-93 Front-to-Rear Lines

1967-69 Front-to-Rear Lines Reproduction fuel feed lines for 1967-69 models. Extends from the fuel tank to the fuel pump and features the correct bends. Choose between OEM material or stainless steel lines. 1 piece lines. OEM Material 6 Cylinder FGL6701 1967-68 5/16" feed line ...... 69.99 ea FGL6905 1969 5/16" feed line ...... 69.99 ea Small Block FGL6701 1967-68 5/16" feed line ...... 69.99 ea FGL6703 1967 3/8" feed line ........ 69.99 ea FGL6803 1968 3/8" feed line ........ 69.99 ea FGL6907 1969 3/8" feed line ........ 69.99 ea Big Block FGL6704 1967 3/8" feed line ........ 69.99 ea FGL6805 1968 3/8" feed line ........ 69.99 ea FGL6907 1969 3/8" feed line ........ 69.99 ea Stainless Steel 6 Cylinder FGL6701S 1967-68 5/16" feed line ...... 99.99 ea FGL6905S 1969 5/16" feed line ...... 99.99 ea Small Block FGL6701S 1967-68 5/16" feed line ...... 99.99 ea FGL6703S 1967 3/8" feed line ........ 99.99 ea FGL6803S 1968 3/8" feed line ........ 99.99 ea FGL6907S 1969 3/8" feed line ........ 99.99 ea Big Block FGL6704S 1967 3/8" feed line ........ 99.99 ea FGL6805S 1968 3/8" feed line ........ 99.99 ea FGL6907S 1969 3/8" feed line ........ 99.99 ea

Reproduction fuel feed lines for 1982-93 models. Extends from the fuel tank to the fuel pump and features the correct bends. Choose between OEM material or stainless steel lines. Each is guaranteed to fit perfectly. 1 piece lines. OEM Material With Carbureted Engine FGL8503 1985-87 3/8", LH ............... 69.99 ea With Fuel Injected Engine FGL8203 1982-84 3/8", RH ............... 69.99 ea FGL8507 1985-92 3/8", filter to tank . 69.99 ea FGL8506 1985-92 3/8", filter to hose . 69.99 ea FGL8508 1985-92 3/8", hose to rail ... 29.99 ea FGL9301 1993 3/8", feed to filter . 49.99 ea Stainless Steel With Carbureted Engine FGL8503S 1985-87 3/8", LH ............... 99.99 ea With Fuel Injected Engine FGL8203S 1982-84 3/8", RH ............... 99.99 ea FGL8507S 1985-92 3/8", filter to tank . 99.99 ea FGL8506S 1985-92 3/8", filter to hose . 99.99 ea FGL8508S 1985-92 3/8", hose to rail ... 59.99 ea FGL9301S 1993 3/8", feed to filter . 69.99 ea

K0093

FGL8204

1969-91 Fuel Return Lines These fuel return lines are designed to replace the original lines exactly. Includes original size line with correct bends for ease of installation. Choose from original style material or upgrade to stainless steel. All lines are 1/4" unless noted. Check below for the correct application for your year and model. Note: *5/16" tubing. Shipped double oversize.

OEM Material FGL6909 1969 FGL7002 1970-73 FGL7204 1974 FGL7504 1975-76 FGL7802 1977-79 FGL8002 1980-81 FGL8006 1980-81 FGL8204 1982-84 FGL8205* 1982-84 FGL8505* 1985-91 FGL8512 1985-91 FGL9302* 1993 Stainless Steel FGL6909S 1969 FGL7002S 1970-73 FGL7204S 1974 FGL7504S 1975-76 FGL7802S 1977-79 FGL8002S 1980-81 FGL8006S 1980-81 FGL8204S 1982-84 FGL8205S* 1982-84 FGL8505S* 1985-91 FGL8512S 1985-91 FGL9302S* 1993

OS2

1pc V8 .............. 2pc .................... 2pc .................... 2pc .................... 2pc .................... 2pc exc Z28 ...... 2pc Z28 ............. 1pc LH .............. 1pc RH .............. 1pc LH w/carb .. 1pc RH .............. 1pc V6 ..............

69.99 69.99 69.99 69.99 69.99 69.99 69.99 69.99 69.99 69.99 69.99 49.99

ea set set set set set set ea ea ea ea ea

1pc .................... 2pc .................... 2pc .................... 2pc .................... 2pc .................... 2pc exc Z28 ...... 2pc Z28 ............. 1pc LH .............. 1pc RH .............. 1pc LH w/carb .. 1pc RH ............ 1pc V6 ..............

99.99 99.99 99.99 99.99 99.99 99.99 99.99 99.99 99.99 99.99 99.99 69.99

ea set set set set set set ea ea ea ea ea

1970-91 Fuel Vapor Lines FGL7001 K0094

1967-81 Fuel Line Clip Sets Reproduction clips used to mount the steel fuel lines to the frame on various GM models. Available for single 3/8" fuel line applications and for a 3/8" line with a 1/4" return line.

FGL7705

1970-81 Front-to-Rear Lines

Note: * 6 piece set. ** 7 piece set.

Reproduction fuel feed lines for 1970-81 models. Extends from the fuel tank to the fuel pump and features the correct bends. Choose between OEM material or stainless steel lines. 2 piece lines unless noted. Note: *1 piece line.

FGL7001S FGL7006S FGL7201S FGL7506S FGL7705S FGL7801S FGL8001S FGL8005S

OEM Material 1970-74 3/8", V6 only ........ 1970-74 3/8" ....................... 1972 3/8", 396 only ....... 1975-76 3/8" ....................... 1977 5/16", crossover ... 1977-79 3/8" ....................... 1980-81 3/8", exc. Z28 ....... 1980-81 3/8", Z28 .............. Stainless Steel 1970-74 3/8" ....................... 1970-74 3/8", V6 only ........ 1972 3/8", 396 only ....... 1975-76 3/8" ....................... 1977 5/16", crossover ... 1977-79 3/8" ....................... 1980-81 3/8", exc. Z28 ....... 1980-81 3/8", Z28 ..............

69.99 69.99 69.99 69.99 39.99 69.99 69.99 69.99

set set set set ea set set set

99.99 99.99 99.99 99.99 49.99 99.99 99.99 99.99

set set set set ea set set set

www.classicindustries.com

w/single 3/8" line ... 17.99 set w/3/8" & 1/4" ........ 17.99 set w/single 3/8" line ... 17.99 set w/3/8" & 1/4" ........ 17.99 set w/3/8" & 1/4" ........ 2.99 ea

Fuel Pump Safety Switch This fuel pump safety switch shuts off fuel flow whenever oil pressure drops below 15 psi. This adds a safety factor in case of an accident or engine stall. Designed for 12 volt electrical systems and can be teed into the oil pressure sending unit with an 1/8" NPT tee. 77872 .................................................. 21.99 ea

Note: *1/4" tubing. Shipped double oversize.

OEM Material FEM04 1970-73 FEM03 1970-74 FGL7202* 1972 FEM74 1974 FEM05 1975-77 FGL7603 1976 FGL7704 1977 FEM08 1978 FEM10 1979-81 FGL8206 1982-84 FGL8510 1985-91 FGL8509 1985-91 FGL8504* 1985-91 Stainless Steel FEM04S 1970-73 FEM03S 1970-74 FGL7202S* 1972 FEM74S 1974 FEM05S 1975-77 FGL7603S 1976 FGL7704S 1977 FEM08S 1978 FEM10S 1979-81 FGL8206S 1982-84 FGL8510S 1985-91 FGL8509S 1985-91 FGL8504S* 1985-91

4pc ................... 1pc 6 cyl .......... 2pc 396 only .... 4pc ................... 1pc ................... 2pc ................... 1pc ................... 2pc ................... 2pc ................... 1pc LH ............. 1pc LH ............. 1pc RH ............. 1pc LH w/carb .

OS2

98.99 69.99 69.99 98.99 99.99 69.99 69.99 99.99 99.99 69.99 69.99 69.99 69.99

set ea set set ea set ea set set ea ea ea ea

4pc ................... 138.99 1pc 6 cyl .......... 139.99 2pc 396 only .... 99.99 4pc ................... 139.99 1pc ................... 139.99 2pc ................... 99.99 1pc ................... 99.99 2pc ................... 139.99 2pc ................... 139.99 1pc LH ............. 99.99 1pc LH ............. 99.99 1pc RH ............. 99.99 1pc LH w/carb . 99.99

set ea set set ea set ea set set ea ea ea ea

Fuel Lines

537

Fuel & Exhaust L

FGL7006 FGL7001 FGL7201 FGL7506 FGL7705* FGL7801 FGL8001 FGL8005

Small Block K0093* 1967-69 K0094** 1969-81 Big Block K0093* 1967-69 K0094** 1969-81 Individual clips K22163 1969-81

These fuel vapor lines are designed to replace the original lines exactly. Includes original size line with correct bends for ease of installation. Choose from original style material or upgrade to stainless steel. All lines except some smaller pieces of sets are 5/16" unless noted. Check below for the correct application.

Carburetors

E203

2523

1967-79 Small Block 2 bbl. Carburetors These 2 bbl. carburetors are excellent replacements for your Camaro. These Rochester carburetors are manufactured to original specifications and have a remote, or climatic style choke. These are replacement carburetors which include a current production date. 2523 1967-68 283, 307, 327 ............. 199.99 ea 2527 1969 307 ............................. 229.99 ea 2526 1969 327, 350 ..................... 164.99 ea 2539A 1970 307 ............................. 229.99 ea 2537 1970 350 ............................. 219.99 ea 2540 1971 307 ............................. 164.99 ea 2538A 1971 350 ............................. 164.99 ea 2549 1972 307 ............................. 209.99 ea 2550 1972 350 ............................. 259.99 ea 2573 1973 307 ............................. 209.99 ea 2574A 1973 350 ............................. 229.99 ea 2572 1974 350 ............................. 219.99 ea 2567 1975-76 262 ............................. 189.99 ea 2568 1975-76 305, 350 ..................... 219.99 ea 2568 1977 305 Federal ................ 219.99 ea 2569 1977 305 California ............ 239.99 ea 2614 1978 305 Federal ................ 219.99 ea 2615 1978 305 California ............ 219.99 ea 2601 1979 305 ............................. 369.99 ea

E202 HC3021

E208

E204

14318 CR101

E207

1968-69 Cross Ram Induction Systems & Components The ultimate Camaro induction system is available as a reproduction. This system is correct in every detail and includes a GM licensed intake manifold, cast from the original tooling with correct part number and Winters Foundry markings, twin Holley carburetors with correct list and part numbers, Heim-jointed throttle linkage and throttle cable, throttle cable bracket, cable type throttle pedal arm, gaskets, all fuel lines and Y-block, oil filler tube, air cleaner elbow, complete oval or wide base style air cleaner with hood seal, heater hose fittings, throttle return spring and bracket. This is a perfect recreation of the original Cross Ram intake set up manufactured in original detail. Assembly required. Note: Cross Ram hood is available separately. See hood section for details. No further discounts apply.

4395

L

Fuel & Exhaust

1967-87 Small Block 4bbl. Carburetors These 4 bbl. Rochester carburetors are manufactured to original specifications and have a remote, or climatic style choke. These are replacement carburetors which include a current production date. Note: 4324 and 4333 must use G6999 heat shield. 4324 1967 327, 350 ................. 267.99 ea 4333 1968 327, 350 ................. 279.99 ea 4335 1969 350 ......................... 349.99 ea 4362 1970 350 ......................... 309.99 ea 4363 1971 350 ......................... 319.99 ea 4372 1972 350 ......................... 319.99 ea 4401 1973 350 ......................... 319.99 ea 4400 1974 350 ......................... 319.99 ea 4399 1975-77 350 ......................... 369.99 ea 4344 1978-79 305, 350 ................. 419.99 ea 4380 1980 305 CA emission ... 549.99 ea 4391 1980 305 ......................... 489.99 ea 4395 1981-90 all clsd loop choke . 489.99 ea 4396 1981-86 all ........................... 409.99 ea 4397 1986-87 all ........................... 499.99 ea

1967-72 Big Block 4bbl. Carburetors These 4 bbl. Rochester carburetors are manufactured to original specifications and have a remote, or climatic style choke. These are replacement carburetors which include a current production date. 4325 1967 396 ......................... 379.99 ea 4334 1968-69 396, 427 ................. 249.99 ea 4362A 1970 396, 402 ................. 329.99 ea 4363A 1971 402 ......................... 329.99 ea 4372A 1972 402 ......................... 329.99 ea

538

Carburetors

Complete Cross Ram Induction Sets HC3021 1968-69 with oval base air cleaner ........................................................................... HC3022 1968-69 with wide base air cleaner .......................................................................... Cross Ram Induction Components E203 1968-69 1-3/4" air cleaner and base assembly.......................................................... E202 1968-69 1-3/4" air cleaner element........................................................................... CR102 1969 2-1/2" air cleaner element........................................................................... HC331 1968-69 air cleaner seal ............................................................................................ E208 1969 return spring bracket ................................................................................... E207 1969 throttle cable ............................................................................................... E204 1969 carburetor linkage ....................................................................................... 14318 1968-69 accelerator pedal throttle rod ...................................................................... CR101 1969 air cleaner elbow and nut ............................................................................

7894.99 set 7994.99 set 489.99 ea 1634.99 set 154.99 ea 69.99 ea 26.99 ea 242.99 ea 104.99 ea 59.99 ea 209.99 ea

TB101

1992-97 Performance Throttle Bodies

JG1340

With larger ports in the throttle body your engine will receive a greater volume of air which will allow it to make more potential horsepower and less likely to be a restriction in the system. This is why we offer the 52mm and 58mm hi-flow throttle bodies. Designed for outstanding throttle response and wheel spinning torque, these throttle bodies have been meticulously cast and flow bench tested for optimum airflow. It provides supreme power when mated with hi-flow intake systems, exhaust systems, headers, or superchargers. Note: No Core Required.

TB100 TB101 TB102 TB103

1992-93 1994-97 1992-93 1994-97

52mm .................. 52mm .................. 58mm .................. 58mm ..................

339.99 339.99 339.99 339.99

ea ea ea ea

Driven Carb Defender Driven Carb Defender fuel additive has been formulated to protect against harmful ethanol deposits and corrosion in fuel and the induction system. Special inhibitors resist expensive damage and reduced performance from moisture accumulation from modern ethanol-blended gasoline. This additive controls combustion chamber residue, cleaning and protecting fuel system and intake tract surfaces to keep carburetors functioning properly. Fuel Defender is ideal for everyday drivers or classics that spend time in storage between cruises and special events. One bottle treats up to 25 gallons of ethanol-blended fuel. JG1340 4.5 oz bottle .............................. 9.99 ea JG1341 case of 6 - 4.5 oz. bottles ......... 59.99 cs

Toll Free Order Line 800.854.1280

Edelbrock Carburetors

E1806

E1805

Edelbrock Thunder Series Carburetors E-Street Universal EFI System Upgrade any carbureted V8 to electronic fuel injection with this E-Street universal throttle body EFI system! Easily installs on any intake manifold with a square flange 4150 style mount and accepts virtually any cleaner. Includes high flow four-barrel throttle body, simple-to-install wiring harness, wide band O2 sensor, computer with a pre-loaded tune, and a handheld touchscreen for easy step-by-step wireless programming. Note: No further discounts apply.

E3600

w/o fuel system ............................................................................................................. 2239.99 set

Edelbrock Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. These carburetors include all of the performance features of the Performer Series carburetors and also include distinctive black hardware, dual fuel inlets (shipped with left side plugged), lightweight ball-burnished and CNC-profiled body, and the Quick-Tune secondary. They’re available in 650 CFM and 800 CFM sizes with manual or electric choke. There’s even a 650 CFM version specifically designed for off road vehicles. These Edelbrock carburetors bolt-on and run right out of the box! Simply dependable, proven performance for almost any carbureted vehicle. All Edelbrock carburetors come with an installation kit and owners manual. Note: *Off-road vehicles only. No further discounts apply.

E1479

Edelbrock Carburetor Calibration Sets

E3604

These sets include a selection of metering rods, jets, and step up springs that allow fine tuning and calibration of Edelbrock carburetors. Made in USA. Note: Not legal for pollution controlled vehicles. No further discounts apply.

Performer Series Carburetor Sets E1479 for 1405 models ....................... E1480 for 1407, 1410 models ............. E1480 for 1412, 1413 models ............. E1486 for 1403, 1404 models ............. E1486 for 1801, 1802 models ............. E1486 for 1803, 1804 models ............. E1487 for 1406 models ....................... E1488 for 1409 models ....................... E1489 for 1411 models........................ Thunder AVS Series Carburetor Sets E1840 for 1805 & 1806 models .......... E1841 for 1812 & 1813 models .......... E1842 for 1826 & 1826 models ..........

69.99 64.99 64.99 61.99 61.99 61.99 44.99 61.99 51.99

set set set set set set set set set

59.99 set 71.99 set 59.99 set

Fuel Lines for Edelbrock Carburetors Note: No further discounts apply.

Single Feed Lines for Square Bore Carbs E8134 w/blue anodized fuel filter .......... 39.99 ea E8131 w/polished fuel filter ................... 39.99 ea E8126 w/3/8" barbed hose end, no filter 19.99 ea Dual Feed Lines for Thunder Series AVS Carbs E8133 w/blue anodized fuel filter .......... 94.99 ea E8128 w/polished fuel filter ................... 99.99 ea E8132 w/3/8" barbed hose end, no filter 81.99 ea Replacement Fuel Filter E8130 blue anodized fuel filter only ...... 29.99 ea E8129 polished fuel filter only............... 34.99 ea

www.classicindustries.com

manual choke ...... electric choke ...... manual choke ...... electric choke ...... manual choke ...... electric choke ......

364.99 411.99 379.99 409.99 421.99 454.99

ea ea ea ea ea ea

manual choke ...... electric choke ...... manual choke ...... electric choke ......

484.99 539.99 539.99 589.99

ea ea ea ea

Edelbrock Performer Series Carburetors E3607

Edelbrock High Pressure Fuel System Sets Upgrading to fuel injection requires a high pressure fuel system. Edelbrock offers a number options for converting a low pressure fuel system to high pressure for fuel injection installation. Note: No further discounts apply.

Return-Style Fuel System Includes high pressure fuel pump, fuel filter, supply and return hose, adjustable pressure regulator with return port, fittings, mounting brackets, and hardware. Supports up to 600 HP. Important: Requires return fitting to be installed in fuel tank.

E3604

return style fuel system ............ 571.99 set Fuel Sump Module System Fuel sump modules are fed by the low pressure fuel pump and store fuel in the under the hood before providing regulated high pressure to the fuel injectors without the need of a return system. Includes 13" x 7-3/4" x 5" sump, high pressure fuel pump and regulator pre-installed, wiring harness, fuel filters, hose, fittings, brackets and mounting hardware. Supports up to 600 HP. E3605 58 psi fuel sump system ........... 591.99 set E3607 49 psi fuel sump system ........... 591.99 set

By design, Performer Series square-bore carburetors are refined to provide the widest possible torque range when matched with Edelbrock Performer, Performer RPM, RPM Air-Gap or Torker II manifold and camshaft combinations. However, these carburetors are not limited to these applications, they also match well with most stock and other manifolds of similar design. Performer Series square-bore carburetors are all aluminum, ball burnished and lightweight. There are no power valves to blow out or plastic parts to break. The two piece construction resists warping and the metering rods can be changed in seconds without removing the carburetor. All Edelbrock carburetors come with an installation kit and owners manual. Note: *50 state legal for all 1980 and earlier GM V8 engines. No further discounts apply.

Standard Finish E1404 500 CFM E1403 500 CFM E1400* 600 CFM E1405 600 CFM E1406 600 CFM E1407 750 CFM E1411 750 CFM E1412 800 CFM E1413 800 CFM EnduraShine Finish E14054 600 CFM E14064 600 CFM

manual choke ...... electric choke ...... electric choke ...... manual choke ...... electric choke ...... manual choke ...... electric choke ...... manual choke ...... electric choke ......

329.99 374.99 379.99 304.99 334.99 344.99 374.99 429.99 429.99

ea ea ea ea ea ea ea ea ea

manual choke ...... 439.99 ea electric choke ...... 501.99 ea

Carburetors

539

Fuel & Exhaust L

These fuel line and filter sets fit Thunder Series or Performer Series Carburetors. Features chromed hard steel line and Russell fuel filter.

Standard Finish E1805 650 CFM E1806 650 CFM E1825* 650 CFM E1826* 650 CFM E1812 800 CFM E1813 800 CFM EnduraShine Finish E18054 650 CFM E18064 650 CFM E18124 800 CFM E18134 800 CFM

Performance Carburetors

67213 CB710600

67200

PROFORM Race Series Carbs

67208

Carburetor Main Body Features: Lightweight Aluminum-Not Heavy Zinc High-Flow Center Section Design Flat Surfaces: CNC Precision Finish Changeable Screw-In Idle Air Bleeds Changeable Screw-In High Speed Bleeds High-Performance Down-Leg Boosters except 650 CFM Electric Choke on Mechanical Secondary Models Electric Choke on Vacuum Secondary Models Fuel Bowl Features: Lightweight Die Cast Aluminum Fuel Level Sight Windows Externally Adjustable Needle & Seat Dual Feed Fuel Inlet Notched Secondary Float Billet Throttle Base Plate Features: Adjustable Secondary Housing on Vacuum Secondary Models Easy Access Secondary Idle Air Flow Adjustment Strong, Lightweight Billet Aluminum Corrosion Resistant Bright Anodized Appearance Button Torx Head Throttle Plate Screws Power Valve Blow Out Protection Slip Link Linkage on Mechanical Secondary Models Billet Metering Block Features: Strong, Lightweight Billet Aluminum Four Corner Idle System on Mechanical Secondary Models Changeable Idle Feed Restrictions Durable, No Warping or Porosity Problems Secondary Jet Extensions on Mechanical Secondary Models Non-Stick Gaskets

L

Fuel & Exhaust

PROFORM Street Series Carbs Based on the highly successful Race Series carburetors, PROFORM street carburetors are constructed with lightweight aluminum, including provisions for a choke assembly and changeable idle air bleeds for easy, non-permanent calibration changes if necessary. Fine tuning is accomplished by simply changing air bleeds, not opening up calibration restrictions with a drill bit! These dual fuel feed inlet carburetors are hand assembled in the U.S. using PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, aluminum fuel bowls, and a high performance billet throttle base plate. Mechanical Secondaries 67211 600CFM electric choke ......... 474.99 ea 67212 650CFM electric choke ......... 489.99 ea 67213 750CFM electric choke ......... 504.99 ea 67214 850CFM electric choke ......... 519.99 ea Vacuum Secondaries 67206 600CFM electric choke ......... 474.99 ea 67207 650CFM electric choke ......... 489.99 ea 67208 750CFM electric choke ......... 504.99 ea

540

Carburetors

Finally an affordable high-performance race carburetor! PROFORM’s Race Series Carburetors are hand assembled in Bowling Green, Kentucky utilizing PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, aluminum fuel bowls, and a high performance billet throttle base plate. These dual fuel feed inlet carburetors are equipped with a square bore base plate. Mechanical Secondaries 67199 650CFM no choke ................ 639.99 ea 67200 750CFM no choke ................ 644.99 ea 67201 850CFM no choke ................ 729.99 ea 67202 950CFM no choke ................ 749.99 ea Vacuum Secondaries 67204 650CFM no choke ................ 639.99 ea 67205 750CFM no choke ................ 644.99 ea

Quick Fuel Technology Slayer Carburetor The 600 and 750 cfm Slayer Series carburetors are designed with the same engineering innovations and featured on all QFT products. These affordable, vacuum secondary street carburetors feature all aluminum construction and hand-built quality. They are designed with a secondary metering plate with changeable jets, eliminating the need for a costly secondary metering block. Note This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles.

