2015 BALE PROCESSORS

2015 BALE PROCESSORS

The Final Cut™ FPX9000 bale processor combines cutting consistency, speed and versatility to provide true fine cut capability and

Final Cut FPX9000 BALE PROCESSOR

a rapid processing time. Control when you process feed and produce an optimal material size for feed mixing purposes to increase feed efficiency in your cattle. The FPX9000 delivers a consistent cut length of 1¼" to 4" with the high-speed rotor engaged by passing through multiple cutting points. Putting 60 flails on each rotor ensures an optimal amount of contact with the bale to produce a consistent cut length from start to finish. This allows for faster mixing with the total mix ration (TMR) mixer, as well as better particle size to aid feed efficiency in your cattle. Process the amount of feed you want, when you need it. And with the optional automatic bale feed system, you can improve the efficiency of processing the bales by taking away human error. The FPX9000 is ready for windrow or bunk feeding, or processing material into a bunker or other storage item for mixing rations later. Plus, an optional powered side wall gives you the versatility to process round or square bales, or adjust material cut length by simply disengaging the highspeed rotor. Cutting consistency for increased feed efficiency. Consistent speed for quicker processing. And the versatility to control when and how you process feed. With the Final Cut FPX9000 bale processor, you have final say over how the job gets done. 1 Delivers a majority of the crop in a cut 1

length of 1¼" to 4" with the high speed rotor engaged by passing through multiple cutting points.

2|2015

BALE PROCESSORS

2

3

4

5

2 True fine cut capability. The primary rotor cuts the initial pieces of crop from the bale before delivering it to the high-speed rotor knives. The high-speed rotor then chops the crop further before sending it back through the primary rotor and ejecting it from the machine. These multiple touch-points provide consistency of cut size throughout the entire bale which speeds up mixing in a TMR and aids in better feed efficiency of your cattle.

3 Lessen the chance of unprocessed crop being fed through the machine with durable intermeshing flails on both the primary and high-speed rotor. These components produce a better consistency of processed material and help reduce twine and net buildup.

4 Speed. Bales are consistently fed into the primary rotor, reducing the need to reverse the bale rotation.

The slat and chain bale design allows for easy maintenance without the need to remove the entire rotation bed and can help reduce the need to replace bushings and bearings.

5 The optional automatic bale feed system optimizes performance and provides smooth material feeding through automatic slow down or speed up to maintain a consistent operating PTO and rotor RPM. All this happens without the operator needing to manage the feeding system.

2015

BALE

PROCESSORS

|3

Final Cut FPX9000 BALE PROCESSOR

4|2015

BALE PROCESSORS

1

2

3

1 Versatility. The Final Cut FPX9000 is ready for windrow or bunk feeding, or processing material into a bunker or other storage item for mixing rations later. An optional powered side wall allows you to process large square bales as well as big round bales.

2 Dual direct drive gearboxes provide even distribution of power to the rotors of the machine. The benefit of this design delivers greater durability and requires less maintenance.

3 A robust T-style frame has no welds or gussets at the high stress points, increasing strength and preventing cracks. The frame is bolted high on the tub for enhanced stability and durability.

2015

BALE

PROCESSORS

|5

There are two ways to design a machine. One approach is to strap your customers’ boots on and build something you assume they need. The

BPX9000 BALE PROCESSOR

other way is to let your customers wear their own boots as they tell you what’s really needed in the field. At Vermeer, we let our customers do the talking. Then, we build a machine that solves real issues. Before we set out to design the BPX9000, we listened closely to what our customers wanted and needed in a bale processor. And we kept hearing the same things. Simplicity. A bale processor that’s easier to load, operate and maintain, and can process bales smoothly and consistently. Durability. A bale processor that’s robust, heavy-duty and reliable, and is designed to maximize production. Versatility. A bale processor that can process round and large square bales of varying qualities, distribute it where and how you want it, and is easier to transport between jobs. Indeed, the BPX9000 is designed to meet the real needs of our customers. It enhances productivity and ease of operation. Operators can distribute consistent, uniform ribbons, hit tight spots along the bunk line or spread bedding evenly and consistently. And, it requires less maintenance time. 1 Process large square bales with an optional square

No more pulling the whole bed apart or spending hours cutting at net or

bale kit. Offset loader forks position the bale to the

twine wrapped around the rotor.

right hand side of the processor, and the moveable wall repositions so you can process large square

The BPX9000 bale processor was designed and built from the ground up at our manufacturing facilities in Pella, Iowa. More importantly, it’s built to be what you need it to be. Simple. Durable. Versatile.

6|2015

BALE PROCESSORS

bales. Now your round bale processor has enough

1

control to process large square bales evenly and consistently as well.

