AUGER & BITS
AUGER ATTACHMENT AUGERS AND BITS FOR COMPACT TRACK LOADERS
Available for Models PT-30 PT-50 PT-60
TSR-50 ® Available for Terex Models: TSR-60
TSR-70 PT-30 TSR-80 PT-50 PT-80 TSV-50 PT-60 PT-100G TSV-60 PT-70 PT-100G Forestry TSV-70 PT-80 TSV-80 PT-100 PT-100 Forestry PT-70
Features • A hydraulic auger mounted to a Terex® compact track loader is a quick and efficient way to auger holes up to 36 inches (914 mm) deep with diameters • A hydraulic auger mounted to a Terex® compact track loader is a quick up to 30 inches (762 mm). Two sizes of auger drive units are available to fit all and efficient way to auger holes up to 36 inches (914 mm) deep with ® Terex track diameters up tocompact 30 inches (762loader mm). models. Two sizes of auger drive units are available to fit all Terex® compact track loader models.
• The compact track loader and auger make an deal combination when you
need track to auger many holes, asan fordeal fence posts or when working • The compact loader and augersuch make combination when you on surfaces like lawns, landscaping or over underground sprinkler need to auger many holes, such as for fence posts or when working on systems. surfaces like lawns, landsaping or over underground sprinkler systems. •
Auger drive units are controlled by the machine’s joystick control, allowing
clockwise and counter-clockwise rotation.joystick control, allowing • Auger drive units are controlled by the machine’s clockwise and counter-clockwise rotation.
• Attaches quickly and easily to the loader’s quick attach interface. Hydraulic and connectors areloader’s included. • Attacheshoses quickly and easily to the quick attach interface. Hydraulic hoses and connectors are included.
Auger Drive and Bit Ordering References and Specifications
Drive unit order reference
PT-30
PT-50, PT-60, PT-70, PT-80, PT-100G ,PT-100G Forestry
0402-312
0402-498
Drive type
Chain reduction
Planetary
Drive shaft
Round - 2-9/16” (65 mm)
Hex - 2” (51 mm)
354 lb (160 kg)
330 lb (147 kg)
Bit, 6 in. (152 mm) order reference
0402-220
0403-394
Bit, 9 in. (229 mm) order reference
0403-396
0403-395
Bit, 12 in. (305 mm) order reference
0402-222
0403-406
Bit, 18 in. (457 mm) order reference
0403-469
0403-408
Bit, 24 in. (610 mm) order reference
0403-409
0403-720
Bit, 30 in. (762 mm) order reference
0403-393
0403-410
Drive unit weight
terex.com Effective Date: June 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Auger 0610 PN 280211
QUICK-ATTACH BACKHOE
BACKHOE ATTACHMENT QUICK-ATTACH BACKHOE ATTACHMENTS
Available for Models
Features
PT-30
• Four backhoe attachments are available to closely match each Terex®compact track loader. Each can be outfitted with a variety of buckets.
PT-50
TSR-50
TSR-60 Available for Terex® Models: TSR-70 PT-70 TSR-80 PT-30 PT-80 TSV-50 PT-50 PT-100G PT-60 TSV-60 PT-100G Forestry PT-70 TSV-70 PT-100 TSV-80 PT-100 Forestry PT-60
• Four backhoe attachments are available to closely match each Terex®
• Connection is viatrack the loader. loader’s quick-attach interface a setofofbuckets. pins on the machine compact Each can be outfi tted withplus a variety loader arms. Hydraulic connections are to the loader’s built-in quick-connect auxiliary hydraulic fittings. All necessary hydraulic lines and connectors are included. • Connection is via the loader’s quick-attach interface plus a set of pins on the machine loader arms. Hydraulic connections are to the loader’s built• All but the smallest backhoe attachment from a remote operator in quick-connect auxiliary hydraulic fioperate ttings. All necessary hydraulic linesstation, shown above. The backhoe attachment for the smallest loader (shown on back and connectors are included.
page) has a pivoting control console for operation from inside the standard machine operator • Allstation. but the smallest backhoe attachment operate from a remote operator station, shown above. The backhoe attachment for the smallest loader
• All backhoe attachments include outriggers. (shown on back page) has ahydraulically-extendible pivoting control console for operation from inside the standard machine operator station.
• All backhoe attachments include hydraulically-extendible outriggers.
Backhoe Attachment Ordering References and Specifications Ordering Reference Fits ASV loader Reach below grade, max.
0201-267
0402-752
0402-460
0402-609
PT-30
PT-50,PT-60
PT-70, PT-80
PT-100G
7 ft (2.13 m)
8 ft (2.44 m)
9 ft (2.74 m)
11 ft (3.35 m)
Loading height, max.
60 in. (1524 mm)
70 in. (1778 mm)
82 in. (2083 mm)
99 in. (2515 mm)
Reach, max.
8 ft, 6 in. (2.3 m)
9 ft., 6 in. (2.9 m)
11 ft, 1 in. (3.4 m)
13 ft, 9 in. (4.2 m)
180°
180°
180°
180°
Shipping height
60 in. (1524 mm)
62 in. (1575 mm)
70 in. (1778 mm)
69 in. (1753 mm)
Shipping width
55 in. (1397 mm)
56 in. (1422 mm)
54 in. (1372 mm)
48 in. (1219 mm)
Shipping length
72 in. (1829 mm)
75 in. (1905 mm)
84 in. (2134 mm)
96 in. (2438 mm)
875 lb (397 kg)
1,000 lb (454 kg)
1040 lb (472 kg)
2002 lb (908 kg)
Bucket, 9 in. (229 mm)
0200-397
0200-397
--
--
Bucket, 13 in. (330 mm)
0200-398
0200-398
--
--
Swing arc.