CB710600 600 CFM electric choke .... 329.99 ea CB710750 750 CFM electric choke .... 329.99 ea

CB711650 CB712651

Quick Fuel Technology Street Carburetors

CB711780

Quick Fuel Technology Hot Rod Carburetors The Hot Rod Series of carburetors is designed for street applications. Made from light-weight aluminum castings and packed full of features, these carburetors are sure to make your hot rod run its best! Hand assembled and engine tested in the USA! Available in both vacuum and mechanical secondary configurations. Note This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles.

Mechanical Secondary Carburetors CB711600 600 CFM........................... 419.99 CB711650 650 CFM........................... 449.99 CB711750 750 CFM........................... 531.99 CB711850 850 CFM........................... 551.99 Vacuum Secondary Carburetors CB711580 580 CFM........................... 419.99 CB711680 680 CFM........................... 439.99 CB711780 780 CFM........................... 449.99

ea ea ea ea ea ea ea

Super Street carburetors offer race performance in a lightweight, street-friendly package. These carburetors are manufactured from aluminum and designed for maximum tunability through idle feed adjustment and power valve channel restrictions, as well as idle and high-RPM air bleeds. Available with vacuum secondaries, which use fuel bowls with single-sight glass windows, or a mechanical secondary design featuring dual-inlet, dual-sight glass 4500-style fuel bowls with links to tune the secondary opening rate. Note *Features blow-through annular booster. This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles.

Mechanical Secondary Carburetors CB712650 650 CFM ........................... 574.99 CB712651 650 CFM annular booster .. 619.99 CB712652* 650 CFM annular booster .. 779.99 CB712653 650 CFM E85 compatible . 619.99 CB712750 750 CFM ........................... 579.99 CB712751 750 CFM annular booster .. 634.99 CB712752 750 CFM E85 compatible . 664.99 CB712830 830 CFM ........................... 584.99 CB712850 850 CFM ........................... 604.99 Vacuum Secondary Carburetors CB712680 680 CFM ........................... 554.99 CB712735 735 CFM ........................... 559.99 CB712780 780 CFM ........................... 569.99 CB712880 880 CFM ........................... 574.99

ea ea ea ea ea ea ea ea ea ea ea ea ea

Toll Free Order Line 800.854.1280

Performance Fuel Systems

1967-79 Carburetor Cover Street Demon Calibration Set

Keep dirt and contaminants out of your carburetor while working on your engine with the air cleaner removed. Produced using tough plastic construction. For all 4 bbl. carburetors. 5-1/8" diameter T2012 1967-79 4 bbl. .......................... 6.99 ea

This calibration kit allows fine tuning of Street Demon carburetors. Includes an assortment of primary jets, metering rods and step-up springs along with secondary jets all in a convenient plastic storage case.

D1903

Note: No further discounts apply.

D1921

Demon calibration set ........... 79.99 set

D1904

Demon Universal Installation Set

Street Demon Carburetors The Street Demon redefines the street carburetor with clean looks, brisk performance, and universal design. Available in 625 and 750 cfm, the Street Demon supports stock and mildly modified V8's with smooth, crisp throttle response. A dual bolt pattern works with most four barrel spread bore and square flange intake manifolds. Includes integrated 700R4/200R4 transmission kickdown location and electric choke. Choose from all-aluminum construction or a polymer main body design. Made in USA.

This set contains installation hardware for most Demon 4 barrel carburetors, including mounting studs, washers, nuts, air cleaner studs, vacuum caps, throttle cable balls with bushing adapters for throttle levers and three types of base gaskets for square and spread bore carburetors, including a gasket for the Street Demon. Note: No further discounts apply.

D160049

Demon installation set........... 19.99 set

Note: No further discounts apply

625 CFM Carburetors D1900 ball burnished finish ................ 314.99 D1901 w/polymer main body ............. 314.99 D1902 hand polished finish ................ 466.99 750 CFM Carburetors D1903 ball burnished finish ................ 346.99 D1904 w/polymer main body ............. 346.99 D1905 hand polished finish ................ 474.99

ea ea ea ea ea ea

Street Demon Throttle Solenoid Set Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel systems includes the solenoid, bracket, and mounting nut. Made in the USA.

2900

MSD Atomic EFI Set The MSD Atomic EFI set fits all engines making up to 525 horsepower at the crankshaft. The annular ring charge injection design produces a better air/fuel mixture and distributes it evenly among the cylinders. As a result, engines idle, start and drive better with the Atomic EFI set. Throttle bodies feature 80lb. injectors and a self-calibrating throttle position sensor. They also feature an internal fuel rail for no-leak, no-hassle fuel delivery. The master set is complete and ready to use out of the box. It includes the EFI throttle body, electric fuel pump, fuel line and filter with hardware, power module with wide-band O2 sensor and handheld controller. Also available are the throttle body set which includes everything except for the fuel system components. Or purchase the fuel components separately. Note: Atomic EFI sets are California emissions approved for carbureted General Motors vehicles 1987 and older. E.O number D-722. No further discounts apply.

Atomic EFI Master Set 2900 .............................................. 2429.99 set Throttle Body Set 2910 .............................................. 2199.99 set Fuel System Components for up to 525hp 2920 .............................................. 399.99 set

Note: No further discounts apply.

D1950

Street Demon............................ 104.99 set

When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal to the computer. The simple design allows for easy calibration and voltage adjustments. Includes all necessary installation hardware. Made in USA. Note: No further discounts apply.

D1951

Street Demon TPS set ............. 154.99 set

www.classicindustries.com

Street Demon Cable Brackets These brackets remove the guesswork when installing a Street Demon carburetor in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion protection and include installation hardware. Made in USA. Note: No further discounts apply.

Throttle Rod Adapter D1952 for mechanical linkage ............. 14.99 ea Throttle and Transmission Kickdown D1953 bracket set ................................ 24.99 set

MSD Atomic EFI High Horsepower Fuel Set High horsepower fuel components set for MSD Atomic EFI sets. This set supports 620 horsepower at the crankshaft and supplies more fuel to the Atomic EFI throttle body than the standard Atomic EFI fuel pump. Includes 15' of 3/8" fuel line, inline electric fuel pump, fuel filter, brackets and EFI-specific fuel line clamps. Note: No further discounts apply.

2921

................................................ 599.99 set

Carburetors

541

Fuel & Exhaust L

D1952

Street Demon TPS Set

Carburetors H90670 H4779

Holley 390 CFM Carburetor This Holley 4160 Series 390 CFM 4 barrel carburetor is ideal for small displacement V8 or V6 engines. It features side hung float bowls, a universal throttle lever, vacuum secondaries, and an electric choke. This is one of the simplest ways to get more performance from your engine. Note: No further discounts apply.

H8007

390 CFM

four barrel........... 476.99 ea

Holley Truck Avenger Series Carburetors

Holley Mechanical Secondary Carburetors These classic Holley 4150 Series double pump carburetors are available in several sizes and with manual or electric choke. These carburetors feature mechanical secondaries, center hung float bowls and power valve blow-out protection. All have manual choke. Note: No further discounts apply.

H4776 H4777 H4778 H4779 H4780 H4781

600 CFM 650 CFM 700 CFM 750 CFM 800 CFM 850 CFM

manual choke ..... manual choke ..... manual choke ..... manual choke ..... manual choke ..... manual choke .....

464.99 464.99 494.99 494.99 524.99 524.99

ea ea ea ea ea ea

The Holley Truck Avenger Series carburetors are designed to take the guesswork out of building a trouble free off road/towing engine. These carburetors feature the No Trouble™ adjustable vacuum secondary and electric choke, externally adjustable spring loaded needle and seats, clear sight plugs. The exclusive metering block design eliminates fuel spillover through the boosters at extreme angles. When you’re looking for off-road performance and reliability, choose a new Holley Truck Avenger series carburetor for your fuel delivery. Note: No further discounts apply.

H90670 670 CFM H90770 770 CFM

four barrel........... 489.99 ea four barrel........... 489.99 ea

H3310

Holley Vacuum Secondary Carburetors These classic Holley 4160 Series carburetors are available in several sizes and with manual or electric choke. These carburetors feature vacuum secondaries and power valve blow-out protection. All are bright chromate finish. Note: No further discounts apply.

H1850 H80457 H3310 H80508

600 CFM 600 CFM 750 CFM 750 CFM

manual choke ..... electric choke ..... manual choke ..... electric choke ....

309.99 321.99 339.99 335.99

ea ea ea ea

H80670

Aluminum Double Pumper Carburetors

The Holley 4150 Series Street Avenger™ Series carburetors are the first true performance carbs specifically designed, dyno tested, and calibrated for performance on the street. They feature the No Trouble™ adjustable vacuum secondary, four vacuum ports, electric choke, external float adjustment, and the new Gen IV Power Valve. If you’re looking for better throttle response, quicker acceleration, enhanced fuel economy and superior driveability, the Street Avenger™ carbs are your answer.

Holley's new series of aluminum double pump carburetors are constructed from aluminum, which compared to their zinc counterpart offer a 38% weight savings. Holley's aluminum double pump carburetors will hold their shine longer and also can be hand polished for a custom look. These Holley 4150 Series double pump carburetors are available in several sizes and with manual choke. These carburetors feature mechanical secondaries, center hung float bowls and power valve blow-out protection. The double pumper is designed for use on lightweight vehicles with a manual or automatic transmissions with a high stall and low rear end gears.

Note: No further discounts apply. 66635 8-21/32"

H80570 570 CFM H80670 670 CFM H80770 770 CFM

four barrel........... 431.99 ea four barrel........... 431.99 ea four barrel........... 431.99 ea

L

Fuel & Exhaust

Chrome dual-feed fuel line kits for Holley carbs. High quality gas lines specifically designed for Holley dual feed carburetors. 66635 8-21/32" inlet center to center .... 11.99 ea 66636 9-5/16" inlet center to center ...... 11.99 ea

Black anodized, billet aluminum adjustable fuel line for Holley carburetors. This line is manufactured with-8 AN inlet and 3/8" NPT port at the rear end. 7/8"-20 threads for the fuel bowl inlets. Note: No further discounts apply.

Note: No further discounts apply.

H3439

H80783 650 CFM

542

Holley Carburetors

600CFM 650CFM 700CFM 750CFM 850CFM

manual choke ..... manual choke ..... manual choke ..... manual choke ..... manual choke .....

449.99 449.99 479.99 479.99 509.99

ea ea ea ea ea

Adjustable Dual Feed Fuel Lines

Holley 650 CFM Carburetor This Holley 4150 Series 650 CFM 4 barrel carburetor is ideal for most moderate performance small block V8 engines. It features center hung float bowls, a universal throttle lever, vacuum secondaries, and an electric choke. This is one of the simplest ways to get more performance from your engine.

4150 & 4500 carbs .................. 236.99 ea

Note: No further discounts apply.

HC4776A HC4777A HC4778A HC4779A HC4781A

Dual-Feed Fuel Line

Holley Adjustable Fuel Line

HC4777A

Holley Street Avenger Carburetors

electric choke ..... 424.99 ea

Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, this fuel line is temperature, gas and oil resistant. Made for 3/8" NPT fittings, the fuel line is adjustable between the carb bowls from 7-1/2" to 11-1/2". Includes 1/8" pipe fitting and plug for optional fuel pressure gauge, etc. Hose inlet nipple not included. Note: No further discounts apply.

E8101

.................................................. 89.99 ea

Toll Free Order Line 800.854.1280

Carburetors Don’t settle for anything less than a perfect factory original replacement! These new Holley carburetor assemblies are designed to replace the factory original exactly. Each carburetor is manufactured from the original Holley tooling ensuring an authentic and powerful replacement of the original factory installed carburetor.

1968-69 Holley Carburetor Manufactured with original Holley tooling! Used on 1968-69 Camaro models equipped with a 302 and 1968 396/375hp. This is a 780CFM carburetor stamped with the GM #3923289-DZ and the Holley list #4053-DZ. Note: No further discounts apply.

HC369 HC369

1968-69 1968

302....................... 849.99 ea 396/375hp ........... 849.99 ea

1970 LT1 Z/28 Holley Carburetor This brand new Holley carburetor assembly for LT1-equipped 1970 Z28 Camaro models is an exact reproduction equipment, manufactured by Holley themselves, using their original tooling. Replaces GM part number 3972121 on both automatic and manual transmission cars. Important: Carburetor is stamped with current manufacturing date. Note: No further discounts apply.

H4555

1970

auto. or man trans..... 789.99 ea

1969 Holley Carburetor 750 CFM Holley Carburetor Classic Industries® offers newly re-manufactured 750 CFM Holley carburetors. They feature an original finish, vacuum secondaries, electric choke and Power Valve blowout protection. For all engines with or without air injection reactor (smog). These replacements are similar to the 780 CFM units installed on Z-28 and big block models and can be used to replace list numbers 3910, 4490, 4555, 4800-1, 4801-1, 6238-1 and 6329-1.

Manufactured with original Holley tooling! Used on 1969 Camaro models equipped with a 396/375hp or 427/425hp. This 780CFM carburetor is stamped with the GM #3959164-GE and the Holley list #4346-GE. Note: No further discounts apply.

HC370 HC370

1969 1969

396/375hp ........... 829.99 ea 427/425hp ........... 829.99 ea

1970 Holley Carburetor This Holley carburetor assembly for 1970 Camaro models is for LS6, L78, L89, 396 and 454 high performance engines. Each carburetor is manufactured from the original Holley tooling insuring an authentic and powerful replacement of the original factory installed carburetor. Replaces GM part number 3969898 for automatic transmission.

Important: Throttle solenoid used on some models not included. Order separately. Carburetor stamped with current manufacturing date. Note: No further discounts apply.

H80508 750 CFM replacement carb. ... 335.99 ea

1969 Holley Carburetor

Important: Carburetor is stamped with current manufacturing date. Note: No further discounts apply.

H4492

1970

auto trans .................. 789.99 ea

Manufactured with original Holley tooling! Used on 1969 Camaro models equipped with a 427 ZL1. This is a 850CFM double pump carburetor with mechanical secondaries and the Holley list #4296. Note: No further discounts apply.

HC422

1969

427/425hp ZL1.... 1079.99 ea

Important: Throttle solenoid used on some models not included. Order separately. Carburetor is stamped with current manufacturing date. Note: No further discounts apply.

80457

600 CFM replacement carb. ... 351.99 ea

www.classicindustries.com

1970 Holley Carburetor 1968-69 Crossram Holley Carburetor Manufactured with original Holley tooling! Used on 1968-69 Camaro models equipped with a 302 and the crossram dealer option. This 585CFM double pump carburetor comes with mechanical secondaries and the Holley list #4295. Fits front or rear location. 2 required. Note: No further discounts apply.

HC330

1968-69 .................................. 899.99 ea

This Holley carburetor assembly for 1970 Camaro models is for LS6, L78, L89, 396 and 454 high performance engines. Each carburetor is manufactured from the original Holley tooling insuring an authentic and powerful replacement of the original factory installed carburetor. Replaces part number 3967477 for manual transmissions. Important: Carburetor is stamped with current manufacturing date. Note: No further discounts apply.

H4557

1970

manual trans ............. 789.99 ea

Holley Carburetors

543

Fuel & Exhaust L

600 CFM Holley Carburetor Classic offers newly re-manufactured 600 CFM Holley carburetors. They feature an original finish, vacuum secondaries, and Power Valve blowout protection. For all engines with or without air injection reactor (smog). These replacements are similar to the units installed on 1967-69 Z28’s with cross ram induction and can be used to replace list numbers 3810S, 4410A, and 4295.

Carburetor Components H45229

Manual Choke Cable Mounting Hardware This universal bracket mounts inside the vehicle under the dashboard to secure the choke control cable. The cable clamp kit is for Holley model 4010, 4150, and 4160 carburetors only.

Holley Throttle Cable Bracket

Holley Vacuum Secondary Diaphragm

This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.

This vacuum secondary diaphragm fits most 4150 and 4160 square bore Holly carburetors.

Note: No further discounts apply.

H1354

H2088

with springs .............................. 26.99 ea

Note: No further discounts apply.

diaphragm................................. 11.99 ea

Note: No further discounts apply.

Cable Bracket H45229 universal ................................... 19.99 ea Cable Clamp Kit H45456 4010, 4150, & 4160 carbs. ....... 14.99 set

Holley Carburetor Ball Stud Set Install your Holley carburetor and hook it right up to your throttle linkage with these throttle ball studs.

TH350 Kickdown Bracket This bracket is designed to bolt to a small block V8 intake manifold and provides a convenient mounting point for the transmission kickdown bracket. Note: No further discounts apply.

H2045

.................................................. 14.99 ea

Note: No further discounts apply.

Manual Choke Cable

H202

set of four ................................. 13.99 set

This cable can be used with all manual choke Holley carburetors. Cable length is 6 feet and the control knob has the Holley name prominently displayed. Note: No further discounts apply.

H45228

6 ft length................................ 19.99 ea

Holley Transmission Kickdown Stud Install your Holley carburetor and hook it up right with this transmission kickdown stud. Note: No further discounts apply. H10897

TH700-R4 Trans. Cable Bracket This bracket is designed to be for Holley 4150 and 4160 square bore carburetors only. It bolts onto the carburetor flange ear and provides a convenient mounting point for transmission and throttle cable. Note: No further discounts apply.

H2095

.................................................. 24.99 ea

H2040

These fuel resistant O-rings will help prevent dangerous fuel leaks at your carburetors fuel transfer tube. Both old and new style O-rings are available. Note: No further discounts apply.

H2637 H10897

old style .................................. new style .................................

5.99 pr 6.99 pr

Fuel & Exhaust L

Float Adjustment Tool No more slight-of-hand tricks! Easily adjust your carburetor float level with this hand float adjustment tool. 5/8" socket and built-in screwdriver blade protects your engine and hands from fuel spray. 67443 .................................................. 29.99 ea

1967-81 Holley Fuel Inlet Nut Correct replacement fuel inlet nut for 1967-72 models with Holley carburetor and 5/16" fuel lines. K0171 1967-81 2 required ................ 16.99 ea

transmission kickdown stud ....... 9.99 ea

Transfer Tube O-Ring Seals

H34150

Holley Fuel Lines Holley Carburetor Clear Fuel Sight Plugs These kits will enable you to eyeball the carburetors fuel level without ever having to remove another sight plug. No muss, no fuss, no mess. Sold in pairs. H6057 clear fuel sight plugs ................ 9.99 pr

544

We offer chromed copper fuel lines for Holley carburetors. The hard lines are manufactured with seamless copper tubing and are double flared at the ends with 5/8"-18 inverted flare inlets. Note: No further discounts apply.

H3439 adjustable 4150 & 4500 carbs 236.99 ea H34150 4150 carbs .............................. 34.99 ea H34160 4160 carbs .............................. 34.99 ea

Holley Carburetor Components

Aluminum Power Valve Remover Tool Never damage your metering blocks again! This new aluminum power valve remover tool makes power valve removal a snap. Simply place the tool over the power valve and give it an easy turn. 67454 .................................................. 27.99 ea

Toll Free Order Line 800.854.1280

Carburetor Components Holley Carburetor Float Bowl Screws These are reproductions of the screws for Holley dual float carburetor bowls. This is a set of 8, 2-1/2" flat blade screws. A must when rebuilding your Holley dual float carburetor. 14305 .................................................. 14.99 set

H37485

Holley Carburetor Sets

Holley Carburetor Gaskets

Rebuild Sets These sets are just what you need to make your Holley carburetor perform like new again. They include new gaskets, O-rings, pumps, diaphragms, needles and seats, power valves, and detailed instructions to help you step-by-step through the rebuilding process. Note: No further discounts apply. H37720 390 CFM 4160 series carbs with vacuum secondaries .................................................... 41.99 set H37119 600 CFM 4160 series carbs with vacuum secondaries .................................................... 29.99 set H37754 750 CFM 4160 series carbs with vacuum secondaries .................................................... 36.99 set H37485 4150 double pump carbs with mechanical secondaries ................................................... 49.99 set

These are reproductions of the gaskets for Holley dual float carburetors. This is a 2 piece set consisting of the base gasket as well as the air cleaner gasket. A must when rebuilding your Holley dual float carburetor. 14306 .................................................. 4.99 pr

When your Holley carburetor is due for a performance rebuild, it’s time to get a Holley TricKit Set®. This set contains all the parts you’ll need to perform a complete rebuild on your Holley vacuum secondary or double pumper carburetor. Plus its got extra parts related to carburetor calibration that are required to accomplish a real performance tune. These include accelerator pump discharge nozzles, accelerator pump cams, vacuum secondary springs, and extra gaskets. A carburetor exploded view and detailed tuning guide are also included. This Holley Trick Kit® has it all! Note: No further discounts apply. H37933 Holley Trickit Set® ........................................................................................................... 116.99 set

Holley Carburetor Quick Change Secondary Spring Housing

H10862

Holley Carburetor Air Cleaner Gaskets This circle shaped gasket is installed between the carburetor body and the base of the air cleaner. Its a must for keeping small particles of dirt from entering your engine. They measure 5" in diameter and are available in two thicknesses.

H10851

Holley Carburetor Gaskets

Make changing your vacuum secondary spring a simple job with this quick change housing. It is simple to install on any vacuum secondary Holley carburetor. Note: No further discounts apply.

H2059

................................................. 19.99 set

Note: No further discounts apply.

We offer a selection of the most commonly needed Holley carburetor gaskets.

1256633 5" diameter H10862 5" diameter

.060" thick ........ .200" thick ........

4.99 ea 9.99 ea

Base Gasket & Studs H10851 4150 & 4160 carbs, .250" ........ H10812 4150 & 4160 carbs, 5/16" ........ Base Gasket H10858 4150 & 4160 carbs, .204" ........ H10818 4150 & 4160 carbs, 5/16" ........ H10810 4150 & 4160 carbs, 1/16" ........ H10825 4165 & Quadrejet carbs, 1/4"... Metering Block H10889 4150, 4160 & 4165 carbs ......... H10890 4150, 4160 & 4165 carbs ......... H10891 4150, 4160 & 4165 carbs ......... Fuel Bowl H10883 4150, & 4160 carbs .................. H10892 4165 carbs ................................

