The pictures included in the present illustrated catalogue, are only intended to show the product and are therefore not binding. The company reserves the right to make in every moment and without prior notice, any modification deemed necessary.
Colour table 1) The standard colour of our equipment is RAL 7040 grey (➔ /39). 2) On demand, other colours are available (see RAL table): RAL 5015 Sky blue (➔ /25). RAL 5002 Blue (➔ /20). RAL 3002 Red (➔ /16). RAL 1003 Yellow (➔ /45). RAL 6029 Mint green (➔ /72). RAL 6018 Green (➔ /71).
2
Tyre changers PN
Description
0-1110.99.01/39
M 42 FS
(400V/3PH/50Hz)
Automatic tyre changer for rims from 11" to 24". Outside locking up to 22". Built-in tubeless inflating device. Mechanical balancing of tool holder shaft. Single speed motor. Air-operated tilting column. Air-filter-nebulizer included.
0-1110.99.02/39 (200-230V/1PH/50Hz)
0-1110.99.04/39 (100-115V/1PH/60Hz)
Supplied with: 1 Bead lever + plastic cover 1 Set of 4 jaw pads for alloy rims 1 Plastic inserts for tool head 1 Brush 1 Operator’s manual
0-1110.99.11/39 (200-230V/3PH/60Hz)
0-1110.99.12/39 (200-230V/1PH/60Hz)
Color: RAL 7040 Grey
0-1110.99.21/39 (230V/3PH/50Hz)
Customisation kit
8-1110.02.79 0-1110.96.01/39
M 42 Automatic tyre changer for rims from 11" to 24". Outside locking up to 22". Mechanical balancing of tool holder shaft. Single speed motor. Air-operated tilting column. Air-filter-nebulizer included.
(400V/3PH/50Hz)
0-1110.96.02/39 (200-230V/1PH/50Hz)
0-1110.96.11/39
Supplied with: 1 Bead lever + plastic cover 1 Set of 4 jaw pads for alloy rims 1 Plastic inserts for tool head 1 Brush 1 Operator’s manual
(200-230V/3PH/60Hz)
0-111096.12/39 (200-230V/1PH/60Hz)
0-1110.96.21/39
Color: RAL 7040 Grey
(230V/3PH/50Hz)
8-1110.02.56
Customisation kit
0-1110.98.02/39
M 41 FS (NO CE)
(200-230V/1PH/50Hz)
Semi-automatic tyre changer with swing-arm for rims from 11" to 24". Outside locking up to 22". Built-in tubeless inflating device with air-tank column. Single speed motor. Air-filter-nebulizer included.
0-1110.98.04/39 (100-115V/1PH/60Hz)
0-1110.98.11/39 (200-230V/3PH/60Hz)
Supplied with: 1 Bead lever + plastic cover 1 Set of 4 jaw pads for alloy rims 1 Plastic inserts for tool head 1 Brush 1 Operator’s manual
Color: RAL 7040 Grey
8-1110.02.57
Customisation kit 3
PN
Description
0-1111.40.01/39
M 41
(400V/3PH/50Hz)
Semi-automatic tyre changer with swing-arm for rims from 11" to 24". Outside locking up to 22". Mechanical balancing of tool holder shaft. Single speed motor. Air-filter-nebulizer included.
0-1111.40.02/39 (200-230V/1PH/50Hz)
0-1111.40.12/39
Supplied with: 1 Bead lever + plastic cover 1 Set of 4 jaw pads for alloy rims 1 Plastic inserts for tool head 1 Brush 1 Operator’s manual
(200-230V/1PH/60Hz)
Color: RAL 7040 Grey
8-1110.03.24
Customisation kit
4
Accessories for tyre changers PN
Description
8-1110.03.43
HELPER 4FD Multipurpose bead lifting/pressing device, RH sided, with three tool arms. Available for M 42 and M 42 FS only.
Customization & Installation kit.
8-1110.03.49
801.262417
PPT Bead clamp. For “RUN FLAT” Tyres. WDK Approved.
801.482338
UPT Universal bead clamp.
8-1110.00.36
GM520 Set of motorcycle wheel adapters. From 15” to 23” / 25”.
801.260402
PS60 Special bead breaker blade for motorcycle wheels.
8-1110.00.42
GA69 Set of adapters for 8”÷9” rims. (Can lock from outside rims until 6”).
8-1110.00.41
GM524 Set of adapters for increasing outside locking of 4” (alloy rims).
5
PN
Description
801.258383
GPS60 Set of 6 plastic covers for bead breaker blade to protect alloy rims during tyre bead breaking.
8-1110.00.44
PCL54 Set of 12 integral plastic jaws pads for protecting alloy rims. Outside/Inside locking.
801.246241
KGL6 Kit of 6 plastic covers for tyre lever to protect alloy rims.