Weight
Bucket, 14 in. (356 mm)
--
--
0403-461
0402-702
Bucket, 16 in. (406 mm)
0200-399
0200-399
--
--
Bucket, 18 in. (457 mm)
--
--
0403-462
0402-703
Bucket, 20 in. (508 mm)
0200-400
0200-400
--
--
Bucket, 24 in. (610 mm)
0200-401
0200-401
0403-463
0402-704
Bucket, 36 in. (914mm)
--
--
0403-464
0402-705
terex.com Effective Date: June 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Backhoe 1010 PN 280212
DOZER BLADE
DOZER BLADE ATTACHMENT DOZER BLADES FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
• Versatile attachment for many excavation, dozing and grading applications.
TSR-50 Available for Terex® Models: PT-50 TSR-60 PT-60 TSR-70 PT-50 PT-70 TSR-80 PT-60 PT-70 PT-80 TSV-50 PT-100G PT-80 TSV-60 PT-100 PT-100G Forestry TSV-70 PT-100 Forestry TSV-80
• Versatile attachment for many excavation, dozing and grading
applications. • Two sizes available to fit most Terex® compact track loader models. • Two sizes available tovia fit two mosthydraulic Terex® compact track loader models. by thumb • Variable angle adjustment cylinders that are controlled switches on the loader-control joystick. • Variable angle adjustment via two hydraulic cylinders that are controlled
• Attaches and easily loader’s quick attach interface. Hydraulic hoses and byquickly thumbswitches on to thethe loader-control joystick. connectors are included and are custom-fitted for Terex® compact track loaders so they are ready toquickly attach.and easily to the loader’s quick attach interface. • Attaches Hydraulic hoses and connectors are included and are custom-fitted for Terex compact track loaders so they are ready to attach.
Dozer Blade Attachments Ordering References and Specifications Fits Terex® model Width (overall) Width, full angle Blade angle (+/-)
0402-502
0402-599
PT-50, PT-60, PT-70
PT-80, PT-100G, PT100G-Forestry
72 in. (1829 mm)
84 in. (2134 mm)
63.5 in. (1613 mm)
74 in. (1880 mm)
30°
30°
Height
24 in. (610 mm)
24 in. (610 mm)
Weight
1,293 lbs (587 kg)
1,452 lbs (659 kg)
10°
10°
.94 in. (24 mm)
.94 in. (24 mm)
Blade tilt (+/-) Moldboard thickness
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Dozer Blade 1010 PN 280213
General Purpose Bucket
GENERAL PURPOSE BUCKET
GENERAL PURPOSE BUCKETS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
TSR-50
PT-50
TSR-60
• Common and versatile attachment for excavation, carrying and loading dirt and other loose materials.
PT-60
TSR-70
PT-70
TSR-80
PT-80 Available for Terex® Models: TSV-50 PT-100G PT-100G Forestry PT-30 PT-50 PT-60 PT-70 PT-80 PT-100 PT-100 Forestry
TSV-60 TSV-70 TSV-80
• Sizes available to fit all Terex® compact track loader models. • Rugged, solid construction with reinforced edges.
• Common and versatile attachment for excavation, carrying and loading dirt and other loose materials. • On most models, the cutting edge is reversible and replaceable. Bolt-on tooth bars are available for all models.
• Sizes available to fit all Terex® compact track loader models.
• Attaches quickly and easily to the loader’s quick attach interface.
• Rugged, solid construction with reinforced edges. • On most models, the cutting edge is reversible and replaceable. Bolt-on tooth bars are available for all models. • Attaches quickly and easily to the loader’s quick attach interface.
General Purpose Bucket Ordering References and Specifications PT-30 Ordering Reference
PT-50
PT-60
PT-70
PT-80
PT-100G & PT-100G Forestry
0304-031
0402-755
0403-446
0402-998
0402-624
0402-624
48 in (1219 mm)
63 in (1600 mm)
67 in (1702 mm)
67 in (1702 mm)
72 in (1829 mm)
72 in (1829 mm)
Length
26 in (654 mm)
32 in (813 mm)
34 in (864 mm)
35 in (889 mm)
35 in (889 mm)
35 in (889 mm)
Height
15.25 in (387 mm)
22 in (559 mm)
22 in (559 mm)
22 in (559 mm)
22 in (559 mm)
22 in (559 mm)
Width
Reversible cutting edge
No
Yes
Yes
Yes
Yes
Yes
Bolt-on tooth bar option reference
0402-430
0402-757
2045-670
2045-670
0402-610
0402-610
Capacity, struck
.25 yd3 (.19 m3)
.47 yd3 (.36 m3)
.47 yd3 (.36 m3)
.50 yd3 (.38 m3)
.55 yd3 (.42 m3)
.55 yd3 (.42 m3)
Capacity, heaped
.33 yd3 (.25 m3)
.57 yd3 (.44 m3)
.57 yd3 (.44 m3)
.60 yd3 (.46 m3)
.66 yd3 (.50 m3)
.66 yd3 (.50 m3)
Weight
155 lbs (70 kg)
495 lbs (225 kg)
510 lbs (231 kg)
595 lbs (270 kg)
710 lbs (322 kg)
710 lbs (322 kg)
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
General Purpose Bucket 1010 PN 280214
MULTI-PURPOSE BUCKET
MULTI-PURPOSE BUCKET MULTI-PURPOSE BUCKET ATTACHMENTS
Available for Models PT-30 PT-50 PT-60
Features
TSR-50 TSR-60Models: Available for Terex ®
TSR-70
PT-30 TSR-80 PT-50 PT-80 TSV-50 PT-60 PT-100G PT-70 TSV-60 PT-80 PT-100G Forestry TSV-70 PT-100 TSV-80 PT-100 Forestry
PT-70
• Multi-purpose buckets are a versatile attachment for use in a wide range of applications, such as construction, landscaping, recycling, agriculture and others. • Multi-purpose buckets are a versatile attachment for use in a wide range
applications, such as construction, landscaping, recycling, agriculture • Use the of multi-purpose bucket to dig, load, grab, doze, level and similar tasks. and others.