24.99 ea 21.99 ea 22.99 19.99 7.99 19.99

ea ea ea ea

9.99 pr 11.99 pr 11.99 pr 9.99 pr 7.99 pr

www.classicindustries.com

H2037

Holley Carburetor Throttle Studs Install your Holley carburetor and hook it up right with these throttle studs. Measurement based on diameter of throttle stud. Note: No further discounts apply.

H2037 H2038

7/32" diameter .......................... 1/4" diameter ............................

9.99 ea 6.99 ea

Holley Carburetor Secondary Spring Set This set will allow you to adjust the opening of your secondaries. Includes seven color coded springs from light to heavy. Note: No further discounts apply.

H2013

set of 7 ..................................... 14.99 set

Holley Carburetor Components

545

Fuel & Exhaust L

Note: No further discounts apply.

Carburetor Components H12565 H12140

Holley Power Valves

Holley Accelerator Pump Squirters We offer several sizes and styles of accelerator pump squirters. Choose from straight type or tube style to fit 4150, 4160, and 4500 series carburetors. All include 2 gaskets. Note: No further discounts apply.

Holley Jet Assortment Set The Holley jet assortment set is the professional way to track-tune your Holley carburetor for top performance. The set consists of two 2 each of 36 different jet sizes ranging from #64 to #99. The jets are contained in a plastic case that keep them separated and make them easily accessible. Jet sizes selected will give the broadest range of adjustment and performance for most performance carburetor applications. Note: No further discounts apply.

H36181

jet assortment set ................... 59.99 set

Straight Type H121125 .025 H121128 .028 H121131 .031 H121135 .035 H121137 .037 H121140 .040 H121142 .042 H121145 .045 Tube Type H12125 .025 H12128 .028 H12131 .031 H12135 .035 H12137 .037 H12140 .040 H12142 .042 H12145 .045

H122 47 = Holley Main Jet Size # 47

straight........................ straight........................ straight........................ straight........................ straight........................ straight........................ straight........................ straight........................

12.99 12.99 12.99 12.99 12.99 12.99 12.99 12.99

pr pr pr pr pr pr pr pr

tube............................. tube............................. tube............................. tube............................. tube............................. tube............................. tube............................. tube.............................

21.99 21.99 21.99 21.99 21.99 21.99 21.99 21.99

pr pr pr pr pr pr pr pr

H4674

Holley Main Jets

H2657

Holley jets are the professional way to track-tune your Holley carburetor for top performance. They are sold in sets of two and are available in jet sizes ranging from #40 to #110. The jets will give the broadest range of adjustment to get the most performance out of your Holley carburetor. Important: Please specify jet size at the end of the part number when ordering. See chart above for more information. Note: No further discounts apply.

Fuel & Exhaust L

Standard Flow H12525 2.5" Hg ................................ H12535 3.5" Hg ................................ H12545 4.5" Hg ................................ H12555 5.5" Hg ................................ H12565 6.5" Hg ................................ H12585 8.5" Hg ................................ H125105 10.5" Hg .............................. High Flow H125125 2.5" Hg ................................ H125135 3.5" Hg ................................ H125145 4.5" Hg ................................ H125155 5.5" Hg ................................ H125165 6.5" Hg ................................ H125185 8.5" Hg ................................ H1251005 10.5" Hg ..............................

9.99 9.99 9.99 9.99 9.99 9.99 9.99

ea ea ea ea ea ea ea

15.99 15.99 15.99 15.99 15.99 15.99 15.99

ea ea ea ea ea ea ea

Holley/AFB Carburetor Spacers

Part Number

specify jet size, #40 to #110 .....

Note: No further discounts apply.

T2063

Desired Main Jet Size

H122

The power valve is a key component of the power enrichment system of Holley performance carburetors. These power valves incorporate “power valve blowout protection”.

7.99 pr

H209

Holley Throttle Solenoid Components Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to increase engine RPM in certain conditions. The Holley bracket is designed to be used with H4674 and H2657 carburetors. The nut and solenoid are universal and can be used as replacement components for other carburetors. H4674 throttle solenoid ...................... 84.99 ea H2657 solenoid nut ............................ 7.99 ea H209 solenoid bracket ...................... 9.99 ea

Carburetor spacer kits are now available for Holley carburetors. Each kit includes mounting hardware and gaskets. Open Center T2063 3/8" tall, “Hiker” ...................... 24.99 set T2091 3/8" tall, with vacuum tube ...... 29.99 set T2094 3/8" tall, w/vacuum tube, cap ... 26.99 set T2084 1" tall ........................................ 19.99 set T2103 1" tall, w/3/8" fitting for PVC .. 19.99 set Open Center T2081 2" tall ........................................ 19.99 set Ported T2280 3/8" tall ..................................... 49.99 set T2187 1" tall, w/plug for PVC ............ 24.99 set T2048 2" tall ........................................ 19.99 set

H6506

Carburetor Needle and Seat We offer several needle and seat assemblies for Holley carburetors. The seat size determines how much fuel can flow at a certain pressure. Larger sizes flow more fuel. Tune your Holley carburetor to flow the right amount of fuel at the proper pressure with a new Viton-tipped needle and seat. Note: No further discounts apply.

H6506 H6504 H6518 H6513

546

.97 .110 .120 .97

adjustable ................... adjustable ................... adjustable ................... off road .......................

14.99 15.99 25.99 25.99

ea ea ea ea

Holley Accelerator Pump Cam Set This set will allow you to “tailor” accelerator pump performance to the engine’s actual requirements. Each cam has a different shape to give different results. The shape of each cam directly affects the accelerator pump stroke and pump capacity. A steeply rising cam shape will give a fast, heavy fuel shot right off idle. Conversely, a gentle sloping ramp will spread the pump action over a longer period of time. Note: No further discounts apply.

H2012

includes 8 pump cams ............

Holley Carburetor Components

26.99 set

Billet Choke Covers These chrome-plated choke covers enhance the appearance of dressed engines by covering the plastic choke on Edelbrock, Demon, and Holley carburetors. Each billet aluminum cover comes with a snap-in louvered insert. Available as an individual cover or as a kit with polished stainless steel conduit. 42567 choke cover ............................. 23.99 ea 42563 choke cover kit ........................ 44.99 ea

Toll Free Order Line 800.854.1280

Carburetor Parts

K0107

1968-72 Choke Sets 1967 Rochester Carburetor Repair Kit You’ve got the original carburetor but it needs work. What do you do? You get a carburetor repair kit and fix it! This OE style repair kit is fabulous for repairing minor problems associated with original Rochester carburetors. Each repair kit includes gaskets, pump, needle and seat, float gauge, guide, ball, spring and retainer. Perfect for off-the-car repair. K385 1967 MT w/2 bbl. ............. 29.99 ea

Direct Replacement Carb Main Body Replacement carburetor main body for Holley® 750 CFM (#3310) vacuum secondary carburetors. This all new main body replacement will help to enhance the look and performance of your Holley carburetor without a complete replacement. 67101C ................................................ 129.99 ea

Replace your damaged or worn choke assembly with these complete kits. Reproduced with authenticity in mind. Kits includes the cover, rod, choke spring, screw and clip on rod. Note: *With Quadrajet.

K0062 1968-69 K0106 1968-69 K0107* 1968-69 K0108* 1968-69 K0109 1970-71 K0110* 1970-72

all with Holley carb .... 396/375hp L78............ 327/350hp ................... 396/325hp or 350hp...... L78 engine .................. 396, 402 ......................

29.99 32.99 29.99 32.99 41.99 41.99

set set set set set set

HC295

1968-70 Holley Carburetor Air Cleaner Stud Correct reproduction stud used to retain the air cleaner to the carburetor. This stud is for all 1967-1970 big block models. 3747933 1968-70 .................................... 6.99 ea HC295 universal ................................... 9.99 ea

3864866

1967-72 Remote Choke Thermostat Cover ED1920

1967-89 Quadrajet Carburetor Rebuild Kits Bring your original carburetor back to original working order by replacing the crucial components with this complete rebuild kit for original or Edelbrock replacement quadrajet carburetors. Each part is manufactured to exact specifications assuring a quality part and an authentic rebuild. Includes all parts and gaskets necessary for a complete rebuild. Available for 1967-89 models. ED1920 1967-78 750 CFM ................. 49.99 kit ED1921 1975-89 795 CFM ................. 49.99 kit

1967-70 Choke Rods During a multitude of years and mechanics modifications, these choke rods can become damaged or missing. Replacing this choke rod will allow your carburetor to function correctly and keep your engine running smooth. Also includes correct attachment clip. 1256602 1967-68 327/275hp w/o smog 11.99 ea 1256602 1969 350 w/2 bbl. Rochester 11.99 ea 1256602 1970 350/400 2 bbl. w/o EEC 11.99 ea

1256604

1970-71 Carburetor Tee Connector Cap For all 1970-71 4 bbl. Holley carburetors. 3928101 1970-71 4 bbl. Holley ............

2.99 ea

1967-70 Choke Thermostat Mounting Screw T2046

Carburetor Stud Kit

This mounting screw is used to hold the thermostatic choke assembly to the intake manifold. 1256603 1967-70 ...................................

1967-72 Thermostatic Choke Coil Over many years of driving, the choke coil winding can suffer undue distortion causing incorrect operation. Will install as original and will ensure countless hours trouble free driving. E389 1967-69 Holley 4bbl............. 14.99 ea E390 1967-69 Quadrajet ................ 14.99 ea 1256604 1967 396.......................... 24.99 ea 1256652 1971-72 Z28, LT1................. 24.99 ea

1.99 ea

7034356

1967-81 Fuel Filter Spring Carburetor Adjusting Tool Easily adjusts GM C-4 carburetor idle mixture screws. Flexible shaft lets you reach hard to get at screws. Reversible bit fits double-D and hex head screws. X2776 .................................................. 14.99 ea

www.classicindustries.com

Spring assembly which fits into the Rochester carburetor body and keeps tension on the fuel filter. Choose the 1967-71 2 bbl. or 4 bbl. spring, or the 1972-81 4 bbl. spring. 2 bbl. and 4 bbl. Carburetors 7034356 1967-71 ................................... 8.99 ea 4 bbl. Carburetors 7030588 1972-81 ................................... 8.99 ea

1974-75 Rochester Carburetor Heat Baffle Carburetor heat radiation baffles for 1974-75 V8 full size models originally equipped with Rochester 4 barrel carburetors. 354310 1974-75 reproduction ............ 3.99 ea

Carburetor Parts

547

Fuel & Exhaust L

We offer a variety of stud kits to fit just about any Holley or Rochester carburetor. Each kit includes 4 studs, 4 nuts and 4 washers. T2046 1-3/8" kit .................................... 3.99 set T2047 2" kit ........................................... 4.99 set T2106 3" kit ........................................... 5.99 set

Reproduction remote choke thermostat covers for 1967-72 Camaro models with Rochester 4 bbl carburetors with the choke thermostat mounted to the intake manifold. 3864866 1967-70 ................................. 5.99 ea K0041 1970-72 L78, 396, 402 w/QJ . 9.99 ea

Carburetor Parts

Carburetor Adapter

EFI Fuel Return Adapter

Adapt a Holley or AFB 4 bbl. carburetor to a Quadrajet 4 bbl. manifold with this adapter plate. Includes all necessary hardware. E2696 ............................. 19.99 ea

This adapter creates a return system simply by cutting a 2-3/4" section out of any standard 2" fuel filler tube. Made from aluminum with a 3/8" fitting that points 90 degrees downward to direct fuel back to the bottom of the tank. Each set includes the adapter with two buna rubber sleeves and four stainless steel clamps for a leak proof seal. 265385 ............................. 49.99 set

1970-72 Throttle Cable Bracket Reproduction throttle cable bracket for 1970-72 Camaro models. This quality bracket is for high performance cars with a Holley carburetor. 14876 1970-72 ............... 17.99 ea

Carb Return Spring Bracket This replacement chrome universal carb return bracket is designed to replace the original bracket for most carburetors. 66180 ............................. 4.99 ea

Air Cleaner To Carb Gasket Manufactured for all small or big block engines with Holley or Rochester quadrajet 4 bbl. carburetors. 1256633 5-1/8" ................ 4.99 ea

1967-69 Servo Bracket Correct reproduction servo mounting bracket for 1967-69 models with cruise control. HC87 1967-69 ............... 89.99 ea

Carburetor Spacer Set Easily optimize the flow rates of air and fuel in your car with this modular 1" carb spacer set! Each spacer set comes with one frame and three popular inserts: open, 4-hole, and tapered 4-hole. Dial in exactly the right flow to get the most from your motor! 67160 ............................. 31.99 set

Heat Shield for Holley Carb OER® manufactured heat shield for all GM models with Holley Carburetors. This heat shield will help cool the intake charge for better performance. 3969835 with 4 bbl. ......... 32.99 ea

TC10036

Air Cleaner Base Gasket Universal Throttle Cables All Lokar throttle cables designed with a specially extruded liner for extended life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. These U-Cut-To-Fit cables are available in 36" or 48" lengths with a stainless steel inner wire. Clevis is designed without cotter pins or set screws. Includes installation instructions. Stainless 36" TC10036A ......................... 59.99 ea 48" TC30048A LS1 Ramjet ..... 69.99 ea TC50048A Vortec .............. 69.99 ea Black 36" TC10036B ......................... 64.99 ea

Morse Cable Bracket Chrome plated bracket for Holley or Quadrajet carburetor linkage plates. Can be used with part number T2333. T2334 ............................. 5.99 ea

This buna rubber air cleaner base gasket forms a positive seal between the air cleaner and the top of carburetor with a 5-1/8" neck. Designed for air cleaners with a straight lip, the gasket has a groove that fits over the lip for a superior seal against dust and debris. It can also be flipped and used on air cleaners with a rolled lip. 297331 rubber .................. 6.99 ea

K0135

1967-69 Carb Return Springs T9756

Correct reproduction carburetor return spring found on all 1969 302 and 396 models. HC89 1967 396 ........... 9.99 ea HC89 1968 302, 396 ... 9.99 ea K0135 1969 302, 396 ... 7.99 ea

L

Fuel & Exhaust

T9757

Throttle Cable Bracket Kit Carburetor Wedge Plate

Throttle Body Adapter

This aluminum spacer tilts forward 5 degrees to help keep it level. Measures .830" at its thickest point and has a dual bolt pattern for standard Holley, Carter AFB, and Edelbrock carburetors.

Now you can convert from carburetion to TBI without having to replace your manifold. This adapter bolts on any square or spread bore manifold and accepts any 43mm bore throttle body from 4.3L, 5.0L and 5.7L GM engines.

Note: Not legal for pollution controlled vehicles.

265030

548

............................. 39.99 ea

Note: No further discounts apply.

60118

Carburetor Parts

.......................... 137.99 ea

Carburetor Linkage Plate Each plate is triple chrome plated for a beautiful and custom finish. For GM cables. T2333 Holley/AFB ...... 14.99 ea

Chrome plated bracket set small block Chevy with cable type linkage. May be used with either round or square mounts. You do not have to remove the carburetor to install. Allows full adjustment. Note: Use T9757 also if you have a TH350 transmission.

Throttle Cable Bracket T9756 small block ....... Kickdown Bracket T9757 350 trans. .........

9.99 set 2.99 ea

Toll Free Order Line 800.854.1280

Fuel System Parts 1967-79 Carburetor Rod Clip Throttle Cable Kickdown Bracket

A970136A

A970138B

A970137A

A970139C

Reproduction carburetor rod to accelerator rod clip for 1967-79 Camaro models. 3962782 1967-79 ................................... 2.99 ea

Chrome throttle cable transmission kickdown bracket for vehicles with a TH350 transmission. T9757 ................................................. 2.99 ea

1985-97 Custom Throttle Body Plates Custom throttle body plates for 1985-97 Camaro models equipped with a LT1 or TPI engine. Made from billet aluminum and anodized in your choice of black, red, or blue. Includes stainless screws for installation. Designed to fit any 1985-92 TPI or 1993-97 LT1 engine.

1967-72 Universal Accelerator Throttle Rod This rod is for use when modifications will not allow the use of the original rod between the accelerator pedal lever and the carburetor. Bend and shape as needed. 14-1/2" long.

Note: Please specify color when ordering. BK5004

BK1709

Note: Not for cable operated applications.

AL124

1967-72 ..................................... 14.99 ea

1967-69 Carb & Throttle Arm Linkage Bushing Reproduction grommet and sleeve unit where the accelerator rod fits into linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your throttle rod from becoming loose or sloppy. Includes cotter pin. K521 1967-69 bushing/sleeve ......... 3.99 set

T9619

Carburetor Mount Linkage Bracket

1997-04 BBK LS1 & LS6 Intake Manifolds Boost horsepower and low end torque with this intake manifold from BBK. Designed for LS1 and LS6 engines, this intake improves the Z06 Corvette intake design with an 85mm straight through throttle inlet with rounded low-restriction intake runners to allow an 18-24 horsepower increase on a base LS1 engine. Features a titanium powder coat finish and is available in sets with BBK Power Plus series 80mm throttle bodies with cable or electronic throttle controls. Uses factory rubber o-ring gaskets and includes mounting hardware and instructions.

IROC-Z Logo A970136A 1985-92 A970136B 1985-92 A970136C 1985-92 Z28 Logo A970137A 1985-97 A970137B 1985-97 A970137C 1985-97 Bowtie Logo A970138A 1985-97 A970138B 1985-97 A970138C 1985-97 SS Logo A970139A 1993-97 A970139B 1993-97 A970139C 1993-97

black ..................... 24.99 ea red ........................ 24.99 ea blue....................... 24.99 ea black ..................... 24.99 ea red ........................ 24.99 ea blue....................... 24.99 ea black ..................... 24.99 ea red ........................ 24.99 ea blue....................... 24.99 ea black ..................... 24.99 ea red ........................ 24.99 ea blue....................... 24.99 ea

Note: No further discounts apply.

BK5004 1997-04 manifold only ........ 499.99 ea BK5005 1997-04 w/cable TB ............ 799.99 set BK5006 1997-04 w/electronic TB ..... 799.99 set

1998-02 BBK LS1 & LS6 Throttle Body BBK LS1 and LS6 throttle bodies are designed to increase airflow on 1998-02 models to add between 7-12 horsepower. These throttle bodies are CNC machined from quality castings and feature OEM die-stamped linkages, double sealed bearings, o-ringed throttle shafts and include new gaskets with detailed instructions with all parts and necessary hardware for installation. Note: No further discounts apply

BK1709 1998-02 80mm..................... 309.99 ea BK1710 1998-02 85mm..................... 329.99 ea

These brightly polished, chrome plated brackets can be installed on vehicles equipped with Holley carburetors. For GM cables. T9619 manual transmission ................... 6.99 ea T9620 automatic transmission ............... 9.99 ea

TF800159

Billet TPI Throttle Cable Brackets Throttle Spring Return Sets Mounts to intake manifold on drivers side. Required by many race sanctioning bodies and a great idea for any high performance car, these intake manifold mounted throttle return spring and bracket sets provide positive throttle return. Includes chrome brackets, springs, bushings, and fastener. DC2083 Holley 2300, 2305 2 bbl.......... 11.99 set DC2083 Holley 4150, 4160 4 bbl.......... 11.99 set T2386 big block.................................. 12.99 set T2387 SB (tall for use w/carb spacers) ... 14.99 set

www.classicindustries.com

These billet aluminum cable brackets from Lokar mount to the side of your TPI intake plenum and allow you to install your throttle cables. Brackets are available with a single-hole stud for throttle only, a dual-hole stud for throttle and kickdown, and a triple-hole stud for a throttle, kickdown and cruise control cables. Your choice of brushed or polished finish. Made in USA. Brushed Aluminum TF800158 single-hole stud.................... 41.99 ea TF800159 double-hole stud .................. 41.99 ea TF800160 triple-hole stud ..................... 41.99 ea Polished Aluminum TF800161 single-hole stud.................... 79.99 ea TF800162 double-hole stud .................. 79.99 ea TF800163 triple-hole stud ..................... 79.99 ea

Perfect Flow Fuel Delivery System The Perfect Flow Fuel Delivery System is a fuel pump system designed to support up to 1000 horsepower in naturally-aspirated engines. It can also be configured as a main and secondary pump to support up to 500 horse power in situations where a redundant fuel delivery system is needed. Kit includes wiring and relays. Fittings are not included with this kit. Note: No further discounts apply.

65100

................................................ 826.99 set

Carburetor Parts

549

Fuel & Exhaust L

T2386

Exhaust Manifolds

85010

1970-81 LS Cast Iron Exhaust Manifolds 1968 Small Block Exhaust Manifolds

These Hooker cast iron exhaust manifolds are designed to hug the engine block closely so they will work with a variety of LS engine swaps or as a replacement. Their contoured shape aims exhaust gases for increased flow and performance over stock manifolds with a traditional old school look. Fits all GM LS engines up to 500 horsepower except LS7 and LS9's and have been proven to fit 1970-81 F-Bodies, 1982-88 G-Bodies, and 1968-72 A-Body vehicles. Made from hi-silicon ductile iron for years of durability and corrosion resistance. Available in a range of different finishes.

EMBB16P

There's no better feeling than knowing you’re replacing an integral part of your engine with correct reproductions! Each reproduction exhaust manifold is specifically designed to replace the original exactly, including correct part numbers cast into each manifold. This reproduction is regarded as the early style and does not include smog tube holes. Sold in pairs only for a complete replacement. E303 1968 small block ............ 351.99 pr

Important: Not C.A.R.B. certified and may not be legal for use in some states on pollution controlled vehicles. Note: No further discounts apply.

85010 85013 85011 85014 85015

as cast finish ........................... black ceramic finish ............... silver ceramic finish ............... titanium ceramic finish ........... cast iron gray ceramic finish ..

324.99 431.99 431.99 431.99 431.99

pr pr pr pr pr

EMBB17P

1968-72 Big Block Exhaust Manifolds E316

Reproduction exhaust manifolds for 1968-72 big block models. These extremely high-quality manifolds are designed and manufactured to exact original specifications including the correct casting numbers for 1968-70 models. The manifolds are also correct for 1971-72 big blocks with the exception of the casting numbers, which were different. Reproduction manifolds were “outflow” tested to ensure factory equivalent specifications. Manifolds are sold in pairs only. Without Air Injection Tube Holes EMBB16P 1968-72 big block.......... 370.99 pr With Air Injection Tube Holes EMBB17P 1968-72 big block.......... 370.99 pr

Before

A7700102

Ram's Horn Exhaust Manifolds These exhaust manifolds are based on the famous high performance small block Chevy Ram's Horn manifolds from the 1950's and 60's. Manufactured from heavy cast iron without air injection ports or alternator/generator bracket provisions. Available in raw cast iron, black ceramic, silver ceramic or with a heavy chrome finish. Includes mounting hardware and gaskets. Sold in pairs. Note: Not legal for use on pollution controlled vehicles.