SELF-CLEANING POSITION

3

ROTOR

MANUAL CLEANING POSITION

4

5

6

3 Cutting twine off of the rotor has been among the most hated jobs – until now. The exclusive cut control bars and virtually self-cleaning rotor reduce excessive net and twine on the drum. Or, you can alter the adjustable close clearance slug bar to clean manually and minimize the amount of net or twine mixed in the feed.

4 A vertical bale lift system makes it quicker and easier to lift bales and reduces stress on

the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points, increasing strength and preventing cracks. The frame is bolted high on the tub for enhanced durability.

2

5 See the process in action right from your cab. A low front screen provides improved visibility into the tub – 2 The slat and chain bale rotation design feeds bales consistently

so you can look into the machine as it’s processing.

into the rotor – reducing the need to reverse rotation. Heavy-duty sprockets and chains ensure even misshaped bales are processed

6 A unique offset rotor rotates and pulls material through for more consistent feeding and prevents

smoothly. Long-lasting bushings replace ball bearings (from

uncontrolled fall-through from slowing down the machine. Process whole bales of varying shapes

previous Vermeer processors) that can get damaged when net or

(with optional square bale kit) and qualities to produce uniform ribbons, hit tight spots along the bunk line

twine wrap around them. Split shafts let you perform maintenance

or spread evenly up to 40' (12.2 m) for bedding.

without removing the entire bed.

2015

BALE

PROCESSORS

|7

The new CatapultTM CPX9000 bale processor gives operators the ability to process and distribute forage materials smoothly, consistently and

Catapult CPX9000 BALE PROCESSOR

accurately at long distances, making it ideal for multiple applications. This machine has the power to throw forage material up to 100 feet (30 m) in order to get up and over feed bunks in a cattle operation or for land reclamation and erosion control purposes. It also has the versatility to process round or square bales, adjust distances (from 60-100' [18-30 m] ) and control how the spout is angled and how the crop is distributed. What’s more is that the enhanced performance and ease of use of an automatic bale feed system provides smooth material feeding with limited operator assistance. It’s clear that the new Catapult CPX9000 bale processor offers a higher standard in power, versatility and ease of operation. Plus, the simplicity, durability and ease of maintenance operators have come to expect from Vermeer.

1 The automatic bale feed system optimizes productivity and provides smooth material feeding through automatic slow down or speed up to maintain a consistent operating

11

PTO and rotor RPM. All this happens without the operator needing to manage the feeding system.

8|2015

BALE PROCESSORS

Replaceable, abrasive resistant steel liner

2

3

4

2 Direct feed from a dual fan air circulation system provides consistent material flow from the tub to the spout, reducing inconsistent material flow common with non-direct feed systems.

3 Replaceable, abrasive resistant steel liners provide durability, especially needed when processing contamination-filled material like cornstalks.

4 Hydraulic controls give operators the ability to choose how the spout is angled and how the crop is distributed.

5 Optional hydraulic cut control bar kit lets operators make adjustments from the tractor cab. Use 5

the hydraulically controlled adjustment alone or in conjunction with the reversible slat and chain bed bale rotation to help mitigate tough processing conditions.

2015

BALE

PROCESSORS

|9

SPECIFICATIONS FBPX9000 PX 9000/BPX9000/ CPX9000 SPECIF ICAT IO NS FP X 9000

BPX9000

CPX9000

Length

15.8' (4.8 m)

15.6' (4.8 m)

15.6' (4.8 m)

Height

8.8' (2.7 m)

8.5' (2.6 m)

10' (3 m)

Width - transport

8.4' (2.6 m)

8.2' (2.5 m)

8.4' (2.6 m)

Width - operation

12' (3.7 m)

11.2' (3.4 m)

19.8' (6 m)

Weight

6340 lbs (2875.8 kg)

5060 lbs (2295.2 kg)

7460 lbs (3383.8 kg)

Drawbar weight

1940 lbs (880 kg)

1460 lbs (662 kg)

2500 lbs (1134 kg)

Horsepower required

110 hp (82 kW)

85 hp (63 kW)

110 hp (82 kW)

Horsepower maximum

210 hp (157 kW)

210 hp (157 kW)

210 hp (157 kW)

PTO speed

1000 rpm

1000 rpm

1000 rpm

Hydraulics type

3 - double acting

3 - double acting

2 - double acting

BPX9000 OPTIONAL FEATURES

Hydraulic pressure

2000 psi (137.9 bar)

2000 psi (137.9 bar)

2000 psi (137.9 bar)



Extra cut control bars kit

Hydraulic flow rate

10 gpm (37.9 L/min)

8 gpm (30.3 L/min)

15 gpm (56.8 L/min)



Flotation tires - 16.5L-16.1SL 6 SOFTRAC II

Axle adjustment

12" each axle

12" each axle

12" each axle

Bale rotation

3 roller chains with bolt-on cross slat

3 roller chains with bolt-on cross slat

3 roller chains with bolt-on cross slat

Bale size capacity

Two bales, 6' x 5' (1.8 x 1.5 m)