• Two hydraulic open bucket and close theload, bucket jaws. Jaws controlled • Use thecylinders multi-purpose to dig, grab, doze, levelare and similar by a switch on the compact track loader’s joystick. Cylinders have guarding for tasks. additional protection. • Two hydraulic cylinders open and close the bucket jaws. Jaws are
controlled a switchtoon the compact track loader’s joystick. Cylinders • Three models are by available more closely match the bucket width to the width have guarding for additional protection. of the loader. • Three models are available to more closely match the bucket width to the width of the loader.
Multi-Purpose Bucket Ordering References and Specifications PT-30
PT-50, PT-60, PT-70
PT-80, PT-100
Order Reference
0402-209
0402-997
0402-006
Capacity, heaped
.25 yd3 (.19 m3)
.63 yd3 (.48 m3)
.75 yd3 (.57 m3)
50 in (1275 mm)
67.5 in (1715 mm)
73.5 in (1867 mm)
26 in (660 mm)
29.8 in (757 mm)
29.8 in (757 mm)
Width Overall height, closed Overall height, open Maximum opening Weight
26.8 in (683 mm)
46 in (1168 mm)
46 in (1168 mm)
21.25 in (540 mm)
33 in (838 mm)
33 in (838 mm)
347 lbs (157 kg)
915 lbs (415 kg)
960 lbs (435 kg)
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Multi-Purpose Bucket 1010 PN 280215
POWER BOX RAKE
POWER BOX RAKE ATTACHMENT POWER BOX RAKE ATTACHMENTS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
TSR-50
PT-50
TSR-60
• Use a power box rake on any Terex® compact track loader to grade, shape, plow, restore trenches, windrow debris, aerate and dry soil, recondition turf, prepare seed beds, and more.
PT-60 PT-70 PT-80
TSR-70 ® Available for Terex Models: TSR-80
TSV-50 PT-30 TSV-60 PT-50 PT-100G Forestry TSV-70 PT-60 TSV-80 PT-70 PT-80 PT-100 PT-100 Forestry PT-100G
® • Hydraulically-driven drum with provides • Use a power box rake on carbide any Terexteeth compact trackoptimum loader toperformance grade, shape, plow, trenches, windrow debris,and aerate dry is soil, and durability. Drumrestore can rotate in either direction rakeand angle hydraulically recondition prepare seed beds, and more. adjustable. Controlturf, of hydraulic functions is by switches on the loader joystick or a switch on the machine dash panel.
• Hydraulically-driven drum with carbide teeth provides optimum
performance and durability. Drum can in either direction andrake rakeor • • Removable and reversible end plates giverotate you the flexibility to box angle is hydraulically adjustable. Control of hydraulic functions by windrow. Pneumatic front tires mounted on swivel casters can be is independently switches on the joystick or a switch on the machine dash panel. adjusted for height andloader length. • Removable andeasily reversible end plates give you the flexibility to box rake • Attaches quickly and to the loader’s quick attach interface. All hydraulic or windrow. Pneumatic front tires mounted on swivel casters can be hoses and connectors are included. independently adjusted for height and length.
• Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Power Box Rake Ordering References and Specifications PT-30
PT-50, PT-60, PT-70, PT-80,PT-100G, PT-100G Forestry
Overall width
58 in (1473 mm)
81 in (2057 mm)
Overall length
51 in (1295 mm)
64 in (1626 mm)
Raking width, no angle
48 in (1220 mm)
72 in (1829 mm)
Raking width, full angle
45 in (1220 mm)
68 in (1727 mm)
Maximum angle adjustment (+/-) Weight Order reference
20°
20°
510 lbs (231 kg)
925 lbs (420 kg)
0402-407
0402-512
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Power Box Rake 1010 280216
ROTARY BROOM
ROTARY BROOM ATTACHMENT
ROTARY BROOM ATTACHMENTS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
TSR-50
PT-50
TSR-60
• Rotary brooms are available for all Terex® compact track loaders, with two models to choose from.
PT-60
TSR-70
PT-70
TSR-80
PT-80 for Terex® Models: TSV-50 Available PT-100G PT-100G Forestry PT-30 PT-50 PT-60 PT-70 PT-80 PT-100 PT-100 Forestry
TSV-60 TSV-70 TSV-80
• The hydraulically-driven broom with heavy-duty nylon and steel bristles can quickly clear dirt, debris and even snow. Manual adjustment of the broom angle lets the operator deposit debris in a windrow ®on either side of the machine.