A7700103 A7700102 A7700104 A7700105

raw cast manifolds .............. 139.99 chrome manifolds ............... 169.99 black ceramic manifolds ..... 199.99 silver ceramic manifolds..... 219.99

pr pr pr pr

After

L

Fuel & Exhaust

EMSB15P

1969-70 Small Block Exhaust Manifolds There's no better feeling than knowing you’re replacing an integral part of your engine with correct reproductions! Each reproduction exhaust manifold is specifically designed to replace the original exactly, including correct part numbers cast into each manifold. This reproduction is regarded as the early style and does not include smog tube holes. Used on 1969-70 small block engines. Sold in pairs only for a complete replacement. Available with or without holes for Air Injection tubes. Note: *For automatic transmission only. E316* 1969-70 w/o Air Injec. .. 359.99 pr

EMSB15P

550

1969-70

w/Air Injec. ..... 384.99 pr

Exhaust Manifolds

Cast Iron Manifold Dressing

Fenton Small Block Headers

Apply this non-toxic manifold dressing to your manifolds with a cloth and polish them to a silvery shine. One 3 ounce container will do approximately 3 sets of manifolds. Burn proof up to 1800 degrees Fahrenheit. CY1001 3 ounce can ............................ 15.99 ea

Classic Fenton cast iron small block headers split dual exhaust systems into a unique, high-flow quad exhaust system. Universal fit for 265-283, 327 & 350 cid engines. AJ5314 Fenton SB headers ................. 479.99 pr

Toll Free Order Line 800.854.1280

Exhaust Manifold Parts

1969-76 Upper Heat Stove

E246 3890382

1967-69 Exhaust Flange Correct replacement exhaust flange for big block or small block applications to secure the headpipe to the exhaust manifold. E246 1967-69 small block .............. 8.99 ea E247 1967-69 big block .................. 9.99 ea

3890689

1967-70 Headpipe Tube Extension These is the short extension pipe which slips in between the exhaust manifold and the main header pipe and supports the exhaust pipe packing gasket. This item is manufactured in original material. Small Block 3890382 1967-70 2" o.d. ...................... 12.99 ea Big Block 3890689 1967-70 2-1/4" o.d. ................ 12.99 ea

1967-75 SB Exhaust Manifold Heat Riser

1967-71 Exhaust Pipe Packing Gasket

Heat riser valves are located between the exhaust manifold and the head pipe and are used to hasten the warm up of a cold engine. A malfunctioning or frozen valve can cause loss of power or exhaust manifold damage. Fits Chevrolet small block models with 2" headpipe.

Original GM pipe packing gasket. This unit installs between the headpipe and exhaust manifold outlet. Heat-resistant gasket which helps prevent exhaust leaks. Measures 2-1/32" i.d. x 2-1/2" o.d. G5136 1967-71 .................................... 3.99 ea

Note: Images are shown from the bottom (pipe) side.

3887023 1967-75 small block .............. 59.99 ea

Exhaust manifold upper heat stove which is used with the air heat tube to preheat the air cleaner thermo-sensor. This item mounts on the RH (passenger side) exhaust manifold. The air tube is inserted into this item. For V8 models only. 338471 1969 w/TH350 ................. 8.99 ea 338471 1969 w/PG ........................ 8.99 ea 338471 1970 307, 350 ................... 8.99 ea 338471 1971 w/o 454 .................... 8.99 ea 338471 1972 w/o 402, 454 ............ 8.99 ea 338471 1973-75 w/o 454 .................... 8.99 ea 338471 1976 305, 350, 400 ........... 8.99 ea

1969-81 Lower Heat Stove This lower heat stove was originally installed on 1969-81 models. For V8 small block engines as listed. 338473 1969 w/TH350 ................. 19.99 ea 338473 1969 w/PG ........................ 19.99 ea 338473 1971 402, 454 ................... 19.99 ea 338473 1972 w/o 402, 454 ............ 19.99 ea 338473 1973-75 w/o 454 .................... 19.99 ea 338473 1977 305U, 350L.............. 19.99 ea 338473 1978-79 305U, 305G, 350L... 19.99 ea 338473 1980-81 267, 350H, 350L...... 19.99 ea

Exhaust Pipe Packing Gasket This heat-resistant gasket installs between the headpipe and exhaust manifold outlet. Measures 2" i.d. x 2-1/2" o.d. 31400 gasket ....................................... 3.99 ea

1967-70 BB Exhaust Manifold Heat Riser Heat riser valves are located between the exhaust manifold and the head pipe and are used to hasten the warm-up of a cold engine. Malfunctioning or frozen valves can cause loss of power or exhaust manifold damage. G5131 1967-70 big block 396 .......... 77.99 ea

1971-72 Engine to Exhaust Crossover Pipe Ring

1980-81 Exhaust Manifold Heat Riser

www.classicindustries.com

1978-79 Carburetor Air Heat Plate Support Support plate which is used to hold the carburetor air heat plate in place. For the following application: G7019 1978-79 w/o 250 6-cyl........... 7.99 ea

Oxygen Sensor Plug Oxygen Sensor Fitting Weld-in oxygen sensor fitting for all fuel injection systems. Note: No further discounts apply.

60406

................................................... 14.99 ea

When retrofitting a carburetor on late model engines, an oxygen sensor is not necessary. This plug seals the oxygen sensor bung on headers and exhaust manifolds. Made from trivalent chromium plated steel with a M-18 thread size to fit most stainless headers. 222734 M-18 thread plug ...................... 9.99 ea

Manifold Components

551

Fuel & Exhaust L

Replacement ring used to link the exhaust manifold to the front exhaust crossover pipe. This ring is necessary when replacing the front exhaust pipes. Measures 2" i.d. x 2-1/2" o.d. 31400 1971-72 .................................... 3.99 ea

Heat riser valves are located between the exhaust manifold and the head pipe and are used to hasten the warm-up of a cold engine. Malfunctioning or frozen valves can cause loss of power or exhaust manifold damage. E1089 1980-81 229 .......................... 116.99 ea

1970-81 Air Heat Stove Mounting Stud This is the factory stud used to mount the air heat stove to the exhaust manifold. Fits 1970 307, 1971 307, 350 and all 1976-81 models. G7020 .................................................... 7.99 ea

Exhaust Headers

1967-02 Hedman Hedders Classic Industries® stocks a full line of Hedman Hedders for 1967-02 Camaro models. These units are designed to replace the heavy restrictive factory manifolds with tubular steel manifolds to increase horsepower and torque. Includes collector and header to head gaskets, collectors, and bolts. We offer Hedman Hedders™ for or without air injection (smog tubes). Get more performance from your Camaro without breaking the bank and do it with a name you can trust in the header business "Hedman".

68270

68600

Important: Available in black only. Be sure to read the important notes listed on the bottom of this page pertaining to each header system for correct application. Note: Shipped oversize. No further discounts apply. OS1

Part#

Year

Engine

68270

1967-81

68271

1967-81

68277

Smog AT Floor MT Column MT Floor Notes

Tube Dia.

Coll Dia.

Price

Unit

D,*

1-5/8"

3"

179.99

set

F,J

1-5/8"

3"

369.99

Y

C,J

1-5/8"

3"

279.99

set

N

N

D,*

1-5/8"

3"

179.99

set

Y

N

N

Y

N

N

C,J

1-5/8"

3"

274.99

set

Y

Y

Y

D,*

1-3/4"

3"

269.99

set

N

Y

D,*

1-3/4"

3"

249.99

set

See Notes

AC

PS

AT Column

283-400

1, 6, 45, 49, 104, 121

7,26

Y

Y

Y

N

Y

283-400

4, 5, 6, 45, 49, 104, 121

7,26

Y

Y

Y

N

Y

1967-81

283-400

1, 4, 6, 49, 104, 121

7,26

Y

Y

Y

N

68600

1967-81

283-400

1,6,15,45,49,103,121

7,26

Y

Y

Y

68601

1967-81

283-400

4, 5, 6, 15, 45, 49, 103

N

68607

1967-79

283-400

1, 4, 6, 15, 49, 103, 121

7,26

Y

Y

65003

1967-69

283-400

1, 6, 45, 49, 103

26

Y

Y

67104

1970-81

283-400

1, 6, 45, 103

26

Y

Y

Y

Y

N

68197

1967-69

Y

Y

Y

Y

3"

379.99

set

396-502

1, 4, 6, 20, 49, 208

C

1-3/4"

3"

274.99

set

1967-81

396-502

1, 6, 15, 20, 45, 49, 208

Y

Y

N

Y

N

Y

D,*

1-3/4"

3"

184.99

set

68611

1967-81

396-502

4, 5, 6, 15, 20, 49, 208

Y

Y

N

Y

N

Y

F,M

1-3/4"

3"

379.99

set

68617

1967-81

396-502

1, 4, 6, 15, 20, 49, 208

Y

N

Y

N

Y

C,L

1-3/4"

65001

1967-69

396-502

1, 6, 45, 49, 208

Y

Y

N

Y

N

Y

C

2"

3"

279.99

set

65105

1970-81

396-502

1, 6, 45, 208

N

Y

Y

Y

N

Y

D,*

2"

3"

266.99

set

283-400

Y

1-5/8"

68610

Y

Y

F,J

set

3"

279.99

set

68460

1982-92

1,6,45,103,109,121,135

Y

Y

Y

Y

N

N

D,*

1-5/8"

3"

181.99

set

68470

1982-92

283-400

1, 6, 15, 45, 103, 121

Y

Y

Y

Y

N

Y

D,*

1-5/8"

3"

179.99

set

68474

1982-92

283-400 tork step

1, 6, 15, 16, 45, 103, 121

Y

Y

Y

Y

N

Y

D,*

1-1/2"-1-5/8"

3"

279.99

set

68471

1982-92

283-400

5, 6, 15, 45, 103, 121, 167

Y

Y

Y

Y

N

Y

†

1-5/8"

3"

379.99

set

68481

1982-92

283-400

4, 5, 15, 103, 121, 140, 144

Y

Y

Y

Y

N

Y

†

1-5/8"

stock 514.99

set

68534

1998-02

LS1

1, 6, 45, full length, stepped

Y

Y

N

Y

N

Y

D,*

1-5/8"-1-3/4"

3"

339.99

set

Hedman Hedder Emission Notes *) †) A) C) D)

Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a street or highway. Currently in E.O. approval processing and not currently covered by any existing E.O. number at this time. This hedder has been submitted to the California Air Resources Board for criteria and exemption approval. Pending approval, the E.O. # should be available soon. For vehicles 1964 through 1974 without A.I.R. system, considered as O.E. replacement parts when existing emission controls are not removed from vehicle. Not legal for sale or use in California.

F) J) L) M) N) X)

For vehicles 1964 through 1974 with A.I.R. system, considered as O.E. replacement parts and do not require an E.O. number, when existing emission controls are not removed from vehicle. 1975-80 265-400 cid without A.I.R., non feedback only. 1975-80 396-454 cid without A.I.R., non feedback only. 1975-80 396-454 cid non-feedback only. 1975-81 only, 50 state legal for these years. T.E.M.S. (Tubular Exhaust Manifold Systems) are 50 state legal for years listed in catalog only.

L

Fuel & Exhaust

Hedman Hedder Notes 0) 1) 4) 5) 6) 7) 15) 20) 26) 30) 31) 45) 49) 103) 104) 109)

T.E.M.S. Tubular Exhaust Manifold System Without smog injection or injection heads. Includes parts necessary to retain emission devices. (50-State). With A.I.R. system. Modification to stock exhaust required to retain catalytic converter. Will not fit 67-69 Camaro with A/C. Shortie hedder (Max. ground clearance). Not recommended for aluminum heads. 70 or later only - A/C equipped vehicles require bracket #201110. (A6 compressor). Dog leg port only. Must use non-shell motor mounts. Not legal for sale or use in California on pollution controlled motor vehicles. Will not fit Saginaw close ratio P/S with 825 power steering box, 1967-69. Will fit w/angle plug heads (Chevy alum. only) It may be necessary to remove Z bars (SS). Dual exhaust only. Limited ground clearance.

552

Exhaust Headers

121) 131) 135) 140) 144) 145) 163) 167) 203) 204) 205) 206) 208) 234)

Must modify rotary A/C bracket. Chevy engine. Transmission limited to 700R4 and TH350. Replace Y-pipe available. Complete w/Y-Pipe to single catalytic converter. Complete with dual Y-pipe to dual catalytic converter. Stepped hedder with equalizer Y-pipe. Must use 21107 oxygen sensor reducers, not supplied with hedders. Non-EGR equipped. With EGR. With precatalytic converters. Will not fit engines with precatalytic converters. Due to cylinder heads (aluminum) generation 6 engines, 502 BB Chevy will have clearance problems with some applications. Bottom of hedder flanges may hit head bolts. Notching may be necessary. Designed with additional clearance for close ratio steering boxes.

Toll Free Order Line 800.854.1280

Exhaust Headers

1967-81 Doug’s Headers Doug’s headers are carefully developed to fit each specific vehicle application. Doug’s headers are available for 1967-81 Camaro models with small block or big block V8 engines, with and without air-injection ports, and with console or column shifters. Heavyduty machined and finished header flanges, the smooth mandrel bends tubes, and a protective Metallic Ceramic Thermal Barrier Coating (MCTBC) make Doug's Headers an excellent choice for exhaust system performance.

8304

Important: These headers are intended for off-highway use only and are not designed for California vehicles with pollution control devices. Be sure to read the important notes listed on the bottom of this page pertaining to each header system for correct application. Note: Shipped oversize. OS1

265-400 Engine Smog

Tube Cell Diameter Diameter

Rectangular Port 8323 1967-69 A 1 7-8" 3-1/2" Same As Cylinder Head Port 8368 1967-69 A 1 3/4" 3" 8324 1970-81 A 1-3/4" 3" 8326 1970-81 A 1-7/8" 3-1/2" Oval Port 8375 1967-74 A 1 5/8˝-2" 2 1/2" 8304 1967-81 A 1 5/8" 3" 8308 1967-81 A 1 5/8" 3"

AC

PB

PS

AT AT MT MT See Notes Col. Floor Col. Floor

N

Y

Y Y

Y

N Y

92 ........................................... 744.99 set

N Y N

Y Y Y

Y N Y Y Y Y

Y Y Y

N Y N Y N Y

36,52,92,93 ............................ 654.99 set 92,95,96 ................................. 654.99 set 92 ........................................... 744.99 set

Y Y Y

Y Y Y

Y N Y Y Y N

Y Y Y

Y Y N N N Y

36,61,92,96,126,133 .............. 654.99 set 5,36,52,61,92,93,96,202,214 . 654.99 set 36,61,92,93,96,214 ................ 654.99 set

454061

396-502 Engine Round Port 8319 1967-69 A 2-1/8" 3-1/2" Same As Cylinder Head Port 8320 1967-69 A 2" 3 1/2" 8328 1967-69 A 1-7/8" 3-1/2" 8313 1967-74 A 1 3/4" 3" 8306 1967-81 A 1 3/4" 3"

N

Y

N Y

Y

N Y

69 ........................................... 784.99 set

Y N Y Y

Y Y Y Y

Y Y Y Y

Y Y Y Y

N N N N

69,227 .................................... 784.99 set 69 ........................................... 689.99 set 52,69,202 ............................... 654.99 set 5,52,69,202 ............................ 669.99 set

Y Y N N

Y Y N Y

Doug's Headers Notes 5) 36) 52) 61) 69) 92) 93) 95) 96)

Shorty design for maximum ground clearance. Fits D-Port cylinder heads including ZZ4 crate engines. Will not fit with Saginaw close ratio 825 steering box. Does not fit 67-69 Camaro with A/C Big block frame stands and motor mounts must be used to insure proper engine location and header fit. Will fit most angle plug heads including factory Chevrolet “Bow-Tie” heads. Requires removal or modification of locking steering columns if equipped. Reducers available with O2 sensor fittings. Installation requires a left side A/C bracket 7608. 1979 and later vehicles with short compressors can use the stock bracket.

126) Tri-Y design. 133) Does not fit with power glide transmission. 202) Will fit with Detroit Speed & Engineering front subframes with rack and pinion steering. 214) Must use non-shell type motor mounts. 227) Will fit with Saginaw close ratio 825 steering box. A) The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for pre-emission controlled motor vehicles/motor vehicle engines (pre-1974 domestic vehicles certified to California standards, pre-1974 domestic vehicles certified to federal standards and all pre-1974 foreign vehicles), per the manufacturer’s application guide.

1967-92 LS Headers These headers are designed for the LS engine mounting kits and are available in a variety of sizes and styles for 4.8L, 5.3L and 6.0L LS engines. A silver ceramic coating keeps temperatures under control and provides a great long-lasting appearance. Designed to clear the factory AC box, power steering, power brakes, crossmember, and oil pan when installed with a LS conversion kit. Made in the USA. Note: Some modification may be necessary when used with 4L80E transmissions or column shifters. Not legal on pollution controlled vehicles. No further discounts apply.

Mid Length Headers 453661 1967-69 1-3/4" ...................... 629.99 451261 1970-81 1-3/4" ...................... 629.99 457261 1982-92 1-3/4" ...................... 629.99 Long Tube Headers 453761 1967-69 1-3/4" ...................... 839.99 453961 1967-69 1-7/8" ...................... 839.99 454161 1967-69 2" ............................ 939.99 451361 1970-81 1-3/4" ...................... 839.99 451561 1970-81 1-7/8" ...................... 839.99 451761 1970-81 2" ............................ 939.99 457361 1982-92 1-3/4" ...................... 839.99 457561 1982-92 1-7/8" ...................... 839.99 457761 1982-92 2" ........................... 939.99 Stepped Long Tube Headers 453861 1967-69 1-3/4 to 1-7/8" ........ 939.99 454061 1967-69 1-7/8" to 2" ............. 939.99 451461 1970-81 1-3/4" to 1-7/8"....... 939.99 451661 1970-81 1-7/8" to 2" ............. 939.99 457461 1982-92 1-3/4" to 1-7/8"....... 939.99 457661 1982-92 1-7/8" to 2" ............ 939.99

set set set set set set set set set set set set set set set set set set

P1044

1967-69 Borla Stainless Steel Headers Get the power and torque you've been looking for! These Borla headers provide maximum power, efficiency, and stunning looks. These headers feature 2" primary tubes and 3" collectors. Includes 2-1/2" collector adapters. Manufactured from stainless steel and backed by a 1,000,000 mile warranty. Note: Shipped oversized. No further discounts apply.

Note: Will not fit Saginaw close ratio power steering with 825 power steering box.

BA17278 1967-69

A9700106

396/427 cid......... 1249.99 set

www.classicindustries.com

1967-69

396-502 ............. 541.99 set

P1046

Pypes Header Collector Reducers These welded, 12" extended length reducers connect your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. They are constructed of polished 304 stainless steel. Limited lifetime warranty. P1044 3" header flange to 2.5" pipe .... 64.99 pr P1045 3" header flange to 3" pipe ....... 64.99 pr P1046 3.5" header flange to 3" pipe .... 64.99 pr P1047 3.5" header flange to 2.5" pipe . 64.99 pr

Exhaust Headers

553

Fuel & Exhaust L

1967-69 Camaro Pypes Big Block Headers Pypes big block headers feature large 2" primary tubes and 3.5" collectors with power spikes. Constructed of 304 mandrel bent stainless steel and fully TIG welded they include stainless collector reducers, premium hardware, and gaskets. Big block frame mounts and motor mounts must be used to ensure proper engine location and header fitment. Fits 6 speed ZF transmission and standard 5 speed Chevy 502 big block generation 6 engines with aluminum cylinder heads will have clearance problems on some applications. Bottom of header flanges may hit head bolts requiring notching to clear the bolts.

Exhaust Components

1967-76 Manifold Bolt and Stud Correct style exhaust manifold bolt and stud set will replace the rusted or broken originals. Includes 1 long bolt, 3 medium-length bolts, 7 short bolts and 1 stud. 1256623 1967-76 SB, AC .. 29.99 set

1965-72 Manifold to Pipe Stud Reproduction studs and nuts used to attach the exhaust pipes to exhaust manifold. Each set includes a complete set of studs for the installation of both exhaust manifolds. Includes 3 short and 3 long studs. K0157 1965-72 ................. 25.99 set

C=Flames D=Bow Tie

G=350 K0168

1967-69 OE Manifold Bolt Sets If you’re seeking originality for your under-hood restoration, don’t settle for anything less than this complete set of OE-type bolts and stainless steel washers to mount your exhaust manifolds. Available for small block or big block. K0168 1967-69 SB, 24 pc . 21.99 set K0092 1967 BB, 32 pc . 24.99 set

AR4111

AR1111

554

Fuel & Exhaust L

These 12 piece small head bolt sets are designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Available in both black oxide and zinc finishes. Black Oxide Hex Head 66341 3/8"-16 x 3/4" ....... 4.99 set 66342 3/8"-16 x 1" .......... 11.99 set Zinc Hex head 17970 3/8"-16 x 3/4" ....... 5.99 set 17973 3/8"-16 x 1" .......... 7.99 set

E=SS

1985-88 EGR Delete Kit EGR and cold start delete kit for 198588 Camaro models equipped with an L98 TPI 305/350. The five-piece kit allows you to delete the EGR valve and cold start injector from your TPI intake, and also includes a custom aluminum throttle body plate. The cold start delete kit includes injector delete plate and fuel rail plug. Made from 6061-T6 aluminum with a machined finish. Includes gaskets and mounting hardware. Complete EGR/Cold Start Delete Kit A9701344 1985-88 305...... 85.99 kit A9701344 1987-88 350...... 85.99 kit Cold Start Delete Kit A9701345 1985-88 305...... 36.99 kit A9701345 1987-88 350...... 36.99 kit

H=454

1978-97 Exhaust Bolt Sets Dress up your full size Chevrolet with these one-of-a kind dress-up bolt sets. The Chevrolet Bow Tie, SS or flames logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel. Note: Must specify logo prefix C=Flames, D=Bow Tie, E=SS logo.