Two bales, 6' x 5' (1.8 x 1.5 m)

Two bales, 6' x 5' (1.8 x 1.5 m)

Bale weight capacity

2500 lbs (1134 kg)

2500 lbs (1134 kg)

2500 lbs (1134 kg)

Blower

N/A

N/A

Two 38.63" blower fans (1500 rpm front & 1000 rpm rear)

Cut control bar adjustment

Hand lever with 5 settings

Hand lever with 5 settings

Hand lever with 5 settings

Cut control bar quantity

7

7

7

Discharge direction

Right hand

Right hand

260°

Flail description

Dual 1/4" blade x 5 1/2"

7/16" x 5-9/16" tempered spring

7/16" x 5-9/16" tempered spring

Flail drum diameter

26.8" (68 cm)

26.8" (68 cm)

26.8" (68 cm)

Flail drum length

78" (198 cm)

78" (198 cm)

78" (198 cm)

Flail drum speed

1500 rpm

1000 rpm

1000 rpm

Flail drum quantity

60

30

30

High speed rotor flail description

3/16" x 6 11/32" reversible knives

N/A

N/A

High speed rotor diameter

22.2" (56.4 cm)

N/A

N/A

High speed rotor length

75.2" (191 cm)

N/A

N/A

High speed rotor speed

3000

N/A

N/A

High speed rotor flail quantity

60

N/A

N/A

Hitch jack

5000 lbs (2268 kg)

5000 lbs (2268 kg)

7000 lbs (3157 kg)

Horizontal spread distance

Up to 40' (12.2 m)

Up to 50' (15.2 m)

Up to 100' (30.5 m)

Safety chain kit

10000 lbs (4536 kg)

10000 lbs (4536 kg)

10000 lbs (4536 kg)

Spout length

N/A

N/A

7.9' (2.4 m)

Spout deflector

N/A

N/A

0° to 90° down

Spout rotation

N/A

N/A

260°

Tire size - standard

14L x 16.1FL

14L x 16.1FL

16.5L-16.1SL

Torque protection - driveline

Shear bolt

Shear bolt

Two shear hubs

TRA CTO R R EQU I REM ENTS

G ENERA L SPECI FI CATI ONS

10 | 2 0 1 5

FPX9000 OPTIONAL FEATURES

DIMENSIO NS AN D WEI GHTS

BALE

PROCESSORS

      

Extra cut control bars kit



Flotation tires - 16.5L-16.1SL 6 SOFTRAC II

   

Hydraulic cut control bar kit Square bale kit Scale kit Automatic bale feed system kit Material containment kit Manual flow control kit

Square bale kit Two hydraulic remote kit Scale kit Material containment kit

CPX9000 OPTIONAL FEATURES

Extra cut control bars kit Hydraulic cut control bar kit  Material containment kit  

PLEASE SEND MAKIN’ HAY MY WAY! SPRING 2015

ALL IN A DAY’S WORK

On the Road Again

Set up For Success CHECKLIST Feeding and Eating with Family Pre-season Tips I1 SPRING 2015 - Makin’ Hay

HERITAGE

Founded in 1948, Vermeer is family-owned and markets approximately 100 different agricultural and industrial products worldwide. Come visit and tour our manufacturing operation headquartered in America’s heartland, Pella, Iowa.

Sign up for your FREE subscription or refer a friend and get rollin’! vermeer.com/makinhay

PARTS

When it’s time to make hay, it’s time to make hay. That’s why we operate on the premise that parts and service support doesn’t help tomorrow when you’re in the field today. And we support it with one of the most sophisticated and responsive parts centers in the industry.

SERVICE

Expect top service from our independent authorized dealers backed by factory product support service teams. Our mission is to provide you with a level of experience and expertise that goes far beyond product knowledge, sales training and financing programs.

POST SEASON MAINTENANCE

We know that you count on your equipment to perform day in and day out. Let us help you maintain that high performance with our post-season maintenance programs. Check with your local Vermeer Dealer for exclusive offers each fall including maintenance checks and performance adjustments to ensure you’re ready to go at the start of the next hay season! Programs are offered on select models and vary annually.

FINANCING

Through Vermeer Credit Corporation you and your dealer can determine a payment structure that fits your budget, schedule and needs. For more information on financing options or retail incentives, visit vermeer.com or contact your local dealer.

2015

BALE

PROCESSORS

| 11

2015 BALE PROCESSORS

2015 BALE PROCESSORS

Vermeer Corporation 1410 Vermeer Road East • Pella, IA 50219 800.370.3659 • vermeer.com Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer Dealer for more information on machine specifications. Specifications, descriptions and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the country in which the equipment is used. Vermeer, Vermeer logo, Catapult, Final Cut and Equipped to Do More are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2015 Vermeer Corporation. All Rights Reserved.

LF15078 3/25 OP (5K) / PN#510505097