• Rotary brooms are available for all Terex compact track loaders, with two
models choose from. • Control of to broom rotation is by a thumb-switch on the machine’s joystick or a switch on the machine dash panel.
• The hydraulically-driven broom with heavy-duty nylon and steel bristles
• Attaches quickly anddirt, easily to theand loader’s attach interface. All hydraulic can quickly clear debris evenquick snow. Manual adjustment of the hoses and connectors included.deposit debris in a windrow on either side broom angle lets theare operator
of the machine.
• Control of broom rotation is by a thumbswitch on the machine’s joystick or a switch on the machine dash panel. • Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Rotary Broom Ordering References and Specifications PT-30
PT-50, PT-60, PT-70, PT-80,PT-100G, PT-100G Forestry
Sweep width
48 in (1219 mm)
84 in (2134 mm)
Overall width
55 in (1397 mm)
90 in (2286 mm)
Overall length
51 in (1295 mm)
56 in (1422 mm)
Overall height
25.5 in (648 mm)
36 in (914 mm)
Belt-driven
Hydraulic direct-drive motor
25°
25°
530 lbs (240 kg)
775 lbs (352 kg)
0402-407
0403-825
Broom drive Broom angle adjustment (+/-) Weight Order reference
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Rotary Broom 1010 280217
SCRAP GRAPPLE
SCRAP GRAPPLE ATTACHMENT SCRAP GRAPPLE FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
• Ideal for handling bulky, loose material in construction, recycling, agriculture and similar applications.
PT-50
TSR-50
TSR-60 Available for Terex® Models: TSR-70 PT-70 TSR-80 PT-50 PT-80 TSV-50 PT-60 PT-100G PT-70 TSV-60 PT-80 PT-100G Forestry TSV-70 PT-100 TSV-80 PT-100 Forestry PT-60
• Ideal for handling bulky, loose material in construction, recycling,
• Two sizes available tosimilar fit most Terex® compact track loader models. agriculture and applications. • Rugged, solid construction with a weld-on cutting edge. Pre-drilled holes • Two sizes available to fit most Terex® compact track loader models. accommodate a bolt-on edge. • Rugged, solid construction with a weld-on cutting edge. Pre-drilled holes
• Hydraulic cylinders open and close grapple jaws and are controlled by a switch on accommodate a bolt-on edge. the loader joystick. • Hydraulic cylinders open and close grapple jaws and are controlled by a • Attaches quickly and easily to the loader’s quick attach interface. Hydraulic hoses switch on the loader joystick. and connectors are included. • Attaches quickly and easily to the loader’s quick attach interface. Hydraulic hoses and connectors are included.
Scrap Grapple Ordering References and Specifications PT-50, PT-60, PT-70
PT-80, PT-100G, PT-100G Forestry
Overall width
66 in (1676 mm)
72 in (1905 mm)
Depth
33.5 in (851 mm)
33.5 in (851 mm)
Overall height, closed
27.3 in (93 mm)
27.3 in (693 mm)
Grapple jaw opening
35.8 in (909 mm)
35.8 in (909 mm)
Weight
900 lbs (408 kg)
940 lbs (426 kg)
2045-683
2045-682
Order reference
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Scrap Grapple 1010 280218
SNOW BLADE
SNOW BLADE ATTACHMENT SNOW BLADE ATTACHMENTS
Available for Models
Features
PT-30
• Three plows are available to closely match each Terex® compact track loader model. Each plow includes a reversible, replaceable cutting edge.
TSR-50
PT-50
TSR-60 Available for Terex® Models: PT-60 TSR-70 PT-70 TSR-80
PT-30 PT-50 PT-100G PT-60 PT-100G Forestry PT-70 PT-100 PT-100 Forestry PT-80
TSV-50 TSV-60 TSV-70 TSV-80
® Three plows areshoes available to closely match each compact track • •Adjustable skid allows a variable height of Terex the plow edge for plowing various loader model. Each plow includes a reversible, replaceable cutting edge. surfaces. Four compression trip springs let the plow disengage when encountering solid or heavy obstacles. • Adjustable skid shoes allows a variable height of the plow edge for plowing various surfaces. compression trip springs let thehydraulic plow • Plow angle adjustments areFour made using the attachment’s two cylinders and disengage when solid or heavy are controlled by aencountering thumb-switch on the loaderobstacles. joystick.
• •Attaches quickly and easily the loader’s quick attach interface. All hydraulic hoses Plow angle adjustments aretomade using the attachment’s two hydraulic cylinders and are and connectors arecontrolled included. by a thumbswitch on the loader joystick. • Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Snow Blade Ordering References and Specifications 0402-632 Fits
0402-284
0402-283
PT-30
PT-50, PT-60
PT-70, PT-80, PT-100G, PT-100G Forestry
Width (overall)
72 in (1829 mm)
86 in (2184 mm)
98 in (2489 mm)
Width, full angle
64 in (1626 mm)
74 in (1880 mm)
84 in (2134 mm)
30°
30°
30°
Blade angle (+/-) Height
29 in (737 mm)
31 in (787 mm)
31 in (787 mm)
Weight
850 lbs (386 kg)
1,050 lbs (476 kg)
1,110 lbs (504 kg)
Blade oscillation (+/-) Moldboard thickness
4°
4°
4°
.19 in (5 mm)
.19 in (5 mm)
.19 in (5 mm)
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Snow Blade 1010 280219
SNOW BLOWER
SNOW BLOWER SNOW BLOWER ATTACHMENTS FOR COMPACT TRACK LOADERS
Available for Terex® Models:
AvailablePT-30 for Models PT-30 PT-50 PT-60 PT-70 PT-80
PT-50 TSR-50 PT-60 PT-70 TSR-60 PT-80 TSR-70 PT-100 TSR-80 PT-100 Forestry TSV-50
PT-100G
TSV-60
PT-100G Forestry
TSV-70 TSV-80
• Four sizes available to match the width of each loader model.