Chrome Header Bolts 56461C 1978-87 SB ......... 19.99 set 56418C 1978-87 SB 1"..... 19.99 set 56477C 1978-87 std exh... 29.99 set 56488C 1978-87 BB ......... 29.99 set 56498C 1993-97 LT-1....... 39.99 set Stainless Steel Header Bolts 56461S 1978-87 SB ......... 24.99 set 56418S 1978-87 SB 1"..... 14.99 set 56477S 1978-87 std exh... 21.99 set 56488S 1978-87 BB ......... 21.99 set 56498S 1993-97 LT-1....... 29.99 set

Header Bolt Sets The compact 12-point nut version lets you easily slip a socket close to the pipe. Each ARP bolt set includes the specific number of parts for your application, plus premium-quality washers and hex or 12-point nuts, as required. Each small block set contains 12 bolts and each big block kit contains 16 bolts. Made in the USA. Small Block - 3/8" dia. hex head bolts AR1111 black 3/4" .... 19.99 set AR4111 stainless 3/4" .... 21.99 set AR11111 black 1" ....... 21.99 set AR41111 stainless 1" ....... 31.99 set Small Block - 3/8" dia. 12-point bolts AR1121 black 3/4" .... 15.99 set AR4121 stainless 3/4" .... 21.99 set AR11211 black 1" ....... 21.99 set AR41211 stainless 1" ....... 34.99 set Big Block - 3/8" dia. hex head bolts AR1112 black 3/4" .... 19.99 set AR4112 stainless 3/4" .... 27.99 set AR11112 black 1" ....... 26.99 set AR41112 stainless 1" ....... 42.99 set Big Block - 3/8" dia. 12-point bolts AR1122 black 3/4" .... 21.99 set AR4122 stainless 3/4" .... 27.99 set AR11212 black 1" ...... 27.99 set AR41212 stainless 1" ....... 44.99 set

66342

Small Head Header Bolt Sets

PR1027K

1967-80 Exhaust French Locks Beautiful reproduction of this commonly removed or discarded engine component. This item is necessary to help keep exhaust manifold bolts from backing-out and possibly being lost. A must for the true engine detailer. PR1027K 1967-72 BB ...... 19.99 set PR1161K 1967-80 SB ...... 19.99 set

A9701313

1993-97 LT1 Smog Plugs Billet aluminum smog/air block off plugs for 1993-97 Camaro models with a LT1. Made from 6061 aluminum and designed to plug the air injection ports in both exhaust manifolds. Note: For 1995 cars, please check your manufacture date before ordering.

67921

A9701313 1993-95 E95 ... 30.99 pr A9701312 1995-97 L95 ... 30.99 pr

67923

Aluminum Header Gasket Set Soft conforming aluminum gaskets easily conform to the header flanges for a superior seal. Each set comes with 2 gaskets 67921 SB, square port ..... 21.99 pr 67923 BB, round port ...... 29.99 pr

1968-75 Exhaust Bolts Reproduction of the exhaust manifold bolts for big block engines from 196875 These are black, hardened bolts that feature the correct flanged head, just like original. Set of 16 screws. 14312 1968-75 BB ......... 24.99 set

1993-97 LT1 EGR Block Off Kit Billet EGR block off plate kit for 199397 Camaro models equipped with a LT1. This kit includes the 3 necessary plates needed for the elimination of the EGR system. Machined from 6061 aluminum for a precise fit and clean finish. Includes gaskets and mounting hardware. A9701330 1993-97 ............. 42.99 kit

A9701335

Header Bolt Set

AK118A

Includes all original style hex head bolts for small block or big block headers. Choose from polished stainless or chrome. Small block sets include 12 bolts, and big block sets include 16 bolts. AK119A SB chrome .... 19.99 set AK119B SB stainless .. 32.99 set AK118A BB chrome .... 24.99 set AK118B BB stainless .. 40.99 set

Exhaust Hardware

1995-02 3.8L EGR Block Off EGR intake and exhaust block off plates for 1995-02 Camaro models with a 3.8L V6. This kit includes two EGR plates, one for driver side exhaust manifold and one for the intake manifold. Available with either a machined or black anodized finish. Includes installation hardware. A9701335 1995-02 ............ 48.99 kit A9701336 1995-02 black ... 48.99 kit

1987-92 L98 EGR Delete Kit EGR delete kit for 1987-92 Camaro models equipped with an L98 TPI 305/350. This EGR block off kit includes both the EGR and exhaust tube block off plates. Made from 3/8" thick 6061-T6 aluminum. Includes gaskets and mounting hardware. A9701343 1987-92 ............. 36.99 kit

Toll Free Order Line 800.854.1280

Exhaust Components 1968-72 Smog Pump Pulley

1967-93 Replacement Smog Pumps These re-manufactured smog pumps will replace the original exactly. Choose from 6 or 8-cylinder pumps. Classic Industries® offers the largest selection of smog parts anywhere! Pulley not included. 11132A 6 Cylinder 11132A 1967 ......................................................................... 104.99 ea 11113 1968-71 ......................................................................... 139.99 ea 11118 1972-79 ......................................................................... 129.99 ea V6 32241 1980 231, 3.8L .......................................................... 89.99 ea 32410 1980-81 229, 3.8L .......................................................... 89.99 ea 32406 1982-84 229, 3.8L .......................................................... 89.99 ea 32207 1981-84 231, 3.8L .......................................................... 129.99 ea V8 11110 1967 327 ................................................................... 109.99 ea 11132A 1967 283, 396, 427 ................................................... 104.99 ea 11113 1968-69 307, 327, 396, 427 ........................................... 139.99 ea 11113 1970-71 350, 400, 454, 402 ........................................... 139.99 ea 11114 1972-79 305, 350, 400, 454 ........................................... 134.99 ea 32207 1980-81 267, 305, 350 ................................................... 129.99 ea 32212 1982 267 ................................................................... 98.99 ea 32406 1982-84 305 w/o Police/Taxi ......................................... 89.99 ea 32207 1982-84 305 w/Police/Taxi ............................................ 129.99 ea 32207 1982 350 w/ FD stamp.............................................. 129.99 ea 32212 1982 350 w/ FC stamp .............................................. 98.99 ea 32207 1983-84 350 except w/ML stmp ..................................... 129.99 ea 32406 1983-86 350 w/ML stamp .............................................. 89.99 ea 32406 1985-86 305 ................................................................... 89.99 ea 32207 1986 307 w/o AC ...................................................... 129.99 ea 32220 1986 307 with AC ..................................................... 89.99 ea 32262 1987-88 307 w/o AC ...................................................... 89.99 ea 32257 1987-88 307 with AC ..................................................... 89.99 ea 32429 1987-88 350 ................................................................... 109.99 ea 32257 1989-90 307 ................................................................... 89.99 ea 32431 1989-93 305, 350 ........................................................... 124.99 ea

14314

A970142B

Quality reproduction of the deep groove A.I.R. (air injection reactor) pump pulley for high performance small block and big block models. Single groove, K1132 5-3/4" o.d. K1034 1968 396/325HP 94.99 ea K1036 1968 396/375HP 89.99 ea K1036 1968 Z/28 ........... 89.99 ea K1132 1969 Z/28 ........... 89.99 ea K1132 1969-70 396/375HP 89.99 ea K1132 1970-72 Z/28 ........... 89.99 ea

1969-76 Smog Diverter Elbow R34749

1967-69 Smog Tubes Also known as air injection reactor tubes (A.I.R. tubes), these reproduction smog tubes are manufactured from zinc plated steel to factory specifications with correct bends and outlets and semigloss black finish. A correct threaded outlet head is installed for easy installation of the smog pump check valves. R34748 1967 396 ........... 109.99 pr R34749 1968 302 ........... 109.99 pr R34749 1968 327 ........... 109.99 pr R34749 1968 350 ........... 109.99 pr R34750 1968 396 ........... 109.99 pr R34751 1969 302 ........... 89.99 pr R34751 1969 327 ........... 89.99 pr R34752 1969 396 no AC 89.99 pr

1982-96 Smog Pump Bracket A970143B

1998-00 LS1 EGR Block Off Kit Billet EGR smog block off plate kit for 1998-00 Camaro models equipped with an LS1.The complete kit includes one intake block off, one EGR block off plate for the RH exhaust manifold, and 2 smog block off plates for both LH and RH exhaust manifolds. Components can also be purchased separately. Offered with machined or black anodized finish. Includes gaskets and mounting hardware. Complete Kit A970140A 1998-00 plain .. 89.99 kit A970140B 1998-00 blk ..... 89.99 kit 3-Piece Exhaust Block Off Kit A970141A 1998-00 plain .. 58.99 kit A970141B 1998-00 blk ..... 58.99 kit Intake Block Off Plate A970142A* 1998-00 plain .. 30.99 ea A970142B* 1998-00 blk ..... 30.99 ea Exhaust Air-Injection Block Off Plate A970143A† 1998-02 plain .. 19.99 ea A970143B† 1998-02 blk ..... 19.99 ea Exhaust EGR Block Off Plate A970144A* 1998-00 plain .. 19.99 ea A970144B* 1998-00 blk ..... 19.99 ea

K0111

www.classicindustries.com

SH69

1967-70 Air Injection Hoses Sets include hoses to check valve on AIR tube. Correct lengths of thick walled hoses to replace missing or cracked originals. Includes 4 correct tower hose clamps for mounting. Note: *Check valve style Complete Hose Kits SH69 1969-70 SB.......... 39.99 set K0138 1969 BB ......... 32.99 set K0158 1970 BB ......... 32.99 set Hose Only 3889356 1967 396......... 29.99 ea 3902348* 1967 396......... 39.99 ea 3902348* 1967 427......... 39.99 ea

1967-96 Smog Check Valves GM replacement or reproduction of the smog pump check valve used on many 1967-96 Chevrolet models. K0111 1967-69 repro........ 59.99 ea E2041 1968-79 repro........ 15.99 ea G1809 1976 SB ........... 34.99 ea G5840 1980-93 exc. 307 ... 26.99 ea E2041 1986-90 307 .......... 15.99 ea G1809 1994-96 350 .......... 34.99 ea

1967-68 Smog Pump Belts Correct reproduction A.I.R. smog pump belts for 1967-68 Camaro models. These unique reproduction belts are designed to offer an original style replacement that includes the correct markings for an authentic and original reproduction replacement. Each belt is officially licensed by General Motors as an authentic replacement B964 1967 283/327 no AC. 31.99 ea B965 1967 283/327 AC...... 31.99 ea B966 1967 327 w/ TH400 .. 31.99 ea B967 1967 396/427 no AC. 33.99 ea B968 1967 396/427 AC...... 31.99 ea B984 1968 283/327 no AC. 31.99 ea B985 1968 283/327 AC...... 31.99 ea B986 1968 396/427 no AC. 33.99 ea B987 1968 396/427 AC...... 31.99 ea

Reproduction diverter elbow for the smog pump. This is the OEM aluminum elbow that bolts to the smog pump, and the diverter valve mounts on the opposite side. Used on most 1969-76 Chevrolet applications LS6, LS5, L78, L89, 302, 350, 396 and 454 engines. 14674 1969-76 ................ 44.99 ea

1967-68 Extension Tubes Reproduction A.I.R. extension tubes which fit in the exhaust manifold port under the main A.I.R. tube assembly. E251 1967-78 SB ......... 4.99 ea

Air Injection Eliminator Plug Correct block-off plug used when converting currently produced exhaust manifolds with holes for air injection tubes back to pre-smog usage. EMP330 all ...................... 1.19 ea

1967-79 Hose Tower Clamps Reproduction tower design smog pump hose clamp for all 1967-79 vehicles. Featuring the correct 1-1/6" diameter size. As required. 1256635 1967-79 ............. 4.99 ea

Warning: Concerning Smog Pump Pulleys Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in excess of these limits may result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body parts. Classic Industries® assumes no liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding the recommended RPM limitations.

Exhaust Hardware

555

Fuel & Exhaust L

Note: * 1 required. † 2 required

Reproduction or original GM smog pump bracket for 1969-96 models. Used to support the smog pump. Reproduction 14314 1969-75 SB .......... 41.99 ea Original GM G5749 1991-93 5.0, 5.7 ... 215.99 ea G4269 1994-96 5.7 .......... 58.99 ea

1973-75 Diverter Valve Tee Original air injection valve tee for 1973-75 models. G5135 1973-75 all........... 2.99 ea

Exhaust Components

P1011 67920

Soft Conforming Aluminum Collector Gasket Set Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts 67920 2-1/2" collector......................... 13.99 set 67927 3" collector ............................... 15.99 set 67928 3-1/2" collector......................... 19.99 set

1967-81 Pypes Manifold Down Pipes Not all performance enthusiasts use collector-style headers, so Pypes has designed 2-1/2" downpipes for log-style, rear exit exhaust manifolds to fit your Pypes header back systems. These down pipes are made from 409 stainless steel and mandrel bent 16 gauge tube that fit directly onto factory cast iron manifolds, and slip into the header back systems. Manifold flanges are already installed. Note: Shipped double oversize. OS2 Small Block Models P1006 1967-77 2.5", 3 bolt ............ 139.99 pr P1058 1978-81 2.5", 2 bolt ............ 119.99 pr Big Block Models P1011 1967-81 2.5", 3 bolt ............ 119.99 pr

F15920

1967-74 Manifold Pipes Manifold pipes designed to fit OEM exhaust manifold and facilitate the installation of a performance exhaust system. Pipes are manufactured in corrosion-resistant stainless steel. Features 2.5" tubing and a 3-bolt flange connection. Made in the USA. 16434

1967-74

1967-81 Pypes Tunnel X-Crossover Since a V8 fires alternately, exhaust exits in pulses rather than a steady flow. While one pipe is filled with pressure the other pipe is relatively pressureless, but connecting the two pipes in a Siamese pattern allows pressure to be equalized between the two tailpipes. This action allows the exhaust to pass through quicker for better breathing that increases horsepower. The Pypes crossover product line is defined by a high quality, exceptionally versatile design. They are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. Pypes tunnel X crossover fits a variety of 1967-81 Camaro models with easy installation. All crossovers are made of 409 stainless steel with dual reinforcement plates at the welds where they are needed most. All pipes are mandrel bent to allow for the maximum flow of exhaust gasses, which boosts acceleration. Limited lifetime warranty. Important: Modification to the body pan brace is required on 1967-69 convertible models. In order to utilize this X-pipe, it is necessary to either add a body pan designed to allow clearance for the X-pipe assembly, or remove the body pan and install subframe connectors. If using stock, cast iron manifolds, add a set of downpipes to connect your original manifolds to the header back system. OS1 Note: Shipped oversize.

16434

OS1

Note: Shipped oversize.

P1065

small block ........... 219.99 set

P1065 P1067

1967-81 1967-81

2-1/2" ................... 139.99 ea 3" .......................... 161.99 ea

Universal Balance Pipe Set Flowmaster offers a pre-fabricated universal balance pipe set to ease the installation of a crossover pipe in a dual-exhaust system. Set includes T-pipe connectors, balance pipe and clamps. F15920 2.5" ........................................... 74.99 set

P1077

16447

1967-81 Pypes X-Crossover Dump Legs

10792

10781

These dump legs replace the front legs of the X-pipe crossover. Strategically located for maximum ground clearance. All dump legs include block-off plates and hardware. Manufactured in 409 stainless steel with mandrel bends to allow for the maximum flow of exhaust gasses. P1077 1967-81 2-1/2" ................... 114.99 set P1078 1967-81 3" .......................... 124.99 set

10778

L

Fuel & Exhaust

Tru-X & Y Pipes

16450

1975-89 Manifold Y-Pipes These Y-pipes are manufactured in 100% stainless steel and designed to complement cross-member back exhaust systems. Mates to OEM manifolds and fits to 2.5" tubes. Made in the USA. 16447 1975-79 small block .......... 289.99 ea 16450 1986-89 small block .......... 199.99 ea

556

Exhaust Components

The more gentle radius of these x and y pipes allow for better exhaust gas scavenging, noise cancellation and better balance between cylinder banks. The result is a significant increase in power and torque, but a reduction in db sound levels. X-Pipe 10781 2-1/2" dual in/out x 9.5" long.. 109.99 ea 10782 3" dual in/out x 13.2" long ...... 114.99 ea Crossover 10790 2-1/4" dual in/out x 12" long.... 99.99 ea 10791 2-1/2" dual in/out x 12" long.... 99.99 ea 10792 3" dual x in/out x 14" long ...... 104.99 ea Y-Pipe 10748 2-1/2" single, 2" dual................ 31.99 ea 10758 2-1/2" single, 2-1/4 dual ........... 31.99 ea 10768 2-1/2" single, 2-1/2 dual ........... 31.99 ea 10778 3" single, 2-1/2 dual ................. 31.99 ea 10798 3" pipe, 3" dual......................... 31.99 ea

F15923

Header Collector Ball Flange Set This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. F15923 3.5" collector to 3" system ...... 99.99 set F15925 3" collector to 2.5" system ...... 99.99 set

Toll Free Order Line 800.854.1280

Exhaust Components

HC92

HC94

1967-69 OEM Style Muffler Clamps Correct replacement muffler clamps are designed to replace the factory originals. Each clamp includes hardware. Either 2" or 2-1/4" pipes. Standard Clamp HC92 1967-69 w/2" ......................... 9.99 ea HC93 1967-69 w/2-1/4" .................. 9.99 ea Guillotine Clamp HC94 1967-69 w/2" ......................... 9.99 ea HC95 1967-69 w/2-1/4" .................. 9.99 ea

1967-69 3" Camaro Tailpipe Set Flowmaster’s 3" mandrel-bent tailpipe set covers 196769 Camaro models. This tailpipe set is designed so you can create a mandrel-bent custom high performance exhaust for any Camaro including convertibles. Designed to exit between the tires and rear bumper on either side of the vehicle. Note: Hardware and hangers are not included.

F15822

1967-79 Replacement Style & Stainless Clamps

DF110

................................................ 136.99 set

1983-91 Direct Fit Exhaust Systems Installing a high-performance exhaust system for your later model Camaro has never been easier! This 2-1/2" direct-fit system follows the OEM routing and mounting points exactly so you don’t have to cut and weld brackets and pipes. Now you can bolt-on a complete high-performance system featuring your choice of the power boosting Super Turbo muffler or the Ultra Flo SS muffler. Important: *Except dual catalyst converter models. Note: Engine is the 8th digit of the VIN. Shipped oversize.

1967-69 Borla Dual Exhaust Give your Camaro a deep throaty growl to match its aggressive looks with a Borla high flow exhaust system. Featuring 2-1/2" mandrel-bent tubing with H-pipe and low-restriction single-flow mufflers, these systems reduce back pressure to improve performance. Use with factory exhaust manifolds or Borla headers. Manufactured from high quality stainless steel and backed by a 1,000,000 mile warranty. Note: Shipped double oversize. No further discounts apply.

BA100414 1967-69 396/427 cid ......... 1071.99 set

Super Turbo Systems DF110 1983-90 code H or E (exc HO) .. 318.99 DF111 1984-85 code G or F .................. 327.99 DF112* 1986-91 code G, F or 8 .............. 305.99 DF113 1988-91 code F or 8 w/dual cats 318.99 Ultra Flow SS Systems DF114 1983-90 code H or E (exc HO) .. 426.99 DF115 1984-85 code G or F .................. 435.99 DF116* 1986-91 code G, F or 8 .............. 413.99 DF117 1988-91 code F or 8 w/dual cats . 426.99

kit kit kit kit kit kit kit kit

1969 Exhaust Hanger Mount Plate Reproduction stamped steel exhaust hanger mount plate for 1969 Camaro models with factory dual exhaust. This bracket mounts to the frame rail providing a mounting location for the rear exhaust hanger. KW673 1969 LH ........................... 9.99 ea

43989

1967-87 Aluminized Tailpipes OEM style tail pipes which are aluminized offering a superior appearance to the coated style originals. Long-lasting and effective against salt-road winters. Note: *With dual chrome tips.

43243

ea ea ea ea ea ea ea ea ea pr ea ea ea ea ea ea ea ea

www.classicindustries.com

1983-92 Super Turbo Exhaust Components Installing a high-performance exhaust system for your later model Camaro has never been easier! This new direct-fit system has been designed to follow the OEM routing and mounting points exactly! You don’t have to cut or weld brackets and pipes to muffler bodies. Now you can bolt-on a complete high-performance system featuring your choice of the power boosting Super Turbo muffler or the Ultra Flo SS muffler. Important: Your Camaro’s engine is the 8th digit of the VIN. Note: Shipped oversize.

Intermediate Pipes 47638 1983-92 47597 1984-85 46669 1986-91 46744 1989-91 Tail Pipes 43243 1983-92 43244 1983-92

OS1

code H or E .......... 124.99 code G or F........... 139.99 code G or F........... 144.99 code F or 8, dual... 129.99

ea ea ea ea

RH ........................ 49.99 ea LH ........................ 49.99 ea

ea ea ea ea ea ea ea ea ea ea ea ea

1967-81 Original GM Exhaust Clamps Original factory replacement exhaust pipe clamps which are superior to aftermarket clamps. These clamps include the U-bolt, clamp closeout and two attachment nuts. Excellent for the "hard core" restorer. G731 1967-81 2-1/2" clamp ............ 20.99 ea

Tailpipe Expander Used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, eliminating exhaust leaks. The hex end allows the use of a combination wrench to remove clamp grooves or small imperfections, or an impact wrench to expand pipes. Imperfections are forced outward rather than forward, eliminating possible damage to component parts. No holding fixture is necessary. X3442 1-13/16" to 2-1/2" pipes .......... 34.99 ea

Exhaust and Tailpipe Cutter Cuts pipes 3/4" to 3" (19mm to 76mm) in diameter. 15 blades effectively cut pipe so only 1/4" turn is needed for complete cut. Works great in hard to reach areas. X2031 .................................................. 43.99 ea

Exhaust Components

557

Fuel & Exhaust L

Intermediate Pipes 43745 1977-81 LH ........................ 39.99 43744 1977-81 RH ........................ 39.99 Tail Pipes, Single Exhaust 43664 1970-74 .............................. 34.99 43502 1975-79 6 cylinder ............. 34.99 43502 1975-79 .............................. 34.99 43502 1980 267........................ 34.99 43502 1980-81 305........................ 34.99 Tail Pipes, Dual Exhaust E254 1967-68 LH ........................ 41.99 E253 1967-68 RH ........................ 41.99 E258 1969 RH and LH ........... 99.99 43663 1977-81 LH ........................ 59.99 43662 1977-81 RH ........................ 59.99 43821* 1977-81 LH ........................ 124.99 43822* 1977-81 RH ........................ 134.99 43831 1982-87 LH, 305H 4bbl ..... 14.99 43846 1982-87 RH, 305H 4bbl ..... 14.99 43989 1984-86 LH, 305G,F 4bbl .. 29.99 43988 1984-86 RH, 305G,F 4bbl .. 24.99

Correct replacement style clamps for 1967-79 applications. Each clamp is listed as standard style or heavy duty. 35794 Replacement Style 35408 2" clamp std 5/16" u-bolt .... 1.99 35335 2" clamp hd 3/8" u-bolt ....... 2.99 35413 2-1/4" clamp std 5/16" u-bolt .... 1.99 35336 2-1/4" clamp hd 3/8" u-bolt ....... 2.99 35337 2-1/2" clamp hd 3/8" u-bolt ....... 2.99 35794 3" clamp hd 3/8" u-bolt ....... 4.99 Stainless Steel E240 2" clamp stainless ............... 16.99 E241 2-1/4" clamp stainless ............... 19.99 E242 2-1/2" clamp stainless ............... 19.99 E243 2" clamp plated ................... 4.99 E244 2-1/4" clamp plated ................... 4.99 E245 2-1/2" clamp plated ................... 1.99

Mufflers

21536

1975-97 Dynomax Super Turbo Muffler E249

Exclusive patented flow directors channel exhaust flow and eliminate turbulence, larger diameter internal tubes for maximum flow, along with fiberglass matting that delivers a mellow, true performance sound. All aluminized materials, double-wrapped and arc-welded for longer life and sharper appearance. All universal mufflers are reversible for custom installation. 1975-97 V8 17739 2-1/2" inlet offset/dual outlet .. 104.99 ea

5" x 8" Offset/Offset V6 Muffler 100% stainless steel mirror finish muffler for V6 Camaro models. 21" overall length and body length of 14". Made in the USA. Note: Fits V6.Non reversible.