801.254341
PS10 Set of 10 special plastic inserts for tool head.
801.258898
PTH5 Set of 5 special plastic pads for tool head.
801.250309
TCL40 Plastic tool head set to protect alloy rims during tyre mounting and demounting.
801.252083
TS610 Tool head set for wheels from 6" to 10". Specially designed for scooters and small wheels.
6
PN
Description
8-1110.03.62
PGA
8-1110.03.57
PGA2
Tyre inflating gun with BAR scale on pressure gauge. Built-in rubber air supply hose L=1,5 m. EC Homologated.
Tyre inflating gun with BAR and PSI scales on pressure gauge. Additional RILSAN spiralled air supply hose. For extra EC countries only.
NOTE: Further accessories of our full-range are available upon request. For information, please refer to HPA-FAIP picture catalogue. .
B 40 (NO CE) Microprocessor wheel balancer. Illuminated double digital display and keyboard. Manual data input. Automatic start and stop at the end of the spin. 7 programs for alloy rims: ALU std, ALU P. “Shift planes” program (in ALU P). “Hidden weights” program (in ALU P). “Weight division” program (bike programs). Supplied with: 1 Caliper 1 100 gr. weight for self-calibration 1 Operator’s manual
Color: RAL 7040 Grey
Customisation kit
8-2110.01.80
Compulsory accessories for wheel balancers PN
Description
8-2110.01.89
PCM Basic set of universal self-centering 3 cones flange for wheels with central hole from Ø 41 to 103 mm. Composed with: 1 Set of 3-cones self centering 1 Quick ring nut 1 Allen wrench CH 10 1 Threaded hub and extractor
8-2110.01.88
PRC44 Wheel guard complete with support and microswitch. Suitable for: B 40. Mandatory in EC and EFTA countries.
8
Accessories for wheel balancers PN
Description
802.227308
PFC Pliers for attaching balance weights.
8-2110.02.00
CS1 Short cone Ø 55 to 72 mm.
8-2110.00.80
ARF Accessory for off-road wheels with central hole. From hole Ø 101 to 119 mm.
8-2110.00.82
SBC Set of 6 wheel centering bushing. From hole Ø 54 to 75,4 mm.
8-2110.00.89
ARS Racing accessory for sport wheels. To be used with Racing bushing.
8-2110.01.41
DX1/CF1-CF2 Centering accessory for vans and offroad vehicles with centre hole wheels. From hole Ø 117 to 173 mm.
8-2110.00.91
FUC40 Universal flange for all wheels with or without central holes. Supplied with wrenches and caliper (Wheels gauge from Ø 90 to 210 mm.).
8-2110.00.92
BVFF Set of 5 bushings for accurate wheel centering on FUC40 flange.
9
PN
Description
8-2110.00.77
PROBIKE Self-centering flange for motorcycle wheels. The PROBIKE must be completed with specific shaft assembly below and PRA4 (PN 8-2110.01.55).
8-2110.01.55
PRA4 Wheel distance gauge extension. To be added at 8-2110.00.77.
8-2110.00.48
GAC 10 D. 10 M.12 shaft assembly. To be combined with PROBIKE (PN 82110.00.77).
8-2110.00.49
GAC 12 D. 12 M.12 shaft assembly. To be combined with PROBIKE (PN 82110.00.77).
8-2110.00.50
GAC 15 D. 15 M.12 shaft assembly. To be combined with PROBIKE (PN 82110.00.77).
8-2110.00.51
GAC 17 D. 17 M.12 shaft assembly. To be combined with PROBIKE (PN 82110.00.77).
8-2110.00.47
GAC 19 D. 19 M.12 shaft assembly. To be combined with PROBIKE (PN 82110.00.77).
NOTE: Further accessories of our full-range are available upon request. For information, please refer to HPA-FAIP picture catalogue. .
10
Diagram of packing specifications
B A Model
C
Packing type Dimensions (mm.) Net weight Gross weight (A x B x H) (Kg) (Kg) Tyre changers
M 42 FS
Wooden case (A)
1115 x
990 x 1050
265
295
M 42
“
1115 x
990 x 1050
255
285
M 41 FS
“
1115 x
990 x 1050
240
270
M 41
“
1115 x
990 x 1050
2235
265
HELPER 4FD (Arm not installed)
HELPER 4FD (Arm installed)
Carton box on pallet (B)
530 x 1200 x
420
70
110
Carton box on pallet (C)
825 x 1200 x
420
70
110
85
100
9
10
Wheel balancers B 40 PRC 44”
Carton box on pallet (B) Carton box
575 x 920 x 1155 950 x 690 x
11
340
12
13
Designed & Engineered in Italy by Nexion Group. Assembled in China. MESF000158 - EDIT DEPT