Features• The loader’s standard auxiliary hydraulics provide power to the direct drive of the auger and fan. Connection between the loader and
attachment quick-connect hoses that come standard. • Four sizes available is tovia match the width fiofttings eachand loader model.
Augers are protected by a pressure relieve valve, eliminating the need for
shear pins. auxiliary hydraulics provide power to the direct drive of the • The loader’s standard auger and fan. Connection between the loader and attachment is via quick-connect Electric controls are used to rotate the discharge chute and also to adjust fittings •and hoses that come standard. deflection. Chutes are of a low-friction plastic material that helps prevent
plugging of wet, snow.relieve valve, eliminating the need for shear pins. • Augers are protected by heavy a pressure Blowersare include high-carbon steel cutting edges skid • Electric•controls used to rotate the discharge chute andand alsohardened to adjuststeel deflection. shoes. Chutes are of a low-friction plastic material that helps prevent plugging of wet, heavy snow.
• Blowers include high-carbon steel cutting edges and hardened steel skid shoes.
Snow Blower Ordering References and Specifications PT-30
PT-50 & PT-60
PT-80
PT-100 & PT-100 Forestry
Width of cut
53 in (1346 mm)
73 in (1854 mm)
73 in (1854 mm)
85 in (2160 mm)
Height of cut
22 in (560 mm)
29 in (737 mm)
36 in (914 mm)
36 in (914 mm)
Auger diameter
12 in (305 mm)
16 in (406 mm)
18 in (457 mm)
18 in (457 mm)
Fan diameter
16 in (406 mm)
20 in (508 mm)
24 in (610 mm)
24 in (610 mm)
Hydraulic
Hydraulic, 270°
Hydraulic, 270°
Hydraulic, 270°
25 ft (8.7 m)
30 ft (9.1 m)
40 ft (12.2 m)
40 ft (12.2 m)
Chute rotation Casting distance, max Skid shoes
Hardened, adjustable
Hardened
Hardened, adjustable
Hardened, adjustable
Shipping weight
675 lbs (306 kg)
975 lbs (442 kg)
1800 lbs (816 kg)
1,850 lbs (839 kg)
Order reference
0403-242
0403-241
0402-240
0402-239
Optional Extreme Terrain tracks with 10 percent more width and deeper, more aggressive lugs than general purpose tracks are available for the PT-50 and PT-60 models. Extreme Terrain tracks will provide additional traction and flotation in wet, soft conditions as often encountered when snow blowing.
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Snow Blower 1010 280220
TINE GRAPPLE
TINE GRAPPLE ATTACHMENT TINE GRAPPLE ATTACHMENTS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
• Ideal attachment for handling bulky loose material in construction, recycling, agriculture and forestry applications.
PT-50 PT-60 PT-70 PT-80
Available for Terex® Models:
PT-30 PT-100G PT-50 PT-100G Forestry PT-60 PT-70 PT-80 PT-100 PT-100 Forestry
• Sizes available to fit all Terex® compact track loader models.
• Ideal attachment for handling bulky loose material in construction,
recycling, agriculture and forestry applications. • Hydraulic cylinder(s) open and close the grapple jaws and are controlled by a switch on the loader’s joystick. • Sizes available to fit all Terex® compact track loader models.
• Tine forks are replaceable.
• Hydraulic cylinder(s) open and close the grapple jaws and are controlled
byquickly a switchand on the loader’s • Attaches easily to thejoystick. loader’s quick attach interface. All hydraulic hoses and connectors are included. • Tine forks are replaceable.
• Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Tine Grapple Ordering References and Specifications PT-30
PT-50, PT-60, & PT-70
PT-80, PT-100G, PT-100G Forestry
Overall width
43 in (1092 mm)
66 in (1676 mm)
72 in (1905 mm)
Depth
30.5 in (775 mm)
37 in (940 mm)
37 in (940 mm)
Overall height, closed
24 in (610 mm)
28.5 in (724 mm)
28.5 in (724 mm)
Grapple jaw opening
27 in (686 mm)
39.5 in (1003 mm)
39.5 in (1003 mm)
Weight
253 lbs (117 kg)
1,100 lbs (1,504 kg)
1,180 lbs (535 kg)
0402-770
2045-671
0402-587
Order Reference
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Tine Grapple 1010 280221
TRENCHER
TRENCHER ATTACHMENT TRENCHER ATTACHMENTS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
• Heavy-duty chain trenchers let you quickly and efficiently dig trenches while placing • Heavy-duty chain trenchers let trench. you quickly effiof ciently dig trenches spoil material in a windrow along the Two and sizes the trencher are available.