Polished Stainless Steel Muffler 14277 14" 2.5" ................................ 161.99 ea

22253

12214 22354

1967-87 Transverse Dual Exhaust Mufflers

1982-92 Terminator Muffler

Correct replacement transverse-mounted dual exhaust mufflers for 1967-86 models. With Dual Inlet 21536 1967-69 small block .............. 119.99 ea E249 1967-81 28" o.l. ..................... 84.99 ea With Single Inlet 22253 1982-87 305H w/4 bbl. .......... 91.99 ea 22354 1984-86 305G,F w/4 bbl........ 119.99 ea

Flowtech’s Terminator is constructed entirely of super-thick, black aluminized steel, fully welded for strength and durability with 3" inner pass tubes that reduce back pressure and increase horsepower like no other muffler can.

1980-81 Z-28 Muffler

Note: Dimensions: 15" x 11" x 5".

1982-92 Direct Fit 50162 2-1/2" offset/offset dual ......... 96.99 ea

F53083

Correct replacement dual-exhaust mufflers for 1980-81 Z-28 models with 305 or 350 V8. Single, offset inlet and outlet. Fits LH or RH side. 21598 1980-81 LH or RH............... 74.99 ea

L

Fuel & Exhaust

F42583

Flowmaster Transverse 80 Series Mufflers 1975-97 Dynomax Ultra Flo SS Muffler Uses a unique straight through design that maximizes flow and power. Made from all stainless steel materials for corrosion resistance. Includes high chromium content, high-luster T-304 cover and heads. Continuous perf design maximizes sound absorption, minimizes turbulence and gives a deep powerful true performance sound. All universal mufflers are reversible for custom installation. 1975-97 V8; 1983-92 V6 17266 2-1/2" inlet offset/dual outlet .. 229.99 ea

558

Mufflers

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. It provides an aggressive muscle car sound both inside and outside the vehicle. A replacement for early and late model Camaro models. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. Center Inlet/Center Outlet F42582 2.5" 4" x 9.75" x 24" ....... 144.99 ea Single Inlet/Dual Outlet F42583 2.5" 4" x 9.73" x 21" ....... 119.99 ea F43083 3"/2.5" 4" x 9.73" x 21" ....... 119.99 ea F53083 3"/2.5" 5" x 10" x 23" .......... 144.99 ea

12266

Magnaflow Oval-Case Mufflers Magnaflow’s wide-open performance mufflers outflow OEM chamber style mufflers by as much as 167%! This reduces engine heat and back pressure and improves exhaust scavenging from the combustion chamber. Magnaflow minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine. Magnaflow is the straight through, wideopen performance muffler with a smooth, deep tone. Made in the USA. Stainless Steel Mufflers Center Inlet/Center Outlet 12214 14" 2" ................................... 84.99 ea 12215 14" 2.25" .............................. 84.99 ea 12216 14" 2.5" ................................ 84.99 ea 122191 14" 3" ................................... 99.99 ea Center Inlet/Offset Outlet 12224 14" 2" ................................... 79.99 ea 12225 14" 2.25" .............................. 84.99 ea 12226 14" 2.5" ................................ 84.99 ea 12229 14" 3" ................................... 99.99 ea Offset Inlet/Dual Outlet 12266 18" 2.5"/2.25"....................... 119.99 ea 12265 18" 2.5"/2.5" ........................ 119.99 ea 12267 18" 3"/2.5" ........................... 119.99 ea Polished Stainless Steel Mufflers Center Inlet/Center Outlet 142141 14" 2" ................................... 114.99 ea 142151 14" 2.25" .............................. 114.99 ea 142161 14" 2.5" ................................ 114.99 ea 142191 14" 3" ................................... 124.99 ea 141511 14" 3-1/2" ............................ 144.99 ea 141531 14" 4" ................................... 151.99 ea Offset Inlet/Dual Outlet 14266 18" 2.5"/2.25"....................... 161.99 ea 114288 18" 3"/2.5" ........................... 169.99 ea Center Inlet/Offset Outlet 142251 14" 2.25" .............................. 114.99 ea 142261 14" 2.5" ................................ 114.99 ea 142291 14" 3" ................................... 124.99 ea Offset Inlet/Offset Outlet 142351 14" 2.25" .............................. 114.99 ea 142361 14" 2.5" ................................ 114.99 ea 142391 14" 3" ................................... 124.99 ea

Toll Free Order Line 800.854.1280

Mufflers

144161

50130

Magnaflow Circular Mufflers Magnaflow circular-case mufflers. Available in two sizes and regular or mirror-finish stainless steel. Made in the USA. Stainless Steel Mufflers 4" x 4" Mufflers 10416 14" 2.5" ................................ 71.99 ea 5" x 5" Mufflers 12866 14" 2.5" ................................ 99.99 ea 12867 14" 3" ................................... 109.99 ea Polished Stainless Steel Mufflers 4" x 4" Mufflers 144161 14" 2.5" ................................ 84.99 ea 144191 14" 3" ................................... 89.99 ea 5" x 5" Mufflers 148661 14" 2.5" ................................ 114.99 ea 148671 14" 3" ................................... 124.99 ea

Universal Fit Raptor Mufflers Thrush Glasspack Mufflers Thrush mufflers have a straight-through, smoothflowing, perforated center tube design for maximum flow and power. Made of a heavy gauge shell for durability. Feature expandable bushings for custom applications. Enjoy the unmistakable sound of a Thrush glasspack muffler today.

Dynomax Universal Ultra Flo SS Mufflers Uses a unique straight through design that maximizes flow and power. Made from all stainless steel materials for corrosion resistance. Includes high chromium content, high-luster T-304 cover and heads. Continuous perf design maximizes sound absorption, minimizes turbulence and gives a deep powerful true performance sound. All universal mufflers are reversible for custom installation. Important: This muffler comes in two styles, Sport model measures 4" x 9-3/4" x 18-1/2"; Street model measures 4" x 9-3/4" x 25-1/2".

50051

24214

17282

Flowtech Terminator Mufflers Flowtech’s Terminator is constructed entirely of superthick, black aluminized steel, fully welded for strength and durability with 3" inner pass tubes that reduce back pressure and increase horsepower like no other muffler can.Dimensions: 15" x 11" x 5". Universal Fit Inlet /Outlet 50121 2-1/4" center/offset ................ 81.99 ea 50122 2-1/2" center/offset ................ 81.99 ea 50130 3" center/offset ................ 81.99 ea

Sport 17282 17271 17283 17519 Street 17289

2-1/4" 2-1/4" 2-1/2" 3"

inlet offset/center outlet.. 119.99 ea inlet offset/offset outlet .. 114.99 ea inlet offset/center outlet.. 119.99 ea inlet ctr/2-1/2" offset dual outlet 119.99 ea

2-1/2" inlet offset/center outlet.. 264.99 ea

Flowtech’s new Raptor turbo performance muffler features a unique sound rib case design and aluminized, lock seal construction. Low restriction, reduces back pressure and increases performance. Dimensions 13" x 10" x 4 1/2" with offset-inlet/center-outlet. 50050 2" .............................................. 29.99 ea 50051 2-1/4"........................................ 29.99 ea 50052 2-1/2"........................................ 29.99 ea

P1021

Note: Dimensions: overall length x shell length x shell diameter:

24200 24202 24204 24201 24203 24205 24214 24213

2" 2" 2" 2-1/4" 2-1/4" 2-1/4" 2-1/2" 2-1/2"

25" x 20" x 3-1/2" ...... 27" x 22" x 3-1/2" ...... 31" x 26" x 3-1/2" ...... 25" x 20" x 3-1/2" ...... 27" x 22" x 3-1/2" ...... 31" x 26" x 3-1/2" ...... 28" x 23" x 4" ............ 45" x 40" x 4" ............

39.99 39.99 44.99 44.99 39.99 44.99 39.99 64.99

ea ea ea ea ea ea ea ea

18124

Magnaflow Glass Pack Mufflers feature a free-flowing, straight-through perforated core, and Rockwool acoustical packing material to deliver a smooth, deep tone to ensure long life and no sound degradation over time. Available in sizes from 2"-3" diameter. Made in the USA. 18124 2" 22" x 18" x 3.5" ......... 69.99 ea 18134 2" 26" x 22" x 3.5" ......... 79.99 ea 18144 2" 30" x 26" x 3.5" ......... 84.99 ea 18125 2.25" 22" x 18" x 3.5" ......... 69.99 ea 18135 2.25" 26" x 22" x 3.5" ......... 79.99 ea 18145 2.25" 30" x 26" x 3.5" ......... 84.99 ea 18146 2.5" 30" x 26" x 4" ............ 89.99 ea 18129 3" 22" x 18" x 4" ............ 46.99 ea

www.classicindustries.com

Exclusive patented flow directors channel exhaust flow and eliminate turbulence, larger diameter internal tubes for maximum flow, along with fiberglass matting that delivers a mellow, true performance sound. All aluminized materials, double-wrapped and arc-welded for longer life and sharper appearance. All universal mufflers are reversible for custom installation. Important: Sport model from 2" to 2-1/2" measures 4" x 9-3/4" x 18-1/2" and 3" measures 4" x 9-3/4" x 20"; Street model measures 4" x 9-3/4" x 25-1/2".

Sport 17730 17736 17731 17732 17733 17734 17797 17744 17743 Street 17747 17767 17748 17749 17758

2" 2" 2-1/4" 2-1/4" 2-1/2" 2-1/2" 2-3/4" 3" 3"

inlet offset/center outlet.. 79.99 ea inlet offset/offset outlet .. 84.99 ea inlet offset/center outlet.. 69.99 ea inlet offset/offset outlet .. 69.99 ea inlet offset/center outlet.. 69.99 ea inlet offset/offset outlet .. 69.99 ea inlet offset/center outlet.. 109.99 ea inlet offset/center outlet.. 69.99 ea inlet offset/offset outlet .. 69.99 ea

2-1/4" 2-1/4" 2-1/2" 2-1/2" 2-1/2"

inlet center/offset outlet.. 89.99 ea inlet offset/center outlet.. 119.99 ea inlet center/offset outlet.. 89.99 ea inlet offset/offset outlet .. 99.99 ea inlet cntr/offset dual outlet.. 119.99 ea

P1030

Pypes Stainless Mufflers Pypes has learned that no one muffler design is best. Every car is different, and everyone has different requirements. Street Pro mufflers are chambered to maintain rich sound without resonance. Race Pro have a straight-through design. Violator mufflers have an internal louvered tube with mini sound deflector chambers, making it flow ike a straight through muffler but with the sound of a chambered muffler. Each muffler measures 4" x 9" x 14" long. Street Pro 409 Stainless Steel P1021 2.5" offset/offset ................... 69.99 ea P1022 2.5" offset/center .................. 69.99 ea P1023 3" offset/offset ................... 69.99 ea P1024 3" offset/center .................. 69.99 ea Race Pro 409 Stainless Steel P1029 2.5" offset/offset ................... 71.99 ea P1030 2.5" offset/center .................. 69.99 ea P1031 3" offset/offset ................... 69.99 ea Violator 409 Stainless Steel P1038 2.5" offset/offset ................... 69.99 ea P1039 2.5" offset/center .................. 69.99 ea P1040 3" offset/offset ................... 69.99 ea

Mufflers

559

Fuel & Exhaust L

Magnaflow Glasspack Mufflers

17734

Dynomax Universal Super Turbo Mufflers

Mufflers A7700144 A7700163

Dr. Gas Frame Clearance Tubes Frame clearance tubes allow you to route your exhaust through tight areas under cross-members and frame rails. They are designed with round openings and a larger-diameter low-profile oval center section that gives extra clearance without a loss of cross-sectional area or flow. Available for 2.5”, 3”, or 3.5” diameter pipe. Made in USA. A7700144 2.5" clearance tube .............. 99.99 ea A7700145 3" clearance tube .............. 109.99 ea A7700146 3.5" clearance tube .............. 119.99 ea

A7700155 A7700163

Dr. Gas SpinPro 5-Trap Low Profile Muffler A7700158

Dr. Gas FreqMod Muffler A7700147

A7700152

Dr. Gas FreqMod Heavy Duty Muffler Dr. Gas FreqMod Heavy Duty mufflers are designed for severe applications such as high horsepower engines running headers, superchargers or large single exhaust systems. The patented two stage design reduces popping and rasp for a mellow tone while maintaining a very high flow rate. Mufflers are available in high temperature black and copper colored finishes. Made in USA. 2.5" Center Inlet/Offset Outlet A7700147 black 14" x 10" x 3.5" ...... 134.99 ea A7700148 copper 14" x 10" x 3.5" ...... 139.99 ea 3" Center Inlet/Offset Outlet A7700149 black 14" x 10" x 3.5" ...... 139.99 ea A7700150 copper 14" x 10" x 3.5" ...... 144.99 ea A7700151 black 14" x 10" x 4.5" ...... 149.99 ea A7700152 copper 14" x 10" x 4.5" ...... 154.99 ea 3.5" Center Inlet/Offset Outlet A7700153 black 14" x 10" x 4.5" ...... 159.99 ea A7700154 copper 14" x 10" x 4.5" ...... 164.99 ea

Make your V-8 sound like an exotic sports car! Dr. Gas FreqMod mufflers modify the frequency to increase the pitch of your exhaust note. These compact mufflers fit most applications while offering exhaust flow comparable to the best performance mufflers. They should be used with an x-pipe for best results. Intended for extreme or race applications. Mufflers are available in high temperature black and copper colored finishes. For quieter application use Heavy Duty FreqMod mufflers. Made in USA. 2.5" Offset Inlet/Center Outlet A7700155 black 8.5" x 8.5" x 3.25" .. 129.99 ea A7700156 copper 8.5" x 8.5" x 3.25" .. 133.99 ea 3" Offset Inlet/Center Outlet A7700157 black 9.5" x 9.5" x 4.25" .. 139.99 ea A7700158 copper 9.5" x 9.5" x 4.25" .. 143.99 ea

A7700178

A7700183 A7700162

L

Fuel & Exhaust

A7700184

Dr. Gas SpinPro 4-Trap Square Muffler

Dr. Gas SpinPro Reverse Flow Muffler

The compact four-trap square muffler offers the smooth flow and throaty exhaust sound of the Dr. Gas SpinPro mufflers in a square design that fits into tight spaces. They feature an extremely rugged construction and are available in two case thicknesses with high temperature black and copper colored finishes. Made in USA. 2.5" Center Inlet/Center Outlet A7700183 black 9.5" x 9.5" x 3.25" .. 129.99 ea A7700184 copper 9.5" x 9.5" x 3.25" .. 133.99 ea 3" Center Inlet/Center Outlet A7700185 black 9.5" x 9.5" x 4.25" .. 139.99 ea A7700186 copper 9.5" x 9.5" x 4.25" .. 143.99 ea

Dr. Gas SpinPro Reverse-Flow mufflers feature inlets and outlets on the same end. Perfect for side-exit systems with Boom Tube tips or where special routing is required. They feature very rugged construction and are available in high temperature black and copper colored finishes. Made in USA. 2.5" Offset Inlet/Offset Outlet A7700159 black 11.75" x 8.75" x 3.75" 129.99 ea A7700160 copper 11.75" x 8.75" x 3.75" 134.99 ea 3" Offset Inlet/Offset Outlet A7700161 black 11.75" x 8.75" x 3.75" 129.99 ea A7700162 copper 11.75" x 8.75" x 3.75" 134.99 ea

Mufflers

A7700171

Dr. Gas SpinPro 3-Trap Muffler

A7700159

560

Only 3” thick! These mufflers produce an extremely smooth deep tone at a moderate volume level. In flow bench tests, these mufflers have shown the same performance as straight pipe of the same inlet/ outlet diameter. They feature an extremely rugged construction and are available in high temperature black and copper colored finishes. Made in USA. 2.5" Offset Inlet/Offset Outlet A7700163 black 18" x 7.5" x 3" ........ 119.99 ea A7700164 copper 18" x 7.5" x 3" ........ 124.99 ea 3" Offset Inlet/Offset Outlet A7700165 black 18" x 7.5" x 3" ........ 129.99 ea A7700166 copper 18" x 7.5" x 3" ........ 134.99 ea

These amazingly compact mufflers are very effective against rasp and popping while delivering a very smooth, deep tone. Flow rates are comparable to straight-through mufflers. Their extremely rugged construction utilizes fully welded 14 and 16 gauge aluminized steel with high-heat coatings. Available in black or a copper that looks great on rear-mount applications where mufflers are visible. Made in USA. 2" Offset Inlet/Offset Outlet A7700167 black 12" x 6.5" x 3.25" ... 99.99 ea A7700168 copper 12" x 6.5" x 3.25" ... 103.99 ea 2.5" Offset Inlet 2" Offset Outlet A7700169 black 12" x 6.5" x 3.25" ... 99.99 ea A7700170 copper 12" x 6.5" x 3.25" ... 103.99 ea 2.5" Offset Inlet/Offset Outlet A7700171 black 12" x 6.5" x 3.25" ... 99.99 ea A7700172 copper 12" x 6.5" x 3.25" ... 103.99 ea A7700173 black 12" x 6.5" x 4.25" ... 109.99 ea A7700174 copper 12" x 6.5" x 4.25" ... 113.99 ea 3" Offset Inlet 2.5"Offset Outlet A7700175 black 12" x 6.5" x 4.25" ... 109.99 ea A7700176 copper 12" x 6.5" x 4.25" ... 113.99 ea 3" Offset Inlet/Offset Outlet A7700177 black 12" x 6.5" x 4.25" ... 109.99 ea A7700178 copper 12" x 6.5" x 4.25" ... 113.99 ea 3.5" Offset Inlet 3"Offset Outlet A7700179 black 12" x 6.5" x 4.25" ... 109.99 ea A7700180 copper 12" x 6.5" x 4.25" ... 113.99 ea 3.5" Offset Inlet/Offset Outlet A7700181 black 12" x 6.5" x 4.25" ... 109.99 ea A7700182 copper 12" x 6.5" x 4.25" ... 113.99 ea

Toll Free Order Line 800.854.1280

Mufflers

A7700125

Dr. Gas Boom Tube Tips A7700110

Dr. Gas Boom Tubes Dr. Gas Boom Tubes were designed for stock car racing, and now these low-profile side-exit exhausts are available for your muscle car. Boom Tubes have no restriction and are a perfect add-on for exhaust cut-outs. Boom Tubes are fully MIG welded and can be trimmed to match your vehicle’s side profile. Untrimmed Boom Tubes measure approximately 27.5” long and are available with 2.5”, 3”, and 3.5” round inlets. From the inlet transition, they drop to a thin 1.75” thick and 8” wide with two lengthwise support ribs. Exposed exit is approximately 12” to 14” wide depending on the trim angle. Combine with Dr. Gas mufflers and x-pipe system for a one-of-a-kind exhaust sound! Made in USA. Note: Test fit before trimming. No returns accepted once Boom Tubes are trimmed or altered.

Single Boom Tubes A7700110 2.5" inlet .............................. 209.99 A7700111 3" inlet ................................. 209.99 A7700112 3.5" inlet .............................. 209.99 Boom Tube Pairs A7700113 2.5" inlet .............................. 399.99 A7700114 3" inlet ................................. 399.99 A7700115 3.5" inlet .............................. 399.99

ea ea ea

These Boom Tube Tips are similar to full-size Boom Tube, but are shorter in length for easy installation. They still have the same 8” by 1.75” compact size after the inlet transition. Tips are pre-cut at 45° to expose an 11¼” opening at the side of the car and can be trimmed to match the profile of your car. Tips are fully MIG welded and are available individually or in pairs. Boom Tube tips are approximately 23" long on the long side and 14" long on the short side and are available with 2.5”, 3”, or 3.5” round inlet pipes. Made in USA. Note: Trimmed or modified tips cannot be returned.

Single Boom Tube Tips 2.5" inlet RH exit ............... 139.99 2.5" inlet LH exit ................ 139.99 3" inlet RH exit ............... 139.99 3" inlet LH exit ................ 139.99 3.5" inlet RH exit ............... 139.99 3.5" inlet LH exit ................ 139.99 Boom Tube Tip Pairs A7700131 2.5" inlet RH & LH ............ 224.99 A7700132 3" inlet RH & LH ............ 224.99 A7700133 3.5" inlet RH & LH ............ 224.99 A7700125 A7700126 A7700127 A7700128 A7700129 A7700130

ea ea ea ea ea ea pr pr pr

pr pr pr

F842515

Flowmaster Super 10 Series Mufflers Looking for the most aggressive sound available? Flowmaster's new Super 10 series mufflers are so aggressive, they aren't recommended for street driven vehicles. Best suited to racing applications, these feature the same Delta Flow performance technology used in the highly popular Super 40 and Super 44 series Flowmaster mufflers. Manufactured from durable 409S stainless steel for long life and offered in a variety of configurations. Backed by a limited lifetime manufacturer's warranty, these short, single chamber mufflers deliver the closest thing to open pipe sound possible. If you want high impact sound, the Super 10 series mufflers are the answer. Measures 6.5" x 9.5" x 4". Note: These mufflers are recommended for off-highway use, not for street driven vehicles

F842515 F8425152 F842518 F843015 F8430152

2.5" center in/center out 2.5"/2.25" center in/dual out... 2.5" offset in/offset out . 3" center in/center out 3"/2.5" center in/dual out...

75.99 75.99 75.99 75.99 75.99

ea ea ea ea ea

A7700139 F12018409 A7700116

Dr. Gas Boom Tube Mufflers

Note: Test fit before trimming. No returns accepted once Boom Tubes are trimmed or altered.