TSR-50 Available for Terex® Models: PT-50 TSR-60 PT-60 TSR-70 PT-30 PT-70 PT-50 TSR-80 PT-60 PT-80 TSV-50 PT-100G PT-70 TSV-60 PT-80 PT-100G Forestry TSV-70 PT-100 TSV-80 PT-100 Forestry
while placing spoil material in a windrow along the trench. Two sizes of
the trencher are available. • Strong, self-aligning boom design uses a grease cylinder chain tensioning system and maintenance-free tapered roller bearings in boom nose. • Strong, self-aligning boom design uses a grease cylinder chain tensioning
and roller bearings in boom nose.and excellent • Trenchersystem housing is maintenance-free designed to givetapered good visibility, fast trench starting trenching capability. • Trencher housing is designed to give good visibility, fast trench starting
and excellent trenching • Trench cleaner improves trenchcapability. clean out.
• Trench cleaner improves trench clean out.
Trencher Ordering References and Specifications PT-30
PT-50, PT-60, PT-70, PT-80, PT-100G, PT-100G Forestry
Overall width
43 in (1092 mm)
51 in (1295 mm)
Trench width
4 in (102 mm)
6 in (152 mm)
Maximum trench depth
30 in (762 mm)
48 in (1219 mm)
Overall height
25 in (635 mm)
25 in (635 mm)
Overall depth
65 in (1651 mm)
84 in (2134 mm)
Weight
512 lbs (232 kg)
1,100 lbs (499 kg)
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Trencher 1010 280222
VARIABLE ANGLE V-BLADE
V-BLADE ATTACHMENT
VARIABLE ANGLE V-BLADE FOR PT-30 COMPACT TRACK LOADER
Available for Models
Features
PT-30
Available for Terex Models: ®
PT-30
• Use the variable angle blade as a V-plow, scoop, straight snow blade or angled snow blade. Two independently-variable blade halves let you quickly configure the • Use theto variable angle blade as a V-plow, scoop, straight snow blade attachment your needs. or angled snow blade. Two independently-variable blade halves let you the attachment to your needs. • Bladequickly halvesconfi are gure controlled hydraulically from the PT-30 joystick control, allowing reconfiguration of the blade without leaving the machine operator station. • Blade halves are controlled hydraulically from the PT-30 joystick control, allowingframe reconfi guration theoscillation blade without the machine • Heavy-duty has fl oat of link, and leaving adjustable cast skidoperator shoes. Trip edge station. features four compression springs. • Heavy-duty frame hasloader float link, oscillation andfor adjustable • Hoses from blade to the are sized ideally the PT-30cast andskid include quick shoes. Trip edge features four compression springs. connect fittings. • Hoses from blade to the loader are sized ideally for the PT-30 and include quick connect fittings.
Variable Angle V-Blade Ordering References and Specifications PT-30 Overall width
74 in (1880 mm)
Blade height
31 in (787 mm)
Blade angle, maximum +/-
30 degrees
Width at full angle
64 in (1626 mm)
Width at full scoop
60 in (1524 mm)
Width at full V
66 in (1676 mm)
Blade oscillation
+/1 4 degrees
Float link angle
+/1 5 degrees
Moldboard thickness
.19 in (5 mm)
Cutting edge
5/8 in x 8 in (17 mm x 203 mm)
Center edge
1 in x 6.5 in (25 mm x 165 mm) rubber
Weight Order reference
1,130 lbs (513 kg) 0403-823
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
V-Blade 1010 280223
VIBRATORY COMPACTOR
VIBRATORY COMPACTOR
VIBRATORY COMPACTOR ATTACHMENT FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
TSR-50
PT-60
TSR-70
PT-70
TSR-80
• Smooth drum vibratory compactor helps achieve soil compaction quickly and economically. • Smooth drum vibratory compactor helps achieve soil compaction quickly and economically. • Dual-direction vibration motor allows optimum compaction whether moving forward or •reverse. Dual-direction vibration motor allows optimum compaction whether
® Models: PT-50Available for TerexTSR-60
PT-50 PT-60 PT-80PT-70 PT-100G PT-80 PT-100G Forestry PT-100 PT-100 Forestry
TSV-50 TSV-60 TSV-70 TSV-80
moving forward or reverse. • Rubber mounts help isolate drum vibration from the loader and operator.
• Rubber mounts help isolate drum vibration from the loader and operator. • Drum oscillates to help follow contour of the ground. • Drum oscillates helpside follow contour of the ground. • Drum is offset on thetoright to allow compaction up against curbs, sidewalks or walls. • Drum is offset on the right side to allow compaction up against curbs, sidewalks or walls.
Vibratory Compactor Ordering References and Specifications PT-50, PT-60, PT-70, PT-80, PT-100, PT-100 Forestry Drum width
72 in (1829 mm)
Overall width
84 in (2134 mm)
Length
42 in (1067 mm)
Overall height, including pushbars Vibratory drive Hydraulic flow range Dynamic force Drum amplitude Compaction energy Weight Order reference
24 in (607 mm) Hydraulic 11 - 22 gpm (42 - 83 lpm) 10,480 lbs (46.4 kN) .054 in (1.37 mm) 313 lbs/in (3719 kg/cm) 1,720 lbs (780 kg) 0403-821
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Vibratory Compactor 1010 280224
BRUSH CUTTER
BRUSH CUTTER
Available for Models
Features
PT-30
TSR-50
PT-50
TSR-60
PT-60
TSR-70
• Heavy-duty brush cutters for Terex® compact track loaders are industrial, deck-type mowers that quickly and efficiently clear a wide range of vegetation. They are ideal for land management, right-of-way and utility line clearing or maintenance, and property developments.