Single Boom Tube Mufflers A7700116 2.5" inlet RH exit ............... 289.99 A7700117 2.5" inlet LH exit ................ 289.99 A7700118 3" inlet RH exit ............... 289.99 A7700119 3" inlet LH exit ................ 289.99 A7700120 3.5" inlet RH exit ............... 289.99 A7700121 3.5" inlet LH exit ................ 289.99 Boom Tube Muffler Pairs A7700122 2.5" inlet RH & LH ............ 529.99 A7700123 3" inlet RH & LH ............ 529.99 A7700124 3.5" inlet RH & LH ............ 529.99

ea ea ea ea ea ea pr pr pr

www.classicindustries.com

F12518304

Note: Welding and trimming required. Test fit before final installation. No returns accepted once products are trimmed or altered

Complete X-Pipe Crossover Sets A7700139 2.5" inlet 2.5" outlet ........... 249.99 A7700140 3" inlet 3" outlet .............. 274.99 A7700141 3" inlet 2.5" outlet ........... 289.99 A7700142 3.5" inlet 3.5" outlet ........... 299.99 A7700143 3.5" inlet 3" outlet .............. 339.99 X-Pipe Crossover Only A7700134 2.5" inlet 2.5" outlet ........... 119.99 A7700135 3" inlet 3" outlet .............. 139.99 A7700136 3" inlet 2.5" outlet ........... 169.99 A7700137 3.5" inlet 3.5" outlet ........... 154.99 A7700138 3.5" inlet 3" outlet .............. 179.99

set set set set set ea ea ea ea ea

Flowmaster’s Super HP-2 Mufflers Designed for street rods, customs and vehicles where undercarriage space is tight, the Flowmaster Super HP-2 provides the exhaust performance you need in a compact package that fits wherever you need it. The Super HP-2 has a moderate tone with the appearance, durability, and sound control to suit daily drivers, weekend cruisers, and world-class show vehicles. Available with a 409S stainless steel case or polishable 304S stainless steel case in sizes from 2", 2-1/4" and 2-1/2". Made in USA 409S Stainless Steel Case F12012409 2" 4"H x 5"W x 12"L . 114.99 ea F12018409 2" 4"H x 5"W x 18"L . 144.99 ea F12412409 2-1/4" 4"H x 5"W x 12"L . 114.99 ea F12418409 2-1/4" 4"H x 5"W x 18"L . 144.99 ea F12512409 2-1/2" 4"H x 5"W x 12"L . 114.99 ea F12518409 2-1/2" 4"H x 5"W x 18"L . 144.99 ea 304S Polishable Stainless Steel Case F12412304 2-1/4" 4"H x 5"W x 12"L . 144.99 ea F12418304 2-1/4" 4"H x 5"W x 18"L . 184.99 ea F12512304 2-1/2" 4"H x 5"W x 12"L . 144.99 ea F12518304 2-1/2" 4"H x 5"W x 18"L . 184.99 ea

Mufflers

561

Fuel & Exhaust L

Dr. Gas Boom Tube Mufflers offer the same fit as a Boom Tube, but have built-in mufflers! Perfect for low ground clearance applications while giving that great side-exit look. Boom Tube mufflers are fully MIG welded and can be trimmed to match your vehicle’s side profile. Untrimmed Boom Tube Mufflers are approximately 30" long and are available with 2.5”, 3”, or 3.5” round inlet tubes for both right and left side exit. Made in USA.

Dr. Gas Universal X-Pipe Crossover Dr. Gas designed and commercialized the x-pipe crossover in the ‘80s. X-pipes equalize exhaust system pressure imbalances while producing a scavenging effect for more power and efficiency. Exhaust note is dramatically improved to a smoother, higher-pitch note. Universal x-pipe crossover sets are available in 2.5”, 3”, 3.5”, and two special sizes with built-in reducers after the X junction. Sizes with reducers deliver enhanced torque without a horsepower loss. Complete sets include two inlet bends, the x-pipe junction, two outlet bends, and flanges with gaskets and hardware. Precision made with premium materials. Made in USA.

Mufflers

F42441

Flowmaster 40 Series Mufflers Flowmaster's original exhaust tone! This is the most “aggressive” sounding street/strip muffler that Flowmaster offers. If you’re looking for attention, this one will get you noticed. The standard 40 series has an “aggressive rumble” and will generally resonate inside the vehicle around 1800-2000 RPM, and again at 2400-2600 RPM. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability Offset Inlet/Center Outlet F42441 2.25" ...................................... 84.99 ea F42541 2.5" ........................................ 84.99 ea Offset Inlet/Offset Outlet F42443 2.25" ...................................... 84.99 ea F42543 2.5" ........................................ 84.99 ea Center Inlet/Dual Outlet F430402 3"/2.5" .................................... 84.99 ea

F842541

F52556

Flowmaster 50 Series Mufflers

Flowmaster Delta Flow 40 Mufflers This two chamber design incorporates Flowmasters patented “Delta Flow” technology. The “Delta” deflectors result in increased scavenging for better performance and reduced interior resonance over the standard 40 series with a nice growl outside the vehicle. Sounds great on late model performance cars with catalytic converters. Constructed of 16 gauge steel and fully mig-welded for maximum durability. Center Inlet/Center Outlet F842440 2.25" ..................................... 109.99 ea Offset Inlet/Center Outlet F842541 2.5" ....................................... 111.99 ea F843041 3" .......................................... 111.99 ea Center Inlet/Offset Outlet F842442 2.25" ..................................... 109.99 ea Offset Inlet/Offset Outlet F842443 2.25" ..................................... 109.99 ea F842543 2.5" ....................................... 111.99 ea

The SUV/Performance muffler is a larger version of Flowmasters 50 Series Delta Flow muffler and is specially designed for trucks, light SUVs and high horsepower vehicles. The larger H-chamber reduces interior resonance to a minimum. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. Center Inlet/Center Outlet F52555 2.5" ....................................... 141.99 ea F53055 3" .......................................... 141.99 ea Offset Inlet/Center Outlet F52556 2.5" ....................................... 141.99 ea F53056 3" .......................................... 141.99 ea Center Inlet/Offset Outlet F52557 2.5" ....................................... 141.99 ea F53057 3" .......................................... 141.99 ea Offset Inlet/Offset Outlet F52558 2.5" ....................................... 141.99 ea F53058 3" .......................................... 141.99 ea

F952546 F842453 F942545

F952445 F942448

L

Fuel & Exhaust

Flowmaster Super 40 Series Mufflers The Super 40 gives you a deeper tone that retains our classic 40 Series sound and feel. Increased flow path radius for optimum internal flow using the latest in Delta Flow technology. Flowmaster state-of-the-art robot assembly technology assures a product that exceeds OEM auto manufacturers’ specifications. To achieve such critical quality, Flowmaster performs extensive R&D at the track and in-house with our own engine and chassis dyno facilities. Flowmaster Super 40 is aluminized, black in color and is the most aggressive, deepest-sounding street two chamber muffler they’ve ever built. Enjoy some American Thunder today! Center Inlet/Center Outlet F952445 2-1/4" ..................................... 94.99 ea F952545 2-1/2" ..................................... 94.99 ea F953045 3" ........................................... 94.99 ea Offset Inlet/Center Outlet F952446 2-1/4" ..................................... 94.99 ea F952546 2-1/2" ..................................... 94.99 ea F953046 3" ........................................... 94.99 ea Center Inlet/Offset Outlet F952447 2-1/4" ..................................... 94.99 ea F952547 2-1/2" ..................................... 94.99 ea F953047 3" ........................................... 94.99 ea Offset Inlet/Offset Outlet F952448 2-1/4" ..................................... 94.99 ea F952548 2-1/2" ..................................... 94.99 ea F953048 3" ........................................... 94.99 ea

562

Mufflers

Flowmaster Super 44 Delta Flow Mufflers The Super 44 is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! The Super 44’s offer maximum performance, an improved flow path radius, and generates more torque and more power than ever before! If you really want to hear your exhaust system inside as well as outside, the Super 44 is for you! Center Inlet/Center Outlet F942445 2-1/4" ..................................... 86.99 ea F942545 2-1/2" ..................................... 86.99 ea F943045 3" ........................................... 86.99 ea Offset Inlet/Center Outlet F942446 2-1/4" ..................................... 86.99 ea F942546 2-1/2" ..................................... 86.99 ea F943046 3" ........................................... 86.99 ea Center Inlet/Offset Outlet F942447 2-1/4" ..................................... 86.99 ea F942547 2-1/2" ..................................... 86.99 ea F943047 3" ........................................... 86.99 ea Offset Inlet/Offset Outlet F942448 2-1/4" ..................................... 86.99 ea F942548 2-1/2" ..................................... 86.99 ea F943048 3" ........................................... 86.99 ea Center Inlet/Dual Outlet F9430452 3" ........................................... 86.99 ea

Flowmaster Delta Flow 50 Series This is the latest design of the 50 series muffler that utilizes Flowmasters patented “Delta Flow” technology along with an “H-Chamber” to eliminate most all interior resonance and still have that famous Flowmaster sound outside the vehicle. Constructed of 16 gauge steel and fully mig-welded for maximum durability. Center Inlet/Center Outlet F842450 2.25" ..................................... 121.99 ea Offset Inlet/Center Outlet F842451 2.25" ..................................... 124.99 ea F842551 2.5" ....................................... 124.99 ea F843051 3" .......................................... 124.99 ea Center Inlet/Offset Outlet F842452 2.25" ..................................... 124.99 ea Offset Inlet/Offset Outlet F842453 2.25" ..................................... 124.99 ea F842553 2.5" ....................................... 124.99 ea

Flowmaster Muffler Heat Shields Formed aluminum heat shield designed to mount on muffler for added protection in reducing heat radiated from mufflers and reducing interior noise. Attaches easily with included straps. Fits 5" x 10" x 17" mufflers. F51017 ................................................. 32.99 ea

Toll Free Order Line 800.854.1280

Exhaust Systems

1967-69 Chambered Exhaust System

For the last word in a correct show-car quality restoration, we offer the final solution! We stock a complete chambered exhaust systems for your early model small block or big block CE679SB Camaro. This reproduction will replace the long -ago discontinued, and highly-sought-after GM originals! Chambered exhausts were offered late in the 1969 model run and were optional on Z-28, big block or COPO Camaro models. This “free flow” exhaust system will allow your engine to properly breathe with a minimum amount of back pressure and no performance loss! Though originally available only for special engine applications, this exhaust system can be installed on any 1967-69 V8 coupe Camaro, but will not fit convertible models! Unlike the originals, these exhaust systems are manufactured with an aluminized finish for longevity. Installation set available separately.

1967-68 Dual Exhaust Hanger Set Reproduction hanger set for 1967-68 Camaro models with dual exhaust. These are the original style hangers unlike the aftermarket replacements currently being offered. 4-piece set. Zinc-plated. Note: Not for chambered exhaust. Clamps not included.

K0182

1967-68 ................................... 74.99 set

Note: Shipped truck freight.

CE678SB CE678BB CE679SB CE679BB CEH69BB

1967-68 1967-68 1969 1969 1967-69

small block big block small block big block small/big block

2" headpipe, 2" intermediate and tail pipe ................... 2-1/4" headpipe, 2" intermediate and tail pipe............. 2" headpipe, 2" intermediate and tail pipe ................... 2-1/4" headpipe, 2" intermediate and tail pipe............. hanger set includes 3 2" clamps, 2 2-1/4" clamps........

719.99 719.99 499.99 499.99 139.99

set set set set set

1969 Dual Exhaust Hanger Set Reproduction hanger set for 1969 Camaro models with dual exhaust. These are the original style hangers unlike the aftermarket replacements currently being offered. 4-piece set. Zinc-plated. Note: Not for chambered exhaust. Clamps not included.

K0183

1969

OE style ................... 74.99 set

CE1678

1967-69 Aluminized Exhaust Installation Set

AE69SB1

1967-74 Aluminized Exhaust System If you are seeking an original appearance with extended life in an exhaust system, then look no further! Classic Industries® now offers this high-quality, aluminized exhaust system. Aluminizing of exhaust pipes means the pipes may out-last the rest of your car! This system uses the correct angle cut tips with factory styled flattened tail pipes and lead pipes and a original style transverse muffler. Available for both small block and big block applications. Not available for additional discounts. Important: Aluminized exhaust kits are for coupe models only. Note: Shipped truck freight.

AE678SB3 AE678BB2 AE69SB1 AE69BB2 AE70SB1 AE70BB1

1967-68 1967-68 1969 1969 1970-74 1970-74

small block big block small block big block small block big block

2" headpipe .................................................................. 2-1/4" headpipe ............................................................ 2" headpipe .................................................................. 2-1/4" headpipe ............................................................ 2" headpipe .................................................................. 2-1/4" headpipe ............................................................

329.99 329.99 329.99 329.99 299.99 319.99

This installation will enable even the shade-tree mechanic the ability to install a complete aluminized exhaust system on 1967-69 Camaro coupes regardless of the engine size. This set includes all clamps and hangers necessary to install a full system. Note: Not for chambered exhaust.

CEI678 CEI69

1967-68 installation set ......... 85.99 set 1969 installation set.......... 85.99 set

set set set set set set

1967-69 Chambered Exhaust Hanger Set Reproduction hangers for the chambered style exhaust system. These are correct for chambered only and not for standard aluminized or stainless steel exhaust sets. CEH69BB 1967-69 all (SB/BB) ........ 139.99 set

1967-69 Stainless Steel Exhaust System When it comes to selection, Classic Industries® can’t be beat! These new stainless steel exhaust systems are not manufactured for the every-day driver. This extremely high-quality reproduction is just what a perfect restoration needs. Get years of long lasting dependability with a stainless steel exhaust system. Available for both small block and big block applications. Note: Shipped truck freight.

SE678SB1 SE678BB1 SE69SB1 SE69BB1

1967-68 1967-68 1969 1969

small block big block small block big block

2" headpipe .................................................................. 2-1/4" headpipe ............................................................ 2" headpipe .................................................................. 2-1/4" headpipe ............................................................

www.classicindustries.com

849.99 829.99 769.99 849.99

set set set set

140025

1970-73 Exhaust Hangers Reproduction exhaust hangers for 1970-73 models. 140025 1970-73 all, LH ..................... 29.99 ea 140026 1970-73 all, RH ..................... 29.99 ea

Exhaust Systems

563

Fuel & Exhaust L

SE69SB1

Performance Exhaust

P1060

11101

1970-81 Flowtech Performance Exhaust Systems

1967-81 Pypes Header Back CrossFlow System Pypes has designed a 2-1/2" crossflow system for 1967-81 Camaro models needing maximum ground clearance. The Race Pro muffler is the first maximum flow, straight through, transverse-mounted crossflow muffler system that doesn’t need to sacrifice any performance or aggressive growl to give you clearance. This system also features a horsepower freeing X-pipe designed to fit into the driveshaft tunnel, which contributes to it’s ability to glide over the nastiest speed bumps. Available in 409 stainless steel or 304 polished stainless, including X-pipe, muffler, intermediate pipes and tail pipes. Limited lifetime warranty. Important: Modification to the body pan brace is required on 1967-69 convertible models. In order to utilize this X-pipe, it is necessary to either add a body pan designed to allow clearance for the X-pipe assembly, or remove the body pan and install subframe connectors. If using stock, cast iron manifolds, add a set of downpipes to connect your original manifolds to the header back system. OS2 Note: Shipped double oversize.

P1060 P10601

1967-81 1967-81

From the makers of Holley performance products comes this great Super Street exhaust system. Get more power and sound out of your Chevy small block. Made from 2-1/4" 16-gauge, heavy-duty steel, this is a top-quality, dual exhaust system that offers the maximum in versatility. All Flowtech Super Street dual kits are designed to locate all components above the frame and feature OEM exit locations. This kit comes with your choice of the Terminator muffler or the Raptor muffler. Kits come complete with installation hardware and instructions. Note: Shipped double oversize. No further discounts apply.

11100 11101

1970-81 1970-81

OS2

with Terminator mufflers ................................ 298.99 kit with Raptor mufflers ....................................... 199.99 kit

2-1/2" 409 stainless steel - 1/4 exit ................. 529.99 set 2-1/2" 304 polished stainless - 1/4 exit........... 719.99 set

P1068S

BA140028

1984-02 Borla Cat Back Dual Exhaust Systems Get a deep, bold growl from your 3rd or 4th Gen with a Borla high flow cat-back exhaust system! Features 3" mandrel-bent tubing to reduce back pressure and improve performance. Includes muffler, connection pipes, tail pipes, chrome exhaust tips, and mounting hardware. Manufactured from high quality stainless steel and backed by a 1,000,000 mile warranty. Note: *Features 5 adjustable sound settings. AT/MT. Shipped oversize. No further discounts apply.

1967-81 Pypes Header Back Dual System With X-Pipe

L

Fuel & Exhaust

Pypes has designed a header back dual exhaust system for 1967-81 V8 models that incorporates a 16 gauge, mandrel-bent stainless steel X-pipe to maximize exhaust gas flow and boost horsepower. This system features a Siamese designed X-pipe, a pair of Street Pro, Race Pro or Violator mufflers, tailpipes, cad plated clamps and hangers. The combination of the crossover and the mufflers deliver a perfect balance of sound and performance. Features 409 stainless steel X-pipe, mufflers, intermediate pipes and tail pipes. Limited lifetime warranty.

With Chrome Dual Round 2-1/2" Angle-Cut Exhaust Tips BA14888 1984-92 5.0/5.7L....................................................... With Chrome Square Intercooled Angle-Cut Exhaust Tips BA14464* 1993-97 5.7L LT1 w/single cat ................................. BA14555* 1995-97 5.7L LT1 w/dual cat .................................... BA14780* 1998-02 5.7L LS1 ..................................................... With Chrome Single Round Angle-Cut Exhaust Tips BA140028 1998-02 5.7L LS1 .....................................................

OS1

981.99 ea 981.99 ea 981.99 ea 981.99 ea 774.99 ea

Important: Modification to the body pan brace is required on 1967-69 convertible models. In order to utilize this X-pipe, it is necessary to either add a body pan designed to allow clearance for the X-pipe assembly, or remove the body pan and install subframe connectors. If using stock, cast iron manifolds, add a set of downpipes to connect your original manifolds to the header back system. OS2 Note: Shipped double oversize.

P1068S P1068R P1068V P1069S P1069R P1069V P1019S P1019R P1019V P1020S P1020R P1020V

564

1967-69 1967-69 1967-69 1967-69 1967-69 1967-69 1970-81 1970-81 1970-81 1970-81 1970-81 1970-81

2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3"

w/Street Pro mufflers w/Race Pro mufflers w/Violator mufflers w/Street Pro mufflers w/Race Pro mufflers w/Violator mufflers w/Street Pro mufflers w/Race Pro mufflers w/Violator mufflers w/Street Pro mufflers w/Race Pro mufflers w/Violator mufflers

1/4 exit ........... 1/4 exit ........... 1/4 exit ........... 1/4 exit ........... 1/4 exit ........... 1/4 exit ........... rear exit.......... rear exit.......... rear exit.......... rear exit.......... rear exit.......... rear exit..........

Performance Exhaust

469.99 469.99 469.99 479.99 479.99 479.99 399.99 399.99 399.99 454.99 454.99 454.99

set set set set set set set set set set set set

Toll Free Order Line 800.854.1280

Performance Exhaust

15896

1967-74 Crossmember-Back Exhaust Magnaflow’s Camaro systems start with mufflers specifically designed with internal paths that ensure fast, equalized exhaust flow so that both sides flow the same. The crossmember-back systems are built with fast-flowing mandrel-bent stainless steel tubing that feature Magnaflow’s Tru-X crossover pipe. For V8 models only. Made in the USA.

1977-81 Dual Exhaust Set This set extends from the catalytic converter (when applicable) to the tailpipes. This 12-piece kit includes two Super Turbo mufflers, two intermediate pipes, two tailpipes and 6 clamps. Note: Shipped double oversize. No further discounts apply.

11106

OS2

1977-81 .................................. 404.99 set

1967-74 Dual Pipe Cross Flow Exhaust American Thunder Series dual 2-1/2" system with H-pipe assembly and a transverse mounted 80 Series Cross-Flow Delta Flow muffler. Features direct out rear stock exit tailpipes. Extends from transmission crossmember back. Not for 1967-69 convertibles. Note: Shipped double oversize.

Note: Requires modification for convertible. Shipped truck freight.

F17104

OS2

1967-74 V8 2.5" .................. 546.99 set

Dual Exhaust 15895 1967-69 2.5", transverse ...... 779.99 set 15896 1967-69 2.5" ........................ 614.99 set 15899 1967-74 3" ........................... 809.99 set

F17139

11105

1983-92 Cat-Back Exhaust Systems Cat-back systems are built with fast-flowing mandrelbent stainless steel tubing. A Magnaflow wide-open performance muffler reduces engine heat and back pressure and improves exhaust scavenging from the combustion chamber for much stronger performance. For V8 models only. Made in the USA. Note: Shipped truck freight.

168291

1983-92 2.5" dual rear exit .. 594.99 set

1982-89 Performance Exhaust Systems

1967-73 Flowmaster True Dual Exhaust

Made from 2-1/4" 16- gauge, heavy-duty steel, this is a high-quality, dual exhaust system that will add horsepower to your Chevrolet small block. This kit comes with your choice of Ultra Flo SS muffler or Super Turbo muffler. Kit comes complete with all necessary hardware and instructions.

American Thunder Series dual 2-1/2" system with H-pipe assembly and two Delta Flow mufflers. Direct out rear stock exit tailpipes. Extends from transmission crossmember back. 1969-73 tailpipes feature stainless steel tips. Not for 1967-69 convertibles.

Note: For 305 models only. Shipped double oversize. No further discounts apply.

11104 11105

OS2

1982-89 w/Ultra Flo SS ....... 481.99 kit 1982-89 w/Super Turbo ....... 391.99 kit

1986-02 Single In/Dual Out Exhaust

These systems are built with fast-flowing mandrel-bent stainless steel tubing and include long 3.5" diameter polished stainless steel tips. The Camaro V6 system is designed to look just like the V8 with split dual out tips. Magnaflow’s wide-open performance mufflers outflow OEM chamber style mufflers by as much as 167%. This reduces engine heat and back pressure and improves exhaust scavenging from the combustion chamber. Made in the USA.

American Thunder Series exhaust systems feature aluminized pipes with stainless steel tips and an 80 Series Cross-Flow Delta Flow muffler. Available for 1986-02 models.

5 x 8 x 14" muffler 639.99 set 5 x 8 x 14" muffler 554.99 set set set set set

www.classicindustries.com

Important: *With resonator. **With Y-pipe. Note: Shipped double oversize.

2.5" In-Out F17356 1993-95 F17357* 1995-97 F17133 1995-97 F17358* 1998-02 3" In - 2.5" Out F17143 1993-95 3" In-Out F17233 1986-91 F17234 1986-91 F17274 1993-95 F17199 1998-02

3.4 flanged cat. ...... 3.8 slip-fit cat. ........ 5.7 dual cat. ........... 3.8 slip-fit cat. ........

F15937

OS2

416.99 461.99 411.99 475.99

ea ea ea ea

5.7 3" cat................ 384.99 ea V8 3" cat................ V8 2.5" cat............. 5.7 3" cat................ 5.7 ..........................

491.99 431.99 519.99 474.99

ea ea ea ea

U-Fit Dual Pipe Sets These sets come complete with all the pipes you need to build a custom dual exhaust system in 2-1/4", 2-1/2" or 3" pipe diameters. These U-Fit sets include the front adapter pipes, intermediate pipes, H-pipe assembly and over-the-axle pipes. Each piece has a slip-fit connection, for easy assembly and built from mandrel bent, 16-gauge aluminized steel tubing. Important: Hardware not included. Note: Shipped double oversize.

F15935 F15936 F15937

OS2

2-1/4"...................................... 281.99 set 2-1/2"...................................... 304.99 set 3" ............................................ 324.99 set

Performance Exhaust

565

Fuel & Exhaust L

Note: *Z28 and SS models only. Shipped truck freight.

5 x 8 x 18" muffler . 501.99 5 x 8 x 18" muffler . 589.99 center quad outlet ... 949.99 dual rear exit ........... 869.99

OS2 With 44 Series Mufflers F17129 1967-68 V8 2.5" .................. 454.99 set F17139 1969 V8 2.5" .................. 565.99 set With 50 Series Mufflers F17149 1970-73 V8 2.5 .................... 594.99 set

F17357

16723

1993-02 Cat-Back Exhuast Systems

V6 Engine 15694 1993-97 15693 1998-02 5.7L V8 Engine 15620 1993-97 15684 1998-02 16846* 1998-02 16723* 1998-02

Note: Shipped double oversize.

Exhaust Cut-Outs

MN2443 MN2446

MN2450

MN2447

Pypes Electric Cutouts

MN2453

Electric Exhaust Cut-Outs Don’t crawl under your car to uncork your exhaust ever again by switching to electric cut-outs. Keep them closed and quiet for the street, wide open for the strip, or anywhere in between with the flip of a switch. You control the volume and the power! Available in sizes 2-1/4" to 4" and a low profile oval design for applications with limited ground clearance. Fits 2-1/4" to 3" round exhaust pipe. Built with high quality materials- CNC 6061 aluminum body and motor plate, stainless steel shaft and butterfly plate, high torque DC gear driven motor, weather-tight wiring connectors, and custom illuminated toggle switch.

The optional electric exhaust cutouts and make uncorking your exhaust as easy as flipping a switch. Electric cutout set includes 2 valves, wire harness, switch, mounting hardware and 2 gaskets. Limited lifetime warranty. Electric exhaust cutouts fit 2-1/2" or 3" dump legs. P1074 3" electric exhaust cutout set.. 359.99 set

Note: Match valve size with cut-out size for optimal fit and performance.

Part# MN2443 MN2444 MN2445 MN2446 MN2447 MN2448 MN2449 MN2450 MN2451 MN2452 MN2453 MN2454 MN2455 MN2456

Electric Cut- Out Valves - Individual Additional Notes ..................................................................................................... ..................................................................................................... ..................................................................................................... includes connector, fits 2-1/2" to 3" round pipe .......................... ..................................................................................................... ..................................................................................................... includes 4" three-bolt flange ....................................................... Electric Cut-Out Valve Sets two 2-1/4" valves ..................................................................................................... two 2-1/2" valves ..................................................................................................... two 3" valves ..................................................................................................... two oval valves includes connector, fits 2-1/2" to 3" round pipe .......................... two 3-1/2" valves ..................................................................................................... two 4" valves ..................................................................................................... two 4" valves includes 4" three-bolt flange ....................................................... Cut-out Size 2-1/4" valve 2-1/2" valve 3" valve oval valve 3-1/2" valve 4" valve 4" valve

MN2457

L

Fuel & Exhaust

MN2460

Price 181.99 ea 179.99 ea 179.99 ea 199.99 ea 179.99 ea 199.99 ea 219.99 ea 25054

354.99 pr 354.99 pr 354.99 pr 399.99 pr 354.99 pr 399.99 pr 439.99 pr

Doug's Stainless Steel Electric Cutouts These cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cutout is opened and closed. When fully opened, these cut-outs do not create exhaust flow obstructions that can create a leaky gasket sound, unlike butterfly-style cutouts. A pre-wired harness with an illuminated rocker switch is supplied for easy installation. Uncork your exhaust with the flip of a switch from your dash. The cut-outs are ideal for race tracks that don’t require mufflers. Cut-outs are available individually, in pairs, or in complete kits with Y-Pipes for easy installation. Made in the USA. Note: May not be legal for highway use or use on emission controlled vehicles. Important: Not recommended for vehicles equipped with catalytic converters.

MN2459

Universal Exhaust Turn-Downs Universal exhaust turn-downs for electric cutouts. The round tips feature a 360º floating flange which allows turning in any direction. Manufactured from stainless steel with a polished finish. MN2457 2-1/2" turn-down ................... 26.99 ea MN2458 3" turn down .......................... 26.99 ea MN2459 oval turn down ....................... 21.99 ea

Single Cutouts & Pairs 25052 2-1/2" single electric cutout .. 25053 2-1/2" pair electric cutouts .... 25055 3" single electric cutout .. 25056 3" pair electric cutouts .... Buy the Complete Kit and Save! 25054 2-1/2" .................................... 25057 3" ....................................

209.99 389.99 209.99 389.99

ea pr ea pr

455.99 set 439.99 set

MN2461

Stainless Steel Cut- Out Pipes Stainless steel exhaust cut-out pipes for all models. Manufactured from 304 stainless steel with a polished finish. They feature a TIG-welded construction with a 3/8" flange for a proper seal. Includes the end cap, gasket and hardware for an easy installation. MN2460 2-1/4" cutout .......................... 51.99 ea MN2461 2-1/2" cutout .......................... 51.99 ea MN2462 3" cutout ................................. 51.99 ea MN2463 3-1/2" cutout .......................... 51.99 ea MN2464 4" cutout ................................. 81.99 ea

566

Exhaust Cut-Outs

25058

Doug's Stainless Steel Cutout Turn Downs Electric Cutout Remote Control System Remote control for your electric cutout system. When space is a premium this control box gives you the flexibility you need. Includes 2 wireless key fobs for 100% control over your cutouts at the push of a button. MN2466 ................................................. 81.99 set

Easily route your cutout exhaust flow away from the floor boards or in any direction with these easilyinstalled 304 stainless steel turn downs . These turndowns are made specifically for Doug's electric cutouts and included stainless band clamps for weld free attachment . Made in the USA. 25058 2-1/2" turndown pipe ............... 34.99 ea 25059 3" turndown pipe ...................... 34.99 ea

Toll Free Order Line 800.854.1280

Exhaust Tips INC.

A P1048 F15361 B F15364 P1049

C P1050

F15362

We’ve Got A Hot Tip For You!

Flowmaster Stainless Rolled Edge Tip Stainless exhaust tip that is designed with your choice of a rolled edge or angle cut tip. Finished with an embossed Flowmaster logo. Sold individually. Clamp-On Rolled Edge Tip F15361 3" dia. for 2.5" pipe-12" L........ 51.99 ea F15363 3.5" dia. for 3" pipe - 12"L....... 49.99 ea Clamp-On Double Wall Rolled Edge Tip F15364 3.5" tip fits 2.25" pipe .............. 54.99 ea F15365 4" tip fits 2.5" pipe ................... 54.99 ea Weld-On AngleCut Tip F15362 3" dia. for 2.5" pipe-13" L........ 44.99 ea

P1051

P1052

P1053 35150 35180

35106

351471

Stainless Steel Exhaust Tips

www.classicindustries.com

These tips add the final personal touch to your custom exhaust! The extensive line of stainless steel Pypes exhaust tips will provide years of eye-popping looks and excellent durability. For 2.5" Pipes P1048 dual 3.5" splitters ................... 109.99 pr P1049 6" x 3" oval tip ....................... 79.99 pr P1050 8" x 2" rectangle tip................ 119.99 pr P1051 9" slash cut tip ........................ 34.99 pr P1052 3.5" rolled edge tip ................. 49.99 pr P1053 4" x 2" oval tip ....................... 79.99 pr P1072 2.5" long slash cut tip ............ 79.99 pr For 3" Pipes P1080 dual 3.5" splitters ................... 119.99 pr P1081 6" x 3" oval tip ....................... 79.99 pr P1082 8" x 2" rectangle tip................ 124.99 pr P1083 9" slash cut tip ........................ 39.99 pr P1084 3.5" rolled edge tip ................. 54.99 pr P1085 4" x 2" oval tip ....................... 84.99 pr P1073 3" long slash cut tip ............... 89.99 pr

C2505

C2506

ST778C

Bow Tie Exhaust Tips 8" length fits 2-1/4" pipe. Universal fit. 1/8" thick carbon steel (or 1/16" T-304 stainless steel). Choose from 2 popular finishes—triple chrome plated or stainless steel. Made in the USA. ST778C chrome plated, 8".................... 29.99 ea ST778S stainless steel, 8"..................... 54.99 ea

Chevrolet Exhaust Deflectors Add vintage style to your Chevrolet and protect your paint at the same time with these stainless steel exhaust deflectors. Exhaust deflectors clamp on the tailpipe to deflect the exhaust downward, preventing the exhaust from discoloring your chrome or paint. C2505 Bow Tie logo w/ Chevrolet ...... 14.99 ea C2506 Bow Tie logo only .................... 14.99 ea

Exhaust Tips

567

Fuel & Exhaust L

Made of T-304 stainless steel this tips will stand out on any vehicle. Made in the USA. Dual Rectangular Tips 35150 2" x 8" dia., 11" long, 2.25" I.D. 171.99 pr Turndown Tips 35179 2.5" dia., 13" long, 2.75" I.D. ... 49.99 ea 35180 3" dia., 13" long, 3" I.D. ........... 59.99 ea 15O Slash Cut Tips 35101 3" dia., 12" long, 3" O.D. ......... 34.99 ea 35102 3" dia., 18" long, 2.5" I.D. ........ 39.99 ea 35103 3" dia., 22" long, 2.5" I.D. ........ 49.99 ea 35104 3.5" dia., 12" long, 3" I.D. ........ 39.99 ea 35105 3.5" dia., 18" long, 2.5" I.D. ..... 49.99 ea 35106 3.5" dia., 22" long, 2.5" I.D. ..... 59.99 ea 35107 4" dia., 12" long, 3" I.D. ........... 44.99 ea 35108 4" dia., 18" long, 2.5" I.D. ........ 59.99 ea 35109 4" dia., 22" long, 2.5" I.D. ........ 69.99 ea 45O Slash Cut Tips 35140 3" dia., 18" long, 2.25" I.D. ...... 39.99 ea 35138 3" dia., 18" long, 2.5" I.D. ........ 41.99 ea 35141 3" dia., 22" long, 2.25" I.D. ...... 49.99 ea 35139 3" dia., 22" long, 2.5" I.D. ........ 49.99 ea 35216 3.5" dia., 18" long, 2.25" I.D. ... 39.99 ea 351431 3.5" dia., 18" long, 2.5" I.D. ..... 49.99 ea 35144 3.5" dia., 22" long, 2.5" I.D. ..... 59.99 ea 35146 4" dia., 18" long, 2.5" I.D. ........ 51.99 ea 351471 4" dia., 22" long, 2.5" I.D. ........ 69.99 ea

Pypes Stainless Exhaust Tips

Top-off your exhaust system with a handsome T-6 Billet aluminum exhaust tip. Steel slip-on mount is included to provide for easy clamp-on or weld-on installation. Available in your choice of brushed or polished finish. Exhaust clamps are sold separately. A-Ball Milled Polished 2002P 2-1/2" square fits 2".................. 49.99 ea 2001P 3" square fits 2-1/4".................. 49.99 ea 2000P 3" square fits 2-1/2".................. 49.99 ea Brushed Finish 2002B 2-1/2" square fits 2".................. 49.99 ea 2001B 3" square fits 2-1/4".................. 49.99 ea 2000B 3" square fits 2-1/2".................. 49.99 ea B-Powered By Chevrolet (Bow Tie) Polished 9002P 2-1/2" square fits 2".................. 54.99 ea 9001P 3" square fits 2-1/4".................. 54.99 ea Brushed Finish 9002B 2-1/2" square fits 2".................. 54.99 ea 9001B 3" square fits 2-1/4".................. 54.99 ea 9000B 3" square fits 2-1/2".................. 54.99 ea C-Flamed Polished 4002P 2-1/2" square fits 2".................. 54.99 ea 4001P 3" square fits 2-1/4".................. 54.99 ea 4000P 3" square fits 2-1/2".................. 54.99 ea Brushed Finish 4002B 2-1/2" square fits 2".................. 54.99 ea 4001B 3" square fits 2-1/4".................. 54.99 ea 4000B 3" square fits 2-1/2".................. 54.99 ea

Exhaust Components Exhaust Repair Kit Complete kit for repairing cracks and splits in mufflers tailpipes and exhaust pipes. Withstands temperatures over 1000° F. The kit contains ready-to-use foil packed bandage and support wire. S80334 .................................................... 2.99 ea

Muffler and Tailpipe Repair Putty and sealer seals holes and leaks in mufflers, tailpipes and around joints. Makes new installation more secure. Resists temperatures up to 2000° F. Epoxy impregnated fiberglass bandage chemically welds mufflers and tailpipes. Great for mufflers, tailpipes, joints and catalytic convertors. S80335 sealer 3 oz. tube ................... 2.99 ea S80333 putty 4 oz. pouches............. 2.99 ea S80331 bandage 84 sq. in. .................... 2.99 ea

Cool-It Plug Wire Sleeves This unique spark plug and ignition wire protector comes in four colors; red, blue, black and silver. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly-is nonflammable. Cool-It Plug Wire Sleeves can be used in any temperature environment from street vehicles to race cars. Sold in packs of 6 TT14262 black .................................... 39.99 set TT14261 red ....................................... 39.99 set TT14263 blue...................................... 31.99 set TT14260 silver.................................... 39.99 set

Reduce Under-Hood Temperatures! Socket Assist Essential tool for bolts with tight clearance like spark plugs and header bolts! 12-point for maximum finger traction. Set of three including 1/4" x 1/4", 1/4" x 3/8", 3/8" x 3/8" (12 pt x socket drive size). These belong in every tool box. 67575 3 piece set................................ 9.99 set

Dual Drive Oxygen Sensor Wrench Tool comes with both 1/2" and 3/8" drive. Attach a 1/2" breaker bar on the end of the tool to initially loosen stuck sensors. Use a 3/8" ratchet on the top for fast removal and installation. Fits oxygen sensor applications with a heat shield. Slotted body allows clearance for wire harness. Forged, heat-treated steel with six point design will withstand high torque removal applications. 12390 ................................................ 25.99 ea

Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap™ withstands continuous heat up to 2000°F, and contains no asbestos. Will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec® Thermal Conduction Technology (TCT) that conducts heat across the wrap's surface. The 1/16" thick wrap is available in 1 inch or 2 inch widths in 15' or 50' rolls. Choose from off-white or graphite black. Off-White Exhaust Wrap TT1009 1" x 15' short roll ...................... 9.99 ea TT1011 2" x 15' short roll ...................... 15.99 ea TT1010 1" x 50' long roll....................... 29.99 ea TT1012 2" x 50' long roll....................... 44.99 ea Graphite Black Exhaust Wrap TT1053 1" x 15' short roll ...................... 11.99 ea TT1054 2" x 15' short roll ...................... 19.99 ea TT1013 1" x 50' long roll, black ............ 31.99 ea TT1014 2" x 50' long roll, black ............ 49.99 ea

This Flexible Heat Shield Clips Into Place! The Header Manifold Blanket™ provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away—offering protection from abrasion and harmful liquid spills. The Header Manifold Blanket™ is available in two sizes: (2) 20" by 24" blankets for V6 & V8 applications, and (1) 36" by 40" blanket for straight 6 & 4 cylinder engines. TT1017 V6-V8 applications................. 85.99 pr TT1018 straight 6 or 4 cyl models ....... 89.99 ea

Generation II Copper Header Wrap Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by Thermo-Tec; improved Thermal-ConductionTechnology (T-C-T). Generation II Copper Exhaust Wrap creates more horsepower and reduces underhood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000ºF, contains no asbestos. TT11031 1" x 50' ..................................... 31.99 ea TT11032 2" x 50' ..................................... 54.99 ea

natural

Vermiculite Coated Header Wrap

L

Fuel & Exhaust

SS719101

High Temperature Stainless Steel Cable Tie High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temp sleeving. Available in 7-1/2" or 14-1/2" lengths. Individual SS719101 7-1/2" .................................... .99 ea SS719102 14-1/2" .................................. 1.19 ea 5 Pack SS729101 7-1/2" .................................... 4.99 kit SS729102 14-1/2" .................................. 5.99 kit 10 Pack SS729103 7-1/2" .................................... 8.99 kit SS729104 14-1-2" .................................. 10.99 kit

568

Exhaust Components

Reduce Under-Hood Temps Up to 70%! The new quick-wrap, high-velocity Exhaust Jackets™ are an innovative way to insulate and block radiant heat. The jackets cover the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This product uses Thermal Conduction Technology (TCT), developed by Thermo-Tec®, and can be applied with the headers in the vehicle. TT1015 4-6 cylinder ............................ 66.99 ea TT1016 8 cylinder ............................... 84.99 ea

Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Manufactured from texturized fiberglass yarns that are woven into a strong, flexible wrap with vermiculite coating. Resists gasoline and engine chemicals and withstands temperatures up to 1200˚ F (maximum continuous temperature of 1000˚ F). Available in black or natural in 50' or 25' rolls. 1" Header Wrap HW719301 black 1" x 50' ................ 19.99 ea HW719302 natural 1" x 50' ................ 18.99 ea HW719303 black 1" x 25' ................ 9.99 ea HW719304 natural 1" x 25' ................ 8.99 ea 2" Header Wrap HW719311 black 2" x 50' ................ 26.99 ea HW719312 natural 2" x 50' ................ 25.99 ea HW719313 black 2" x 25' ................ 16.99 ea HW719314 natural 2" x 25' ................ 15.99 ea

Toll Free Order Line 800.854.1280

Exhaust Components

TT15002

Turbo Insulating Set

TT12001

TT12002

TT12003

Hi-Heat Coating To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids. The coating also works excellent as a paint directly on metal surfaces. 11 oz. TT12001 black ...................................... 9.99 ea TT12002 aluminum .............................. 9.99 ea TT12003 copper.................................... 12.99 ea

Battery Heat Shield Excessive heat in the engine compartment will cause most standard batteries to spew or seep corrosive battery acid. Prolong battery life with the world’s only acid-neutralizing heat barrier mat. It reflects over 90% of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install. The Battery Heat Barrier™ set is completely safe to handle before and during installation. It is so effective, it is used by all branches of the United States military. Set consists of one 8" x 40" acid absorbing/neutralizing felt & one adhesive backed 8" x 40" aluminized thermal barrier to wrap around the battery, plus an 8" x 12" acid absorbing/neutralizing pad to put beneath the battery. Install one on your vehicle NOW, before it’s too late. TT1001 battery heat shield set ............ 29.99 set

TT13101

Snap Strap Quality stainless steel straps with a dependable multilock system are available in standard lengths. The narrow width, standard length straps come with the multi-lock already attached - just insert the end and pull to tighten. Standard Lengths TT13105 (6) 9" straps, (4) 18" straps ... 24.99 set TT13101 (8) 9" straps, (4) 18" straps ... 31.99 set Individual Lengths TT13150 12 pack of 9" straps ............... 31.99 set TT13160 6 pack of 18" straps ............... 24.99 set

Starter Heat Shield Set In today’s high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, we offer a non-conductive strap-on heat shield with a highlyreflective mylar surface. The Starter Heat Shield™ will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield™ is a universal set that fits all starters. TT1002 with straps ............................. 25.99 set

The Turbo Insulating Set is designed to protect and improve performance of the turbo. This universal set will help reduce turbo lag. The cut-to-fit set comes with a substantial amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications. TT15002 6 or 8 cylinder set................. 105.99 set TT15003 turbo insulation cover only .. 39.99 ea

Keep Cool! Reflect Radiant Heat Away From Your Passenger Compartment! The Muffler/Catalytic Converter Heat Shield™ is made up of woven silica with a flexible mylar finish. The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other component to reflect radiant heat away from the undercarriage of the car. The kit includes one 24" x 40" mylar heat shield and all necessary fasteners. TT1007 muffler heat shield................. 61.99 ea

TT1020

Thermo-Sleeve

www.classicindustries.com

TT11600

Clamp-On Heat Shield The flexible Clamp-On Heat Shield blocks more than 90% of damaging radiant heat from the exhaust. The high-tech composite construction provides the ultimate in protection by incorporating Thermo-ConductiveTechnology, a highly texturized silica-based fabric. Clamp-On Shields are available in 1', 2' and 3' lengths. Sets come complete with all clamps and install easily in minutes. TT11650 4" x 1 foot ............................. 31.99 set TT11660 4" x 2 foot ............................. 54.99 set TT11600 6" x 1 foot ............................. 24.99 set TT11620 6" x 2 foot ............................. 39.99 set TT11630 6" x 3 foot ............................. 49.99 set

Exhaust Components

569

Fuel & Exhaust L

Shield Plastic or Rubber Hoses & Wiring From Radiant Heat! Thermo-Shield™ protects hoses and wires from radiant heat. Unprotected, rubber hoses and plastic or rubber insulated wiring can dry out, melt or crack over time. Thermo-Shield™ is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance. Reflects radiant heat up to 2000° F. Provides a barrier against the extreme conditions that under-hood components are exposed to. Wrap your fuel lines and say good-bye to vapor lock. TT1019 1-1/2" x 15' feet ..................... 15.99 ea TT1051 2" x 50' feet ........................... 49.99 ea

Thermo-Sleeve is the combination of a high temperature fabric laminated to a highly reflective Mylar foil. It provides protection from radiant heat for hoses and wires. Thermo-Sleeve’s ultra lightweight construction provides more insulation than traditional bulky rubber-coated fiberglass. The aluminized sleeve reflects more than 90% of radiant heat, plus it is fireproof and oil resistant! Thermo-Sleeve is available in 3’ or 12’ lengths. 3' Foot Lengths TT1020 1/4" to 1/2" inside dia............ 14.99 ea TT1021 5/8" to 1" inside dia............... 16.99 ea TT1022 1-1/8" to 1-1/2" inside dia. .... 21.99 ea TT1023 1-5/8" to 2" inside dia. .......... 26.99 ea TT1024 2-1/8" to 2-1/2" inside dia. .... 31.99 ea 12' Foot Lengths TT1026 1/4" to 1/2" inside dia............ 49.99 ea TT1027 5/8" to 1" inside dia............... 69.99 ea TT1028 1-1/8" to 1-1/2" inside dia. .... 79.99 ea TT1029 1-5/8" to 2" inside dia. ......... 104.99 ea TT1030 2-1/8" to 2-1/2" inside dia. ... 114.99 ea