PT-70
TSR-80
PT-80
TSV-50
PT-100G
TSV-60
PT-100G Forestry
TSV-70 TSV-80
• Four models are available and are designed to match the loader width and hydraulic capacity. • These cutters use heavy-duty components and centrifugal force to quickly clear vegetation including standing trees. Cutting blades are reversible and replaceable for fast maintenance. They are a very economical and effective land clearing and maintenance solution. • Attaches quickly to the loader’s quick attach interface. Uses machines standard auxiliary hydraulics. All hydraulic hoses and connectors are included.
Brush Cutter Ordering Reference and Specifications PT-30
PT-50 & PT-60
PT-80
PT-100G & PT-100G Forestry
47 in. (1194 mm)
57 in. (1473 mm)
70 in. (1778 mm)
70 in. (1778 mm)
Maximum material thickness
2 in. (51 mm)
3 in. (76 mm)
4 in. (102 mm)
4 in. (102 mm)
Blades
3, reversible
3, reversible
4, reversible
4, reversible
Maximum cutting width
Hydraulic flow
Low
Low
High
High
Overall width
48 in. (1219 mm)
60 in. (1524 mm)
74 in. (1880 mm)
74 in. (1880 mm)
Shipping weight
675 lb (306 kg)
975 lb (442 kg)
1800 lb (816 kg)
1,850 lb (839 kg)
Order reference
0402-712
0402-856
0402-996
0402-608
The use of brush cutters on Terex® compact track loaders also requires the use a polycarbonate door, which are available for all Terex® compact track loader models. Brush guards are also recommended and available for most loaders. Consult your Terex® dealer for details.
terex.com Effective Date: June 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Brush Cutter 0610 PN 280234
MULCHER
G-Series MULCHER
Available for Models PT-100G Forestry
Features
Powerful drum-style mulcher can quickly and efficiently clear and mulch a 61 in (1549 mm) wide path including trees up to 8 in (203 mm) in diameter.
Planes stumps up to 12 in (305 mm) diameter to ground level. Two-stage cutting chamber with counter teeth and a shear bar for more efficient cutting action.
Drum uses 36 double twin carbide tools, that never require sharpening, for fast efficient processing.
Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Belt drive with automatic tensioner for fast, easy tensioning.
Dimensions and Specifications Mulcher Dimensions
Mulcher Specifications PT-100G Forestry
54” (1371.6 mm)
Cutting width
61 in (1549 mm)
Overall width
78 in (1981 mm)
Overall height, including pushbars
54 in (1372 mm)
Rotor brake
Hydraulic
Cutting tools
36 fixed position double carbide tipped
36”
Average (914.4 tool mm)life
300 - 500 hours
Rotor drive motor
Parker variable displacement, 6.7 in3
Weight
2277 lbs (1033 kg)
Order reference
0404-113 37” (939.8 mm)
78” (1981.2 mm)
54” (1371.6 mm) 36” (914.4 mm)
37” (939.8 mm)
www.terex.com Effective Date: March 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2011 Terex Corporation. Terex Construction 8800 Rostin Road, Southaven, MS 38671 USA Tel +1 (888) 90-TEREX www.terex.com
Mulcher 032011 PN 280235
STUMP GRINDER
STUMP GRINDER
STUMP GRINDER FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
TSR-50
PT-50
TSR-60
• Hydraulically-driven stump grinder with bi-directional cutting wheel allows dual-path operation without moving the machine. Grinder wheel is offset for better visibility.
PT-60 PT-70
® TSR-70 Available for Terex Models:
TSR-80
PT-50 TSV-50 PT-100G PT-60 TSV-60 PT-70 PT-100G Forestry TSV-70 PT-80 TSV-80 PT-100 PT-100 Forestry PT-80
• Thirty-two durable and replaceable carbide teeth through hard stumps • Hydraulically-driven stump grinder withgrinds bi-directional cutting wheelquickly allowsand efficiently.dual-path Can cut aoperation full 55˚ swath up tomoving 8-inches mm) deep in less than minutes. without the(20.3 machine. Grinder wheel is two offset for better visibility. • Direct drive of the cutting wheel means efficient operation without a gearbox. Wheel guard and debris deflector durable are included standard. carbide teeth grinds through hard • Thirty-two and replaceable stumps quickly and efficiently. Can cut a full 55-degree swath up to • Attaches 8-inches quickly to(20.3 the loader’ s quick interface. Uses machines low flow auxiliary mm) deep in attach less than two minutes. hydraulics. All hydraulic hoses and connectors are included. • Direct drive of the cutting wheel means efficient operation without a gearbox. Wheel guard and debris deflector are included standard. • Attaches quickly to the loader’s quick attach interface. Uses machines low flow auxiliary hydraulics. All hydraulic hoses and connectors are included.
Stump Grinder Ordering Reference and Specifications Maximum cutting diameter
32 in. (813 mm)
Maximum cutting depth
8 in. (203 mm) below ground
Cutting arc
55˚
Overall width
74 in. (1880 mm)
Cutter drive
Hydraulic, direct
Cutting teeth
32 fi xed-position, carbide-tipped, replaceable
Cutting wheel speed
590 - 1100 rpm
Weight
540 lb (245 kg)
Order reference
0403-520
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Brush Cutter 0610 PN 280236
Land Leveler
LAND LEVELER ATTACHMENT
Available for Models
Features
PT-30
• Use a land lever attachment on the Terex® PT-30 compact track loader to spread and level material, backfill trenches, remove existing sod and grade existing terrain. • Angled grader blades on the front and rear of the attachment let you level efficiently moving forward and reverse.
Available for Terex® Models:
• Use a land lever attachment on the Terex to spread and level material, backfill tren grade existing Hooks welded onto the leveler accommodate a standardterrain. PT-30 general purpose dirt
• PT-30’s light footprint lets you work on soft, delicate surfaces without leaving ruts.
PT-30
•
bucket so transport of the machine and attachments is easier and requires less trailer space.
• Angled grader blades on the front and re efficiently moving forward and reverse.
• PT-30’s light footprint lets you work on s leaving ruts.
• Hooks welded onto the leveler accommo purpose dirt bucket so transport of the m
Land Leveler Ordering References and Specifications PT-30 Overall width
54 in. (1372 mm)
Overall length
34 in. (864 mm)
Overall height
16.75 in. (425 mm)
Weight Order reference
200 lb (91 kg) 0402-310
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Land Leveler 1010 PN 280237
PALLET FORK
PALLET FORK ATTACHMENT PALLET FORKS FOR COMPACT TRACK LOADERS
Available for Models
Features
PT-30
• Versatile attachment for lifting and moving bundled objects.
PT-50
TSR-50
TSR-60 Available for Terex® Models: TSR-70 PT-70 TSR-80 PT-30 PT-80 TSV-50 PT-50 PT-100G PT-60 TSV-60 PT-70 PT-100G Forestry TSV-70 PT-80 TSV-80 PT-100 PT-100 Forestry PT-60
• Three• sizes available to fit all Terex® compact track loader models. Versatile attachment for lifting and moving palletized or bundled objects. • Tine spacing is adjustable to fit various® pallets and objects.
• Three sizes available to fit all Terex compact track loader models.
• Back spill plate help keep material from spilling back onto the machine when Tine spacing is adjustable to fiallows t various pallets and objects. tilted•back. Openings in spill plate better visibility to the fork tips from the operator station. • Back spill plate help keep material from spilling back onto the machine when tiltedand back. Openings spill plate allows betterinterface. visibility to the fork • Attaches quickly easily to theinloader’s quick attach tips from the operator station. • Attaches quickly and easily to the loader’s quick attach interface.
Pallet Fork Attachment Ordering References and Specifications 0402-304 Fits Terex model
0402-768
0402-585
PT-30
PT-50, PT-60
PT-70, PT-80, PT-100G
42.75 in. (1086 mm)
45.5 in. (1156 mm)
54.5 in. (1384 mm)
Frame height
35 in. (890 mm)
40 in. (1016 mm)
40 in. (1016 mm)
Overall width
52 in. (1320 mm)
55 in. (1397 mm)
63 in. (1600 mm)
Overall height
38 in. (965 mm)
39.5 in. (1003 mm)
39.5 in. (1003 mm)
Overall depth
46.5 in. (1181 mm)
52.5 in. (1334 mm)
58.5 in. (1486 mm)
®
Frame width
Minimum tine space
11 in. (279 mm)
13 in. (330 mm)
13 in. (330 mm)
Maximum tine space
42.25 in. (1073 mm)
45 in. (1143 mm)
54 in. (1372 mm)
Tine length
36 in. (914 mm)
42 in. (1067 mm)
48 in. (1219 mm)
Weight
345 lb (156 kg)
455 lb (206 kg)
550 lb (250 kg)
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Pallet Fork 1010 PN 280238
ROTARY TILLER
ROTARY TILLER ATTACHMENT
ROTARY TILLER ATTACHMENT FOR PT-30 COMPACT TRACK LOADER
Available for Models
Features
PT-30
• The rotary tiller uses hardened carbon steel tines to turn hard, compacted ground into soft, workable soil. This attachment can help reclaim hard, infertile soil for use as gardens, landscaping and agricultural applications.
Available for Terex® Model: PT-30
• An efficient direct drive system uses the PT-30’s auxiliary hydraulic system to power the tiller without the use of chains or belts. • The rotary tiller uses hardened carbon steel tines to turn hard, compacted ground into soft, workable soil. and Thiscounter-clockwise. attachment can helpTiller reclaim hard, is • Tiller can be turned either clockwise operation infertile for use as gardens, landscaping andor agricultural applications. controlled by asoil thumb switch on the loader’s joystick a switch on the dash panel. • Attaches easily tosystem the loader’s quick attachauxiliary interface. All hydraulic • Anquickly efficientand direct drive uses the PT-30’s hydraulic systemhoses and connectors are tiller included. to power the without the use of chains or belts. • Tiller can be turned either clockwise and counter-clockwise. Tiller operation is controlled by a thumb switch on the loader’s joystick or a switch on the dash panel. • Attaches quickly and easily to the loader’s quick attach interface. All hydraulic hoses and connectors are included.
Rotary Tiller Ordering References and Specifications PT-30 Frame width
53.5 in (1359 mm)
Tilling width
48 in (1219 mm)
Tilling depth
5 in (127 mm)
Overall height
22 in (559 mm)
Weight
340 lbs (154 kg)
Order reference
0402-405
terex.com Effective Date: October 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation. 8800 Rostin Road, Southaven, MS 38671 USA 1.888.90.TEREX (83739)
Rotary Tiller 1010 280239